Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
TupleDescCopy needs to have the same effects as CreateTupleDescCopy in
that, since it doesn't copy constraints, it should clear the per-attribute
fields associated with them. Oversight in commit cc5f81366.
Since TupleDescCopy has already established the presumption that it
can just flat-copy the entire attribute array in one go, propagate
that approach into CreateTupleDescCopy and CreateTupleDescCopyConstr.
(I'm suspicious that this would lead to valgrind complaints if we
had any trailing padding in the struct, but we do not, and anyway
fixing that seems like a job for a separate commit.)
Add some better comments.
Thomas Munro, reviewed by Vik Fearing, some additional hacking by me
Discussion: https://postgr.es/m/CAEepm=0NvOGZ8B6GbQyQe2C_c2m3LKJ9w=8OMBaYRLgZ_Gw6Nw@mail.gmail.com
Tuples can have type RECORDOID and a typmod number that identifies a blessed
TupleDesc in a backend-private cache. To support the sharing of such tuples
through shared memory and temporary files, provide a typmod registry in
shared memory.
To achieve that, introduce per-session DSM segments, created on demand when a
backend first runs a parallel query. The per-session DSM segment has a
table-of-contents just like the per-query DSM segment, and initially the
contents are a shared record typmod registry and a DSA area to provide the
space it needs to grow.
State relating to the current session is accessed via a Session object
reached through global variable CurrentSession that may require significant
redesign further down the road as we figure out what else needs to be shared
or remodelled.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Previously, tuple descriptors were stored in chains keyed by a fixed size
array of OIDs. That meant there were effectively two levels of collision
chain -- one inside and one outside the hash table. Instead, let dynahash.c
look after conflicts for us by supplying a proper hash and equal function
pair.
This is a nice cleanup on its own, but also simplifies followup
changes allowing blessed TupleDescs to be shared between backends
participating in parallel query.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm%3D34GVhOL%2BarUx56yx7OPk7%3DqpGsv3CpO54feqjAwQKm5g%40mail.gmail.com
TupleDesc's attributes were already stored in contiguous memory after the
struct. Go one step further and get rid of the array of pointers to
attributes so that they can be stored in shared memory mapped at different
addresses in each backend. This won't work for TupleDescs with contraints
and defaults, since those point to other objects, but for many purposes
only attributes are needed.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
This is useful infrastructure for an upcoming proposed patch to
allow the WAL segment size to be changed at initdb time; tools like
pg_basebackup need the ability to interrogate the server setting.
But it also doesn't seem like a bad thing to have independently of
that; it may find other uses in the future.
Robert Haas and Beena Emerson. (The original patch here was by
Beena, but I rewrote it to such a degree that most of the code
being committed here is mine.)
Discussion: http://postgr.es/m/CA+TgmobNo4qz06wHEmy9DszAre3dYx-WNhHSCbU9SAwf+9Ft6g@mail.gmail.com
equalTupleDescs() neglected both of these ConstrCheck fields, and
CreateTupleDescCopyConstr() neglected ccnoinherit. At this time, the
only known behavior defect resulting from these omissions is constraint
exclusion disregarding a CHECK constraint validated by an ALTER TABLE
VALIDATE CONSTRAINT statement issued earlier in the same transaction.
Back-patch to 9.2, where these fields were introduced.
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
The C and POSIX standards state that strncpy's behavior is undefined when
source and destination areas overlap. While it remains dubious whether any
implementations really misbehave when the pointers are exactly equal, some
platforms are now starting to force the issue by complaining when an
undefined call occurs. (In particular OS X 10.9 has been seen to dump core
here, though the exact set of circumstances needed to trigger that remain
elusive. Similar behavior can be expected to be optional on Linux and
other platforms in the near future.) So tweak the code to explicitly do
nothing when nothing need be done.
Back-patch to all active branches. In HEAD, this also lets us get rid of
an exception in valgrind.supp.
Per discussion of a report from Matthias Schmitt.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
Because permissions are assigned to element types, not array types,
complaining about permission denied on an array type would be
misleading to users. So adjust the reporting to refer to the element
type instead.
In order not to duplicate the required logic in two dozen places,
refactor the permission denied reporting for types a bit.
pointed out by Yeb Havinga during the review of the type privilege
feature
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
Split the old typenameTypeId() into two functions: A new typenameTypeId() that
returns only a type OID, and typenameTypeIdAndMod() that returns type OID and
typmod. This isolates call sites better that actually care about the typmod.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
Attributes can now have options, just as relations and tablespaces do, and
the reloptions code is used to parse, validate, and store them. For
simplicity and because these options are not performance critical, we store
them in a separate cache rather than the main relcache.
Thanks to Alex Hunsaker for the review.
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
as those for inherited columns; that is, it's no longer allowed for a child
table to not have a check constraint matching one that exists on a parent.
This satisfies the principle of least surprise (rows selected from the parent
will always appear to meet its check constraints) and eliminates some
longstanding bogosity in pg_dump, which formerly had to guess about whether
check constraints were really inherited or not.
The implementation involves adding conislocal and coninhcount columns to
pg_constraint (paralleling attislocal and attinhcount in pg_attribute)
and refactoring various ALTER TABLE actions to be more like those for
columns.
Alex Hunsaker, Nikhil Sontakke, Tom Lane
even in code paths where we don't pay any subsequent attention to the typmod
value. This seems needed in view of the fact that 8.3's generalized typmod
support will accept a lot of bogus syntax, such as "timestamp(foo)" or
"record(int, 42)" --- if we allow such things to pass without comment,
users will get confused. Per a recent example from Greg Stark.
To implement this in a way that's not very vulnerable to future
bugs-of-omission, refactor the API of parse_type.c's TypeName lookup routines
so that typmod validation is folded into the base lookup operation. Callers
can still choose not to receive the encoded typmod, but we'll check the
decoration anyway if it's present.
Andres Freund
Amit Kapila
Andrew Dunstan
Tom Lane
Bruce Momjian
Peter Eisentraut
Robert Haas
Noah Misch
Greg Stark
Alvaro Herrera
Magnus Hagander