When aborting remote transaction or sending cancel request to a remote server,
postgres_fdw calls pgfdw_get_cleanup_result() to wait for the result of
transaction abort query or cancel request to arrive. It fails to get the result
if the timeout expires or a connection trouble happens.
Previously postgres_fdw reported no warning message even when the timeout
expired or a connection trouble happened in pgfdw_get_cleanup_result().
This could make the troubleshooting harder when such an event occurred.
This commit makes pgfdw_get_cleanup_result() tell its caller what trouble
(timeout or connection error) occurred, on failure, and also makes its caller
report the proper warning message based on that information.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/15aa988c-722e-ad3e-c936-4420c5b2bfea@oss.nttdata.com
pgfdw_report_error() in postgres_fdw gets a message from PGresult or
PGconn to report an error received from a remote server. Previously
if it could get a message from neither of them, it reported empty
message unexpectedly. The cause of this issue was that pgfdw_report_error()
didn't handle properly the case where no message could be obtained
and its local variable message_primary was set to '\0'.
This commit improves pgfdw_report_error() so that it reports the message
"could not obtain ..." when it gets no message and message_primary
is set to '\0'. This is the same behavior as when message_primary is NULL.
dblink_res_error() in dblink has the same issue, so this commit also
improves it in the same way.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/477c16c8-7ea4-20fc-38d5-ed3a77ed616c@oss.nttdata.com
psql's lexer has historically deleted dash-dash (single-line) comments
from what's collected and sent to the server. This is inconsistent
with what it does for slash-star comments, and people have complained
before that they wish such comments would be captured in the server log.
Undoing the decision completely seems like too big a behavioral change,
however. In particular, comments on lines preceding the start of a
query are generally not thought of as being part of that query.
What we can do to improve the situation is to capture comments that
are clearly *within* a query, that is after the first non-whitespace,
non-comment token but before the query's ending semicolon or backslash
command. This is a nearly trivial code change, and it affects only a
few regression test results.
(It is tempting to try to apply the same rule to slash-star comments.
But it's hard to see how to do that without getting strange history
behavior for comments that cross lines, especially if the user then
starts a new query on the same line as the star-slash. In view of
the lack of complaints, let's leave that case alone.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
fsstate in process_pending_requests (in postgres_fdw.c) was added in
8998e3cafa as an assertion-only variable, 1ec7fca859 stated using
the variable outside of assertions.
rd_index in get_index_column_opclass (in lsyscache.c) was introduced
in 2a6368343f, and then promptly used in the fix commit 7e04160390
shortly thereafter.
This removes the PG_USED_FOR_ASSERTS_ONLY variable decoration from
the above mentioned variables.
Reviewed-by: Greg Nancarrow <gregn4422@gmail.com>
Discussion: https://postgr.es/m/F959106C-0F21-43A5-B2AE-D007D51ACBEE@yesql.se
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
Memoize would always use the hash equality operator for the cache key
types to determine if the current set of parameters were the same as some
previously cached set. Certain types such as floating points where -0.0
and +0.0 differ in their binary representation but are classed as equal by
the hash equality operator may cause problems as unless the join uses the
same operator it's possible that whichever join operator is being used
would be able to distinguish the two values. In which case we may
accidentally return in the incorrect rows out of the cache.
To fix this here we add a binary mode to Memoize to allow it to the
current set of parameters to previously cached values by comparing
bit-by-bit rather than logically using the hash equality operator. This
binary mode is always used for LATERAL joins and it's used for normal
joins when any of the join operators are not hashable.
Reported-by: Tom Lane
Author: David Rowley
Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us
Backpatch-through: 14, where Memoize was added
This commit adds a set of functions able to look at the contents of
various paths related to replication slots:
- pg_ls_logicalsnapdir, for pg_logical/snapshots/
- pg_ls_logicalmapdir, for pg_logical/mappings/
- pg_ls_replslotdir, for pg_replslot/<slot_name>/
These are intended to be used by monitoring tools. Unlike pg_ls_dir(),
execution permission can be granted to non-superusers. Roles members of
pg_monitor gain have access to those functions.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CALj2ACWsfizZjMN6bzzdxOk1ADQQeSw8HhEjhmVXn_Pu+7VzLw@mail.gmail.com
Commit 81d5995b4b introduced more fine-grained errormessages for
incorrect relkinds for publication, while unlogged and temporary
tables were reported with using the same message. This provides
separate error messages for these types of relpersistence.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Jeevan Ladhe <jeevan.ladhe@enterprisedb.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CALj2ACW9S=AswyQHjtO6WMcsergMkCBTtzXGrM8DX26DzfeTLQ@mail.gmail.com
When deparsing an expression of the form "remote_var OP constant",
we'd normally apply a cast to the constant to make sure that the
remote parser thinks it's of the same type we do. However, doing
so is often not necessary, and it causes problems if the user has
intentionally declared the local column as being of a different
type than the remote column. A plausible use-case for that is
using text to represent a type that's an enum on the remote side.
A comparison on such a column will get shipped as "var = 'foo'::text",
which blows up on the remote side because there's no enum = text
operator. But if we simply leave off the explicit cast, the
comparison will do exactly what the user wants.
It's possible to do this without major risk of semantic problems, by
relying on the longstanding parser heuristic that "if one operand of
an operator is of type unknown, while the other one has a known type,
assume that the unknown operand is also of that type". Hence, this
patch leaves off the cast only if (a) the operator inputs have the same
type locally; (b) the constant will print as a string literal or NULL,
both of which are initially taken as type unknown; and (c) the non-Const
input is a plain foreign Var. Rule (c) guarantees that the remote
parser will know the type of the non-Const input; moreover, it means
that if this cast-omission does cause any semantic surprises, that can
only happen in cases where the local column has a different type than
the remote column. That wasn't guaranteed to work anyway, and this
patch should represent a net usability gain for such cases.
One point that I (tgl) remain slightly uncomfortable with is that we
will ignore an implicit RelabelType when deciding if the non-Const input
is a plain Var. That makes it a little squishy to argue that the remote
should resolve the Const as being of the same type as its Var, because
then our Const is not the same type as our Var. However, if we don't do
that, then this hack won't work as desired if the user chooses to use
varchar rather than text to represent some remote column. That seems
useful, so do it like this for now. We might have to give up the
RelabelType-ignoring bit if any problems surface.
Dian Fay, with review and kibitzing by me
Discussion: https://postgr.es/m/C9LU294V7K4F.34LRRDU449O45@lamia
Commit 57e3c5160b added a new GiST bool opclass, but it used gbtreekey4
to store the data, which left two bytes undefined, as reported by skink,
our valgrind animal. There was a bit more confusion, because the opclass
also used gbtreekey8 in the definition.
Fix by defining a new gbtreekey2 struct, and using it in all the places.
Discussion: https://postgr.es/m/CAE2gYzyDKJBZngssR84VGZEN=Ux=V9FV23QfPgo+7-yYnKKg4g@mail.gmail.com
Re-ordering the #include's is a bit problematic here because
libpq/libpq-be.h needs to include <openssl/ssl.h>. Instead,
let's #undef the unwanted macro after all the #includes.
This is definitely uglier than the other way, but it should
work despite possible future header rearrangements.
(A look at the openssl headers indicates that X509_NAME is the
only conflicting symbol that we use.)
In passing, remove a related but long-incorrect comment in
pg_backup_archiver.h.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
Adds bool opclass to btree_gist extension, to allow creating GiST
indexes on bool columns. GiST indexes on a single bool column don't seem
particularly useful, but this allows defining exclusion constraings
involving a bool column, for example.
Author: Emre Hasegeli
Reviewed-by: Andrey Borodin
Discussion: https://postgr.es/m/CAE2gYzyDKJBZngssR84VGZEN=Ux=V9FV23QfPgo+7-yYnKKg4g@mail.gmail.com
Expand the checks of toasted attributes to complain if the rawsize is
overlarge. For compressed attributes, also complain if compression
appears to have expanded the attribute or if the compression method is
invalid.
Mark Dilger, reviewed by Justin Pryzby, Alexander Alekseev, Heikki
Linnakangas, Greg Stark, and me.
Discussion: http://postgr.es/m/8E42250D-586A-4A27-B317-8B062C3816A8@enterprisedb.com
pgcrypto had internal implementations of some encryption algorithms,
as an alternative to calling out to OpenSSL. These were rarely used,
since most production installations are built with OpenSSL. Moreover,
maintaining parallel code paths makes the code more complex and
difficult to maintain.
This patch removes these internal implementations. Now, pgcrypto is
only built if OpenSSL support is configured.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/0b42f1df-8cba-6a30-77d7-acc241cc88c1%40enterprisedb.com
In the same spirit as 6301c3ada, fix some more places where we were
using list_delete_first() in a loop and thereby risking O(N^2)
behavior. It's not clear that the lists manipulated in these spots
can get long enough to be really problematic ... but it's not clear
that they can't, either, and the fixes are simple enough.
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Windows fails on a request to read() more than INT_MAX bytes,
and perhaps other platforms could have similar issues. Let's
adjust this code to read at most 1GB per call.
(One would not have thought the file could get that big, but now
we have a field report of trouble, so it can. We likely ought to
add some mechanism to limit the size of the query-texts file
separately from the size of the hash table. That is not this
patch, though.)
Per bug #17254 from Yusuke Egashira. It's been like this for
awhile, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17254-a926c89dc03375c2@postgresql.org
Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
The foreign data wrapper's validator function provides a HINT message with
list of valid options for the object specified in CREATE or ALTER command,
when the option given in the command is invalid. Previously
postgresql_fdw_validator() and the validator functions for postgres_fdw and
dblink_fdw worked in that way even there were no valid options in the object,
which could lead to the HINT message with empty list (because there were
no valid options). For example, ALTER FOREIGN DATA WRAPPER postgres_fdw
OPTIONS (format 'csv') reported the following ERROR and HINT messages.
This behavior was confusing.
ERROR: invalid option "format"
HINT: Valid options in this context are:
There is no such issue in file_fdw. The validator function for file_fdw
reports the HINT message "There are no valid options in this context."
instead in that case.
This commit improves postgresql_fdw_validator() and the validator functions
for postgres_fdw and dblink_fdw so that they do likewise. For example,
this change causes the above ALTER FOREIGN DATA WRAPPER command to
report the following messages.
ERROR: invalid option "nonexistent"
HINT: There are no valid options in this context.
Author: Kosei Masumura
Reviewed-by: Bharath Rupireddy, Fujii Masao
Discussion: https://postgr.es/m/557d06cebe19081bfcc83ee2affc98d3@oss.nttdata.com
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
Have verify_heapam.c treat unlogged relations as if they were simply
empty when in Hot Standby mode. This brings it in line with
verify_nbtree.c, which has handled unlogged relations in the same way
since bugfix commit 6754fe65a4. This was an oversight in commit
866e24d47d, which extended contrib/amcheck to check heap relations.
In passing, lower the verbosity used when reporting that a relation has
been skipped like this, from NOTICE to DEBUG1. This is appropriate
because the skipping behavior is only an implementation detail, needed
to work around the fact that unlogged tables don't have smgr-level
storage for their main fork when in Hot Standby mode.
Affected unlogged relations should be considered "trivially verified",
not skipped over. They are verified in the same sense that a totally
empty relation can be verified. This behavior seems least surprising
overall, since unlogged relations on a replica will initially be empty
if and when the replica is promoted and Hot Standby ends.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzk_pukOFY7JmdiFLsrz+Pd3V8OwgC1TH2Vd5BH5ZgK4bA@mail.gmail.com
Backpatch: 14-, where heapam verification was introduced.
Commit c7b7311f6 adjusted conversion_error_callback to always use
information from the query's rangetable, to avoid doing catalog lookups
in an already-failed transaction. However, as a result of the utterly
inadequate documentation for make_tuple_from_result_row, I failed to
realize that fsstate could be NULL in some contexts. That led to a
crash if we got a conversion error in such a context. Fix by falling
back to the previous coding when fsstate is NULL. Improve the
commentary, too.
Per report from Andrey Borodin. Back-patch to 9.6, like the previous
patch.
Discussion: https://postgr.es/m/08916396-55E4-4D68-AB3A-BD6066F9E5C0@yandex-team.ru
When the newest version is loaded, the backend would load objects from
the oldest complete SQL file (here 1.4) and then update to the latest
version with transition scripts (up to 1.9 currently). This provides
some coverage for upgrades of pg_stat_statements, but there is no test
to show how things have changed across each version.
This adds a couple of tests for the upgrade paths using objects from
each version supported, stressing the objects whose behaviors have
changed across each version supported.
Author: Erica Zhang
Reviewed-by: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/tencent_BBA974AFF61379F2345E782FD6C55891950A@qq.com
It turns out that the instability complained of in commit d3c09b9b1
has an embarrassingly simple explanation. The test script waits for
the standby to flush incoming WAL to disk, but it should wait for
the WAL to be replayed, since we are testing for the effects of that
to be visible.
While at it, use wait_for_catchup instead of reinventing that logic,
and adjust $Test::Builder::Level to improve future error reports.
Back-patch to v12 where the necessary infrastructure came in
(cf. aforesaid commit). Also back-patch 7d1aa6bf1 so that the
test will actually get run.
Discussion: https://postgr.es/m/2854602.1632852664@sss.pgh.pa.us
Sequences were left out of the list of relation kinds that
verify_heapam knew how to check, though it is fairly trivial to allow
them. Doing that, and while at it, updating pg_amcheck to include
sequences in relations matched by table and relation patterns.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/81ad4757-92c1-4aa3-7bee-f609544837e3%40enterprisedb.com
These tests were disabled back in 2018 (commit d3c09b9b1) because of
failures observed in the buildfarm. I've not been able to reproduce
any failure on longfin's host, though, so I'm curious whether or to
what extent we've fixed the problem. Let's re-enable it (in HEAD
only) and see what blows up.
Discussion: https://postgr.es/m/2769443.1632773967@sss.pgh.pa.us
Several mistakes have piled in the code comments over the time,
including incorrect grammar, function names and simple typos. This
commit takes care of a portion of these.
No backpatch is done as this is only cosmetic.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210924215827.GS831@telsasoft.com
In postgres_fdw, pgfdw_xact_callback() and pgfdw_subxact_callback()
callback functions do almost the same thing to rollback remote toplevel-
and sub-transaction. But previously their such rollback logics were
implemented separately in each function and in different way. Which
could decrease the readability and maintainability of the code.
To fix the issue, this commit creates the common function to rollback
remote transactions, and makes those callback functions use it. Which
allows us to avoid unnecessary code duplication.
Author: Fujii Masao
Reviewed-by: Zhihong Yu, Bharath Rupireddy
Discussion: https://postgr.es/m/62fbb63a-d46c-fb47-a56d-f6be1909aa44@oss.nttdata.com
An elog that reports the value of a transaction ID stored on a deleted
nbtree page was added by commit e5d8a999, which taught page deletion to
store full 64-bit XIDs. It seems very chatty on further reflection, so
lower its elevel from NOTICE to DEBUG2.
Author: Peter Geoghegan <pg@bowt.ie>
Backpatch: 14-, just like the nbtree XID enhancement.
This switches the default ACL to what the documentation has recommended
since CVE-2018-1058. Upgrades will carry forward any old ownership and
ACL. Sites that declined the 2018 recommendation should take a fresh
look. Recipes for commissioning a new database cluster from scratch may
need to create a schema, grant more privileges, etc. Out-of-tree test
suites may require such updates.
Reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/20201031163518.GB4039133@rfd.leadboat.com
The Value node struct is a weird construct. It is its own node type,
but most of the time, it actually has a node type of Integer, Float,
String, or BitString. As a consequence, the struct name and the node
type don't match most of the time, and so it has to be treated
specially a lot. There doesn't seem to be any value in the special
construct. There is very little code that wants to accept all Value
variants but nothing else (and even if it did, this doesn't provide
any convenient way to check it), and most code wants either just one
particular node type (usually String), or it accepts a broader set of
node types besides just Value.
This change removes the Value struct and node type and replaces them
by separate Integer, Float, String, and BitString node types that are
proper node types and structs of their own and behave mostly like
normal node types.
Also, this removes the T_Null node tag, which was previously also a
possible variant of Value but wasn't actually used outside of the
Value contained in A_Const. Replace that by an isnull field in
A_Const.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5ba6bc5b-3f95-04f2-2419-f8ddb4c046fb@enterprisedb.com
Commit 449ab63505 added the tests that check that postgres_fdw.application_name
GUC works as expected. But they were unstable and caused some buildfarm
members to report the failure. This commit reverts those unstable tests.
Reported-by: Tom Lane as per buildfarm
Discussion: https://postgr.es/m/3220909.1631054766@sss.pgh.pa.us
All the code paths simplified here were already using a boolean or used
an expression that led to zero or one, making the extra bits
unnecessary.
Author: Justin Pryzby
Reviewed-by: Tom Lane, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/20210428182936.GE27406@telsasoft.com
This commit adds postgres_fdw.application_name GUC which specifies
a value for application_name configuration parameter used
when postgres_fdw establishes a connection to a foreign server.
This GUC setting always overrides application_name option of
the foreign server object. This GUC is useful when we want to
specify our own application_name per remote connection.
Previously application_name of a remote connection could be set
basically only via options of a server object. But which meant that
every session connecting to the same foreign server basically
should use the same application_name. Also if we want to change
the setting, we had to execute "ALTER SERVER ... OPTIONS ..." command.
It was inconvenient.
Author: Hayato Kuroda
Reviewed-by: Masahiro Ikeda, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
Avoid repeating fragments of the query we're building, along the
same lines as recent cleanup in pg_dump. I got annoyed about this
because aa769f80e broke my pending patch to change postgres_fdw's
collation handling, due to each of us having incompletely done
this same refactoring. Let's finish that job in hopes of having
a more stable base.
map and grep are not intended to be used as mutators, iterating
with side-effects should be done with for or foreach loops. This
fixes the one occurrence of the pattern, and bumps the perlcritic
policy to severity 5 for the map and grep policies.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/87fsvzhhc4.fsf@wibble.ilmari.org
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
The current code could do unnecessary calls to isinf() (two for the
argument values all the time while one could be sufficient in some
cases). zero_is_valid was never used but the result value was still
checked on 0 in the first position of the check.
This is similar to 607f8ce. btree_gist has just copy-pasted the code
doing those checks from the backend float4/8 code, as of the macro
CHECKFLOATVAL(), to do the work.
Author: Haiying Tang
Discussion: https://postgr.es/m/OS0PR01MB611358E3A7BC3C2F874AC36BFBF39@OS0PR01MB6113.jpnprd01.prod.outlook.com
As a result of confusion about whether the "char" type is signed or
unsigned, scans for index searches like "col < 'x'" or "col <= 'x'"
would start at the middle of the index not the left end, thus missing
many or all of the entries they should find. Fortunately, this
is not a symptom of index corruption. It's only the search logic
that is broken, and we can fix it without unpleasant side-effects.
Per report from Jason Kim. This has been wrong since btree_gin's
beginning, so back-patch to all supported branches.
Discussion: https://postgr.es/m/20210810001649.htnltbh7c63re42p@jasonk.me
OpenSSL 3 introduced the concept of providers to support modularization,
and moved the outdated ciphers to the new legacy provider. In case it's
not loaded in the users openssl.cnf file there will be a lot of regress
test failures, so add alternative outputs covering those.
Also document the need to load the legacy provider in order to use older
ciphers with OpenSSL-enabled pgcrypto.
This will be backpatched to all supported version once there is sufficient
testing in the buildfarm of OpenSSL 3.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/FEF81714-D479-4512-839B-C769D2605F8A@yesql.se
The PX layer in pgcrypto is handling digest padding on its own uniformly
for all backend implementations. Starting with OpenSSL 3.0.0, DecryptUpdate
doesn't flush the last block in case padding is enabled so explicitly
disable it as we don't use it.
This will be backpatched to all supported version once there is sufficient
testing in the buildfarm of OpenSSL 3.
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/FEF81714-D479-4512-839B-C769D2605F8A@yesql.se
Identifying the precise match locations for parenthesized subexpressions
is a fairly expensive task given the way our regexp engine works, both
at regexp compile time (where we must create an optimized NFA for each
parenthesized subexpression) and at runtime (where determining exact
match locations requires laborious search).
Up to now we've made little attempt to optimize this situation. This
patch identifies cases where we know at compile time that we won't
need to know subexpression match locations, and teaches the regexp
compiler to not bother creating per-subexpression regexps for
parenthesis pairs that are not referenced by backrefs elsewhere in
the regexp. (To preserve semantics, we obviously still have to
pin down the match locations of backref references.) Users could
have obtained the same results before this by being careful to
write "non capturing" parentheses wherever possible, but few people
bother with that.
Discussion: https://postgr.es/m/2219936.1628115334@sss.pgh.pa.us
postgres_fdw imported generated columns from the remote tables as plain
columns, and caused failures like "ERROR: cannot insert a non-DEFAULT
value into column "foo"" when inserting into the foreign tables, as it
tried to insert values into the generated columns. To fix, we do the
following under the assumption that generated columns in a postgres_fdw
foreign table are defined so that they represent generated columns in
the underlying remote table:
* Send DEFAULT for the generated columns to the foreign server on insert
or update, not generated column values computed on the local server.
* Add to postgresImportForeignSchema() an option "import_generated" to
include column generated expressions in the definitions of foreign
tables imported from a foreign server. The option is true by default.
The assumption seems reasonable, because that would make a query of the
postgres_fdw foreign table return values for the generated columns that
are consistent with the generated expression.
While here, fix another issue in postgresImportForeignSchema(): it tried
to include column generated expressions as column default expressions in
the foreign table definitions when the import_default option was enabled.
Per bug #16631 from Daniel Cherniy. Back-patch to v12 where generated
columns were added.
Discussion: https://postgr.es/m/16631-e929fe9db0ffc7cf%40postgresql.org
I failed to account for the possibility that when
ExecAppendAsyncEventWait() notifies multiple async-capable nodes using
postgres_fdw, a preceding node might invoke process_pending_request() to
process a pending asynchronous request made by a succeeding node. In
that case the succeeding node should produce a tuple to return to the
parent Append node from tuples fetched by process_pending_request() when
notified. Repair.
Per buildfarm via Michael Paquier. Back-patch to v14, like the previous
commit.
Thanks to Tom Lane for testing.
Discussion: https://postgr.es/m/YQP0UPT8KmPiHTMs%40paquier.xyz
This is simple enough except for the need to check whether CaseTestExpr
nodes have a collation that is not derived from a remote Var. For that,
examine the CASE's "arg" expression and then pass that info down into the
recursive examination of the WHEN expressions.
Alexander Pyhalov, reviewed by Gilles Darold and myself
Discussion: https://postgr.es/m/fda09032e90d85d9b726a41e03f9097f@postgrespro.ru
A pending asynchronous request is handled by process_pending_request(),
which previously not only processed an in-progress remote query but
performed ExecForeignScan() to produce a tuple to return to the local
server asynchronously from the result of the remote query. But that led
to a server crash when executing a query or led to an "InstrStartNode
called twice in a row" or "InstrEndLoop called on running node" failure
when doing EXPLAIN ANALYZE of it, in cases where the plan tree for it
contained multiple async-capable nodes accessing the same
initplan/subplan that contained multiple async-capable nodes scanning
the same foreign tables as for the parent async-capable nodes, as
reported by Andrey Lepikhov. The reason is that the second step in
process_pending_request() invoked when executing the initplan/subplan
for one of the parent async-capable nodes caused recursive execution of
the initplan/subplan for another of the parent async-capable nodes.
To fix, split process_pending_request() into the two steps and postpone
the second step until ForeignAsyncConfigureWait() is called for each of
the pending asynchronous requests. Also, in ExecAppendAsyncEventWait()
we assumed that FDWs would register at least one wait event in a
WaitEventSet created there when they were called from
ForeignAsyncConfigureWait() in that function, but allow FDWs to register
zero wait events in the WaitEventSet; modify ExecAppendAsyncEventWait()
to just return in that case.
Oversight in commit 27e1f1456. Back-patch to v14 where that commit went
in.
Andrey Lepikhov and Etsuro Fujita
Discussion: https://postgr.es/m/fe5eaa19-1704-e4a4-76ee-3b9d37ade399@postgrespro.ru
There is only one constructor now for PostgresNode, with the idiomatic
name 'new'. The method is not exported by the class, and must be called
as "PostgresNode->new('name',[args])". All the TAP tests that use
PostgresNode are modified accordingly. Third party scripts will need
adjusting, which is a fairly mechanical process (I just used a sed
script).
This adjusts the MSVC build scripts to look at the compile flags mentioned
in the Makefile to look for -D arguments in order to determine which
constants should be defined in Visual Studio builds.
One small anomaly that appeared as a result of this change is that the
Makefile for the ltree contrib module defined LOWER_NODE, but this was
not properly defined in the MSVC build scripts. This meant that MSVC
builds would differ in case sensitivity in the ltree module when
compared to builds using a make build environment. To maintain the same
behavior here we remove the -DLOWER_NODE from the Makefile and just always
define it in ltree.h for non-MSVC builds. We need to maintain the old
behavior here as this affects the on-disk compatibility of GiST indexes
when using the ltree type.
The only other resulting change here is that REFINT_VERBOSE is now defined
for the autoinc, insert_username and moddatetime contrib modules.
Previously on MSVC, this was only defined for the refint module. This
aligns the behavior to build environments using make as all 4 of these
modules share the same Makefile.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvpo6g5csCTjc_0C7DMvgFPomVb0Rh-AcW5afd=Ya=LRuw@mail.gmail.com
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
This patch causes EXPLAIN output to refer to objects that are in
the current session's temp schema with the "pg_temp" schema alias
rather than that schema's actual name. This is useful for our own
testing purposes since it will stabilize EXPLAIN VERBOSE output
for such cases, allowing us to use that in regression tests.
It should be less confusing for end users too.
Since ruleutils.c needs to change behavior for this, the change
also leaks into a few other users of ruleutils.c, for example
pg_get_viewdef(). AFAICS that won't cause any problems.
We did find that aggressively trying to change this behavior
across-the-board would cause issues, but as long as "pg_temp"
only appears within generated SQL text, I think it'll be fine.
Along the way, make get_namespace_name_or_temp conform to the
same API as get_namespace_name, ie that it returns a palloc'd
string or NULL. The current behavior hasn't caused any bugs
since no callers attempt to pfree the result, but if it gets
more widespread usage that could become a problem.
Amul Sul, reviewed and extended by me
Discussion: https://postgr.es/m/CAAJ_b97W=QaGmag9AhWNbmx3uEYsNkXWL+OVW1_E1D3BtgWvtw@mail.gmail.com
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
ld_upper, ld_lower, pd_special and the page size have been using
smallint as return type, which could cause those fields to return
negative values in certain cases for builds configures with a page size
of 32kB.
Bump pageinspect to 1.10. page_header() is able to handle the correct
return type of those fields at runtime when using an older version of
the extension, with some tests are added to cover that.
Author: Quan Zongliang
Reviewed-by: Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/8b8ec36e-61fe-14f9-005d-07bc85aa4eed@yeah.net
Most error messages about a relkind that was not supported or
appropriate for the command was of the pattern
"relation \"%s\" is not a table, foreign table, or materialized view"
This style can become verbose and tedious to maintain. Moreover, it's
not very helpful: If I'm trying to create a comment on a TOAST table,
which is not supported, then the information that I could have created
a comment on a materialized view is pointless.
Instead, write the primary error message shorter and saying more
directly that what was attempted is not possible. Then, in the detail
message, explain that the operation is not supported for the relkind
the object was. To simplify that, add a new function
errdetail_relkind_not_supported() that does this.
In passing, make use of RELKIND_HAS_STORAGE() where appropriate,
instead of listing out the relkinds individually.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/dc35a398-37d0-75ce-07ea-1dd71d98f8ec@2ndquadrant.com
In 86dc90056, I'd written find_modifytable_subplan with the assumption
that if the immediate child of a ModifyTable is a Result, it must be
a projecting Result with a subplan. However, if the UPDATE or DELETE
has a provably-constant-false WHERE clause, that's not so: we'll
generate a dummy subplan with a childless Result. Add the missing
null-check so we don't crash on such cases.
Per report from Alexander Pyhalov.
Discussion: https://postgr.es/m/b9a6f53549456b2f3e2fd150dcd79d72@postgrespro.ru
Previously the values such as '100$%$#$#', '9,223,372,' were accepted and
treated as valid integers for postgres_fdw options batch_size and fetch_size.
Whereas this is not the case with fdw_startup_cost and fdw_tuple_cost options
for which an error is thrown. This was because endptr was not used
while converting strings to integers using strtol.
This commit changes the logic so that it uses parse_int function
instead of strtol as it serves the purpose by returning false in case
if it is unable to convert the string to integer. Note that
this function also rounds off the values such as '100.456' to 100 and
'100.567' or '100.678' to 101.
While on this, use parse_real for fdw_startup_cost and fdw_tuple_cost options.
Since parse_int and parse_real are being used for reloptions and GUCs,
it is more appropriate to use in postgres_fdw rather than using strtol
and strtod directly.
Back-patch to v14.
Author: Bharath Rupireddy
Reviewed-by: Ashutosh Bapat, Tom Lane, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVMO6wY5Pc4oe1OCgUOAtdjHuFsBDw8R5uoYR86eWFQDA@mail.gmail.com
As in 50371df26, this is a bad idea since the callback can't really
know what error is being thrown and thus whether or not it is safe
to attempt catalog accesses. Rather than pushing said accesses into
the mainline code where they'd usually be a waste of cycles, we can
look at the query's rangetable instead.
This change does mean that we'll be printing query aliases (if any
were used) rather than the table or column's true name. But that
doesn't seem like a bad thing: it's certainly a more useful definition
in self-join cases, for instance. In any case, it seems unlikely that
any applications would be depending on this detail, so it seems safe
to change.
Patch by me. Original complaint by Andres Freund; Bharath Rupireddy
noted the connection to conversion_error_callback.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
The queries involving ft1_nopw don't stably return the same row
anymore. I surmise that an autovacuum hitting "S 1"."T 1"
right after the updates introduced by f61db909d/5843659d0 freed
some space, changing where subsequent insertions get stored.
It's only by good luck that these results were stable before,
though, since a LIMIT without ORDER BY isn't well defined,
and it's not like we've ever treated that table as append-only
in this test script.
Since we only really care whether these commands succeed or not,
just replace "SELECT *" with "SELECT 1".
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=crake&dt=2021-06-23%2019%3A52%3A08
For no obvious reason, isolationtester has always insisted that
session and step names be written with double quotes. This is
fairly tedious and does little for test readability, especially
since the names that people actually choose almost always look
like normal identifiers. Hence, let's tweak the lexer to allow
SQL-like identifiers not only double-quoted strings.
(They're SQL-like, not exactly SQL, because I didn't add any
case-folding logic. Also there's no provision for U&"..." names,
not that anyone's likely to care.)
There is one incompatibility introduced by this change: if you write
"foo""bar" with no space, that used to be taken as two identifiers,
but now it's just one identifier with an embedded quote mark.
I converted all the src/test/isolation/ specfiles to remove
unnecessary double quotes, but stopped there because my
eyes were glazing over already.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/759113.1623861959@sss.pgh.pa.us
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
Code comments were claiming that verify_heapam() was checking
privileges on the relation it was operating on, but it didn't actually
do that. Perhaps earlier versions of the patch did that, but now the
access is regulated by privileges on the function. Remove the wrong
comments.
Buildfarm members ayu and tern have sometimes shown a different
plan than expected for this query. I'd been unable to reproduce
that before today, but I finally realized what is happening.
If there is a concurrent open transaction (probably an autovacuum
run in the buildfarm, but this can also be arranged manually),
then the index entries for the rows removed by the DELETE a few
lines up are not killed promptly, causing a change in the planner's
estimate of the extremal value of ft2.c1, which moves the rowcount
estimate for "c1 > 1100" by enough to change the join plan from
nestloop to hash.
To fix, change the query condition to "c1 > 1000", causing the
hash plan to be preferred whether or not a concurrent open
transaction exists. Since this UPDATE is tailored to be a no-op,
nothing else changes.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=ayu&dt=2021-06-09%2022%3A45%3A48
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=ayu&dt=2021-06-13%2022%3A38%3A18
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=tern&dt=2021-06-20%2004%3A55%3A36
In the "simple Query" code path, it's fine for parse analysis or
execution of a utility statement to scribble on the statement's node
tree, since that'll just be thrown away afterwards. However it's
not fine if the node tree is in the plan cache, as then it'd be
corrupted for subsequent executions. Up to now we've dealt with
that by having individual utility-statement functions apply
copyObject() if they were going to modify the tree. But that's
prone to errors of omission. Bug #17053 from Charles Samborski
shows that CREATE/ALTER DOMAIN didn't get this memo, and can
crash if executed repeatedly from plan cache.
In the back branches, we'll just apply a narrow band-aid for that,
but in HEAD it seems prudent to have a more principled fix that
will close off the possibility of other similar bugs in future.
Hence, let's hoist the responsibility for doing copyObject up into
ProcessUtility from its children, thus ensuring that it happens for
all utility statement types.
Also, modify ProcessUtility's API so that its callers can tell it
whether a copy step is necessary. It turns out that in all cases,
the immediate caller knows whether the node tree is transient, so
this doesn't involve a huge amount of code thrashing. In this way,
while we lose a little bit in the execute-from-cache code path due
to sometimes copying node trees that wouldn't be mutated anyway,
we gain something in the simple-Query code path by not copying
throwaway node trees. Statements that are complex enough to be
expensive to copy are almost certainly ones that would have to be
copied anyway, so the loss in the cache code path shouldn't be much.
(Note that this whole problem applies only to utility statements.
Optimizable statements don't have the issue because we long ago made
the executor treat Plan trees as read-only. Perhaps someday we will
make utility statement execution act likewise, but I'm not holding
my breath.)
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
Commit b676ac443b optimized handling of tuple slots with bulk inserts
into foreign tables, so that the slots are initialized only once and
reused for all batches. The data was however copied into the slots only
after the initialization, inserting duplicate values when the slot gets
reused. Fixed by moving the ExecCopySlot outside the init branch.
The existing postgres_fdw tests failed to catch this due to inserting
data into foreign tables without unique indexes, and then checking only
the number of inserted rows. This adds a new test with both a unique
index and a check of inserted values.
Reported-by: Alexander Pyhalov
Discussion: https://postgr.es/m/7a8cf8d56b3d18e5c0bccd6cd42d04ac%40postgrespro.ru
The FE/BE protocol identifies parameters with an Int16 index, which
limits the maximum number of parameters per query to 65535. With
batching added to postges_fdw this limit is much easier to hit, as
the whole batch is essentially a single query, making this error much
easier to hit.
The failures are a bit unpredictable, because it also depends on the
number of columns in the query. So instead of just failing, this patch
tweaks the batch_size to not exceed the maximum number of parameters.
Reported-by: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB571603973C0AC2874AD6BF2594299%40OS0PR01MB5716.jpnprd01.prod.outlook.com
If autovacuum comes along just after we fill table test_seg with
some data, it will update the stats to the point where we prefer
a plain indexscan over a bitmap scan, breaking the expected
output (as well as the point of the test case). To fix, just
force a bitmap scan to be chosen here.
This has evidently been wrong since commit de1d042f5. It's not
clear why we just recently saw any buildfarm failures due to it;
but prairiedog has failed twice on this test in the past week.
Hence, backpatch to v11 where this test case came in.
In cases where run-time pruning isn't required, the synchronous and
asynchronous subplans for an async-aware Append node determined using
classify_matching_subplans() should be re-used when rescanning the node,
but the previous code re-determined them using that function repeatedly
each time when rescanning the node, leading to incorrect results in a
normal build and an Assert failure in an Assert-enabled build as that
function doesn't assume that it's called repeatedly in such cases. Fix
the code as mentioned above.
My oversight in commit 27e1f1456.
While at it, initialize async-related pointers/variables to NULL/zero
explicitly in ExecInitAppend() and ExecReScanAppend(), just to be sure.
(The variables would have been set to zero before we get to the latter
function, but let's do so.)
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAPmGK16Q4B2_KY%2BJH7rb7wQbw54AUprp7TMekGTd2T1B62yysQ%40mail.gmail.com
Commit 86dc90056 expects that FDWs can cope with whole-row Vars for
their tables, even if the Vars are marked with vartype RECORDOID.
Previously, whole-row Vars generated by the planner had vartype equal
to the relevant table's rowtype OID. (The point behind this change is
to enable sharing of resjunk columns across inheritance child tables.)
It turns out that postgres_fdw fails to cope with this, though through
bad fortune none of its test cases exposed that. Things mostly work,
but when we try to read back a value of such a Var, the expected
rowtype is not available to record_in(). Fortunately, it's not
difficult to hack up the tupdesc that controls this process to
substitute the foreign table's rowtype for RECORDOID. Thus we can
solve the runtime problem while still sharing the resjunk column
with other tables.
Per report from Alexander Pyhalov.
Discussion: https://postgr.es/m/7817fb9ebd6661cdf9b67dec6e129a78@postgrespro.ru
Commit 428b260f8 broke planning of cases where row marks are needed
(SELECT FOR UPDATE, etc) and one of the query's tables is a foreign
table that has regular table(s) as inheritance children. We got the
reverse case right, but apparently were thinking that foreign tables
couldn't be inheritance parents. Not so; so we need to be able to
add a CTID junk column while adding a new child, not only a wholerow
junk column.
Back-patch to v12 where the faulty code came in.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEmo3FV1LAQ4TVyS2h1WM=kMkZUmbNuZSCnfHvMcUcPeA@mail.gmail.com
While decoding the multi-insert WAL we can't clean the toast untill we get
the last insert of that WAL record. Now if we stream the changes before we
get the last change, the memory for toast chunks won't be released and we
expect the txn to have streamed all changes after streaming. This
restriction is mainly to ensure the correctness of streamed transactions
and it doesn't seem worth uplifting such a restriction just to allow this
case because anyway we will stream the transaction once such an insert is
complete.
Previously we were using two different flags (one for toast tuples and
another for speculative inserts) to indicate partial changes. Now instead
we replaced both of them with a single flag to indicate partial changes.
Reported-by: Pavan Deolasee
Author: Dilip Kumar
Reviewed-by: Pavan Deolasee, Amit Kapila
Discussion: https://postgr.es/m/CABOikdN-_858zojYN-2tNcHiVTw-nhxPwoQS4quExeweQfG1Ug@mail.gmail.com
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
Commits 27e1f1456 and 86dc90056, which were independently discussed,
cause a crash when executing an inherited foreign UPDATE/DELETE query
with asynchronous execution enabled, where children of an Append node
that is the direct/indirect child of the ModifyTable node are rewritten
so as to modify foreign tables directly by postgresPlanDirectModify();
as in that case the direct modifications are executed asynchronously,
which is not currently supported by asynchronous execution. Fix by
disabling asynchronous execution of the direct modifications in that
function.
Author: Etsuro Fujita
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/CAPmGK158e9sJOfuWxfn%2B0ynrspXQU3JhNjSCbaoeSzMvnga%2Bbw%40mail.gmail.com
Some of the tests were not considering that the slot's spill stats could be
received by the stats collector after we have reset the stats. Remove
those tests and don't check total bytes decoded and sent to output plugin
in the spilled stats test as we can send the spilled stats to the stats
collector before actually sending the changes to output plugin.
Reported-by: Tom Lane as per buildfarm
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
EXPLAIN ANALYZE for an async-capable ForeignScan node associated with
postgres_fdw is done just by using instrumentation for ExecProcNode()
called from the node's callbacks, causing the following problems:
1) If the remote table to scan is empty, the node is incorrectly
considered as "never executed" by the command even if the node is
executed, as ExecProcNode() isn't called from the node's callbacks at
all in that case.
2) The command fails to collect timings for things other than
ExecProcNode() done in the node, such as creating a cursor for the
node's remote query.
To fix these problems, add instrumentation for async-capable nodes, and
modify postgres_fdw accordingly.
My oversight in commit 27e1f1456.
While at it, update a comment for the AsyncRequest struct in execnodes.h
and the documentation for the ForeignAsyncRequest API in fdwhandler.sgml
to match the code in ExecAsyncAppendResponse() in nodeAppend.c, and fix
typos in comments in nodeAppend.c.
Per report from Andrey Lepikhov, though I didn't use his patch.
Reviewed-by: Andrey Lepikhov
Discussion: https://postgr.es/m/2eb662bb-105d-fc20-7412-2f027cc3ca72%40postgrespro.ru
When executing the INSERT with batching, we may need to rebuild the
query when the batch size changes, in which case we pfree the current
string. We must not release the original string, stored in fdw_private,
because that may be needed in EXPLAIN ANALYZE. So make copy of the SQL,
but only for INSERT queries.
Reported-by: Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRCL_Rjw-MCR6J7VX9OF7MR6PA5K8qUbrMvprW_e-aHkfQ%40mail.gmail.com
Commit 93f414614 improved a pre-existing test case so that it would
show whether or not termination of the "remote" worker process happened.
This soon exposed that, when debug_invalidate_system_caches_always
(nee CLOBBER_CACHE_ALWAYS) is enabled, no such termination occurs.
That's because cache invalidation forces postgres_fdw connections
to be dropped at end of transaction, so that there's no worker to
terminate. There's a race condition as to whether the worker will
manage to get out of the BackendStatusArray before we look, but at
least on buildfarm member hyrax, it's failed twice in two attempts.
Rather than re-lobotomizing the test, let's fix this by transiently
disabling debug_invalidate_system_caches_always. (Hooray for that
being just a GUC nowadays, rather than a compile-time option.)
If this proves not to be enough to make the test stable, we can
do the other thing instead.
Discussion: https://postgr.es/m/3854538.1620081771@sss.pgh.pa.us
Properly fix:
- the "ONLY" in FROM [ONLY] isn't hashed
- the agglevelsup field in GROUPING isn't hashed
- WITH TIES not being hashed (new in PG 13)
- "DISTINCT" in "GROUP BY [DISTINCT]" isn't hashed (new in PG 14)
Reported-by: Julien Rouhaud
Discussion: https://postgr.es/m/20210425081119.ulyzxqz23ueh3wuj@nol
As per analysis, it appears that the 'drop slot' message from the previous
test and 'create slot' message of the new test are either missed or not
yet delivered to the stats collector due to which we will still see the
stats from the old slot. This can happen rarely which could be the reason
that we are seeing some failures in the buildfarm randomly. To avoid that
we are using a different slot name for the tests in
test_decoding/sql/stats.sql.
Reported-by: Tom Lane based on buildfarm reports
Author: Sawada Masahiko
Reviewed-by: Amit Kapila, Vignesh C
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Commit 8ff1c94649 allowed TRUNCATE command to truncate foreign tables.
Previously the information about "ONLY" options specified in TRUNCATE
command were passed to the foreign data wrapper. Then postgres_fdw
constructed the TRUNCATE command to issue the remote server and
included "ONLY" options in it based on the passed information.
On the other hand, "ONLY" options specified in SELECT, UPDATE or DELETE
have no effect when accessing or modifying the remote table, i.e.,
are not passed to the foreign data wrapper. So it's inconsistent to
make only TRUNCATE command pass the "ONLY" options to the foreign data
wrapper. Therefore this commit changes the TRUNCATE command so that
it doesn't pass the "ONLY" options to the foreign data wrapper,
for the consistency with other statements. Also this commit changes
postgres_fdw so that it always doesn't include "ONLY" options in
the TRUNCATE command that it constructs.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Kyotaro Horiguchi, Justin Pryzby, Zhihong Yu
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
This isn't strictly necessary, but in theory it might matter if in the
future the width of the nbtree special area changes -- its total size
might not be an even number of MAXALIGN() quantums, even with padding.
PageInit() MAXALIGN()s all special area offsets, but amcheck uses the
offset to perform initial basic validation of line pointers, so we don't
rely on the offset from the page header.
The real reason to do this is to set a good example for new code that
adds amcheck coverage for other index AMs.
Reported-By: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACUMqTR9nErh99FbOBmzCXE9=gXNqhBiwYOhejJJS1LXqQ@mail.gmail.com
This is cleanup for commit 27e1f1456:
* ExecAppendAsyncEventWait(), which was modified a bit further by commit
a8af856d3, duplicated the same nevents calculation. Simplify the code
a little bit to avoid the duplication. Update comments there.
* Add an assertion to ExecAppendAsyncRequest().
* Update a comment about merging the async_capable options from input
relations in merge_fdw_options(), per complaint from Kyotaro Horiguchi.
* Add a comment for fetch_more_data_begin().
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK1637W30Wx3MnrReewhafn6F_0J76mrJGoFXFnpPq4QfvA%40mail.gmail.com
In the new test after resetting the stats, we were not waiting for the
stats message to be delivered. Also, we need to decode the results for
the new test, otherwise, it will show the old stats.
In passing,
a. Change docs added by commit f5fc2f5b23 as per suggestion by
Justin Pryzby.
b. Bump the PGSTAT_FILE_FORMAT_ID as commit f5fc2f5b23 changes the file
format of stats.
Reported-by: Tom Lane based on buildfarm reports
Author: Vignesh C, Justin Pryzby
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
A couple of tests have been using 0 as magic constant while SEEK_SET can
be used instead. This makes the code easier to understand, and more
consistent with the changes done in 3c5b068.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YHrc24AgJQ6tQ1q0@paquier.xyz
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
We don't need to mention the attribute number in these messages, because
there's a dedicated column for that, but we should mention the toast
value ID, because that's really useful for any follow-up troubleshooting
the user wants to do. This also rewords some of the messages to hopefully
read a little better.
Also, use VARATT_EXTERNAL_GET_POINTER in case we're accessing a TOAST
pointer that isn't aligned on a platform that's fussy about alignment,
so that we don't crash while corruption-checking the user's data.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/7D3B9BF6-50D0-4C30-8506-1C1851C7F96F@enterprisedb.com
The tests introduced in 32a9c0b for connections broken and
re-established rely on pg_terminate_backend() for their logic. When
these were introduced, this function simply sent a signal to a backend
without waiting for the operation to complete, and the tests repeatedly
looked at pg_stat_activity to check if the operation was completed or
not. Since aaf0432, it is possible to define a timeout to make
pg_terminate_backend() wait for a certain duration, so make use of it,
with a timeout reasonably large enough (3min) to give enough room for
the tests to pass even on slow machines.
Some measurements show that the tests of postgres_fdw are much faster
with this change. For example, on my laptop, they now take 4s instead
of 6s.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXGY_EfGrMTjKjHy2zi-u1u9rdeioU_fro0T6Jo8t56KQ@mail.gmail.com
Ignore parallel workers in pg_stat_statements
Oversight in 4f0b0966c8 which exposed queryid in parallel workers.
Counters are aggregated by the main backend process so parallel workers
would report duplicated activity, and could also report activity for the
wrong entry as they are only aware of the top level queryid.
Fix thinko in pg_stat_get_activity when retrieving the queryid.
Remove unnecessary call to pgstat_report_queryid().
Reported-by: Amit Kapila, Andres Freund, Thomas Munro
Discussion: https://postgr.es/m/20210408051735.lfbdzun5zdlax5gd@alap3.anarazel.dep634GTSOqnDW86Owrn6qDAVosC5dJjXjp7BMfc5Gz1Q@mail.gmail.com
Author: Julien Rouhaud
This commit introduces new foreign data wrapper API for TRUNCATE.
It extends TRUNCATE command so that it accepts foreign tables as
the targets to truncate and invokes that API. Also it extends postgres_fdw
so that it can issue TRUNCATE command to foreign servers, by adding
new routine for that TRUNCATE API.
The information about options specified in TRUNCATE command, e.g.,
ONLY, CACADE, etc is passed to FDW via API. The list of foreign tables to
truncate is also passed to FDW. FDW truncates the foreign data sources
that the passed foreign tables specify, based on those information.
For example, postgres_fdw constructs TRUNCATE command using them
and issues it to the foreign server.
For performance, TRUNCATE command invokes the FDW routine for
TRUNCATE once per foreign server that foreign tables to truncate belong to.
Author: Kazutaka Onishi, Kohei KaiGai, slightly modified by Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier, Zhihong Yu, Alvaro Herrera, Stephen Frost, Ashutosh Bapat, Amit Langote, Daniel Gustafsson, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/CAOP8fzb_gkReLput7OvOK+8NHgw-RKqNv59vem7=524krQTcWA@mail.gmail.com
Discussion: https://postgr.es/m/CAJuF6cMWDDqU-vn_knZgma+2GMaout68YUgn1uyDnexRhqqM5Q@mail.gmail.com
Changing pg_stat_statements.track between 'all' and 'top' would control
if pg_stat_statements tracked just top level statements or also
statements inside functions, but when tracking all it would not
differentiate between the two. Being table to differentiate this is
useful both to track where the actual query is coming from, and to see
if there are differences in executions between the two.
To do this, add a boolean to the hash key indicating if the statement
was top level or not.
Experience from the pg_stat_kcache module shows that in at least some
"reasonable worloads" only <5% of the queries show up both top level and
nested. Based on this, admittedly small, dataset, this patch does not
try to de-duplicate those query *texts*, and will just store one copy
for the top level and one for the nested.
Author: Julien Rohaud
Reviewed-By: Magnus Hagander, Masahiro Ikeda
Discussion: https://postgr.es/m/20201202040516.GA43757@nol
Use the in-core query id computation for pg_stat_activity,
log_line_prefix, and EXPLAIN VERBOSE.
Similar to other fields in pg_stat_activity, only the queryid from the
top level statements are exposed, and if the backends status isn't
active then the queryid from the last executed statements is displayed.
Add a %Q placeholder to include the queryid in log_line_prefix, which
will also only expose top level statements.
For EXPLAIN VERBOSE, if a query identifier has been computed, either by
enabling compute_query_id or using a third-party module, display it.
Bump catalog version.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
First, don't perform database access while holding a buffer lock.
When checking a heap, we can validate that TOAST pointers are sane by
performing a scan on the TOAST index and looking up the chunks that
correspond to each value ID that appears in a TOAST poiner in the main
table. But, to do that while holding a buffer lock at least risks
causing other backends to wait uninterruptibly, and probably can cause
undetected and uninterruptible deadlocks. So, instead, make a list of
checks to perform while holding the lock, and then perform the checks
after releasing it.
Second, adjust things so that we don't try to follow TOAST pointers
for tuples that are already eligible to be pruned. The TOAST tuples
become eligible for pruning at the same time that the main tuple does,
so trying to check them may lead to spurious reports of corruption,
as observed in the buildfarm. The necessary infrastructure to decide
whether or not the tuple being checked is prunable was added by
commit 3b6c1259f9, but it wasn't
actually used for its intended purpose prior to this patch.
Mark Dilger, adjusted by me to avoid a memory leak.
Discussion: http://postgr.es/m/AC5479E4-6321-473D-AC92-5EC36299FBC2@enterprisedb.com
Add compute_query_id GUC to control whether a query identifier should be
computed by the core (off by default). It's thefore now possible to
disable core queryid computation and use pg_stat_statements with a
different algorithm to compute the query identifier by using a
third-party module.
To ensure that a single source of query identifier can be used and is
well defined, modules that calculate a query identifier should throw an
error if compute_query_id specified to compute a query id and if a query
idenfitier was already calculated.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
Commit 3b6c1259f9 resulted in the same
xmin and xmax bounds checking being performed in both check_tuple()
and check_tuple_visibility(). Remove the duplication.
While at it, adjust some code comments that were overlooked in that
commit.
Mark Dilger
Discussion: http://postgr.es/m/AC5479E4-6321-473D-AC92-5EC36299FBC2@enterprisedb.com
By default, have libpq set the TLS extension "Server Name Indication" (SNI).
This allows an SNI-aware SSL proxy to route connections. (This
requires a proxy that is aware of the PostgreSQL protocol, not just
any SSL proxy.)
In the future, this could also allow the server to use different SSL
certificates for different host specifications. (That would require
new server functionality. This would be the client-side functionality
for that.)
Since SNI makes the host name appear in cleartext in the network
traffic, this might be undesirable in some cases. Therefore, also add
a libpq connection option "sslsni" to turn it off.
Discussion: https://www.postgresql.org/message-id/flat/7289d5eb-62a5-a732-c3b9-438cee2cb709%40enterprisedb.com
This reverts commit 9f984ba6d2.
It was making the buildfarm unhappy, apparently setting client_min_messages
in a regression test produces different output if log_statement='all'.
Another issue is that I now suspect the bit sortsupport function was in
fact not correct to call byteacmp(). Revert to investigate both of those
issues.
Bloom, GIN, GiST and SP-GiST rely on PageInit() to initialize the
contents of a page, and this routine fills entirely a page with zeros
for a size of BLCKSZ, including the special space. Those index AMs have
been using an extra memset() call to fill with zeros the special page
space, or even the whole page, which is not necessary as PageInit()
already does this work, so let's remove them. GiST was not doing this
extra call, but has commented out a system call that did so since
6236991.
While on it, remove one MAXALIGN() for SP-GiST as PageInit() takes care
of that. This makes the whole page initialization logic more consistent
across all index AMs.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Mahendra Singh Thalor
Discussion: https://postgr.es/m/CALj2ACViOo2qyaPT7krWm4LRyRTw9kOXt+g6PfNmYuGA=YHj9A@mail.gmail.com
Commit f49bcd4ef3 disallowed postgres_fdw to import table partitions.
Because all data can be accessed through the partitioned table which
is the root of the partitioning hierarchy, importing only partitioned
table should allow access to all the data without creating extra objects.
This is a reasonable default when importing a whole schema. But there
may be the case where users want to explicitly import one of
a partitioned tables' partitions.
For that use case, this commit allows postgres_fdw to import tables or
foreign tables which are partitions of some other table only when they
are explicitly specified in LIMIT TO clause. It doesn't change
the behavior that any partitions not specified in LIMIT TO are
automatically excluded in IMPORT FOREIGN SCHEMA command.
Author: Matthias van de Meent
Reviewed-by: Bernd Helmle, Amit Langote, Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/CAEze2Whwg4i=mzApMe+PXxCEfgoZmHGqdqQFW7J4bmj_5p6t1A@mail.gmail.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
This commit adds a new option keep_connections that controls
whether postgres_fdw keeps the connections to the foreign server open
so that the subsequent queries can re-use them. This option can only be
specified for a foreign server. The default is on. If set to off,
all connections to the foreign server will be discarded
at the end of transaction. Closed connections will be re-established
when they are necessary by future queries using a foreign table.
This option is useful, for example, when users want to prevent
the connections from eating up the foreign servers connections
capacity.
Author: Bharath Rupireddy
Reviewed-by: Alexey Kondratov, Vignesh C, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVvrp5=AVp2PupEm+nAC8S4buqR3fJMmaCoc7ftT0aD2A@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu, Hou Zhijie
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
This removes "Add Result Cache executor node". It seems that something
weird is going on with the tracking of cache hits and misses as
highlighted by many buildfarm animals. It's not yet clear what the
problem is as other parts of the plan indicate that the cache did work
correctly, it's just the hits and misses that were being reported as 0.
This is especially a bad time to have the buildfarm so broken, so
reverting before too many more animals go red.
Discussion: https://postgr.es/m/CAApHDvq_hydhfovm4=izgWs+C5HqEeRScjMbOgbpC-jRAeK3Yw@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
This patch makes two closely related sets of changes:
1. For UPDATE, the subplan of the ModifyTable node now only delivers
the new values of the changed columns (i.e., the expressions computed
in the query's SET clause) plus row identity information such as CTID.
ModifyTable must re-fetch the original tuple to merge in the old
values of any unchanged columns. The core advantage of this is that
the changed columns are uniform across all tables of an inherited or
partitioned target relation, whereas the other columns might not be.
A secondary advantage, when the UPDATE involves joins, is that less
data needs to pass through the plan tree. The disadvantage of course
is an extra fetch of each tuple to be updated. However, that seems to
be very nearly free in context; even worst-case tests don't show it to
add more than a couple percent to the total query cost. At some point
it might be interesting to combine the re-fetch with the tuple access
that ModifyTable must do anyway to mark the old tuple dead; but that
would require a good deal of refactoring and it seems it wouldn't buy
all that much, so this patch doesn't attempt it.
2. For inherited UPDATE/DELETE, instead of generating a separate
subplan for each target relation, we now generate a single subplan
that is just exactly like a SELECT's plan, then stick ModifyTable
on top of that. To let ModifyTable know which target relation a
given incoming row refers to, a tableoid junk column is added to
the row identity information. This gets rid of the horrid hack
that was inheritance_planner(), eliminating O(N^2) planning cost
and memory consumption in cases where there were many unprunable
target relations.
Point 2 of course requires point 1, so that there is a uniform
definition of the non-junk columns to be returned by the subplan.
We can't insist on uniform definition of the row identity junk
columns however, if we want to keep the ability to have both
plain and foreign tables in a partitioning hierarchy. Since
it wouldn't scale very far to have every child table have its
own row identity column, this patch includes provisions to merge
similar row identity columns into one column of the subplan result.
In particular, we can merge the whole-row Vars typically used as
row identity by FDWs into one column by pretending they are type
RECORD. (It's still okay for the actual composite Datums to be
labeled with the table's rowtype OID, though.)
There is more that can be done to file down residual inefficiencies
in this patch, but it seems to be committable now.
FDW authors should note several API changes:
* The argument list for AddForeignUpdateTargets() has changed, and so
has the method it must use for adding junk columns to the query. Call
add_row_identity_var() instead of manipulating the parse tree directly.
You might want to reconsider exactly what you're adding, too.
* PlanDirectModify() must now work a little harder to find the
ForeignScan plan node; if the foreign table is part of a partitioning
hierarchy then the ForeignScan might not be the direct child of
ModifyTable. See postgres_fdw for sample code.
* To check whether a relation is a target relation, it's no
longer sufficient to compare its relid to root->parse->resultRelation.
Instead, check it against all_result_relids or leaf_result_relids,
as appropriate.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
Here we add a new output parameter to estimate_num_groups() to allow it to
inform the caller of additional, possibly useful information about the
estimation.
The new output parameter is a struct that currently contains just a single
field with a set of flags. This was done rather than having the flags as
an output parameter to allow future fields to be added without having to
change the signature of the function at a later date when we want to pass
back further information that might not be suitable to store in the flags
field.
It seems reasonable that one day in the future that the planner would want
to know more about the estimation. For example, how many individual sets
of statistics was the estimation generated from? The planner may want to
take that into account if we ever want to consider risks as well as costs
when generating plans.
For now, there's only 1 flag we set in the flags field. This is to
indicate if the estimation fell back on using the hard-coded constants in
any part of the estimation. Callers may like to change their behavior if
this is set, and this gives them the ability to do so. Callers may pass
the flag pointer as NULL if they have no interest in obtaining any
additional information about the estimate.
We're not adding any actual usages of these flags here. Some follow-up
commits will make use of this feature. Additionally, we're also not
making any changes to add support for clauselist_selectivity() and
clauselist_selectivity_ext(). However, if this is required in the future
then the same struct being added here should be fine to use as a new
output argument for those functions too.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqQqpk=1W-G_ds7A9CsXX3BggWj_7okinzkLVhDubQzjA@mail.gmail.com
Along with gid, this provides a different way to identify the transaction.
The users that use xid in some way to prepare the transactions can use it
to filter prepare transactions. The later commands COMMIT PREPARED or
ROLLBACK PREPARED carries both identifiers, providing an output plugin the
choice of what to use.
Author: Markus Wanner
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/ee280000-7355-c4dc-e47b-2436e7be959c@enterprisedb.com
This has previously not been a problem (that anyone ever reported),
but in future OpenSSL versions (3.0.0), where legacy ciphers are/can
be disabled, this is the place where this is reported. So we need to
catch the error here, otherwise the higher-level functions would
return garbage. The nearby encryption code already handled errors
similarly.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/9e9c431c-0adc-7a6d-9b1a-915de1ba3fe7@enterprisedb.com
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
When accessing replication slot stats, introduced in 9868167500,
pgstat_read_statsfiles() reads the data into newly allocated
memory. Unfortunately the current memory context at that point is the
callers, leading to leaks and use-after-free dangers.
The fix is trivial, explicitly use pgStatLocalContext. There's some
potential for further improvements, but that's outside of the scope of
this bugfix.
No backpatch necessary, feature is only in HEAD.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210317230447.c7uc4g3vbs4wi32i@alap3.anarazel.de
Empty sibling pages can occasionally be much more common than any other
event that we report on at elevel DEBUG1. Increase the elevel for
relevant cases to DEBUG2 to avoid overwhelming the user with relatively
insignificant details.
Don't complain about the last TOAST chunk number being different
from what we expected if there are no TOAST chunks at all.
In such a case, saying that the final chunk number is 0 is not
really accurate, and the fact the value is missing from the
TOAST table is reported separately anyway.
Mark Dilger
Discussion: http://postgr.es/m/AA5506CE-7D2A-42E4-A51D-358635E3722D@enterprisedb.com
This partially reverts 096bbf7 and 9d2d457, undoing the libpq changes as
it could cause breakages in distributions that share one single libpq
version across multiple major versions of Postgres for extensions and
applications linking to that.
Note that the backend is unchanged here, and it still disables SSL
compression while simplifying the underlying catalogs that tracked if
compression was enabled or not for a SSL connection.
Per discussion with Tom Lane and Daniel Gustafsson.
Discussion: https://postgr.es/m/YEbq15JKJwIX+S6m@paquier.xyz
Per buildfarm member crake, any servers including a postgres_fdw server
with this option set would fail to do a pg_upgrade properly as the
option got hidden in f9264d1 by becoming a debug option, making the
restore of the FDW server fail.
This changes back the option in libpq to be visible, but still inactive
to fix this upgrade issue.
Discussion: https://postgr.es/m/YEbq15JKJwIX+S6m@paquier.xyz
PostgreSQL disabled compression as of e3bdb2d and the documentation
recommends against using it since. Additionally, SSL compression has
been disabled in OpenSSL since version 1.1.0, and was disabled in many
distributions long before that. The most recent TLS version, TLSv1.3,
disallows compression at the protocol level.
This commit removes the feature itself, removing support for the libpq
parameter sslcompression (parameter still listed for compatibility
reasons with existing connection strings, just ignored), and removes
the equivalent field in pg_stat_ssl and de facto PgBackendSSLStatus.
Note that, on top of removing the ability to activate compression by
configuration, compression is actively disabled in both frontend and
backend to avoid overrides from local configurations.
A TAP test is added for deprecated SSL parameters to check after
backwards compatibility.
Bump catalog version.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/7E384D48-11C5-441B-9EC3-F7DB1F8518F6@yesql.se
Since PG 8.2, @ and ~ have been deprecated aliases for the containment
operators @> and <@. It seems like enough time has passed to actually
remove them, so do so.
This completes the project begun in commit 2f70fdb06. Note that in
the core types, the relation to the preferred operator names was
reversed from what it is in these contrib modules. The confusion
that induced was a large part of the reason for deprecation.
Justin Pryzby
Discussion: https://postgr.es/m/20201027032511.GF9241@telsasoft.com
Commit 0aa8a01d04 extends the output plugin API to allow decoding of
prepared xacts and allowed the user to enable/disable the two-phase option
via pg_logical_slot_get_changes(). This can lead to a problem such that
the first time when it gets changes via pg_logical_slot_get_changes()
without two_phase option enabled it will not get the prepared even though
prepare is after consistent snapshot. Now next time during getting changes,
if the two_phase option is enabled it can skip prepare because by that
time start decoding point has been moved. So the user will only get commit
prepared.
Allow to enable/disable this option at the create slot time and default
will be false. It will break the existing slots which is fine in a major
release.
Author: Ajin Cherian
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
In commit a271a1b50e, we allowed decoding at prepare time and the prepare
was decoded again if there is a restart after decoding it. It was done
that way because we can't distinguish between the cases where we have not
decoded the prepare because it was prior to consistent snapshot or we have
decoded it earlier but restarted. To distinguish between these two cases,
we have introduced an initial_consistent_point at the slot level which is
an LSN at which we found a consistent point at the time of slot creation.
This is also the point where we have exported a snapshot for the initial
copy. So, prepare transaction prior to this point are sent along with
commit prepared.
This commit bumps SNAPBUILD_VERSION because of change in SnapBuild. It
will break existing slots which is fine in a major release.
Author: Ajin Cherian, based on idea by Andres Freund
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
Commit 866e24d47d added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
Brown-paper-bag bug in 08c0d6ad6: I missed one place that needed
to guard against RAINBOW arc colors. Remarkably, nothing noticed
the invalid array access except buildfarm member thorntail.
Thanks to Noah Misch for assistance with tracking this down.
Some regular expression constructs, most notably the "." match-anything
metacharacter, produce a sheaf of parallel NFA arcs covering all
possible colors (that is, character equivalence classes). We can make
a noticeable improvement in the space and time needed to process large
regexes by replacing such cases with a single arc bearing the special
color code "RAINBOW". This requires only minor additional complication
in places such as pull() and push().
Callers of pg_reg_getoutarcs() must now be prepared for the possibility
of seeing a RAINBOW arc. For the one known user, contrib/pg_trgm,
that's a net benefit since it cuts the number of arcs to be dealt with,
and the handling isn't any different than for other colors that contain
too many characters to be dealt with individually.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
Add another method to specify CRLs, hashed directory method, for both
server and client side. This offers a means for server or libpq to
load only CRLs that are required to verify a certificate. The CRL
directory is specifed by separate GUC variables or connection options
ssl_crl_dir and sslcrldir, alongside the existing ssl_crl_file and
sslcrl, so both methods can be used at the same time.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/20200731.173911.904649928639357911.horikyota.ntt@gmail.com
A cross-partition update on a partitioned table is implemented as a
delete followed by an insert. With foreign partitions, this was however
causing issues, because the FDW and core may disagree on when to enable
batching. postgres_fdw was only allowing batching for plain inserts
(CMD_INSERT) while core was trying to batch the insert component of the
cross-partition update. Fix by restricting core to apply batching only
to plain CMD_INSERT queries.
It's possible to allow batching for cross-partition updates, but that
will require more extensive changes, so better to leave that for a
separate patch.
Author: Amit Langote
Reviewed-by: Tomas Vondra, Takayuki Tsunakawa
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
GistPageSetDeleted() sets pd_lower when deleting a page, and sets the
page contents to a GISTDeletedPageContents. Avoid treating deleted GiST
pages as regular slotted pages within pageinspect.
Oversight in commit 756ab291.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
With its current design, a careless use of pg_cryptohash_final() could
would result in an out-of-bound write in memory as the size of the
destination buffer to store the result digest is not known to the
cryptohash internals, without the caller knowing about that. This
commit adds a new argument to pg_cryptohash_final() to allow such sanity
checks, and implements such defenses.
The internals of SCRAM for HMAC could be tightened a bit more, but as
everything is based on SCRAM_KEY_LEN with uses particular to this code
there is no need to complicate its interface more than necessary, and
this comes back to the refactoring of HMAC in core. Except that, this
minimizes the uses of the existing DIGEST_LENGTH variables, relying
instead on sizeof() for the result sizes. In ossp-uuid, this also makes
the code more defensive, as it already relied on dce_uuid_t being at
least the size of a MD5 digest.
This is in philosophy similar to cfc40d3 for base64.c and aef8948 for
hex.c.
Reported-by: Ranier Vilela
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAEudQAoqEGmcff3J4sTSV-R_16Monuz-UpJFbf_dnVH=APr02Q@mail.gmail.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
If a cross-partition UPDATE violates a constraint on the target partition,
and the columns in the new partition are in different physical order than
in the parent, the error message can reveal columns that the user does not
have SELECT permission on. A similar bug was fixed earlier in commit
804b6b6db4.
The cause of the bug is that the callers of the
ExecBuildSlotValueDescription() function got confused when constructing
the list of modified columns. If the tuple was routed from a parent, we
converted the tuple to the parent's format, but the list of modified
columns was grabbed directly from the child's RTE entry.
ExecUpdateLockMode() had a similar issue. That lead to confusion on which
columns are key columns, leading to wrong tuple lock being taken on tables
referenced by foreign keys, when a row is updated with INSERT ON CONFLICT
UPDATE. A new isolation test is added for that corner case.
With this patch, the ri_RangeTableIndex field is no longer set for
partitions that don't have an entry in the range table. Previously, it was
set to the RTE entry of the parent relation, but that was confusing.
NOTE: This modifies the ResultRelInfo struct, replacing the
ri_PartitionRoot field with ri_RootResultRelInfo. That's a bit risky to
backpatch, because it breaks any extensions accessing the field. The
change that ri_RangeTableIndex is not set for partitions could potentially
break extensions, too. The ResultRelInfos are visible to FDWs at least,
and this patch required small changes to postgres_fdw. Nevertheless, this
seem like the least bad option. I don't think these fields widely used in
extensions; I don't think there are FDWs out there that uses the FDW
"direct update" API, other than postgres_fdw. If there is, you will get a
compilation error, so hopefully it is caught quickly.
Backpatch to 11, where support for both cross-partition UPDATEs, and unique
indexes on partitioned tables, were added.
Reviewed-by: Amit Langote
Security: CVE-2021-3393
Commit 08d2d58a2 added an assertion assuming that the retrieved_rows
estimate for a foreign relation, which is re-used to cost pre-sorted
foreign paths with local stats, is set to at least one row in
estimate_path_cost_size(), which isn't correct because if the relation
is a foreign table with tuples=0, the estimate would be set to 0 there
when not using remote estimates.
Per bug #16807 from Alexander Lakhin. Back-patch to v13 where the
aforementioned commit went in.
Author: Etsuro Fujita
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/16807-9fe4e08fbaa5c7ce%40postgresql.org
The ExecutorEnd hook is invoked in a context that could be quite
long-lived, not the executor's own per-query context as I think
we were sort of assuming. Thus, any cruft generated while producing
the EXPLAIN output could accumulate over multiple queries. This can
result in spectacular leakage if log_nested_statements is on, and
even without that I'm surprised nobody complained before.
To fix, just switch into the executor's context so that anything we
allocate will be released when standard_ExecutorEnd frees the executor
state. We might as well nuke the code's retail pfree of the explain
output string, too; that's laughably inadequate to the need.
Japin Li, per report from Jeff Janes. This bug is old, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMkU=1wCVtbeRn0s9gt12KwQ7PLXovbpM8eg25SYocKW3BT4hg@mail.gmail.com
This is a replacement for the existing --with-openssl, extending the
logic to make easier the addition of new SSL libraries. The grammar is
chosen to be similar to --with-uuid, where multiple values can be
chosen, with "openssl" as the only supported value for now.
The original switch, --with-openssl, is kept for compatibility.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/FAB21FC8-0F62-434F-AA78-6BD9336D630A@yesql.se
The regression tests added in commits 708d165ddb and 411ae64997 caused
buildfarm failures when CLOBBER_CACHE_ALWAYS was enabled.
This commit stabilizes those tests.
The foreign server connections established by postgres_fdw behaves
differently depending on whether CLOBBER_CACHE_ALWAYS is enabled or not.
If it's not enabled, those connections are cached. On the other hand,
if it's enabled, when the connections are established outside transaction
block, they are not cached (i.e., they are immediately closed at the end of
query that established them). So the subsequent postgres_fdw_get_connections()
cannot list those connections and postgres_fdw_disconnect() cannot close them
(because they are already closed).
When the connections are established inside transaction block, they are
cached whether CLOBBER_CACHE_ALWAYS was enabled or not. But if it's enabled,
they are immediately marked as invalid, otherwise not. This causes the
subsequent postgres_fdw_get_connections() to return different result in
"valid" column depending on whether CLOBBER_CACHE_ALWAYS was enabled or not.
This commit prevents the above differences of behavior from
affecting the regression tests.
Per buildfarm failure on trilobite.
Original patch by Bharath Rupireddy. I (Fujii Masao) extracted
the regression test fix from that and revised it a bit.
Reported-by: Tom Lane
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/2688508.1611865371@sss.pgh.pa.us
pg_standby was useful more than a decade ago, but now it is obsolete.
It has been proposed that we retire it many times. Now seems like a
good time to finally do it, because "waiting restore commands"
are incompatible with a proposed recovery prefetching feature.
Discussion: https://postgr.es/m/20201029024412.GP5380%40telsasoft.com
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
CREATE TABLE AS has been preferred over SELECT INTO (outside of ecpg
and PL/pgSQL) for a long time. There were still a few uses of SELECT
INTO in tests and documentation, some old, some more recent. This
changes them to CREATE TABLE AS. Some occurrences in the tests remain
where they are specifically testing SELECT INTO parsing or similar.
Discussion: https://www.postgresql.org/message-id/flat/96dc0df3-e13a-a85d-d045-d6e2c85218da%40enterprisedb.com
Other code paths are already protected against this case, and _PG_init()
warns about that in pg_stat_statements.c. While on it, I have checked
the other extensions of the tree but did not notice any holes.
Oversight in 9fbc3f3.
Author: Jaime Casanova
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAJKUy5gF4=_=qhJ1VX_tSGFfjKHb9BvzhRYWSApJD=Bfwp2SBw@mail.gmail.com
The regression test added in commit 411ae64997 caused buildfarm failures.
The cause of them was that the order of warning messages output in the test
was not stable. To fix this, this commit sets client_min_messages to ERROR
temporarily when performing the test generating those warnings.
Per buildfarm failures.
Discussion: https://postgr.es/m/2147113.1611644754@sss.pgh.pa.us
This commit introduces two new functions postgres_fdw_disconnect()
and postgres_fdw_disconnect_all(). The former function discards
the cached connections to the specified foreign server. The latter discards
all the cached connections. If the connection is used in the current
transaction, it's not closed and a warning message is emitted.
For example, these functions are useful when users want to explicitly
close the foreign server connections that are no longer necessary and
then to prevent them from eating up the foreign servers connections
capacity.
Author: Bharath Rupireddy, tweaked a bit by Fujii Masao
Reviewed-by: Alexey Kondratov, Zhijie Hou, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVvrp5=AVp2PupEm+nAC8S4buqR3fJMmaCoc7ftT0aD2A@mail.gmail.com
With this commit, SHA1 goes through the implementation provided by
OpenSSL via EVP when building the backend with it, and uses as fallback
implementation KAME which was located in pgcrypto and already shaped for
an integration with a set of init, update and final routines.
Structures and routines have been renamed to make things consistent with
the fallback implementations of MD5 and SHA2.
uuid-ossp has used for ages a shortcut with pgcrypto to fetch a copy of
SHA1 if needed. This was built depending on the build options within
./configure, so this cleans up some code and removes the build
dependency between pgcrypto and uuid-ossp.
Note that this will help with the refactoring of HMAC, as pgcrypto
offers the option to use MD5, SHA1 or SHA2, so only the second option
was missing to make that possible.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/X9HXKTgrvJvYO7Oh@paquier.xyz
libpq's error messages for connection failures pretty well stand on
their own, especially since commits 52a10224e/27a48e5a1. Prefixing
them with 'could not connect to database "foo"' or the like is just
redundant, and perhaps even misleading if the specific database name
isn't relevant to the failure. (When it is, we trust that the
backend's error message will include the DB name.) Indeed, psql
hasn't used any such prefix in a long time. So, make all our other
programs and documentation examples agree with psql's practice.
Discussion: https://postgr.es/m/1094524.1611266589@sss.pgh.pa.us
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
Extends the FDW API to allow batching inserts into foreign tables. That
is usually much more efficient than inserting individual rows, due to
high latency for each round-trip to the foreign server.
It was possible to implement something similar in the regular FDW API,
but it was inconvenient and there were issues with reporting the number
of actually inserted rows etc. This extends the FDW API with two new
functions:
* GetForeignModifyBatchSize - allows the FDW picking optimal batch size
* ExecForeignBatchInsert - inserts a batch of rows at once
Currently, only INSERT queries support batching. Support for DELETE and
UPDATE may be added in the future.
This also implements batching for postgres_fdw. The batch size may be
specified using "batch_size" option both at the server and table level.
The initial patch version was written by me, but it was rewritten and
improved in many ways by Takayuki Tsunakawa.
Author: Takayuki Tsunakawa
Reviewed-by: Tomas Vondra, Amit Langote
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
By default VACUUM will skip pages that it can't immediately get
exclusive access to, which means that even activities as harmless
and unpredictable as checkpoint buffer writes might prevent a page
from being processed. Ordinarily this is no big deal, but we have
a small number of test cases that examine the results of VACUUM's
processing and therefore will fail if the page of interest is skipped.
This seems to be the explanation for some rare buildfarm failures.
To fix, add the DISABLE_PAGE_SKIPPING option to the VACUUM commands
in tests where this could be an issue.
In passing, remove a duplicated query in pageinspect/sql/page.sql.
Back-patch as necessary (some of these cases are as old as v10).
Discussion: https://postgr.es/m/413923.1611006484@sss.pgh.pa.us
Block numbers are 32-bit unsigned integers. Therefore, the smallest
SQL integer type that they can fit in is bigint. However, in the
pageinspect module, most input and output parameters dealing with
block numbers were declared as int. The behavior with block numbers
larger than a signed 32-bit integer was therefore dubious. Change
these arguments to type bigint and add some more explicit error
checking on the block range.
(Other contrib modules appear to do this correctly already.)
Since we are changing argument types of existing functions, in order
to not misbehave if the binary is updated before the extension is
updated, we need to create new C symbols for the entry points, similar
to how it's done in other extensions as well.
Reported-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
Per Coverity. BuildIndexValueDescription() cannot actually return NULL in
this instance, because it only returns NULL if the user doesn't have the
required privileges, and this function can only be used by superuser. But
better safe than sorry.
This commit adds function postgres_fdw_get_connections() to return
the foreign server names of all the open connections that postgres_fdw
established from the local session to the foreign servers. This function
also returns whether each connection is valid or not.
This function is useful when checking all the open foreign server connections.
If we found some connection to drop, from the result of function, probably
we can explicitly close them by the function that upcoming commit will add.
This commit bumps the version of postgres_fdw to 1.1 since it adds
new function.
Author: Bharath Rupireddy, tweaked by Fujii Masao
Reviewed-by: Zhijie Hou, Alexey Kondratov, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/2d5cb0b3-a6e8-9bbb-953f-879f47128faa@oss.nttdata.com
The gist_page_items() function opened the index relation on first call and
closed it on the last call. But there's no guarantee that the function is
run to completion, leading to a relcache leak and warning at the end of
the transaction. To fix, refactor the function to return all the rows in
one call, as a tuplestore.
Reported-by: Tom Lane
Discussion: https://www.postgresql.org/message-id/234863.1610916631%40sss.pgh.pa.us
Make sure COPY FREEZE marks the pages as PD_ALL_VISIBLE and updates the
visibility map. Until now we only marked individual tuples as frozen,
but page-level flags were not updated, so the first VACUUM after the
COPY FREEZE had to rewrite the whole table.
This is a fairly old patch, and multiple people worked on it. The first
version was written by Jeff Janes, and then reworked by Pavan Deolasee
and Anastasia Lubennikova.
Author: Anastasia Lubennikova, Pavan Deolasee, Jeff Janes
Reviewed-by: Kuntal Ghosh, Jeff Janes, Tomas Vondra, Masahiko Sawada,
Andres Freund, Ibrar Ahmed, Robert Haas, Tatsuro Ishii,
Darafei Praliaskouski
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Discussion: https://postgr.es/m/CAMkU%3D1w3osJJ2FneELhhNRLxfZitDgp9FPHee08NT2FQFmz_pQ%40mail.gmail.com
The foreign server OID stored in the connection cache entry is used as
a lookup key to directly get the server name.
Previously since the connection cache entry did not have the server OID,
postgres_fdw had to get the server OID at first from user mapping before
getting the server name. So if the corresponding user mapping was dropped,
postgres_fdw could raise the error "cache lookup failed for user mapping"
while looking up user mapping and fail to get the server name even though
the server had not been dropped yet.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVRZPUB7ZwqLn-6DY8C_UmPs6084gSpHA92YBv++1AJXA@mail.gmail.com
The newly-added gist pageinspect test prints the LSNs of GiST pages,
expecting them all to be 1 (GistBuildLSN). But with wal_level=minimal,
they got updated by the whole-relation WAL-logging at commit. Fix by
wrapping the problematic tests in the same transaction with the CREATE
INDEX.
Per buildfarm failure on thorntail.
Discussion: https://www.postgresql.org/message-id/3B4F97E5-40FB-4142-8CAA-B301CDFBF982%40iki.fi
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
1. The raw bytea representation of the point-type keys used in the test
depends on endianess. Remove the raw key_data column from the test.
2. The items stored on non-leftmost gist page depends on how many items
git on the other pages. This showed up as a failure on 32-bit i386
systems. To fix, only test the gist_page_items() function on the
leftmost leaf page.
Per Andrey Borodin and the buildfarm.
Discussion: https://www.postgresql.org/message-id/9FCEC1DC-86FB-4A57-88EF-DD13663B36AF%40yandex-team.ru
Commit 5a3574d7b3 added the test for decoding of two-phase transactions
during the build of a consistent snapshot. The test forgot to skip empty
xacts which can lead to decoding of extra empty transactions due to
background activity by autovacuum.
Per report by buildfarm.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/363512.1610171267@sss.pgh.pa.us
This commit addresses two issues:
- In pgcrypto, MD5 computation called pg_cryptohash_{init,update,final}
without checking for the result status.
- Simplify pg_checksum_raw_context to use only one variable for all the
SHA2 options available in checksum manifests.
Reported-by: Heikki Linnakangas
Discussion: https://postgr.es/m/f62f26bb-47a5-8411-46e5-4350823e06a5@iki.fi
Invent new RawParseModes that allow the core grammar to handle
pl/pgsql expressions and assignments directly, and thereby get rid
of a lot of hackery in pl/pgsql's parser. This moves a good deal
of knowledge about pl/pgsql into the core code: notably, we have to
invent a CoercionContext that matches pl/pgsql's (rather dubious)
historical behavior for assignment coercions. That's getting away
from the original idea of pl/pgsql as an arm's-length extension of
the core, but really we crossed that bridge a long time ago.
The main advantage of doing this is that we can now use the core
parser to generate FieldStore and/or SubscriptingRef nodes to handle
assignments to pl/pgsql variables that are records or arrays. That
fixes a number of cases that had never been implemented in pl/pgsql
assignment, such as nested records and array slicing, and it allows
pl/pgsql assignment to support the datatype-specific subscripting
behaviors introduced in commit c7aba7c14.
There are cosmetic benefits too: when a syntax error occurs in a
pl/pgsql expression, the error report no longer includes the confusing
"SELECT" keyword that used to get prefixed to the expression text.
Also, there seem to be some small speed gains.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
This patch allows PREPARE-time decoding of two-phase transactions (if the
output plugin supports this capability), in which case the transactions
are replayed at PREPARE and then committed later when COMMIT PREPARED
arrives.
Now that we decode the changes before the commit, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We detect such failures with a special sqlerrcode
ERRCODE_TRANSACTION_ROLLBACK introduced by commit 7259736a6e and stop
decoding the remaining changes. Then we rollback the changes when rollback
prepared is encountered.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, Arseny Sher, and Dilip Kumar
Tested-by: Takamichi Osumi
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
This adds six methods to the output plugin API, adding support for
streaming changes of two-phase transactions at prepare time.
* begin_prepare
* filter_prepare
* prepare
* commit_prepared
* rollback_prepared
* stream_prepare
Most of this is a simple extension of the existing methods, with the
semantic difference that the transaction is not yet committed and maybe
aborted later.
Until now two-phase transactions were translated into regular transactions
on the subscriber, and the GID was not forwarded to it. None of the
two-phase commands were communicated to the subscriber.
This patch provides the infrastructure for logical decoding plugins to be
informed of two-phase commands Like PREPARE TRANSACTION, COMMIT PREPARED
and ROLLBACK PREPARED commands with the corresponding GID.
This also extends the 'test_decoding' plugin, implementing these new
methods.
This commit simply adds these new APIs and the upcoming patch to "allow
the decoding at prepare time in ReorderBuffer" will use these APIs.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, and Dilip Kumar
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
Those two modules included references to libpq's source path, without
using anything from libpq. Some copy-pastos done when each module was
created are likely at the origin of those useless references (aecf5ee
for old_snapshot, fe59e56 for adminpack).
Reviewed-by: Tom Lane, David Rowley
Discussion: https://postgr.es/m/X+LQpfLyk7jgzUki@paquier.xyz
In postgres_fdw, the cached connections to foreign servers will not be
closed until the local session exits if the user mappings or foreign servers
that those connections depend on are dropped. Those connections can be
leaked.
To fix that connection leak issue, after a change to a pg_foreign_server
or pg_user_mapping catalog entry, this commit makes postgres_fdw close
the connections depending on that entry immediately if current
transaction has not used those connections yet. Otherwise, mark those
connections as invalid and then close them at the end of current transaction,
since they cannot be closed in the midst of the transaction using them.
Closed connections will be remade at the next opportunity if necessary.
Back-patch to all supported branches.
Author: Bharath Rupireddy
Reviewed-by: Zhihong Yu, Zhijie Hou, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVNcGH_6qLY-4_tXz8JLvA+4yeBThRfxMz7Oxbk1aHcpQ@mail.gmail.com
If a database shutdown (smart or fast) is commanded between the time
some process decides to request a new background worker and the time
that the postmaster can launch that worker, then nothing happens
because the postmaster won't launch any bgworkers once it's exited
PM_RUN state. This is fine ... unless the requesting process is
waiting for that worker to finish (or even for it to start); in that
case the requestor is stuck, and only manual intervention will get us
to the point of being able to shut down.
To fix, cancel pending requests for workers when the postmaster sends
shutdown (SIGTERM) signals, and similarly cancel any new requests that
arrive after that point. (We can optimize things slightly by only
doing the cancellation for workers that have waiters.) To fit within
the existing bgworker APIs, the "cancel" is made to look like the
worker was started and immediately stopped, causing deregistration of
the bgworker entry. Waiting processes would have to deal with
premature worker exit anyway, so this should introduce no bugs that
weren't there before. We do have a side effect that registration
records for restartable bgworkers might disappear when theoretically
they should have remained in place; but since we're shutting down,
that shouldn't matter.
Back-patch to v10. There might be value in putting this into 9.6
as well, but the management of bgworkers is a bit different there
(notably see 8ff518699) and I'm not convinced it's worth the effort
to validate the patch for that branch.
Discussion: https://postgr.es/m/661570.1608673226@sss.pgh.pa.us
Bad things happen if the DBA issues "pg_ctl stop -m fast" before
autoprewarm finishes loading its list of blocks to prewarm.
The current worker process successfully terminates early, but
(if this wasn't the last database with blocks to prewarm) the
leader process will just try to launch another worker for the
next database. Since the postmaster is now in PM_WAIT_BACKENDS
state, it ignores the launch request, and the leader just sits
until it's killed manually.
This is mostly the fault of our half-baked design for launching
background workers, but a proper fix for that is likely to be
too invasive to be back-patchable. To ameliorate the situation,
fix apw_load_buffers() to check whether SIGTERM has arrived
just before trying to launch another worker. That leaves us with
only a very narrow window in each worker launch where SIGTERM
could occur between the launch request and successful worker start.
Another issue is that if the leader process does manage to exit,
it unconditionally rewrites autoprewarm.blocks with only the
blocks currently in shared buffers, thus forgetting any blocks
that we hadn't reached yet while prewarming. This seems quite
unhelpful, since the next database start will then not have the
expected prewarming benefit. Fix it to not modify the file if
we shut down before the initial load attempt is complete.
Per bug #16785 from John Thompson. Back-patch to v11 where
the autoprewarm code was introduced.
Discussion: https://postgr.es/m/16785-c0207d8c67fb5f25@postgresql.org
The same logic was present for collation commands, SASLprep and
pgcrypto, so this removes some code.
Author: Michael Paquier
Reviewed-by: Stephen Frost, Heikki Linnakangas
Discussion: https://postgr.es/m/X9womIn6rne6Gud2@paquier.xyz
This commit adds "stats_reset" column into the pg_stat_statements_info
view. This column indicates the time at which all statistics in the
pg_stat_statements view were last reset.
Per discussion, this commit also changes pg_stat_statements_info code
so that "dealloc" column is reset at the same time as "stats_reset" is reset,
i.e., whenever all pg_stat_statements entries are removed, for the sake
of consistency. Previously "dealloc" was reset only when
pg_stat_statements_reset(0, 0, 0) is called and was not reset when
pg_stat_statements_reset() with non-zero value argument discards all
entries. This was confusing.
Author: Naoki Nakamichi, Yuki Seino
Reviewed-by: Yuki Seino, Kyotaro Horiguchi, Li Japin, Fujii Masao
Discussion: https://postgr.es/m/c102cf3180d0ee73c1c5a0f7f8558322@oss.nttdata.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
This adjusts some code related to recent changes for cryptohash
functions:
- Add a variable in md5.h to track down the size of a computed result,
moved from pgcrypto. Note that pg_md5_hash() assumed a result of this
size already.
- Call explicit_bzero() on the hashed data when freeing the context for
fallback implementations. For MD5, particularly, it would be annoying
to leave some non-zeroed data around.
- Clean up some code related to recent changes of uuid-ossp. .gitignore
still included md5.c and a comment was incorrect.
Discussion: https://postgr.es/m/X9HXKTgrvJvYO7Oh@paquier.xyz
This is basically a finger exercise to prove that it's possible for
an extension module to add subscripting ability. Subscripted fetch
from an hstore is not different from the existing "hstore -> text"
operator. Subscripted update does seem to be a little easier to
use than the traditional update method using hstore concatenation,
but it's not a fundamentally new ability.
However, there may be some value in the code as sample code, since
it shows what's basically the minimum-complexity way to implement
subscripting when one needn't consider nested container objects.
Discussion: https://postgr.es/m/3724341.1607551174@sss.pgh.pa.us
This module had a dependency on pgcrypto's md5.c that got removed by
b67b57a. Instead of the code from pgcrypto, this code can just use the
new cryptohash routines for MD5 as a drop-in replacement, so let's just
do this switch. This has also the merit to simplify a bit the
compilation of uuid-ossp.
This requires --with-uuid to be reproduced, and I have used e2fs as a
way to reproduce the failure, then test this commit.
Per reports from buildfarm members longfin, florican and sifaka.
Discussion: https://postgr.es/m/X9GToVd3QmWeNvj8@paquier.xyz
This commit heavily reorganizes the MD5 implementations that exist in
the tree in various aspects.
First, MD5 is added to the list of options available in cryptohash.c and
cryptohash_openssl.c. This means that if building with OpenSSL, EVP is
used for MD5 instead of the fallback implementation that Postgres had
for ages. With the recent refactoring work for cryptohash functions,
this change is straight-forward. If not building with OpenSSL, a
fallback implementation internal to src/common/ is used.
Second, this reduces the number of MD5 implementations present in the
tree from two to one, by moving the KAME implementation from pgcrypto to
src/common/, and by removing the implementation that existed in
src/common/. KAME was already structured with an init/update/final set
of routines by pgcrypto (see original pgcrypto/md5.h) for compatibility
with OpenSSL, so moving it to src/common/ has proved to be a
straight-forward move, requiring no actual manipulation of the internals
of each routine. Some benchmarking has not shown any performance gap
between both implementations.
Similarly to the fallback implementation used for SHA2, the fallback
implementation of MD5 is moved to src/common/md5.c with an internal
header called md5_int.h for the init, update and final routines. This
gets then consumed by cryptohash.c.
The original routines used for MD5-hashed passwords are moved to a
separate file called md5_common.c, also in src/common/, aimed at being
shared between all MD5 implementations as utility routines to keep
compatibility with any code relying on them.
Like the SHA2 changes, this commit had its round of tests on both Linux
and Windows, across all versions of OpenSSL supported on HEAD, with and
even without OpenSSL.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20201106073434.GA4961@paquier.xyz
This patch generalizes the subscripting infrastructure so that any
data type can be subscripted, if it provides a handler function to
define what that means. Traditional variable-length (varlena) arrays
all use array_subscript_handler(), while the existing fixed-length
types that support subscripting use raw_array_subscript_handler().
It's expected that other types that want to use subscripting notation
will define their own handlers. (This patch provides no such new
features, though; it only lays the foundation for them.)
To do this, move the parser's semantic processing of subscripts
(including coercion to whatever data type is required) into a
method callback supplied by the handler. On the execution side,
replace the ExecEvalSubscriptingRef* layer of functions with direct
calls to callback-supplied execution routines. (Thus, essentially
no new run-time overhead should be caused by this patch. Indeed,
there is room to remove some overhead by supplying specialized
execution routines. This patch does a little bit in that line,
but more could be done.)
Additional work is required here and there to remove formerly
hard-wired assumptions about the result type, collation, etc
of a SubscriptingRef expression node; and to remove assumptions
that the subscript values must be integers.
One useful side-effect of this is that we now have a less squishy
mechanism for identifying whether a data type is a "true" array:
instead of wiring in weird rules about typlen, we can look to see
if pg_type.typsubscript == F_ARRAY_SUBSCRIPT_HANDLER. For this
to be bulletproof, we have to forbid user-defined types from using
that handler directly; but there seems no good reason for them to
do so.
This patch also removes assumptions that the number of subscripts
is limited to MAXDIM (6), or indeed has any hard-wired limit.
That limit still applies to types handled by array_subscript_handler
or raw_array_subscript_handler, but to discourage other dependencies
on this constant, I've moved it from c.h to utils/array.h.
Dmitry Dolgov, reviewed at various times by Tom Lane, Arthur Zakirov,
Peter Eisentraut, Pavel Stehule
Discussion: https://postgr.es/m/CA+q6zcVDuGBv=M0FqBYX8DPebS3F_0KQ6OVFobGJPM507_SZ_w@mail.gmail.com
Discussion: https://postgr.es/m/CA+q6zcVovR+XY4mfk-7oNk-rF91gH0PebnNfuUjuuDsyHjOcVA@mail.gmail.com
The following routines are called within pgcrypto when handling digests
but there were no checks for failures:
- EVP_MD_CTX_size (can fail with -1 as of 3.0.0)
- EVP_MD_CTX_block_size (can fail with -1 as of 3.0.0)
- EVP_DigestInit_ex
- EVP_DigestUpdate
- EVP_DigestFinal_ex
A set of elog(ERROR) is added by this commit to detect such failures,
that should never happen except in the event of a processing failure
internal to OpenSSL.
Note that it would be possible to use ERR_reason_error_string() to get
more context about such errors, but these refer mainly to the internals
of OpenSSL, so it is not really obvious how useful that would be. This
is left out for simplicity.
Per report from Coverity. Thanks to Tom Lane for the discussion.
Backpatch-through: 9.5
Two new routines to allocate a hash context and to free it are created,
as these become necessary for the goal behind this refactoring: switch
the all cryptohash implementations for OpenSSL to use EVP (for FIPS and
also because upstream does not recommend the use of low-level cryptohash
functions for 20 years). Note that OpenSSL hides the internals of
cryptohash contexts since 1.1.0, so it is necessary to leave the
allocation to OpenSSL itself, explaining the need for those two new
routines. This part is going to require more work to properly track
hash contexts with resource owners, but this not introduced here.
Still, this refactoring makes the move possible.
This reduces the number of routines for all SHA2 implementations from
twelve (SHA{224,256,386,512} with init, update and final calls) to five
(create, free, init, update and final calls) by incorporating the hash
type directly into the hash context data.
The new cryptohash routines are moved to a new file, called cryptohash.c
for the fallback implementations, with SHA2 specifics becoming a part
internal to src/common/. OpenSSL specifics are part of
cryptohash_openssl.c. This infrastructure is usable for more hash
types, like MD5 or HMAC.
Any code paths using the internal SHA2 routines are adapted to report
correctly errors, which are most of the changes of this commit. The
zones mostly impacted are checksum manifests, libpq and SCRAM.
Note that e21cbb4 was a first attempt to switch SHA2 to EVP, but it
lacked the refactoring needed for libpq, as done here.
This patch has been tested on Linux and Windows, with and without
OpenSSL, and down to 1.0.1, the oldest version supported on HEAD.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
If more distinct statements than pg_stat_statements.max are observed,
pg_stat_statements entries about the least-executed statements are
deallocated. This commit enables us to track the total number of times
those entries were deallocated. That number can be viewed in the
pg_stat_statements_info view that this commit adds. It's useful when
tuning pg_stat_statements.max parameter. If it's high, i.e., the entries
are deallocated very frequently, which might cause the performance
regression and we can increase pg_stat_statements.max to avoid those
frequent deallocations.
The pg_stat_statements_info view is intended to display the statistics
of pg_stat_statements module itself. Currently it has only one column
"dealloc" indicating the number of times entries were deallocated.
But an upcoming patch will add other columns (for example, the time
at which pg_stat_statements statistics were last reset) into the view.
Author: Katsuragi Yuta, Yuki Seino
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0d9f1107772cf5c3f954e985464c7298@oss.nttdata.com
The function converted the first argument i.e. the number of tuples to
return into an unsigned integer which turns out to be huge number when
a negative value is passed. This causes the function to take much
longer time to execute. Instead, reject a negative value.
(If someone really wants to generate many more result rows, they
should consider adding a bigint or numeric variant.)
While at it, improve SQL test to test the number of tuples returned by
this function.
Author: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/CAG-ACPW3PUUmSnM6cLa9Rw4BEC5cEMKjX8Gogc8gvQcT3cYA1A@mail.gmail.com
Commit 0a2bc5d61e changed the order that permissions on the final and
transition functions of an aggregate are checked in. That shows up as a
difference in the order the LOG messages in this sepgsql regression test
are printed. Adjust the expected output.
Per buildfarm failure in rhinoceros.
Copy.c has grown really large. Split it into more manageable parts:
- copy.c now contains only a few functions that are common to COPY FROM
and COPY TO.
- copyto.c contains code for COPY TO.
- copyfrom.c contains code for initializing COPY FROM, and inserting the
tuples to the correct table.
- copyfromparse.c contains code for reading from the client/file/program,
and parsing the input text/CSV/binary format into tuples.
All of these parts are fairly complicated, and fairly independent of each
other. There is a patch being discussed to implement parallel COPY FROM,
which will add a lot of new code to the COPY FROM path, and another patch
which would allow INSERTs to use the same multi-insert machinery as COPY
FROM, both of which will require refactoring that code. With those two
patches, there's going to be a lot of code churn in copy.c anyway, so now
seems like a good time to do this refactoring.
The CopyStateData struct is also split. All the formatting options, like
FORMAT, QUOTE, ESCAPE, are put in a new CopyFormatOption struct, which
is used by both COPY FROM and TO. Other state data are kept in separate
CopyFromStateData and CopyToStateData structs.
Reviewed-by: Soumyadeep Chakraborty, Erik Rijkers, Vignesh C, Andres Freund
Discussion: https://www.postgresql.org/message-id/8e15b560-f387-7acc-ac90-763986617bfb%40iki.fi
In streaming mode, the transaction can be decoded in multiple streams and
those streams can be interleaved with streams of other transactions. So,
we can't remember the transaction's write status in the logical decoding
context because that might get changed due to some other transactions and
lead to wrong answers for 'skip-empty-xacts' option. We decided to keep
each transaction's write status in the ReorderBufferTxn to avoid
interleaved streams changing the status of some unrelated transactions.
Diagnosed-by: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LR7=XNM_TLmpZMFuV8ZQpoxkem--NZJYf8YXmesbvwLA@mail.gmail.com
Obviously, in order to equality operator be satisfiable, target string must
contain all the trigrams of the search string. On this base, we implement
equality operator in GiST/GIN indexes with recheck.
Discussion: https://postgr.es/m/CAOBaU_YWwtT7tdggtROacjdOdeYHCz-tmSwuC-j-TOG-g97J0w%40mail.gmail.com
Author: Julien Rouhaud
Reviewed-by: Tom Lane, Alexander Korotkov, Georgios Kokolatos, Erik Rijkers
Whether from size overflow in gistSplit or from secondary splits,
picksplit is (rarely) called with exactly two items to split.
Formerly, due to special-case handling of the last item, this would
lead to access to an uninitialized cache entry; prior to PG 13 this
might have been harmless or at worst led to an incorrect union datum,
but in 13 onwards it can cause a backend crash from using an
uninitialized pointer.
Repair by removing the special case, which was deemed not to have been
appropriate anyway. Backpatch all the way, because this bug has
existed since pg_trgm was added.
Per report on IRC from user "ftzdomino". Analysis and testing by me,
patch from Alexander Korotkov.
Discussion: https://postgr.es/m/87k0usfdxg.fsf@news-spur.riddles.org.uk
911e702077 has introduced the opclass parameters including signature length
for a set of GiST opclasses. Due to copy-pasting, macro for getting the
signature length in trgm_gist.c was named LTREE_GET_ASIGLEN(). Fix that by
renaming this macro to just GET_SIGLEN().
Backpatch-through: 13
Commit 6023b7ea71 allowed pg_stat_statements to track the number
of rows retrieved or affected by some utility commands including
CREATE MATERIALIZED VIEW. However it did not track the rowcount
of REFRESH MATERIALIZED VIEW. This commit allows pg_stat_statements
to track that.
To track that, this commit changes the query completion for
REFRESH MATERIALIZED VIEW so that it saves the rowcount. But note that
the rowcount is still not displayed in the command completion tag output.
That is, the display_rowcount flag of CMDTAG_REFRESH_MATERIALIZED_VIEW
command tag is left false in cmdtaglist.h. Otherwise, the change of
completion tag output might break applications using it.
Author: Katsuragi Yuta, Seino Yuki
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/71f6bc72f8bbaa06e701f8bd2562c347@oss.nttdata.com
Discussion: https://postgr.es/m/aadbfba9-e4bb-9531-6b3a-d13c31c8f4fe@oss.nttdata.com
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Specifically, this blocks DECLARE ... WITH HOLD and firing of deferred
triggers within index expressions and materialized view queries. An
attacker having permission to create non-temp objects in at least one
schema could execute arbitrary SQL functions under the identity of the
bootstrap superuser. One can work around the vulnerability by disabling
autovacuum and not manually running ANALYZE, CLUSTER, REINDEX, CREATE
INDEX, VACUUM FULL, or REFRESH MATERIALIZED VIEW. (Don't restore from
pg_dump, since it runs some of those commands.) Plain VACUUM (without
FULL) is safe, and all commands are fine when a trusted user owns the
target object. Performance may degrade quickly under this workaround,
however. Back-patch to 9.5 (all supported versions).
Reviewed by Robert Haas. Reported by Etienne Stalmans.
Security: CVE-2020-25695
Move the system catalog index declarations from catalog/indexing.h to
the respective parent tables' catalog/pg_*.h files. The original
reason for having it split was that the old genbki system produced the
output in the order of the catalog files it read, so all the indexing
stuff needed to come separately. But this is no longer the case, and
keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
sslinfo was passing the Port->ssl member directly to OpenSSL in order
to extract information regarding the connection. This breaks the API
provided by the backend TLS implementation, as well as duplicates code
for no benefit. Rewrite to make use of the backend API as much as
possible.
Author: Daniel Gustafsson <daniel@yesql.se>
PXE_DECRYPT_FAILED exists already for decryption errors, and an
equivalent for encryption did not exist. There is one code path that
deals with such failures for OpenSSL but it used PXE_ERR_GENERIC, which
was inconsistent. This switches this code path to use the new error
PXE_ENCRYPT_FAILED instead of PXE_ERR_GENERIC, making the code used for
encryption more consistent with the decryption.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/03049139-CB7A-436E-B71B-42696D3E2EF7@yesql.se
verify_heapam() wasn't being careful to sanity-check tuple line
pointers before using them, resulting in SIGBUS on alignment-picky
architectures. Fix that, add some more test coverage.
Mark Dilger, some tweaking by me
Discussion: https://postgr.es/m/30B8E99A-2D9C-48D4-A55C-741C9D5F1563@enterprisedb.com
Fujii Masao
Peter Eisentraut
Tom Lane
Daniel Gustafsson
David Rowley
Michael Paquier
Tomas Vondra
Robert Haas
Andrew Dunstan
Noah Misch
Etsuro Fujita
Peter Geoghegan
Amit Kapila
Alvaro Herrera
Bruce Momjian
Magnus Hagander
Heikki Linnakangas
Andres Freund
Stephen Frost
Thomas Munro
Alexander Korotkov
Andrew Gierth