Checking the execution of archive_cleanup_command on a standby requires
a valid checkpoint coming from its primary, but the logic did not check
that the standby replayed up to the point of the checkpoint, causing the
test checking for the execution of archive_cleanup_command to fail.
This race was more visible in slow environments.
Issue introduced in 46dea24, so no backpatch is needed.
Author: Tom Lane
Discussion: https://postgr.es/m/4015413.1649454951@sss.pgh.pa.us
This test, introduced in df86e52, uses a second standby to check that
it is able to remove correctly RECOVERYHISTORY and RECOVERYXLOG at the
end of recovery. This standby uses the archives of the primary to
restore its contents, with some of the archive's contents coming from
the first standby previously promoted. In slow environments, it was
possible that the test did not check what it should, as the history file
generated by the promotion of the first standby may not be stored yet on
the archives the second standby feeds on. So, it could be possible that
the second standby selects an incorrect timeline, without restoring a
history file at all.
This commits adds a wait phase to make sure that the history file
required by the second standby is archived before this cluster is
created. This relies on poll_query_until() with pg_stat_file() and an
absolute path, something not supported in REL_10_STABLE.
While on it, this adds a new test to check that the history file has
been restored by looking at the logs of the second standby. This
ensures that a RECOVERYHISTORY, whose removal needs to be checked,
is created in the first place. This should make the test more robust.
This test has been introduced by df86e52, but it came in light as an
effect of the bug fixed by acf1dd42, where the extra restore_command
calls made the test much slower.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/YlT23IvsXkGuLzFi@paquier.xyz
Backpatch-through: 11
Previously we didn't, which lead to an assertion failure when resetting
partially loaded statistics. This was encountered on the buildfarm, for
as-of-yet unknown reasons.
Ttighten up a validity check when reading the stats file, verifying 'E'
signals the end of the file (rather than just stopping reading). That's then
used in a test appending to the stats file that crashed before the fix in
pgstat_drop_all_entries().
Reported by buildfarm animals mylodon and kestrel, via Tom Lane.
Discussion: https://postgr.es/m/1656446.1650043715@sss.pgh.pa.us
This function gave the wrong answer when there's more than one
RegisteredSnapshots entry, whether or not any of them is the
CatalogSnapshot. This leads to assertion failure in some scenarios
involving fetching toasted data using a cursor. (As per discussion,
I'm dubious that this is the right contract to be enforcing at all;
but it surely doesn't help to be enforcing it incorrectly.)
Fetching toasted data using a cursor is evidently under-tested,
so add a test case too.
Per report from Erik Rijkers. This is new code, so no need for
back-patch.
Discussion: https://postgr.es/m/dc9dd229-ed30-6c62-4c41-d733ffff776b@xs4all.nl
When not loading stats at startup (i.e. pgstat_discard_stats() getting
called), reset timestamps of fixed numbered stats would be left at
0. Oversight in 5891c7a8ed.
Instead use pgstat_reset_after_failure() and add tests verifying that
fixed-numbered reset timestamps are set appropriately.
Reported-By: "David G. Johnston" <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwamFuaQHKdhcMt4Gbw5+Hca2UE741B8gOOXoA=TtAd2Yw@mail.gmail.com
If a partitioned table has partitions owned by roles other than the
owner of the partitioned table, don't include them in the to-be-
clustered list. This is similar to what VACUUM FULL does (except we do
it sooner, because there is no reason to postpone it). Add a simple
test to verify that only owned partitions are clustered.
While at it, change memory context switch-and-back to occur once per
partition instead of outside of the loop.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220411140609.GF26620@telsasoft.com
This is to gather some more evidence about why buildfarm member wrasse
is failing. We should revert it (or at least scale it way back) once
that's resolved.
Discussion: https://postgr.es/m/1346227.1649887693@sss.pgh.pa.us
There was a small buglet in commit 52e4f0cd47 whereby a tuple acquired
from cache was not released, giving rise to WARNING messages; fix that.
While at it, restructure the code a bit on stylistic grounds.
Author: Hou zj <houzj.fnst@fujitsu.com>
Reported-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAHut+PvKTyhTBtYCQsP6Ph7=o-oWRSX+v+PXXLXp81-o2bazig@mail.gmail.com
Commit f4fb45d15c misguidedly tried to free some state during aggregate
finalization for json_objectagg. This resulted in attempts to access
freed memory, especially when the function is used as a window function.
Commit 4eb9798879 attempted to ameliorate that, but in fact it should
just be ripped out, which is done here. Also add some regression tests
for json_objectagg in various flavors as a window function.
Original report from Jaime Casanova, diagnosis by Andres Freund.
Discussion: https://postgr.es/m/YkfeMNYRCGhySKyg@ahch-to
We were setting MERGE source subplan's targetlist by expanding the
individual attributes of the source relation completely, early in the
parse analysis phase. This failed to work when the condition of an
action included a whole-row reference, causing setrefs.c to error out
with
ERROR: variable not found in subplan target lists
because at that point there is nothing to resolve the whole-row
reference with. We can fix this by having preprocess_targetlist expand
the source targetlist for Vars required from the source rel by all
actions. Moreover, by using this expansion mechanism we can do away
with the targetlist expansion in transformMergeStmt, which is good
because then we no longer pull in columns that aren't needed for
anything.
Add a test case for the problem.
While at it, remove some redundant code in preprocess_targetlist():
MERGE was doing separately what is already being done for UPDATE/DELETE,
so we can just rely on the latter and remove the former. (The handling
of inherited rels was different for MERGE, but that was a no-longer-
necessary hack.)
Fix outdated, related comments for fix_join_expr also.
Author: Richard Guo <guofenglinux@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Joe Wildish <joe@lateraljoin.com>
Discussion: https://postgr.es/m/fab3b90a-914d-46a9-beb0-df011ee39ee5@www.fastmail.com
These apply to traces from Test::More functions such as ok(), is(),
diag() and note(). Output from other sources (e.g. external programs
such a initdb) is not affected. The elapsed time is the time since the
last such trace (or the beginning of the test in the first case). Times
and timestamps are at millisecond precision.
Discussion: https://postgr.es/m/20220401172150.rsycz4lrn7ewruil@alap3.anarazel.de
These are usually not useful since users will use packaged
distributions and won't be interested in rebuilding their installation
from source. Also, we have only used these kinds of hints for some
features and in some places, not consistently throughout.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2552aed7-d0e9-280a-54aa-2dc7073f371d%40enterprisedb.com
Previously, the output of EXPLAIN (BUFFERS) option showed only the I/O
timing spent reading and writing shared and local buffers. This commit
adds on top of that the I/O timing for temporary buffers in the output
of EXPLAIN (for spilled external sorts, hashes, materialization. etc).
This can be helpful for users in cases where the I/O related to
temporary buffers is the bottleneck.
Like its cousin, this information is available only when track_io_timing
is enabled. Playing the patch, this is showing an extra overhead of up
to 1% even when using gettimeofday() as implementation for interval
timings, which is slightly within the usual range noise still that's
measurable.
Author: Masahiko Sawada
Reviewed-by: Georgios Kokolatos, Melanie Plageman, Julien Rouhaud,
Ranier Vilela
Discussion: https://postgr.es/m/CAD21AoAJgotTeP83p6HiAGDhs_9Fw9pZ2J=_tYTsiO5Ob-V5GQ@mail.gmail.com
With -DCATCACHE_FORCE_RELEASE a few tests failed. Those were trying to test
behavior in the absence of invalidation processing and
-DCATCACHE_FORCE_RELEASE obviously adds a lot of invalidation processing. The
test already tried to handle debug_discard_caches > 0, by disabling it for
individual tests.
Instead hide potentially problematic function calls in a wrapper function that
catches the does-not-exist error. The error isn't the actually interesting
bit, it's whether the stats entry still exist afterwards.
I confirmed that the tests still catches leaked function stats if I nuke the
protections against that in pgstat_function.c.
Per buildfarm animal prion.
Discussion: https://postgr.es/m/20220407165709.jgdkrzqlkcwue6ko@alap3.anarazel.de
- subscriber stats reset path was untested
- slot stat sreset path for all slots was untested
- pg_stat_database.sessions etc was untested
- pg_stat_reset_shared() was untested, for any kind of shared stats
- pg_stat_reset() was untested
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Window functions such as row_number() always return a value higher than
the previously returned value for tuples in any given window partition.
Traditionally queries such as;
SELECT * FROM (
SELECT *, row_number() over (order by c) rn
FROM t
) t WHERE rn <= 10;
were executed fairly inefficiently. Neither the query planner nor the
executor knew that once rn made it to 11 that nothing further would match
the outer query's WHERE clause. It would blindly continue until all
tuples were exhausted from the subquery.
Here we implement means to make the above execute more efficiently.
This is done by way of adding a pg_proc.prosupport function to various of
the built-in window functions and adding supporting code to allow the
support function to inform the planner if the window function is
monotonically increasing, monotonically decreasing, both or neither. The
planner is then able to make use of that information and possibly allow
the executor to short-circuit execution by way of adding a "run condition"
to the WindowAgg to allow it to determine if some of its execution work
can be skipped.
This "run condition" is not like a normal filter. These run conditions
are only built using quals comparing values to monotonic window functions.
For monotonic increasing functions, quals making use of the btree
operators for <, <= and = can be used (assuming the window function column
is on the left). You can see here that once such a condition becomes false
that a monotonic increasing function could never make it subsequently true
again. For monotonically decreasing functions the >, >= and = btree
operators for the given type can be used for run conditions.
The best-case situation for this is when there is a single WindowAgg node
without a PARTITION BY clause. Here when the run condition becomes false
the WindowAgg node can simply return NULL. No more tuples will ever match
the run condition. It's a little more complex when there is a PARTITION
BY clause. In this case, we cannot return NULL as we must still process
other partitions. To speed this case up we pull tuples from the outer
plan to check if they're from the same partition and simply discard them
if they are. When we find a tuple belonging to another partition we start
processing as normal again until the run condition becomes false or we run
out of tuples to process.
When there are multiple WindowAgg nodes to evaluate then this complicates
the situation. For intermediate WindowAggs we must ensure we always
return all tuples to the calling node. Any filtering done could lead to
incorrect results in WindowAgg nodes above. For all intermediate nodes,
we can still save some work when the run condition becomes false. We've
no need to evaluate the WindowFuncs anymore. Other WindowAgg nodes cannot
reference the value of these and these tuples will not appear in the final
result anyway. The savings here are small in comparison to what can be
saved in the top-level WingowAgg, but still worthwhile.
Intermediate WindowAgg nodes never filter out tuples, but here we change
WindowAgg so that the top-level WindowAgg filters out tuples that don't
match the intermediate WindowAgg node's run condition. Such filters
appear in the "Filter" clause in EXPLAIN for the top-level WindowAgg node.
Here we add prosupport functions to allow the above to work for;
row_number(), rank(), dense_rank(), count(*) and count(expr). It appears
technically possible to do the same for min() and max(), however, it seems
unlikely to be useful enough, so that's not done here.
Bump catversion
Author: David Rowley
Reviewed-by: Andy Fan, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqvp3At8++yF8ij06sdcoo1S_b2YoaT9D4Nf+MObzsrLQ@mail.gmail.com
Previously none of our tests triggered recovery conflicts. The test is
primarily motivated by needing tests for recovery conflict stats for shared
memory based pgstats. But it's also a decent start for recovery conflict
handling in general.
The only type of recovery conflict not tested yet are rcovery deadlock
conflicts.
By configuring log_recovery_conflict_waits the test adds some very minimal
testing for that path as well.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Tests that standbys:
- drop stats for objects when the those records are replayed
- persist stats across graceful restarts
- discard stats after immediate / crash restarts
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Test that stats are restored during normal restarts, discarded after a crash /
immediate restart, and that a corrupted stats file leads to stats being reset.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Modify the subroutines called by RI trigger functions that want to check
if a given referenced value exists in the referenced relation to simply
scan the foreign key constraint's unique index, instead of using SPI to
execute
SELECT 1 FROM referenced_relation WHERE ref_key = $1
This saves a lot of work, especially when inserting into or updating a
referencing relation.
This rewrite allows to fix a PK row visibility bug caused by a partition
descriptor hack which requires ActiveSnapshot to be set to come up with
the correct set of partitions for the RI query running under REPEATABLE
READ isolation. We now set that snapshot indepedently of the snapshot
to be used by the PK index scan, so the two no longer interfere. The
buggy output in src/test/isolation/expected/fk-snapshot.out of the
relevant test case added by commit 00cb86e75d has been corrected.
(The bug still exists in branch 14, however, but this fix is too
invasive to backpatch.)
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Li Japin <japinli@hotmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CA+HiwqGkfJfYdeq5vHPh6eqPKjSbfpDDY+j-kXYFePQedtSLeg@mail.gmail.com
They are to check the behavior of RI_FKey_check() and
ri_Check_Pk_Match(). A test case whereby RI_FKey_check() queries a
partitioned PK table under REPEATABLE READ isolation produces wrong
output due to a bug of the partition-descriptor logic and that is noted
as such in the comment in the test. A subsequent commit will fix the
bug and replace the buggy output by the correct one.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/1627848.1636676261@sss.pgh.pa.us
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
It might be worth instead splitting the test up to produce a smaller
alternative output file. But that's not trivial either, due to the number of
steps defined. And more than I want to do tonight.
Per buildfarm.
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
In the stats collector days it was hard to write tests for the stats system,
because fundamentally delivery of stats messages over UDP was not
synchronous (nor guaranteed). Now we easily can force pending stats updates to
be flushed synchronously.
This moves stats.sql into a parallel group, there isn't a reason for it to run
in isolation anymore. And it may shake out some bugs.
Bumps catversion.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
With stats now being stored in shared memory, the GUC isn't needed
anymore. However, the pg_stat_tmp directory and PG_STAT_TMP_DIR define are
kept, as pg_stat_statements (and some out-of-core extensions) store data in
it.
Docs will be updated in a subsequent commit, together with the other pending
docs updates due to shared memory stats.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220330233550.eiwsbearu6xhuqwe@alap3.anarazel.de
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
The column 'subskiplsn' uses TYPALIGN_DOUBLE (which has 4 bytes alignment
on AIX) for storage. But the C Struct (Form_pg_subscription) has 8-byte
alignment for this field, so retrieving it from storage causes an
unaligned read.
To fix this, we rearranged the 'subskiplsn' column in the catalog so that
it naturally comes at an 8-byte boundary.
We have fixed a similar problem in commit f3b421da5f. This patch adds a
test to avoid a similar mistake in the future.
Reported-by: Noah Misch
Diagnosed-by: Noah Misch, Masahiko Sawada, Amit Kapila
Author: Masahiko Sawada
Reviewed-by: Noah Misch, Amit Kapila
Discussion: https://postgr.es/m/20220401074423.GC3682158@rfd.leadboat.comhttps://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
The test created a 1m row table in order to test parallel operation of
JSON_VALUE. However, this was more than were needed for the test, so
save time by halving it, and also by making the table unlogged.
Experimentation shows that this size is only a little above the number
required to generate the expected output.
Per gripe from Andres Freund
Discussion: https://postgr.es/m/20220406022118.3ocqvhxr6kciw5am@alap3.anarazel.de
It's possible for the query that "waits for restart" to complete a
successful iteration before the postmaster has noticed its SIGKILL'd
child and begun the restart cycle. (This is a bit hard to believe
perhaps, but it's been seen at least twice in the buildfarm, mainly
on ancient platforms that likely have quirky schedulers.)
To provide a more secure interlock, wait for the other session
we're using to report that it's been forcibly shut down.
Patch by me, based on a suggestion from Andres Freund.
Back-patch to v14 where this test case came in.
Discussion: https://postgr.es/m/1801850.1649047827@sss.pgh.pa.us
These clauses allow the user to specify how data from nested paths are
joined, allowing considerable freedom in shaping the tabular output of
JSON_TABLE.
PLAN DEFAULT allows the user to specify the global strategies when
dealing with sibling or child nested paths. The is often sufficient to
achieve the necessary goal, and is considerably simpler than the full
PLAN clause, which allows the user to specify the strategy to be used
for each named nested path.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
The expected backend message after SIGQUIT changed in commit
7e784d1dc, but we missed updating this test case. Also, experience
shows that we might sometimes get "could not send data to server"
instead of either of the libpq messages the test is looking for.
Per report from Mark Dilger. Back-patch to v14 where the
backend message changed.
Discussion: https://postgr.es/m/17BD82D7-49AC-40C9-8204-E7ADD30321A0@enterprisedb.com
This feature allows jsonb data to be treated as a table and thus used in
a FROM clause like other tabular data. Data can be selected from the
jsonb using jsonpath expressions, and hoisted out of nested structures
in the jsonb to form multiple rows, more or less like an outer join.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu (whose
name I previously misspelled), Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a51306722 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
This script runs the core regression tests with quite a small value of
shared_buffers, making it prone to breakage due to synchronize_seqscans
kicking in where the tests don't expect that. Disable that feature to
stabilize the tests.
Discussion: https://postgr.es/m/1258185.1648876239@sss.pgh.pa.us
datetime.c's parsing logic has assumed that strtod() will accept
a string that looks like ".", which it does in glibc, but not on
some less-common platforms such as AIX. The result of this was
that datetime fields like "123." would be accepted on some platforms
but not others; which is a sufficiently odd case that it's not that
surprising we've heard no field complaints. But commit e39f99046
extended that assumption to new places, and happened to add a test
case that exposed the platform dependency. Remove this dependency
by special-casing situations without any digits after the decimal
point.
(Again, this is in part a pre-existing bug but I don't feel a
compulsion to back-patch.)
Also, rearrange e39f99046's changes in formatting.c to avoid a
Coverity complaint that we were copying an uninitialized field.
Discussion: https://postgr.es/m/1592893.1648969747@sss.pgh.pa.us
When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
DecodeInterval (interval input) was careless about integer-overflow
hazards, allowing bogus results to be obtained for sufficiently
large input values. Also, since it initially converted the input
to a "struct tm", it was impossible to produce the full range of
representable interval values.
Meanwhile, EncodeInterval (interval output) and a few other
functions could suffer failures if asked to process sufficiently
large interval values, because they also relied on being able to
represent an interval in "struct tm" which is not designed to
handle that.
Fix all this stuff by introducing new struct types that are more
fit for purpose.
While this is clearly a bug fix, it's also an API break for any
code that's calling these functions directly. So back-patching
doesn't seem wise, especially in view of the lack of field
complaints.
Joe Koshakow, editorialized a bit by me
Discussion: https://postgr.es/m/CAAvxfHff0JLYHwyBrtMx_=6wr=k2Xp+D+-X3vEhHjJYMj+mQcg@mail.gmail.com
Cover some cases that would have been broken by a proposed patch,
but we failed to notice for lack of test coverage. I'm pushing
this separately mainly to memorialize that it *is* our historical
behavior.
Discussion: https://postgr.es/m/1344498.1648920056@sss.pgh.pa.us
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
The buildfarm has revealed some instability in results from catalog
queries in tests from commit 1a36bc9dba. Cure this by adding ORDER BY
to such queries.
The current implementation supports exactly one IP address in a server
certificate's Common Name, which is brittle (the strings must match
exactly). This patch adds support for IPv4 and IPv6 addresses in a
server's Subject Alternative Names.
Per discussion on-list:
- If the client's expected host is an IP address, we allow fallback to
the Subject Common Name if an iPAddress SAN is not present, even if
a dNSName is present. This matches the behavior of NSS, in
violation of the relevant RFCs.
- We also, counter-intuitively, match IP addresses embedded in dNSName
SANs. From inspection this appears to have been the behavior since
the SAN matching feature was introduced in acd08d76.
- Unlike NSS, we don't map IPv4 to IPv6 addresses, or vice-versa.
Author: Jacob Champion <pchampion@vmware.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9f5f20974cd3a4091a788cf7f00ab663d5fcdffe.camel@vmware.com
This patch is extracted from a larger patch that allowed setting the
default returned value from these functions to json or jsonb. That had
problems, but this piece of it is fine. For these functions only json or
jsonb can be specified in the RETURNING clause.
Extracted from an original patch from Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Commit fb16d2c658 used the old but not quite old enough parent module,
which dates to perl version 5.10.1 as a core module. We still have a
dinosaur or two running older versions of perl, so rather than require
an upgrade in those we simply do in place what parent.pm's import()
would have done for us.
Reviewed by Tom Lane
Discussion: https://postgr.es/m/474104.1648685981@sss.pgh.pa.us
When we create or alter a subscription to add publications raise a warning
for non-existent publications. We don't want to give an error here because
it is possible that users can later create the missing publications.
Author: Vignesh C
Reviewed-by: Bharath Rupireddy, Japin Li, Dilip Kumar, Euler Taveira, Ashutosh Sharma, Amit Kapila
Discussion: https://postgr.es/m/CALDaNm0f4YujGW+q-Di0CbZpnQKFFrXntikaQQKuEmGG0=Zw=Q@mail.gmail.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
This Patch introduces three SQL standard JSON functions:
JSON() (incorrectly mentioned in my commit message for f4fb45d15c)
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values, and
has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value, including
json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis or
represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
We do this via a subclass for any branch older than the minimum known
to be compatible with the main package (currently release 12).
This should be useful for constructing cross-version tests.
In theory this could be extended back any number of versions, with
varying degrees of compatibility.
Reviewed by Michael Paquier and Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/a3efd19a-d5c9-fdf2-6094-4cde056a2708@dunslane.net
COPY FROM supports the HEADER option to silently discard the header
line from a CSV or text file. It is possible to load by mistake a
file that matches the expected format, for example, if two text
columns have been swapped, resulting in garbage in the database.
This adds a new option value HEADER MATCH that checks the column names
in the header line against the actual column names and errors out if
they do not match.
Author: Rémi Lapeyre <remi.lapeyre@lenstra.fr>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAF1-J-0PtCWMeLtswwGV2M70U26n4g33gpe1rcKQqe6wVQDrFA@mail.gmail.com
The current logical replication behavior is to send every transaction to
subscriber even if the transaction is empty. This can happen because
transaction doesn't contain changes from the selected publications or all
the changes got filtered. It is a waste of CPU cycles and network
bandwidth to build/transmit these empty transactions.
This patch addresses the above problem by postponing the BEGIN message
until the first change is sent. While processing a COMMIT message, if
there was no other change for that transaction, do not send the COMMIT
message. This allows us to skip sending BEGIN/COMMIT messages for empty
transactions.
When skipping empty transactions in synchronous replication mode, we send
a keepalive message to avoid delaying such transactions.
Author: Ajin Cherian, Hou Zhijie, Euler Taveira
Reviewed-by: Peter Smith, Takamichi Osumi, Shi Yu, Masahiko Sawada, Greg Nancarrow, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAMkU=1yohp9-dv48FLoSPrMqYEyyS5ZWkaZGD41RJr10xiNo_Q@mail.gmail.com
Curently, some TAP test that directly call the underlying function
PostgreSQL::Test::Utils::run_log() care about the return value, but
none of those that call it via PostgreSQL::Test::Cluster::run_log() care.
However, I'd like to add a test that will care, so adjust this function
to return whatever it gets back from the underlying function, just as
we do for a number of other functions in this module.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
This introduces the SQL/JSON functions for querying JSON data using
jsonpath expressions. The functions are:
JSON_EXISTS()
JSON_QUERY()
JSON_VALUE()
All of these functions only operate on jsonb. The workaround for now is
to cast the argument to jsonb.
JSON_EXISTS() tests if the jsonpath expression applied to the jsonb
value yields any values. JSON_VALUE() must return a single value, and an
error occurs if it tries to return multiple values. JSON_QUERY() must
return a json object or array, and there are various WRAPPER options for
handling scalar or multi-value results. Both these functions have
options for handling EMPTY and ERROR conditions.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This view is similar to pg_hba_file_rules view, except that it is
associated with the parsing of pg_ident.conf. Similarly to its cousin,
this view is useful to check via SQL if changes planned in pg_ident.conf
would work upon reload or restart, or to diagnose a previous failure.
Bumps catalog version.
Author: Julien Rouhaud
Reviewed-by: Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
The regression tests include a query to check the execution path of
pg_hba_file_rules, but it has never checked that a given cluster has
correct contents in pg_hba.conf. This commit extends the query of
pg_hba_file_rules to report any errors if anything bad is found. For
EXEC_BACKEND builds, any connection attempt would fail when loading
pg_hba.conf if any incorrect content is found when parsed, so a failure
would be detected before even running this query. However, this can
become handy for clusters where pg_hba.conf can be reloaded, where new
connection attempts are not subject to a fresh loading of pg_hba.conf.
Author: Julien Rouhaud, based on an idea from me
Discussion: https://postgr.es/m/YkFhpydhyeNNo3Xl@paquier.xyz
This patch intrdocuces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON as well as on the json and
jsonb types. Each test has an IS and IS NOT variant. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
IS JSON WITH | WITHOUT UNIQUE KEYS
These are mostly self-explanatory, but note that IS JSON WITHOUT UNIQUE
KEYS is true whenever IS JSON is true, and IS JSON WITH UNIQUE KEYS is
true whenever IS JSON is true except it IS JSON OBJECT is true and there
are duplicate keys (which is never the case when applied to jsonb values).
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Generally if a role is granted membership to another role with NOINHERIT
they must use SET ROLE to access the privileges of that role, however
with predefined roles the membership and privilege is conflated. Fix that
by replacing is_member_of_role with has_privs_for_role for predefined
roles. Patch does not remove is_member_of_role from acl.h, but it does
add a warning not to use that function for privilege checking. Not
backpatched based on hackers list discussion.
Author: Joshua Brindle
Reviewed-by: Stephen Frost, Nathan Bossart, Joe Conway
Discussion: https://postgr.es/m/flat/CAGB+Vh4Zv_TvKt2tv3QNS6tUM_F_9icmuj0zjywwcgVi4PAhFA@mail.gmail.com
Commit f9fd176461 effectively gave
every role ADMIN OPTION on itself. However, this appears to be
something that happened accidentally as a result of refactoring
work rather than an intentional decision. Almost a decade later,
it was discovered that this was a security vulnerability. As a
result, commit fea164a72a restricted
this implicit ADMIN OPTION privilege to be exercisable only when
the role being administered is the same as the session user and
when no security-restricted operation is in progress. That
commit also documented the existence of this implicit privilege
for what seems to be the first time.
The effect of the privilege is to allow a login role to grant
the privileges of that role, and optionally ADMIN OPTION on it,
to some other role. That's an unusual thing to do, because generally
membership is granted in roles used as groups, rather than roles
used as users. Therefore, it does not seem likely that removing
the privilege will break things for many PostgreSQL users.
However, it will make it easier to reason about the permissions
system. This is the only case where a user who has not been given any
special permission (superuser, or ADMIN OPTION on some role) can
modify role membership, so removing it makes things more consistent.
For example, if a superuser sets up role A and B and grants A to B
but no other privileges to anyone, she can now be sure that no one
else will be able to revoke that grant. Without this change, that
would have been true only if A was a non-login role.
Patch by me. Reviewed by Tom Lane and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmoawdt03kbA+dNyBcNWJpRxu0f4X=69Y3+DkXXZqmwMDLg@mail.gmail.com
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
Per ECMAScript standard (ECMA-262, referenced by SQL standard), the
syntax forms
.1
1.
should be allowed for decimal numeric literals, but the existing
implementation rejected them.
Also, by the same standard, reject trailing junk after numeric
literals.
Note that the ECMAScript standard for numeric literals is in respects
like these slightly different from the JSON standard, which might be
the original cause for this discrepancy.
A change is that this kind of syntax is now rejected:
1.type()
This needs to be written as
(1).type()
This is correct; normal JavaScript also does not accept this syntax.
We also need to fix up the jsonpath output function for this case. We
put parentheses around numeric items if they are followed by another
path item.
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/50a828cc-0a00-7791-7883-2ed06dfb2dbb@enterprisedb.com
So far the first of the retries introduced in f28bf667f6 resolves the
issue. But I (Andres) am still suspicious that the start of the failures might
indicate a problem.
To reduce noise, stop reporting a failure if a retry resolves the problem. To
allow figuring out what causes the slow slot drop, add a few more debug
messages to ReplicationSlotDropPtr.
See also commit afdeff1052, fe0972ee5e and f28bf667f6.
Discussion: https://postgr.es/m/20220327213219.smdvfkq2fl74flow@alap3.anarazel.de
pg_stat_get_replication_slot() accidentally was marked as non-strict, crashing
when called with NULL input. As it's already released, introduce an explicit
NULL check in 14, fix the catalog in HEAD.
Bumps catversion in HEAD.
Discussion: https://postgr.es/m/20220326212432.s5n2maw6kugnpyxw@alap3.anarazel.de
Backpatch: 14-, where replication slot stats were introduced
This patch introduces the SQL/JSON standard constructors for JSON:
JSON()
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
For the most part these functions provide facilities that mimic
existing json/jsonb functions. However, they also offer some useful
additional functionality. In addition to text input, the JSON() function
accepts bytea input, which it will decode and constuct a json value from.
The other functions provide useful options for handling duplicate keys
and null values.
This series of patches will be followed by a consolidated documentation
patch.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This is a follow-up to commit 7dac61402 which removed a set of unused
modules from the TAP test.
The Config references in the pg_ctl and pg_rewind tests were removed
in commit 1c6d46293. Fcntl ':mode' and File::stat in the pg_ctl test
were added in c37b3d08c which was probably a leftover from an earlier
version of the patch, as the function using these was added to another
module in that commit.
The Config reference in the ldap test was added in ee56c3b21 which in
turn use $^O instead of interrogating Config.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/87lewyqk45.fsf@wibble.ilmari.org
One of the TAP tests added in 923def9a53 did not wait after creating a
subscription, and wait_for_catchup is not sufficient for this. So if the
tablesync workers happen do not complete quickly enough, the test won't
see the expected results.
This probably explains intermittent failures on a couple buildfarm
animals (komodoensis, petalura and snapper).
Reported-by: Tom Lane
Discussion: https://postgr.es/m/170549.1648330634@sss.pgh.pa.us
The SSL TAP tests were tightly coupled to the OpenSSL implementation,
making it hard to add support for additional SSL/TLS backends. This
refactoring makes the test avoid depending on specific implementations
The SSLServer Perl module is renamed SSL::Server, which in turn use
SSL::Backend::X where X is the backend pointed to by with_ssl. Each
backend will implement its own module responsible for setting up keys,
certs and to resolve sslkey values to their implementation specific
value (file paths or vault nicknames etc). Further, switch_server_cert
now takes a set of named parameters rather than a fixed set which used
defaults. The modules also come with POD documentation.
There are a few testcases which still use OpenSSL specifics, but it's
not entirely clear how to abstract those until we have another library
implemented.
Original patch by me, with lots of rework by Andrew Dunstan to turn it
into better Perl.
Discussion: https://postgr.es/m/AA18A362-CA65-4F9A-AF61-76AE318FE97C@yesql.se
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
The previous method for doing that was to write zeroes into a
predetermined set of page locations. However, there's a roughly
1-in-64K chance that the existing checksum will match by chance,
and yesterday several buildfarm animals started to reproducibly
see that, resulting in test failures because no checksum mismatch
was reported.
Since the checksum includes the page LSN, test success depends on
the length of the installation's WAL history, which is affected by
(at least) the initial catalog contents, the set of locales installed
on the system, and the length of the pathname of the test directory.
Sooner or later we were going to hit a chance match, and today is
that day.
Harden these tests by specifically inverting the checksum field and
leaving all else alone, thereby guaranteeing that the checksum is
incorrect.
In passing, fix places that were using seek() to set up for syswrite(),
a combination that the Perl docs very explicitly warn against. We've
probably escaped problems because no regular buffered I/O is done on
these filehandles; but if it ever breaks, we wouldn't deserve or get
much sympathy.
Although we've only seen problems in HEAD, now that we recognize the
environmental dependencies it seems like it might be just a matter
of time until someone manages to hit this in back-branch testing.
Hence, back-patch to v11 where we started doing this kind of test.
Discussion: https://postgr.es/m/3192026.1648185780@sss.pgh.pa.us
Commit 75b1521dae added support for logical replication of sequences,
including grammar changes, but it did not update preprocess_pubobj_list
accordingly. This can cause segfaults with "continuations", i.e. when
command specifies a list of objects:
CREATE PUBLICATION p FOR SEQUENCE s1, s2;
Reported by Amit Kapila, patch by me.
Reported-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1JxDNKGBSNTyN-Xj2JRjzFo+ziSqJbjH==vuO0YF_CQrg@mail.gmail.com
Crash recovery on standby may encounter missing directories when
replaying create database WAL records. Prior to this patch, the standby
would fail to recover in such a case. However, the directories could be
legitimately missing. Consider a sequence of WAL records as follows:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the tablespace
directory, the standby crashes and has to replay the create database
record again, the crash recovery must be able to move on.
This patch adds a mechanism similar to invalid-page tracking, to keep a
tally of missing directories during crash recovery. If all the missing
directory references are matched with corresponding drop records at the
end of crash recovery, the standby can safely continue following the
primary.
Backpatch to 13, at least for now. The bug is older, but fixing it in
older branches requires more careful study of the interactions with
commit e6d8069522, which appeared in 13.
A new TAP test file is added to verify the condition. However, because
it depends on commit d6d317dbf6, it can only be added to branch
master. I (Álvaro) manually verified that the code behaves as expected
in branch 14. It's a bit nervous-making to leave the code uncovered by
tests in older branches, but leaving the bug unfixed is even worse.
Also, the main reason this fix took so long is precisely that we
couldn't agree on a good strategy to approach testing for the bug, so
perhaps this is the best we can do.
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Author: Paul Guo <paulguo@gmail.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
Move DLSUFFIX from makefiles into header files for all platforms.
Move the DLSUFFIX assignment from src/makefiles/ to src/templates/,
have configure read it, and then substitute it into Makefile.global
and pg_config.h. This avoids the need for all makefile rules that
need it to locally set CPPFLAGS. It also resolves an inconsistent
setup between the two Windows build systems.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/2f9861fb-8969-9005-7518-b8e60f2bead9@enterprisedb.com
Tom noticed evidence in the buildfarm suggesting the failures might just be
really slow process exits. To investigate further, instead of giving up after
seeing multiple walsender pids once, retry. For now continue to report test
failure if a retry succeeds.
See also commit afdeff1052 and fe0972ee5e.
Per suggestion from Tom Lane.
Discussion: https://postgr.es/m/3042597.1648148740@sss.pgh.pa.us
A TOAST table can normally have only one index, but there are corner
cases where it has more; for example, transiently during REINDEX
CONCURRENTLY. In such a case, the pg_statio_all_tables view produced
multiple rows for the owning table, one per TOAST index. Refactor the
view to avoid that, instead summing the stats across all the indexes,
as we do for regular table indexes.
While this has been wrong for a long time, back-patching seems unwise
due to the difficulty of putting a system view change into back
branches.
Andrei Zubkov, tweaked a bit by me
Discussion: https://postgr.es/m/acefef4189706971fc475f912c1afdab1c48d627.camel@moonset.ru
The Config and Cwd modules were no longer used, but remained imported,
in a number of tests. Remove to keep the imports to the actually used
modules.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/A5A074CD-3198-492B-BE5E-7961EFC3733F@yesql.se
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Invalidate abortedRecPtr and missingContrecPtr after a missing
continuation record is successfully skipped on a standby. This fixes a
PANIC caused when a recently promoted standby attempts to write an
OVERWRITE_RECORD with an LSN of the previously read aborted record.
Backpatch to 10 (all stable versions).
Author: Sami Imseih <simseih@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/44D259DE-7542-49C4-8A52-2AB01534DCA9@amazon.com
Commit 90efa2f556 caused some issues with EXEC_BACKEND builds and with
force_parallel_mode = regress setups. For the first issue we no longer
test if the module has been preloaded, and in fact we don't preload it,
but simply LOAD it in the test script. For the second issue we suppress
error messages emanating from parallel workers.
Mark Dilger
Discussion: https://postgr.es/m/7f6d54a1-4024-3b6e-e3ec-26cd394aac9e@dunslane.net
This includes tests of both the newly added name type object access
hooks and the older Oid type hooks, and provides a useful example
of how to use the hooks.
Mark Dilger, based on some code from Joshua Brindle.
Discussion: https://postgr.es/m/47F87A0E-C0E5-43A6-89F6-D403F2B45175@enterprisedb.com
A security invoker view checks permissions for accessing its
underlying base relations using the privileges of the user of the
view, rather than the privileges of the view owner. Additionally, if
any of the base relations are tables with RLS enabled, the policies of
the user of the view are applied, rather than those of the view owner.
This allows views to be defined without giving away additional
privileges on the underlying base relations, and matches a similar
feature available in other database systems.
It also allows views to operate more naturally with RLS, without
affecting the assignments of policies to users.
Christoph Heiss, with some additional hacking by me. Reviewed by
Laurenz Albe and Wolfgang Walther.
Discussion: https://postgr.es/m/b66dd6d6-ad3e-c6f2-8b90-47be773da240%40cybertec.at
This issue is environment-sensitive, where the SSL tests could fail in
various way by feeding on defaults provided by sslcert, sslkey,
sslrootkey, sslrootcert, sslcrl and sslcrldir coming from a local setup,
as of ~/.postgresql/ by default. Horiguchi-san has reported two
failures, but more advanced testing from me (aka inclusion of garbage
SSL configuration in ~/.postgresql/ for all the configuration
parameters) has showed dozens of failures that can be triggered in the
whole test suite.
History has showed that we are not good when it comes to address such
issues, fixing them locally like in dd87799, and such problems keep
appearing. This commit strengthens the entire test suite to put an end
to this set of problems by embedding invalid default values in all the
connection strings used in the tests. The invalid values are prefixed
in each connection string, relying on the follow-up values passed in the
connection string to enforce any invalid value previously set. Note
that two tests related to CRLs are required to fail with certain pre-set
configurations, but we can rely on enforcing an empty value instead
after the invalid set of values.
Reported-by: Kyotaro Horiguchi
Reviewed-by: Andrew Dunstan, Daniel Gustafsson, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20220316.163658.1122740600489097632.horikyota.ntt@gmail.com
backpatch-through: 10
This feature allows skipping the transaction on subscriber nodes.
If incoming change violates any constraint, logical replication stops
until it's resolved. Currently, users need to either manually resolve the
conflict by updating a subscriber-side database or by using function
pg_replication_origin_advance() to skip the conflicting transaction. This
commit introduces a simpler way to skip the conflicting transactions.
The user can specify LSN by ALTER SUBSCRIPTION ... SKIP (lsn = XXX),
which allows the apply worker to skip the transaction finished at
specified LSN. The apply worker skips all data modification changes within
the transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Hou Zhijie, Peter Eisentraut, Amit Kapila, Shi Yu, Vignesh C, Greg Nancarrow, Haiying Tang, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
The planner needs to treat GroupingFunc like Aggref for many purposes,
in particular with respect to processing of the argument expressions,
which are not to be evaluated at runtime. A few places hadn't gotten
that memo, notably including subselect.c's processing of outer-level
aggregates. This resulted in assertion failures or wrong plans for
cases in which a GROUPING() construct references an outer aggregation
level.
Also fix missing special cases for GroupingFunc in cost_qual_eval
(resulting in wrong cost estimates for GROUPING(), although it's
not clear that that would affect plan shapes in practice) and in
ruleutils.c (resulting in excess parentheses in pretty-print mode).
Per bug #17088 from Yaoguang Chen. Back-patch to all supported
branches.
Richard Guo, Tom Lane
Discussion: https://postgr.es/m/17088-e33882b387de7f5c@postgresql.org
For GENERATED columns, we record all dependencies of the generation
expression as AUTO dependencies of the column itself. This means
that the generated column is silently dropped if any dependency
is removed, even if CASCADE wasn't specified. This is at least
a POLA violation, but I think it's actually based on a misreading
of the standard. The standard does say that you can't drop a
dependent GENERATED column in RESTRICT mode; but that's buried down
in a subparagraph, on a different page from some pseudocode that
makes it look like an AUTO drop is being suggested.
Change this to be more like the way that we handle regular default
expressions, ie record the dependencies as NORMAL dependencies of
the pg_attrdef entry. Also, make the pg_attrdef entry's dependency
on the column itself be INTERNAL not AUTO. That has two effects:
* the column will go away, not just lose its default, if any
dependency of the expression is dropped with CASCADE. So we
don't need any special mechanism to make that happen.
* it provides an additional cross-check preventing someone from
dropping the default expression without dropping the column.
catversion bump because of change in the contents of pg_depend
(which also requires a change in one information_schema view).
Per bug #17439 from Kevin Humphreys. Although this is a longstanding
bug, it seems impractical to back-patch because of the need for
catalog contents changes.
Discussion: https://postgr.es/m/17439-7df4421197e928f0@postgresql.org
DROP INDEX needs to lock the index's table before the index itself,
else it will deadlock against ordinary queries that acquire the
relation locks in that order. This is correctly mechanized for
plain indexes by RangeVarCallbackForDropRelation; but in the case of
a partitioned index, we neglected to lock the child tables in advance
of locking the child indexes. We can fix that by traversing the
inheritance tree and acquiring the needed locks in RemoveRelations,
after we have acquired our locks on the parent partitioned table and
index.
While at it, do some refactoring to eliminate confusion between
the actual and expected relkind in RangeVarCallbackForDropRelation.
We can save a couple of syscache lookups too, by having that function
pass back info that RemoveRelations will need.
Back-patch to v11 where partitioned indexes were added.
Jimmy Yih, Gaurab Dey, Tom Lane
Discussion: https://postgr.es/m/BYAPR05MB645402330042E17D91A70C12BD5F9@BYAPR05MB6454.namprd05.prod.outlook.com
When an update on a partitioned table referenced in foreign key
constraints causes a row to move from one partition to another,
the fact that the move is implemented as a delete followed by an insert
on the target partition causes the foreign key triggers to have
surprising behavior. For example, a given foreign key's delete trigger
which implements the ON DELETE CASCADE clause of that key will delete
any referencing rows when triggered for that internal DELETE, although
it should not, because the referenced row is simply being moved from one
partition of the referenced root partitioned table into another, not
being deleted from it.
This commit teaches trigger.c to skip queuing such delete trigger events
on the leaf partitions in favor of an UPDATE event fired on the root
target relation. Doing so is sensible because both the old and the new
tuple "logically" belong to the root relation.
The after trigger event queuing interface now allows passing the source
and the target partitions of a particular cross-partition update when
registering the update event for the root partitioned table. Along with
the two ctids of the old and the new tuple, the after trigger event now
also stores the OIDs of those partitions. The tuples fetched from the
source and the target partitions are converted into the root table
format, if necessary, before they are passed to the trigger function.
The implementation currently has a limitation that only the foreign keys
pointing into the query's target relation are considered, not those of
its sub-partitioned partitions. That seems like a reasonable
limitation, because it sounds rare to have distinct foreign keys
pointing to sub-partitioned partitions instead of to the root table.
This misbehavior stems from commit f56f8f8da6 (which added support for
foreign keys to reference partitioned tables) not paying sufficient
attention to commit 2f17844104 (which had introduced cross-partition
updates a year earlier). Even though the former commit goes back to
Postgres 12, we're not backpatching this fix at this time for fear of
destabilizing things too much, and because there are a few ABI breaks in
it that we'd have to work around in older branches. It also depends on
commit f4566345cf, which had its own share of backpatchability issues
as well.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Eduard Català <eduard.catala@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFvkBCmfwkQX_yBqv2Wz8ugUGiBDxum8=WvVbfU1TXaNg@mail.gmail.com
Discussion: https://postgr.es/m/CAL54xNZsLwEM1XCk5yW9EqaRzsZYHuWsHQkA2L5MOSKXAwviCQ@mail.gmail.com
createdb() didn't check for collation attributes validity, which has
to be done explicitly on ICU < 54. It also forgot to close the ICU collator
opened during the check which leaks some memory.
To fix both, add a new check_icu_locale() that does all the appropriate
verification and close the ICU collator.
initdb also had some partial check for ICU < 54. To have consistent error
reporting across major ICU versions, and get rid of the need to include ucol.h,
remove the partial check there. The backend will report an error if needed
during the post-boostrap iniitialization phase.
Author: Julien Rouhaud <julien.rouhaud@free.fr>
Discussion: https://www.postgresql.org/message-id/20220319041459.qqqiqh335sga5ezj@jrouhaud
b048326 has added support for SET ACCESS METHOD in ALTER TABLE, but it
has missed a few things for materialized views:
- No documentation for this clause on the ALTER MATERIALIZED VIEW page.
- psql tab completion missing.
- No regression tests.
This commit closes the gap on all the points listed above.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220316133337.5dc9740abfa24c25ec9f67f5@sraoss.co.jp
The clauses SET TABLESPACE and ALL IN TABLESPACE are supported in ALTER
MATERIALIZED VIEW for a long time, and they behave mostly like ALTER
TABLE by reusing the same code paths, but there were zero tests for
them. This commit closes the gap with new tests in tablespace.sql.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220316133337.5dc9740abfa24c25ec9f67f5@sraoss.co.jp
The output of table_to_xmlschema() and allied functions includes
a regex describing valid values for these types ... but the regex
was itself invalid, as it failed to escape a literal "+" sign.
Report and fix by Renan Soares Lopes. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/7f6fabaa-3f8f-49ab-89ca-59fbfe633105@me.com
Otherwise, the database encoding varies depending on the user's
environment, and so the test might fail depending on whether ICU
likes the encoding. In particular, the test fails completely
if the prevailing locale is C.
In commit bf7ca1587, I had the bright idea that we could make the
result of a whole-row Var (that is, foo.*) track any column aliases
that had been applied to the FROM entry the Var refers to. However,
that's not terribly logically consistent, because now the output of
the Var is no longer of the named composite type that the Var claims
to emit. bf7ca1587 tried to handle that by changing the output
tuple values to be labeled with a blessed RECORD type, but that's
really pretty disastrous: we can wind up storing such tuples onto
disk, whereupon they're not readable by other sessions.
The only practical fix I can see is to give up on what bf7ca1587
tried to do, and say that the column names of tuples produced by
a whole-row Var are always those of the underlying named composite
type, query aliases or no. While this introduces some inconsistencies,
it removes others, so it's not that awful in the abstract. What *is*
kind of awful is to make such a behavioral change in a back-patched
bug fix. But corrupt data is worse, so back-patched it will be.
(A workaround available to anyone who's unhappy about this is to
introduce an extra level of sub-SELECT, so that the whole-row Var is
referring to the sub-SELECT's output and not to a named table type.
Then the Var is of type RECORD to begin with and there's no issue.)
Per report from Miles Delahunty. The faulty commit dates to 9.5,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/2950001.1638729947@sss.pgh.pa.us
When publishing changes through a artition root, we should use the row
filter for the top-most ancestor. The relation may be added to multiple
publications, using different ancestors, and 52e4f0cd47 handled this
incorrectly. With c91f71b9dc we find the correct top-most ancestor, but
the code tried to fetch the row filter from all publications, including
those using a different ancestor etc. No row filter can be found for
such publications, which was treated as replicating all rows.
Similarly to c91f71b9dc, this seems to be a rare issue in practice. It
requires multiple publications including the same partitioned relation,
through different ancestors.
Fixed by only passing publications containing the top-most ancestor to
pgoutput_row_filter_init(), so that treating a missing row filter as
replicating all rows is correct.
Report and fix by me, test case by Hou zj. Reviews and improvements by
Amit Kapila.
Author: Tomas Vondra, Hou zj, Amit Kapila
Reviewed-by: Amit Kapila, Hou zj
Discussion: https://postgr.es/m/d26d24dd-2fab-3c48-0162-2b7f84a9c893%40enterprisedb.com
This adds the option to use ICU as the default locale provider for
either the whole cluster or a database. New options for initdb,
createdb, and CREATE DATABASE are used to select this.
Since some (legacy) code still uses the libc locale facilities
directly, we still need to set the libc global locale settings even if
ICU is otherwise selected. So pg_database now has three
locale-related fields: the existing datcollate and datctype, which are
always set, and a new daticulocale, which is only set if ICU is
selected. A similar change is made in pg_collation for consistency,
but in that case, only the libc-related fields or the ICU-related
field is set, never both.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a%402ndquadrant.com
Using this system function with an in-place tablespace (created when
allow_in_place_tablespaces is enabled by specifying an empty string as
location) caused a failure when using readlink(), as the tablespace is,
in this case, not a symbolic link in pg_tblspc/ but a directory.
Rather than getting a failure, the commit changes
pg_tablespace_location() so as a relative path to the data directory is
returned for in-place tablespaces, to make a difference between
tablespaces created when allow_in_place_tablespaces is enabled or not.
Getting a path rather than an empty string that would match the CREATE
TABLESPACE command in this case is more useful for tests that would like
to rely on this function.
While on it, a regression test is added for this case. This is simple
to add in the main regression test suite thanks to regexp_replace() to
mask the part of the tablespace location dependent on its OID.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Thomas Munro
Discussion: https://postgr.es/m/YiG1RleON1WBcLnX@paquier.xyz
Commit 83fd4532a7 allowed publishing of changes via ancestors, for
publications defined with publish_via_partition_root. But the way
the ancestor was determined in get_rel_sync_entry() was incorrect,
simply updating the same variable. So with multiple publications,
replicating different ancestors, the outcome depended on the order
of publications in the list - the value from the last loop was used,
even if it wasn't the top-most ancestor.
This is a probably rare situation, as in most cases publications do
not overlap, so each partition has exactly one candidate ancestor
to replicate as and there's no ambiguity.
Fixed by tracking the "ancestor level" for each publication, and
picking the top-most ancestor. Adds a test case, verifying the
correct ancestor is used for publishing the changes and that this
does not depend on order of publications in the list.
Older releases have another bug in this loop - once all actions are
replicated, the loop is terminated, on the assumption that inspecting
additional publications is unecessary. But that misses the fact that
those additional applications may replicate different ancestors.
Fixed by removal of this break condition. We might still terminate the
loop in some cases (e.g. when replicating all actions and the ancestor
is the partition root).
Backpatch to 13, where publish_via_partition_root was introduced.
Initial report and fix by me, test added by Hou zj. Reviews and
improvements by Amit Kapila.
Author: Tomas Vondra, Hou zj, Amit Kapila
Reviewed-by: Amit Kapila, Hou zj
Discussion: https://postgr.es/m/d26d24dd-2fab-3c48-0162-2b7f84a9c893%40enterprisedb.com
This system function was being triggered once in the main regression
test suite to check its SRF configuration, and more in other test
modules but nothing checked the behavior of the options missing_ok and
include_dot_dirs. This commit adds some tests for both options, to
avoid mistakes if this code is manipulated in the future.
Extracted from a larger patch by the same author, with a few tweaks by
me.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20191227170220.GE12890@telsasoft.com
The upper case versions "OF", "TZH", and "TZM" are already supported,
and all other format codes that are supported in upper case are also
supported in lower case, so we should support these as well for
consistency.
Nitin Jadhav, with a tiny cosmetic change by me. Reviewed by Suraj
Kharage and David Zhang.
Discussion: http://postgr.es/m/CAMm1aWZ-oZyKd75+8D=VJ0sAoSwtdXWLP-MAWD4D8R1Dgandzw@mail.gmail.com
Logical replication apply workers for a subscription can easily get stuck
in an infinite loop of attempting to apply a change, triggering an error
(such as a constraint violation), exiting with the error written to the
subscription server log, and restarting.
To partially remedy the situation, this patch adds a new subscription
option named 'disable_on_error'. To be consistent with old behavior, this
option defaults to false. When true, both the tablesync worker and apply
worker catch any errors thrown and disable the subscription in order to
break the loop. The error is still also written in the logs.
Once the subscription is disabled, users can either manually resolve the
conflict/error or skip the conflicting transaction by using
pg_replication_origin_advance() function. After resolving the conflict,
users need to enable the subscription to allow apply process to proceed.
Author: Osumi Takamichi and Mark Dilger
Reviewed-by: Greg Nancarrow, Vignesh C, Amit Kapila, Wang wei, Tang Haiying, Peter Smith, Masahiko Sawada, Shi Yu
Discussion : https://postgr.es/m/DB35438F-9356-4841-89A0-412709EBD3AB%40enterprisedb.com
Starting in cc50080a82 create_index test fails when run with
synchronous_commit=off. synchronous_commit=off delays when hint bits may be
set. Some plans change depending on the number of all-visible pages, which in
turn can be influenced by the delayed hint bits.
Force synchronous_commit to `on` in test_setup.sql. Not very satisfying, but
there's no obvious alternative.
Reported-By: Aleksander Alekseev <aleksander@timescale.com>
Author: Andres Freund <andres@anarazel.de>
Author: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/CAJ7c6TPJNof1Q+vJsy3QebgbPgXdu2ErPvYkBdhD6_Ckv5EZRg@mail.gmail.com
Commit 8b069ef5d changed this function to look at pg_constraint.conindid
rather than searching pg_depend. That was a good performance improvement,
but it failed to preserve the exact semantics. The old code would only
return an index that was "owned by" (internally dependent on) the
specified constraint, whereas the new code will also return indexes that
are just referenced by foreign key constraints. This confuses ALTER
TABLE, which was implicitly expecting the previous semantics, into
failing with errors like
ERROR: relation 146621 has multiple clustered indexes
or
ERROR: "pk_attbl" is not an index for table "atref"
We can fix this without reverting the performance improvement by adding
a contype check in get_constraint_index(). Another way could be to
make ALTER TABLE check it, but I'm worried that extension code could
also have subtle dependencies on the old semantics.
Tom Lane and Japin Li, per bug #17409 from Holly Roberts.
Back-patch to v14 where the error crept in.
Discussion: https://postgr.es/m/17409-52871dda8b5741cb@postgresql.org
Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180. Developers may see faster failures by setting that
environment variable to some lesser number of seconds. In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180. This change raises the default for some briefer
timeouts. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
pg_regress reported "Unix socket" as the default location whenever
HAVE_UNIX_SOCKETS is defined. However, that's not been accurate
on Windows since 8f3ec75de. Update this logic to match what libpq
actually does now.
This is just cosmetic, but still it's potentially misleading.
Back-patch to v13 where 8f3ec75de came in.
Discussion: https://postgr.es/m/3894060.1646415641@sss.pgh.pa.us
Commit 52e4f0cd47 didn't add tests for pg_dump support, so add a few tests
for it. Additionally, verify that catalogs are updated after few
ALTER PUBLICATION commands that modify row filters by using \d.
Reported-by: Tomas Vondra
Author: Shi yu, based on initial by Tomas Vondra
Reviewed-by: Euler Taveira and Amit Kapila
Discussion: https://postgr.es/m/6bdbd7fc-e81a-9a77-d963-24adeb95f29e@enterprisedb.com
This code seems to have been written on the assumption that
"unsigned long" is 32 bits; or at any rate it ignored the
possibility of conversion overflow. Rewrite, borrowing some
logic from oidin().
Discussion: https://postgr.es/m/3441768.1646343914@sss.pgh.pa.us
It was decided (refer to the Discussion link below) that the stats
collector is not an appropriate place to store the error information of
subscription workers.
This patch changes the pg_stat_subscription_workers view (introduced by
commit 8d74fc96db) so that it stores only statistics counters:
apply_error_count and sync_error_count, and has one entry for
each subscription. The removed error information such as error-XID and
the error message would be stored in another way in the future which is
more reliable and persistent.
After removing these error details, there is no longer any relation
information, so the subscription statistics are now a cluster-wide
statistics.
The patch also changes the view name to pg_stat_subscription_stats since
the word "worker" is an implementation detail that we use one worker for
one tablesync and one apply.
Author: Masahiko Sawada, based on suggestions by Andres Freund
Reviewed-by: Peter Smith, Haiying Tang, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/20220125063131.4cmvsxbz2tdg6g65@alap3.anarazel.de
justify_interval, justify_hours, and justify_days didn't check for
overflow when promoting hours to days or days to months; but that's
possible when the upper field's value is already large. Detect and
report any such overflow.
Also, we can avoid unnecessary overflow in some cases in justify_interval
by pre-justifying the days field. (Thanks to Nathan Bossart for this
idea.)
Joe Koshakow
Discussion: https://postgr.es/m/CAAvxfHeNqsJ2xYFbPUf_8nNQUiJqkag04NW6aBQQ0dbZsxfWHA@mail.gmail.com
See also afdeff1052. Failures after that commit provided a few more hints,
but not yet enough to understand what's going on.
In 019_replslot_limit.pl shut down nodes with fast instead of immediate mode
if we observe the failure mode. That should tell us whether the failures we're
observing are just a timing issue under high load. PGCTLTIMEOUT should prevent
buildfarm animals from hanging endlessly.
Also adds a bit more logging to replication slot drop and ShutdownPostgres().
Discussion: https://postgr.es/m/20220225192941.hqnvefgdzaro6gzg@alap3.anarazel.de
realloc() will return NULL on a failed reallocation, so the destination
pointer must be inspected to avoid null pointer dereference. Further,
assigning the return value to the source pointer leak the allocation in
the case of reallocation failure. Fix by using pg_realloc instead which
has full error handling.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/9FC7E603-9246-4C62-B466-A39CFAF454AE@yesql.se
In the Publisher-Subscriber setup, after performing a DML operation on the
publisher, we need to wait for it to be replayed on the subscriber before
querying the same data on the subscriber. One of the tests missed the wait
step.
As per buildfarm.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv=e9Qd1TSYo8Og6x6Abfz3b9_htwinLp4ENPgV45DACQ@mail.gmail.com
Refactor the recovery tests to not carry a local duplicated copy of
the pump_until function which pumps a process until a defined string
is seen on a stream. This reduces duplication, and is in preparation
for another patch which will also use this functionality.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion https://postgr.es/m/YgynUafCyIu3jIhC@paquier.xyz
I have not been able to reproduce the occasional failures of
019_replslot_limit.pl we are seeing in the buildfarm and not for lack of
trying. The additional logging and increased log level will hopefully help.
Will be reverted once the cause is identified.
Discussion: https://postgr.es/m/20220218231415.c4plkp4i3reqcwip@alap3.anarazel.de
This feature adds row filtering for publication tables. When a publication
is defined or modified, an optional WHERE clause can be specified. Rows
that don't satisfy this WHERE clause will be filtered out. This allows a
set of tables to be partially replicated. The row filter is per table. A
new row filter can be added simply by specifying a WHERE clause after the
table name. The WHERE clause must be enclosed by parentheses.
The row filter WHERE clause for a table added to a publication that
publishes UPDATE and/or DELETE operations must contain only columns that
are covered by REPLICA IDENTITY. The row filter WHERE clause for a table
added to a publication that publishes INSERT can use any column. If the
row filter evaluates to NULL, it is regarded as "false". The WHERE clause
only allows simple expressions that don't have user-defined functions,
user-defined operators, user-defined types, user-defined collations,
non-immutable built-in functions, or references to system columns. These
restrictions could be addressed in the future.
If you choose to do the initial table synchronization, only data that
satisfies the row filters is copied to the subscriber. If the subscription
has several publications in which a table has been published with
different WHERE clauses, rows that satisfy ANY of the expressions will be
copied. If a subscriber is a pre-15 version, the initial table
synchronization won't use row filters even if they are defined in the
publisher.
The row filters are applied before publishing the changes. If the
subscription has several publications in which the same table has been
published with different filters (for the same publish operation), those
expressions get OR'ed together so that rows satisfying any of the
expressions will be replicated.
This means all the other filters become redundant if (a) one of the
publications have no filter at all, (b) one of the publications was
created using FOR ALL TABLES, (c) one of the publications was created
using FOR ALL TABLES IN SCHEMA and the table belongs to that same schema.
If your publication contains a partitioned table, the publication
parameter publish_via_partition_root determines if it uses the partition's
row filter (if the parameter is false, the default) or the root
partitioned table's row filter.
Psql commands \dRp+ and \d <table-name> will display any row filters.
Author: Hou Zhijie, Euler Taveira, Peter Smith, Ajin Cherian
Reviewed-by: Greg Nancarrow, Haiying Tang, Amit Kapila, Tomas Vondra, Dilip Kumar, Vignesh C, Alvaro Herrera, Andres Freund, Wei Wang
Discussion: https://www.postgresql.org/message-id/flat/CAHE3wggb715X%2BmK_DitLXF25B%3DjE6xyNCH4YOwM860JR7HarGQ%40mail.gmail.com
Commit 75d22069e tried to throw a warning for setting a custom GUC whose
prefix belongs to a previously-loaded extension, if there is no such GUC
defined by the extension. But that caused unstable behavior with
parallel workers, because workers don't necessarily load extensions and
GUCs in the same order their leader did. To make that work safely, we
have to completely disallow the case. We now actually remove any such
GUCs at the time of initial extension load, and then throw an error not
just a warning if you try to add one later. While this might create a
compatibility issue for a few people, the improvement in error-detection
capability seems worth it; it's hard to believe that there's any good
use-case for choosing such GUC names.
This also un-reverts 5609cc01c (Rename EmitWarningsOnPlaceholders() to
MarkGUCPrefixReserved()), since that function's old name is now even
more of a misnomer.
Florin Irion and Tom Lane
Discussion: https://postgr.es/m/1902182.1640711215@sss.pgh.pa.us
When cleaning up temporary objects during process exit the cleanup could fail
with:
FATAL: cannot fetch toast data without an active snapshot
The bug is caused by RemoveTempRelationsCallback() not setting up a
snapshot. If an object with toasted catalog data needs to be cleaned up,
init_toast_snapshot() could fail with the above error.
Most of the time however the the problem is masked due to cached catalog
snapshots being returned by GetOldestSnapshot(). But dropping an object can
cause catalog invalidations to be emitted. If no further catalog accesses are
necessary between the invalidation processing and the next toast datum
deletion, the bug becomes visible.
It's easy to miss this bug because it typically happens after clients
disconnect and the FATAL error just ends up in the log.
Luckily temporary table cleanup at the next use of the same temporary schema
or during DISCARD ALL does not have the same problem.
Fix the bug by pushing a snapshot in RemoveTempRelationsCallback(). Also add
isolation tests for temporary object cleanup, including objects with toasted
catalog data.
A future HEAD only commit will add an assertion trying to make this more
visible.
Reported-By: Miles Delahunty
Author: Andres Freund
Discussion: https://postgr.es/m/CAOFAq3BU5Mf2TTvu8D9n_ZOoFAeQswuzk7yziAb7xuw_qyw5gw@mail.gmail.com
Backpatch: 10-
Following migration of Windows buildfarm members running TAP tests to
use of ucrt64 perl for those tests, special processing for msys perl is
no longer necessary and so is removed.
Backpatch to release 10
Discussion: https://postgr.es/m/c65a8781-77ac-ea95-d185-6db291e1baeb@dunslane.net
Double the default setting for hash_mem_multiplier, from 1.0 to 2.0.
This setting makes hash-based executor nodes use twice the usual
work_mem limit.
The PostgreSQL 15 release notes should have a compatibility note about
this change.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzndc_ROk6CY-bC6p9O53q974Y0Ey4WX8jcPbuTZYM4Q3A@mail.gmail.com
After this, the PostgreSQL lexers no longer accept numeric literals
with trailing non-digits, such as 123abc, which would be scanned as
two tokens: 123 and abc. This is undocumented and surprising, and it
might also interfere with some extended numeric literal syntax being
contemplated for the future.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
src/backend/utils/misc/check_guc is a script that cross-checks the
consistency of the GUCs with postgresql.conf.sample, making sure that
its format is in line with what guc.c has. It has never been run
automatically, and has rotten over the years, creating a lot of false
positives as per a report from Justin Pryzby.
d10e41d has introduced a SQL function to publish the most relevant flags
associated to a GUC, with tests added in the main regression test suite
to make sure that we avoid most of the inconsistencies in the GUC
settings, based on recent reports, but there was nothing able to
cross-check postgresql.conf.sample with the contents of guc.c.
This commit adds a TAP test that covers the remaining gap. It emulates
the most relevant checks that check_guc did, so as any format mistakes
are detected in postgresql.conf.sample at development stage, with the
following checks:
- Check that parameters marked as NOT_IN_SAMPLE are not in the sample
file.
- Check that there are no dead entries in postgresql.conf.sample for
parameters not marked as NOT_IN_SAMPLE.
- Check that no parameters are missing from the sample file if listed in
guc.c without NOT_IN_SAMPLE.
The idea of building a list of the GUCs by parsing the sample file comes
from Justin, and he wrote the regex used in the patch to find all the
GUCs (this same formatting rule basically applies for the last 20~ years
or so). In order to test this patch, I have played with manual
modifications of postgresql.conf.sample and guc.c, making sure that we
detect problems with the GUC rules and the sample file format.
The test is located in src/test/modules/test_misc, which is the best
location I could think about for such sanity checks, rather than the
main regression test suite (src/test/regress) to avoid a new type of
dependency with the source tree.
The first attempt of this patch was b0a55f4, where the location of
postgresql.conf.sample was retrieved using pg_config --sharedir. This
has proven to be an issue for distributions that patch pg_config to
enforce the installation paths at some wanted location (like Debian),
that may not exist when the test is run, hence causing a failure.
Instead of that, as per a suggestion from Andres Freund, rely on the
fact that the test is always executed from its directory in the source
tree and use a relative path to find the sample file. This works for
the CI, VPATH builds and on Windows, and tests like the recovery one
added in f47ed79 rely on that already.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/Yf9YGSwPiMu0c7fP@paquier.xyz
The 028_pitr_timelines.pl test would sometimes hang, waiting for a WAL
segment that was just filled up to be archived. It was because the
test used 'pg_stat_archiver.last_archived_wal' to check if a file was
archived, but the order that WAL files are archived when a standby is
promoted is not fully deterministic, and 'last_archived_wal' tracks
the last segment that was archived, not the highest-numbered WAL
segment. Because of that, if the archiver archived segment 3, and then
2, 'last_archived_wal' say 2, and the test query would think that 3
has not been archived yet.
Normally, WAL files are marked ready for archival in order, and the
archiver process will process them in order, so that issue doesn't
arise. We have used the same query on 'last_archived_wal' in a few
other tests with no problem. But when a standby is promoted, things
are a bit chaotic. After promotion, the server will try to archive all
the WAL segments from the old timeline that are in pg_wal, as well as
the history file and any new WAL segments on the new timeline. The
end-of-recovery checkpoint will create the .ready files for all the
WAL files on the old timeline, but at the same time, the new timeline
is opened up for business. A file from the new timeline can therefore
be archived before the files from the old timeline have been marked as
ready for archival.
It turns out that we don't really need to wait for the archival in
this particular test, because the standby server is about to be
stopped, and stopping a server will wait for the end-of-recovery
checkpoint and all WAL archivals to finish, anyway. So we can just
remove it from the test.
Add a note to the docs on 'pg_stat_archiver' view that files can be
archived out of order.
Reviewed-by: Tom Lane
Discussion: https://www.postgresql.org/message-id/3186114.1644960507@sss.pgh.pa.us
checkViewTupleDesc() didn't get the memo that it should verify
same attcollation along with same type/typmod. (A quick scan
did not find other similar oversights.)
Per bug #17404 from Pierre-Aurélien Georges. On another day
I might've back-patched this, but today I'm feeling paranoid
about unnecessary behavioral changes in back branches.
Discussion: https://postgr.es/m/17404-8a4a270ef30a6709@postgresql.org
The test has failed a couple of times on buildfarm member 'hoverfly'. It
gets stuck waiting for the standby to archive 000000020000000000000003
WAL segment. I don't understand why, but with DEBUG1, we will get messages
in the log whenever a segment is archived, which hopefully will give a
clue the next time it happens.
PostgreSQL currently accepts numeric literals with trailing
non-digits, such as 123abc where the abc is treated as the next token.
This may be a bit surprising. This commit adds test cases for this;
subsequent commits intend to change this behavior.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
While I was working on a patch to refactor things around xlog.c, I mixed
up EndOfLogTLI and replayTLI at the end of recovery. As a result, if you
recovered to a point with a lower-numbered timeline in a WAL segment
that has a higher TLI in the filename, the end-of-recovery WAL record
was created with invalid PrevTimeLineId. I noticed that while
self-reviewing, but no tests failed. So add a test to cover that corner
case.
Thanks to Amul Sul who also submitted a test case for the same corner
case, although this patch is different from that.
Reviewed-by: Amul Sul, Michael Paquier
Discussion: https://www.postgresql.org/message-id/52bc9ccd-8591-431b-0086-15d9acf25a3f@iki.fi
Discussion: https://www.postgresql.org/message-id/CAAJ_b94Vjt5cXGza_1MkjLQWciNdEemsmiWuQj0d%3DM7JfjAa1g%40mail.gmail.com
This adds to database objects the same version tracking that collation
objects have. There is a new pg_database column datcollversion that
stores the version, a new function
pg_database_collation_actual_version() to get the version from the
operating system, and a new subcommand ALTER DATABASE ... REFRESH
COLLATION VERSION.
This was not originally added together with pg_collation.collversion,
since originally version tracking was only supported for ICU, and ICU
on a database-level is not currently supported. But we now have
version tracking for glibc (since PG13), FreeBSD (since PG14), and
Windows (since PG13), so this is useful to have now.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f0ff3190-29a3-5b39-a179-fa32eee57db6%40enterprisedb.com
Some of the queries in the "sanity" tests in the regression test suite
(opr_sanity, type_sanity) are very confusing. One main stumbling
block is that for some probably ancient reason many of the older
queries are written with correlation names p1, p2, etc. independent of
the name of the catalog. This one is a good example:
SELECT p1.oid, p1.oprname, p2.oid, p2.proname
FROM pg_operator AS p1, pg_proc AS p2 <-- HERE
WHERE p1.oprcode = p2.oid AND
p1.oprkind = 'l' AND
(p2.pronargs != 1
OR NOT binary_coercible(p2.prorettype, p1.oprresult)
OR NOT binary_coercible(p1.oprright, p2.proargtypes[0])
OR p1.oprleft != 0);
This is better written as
SELECT o1.oid, o1.oprname, p1.oid, p1.proname
FROM pg_operator AS o1, pg_proc AS p1
WHERE o1.oprcode = p1.oid AND
o1.oprkind = 'l' AND
(p1.pronargs != 1
OR NOT binary_coercible(p1.prorettype, o1.oprresult)
OR NOT binary_coercible(o1.oprright, p1.proargtypes[0])
OR o1.oprleft != 0);
This patch cleans up all the queries in this manner.
(As in the above case, I kept the digits like o1 and p1 even in cases
where only one of each letter is used in a query. This is mainly to
keep the style consistent.)
Discussion: https://www.postgresql.org/message-id/flat/c538308b-319c-8784-e250-1284d12d5411%40enterprisedb.com
This reverts commit b0a55f4, to remove for now the TAP test that did the
equivalent of check_guc. The test has been using pg_config --sharedir
to find the location of postgresql.conf.sample. While the buildfarm and
normal build environments rather liked that, this proves to be an issue
for Debian where pg_config is patched to not be relocatable, causing the
test to fail.
Rather than relying on pg_config, we'd better find the sample file based
on its location from the source directory. However, this is also an
issue as a TAP test only offers the build directory as of TESTDIR in the
environment context, so this would fail with VPATH builds. Perhaps the
source path could be provided additionally when running the TAP tests.
Or perhaps we may be able to get away by just switching to a SQL
approach, by using PG_ABS_SRCDIR but this is going to require some extra
loops to get the sample file from the correct path in src/backend/. In
any case, this needs more thoughts, so just revert the test case until
something better is done about this relocation problem.
Reported-by: Christopher Berg
Discussion: https://postgr.es/m/YgYw25OXV5men8Fj@msg.df7cb.de
Redefine a scanned page as any heap page that actually gets pinned by
VACUUM's first pass over the heap, regardless of whether or not the page
was cleanup locked. Although it's fundamentally impossible to prune a
heap page without a cleanup lock (since we cannot safely defragment the
page), we can do just about everything else. The only notable further
exception is freezing tuples, though even that is arguably a consequence
of not being able to prune (not a separate issue).
VACUUM now does as much of the same processing as possible for pages
that could not be cleanup locked. Any failure to do specific required
processing is treated as a special case exception, which will be rare in
practice. We now collect any preexisting LP_DEAD items (left behind by
earlier opportunistic pruning) in the dead_items array for these heap
pages, and count their tuples in the usual way. Steps used to decide if
we'll attempt relation truncation are performed in the usual way for
no-cleanup-lock scanned pages, too.
Although eliminating these special cases is intrinsically useful, it's
even more useful as an enabler of further simplifications. The only
essential difference between aggressive and non-aggressive is that only
aggressive is _guaranteed_ to be able to advance relfrozenxid up to
FreezeLimit. Advancing relfrozenxid is always useful, but before now
non-aggressive VACUUMs threw away the opportunity to do so whenever a
cleanup lock could not be acquired on any page, no matter what the
details were. This was very pessimistic.
It isn't actually necessary to "behave aggressively" to maintain the
ability to advance relfrozenxid when a cleanup lock isn't immediately
available (most of the time). The non-aggressive case will now make
sure that it isn't safe to advance relfrozenxid (without waiting) using
only a share lock. It will usually notice that there are no tuples that
need to be frozen anyway, just like in the aggressive case -- and so it
no longer wastes an opportunity to advance relfrozenxid over nothing.
(The non-aggressive case still won't wait for a cleanup lock when there
really are tuples on the page that need to be frozen, since that really
would amount to "behaving aggressively".)
VACUUM currently has a tendency to set heap pages to all-visible in the
visibility map before it freezes all of the tuples on the page. Only a
subsequent aggressive VACUUM will visit these pages to freeze their
tuples, usually only when the tuple XIDs are much older than the
vacuum_freeze_min_age GUC (FreezeLimit cutoff) is supposed to allow.
And so non-aggressive VACUUMs are still far less likely to be able to
advance relfrozenxid in practice, even with the enhancements from this
commit. This remaining issue will be addressed by future work that
overhauls the criteria for freezing tuples. Once that's in place,
almost every VACUUM operation will be able to advance relfrozenxid in
practice.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wznp=c=Opj8Z7RMR3G=ec3_JfGYMN_YvmCEjoPCHzWbx0g@mail.gmail.com
createplan.c tries to save a runtime projection step by specifying
a scan plan node's output as being exactly the table's columns, or
index's columns in the case of an index-only scan, if there is not a
reason to do otherwise. This logic did not previously pay attention
to whether an index's columns are returnable. That worked, sort of
accidentally, until commit 9a3ddeb51 taught setrefs.c to reject plans
that try to read a non-returnable column. I have no desire to loosen
setrefs.c's new check, so instead adjust use_physical_tlist() to not
try to optimize this way when there are non-returnable column(s).
Per report from Ryan Kelly. Like the previous patch, back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAHUie24ddN+pDNw7fkhNrjrwAX=fXXfGZZEHhRuofV_N_ftaSg@mail.gmail.com
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
The connection strings in the SSL client tests were using the host
set up from Cluster.pm which is a temporary pathname. When SNI is
enabled we pass the host to OpenSSL in order to set the server name
indication ClientHello extension via SSL_set_tlsext_host_name.
OpenSSL doesn't validate the hostname apart from checking the max
length, but LibreSSL checks for RFC 5890 conformance which results
in errors during testing as the pathname from Cluster.pm is not a
valid hostname.
Fix by setting the host explicitly to localhost, as that's closer
to the intent of the test.
Backpatch through 14 where SNI support came in.
Reported-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/17391-304f81bcf724b58b@postgresql.org
Backpatch-through: 14
Some pre-2017 Test::More versions need perfect $Test::Builder::Level
maintenance to find the variable. Buildfarm member snapper reported an
overall failure that the file intended to hide via the TODO construct.
That trouble was reachable in v11 and v10. For later branches, this
serves as defense in depth. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220202055556.GB2745933@rfd.leadboat.com
src/backend/utils/misc/check_guc is a script that cross-checks the
consistency of the GUCs with postgresql.conf.sample, making sure that
its format is in line with what guc.c has. It has never been run
automatically, and has rotten over the years, creating a lot of false
positives as per a report from Justin Pryzby.
d10e41d has introduced a SQL function to publish the most relevant flags
associated to a GUC, with tests added in the main regression test suite
to make sure that we avoid most of the inconsistencies in the GUC
settings, based on recent reports, but there was nothing able to
cross-check postgresql.conf.sample with the contents of guc.c.
This commit adds a TAP test that covers the remaining gap. It emulates
the most relevant checks that check_guc does, so as any format mistakes
are detected in postgresql.conf.sample at development stage, with the
following checks:
- Check that parameters marked as NOT_IN_SAMPLE are not in the sample
file.
- Check that there are no dead entries in postgresql.conf.sample for
parameters not marked as NOT_IN_SAMPLE.
- Check that no parameters are missing from the sample file if listed in
guc.c without NOT_IN_SAMPLE.
The idea of building a list of the GUCs by parsing the sample file comes
from Justin, and he wrote the regex used in the patch to find all the
GUCs (this same formatting rule basically applies for the last 20~ years
or so). In order to test this patch, I have played with manual
modifications of postgresql.conf.sample and guc.c, making sure that we
detect problems with the GUC rules and the sample file format.
The test is located in src/test/modules/test_misc, which is the best
location I could think about for such sanity checks.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/Yf9YGSwPiMu0c7fP@paquier.xyz
Rename create_function_0 to create_function_c, and create_function_3
to create_function_sql, to establish their charters more clearly.
This should also reduce confusion versus our underscore-digit
convention for naming variant expected-files.
I separated this from the previous commit on the premise that keeping
the renaming distinct might make "git blame" tracking easier.
Discussion: https://postgr.es/m/1114748.1640383217@sss.pgh.pa.us
The idea behind this patch is to make it possible to run individual
test scripts without running the entire core test suite. Making all
the scripts completely independent would involve a massive rewrite,
and would probably be worse for coverage of things like concurrent DDL.
So this patch just does what seems practical with limited changes.
The net effect is that any test script can be run after running
limited earlier dependencies:
* all scripts depend on test_setup
* many scripts depend on create_index
* other dependencies are few in number, and are documented in
the parallel_schedule file.
To accomplish this, I chose a small number of commonly-used tables
and moved their creation and filling into test_setup. Later scripts
are expected not to modify these tables' data contents, for fear of
affecting other scripts' results. Also, our former habit of declaring
all C functions in one place is now gone in favor of declaring them
where they're used, if that's just one script, or in test_setup if
necessary.
There's more that could be done to remove some of the remaining
inter-script dependencies, but significantly more-invasive changes
would be needed, and at least for now it doesn't seem worth it.
Discussion: https://postgr.es/m/1114748.1640383217@sss.pgh.pa.us
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
To avoid "ERROR: canceling statement due to conflict with recovery",
as seen on a couple of slower build farm animals, crank
max_standby_streaming_delay right up.
In passing, adjust a configuration option that accidentally used a
non-standard format (not a problem, but needlessly inconsistent).
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK65xVqNgsSPyrr2LEwtfUN%3DGfEuQ868hTC-mu0bFG42A%40mail.gmail.com
Teach canonicalize_path() how to strip all unnecessary uses of "."
and "..", replacing the previous ad-hoc code that got rid of only
some such cases. In particular, we can always remove all such
uses from absolute paths.
The proximate reason to do this is that Windows rejects paths
involving ".." in some cases (in particular, you can't put one in a
symlink), so we ought to be sure we don't use ".." unnecessarily.
Moreover, it seems like good cleanup on general principles.
There is other path-munging code that could be simplified now, but
we'll leave that for followup work.
It is tempting to call this a bug fix and back-patch it. On the other
hand, the misbehavior can only be reached if a highly privileged user
does something dubious, so it's not unreasonable to say "so don't do
that". And this patch could result in unexpected behavioral changes,
in case anybody was expecting uses of ".." to stay put. So at least
for now, just put it in HEAD.
Shenhao Wang, editorialized a bit by me
Discussion: https://postgr.es/m/OSBPR01MB4214FA221FFE046F11F2AD74F2D49@OSBPR01MB4214.jpnprd01.prod.outlook.com
The most meaningful flags are shown, which are the ones useful for the
user and for automating and extending the set of tests supported
currently by check_guc.
This script may actually be removed in the future, but we are not
completely sure yet if and how we want to support the remaining sanity
checks performed there, that are now integrated in the main regression
test suite as of this commit.
Thanks also to Peter Eisentraut and Kyotaro Horiguchi for the
discussion.
Bump catalog version.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211129030833.GJ17618@telsasoft.com
Although select_common_type() has a failure-return convention, an
apparent successful return just provides a type OID that *might* work
as a common supertype; we've not validated that the required casts
actually exist. In the mainstream use-cases that doesn't matter,
because we'll proceed to invoke coerce_to_common_type() on each input,
which will fail appropriately if the proposed common type doesn't
actually work. However, a few callers didn't read the (nonexistent)
fine print, and thought that if they got back a nonzero OID then the
coercions were sure to work.
This affects in particular the recently-added "anycompatible"
polymorphic types; we might think that a function/operator using
such types matches cases it really doesn't. A likely end result
of that is unexpected "ambiguous operator" errors, as for example
in bug #17387 from James Inform. Another, much older, case is that
the parser might try to transform an "x IN (list)" construct to
a ScalarArrayOpExpr even when the list elements don't actually have
a common supertype.
It doesn't seem desirable to add more checking to select_common_type
itself, as that'd just slow down the mainstream use-cases. Instead,
write a separate function verify_common_type that performs the
missing checks, and add a call to that where necessary. Likewise add
verify_common_type_from_oids to go with select_common_type_from_oids.
Back-patch to v13 where the "anycompatible" types came in. (The
symptom complained of in bug #17387 doesn't appear till v14, but
that's just because we didn't get around to converting || to use
anycompatible till then.) In principle the "x IN (list)" fix could
go back all the way, but I'm not currently convinced that it makes
much difference in real-world cases, so I won't bother for now.
Discussion: https://postgr.es/m/17387-5dfe54b988444963@postgresql.org
The invocation of pg_regress in 027_stream_regress.pl didn't specify the
host. It ends up working on most systems because of connection
defaults. However, on windows it makes the test very slow unless
PG_TEST_USE_UNIX_SOCKETS is used.
The problem is that windows resolves "localhost" to ::0, 127.0.0.1, the server
started only listens on 127.0.0.1. On windows refused TCP connections are
internally retried a few times, with back-off between tries, taking at least 2
seconds.
Noticed while investigating a complaint about the test's slow speed by Andrew
Dunstan.
Discussion: https://postgr.es/m/20220127220351.kyp3bdaukfytmoqx@alap3.anarazel.de
Perl instances on some msys toolchains (e.g. UCRT64) have their
configured osname set to 'MSWin32' rather than 'msys'. The test for
the msys2 platform is adjusted accordingly.
Backpatch to release 14.
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
Previously, unless we had to add a NOT NULL constraint to the column,
this command resulted in updating only the index's relcache entry.
That's problematic when replication behavior is being driven off the
existence of a primary key: other sessions (and ours too for that
matter) failed to recalculate their opinion of whether the table can
be replicated. Add a relcache invalidation to fix it.
This has been broken since pg_class.relhaspkey was removed in v11.
Before that, updating the table's relhaspkey value sufficed to cause
a cache flush. Hence, backpatch to v11.
Report and patch by Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716EBE01F112C62F8F9B786947B9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Commits 6c4a8903b et al. had a couple of deficiencies:
* The logic I added to Cluster::start to see if a PID file is present
could be fooled by a stale PID file left over from a previous
postmaster. To fix, if we're not sure whether we expect to find a
running postmaster or not, validate the PID using "kill 0".
* 017_shm.pl has a loop in which it just issues repeated Cluster::start
calls; this will fail if some invocation fails but leaves self->_pid
set. Per buildfarm results, the above fix is not enough to make this
safe: we might have "validated" a PID for a postmaster that exits
immediately after we look. Hence, match each failed start call with
a stop call that will get us back to the self->_pid == undef state.
Add a fail_ok option to Cluster::stop to make this work.
Discussion: https://postgr.es/m/CA+hUKGKV6fOHvfiPt8=dOKzvswjAyLoFoJF1iQXMNpi7+hD1JQ@mail.gmail.com
Since the test requires reproducible behavior from VACUUM, and since
DISABLE_PAGE_SKIPPING doesn't actually disable all forms of page
skipping, let's use a temporary table to avoid contention.
Back-patch to 12, like commit 3414099c.
Discussion: https://postgr.es/m/20220120052404.sonrhq3f3qgplpzj%40alap3.anarazel.de
"pg_ctl start" might start a new postmaster and then return failure
anyway, for example if PGCTLTIMEOUT is exceeded. If there is a
postmaster there, it's still incumbent on us to shut it down at
script end, so check for the PID file even though we are about
to fail.
This has been broken all along, so back-patch to all supported branches.
Discussion: https://postgr.es/m/647439.1642622744@sss.pgh.pa.us
In adverse circumstances, the fsync calls cause this test to run for
quite a long time (multiple minutes) and even suffer timeout failures.
This seems to date from before we made an effort to disable fsync in
all our test cases; there's not a lot of point in using it if there's
not a plan to force an O/S crash during the test.
Discussion: https://postgr.es/m/440239.1642560607@sss.pgh.pa.us
Where we test vacuum_truncate's effects, sometimes this is failing to
truncate as expected on the build farm. That could be explained by page
skipping, so disable it explicitly, with the theory that commit fe246d1c
didn't go far enough.
Back-patch to 12, where the vacuum_truncate tests were added.
Discussion: https://postgr.es/m/CA%2BhUKGLT2UL5_JhmBzUgkdyKfc%3D5J-gJSQJLysMs4rqLUKLAzw%40mail.gmail.com
The tests added by 14d755b000 added a
test case for psql's \set ECHO errors. After the test, it then reset
this to \set ECHO none, which is the default. But the regression
tests are actually run under \set ECHO all (psql -a), so that would
have been the correct way to restore the previous state. Otherwise,
test cases added after that point would not have their input lines
displayed. This was never the intention, so fix this now.
The original coding (from c33869cc3) failed with "more than one row
returned by a subquery used as an expression" if there were unrelated
triggers of the same tgname on parent partitioned tables. (That's
possible because statement-level triggers don't get inherited.) Fix
by applying LIMIT 1 after sorting the candidates by inheritance level.
Also, wrap the subquery in a CASE so that we don't have to execute it at
all when the trigger is visibly non-inherited. Aside from saving some
cycles, this avoids the need for a confusing and undocumented NULLIF().
While here, tweak the format of the emitted query to look a bit
nicer for "psql -E", and add some explanation of this subquery,
because it badly needs it.
Report and patch by Justin Pryzby (with some editing by me).
Back-patch to v13 where the faulty code came in.
Discussion: https://postgr.es/m/20211217154356.GJ17618@telsasoft.com
Currently, database OIDs, relfilenodes, and tablespace OIDs can all
change when a cluster is upgraded using pg_upgrade. It seems better
to preserve them, because (1) it makes troubleshooting pg_upgrade
easier, since you don't have to do a lot of work to match up files
in the old and new clusters, (2) it allows 'rsync' to save bandwidth
when used to re-sync a cluster after an upgrade, and (3) if we ever
encrypt or sign blocks, we would likely want to use a nonce that
depends on these values.
This patch only arranges to preserve relfilenodes and tablespace
OIDs. The task of preserving database OIDs is left for another patch,
since it involves some complexities that don't exist in these cases.
Database OIDs have a similar issue, but there are some tricky points
in that case that do not apply to these cases, so that problem is left
for another patch.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Before, SQL-level boolean constants were represented by a string with
a cast, and internal Boolean values in DDL commands were usually
represented by Integer nodes. This takes the place of both of these
uses, making the intent clearer and having some amount of type safety.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8c1a2e37-c68d-703c-5a83-7a6077f4f997@enterprisedb.com
The need for this was foreseen long ago, but when record_eq
actually became hashable (in commit 01e658fa7), we missed updating
this spot.
Per bug #17363 from Elvis Pranskevichus. Back-patch to v14 where
the faulty commit came in.
Discussion: https://postgr.es/m/17363-f6d42fd0d726be02@postgresql.org
By default, wait_for_catchup() waits for the replication connection
to reach the primary's write LSN. That's fine, but in an apparent
attempt to save one query round-trip, it was coded so that we
executed pg_current_wal_lsn() again during each probe query.
Thus, we presented the standby with a moving target to be reached.
(While the test script itself couldn't be causing the write LSN
to advance while it's blocked in wait_for_catchup(), it's plenty
plausible that background activity such as autovacuum is emitting
more WAL.) That could make the test take longer than necessary,
and potentially it could mask bugs by allowing the standby to process
more WAL than a strict interpretation of the test scenario allows.
So, change wait_for_catchup() to do it "by the book", explicitly
collecting the write LSN to wait for at the outset.
Also, various call sites were instructing wait_for_catchup() to
wait for the standby to reach the primary's insert LSN rather than
its write LSN. This also seems like a bad idea. While in most
test scenarios those are the same, if they are different then the
inserted-but-not-yet-written WAL is not presently available to the
standby. The test isn't doing anything to make it become so, so
again we have the potential for unwanted test delay, perhaps even
a test timeout. (Again, background activity would be needed to
make this more than a hypothetical problem.) Hence, change the
callers where necessary so that the wait target is always the
primary's write LSN.
While at it, simplify callers by making use of wait_for_catchup's
default arguments wherever possible (the preceding change makes
this possible in more places than it was before). And rewrite
wait_for_catchup's documentation a bit.
Patch by me; thanks to Julien Rouhaud for review.
Discussion: https://postgr.es/m/2368336.1641843098@sss.pgh.pa.us
Add pg_statistic_ext_data.stxdinherit flag, so that for each extended
statistics definition we can store two versions of data - one for the
relation alone, one for the whole inheritance tree. This is analogous to
pg_statistic.stainherit, but we failed to include such flag in catalogs
for extended statistics, and we had to work around it (see commits
859b3003de, 36c4bc6e72 and 20b9fa308e).
This changes the relationship between the two catalogs storing extended
statistics objects (pg_statistic_ext and pg_statistic_ext_data). Until
now, there was a simple 1:1 mapping - for each definition there was one
pg_statistic_ext_data row, and this row was inserted while creating the
statistics (and then updated during ANALYZE). With the stxdinherit flag,
we don't know how many rows there will be (child relations may be added
after the statistics object is defined), so there may be up to two rows.
We could make CREATE STATISTICS to always create both rows, but that
seems wasteful - without partitioning we only need stxdinherit=false
rows, and declaratively partitioned tables need only stxdinherit=true.
So we no longer initialize pg_statistic_ext_data in CREATE STATISTICS,
and instead make that a responsibility of ANALYZE. Which is what we do
for regular statistics too.
Patch by me, with extensive improvements and fixes by Justin Pryzby.
Author: Tomas Vondra, Justin Pryzby
Reviewed-by: Tomas Vondra, Justin Pryzby
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since this test schedule is not run by default, it's next door to
unused. Moreover, its test coverage is very thin, and what there is
is just about entirely superseded by the src/test/recovery tests.
Let's drop it instead of carrying obsolete tests.
Discussion: https://postgr.es/m/3911012.1641246643@sss.pgh.pa.us
AFAICS we had no coverage of this point except in the seldom-used,
slated-for-removal standby_schedule test suite. Sequence updates
are enough different from regular table updates that it seems worth
covering them explicitly in src/test/recovery.
Discussion: https://postgr.es/m/999497.1641431891@sss.pgh.pa.us
Commit 859b3003de disabled building of extended stats for inheritance
trees, to prevent updating the same catalog row twice. While that
resolved the issue, it also means there are no extended stats for
declaratively partitioned tables, because there are no data in the
non-leaf relations.
That also means declaratively partitioned tables were not affected by
the issue 859b3003de addressed, which means this is a regression
affecting queries that calculate estimates for the whole inheritance
tree as a whole (which includes e.g. GROUP BY queries).
But because partitioned tables are empty, we can invert the condition
and build statistics only for the case with inheritance, without losing
anything. And we can consider them when calculating estimates.
It may be necessary to run ANALYZE on partitioned tables, to collect
proper statistics. For declarative partitioning there should no prior
statistics, and it might take time before autoanalyze is triggered. For
tables partitioned by inheritance the statistics may include data from
child relations (if built 859b3003de), contradicting the current code.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since commit 859b3003de we only build extended statistics for individual
relations, ignoring the child relations. This resolved the issue with
updating catalog tuple twice, but we still tried to use the statistics
when calculating estimates for the whole inheritance tree. When the
relations contain very distinct data, it may produce bogus estimates.
This is roughly the same issue 427c6b5b9 addressed ~15 years ago, and we
fix it the same way - by ignoring extended statistics when calculating
estimates for the inheritance tree as a whole. We still consider
extended statistics when calculating estimates for individual child
relations, of course.
This may result in plan changes due to different estimates, but if the
old statistics were not describing the inheritance tree particularly
well it's quite likely the new plans is actually better.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Add a new TAP test under src/test/recovery to run the standard
regression tests while a streaming replica replays the WAL. This
provides a basic workout for WAL decoding and redo code, and compares
the replicated result.
Optionally, enable (expensive) wal_consistency_checking if listed in
the env variable PG_TEST_EXTRA.
Reviewed-by: 綱川 貴之 (Takayuki Tsunakawa) <tsunakawa.takay@fujitsu.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
The tablespace tests in the main regression tests have been changed to
use "in-place" tablespaces, so that they work when streamed to a replica
on the same host. Add a new TAP test that exercises tablespaces with
absolute paths, for coverage.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
Remove the machinery from pg_regress that manages the testtablespace
directory. Instead, use "in-place" tablespaces, because they work
correctly when there is a streaming replica running on the same host.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
Commit 7745bc352 intended to ensure that whole-row Vars would be
printed with "::type" decoration in all contexts where plain
"var.*" notation would result in star-expansion, notably in
ROW() and VALUES() constructs. However, it missed the case of
INSERT with a single-row VALUES, as reported by Timur Khanjanov.
Nosing around ruleutils.c, I found a second oversight: the
code for RowCompareExpr generates ROW() notation without benefit
of an actual RowExpr, and naturally it wasn't in sync :-(.
(The code for FieldStore also does this, but we don't expect that
to generate strictly parsable SQL anyway, so I left it alone.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/efaba6f9-4190-56be-8ff2-7a1674f9194f@intrans.baku.az
When building append paths, we've been looking only at startup and total
costs for the paths. When building fractional paths that may eliminate
the cheapest one, because it may be dominated by two separate paths (one
for startup, one for total cost).
This extends generate_orderedappend_paths() to also consider which paths
have lowest fractional cost. Currently we only consider paths matching
pathkeys - in the future this may be improved by also considering paths
that are only partially sorted, with an incremental sort on top.
Original report of an issue by Arne Roland, patch by me (based on a
suggestion by Tom Lane).
Reviewed-by: Arne Roland, Zhihong Yu
Discussion: https://postgr.es/m/e8f9ec90-546d-e948-acce-0525f3e92773%40enterprisedb.com
Discussion: https://postgr.es/m/1581042da8044e71ada2d6e3a51bf7bb%40index.de
Previously pg_log_backend_memory_contexts() could request to
log the memory contexts of backends, but not of auxiliary processes
such as checkpointer. This commit enhances the function so that
it can also send the request to auxiliary processes. It's useful to
look at the memory contexts of those processes for debugging purpose
and better understanding of the memory usage pattern of them.
Note that pg_log_backend_memory_contexts() cannot send the request
to logger or statistics collector. Because this logging request
mechanism is based on shared memory but those processes aren't
connected to that.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACU1nBzpacOK2q=a65S_4+Oaz_rLTsU1Ri0gf7YUmnmhfQ@mail.gmail.com
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
Prevent logical replication workers from performing insert, update,
delete, truncate, or copy commands on tables unless the subscription
owner has permission to do so.
Prevent subscription owners from circumventing row-level security by
forbidding replication into tables with row-level security policies
which the subscription owner is subject to, without regard to whether
the policy would ordinarily allow the INSERT, UPDATE, DELETE or
TRUNCATE which is being replicated. This seems sufficient for now, as
superusers, roles with bypassrls, and target table owners should still
be able to replicate despite RLS policies. We can revisit the
question of applying row-level security policies on a per-row basis if
this restriction proves too severe in practice.
Author: Mark Dilger
Reviewed-by: Jeff Davis, Andrew Dunstan, Ronan Dunklau
Discussion: https://postgr.es/m/9DFC88D3-1300-4DE8-ACBC-4CEF84399A53%40enterprisedb.com
We disallow altering a column datatype within a regular table,
if the table's rowtype is used as a column type elsewhere,
because we lack code to go around and rewrite the other tables.
This restriction should apply to partitioned tables as well, but it
was not checked because ATRewriteTables and ATPrepAlterColumnType
were not on the same page about who should do it for which relkinds.
Per bug #17351 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17351-6db1870f3f4f612a@postgresql.org
The ACL is printed when you add + to the command, similarly to
various other psql backslash commands.
Along the way, move the code for this into describe.c,
where it is a better fit (and can share some code).
Pavel Luzanov, reviewed by Georgios Kokolatos
Discussion: https://postgr.es/m/6d722115-6297-bc53-bb7f-5f150e765299@postgrespro.ru
The code-coverage report says that this test doesn't increase
coverage by one single line, which I now realize is because
I made src/test/modules/test_regex/sql/test_regex_utf8.sql
to cover all the code that this would. So really it's pointless
and we should just drop it.
Up to now this has just sat there as a test you could invoke via
EXTRA_TESTS, which of course nobody does. I'm feeling encouraged
because c2e8bd275 hasn't yet broke anything, so let's try making this
run with a suitable guard condition (similar to collate.linux.utf8).
While user-defined triggers defined on a partitioned table have
a catalog definition for both it and its partitions, internal
triggers used by foreign keys defined on partitioned tables only
have a catalog definition for its partitions. This commit fixes
that so that partitioned tables get the foreign key triggers too,
just like user-defined triggers. Moreover, like user-defined
triggers, partitions' internal triggers will now also have their
tgparentid set appropriately. This is to allow subsequent commit(s)
to make the foreign key related events to be fired in some cases
using the parent table triggers instead of those of partitions'.
This also changes what tgisinternal means in some cases. Currently,
it means either that the trigger is an internal implementation object
of a foreign key constraint, or a "child" trigger on a partition
cloned from the trigger on the parent. This commit changes it to
only mean the former to avoid confusion. As for the latter, it can
be told by tgparentid being nonzero, which is now true both for user-
defined and foreign key's internal triggers.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Arne Roland <A.Roland@index.de>
Discussion: https://postgr.es/m/CA+HiwqG7LQSK+n8Bki8tWv7piHD=PnZro2y6ysU2-28JS6cfgQ@mail.gmail.com
Commit 4ace45677 failed to fix the problem fully, because the
same issue of attempting to fetch a non-returnable index column
can occur when rechecking the indexqual after using a lossy index
operator. Moreover, it broke EXPLAIN for such indexquals (which
indicates a gap in our test cases :-().
Revert the code changes of 4ace45677 in favor of adding a new field
to struct IndexOnlyScan, containing a version of the indexqual that
can be executed against the index-returned tuple without using any
non-returnable columns. (The restrictions imposed by check_index_only
guarantee this is possible, although we may have to recompute indexed
expressions.) Support construction of that during setrefs.c
processing by marking IndexOnlyScan.indextlist entries as resjunk
if they can't be returned, rather than removing them entirely.
(We could alternatively require setrefs.c to look up the IndexOptInfo
again, but abusing resjunk this way seems like a reasonably safe way
to avoid needing to do that.)
This solution isn't great from an API-stability standpoint: if there
are any extensions out there that build IndexOnlyScan structs directly,
they'll be broken in the next minor releases. However, only a very
invasive extension would be likely to do such a thing. There's no
change in the Path representation, so typical planner extensions
shouldn't have a problem.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
Adjust the error texts used for unrecognized/unsupported datetime
units so that there are just two strings to translate, not two
per datatype. Along the way, follow our usual error message style
of not double-quoting type names, and instead making sure that we
say the name is a type. Fix a couple of places in date.c that
were using the wrong one of "unrecognized" and "unsupported".
Nikhil Benesch, with a bit more editing by me
Discussion: https://postgr.es/m/CAPWqQZTURGixmbMH2_Z3ZtWGA0ANjUb9bwtkkxSxSfDeFHuM6Q@mail.gmail.com
If an index has both returnable and non-returnable columns, and one of
the non-returnable columns is an expression using a Var that is in a
returnable column, then a query returning that expression could result
in an index-only scan plan that attempts to read the non-returnable
column, instead of recomputing the expression from the returnable
column as intended.
To fix, redefine the "indextlist" list of an IndexOnlyScan plan node
as containing null Consts in place of any non-returnable columns.
This solves the problem by preventing setrefs.c from falsely matching
to such entries. The executor is happy since it only cares about the
exposed types of the entries, and ruleutils.c doesn't care because a
correct plan won't reference those entries. I considered some other
ways to prevent setrefs.c from doing the wrong thing, but this way
seems good since (a) it allows a very localized fix, (b) it makes
the indextlist structure more compact in many cases, and (c) the
indextlist is now a more faithful representation of what the index AM
will actually produce, viz. nulls for any non-returnable columns.
This is easier to hit since we introduced included columns, but it's
possible to construct failing examples without that, as per the
added regression test. Hence, back-patch to all supported branches.
Per bug #17350 from Louis Jachiet.
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
The reverted commit attempted to fix SQL specification compliance for
the cases which 6aaaa76bb left. This however broke existing behavior
which takes precedence over spec compliance so revert. The introduced
tests are left after the revert since the codepath isn't well covered.
Per bug report 17346. Backpatch down to 14 where it was introduced.
Reported-by: Andrew Bille <andrewbille@gmail.com>
Discussion: https://postgr.es/m/17346-f72b28bd1a341060@postgresql.org
This seems like a clearer name for what it does now.
Provide a compatibility macro so that extensions don't have to convert
to the new name right away.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
Commit 75d22069e made SET print a warning if you tried to set an
unrecognized parameter within namespace previously reserved by an
extension. It seems better for that to be an outright error though,
for the same reason that we don't let you set unrecognized unqualified
parameter names. In any case, the preceding implementation was
inefficient and erroneous. Perform the check in a more appropriate
spot, and be more careful about prefix-match cases.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
Extensions that define any custom GUCs should call
EmitWarningsOnPlaceholders after doing so, to help catch misspellings.
Many of our contrib modules hadn't gotten the memo on that, though.
Also add such calls to src/test/modules extensions that have GUCs.
While these aren't really user-facing, they should illustrate good
practice not faulty practice.
Shinya Kato
Discussion: https://postgr.es/m/524fa2c0a34f34b68fbfa90d0760d515@oss.nttdata.com
"git mv" all the input/*.source and output/*.source files into
the corresponding sql/ and expected/ directories. Then remove
the pg_regress and Makefile infrastructure associated with
dynamic translation.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
pg_regress has long had provisions for dynamically substituting path
names into regression test scripts and result files, but use of that
feature has always been a serious pain in the neck, mainly because
updating the result files requires tedious manual editing. Let's
get rid of that in favor of passing down the paths in environment
variables.
In addition to being easier to maintain, this way is capable of
dealing with path names that require escaping at runtime, for example
paths containing single-quote marks. (There are other stumbling
blocks in the way of actually building in a path that looks like
that, but removing this one seems like a good thing to do.) The key
coding rule that makes that possible is to concatenate pieces of a
dynamically-variable string using psql's \set command, and then use
the :'variable' notation to quote and escape the string for the next
level of interpretation.
In hopes of making this change more transparent to "git blame",
I've split it into two steps. This commit adds the necessary
pg_regress.c support and changes all the *.source files in-place
so that they no longer require any dynamic translation. The next
commit will just "git mv" them into the regular sql/ and expected/
directories.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
\getenv fetches the value of an environment variable into a psql
variable. This is the inverse of the \setenv command that was added
over ten years ago. We'd not seen a compelling use-case for \getenv
at the time, but upcoming regression test refactoring provides a
sufficient reason to add it now.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
Our previous validator used a traditional algorithm that performed
comparison and branching one byte at a time. It's useful in that
we always know exactly how many bytes we have validated, but that
precision comes at a cost. Input validation can show up prominently
in profiles of COPY FROM, and future improvements to COPY FROM such
as parallelism or faster line parsing will put more pressure on input
validation. Hence, add fast paths for both ASCII and multibyte UTF-8:
Use bitwise operations to check 16 bytes at a time for ASCII. If
that fails, use a "shift-based" DFA on those bytes to handle the
general case, including multibyte. These paths are relatively free
of branches and thus robust against all kinds of byte patterns. With
these algorithms, UTF-8 validation is several times faster, depending
on platform and the input byte distribution.
The previous coding in pg_utf8_verifystr() is retained for short
strings and for when the fast path returns an error.
Review, performance testing, and additional hacking by: Heikki
Linakangas, Vladimir Sitnikov, Amit Khandekar, Thomas Munro, and
Greg Stark
Discussion:
https://www.postgresql.org/message-id/CAFBsxsEV_SzH%2BOLyCiyon%3DiwggSyMh_eF6A3LU2tiWf3Cy2ZQg%40mail.gmail.com
In the wake of commit b073c3ccd, it's necessary to grant create
permissions on the public schema to PUBLIC to get many of the
core regression test scripts to pass. That commit did so via the
quick-n-dirty expedient of adding the GRANT to the tablespace test,
which runs first. This is problematic for single-machine
replication testing, though. The least painful way to run the
regression tests on such a setup is to skip the tablespace test,
and that no longer works.
To fix, let's invent a separate "test_setup" script to run first,
and put the GRANT there. Revert b073c3ccd's changes to
the tablespace.source files.
In the future it might be good to try to reduce coupling between
the various test scripts by having test_setup create widely-used
objects, with the goal that most of the scripts could run after
having run only test_setup. That's going to take some effort,
so this commit just addresses my immediate pain point.
Discussion: https://postgr.es/m/1363170.1639763559@sss.pgh.pa.us
Fix the code changed by commit 5c056b0c2 so that we always generate
RelabelType, not something else, for a cast to unspecified typmod.
Otherwise planner optimizations might not happen.
It appears we missed this point because the previous experiments were
done on type numeric: the parser undesirably generates a call on the
numeric() length-coercion function, but then numeric_support()
optimizes that down to a RelabelType, so that everything seems fine.
It misbehaves for types that have a non-optimized length coercion
function, such as bpchar.
Per report from John Naylor. Back-patch to all supported branches,
as the previous patch eventually was. Unfortunately, that no longer
includes 9.6 ... we really shouldn't put this type of change into a
nearly-EOL branch.
Discussion: https://postgr.es/m/CAFBsxsEfbFHEkouc+FSj+3K1sHipLPbEC67L0SAe-9-da8QtYg@mail.gmail.com
Nobody has filled in these stubs for upwards of twenty years,
so it's time to drop the idea that they might get implemented
any day now. The associated pg_operator and pg_proc entries
are just confusing wastes of space.
Per complaint from Anton Voloshin.
Discussion: https://postgr.es/m/3426566.1638832718@sss.pgh.pa.us
geo_ops.c contains half a dozen functions that are just stubs throwing
ERRCODE_FEATURE_NOT_SUPPORTED. Since it's been like that for more
than twenty years, there's clearly not a lot of interest in filling in
the stubs. However, I'm uncomfortable with deleting poly_distance(),
since every other geometric type supports a distance-to-another-object-
of-the-same-type function. We can easily add this capability by
cribbing from poly_overlap() and path_distance().
It's possible that the (existing) test case for this will show some
numeric instability, but hopefully the buildfarm will expose it if so.
In passing, improve the documentation to try to explain why polygons
are distinct from closed paths in the first place.
Discussion: https://postgr.es/m/3426566.1638832718@sss.pgh.pa.us
When writing / debugging an isolation test it sometimes is useful to see which
session holds what lock etc. To make it easier, both as part of spec files and
interactively, append the session name to application_name. Since b1907d688
application_name already contains the test name, this appends the session's
name to that.
insert-conflict-specconflict did something like this manually, which can now
be removed.
As we have done lately with other test infrastructure improvements, backpatch
this change, to make it easier to backpatch tests.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Michael Paquier <michael@paquier.xyz>
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20211211012052.2blmzcmxnxqawd2z@alap3.anarazel.de
Backpatch: 10-, to make backpatching of tests easier.
We need to replace windows-style \ path separators with / when putting socket
directories either in postgresql.conf or libpq connection strings, otherwise
they are interpreted as escapes.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/4da250a5-4222-1522-f14d-8a72bcf7e38e@enterprisedb.com
The multirange_get_range() function fails when two boundaries of the same
range have different alignments. Fix that by adding proper pointer alignment.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/17300-dced2d01ddeb1f2f%40postgresql.org
Backpatch-through: 14
The test added by 5753d4ee32 relies on statistics collector, and so it
may occasionally fail when the UDP packet gets lost. Some machines may
be susceptible to this, probably depending on load etc.
Move the test to stats.sql, which is known to already have this issue
and people know to ignore it.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
We publish the child table's data twice for a publication that has both
child and parent tables and is published with publish_via_partition_root
as true. This happens because subscribers will initiate synchronization
using both parent and child tables, since it gets both as separate tables
in the initial table list.
Ensure that pg_publication_tables returns only parent tables in such
cases.
Author: Hou Zhijie
Reviewed-by: Greg Nancarrow, Amit Langote, Vignesh C, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
Extend the foreign key ON DELETE actions SET NULL and SET DEFAULT by
allowing the specification of a column list, like
CREATE TABLE posts (
...
FOREIGN KEY (tenant_id, author_id) REFERENCES users ON DELETE SET NULL (author_id)
);
If a column list is specified, only those columns are set to
null/default, instead of all the columns in the foreign-key
constraint.
This is useful for multitenant or sharded schemas, where the tenant or
shard ID is included in the primary key of all tables but shouldn't be
set to null.
Author: Paul Martinez <paulmtz@google.com>
Discussion: https://www.postgresql.org/message-id/flat/CACqFVBZQyMYJV=njbSMxf+rbDHpx=W=B7AEaMKn8dWn9OZJY7w@mail.gmail.com
We show duplicate values for child tables in publications that have both
child and parent tables and are published with publish_via_partition_root
as false which is not what the user would expect.
We decided not to backpatch this as there is no user complaint about this
and it doesn't seem to be a critical issue.
Author: Hou Zhijie
Reviewed-by: Bharath Rupireddy, Amit Langote, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB5716E97F00732B52DC2BBC2594989@OS0PR01MB5716.jpnprd01.prod.outlook.com
This simplifies the code so as it is not necessary anymore for the
caller of parse_subscription_options() to zero SubOpts, holding a
bitmaps of the provided options as well as the default/parsed option
values. This also simplifies some checks related to the options
supported by a command when checking for incompatibilities.
While on it, the errors generated for unsupported combinations with
"slot_name = NONE" are reordered. This may generate a different errors
compared to the previous major versions, but users have to go through
all those errors to get a correct command in this case when using
incorrect values for options "enabled" and "create\slot", so at the end
the resulting command would remain the same.
Author: Peter Smith
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/CAHut+PtXHfLgLHDDJ8ZN5f5Be_37mJoxpEsRg8LNmm4XCr06Rw@mail.gmail.com
REINDEX CONCURRENTLY run on a toast index or a toast relation could
corrupt the target indexes rebuilt, as a backend running in parallel
that manipulates toast values would directly release the lock on the
toast relation when its local operation is done, rather than releasing
the lock once the transaction that manipulated the toast values
committed.
The fix done here is simple: we now hold a ROW EXCLUSIVE lock on the
toast relation when saving or deleting a toast value until the
transaction working on them is committed, so as a concurrent reindex
happening in parallel would be able to wait for any activity and see any
new rows inserted (or deleted).
An isolation test is added to check after the case fixed here, which is
a bit fancy by design as it relies on allow_system_table_mods to rename
the toast table and its index to fixed names. This way, it is possible
to reindex them directly without any dependency on the OID of the
underlying relation. Note that this could not use a DO block either, as
REINDEX CONCURRENTLY cannot be run in a transaction block. The test is
backpatched down to 13, where it is possible, thanks to c4a7a39, to use
allow_system_table_mods in a test suite.
Reported-by: Alexey Ermakov
Analyzed-by: Andres Freund, Noah Misch
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/17268-d2fb426e0895abd4@postgresql.org
Backpatch-through: 12
Perl's hex() function complains if its argument contains trailing white
space (or in fact anything other than hex digits), so remove the
offending text.
The temporary path generated in commit c113d8ad5 cannot be passed as-is in
the connection string on Windows since the path delimiting backslashes will
be treated as escape characters. Fix by converting backslash to slash as in
similar path usecases in other tests.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211202195130.e7pprpsx4ell22sp@alap3.anarazel.de
psql's lexer has historically deleted dash-dash (single-line) comments
from what's collected and sent to the server. This is inconsistent
with what it does for slash-star comments, and people have complained
before that they wish such comments would be captured in the server log.
Undoing the decision completely seems like too big a behavioral change,
however. In particular, comments on lines preceding the start of a
query are generally not thought of as being part of that query.
What we can do to improve the situation is to capture comments that
are clearly *within* a query, that is after the first non-whitespace,
non-comment token but before the query's ending semicolon or backslash
command. This is a nearly trivial code change, and it affects only a
few regression test results.
(It is tempting to try to apply the same rule to slash-star comments.
But it's hard to see how to do that without getting strange history
behavior for comments that cross lines, especially if the user then
starts a new query on the same line as the star-slash. In view of
the lack of complaints, let's leave that case alone.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
An extension can already de facto reserve a GUC prefix using
EmitWarningsOnPlaceholders(). But this was only checked against
settings that exist at the time the extension is loaded (or the
extension chooses to call this). No diagnostic is given when a SET
command later uses a nonexisting setting with a custom prefix.
With this change, EmitWarningsOnPlaceholders() saves the prefixes it
reserves in a list, and SET checks when it finds a "placeholder"
setting whether it belongs to a reserved prefix and issues a warning
in that case.
Add a regression test that checks the patch using the "plpgsql"
registered prefix.
Author: Florin Irion <florin.irion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HEvJDhWuuTpGTJT9Tgbdzm4QS4EzPAwDBScWK18H2Q=FVJFw@mail.gmail.com
Commit c113d8ad50 moved the copying of certificates into a temporary path
for the duration of the tests, instead of using the source tree. This broke
the tests on msys as the absolute path wasn't adapted for the msys platform.
Ensure to convert the path with perl2host before copying and passing in the
connection string.
While there also make certificate copying error handling uniform across all
the test suites.
Discussion: https://postgr.es/m/YacT3tm97xziSUFw@paquier.xyz
The tests didn't considered that an error unrelated to apply changes, e.g.
"replication origin with OID %d is already active ...", could occur on the
table sync worker before starting to copy changes.
To make the test robust we instead need to check the expected error and
the source of error which will be either tablesync or apply worker.
In passing remove the harmless option "streaming = off" from Create
Subscription command as that is anyway the default.
Per buildfarm member sidewinder.
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Discussion: https://postgr.es/m/E1mrtvV-0002Gz-73@gemulon.postgresql.org
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed only by BRIN indexes. There are no index
pointers to individual tuples in BRIN, and the page range summary will
be updated anyway as it relies on visibility info.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
Patch by Josef Simanek, various fixes and improvements by me.
Author: Josef Simanek
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
The SSL and SCRAM TAP test suites both use temporary copies of the
supplied test keys in order to ensure correct permissions. These
were however copied inside the tree using temporary filenames rather
than a true temporary folder. Fix by using tmp_check supplied by
PostgreSQL::Test::Utils. Spotted by Tom Lane during review of the
nearby sslinfo TAP test patch.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/599244.1638041239@sss.pgh.pa.us
This adds rudimentary coverage of the sslinfo extension into the SSL
test harness. The output is validated by comparing with pg_stat_ssl
to provide some level of test stability should the underlying certs
be slightly altered. A new cert is added to provide an extension to
test against.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/E23F9811-0C77-45DA-912F-D809AB140741@yesql.se
In order to be able to test extensions with SSL connections, allow
configure_test_server_for_ssl to create any extensions passed as
an array. Each extension is created in all the test databases.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/E23F9811-0C77-45DA-912F-D809AB140741@yesql.se
This commit adds a new system view pg_stat_subscription_workers, that
shows information about any errors which occur during the application of
logical replication changes as well as during performing initial table
synchronization. The subscription statistics entries are removed when the
corresponding subscription is removed.
It also adds an SQL function pg_stat_reset_subscription_worker() to reset
single subscription errors.
The contents of this view can be used by an upcoming patch that skips the
particular transaction that conflicts with the existing data on the
subscriber.
This view can be extended in the future to track other xact related
statistics like the number of xacts committed/aborted for subscription
workers.
Author: Masahiko Sawada
Reviewed-by: Greg Nancarrow, Hou Zhijie, Tang Haiying, Vignesh C, Dilip Kumar, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
Commit 6aaaa76bb added support for the GRANTED BY clause in GRANT and
REVOKE statements, but missed adding support for checking the role in
the REVOKE ROLE case. Fix by checking that the parsed role matches the
CURRENT_ROLE/CURRENT_USER requirement, and also add some tests for it.
Backpatch to v14 where GRANTED BY support was introduced.
Discussion: https://postgr.es/m/B7F6699A-A984-4943-B9BF-CEB84C003527@yesql.se
Backpatch-through: 14
Replica identities that depend directly on an index rely on a set of
properties, one of them being that all the columns defined in this index
have to be marked as NOT NULL. There was a hole in the logic with ALTER
TABLE DROP NOT NULL, where it was possible to remove the NOT NULL
property of a column part of an index used as replica identity, so block
it to avoid problems with logical decoding down the road.
The same check was already done columns part of a primary key, so the
fix is straight-forward.
Author: Haiying Tang, Hou Zhijie
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB6113338C102BEE8B2FFC5BD9FB619@OS0PR01MB6113.jpnprd01.prod.outlook.com
Backpatch-through: 10
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Memoize would always use the hash equality operator for the cache key
types to determine if the current set of parameters were the same as some
previously cached set. Certain types such as floating points where -0.0
and +0.0 differ in their binary representation but are classed as equal by
the hash equality operator may cause problems as unless the join uses the
same operator it's possible that whichever join operator is being used
would be able to distinguish the two values. In which case we may
accidentally return in the incorrect rows out of the cache.
To fix this here we add a binary mode to Memoize to allow it to the
current set of parameters to previously cached values by comparing
bit-by-bit rather than logically using the hash equality operator. This
binary mode is always used for LATERAL joins and it's used for normal
joins when any of the join operators are not hashable.
Reported-by: Tom Lane
Author: David Rowley
Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us
Backpatch-through: 14, where Memoize was added
This commit adds a set of functions able to look at the contents of
various paths related to replication slots:
- pg_ls_logicalsnapdir, for pg_logical/snapshots/
- pg_ls_logicalmapdir, for pg_logical/mappings/
- pg_ls_replslotdir, for pg_replslot/<slot_name>/
These are intended to be used by monitoring tools. Unlike pg_ls_dir(),
execution permission can be granted to non-superusers. Roles members of
pg_monitor gain have access to those functions.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CALj2ACWsfizZjMN6bzzdxOk1ADQQeSw8HhEjhmVXn_Pu+7VzLw@mail.gmail.com
Oversights in commit 405f32fc4.
Also, add a tip (discovered the hard way) about getting Test::More
0.98 to pass its regression tests on recent Linux platforms.
Commit ac9099fc1 rearranged the logic in spgGetCache() that determines
the index's attType (nominal input data type) and leafType (actual
type stored in leaf index tuples). Turns out this broke things for
the case where (a) the actual input data type is different from the
nominal type, (b) the opclass's config function leaves leafType
defaulted, and (c) the opclass has no "compress" function. (b) caused
us to assign the actual input data type as leafType, and then since
that's not attType, we complained that a "compress" function is
required. For non-polymorphic opclasses, condition (a) arises in
binary-compatible cases, such as using SP-GiST text_ops for a varchar
column, or using any opclass on a domain over its nominal input type.
To fix, use attType for leafType when the index's declared column type
is different from but binary-compatible with attType. Do this only in
the defaulted-leafType case, to avoid overriding any explicit
selection made by the opclass.
Per bug #17294 from Ilya Anfimov. Back-patch to v14.
Discussion: https://postgr.es/m/17294-8f6c7962ce877edc@postgresql.org
This commit adds to the main regression test suite a table with all
the in-core data types (some exceptions apply). This table is not
dropped, so as pg_upgrade would be able to check the binary
compatibility of the types tracked in the table. If a new type is added
in core, this part of the tests would need a refresh but the tests are
designed to fail if that were to happen.
As this is useful for upgrades and that these rely on the objects
created in the regression test suite of the old version upgraded from,
a backpatch down to 12 is done, which is the last point where a binary
incompatible change has been done (7c15cef). This will hopefully be
enough to find out if something gets broken during the development of a
new version of Postgres, so as it is possible to take actions in
pg_upgrade itself in this case (like 0ccfc28 for sql_identifier).
An area that is not covered yet is related to external modules, which
may create their own types. The testing infrastructure of pg_upgrade is
not integrated yet with the external modules stored in core
(src/test/modules/ or contrib/, all use the same database name for their
tests so there would be an overlap). This could be improved in the
future.
Author: Justin Pryzby
Reviewed-by: Jacob Champion, Peter Eisentraut, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
This fills in some gaps in planner support for starts_with() and
the equivalent ^@ operator:
* A condition such as "textcol ^@ constant" can now use a regular
btree index, not only an SP-GiST index, so long as the index's
collation is C. (This works just like "textcol LIKE 'foo%'".)
* "starts_with(textcol, constant)" can be optimized the same as
"textcol ^@ constant".
* Fixed-prefix LIKE and regex patterns are now more like starts_with()
in another way: if you apply one to an SPGiST-indexed column, you'll
get an index condition using ^@ rather than two index conditions with
>= and <.
Per a complaint from Shay Rojansky. Patch by me; thanks to
Nathan Bossart for review.
Discussion: https://postgr.es/m/232599.1633800229@sss.pgh.pa.us
If a SQL-standard function body contains an INSERT ... SELECT statement,
any function parameters referenced within the SELECT were always printed
in $N style, rather than using the parameter name if any. While not
strictly incorrect, this wasn't the intention, and it's inconsistent
with the way that such parameters would be printed in any other kind
of statement.
The cause is that the recursion to get_query_def from
get_insert_query_def neglected to pass down the context->namespaces
list, passing constant NIL instead. This is a very ancient oversight,
but AFAICT it had no visible consequences before commit e717a9a18
added an outermost namespace with function parameters. We don't allow
INSERT ... SELECT as a sub-query, except in a top-level WITH clause,
where it couldn't contain any outer references that might need to access
upper namespaces. So although that's arguably a bug, I don't see any
point in changing it before v14.
In passing, harden the code added to get_parameter by e717a9a18 so that
it won't crash if a PARAM_EXTERN Param appears in an unexpected place.
Per report from Erki Eessaar. Code fix by me, regression test case
by Masahiko Sawada.
Discussion: https://postgr.es/m/AM9PR01MB8268347BED344848555167FAFE949@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
Commit 81d5995b4b introduced more fine-grained errormessages for
incorrect relkinds for publication, while unlogged and temporary
tables were reported with using the same message. This provides
separate error messages for these types of relpersistence.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Jeevan Ladhe <jeevan.ladhe@enterprisedb.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CALj2ACW9S=AswyQHjtO6WMcsergMkCBTtzXGrM8DX26DzfeTLQ@mail.gmail.com
When changing REPLICA IDENTITY INDEX to another one, the target table's
relcache was not being invalidated. This leads to skipping update/delete
operations during apply on the subscriber side as the columns required to
search corresponding rows won't get logged.
Author: Tang Haiying, Hou Zhijie
Reviewed-by: Euler Taveira, Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB61133CA11630DAE45BC6AD95FB939@OS0PR01MB6113.jpnprd01.prod.outlook.com
Commit 90627cf98 added support for retaining the data directory even on
successful tests, but failed to document the environment variable which
controls retention. This adds a small note to the TAP test README about
PG_TEST_NOCLEAN which when set skips removing the data directories from
successful tests.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2B02C1B3-3F41-4E14-92B9-005D83623A0B@yesql.se
pg_stat_get_slru() in pgstatfuncs.c would point to one element after the
end of the array PgStat_SLRUStats when finishing to scan its entries.
This had no direct consequences as no data from the extra memory area
was read, but static analyzers would rightfully complain here. So let's
be clean.
While on it, this adds one regression test in the area reserved for
system views.
Reported-by: Alexander Kozhemyakin, via AddressSanitizer
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17280-37da556e86032070@postgresql.org
Backpatch-through: 13
PostgreSQL 13 and newer versions are directly impacted by that through
the SQL function normalize(), which would cause a call of this function
to write one byte past its allocation if using in input an empty
string after recomposing the string with NFC and NFKC. Older versions
(v10~v12) are not directly affected by this problem as the only code
path using normalization is SASLprep in SCRAM authentication that
forbids the case of an empty string, but let's make the code more robust
anyway there so as any out-of-core callers of this function are covered.
The solution chosen to fix this issue is simple, with the addition of a
fast-exit path if the decomposed string is found as empty. This would
only happen for an empty string as at its lowest level a codepoint would
be decomposed as itself if it has no entry in the decomposition table or
if it has a decomposition size of 0.
Some tests are added to cover this issue in v13~. Note that an empty
string has always been considered as normalized (grammar "IS NF[K]{C,D}
NORMALIZED", through the SQL function is_normalized()) for all the
operations allowed (NFC, NFD, NFKC and NFKD) since this feature has been
introduced as of 2991ac5. This behavior is unchanged but some tests are
added in v13~ to check after that.
I have also checked "make normalization-check" in src/common/unicode/,
while on it (works in 13~, and breaks in older stable branches
independently of this commit).
The release notes should just mention this commit for v13~.
Reported-by: Matthijs van der Vleuten
Discussion: https://postgr.es/m/17277-0c527a373794e802@postgresql.org
Backpatch-through: 10
We've seen intermittent failures in this test on slower buildfarm
machines, which I think can be explained by assuming that autovacuum
emitted some additional WAL. Disable autovacuum to stabilize it.
In passing, use stringwise not numeric comparison to compare
WAL file names. Doesn't matter at present, but they are
hex strings not decimal ...
Discussion: https://postgr.es/m/1372189.1636499287@sss.pgh.pa.us
Commit 5a2832465f introduced some enums to represent all tables in schema
publications and used REL in their names. Use TABLE instead of REL in
those enums to avoid confusion with other objects like SEQUENCES that can
be part of a publication in the future.
In the passing, (a) Change one of the newly introduced error messages to
make it consistent for Create and Alter commands, (b) add missing alias in
one of the SQL Statements that is used to print publications associated
with the table.
Reported-by: Tomas Vondra, Peter Smith
Author: Vignesh C
Reviewed-by: Hou Zhijie, Peter Smith
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ%40mail.gmail.com
The tsvector data type has always forbidden lexemes to be empty.
However, array_to_tsvector() didn't get that memo, and would
allow an empty-string array element to become an empty lexeme.
This could result in dump/restore failures later, not to mention
whatever semantic issues might be behind the original prohibition.
However, other functions that take a plain text input directly as
a lexeme value do not need a similar restriction, because they only
match the string against existing tsvector entries. In particular
it'd be a bad idea to make ts_delete() reject empty strings, since
that is the most convenient way to clean up any bad data that might
have gotten into a tsvector column via this bug.
Reflecting on that, let's also remove the prohibition against NULL
array elements in tsvector_delete_arr and tsvector_setweight_by_filter.
It seems more consistent to ignore them, as an empty-string element
would be ignored.
There's a case for back-patching this, since it's clearly a bug fix.
On balance though, it doesn't seem like something to change in a
minor release.
Jean-Christophe Arnu
Discussion: https://postgr.es/m/CAHZmTm1YVndPgUVRoag2WL0w900XcoiivDDj-gTTYBsG25c65A@mail.gmail.com
When calculating distance between float4/float8 values, we need to be a
bit more careful about NaN values in order not to trigger assert. We
consider NaN values to be equal (distace 0.0) and in infinite distance
from all other values.
On builds without asserts, this issue is mostly harmless - the ranges
may be merged in less efficient order, but the index is still correct.
Per report from Andreas Seltenreich. Backpatch to 14, where this new
BRIN opclass was introduced.
Reported-by: Andreas Seltenreich
Discussion: https://postgr.es/m/87r1bw9ukm.fsf@credativ.de
If lo_export() fails to open the target file or to write to it, it leaks
the created LargeObjectDesc and its snapshot in the top-transaction
context and resource owner. That's pretty harmless, it's a small leak
after all, but it gives the user a "Snapshot reference leak" warning.
Fix by using a short-lived memory context and no resource owner for
transient LargeObjectDescs that are opened and closed within one function
call. The leak is easiest to reproduce with lo_export() on a directory
that doesn't exist, but in principle the other lo_* functions could also
fail.
Backpatch to all supported versions.
Reported-by: Andrew B
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/32bf767a-2d65-71c4-f170-122f416bab7e@iki.fi
Commit b4af70cb, which simplified state managed by VACUUM, performed
refactoring of parallel VACUUM in passing. Confusion about the exact
details of the tasks that the leader process is responsible for led to
code that made it possible for parallel VACUUM to miss a subset of the
table's indexes entirely. Specifically, indexes that fell under the
min_parallel_index_scan_size size cutoff were missed. These indexes are
supposed to be vacuumed by the leader (alongside any parallel unsafe
indexes), but weren't vacuumed at all. Affected indexes could easily
end up with duplicate heap TIDs, once heap TIDs were recycled for new
heap tuples. This had generic symptoms that might be seen with almost
any index corruption involving structural inconsistencies between an
index and its table.
To fix, make sure that the parallel VACUUM leader process performs any
required index vacuuming for indexes that happen to be below the size
cutoff. Also document the design of parallel VACUUM with these
below-size-cutoff indexes.
It's unclear how many users might be affected by this bug. There had to
be at least three indexes on the table to hit the bug: a smaller index,
plus at least two additional indexes that themselves exceed the size
cutoff. Cases with just one additional index would not run into
trouble, since the parallel VACUUM cost model requires two
larger-than-cutoff indexes on the table to apply any parallel
processing. Note also that autovacuum was not affected, since it never
uses parallel processing.
Test case based on tests from a larger patch to test parallel VACUUM by
Masahiko Sawada.
Many thanks to Kamigishi Rei for her invaluable help with tracking this
problem down.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Kamigishi Rei <iijima.yun@koumakan.jp>
Reported-By: Andrew Gierth <andrew@tao11.riddles.org.uk>
Diagnosed-By: Andres Freund <andres@anarazel.de>
Bug: #17245
Discussion: https://postgr.es/m/17245-ddf06aaf85735f36@postgresql.org
Discussion: https://postgr.es/m/20211030023740.qbnsl2xaoh2grq3d@alap3.anarazel.de
Backpatch: 14-, where the refactoring commit appears.
The opclass parameter Datums from the old index are fetched in the same
way as for predicates and expressions, by grabbing them directly from
the system catalogs. They are then copied into the new IndexInfo that
will be used for the creation of the new copy.
This caused the new index to be rebuilt with default parameters rather
than the ones pre-defined by a user. The only way to get back a new
index with correct opclass parameters would be to recreate a new index
from scratch.
The issue has been introduced by 911e702.
Author: Michael Paquier
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/YX0CG/QpLXcPr8HJ@paquier.xyz
Backpatch-through: 13
Rearrange src/test/perl/README so that the first section is more
clearly "how to run these tests", and the rest "how to write new
tests". Add some basic info there about debugging test failures.
Then, add cross-refs to that READNE from other READMEs that
describe how to run TAP tests.
Per suggestion from Kevin Burke, though this is not his original
patch.
Discussion: https://postgr.es/m/CAKcy5eiSbwiQnmCfnOnDCVC7B8fYyev3E=6pvvECP9pLE-Fcuw@mail.gmail.com
Previously, we pointed at the surrounding block's BEGIN keyword.
If there are multiple variables being initialized in a DECLARE section,
this isn't good enough: it can be quite confusing and unhelpful.
We do know where the variable's declaration started, so it just takes
a tiny bit more error-reporting infrastructure to use that.
Discussion: https://postgr.es/m/713975.1635530414@sss.pgh.pa.us
We had a test showing that a variable isn't referenceable in its
own initialization expression, nor in prior ones in the same block.
It *is* referenceable in later expressions in the same block, but
AFAICS there is no test case exercising that. Add one, and also
add some error cases.
Also, document that this is possible, since the docs failed to
cover the point.
Per question from tomás at tuxteam. I don't feel any need to
back-patch this, but we should ensure we don't break it in future.
Discussion: https://postgr.es/m/20211029121435.GA5414@tuxteam.de
Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
This adds tests checking for the execution of both commands. The
recovery test 002_archiving.pl is nicely adapted to that, as promotion
is triggered already twice there, and even if any of those commands fail
they don't affect recovery or promotion.
A command success is checked using a file generated by an "echo"
command, that should be able to work in all the buildfarm environments,
even Msys (but we'll know soon about that). Command failure is tested
with an "echo" command that points to a path that does not exist,
scanning the backend logs to make sure that the failure happens. Both
rely on the backend triggering the commands from the root of the data
folder, making its logic more robust.
Thanks to Neha Sharma for the extra tests on Windows.
Author: Amul Sul, Michael Paquier
Reviewed-by: Andres Freund, Euler Taveira
Discussion: https://postgr.es/m/CAAJ_b95R_c4T5moq30qsybSU=eDzDHm=4SPiAWaiMWc2OW7=1Q@mail.gmail.com
Grant privileges on views pg_backend_memory_contexts and
pg_shmem_allocations to the role pg_read_all_stats. Also grant on the
underlying functions that those views depend on.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/CALj2ACWAZo3Ar_EVsn2Zf9irG+hYK3cmh1KWhZS_Od45nd01RA@mail.gmail.com
Commit b4c4a00ea refactored the gist of the sslfiles target into a
separate makefile in order to override settings in Makefile.global.
The invocation of this this file didn't however include the absolute
path for VPATH builds, resulting in "make clean" failing. Fix by
providing the path to the new makefile.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211026174152.jjcagswnbhxu7uqz@alap3.anarazel.de
A new option "FOR ALL TABLES IN SCHEMA" in Create/Alter Publication allows
one or more schemas to be specified, whose tables are selected by the
publisher for sending the data to the subscriber.
The new syntax allows specifying both the tables and schemas. For example:
CREATE PUBLICATION pub1 FOR TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
OR
ALTER PUBLICATION pub1 ADD TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
A new system table "pg_publication_namespace" has been added, to maintain
the schemas that the user wants to publish through the publication.
Modified the output plugin (pgoutput) to publish the changes if the
relation is part of schema publication.
Updates pg_dump to identify and dump schema publications. Updates the \d
family of commands to display schema publications and \dRp+ variant will
now display associated schemas if any.
Author: Vignesh C, Hou Zhijie, Amit Kapila
Syntax-Suggested-by: Tom Lane, Alvaro Herrera
Reviewed-by: Greg Nancarrow, Masahiko Sawada, Hou Zhijie, Amit Kapila, Haiying Tang, Ajin Cherian, Rahila Syed, Bharath Rupireddy, Mark Dilger
Tested-by: Haiying Tang
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ@mail.gmail.com
Remove superuser check, allowing any user granted permissions on
pg_log_backend_memory_contexts() to log the memory contexts of any
backend.
Note that this could allow a privileged non-superuser to log the
memory contexts of a superuser backend, but as discussed, that does
not seem to be a problem.
Reviewed-by: Nathan Bossart, Bharath Rupireddy, Michael Paquier, Kyotaro Horiguchi, Andres Freund
Discussion: https://postgr.es/m/e5cf6684d17c8d1ef4904ae248605ccd6da03e72.camel@j-davis.com
The foreign data wrapper's validator function provides a HINT message with
list of valid options for the object specified in CREATE or ALTER command,
when the option given in the command is invalid. Previously
postgresql_fdw_validator() and the validator functions for postgres_fdw and
dblink_fdw worked in that way even there were no valid options in the object,
which could lead to the HINT message with empty list (because there were
no valid options). For example, ALTER FOREIGN DATA WRAPPER postgres_fdw
OPTIONS (format 'csv') reported the following ERROR and HINT messages.
This behavior was confusing.
ERROR: invalid option "format"
HINT: Valid options in this context are:
There is no such issue in file_fdw. The validator function for file_fdw
reports the HINT message "There are no valid options in this context."
instead in that case.
This commit improves postgresql_fdw_validator() and the validator functions
for postgres_fdw and dblink_fdw so that they do likewise. For example,
this change causes the above ALTER FOREIGN DATA WRAPPER command to
report the following messages.
ERROR: invalid option "nonexistent"
HINT: There are no valid options in this context.
Author: Kosei Masumura
Reviewed-by: Bharath Rupireddy, Fujii Masao
Discussion: https://postgr.es/m/557d06cebe19081bfcc83ee2affc98d3@oss.nttdata.com
The case checking for a NULL output when a slot does not exist was
too lax, as it was passing for any output generated by the query. This
fixes the matching pattern to be what it should be, matching only on
"||".
Oversight in b4ada4e.
The command is supported for physical slots for now, and returns the
type of slot, its restart_lsn and its restart_tli.
This will be useful for an upcoming patch related to pg_receivewal, to
allow the tool to be able to stream from the position of a slot, rather
than the last WAL position flushed by the backend (as reported by
IDENTIFY_SYSTEM) if the archive directory is found as empty, which would
be an advantage in the case of switching to a different archive
locations with the same slot used to avoid holes in WAL segment
archives.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
For non-MSVC builds this is make's $(CURDIR), while for MSVC builds it
is $topdir/$Config/$module. The directory is added as the second element
in the PATH, so that the install location takes precedence, but the
added PATH element takes precedence over the rest of the PATH.
The reason for this is to allow tests to find built products that are
not installed, such as the libpq_pipeline test driver.
The libpq_pipeline test is adjusted to take advantage of this.
Based on a suggestion from Andres Freund.
Backpatch to release 14.
Discussion: https://postgr.es/m/4941f5a5-2d50-1a0e-6701-14c5fefe92d6@dunslane.net
The certificate serial number generation was changed in b4c4a00ea to
use the current timestamp. The testharness must thus interrogate the
cert for the serialnumber using "openssl x509" which emits the serial
in hex format. Converting the serial to integer format to match whats
in pg_stat_ssl requires a 64-bit capable Perl. This adds a fallback
to checking for an integer when the tests with a 32-bit Perl.
Per failure on buildfarm member prairiedog.
Discussion: https://postgr.es/m/0D295F43-806D-4B3F-AB98-F941A19E0271@yesql.se
Support issuing more than one "-c command" switch to a single
psql invocation. This allows combining some things that formerly
required two or more backend launches into a single session.
In particular, we can issue DROP DATABASE as one of the -c commands
without getting "DROP DATABASE cannot run inside a transaction block".
In addition to reducing the number of sessions needed, this patch
also suppresses "NOTICE: database "foo" does not exist, skipping"
chatter that was formerly generated during pg_regress's DROP DATABASE
(or ROLE) IF NOT EXISTS calls. That moves us another step closer
to the ideal of not seeing any messages during successful build/test.
This also eliminates some hard-coded restrictions on the length of
the commands issued. I don't think we were anywhere near hitting
those, but getting rid of the limit is comforting.
Patch by me, but thanks to Nathan Bossart for starting the discussion.
Discussion: https://postgr.es/m/DCBAE0E4-BD56-482F-8A70-7FD0DC0860BE@amazon.com
Commit 1b5d797cd4 intended to relax the lock level used to rename
indexes, but inadvertently allowed *any* relation to be renamed with a
lowered lock level, as long as the command is spelled ALTER INDEX.
That's undesirable for other relation types, so retry the operation with
the higher lock if the relation turns out not to be an index.
After this fix, ALTER INDEX <sometable> RENAME will require access
exclusive lock, which it didn't before.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Onder Kalaci <onderk@microsoft.com>
Discussion: https://postgr.es/m/PH0PR21MB1328189E2821CDEC646F8178D8AE9@PH0PR21MB1328.namprd21.prod.outlook.com
ldapsearch's deprecated -h/-p arguments were removed, need to use -H now -
which has been around for over 20 years.
As perltidy insists on reflowing the parameters anyway, change order and
"phrasing" to yield a less confusing layout (per suggestion from Tom Lane).
Discussion: https://postgr.es/m/20211009233850.wvr6apcrw2ai6cnj@alap3.anarazel.de
Backpatch: 11-, where the tests were added.
The Makefile handling of certificate and keypairs used for TLS testing
had become quite difficult to work with. Adding a new cert without the
need to regenerate everything was too complicated. This patch refactors
the sslfiles make target such that adding a new certificate requires
only adding a .config file, adding it to the top of the Makefile, and
running make sslfiles.
Improvements:
- Interfile dependencies should be fixed, with the exception of the CRL
dirs.
- New certificates have serial numbers based on the current time,
reducing the chance of collision.
- The CA index state is created on demand and cleaned up automatically
at the end of the Make run.
- *.config files are now self-contained; one certificate needs one
config file instead of two.
- Duplication is reduced, and along with it some unneeded code (and
possible copy-paste errors).
- all configuration files underneath the conf/ directory.
The target is moved to its own makefile in order to avoid colliding
with global make settings.
Author: Jacob Champion <pchampion@vmware.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/d15a9838344ba090e09fd866abf913584ea19fb7.camel@vmware.com
An update such as "UPDATE ... SET fld[n].subfld = whatever"
failed if the array elements were domains rather than plain
composites. That's because isAssignmentIndirectionExpr()
failed to cope with the CoerceToDomain node that would appear
in the expression tree in this case. The result would typically
be a crash, and even if we accidentally didn't crash, we'd not
correctly preserve other fields of the same array element.
Per report from Onder Kalaci. Back-patch to v11 where arrays of
domains came in.
Discussion: https://postgr.es/m/PH0PR21MB132823A46AA36F0685B7A29AD8BD9@PH0PR21MB1328.namprd21.prod.outlook.com
The grammar of this command run on indexes with column names has always
been authorized by the parser, and it has never been documented.
Since 911e702, it is possible to define opclass parameters as of CREATE
INDEX, which actually broke the old case of ALTER INDEX/TABLE where
relation-level parameters n_distinct and n_distinct_inherited could be
defined for an index (see 76a47c0 and its thread where this point has
been touched, still remained unused). Attempting to do that in v13~
would cause the index to become unusable, as there is a new dedicated
code path to load opclass parameters instead of the relation-level ones
previously available. Note that it is possible to fix things with a
manual catalog update to bring the relation back online.
This commit disables this command for now as the use of column names for
indexes does not make sense anyway, particularly when it comes to index
expressions where names are automatically computed. One way to properly
support this case properly in the future would be to use column numbers
when it comes to indexes, in the same way as ALTER INDEX .. ALTER COLUMN
.. SET STATISTICS.
Partitioned indexes were already blocked, but not indexes. Some tests
are added for both cases.
There was some code in ANALYZE to enforce n_distinct to be used for an
index expression if the parameter was defined, but just remove it for
now until/if there is support for this (note that index-level parameters
never had support in pg_dump either, previously), so this was just dead
code.
Reported-by: Matthijs van der Vleuten
Author: Nathan Bossart, Michael Paquier
Reviewed-by: Vik Fearing, Dilip Kumar
Discussion: https://postgr.es/m/17220-15d684c6c2171a83@postgresql.org
Backpatch-through: 13
Failing to do that, any direct inserts/updates of those partitions
would fail to enforce the correct constraint, that is, one that
considers the new partition constraint of their parent table.
Backpatch to 10.
Reported by: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB5718DA1C4609A25186D1FBF194089%40OS3PR01MB5718.jpnprd01.prod.outlook.com
Do not update shm_mq's mq_bytes_written until we have written
an amount of data greater than 1/4th of the ring size, unless
the caller of shm_mq_send(v) requests a flush at the end of
the message. This reduces the number of calls to SetLatch(),
and also the number of CPU cache misses, considerably, and thus
makes shm_mq significantly faster.
Dilip Kumar, reviewed by Zhihong Yu and Tomas Vondra. Some
minor cosmetic changes by me.
Discussion: http://postgr.es/m/CAFiTN-tVXqn_OG7tHNeSkBbN+iiCZTiQ83uakax43y1sQb2OBA@mail.gmail.com
If a function-in-FROM laterally references the output of some sub-SELECT
earlier in the FROM clause, and we are able to flatten that sub-SELECT
into the outer query, the expression(s) copied into the function RTE
missed being processed by eval_const_expressions. This'd lead to trouble
and probable crashes at execution if such expressions contained
named-argument function call syntax or functions with defaulted arguments.
The bug is masked if the query contains any explicit JOIN syntax, which
may help explain why we'd not noticed.
Per bug #17227 from Bernd Dorn. This is an oversight in commit 7266d0997,
so back-patch to v13 where that came in.
Discussion: https://postgr.es/m/17227-5a28ed1512189fa4@postgresql.org
The test code added with ff9f111bce fails under valgrind, and probably
other slow cases too, because if (say) autovacuum runs in between and
produces WAL of its own, the large INSERT fails to account for that in
the LSN calculations. Rewrite to use a DO loop.
Per complaint from Andres Freund
Backpatch to all branches.
Discussion: https://postgr.es/m/20211013180338.5guyqzpkcisqugrl@alap3.anarazel.de
Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
The previous text didn't provide any clear explanation of our policy
around TAP test portability. The recipe for using perlbrew had some
problems, too: it resulted in a non-shared libperl (preventing
testing of plperl) and it caused some modules to be updated to
current when the point of the recipe is to build an old environment.
Discussion: https://postgr.es/m/E1mYY6Z-0006OL-QN@gemulon.postgresql.org
This fixes a loss of precision that occurs when the first input is
very close to 1, so that its logarithm is very small.
Formerly, during the initial low-precision calculation to estimate the
result weight, the logarithm was computed to a local rscale that was
capped to NUMERIC_MAX_DISPLAY_SCALE (1000). However, the base may be
as close as 1e-16383 to 1, hence its logarithm may be as small as
1e-16383, and so the local rscale needs to be allowed to exceed 16383,
otherwise all precision is lost, leading to a poor choice of rscale
for the full-precision calculation.
Fix this by removing the cap on the local rscale during the initial
low-precision calculation, as we already do in the full-precision
calculation. This doesn't change the fact that the initial calculation
is a low-precision approximation, computing the logarithm to around 8
significant digits, which is very fast, especially when the base is
very close to 1.
Patch by me, reviewed by Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCV-Ceu%2BHpRMf416yUe4KKFv%3DtdgXQAe5-7S9tD%3D5E-T1g%40mail.gmail.com
3c5b0685b9 used setFilePointer() to set the position of the filehandle, but
passed the wrong filehandle, always leaving the position at 0. Instead of just
fixing that, remove use of setFilePointer(), we have a perl fd at this point,
so we can just use perl's seek().
Additionally, the perl filehandle wasn't closed, just the windows filehandle.
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211003173038.64mmhgxctfqn7wl6@alap3.anarazel.de
Backpatch: 9.6-, like 3c5b0685b9
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
The previous approach didn't really work on windows, due to the PATH separator
being ';' not ':'. Instead of making the PATH change more complicated,
reference the binary using the TESTDIR environment.
Reported-By: Andres Freund <andres@anarazel.de>
Suggested-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20210930214040.odkdd42vknvzifm6@alap3.anarazel.de
Backpatch: 14-, where the test was introduced.
Commit ff9f111bce added some test code that's unportable and doesn't
add meaningful coverage. Remove it rather than try and get it to work
everywhere.
While at it, fix a typo in a log message added by the aforementioned
commit.
Backpatch to 14.
Discussion: https://postgr.es/m/3000074.1632947632@sss.pgh.pa.us
Computing related timestamps by subtracting "N days" is sensitive
to the prevailing timezone, since we interpret that as "same local
time on the N'th prior day". Even though the intervals in question
are only two to four days, through remarkable bad luck they managed
to cross the end of Ramadan in 2014, causing the test's output to
change if timezone is set to Africa/Casablanca. (Maybe in other
Muslim areas as well; I didn't check.) There's absolutely no reason
for this test to exercise interval subtraction, so just get rid of
that and use plain timestamptz constants representing the intended
values.
Per report from Andres Freund. Back-patch to v10 where this test
script came in.
Discussion: https://postgr.es/m/20210930183641.7lh4jhvpipvromca@alap3.anarazel.de
First, as pointed out by Tom Lane and Michael Paquier, I failed to
realize that Windows' PostgresNode needs an extra pg_hba.conf line
(added by PostgresNode->set_replication_conf, called internally by
->init() when 'allows_streaming=>1' is given -- but I purposefully
omitted that). I think a good fix should be to have nodes with only
'has_archiving=>1' set up for replication too, but that's a bigger
discussion. Fix it by calling ->set_replication_conf, which is not
unprecedented, as pointed out by Andrew Dunstan.
I also forgot to uncomment a ->finish() call for a pumpable IPC::Run
file descriptor. Apparently this is innocuous in almost all platforms.
Backpatch to 14. The older branches were added this file too, but not
this particular part of the test.
Discussion: https://postgr.es/m/3000074.1632947632@sss.pgh.pa.us
Discussion: https://postgr.es/m/YVT7qwhR8JmC2kfz@paquier.xyz
Physical replication always ships WAL segment files to replicas once
they are complete. This is a problem if one WAL record is split across
a segment boundary and the primary server crashes before writing down
the segment with the next portion of the WAL record: WAL writing after
crash recovery would happily resume at the point where the broken record
started, overwriting that record ... but any standby or backup may have
already received a copy of that segment, and they are not rewinding.
This causes standbys to stop following the primary after the latter
crashes:
LOG: invalid contrecord length 7262 at A8/D9FFFBC8
because the standby is still trying to read the continuation record
(contrecord) for the original long WAL record, but it is not there and
it will never be. A workaround is to stop the replica, delete the WAL
file, and restart it -- at which point a fresh copy is brought over from
the primary. But that's pretty labor intensive, and I bet many users
would just give up and re-clone the standby instead.
A fix for this problem was already attempted in commit 515e3d84a0, but
it only addressed the case for the scenario of WAL archiving, so
streaming replication would still be a problem (as well as other things
such as taking a filesystem-level backup while the server is down after
having crashed), and it had performance scalability problems too; so it
had to be reverted.
This commit fixes the problem using an approach suggested by Andres
Freund, whereby the initial portion(s) of the split-up WAL record are
kept, and a special type of WAL record is written where the contrecord
was lost, so that WAL replay in the replica knows to skip the broken
parts. With this approach, we can continue to stream/archive segment
files as soon as they are complete, and replay of the broken records
will proceed across the crash point without a hitch.
Because a new type of WAL record is added, users should be careful to
upgrade standbys first, primaries later. Otherwise they risk the standby
being unable to start if the primary happens to write such a record.
A new TAP test that exercises this is added, but the portability of it
is yet to be seen.
This has been wrong since the introduction of physical replication, so
backpatch all the way back. In stable branches, keep the new
XLogReaderState members at the end of the struct, to avoid an ABI
break.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/202108232252.dh7uxf6oxwcy@alvherre.pgsql
Updates/Deletes on a partition were allowed even without replica identity
after the parent table was added to a publication. This would later lead
to an error on subscribers. The reason was that we were not invalidating
the partition's relcache and the publication information for partitions
was not getting rebuilt. Similarly, we were not invalidating the
partitions' relcache after dropping a partitioned table from a publication
which will prohibit Updates/Deletes on its partition without replica
identity even without any publication.
Reported-by: Haiying Tang
Author: Hou Zhijie and Vignesh C
Reviewed-by: Vignesh C and Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB6113D77F583C922F1CEAA1C3FBD29@OS0PR01MB6113.jpnprd01.prod.outlook.com
Contrary to the output of native perl, Msys perl generates outputs with
CRLFs characters. There are already places in the TAP code where CRLFs
(\r\n) are automatically converted to LF (\n) on Msys, but we missed a
couple of places when running commands and using their output for
comparison, that would lead to failures.
This problem has been found thanks to the test added in 5adb067 using
TestLib::command_checks_all(), but after a closer look more code paths
were missing a filter.
This is backpatched all the way down to prevent any surprises if a new
test is introduced in stable branches.
Reviewed-by: Andrew Dunstan, Álvaro Herrera
Discussion: https://postgr.es/m/1252480.1631829409@sss.pgh.pa.us
Backpatch-through: 9.6
Commit 55dc86eca changed pull_varnos to use (if possible) the associated
ph_eval_at for a PlaceHolderVar. I missed a fine point though: we might
be looking at a PHV in the quals or tlist of a child appendrel, in which
case we need to compute a ph_eval_at value that's been translated in the
same way that the PHV itself has been (cf. adjust_appendrel_attrs).
Fortunately, enough info is available in the PlaceHolderInfo to make
such translation possible without additional outside data, so we don't
need another round of uglification of planner APIs. This is a little
bit complicated, but since it's a hard-to-hit corner case, I'm not much
worried about adding cycles here.
Per report from Jaime Casanova. Back-patch to v12, like the previous
commit.
Discussion: https://postgr.es/m/20210915230959.GB17635@ahch-to
The rewriter transformation for SEARCH BREADTH FIRST produces a
FieldSelect on a Var of type RECORD, where the Var references the
recursive union's worktable output. EXPLAIN VERBOSE failed to handle
this case, because it only expected such Vars to appear in CteScans
not WorkTableScans. Fix that, and add some test cases exercising
EXPLAIN on SEARCH and CYCLE queries.
In principle this oversight is an old bug, but it seems that the
case is unreachable without SEARCH BREADTH FIRST, because the
parser fails when attempting to create such a reference manually.
So for today I'll just patch HEAD/v14. Someday we might find that
the code portion of this patch needs to be back-patched further.
Per report from Atsushi Torikoshi.
Discussion: https://postgr.es/m/5bafa66ad529e11860339565c9e7c166@oss.nttdata.com
It's possible for us to copy an AlternativeSubPlan expression node
into multiple places, for example the scan quals of several
partition children. Then it's possible that we choose a different
one of the alternatives as optimal in each place. Commit 41efb8340
failed to consider this scenario, so its attempt to remove "unused"
subplans could remove subplans that were still used elsewhere.
Fix by delaying the removal logic until we've examined all the
AlternativeSubPlans in a given query level. (This does assume that
AlternativeSubPlans couldn't get copied to other query levels, but
for the foreseeable future that's fine; cf qual_is_pushdown_safe.)
Per report from Rajkumar Raghuwanshi. Back-patch to v14
where the faulty logic came in.
Discussion: https://postgr.es/m/CAKcux6==O3NNZC3bZ2prRYv3cjm3_Zw1GfzmOjEVqYN4jub2+Q@mail.gmail.com
We have long forbidden fetching backwards from a NO SCROLL cursor,
but the prohibition didn't extend to cases in which we rewind the
query altogether and then re-fetch forwards. I think the reason is
that this logic was mainly meant to protect plan nodes that can't
be run in the reverse direction. However, re-reading the query output
is problematic if the query is volatile (which includes SELECT FOR
UPDATE, not just queries with volatile functions): the re-read can
produce different results, which confuses the cursor navigation logic
completely. Another reason for disliking this approach is that some
code paths will either fetch backwards or rewind-and-fetch-forwards
depending on the distance to the target row; so that seemingly
identical use-cases may or may not draw the "cursor can only scan
forward" error. Hence, let's clean things up by disallowing rewind
as well as fetch-backwards in a NO SCROLL cursor.
Ordinarily we'd only make such a definitional change in HEAD, but
there is a third reason to consider this change now. Commit ba2c6d6ce
created some new user-visible anomalies for non-scrollable cursors
WITH HOLD, in that navigation in the cursor result got confused if the
cursor had been partially read before committing. The only good way
to resolve those anomalies is to forbid rewinding such a cursor, which
allows removal of the incorrect cursor state manipulations that
ba2c6d6ce added to PersistHoldablePortal.
To minimize the behavioral change in the back branches (including
v14), refuse to rewind a NO SCROLL cursor only when it has a holdStore,
ie has been held over from a previous transaction due to WITH HOLD.
This should avoid breaking most applications that have been sloppy
about whether to declare cursors as scrollable. We'll enforce the
prohibition across-the-board beginning in v15.
Back-patch to v11, as ba2c6d6ce was.
Discussion: https://postgr.es/m/3712911.1631207435@sss.pgh.pa.us
Michael Paquier
Andres Freund
Tom Lane
Alvaro Herrera
Andrew Dunstan
Peter Eisentraut
David Rowley
Tomas Vondra
Thomas Munro
Amit Kapila
Stephen Frost
Peter Geoghegan
Daniel Gustafsson
Robert Haas
Joe Conway
Dean Rasheed
Noah Misch
Heikki Linnakangas
Alexander Korotkov
Fujii Masao
Jeff Davis
Bruce Momjian
John Naylor