wal_receiver_timeout, wal_receiver_status_interval and
wal_retrieve_retry_interval configuration parameters affect the logical rep
worker, but previously only wal_receiver_status_interval was not mentioned
as such parameter in the doc.
Back-patch to v10 where logical rep was added.
Author: Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/CAD21AoBUnuH_UsnKXyPCsCR7EAMamW0sSb6a7=WgiQRpnMAp5w@mail.gmail.com
pgbench can skip some transactions when both -R and -L options are used.
Previously, this resulted in slightly silly statistics both in progress
reports and final output, because the skipped transactions were counted
as executed for TPS and related stats. Discount skipped xacts in TPS
numbers, and also when figuring the percentage of xacts exceeding the
latency limit.
Also, don't print per-script skipped-transaction counts when there is
only one script. That's redundant with the overall count, and it's
inconsistent with the fact that we don't print other per-script stats
when there's only one script. Clean up some unnecessary interactions
between what should be independent options that were due to that
decision.
While at it, avoid division-by-zero in cases where no transactions were
executed. While on modern platforms this would generally result in
printing "NaN" rather than a crash, that isn't spelled consistently
across platforms and it would confuse many people. Skip the relevant
output entirely when practical, else print zeroes.
Fabien Coelho, reviewed by Steve Singer, additional hacking by me
Discussion: https://postgr.es/m/26654.1505232433@sss.pgh.pa.us
Previously, any attempt to request a 3.x protocol version other than
3.0 would lead to a hard connection failure, which made the minor
protocol version really no different from the major protocol version
and precluded gentle protocol version breaks. Instead, when the
client requests a 3.x protocol version where x is greater than 0, send
the new NegotiateProtocolVersion message to convey that we support
only 3.0. This makes it possible to introduce new minor protocol
versions without requiring a connection retry when the server is
older.
In addition, if the startup packet includes name/value pairs where
the name starts with "_pq_.", assume that those are protocol options,
not GUCs. Include those we don't support (i.e. all of them, at
present) in the NegotiateProtocolVersion message so that the client
knows they were not understood. This makes it possible for the
client to request previously-unsupported features without bumping
the protocol version at all; the client can tell from the server's
response whether the option was understood.
It will take some time before servers that support these new
facilities become common in the wild; to speed things up and make
things easier for a future 3.1 protocol version, back-patch to all
supported releases.
Robert Haas and Badrul Chowdhury
Discussion: http://postgr.es/m/BN6PR21MB0772FFA0CBD298B76017744CD1730@BN6PR21MB0772.namprd21.prod.outlook.com
Discussion: http://postgr.es/m/30788.1498672033@sss.pgh.pa.us
This code evidently intended to treat backslash as an escape character
within double-quoted substrings, but it was sufficiently confused that
cases like ..."foo\\"... did not work right: the second backslash
managed to quote the double-quote after it, despite being quoted itself.
Rewrite to get that right, while preserving the existing behavior
outside double-quoted substrings, which is that backslash isn't special
except in the combination \".
Comparing to Oracle, it seems that their version of to_char() for
timestamps allows literal alphanumerics only within double quotes, while
non-alphanumerics are allowed outside quotes; backslashes aren't special
anywhere; there is no way at all to emit a literal double quote.
(Bizarrely, their to_char() for numbers is different; it doesn't allow
literal text at all AFAICT.) The fact that they don't treat backslash
as special justifies our existing behavior for backslash outside double
quotes. I considered making backslash inside double quotes act the same
way (ie, special only if before "), which in a green field would be a
more consistent behavior. But that would likely break more existing SQL
code than what this patch does.
Add some test cases illustrating this behavior. (Only the last new
case actually changes behavior in this commit.)
Little of this behavior was documented, either, so fix that.
Discussion: https://postgr.es/m/3626.1510949486@sss.pgh.pa.us
This is the basic feature set using OpenSSL to support the feature. In
order to allow the frontend and the backend to fetch the sent and
expected TLS Finished messages, a PG-like API is added to be able to
make the interface pluggable for other SSL implementations.
This commit also adds a infrastructure to facilitate the addition of
future channel binding types as well as libpq parameters to control the
SASL mechanism names and channel binding names. Those will be added by
upcoming commits.
Some tests are added to the SSL test suite to test SCRAM authentication
with channel binding.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Non-data template patterns would consume characters whether or not those
characters were what the pattern expected, for example
SELECT TO_NUMBER('1234', '9,999');
produced 134 because the '2' got eaten by the comma pattern. This seems
undesirable, not least because it doesn't happen in Oracle. For the ','
and 'G' template patterns, we can fix this by consuming characters only
if they match what the pattern would output. For non-data patterns such
as 'L' and 'TH', it seems impractical to tighten things up to the point of
consuming only exact matches to what the pattern would output; but we can
improve matters quite a lot by redefining the behavior as "consume only
characters that aren't digits, signs, decimal point, or comma".
Also, fix it so that the behavior is to consume the number of *characters*
the pattern would output, not the number of *bytes*. The old coding would
do surprising things with non-ASCII currency symbols, for example. (It
would be good to apply that rule for literal text as well, but this commit
only fixes it for non-data patterns.)
Oliver Ford, reviewed by Thomas Munro and Nathan Wagner, and whacked around
a bit more by me
Discussion: https://postgr.es/m/CAGMVOdvpbMqPf9XWNzOwBpzJfErkydr_fEGhmuDGa015z97mwg@mail.gmail.com
Commit 5ecc0d738 removed the hard-wired superuser checks in lo_import
and lo_export in favor of protecting them with SQL permissions, but
failed to adjust the documentation to match. Fix that, and add a
<caution> paragraph pointing out the nontrivial security hazards
involved with actually granting such permissions. (It's still better
than ALLOW_DANGEROUS_LO_FUNCTIONS, though.)
Also, commit ae20b23a9 caused large object read/write privilege to
be checked during lo_open() rather than in the actual read or write
calls. Document that.
Discussion: https://postgr.es/m/CAB7nPqRHmNOYbETnc_2EjsuzSM00Z+BWKv9sy6tnvSd5gWT_JA@mail.gmail.com
This feature caters to specialized use-cases such as running the normal
pgbench scenario with nonstandard indexes, or inserting other actions
between steps of the initialization sequence. The normal sequence of
initialization actions is broken down into half a dozen steps which can
be executed in a user-specified order, to the extent to which that's
sensible. The actions themselves aren't changed, except to make them
more robust against nonstandard uses:
* all four tables are now dropped in one DROP command, to reduce
assumptions about what foreign key relationships exist;
* all four tables are now truncated at the start of the data load
step, for consistency;
* the foreign key creation commands now specify constraint names, to
prevent accidentally creating duplicate constraints by executing the
'f' step twice.
Make some cosmetic adjustments in the messages emitted by pgbench
so that it's clear which steps are getting run, and so that the
messages agree with the documented names of the steps.
In passing, fix failure to enforce that the -v option is used only
in benchmarking mode.
Masahiko Sawada, reviewed by Fabien Coelho, editorialized a bit by me
Discussion: https://postgr.es/m/CAD21AoCsz0ZzfCFcxYZ+PUdpkDd5VsCSG0Pre_-K1EgokCDFYA@mail.gmail.com
Hash partitioning is useful when you want to partition a growing data
set evenly. This can be useful to keep table sizes reasonable, which
makes maintenance operations such as VACUUM faster, or to enable
partition-wise join.
At present, we still depend on constraint exclusion for partitioning
pruning, and the shape of the partition constraints for hash
partitioning is such that that doesn't work. Work is underway to fix
that, which should both improve performance and make partitioning
pruning work with hash partitioning.
Amul Sul, reviewed and tested by Dilip Kumar, Ashutosh Bapat, Yugo
Nagata, Rajkumar Raghuwanshi, Jesper Pedersen, and by me. A few
final tweaks also by me.
Discussion: http://postgr.es/m/CAAJ_b96fhpJAP=ALbETmeLk1Uni_GFZD938zgenhF49qgDTjaQ@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Previously server reserved WAL for last two checkpoints,
which used too much disk space for small servers.
Bumps PG_CONTROL_VERSION
Author: Simon Riggs <simon@2ndQuadrant.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Add docs to explain this for other backup mechanisms
Author: David Steele <david@pgmasters.net>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndQuadrant.com> et al
In the v10 branch, also back-patch the effects of 1ff01b390 and c29c57890
on these files, to reduce future maintenance issues. (I'd do it further
back, except that the 9.X branches differ anyway due to xlog-to-wal
link tag renaming.)
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first. Note that a
fair percentage of the entries apply only to prior branches because
their issue was already fixed in 10.0.
This makes the produced HTML anchors upper case, making it backward
compatible with the previous (9.6) build system.
Reported-by: Thomas Kellerer <spam_eater@gmx.net>
Also make the link to pg_stat_replication more precise.
Author: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Jeff Janes <jeff.janes@gmail.com>
Document the order of changing certain settings when using hot-standby
servers. This is just a logical consequence of what was already
documented, but it gives the users some more practical advice.
Author: Yorick Peterse <yorickpeterse@gmail.com>
Reviewed-by: Aleksander Alekseev <a.alekseev@postgrespro.ru>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
CREATE USER is an alias for CREATE ROLE, not its own command any longer,
so clean up references to the 'sql-createuser' link to go to
'sql-createrole' instead.
In passing, change a few cases of 'CREATE USER' to be
'CREATE ROLE ... LOGIN'. The remaining cases appear reasonable and
also mention the distinction between 'CREATE ROLE' and 'CREATE USER'.
Also, don't say CREATE USER "assumes" LOGIN, but rather "includes".
Patch-by: David G. Johnston, with assumes->includes by me.
Discussion: https://postgr.es/m/CAKFQuwYrbhKV8hH4TEABrDRBwf=gKremF=mLPQ6X2yGqxgFpYA@mail.gmail.com
The change made by commit 906bfcad7 means that if you're writing
a parenthesized column list in UPDATE ... SET, but that column list
is only one column, you now need to write ROW(expression) on the
righthand side, not just a parenthesized expression. This was an
intentional change for spec compatibility and potential future
expansion of the possibilities for the RHS, but I'd neglected to
document it as a compatibility issue, figuring that hardly anyone
would bother with parenthesized syntax for a single target column.
I was wrong, as shown by questions from Justin Pryzby, Adam Brusselback,
and others. Move the release note item into the compatibility section
and point out the behavior change for a single target column.
Discussion: https://postgr.es/m/CAMjNa7cDLzPcs0xnRpkvqmJ6Vb6G3EH8CYGp9ZBjXdpFfTz6dg@mail.gmail.com
This is already present in the CREATE TABLE documentation, but it's
nicer not to have to refer to CREATE TABLE to find out the syntax
for ALTER TABLE.
Lætitia Avrot
This is the last major omission in our domains feature: you can now
make a domain over anything that's not a pseudotype.
The major complication from an implementation standpoint is that places
that might be creating tuples of a domain type now need to be prepared
to apply domain_check(). It seems better that unprepared code fail
with an error like "<type> is not composite" than that it silently fail
to apply domain constraints. Therefore, relevant infrastructure like
get_func_result_type() and lookup_rowtype_tupdesc() has been adjusted
to treat domain-over-composite as a distinct case that unprepared code
won't recognize, rather than just transparently treating it the same
as plain composite. This isn't a 100% solution to the possibility of
overlooked domain checks, but it catches most places.
In passing, improve typcache.c's support for domains (it can now cache
the identity of a domain's base type), and rewrite the argument handling
logic in jsonfuncs.c's populate_record[set]_worker to reduce duplicative
per-call lookups.
I believe this is code-complete so far as the core and contrib code go.
The PLs need varying amounts of work, which will be tackled in followup
patches.
Discussion: https://postgr.es/m/4206.1499798337@sss.pgh.pa.us
I was a bit surprised to find that domains were almost completely
unmentioned in the main SGML documentation, outside of the reference
pages for CREATE/ALTER/DROP DOMAIN. In particular, noplace was it
mentioned that we don't support domains over composite, making it
hard to document the planned fix for that.
Hence, add a section about domains to chapter 8 (Data Types).
Also, modernize the type system overview in section 37.2; it had never
heard of range types, and insisted on calling arrays base types, which
seems a bit odd from a user's perspective; furthermore it didn't fit well
with the fact that we now support arrays over types other than base types.
It seems appropriate to use the term "container types" to describe all of
arrays, composites, and ranges, so let's do that.
Also a few other minor improvements, notably improve an example query
in rowtypes.sgml by using a LATERAL function instead of an ad-hoc
OFFSET 0 clause.
In part this is mop-up for commit c12d570fa, which missed updating 37.2
to reflect the fact that it added arrays of domains. We could possibly
back-patch this without that claim, but I don't feel a strong need to.
IDs in SGML are case insensitive, and we have accumulated a mix of upper
and lower case IDs, including different variants of the same ID. In
XML, these will be case sensitive, so we need to fix up those
differences. Going to all lower case seems most straightforward, and
the current build process already makes all anchors and lower case
anyway during the SGML->XML conversion, so this doesn't create any
difference in the output right now. A future XML-only build process
would, however, maintain any mixed case ID spellings in the output, so
that is another reason to clean this up beforehand.
Author: Alexander Lakhin <exclusion@gmail.com>
We say 'OWNER TO' in the synopsis; let's use that form elsewhere.
There is a paragraph in the <note> section that refers to various
subcommands very loosely (including OWNER); I didn't think it was an
improvement to change that one.
This is a fairly inconsequential change, so no backpatch.
Author: Amit Langote
Discussion: https://postgr.es/m/69ec7b51-03e5-f523-95ce-c070ee790e70@lab.ntt.co.jp
For DocBook XML compatibility, don't use SGML empty tags (</>) anymore,
replace by the full tag name. Add a warning option to catch future
occurrences.
Alexander Lakhin, Jürgen Purtz
Up to now, there's been hard-wired assumptions that normal aggregates'
final functions never modify their transition states, while ordered-set
aggregates' final functions always do. This has always been a bit
limiting, and in particular it's getting in the way of improving the
built-in ordered-set aggregates to allow merging of transition states.
Therefore, let's introduce catalog and CREATE AGGREGATE infrastructure
that lets the finalfn's behavior be declared explicitly.
There are now three possibilities for the finalfn behavior: it's purely
read-only, it trashes the transition state irrecoverably, or it changes
the state in such a way that no more transfn calls are possible but the
state can still be passed to other, compatible finalfns. There are no
examples of this third case today, but we'll shortly make the built-in
OSAs act like that.
This change allows user-defined aggregates to explicitly disclaim support
for use as window functions, and/or to prevent transition state merging,
if their implementations cannot handle that. While it was previously
possible to handle the window case with a run-time error check, there was
not any way to prevent transition state merging, which in retrospect is
something commit 804163bc2 should have provided for. But better late
than never.
In passing, split out pg_aggregate.c's extern function declarations into
a new header file pg_aggregate_fn.h, similarly to what we've done for
some other catalog headers, so that pg_aggregate.h itself can be safe
for frontend files to include. This lets pg_dump use the symbolic
names for relevant constants.
Discussion: https://postgr.es/m/4834.1507849699@sss.pgh.pa.us
The GRANT reference page, which lists the default privileges for new
objects, failed to mention that USAGE is granted by default for data
types and domains. As a lesser sin, it also did not specify anything
about the initial privileges for sequences, FDWs, foreign servers,
or large objects. Fix that, and add a comment to acldefault() in the
probably vain hope of getting people to maintain this list in future.
Noted by Laurenz Albe, though I editorialized on the wording a bit.
Back-patch to all supported branches, since they all have this behavior.
Discussion: https://postgr.es/m/1507620895.4152.1.camel@cybertec.at
Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
Haribabu Kommi, reviewed by Dilip Kumar and Rafia Sabih. Various
cosmetic changes by me to explain why this appears to be safe but
allowing inserts in parallel mode in general wouldn't be. Also, I
removed the REFRESH MATERIALIZED VIEW case from Haribabu's patch,
since I'm not convinced that case is OK, and hacked on the
documentation somewhat.
Discussion: http://postgr.es/m/CAJrrPGdo5bak6qnPWe8Kpi8g_jfQEs-G4SYmG9y+OFaw2-dPvA@mail.gmail.com
A lot of semi-internal code just prints out numeric SPI error codes,
which is not very helpful. We already have an API function to convert
the codes to a string, so let's make more use of that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Not much to say about this; does what it says on the tin.
However, formerly, if there was a column list then the ANALYZE action was
implied; now it must be specified, or you get an error. This is because
it would otherwise be a bit unclear what the user meant if some tables
have column lists and some don't.
Nathan Bossart, reviewed by Michael Paquier and Masahiko Sawada, with some
editorialization by me
Discussion: https://postgr.es/m/E061A8E3-5E3D-494D-94F0-E8A9B312BBFC@amazon.com
Document better how to create custom collations and what locale strings
ICU accepts. Explain the ICU examples in more detail. Also update the
text on the CREATE COLLATION reference page a bit to take ICU more into
account.
Allowing arrays with a domain type as their element type was left un-done
in the original domain patch, but not for any very good reason. This
omission leads to such surprising results as array_agg() not working on
a domain column, because the parser can't identify a suitable output type
for the polymorphic aggregate.
In order to fix this, first clean up the APIs of coerce_to_domain() and
some internal functions in parse_coerce.c so that we consistently pass
around a CoercionContext along with CoercionForm. Previously, we sometimes
passed an "isExplicit" boolean flag instead, which is strictly less
information; and coerce_to_domain() didn't even get that, but instead had
to reverse-engineer isExplicit from CoercionForm. That's contrary to the
documentation in primnodes.h that says that CoercionForm only affects
display and not semantics. I don't think this change fixes any live bugs,
but it makes things more consistent. The main reason for doing it though
is that now build_coercion_expression() receives ccontext, which it needs
in order to be able to recursively invoke coerce_to_target_type().
Next, reimplement ArrayCoerceExpr so that the node does not directly know
any details of what has to be done to the individual array elements while
performing the array coercion. Instead, the per-element processing is
represented by a sub-expression whose input is a source array element and
whose output is a target array element. This simplifies life in
parse_coerce.c, because it can build that sub-expression by a recursive
invocation of coerce_to_target_type(). The executor now handles the
per-element processing as a compiled expression instead of hard-wired code.
The main advantage of this is that we can use a single ArrayCoerceExpr to
handle as many as three successive steps per element: base type conversion,
typmod coercion, and domain constraint checking. The old code used two
stacked ArrayCoerceExprs to handle type + typmod coercion, which was pretty
inefficient, and adding yet another array deconstruction to do domain
constraint checking seemed very unappetizing.
In the case where we just need a single, very simple coercion function,
doing this straightforwardly leads to a noticeable increase in the
per-array-element runtime cost. Hence, add an additional shortcut evalfunc
in execExprInterp.c that skips unnecessary overhead for that specific form
of expression. The runtime speed of simple cases is within 1% or so of
where it was before, while cases that previously required two levels of
array processing are significantly faster.
Finally, create an implicit array type for every domain type, as we do for
base types, enums, etc. Everything except the array-coercion case seems
to just work without further effort.
Tom Lane, reviewed by Andrew Dunstan
Discussion: https://postgr.es/m/9852.1499791473@sss.pgh.pa.us
Add bgw_type field to background worker structure. It is intended to be
set to the same value for all workers of the same type, so they can be
grouped in pg_stat_activity, for example.
The backend_type column in pg_stat_activity now shows bgw_type for a
background worker. The ps listing also no longer calls out that a
process is a background worker but just show the bgw_type. That way,
being a background worker is more of an implementation detail now that
is not shown to the user. However, most log messages still refer to
'background worker "%s"'; otherwise constructing sensible and
translatable log messages would become tricky.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
At the time replacement_sort_tuples was introduced, there were still
cases where replacement selection sort noticeably outperformed using
quicksort even for the first run. However, those cases seem to have
evaporated as a result of further improvements made since that time
(and perhaps also advances in CPU technology). So remove replacement
selection and the controlling GUC entirely. This makes tuplesort.c
noticeably simpler and probably paves the way for further
optimizations someone might want to do later.
Peter Geoghegan, with review and testing by Tomas Vondra and me.
Discussion: https://postgr.es/m/CAH2-WzmmNjG_K0R9nqYwMq3zjyJJK+hCbiZYNGhAy-Zyjs64GQ@mail.gmail.com
For XML compatibility, replace marked sections <![IGNORE[ ]]> with
comments <!-- -->. In some cases it seemed better to remove the ignored
text altogether, and in one case the text should not have been ignored.
This is the way lcov was intended to be used. It is much faster and
more robust and makes the makefiles simpler than running it in each
subdirectory.
The previous coding ran gcov before lcov, but that is useless because
lcov/geninfo call gcov internally and use that information. Moreover,
this led to complications and failures during parallel make. This
separates the two targets: You either use "make coverage" to get
textual output from gcov or "make coverage-html" to get an HTML report
via lcov. (Using both is still problematic because they write the same
output files.)
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This reverts commit 15bc038f9, along with the followon commits 1635e80d3
and 984c92074 that tried to clean up the problems exposed by bug #14825.
The result was incomplete because it failed to address parallel-query
requirements. With 10.0 release so close upon us, now does not seem like
the time to be adding more code to fix that. I hope we can un-revert this
code and add the missing parallel query support during the v11 cycle.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
Previously, we created a variant of the installation instructions for
producing the plain-text INSTALL file by marking up certain parts of
installation.sgml using SGML parameterized marked sections. Marked
sections will not work anymore in XML, so before we can convert the
documentation to XML, we need a new approach.
DocBook provides a "profiling" feature that allows selecting content
based on attributes, which would work here. But it imposes a noticeable
overhead when building the full documentation and causes complications
when building some output formats, and given that we recently spent a
fair amount of effort optimizing the documentation build time, it seems
sad to have to accept that.
So as an alternative, (1) we create our own mini-profiling layer that
adjusts just the text we want, and (2) assemble the pieces of content
that we want in the INSTALL file using XInclude. That way, there is no
overhead when building the full documentation and most of the "ugly"
stuff in installation.sgml can be removed and dealt with out of line.
When requesting a particular replication slot, the new pg_basebackup
option -C/--create-slot creates it before starting to replicate from it.
Further refactor the slot creation logic to include the temporary slot
creation logic into the same function. Add new arguments is_temporary
and preserve_wal to CreateReplicationSlot(). Print in --verbose mode
that a slot has been created.
Author: Michael Banck <michael.banck@credativ.de>
It drops objects outside information_schema that depend on objects
inside information_schema. For example, it will drop a user-defined
view if the view query refers to information_schema.
Discussion: https://postgr.es/m/20170831025345.GE3963697@rfd.leadboat.com
The blacklist mechanism added by the preceding commit directly fixes
most of the practical cases that the same-transaction test was meant
to cover. What remains is use-cases like
begin;
create type e as enum('x');
alter type e add value 'y';
-- use 'y' somehow
commit;
However, because the same-transaction test is heuristic, it fails on
small variants of that, such as renaming the type or changing its
owner. Rather than try to explain the behavior to users, let's
remove it and just have a rule that the newly added value can't be
used before being committed, full stop. Perhaps later it will be
worth the implementation effort and overhead to have a more accurate
test for type-was-created-in-this-transaction. We'll wait for some
field experience with v10 before deciding to do that.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
Commit 15bc038f9 allowed ALTER TYPE ADD VALUE to be executed inside
transaction blocks, by disallowing the use of the added value later
in the same transaction, except under limited circumstances. However,
the test for "limited circumstances" was heuristic and could reject
references to enum values that were created during CREATE TYPE AS ENUM,
not just later. This breaks the use-case of restoring pg_dump scripts
in a single transaction, as reported in bug #14825 from Balazs Szilfai.
We can improve this by keeping a "blacklist" table of enum value OIDs
created by ALTER TYPE ADD VALUE during the current transaction. Any
visible-but-uncommitted value whose OID is not in the blacklist must
have been created by CREATE TYPE AS ENUM, and can be used safely
because it could not have a lifespan shorter than its parent enum type.
This change also removes the restriction that a renamed enum value
can't be used before being committed (unless it was on the blacklist).
Andrew Dunstan, with cosmetic improvements by me.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
The --slot option somehow ended up under options controlling the output,
and some other options were in a nonsensical place or were not moved
after recent renamings, so tidy all that up a bit.
Explain more about how the different password authentication methods and
the password_encryption settings relate to each other, give some
upgrading advice, and set a better link from the release notes.
Reviewed-by: Jeff Janes <jeff.janes@gmail.com>
The recent addition of a test suite for this module revealed a few
problems. It uses a crypt() method that is no longer considered secure
and doesn't work anymore on some platforms. Using a volatile input
function violates internal sanity check assumptions and leads to
failures on the build farm.
So this module is neither a usable security tool nor a good example for
an extension. No one wanted to argue for keeping or improving it, so
remove it.
Discussion: https://www.postgresql.org/message-id/5645b0d7-cc40-6ab5-c553-292a91091ee7%402ndquadrant.com
"\if :{?variable_name}" will be translated to "\if TRUE" if the variable
exists and "\if FALSE" otherwise. Thus it will be possible to execute code
conditionally on the existence of the variable, regardless of its value.
Fabien Coelho, with some review by Robins Tharakan and some light text
editing by me.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1708260835520.3627@lancre
GRANT, REVOKE, and some allied commands allow the noise word GROUP
before a role name (cf. grantee production in gram.y). This option
does not exist elsewhere, but it had nonetheless snuck into the
documentation for ALTER ROLE, ALTER USER, and CREATE SCHEMA.
Seems to be a copy-and-pasteo in commit 31eae6028, which did expand the
syntax choices here, but not in that way. Back-patch to 9.5 where that
came in.
Discussion: https://postgr.es/m/20170916123750.8885.66941@wrigleys.postgresql.org
Remove gratuitous differences in the process names shown in
pg_stat_activity.backend_type and the ps output.
Reviewed-by: Takayuki Tsunakawa <tsunakawa.takay@jp.fujitsu.com>
Since rsync 3.0.0 (released in 2008), the default way to enumerate
changes was changed in a way that makes it less likely that the hardlink
sync mode works. Since the whole point of the documented procedure is
for the hardlinks to work, change our docs to suggest using the
backwards compatibility switch.
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
There are common use-cases in which the compress and/or decompress
functions can be omitted, with the result being that we make no
data transformation when storing or retrieving index values.
Previously, you had to provide a no-op function anyway, but this
patch allows such opclass support functions to be omitted.
Furthermore, if the compress function is omitted, then the core code
knows that the stored representation is the same as the original data.
This means we can allow index-only scans without requiring a fetch
function to be provided either. Previously you had to provide a
no-op fetch function if you wanted IOS to work.
This reportedly provides a small performance benefit in such cases,
but IMO the real reason for doing it is just to reduce the amount of
useless boilerplate code that has to be written for GiST opclasses.
Andrey Borodin, reviewed by Dmitriy Sarafannikov
Discussion: https://postgr.es/m/CAJEAwVELVx9gYscpE=Be6iJxvdW5unZ_LkcAaVNSeOwvdwtD=A@mail.gmail.com
Add item about number of times statement-level triggers will be fired.
Rearrange the compatibility items into (what seems to me) a less
random ordering.
Commit 0f79440fb introduced mechanism to keep AFTER STATEMENT triggers
from firing more than once per statement, which was formerly possible
if more than one FK enforcement action had to be applied to a given
table. Add a similar mechanism for BEFORE STATEMENT triggers, so that
we don't have the unexpected situation of firing BEFORE STATEMENT
triggers more often than AFTER STATEMENT.
As with the previous patch, back-patch to v10.
Discussion: https://postgr.es/m/22315.1505584992@sss.pgh.pa.us
I noticed that there were exactly no complete examples of use of
a transition table in a trigger function, and no clear description
of just how you'd do it either. Improve that.
The standard says that all changes of the same kind (insert, update, or
delete) caused in one table by a single SQL statement should be reported
in a single transition table; and by that, they mean to include foreign key
enforcement actions cascading from the statement's direct effects. It's
also reasonable to conclude that if the standard had wCTEs, they would say
that effects of wCTEs applying to the same table as each other or the outer
statement should be merged into one transition table. We weren't doing it
like that.
Hence, arrange to merge tuples from multiple update actions into a single
transition table as much as we can. There is a problem, which is that if
the firing of FK enforcement triggers and after-row triggers with
transition tables is interspersed, we might need to report more tuples
after some triggers have already seen the transition table. It seems like
a bad idea for the transition table to be mutable between trigger calls.
There's no good way around this without a major redesign of the FK logic,
so for now, resolve it by opening a new transition table each time this
happens.
Also, ensure that AFTER STATEMENT triggers fire just once per statement,
or once per transition table when we're forced to make more than one.
Previous versions of Postgres have allowed each FK enforcement query
to cause an additional firing of the AFTER STATEMENT triggers for the
referencing table, but that's certainly not per spec. (We're still
doing multiple firings of BEFORE STATEMENT triggers, though; is that
something worth changing?)
Also, forbid using transition tables with column-specific UPDATE triggers.
The spec requires such transition tables to show only the tuples for which
the UPDATE trigger would have fired, which means maintaining multiple
transition tables or else somehow filtering the contents at readout.
Maybe someday we'll bother to support that option, but it looks like a
lot of trouble for a marginal feature.
The transition tables are now managed by the AfterTriggers data structures,
rather than being directly the responsibility of ModifyTable nodes. This
removes a subtransaction-lifespan memory leak introduced by my previous
band-aid patch 3c4359521.
In passing, refactor the AfterTriggers data structures to reduce the
management overhead for them, by using arrays of structs rather than
several parallel arrays for per-query-level and per-subtransaction state.
I failed to resist the temptation to do some copy-editing on the SGML
docs about triggers, above and beyond merely documenting the effects
of this patch.
Back-patch to v10, because we don't want the semantics of transition
tables to change post-release.
Patch by me, with help and review from Thomas Munro.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
Document that rsync is an _optional_ way to upgrade standbys, suggest
rsync option --dry-run, and mention a way of upgrading one standby from
another using rsync. Also clarify some instructions by specifying if
they operate on the old or new clusters.
Reported-by: Stephen Frost, Magnus Hagander
Discussion: https://postgr.es/m/20170914191250.GB6595@momjian.us
Backpatch-through: 9.5
Historically, the selectivity functions have simply not distinguished
< from <=, or > from >=, arguing that the fraction of the population that
satisfies the "=" aspect can be considered to be vanishingly small, if the
comparison value isn't any of the most-common-values for the variable.
(If it is, the code path that executes the operator against each MCV will
take care of things properly.) But that isn't really true unless we're
dealing with a continuum of variable values, and in practice we seldom are.
If "x = const" would estimate a nonzero number of rows for a given const
value, then it follows that we ought to estimate different numbers of rows
for "x < const" and "x <= const", even if the const is not one of the MCVs.
Handling this more honestly makes a significant difference in edge cases,
such as the estimate for a tight range (x BETWEEN y AND z where y and z
are close together).
Hence, split scalarltsel into scalarltsel/scalarlesel, and similarly
split scalargtsel into scalargtsel/scalargesel. Adjust <= and >=
operator definitions to reference the new selectivity functions.
Improve the core ineq_histogram_selectivity() function to make a
correction for equality. (Along the way, I learned quite a bit about
exactly why that function gives good answers, which I tried to memorialize
in improved comments.)
The corresponding join selectivity functions were, and remain, just stubs.
But I chose to split them similarly, to avoid confusion and to prevent the
need for doing this exercise again if someone ever makes them less stubby.
In passing, change ineq_histogram_selectivity's clamp for extreme
probability estimates so that it varies depending on the histogram
size, instead of being hardwired at 0.0001. With the default histogram
size of 100 entries, you still get the old clamp value, but bigger
histograms should allow us to put more faith in edge values.
Tom Lane, reviewed by Aleksander Alekseev and Kuntal Ghosh
Discussion: https://postgr.es/m/12232.1499140410@sss.pgh.pa.us
The documentation claimed that one should send
"pg_same_as_startup_message" as the user name in the SCRAM messages, but
this did not match the actual implementation, so remove it.
This makes it clear that pg_upgrade standby upgrade instructions should
only be used in link mode, adds examples, and explains how rsync works
with links.
Reported-by: Andreas Joseph Krogh
Discussion: https://postgr.es/m/VisenaEmail.6c.c0e592c5af4ef0a2.15e785dcb61@tc7-visena
Backpatch-through: 9.5
This patch adds ERROR, SQLSTATE, and ROW_COUNT, which are updated after
every query, as well as LAST_ERROR_MESSAGE and LAST_ERROR_SQLSTATE,
which are updated only when a query fails. The expected usage of these
is for scripting.
Fabien Coelho, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/alpine.DEB.2.20.1704042158020.12290@lancre
Before, only filters of the form "(<ldapsearchattribute>=<user>)"
could be used to search an LDAP server. Introduce ldapsearchfilter
so that more general filters can be configured using patterns, like
"(|(uid=$username)(mail=$username))" and "(&(uid=$username)
(objectClass=posixAccount))". Also allow search filters to be included
in an LDAP URL.
Author: Thomas Munro
Reviewed-By: Peter Eisentraut, Mark Cave-Ayland, Magnus Hagander
Discussion: https://postgr.es/m/CAEepm=0XTkYvMci0WRubZcf_1am8=gP=7oJErpsUfRYcKF2gwg@mail.gmail.com
This is primarily useful for making tests of this utility more
deterministic, to avoid the complexity of starting pg_receivewal as a
deamon in TAP tests.
While this is less useful than the equivalent pg_recvlogical option,
users can as well use it for example to enforce WAL streaming up to a
end-of-backup position, to save only a minimal amount of WAL.
Use this new option to stream WAL data in a deterministic way within a
new set of TAP tests.
Author: Michael Paquier <michael.paquier@gmail.com>
Index columns are referenced by ordinal number rather than name, e.g.
CREATE INDEX coord_idx ON measured (x, y, (z + t));
ALTER INDEX coord_idx ALTER COLUMN 3 SET STATISTICS 1000;
Incompatibility note for release notes:
\d+ for indexes now also displays Stats Target
Authors: Alexander Korotkov, with contribution by Adrien NAYRAT
Review: Adrien NAYRAT, Simon Riggs
Wordsmith: Simon Riggs
This is not required in SGML, but will be in XML, so this is a step to
prepare for the conversion to XML. (It is still not required to escape
>, but we did it here in some cases for symmetry.)
Add a command-line option to osx/onsgmls calls to warn about unescaped
occurrences in the future.
Author: Alexander Law <exclusion@gmail.com>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
This command acts somewhat like \g, but instead of executing the query
buffer, it merely prints a description of the columns that the query
result would have. (Of course, this still requires parsing the query;
if parse analysis fails, you get an error anyway.) We accomplish this
using an unnamed prepared statement, which should be invisible to psql
users.
Pavel Stehule, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/CAFj8pRBhYVvO34FU=EKb=nAF5t3b++krKt1FneCmR0kuF5m-QA@mail.gmail.com
The parenthesized style has only been used in a few modules. Change
that to use the style that is predominant across the whole tree.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
We already had a psql variable VERSION that shows the verbose form of
psql's own version. Add VERSION_NAME to show the short form (e.g.,
"11devel") and VERSION_NUM to show the numeric form (e.g., 110000).
Also add SERVER_VERSION_NAME and SERVER_VERSION_NUM to show the short and
numeric forms of the server's version. (We'd probably add SERVER_VERSION
with the verbose string if it were readily available; but adding another
network round trip to get it seems too expensive.)
The numeric forms, in particular, are expected to be useful for scripting
purposes, now that psql can do conditional tests.
Fabien Coelho, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/alpine.DEB.2.20.1704020917220.4632@lancre
Commit a445cb92ef removed the default file
names for server-side CRL and CA files, but left them in the docs with a
small note. This removes the note and the previous default names to
clarify, as well as changes mentions of the file names to make it
clearer that they are configurable.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Commit 0e141c0fbb introduced a mechanism
to reduce contention on ProcArrayLock by having a single process clear
XIDs in the procArray on behalf of multiple processes, reducing the
need to hand the lock around. A previous attempt to introduce a similar
mechanism for CLogControlLock in ccce90b398
crashed and burned, but the design problem which resulted in those
failures is believed to have been corrected in this version.
Amit Kapila, with some cosmetic changes by me. See the previous commit
message for additional credits.
Discussion: http://postgr.es/m/CAA4eK1KudxzgWhuywY_X=yeSAhJMT4DwCjroV5Ay60xaeB2Eew@mail.gmail.com
Commit 9915de6c1c changed the default behavior of
DROP_REPLICATION_SLOT so that it would wait until any session holding
the slot active would release it, instead of raising an error. But
users are already depending on the original behavior, so revert to it by
default and add a WAIT option to invoke the new behavior.
Per complaint from Simone Gotti, in
Discussion: https://postgr.es/m/CAEvsy6Wgdf90O6pUvg2wSVXL2omH5OPC-38OD4Zzgk-FXavj3Q@mail.gmail.com
This will be useful for hash partitioning, which needs a way to seed
the hash functions to avoid problems such as a hash index on a hash
partitioned table clumping all values into a small portion of the
bucket space; it's also useful for anything that wants a 64-bit hash
value rather than a 32-bit hash value.
Just in case somebody wants a 64-bit hash value that is compatible
with the existing 32-bit hash values, make the low 32-bits of the
64-bit hash value match the 32-bit hash value when the seed is 0.
Robert Haas and Amul Sul
Discussion: http://postgr.es/m/CA+Tgmoafx2yoJuhCQQOL5CocEi-w_uG4S2xT0EtgiJnPGcHW3g@mail.gmail.com
PG_MODULE_MAGIC has been around since 8.2, with 8.1 long since in EOL,
so remove the mention of #ifdef guards for compiling against pre-8.2
sources from the documentation.
Author: Daniel Gustafsson <daniel@yesql.se>
Previously, the parallel executor logic did reinitialization of shared
state within the ExecReScan code for parallel-aware scan nodes. This is
problematic, because it means that the ExecReScan call has to occur
synchronously (ie, during the parent Gather node's ReScan call). That is
swimming very much against the tide so far as the ExecReScan machinery is
concerned; the fact that it works at all today depends on a lot of fragile
assumptions, such as that no plan node between Gather and a parallel-aware
scan node is parameterized. Another objection is that because ExecReScan
might be called in workers as well as the leader, hacky extra tests are
needed in some places to prevent unwanted shared-state resets.
Hence, let's separate this code into two functions, a ReInitializeDSM
call and the ReScan call proper. ReInitializeDSM is called only in
the leader and is guaranteed to run before we start new workers.
ReScan is returned to its traditional function of resetting only local
state, which means that ExecReScan's usual habits of delaying or
eliminating child rescan calls are safe again.
As with the preceding commit 7df2c1f8d, it doesn't seem to be necessary
to make these changes in 9.6, which is a good thing because the FDW and
CustomScan APIs are impacted.
Discussion: https://postgr.es/m/CAA4eK1JkByysFJNh9M349u_nNjqETuEnY_y1VUc_kJiU0bxtaQ@mail.gmail.com
The formatting of the sidebar element didn't carry over to the new tool
chain. Instead of inventing a whole new way of dealing with it, just
convert the one use to a "note".
As long as PQntuples, PQgetvalue, etc, use "int" for row numbers, we're
pretty much stuck with this limitation. The documentation formerly stated
that the result of PQntuples "might overflow on 32-bit operating systems",
which is just nonsense: that's not where the overflow would happen, and
if you did reach an overflow it would not be on a 32-bit machine, because
you'd have OOM'd long since.
Discussion: https://postgr.es/m/CA+FnnTxyLWyjY1goewmJNxC==HQCCF4fKkoCTa9qR36oRAHDPw@mail.gmail.com
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first. Note the first
entry is only for 9.4.
Our documentation hasn't really caught up with the fact that
non-exclusive backups can now be taken using pg_start_backup and
pg_stop_backup even on standbys. Update, also correcting some
errors introduced by 52f8a59dd9.
Updates to the 9.6 documentation are needed as well, but that
will need a separate patch as some things are different on that
version.
David Steele, reviewed by Robert Haas and Michael Paquier
Discussion: http://postgr.es/m/d4d951b9-89c0-6bc1-b6ff-d0b2dd5a8966@pgmasters.net
Users can still create them themselves. Instead, document Unicode TR 35
collation options for ICU, so users can create all this themselves.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Install language+region combinations even if they are not distinct from
the language's base locale. This gives better long-term stability of
the set of predefined locales and makes the predefined locales less
implementation-dependent and more practical for users.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Periodically while the server is running, and at shutdown, write out a
list of blocks in shared buffers. When the server reaches consistency
-- unfortunatey, we can't do it before that point without breaking
things -- reload those blocks into any still-unused shared buffers.
Mithun Cy and Robert Haas, reviewed and tested by Beena Emerson,
Amit Kapila, Jim Nasby, and Rafia Sabih.
Discussion: http://postgr.es/m/CAD__OugubOs1Vy7kgF6xTjmEqTR4CrGAv8w+ZbaY_+MZeitukw@mail.gmail.com
This became possible by commit
6c2003f8a1. This just makes pg_dump aware
of it and updates the documentation.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Also create PDF bookmarks/ToC entries for subsections of reference
pages. This was a regression from the previous jadetex-based build.
Reported-by: Erik Rijkers <er@xs4all.nl>
Since PostgreSQL 9.6, rolreplication no longer determines whether a role
can run pg_start_backup() and pg_stop_backup(), so remove that.
Add that this attribute determines whether a role can create and drop
replication slots.
Reported-by: Fujii Masao <masao.fujii@gmail.com>
Many places that mentioned only Gather should also mention Gather
Merge, or should be phrased in a more neutral way. Be more clear
about the fact that max_parallel_workers_per_gather affects the number
of workers the planner may want to use. Fix a typo. Explain how
Gather Merge works. Adjust wording around parallel scans to be a bit
more clear. Adjust wording around parallel-restricted operations for
the fact that uncorrelated subplans are no longer restricted.
Patch by me, reviewed by Erik Rijkers
Discussion: http://postgr.es/m/CA+TgmoZsTjgVGn=ei5ht-1qGFKy_m1VgB3d8+Rg304hz91N5ww@mail.gmail.com
Similar to what was fixed in commit 9915de6c1c for replication slots,
but this time it's related to replication origins: DROP SUBSCRIPTION
attempts to drop the replication origin, but that fails if the
replication worker process hasn't yet marked it unused. This causes
failures in the buildfarm:
ERROR: could not drop replication origin with OID 1, in use by PID 34069
Like the aforementioned commit, fix by having the process running DROP
SUBSCRIPTION sleep until the worker marks the the replication origin
struct as free. This uses a condition variable on each replication
origin shmem state struct, so that the session trying to drop can sleep
and expect to be awakened by the process keeping the origin open.
Also fix a SGML markup in the previous commit.
Discussion: https://postgr.es/m/20170808001433.rozlseaf4m2wkw3n@alvherre.pgsql
In commit 9915de6c1c, we introduced a new wait point for replication
slots and incorrectly labelled it as wait event PG_WAIT_LOCK. That's
wrong, so invent an appropriate new wait event instead, and document it
properly.
While at it, fix numerous other problems in the vicinity:
- two different walreceiver wait events were being mixed up in a single
wait event (which wasn't documented either); split it out so that they
can be distinguished, and document the new events properly.
- ParallelBitmapPopulate was documented but didn't exist.
- ParallelBitmapScan was not documented (I think this should be called
"ParallelBitmapScanInit" instead.)
- Logical replication wait events weren't documented
- various symbols had been added in dartboard order in various places.
Put them in alphabetical order instead, as was originally intended.
Discussion: https://postgr.es/m/20170808181131.mu4fjepuh5m75cyq@alvherre.pgsql
Commit 3eefc51053 claimed to make
pg_user_mappings enforce the qualifications user_mapping_options had
been enforcing, but its removal of a longstanding restriction left them
distinct when the current user is the subject of a mapping yet has no
server privileges. user_mapping_options emits no rows for such a
mapping, but pg_user_mappings includes full umoptions. Change
pg_user_mappings to show null for umoptions. Back-patch to 9.2, like
the above commit.
Reviewed by Tom Lane. Reported by Jeff Janes.
Security: CVE-2017-7547
Some authentication methods allowed it, others did not. In the client-side,
libpq does not even try to authenticate with an empty password, which makes
using empty passwords hazardous: an administrator might think that an
account with an empty password cannot be used to log in, because psql
doesn't allow it, and not realize that a different client would in fact
allow it. To clear that confusion and to be be consistent, disallow empty
passwords in all authentication methods.
All the authentication methods that used plaintext authentication over the
wire, except for BSD authentication, already checked that the password
received from the user was not empty. To avoid forgetting it in the future
again, move the check to the recv_password_packet function. That only
forbids using an empty password with plaintext authentication, however.
MD5 and SCRAM need a different fix:
* In stable branches, check that the MD5 hash stored for the user does not
not correspond to an empty string. This adds some overhead to MD5
authentication, because the server needs to compute an extra MD5 hash, but
it is not noticeable in practice.
* In HEAD, modify CREATE and ALTER ROLE to clear the password if an empty
string, or a password hash that corresponds to an empty string, is
specified. The user-visible behavior is the same as in the stable branches,
the user cannot log in, but it seems better to stop the empty password from
entering the system in the first place. Secondly, it is fairly expensive to
check that a SCRAM hash doesn't correspond to an empty string, because
computing a SCRAM hash is much more expensive than an MD5 hash by design,
so better avoid doing that on every authentication.
We could clear the password on CREATE/ALTER ROLE also in stable branches,
but we would still need to check at authentication time, because even if we
prevent empty passwords from being stored in pg_authid, there might be
existing ones there already.
Reported by Jeroen van der Ham, Ben de Graaff and Jelte Fennema.
Security: CVE-2017-7546
Previously, it had no effect. Now, if archive_mode=always, it will
work, and if not, you'll get a warning.
Masahiko Sawada, Michael Paquier, and Robert Haas. The patch as
submitted also changed the behavior so that we would write and remove
history files on standbys, but that seems like material for a separate
patch to me.
Discussion: http://postgr.es/m/CAD21AoC2Xw6M=ZJyejq_9d_iDkReC_=rpvQRw5QsyzKQdfYpkw@mail.gmail.com
Supporting ICU 4.2 seems useful because it ships with CentOS 6.
Versions before ICU 4.6 don't support pkg-config, so document an
installation method without using pkg-config.
In ICU 4.2, ucol_getKeywordsForLocale() sometimes returns values that
will not be accepted by uloc_toLanguageTag(). Skip loading keyword
variants in that version.
Reported-by: Victor Wagner <vitus@wagner.pp.ru>
Per a report from AP, it's not that hard to exhaust the supply of
bitmap pages if you create a table with a hash index and then insert a
few billion rows - and then you start getting errors when you try to
insert additional rows. In the particular case reported by AP,
there's another fix that we can make to improve recycling of overflow
pages, which is another way to avoid the error, but there may be other
cases where this problem happens and that fix won't help. So let's
buy ourselves as much headroom as we can without rearchitecting
anything.
The comments claim that the old limit was 64GB, but it was really
only 32GB, because we didn't use all the bits in the page for bitmap
bits - only the largest power of 2 that could fit after deducting
space for the page header and so forth. Thus, we have 4kB per page
for bitmap bits, not 8kB. The new limit is thus actually 8 times the
old *real* limit but only 4 times the old *purported* limit.
Since this breaks on-disk compatibility, bump HASH_VERSION. We've
already done this earlier in this release cycle, so this doesn't cause
any incremental inconvenience for people using pg_upgrade from
releases prior to v10. However, users who use pg_upgrade to reach
10beta3 or later from 10beta2 or earlier will need to REINDEX any hash
indexes again.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/20170704105728.mwb72jebfmok2nm2@zip.com.au
ALTER USER ... SET did not support all the syntax variants of ALTER ROLE
... SET. Fix that, and to avoid further deviations of this kind, unify
many the grammar rules for ROLE/USER/GROUP commands.
Reported-by: Pavel Golub <pavel@microolap.com>
FlightAware is still maintaining this, and indeed is seemingly being
more active with it than the pgtclng fork is. List both, for the
time being anyway.
In the back branches, also back-port commit e20f679f6 and other
recent updates to the client-interfaces list. I think these are
probably of current interest to users of back branches. I did
not touch the list of externally maintained PLs in the back
branches, though. Those are much more likely to be server version
sensitive, and I don't know which of these PLs work all the way back.
Discussion: https://postgr.es/m/20170730162612.1449.58796@wrigleys.postgresql.org
1024 bits is considered weak these days, but OpenSSL always passes 1024 as
the key length to the tmp_dh callback. All the code to handle other key
lengths is, in fact, dead.
To remedy those issues:
* Only include hard-coded 2048-bit parameters.
* Set the parameters directly with SSL_CTX_set_tmp_dh(), without the
callback
* The name of the file containing the DH parameters is now a GUC. This
replaces the old hardcoded "dh1024.pem" filename. (The files for other
key lengths, dh512.pem, dh2048.pem, etc. were never actually used.)
This is not a new problem, but it doesn't seem worth the risk and churn to
backport. If you care enough about the strength of the DH parameters on
old versions, you can create custom DH parameters, with as many bits as you
wish, and put them in the "dh1024.pem" file.
Per report by Nicolas Guini and Damian Quiroga. Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/CAMxBoUyjOOautVozN6ofzym828aNrDjuCcOTcCquxjwS-L2hGQ@mail.gmail.com
Previously the docs just said "5.8 or later". Experimentation shows
that while you can build on Unix from a git checkout with 5.8.0,
compiling recent PL/Perl requires at least 5.8.1, and you won't be
able to run the TAP tests with less than 5.8.3 because that's when
they added "prove". (I do not have any information on just what the
MSVC build scripts require.)
Since all these versions are quite ancient, let's not split hairs
in the docs, but just say that 5.8.3 is the minimum requirement.
Discussion: https://postgr.es/m/16894.1501392088@sss.pgh.pa.us
If the user modifies a view that has CHECK OPTIONs and this gets
translated into a modification to an underlying relation which happens
to be a foreign table, the check options should be enforced. In the
normal code path, that was happening properly, but it was not working
properly for "direct" modification because the whole operation gets
pushed to the remote side in that case and we never have an option to
enforce the constraint against individual tuples. Fix by disabling
direct modification when there is a need to enforce CHECK OPTIONs.
Etsuro Fujita, reviewed by Kyotaro Horiguchi and by me.
Discussion: http://postgr.es/m/f8a48f54-6f02-9c8a-5250-9791603171ee@lab.ntt.co.jp
The descriptions of PQserverVersion and PQlibVersion hadn't been updated
for the new two-part version-numbering approach. Fix that.
In passing, remove some trailing whitespace elsewhere in the file.
Previously, UNBOUNDED meant no lower bound when used in the FROM list,
and no upper bound when used in the TO list, which was OK for
single-column range partitioning, but problematic with multiple
columns. For example, an upper bound of (10.0, UNBOUNDED) would not be
collocated with a lower bound of (10.0, UNBOUNDED), thus making it
difficult or impossible to define contiguous multi-column range
partitions in some cases.
Fix this by using MINVALUE and MAXVALUE instead of UNBOUNDED to
represent a partition column that is unbounded below or above
respectively. This syntax removes any ambiguity, and ensures that if
one partition's lower bound equals another partition's upper bound,
then the partitions are contiguous.
Also drop the constraint prohibiting finite values after an unbounded
column, and just document the fact that any values after MINVALUE or
MAXVALUE are ignored. Previously it was necessary to repeat UNBOUNDED
multiple times, which was needlessly verbose.
Note: Forces a post-PG 10 beta2 initdb.
Report by Amul Sul, original patch by Amit Langote with some
additional hacking by me.
Discussion: https://postgr.es/m/CAAJ_b947mowpLdxL3jo3YLKngRjrq9+Ej4ymduQTfYR+8=YAYQ@mail.gmail.com
Claiming that NATURAL JOIN is equivalent to CROSS JOIN when there are
no common column names is only strictly correct if it's an inner join;
you can't say e.g. CROSS LEFT JOIN. Better to explain it as meaning
JOIN ON TRUE, instead. Per a suggestion from David Johnston.
Discussion: https://postgr.es/m/CAKFQuwb+mYszQhDS9f_dqRrk1=Pe-S6D=XMkAXcDf4ykKPmgKQ@mail.gmail.com
Also fix two other issues, while we're at it:
* In error message on connection failure, if multiple network addresses
were given as the host option, as in "host=127.0.0.1,127.0.0.2", the
error message printed the address twice.
* If there were many more ports than hostnames, the error message would
always claim that there was one port too many, even if there was more than
one. For example, if you gave 2 hostnames and 5 ports, the error message
claimed that you gave 2 hostnames and 3 ports.
Discussion: https://www.postgresql.org/message-id/10badbc6-4d5a-a769-623a-f7ada43e14dd@iki.fi
Commit e9c81b601 changed this, but missed updating the documentation.
The adjacent claim that we use TAP tests only in src/bin seems pretty
obsolete as well. Minor other copy-editing.
Fujii Masao
Tom Lane
Robert Haas
Simon Riggs
Peter Eisentraut
Alvaro Herrera
Stephen Frost
Magnus Hagander
Dean Rasheed
Noah Misch
Andrew Dunstan
Bruce Momjian
Andres Freund
Michael Meskes
Heikki Linnakangas