Originally, we treated memory context names as potentially variable in
all cases, and therefore always copied them into the context header.
Commit 9fa6f00b1 rethought this a little bit and invented a distinction
between fixed and variable names, skipping the copy step for the former.
But we can make things both simpler and more useful by instead allowing
there to be two parts to a context's identification, a fixed "name" and
an optional, variable "ident". The name supplied in the context create
call is now required to be a compile-time-constant string in all cases,
as it is never copied but just pointed to. The "ident" string, if
wanted, is supplied later. This is needed because typically we want
the ident to be stored inside the context so that it's cleaned up
automatically on context deletion; that means it has to be copied into
the context before we can set the pointer.
The cost of this approach is basically just an additional pointer field
in struct MemoryContextData, which isn't much overhead, and is bought
back entirely in the AllocSet case by not needing a headerSize field
anymore, since we no longer have to cope with variable header length.
In addition, we can simplify the internal interfaces for memory context
creation still further, saving a few cycles there. And it's no longer
true that a custom identifier disqualifies a context from participating
in aset.c's freelist scheme, so possibly there's some win on that end.
All the places that were using non-compile-time-constant context names
are adjusted to put the variable info into the "ident" instead. This
allows more effective identification of those contexts in many cases;
for example, subsidary contexts of relcache entries are now identified
by both type (e.g. "index info") and relname, where before you got only
one or the other. Contexts associated with PL function cache entries
are now identified more fully and uniformly, too.
I also arranged for plancache contexts to use the query source string
as their identifier. This is basically free for CachedPlanSources, as
they contained a copy of that string already. We pay an extra pstrdup
to do it for CachedPlans. That could perhaps be avoided, but it would
make things more fragile (since the CachedPlanSource is sometimes
destroyed first). I suspect future improvements in error reporting will
require CachedPlans to have a copy of that string anyway, so it's not
clear that it's worth moving mountains to avoid it now.
This also changes the APIs for context statistics routines so that the
context-specific routines no longer assume that output goes straight
to stderr, nor do they know all details of the output format. This
is useful immediately to reduce code duplication, and it also allows
for external code to do something with stats output that's different
from printing to stderr.
The reason for pushing this now rather than waiting for v12 is that
it rethinks some of the API changes made by commit 9fa6f00b1. Seems
better for extension authors to endure just one round of API changes
not two.
Discussion: https://postgr.es/m/CAB=Je-FdtmFZ9y9REHD7VsSrnCkiBhsA4mdsLKSPauwXtQBeNA@mail.gmail.com
Performing JIT compilation for deforming gains performance benefits
over unJITed deforming from compile-time knowledge of the tuple
descriptor. Fixed column widths, NOT NULLness, etc can be taken
advantage of.
Right now the JITed deforming is only used when deforming tuples as
part of expression evaluation (and obviously only if the descriptor is
known). It's likely to be beneficial in other cases, too.
By default tuple deforming is JITed whenever an expression is JIT
compiled. There's a separate boolean GUC controlling it, but that's
expected to be primarily useful for development and benchmarking.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Commit eb7ed3f306 enabled unique constraints on partitioned tables,
but one thing that was not working properly is INSERT/ON CONFLICT.
This commit introduces a new node keeps state related to the ON CONFLICT
clause per partition, and fills it when that partition is about to be
used for tuple routing.
Author: Amit Langote, Álvaro Herrera
Reviewed-by: Etsuro Fujita, Pavan Deolasee
Discussion: https://postgr.es/m/20180228004602.cwdyralmg5ejdqkq@alvherre.pgsql
Coverity complained that this check is pointless, and it's right.
There is no case where we'd call ExecutorStart with a null plannedstmt,
and if we did, it'd have crashed before here. Thinko in commit cc415a56d.
In addition to the interpretation of expressions (which back
evaluation of WHERE clauses, target list projection, aggregates
transition values etc) support compiling expressions to native code,
using the infrastructure added in earlier commits.
To avoid duplicating a lot of code, only support emitting code for
cases that are likely to be performance critical. For expression steps
that aren't deemed that, use the existing interpreter.
The generated code isn't great - some architectural changes are
required to address that. But this already yields a significant
speedup for some analytics queries, particularly with WHERE clauses
filtering a lot, or computing multiple aggregates.
Author: Andres Freund
Tested-By: Thomas Munro
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Disable JITing for VALUES() nodes.
VALUES() nodes are only ever executed once. This is primarily helpful
for debugging, when forcing JITing even for cheap queries.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This adds simple cost based plan time decision about whether JIT
should be performed. jit_above_cost, jit_optimize_above_cost are
compared with the total cost of a plan, and if the cost is above them
JIT is performed / optimization is performed respectively.
For that PlannedStmt and EState have a jitFlags (es_jit_flags) field
that stores information about what JIT operations should be performed.
EState now also has a new es_jit field, which can store a
JitContext. When there are no errors the context is released in
standard_ExecutorEnd().
It is likely that the default values for jit_[optimize_]above_cost
will need to be adapted further, but in my test these values seem to
work reasonably.
Author: Andres Freund, with feedback by Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
These values can be obtained from the ModifyTable node which is already
a part of both the ModifyTableState and ExecInsert.
Author: Álvaro Herrera, Amit Langote
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/20180316151303.rml2p5wffn3o6qy6@alvherre.pgsql
We make some changes to ModifyTableState and the EState it uses whenever
we route tuples to partitions; but we weren't restoring properly in all
cases, possibly causing crashes when partitions with different tuple
descriptors are targeted by tuples inserted in the same command.
Refactor some code, creating ExecPrepareTupleRouting, to encapsulate the
needed state changing logic, and have it invoked one level above its
current place (ie. put it in ExecModifyTable instead of ExecInsert);
this makes it all more readable.
Add a test case to exercise this.
We don't support having views as partitions; and since only views can
have INSTEAD OF triggers, there is no point in testing for INSTEAD OF
when processing insertions into a partitioned table. Remove code that
appears to support this (but which is actually never relevant.)
In passing, fix location of some very confusing comments in
ModifyTableState.
Reported-by: Amit Langote
Author: Etsuro Fujita, Amit Langote
Discussion: https://postgr/es/m/0473bf5c-57b1-f1f7-3d58-455c2230bc5f@lab.ntt.co.jp
"UPDATE/DELETE WHERE CURRENT OF cursor_name" failed, with an error message
like "cannot extract system attribute from virtual tuple", if the cursor
was using a index-only scan for the target table. Fix it by digging the
current TID out of the indexscan state.
It seems likely that the same failure could occur for CustomScan plans
and perhaps some FDW plan types, so that leaving this to be treated as an
internal error with an obscure message isn't as good an idea as it first
seemed. Hence, add a bit of heaptuple.c infrastructure to let us deliver
a more on-topic message. I chose to make the message match what you get
for the case where execCurrentOf can't identify the target scan node at
all, "cursor "foo" is not a simply updatable scan of table "bar"".
Perhaps it should be different, but we can always adjust that later.
In the future, it might be nice to provide hooks that would let custom
scan providers and/or FDWs deal with this in other ways; but that's
not a suitable topic for a back-patchable bug fix.
It's been like this all along, so back-patch to all supported branches.
Yugo Nagata and Tom Lane
Discussion: https://postgr.es/m/20180201013349.937dfc5f.nagata@sraoss.co.jp
ExecHashTableCreate allocated some memory that wasn't freed by
ExecHashTableDestroy, specifically the per-hash-key function information.
That's not a huge amount of data, but if one runs a query that repeats
a hash join enough times, it builds up. Fix by arranging for the data
in question to be kept in the hashtable's hashCxt instead of leaving it
"loose" in the query-lifespan executor context. (This ensures that we'll
also clean up anything that the hash functions allocate in fn_mcxt.)
Per report from Amit Khandekar. It's been like this forever, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAJ3gD9cFofAWGvcxLOxDHC=B0hjtW8yGmUsF2hdGh97CM38=7g@mail.gmail.com
In a top-level CALL, the values of INOUT arguments will be returned as a
result row. In PL/pgSQL, the values are assigned back to the input
arguments. In other languages, the same convention as for return a
record from a function is used. That does not require any code changes
in the PL implementations.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Since edd44738bc WCO expressions of partitioned tables are
initialized with the first subplan as parent. That's not correct, as
the correct context is the ModifyTableState node. That's also what is
used for RETURNING processing, initialized nearby.
This appears not to cause any visible problems for in core code, but
is problematic for in development patch.
Discussion: https://postgr.es/m/20180303043818.tnvlo243bgy7una3@alap3.anarazel.de
The new column distinguishes normal functions, procedures, aggregates,
and window functions. This replaces the existing columns proisagg and
proiswindow, and replaces the convention that procedures are indicated
by prorettype == 0. Also change prorettype to be VOIDOID for procedures.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Parallel-aware plan nodes must be prepared to run without parallelism
if it's not possible at execution time for whatever reason. Commit
ab72716778, which introduced Parallel
Append, overlooked this.
Rajkumar Raghuwanshi reported this problem, and I included his test
case in this patch. The code changes are by me.
Discussion: http://postgr.es/m/CAKcux6=WqkUudLg1GLZZ7fc5ScWC1+Y9qD=pAHeqy32WoeJQvw@mail.gmail.com
Tom Kazimiers reported that transition tables don't work correctly when
they are scanned by more than one executor node. That's because commit
18ce3a4ab allocated separate read pointers for each executor node, as it
must, but failed to make them active at the appropriate times. Repair.
Thomas Munro
Discussion: https://postgr.es/m/20180224034748.bixarv6632vbxgeb%40dewberry.localdomain
It's not necessary to fully initialize the executor data structures
for partitions to which no tuples are ever routed. Consider, for
example, an INSERT statement that inserts only one row: it only cares
about the partition to which that one row is routed. The new function
ExecInitPartitionInfo performs the initialization in question only
when a particular partition is about to receive a tuple. This includes
creating, validating, and saving a pointer to the ResultRelInfo,
setting up for speculative insertions, translating WCOs and
initializing the resulting expressions, translating returning lists
and building the appropriate projection information, and setting up a
tuple conversion map.
One thing that's not deferred is locking the child partitions; that
seems desirable but would need more thought. Still, testing shows
that this makes single-row inserts significantly faster on a table
with many partitions without harming the bulk-insert case.
Amit Langote, reviewed by Etsuro Fujita, with a few changes by me
Discussion: http://postgr.es/m/8975331d-d961-cbdd-f862-fdd3d97dc2d0@lab.ntt.co.jp
An updating query that reads a CTE within an InitPlan or SubPlan could get
incorrect results if it updates rows that are concurrently being modified.
This is caused by CteScanNext supposing that nothing inside its recursive
ExecProcNode call could change which read pointer is selected in the CTE's
shared tuplestore. While that's normally true because of scoping
considerations, it can break down if an EPQ plan tree gets built during the
call, because EvalPlanQualStart builds execution trees for all subplans
whether they're going to be used during the recheck or not. And it seems
like a pretty shaky assumption anyway, so let's just reselect our own read
pointer here.
Per bug #14870 from Andrei Gorita. This has been broken since CTEs were
implemented, so back-patch to all supported branches.
Discussion: https://postgr.es/m/20171024155358.1471.82377@wrigleys.postgresql.org
In what was doubtless a typo, commit bf6c614a2 introduced a duplicate
initialization of a local variable. This made Coverity unhappy, as well
as pretty much anybody reading the code. We don't even have a real use
for the local variable, so just remove it.
The reason for doing so is that it will allow expression evaluation to
optimize based on the underlying tupledesc. In particular it will
allow to JIT tuple deforming together with the expression itself.
For that expression initialization needs to be moved after the
relevant slots are initialized - mostly unproblematic, except in the
case of nodeWorktablescan.c.
After doing so there's no need for ExecAssignResultType() and
ExecAssignResultTypeFromTL() anymore, as all former callers have been
converted to create a slot with a fixed descriptor.
When creating a slot with a fixed descriptor, tts_values/isnull can be
allocated together with the main slot, reducing allocation overhead
and increasing cache density a bit.
Author: Andres Freund
Discussion: https://postgr.es/m/20171206093717.vqdxe5icqttpxs3p@alap3.anarazel.de
This has a performance benefit on own, although not hugely so. The
primary benefit is that it will allow for to JIT tuple deforming and
comparator invocations.
Large parts of this were previously committed (773aec7aa), but the
commit contained an omission around cross-type comparisons and was
thus reverted.
Author: Andres Freund
Discussion: https://postgr.es/m/20171129080934.amqqkke2zjtekd4t@alap3.anarazel.de
This reverts commit 773aec7aa9.
There's an unresolved issue in the reverted commit: It only creates
one comparator function, but in for the nodeSubplan.c case we need
more (c.f. FindTupleHashEntry vs LookupTupleHashEntry calls in
nodeSubplan.c).
This isn't too difficult to fix, but it's not entirely trivial
either. The fact that the issue only causes breakage on 32bit systems
shows that the current test coverage isn't that great. To avoid
turning half the buildfarm red till those two issues are addressed,
revert.
Formerly, DTYPE_REC was used only for variables declared as "record";
variables of named composite types used DTYPE_ROW, which is faster for
some purposes but much less flexible. In particular, the ROW code paths
are entirely incapable of dealing with DDL-caused changes to the number
or data types of the columns of a row variable, once a particular plpgsql
function has been parsed for the first time in a session. And, since the
stored representation of a ROW isn't a tuple, there wasn't any easy way
to deal with variables of domain-over-composite types, since the domain
constraint checking code would expect the value to be checked to be a
tuple. A lesser, but still real, annoyance is that ROW format cannot
represent a true NULL composite value, only a row of per-field NULL
values, which is not exactly the same thing.
Hence, switch to using DTYPE_REC for all composite-typed variables,
whether "record", named composite type, or domain over named composite
type. DTYPE_ROW remains but is used only for its native purpose, to
represent a fixed-at-compile-time list of variables, for instance the
targets of an INTO clause.
To accomplish this without taking significant performance losses, introduce
infrastructure that allows storing composite-type variables as "expanded
objects", similar to the "expanded array" infrastructure introduced in
commit 1dc5ebc90. A composite variable's value is thereby kept (most of
the time) in the form of separate Datums, so that field accesses and
updates are not much more expensive than they were in the ROW format.
This holds the line, more or less, on performance of variables of named
composite types in field-access-intensive microbenchmarks, and makes
variables declared "record" perform much better than before in similar
tests. In addition, the logic involved with enforcing composite-domain
constraints against updates of individual fields is in the expanded
record infrastructure not plpgsql proper, so that it might be reusable
for other purposes.
In further support of this, introduce a typcache feature for assigning a
unique-within-process identifier to each distinct tuple descriptor of
interest; in particular, DDL alterations on composite types result in a new
identifier for that type. This allows very cheap detection of the need to
refresh tupdesc-dependent data. This improves on the "tupDescSeqNo" idea
I had in commit 687f096ea: that assigned identifying sequence numbers to
successive versions of individual composite types, but the numbers were not
unique across different types, nor was there support for assigning numbers
to registered record types.
In passing, allow plpgsql functions to accept as well as return type
"record". There was no good reason for the old restriction, and it
was out of step with most of the other PLs.
Tom Lane, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/8962.1514399547@sss.pgh.pa.us
Doing so causes EXPLAIN ANALYZE to show trigger statistics multiple
times. Commit 2f17844104 seems to
be to blame for this.
Amit Langote, revieed by Amit Khandekar, Etsuro Fujita, and me.
When the previously-chosen plan was non-partial, all pa_finished
flags for partial plans are now set, and pa_next_plan has not yet
been set to INVALID_SUBPLAN_INDEX, the previous code could go into
an infinite loop.
Report by Rajkumar Raghuwanshi. Patch by Amit Khandekar and me.
Review by Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CAJ3gD9cf43z78qY=U=H0HvOEN341qfRO-vLpnKPSviHeWgJQ5w@mail.gmail.com
This patch adds the ability to use "RANGE offset PRECEDING/FOLLOWING"
frame boundaries in window functions. We'd punted on that back in the
original patch to add window functions, because it was not clear how to
do it in a reasonably data-type-extensible fashion. That problem is
resolved here by adding the ability for btree operator classes to provide
an "in_range" support function that defines how to add or subtract the
RANGE offset value. Factoring it this way also allows the operator class
to avoid overflow problems near the ends of the datatype's range, if it
wishes to expend effort on that. (In the committed patch, the integer
opclasses handle that issue, but it did not seem worth the trouble to
avoid overflow failures for datetime types.)
The patch includes in_range support for the integer_ops opfamily
(int2/int4/int8) as well as the standard datetime types. Support for
other numeric types has been requested, but that seems like suitable
material for a follow-on patch.
In addition, the patch adds GROUPS mode which counts the offset in
ORDER-BY peer groups rather than rows, and it adds the frame_exclusion
options specified by SQL:2011. As far as I can see, we are now fully
up to spec on window framing options.
Existing behaviors remain unchanged, except that I changed the errcode
for a couple of existing error reports to meet the SQL spec's expectation
that negative "offset" values should be reported as SQLSTATE 22013.
Internally and in relevant parts of the documentation, we now consistently
use the terminology "offset PRECEDING/FOLLOWING" rather than "value
PRECEDING/FOLLOWING", since the term "value" is confusingly vague.
Oliver Ford, reviewed and whacked around some by me
Discussion: https://postgr.es/m/CAGMVOdu9sivPAxbNN0X+q19Sfv9edEPv=HibOJhB14TJv_RCQg@mail.gmail.com
We don't need to set up the shared space for hash join instrumentation data
if instrumentation hasn't been requested. Let's follow the example of the
similar Sort node code and save a few cycles by skipping that when we can.
This reverts commit d59ff4ab3 and instead allows us to use the safer choice
of passing noError = false to shm_toc_lookup in ExecHashInitializeWorker,
since if we reach that call there should be a TOC entry to be found.
Thomas Munro
Discussion: https://postgr.es/m/E1ehkoZ-0005uW-43%40gemulon.postgresql.org
One or another author of commit 5bcf389ec seems to have thought that
computing an offset from a NULL pointer would yield another NULL pointer.
There may possibly be architectures where that works, but common machines
don't work like that. Per a quick code review of places calling
shm_toc_lookup and not using noError = false.
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
Once this function has been called, we know that all workers have
started and attached to their error queues -- so if any of them
subsequently exit uncleanly, we'll be sure to throw an ERROR promptly.
Otherwise, users of the ParallelContext machinery must be careful not
to wait forever for a worker that has failed to start. Parallel query
manages to work without needing this for reasons explained in new
comments added by this patch, but it's a useful primitive for other
parallel operations, such as the pending patch to make creating a
btree index run in parallel.
Amit Kapila, revised by me. Additional review by Peter Geoghegan.
Discussion: http://postgr.es/m/CAA4eK1+e2MzyouF5bg=OtyhDSX+=Ao=3htN=T-r_6s3gCtKFiw@mail.gmail.com
It's a common task to evaluate a qual and reset the corresponding
expression context. Currently that requires storing the result of the
qual eval, resetting the context, and then reacting on the result. As
that's awkward several places only reset the context next time through
a node. That's not great, so introduce a helper that evaluates and
resets.
It's a bit ugly that it currently uses MemoryContextReset() instead of
ResetExprContext(), but that seems easier than reordering all of
executor.h.
Author: Andres Freund
Discussion: https://postgr.es/m/20180109222544.f7loxrunqh3xjl5f@alap3.anarazel.de
ExecPushExprSlots didn't initialize ExprEvalStep's resvalue/resnull
steps as it didn't use them. That caused wrong valgrind warnings for
an upcoming patch, so zero-intialize.
Also zero-initialize all scratch ExprEvalStep's allocated on the
stack, to avoid issues with similar future omissions of non-critial
data.
The changes in b81b5a96f4 did not fully
address the issue, because the bit-mixing of the IV into the final
hash-key didn't prevent clustering in the input-data survive in the
output data.
This didn't cause a lot of problems because of the additional growth
conditions added d4c62a6b62. But as we
want to rein those in due to explosive growth in some edges, this
needs to be fixed.
Author: Andres Freund
Discussion: https://postgr.es/m/20171127185700.1470.20362@wrigleys.postgresql.org
Backpatch: 10, where simplehash was introduced
Commit 09529a70b changed nodeIndexscan.c and nodeIndexonlyscan.c to
postpone initialization of the indexscan proper until the first tuple
fetch. It overlooked the question of mark/restore behavior, which means
that if some caller attempts to mark the scan before the first tuple fetch,
you get a null pointer dereference.
The only existing user of mark/restore is nodeMergejoin.c, which (somewhat
accidentally) will never attempt to set a mark before the first inner tuple
unless the inner child node is a Material node. Hence the case can't arise
normally, so it seems sufficient to document the assumption at both ends.
However, during an EvalPlanQual recheck, ExecScanFetch doesn't call
IndexNext but just returns the jammed-in test tuple. Therefore, if we're
doing a recheck in a plan tree with a mergejoin with inner indexscan,
it's possible to reach ExecIndexMarkPos with iss_ScanDesc still null,
as reported by Guo Xiang Tan in bug #15032.
Really, when there's a test tuple supplied during an EPQ recheck, touching
the index at all is the wrong thing: rather, the behavior of mark/restore
ought to amount to saving and restoring the es_epqScanDone flag. We can
avoid finding a place to actually save the flag, for the moment, because
given the assumption that no caller will set a mark before fetching a
tuple, es_epqScanDone must always be set by the time we try to mark.
So the actual behavior change required is just to not reach the index
access if a test tuple is supplied.
The set of plan node types that need to consider this issue are those
that support EPQ test tuples (i.e., call ExecScan()) and also support
mark/restore; which is to say, IndexScan, IndexOnlyScan, and perhaps
CustomScan. It's tempting to try to fix the problem in one place by
teaching ExecMarkPos() itself about EPQ; but ExecMarkPos supports some
plan types that aren't Scans, and also it seems risky to make assumptions
about what a CustomScan wants to do here. Also, the most likely future
change here is to decide that we do need to support marks placed before
the first tuple, which would require additional work in IndexScan and
IndexOnlyScan in any case. Hence, fix the EPQ issue in nodeIndexscan.c
and nodeIndexonlyscan.c, accepting the small amount of code duplicated
thereby, and leave it to CustomScan providers to fix this bug if they
have it.
Back-patch to v10 where commit 09529a70b came in. In earlier branches,
the index_markpos() call is a waste of cycles when EPQ is active, but
no more than that, so it doesn't seem appropriate to back-patch further.
Discussion: https://postgr.es/m/20180126074932.3098.97815@wrigleys.postgresql.org
Avoid compiler warnings on MSVC (which doesn't want to see both
__forceinline and inline) and ancient GCC (which doesn't have
__attribute__((always_inline))).
Don't force inline-ing when building at -O0, as the programmer is probably
hoping for exact source-to-object-line correspondence in that case.
(For the moment this only works for GCC; maybe we can extend it later.)
Make pg_attribute_always_inline be syntactically a drop-in replacement
for inline, rather than an additional wart.
And improve the comments.
Thomas Munro and Michail Nikolaev, small tweaks by me
Discussion: https://postgr.es/m/32278.1514863068@sss.pgh.pa.us
Discussion: https://postgr.es/m/CANtu0oiYp74brgntKOxgg1FK5+t8uQ05guSiFU6FYz_5KUhr6Q@mail.gmail.com
In each of the supplied procedural languages (PL/pgSQL, PL/Perl,
PL/Python, PL/Tcl), add language-specific commit and rollback
functions/commands to control transactions in procedures in that
language. Add similar underlying functions to SPI. Some additional
cleanup so that transaction commit or abort doesn't blow away data
structures still used by the procedure call. Add execution context
tracking to CALL and DO statements so that transaction control commands
can only be issued in top-level procedure and block calls, not function
calls or other procedure or block calls.
- SPI
Add a new function SPI_connect_ext() that is like SPI_connect() but
allows passing option flags. The only option flag right now is
SPI_OPT_NONATOMIC. A nonatomic SPI connection can execute transaction
control commands, otherwise it's not allowed. This is meant to be
passed down from CALL and DO statements which themselves know in which
context they are called. A nonatomic SPI connection uses different
memory management. A normal SPI connection allocates its memory in
TopTransactionContext. For nonatomic connections we use PortalContext
instead. As the comment in SPI_connect_ext() (previously SPI_connect())
indicates, one could potentially use PortalContext in all cases, but it
seems safest to leave the existing uses alone, because this stuff is
complicated enough already.
SPI also gets new functions SPI_start_transaction(), SPI_commit(), and
SPI_rollback(), which can be used by PLs to implement their transaction
control logic.
- portalmem.c
Some adjustments were made in the code that cleans up portals at
transaction abort. The portal code could already handle a command
*committing* a transaction and continuing (e.g., VACUUM), but it was not
quite prepared for a command *aborting* a transaction and continuing.
In AtAbort_Portals(), remove the code that marks an active portal as
failed. As the comment there already predicted, this doesn't work if
the running command wants to keep running after transaction abort. And
it's actually not necessary, because pquery.c is careful to run all
portal code in a PG_TRY block and explicitly runs MarkPortalFailed() if
there is an exception. So the code in AtAbort_Portals() is never used
anyway.
In AtAbort_Portals() and AtCleanup_Portals(), we need to be careful not
to clean up active portals too much. This mirrors similar code in
PreCommit_Portals().
- PL/Perl
Gets new functions spi_commit() and spi_rollback()
- PL/pgSQL
Gets new commands COMMIT and ROLLBACK.
Update the PL/SQL porting example in the documentation to reflect that
transactions are now possible in procedures.
- PL/Python
Gets new functions plpy.commit and plpy.rollback.
- PL/Tcl
Gets new commands commit and rollback.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
When an UPDATE causes a row to no longer match the partition
constraint, try to move it to a different partition where it does
match the partition constraint. In essence, the UPDATE is split into
a DELETE from the old partition and an INSERT into the new one. This
can lead to surprising behavior in concurrency scenarios because
EvalPlanQual rechecks won't work as they normally did; the known
problems are documented. (There is a pending patch to improve the
situation further, but it needs more review.)
Amit Khandekar, reviewed and tested by Amit Langote, David Rowley,
Rajkumar Raghuwanshi, Dilip Kumar, Amul Sul, Thomas Munro, Álvaro
Herrera, Amit Kapila, and me. A few final revisions by me.
Discussion: http://postgr.es/m/CAJ3gD9do9o2ccQ7j7+tSgiE1REY65XRiMb=yJO3u3QhyP8EEPQ@mail.gmail.com
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
node->partitioned_rels is only set in UPDATE/DELETE cases, but
ExecInitModifyTable only uses its "rel" variable in INSERT cases,
so the extra logic to find the root rel is just a waste of complexity
and cycles.
Etsuro Fujita, reviewed by Amit Langote
Discussion: https://postgr.es/m/93cf9816-2f7d-0f67-8ed2-4a4e497a6ab8@lab.ntt.co.jp
PL/pgSQL "pins" internally generated (unnamed) portals so that user code
cannot close them by guessing their names. This logic is also useful in
other languages and really for any code. So move that logic into SPI.
An unnamed portal obtained through SPI_cursor_open() and related
functions is now automatically pinned, and SPI_cursor_close()
automatically unpins a portal that is pinned.
In the core distribution, this affects PL/Perl and PL/Python, preventing
users from manually closing cursors created by spi_query and
plpy.cursor, respectively. (PL/Tcl does not currently offer any cursor
functionality.)
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Previously aggregate transition and combination functions were invoked
by special case code in nodeAgg.c, evaluating input and filters
separately using the expression evaluation machinery. That turns out
to not be great for performance for several reasons:
- repeated expression evaluations have some cost
- the transition functions invocations are poorly predicted, as
commonly there are multiple aggregates in a query, resulting in the
same call-stack invoking different functions.
- filter and input computation had to be done separately
- the special case code made it hard to implement JITing of the whole
transition function invocation
Address this by building one large expression that computes input,
evaluates filters, and invokes transition functions.
This leads to moderate speedups in queries bottlenecked by aggregate
computations, and enables large speedups for similar cases once JITing
is done.
There's potential for further improvement:
- It'd be nice if we could simplify the somewhat expensive
aggstate->all_pergroups lookups.
- right now there's still an advance_transition_function invocation in
nodeAgg.c, leading to some code duplication.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Tom Lane
Andres Freund
Alvaro Herrera
Peter Eisentraut
Stephen Frost
Robert Haas