On fast machines, it's possible for applications such as pgbench
to issue connection requests so quickly that the postmaster's
listen queue overflows in the kernel, resulting in unexpected
failures (with not-very-helpful error messages). Most modern OSes
allow the queue size to be increased, so document how to do that.
Per report from Kevin McKibbin.
Discussion: https://postgr.es/m/CADc_NKg2d+oZY9mg4DdQdoUcGzN2kOYXBu-3--RW_hEe0tUV=g@mail.gmail.com
sysctl is more portable than Linux's /proc/sys file tree, and
often easier to use too. That's why most of our docs refer to
sysctl when talking about how to adjust kernel parameters.
Bring the few stragglers into line.
Discussion: https://postgr.es/m/361175.1661187463@sss.pgh.pa.us
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
As usual, the release notes for older branches will be made by cutting
these down, but put them up for community review first.
Due to the out-of-cycle release of 14.4, there are a number of commits
that appeared in 14.4 that are not yet shipped in the earlier branches.
This draft repeats those release note entries for convenience in
preparing the older-branch notes later. They'll be stripped out of
the 14.5 section after that's done.
This is a backpatch to branches 10-14 of the following commits:
7170f2159f Allow "in place" tablespaces.
c6f2f01611 Fix pg_basebackup with in-place tablespaces.
f6f0db4d62 Fix pg_tablespace_location() with in-place tablespaces
7a7cd84893 doc: Remove mention to in-place tablespaces for pg_tablespace_location()
5344723755 Remove unnecessary Windows-specific basebackup code.
In-place tablespaces were introduced as a testing helper mechanism, but
they are going to be used for a bugfix in WAL replay to be backpatched
to all stable branches.
I (Álvaro) had to adjust some code to account for lack of
get_dirent_type() in branches prior to 14.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Michaël Paquier <michael@paquier.xyz>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20220722081858.omhn2in5zt3g4nek@alvherre.pgsql
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
We didn't explicitly say that random() uses a randomly-chosen seed
if you haven't called setseed(). Do so.
Also, remove ref/set.sgml's no-longer-accurate (and never very
relevant) statement that the seed value is multiplied by 2^31-1.
Back-patch to v12 where set.sgml's claim stopped being true.
The claim that we use a source of random bits as seed was debatable
before 4203842a1, too, so v12 seems like a good place to stop.
Per question from Carl Sopchak.
Discussion: https://postgr.es/m/f37bb937-9d99-08f0-4de7-80c91a3cfc2e@sopchak.me
SPI_commit previously left it up to the caller to recover from any error
occurring during commit. Since that's complicated and requires use of
low-level xact.c facilities, it's not too surprising that no caller got
it right. Let's move the responsibility for cleanup into spi.c. Doing
that requires redefining SPI_commit as starting a new transaction, so
that it becomes equivalent to SPI_commit_and_chain except that you get
default transaction characteristics instead of preserving the prior
transaction's characteristics. We can make this pretty transparent
API-wise by redefining SPI_start_transaction() as a no-op. Callers
that expect to do something in between might be surprised, but
available evidence is that no callers do so.
Having made that API redefinition, we can fix this mess by having
SPI_commit[_and_chain] trap errors and start a new, clean transaction
before re-throwing the error. Likewise for SPI_rollback[_and_chain].
Some cleanup is also needed in AtEOXact_SPI, which was nowhere near
smart enough to deal with SPI contexts nested inside a committing
context.
While plperl and pltcl need no changes beyond removing their now-useless
SPI_start_transaction() calls, plpython needs some more work because it
hadn't gotten the memo about catching commit/rollback errors in the
first place. Such an error resulted in longjmp'ing out of the Python
interpreter, which leaks Python stack entries at present and is reported
to crash Python 3.11 altogether. Add the missing logic to catch such
errors and convert them into Python exceptions.
This is a back-patch of commit 2e517818f. That's now aged long enough
to reduce the concerns about whether it will break something, and we
do need to ensure that supported branches will work with Python 3.11.
Peter Eisentraut and Tom Lane
Discussion: https://postgr.es/m/3375ffd8-d71c-2565-e348-a597d6e739e3@enterprisedb.com
Discussion: https://postgr.es/m/17416-ed8fe5d7213d6c25@postgresql.org
The previous wording was "the underlying data type's default collation
is used", which is wrong or at least misleading. The domain inherits
the base type's collation behavior, which if "default" actually can
mean that we use some non-default collation obtained from elsewhere.
Per complaint from Jian He.
Discussion: https://postgr.es/m/CACJufxHMR8_4WooDPjjvEdaxB2hQ5a49qthci8fpKP0MKemVRQ@mail.gmail.com
This reverts commits a04ccf6df et al. in the back branches only.
There was some disagreement already over whether to back-patch
157f8739a, on the grounds that it is the sort of behavioral
change that we don't like to back-patch. Furthermore, it now
looks like the logic needs some more work, which we don't have
time for before the upcoming 14.4 release. Revert for now, and
perhaps reconsider later.
Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org
The patch introducing jsonpath dropped a para about that between
two related examples, and didn't bother updating the introductory
sentences that it falsified. The grammar was pretty shaky as well.
psql --single-transaction is able to handle multiple -c and -f switches
in a single transaction since d5563d7d, but this had the surprising
behavior of forcing a transaction COMMIT even if psql failed with an
error in the client (for example incorrect path given to \copy), which
would generate an error, but still commit any changes that were already
applied in the backend. This commit makes the behavior more consistent,
by enforcing a transaction ROLLBACK if any commands fail, both
client-side and backend-side, so as no changes are applied if one error
happens in any of them.
Some tests are added on HEAD to provide some coverage about all that.
Backend-side errors are unreliable as IPC::Run can complain on SIGPIPE
if psql quits before reading a query result, but that should work
properly in the case where any errors come from psql itself, which is
what the original report is about.
Reported-by: Christoph Berg
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org
Backpatch-through: 10
The previous entry invited confusion between what uniq() does
by itself and what it does when combined with sort(). The latter
usage is pretty useful so we should show it, but add an additional
example to clarify the results of uniq() alone.
Per suggestion from Martin Kalcher. Back-patch to v13, where
we switched to formatting that supports multiple examples.
Discussion: https://postgr.es/m/165407884456.573551.8779012279828726162@wrigleys.postgresql.org
The example given for anyelement <@ anymultirange didn't return
true as claimed; adjust it so it does.
In passing, change a couple of sample results where the modern
numeric-based logic produces a different number of trailing zeroes
than before.
Erik Rijkers
Discussion: https://postgr.es/m/cc35735d-1ec1-5bb3-9e27-cddbab7afa23@xs4all.nl
The PostgreSQL limitations section of the documents mentioned the limit
on the number of columns that can exist in a table. Users might be
surprised to find that there's also a limit on the number of columns that
can exist in a targetlist. Users may experience restrictions which
surprise them if they happened to select a large number of columns from
several tables with many columns. Here we document that there is a
limitation on this and mention what that limit actually is.
Wording proposal by Alvaro Herrera
Reported-by: Vladimir Sitnikov
Author: Dave Crammer
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAB=Je-E18aTYpNqje4mT0iEADpeGLSzwUvo3H9kRRuDdsNo4aQ@mail.gmail.com
Backpatch-through: 12, where the limitations section was added
This reverts commit d9d076222f "VACUUM: ignore indexing operations
with CONCURRENTLY".
These changes caused indexes created with the CONCURRENTLY option to
miss heap tuples that were HOT-updated and HOT-pruned during the index
creation. Before these changes, HOT pruning would have been prevented
by the Xmin of the transaction creating the index, but because this
change was precisely to allow the Xmin to move forward ignoring that
backend, now other backends scanning the table can prune them. This is
not a problem for VACUUM (which requires a lock that conflicts with a
CREATE INDEX CONCURRENTLY operation), but HOT-prune can definitely
occur. In other words, Xmin advancement was sped up, but at the cost of
corrupting the resulting index.
Regrettably, this means that the new feature in PG14 that RIC/CIC on
very large tables no longer force VACUUM to retain very old tuples goes
away. We might try to implement it again in a later release, but for
now the risk of indexes missing tuples is too high and there's no easy
fix.
Backpatch to 14, where this change appeared.
Reported-by: Peter Slavov <pet.slavov@gmail.com>
Diagnosys-by: Andrey Borodin <x4mmm@yandex-team.ru>
Diagnosys-by: Michael Paquier <michael@paquier.xyz>
Diagnosys-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/17485-396609c6925b982d%40postgresql.org
runtime.sgml contains a passing reference to the minimum server
version that pg_dump[all] can dump from. That was 7.0 for many
years, but when 64f3524e2 raised it to 8.0, we missed updating this
bit. Then when 30e7c175b raised it to 9.2, we missed it again.
Given that track record, I'm not too hopeful that we'll remember
to fix this in future changes ... but for now, make the docs match
reality in each branch.
Noted by Daniel Westermann.
Discussion: https://postgr.es/m/GV0P278MB041917EB3E2FE8704B5AE2C6D2DC9@GV0P278MB0419.CHEP278.PROD.OUTLOOK.COM
The information generated when track_activities is accessible to
superusers, roles with the privileges of pg_read_all_stats, as well as
roles one has the privileges of. The original text did not outline the
last point, while the change done in ac1ae47 was unclear about the
second point.
Per discussion with Nathan Bossart.
Discussion: https://postgr.es/m/20220521185743.GA886636@nathanxps13
Backpatch-through: 10
The form taking anymultirange had not been documented. This was
fixed in HEAD in b21c4cf95, but that should have been back-patched
to v14 since the function was added there. Do so now.
Also, the form taking anyrange was incorrectly documented as
returning anymultirange, when it returns anyrange.
Remove b21c4cf95 from the v15 release notes, since it no longer
qualifies as new-in-v15.
Noted by Shay Rojansky.
Discussion: https://postgr.es/m/CADT4RqAktzP7t6SFf0Xqm9YhahzvsmxFbzXe-gFOd=+_CHm0JA@mail.gmail.com
Foreign tables can be partitioned, but previous documentation commits
left the syntax synopsis both incomplete and incorrect.
Justin Pryzby and Amit Langote
Discussion: http://postgr.es/m/20220521130922.GX19626@telsasoft.com
The description of track_activities mentioned that it is visible to
superusers and that the information related to the current session can
be seen, without telling about pg_read_all_stats. Roles that are
granted the privileges of pg_read_all_stats can also see this
information, so mention it in the docs.
Author: Ian Barwick
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/CAB8KJ=jhPyYFu-A5r-ZGP+Ax715mUKsMxAGcEQ9Cx_mBAmrPow@mail.gmail.com
Backpatch-through: 10
It wasn't previously mentioned that the index is created as invalid,
which is confusing to new users.
Backpatch to 14 (only because of a conflict in 13).
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reported-by: Lauren Fliksteen <dancernerd32@gmail.com>
Reviewed-by: Rajakavitha Kodhandapani <krajakavitha@gmail.com>
Discussion: https://postgr.es/m/165290238488.670.7500177735573254738@wrigleys.postgresql.org
The documentation didn't specify the name of the per-user service file
on Windows, and extrapolating from the pattern used for other config
files gave the wrong answer. The fact that it isn't consistent with the
others sure seems like a bug, but it's far too late to change that now;
we'd just penalize people who worked it out in the past. So, simply
document the true state of affairs.
In passing, fix some gratuitous differences between the discussions
of the service file and the password file.
Julien Rouhaud, per question from Dominique Devienne.
Backpatch to all supported branches. I (tgl) also chose to back-patch
the part of commit ba356a397 that touched libpq.sgml's description of
the service file --- in hindsight, I'm not sure why I didn't do so at
the time, as it includes some fairly essential information.
Discussion: https://postgr.es/m/CAFCRh-_mdLrh8eYVzhRzu4c8bAFEBn=rwoHOmFJcQOTsCy5nig@mail.gmail.com
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
It's more accurate to say that the query identifier is not shown when
compute_query_id = regress rather than to say it is hidden.
This change (ebf6c5249) appeared in v14, so it makes sense to backpatch
this small adjustment to keep the documents consistent between v14 and
master.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Backpatch-through: 14, where compute_query_id = regress was added
Google seems to like to return textsearch.html for queries about
GIN and GiST indexes, even though it's not a primary reference
for either. It seems likely that that's because those keywords
appear in the page title. Since "GIN and GiST Index Types" is
not a very apposite title for this material anyway, rename the
section in hopes of stopping that.
Also provide explicit links to the GIN and GiST chapters, to help
anyone who finds their way to this page regardless.
Per gripe from Jan Piotrowski. Back-patch to supported branches.
(Unfortunately Google is likely to continue returning the 9.1
version of this page, but improving that situation is a matter
for the www team.)
Discussion: https://postgr.es/m/164978902252.1276550.9330175733459697101@wrigleys.postgresql.org
It's misleading to call the data directory the "synchronized data
directory" when discussing a crash scenario when using pg_rewind's
--no-sync option. Here we just remove the word "synchronized" to avoid
any possible confusion.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Backpatch-through: 12, where --no-sync was added
Remove circular "25.1.5.1. Multixacts And Wraparound" link that
references the section that the link itself appears in. An explanation
of MultiXactId age appears only a few sentences before the link, so
there's no question that the link is superfluous at best.
Oversight in commit d5409295.
Author: Peter Geoghegan <pg@bowt.ie>
Backpatch: 14-
When dealing with partitioned tables, counters for partitioned tables
are not updated when modifying child tables. This means autoanalyze may
not update optimizer statistics for the parent relations, which can
result in poor plans for some queries.
It's worth documenting this limitation, so that people are aware of it
and can take steps to mitigate it (e.g. by setting up a script executing
ANALYZE regularly).
Backpatch to v10. Older branches are affected too, of couse, but we no
longer maintain those.
Author: Justin Pryzby
Reviewed-by: Zhihong Yu, Tomas Vondra
Backpatch-through: 10
Discussion: https://postgr.es/m/20210913035409.GA10647%40telsasoft.com
If we run out of space in the checkpointer sync request queue (which is
hopefully rare on real systems, but common with very small buffer pool),
we wait for it to drain. While waiting, we should report that as a wait
event so that users know what is going on, and also handle postmaster
death, since otherwise the loop might never terminate if the
checkpointer has exited.
Back-patch to 12. Although the problem exists in earlier releases too,
the code is structured differently before 12 so I haven't gone any
further for now, in the absence of field complaints.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
The checkpointer shouldn't ignore its latch. Other backends may be
waiting for it to drain the request queue. Hopefully real systems don't
have a full queue often, but the condition is reached easily when
shared_buffers is small.
This involves defining a new wait event, which will appear in the
pg_stat_activity view often due to spread checkpoints.
Back-patch only to 14. Even though the problem exists in earlier
branches too, it's hard to hit there. In 14 we stopped using signal
handlers for latches on Linux, *BSD and macOS, which were previously
hiding this problem by interrupting the sleep (though not reliably, as
the signal could arrive before the sleep begins; precisely the problem
latches address).
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
ALTER ROUTINE triggers the events ddl_command_start and ddl_command_end,
and DROP ROUTINE triggers sql_drop, ddl_command_start and
ddl_command_end, but this was not mention on the matrix table.
Reported-by: Leslie Lemaire
Discussion: https://postgr.es/m/164647533363.646.5802968483136493025@wrigleys.postgresql.org
Backpatch-through: 11
This change makes libpq apply the same private-key-file ownership
and permissions checks that we have used in the backend since commit
9a83564c5. Namely, that the private key can be owned by either the
current user or root (with different file permissions allowed in the
two cases). This allows system-wide management of key files, which
is just as sensible on the client side as the server, particularly
when the client is itself some application daemon.
Sync the comments about this between libpq and the backend, too.
Back-patch of a59c79564 and 50f03473e into all supported branches.
David Steele
Discussion: https://postgr.es/m/f4b7bc55-97ac-9e69-7398-335e212f7743@pgmasters.net
"regress" is a new mode added to compute_query_id aimed at facilitating
regression testing when a module computing query IDs is loaded into the
backend, like pg_stat_statements. It works the same way as "auto",
meaning that query IDs are computed if a module enables it, except that
query IDs are hidden in EXPLAIN outputs to ensure regression output
stability.
Like any GUCs of the kind (force_parallel_mode, etc.), this new
configuration can be added to an instance's postgresql.conf, or just
passed down with PGOPTIONS at command level. compute_query_id uses an
enum for its set of option values, meaning that this addition ensures
ABI compatibility.
Using this new configuration mode allows installcheck-world to pass when
running the tests on an instance with pg_stat_statements enabled,
stabilizing the test output while checking the paths doing query ID
computations.
Reported-by: Anton Melnikov
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/1634283396.372373993@f75.i.mail.ru
Discussion: https://postgr.es/m/YgHlxgc/OimuPYhH@paquier.xyz
Backpatch-through: 14
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
A very well-informed user might deduce this from what we said already,
but I'd bet against it. Lay it out explicitly.
While here, rewrite the comment about tuple routing to be more
intelligible to an average SQL user.
Per bug #17395 from Alexander Lakhin. Back-patch to v11. (The text
in this area is different in v10 and I'm not sufficiently excited
about this point to adapt the patch.)
Discussion: https://postgr.es/m/17395-8c326292078d1a57@postgresql.org
With Python 3.10, configure spits out warnings about the module
distutils.sysconfig being deprecated and scheduled for removal in
Python 3.12. Change the uses in configure to use the module sysconfig
instead. The logic stays largely the same, although we have to
rely on INCLUDEPY instead of the deprecated get_python_inc function.
Note that sysconfig exists since Python 2.7, so this moves the
minimum required version up from Python 2.6 (or 2.4, before v13).
Also, sysconfig didn't exist in Python 3.1, so the minimum 3.x
version is now 3.2.
Back-patch of commit bd233bdd8 into all supported branches.
In v10, this also includes back-patching v11's beff4bb9c, primarily
because this opinion is clearly out-of-date:
While at it, get rid of the code's assumption that both the major and
minor numbers contain exactly one digit. That will foreseeably be
broken by Python 3.10 in perhaps four or five years. That's far enough
out that we probably don't need to back-patch this.
Peter Eisentraut, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/c74add3c-09c4-a9dd-1a03-a846e5b2fc52@enterprisedb.com
I had a brain fade in commit d32899157, and used 2:30AM as the
example timestamp for both spring-forward and fall-back cases.
But it's not actually ambiguous at all in the fall-back case,
because that transition is from 2AM to 1AM under USA rules.
Fix the example to use 1:30AM, which *is* ambiguous.
Noted while answering a question from Aleksander Alekseev.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2191355.1641828552@sss.pgh.pa.us
The link used in the documentation is dead, and the only options to have
an access to this part of the SQL specification are not free. Like any
other books referred, just remove the link to keep some neutrality but
keep its reference.
Reported-by: Erik Rijkers
Discussion: https://postgr.es/m/989abd7d-af30-ab52-1201-bf0b4f33b872@xs4all.nl
Backpatch-through: 12
catalog/pg_class.h was stating that REPLICA_IDENTITY_INDEX with a
dropped index is equivalent to REPLICA_IDENTITY_DEFAULT. The code tells
a different story, as it is equivalent to REPLICA_IDENTITY_NOTHING.
The behavior exists since the introduction of replica identities, and
fe7fd4e even added tests for this case but I somewhat forgot to fix this
comment.
While on it, this commit reorganizes the documentation about replica
identities on the ALTER TABLE page, and a note is added about the case
of dropped indexes with REPLICA_IDENTITY_INDEX.
Author: Michael Paquier, Wei Wang
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/OS3PR01MB6275464AD0A681A0793F56879E759@OS3PR01MB6275.jpnprd01.prod.outlook.com
Backpatch-through: 10
edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
In commit 791090bd7, I made an effort to fill in documentation
for all geometric operators listed in pg_operator. However,
it now appears that at least some of the omissions may have been
intentional, because some of those operator entries point at
unimplemented stub functions. Remove those from the docs again.
(In HEAD, poly_distance stays, because c5c192d7b just added an
implementation for it.)
Per complaint from Anton Voloshin.
Discussion: https://postgr.es/m/3426566.1638832718@sss.pgh.pa.us
List types numeric and timestamptz, which don't seem to have ever been
included here. Restore bigint, which was no-doubt-accidentally deleted
in v12. Fix some errors, or at least obsolete usages (nobody declares
float arguments as "float8*" anymore, even though they might be that
under the hood). Re-alphabetize. Remove the seeming claim that this
is a complete list of built-in types.
Per question from Oskar Stenberg.
Discussion: https://postgr.es/m/HE1PR03MB2971DE2527ECE1E99D6C19A8F96E9@HE1PR03MB2971.eurprd03.prod.outlook.com
ssl_crl_file and ssl_crl_dir are both used to for client certificate
revocation, not server certificates. The description for the params
could be easily misread to mean the opposite however, as evidenced
by the bugreport leading to this fix. Similarly, expand sslcrl and
and sslcrldir to explicitly mention server certificates. While there
also mention sslcrldir where previously only sslcrl was discussed.
Backpatch down to v10, with the CRL dir fixes down to 14 where they
were introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211202.135441.590555657708629486.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/CABWY_HCBUCjY1EJHrEGePGEaSZ5b29apgTohCyygtsqe_ySYng@mail.gmail.com
Backpatch-through: 10
ATTACHing a table into a partition tree whose root is published using a
publication with publish_via_partition_root set to true does not result in
the table's existing contents being replicated. This happens because
subscriber doesn't consider replicating the newly attached partition as
the root table is already in a 'ready' state.
This behavior was introduced in PG13 (83fd4532a7) where we allowed to
publish partition changes via ancestors.
We can consider fixing this limitation in the future.
Author: Amit Langote
Reviewed-by: Hou Zhijie, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB5716E97F00732B52DC2BBC2594989@OS0PR01MB5716.jpnprd01.prod.outlook.com
Remove the confusing use of ORDER BY in an example materialized
view. It adds nothing to the example, but might encourage
people to follow bad practice. Clarify REFRESH MATERIALIZED
VIEW's note about whether view ordering is retained (it isn't).
Maciek Sakrejda
Discussion: https://postgr.es/m/CAOtHd0D-OvrUU0C=4hX28p4BaSE1XL78BAQ0VcDaLLt8tdUzsg@mail.gmail.com
Clarify that the results of nextval and setval are not guaranteed
persistent until the calling transaction commits. Some people
seem to have drawn the opposite conclusion from the statement that
these functions are never rolled back, so re-word to avoid saying
it quite that way.
Discussion: https://postgr.es/m/CAKU4AWohO=NfM-4KiZWvdc+z3c1C9FrUBR6xnReFJ6sfy0i=Lw@mail.gmail.com
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
The "See also" section on the reference page for CREATE PUBLICATION
didn't match the cross references on CREATE SUBSCRIPTION and their
ALTER counterparts. Fixed by adding an xref to the CREATE and ALTER
SUBSCRIPTION pages. Backpatch down to v10 where CREATE PUBLICATION
was introduced.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAHut+PvGWd3-Ktn96c-z6uq-8TGVVP=TPOkEovkEfntoo2mRhw@mail.gmail.com
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first.
Also as usual for a .1 release, there are some entries here that
are not really relevant for v14 because they already appeared in 14.0.
Those'll be removed later.
The documentation was imprecise about the starting LSN used for WAL
streaming if nothing can be found in the local archive directory
defined with the pg_receivewal command, so be more talkative on this
matter.
Extracted from a larger patch by the same author.
Author: Ronan Dunklau, Michael Paquier
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
Backpatch-through: 10
Avoid calling contrib/amcheck functions with relations that are
unsuitable for checking. Specifically, don't attempt verification of
temporary relations, or indexes whose pg_index entry indicates that the
index is invalid, or not ready.
These relations are not supported by any of the contrib/amcheck
functions, for reasons that are pretty fundamental. For example, the
implementation of REINDEX CONCURRENTLY can add its own "transient"
pg_index entries, which has rather unclear implications for the B-Tree
verification functions, at least in the general case -- so they just
treat it as an error. It falls to the amcheck caller (in this case
pg_amcheck) to deal with the situation at a higher level.
pg_amcheck now simply treats these conditions as additional "visibility
concerns" when it queries system catalogs. This is a little arbitrary.
It seems to have the least problems among any of the available
alternatives.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Bug: #17212
Discussion: https://postgr.es/m/17212-34dd4a1d6bba98bf@postgresql.org
Backpatch: 14-, where pg_amcheck was introduced.
queries.sgml failed to mention the rather important point that
INTERSECT binds more tightly than UNION or EXCEPT. I thought
it could also use more discussion of the role of parentheses
in these constructs.
Per gripe from Christopher Painter-Wakefield.
Discussion: https://postgr.es/m/163338891727.12510.3939775743980651160@wrigleys.postgresql.org
The old URL was HTTP 404 and the git link didn't build. Also update two
other ICU links. If we ever get a good link we will add it back.
Reported-by: Anton Voloshin
Author: Laurenz Albe
Backpatch-through: 10
gist.sgml and xindex.sgml hadn't been fully updated for the
addition of a sortsupport support function (commit 16fa9b2b3).
xindex.sgml also missed that the compress and decompress support
functions are optional, an apparently far older oversight.
In passing, fix gratuitous inconsistencies in wording and
capitalization.
Noted by E. Rogov. Back-patch to v14; the residual issues
before that aren't significant enough to bother with.
Discussion: https://postgr.es/m/163335322905.12519.5711557029494638051@wrigleys.postgresql.org
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
Commit 9868167500 added pg_stat_replication_slots view to monitor
ReorderBuffer stats but mistakenly added it under
"Dynamic Statistics Views" section in the docs whereas it belongs to
"Collected Statistics Views" section.
Author: Amit Kapila
Reviewed-by: Masahiko Sawada
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1Kb5ur=OC-G4cAsqPOjoVe+S8LNw1WmUY8Owasjk8o5WQ@mail.gmail.com
Be a little more vocal about the risks of remote collations not
matching local ones. Actually fixing these risks seems hard,
and I've given up on the idea that it might be back-patchable.
So the best we can do for the back branches is add documentation.
Per discussion of bug #16583 from Jiří Fejfar.
Discussion: https://postgr.es/m/2438715.1632510693@sss.pgh.pa.us
Michael Paquier
Bruce Momjian
Etsuro Fujita
Tom Lane
Daniel Gustafsson
Tatsuo Ishii
John Naylor
Alvaro Herrera
David Rowley
Magnus Hagander
Robert Haas
Peter Geoghegan
Tomas Vondra
Thomas Munro
Amit Kapila
Peter Eisentraut
Heikki Linnakangas