The salt is stored base64-encoded. With the old 10 bytes raw length, it was
always padded to 16 bytes after encoding. We might as well use 12 raw bytes
for the salt, and it's still encoded into 16 bytes.
Similarly for the random nonces, use a raw length that's divisible by 3, so
that there's no padding after base64 encoding. Make the nonces longer while
we're at it. 10 bytes was probably enough to prevent replay attacks, but
there's no reason to be skimpy here.
Per suggestion from Álvaro Hernández Tortosa.
Discussion: https://www.postgresql.org/message-id/df8c6e27-4d8e-5281-96e5-131a4e638fc8@8kdata.com
* Remove is_scram_verifier() function. It was unused.
* Fix sanitize_char() function, used in error messages on protocol
violations, to print bytes >= 0x7F correctly.
* Change spelling of scram_MockSalt() function to be more consistent with
the surroundings.
* Change a few more references to "server proof" to "server signature" that
I missed in commit d981074c24.
Instead, send the same FATAL message as with other password-based
authentication mechanisms. This gives a more user-friendly message:
psql: FATAL: password authentication failed for user "test"
instead of:
psql: error received from server in SASL exchange: invalid-proof
Even before this patch, the server sent that FATAL message, after the
SCRAM-specific "e=invalid-proof" message. But libpq would stop at the
SCRAM error message, and not process the ErrorResponse that would come
after that. We could've taught libpq to check for an ErrorResponse after
failed authentication, but it's simpler to modify the server to send only
the ErrorResponse. The SCRAM specification allows for aborting the
authentication at any point, using an application-defined error mechanism,
like PostgreSQL's ErrorResponse. Using the e=invalid-proof message is
optional.
Reported by Jeff Janes.
Discussion: https://www.postgresql.org/message-id/CAMkU%3D1w3jQ53M1OeNfN8Cxd9O%2BA_9VONJivTbYoYRRdRsLT6vA@mail.gmail.com
This gets rid of the code that issued separate queries to retrieve the
partitioning parent-child relationship, parent partition key, and child
partition bound information. With this patch, the information is
retrieved instead using the queries issued from getTables() and
getInherits(), which is both more efficient than the previous approach
and doesn't require any new code.
Since the partitioning parent-child relationship is now retrieved with
the same old code that handles inheritance, partition attributes receive
a proper flagInhAttrs() treatment (that it didn't receive before), which
is needed so that the inherited NOT NULL constraints are not emitted if
we already emitted it for the parent.
Also, fix a bug in pg_dump's --binary-upgrade code, which caused pg_dump
to emit invalid command to attach a partition to its parent.
Author: Amit Langote, with some additional changes by me.
GiST's getNextNearest() function attempts to pfree the previously-returned
tuple if any (that is, scan->xs_hitup in HEAD, or scan->xs_itup in older
branches). However, if we are rescanning a plan node after ending a
previous scan early, those tuple pointers could be pointing to garbage,
because they would be pointing into the scan's pageDataCxt or queueCxt
which has been reset. In a debug build this reliably results in a crash,
although I think it might sometimes accidentally fail to fail in
production builds.
To fix, clear the pointer field anyplace we reset a context it might
be pointing into. This may be overkill --- I think probably only the
queueCxt case is involved in this bug, so that resetting in gistrescan()
would be sufficient --- but dangling pointers are generally bad news,
so let's avoid them.
Another plausible answer might be to just not bother with the pfree in
getNextNearest(). The reconstructed tuples would go away anyway in the
context resets, and I'm far from convinced that freeing them a bit earlier
really saves anything meaningful. I'll stick with the original logic in
this patch, but if we find more problems in the same area we should
consider that approach.
Per bug #14641 from Denis Smirnov. Back-patch to 9.5 where this
logic was introduced.
Discussion: https://postgr.es/m/20170504072034.24366.57688@wrigleys.postgresql.org
password_encryption was a boolean before version 10, so cope with "on" and
"off".
Also, change the behavior with "plain", to treat it the same as "md5".
We're discussing removing the password_encryption='plain' option from the
server altogether, which will make this the only reasonable choice, but
even if we kept it, it seems best to never send the password in cleartext.
It only produced <row> elements but no wrapping <table> element.
By contrast, cursor_to_xmlschema produced a schema that is now correct
but did not previously match the XML data produced by cursor_to_xml.
In passing, also fix a minor misunderstanding about moving cursors in
the tests related to this.
Reported-by: filip@jirsak.org
Based-on-patch-by: Thomas Munro <thomas.munro@enterprisedb.com>
This removes a test case added by commit b69ec7cc9, which was intended
to exercise a corner case involving the rule used at that time that
materialized views were unpopulated iff they had physical size zero.
We got rid of that rule very shortly later, in commit 1d6c72a55, but
kept the test case. However, because the case now asks what VACUUM
will do to a zero-sized physical file, it would be pretty surprising
if the answer were ever anything but "nothing" ... and if things were
indeed that broken, surely we'd find it out from other tests. Since
the test involves a table that's fairly large by regression-test
standards (100K rows), it's quite slow to run. Dropping it should
save some buildfarm cycles, so let's do that.
Discussion: https://postgr.es/m/32386.1493831320@sss.pgh.pa.us
It's easy to overlook the need for one, and its lack is annoying for the
next developer wanting to create a new test. Rather than expect every
individual command to add the semicolon, just append one automatically.
Discussion: http://postgr.es/m/20170503172746.rwftidszir67sgk7@alvherre.pgsql
tzparse() would attempt to load the "posixrules" timezone database file on
each call. That might seem like it would only be an issue when selecting a
POSIX-style zone name rather than a zone defined in the timezone database,
but it turns out that each zone definition file contains a POSIX-style zone
string and tzload() will call tzparse() to parse that. Thus, when scanning
the whole timezone file tree as we do in the pg_timezone_names view,
"posixrules" was read repetitively for each zone definition file. Fix
that by caching the file on first use within any given process. (We cache
other zone definitions for the life of the process, so there seems little
reason not to cache this one as well.) This probably won't help much in
processes that never run pg_timezone_names, but even one additional SET
of the timezone GUC would come out ahead.
An even worse problem for pg_timezone_names is that pg_open_tzfile()
has an inefficient way of identifying the canonical case of a zone name:
it basically re-descends the directory tree to the zone file. That's not
awful for an individual "SET timezone" operation, but it's pretty horrid
when we're inspecting every zone in the database. And it's pointless too
because we already know the canonical spelling, having just read it from
the filesystem. Fix by teaching pg_open_tzfile() to avoid the directory
search if it's not asked for the canonical name, and backfilling the
proper result in pg_tzenumerate_next().
In combination these changes seem to make the pg_timezone_names view
about 3x faster to read, for me. Since a scan of pg_timezone_names
has up to now been one of the slowest queries in the regression tests,
this should help some little bit for buildfarm cycle times.
Back-patch to all supported branches, not so much because it's likely
that users will care much about the view's performance as because
tracking changes in the upstream IANA timezone code is really painful
if we don't keep all the branches in sync.
Discussion: https://postgr.es/m/27962.1493671706@sss.pgh.pa.us
create_singleton_array() was not really as useful as we perhaps thought
when we added it. It had never accreted more than one call site, and is
only saving a dozen lines of code at that one, which is considerably less
bulk than the function itself. Moreover, because of its insistence on
using the caller's fn_extra cache space, it's arguably a coding hazard.
text_to_array_internal() does not currently use fn_extra in any other way,
but if it did it would be subtly broken, since the conflicting fn_extra
uses could be needed within a single query, in the seldom-tested case that
the field separator varies during the query. The same objection seems
likely to apply to any other potential caller.
The replacement code is a bit uglier, because it hardwires knowledge of
the storage parameters of type TEXT, but it's not like we haven't got
dozens or hundreds of other places that do the same. Uglier seems like
a good tradeoff for smaller, faster, and safer.
Per discussion with Neha Khatri.
Discussion: https://postgr.es/m/CAFO0U+_fS5SRhzq6uPG+4fbERhoA9N2+nPrtvaC9mmeWivxbsA@mail.gmail.com
Due to a missing CommandCounterIncrement() call, parsing of a non-utility
command in an extension script would not see the effects of the immediately
preceding DDL command, unless that command's execution ends with
CommandCounterIncrement() internally ... which some do but many don't.
Report by Philippe Beaudoin, diagnosis by Julien Rouhaud.
Rather remarkably, this bug has evaded detection since extensions were
invented, so back-patch to all supported branches.
Discussion: https://postgr.es/m/2cf7941e-4e41-7714-3de8-37b1a8f74dff@free.fr
Move the OWNER and RENAME clauses to the end, so the interesting
functionality is listed first. This is more typical on nearby reference
pages, whereas the previous order was the order in which the clauses
were added.
ALTER SEQUENCE can do nontransactional changes to the sequence (RESTART
clause) and transactional updates to the pg_sequence catalog (most other
clauses). When just calling RESTART, the code would still needlessly do
a catalog update without any changes. This would entangle that
operation in the concurrency issues of a catalog update (causing either
locking or concurrency errors, depending on how that issue is to be
resolved).
Fix by keeping track during options parsing whether a catalog update is
needed, and skip it if not.
Reported-by: Jason Petersen <jason@citusdata.com>
This goes together with the changes made to enable replication on the
sending side by default (wal_level, max_wal_senders etc) by making the
receiving stadby node also enable it by default.
Huong Dangminh
If the inner relation can be proven unique, that is it can have no more
than one matching row for any row of the outer query, then we might as
well implement the semijoin as a plain inner join, allowing substantially
more freedom to the planner. This is a form of outer join strength
reduction, but it can't be implemented in reduce_outer_joins() because
we don't have enough info about the individual relations at that stage.
Instead do it much like remove_useless_joins(): once we've built base
relations, we can make another pass over the SpecialJoinInfo list and
get rid of any entries representing reducible semijoins.
This is essentially a followon to the inner-unique patch (commit 9c7f5229a)
and makes use of the proof machinery that that patch created. We need only
minor refactoring of innerrel_is_unique's API to support this usage.
Per performance complaint from Teodor Sigaev.
Discussion: https://postgr.es/m/f994fc98-389f-4a46-d1bc-c42e05cb43ed@sigaev.ru
The inner-unique patch (commit 9c7f5229a) supposed that if we're
considering a JOIN_UNIQUE_INNER join path, we can always set inner_unique
for the join, because the inner path produced by create_unique_path should
be unique relative to the outer relation. However, that's true only if
we're considering joining to the whole outer relation --- otherwise we may
be applying only some of the join quals, and so the inner path might be
non-unique from the perspective of this join. Adjust the test to only
believe that we can set inner_unique if we have the whole semijoin LHS on
the outer side.
There is more that can be done in this area, but this commit is only
intended to provide the minimal fix needed to get correct plans.
Per report from Teodor Sigaev. Thanks to David Rowley for preliminary
investigation.
Discussion: https://postgr.es/m/f994fc98-389f-4a46-d1bc-c42e05cb43ed@sigaev.ru
DST law changes in Chile, Haiti, and Mongolia. Historical corrections for
Ecuador, Kazakhstan, Liberia, and Spain.
The IANA crew continue their campaign to replace invented time zone
abbrevations with numeric GMT offsets. This update changes numerous zones
in South America, the Pacific and Indian oceans, and some Asian and Middle
Eastern zones. I kept these abbreviations in the tznames/ data files,
however, so that we will still accept them for input. (We may want to
start trimming those files someday, but I think we should wait for the
upstream dust to settle before deciding what to do.)
In passing, add MESZ (Mitteleuropaeische Sommerzeit) to the tznames lists;
since we accept MEZ (Mitteleuropaeische Zeit) it seems rather strange not
to take the other one. And fix some incorrect, or at least obsolete,
comments that certain abbreviations are not traceable to the IANA data.
Currently only provision for running the bin checks in a single step is
provided for. Now these tests can be run individually, as well as tests
in other locations (e.g. src.test/recover).
Also provide for suppressing unnecessary temp installs by setting the
NO_TEMP_INSTALL environment variable just as the Makefiles do.
Backpatch to 9.4.
After the logical replication launcher was told to wake up at
commit (for example, by a CREATE SUBSCRIPTION command), the flag to wake
up was not reset, so it would be woken up at every following commit as
well. So fix that by resetting the flag.
Also, we don't need to wake up anything if the transaction was rolled
back. Just reset the flag in that case.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
Even though no actual tuples are ever inserted into a partitioned
table (the actual tuples are in the partitions, not the partitioned
table itself), we still need to have a ResultRelInfo for the
partitioned table, or per-statement triggers won't get fired.
Amit Langote, per a report from Rajkumar Raghuwanshi. Reviewed by me.
Discussion: http://postgr.es/m/CAKcux6%3DwYospCRY2J4XEFuVy0L41S%3Dfic7rmkbsU-GXhhSbmBg%40mail.gmail.com
zic no longer mishandles some transitions in January 2038 when it
attempts to work around Qt bug 53071. This fixes a bug affecting
Pacific/Tongatapu that was introduced in zic 2016e. localtime.c
now contains a workaround, useful when loading a file generated by
a buggy zic.
There are assorted cosmetic changes as well, notably relocation
of a bunch of #defines.
Thinko in commit de4389712: this warning message references the wrong
"LogicalRepWorker *" variable. This would often result in a core dump,
but if it didn't, the message would show the wrong subscription OID.
In passing, adjust the message text to format a subscription OID
similarly to how that's done elsewhere in the function; and fix
grammatical issues in some nearby messages.
Per Coverity testing.
Convert the binary_coercible() and physically_coercible() functions from
SQL to plpgsql. It's not that plpgsql is inherently better at doing
queries; if you simply convert the previous single SQL query into one
RETURN expression, it's no faster. The problem with the existing code
is that it fools the plancache into deciding that it's worth re-planning
the query every time, since constant-folding with a concrete value for $2
allows elimination of at least one sub-SELECT. In reality that's using the
planner to do the equivalent of a few runtime boolean tests, causing the
function to run much slower than it should. Splitting the AND/OR logic
into separate plpgsql statements allows each if-expression to acquire a
static plan.
Also, get rid of some uses of obj_description() in favor of explicitly
joining to pg_description, allowing the joins to be optimized better.
(Someday we might improve the SQL-function-inlining logic enough that
this happens automatically, but today is not that day.)
Together, these changes reduce the runtime of the opr_sanity regression
test by about a factor of two on one of my slower machines. They don't
seem to help as much on a fast machine, but this should at least benefit
the buildfarm.
Currently, trying to validate a NO INHERIT constraint on the parent will
search for the constraint in child tables (where it is not supposed to
exist), wrongly causing a "constraint does not exist" error.
Amit Langote, per a report from Hans Buschmann.
Discussion: http://postgr.es/m/20170421184012.24362.19@wrigleys.postgresql.org
Where the footer for an owned serial sequence would say "Owned by", put
something analogous for a sequence belonging to an identity column.
Reported-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
Before restarting a tablesync worker for the same relation, wait
wal_retrieve_retry_interval (currently 5s by default). This avoids
restarting failing workers in a tight loop.
We keep the last start times in a hash table last_start_times that is
separate from the table_states list, because that list is cleared out on
syscache invalidation, which happens whenever a table finishes syncing.
The hash table is kept until all tables have finished syncing.
A future project might be to unify these two and keep everything in one
data structure, but for now this is a less invasive change to accomplish
the original purpose.
For the test suite, set wal_retrieve_retry_interval to its minimum
value, to not increase the test suite run time.
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
* Move computation of SaltedPassword to a separate function from
scram_ClientOrServerKey(). This saves a lot of cycles in libpq, by
computing SaltedPassword only once per authentication. (Computing
SaltedPassword is expensive by design.)
* Split scram_ClientOrServerKey() into two functions. Improves
readability, by making the calling code less verbose.
* Rename "server proof" to "server signature", to better match the
nomenclature used in RFC 5802.
* Rename SCRAM_SALT_LEN to SCRAM_DEFAULT_SALT_LEN, to make it more clear
that the salt can be of any length, and the constant only specifies how
long a salt we use when we generate a new verifier. Also rename
SCRAM_ITERATIONS_DEFAULT to SCRAM_DEFAULT_ITERATIONS, for consistency.
These things caught my eye while working on other upcoming changes.
Declarative partitioning duplicated the TypedTableElement productions,
evidently to remove the need to specify WITH OPTIONS when creating
partitions. Instead, simply make WITH OPTIONS optional in the
TypedTableElement production and remove all of the duplicate
PartitionElement-related productions. This change simplifies the
syntax and makes WITH OPTIONS optional when adding defaults, constraints
or storage parameters to columns when creating either typed tables or
partitions.
Also update pg_dump to no longer include WITH OPTIONS, since it's not
necessary, and update the documentation to reflect that WITH OPTIONS is
now optional.
Earlier commits (56e19d938d and 2bef06d516) make it cheaper to
create a logical slot if not exporting the initial snapshot. If
NOEXPORT_SNAPSHOT is specified, we can skip the overhead, not just
when creating a slot via sql (which can't export snapshots). As
NOEXPORT_SNAPSHOT has only recently been introduced, this shouldn't be
backpatched.
Logical decoding stores historical snapshots on disk, so that logical
decoding can restart without having to reconstruct a snapshot from
scratch (for which the resources are not guaranteed to be present
anymore). These serialized snapshots were also used when creating a
new slot via the walsender interface, which can export a "full"
snapshot (i.e. one that can read all tables, not just catalog ones).
The problem is that the serialized snapshots are only useful for
catalogs and not for normal user tables. Thus the use of such a
serialized snapshot could result in an inconsistent snapshot being
exported, which could lead to queries returning wrong data. This
would only happen if logical slots are created while another logical
slot already exists.
Author: Petr Jelinek
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backport: 9.4, where logical decoding was introduced.
pg_basebackup's child process did not pay any attention to the pipe
from its parent while waiting for input from the source server.
If no server data was arriving, it would only wake up and check the
pipe every standby_message_timeout or so. This creates a problem
since the parent process might determine and send the desired stop
position only after the server has reached end-of-WAL and stopped
sending data. In the src/test/recovery regression tests, the timing
is repeatably such that it takes nearly 10 seconds for the child
process to realize that it should shut down. It's not clear how
often that would happen in real-world cases, but it sure seems like
a bug --- and if the user turns off standby_message_timeout or sets
it very large, the delay could be a lot worse.
To fix, expand the StreamCtl API to allow the pipe input FD to be
passed down to the low-level wait routine, and watch both sockets
when sleeping.
(Note: AFAICS this issue doesn't affect the Windows port, since
it doesn't rely on a pipe to transfer the stop position to the
child thread.)
Discussion: https://postgr.es/m/6456.1493263884@sss.pgh.pa.us
Previously the logical replication launcher stored the last timestamp
when it started the worker, in the local variable "last_start_time",
in order to check whether wal_retrive_retry_interval elapsed since
the last startup of worker. If it has elapsed, the launcher sees
pg_subscription and starts new worker if necessary. This is for
limitting the startup of worker to once a wal_retrieve_retry_interval.
The bug was that the variable "last_start_time" was defined and
always initialized with 0 at the beginning of the launcher's main loop.
So even if it's set to the last timestamp in later phase of the loop,
it's always reset to 0. Therefore the launcher could not check
correctly whether wal_retrieve_retry_interval elapsed since
the last startup.
This patch moves the variable "last_start_time" outside the main loop
so that it will not be reset.
Reviewed-by: Petr Jelinek
Discussion: http://postgr.es/m/CAHGQGwGJrPO++XM4mFENAwpy1eGXKsGdguYv43GUgLgU-x8nTQ@mail.gmail.com