VACUUM FULL and CLUSTER can be used to enforce the use of the existing
compression method of a toastable column if a value currently stored is
compressed with a method that does not match the column's defined
method. The code in charge of decompressing and recompressing toast
values at rewrite left around the detoasted values, causing an
accumulation of memory allocated in TopTransactionContext.
When processing large relations, this could cause the system to run out
of memory. The detoasted values are not needed once their tuple is
rewritten, and this commit ensures that the necessary cleanup happens.
Issue introduced by bbe0a81d. The comments of the area are reordered a
bit while on it.
Reported-by: Andres Freund
Analyzed-by: Andres Freund
Author: Michael Paquier
Reviewed-by: Dilip Kumar
Discussion: https://postgr.es/m/20210521211929.pcehg6f23icwstdb@alap3.anarazel.de
The wraparound failsafe mechanism added by commit 1e55e7d1 handled the
one-pass strategy case (i.e. the "table has no indexes" case) by adding
a dedicated failsafe check. This made up for the fact that the usual
one-pass checks inside lazy_vacuum_all_indexes() cannot ever be reached
during a one-pass strategy VACUUM.
This approach failed to account for two-pass VACUUMs that opt out of
index vacuuming up-front. The INDEX_CLEANUP off case in the only case
that works like that.
Fix this by performing a failsafe check every 4GB during the first scan
of the heap, regardless of the details of the VACUUM. This eliminates
the special case, and will make the failsafe trigger more reliably.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20210424002921.pb3t7h6frupdqnkp@alap3.anarazel.de
The percentage of blocks from the table value reported by autovacuum log
output (following commit 5100010ee4) should never exceed 100% because
it describes the state of the table back when lazy_vacuum() was called.
The value could nevertheless exceed 100% in the event of heap relation
truncation. We failed to compensate for how truncation affects
rel_pages.
Fix the faulty accounting by using the original rel_pages value instead
of the current/final rel_pages value.
Reported-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210423204306.5osfpkt2ggaedyvy@alap3.anarazel.de
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
Previously long was used as the data type for some counters in BufferUsage
and WalUsage. But long is only four byte, e.g., on Windows, and it's entirely
possible to wrap a four byte counter. For example, emitting more than
four billion WAL records in one transaction isn't actually particularly rare.
To avoid the overflows of those counters, this commit changes the data type
of them from long to int64.
Suggested-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20201221211650.k7b53tcnadrciqjo@alap3.anarazel.de
Discussion: https://postgr.es/m/af0964ac-7080-1984-dc23-513754987716@oss.nttdata.com
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
The all_visible_according_to_vm variable's value is inherently prone to
becoming invalidated concurrently, since it is set before we even
acquire a lock on a related heap page buffer.
Oversight in commit 7136bf34, which added the assertion in passing.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Tang <tanghy.fnst@fujitsu.com>
Diagnosed-By:: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDzgc8_MYrA5m1fyydomw_eVKtQiYh7sfDK4KEhdMsf_g@mail.gmail.com
Document VACUUM's soft assumption that any LP_DEAD items encountered
during pruning will become LP_UNUSED items before VACUUM finishes up.
This is integral to the accounting used by VACUUM to generate its final
report on the table to the stats collector. It also affects how VACUUM
determines which heap pages are truncatable. In both cases VACUUM is
concerned with the likely contents of the page in the near future, not
the current contents of the page.
This state of affairs created the false impression that VACUUM's dead
tuple accounting had significant difference with similar accounting used
during ANALYZE. There were and are no substantive differences, at least
when the soft assumption completely works out. This is far clearer now.
Also document cases where things don't quite work out for VACUUM's dead
tuple accounting. It's possible that a significant number of LP_DEAD
items will be left behind by VACUUM, and won't be recorded as remaining
dead tuples in VACUUM's statistics collector report. This behavior
dates back to commit a96c41fe, which taught VACUUM to run without index
and heap vacuuming at the user's request. The failsafe mechanism added
to VACUUM more recently by commit 1e55e7d1 takes the same approach to
dead tuple accounting.
Reported-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=Jmtu18PrsYq3EvvZJGOmZqSO2u3bvKpx9xJa5uhNp=Q@mail.gmail.com
It seems like a good idea to bypass heap truncation when the wraparound
failsafe mechanism (which was added in commit 1e55e7d1) is in effect.
Deliberately don't bypass heap truncation in the INDEX_CLEANUP=off case,
even though it is similar to the failsafe case. There is already a
separate reloption (and related VACUUM parameter) for that.
Reported-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDWRh6oTN5T8wa+cpZUVpHXET8BJ8Da7WHVHpwkPP6KLg@mail.gmail.com
heap_update needs to clear any existing "all visible" flag on
the old tuple's page (and on the new page too, if different).
Per coding rules, to do this it must acquire pin on the appropriate
visibility-map page while not holding exclusive buffer lock;
which creates a race condition since someone else could set the
flag whenever we're not holding the buffer lock. The code is
supposed to handle that by re-checking the flag after acquiring
buffer lock and retrying if it became set. However, one code
path through heap_update itself, as well as one in its subroutine
RelationGetBufferForTuple, failed to do this. The end result,
in the unlikely event that a concurrent VACUUM did set the flag
while we're transiently not holding lock, is a non-recurring
"PANIC: wrong buffer passed to visibilitymap_clear" failure.
This has been seen a few times in the buildfarm since recent VACUUM
changes that added code paths that could set the all-visible flag
while holding only exclusive buffer lock. Previously, the flag
was (usually?) set only after doing LockBufferForCleanup, which
would insist on buffer pin count zero, thus preventing the flag
from becoming set partway through heap_update. However, it's
clear that it's heap_update not VACUUM that's at fault here.
What's less clear is whether there is any hazard from these bugs
in released branches. heap_update is certainly violating API
expectations, but if there is no code path that can set all-visible
without a cleanup lock then it's only a latent bug. That's not
100% certain though, besides which we should worry about extensions
or future back-patch fixes that could introduce such code paths.
I chose to back-patch to v12. Fixing RelationGetBufferForTuple
before that would require also back-patching portions of older
fixes (notably 0d1fe9f74), which is more code churn than seems
prudent to fix a hypothetical issue.
Discussion: https://postgr.es/m/2247102.1618008027@sss.pgh.pa.us
Commit 6f38d4dac3 failed to heed a warning about the stability of the
value pointed to by "otid". The caller is allowed to pass in a pointer to
newtup->t_self, which will be updated during the execution of the
function. Instead, the SSI check should use the value we copy into
oldtup.t_self near the top of the function.
Not a live bug, because newtup->t_self doesn't really get updated until
a bit later, but it was confusing and broke the rule established by the
comment.
Back-patch to 13.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2689164.1618160085%40sss.pgh.pa.us
VACUUM has never needed to call ambulkdelete() for each index in cases
where there are precisely zero TIDs in its dead_tuples array by the end
of its first pass over the heap (also its only pass over the heap in
this scenario). Index vacuuming is simply not required when this
happens. Index cleanup will still go ahead, but in practice most calls
to amvacuumcleanup() are usually no-ops when there were zero preceding
ambulkdelete() calls. In short, VACUUM has generally managed to avoid
index scans when there were clearly no index tuples to delete from
indexes. But cases with _close to_ no index tuples to delete were
another matter -- a round of ambulkdelete() calls took place (one per
index), each of which performed a full index scan.
VACUUM now behaves just as if there were zero index tuples to delete in
cases where there are in fact "virtually zero" such tuples. That is, it
can now bypass index vacuuming and heap vacuuming as an optimization
(though not index cleanup). Whether or not VACUUM bypasses indexes is
determined dynamically, based on the just-observed number of heap pages
in the table that have one or more LP_DEAD items (LP_DEAD items in heap
pages have a 1:1 correspondence with index tuples that still need to be
deleted from each index in the worst case).
We only skip index vacuuming when 2% or less of the table's pages have
one or more LP_DEAD items -- bypassing index vacuuming as an
optimization must not noticeably impede setting bits in the visibility
map. As a further condition, the dead_tuples array (i.e. VACUUM's array
of LP_DEAD item TIDs) must not exceed 32MB at the point that the first
pass over the heap finishes, which is also when the decision to bypass
is made. (The VACUUM must also have been able to fit all TIDs in its
maintenance_work_mem-bound dead_tuples space, though with a default
maintenance_work_mem setting it can't matter.)
This avoids surprising jumps in the duration and overhead of routine
vacuuming with workloads where successive VACUUM operations consistently
have almost zero dead index tuples. The number of LP_DEAD items may
well accumulate over multiple VACUUM operations, before finally the
threshold is crossed and VACUUM performs conventional index vacuuming.
Even then, the optimization will have avoided a great deal of largely
unnecessary index vacuuming.
In the future we may teach VACUUM to skip index vacuuming on a per-index
basis, using a much more sophisticated approach. For now we only
consider the extreme cases, where we can be quite confident that index
vacuuming just isn't worth it using simple heuristics.
Also log information about how many heap pages have one or more LP_DEAD
items when autovacuum logging is enabled.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmkebqPd4MVGuPTOS9bMFvp9MDs5cRTCOsv1rQJ3jCbXw@mail.gmail.com
Add a failsafe mechanism that is triggered by VACUUM when it notices
that the table's relfrozenxid and/or relminmxid are dangerously far in
the past. VACUUM checks the age of the table dynamically, at regular
intervals.
When the failsafe triggers, VACUUM takes extraordinary measures to
finish as quickly as possible so that relfrozenxid and/or relminmxid can
be advanced. VACUUM will stop applying any cost-based delay that may be
in effect. VACUUM will also bypass any further index vacuuming and heap
vacuuming -- it only completes whatever remaining pruning and freezing
is required. Bypassing index/heap vacuuming is enabled by commit
8523492d, which made it possible to dynamically trigger the mechanism
already used within VACUUM when it is run with INDEX_CLEANUP off.
It is expected that the failsafe will almost always trigger within an
autovacuum to prevent wraparound, long after the autovacuum began.
However, the failsafe mechanism can trigger in any VACUUM operation.
Even in a non-aggressive VACUUM, where we're likely to not advance
relfrozenxid, it still seems like a good idea to finish off remaining
pruning and freezing. An aggressive/anti-wraparound VACUUM will be
launched immediately afterwards. Note that the anti-wraparound VACUUM
that follows will itself trigger the failsafe, usually before it even
begins its first (and only) pass over the heap.
The failsafe is controlled by two new GUCs: vacuum_failsafe_age, and
vacuum_multixact_failsafe_age. There are no equivalent reloptions,
since that isn't expected to be useful. The GUCs have rather high
defaults (both default to 1.6 billion), and are expected to generally
only be used to make the failsafe trigger sooner/more frequently.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmgH3ySGYeC-m-eOBsa2=sDwa292-CFghV4rESYo39FsQ@mail.gmail.com
Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded. This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.
Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.
Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com
Retry the call to heap_prune_page() in rare cases where there is
disagreement between the heap_prune_page() call and the call to
HeapTupleSatisfiesVacuum() that immediately follows. Disagreement is
possible when a concurrently-aborted transaction makes a tuple DEAD
during the tiny window between each step. This was the only case where
a tuple considered DEAD by VACUUM still had storage following pruning.
VACUUM's definition of dead tuples is now uniformly simple and
unambiguous: dead tuples from each page are always LP_DEAD line pointers
that were encountered just after we performed pruning (and just before
we considered freezing remaining items with tuple storage).
Eliminating the tupgone=true special case enables INDEX_CLEANUP=off
style skipping of index vacuuming that takes place based on flexible,
dynamic criteria. The INDEX_CLEANUP=off case had to know about skipping
indexes up-front before now, due to a subtle interaction with the
special case (see commit dd695979) -- this was a special case unto
itself. Now there are no special cases. And so now it won't matter
when or how we decide to skip index vacuuming: it won't affect how
pruning behaves, and it won't be affected by any of the implementation
details of pruning or freezing.
Also remove XLOG_HEAP2_CLEANUP_INFO records. These are no longer
necessary because we now rely entirely on heap pruning taking care of
recovery conflicts. There is no longer any need to generate recovery
conflicts for DEAD tuples that pruning just missed. This also means
that heap vacuuming now uses exactly the same strategy for recovery
conflicts as index vacuuming always has: REDO routines never need to
process a latestRemovedXid from the WAL record, since earlier REDO of
the WAL record from pruning is sufficient in all cases. The generic
XLOG_HEAP2_CLEAN record type is now split into two new record types to
reflect this new division (these are called XLOG_HEAP2_PRUNE and
XLOG_HEAP2_VACUUM).
Also stop acquiring a super-exclusive lock for heap pages when they're
vacuumed during VACUUM's second heap pass. A regular exclusive lock is
enough. This is correct because heap page vacuuming is now strictly a
matter of setting the LP_DEAD line pointers to LP_UNUSED. No other
backend can have a pointer to a tuple located in a pinned buffer that
can be invalidated by a concurrent heap page vacuum operation.
Heap vacuuming can now be thought of as conceptually similar to index
vacuuming and conceptually dissimilar to heap pruning. Heap pruning now
has sole responsibility for anything involving the logical contents of
the database (e.g., managing transaction status information, recovery
conflicts, considering what to do with HOT chains). Index vacuuming and
heap vacuuming are now only concerned with recycling garbage items from
physical data structures that back the logical database.
Bump XLOG_PAGE_MAGIC due to pruning and heap page vacuum WAL record
changes.
Credit for the idea of retrying pruning a page to avoid the tupgone case
goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
Add a lazy_scan_heap() subsidiary function that handles heap pruning and
tuple freezing: lazy_scan_prune(). This is a great deal cleaner. The
code that remains in lazy_scan_heap()'s per-block loop can now be
thought of as code that either comes before or after the call to
lazy_scan_prune(), which is now the clear focal point. This division is
enforced by the way in which we now manage state. lazy_scan_prune()
outputs state (using its own struct) that describes what to do with the
page following pruning and freezing (e.g., visibility map maintenance,
recording free space in the FSM). It doesn't get passed any special
instructional state from the preamble code, though.
Also cleanly separate the logic used by a VACUUM with INDEX_CLEANUP=off
from the logic used by single-heap-pass VACUUMs. The former case is now
structured as the omission of index and heap vacuuming by a two pass
VACUUM. The latter case goes back to being used only when the table
happens to have no indexes (just as it was before commit a96c41fe).
This structure is much more natural, since the whole point of
INDEX_CLEANUP=off is to skip the index and heap vacuuming that would
otherwise take place. The single-heap-pass case doesn't skip any useful
work, though -- it just does heap pruning and heap vacuuming together
when the table happens to have no indexes.
Both of these changes are preparation for an upcoming patch that
generalizes the mechanism used by INDEX_CLEANUP=off. The later patch
will allow VACUUM to give up on index and heap vacuuming dynamically, as
problems emerge (e.g., with wraparound), so that an affected VACUUM
operation can finish up as soon as possible.
Also fix a very old bug in single-pass VACUUM VERBOSE output. We were
reporting the number of tuples deleted via pruning as a direct
substitute for reporting the number of LP_DEAD items removed in a
function that deals with the second pass over the heap. But that
doesn't work at all -- they're two different things.
To fix, start tracking the total number of LP_DEAD items encountered
during pruning, and use that in the report instead. A single pass
VACUUM will always vacuum away whatever LP_DEAD items a heap page has
immediately after it is pruned, so the total number of LP_DEAD items
encountered during pruning equals the total number vacuumed-away.
(They are _not_ equal in the INDEX_CLEANUP=off case, but that's okay
because skipping index vacuuming is now a totally orthogonal concept to
one-pass VACUUM.)
Also stop reporting the count of LP_UNUSED items in VACUUM VERBOSE
output. This makes the output of VACUUM VERBOSE more consistent with
log_autovacuum's output (because it never showed information about
LP_UNUSED items). VACUUM VERBOSE reported LP_UNUSED items left behind
by the last VACUUM, and LP_UNUSED items created via pruning HOT chains
during the current VACUUM (it never included LP_UNUSED items left behind
by the current VACUUM's second pass over the heap). This makes it
useless as an indicator of line pointer bloat, which must have been the
original intention. (Like the first VACUUM VERBOSE issue, this issue was
arguably an oversight in commit 282d2a03, which added the heap-only
tuple optimization.)
Finally, stop reporting empty_pages in VACUUM VERBOSE output, and start
reporting pages_removed instead. This also makes the output of VACUUM
VERBOSE more consistent with log_autovacuum's output (which does not
show empty_pages, but does show pages_removed). An empty page isn't
meaningfully different to a page that is almost empty, or a page that is
empty but for only a small number of remaining LP_UNUSED items.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
Commit 49f49def took entirely the wrong approach to fixing this issue.
Just allocate a local buffer access strategy in each individual worker
instead of trying to propagate state. This state was never propagated
by parallel VACUUM in the first place.
It looks like the only reason that this worked following commit 40d964ec
was that it involved static global variables, which are initialized to 0
per the C standard.
A more comprehensive fix may be necessary, even on HEAD. This fix
should at least get the buildfarm green once again.
Thanks once again to Thomas Munro for continued off-list assistance with
the issue.
Parallel VACUUM relied on global variable state from the leader process
being propagated to workers on fork(). Commit b4af70cb removed most
uses of global variables inside vacuumlazy.c, but did not account for
the buffer access strategy state.
To fix, propagate the state through shared memory instead.
Per buildfarm failures on elver, curculio, and morepork.
Many thanks to Thomas Munro for off-list assistance with this issue.
Reorganize the state struct used by VACUUM -- group related items
together to make it easier to understand. Also stop relying on stack
variables inside lazy_scan_heap() -- move those into the state struct
instead. Doing things this way simplifies large groups of related
functions whose function signatures had a lot of unnecessary redundancy.
Switch over to using int64 for the struct fields used to count things
that are reported to the user via log_autovacuum and VACUUM VERBOSE
output. We were using double, but that doesn't seem to have any
advantages. Using int64 makes it possible to add assertions that verify
that the first pass over the heap (pruning) encounters precisely the
same number of LP_DEAD items that get deleted from indexes later on, in
the second pass over the heap. These assertions will be added in later
commits.
Finally, adjust the signatures of functions with IndexBulkDeleteResult
pointer arguments in cases where there was ambiguity about whether or
not the argument relates to a single index or all indexes. Functions
now use the idiom that both ambulkdelete() and amvacuumcleanup() have
always used (where appropriate): accept a mutable IndexBulkDeleteResult
pointer argument, and return a result IndexBulkDeleteResult pointer to
caller.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkeOSYwC6KNckbhk2b1aNnWum6Yyn0NKP9D-Hq1LGTDPw@mail.gmail.com
We always inserted a larger-than-fillfactor tuple into a newly-extended
page, even when existing pages were empty or contained nothing but an
unused line pointer. This was unnecessary relation extension. Start
tolerating page usage up to 1/8 the maximum space that could be taken up
by line pointers. This is somewhat arbitrary, but it should allow more
cases to reuse pages. This has no effect on tables with fillfactor=100
(the default).
John Naylor and Floris van Nee. Reviewed by Matthias van de Meent.
Reported by Floris van Nee.
Discussion: https://postgr.es/m/6e263217180649339720afe2176c50aa@opammb0562.comp.optiver.com
The design of the data structures which allow storage of the per-worker
memory during parallel seq scans were not ideal. The work done in
56788d215 required an additional data structure to allow workers to
remember the range of pages that had been allocated to them for
processing during a parallel seqscan. That commit added a void pointer
field to TableScanDescData to allow heapam to store the per-worker
allocation information. However putting the field there made very little
sense given that we have AM specific structs for that, e.g.
HeapScanDescData.
Here we remove the void pointer field from TableScanDescData and add a
dedicated field for this purpose to HeapScanDescData.
Previously we also allocated memory for this parallel per-worker data for
all scans, regardless if it was a parallel scan or not. This was just a
wasted allocation for non-parallel scans, so here we make the allocation
conditional on the scan being parallel.
Also, add previously missing pfree() to free the per-worker data in
heap_endscan().
Reported-by: Andres Freund
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20210317023101.anvejcfotwka6gaa@alap3.anarazel.de
end_heap_rewrite was not careful to ensure that the target relation
is open at the smgr level before performing its final smgrimmedsync.
In ordinary cases this is no problem, because it would have been
opened earlier during the rewrite. However a crash can be reproduced
by re-clustering an empty table with CLOBBER_CACHE_ALWAYS enabled.
Although that exact scenario does not crash in v13, I think that's
a chance result of unrelated planner changes, and the problem is
likely still reachable with other test cases. The true proximate
cause of this failure is commit c6b92041d, which replaced a call to
heap_sync (which was careful about opening smgr) with a direct call
to smgrimmedsync. Hence, back-patch to v13.
Amul Sul, per report from Neha Sharma; cosmetic changes
and test case by me.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
Once a relation's autovacuum is completed, the logs include more
information about this relation state if the threshold of
log_autovacuum_min_duration (or its relation option) is reached, with
for example contents about the statistics of the VACUUM operation for
the relation, WAL and system usage.
This commit adds more information about the statistics of the relation's
indexes, with one line of logs generated for each index. The index
stats were already calculated, but not printed in the context of
autovacuum yet. While on it, some refactoring is done to keep track of
the index statistics directly within LVRelStats, simplifying some
routines related to parallel VACUUMs.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoAy6SxHiTivh5yAPJSUE4S=QRPpSZUdafOSz0R+fRcM6Q@mail.gmail.com
Previously, to check relation permanence, the Relation's Form_pg_class
structure member relpersistence was compared to the value
RELPERSISTENCE_PERMANENT ("p"). This commit adds the macro
RelationIsPermanent() and is used in appropirate places to simplify the
code. This matches other RelationIs* macros.
This macro will be used in more places in future cluster file encryption
patches.
Discussion: https://postgr.es/m/20210318153134.GH20766@tamriel.snowman.net
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Consistently set a flag variable that tracks whether the current heap
page has a dead item during lazy vacuum's heap scan. We missed the
common case where there is an preexisting (or even a new) LP_DEAD heap
line pointer.
Also make it clear that the variable might be affected by an existing
line pointer, say from an earlier opportunistic pruning operation. This
distinction is important because it's the main reason why we can't just
use the nearby tups_vacuumed variable instead.
No backpatch. In theory failing to set the page level flag variable had
no consequences. Currently it is only used to defensively check if a
page marked all visible has dead items, which should never happen anyway
(if it does then the table must be corrupt).
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Diagnosed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAtZb4+HJT_8RoOXvu4HM-Zd4HKS3YSMCH6+-W=bDyh-w@mail.gmail.com
vacuumlazy.c sometimes fails to update pg_class entries for each index
(to ensure that pg_class.reltuples is current), even though analyze.c
assumed that that must have happened during VACUUM ANALYZE. There are
at least a couple of reasons for this. For example, vacuumlazy.c could
fail to update pg_class when the index AM indicated that its statistics
are merely an estimate, per the contract for amvacuumcleanup() routines
established by commit e57345975c back in 2006.
Stop assuming that pg_class must have been updated with accurate
statistics within VACUUM ANALYZE -- update pg_class for indexes at the
same time as the table relation in all cases. That way VACUUM ANALYZE
will never fail to keep pg_class.reltuples reasonably accurate.
The only downside of this approach (compared to the old approach) is
that it might inaccurately set pg_class.reltuples for indexes whose heap
relation ends up with the same inaccurate value anyway. This doesn't
seem too bad. We already consistently called vac_update_relstats() (to
update pg_class) for the heap/table relation twice during any VACUUM
ANALYZE -- once in vacuumlazy.c, and once in analyze.c. We now make
sure that we call vac_update_relstats() at least once (though often
twice) for each index.
This is follow up work to commit 9f3665fb, which dealt with issues in
btvacuumcleanup(). Technically this fixes an unrelated issue, though.
btvacuumcleanup() no longer provides an accurate num_index_tuples value
following commit 9f3665fb (when there was no btbulkdelete() call during
the VACUUM operation in question), but hashvacuumcleanup() has worked in
the same way for many years now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzknxdComjhqo4SUxVFk_Q1171GJO2ZgHZ1Y6pion6u8rA@mail.gmail.com
Backpatch: 13-, just like commit 9f3665fb.
In the current lazy vacuum implementation, some index AMs such as
btree indexes call lazy_tid_reaped() for each index tuple during
ambulkdelete to check if the index tuple points to the (collected)
garbage tuple. In that function, we simply call bsearch(), but we
should be able to know the result without bsearch() if the index tuple
points to the heap tuple that is out of range of the collected garbage
tuples. Therefore, add a simple bound check before resorting to
bsearch(). Testing has shown that this can give significant
performance benefits.
Author: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+fd4k76j8jKzJzcx8UqEugvayaMSnQz0iLUt_XgBp-_-bd22A@mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Teach VACUUM VERBOSE to report on pages deleted by the _current_ VACUUM
operation -- these are newly deleted pages. VACUUM VERBOSE continues to
report on the total number of deleted pages in the entire index (no
change there). The former is a subset of the latter.
The distinction between each category of deleted index page only arises
with index AMs where page deletion is supported and is decoupled from
page recycling for performance reasons.
This is follow-up work to commit e5d8a999, which made nbtree store
64-bit XIDs (not 32-bit XIDs) in pages at the point at which they're
deleted. Note that the btm_last_cleanup_num_delpages metapage field
added by that commit usually gets set to pages_newly_deleted. The
exceptions (the scenarios in which they're not equal) all seem to be
tricky cases for the implementation (of page deletion and recycling) in
general.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX%3Dd5u-tRYhi-F4wnV2uN2zHpMUXw%40mail.gmail.com
Commit 866e24d47d added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
Pavan Deolasee recently noted that a few of the
HeapTupleHeaderIndicatesMovedPartitions calls added by commit
5db6df0c01 are useless, since they are done after comparing t_self
with t_ctid. But because t_self can never be set to the magical values
that indicate that the tuple moved partition, this can never succeed: if
the first test fails (so we know t_self equals t_ctid), necessarily the
second test will also fail.
So these checks can be removed and no harm is done. There's no bug
here, just a code legibility issue.
Reported-by: Pavan Deolasee <pavan.deolasee@gmail.com>
Discussion: https://postgr.es/m/20200929164411.GA15497@alvherre.pgsql
Both luckily and unluckily the passed values meant the same for all
types. Luckily because that meant my confusion caused no harm,
unluckily because otherwise the compiler might have warned...
In passing, synchronize parameter names between definition and
declaration.
Reported-By: Peter Geoghegan <pg@bowt.ie>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wz=L=nBoepQdH9b5Qd0nMvepFT2CnT6sjWvvpOXa=K8HVQ@mail.gmail.com
Up until now, we've held this lock when performing a checkpoint or
restartpoint, but commit 076a055acf back
in 2004 and commit 7e48b77b1c from 2009,
taken together, have removed all need for this. In the present code,
there's only ever one process entitled to attempt a checkpoint: either
the checkpointer, during normal operation, or the postmaster, during
single-user operation. So, we don't need the lock.
One possible concern in making this change is that it means that
a substantial amount of code where HOLD_INTERRUPTS() was previously
in effect due to the preceding LWLockAcquire() will now be
running without that. This could mean that ProcessInterrupts()
gets called in places from which it didn't before. However, this
seems unlikely to do very much, because the checkpointer doesn't
have any signal mapped to die(), so it's not clear how,
for example, ProcDiePending = true could happen in the first
place. Similarly with ClientConnectionLost and recovery conflicts.
Also, if there are any such problems, we might want to fix them
rather than reverting this, since running lots of code with
interrupt handling suspended is generally bad.
Patch by me, per an inquiry by Amul Sul. Review by Tom Lane
and Michael Paquier.
Discussion: http://postgr.es/m/CAAJ_b97XnBBfYeSREDJorFsyoD1sHgqnNuCi=02mNQBUMnA=FA@mail.gmail.com
Both heapgettup() and heapgettup_pagemode() incorrectly set the first page
to scan in a backward scan in which the number of pages to scan was
specified by heap_setscanlimits(). The code incorrectly started the scan
at the end of the relation when startBlk was 0, or otherwise at
startBlk - 1, neither of which is correct when only scanning a subset of
pages.
The fix here checks if heap_setscanlimits() has changed the number of
pages to scan and if so we set the first page to scan as the final page in
the specified range during backward scans.
Proper adjustment of this code was forgotten when heap_setscanlimits() was
added in 7516f5259 back in 9.5. However, practice, nowhere in core code
performs backward scans after having used heap_setscanlimits(), yet, it is
possible an extension uses the heap functions in this way, hence
backpatch.
An upcoming patch does use heap_setscanlimits() with backward scans, so
this must be fixed before that can go in.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGc9h0_oVD2CtgBcxCS1N-qDYZSeBRnUh+0CWJA9cMaA@mail.gmail.com
Backpatch-through: 9.5, all supported versions
This adds code omitted from commit 7db0cd2145 by accident, which had
two consequences. Firstly, only rows inserted by heap_multi_insert were
frozen as expected when running COPY FREEZE, while heap_insert left
rows unfrozen. That however includes rows in TOAST tables, so a lot of
data might have been left unfrozen. Secondly, page might have been left
partially empty after relcache invalidation.
This addresses both of those issues.
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Make sure COPY FREEZE marks the pages as PD_ALL_VISIBLE and updates the
visibility map. Until now we only marked individual tuples as frozen,
but page-level flags were not updated, so the first VACUUM after the
COPY FREEZE had to rewrite the whole table.
This is a fairly old patch, and multiple people worked on it. The first
version was written by Jeff Janes, and then reworked by Pavan Deolasee
and Anastasia Lubennikova.
Author: Anastasia Lubennikova, Pavan Deolasee, Jeff Janes
Reviewed-by: Kuntal Ghosh, Jeff Janes, Tomas Vondra, Masahiko Sawada,
Andres Freund, Ibrar Ahmed, Robert Haas, Tatsuro Ishii,
Darafei Praliaskouski
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Discussion: https://postgr.es/m/CAMkU%3D1w3osJJ2FneELhhNRLxfZitDgp9FPHee08NT2FQFmz_pQ%40mail.gmail.com
Teach nbtree and heapam to cooperate in order to eagerly remove
duplicate tuples representing dead MVCC versions. This is "bottom-up
deletion". Each bottom-up deletion pass is triggered lazily in response
to a flood of versions on an nbtree leaf page. This usually involves a
"logically unchanged index" hint (these are produced by the executor
mechanism added by commit 9dc718bd).
The immediate goal of bottom-up index deletion is to avoid "unnecessary"
page splits caused entirely by version duplicates. It naturally has an
even more useful effect, though: it acts as a backstop against
accumulating an excessive number of index tuple versions for any given
_logical row_. Bottom-up index deletion complements what we might now
call "top-down index deletion": index vacuuming performed by VACUUM.
Bottom-up index deletion responds to the immediate local needs of
queries, while leaving it up to autovacuum to perform infrequent clean
sweeps of the index. The overall effect is to avoid certain
pathological performance issues related to "version churn" from UPDATEs.
The previous tableam interface used by index AMs to perform tuple
deletion (the table_compute_xid_horizon_for_tuples() function) has been
replaced with a new interface that supports certain new requirements.
Many (perhaps all) of the capabilities added to nbtree by this commit
could also be extended to other index AMs. That is left as work for a
later commit.
Extend deletion of LP_DEAD-marked index tuples in nbtree by adding logic
to consider extra index tuples (that are not LP_DEAD-marked) for
deletion in passing. This increases the number of index tuples deleted
significantly in many cases. The LP_DEAD deletion process (which is now
called "simple deletion" to clearly distinguish it from bottom-up
deletion) won't usually need to visit any extra table blocks to check
these extra tuples. We have to visit the same table blocks anyway to
generate a latestRemovedXid value (at least in the common case where the
index deletion operation's WAL record needs such a value).
Testing has shown that the "extra tuples" simple deletion enhancement
increases the number of index tuples deleted with almost any workload
that has LP_DEAD bits set in leaf pages. That is, it almost never fails
to delete at least a few extra index tuples. It helps most of all in
cases that happen to naturally have a lot of delete-safe tuples. It's
not uncommon for an individual deletion operation to end up deleting an
order of magnitude more index tuples compared to the old naive approach
(e.g., custom instrumentation of the patch shows that this happens
fairly often when the regression tests are run).
Add a further enhancement that augments simple deletion and bottom-up
deletion in indexes that make use of deduplication: Teach nbtree's
_bt_delitems_delete() function to support granular TID deletion in
posting list tuples. It is now possible to delete individual TIDs from
posting list tuples provided the TIDs have a tableam block number of a
table block that gets visited as part of the deletion process (visiting
the table block can be triggered directly or indirectly). Setting the
LP_DEAD bit of a posting list tuple is still an all-or-nothing thing,
but that matters much less now that deletion only needs to start out
with the right _general_ idea about which index tuples are deletable.
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
No bump in BTREE_VERSION, since there are no changes to the on-disk
representation of nbtree indexes. Indexes built on PostgreSQL 12 or
PostgreSQL 13 will automatically benefit from bottom-up index deletion
(i.e. no reindexing required) following a pg_upgrade. The enhancement
to simple deletion is available with all B-Tree indexes following a
pg_upgrade, no matter what PostgreSQL version the user upgrades from.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzm+maE3apHB8NOtmM=p-DO65j2V5GzAWCOEEuy3JZgb2g@mail.gmail.com
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
On further reflection it seems better to call PageGetMaxOffsetNumber()
after acquiring a buffer lock on the page. This shouldn't really
matter, but doing it this way is cleaner.
Follow-up to commit 42288174.
Backpatch: 12-, just like commit 42288174
The logic for determining the latest removed XID for the purposes of
generating recovery conflicts in REDO routines was subtly broken. It
failed to follow links from HOT chains, and so failed to consider all
relevant heap tuple headers in some cases.
To fix, expand the loop that deals with LP_REDIRECT line pointers to
also deal with HOT chains. The new version of the loop is loosely based
on a similar loop from heap_prune_chain().
The impact of this bug is probably quite limited, since the horizon code
necessarily deals with heap tuples that are pointed to by LP_DEAD-set
index tuples. The process of setting LP_DEAD index tuples (e.g. within
the kill_prior_tuple mechanism) is highly correlated with opportunistic
pruning of pointed-to heap tuples. Plus the question of generating a
recovery conflict usually comes up some time after index tuple LP_DEAD
bits were initially set, unlike heap pruning, where a latestRemovedXid
is generated at the point of the pruning operation (heap pruning has no
deferred "would-be page split" style processing that produces conflicts
lazily).
Only backpatch to Postgres 12, the first version where this logic runs
during original execution (following commit 558a9165e0). The index
latestRemovedXid mechanism has had the same bug since it first appeared
over 10 years ago (in commit a760893d), but backpatching to all
supported versions now seems like a bad idea on balance. Running the
new improved code during recovery seems risky, especially given the lack
of complaints from the field.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=Eib393+HHcERK_9MtgNS7Ew1HY=RDC_g6GL46zM5C6Q@mail.gmail.com
Backpatch: 12-
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
pg_database.datfrozenxid gets updated using an in-place update at the
end of vacuum or autovacuum. Since 96cdeae, as pg_database has a toast
relation, it is possible for a pg_database tuple to have toast values
if there is a large set of ACLs in place. In such a case, the in-place
update would fail because of the flattening of the toast values done for
the catcache entry fetched. Instead of using a copy from the catcache,
this changes the logic to fetch the copy of the tuple by directly
scanning pg_database.
Per the lack of complaints on the matter, no backpatch is done. Note
that before 96cdeae, attempting to insert such a tuple to pg_database
would cause a "row is too big" error, so the end-of-vacuum problem was
not reachable.
Author: Ashwin Agrawal, Junfeng Yang
Discussion: https://postgr.es/m/DM5PR0501MB38800D9E4605BCA72DD35557CCE10@DM5PR0501MB3880.namprd05.prod.outlook.com
Previously pg_stat_progress_cluster view reported the current block
number in heap scan as the number of heap blocks scanned (i.e.,
heap_blks_scanned). This reported number could be incorrect when
synchronize_seqscans is enabled, because it allowed the heap scan to
start at block in middle. This could result in wraparounds in the
heap_blks_scanned column when the heap scan wrapped around.
This commit fixes the bug by calculating the number of blocks from
the block that the heap scan starts at to the current block in scan,
and reporting that number in the heap_blks_scanned column.
Also, in pg_stat_progress_cluster view, previously heap_blks_scanned
could not reach heap_blks_total at the end of heap scan phase
if the last pages scanned were empty. This commit fixes the bug by
manually updating heap_blks_scanned to the same value as
heap_blks_total when the heap scan phase finishes.
Back-patch to v12 where pg_stat_progress_cluster view was introduced.
Reported-by: Matthias van de Meent
Author: Matthias van de Meent
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAEze2WjCBWSGkVfYag001Rc4+-nNLDpWM7QbyD6yPvuhKs-gYQ@mail.gmail.com
Remove a CHECK_FOR_INTERRUPTS() call that could never actually handle an
interrupt. We always have a heap page buffer lock at this point.
Having a useless CHECK_FOR_INTERRUPTS() call is harmless but misleading.
It is probably possible to work around the immediate problem by moving
the CHECK_FOR_INTERRUPTS() to before the heap page buffer lock is
acquired. That isn't enough to make the function responsive to
interrupts, though. The index AM caller will still hold an exclusive
buffer lock of its own.
* Avoid pointlessly highlighting that an index vacuum was executed by a
parallel worker; user doesn't care.
* Don't give the impression that a non-concurrent reindex of an invalid
index on a TOAST table would work, because it wouldn't.
* Add a "translator:" comment for a mysterious message.
Discussion: https://postgr.es/m/20201107034943.GA16596@alvherre.pgsql
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Certain background workers initiate parallel queries while
debug_query_string==NULL, at which point they attempted strlen(NULL) and
died to SIGSEGV. Older debug_query_string observers allow NULL, so do
likewise in these newer ones. Back-patch to v11, where commit
7de4a1bcc5 introduced the first of these.
Discussion: https://postgr.es/m/20201014022636.GA1962668@rfd.leadboat.com
This fixes a bug in the edge case where, for a temp table, heap_page_prune()
can end up with a different horizon than heap_vacuum_rel(). Which can trigger
errors like "ERROR: cannot freeze committed xmax ...".
The bug was introduced due to interaction of a7212be8b9 "Set cutoff xmin more
aggressively when vacuuming a temporary table." with dc7420c2c9 "snapshot
scalability: Don't compute global horizons while building snapshots.".
The problem is caused by lazy_scan_heap() assuming that the only reason its
HeapTupleSatisfiesVacuum() call would return HEAPTUPLE_DEAD is if the tuple is
a HOT tuple, or if the tuple's inserting transaction has aborted since the
heap_page_prune() call. But after a7212be8b9 that was also possible in other
cases for temp tables, because heap_page_prune() uses a different visibility
test after dc7420c2c9.
The fix is fairly simple: Move the special case logic for temp tables from
vacuum_set_xid_limits() to the infrastructure introduced in dc7420c2c9. That
ensures that the horizon used for pruning is at least as aggressive as the one
used by lazy_scan_heap(). The concrete horizon used for temp tables is
slightly different than the logic in dc7420c2c9, but should always be as
aggressive as before (see comments).
A significant benefit to centralizing the logic procarray.c is that now the
more aggressive horizons for temp tables does not just apply to VACUUM but
also to e.g. HOT pruning and the nbtree killtuples logic.
Because isTopLevel is not needed by vacuum_set_xid_limits() anymore, I
undid the the related changes from a7212be8b9.
This commit also adds an isolation test ensuring that the more aggressive
vacuuming and pruning of temp tables keeps working.
Debugged-By: Amit Kapila <amit.kapila16@gmail.com>
Debugged-By: Tom Lane <tgl@sss.pgh.pa.us>
Debugged-By: Ashutosh Sharma <ashu.coek88@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20201014203103.72oke6hqywcyhx7s@alap3.anarazel.de
Discussion: https://postgr.es/m/20201015083735.derdzysdtqdvxshp@alap3.anarazel.de
Pavan Deolasee recently noted that a few of the
HeapTupleHeaderIndicatesMovedPartitions calls added by commit
5db6df0c01 are useless, since they are done after comparing t_self
with t_ctid. But because t_self can never be set to the magical values
that indicate that the tuple moved partition, this can never succeed: if
the first test fails (so we know t_self equals t_ctid), necessarily the
second test will also fail.
So these checks can be removed and no harm is done.
Discussion: https://postgr.es/m/20200929164411.GA15497@alvherre.pgsql
After commits 85f6b49c2c and 3ba59ccc89, we can allow parallel inserts
which was earlier not possible as parallel group members won't conflict
for relation extension and page lock. In those commits, we forgot to
update comments at few places.
Author: Amit Kapila
Reviewed-by: Robert Haas and Dilip Kumar
Backpatch-through: 13
Discussion: https://postgr.es/m/CAFiTN-tMrQh5FFMPx5aWJ+1gi1H6JxktEhq5mDwCHgnEO5oBkA@mail.gmail.com
Since other sessions aren't allowed to look into a temporary table
of our own session, we do not need to worry about the global xmin
horizon when setting the vacuum XID cutoff. Indeed, if we're not
inside a transaction block, we may set oldestXmin to be the next
XID, because there cannot be any in-doubt tuples in a temp table,
nor any tuples that are dead but still visible to some snapshot of
our transaction. (VACUUM, of course, is never inside a transaction
block; but we need to test that because CLUSTER shares the same code.)
This approach allows us to always clean out a temp table completely
during VACUUM, independently of concurrent activity. Aside from
being useful in its own right, that simplifies building reproducible
test cases.
Discussion: https://postgr.es/m/3490536.1598629609@sss.pgh.pa.us
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
The additional information added will be an offset number for heap
operations. This information will help us in finding the exact tuple due
to which the error has occurred.
Author: Mahendra Singh Thalor and Amit Kapila
Reviewed-by: Sawada Masahiko, Justin Pryzby and Amit Kapila
Discussion: https://postgr.es/m/CAKYtNApK488TDF4bMbw+1QH8HJf9cxdNDXquhU50TK5iv_FtCQ@mail.gmail.com
We were displaying the wrong phase information for 'info' message in the
index clean up phase because we were switching to the previous phase a bit
early. We were also not displaying context information for heap phase
unless the block number is valid which is fine for error cases but for
messages at 'info' or lower error level it appears to be inconsistent with
index phase information.
Reported-by: Sawada Masahiko
Author: Sawada Masahiko
Reviewed-by: Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k4HcbhPnCs7paRTw1K-AHin8y4xKomB9Ru0ATw0UeTy2w@mail.gmail.com
Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README. SLRUs have had access to six-character
segments names since commit 73c986adde,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165e0. The other corrections
are more self-evident.
The new array contains the xids for all connected backends / in-use
PGPROC entries in a dense manner (in contrast to the PGPROC/PGXACT
arrays which can have unused entries interspersed).
This improves performance because GetSnapshotData() always needs to
scan the xids of all live procarray entries and now there's no need to
go through the procArray->pgprocnos indirection anymore.
As the set of running top-level xids changes rarely, compared to the
number of snapshots taken, this substantially increases the likelihood
of most data required for a snapshot being in l2 cache. In
read-mostly workloads scanning the xids[] array will sufficient to
build a snapshot, as most backends will not have an xid assigned.
To keep the xid array dense ProcArrayRemove() needs to move entries
behind the to-be-removed proc's one further up in the array. Obviously
moving array entries cannot happen while a backend sets it
xid. I.e. locking needs to prevent that array entries are moved while
a backend modifies its xid.
To avoid locking ProcArrayLock in GetNewTransactionId() - a fairly hot
spot already - ProcArrayAdd() / ProcArrayRemove() now needs to hold
XidGenLock in addition to ProcArrayLock. Adding / Removing a procarray
entry is not a very frequent operation, even taking 2PC into account.
Due to the above, the dense array entries can only be read or modified
while holding ProcArrayLock and/or XidGenLock. This prevents a
concurrent ProcArrayRemove() from shifting the dense array while it is
accessed concurrently.
While the new dense array is very good when needing to look at all
xids it is less suitable when accessing a single backend's xid. In
particular it would be problematic to have to acquire a lock to access
a backend's own xid. Therefore a backend's xid is not just stored in
the dense array, but also in PGPROC. This also allows a backend to
only access the shared xid value when the backend had acquired an
xid.
The infrastructure added in this commit will be used for the remaining
PGXACT fields in subsequent commits. They are kept separate to make
review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
When a table is scanned by heapam_index_build_range_scan (née
IndexBuildHeapScan) and the table lock being held allows concurrent data
changes, it is possible for new HOT chains to sprout in a page that were
unknown when the scan of a page happened. This leads to an error such
as
ERROR: failed to find parent tuple for heap-only tuple at (X,Y) in table "tbl"
because the root tuple was not present when we first obtained the list
of the page's root tuples. This can be fixed by re-obtaining the list
of root tuples, if we see that a heap-only tuple appears to point to a
non-existing root.
This was reported by Anastasia as occurring for BRIN summarization
(which exists since 9.5), but I think it could theoretically also happen
with CREATE INDEX CONCURRENTLY (much older) or REINDEX CONCURRENTLY
(very recent). It seems a happy coincidence that BRIN forces us to
backpatch this all the way to 9.5.
Reported-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/602d8487-f0b2-5486-0088-0f372b2549fa@postgrespro.ru
Backpatch: 9.5 - master
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Avoid repeatedly calling lseek(SEEK_END) during recovery by caching
the size of each fork. For now, we can't use the same technique in
other processes, because we lack a shared invalidation mechanism.
Do this by generalizing the pre-existing caching used by FSM and VM
to support all forks.
Discussion: https://postgr.es/m/CAEepm%3D3SSw-Ty1DFcK%3D1rU-K6GSzYzfdD4d%2BZwapdN7dTa6%3DnQ%40mail.gmail.com
For pg_attribute, this allows to insert at once a full set of attributes
for a relation (roughly 15% of WAL reduction in extreme cases). For
pg_shdepend, this reduces the work done when creating new shared
dependencies from a database template. The number of slots used for the
insertion is capped at 64kB of data inserted for both, depending on the
number of items to insert and the length of the rows involved.
More can be done for other catalogs, like pg_depend. This part requires
a different approach as the number of slots to use depends also on the
number of entries discarded as pinned dependencies. This is also
related to the rework or dependency handling for ALTER TABLE and CREATE
TABLE, mainly.
Author: Daniel Gustafsson
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20190213182737.mxn6hkdxwrzgxk35@alap3.anarazel.de
Previously we would allocate blocks to parallel workers during a parallel
sequential scan 1 block at a time. Since other workers were likely to
request a block before a worker returns for another block number to work
on, this could lead to non-sequential I/O patterns in each worker which
could cause the operating system's readahead to perform poorly or not at
all.
Here we change things so that we allocate consecutive "chunks" of blocks
to workers and have them work on those until they're done, at which time
we allocate another chunk for the worker. The size of these chunks is
based on the size of the relation.
Initial patch here was by Thomas Munro which showed some good improvements
just having a fixed chunk size of 64 blocks with a simple ramp-down near
the end of the scan. The revisions of the patch to make the chunk size
based on the relation size and the adjusted ramp-down in powers of two was
done by me, along with quite extensive benchmarking to determine the
optimal chunk sizes.
For the most part, benchmarks have shown significant performance
improvements for large parallel sequential scans on Linux, FreeBSD and
Windows using SSDs. It's less clear how this affects the performance of
cloud providers. Tests done so far are unable to obtain stable enough
performance to provide meaningful benchmark results. It is possible that
this could cause some performance regressions on more obscure filesystems,
so we may need to later provide users with some ability to get something
closer to the old behavior. For now, let's leave that until we see that
it's really required.
Author: Thomas Munro, David Rowley
Reviewed-by: Ranier Vilela, Soumyadeep Chakraborty, Robert Haas
Reviewed-by: Amit Kapila, Kirk Jamison
Discussion: https://postgr.es/m/CA+hUKGJ_EErDv41YycXcbMbCBkztA34+z1ts9VQH+ACRuvpxig@mail.gmail.com
Valgrind builds with assertions enabled sometimes perform a
theoretically unsafe page access inside an assertion in
heapam_tuple_lock(). This happened when the eval-plan-qual isolation
test ran one of the permutations added by commit a2418f9e23.
Avoid complaints from Valgrind by moving the assertion ever so slightly.
This is minor cleanup for commit 1e0dfd16, which added Valgrind buffer
access instrumentation.
No backpatch, since this only happens within an assertion, and seems
very unlikely to cause any real problems even with assert-enabled
builds.
Incorrect function names were referenced. As this fixes some portions
of tableam.h, that is mentioned in the docs as something to look at when
implementing a table AM, backpatch down to 12 where this has been
introduced.
Author: Hironobu Suzuki
Discussion: https://postgr.es/m/8fe6d672-28dd-3f1d-7aed-ac2f6d599d3f@interdb.jp
Backpatch-through: 12
Use separate functions to save and restore error context information as
that made code easier to understand. Also, make it clear that the index
information required for error context is sane.
Author: Andres Freund, Justin Pryzby, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1LWo+v1OWu=Sky27GTGSCuOmr7iaURNbc5xz6jO+SaPeA@mail.gmail.com
Rewrite the documentation of these functions, in light of recent bug fix
commit 5940ffb2.
Back-patch to 13 where the check-for-conflict-out code was split up into
AM-specific and generic parts, and new documentation was added that now
looked wrong.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
SSI's HeapCheckForSerializableConflictOut() test failed to correctly
handle conditions involving a concurrently inserted tuple which is later
concurrently updated by a separate transaction . A SELECT statement
that called HeapCheckForSerializableConflictOut() could end up using the
same XID (updater's XID) for both the original tuple, and the successor
tuple, missing the XID of the xact that created the original tuple
entirely. This only happened when neither tuple from the chain was
visible to the transaction's MVCC snapshot.
The observable symptoms of this bug were subtle. A pair of transactions
could commit, with the later transaction failing to observe the effects
of the earlier transaction (because of the confusion created by the
update to the non-visible row). This bug dates all the way back to
commit dafaa3ef, which added SSI.
To fix, make sure that we check the xmin of concurrently inserted tuples
that happen to also have been updated concurrently.
Author: Peter Geoghegan
Reported-By: Kyle Kingsbury
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443@jepsen.io
Backpatch: All supported versions
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
There's a very low risk that RecentGlobalXmin could be far enough in
the past to be older than relfrozenxid, or even wrapped
around. Luckily the consequences of that having happened wouldn't be
too bad - the page wouldn't be pruned for a while.
Avoid that risk by using TransactionXmin instead. As that's announced
via MyPgXact->xmin, it is protected against wrapping around (see code
comments for details around relfrozenxid).
Author: Andres Freund
Discussion: https://postgr.es/m/20200328213023.s4eyijhdosuc4vcj@alap3.anarazel.de
Backpatch: 9.5-
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This allows gathering the WAL generation statistics for each statement
execution. The three statistics that we collect are the number of WAL
records, the number of full page writes and the amount of WAL bytes
generated.
This helps the users who have write-intensive workload to see the impact
of I/O due to WAL. This further enables us to see approximately what
percentage of overall WAL is due to full page writes.
In the future, we can extend this functionality to allow us to compute the
the exact amount of WAL data due to full page writes.
This patch in itself is just an infrastructure to compute WAL usage data.
The upcoming patches will expose this data via explain, auto_explain,
pg_stat_statements and verbose (auto)vacuum output.
Author: Kirill Bychik, Julien Rouhaud
Reviewed-by: Dilip Kumar, Fujii Masao and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Commit 40d964ec99 allowed vacuum command to process indexes in parallel but
forgot to accumulate the buffer usage stats of parallel workers. This
allows leader backend to accumulate buffer usage stats of all the parallel
workers.
Reported-by: Julien Rouhaud
Author: Sawada Masahiko
Reviewed-by: Dilip Kumar, Amit Kapila and Julien Rouhaud
Discussion: https://postgr.es/m/20200328151721.GB12854@nol
vacuum code.
After commit b61d161c14, during vacuum, we cache the information of
relation name and relation namespace in local structure LVRelStats so that
we can use it in an error callback function. We can use the cached
information to avoid the calls to RelationGetRelationName(),
RelationGetNamespace() and get_namespace_name(). This is mainly for the
consistent in vacuum code path but it will avoid the extra syscache lookup
we do in get_namespace_name().
Author: Justin Pryzby
Reviewed-by: Amit Kapila
Discussion: https://www.postgresql.org/message-id/20191120210600.GC30362@telsasoft.com
This reverts commit 2aa6e33, that added a fast path to skip
anti-wraparound and non-aggressive autovacuum jobs (these have no sense
as anti-wraparound implies aggressive). With a cluster using a high
amount of relations with a portion of them being heavily updated, this
could cause autovacuum to lock down, with autovacuum workers attempting
repeatedly those jobs on the same relations for the same database, that
just kept being skipped. This lock down can be solved with a manual
VACUUM FREEZE.
Justin King has reported one environment where the issue happened, and
Julien Rouhaud and I have been able to reproduce it in a second
environment. With a very aggressive autovacuum_freeze_max_age,
triggering those jobs with pgbench is a matter of minutes, and hitting
the lock down is a lot harder (my local tests failed to do that).
Note that anti-wraparound and non-aggressive jobs can only be triggered
on a subset of shared catalogs:
- pg_auth_members
- pg_authid
- pg_database
- pg_replication_origin
- pg_shseclabel
- pg_subscription
- pg_tablespace
While the lock down was possible down to v12, the root cause of those
jobs is a much older issue, which needs more analysis.
Bonus thanks to Andres Freund for the discussion.
Reported-by: Justin King
Discussion: https://postgr.es/m/CAE39h22zPLrkH17GrkDgAYL3kbjvySYD1io+rtnAUFnaJJVS4g@mail.gmail.com
Backpatch-through: 12
The recheck isn't needed anymore, as RelationGetBufferForTuple() now
extends the relation with RBM_ZERO_AND_LOCK. Previously we needed to
handle the fact that relation extension extended the relation and then
separately acquired a lock on the page - while expecting that the page
is empty.
Reported-By: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQArA_=J0D5T258xsCY6Xtf6wiH4b=QDPDgVS+WZUN10WDw@mail.gmail.com
The additional information displayed will be block number for error
occurring while processing heap and index name for error occurring
while processing the index.
This will help us in diagnosing the problems that occur during a vacuum.
For ex. due to corruption (either caused by bad hardware or by some bug)
if we get some error while vacuuming, it can help us identify the block
in heap and or additional index information.
It sets up an error context callback to display additional information
with the error. During different phases of vacuum (heap scan, heap
vacuum, index vacuum, index clean up, heap truncate), we update the error
context callback to display appropriate information. We can extend it to
a bit more granular level like adding the phases for FSM operations or for
prefetching the blocks while truncating. However, I felt that it requires
adding many more error callback function calls and can make the code a bit
complex, so left those for now.
Author: Justin Pryzby, with few changes by Amit Kapila
Reviewed-by: Alvaro Herrera, Amit Kapila, Andres Freund, Michael Paquier
and Sawada Masahiko
Discussion: https://www.postgresql.org/message-id/20191120210600.GC30362@telsasoft.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Introduce a GUC and a tablespace option to control I/O prefetching, much
like effective_io_concurrency, but for work that is done on behalf of
many client sessions.
Use the new setting in heapam.c instead of the hard-coded formula
effective_io_concurrency + 10 introduced by commit 558a9165e0. Go with
a default value of 10 for now, because it's a round number pretty close
to the value used for that existing case.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
Multi-insert for heap is not yet used actively for catalogs, but the
code to support this case is in place for logical decoding. The
existing code forgot to issue a XLOG_HEAP2_NEW_CID record for the first
tuple inserted, leading to failures when attempting to use multiple
inserts for catalogs at decoding time. This commit fixes the problem by
WAL-logging the needed CID.
This is not an active bug, so no back-patch is done.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/E0D4CC67-A1CF-4DF4-991D-B3AC2EB5FAE9@yesql.se
VACUUM may truncate heap in several batches. The activity report
is logged for each batch, and contains the number of pages in the table
before and after the truncation, and also the elapsed time during
the truncation. Previously the elapsed time reported in each batch was
the total elapsed time since starting the truncation until finishing
each batch. For example, if the truncation was processed dividing into
three batches, the second batch reported the accumulated time elapsed
during both first and second batches. This is strange and confusing
because the number of pages in the table reported together is not
total. Instead, each batch should report the time elapsed during
only that batch.
The cause of this issue was that the resource usage snapshot was
initialized only at the beginning of the truncation and was never
reset later. This commit fixes the issue by changing VACUUM so that
the resource usage snapshot is reset at each batch.
Back-patch to all supported branches.
Reported-by: Tatsuhito Kasahara
Author: Tatsuhito Kasahara
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/CAP0=ZVJsf=NvQuy+QXQZ7B=ZVLoDV_JzsVC1FRsF1G18i3zMGg@mail.gmail.com
Using 32 bit counters means they can now realistically wrap around when
vacuuming extremely large tables. Because they're signed integers,
stats printed by vacuum look very odd when they do.
We'd love to backpatch this, but refrain because the variables are
exported and could cause third-party code to break.
Reviewed-by: Julien Rouhaud, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20200131205926.GA16367@alvherre.pgsql
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
The following changes make the predicate locking functions more
generic and suitable for use by future access methods:
- PredicateLockTuple() is renamed to PredicateLockTID(). It takes
ItemPointer and inserting transaction ID instead of HeapTuple.
- CheckForSerializableConflictIn() takes blocknum instead of buffer.
- CheckForSerializableConflictOut() no longer takes HeapTuple or buffer.
Author: Ashwin Agrawal
Reviewed-by: Andres Freund, Kuntal Ghosh, Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
In commit 40d964ec99, we changed the way memory is allocated for dead
tuples but forgot to update the place where we compute the maximum
number of dead tuples. This could lead to invalid memory requests.
Reported-by: Andres Freund
Diagnosed-by: Andres Freund
Author: Masahiko Sawada
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/20200121060020.e3cr7s7fj5rw4lok@alap3.anarazel.de
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
Instead of always calling heap_fetch_toast_slice during detoasting,
invoke a table AM callback which, when the toast table is a heap
table, will be heap_fetch_toast_slice.
This makes it possible for a table AM other than heap to be used
as a TOAST table. It also completes the series of commits intended
to improve the interaction of tableam with TOAST that began with
commit 8b94dab06617ef80a0901ab103ebd8754427ef5a; detoast.c is
now, hopefully, fully AM-independent.
Patch by me, reviewed by Andres Freund and Peter Eisentraut.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Previously, the toast table had to be implemented by the same AM that
was used for the main table, which was bad, because the detoasting
code won't work with anything but heap. This commit doesn't fix the
latter problem, although there's another patch coming which does,
but it does let you pick something that works (i.e. heap, right now).
Patch by me, reviewed by Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The part in charge of doing the vacuum on all the indexes of a relation
was duplicated, with the same handling for progress reporting done.
While on it, update the progress reporting for heap vacuuming in the
subroutine doing the actual work, keeping the status update local. This
way, any future caller of lazy_vacuum_heap() does not have to worry
about doing any progress reporting update.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20191120210600.GC30362@telsasoft.com
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
This has been introduced by c16dc1a since progress reporting for VACUUM
has been added. As this issue just causes some extra work and is
harmless, no backpatch is done.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20191213030831.GT2082@telsasoft.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
The file descriptor was opened with read-only to fsync a regular file,
which would cause EBADFD errors on some platforms.
This is similar to the recent fix done by a586cc4b (which was broken by
me with 82a5649), except that I noticed this issue while monitoring the
backend code for similar mistakes. Backpatch to 9.4, as this has been
introduced since logical decoding exists as of b89e151.
Author: Michael Paquier
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20191006045548.GA14532@paquier.xyz
Backpatch-through: 9.4
The old names for the attribute-detoasting functions names included
the word "heap," which seems outdated now that the heap is only one of
potentially many table access methods.
On the other hand, toast_insert_or_update and toast_delete are
heap-specific, so rename them by adding "heap_" as a prefix.
Not all of the work of making the TOAST system fully accessible to AMs
other than the heap is done yet, but there seems to be little harm in
getting this renaming out of the way now. Commit
8b94dab066 already divided up the
functions among various files partially according to whether it was
intended that they should be heap-specific or AM-agnostic, so this is
just clarifying the division contemplated by that commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
When a relation is truncated, shared_buffers needs to be scanned
so that any buffers for the relation forks are invalidated in it.
Previously, shared_buffers was scanned for each relation forks, i.e.,
MAIN, FSM and VM, when VACUUM truncated off any empty pages
at the end of relation or TRUNCATE truncated the relation in place.
Since shared_buffers needed to be scanned multiple times,
it could take a long time to finish those commands especially
when shared_buffers was large.
This commit changes the logic so that shared_buffers is scanned only
one time for those three relation forks.
Author: Kirk Jamison
Reviewed-by: Masahiko Sawada, Thomas Munro, Alvaro Herrera, Takayuki Tsunakawa and Fujii Masao
Discussion: https://postgr.es/m/D09B13F772D2274BB348A310EE3027C64E2067@g01jpexmbkw24
This moves much of the non-heap-specific logic from toast_delete and
toast_insert_or_update into a helper functions accessible via a new
header, toast_helper.h. Using the functions in this module, a table
AM can implement creation and deletion of TOAST table rows with
much less code duplication than was possible heretofore. Some
table AMs won't want to use the TOAST logic at all, but for those
that do this will make that easier.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
detoast.c/h contain functions required to detoast a datum, partially
or completely, plus a few other utility functions for examining the
size of toasted datums.
toast_internals.c/h contain functions that are used internally to the
TOAST subsystem but which (mostly) do not need to be accessed from
outside.
heaptoast.c/h contains code that is intrinsically specific to the
heap AM, either because it operates on HeapTuples or is based on the
layout of a heap page.
detoast.c and toast_internals.c are placed in
src/backend/access/common rather than src/backend/access/heap. At
present, both files still have dependencies on the heap, but that will
be improved in a future commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
In what seems like a fit of misplaced optimization,
ExtractReplicaIdentity() accessed the relation's replica-identity
index without taking any lock on it. Usually, the surrounding query
already holds some lock so this is safe enough ... but in the case
of a previously-planned delete, there might be no existing lock.
Given a suitable test case, this is exposed in v12 and HEAD by an
assertion added by commit b04aeb0a0.
The whole thing's rather poorly thought out anyway; rather than
looking directly at the index, we should use the index-attributes
bitmap that's held by the parent table's relcache entry, as the
caller functions do. This is more consistent and likely a bit
faster, since it avoids a cache lookup. Hence, change to doing it
that way.
While at it, rather than blithely assuming that the identity
columns are non-null (with catastrophic results if that's wrong),
add assertion checks that they aren't null. Possibly those should
be actual test-and-elog, but I'll leave it like this for now.
In principle, this is a bug that's been there since this code was
introduced (in 9.4). In practice, the risk seems quite low, since
we do have a lock on the index's parent table, so concurrent
changes to the index's catalog entries seem unlikely. Given the
precedent that commit 9c703c169 wasn't back-patched, I won't risk
back-patching this further than v12.
Per report from Hadi Moshayedi.
Discussion: https://postgr.es/m/CAK=1=Wrek44Ese1V7LjKiQS-Nd-5LgLi_5_CskGbpggKEf3tKQ@mail.gmail.com
In serializable mode, heap_hot_search_buffer() incorrectly acquired a
predicate lock on the root tuple, not the returned tuple that satisfied
the visibility checks. As explained in README-SSI, the predicate lock does
not need to be copied or extended to other tuple versions, but for that to
work, the correct, visible, tuple version must be locked in the first
place.
The original SSI commit had this bug in it, but it was fixed back in 2013,
in commit 81fbbfe335. But unfortunately, it was reintroduced a few months
later in commit b89e151054. Wising up from that, add a regression test
to cover this, so that it doesn't get reintroduced again. Also, move the
code that sets 't_self', so that it happens at the same time that the
other HeapTuple fields are set, to make it more clear that all the code in
the loop operate on the "current" tuple in the chain, not the root tuple.
Bug spotted by Andres Freund, analysis and original fix by Thomas Munro,
test case and some additional changes to the fix by Heikki Linnakangas.
Backpatch to all supported versions (9.4).
Discussion: https://www.postgresql.org/message-id/20190731210630.nqhszuktygwftjty%40alap3.anarazel.de
Most block-based table AMs will need the exact same implementation of
the relation_size callback as the heap, and if they use a standard
page layout, they will likely need an implementation of the
relation_estimate_size callback that is very similar to that of the
heap. Rearrange to facilitate code reuse.
Patch by me, reviewed by Michael Paquier, Daniel Gustafsson, and
Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZ6DBPnP1E-vRpQZUJQijJFD54F+SR_pxGiAAS-MyrigA@mail.gmail.com
This fixes an embarrassing oversight I (Andres) made in 737a292b,
namely missing two place where liverows/deadrows were used when
converting those variables to pointers, leading to incrementing the
pointer, rather than the value.
It's not that actually that easy to trigger a crash: One needs tuples
deleted by the current transaction, followed by a tuple deleted in
another session, all in one page. Which is presumably why this hasn't
been noticed before.
Reported-By: Steve Singer
Author: Steve Singer
Discussion: https://postgr.es/m/c7988239-d42c-ddc4-41db-171b23b35e4f@ssinger.info
This puts back reverted commit de87a084c0, with some bug fixes.
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for T1
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for T1
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once T1 releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after T1 finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
Discussion: https://postgr.es/m/2815.1560521451@sss.pgh.pa.us
This reverts commits 3da73d6839 and de87a084c0.
This code has some tricky corner cases that I'm not sure are correct and
not properly tested anyway, so I'm reverting the whole thing for next
week's releases (reintroducing the deadlock bug that we set to fix).
I'll try again afterwards.
Discussion: https://postgr.es/m/E1hbXKQ-0003g1-0C@gemulon.postgresql.org
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for X
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for X
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once X releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after X finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
Some of the wrapper functions didn't match the callback names. Many of
them due to staying "consistent" with historic naming of the wrapped
functionality. We decided that for most cases it's more important to
be for tableam to be consistent going forward, than with the past.
The one exception is beginscan/endscan/... because it'd have looked
odd to have systable_beginscan/endscan/... with a different naming
scheme, and changing the systable_* APIs would have caused way too
much churn (including breaking a lot of external users).
Author: Ashwin Agrawal, with some small additions by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CALfoeiugyrXZfX7n0ORCa4L-m834dzmaE8eFdbNR6PMpetU4Ww@mail.gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Before this commit, when ANALYZE was run on a table and serializable
was used (either by virtue of an explicit BEGIN TRANSACTION ISOLATION
LEVEL SERIALIZABLE, or default_transaction_isolation being set to
serializable) a null pointer dereference lead to a crash.
The analyze scan doesn't need a snapshot (nor predicate locking), but
before this commit a scan only contained information about being a
bitmap or sample scan.
Refactor the option passing to the scan_begin callback to use a
bitmask instead. Alternatively we could have added a new boolean
parameter, but that seems harder to read. Even before this issue
various people (Heikki, Tom, Robert) suggested doing so.
These changes don't change the scan APIs outside of tableam. The flags
argument could be exposed, it's not necessary to fix this
problem. Also the wrapper table_beginscan* functions encapsulate most
of that complexity.
After these changes fixing the bug is trivial, just don't acquire
predicate lock for analyze style scans. That was already done for
bitmap heap scans. Add an assert that a snapshot is passed when
acquiring the predicate lock, so this kind of bug doesn't require
running with serializable.
Also add a comment about sample scans currently requiring predicate
locking the entire relation, that previously wasn't remarked upon.
Reported-By: Joe Wildish
Author: Andres Freund
Discussion:
https://postgr.es/m/4EA80A20-E9BF-49F1-9F01-5B66CAB21453@elusive.cxhttps://postgr.es/m/20190411164947.nkii4gaeilt4bui7@alap3.anarazel.dehttps://postgr.es/m/20190518203102.g7peu2fianukjuxm@alap3.anarazel.de
Instead add a tableam callback to do so. To avoid adding per
validation overhead, pass a scan to tuple_tid_valid. In heap's case
we'd otherwise incurred a RelationGetNumberOfBlocks() call for each
tid - which'd have added noticable overhead to nodeTidscan.c.
Author: Andres Freund
Reviewed-By: Ashwin Agrawal
Discussion: https://postgr.es/m/20190515185447.gno2jtqxyktylyvs@alap3.anarazel.de
Previously various parts of the code routed size requests through
RelationGetNumberOfBlocks[InFork]. That works if md.c is used by the
AM, but not otherwise.
Add a tableam callback to return the size of the table. As not every
AM will use postgres' BLCKSZ, have it return bytes, and have
RelationGetNumberOfBlocksInFork() round the byte size up into blocks.
To allow code outside of the AM to determine the actual relation size
map InvalidForkNumber the total size of a relation, as not every AM
might just need the postgres defined forks.
A few users of RelationGetNumberOfBlocks() ought to be converted away
from that. One case, the use of it to determine whether a tid is
valid, will be fixed in a follow up commit. Others will have to wait
for v13.
Author: Andres Freund
Discussion: https://postgr.es/m/20190423225201.3bbv6tbqzkb5w7cw@alap3.anarazel.de
For some reason both callsite and the implementation for heapam had
the meaning inverted (i.e. succeeded == true was passed in case of
conflict). That's confusing.
I (Andres) briefly pondered whether it'd be better to rename
table_complete_speculative's argument to 'bool specConflict' or such,
but decided not to. The 'complete' in the function name for me makes
`succeeded` sound a bit better.
Reported-By: Ashwin Agrawal, Melanie Plageman, Heikki Linnakangas
Discussion:
https://postgr.es/m/CALfoeitk7-TACwYv3hCw45FNPjkA86RfXg4iQ5kAOPhR+F1Y4w@mail.gmail.comhttps://postgr.es/m/97673451-339f-b21e-a781-998d06b1067c@iki.fi
The conditions listed in this comment have changed several times, and at
some point the thing that the "if so" referred to was negated.
The text was OK up to 9.6. It was differently wrong in v10, v11 and
master, so fix in all those versions.
The term "item pointer" should not be used to refer to ItemIdData
variables, since that is needlessly ambiguous. Only
ItemPointerData/ItemPointer variables should be called item pointers.
To fix, establish the convention that ItemIdData variables should always
be referred to either as "item identifiers" or "line pointers". The
term "item identifier" already predominates in docs and translatable
messages, and so should be the preferred alternative there.
Discussion: https://postgr.es/m/CAH2-Wz=c=MZQjUzde3o9+2PLAPuHTpVZPPdYxN=E4ndQ2--8ew@mail.gmail.com
This commit adds new parameter to VACUUM command, TRUNCATE,
which specifies that VACUUM should attempt to truncate off
any empty pages at the end of the table and allow the disk space
for the truncated pages to be returned to the operating system.
This parameter, if specified, overrides the vacuum_truncate
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoD+qtrSDL=GSma4Wd3kLYLeRC0hPna-YAdkDeV4z156vg@mail.gmail.com
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/20190416180452.3pm6uegx54iitbt5@alap3.anarazel.de
Commit d2599ecfcc introduced some contorted, confused code around:
readers would think that it's possible for HeapTupleHeaderGetXmin return
a non-frozen value for some frozen tuples, which would be disastrous.
There's no actual bug, but it seems better to make it clearer.
Per gripe from Tom Lane and Andres Freund.
Discussion: https://postgr.es/m/30116.1555430496@sss.pgh.pa.us
The new nleft_dead_tuples and nleft_dead_itemids fields are confusing
and do not seem like the correct way forward. One of them is tested
via an assertion that can fail, as it has already done on buildfarm
member topminnow. Remove the assertion and the fields.
Change the logic for the case where a tuple is not initially pruned
by heap_page_prune but later diagnosed HEAPTUPLE_DEAD by
HeapTupleSatisfiesVacuum. Previously, tupgone = true was set in
that case, which leads to treating the tuple as one that will be
removed. In a normal vacuum, that's OK, because we'll remove
index entries for it and then the second heap pass will remove the
tuple itself, but when index cleanup is disabled, those things
don't happen, so we must instead treat it as a recently-dead
tuple that we have voluntarily chosen to keep.
Report and analysis by Tom Lane. This patch loosely based on one
from Masahiko Sawada, but I changed most of it.
Most of these stem from d25f519107 "tableam: relation creation, VACUUM
FULL/CLUSTER, SET TABLESPACE.".
1) To pass data to the relation_set_new_filenode()
RelationSetNewRelfilenode() was made to update RelationData.rd_rel
directly. That's not OK however, as it makes the relcache entries
temporarily inconsistent. Which among other scenarios is a problem
if a REINDEX targets an index on pg_class - the
CatalogTupleUpdate() in RelationSetNewRelfilenode(). Presumably
that was introduced because other places in the code do so - while
those aren't "good practice" they don't appear to be actively
buggy (e.g. because system tables may not be targeted).
I (Andres) should have caught this while reviewing and signficantly
evolving the code in that commit, mea culpa.
Fix that by instead passing in the new RelFileNode as separate
argument to relation_set_new_filenode() and rely on the relcache to
update the catalog entry. Also revert that the
RelationMapUpdateMap() call was changed to immediate, and undo some
other more unnecessary changes.
2) Document that the relation_set_new_filenode cannot rely on the
whole relcache entry to be valid. It might be worthwhile to
refactor the code to never have to rely on that, but given the way
heap_create() is currently coded, that'd be a large change.
3) ATExecSetTableSpace() shouldn't do FlushRelationBuffers() itself. A
table AM might not use shared buffers at all. Move to
index_copy_data() and heapam_relation_copy_data().
4) heapam_relation_set_new_filenode() previously sometimes accessed
rel->rd_rel->relpersistence rather than the `persistence`
argument. Code movement mistake.
5) Previously heapam_relation_set_new_filenode() re-opened the smgr
relation to create the init for, if necesary. Instead have
RelationCreateStorage() return the SMgrRelation and use it to
create the init fork.
6) Add a note about the danger of modifying the relcache directly to
ATExecSetTableSpace() - it's currently not a bug because there's a
check ERRORing for catalog tables.
Regression tests and assertion improvements that together trigger the
bug described in 1) will be added in a later commit, as there is a
related bug on all branches.
Reported-By: Michael Paquier
Diagnosed-By: Tom Lane and Andres Freund
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20190418011430.GA19133@paquier.xyz
This allows table AMs that don't need these horizons. This was already
documented in the tableam relation_set_new_filenode callback, but an
assert prevented if from actually working (the test AM code contained
the change itself). Defang the asserts in the general code, and move
the stronger ones into heap AM.
Relatedly, after CLUSTER/VACUUM, we'd always assign a relfrozenxid /
relminmxid. Change the table_relation_copy_for_cluster() interface to
allow the AM to overwrite the horizons that get set on the pg_class
entry. This'd also in the future allow AMs like heap to compute a
relfrozenxid during rewrite that's the table's actual minimum rather
than a pre-determined value. Arguably it'd have been better to move
the whole computation / setting of those values into the callback, but
it seems likely that for other reasons it'd be better to be able to
use one value to vacuum/cluster multiple tables (e.g. a toast's
horizon shouldn't be different than the table's).
Reported-By: Heikki Linnakangas
Author: Andres Freund
Discussion: https://postgr.es/m/9a7fb9cc-2419-5db7-8840-ddc10c93f122@iki.fi
vacuum_truncate controls whether vacuum tries to truncate off
any empty pages at the end of the table. Previously vacuum always
tried to do the truncation. However, the truncation could cause
some problems; for example, ACCESS EXCLUSIVE lock needs to
be taken on the table during the truncation and can cause
the query cancellation on the standby even if hot_standby_feedback
is true. Setting this reloption to false can be helpful to avoid
such problems.
Author: Tsunakawa Takayuki
Reviewed-By: Julien Rouhaud, Masahiko Sawada, Michael Paquier, Kirk Jamison and Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwE5UqFqSq1=kV3QtTUtXphTdyHA-8rAj4A=Y+e4kyp3BQ@mail.gmail.com
This commit fixes three, unfortunately related, issues:
1) Since 5db6df0c01, the introduction of DML via tableam, it was
possible to trigger "ERROR: unexpected table_lock_tuple status: 1"
when updating a row that was previously updated in the same
transaction - but only when the previously updated row was before
updated in a concurrent transaction (and READ COMMITTED was
used). The reason for that was that that case simply wasn't
expected. Fixing that lead to:
2) Even before the above commit, there were error checks (introduced
in 6868ed7491) preventing a row being updated by different
commands within the same statement (say in a function called by an
UPDATE) - but that check wasn't performed when the row was first
updated in a concurrent transaction - instead the second update was
silently skipped in that case. After this change we throw the same
error as we'd without the concurrent transaction.
3) The error messages (introduced in 6868ed7491) preventing such
updates emitted the same error message for both DELETE and
UPDATE ("tuple to be updated was already modified by an operation
triggered by the current command"). While that could be changed
separately, it made it hard to write tests that verify the correct
correct behavior of the code.
This commit changes heap's implementation of table_lock_tuple() to
return TM_SelfModified instead of TM_Invisible (previously loosely
modeled after EvalPlanQualFetch), and teaches nodeModifyTable.c to
handle that in response to table_lock_tuple() and not just in response
to table_(delete|update).
Additionally it fixes the wrong error message (see 3 above). The
comment for table_lock_tuple() is also adjusted to state that
TM_Deleted won't return information in TM_FailureData - it'll not
always be available.
This also adds tests to ensure that DELETE/UPDATE correctly error out
when affecting a row that concurrently was modified by another
transaction.
Author: Andres Freund
Reported-By: Tom Lane, when investigating a bug bug fix to another bug
by Amit Langote
Discussion: https://postgr.es/m/19321.1554567786@sss.pgh.pa.us
This adds table_multi_insert(), and converts COPY FROM, the only user
of heap_multi_insert, to it.
A simple conversion of COPY FROM use slots would have yielded a
slowdown when inserting into a partitioned table for some
workloads. Different partitions might need different slots (both slot
types and their descriptors), and dropping / creating slots when
there's constant partition changes is measurable.
Thus instead revamp the COPY FROM buffering for partitioned tables to
allow to buffer inserts into multiple tables, flushing only when
limits are reached across all partition buffers. By only dropping
slots when there've been inserts into too many different partitions,
the aforementioned overhead is gone. By allowing larger batches, even
when there are frequent partition changes, we actuall speed such cases
up significantly.
By using slots COPY of very narrow rows into unlogged / temporary
might slow down very slightly (due to the indirect function calls).
Author: David Rowley, Andres Freund, Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20190327054923.t3epfuewxfqdt22e@alap3.anarazel.de
This commit adds a new reloption, vacuum_index_cleanup, which
controls whether index cleanup is performed for a particular
relation by default. It also adds a new option to the VACUUM
command, INDEX_CLEANUP, which can be used to override the
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Masahiko Sawada, reviewed and tested by Nathan Bossart, Alvaro
Herrera, Kyotaro Horiguchi, Darafei Praliaskouski, and me.
The wording of the documentation is mostly due to me.
Discussion: http://postgr.es/m/CAD21AoAt5R3DNUZSjOoXDUY=naYPUOuffVsRzuTYMz29yLzQCA@mail.gmail.com
Valgrind was rightly complaining that IndexVacuumInfo->report_progress
(added by commit ab0dfc961b) was not being initialized in some code
paths. Repair.
Per buildfarm member lousyjack.
This uses the progress reporting infrastructure added by c16dc1aca5,
adding support for CREATE INDEX and CREATE INDEX CONCURRENTLY.
There are two pieces to this: one is index-AM-agnostic, and the other is
AM-specific. The latter is fairly elaborate for btrees, including
reportage for parallel index builds and the separate phases that btree
index creation uses; other index AMs, which are much simpler in their
building procedures, have simplistic reporting only, but that seems
sufficient, at least for non-concurrent builds.
The index-AM-agnostic part is fairly complete, providing insight into
the CONCURRENTLY wait phases as well as block-based progress during the
index validation table scan. (The index validation index scan requires
patching each AM, which has not been included here.)
Reviewers: Rahila Syed, Pavan Deolasee, Tatsuro Yamada
Discussion: https://postgr.es/m/20181220220022.mg63bhk26zdpvmcj@alvherre.pgsql
When asked for a slice of a TOAST entry, decompress enough to return the
slice instead of decompressing the entire object.
For use cases where the slice is at, or near, the beginning of the entry,
this avoids a lot of unnecessary decompression work.
This changes the signature of pglz_decompress() by adding a boolean to
indicate if it's ok for the call to finish before consuming all of the
source or destination buffers.
Author: Paul Ramsey
Reviewed-By: Rafia Sabih, Darafei Praliaskouski, Regina Obe
Discussion: https://postgr.es/m/CACowWR07EDm7Y4m2kbhN_jnys%3DBBf9A6768RyQdKm_%3DNpkcaWg%40mail.gmail.com
This replaces the previous calls of heap_sync() in places using
bulk-insert. By passing in the flags used for bulk-insert the AM can
decide (first at insert time and then during the finish call) which of
the optimizations apply to it, and what operations are necessary to
finish a bulk insert operation.
Also change HEAP_INSERT_* flags to TABLE_INSERT, and rename hi_options
to ti_options.
These changes are made even in copy.c, which hasn't yet been converted
to tableam. There's no harm in doing so.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This moves bitmap heap scan support to below an optional tableam
callback. It's optional as the whole concept of bitmap heapscans is
fairly block specific.
This basically moves the work previously done in bitgetpage() into the
new scan_bitmap_next_block callback, and the direct poking into the
buffer done in BitmapHeapNext() into the new scan_bitmap_next_tuple()
callback.
The abstraction is currently somewhat leaky because
nodeBitmapHeapscan.c's prefetching and visibilitymap based logic
remains - it's likely that we'll later have to move more into the
AM. But it's not trivial to do so without introducing a significant
amount of code duplication between the AMs, so that's a project for
later.
Note that now nodeBitmapHeapscan.c and the associated node types are a
bit misnamed. But it's not clear whether renaming wouldn't be a cure
worse than the disease. Either way, that'd be best done in a separate
commit.
Author: Andres Freund
Reviewed-By: Robert Haas (in an older version)
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This moves sample scan support to below tableam. It's not optional as
there is, in contrast to e.g. bitmap heap scans, no alternative way to
perform tablesample queries. If an AM can't deal with the block based
API, it will have to throw an ERROR.
The tableam callbacks for this are block based, but given the current
TsmRoutine interface, that seems to be required.
The new interface doesn't require TsmRoutines to perform visibility
checks anymore - that requires the TsmRoutine to know details about
the AM, which we want to avoid. To continue to allow taking the
returned number of tuples account SampleScanState now has a donetuples
field (which previously e.g. existed in SystemRowsSamplerData), which
is only incremented after the visibility check succeeds.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
An anti-wraparound vacuum has to be by definition aggressive as it needs
to work on all the pages of a relation. However it can happen that due
to some concurrent activity an anti-wraparound vacuum is marked as
non-aggressive, which makes it redundant with a previous run, and
it is actually useless as an anti-wraparound vacuum should process all
the pages of a relation. This commit makes such vacuums to be skipped.
An anti-wraparound vacuum not aggressive can be found easily by mixing
low values of autovacuum_freeze_max_age (to control anti-wraparound) and
autovacuum_freeze_table_age (to control the aggressiveness).
28a8fa9 has added some extra logging printing all the possible
combinations of anti-wraparound and aggressive vacuums, which now gets
simplified as an anti-wraparound vacuum also non-aggressive gets
skipped.
Per discussion mainly between Andrew Dunstan, Robert Haas, Álvaro
Herrera, Kyotaro Horiguchi, Masahiko Sawada, and myself.
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Andrew Dunstan, Álvaro Herrera
Discussion: https://postgr.es/m/20180914153554.562muwr3uwujno75@alvherre.pgsql
This just moves the table/matview[/toast] determination of relation
size to a callback, and uses a copy of the existing logic to implement
that callback for heap.
It probably would make sense to also move the index specific logic
into a callback, so the metapage handling (and probably more) can be
index specific. But that's a separate task.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This is a relatively straightforward move of the current
implementation to sit below tableam. As the current analyze sampling
implementation is pretty inherently block based, the tableam analyze
interface is as well. It might make sense to generalize that at some
point, but that seems like a larger project that shouldn't be
undertaken at the same time as the introduction of tableam.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This moves the responsibility for:
- creating the storage necessary for a relation, including creating a
new relfilenode for a relation with existing storage
- non-transactional truncation of a relation
- VACUUM FULL / CLUSTER's rewrite of a table
below tableam.
This is fairly straight forward, with a bit of complexity smattered in
to move the computation of xid / multixid horizons below the AM, as
they don't make sense for every table AM.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
To support building indexes over tables of different AMs, the scans to
do so need to be routed through the table AM. While moving a fair
amount of code, nearly all the changes are just moving code to below a
callback.
Currently the range based interface wouldn't make much sense for non
block based table AMs. But that seems aceptable for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Previously the xid horizon was only computed during WAL replay. That
had two major problems:
1) It relied on knowing what the table pointed to looks like. That was
easy enough before the introducing of tableam (we knew it had to be
heap, although some trickery around logging the heap relfilenodes
was required). But to properly handle table AMs we need
per-database catalog access to look up the AM handler, which
recovery doesn't allow.
2) Not knowing the xid horizon also makes it hard to support logical
decoding on standbys. When on a catalog table, we need to be able
to conflict with slots that have an xid horizon that's too old. But
computing the horizon by visiting the heap only works once
consistency is reached, but we always need to be able to detect
conflicts.
There's also a secondary problem, in that the current method performs
redundant work on every standby. But that's counterbalanced by
potentially computing the value when not necessary (either because
there's no standby, or because there's no connected backends).
Solve 1) and 2) by moving computation of the xid horizon to the
primary and by involving tableam in the computation of the horizon.
To address the potentially increased overhead, increase the efficiency
of the xid horizon computation for heap by sorting the tids, and
eliminating redundant buffer accesses. When prefetching is available,
additionally perform prefetching of buffers. As this is more of a
maintenance task, rather than something routinely done in every read
only query, we add an arbitrary 10 to the effective concurrency -
thereby using IO concurrency, when not globally enabled. That's
possibly not the perfect formula, but seems good enough for now.
Bumps WAL format, as latestRemovedXid is now part of the records, and
the heap's relfilenode isn't anymore.
Author: Andres Freund, Amit Khandekar, Robert Haas
Reviewed-By: Robert Haas
Discussion:
https://postgr.es/m/20181212204154.nsxf3gzqv3gesl32@alap3.anarazel.dehttps://postgr.es/m/20181214014235.dal5ogljs3bmlq44@alap3.anarazel.dehttps://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
After 71bdc99d0d, "tableam: Add helper for indexes to check if a
corresponding table tuples exist." there's no in-core user left. As
there's unlikely to be an external user, and such an external user
could easily be adjusted to use table_index_fetch_tuple_check(),
remove heap_hot_search().
Per complaint from Peter Geoghegan
Author: Andres Freund
Discussion: https://postgr.es/m/CAH2-Wzn0Oq4ftJrTqRAsWy2WGjv0QrJcwoZ+yqWsF_Z5vjUBFw@mail.gmail.com
This primarily is to allow WHERE CURRENT OF to continue to work as it
currently does. It's not clear to me that these semantics make sense
for every AM, but it works for the in-core heap, and the out of core
zheap. We can refine it further at a later point if necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This is essentially the tableam version of heapam_fetch(),
i.e. fetching a tuple identified by a tid, performing visibility
checks.
Note that this different from table_index_fetch_tuple(), which is for
index lookups. It therefore has to handle a tid pointing to an earlier
version of a tuple if the AM uses an optimization like heap's HOT. Add
comments to that end.
This commit removes the stats_relation argument from heap_fetch, as
it's been unused for a long time.
Author: Andres Freund
Reviewed-By: Haribabu Kommi
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This adds new, required, table AM callbacks for insert/delete/update
and lock_tuple. To be able to reasonably use those, the EvalPlanQual
mechanism had to be adapted, moving more logic into the AM.
Previously both delete/update/lock call-sites and the EPQ mechanism had
to have awareness of the specific tuple format to be able to fetch the
latest version of a tuple. Obviously that needs to be abstracted
away. To do so, move the logic that find the latest row version into
the AM. lock_tuple has a new flag argument,
TUPLE_LOCK_FLAG_FIND_LAST_VERSION, that forces it to lock the last
version, rather than the current one. It'd have been possible to do
so via a separate callback as well, but finding the last version
usually also necessitates locking the newest version, making it
sensible to combine the two. This replaces the previous use of
EvalPlanQualFetch(). Additionally HeapTupleUpdated, which previously
signaled either a concurrent update or delete, is now split into two,
to avoid callers needing AM specific knowledge to differentiate.
The move of finding the latest row version into tuple_lock means that
encountering a row concurrently moved into another partition will now
raise an error about "tuple to be locked" rather than "tuple to be
updated/deleted" - which is accurate, as that always happens when
locking rows. While possible slightly less helpful for users, it seems
like an acceptable trade-off.
As part of this commit HTSU_Result has been renamed to TM_Result, and
its members been expanded to differentiated between updating and
deleting. HeapUpdateFailureData has been renamed to TM_FailureData.
The interface to speculative insertion is changed so nodeModifyTable.c
does not have to set the speculative token itself anymore. Instead
there's a version of tuple_insert, tuple_insert_speculative, that
performs the speculative insertion (without requiring a flag to signal
that fact), and the speculative insertion is either made permanent
with table_complete_speculative(succeeded = true) or aborted with
succeeded = false).
Note that multi_insert is not yet routed through tableam, nor is
COPY. Changing multi_insert requires changes to copy.c that are large
enough to better be done separately.
Similarly, although simpler, CREATE TABLE AS and CREATE MATERIALIZED
VIEW are also only going to be adjusted in a later commit.
Author: Andres Freund and Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20190313003903.nwvrxi7rw3ywhdel@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
Many places need both, so this allows a few functions to take one
fewer parameter. More importantly, as soon as we add a VACUUM
option that takes a non-Boolean parameter, we need to replace
'int options' with a struct, and it seems better to think
of adding more fields to VacuumParams rather than passing around
both VacuumParams and a separate struct as well.
Patch by me, reviewed by Masahiko Sawada
Discussion: http://postgr.es/m/CA+Tgmob6g6-s50fyv8E8he7APfwCYYJ4z0wbZC2yZeSz=26CYQ@mail.gmail.com
Too allow table accesses to be not directly dependent on heap, several
new abstractions are needed. Specifically:
1) Heap scans need to be generalized into table scans. Do this by
introducing TableScanDesc, which will be the "base class" for
individual AMs. This contains the AM independent fields from
HeapScanDesc.
The previous heap_{beginscan,rescan,endscan} et al. have been
replaced with a table_ version.
There's no direct replacement for heap_getnext(), as that returned
a HeapTuple, which is undesirable for a other AMs. Instead there's
table_scan_getnextslot(). But note that heap_getnext() lives on,
it's still used widely to access catalog tables.
This is achieved by new scan_begin, scan_end, scan_rescan,
scan_getnextslot callbacks.
2) The portion of parallel scans that's shared between backends need
to be able to do so without the user doing per-AM work. To achieve
that new parallelscan_{estimate, initialize, reinitialize}
callbacks are introduced, which operate on a new
ParallelTableScanDesc, which again can be subclassed by AMs.
As it is likely that several AMs are going to be block oriented,
block oriented callbacks that can be shared between such AMs are
provided and used by heap. table_block_parallelscan_{estimate,
intiialize, reinitialize} as callbacks, and
table_block_parallelscan_{nextpage, init} for use in AMs. These
operate on a ParallelBlockTableScanDesc.
3) Index scans need to be able to access tables to return a tuple, and
there needs to be state across individual accesses to the heap to
store state like buffers. That's now handled by introducing a
sort-of-scan IndexFetchTable, which again is intended to be
subclassed by individual AMs (for heap IndexFetchHeap).
The relevant callbacks for an AM are index_fetch_{end, begin,
reset} to create the necessary state, and index_fetch_tuple to
retrieve an indexed tuple. Note that index_fetch_tuple
implementations need to be smarter than just blindly fetching the
tuples for AMs that have optimizations similar to heap's HOT - the
currently alive tuple in the update chain needs to be fetched if
appropriate.
Similar to table_scan_getnextslot(), it's undesirable to continue
to return HeapTuples. Thus index_fetch_heap (might want to rename
that later) now accepts a slot as an argument. Core code doesn't
have a lot of call sites performing index scans without going
through the systable_* API (in contrast to loads of heap_getnext
calls and working directly with HeapTuples).
Index scans now store the result of a search in
IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the
target is not generally a HeapTuple anymore that seems cleaner.
To be able to sensible adapt code to use the above, two further
callbacks have been introduced:
a) slot_callbacks returns a TupleTableSlotOps* suitable for creating
slots capable of holding a tuple of the AMs
type. table_slot_callbacks() and table_slot_create() are based
upon that, but have additional logic to deal with views, foreign
tables, etc.
While this change could have been done separately, nearly all the
call sites that needed to be adapted for the rest of this commit
also would have been needed to be adapted for
table_slot_callbacks(), making separation not worthwhile.
b) tuple_satisfies_snapshot checks whether the tuple in a slot is
currently visible according to a snapshot. That's required as a few
places now don't have a buffer + HeapTuple around, but a
slot (which in heap's case internally has that information).
Additionally a few infrastructure changes were needed:
I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now
internally uses a slot to keep track of tuples. While
systable_getnext() still returns HeapTuples, and will so for the
foreseeable future, the index API (see 1) above) now only deals with
slots.
The remainder, and largest part, of this commit is then adjusting all
scans in postgres to use the new APIs.
Author: Andres Freund, Haribabu Kommi, Alvaro Herrera
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
This fixes two sets of issues related to the use of transient files in
the backend:
1) OpenTransientFile() has been used in some code paths with read-write
flags while read-only is sufficient, so switch those calls to be
read-only where necessary. These have been reported by Joe Conway.
2) When opening transient files, it is up to the caller to close the
file descriptors opened. In error code paths, CloseTransientFile() gets
called to clean up things before issuing an error. However in normal
exit paths, a lot of callers of CloseTransientFile() never actually
reported errors, which could leave a file descriptor open without
knowing about it. This is an issue I complained about a couple of
times, but never had the courage to write and submit a patch, so here we
go.
Note that one frontend code path is impacted by this commit so as an
error is issued when fetching control file data, making backend and
frontend to be treated consistently.
Reported-by: Joe Conway, Michael Paquier
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Georgios Kokolatos, Joe Conway
Discussion: https://postgr.es/m/20190301023338.GD1348@paquier.xyz
Discussion: https://postgr.es/m/c49b69ec-e2f7-ff33-4f17-0eaa4f2cef27@joeconway.com
This introduces the concept of table access methods, i.e. CREATE
ACCESS METHOD ... TYPE TABLE and
CREATE TABLE ... USING (storage-engine).
No table access functionality is delegated to table AMs as of this
commit, that'll be done in following commits.
Subsequent commits will incrementally abstract table access
functionality to be routed through table access methods. That change
is too large to be reviewed & committed at once, so it'll be done
incrementally.
Docs will be updated at the end, as adding them incrementally would
likely make them less coherent, and definitely is a lot more work,
without a lot of benefit.
Table access methods are specified similar to index access methods,
i.e. pg_am.amhandler returns, as INTERNAL, a pointer to a struct with
callbacks. In contrast to index AMs that struct needs to live as long
as a backend, typically that's achieved by just returning a pointer to
a constant struct.
Psql's \d+ now displays a table's access method. That can be disabled
with HIDE_TABLEAM=true, which is mainly useful so regression tests can
be run against different AMs. It's quite possible that this behaviour
still needs to be fine tuned.
For now it's not allowed to set a table AM for a partitioned table, as
we've not resolved how partitions would inherit that. Disallowing
allows us to introduce, if we decide that's the way forward, such a
behaviour without a compatibility break.
Catversion bumped, to add the heap table AM and references to it.
Author: Haribabu Kommi, Andres Freund, Alvaro Herrera, Dimitri Golgov and others
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsqlhttps://postgr.es/m/20190107235616.6lur25ph22u5u5av@alap3.anarazel.dehttps://postgr.es/m/20190304234700.w5tmhducs5wxgzls@alap3.anarazel.de
After commit b0eaa4c51b, we use a local map of pages to find the required
space for small relations. We do clear this map when we have found a block
with enough free space, when we extend the relation, or on transaction
abort so that it can be used next time. However, we miss to clear it when
we didn't find any pages to try from the map which leads to an assertion
failure when we later tried to use it after relation extension.
In the passing, I have improved some comments in this area.
Reported-by: Tom Lane based on buildfarm results
Author: Amit Kapila
Reviewed-by: John Naylor
Tested-by: Kuntal Ghosh
Discussion: https://postgr.es/m/32368.1551114120@sss.pgh.pa.us
Test for the compiler builtins __builtin_clz, __builtin_ctz, and
__builtin_popcount, and make use of these in preference to
handwritten C code if they're available. Create src/port
infrastructure for "leftmost one", "rightmost one", and "popcount"
so as to centralize these decisions.
On x86_64, __builtin_popcount generally won't make use of the POPCNT
opcode because that's not universally supported yet. Provide code
that checks CPUID and then calls POPCNT via asm() if available.
This requires indirecting through a function pointer, which is
an annoying amount of overhead for a one-instruction operation,
but it's probably not worth working harder than this for our
current use-cases.
I'm not sure we've found all the existing places that could profit
from this new infrastructure; but we at least touched all the
ones that used copied-and-pasted versions of the bitmapset.c code,
and got rid of multiple copies of the associated constant arrays.
While at it, replace c-compiler.m4's one-per-builtin-function
macros with a single one that can handle all the cases we need
to worry about so far. Also, because I'm paranoid, make those
checks into AC_LINK checks rather than just AC_COMPILE; the
former coding failed to verify that libgcc has support for the
builtin, in cases where it's not inline code.
David Rowley, Thomas Munro, Alvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/CAKJS1f9WTAGG1tPeJnD18hiQW5gAk59fQ6WK-vfdAKEHyRg2RA@mail.gmail.com
This reverts commits fc6c72747a, 109de05cbb, d0b4663c23 and
711bab1e4d.
Somebody will have to try harder before submitting this patch again.
I've spent entirely too much time on it already, and the #ifdef maze yet
to be written in order for it to build at all got on my nerves. The
amount of work needed to get a platform-specific performance improvement
that's barely above the noise level is not worth it.
These opcodes have been around in the AMD world since 2007, and 2008 in
the case of intel. They're supported in GCC and Clang via some __builtin
macros. The opcodes may be unavailable during runtime, in which case we
fall back on a C-based implementation of the code. In order to get the
POPCNT instruction we must pass the -mpopcnt option to the compiler. We
do this only for the pg_bitutils.c file.
David Rowley (with fragments taken from a patch by Thomas Munro)
Discussion: https://postgr.es/m/CAKJS1f9WTAGG1tPeJnD18hiQW5gAk59fQ6WK-vfdAKEHyRg2RA@mail.gmail.com
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
Previously we initialized pages when bulk extending in
RelationAddExtraBlocks(). That has a major disadvantage: It ties
RelationAddExtraBlocks() to heap, as other types of storage are likely
to need different amounts of special space, have different amount of
free space (previously determined by PageGetHeapFreeSpace()).
That we're relying on initializing pages, but not WAL logging the
initialization, also means the risk for getting
"WARNING: relation \"%s\" page %u is uninitialized --- fixing"
style warnings in vacuums after crashes/immediate shutdowns, is
considerably higher. The warning sounds much more serious than what
they are.
Fix those two issues together by not initializing pages in
RelationAddExtraPages() (but continue to do so in
RelationGetBufferForTuple(), which is linked much more closely to
heap), and accepting uninitialized pages as normal in
vacuumlazy.c. When vacuumlazy encounters an empty page it now adds it
to the FSM, but does nothing else. We chose to not issue a debug
message, much less a warning in that case - it seems rarely useful,
and quite likely to scare people unnecessarily.
For now empty pages aren't added to the VM, because standbys would not
re-discover such pages after a promotion. In contrast to other sources
for empty pages, there's no corresponding WAL records triggering FSM
updates during replay.
Previously when extending the relation, there was a moment between
extending the relation, and acquiring an exclusive lock on the new
page, in which another backend could lock the page. To avoid new
content being put on that new page, vacuumlazy needed to acquire the
extension lock for a brief moment when encountering a new page. A
second corner case, only working somewhat by accident, was that
RelationGetBufferForTuple() sometimes checks the last page in a
relation for free space, without consulting the FSM; that only worked
because PageGetHeapFreeSpace() interprets the zero page header in a
new page as no free space. The lack of handling this properly
required reverting the previous attempt in 684200543b.
This issue can be solved by using RBM_ZERO_AND_LOCK when extending the
relation, thereby avoiding this window. There's some added complexity
when RelationGetBufferForTuple() is called with another buffer (for
updates), to avoid deadlocks, but that's rarely hit at runtime.
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20181219083945.6khtgm36mivonhva@alap3.anarazel.de
To avoid deadlock, backend acquires a lock on heap pages in block
number order. In certain cases, lock on heap pages is dropped and
reacquired. In this case, the locks are dropped for reading in
corresponding VM page/s. The issue is we re-acquire locks in bufferId
order whereas the intention was to acquire in blockid order.
This commit ensures that we will always acquire locks on heap pages in
blockid order.
Reported-by: Nishant Fnu
Author: Nishant Fnu
Reviewed-by: Amit Kapila and Robert Haas
Backpatch-through: 9.4
Discussion: https://postgr.es/m/5883C831-2ED1-47C8-BFAC-2D5BAE5A8CAE@amazon.com
When logging the replica identity of a deleted tuple, XLOG_HEAP_DELETE
records include references of the old tuple. Its data is stored in an
intermediate variable used to register this information for the WAL
record, but this variable gets away from the stack when the record gets
actually inserted.
Spotted by clang's AddressSanitizer.
Author: Stas Kelvish
Discussion: https://postgr.es/m/085C8825-AD86-4E93-AF80-E26CDF03D1EA@postgrespro.ru
Backpatch-through: 9.4
This reverts commit fc02e6724f and
e6799d5a53.
Parts of the buildfarm error out with
ERROR: page %u of relation "%s" should be empty but is not
errors, and so far I/we do not know why. fc02e672 didn't fix the
issue. As I cannot reproduce the issue locally, it seems best to get
the buildfarm green again, and reproduce the issue without time
pressure.
In e6799d5a53 I removed vacuumlazy.c trickery around re-checking
whether a page is actually empty after acquiring an extension lock on
the relation, because the page is not PageInit()ed anymore, and
entries in the FSM ought not to lead to user-visible errors.
As reported by various buildfarm animals that is not correct, given
the way to code currently stands: If vacuum processes a page that's
just been newly added by either RelationGetBufferForTuple() or
RelationAddExtraBlocks(), it could add that page to the FSM and it
could be reused by other backends, before those two functions check
whether the newly added page is actually new. That's a relatively
narrow race, but several buildfarm machines appear to be able to hit
it.
While it seems wrong that the FSM, given it's lack of durability and
approximative nature, can trigger errors like this, that seems better
fixed in a separate commit. Especially given that a good portion of
the buildfarm is red, and this is just re-introducing logic that
existed a few hours ago.
Author: Andres Freund
Discussion: https://postgr.es/m/20190128222259.zhi7ovzgtkft6em6@alap3.anarazel.de
Previously we initialized pages when bulk extending in
RelationAddExtraBlocks(). That has a major disadvantage: It ties
RelationAddExtraBlocks() to heap, as other types of storage are likely
to need different amounts of special space, have different amount of
free space (previously determined by PageGetHeapFreeSpace()).
That we're relying on initializing pages, but not WAL logging the
initialization, also means the risk for getting
"WARNING: relation \"%s\" page %u is uninitialized --- fixing"
style warnings in vacuums after crashes/immediate shutdowns, is
considerably higher. The warning sounds much more serious than what
they are.
Fix those two issues together by not initializing pages in
RelationAddExtraPages() (but continue to do so in
RelationGetBufferForTuple(), which is linked much more closely to
heap), and accepting uninitialized pages as normal in
vacuumlazy.c. When vacuumlazy encounters an empty page it now adds it
to the FSM, but does nothing else. We chose to not issue a debug
message, much less a warning in that case - it seems rarely useful,
and quite likely to scare people unnecessarily.
For now empty pages aren't added to the VM, because standbys would not
re-discover such pages after a promotion. In contrast to other sources
for empty pages, there's no corresponding WAL records triggering FSM
updates during replay.
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20181219083945.6khtgm36mivonhva@alap3.anarazel.de
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor with design inputs and some code contribution by Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
Given these routines are heap specific, and that there will be more
generic visibility support in via table AM, it makes sense to move the
prototypes to heapam.h (routines like HeapTupleSatisfiesVacuum will
not be exposed in a generic fashion, because they are too storage
specific).
Similarly, the code in tqual.c is specific to heap, so moving it into
access/heap/ makes sense.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
access/heapam contains functions that are very storage specific (say
heap_insert() and a lot of lower level functions), and fairly generic
infrastructure like relation_open(), heap_open() etc. In the upcoming
pluggable storage work we're introducing a layer between table
accesses in general and heapam, to allow for different storage
methods. For a bit cleaner separation it thus seems advantageous to
move generic functions like the aforementioned to their own headers.
access/relation.h will contain relation_open() etc, and access/table.h
will contain table_open() (formerly known as heap_open()). I've decided
for table.h not to include relation.h, but we might change that at a
later stage.
relation.h already exists in another directory, but the other
plausible name (rel.h) also conflicts. It'd be nice if there were a
non-conflicting name, but nobody came up with a suggestion. It's
possible that the appropriate way to address the naming conflict would
be to rename nodes/relation.h, which isn't particularly well named.
To avoid breaking a lot of extensions that just use heap_open() etc,
table.h has macros mapping the old names to the new ones, and heapam.h
includes relation, table.h. That also allows to keep the
bulk renaming of existing callers in a separate commit.
Author: Andres Freund
Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de
This is architecturally mildly problematic, which becomes more
pronounced with the upcoming introduction of pluggable storage.
To fix, teach heap_parallelscan_estimate() to deal with SnapshotAny
snapshots, and then use it from _bt_parallel_estimate_shared().
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This reverts commit c203d6cf8 and some follow-on fixes, completing the
task begun in commit 5d28c9bd7. If that feature is ever resurrected,
the code will look quite a bit different from this, so it seems best
to start from a clean slate.
The v11 branch is not touched; in that branch, the recheck_on_update
storage option remains present, but nonfunctional and undocumented.
Discussion: https://postgr.es/m/20190114223409.3tcvejfhlvbucrv5@alap3.anarazel.de
This is the genam.h equivalent of 4c850ecec6 (which removed
heapam.h from a lot of other headers). There's still a few header
includes of genam.h, but not from central headers anymore.
As a few headers are not indirectly included anymore, execnodes.h and
relscan.h need a few additional includes. Some of the depended on
types were replacable by using the underlying structs, but e.g. for
Snapshot in execnodes.h that'd have gotten more invasive than
reasonable in this commit.
Like the aforementioned commit 4c850ecec6, this requires adding new
genam.h includes to a number of backend files, which likely is also
required in a few external projects.
Author: Andres Freund
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
In toast_fetch_datum_slice(), we Assert() that what is passed in isn't
compressed, but we then later had a check to see what the length of if
what was passed in is compressed. That later check is rather confusing
since toast_fetch_datum_slice() is only ever called with non-compressed
datums and the Assert() earlier makes it clear that one shouldn't be
passing in compressed datums.
Add a comment to make it clear that toast_fetch_datum_slice() is just
for non-compressed datums, and remove the dead code.
During table rewrites (VACUUM FULL and CLUSTER), the main heap is logged
using XLOG / FPI records, and thus (correctly) ignored in decoding.
But the associated TOAST table is WAL-logged as plain INSERT records,
and so was logically decoded and passed to reorder buffer.
That has severe consequences with TOAST tables of non-trivial size.
Firstly, reorder buffer has to keep all those changes, possibly spilling
them to a file, incurring I/O costs and disk space.
Secondly, ReoderBufferCommit() was stashing all those TOAST chunks into
a hash table, which got discarded only after processing the row from the
main heap. But as the main heap is not decoded for rewrites, this never
happened, so all the TOAST data accumulated in memory, resulting either
in excessive memory consumption or OOM.
The fix is simple, as commit e9edc1ba already introduced infrastructure
(namely HEAP_INSERT_NO_LOGICAL flag) to skip logical decoding of TOAST
tables, but it only applied it to system tables. So simply use it for
all TOAST data in raw_heap_insert().
That would however solve only the memory consumption issue - the TOAST
changes would still be decoded and added to the reorder buffer, and
spilled to disk (although without TOAST tuple data, so much smaller).
But we can solve that by tweaking DecodeInsert() to just ignore such
INSERT records altogether, using XLH_INSERT_CONTAINS_NEW_TUPLE flag,
instead of skipping them later in ReorderBufferCommit().
Review: Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/flat/1a17c643-e9af-3dba-486b-fbe31bc1823a%402ndquadrant.com
Backpatch: 9.4-, where logical decoding was introduced
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
Upcoming work intends to allow pluggable ways to introduce new ways of
storing table data. Accessing those table access methods from the
executor requires TupleTableSlots to be carry tuples in the native
format of such storage methods; otherwise there'll be a significant
conversion overhead.
Different access methods will require different data to store tuples
efficiently (just like virtual, minimal, heap already require fields
in TupleTableSlot). To allow that without requiring additional pointer
indirections, we want to have different structs (embedding
TupleTableSlot) for different types of slots. Thus different types of
slots are needed, which requires adapting creators of slots.
The slot that most efficiently can represent a type of tuple in an
executor node will often depend on the type of slot a child node
uses. Therefore we need to track the type of slot is returned by
nodes, so parent slots can create slots based on that.
Relatedly, JIT compilation of tuple deforming needs to know which type
of slot a certain expression refers to, so it can create an
appropriate deforming function for the type of tuple in the slot.
But not all nodes will only return one type of slot, e.g. an append
node will potentially return different types of slots for each of its
subplans.
Therefore add function that allows to query the type of a node's
result slot, and whether it'll always be the same type (whether it's
fixed). This can be queried using ExecGetResultSlotOps().
The scan, result, inner, outer type of slots are automatically
inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(),
left/right subtrees respectively. If that's not correct for a node,
that can be overwritten using new fields in PlanState.
This commit does not introduce the actually abstracted implementation
of different kind of TupleTableSlots, that will be left for a followup
commit. The different types of slots introduced will, for now, still
use the same backing implementation.
While this already partially invalidates the big comment in
tuptable.h, it seems to make more sense to update it later, when the
different TupleTableSlot implementations actually exist.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Repeatedly rewriting a mapped catalog table with VACUUM FULL or
CLUSTER could cause logical decoding to fail with:
ERROR, "could not map filenode \"%s\" to relation OID"
To trigger the problem the rewritten catalog had to have live tuples
with toasted columns.
The problem was triggered as during catalog table rewrites the
heap_insert() check that prevents logical decoding information to be
emitted for system catalogs, failed to treat the new heap's toast table
as a system catalog (because the new heap is not recognized as a
catalog table via RelationIsLogicallyLogged()). The relmapper, in
contrast to the normal catalog contents, does not contain historical
information. After a single rewrite of a mapped table the new relation
is known to the relmapper, but if the table is rewritten twice before
logical decoding occurs, the relfilenode cannot be mapped to a
relation anymore. Which then leads us to error out. This only
happens for toast tables, because the main table contents aren't
re-inserted with heap_insert().
The fix is simple, add a new heap_insert() flag that prevents logical
decoding information from being emitted, and accept during decoding
that there might not be tuple data for toast tables.
Unfortunately that does not fix pre-existing logical decoding
errors. Doing so would require not throwing an error when a filenode
cannot be mapped to a relation during decoding, and that seems too
likely to hide bugs. If it's crucial to fix decoding for an existing
slot, temporarily changing the ERROR in ReorderBufferCommit() to a
WARNING appears to be the best fix.
Author: Andres Freund
Discussion: https://postgr.es/m/20180914021046.oi7dm4ra3ot2g2kt@alap3.anarazel.de
Backpatch: 9.4-, where logical decoding was introduced
Commit 9a3cebeaa changed things so that parallel workers didn't obtain
any lock of their own on tables they access. That was clearly a bad
idea, but I'd mistakenly supposed that it was the intended end result
of the series of patches for simplifying the executor's lock management.
Undo that change in relation_open(), and adjust ExecOpenScanRelation()
so that it gets the correct lock if inside a parallel worker.
In passing, clean up some more obsolete comments about when locks
are acquired.
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Instead of locking tables during executor startup, just Assert that
suitable locks were obtained already during the parse/plan pipeline
(or re-obtained by the plan cache). This must be so, else we have a
hazard that concurrent DDL has invalidated the plan.
This is pretty inefficient as well as undercommented, but it's all going
to go away shortly, so I didn't try hard. This commit is just another
attempt to use the buildfarm to see if we've missed anything in the plan
to simplify the executor's table management.
Note that the change needed here in relation_open() exposes that
parallel workers now really are accessing tables without holding any
lock of their own, whereas they were not doing that before this commit.
This does not give me a warm fuzzy feeling about that aspect of parallel
query; it does not seem like a good design, and we now know that it's
had exactly no actual testing. I think that we should modify parallel
query so that that change can be reverted.
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Opening a relation with no lock at all is unsafe; there's no guarantee
that we'll see a consistent state of the relevant catalog entries.
While use of MVCC scans to read the catalogs partially addresses that
complaint, it's still possible to switch to a new catalog snapshot
partway through loading the relcache entry. Moreover, whether or not
you trust the reasoning behind sometimes using less than
AccessExclusiveLock for ALTER TABLE, that reasoning is certainly not
valid if concurrent users of the table don't hold a lock corresponding
to the operation they want to perform.
Hence, add some assertion-build-only checks that require any caller
of relation_open(x, NoLock) to hold at least AccessShareLock. This
isn't a full solution, since we can't verify that the lock level is
semantically appropriate for the action --- but it's definitely of
some use, because it's already caught two bugs.
We can also assert that callers of addRangeTableEntryForRelation()
hold at least the lock level specified for the new RTE.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/16565.1538327894@sss.pgh.pa.us
Upcoming changes introduce further types of tuple table slots, in
preparation of making table storage pluggable. New storage methods
will have different representation of tuples, therefore the slot
accessor should refer explicitly to heap tuples.
Instead of just renaming the functions, split it into one function
that accepts heap tuples not residing in buffers, and one accepting
ones in buffers. Previously one function was used for both, but that
was a bit awkward already, and splitting will allow us to represent
slot types for tuples in buffers and normal memory separately.
This is split out from the patch introducing abstract slots, as this
largely consists out of mechanical changes.
Author: Ashutosh Bapat
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
We aren't very strict about keeping FSM up to date on WAL replay,
because per-page freespace values aren't critical in replicas (can't
write to heap in a replica; and if the replica is promoted, the values
would be updated by VACUUM anyway). However, VACUUM since 9.6 can skip
processing pages marked all-visible or all-frozen, and if such pages are
recorded in FSM with wrong values, those values are blindly propagated
to FSM's upper layers by VACUUM's FreeSpaceMapVacuum. (This rationale
assumes that crashes are not very frequent, because those would cause
outdated FSM to occur in the primary.)
Even when the FSM is outdated in standby, things are not too bad
normally, because, most per-page FSM values will be zero (other than
those propagated with the base-backup that created the standby); only
once the remaining free space is less than 0.2*BLCKSZ the per-page value
is maintained by WAL replay of heap ins/upd/del. However, if
wal_log_hints=on causes complete FSM pages to be propagated to a standby
via full-page images, many too-optimistic per-page values can end up
being registered in the standby.
Incorrect per-page values aren't critical in most cases, since an
inserter that is given a page that doesn't actually contain the claimed
free space will update FSM with the correct value, and retry until it
finds a usable page. However, if there are many such updates to do, an
inserter can spend a long time doing them before a usable page is found;
in a heavily trafficked insert-only table with many concurrent inserters
this has been observed to cause several second stalls, causing visible
application malfunction.
To fix this problem, it seems sufficient to have heap_xlog_visible
(replay of setting all-visible and all-frozen VM bits for a heap page)
update the FSM value for the page being processed. This fixes the
per-page counters together with making the page skippable to vacuum, so
when vacuum does FreeSpaceMapVacuum, the values propagated to FSM upper
layers are the correct ones, avoiding the problem.
While at it, apply the same fix to heap_xlog_clean (replay of tuple
removal by HOT pruning and vacuum). This makes any space freed by the
cleaning available earlier than the next vacuum in the promoted replica.
Backpatch to 9.6, where this problem was diagnosed on an insert-only
table with all-frozen pages, which were introduced as a concept in that
release. Theoretically it could apply with all-visible pages to older
branches, but there's been no report of that and it doesn't backpatch
cleanly anyway.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20180802172857.5skoexsilnjvgruk@alvherre.pgsql
6cb3372 enforces errno to ENOSPC when less bytes than what is expected
have been written when it is unset, though it forgot to properly reset
errno before doing a system call to write(), causing errno to
potentially come from a previous system call.
Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/31797.1533326676@sss.pgh.pa.us
When reading an existing FSM or VM page that was found to be corrupt by the
buffer manager, the code applied PageInit() to reinitialize the page, but
did so without any locking. There is thus a hazard that two backends might
concurrently do PageInit, which in itself would still be OK, but the slower
one might then zero over subsequent data changes applied by the faster one.
Even that is unlikely to be fatal; but it's not desirable, so add locking
to prevent it.
This does not add any locking overhead in the normal code path where the
page is OK. It's not immediately obvious that that's safe, but I believe
it is, for reasons explained in the added comments.
Problem noted by R P Asim. It's been like this for a long time, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CANXE4Te4G0TGq6cr0-TvwP0H4BNiK_-hB5gHe8mF+nz0mcYfMQ@mail.gmail.com
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
Dan Wood diagnosed a long-standing problem that pages containing tuples
that are locked by multixacts containing live lockers may spuriously end
up as candidates for getting their all-visible flag set. This has the
long-term effect that multixacts remain unfrozen; this may previously
pass undetected, but since commit XYZ it would be reported as
"ERROR: found multixact 134100944 from before relminmxid 192042633"
because when a later vacuum tries to freeze the page it detects that a
multixact that should have gotten frozen, wasn't.
Dan proposed a (correct) patch that simply sets a variable to its
correct value, after a bogus initialization. But, per discussion, it
seems better coding to avoid the bogus initializations altogether, since
they could give rise to more bugs later. Therefore this fix rewrites
the logic a little bit to avoid depending on the bogus initializations.
This bug was part of a family introduced in 9.6 by commit a892234f830e;
later, commit 38e9f90a22 fixed most of them, but this one was
unnoticed.
Authors: Dan Wood, Pavan Deolasee, Álvaro Herrera
Reviewed-by: Masahiko Sawada, Pavan Deolasee, Álvaro Herrera
Discussion: https://postgr.es/m/84EBAC55-F06D-4FBE-A3F3-8BDA093CE3E3@amazon.com
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
When selecting a new OID, we take care to avoid picking one that's already
in use in the target table, so as not to create duplicates after the OID
counter has wrapped around. However, up to now we used SnapshotDirty when
scanning for pre-existing entries. That ignores committed-dead rows, so
that we could select an OID matching a deleted-but-not-yet-vacuumed row.
While that mostly worked, it has two problems:
* If recently deleted, the dead row might still be visible to MVCC
snapshots, creating a risk for duplicate OIDs when examining the catalogs
within our own transaction. Such duplication couldn't be visible outside
the object-creating transaction, though, and we've heard few if any field
reports corresponding to such a symptom.
* When selecting a TOAST OID, deleted toast rows definitely *are* visible
to SnapshotToast, and will remain so until vacuumed away. This leads to
a conflict that will manifest in errors like "unexpected chunk number 0
(expected 1) for toast value nnnnn". We've been seeing reports of such
errors from the field for years, but the cause was unclear before.
The fix is simple: just use SnapshotAny to search for conflicting rows.
This results in a slightly longer window before object OIDs can be
recycled, but that seems unlikely to create any large problems.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
When an update moves a row between partitions (supported since
2f17844104), our normal logic for following update chains in READ
COMMITTED mode doesn't work anymore. Cross partition updates are
modeled as an delete from the old and insert into the new
partition. No ctid chain exists across partitions, and there's no
convenient space to introduce that link.
Not throwing an error in a partitioned context when one would have
been thrown without partitioning is obviously problematic. This commit
introduces infrastructure to detect when a tuple has been moved, not
just plainly deleted. That allows to throw an error when encountering
a deletion that's actually a move, while attempting to following a
ctid chain.
The row deleted as part of a cross partition update is marked by
pointing it's t_ctid to an invalid block, instead of self as a normal
update would. That was deemed to be the least invasive and most
future proof way to represent the knowledge, given how few infomask
bits are there to be recycled (there's also some locking issues with
using infomask bits).
External code following ctid chains should be updated to check for
moved tuples. The most likely consequence of not doing so is a missed
error.
Author: Amul Sul, editorialized by me
Reviewed-By: Amit Kapila, Pavan Deolasee, Andres Freund, Robert Haas
Discussion: http://postgr.es/m/CAAJ_b95PkwojoYfz0bzXU8OokcTVGzN6vYGCNVUukeUDrnF3dw@mail.gmail.com
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
FreeSpaceMapVacuumRange has the same effect, is more efficient if many
pages are involved, and makes fewer assumptions about how it's used.
Notably, Claudio Freire pointed out that UpdateFreeSpaceMap could fail
if the specified freespace value isn't the maximum possible. This isn't
a problem for the single existing user, but the function represents an
attractive nuisance IMO, because it's named as though it were a
general-purpose update function and its limitations are undocumented.
In any case we don't need multiple ways to get the same result.
In passing, do some code review and cleanup in RelationAddExtraBlocks.
In particular, I see no excuse for it to omit the PageIsNew safety check
that's done in the mainline extension path in RelationGetBufferForTuple.
Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com
If the value of an index expression is unchanged after UPDATE,
allow HOT updates where previously we disallowed them, giving
a significant performance boost in those cases.
Particularly useful for indexes such as JSON->>field where the
JSON value changes but the indexed value does not.
Submitted as "surjective indexes" patch, now enabled by use
of new "recheck_on_update" parameter.
Author: Konstantin Knizhnik
Reviewer: Simon Riggs, with much wordsmithing and some cleanup
Sloppy coding in this function could lead to leaking a VM buffer pin,
or to attempting to free the same pin twice. Repair. While at it,
reduce the code's tendency to free and reacquire the same page pin.
Back-patch to 9.6; before that, this routine did not concern itself
with VM pages.
Amit Kapila and Tom Lane
Discussion: https://postgr.es/m/CAA4eK1KJKwhc=isgTQHjM76CAdVswzNeAuZkh_cx-6QgGkSEgA@mail.gmail.com
Commit 4800f16a7a added some sanity checks to ensure we don't
accidentally corrupt data, but in one of them we failed to consider the
effects of a database upgraded from 9.2 or earlier, where a tuple
exclusively locked prior to the upgrade has a slightly different bit
pattern. Fix that by using the macro that we fixed in commit
74ebba84ae for similar situations.
Reported-by: Alexandre Garcia
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAPYLKR6yxV4=pfW0Gwij7aPNiiPx+3ib4USVYnbuQdUtmkMaEA@mail.gmail.com
Andres suspects that this bug may have wider ranging consequences, but I
couldn't find anything.
Use IndexTupleSize everywhere, instead. Also, remove IndexTupleSize's
internal typecast, as that's not really needed and might mask coding
errors. Change some pointer variable datatypes in the call sites
to compensate for that and make it clearer what we're assuming.
Ildar Musin, Robert Haas, Stephen Frost
Discussion: https://postgr.es/m/0274288e-9e88-13b6-c61c-7b36928bf221@postgrespro.ru
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
The previous commit has shown that the sanity checks around freezing
aren't strong enough. Strengthening them seems especially important
because the existance of the bug has caused corruption that we don't
want to make even worse during future vacuum cycles.
The errors are emitted with ereport rather than elog, despite being
"should never happen" messages, so a proper error code is emitted. To
avoid superflous translations, mark messages as internal.
Author: Andres Freund and Alvaro Herrera
Reviewed-By: Alvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20171102112019.33wb7g5wp4zpjelu@alap3.anarazel.de
Backpatch: 9.3-
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
It turns out we misdiagnosed what the real problem was. Revert the
previous changes, because they may have worse consequences going
forward. A better fix is forthcoming.
The simplistic test case is kept, though disabled.
Discussion: https://postgr.es/m/20171102112019.33wb7g5wp4zpjelu@alap3.anarazel.de
When some tuple versions in an update chain are frozen due to them being
older than freeze_min_age, the xmax/xmin trail can become broken. This
breaks HOT (and probably other things). A subsequent VACUUM can break
things in more serious ways, such as leaving orphan heap-only tuples
whose root HOT redirect items were removed. This can be seen because
index creation (or REINDEX) complain like
ERROR: XX000: failed to find parent tuple for heap-only tuple at (0,7) in table "t"
Because of relfrozenxid contraints, we cannot avoid the freezing of the
early tuples, so we must cope with the results: whenever we see an Xmin
of FrozenTransactionId, consider it a match for whatever the previous
Xmax value was.
This problem seems to have appeared in 9.3 with multixact changes,
though strictly speaking it seems unrelated.
Since 9.4 we have commit 37484ad2a "Change the way we mark tuples as
frozen", so the fix is simple: just compare the raw Xmin (still stored
in the tuple header, since freezing merely set an infomask bit) to the
Xmax. But in 9.3 we rewrite the Xmin value to FrozenTransactionId, so
the original value is lost and we have nothing to compare the Xmax with.
To cope with that case we need to compare the Xmin with FrozenXid,
assume it's a match, and hope for the best. Sadly, since you can
pg_upgrade a 9.3 instance containing half-frozen pages to newer
releases, we need to keep the old check in newer versions too, which
seems a bit brittle; I hope we can somehow get rid of that.
I didn't optimize the new function for performance. The new coding is
probably a bit slower than before, since there is a function call rather
than a straight comparison, but I'd rather have it work correctly than
be fast but wrong.
This is a followup after 20b6552242 fixed a few related problems.
Apparently, in 9.6 and up there are more ways to get into trouble, but
in 9.3 - 9.5 I cannot reproduce a problem anymore with this patch, so
there must be a separate bug.
Reported-by: Peter Geoghegan
Diagnosed-by: Peter Geoghegan, Michael Paquier, Daniel Wood,
Yi Wen Wong, Álvaro
Discussion: https://postgr.es/m/CAH2-Wznm4rCrhFAiwKPWTpEw2bXDtgROZK7jWWGucXeH3D1fmA@mail.gmail.com
Haribabu Kommi, reviewed by Dilip Kumar and Rafia Sabih. Various
cosmetic changes by me to explain why this appears to be safe but
allowing inserts in parallel mode in general wouldn't be. Also, I
removed the REFRESH MATERIALIZED VIEW case from Haribabu's patch,
since I'm not convinced that case is OK, and hacked on the
documentation somewhat.
Discussion: http://postgr.es/m/CAJrrPGdo5bak6qnPWe8Kpi8g_jfQEs-G4SYmG9y+OFaw2-dPvA@mail.gmail.com
Vacuum calls page-level HOT prune to remove dead HOT tuples before doing
liveness checks (HeapTupleSatisfiesVacuum) on the remaining tuples. But
concurrent transaction commit/abort may turn DEAD some of the HOT tuples
that survived the prune, before HeapTupleSatisfiesVacuum tests them.
This happens to activate the code that decides to freeze the tuple ...
which resuscitates it, duplicating data.
(This is especially bad if there's any unique constraints, because those
are now internally violated due to the duplicate entries, though you
won't know until you try to REINDEX or dump/restore the table.)
One possible fix would be to simply skip doing anything to the tuple,
and hope that the next HOT prune would remove it. But there is a
problem: if the tuple is older than freeze horizon, this would leave an
unfrozen XID behind, and if no HOT prune happens to clean it up before
the containing pg_clog segment is truncated away, it'd later cause an
error when the XID is looked up.
Fix the problem by having the tuple freezing routines cope with the
situation: don't freeze the tuple (and keep it dead). In the cases that
the XID is older than the freeze age, set the HEAP_XMAX_COMMITTED flag
so that there is no need to look up the XID in pg_clog later on.
An isolation test is included, authored by Michael Paquier, loosely
based on Daniel Wood's original reproducer. It only tests one
particular scenario, though, not all the possible ways for this problem
to surface; it be good to have a more reliable way to test this more
fully, but it'd require more work.
In message https://postgr.es/m/20170911140103.5akxptyrwgpc25bw@alvherre.pgsql
I outlined another test case (more closely matching Dan Wood's) that
exposed a few more ways for the problem to occur.
Backpatch all the way back to 9.3, where this problem was introduced by
multixact juggling. In branches 9.3 and 9.4, this includes a backpatch
of commit e5ff9fefcd50 (of 9.5 era), since the original is not
correctable without matching the coding pattern in 9.5 up.
Reported-by: Daniel Wood
Diagnosed-by: Daniel Wood
Reviewed-by: Yi Wen Wong, Michaël Paquier
Discussion: https://postgr.es/m/E5711E62-8FDF-4DCA-A888-C200BF6B5742@amazon.com
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
In commit fccebe421, we hacked get_actual_variable_range() to scan the
index with SnapshotDirty, so that if there are many uncommitted tuples
at the end of the index range, it wouldn't laboriously scan through all
of them looking for a live value to return. However, that didn't fix it
for the case of many recently-dead tuples at the end of the index;
SnapshotDirty recognizes those as committed dead and so we're back to
the same problem.
To improve the situation, invent a "SnapshotNonVacuumable" snapshot type
and use that instead. The reason this helps is that, if the snapshot
rejects a given index entry, we know that the indexscan will mark that
index entry as killed. This means the next get_actual_variable_range()
scan will proceed past that entry without visiting the heap, making the
scan a lot faster. We may end up accepting a recently-dead tuple as
being the estimated extremal value, but that doesn't seem much worse than
the compromise we made before to accept not-yet-committed extremal values.
The cost of the scan is still proportional to the number of dead index
entries at the end of the range, so in the interval after a mass delete
but before VACUUM's cleaned up the mess, it's still possible for
get_actual_variable_range() to take a noticeable amount of time, if you've
got enough such dead entries. But the constant factor is much much better
than before, since all we need to do with each index entry is test its
"killed" bit.
We chose to back-patch commit fccebe421 at the time, but I'm hesitant to
do so here, because this form of the problem seems to affect many fewer
people. Also, even when it happens, it's less bad than the case fixed
by commit fccebe421 because we don't get the contention effects from
expensive TransactionIdIsInProgress tests.
Dmitriy Sarafannikov, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/05C72CF7-B5F6-4DB9-8A09-5AC897653113@yandex.ru
Previously, the parallel executor logic did reinitialization of shared
state within the ExecReScan code for parallel-aware scan nodes. This is
problematic, because it means that the ExecReScan call has to occur
synchronously (ie, during the parent Gather node's ReScan call). That is
swimming very much against the tide so far as the ExecReScan machinery is
concerned; the fact that it works at all today depends on a lot of fragile
assumptions, such as that no plan node between Gather and a parallel-aware
scan node is parameterized. Another objection is that because ExecReScan
might be called in workers as well as the leader, hacky extra tests are
needed in some places to prevent unwanted shared-state resets.
Hence, let's separate this code into two functions, a ReInitializeDSM
call and the ReScan call proper. ReInitializeDSM is called only in
the leader and is guaranteed to run before we start new workers.
ReScan is returned to its traditional function of resetting only local
state, which means that ExecReScan's usual habits of delaying or
eliminating child rescan calls are safe again.
As with the preceding commit 7df2c1f8d, it doesn't seem to be necessary
to make these changes in 9.6, which is a good thing because the FDW and
CustomScan APIs are impacted.
Discussion: https://postgr.es/m/CAA4eK1JkByysFJNh9M349u_nNjqETuEnY_y1VUc_kJiU0bxtaQ@mail.gmail.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
As Andres pointed out, pg_atomic_init_u64 must be used to initialize an
atomic variable, before it can be accessed with the actual atomic ops.
Trying to use pg_atomic_write_u64 on an uninitialized variable leads to a
failure with the fallback implementation that uses a spinlock.
Discussion: https://www.postgresql.org/message-id/20170816191346.d3ke5tpshhco4bnd%40alap3.anarazel.de
If several sessions are concurrently locking a tuple update chain with
nonconflicting lock modes using an old snapshot, and they all succeed,
it may happen that some of them fail because of restarting the loop (due
to a concurrent Xmax change) and getting an error in the subsequent pass
while trying to obtain a tuple lock that they already have in some tuple
version.
This can only happen with very high concurrency (where a row is being
both updated and FK-checked by multiple transactions concurrently), but
it's been observed in the field and can have unpleasant consequences
such as an FK check failing to see a tuple that definitely exists:
ERROR: insert or update on table "child_table" violates foreign key constraint "fk_constraint_name"
DETAIL: Key (keyid)=(123456) is not present in table "parent_table".
(where the key is observably present in the table).
Discussion: https://postgr.es/m/20170714210011.r25mrff4nxjhmf3g@alvherre.pgsql
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The old coding was getting more complicated as new things were added,
and it would be barely tolerable with upcoming WARM updates and other
future features such as indirect indexes. The new coding incurs a small
performance cost in synthetic benchmark cases, and is barely measurable
in normal cases. A much larger benefit is expected from WARM, which
could actually bolt its needs on top of the existing coding, but it is
much uglier and bug-prone than doing it on this new code. Additional
optimization can be applied on top of this, if need be.
Reviewed-by: Pavan Deolasee, Amit Kapila, Mithun CY
Discussion: https://postgr.es/m/20161228232018.4hc66ndrzpz4g4wn@alvherre.pgsqlhttps://postgr.es/m/CABOikdMJfz69dBNRTOZcB6s5A0tf8OMCyQVYQyR-WFFdoEwKMQ@mail.gmail.com
In commit b8d7f053c, we needed to fix ExecEvalWholeRowVar to not change
the state of the slot it's copying. The initial quick hack at that
required two rounds of tuple construction, which is not very nice.
To fix, add another primitive to tuptoaster.c that does precisely what
we need. (I initially tried to do this by refactoring one of the
existing functions into two pieces; but it looked like that might hurt
performance for the existing case, and the amount of code that could
be shared is not very large, so I gave up on that.)
Discussion: https://postgr.es/m/26088.1490315792@sss.pgh.pa.us
A hot standby replica keeps a list of Access Exclusive locks for a top
level transaction. These locks are released when the top level transaction
ends. Searching of this list is O(N^2), and each transaction had to pay the
price of searching this list for locks, even if it didn't take any AE
locks itself.
This patch optimizes this case by having the master server track which
transactions took AE locks, and passes that along to the standby server in
the commit/abort record. This allows the standby to only try to release
locks for transactions which actually took any, avoiding the majority of
the performance issue.
Refactor MyXactAccessedTempRel into MyXactFlags to allow minimal additional
cruft with this.
Analysis and initial patch by David Rowley
Author: David Rowley and Simon Riggs
Previous commits, notably 53be0b1add and
6f3bd98ebf, made it possible to see from
pg_stat_activity when a backend was stuck waiting for another backend,
but it's also fairly common for a backend to be stuck waiting for an
I/O. Add wait events for those operations, too.
Rushabh Lathia, with further hacking by me. Reviewed and tested by
Michael Paquier, Amit Kapila, Rajkumar Raghuwanshi, and Rahila Syed.
Discussion: http://postgr.es/m/CAGPqQf0LsYHXREPAZqYGVkDqHSyjf=KsD=k0GTVPAuzyThh-VQ@mail.gmail.com
The index is scanned by a single process, but then all cooperating
processes can iterate jointly over the resulting set of heap blocks.
In the future, we might also want to support using a parallel bitmap
index scan to set up for a parallel bitmap heap scan, but that's a
job for another day.
Dilip Kumar, with some corrections and cosmetic changes by me. The
larger patch set of which this is a part has been reviewed and tested
by (at least) Andres Freund, Amit Khandekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, Thomas Munro, and me.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
Some background activity (like checkpoints, archive timeout, standby
snapshots) is not supposed to happen on an idle system. Unfortunately
so far it was not easy to determine when a system is idle, which
defeated some of the attempts to avoid redundant activity on an idle
system.
To make that easier, allow to make individual WAL insertions as not
being "important". By checking whether any important activity happened
since the last time an activity was performed, it now is easy to check
whether some action needs to be repeated.
Use the new facility for checkpoints, archive timeout and standby
snapshots.
The lack of a facility causes some issues in older releases, but in my
opinion the consequences (superflous checkpoints / archived segments)
aren't grave enough to warrant backpatching.
Author: Michael Paquier, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Amit Kapila, Kyotaro HORIGUCHI
Bug: #13685
Discussion:
https://www.postgresql.org/message-id/20151016203031.3019.72930@wrigleys.postgresql.orghttps://www.postgresql.org/message-id/CAB7nPqQcPqxEM3S735Bd2RzApNqSNJVietAC=6kfkYv_45dKwA@mail.gmail.com
Backpatch: -
When a relation is truncated, it is important that the FSM is truncated as
well. Otherwise, after recovery, the FSM can return a page that has been
truncated away, leading to errors like:
ERROR: could not read block 28991 in file "base/16390/572026": read only 0
of 8192 bytes
We were using MarkBufferDirtyHint() to dirty the buffer holding the last
remaining page of the FSM, but during recovery, that might in fact not
dirty the page, and the FSM update might be lost.
To fix, use the stronger MarkBufferDirty() function. MarkBufferDirty()
requires us to do WAL-logging ourselves, to protect from a torn page, if
checksumming is enabled.
Also fix an oversight in visibilitymap_truncate: it also needs to WAL-log
when checksumming is enabled.
Analysis by Pavan Deolasee.
Discussion: <CABOikdNr5vKucqyZH9s1Mh0XebLs_jRhKv6eJfNnD2wxTn=_9A@mail.gmail.com>
lockdefs.h was only split from lock.h relatively recently, and
represents a minimal subset of the old lock.h. heapam.h only needs
that smaller subset, so adjust it to include only that. This requires
some corresponding adjustments elsewhere.
Peter Geoghegan
When heap_lock_tuple decides to follow the update chain, it tried to
also lock any version of the tuple that was created by an update that
was subsequently rolled back. This is pointless, since for all intents
and purposes that tuple exists no more; and moreover it causes
misbehavior, as reported independently by Marko Tiikkaja and Marti
Raudsepp: some SELECT FOR UPDATE/SHARE queries may fail to return
the tuples, and assertion-enabled builds crash.
Fix by having heap_lock_updated_tuple test the xmin and return success
immediately if the tuple was created by an aborted transaction.
The condition where tuples become invisible occurs when an updated tuple
chain is followed by heap_lock_updated_tuple, which reports the problem
as HeapTupleSelfUpdated to its caller heap_lock_tuple, which in turn
propagates that code outwards possibly leading the calling code
(ExecLockRows) to believe that the tuple exists no longer.
Backpatch to 9.3. Only on 9.5 and newer this leads to a visible
failure, because of commit 27846f02c176; before that, heap_lock_tuple
skips the whole dance when the tuple is already locked by the same
transaction, because of the ancient HeapTupleSatisfiesUpdate behavior.
Still, the buggy condition may also exist in more convoluted scenarios
involving concurrent transactions, so it seems safer to fix the bug in
the old branches too.
Discussion:
https://www.postgresql.org/message-id/CABRT9RC81YUf1=jsmWopcKJEro=VoeG2ou6sPwyOUTx_qteRsg@mail.gmail.comhttps://www.postgresql.org/message-id/48d3eade-98d3-8b9a-477e-1a8dc32a724d@joh.to
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
When there is an identifiable REPLICA IDENTITY index on the target table,
heap_update leaks the id_attrs bitmapset. That's not many bytes, but it
adds up over enough rows, since the code typically runs in a query-lifespan
context. Bug introduced in commit e55704d8b, which did a rather poor job
of cloning the existing use-pattern for RelationGetIndexAttrBitmap().
Per bug #14293 from Zhou Digoal. Back-patch to 9.4 where the bug was
introduced.
Report: <20160824114320.15676.45171@wrigleys.postgresql.org>
INSERT .. ON CONFLICT runs a pre-check of the possible conflicting
constraints before performing the actual speculative insertion. In case
the inserted tuple included TOASTed columns the ON CONFLICT condition
would be handled correctly in case the conflict was caught by the
pre-check, but if two transactions entered the speculative insertion
phase at the same time, one would have to re-try, and the code for
aborting a speculative insertion did not handle deleting the
speculatively inserted TOAST datums correctly.
TOAST deletion would fail with "ERROR: attempted to delete invisible
tuple" as we attempted to remove the TOAST tuples using
simple_heap_delete which reasoned that the given tuples should not be
visible to the command that wrote them.
This commit updates the heap_abort_speculative() function which aborts
the conflicting tuple to use itself, via toast_delete, for deleting
associated TOAST datums. Like before, the inserted toast rows are not
marked as being speculative.
This commit also adds a isolationtester spec test, exercising the
relevant code path. Unfortunately 9.5 cannot handle two waiting
sessions, and thus cannot execute this test.
Reported-By: Viren Negi, Oskari Saarenmaa
Author: Oskari Saarenmaa, edited a bit by me
Bug: #14150
Discussion: <20160519123338.12513.20271@wrigleys.postgresql.org>
Backpatch: 9.5, where ON CONFLICT was introduced
tqual.h is included in some front-end compiles, and a static inline
breaks on buildfarm member castoroides. Since the macro is never
referenced, it should dodge that problem, although this doesn't
seem like the cleanest way of hiding things from front-end compiles.
Report and review by Tom Lane; patch by me.