The postmaster now checks every minute or so (worst case, at most two
minutes) that postmaster.pid is still there and still contains its own PID.
If not, it performs an immediate shutdown, as though it had received
SIGQUIT.
The original goal behind this change was to ensure that failed buildfarm
runs would get fully cleaned up, even if the test scripts had left a
postmaster running, which is not an infrequent occurrence. When the
buildfarm script removes a test postmaster's $PGDATA directory, its next
check on postmaster.pid will fail and cause it to exit. Previously, manual
intervention was often needed to get rid of such orphaned postmasters,
since they'd block new test postmasters from obtaining the expected socket
address.
However, by checking postmaster.pid and not something else, we can provide
additional robustness: manual removal of postmaster.pid is a frequent DBA
mistake, and now we can at least limit the damage that will ensue if a new
postmaster is started while the old one is still alive.
Back-patch to all supported branches, since we won't get the desired
improvement in buildfarm reliability otherwise.
Prior to commit 0709b7ee72, access to
variables within a spinlock-protected critical section had to be done
through a volatile pointer, but that should no longer be necessary.
This continues work begun in df4077cda2
and 6ba4ecbf47.
Thomas Munro and Michael Paquier
For time masks, like HH24, MI, SS, CC, MM, do not count the negative
sign as part of the zero-padding length specified by the mask, e.g. have
to_char('-4 years'::interval, 'YY') return '-04', not '-4'.
Report by Craig Ringer
Some of the buildfarm members are evidently miserly enough of stack space
to pass the originally-committed form of this test. Increase the
requirement 10X to hopefully ensure that it fails as-expected everywhere.
Security: CVE-2015-5289
This adds regressions tests which are specific to INSERT+RETURNING and
UPDATE+RETURNING to ensure that the SELECT policies are added as
WithCheckOptions (and should therefore throw an error when the policy is
violated).
Per suggestion from Andres.
Back-patch to 9.5 as the prior commit was.
The tsquery, ltxtquery and query_int data types have a common ancestor.
Having acquired check_stack_depth() calls independently, each was
missing at least one call. Back-patch to 9.0 (all supported versions).
A range type can name another range type as its subtype, and a record
type can bear a column of another record type. Consequently, functions
like range_cmp() and record_recv() are recursive. Functions at risk
include operator family members and referents of pg_type regproc
columns. Treat as recursive any such function that looks up and calls
the same-purpose function for a record column type or the range subtype.
Back-patch to 9.0 (all supported versions).
An array type's element type is never itself an array type, so array
functions are unaffected. Recursion depth proportional to array
dimensionality, found in array_dim_to_jsonb(), is fine thanks to MAXDIM.
Sufficiently-deep recursion heretofore elicited a SIGSEGV. If an
application constructs PostgreSQL json or jsonb values from arbitrary
user input, application users could have exploited this to terminate all
active database connections. That applies to 9.3, where the json parser
adopted recursive descent, and later versions. Only row_to_json() and
array_to_json() were at risk in 9.2, both in a non-security capacity.
Back-patch to 9.2, where the json type was introduced.
Oskari Saarenmaa, reviewed by Michael Paquier.
Security: CVE-2015-5289
Similar to 7d8db3e, given that INSERT+RETURNING requires SELECT rights
on the table, apply the SELECT policies as WCOs to the tuples being
inserted. Apply the same logic to UPDATE+RETURNING.
Back-patch to 9.5 where RLS was added.
The WithCheckOptions list in Query are only populated during rewrite and
do not need to be written out or read in as part of a Query structure.
Further, move WithCheckOptions to the bottom and add comments to clarify
that it is only populated during rewrite.
Back-patch to 9.5 with a catversion bump, as we are still in alpha.
In 020235a575 I lowered the autovacuum_*freeze_max_age minimums to
allow for easier testing of wraparounds. I did not touch the
corresponding per-table limits. While those don't matter for the purpose
of wraparound, it seems more consistent to lower them as well.
It's noteworthy that the previous reloption lower limit for
autovacuum_multixact_freeze_max_age was too high by one magnitude, even
before 020235a575.
Discussion: 26377.1443105453@sss.pgh.pa.us
Backpatch: back to 9.0 (in parts), like the prior patch
To allow users to force RLS to always be applied, even for table owners,
add ALTER TABLE .. FORCE ROW LEVEL SECURITY.
row_security=off overrides FORCE ROW LEVEL SECURITY, to ensure pg_dump
output is complete (by default).
Also add SECURITY_NOFORCE_RLS context to avoid data corruption when
ALTER TABLE .. FORCE ROW SECURITY is being used. The
SECURITY_NOFORCE_RLS security context is used only during referential
integrity checks and is only considered in check_enable_rls() after we
have already checked that the current user is the owner of the relation
(which should always be the case during referential integrity checks).
Back-patch to 9.5 where RLS was added.
Due to b67aaf21e8 / CREATE EXTENSION ... CASCADE the test output
contains the extension name in yet another place. Since that's variable
depending on the python version...
Add yet another name mangling stanza to regress-python3-mangle.mk.
Author: Petr Jelinek
On reflection, the submitted patch didn't really work to prevent the
request size from exceeding MaxAllocSize, because of the fact that we'd
happily round nbuckets up to the next power of 2 after we'd limited it to
max_pointers. The simplest way to enforce the limit correctly is to
round max_pointers down to a power of 2 when it isn't one already.
(Note that the constraint to INT_MAX / 2, if it were doing anything useful
at all, is properly applied after that.)
Limit the size of the hashtable pointer array to not more than
MaxAllocSize, per reports from Kouhei Kaigai and others of "invalid memory
alloc request size" failures. There was discussion of allowing the array
to get larger than that by using the "huge" palloc API, but so far no proof
that that is actually a good idea, and at this point in the 9.5 cycle major
changes from old behavior don't seem like the way to go.
Fix a rather serious secondary bug in the new code, which was that it
didn't ensure nbuckets remained a power of 2 when recomputing it for the
multiple-batch case.
Clean up sloppy division of labor between ExecHashIncreaseNumBuckets and
its sole call site.
Null path elements and, where the object is an array, invalid integer
elements now cause an error.
Incorrect behaviour noted by Thom Brown, patch from Dmitry Dolgov.
Backpatch to 9.5 where jsonb_set was introduced
Specifically, make its effect independent from the row_security GUC, and
make it affect permission checks pertinent to views the BYPASSRLS role
owns. The row_security GUC thereby ceases to change successful-query
behavior; it can only make a query fail with an error. Back-patch to
9.5, where BYPASSRLS was introduced.
Without CASCADE, if an extension has an unfullfilled dependency on
another extension, CREATE EXTENSION ERRORs out with "required extension
... is not installed". That is annoying, especially when that dependency
is an implementation detail of the extension, rather than something the
extension's user can make sense of.
In addition to CASCADE this also includes a small set of regression
tests around CREATE EXTENSION.
Author: Petr Jelinek, editorialized by Michael Paquier, Andres Freund
Reviewed-By: Michael Paquier, Andres Freund, Jeff Janes
Discussion: 557E0520.3040800@2ndquadrant.com
The existing hint talked about "may only contain letters", but the
actual requirement is more strict: only lower case letters are allowed.
Reported-By: Rushabh Lathia
Author: Rushabh Lathia
Discussion: AGPqQf2x50qcwbYOBKzb4x75sO_V3g81ZsA8+Ji9iN5t_khFhQ@mail.gmail.com
Backpatch: 9.4-, where replication slots were added
Four related issues:
1) attnos/varnos/resnos for EXCLUDED were out of sync when a column
after one dropped in the underlying relation was referenced.
2) References to whole-row variables (i.e. EXCLUDED.*) lead to errors.
3) It was possible to reference system columns in the EXCLUDED pseudo
relations, even though they would not have valid contents.
4) References to EXCLUDED were rewritten by the RLS machinery, as
EXCLUDED was treated as if it were the underlying relation.
To fix the first two issues, generate the excluded targetlist with
dropped columns in mind and add an entry for whole row
variables. Instead of unconditionally adding a wholerow entry we could
pull up the expression if needed, but doing it unconditionally seems
simpler. The wholerow entry is only really needed for ruleutils/EXPLAIN
support anyway.
The remaining two issues are addressed by changing the EXCLUDED RTE to
have relkind = composite. That fits with EXCLUDED not actually being a
real relation, and allows to treat it differently in the relevant
places. scanRTEForColumn now skips looking up system columns when the
RTE has a composite relkind; fireRIRrules() already had a corresponding
check, thereby preventing RLS expansion on EXCLUDED.
Also add tests for these issues, and improve a few comments around
excluded handling in setrefs.c.
Reported-By: Peter Geoghegan, Geoff Winkless
Author: Andres Freund, Amit Langote, Peter Geoghegan
Discussion: CAEzk6fdzJ3xYQZGbcuYM2rBd2BuDkUksmK=mY9UYYDugg_GgZg@mail.gmail.com,
CAM3SWZS+CauzbiCEcg-GdE6K6ycHE_Bz6Ksszy8AoixcMHOmsA@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
DST law changes in Cayman Islands, Fiji, Moldova, Morocco, Norfolk Island,
North Korea, Turkey, Uruguay. New zone America/Fort_Nelson for Canadian
Northern Rockies.
Some of the functions in regex compilation and execution recurse, and
therefore could in principle be driven to stack overflow. The Tcl crew
has seen this happen in practice in duptraverse(), though their fix was
to put in a hard-wired limit on the number of recursive levels, which is
not too appetizing --- fortunately, we have enough infrastructure to check
the actually available stack. Greg Stark has also seen it in other places
while fuzz testing on a machine with limited stack space. Let's put guards
in to prevent crashes in all these places.
Since the regex code would leak memory if we simply threw elog(ERROR),
we have to introduce an API that checks for stack depth without throwing
such an error. Fortunately that's not difficult.
In cfindloop(), if the initial call to shortest() reports that a
zero-length match is possible at the current search start point, but then
it is unable to construct any actual match to that, it'll just loop around
with the same start point, and thus make no progress. We need to force the
start point to be advanced. This is safe because the loop over "begin"
points has already tried and failed to match starting at "close", so there
is surely no need to try that again.
This bug was introduced in commit e2bd904955,
wherein we allowed continued searching after we'd run out of match
possibilities, but evidently failed to think hard enough about exactly
where we needed to search next.
Because of the way this code works, such a match failure is only possible
in the presence of backrefs --- otherwise, shortest()'s judgment that a
match is possible should always be correct. That probably explains how
come the bug has escaped detection for several years.
The actual fix is a one-liner, but I took the trouble to add/improve some
comments related to the loop logic.
After fixing that, the submitted test case "()*\1" didn't loop anymore.
But it reported failure, though it seems like it ought to match a
zero-length string; both Tcl and Perl think it does. That seems to be from
overenthusiastic optimization on my part when I rewrote the iteration match
logic in commit 173e29aa5deefd9e71c183583ba37805c8102a72: we can't just
"declare victory" for a zero-length match without bothering to set match
data for capturing parens inside the iterator node.
Per fuzz testing by Greg Stark. The first part of this is a bug in all
supported branches, and the second part is a bug since 9.2 where the
iteration rewrite happened.
Commit 9662143f0c added infrastructure to
allow regular-expression operations to be terminated early in the event
of SIGINT etc. However, fuzz testing by Greg Stark disclosed that there
are still cases where regex compilation could run for a long time without
noticing a cancel request. Specifically, the fixempties() phase never
adds new states, only new arcs, so it doesn't hit the cancel check I'd put
in newstate(). Add one to newarc() as well to cover that.
Some experimentation of my own found that regex execution could also run
for a long time despite a pending cancel. We'd put a high-level cancel
check into cdissect(), but there was none inside the core text-matching
routines longest() and shortest(). Ordinarily those inner loops are very
very fast ... but in the presence of lookahead constraints, not so much.
As a compromise, stick a cancel check into the stateset cache-miss
function, which is enough to guarantee a cancel check at least once per
lookahead constraint test.
Making this work required more attention to error handling throughout the
regex executor. Henry Spencer had apparently originally intended longest()
and shortest() to be incapable of incurring errors while running, so
neither they nor their subroutines had well-defined error reporting
behaviors. However, that was already broken by the lookahead constraint
feature, since lacon() can surely suffer an out-of-memory failure ---
which, in the code as it stood, might never be reported to the user at all,
but just silently be treated as a non-match of the lookahead constraint.
Normalize all that by inserting explicit error tests as needed. I took the
opportunity to add some more comments to the code, too.
Back-patch to all supported branches, like the previous patch.
The output of a typical pg_rewind run contained a mix of capitalized and
not-capitalized and punctuated and not-punctuated phrases for no
apparent reason. Make that consistent. Also fix some problems in other
messages.
This case seems to have been overlooked when unvalidated check constraints
were introduced, in 9.2. The code would attempt to dump such constraints
over again for each child table, even though adding them to the parent
table is sufficient.
In 9.2 and 9.3, also fix contrib/pg_upgrade/Makefile so that the "make
clean" target fully cleans up after a failed test. This evidently got
dealt with at some point in 9.4, but it wasn't back-patched. I ran into
it while testing this fix ...
Per bug #13656 from Ingmar Brouns.
Module initialization was still not completely correct after commit
6b61955135, per crash report from Takashi Ohnishi. To fix, instead of
trying to monkey around with the value of the GUC setting directly, add
a separate boolean flag that enables the feature on a standby, but only
for the startup (recovery) process, when it sees that its master server
has the feature enabled.
Discussion: http://www.postgresql.org/message-id/ca44c6c7f9314868bdc521aea4f77cbf@MP-MSGSS-MBX004.msg.nttdata.co.jp
Also change the deactivation routine to delete all segment files rather
than leaving the last one around. (This doesn't need separate
WAL-logging, because on recovery we execute the same deactivation
routine anyway.)
In passing, clean up the code structure somewhat, particularly so that
xlog.c doesn't know so much about when to activate/deactivate the
feature.
Thanks to Fujii Masao for testing and Petr Jelínek for off-list discussion.
Back-patch to 9.5, where commit_ts was introduced.
Previously "GRANT * ON * TO " was tab-completed to add an extra "TO",
rather than with a list of roles. This is the bug that commit 2f88807
introduced unexpectedly. This commit fixes that incorrect tab-completion.
Thomas Munro, reviewed by Jeff Janes.
If some existing listener is far behind, incoming new listener sessions
would start from that session's read pointer and then need to advance over
many already-committed notification messages, which they have no interest
in. This was expensive in itself and also thrashed the pg_notify SLRU
buffers a lot more than necessary. We can improve matters considerably
in typical scenarios, without much added cost, by starting from the
furthest-ahead read pointer, not the furthest-behind one. We do have to
consider only sessions in our own database when doing this, which requires
an extra field in the data structure, but that's a pretty small cost.
Back-patch to 9.0 where the current LISTEN/NOTIFY logic was introduced.
Matt Newell, slightly adjusted by me
A Gather executor node runs any number of copies of a plan in an equal
number of workers and merges all of the results into a single tuple
stream. It can also run the plan itself, if the workers are
unavailable or haven't started up yet. It is intended to work with
the Partial Seq Scan node which will be added in future commits.
It could also be used to implement parallel query of a different sort
by itself, without help from Partial Seq Scan, if the single_copy mode
is used. In that mode, a worker executes the plan, and the parallel
leader does not, merely collecting the worker's results. So, a Gather
node could be inserted into a plan to split the execution of that plan
across two processes. Nested Gather nodes aren't currently supported,
but we might want to add support for that in the future.
There's nothing in the planner to actually generate Gather nodes yet,
so it's not quite time to break out the champagne. But we're getting
close.
Amit Kapila. Some designs suggestions were provided by me, and I also
reviewed the patch. Single-copy mode, documentation, and other minor
changes also by me.
If a transaction or subtransaction creates a ParallelContext but ends
without calling InitializeParallelDSM, the previous code would
seg fault. Fix that.
When considering which policies should be included, rather than look at
individual bits of the query (eg: if a RETURNING clause exists, or if a
WHERE clause exists which is referencing the table, or if it's a
FOR SHARE/UPDATE query), consider any case where we've determined
the user needs SELECT rights on the relation while doing an UPDATE or
DELETE to be a case where we apply SELECT policies, and any case where
we've deteremind that the user needs UPDATE rights on the relation while
doing a SELECT to be a case where we apply UPDATE policies.
This simplifies the logic and addresses concerns that a user could use
UPDATE or DELETE with a WHERE clauses to determine if rows exist, or
they could use SELECT .. FOR UPDATE to lock rows which they are not
actually allowed to modify through UPDATE policies.
Use list_append_unique() to avoid adding the same quals multiple times,
as, on balance, the cost of checking when adding the quals will almost
always be cheaper than keeping them and doing busywork for each tuple
during execution.
Back-patch to 9.5 where RLS was added.
We seem to have lost a line somewhere along the way in the comment block
that discusses async.c's locks, because it suddenly refers to "both locks"
without previously having mentioned more than one. Add a sentence to make
that read more sanely. Also, refer to the "pos of the slowest backend"
not the "tail of the slowest backend", since we have no per-backend value
called "tail".
The tolerance (larger than actual tps number) increases as the number
of threads decreases. The bug has been there since the thread support
was introduced in 9.0. Because back patching introduces incompatible
behavior changes regarding the tps number, the fix is committed to
master and 9.5 stable branches only.
Problem spotted by me and fix proposed by Fabien COELHO. Note that his
original patch included more than fixes (a code re-factoring) which is
not related to the problem and I omitted the part.
There are three main changes here:
1. No longer cause a start failure in a standby if the feature is
disabled in postgresql.conf but enabled in the master. This reverts one
part of commit 4f3924d9cd43; what we keep is the ability of the standby
to activate/deactivate the module (which includes creating and removing
segments as appropriate) during replay of such actions in the master.
2. Replay WAL records affecting commitTS even if the feature is
disabled. This means the standby will always have the same state as the
master after replay.
3. Have COMMIT PREPARE record the transaction commit time as well. We
were previously only applying it in the normal transaction commit path.
Author: Petr Jelínek
Discussion: http://www.postgresql.org/message-id/CAHGQGwHereDzzzmfxEBYcVQu3oZv6vZcgu1TPeERWbDc+gQ06g@mail.gmail.com
Discussion: http://www.postgresql.org/message-id/CAHGQGwFuzfO4JscM9LCAmCDCxp_MfLvN4QdB+xWsS-FijbjTYQ@mail.gmail.com
Additionally, I cleaned up nearby code related to replication origins,
which I found a bit hard to follow, and fixed a couple of typos.
Backpatch to 9.5, where this code was introduced.
Per bug reports from Fujii Masao and subsequent discussion.
We were passing error message texts to croak() verbatim, which turns out
not to work if the text contains non-ASCII characters; Perl mangles their
encoding, as reported in bug #13638 from Michal Leinweber. To fix, convert
the text into a UTF8-encoded SV first.
It's hard to test this without risking failures in different database
encodings; but we can follow the lead of plpython, which is already
assuming that no-break space (U+00A0) has an equivalent in all encodings
we care about running the regression tests in (cf commit 2dfa15de5).
Back-patch to 9.1. The code is quite different in 9.0, and anyway it seems
too risky to put something like this into 9.0's final minor release.
Alex Hunsaker, with suggestions from Tim Bunce and Tom Lane
This code provides infrastructure for a parallel leader to start up
parallel workers to execute subtrees of the plan tree being executed
in the master. User-supplied parameters from ParamListInfo are passed
down, but PARAM_EXEC parameters are not. Various other constructs,
such as initplans, subplans, and CTEs, are also not currently shared.
Nevertheless, there's enough here to support a basic implementation of
parallel query, and we can lift some of the current restrictions as
needed.
Amit Kapila and Robert Haas
Thom Brown reported that SSL connections didn't seem to work on Windows in
9.5. Asif Naeem figured out that the cause was my_sock_read() looking at
"errno" when it needs to look at "SOCK_ERRNO". This mistake was introduced
in commit 680513ab79, which cloned the
backend's custom SSL BIO code into libpq, and didn't translate the errno
handling properly. Moreover, it introduced unnecessary errno save/restore
logic, which was particularly confusing because it was incomplete; and it
failed to check for all three of EINTR, EAGAIN, and EWOULDBLOCK in
my_sock_write. (That might not be necessary; but since we're copying
well-tested backend code that does do that, it seems prudent to copy it
faithfully.)
To make sure that pg_dump/pg_restore function properly with RLS
policies, arrange to have a few of them left around at the end of the
regression tests.
Back-patch to 9.5 where RLS was added.
When taking the UPDATE path in an INSERT .. ON CONFLICT .. UPDATE tables
with oids were not supported. The tuple generated by the update target
list was projected without space for an oid - a simple oversight.
Reported-By: Peter Geoghegan
Author: Andres Freund
Backpatch: 9.5, where ON CONFLICT was introduced
Otherwise, we effectively act as if abs_top_builddir were the root
directory, which is quite dangerous if the user happens to have
permissions to do things there. This can crop up in PGXS builds,
for example.
Report by Sandro Santilli, patch by me, review by Noah Misch.
In 9.5 and master there is no need to support legacy truncation. This is
just committed separately to make it easier to backpatch the WAL logged
multixact truncation to 9.3 and 9.4 if we later decide to do so.
I bumped master's magic from 0xD086 to 0xD088 and 9.5's from 0xD085 to
0xD087 to avoid 9.5 reusing a value that has been in use on master while
keeping the numbers increasing between major versions.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Backpatch: 9.5
The fact that multixact truncations are not WAL logged has caused a fair
share of problems. Amongst others it requires to do computations during
recovery while the database is not in a consistent state, delaying
truncations till checkpoints, and handling members being truncated, but
offset not.
We tried to put bandaids on lots of these issues over the last years,
but it seems time to change course. Thus this patch introduces WAL
logging for multixact truncations.
This allows:
1) to perform the truncation directly during VACUUM, instead of delaying it
to the checkpoint.
2) to avoid looking at the offsets SLRU for truncation during recovery,
we can just use the master's values.
3) simplify a fair amount of logic to keep in memory limits straight,
this has gotten much easier
During the course of fixing this a bunch of additional bugs had to be
fixed:
1) Data was not purged from memory the member's SLRU before deleting
segments. This happened to be hard or impossible to hit due to the
interlock between checkpoints and truncation.
2) find_multixact_start() relied on SimpleLruDoesPhysicalPageExist - but
that doesn't work for offsets that haven't yet been flushed to
disk. Add code to flush the SLRUs to fix. Not pretty, but it feels
slightly safer to only make decisions based on actual on-disk state.
3) find_multixact_start() could be called concurrently with a truncation
and thus fail. Via SetOffsetVacuumLimit() that could lead to a round
of emergency vacuuming. The problem remains in
pg_get_multixact_members(), but that's quite harmless.
For now this is going to only get applied to 9.5+, leaving the issues in
the older branches in place. It is quite possible that we need to
backpatch at a later point though.
For the case this gets backpatched we need to handle that an updated
standby may be replaying WAL from a not-yet upgraded primary. We have to
recognize that situation and use "old style" truncation (i.e. looking at
the SLRUs) during WAL replay. In contrast to before, this now happens in
the startup process, when replaying a checkpoint record, instead of the
checkpointer. Doing truncation in the restartpoint is incorrect, they
can happen much later than the original checkpoint, thereby leading to
wraparound. To avoid "multixact_redo: unknown op code 48" errors
standbys would have to be upgraded before primaries.
A later patch will bump the WAL page magic, and remove the legacy
truncation codepaths. Legacy truncation support is just included to make
a possible future backpatch easier.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Reviewed-By: Robert Haas, Alvaro Herrera, Thomas Munro
Backpatch: 9.5 for now
This replaces ill-fated commit 5ddc72887a,
which was reverted because it broke active uses of FK cache entries. In
this patch, we still do nothing more to invalidatable cache entries than
mark them as needing revalidation, so we won't break active uses. To keep
down the overhead of InvalidateConstraintCacheCallBack(), keep a list of
just the currently-valid cache entries. (The entries are large enough that
some added space for list links doesn't seem like a big problem.) This
would still be O(N^2) when there are many valid entries, though, so when
the list gets too long, just force the "sinval reset" behavior to remove
everything from the list. I set the threshold at 1000 entries, somewhat
arbitrarily. Possibly that could be fine-tuned later. Another item for
future study is whether it's worth adding reference counting so that we
could safely remove invalidated entries. As-is, problem cases are likely
to end up with large and mostly invalid FK caches.
Like the previous attempt, backpatch to 9.3.
Jan Wieck and Tom Lane
(Third time's the charm, I hope.)
Additional testing disclosed that this code could mangle already-localized
output from the "money" datatype. We can't very easily skip applying it
to "money" values, because the logic is tied to column right-justification
and people expect "money" output to be right-justified. Short of
decoupling that, we can fix it in what should be a safe enough way by
testing to make sure the string doesn't contain any characters that would
not be expected in plain numeric output.
On closer inspection, those seemingly redundant atoi() calls were not so
much inefficient as just plain wrong: the author of this code either had
not read, or had not understood, the POSIX specification for localeconv().
The grouping field is *not* a textual digit string but separate integers
encoded as chars.
We'll follow the existing code as well as the backend's cash.c in only
honoring the first group width, but let's at least honor it correctly.
This doesn't actually result in any behavioral change in any of the
locales I have installed on my Linux box, which may explain why nobody's
complained; grouping width 3 is close enough to universal that it's barely
worth considering other cases. Still, wrong is wrong, so back-patch.
This code did the wrong thing entirely for numbers with an exponent
but no decimal point (e.g., '1e6'), as reported by Jeff Janes in
bug #13636. More generally, it made lots of unverified assumptions
about what the input string could possibly look like. Rearrange so
that it only fools with leading digits that it's directly verified
are there, and an immediately adjacent decimal point. While at it,
get rid of some useless inefficiencies, like converting the grouping
count string to integer over and over (and over).
This has been broken for a long time, so back-patch to all supported
branches.
Previously, a function call appearing at the top level of WHERE had a
hard-wired selectivity estimate of 0.3333333, a kludge conveniently dated
in the source code itself to July 1992. The expectation at the time was
that somebody would soon implement estimator support functions analogous
to those for operators; but no such code has appeared, nor does it seem
likely to in the near future. We do have an alternative solution though,
at least for immutable functions on single relations: creating an
expression index on the function call will allow ANALYZE to gather stats
about the function's selectivity. But the code in clause_selectivity()
failed to make use of such data even if it exists.
Refactor so that that will happen. I chose to make it try this technique
for any clause type for which clause_selectivity() doesn't have a special
case, not just functions. To avoid adding unnecessary overhead in the
common case where we don't learn anything new, make selfuncs.c provide an
API that hooks directly to examine_variable() and then var_eq_const(),
rather than the previous coding which laboriously constructed an OpExpr
only so that it could be expensively deconstructed again.
I preserved the behavior that the default estimate for a function call
is 0.3333333. (For any other expression node type, it's 0.5, as before.)
I had originally thought to make the default be 0.5 across the board, but
changing a default estimate that's survived for twenty-three years seems
like something not to do without a lot more testing than I care to put
into it right now.
Per a complaint from Jehan-Guillaume de Rorthais. Back-patch into 9.5,
but not further, at least for the moment.
The comments here stated that this was just in case we ever had an
ALTER OPERATOR command that could remap an operator to a different
function. But those comments have been here for a long time, and no
such command has come about. In the absence of such a feature,
forcing the pg_proc OID to be looked up again each time we reread a
stored rule or similar is just a waste of cycles. Moreover, parallel
query needs a way to reread the exact same node tree that was written
out, not one that has been slightly stomped on. So just get rid of
this for now.
Per discussion with Tom Lane.
Previously pg_controldata didn't report newestCommitTs and this was
an oversight in commit 73c986a.
Also this patch changes pg_resetxlog so that it uses the same sentences
as pg_controldata does, regarding oldestCommitTs and newestCommitTs,
for the sake of consistency.
Back-patch to 9.5 where track_commit_timestamp was added.
Euler Taveira
The old minimum values are rather large, making it time consuming to
test related behaviour. Additionally the current limits, especially for
multixacts, can be problematic in space-constrained systems. 10000000
multixacts can contain a lot of members.
Since there's no good reason for the current limits, lower them a good
bit. Setting them to 0 would be a bad idea, triggering endless vacuums,
so still retain a limit.
While at it fix autovacuum_multixact_freeze_max_age to refer to
multixact.c instead of varsup.c.
Reviewed-By: Robert Haas
Discussion: CA+TgmoYmQPHcrc3GSs7vwvrbTkbcGD9Gik=OztbDGGrovkkEzQ@mail.gmail.com
Backpatch: back to 9.0 (in parts)
Previously, ANALYZE simply ignored columns of datatypes that have neither
a btree nor hash opclass (which means they have no recognized equality
operator). Without a notion of equality, we can't identify most-common
values nor estimate the number of distinct values. But we can still
count nulls and compute the average physical column width, and those
stats might be of value. Moreover there are some tools out there that
don't work so well if rows are missing from pg_statistic. So let's
add suitable logic for this case.
While this is arguably a bug fix, it also has the potential to change
query plans, and the gain seems not worth taking a risk of that in
stable branches. So back-patch into 9.5 but not further.
Oleksandr Shulgin, rewritten a bit by me.
For parallel query, we need to be able to pass a Plan to a worker, so
that it knows what it's supposed to do. We could invent our own way
of serializing plans for that purpose, but piggybacking on the
existing node infrastructure seems like a much better idea.
Initially, we'll probably only support a limited number of nodes
within parallel workers, but this commit adds support for everything
in plannodes.h except CustomScan, because doing it all at once seems
easier than doing it piecemeal, and it makes testing this code easier,
too. CustomScan is excluded because making that work requires a
larger rework of that facility.
Amit Kapila, reviewed and slightly revised by me.
It's declared as being an array of bool, but it's printed
differently from the way bool and arrays of bool are handled
elsewhere.
Patch by Amit Kapila. Anomaly noted independently by Amit Kapila
and KaiGai Kohei.
Commit e956808328 introduces adding pages
to FSM for ordinary insert, but autoanalyze was able just cleanup
pending list without adding to FSM.
Also fix double call of IndexFreeSpaceMapVacuum() during ginvacuumcleanup()
Report from Fujii Masao
Patch by me
Review by Jeff Janes
This logic was missing from ExplainPreScanNode, from which I derived
planstate_tree_walker. But it shouldn't be missing, especially not
from a generic walker function, so add it.
KaiGai Kohei
mul_var() postpones propagating carries until it risks overflow in its
internal digit array. However, the logic failed to account for the
possibility of overflow in the carry propagation step, allowing wrong
results to be generated in corner cases. We must slightly reduce the
when-to-propagate-carries threshold to avoid that.
Discovered and fixed by Dean Rasheed, with small adjustments by me.
This has been wrong since commit d72f6c7503,
so back-patch to all supported branches.
This commit's parent made superfluous the bit's sole usage. Referential
integrity checks have long run as the subject table's owner, and that
now implies RLS bypass. Safe use of the bit was tricky, requiring
strict control over the SQL expressions evaluating therein. Back-patch
to 9.5, where the bit was introduced.
Based on a patch by Stephen Frost.
Every query of a single ENABLE ROW SECURITY table has two meanings, with
the row_security GUC selecting between them. With row_security=force
available, every function author would have been advised to either set
the GUC locally or test both meanings. Non-compliance would have
threatened reliability and, for SECURITY DEFINER functions, security.
Authors already face an obligation to account for search_path, and we
should not mimic that example. With this change, only BYPASSRLS roles
need exercise the aforementioned care. Back-patch to 9.5, where the
row_security GUC was introduced.
Since this narrows the domain of pg_db_role_setting.setconfig and
pg_proc.proconfig, one might bump catversion. A row_security=force
setting in one of those columns will elicit a clear message, so don't.
RemoveLocalLock() must consider the possibility that LockAcquireExtended()
failed to palloc the initial space for a locallock's lockOwners array.
I had evidently meant to cope with this hazard when the code was originally
written (commit 1785acebf2), but missed that
the pfree needed to be protected with an if-test. Just to make sure things
are left in a clean state, reset numLockOwners as well.
Per low-memory testing by Andreas Seltenreich. Back-patch to all supported
branches.
BSD find is not very smart and ends up writing double slashes into the
output in those cases. Also, xgettext is not very smart and splits the
file names incorrectly in those cases, resulting in slightly incorrect
file names being written into the POT file.
The shm_mq mechanism was built to send error (and notice) messages and
tuples between backends. However, shm_mq itself only deals in raw
bytes. Since commit 2bd9e412f9, we have
had infrastructure for one message to redirect protocol messages to a
queue and for another backend to parse them and do useful things with
them. This commit introduces a somewhat analogous facility for tuples
by adding a new type of DestReceiver, DestTupleQueue, which writes
each tuple generated by a query into a shm_mq, and a new
TupleQueueFunnel facility which reads raw tuples out of the queue and
reconstructs the HeapTuple format expected by the executor.
The TupleQueueFunnel abstraction supports reading from multiple tuple
streams at the same time, but only in round-robin fashion. Someone
could imaginably want other policies, but this should be good enough
to meet our short-term needs related to parallel query, and we can
always extend it later.
This also makes one minor addition to the shm_mq API that didn'
seem worth breaking out as a separate patch.
Extracted from Amit Kapila's parallel sequential scan patch. This
code was originally written by me, and then it was revised by Amit,
and then it was revised some more by me.
These functions have been looking up type info for every row they
process. Instead of doing that we only look them up the first time
through and stash the information in the aggregate state object.
Affects json_agg, json_object_agg, jsonb_agg and jsonb_object_agg.
There is plenty more work to do in making these more efficient,
especially the jsonb functions, but this is a virtually cost free
improvement that can be done right away.
Backpatch to 9.5 where the jsonb variants were introduced.
After an internal failure in shortest() or longest() while pinning down the
exact location of a match, find() forgot to free the DFA structure before
returning. This is pretty unlikely to occur, since we just successfully
ran the "search" variant of the DFA; but it could happen, and it would
result in a session-lifespan memory leak since this code uses malloc()
directly. Problem seems to have been aboriginal in Spencer's library,
so back-patch all the way.
In passing, correct a thinko in a comment I added awhile back about the
meaning of the "ntree" field.
I happened across these issues while comparing our code to Tcl's version
of the library.
Use IsBinaryCoercible() method instead of custom
is_expected_type/is_text_type functions which was introduced when tsearch2
was moved into core.
Per report by David E. Wheeler
Analysis by Tom Lane
Patch by me
This setting contains extra configuration for the temp instance, as used
in pg_regress' --temp-config flag.
Backpatch to 9.2 where test.sh was introduced.
ExplainPreScanNode knows how to iterate over a generic tree of plan
states; factor that logic out into a separate walker function so that
other code, such as upcoming patches for parallel query, can also use
it.
Patch by me, reviewed by Tom Lane.
Commit 013ebc0a7b introduces microvacuum for
GiST, deletetion of tuple marked LP_DEAD uses IndexPageMultiDelete while
recovery code uses IndexPageTupleDelete in loop. This causes a difference
in offset numbers of tuples to delete. Patch introduces usage of
IndexPageMultiDelete in GiST except gistplacetopage() where only one tuple is
deleted at once. That also slightly improve performance, because
IndexPageMultiDelete is more effective.
Patch changes WAL format, so bump wal page magic.
Bug report from Jeff Janes
Diagnostic and patch by Anastasia Lubennikova and me
Commit 924bcf4f16 introduced a framework
for parallel computation in PostgreSQL that makes most but not all
built-in functions safe to execute in parallel mode. In order to have
parallel query, we'll need to be able to determine whether that query
contains functions (either built-in or user-defined) that cannot be
safely executed in parallel mode. This requires those functions to be
labeled, so this patch introduces an infrastructure for that. Some
functions currently labeled as safe may need to be revised depending on
how pending issues related to heavyweight locking under paralllelism
are resolved.
Parallel plans can't be used except for the case where the query will
run to completion. If portal execution were suspended, the parallel
mode restrictions would need to remain in effect during that time, but
that might make other queries fail. Therefore, this patch introduces
a framework that enables consideration of parallel plans only when it
is known that the plan will be run to completion. This probably needs
some refinement; for example, at bind time, we do not know whether a
query run via the extended protocol will be execution to completion or
run with a limited fetch count. Having the client indicate its
intentions at bind time would constitute a wire protocol break. Some
contexts in which parallel mode would be safe are not adjusted by this
patch; the default is not to try parallel plans except from call sites
that have been updated to say that such plans are OK.
This commit doesn't introduce any parallel paths or plans; it just
provides a way to determine whether they could potentially be used.
I'm committing it on the theory that the remaining parallel sequential
scan patches will also get committed to this release, hopefully in the
not-too-distant future.
Robert Haas and Amit Kapila. Reviewed (in earlier versions) by Noah
Misch.
Sync our regex code with upstream changes since last time we did this,
which was Tcl 8.5.11 (see commit 08fd6ff37f).
The only functional change here is to disbelieve that an octal escape is
three digits long if it would exceed \377. That's a bug fix, but it's
a minor one and could change the interpretation of working regexes, so
don't back-patch.
In addition to that, s/INFINITY/DUPINF/ to eliminate the risk of collisions
with <math.h>'s macro, and s/LOCAL/NOPROP/ because that also seems like
an unnecessarily collision-prone macro name.
There were some other cosmetic changes in their copy that I did not adopt,
notably a rather half-hearted attempt at renaming some of the C functions
in a more verbose style. (I'm not necessarily against the concept, but
renaming just a few functions in the package is not an improvement.)
This patch adds an option to replace the "time since pgbench run
started" with a Unix epoch timestamp in the progress report so that,
for instance, it is easier to compare timelines with pgsql log
Fabien COELHO <coelho@cri.ensmp.fr>
For the UPDATE/DELETE RETURNING case, filter the records which are not
visible to the user through ALL or SELECT policies from those considered
for the UPDATE or DELETE. This is similar to how the GRANT system
works, which prevents RETURNING unless the caller has SELECT rights on
the relation.
Per discussion with Robert, Dean, Tom, and Kevin.
Back-patch to 9.5 where RLS was introduced.
This refactors rewrite/rowsecurity.c to simplify the handling of the
default deny case (reducing the number of places where we check for and
add the default deny policy from three to one) by splitting up the
retrival of the policies from the application of them.
This also allowed us to do away with the policy_id field. A policy_name
field was added for WithCheckOption policies and is used in error
reporting, when available.
Patch by Dean Rasheed, with various mostly cosmetic changes by me.
Back-patch to 9.5 where RLS was introduced to avoid unnecessary
differences, since we're still in alpha, per discussion with Robert.
Commit 5ddc72887a does not actually work
because it will happily blow away ri_constraint_cache entries that are
in active use in outer call levels. In any case, it's a very ugly,
brute-force solution to the problem of limiting the cache size.
Revert until it can be redesigned.
This patch changes the log message which is logged when the server
successfully renames backup_label file to *.old but fails to rename
tablespace_map file during the shutdown. Previously the WARNING
message "online backup mode was not canceled" was logged in that case.
However this message is confusing because the backup mode is treated
as canceled whenever backup_label is successfully renamed. So this
commit makes the server log the message "online backup mode canceled"
in that case.
Also this commit changes errdetail messages so that they follow the
error message style guide.
Back-patch to 9.5 where tablespace_map file is introduced.
Original patch by Amit Kapila, heavily modified by me.
Patch provides command line option --strict-names which requires that at
least one table/schema should present for each -t/-n option.
Pavel Stehule <pavel.stehule@gmail.com>
To prevent perverse results, we now only return the other operand if
it's not scalar, and if both operands are of the same kind (array or
object).
Original bug complaint and patch from Oskari Saarenmaa, extended by me
to cover the cases of different kinds of jsonb.
Backpatch to 9.5 where jsonb_concat was introduced.
Modify pg_dump to restore postgres/template1 databases to non-default
tablespaces by switching out of the database to be moved, then switching
back.
Also, to fix potentially cases where the old/new tablespaces might not
match, fix pg_upgrade to process new/old tablespaces separately in all
cases.
Report by Marti Raudsepp
Patch by Marti Raudsepp, me
Backpatch through 9.0
I think this particular branch is actually dead, but the analysis to
prove that is not trivial, so instead take the weasel way.
Reported by Jinyu Zhang
Backpatch to 9.5, where BRIN was introduced.
Commit 45ba424f improved foreign key lookups during bulk updates
when the FK value does not change. When restoring a schema dump
from a database with many (say 100,000) foreign keys, this cache
would grow very big and every ALTER TABLE command was causing an
InvalidateConstraintCacheCallBack(), which uses a sequential hash
table scan. This could cause a severe performance regression in
restoring a schema dump (including during pg_upgrade).
The patch uses a heuristic method of detecting when the hash table
should be destroyed and recreated.
InvalidateConstraintCacheCallBack() adds the current size of the
hash table to a counter. When that sum reaches 1,000,000, the hash
table is flushed. This fixes the regression without noticeable
harm to the bulk update use case.
Jan Wieck
Backpatch to 9.3 where the performance regression was introduced.
Naming the individual lwlocks seems like something that may be useful
for other types of debugging, monitoring, or instrumentation output,
but this commit just implements it for the specific case of
trace_lwlocks.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi
The "typo" alleged in commit 1e460d4bd was actually a comment that was
correct when written, but I missed updating it in commit b5282aa89.
Use a slightly less specific (and hopefully more future-proof) description
of what is collected. Back-patch to 9.2 where that commit appeared, and
revert the comment to its then-entirely-correct state before that.
The list-wrangling here was done wrong, allowing the same state to get
put into the list twice. The following loop then would clone it twice.
The second clone would wind up with no inarcs, so that there was no
observable misbehavior AFAICT, but a useless state in the finished NFA
isn't an especially good thing.
Mark index tuple as dead if it's pointed by kill_prior_tuple during
ordinary (search) scan and remove it during insert process if there is no
enough space for new tuple to insert. This improves select performance
because index will not return tuple marked as dead and improves insert
performance because it reduces number of page split.
Anastasia Lubennikova <a.lubennikova@postgrespro.ru> with
minor editorialization by me
This commit makes postmaster forcibly remove the files signaling
a standby promotion request. Otherwise, the existence of those files
can trigger a promotion too early, whether a user wants that or not.
This removal of files is usually unnecessary because they can exist
only during a few moments during a standby promotion. However
there is a race condition: if pg_ctl promote is executed and creates
the files during a promotion, the files can stay around even after
the server is brought up to new master. Then, if new standby starts
by using the backup taken from that master, the files can exist
at the server startup and should be removed in order to avoid
an unexpected promotion.
Back-patch to 9.1 where promote signal file was introduced.
Problem reported by Feike Steenbergen.
Original patch by Michael Paquier, modified by me.
Discussion: 20150528100705.4686.91426@wrigleys.postgresql.org
Even views considered "simple" enough to be automatically updatable may
have mulitple relations involved (eg: in a where clause). We need to
make sure and lock those relations when rewriting the query.
Back-patch to 9.3 where updatable views were added.
Pointed out by Andres, patch thanks to Dean Rasheed.
This was forgotten in 8a3631f (commit that originally added the parameter)
and 0ca9907 (commit that added the documentation later that year).
Back-patch to all supported versions.
Per discussion, nowadays it is possible to have tablespaces that have
wildly different I/O characteristics from others. Setting different
effective_io_concurrency parameters for those has been measured to
improve performance.
Author: Julien Rouhaud
Reviewed by: Andres Freund
If a transaction never reaches the standby, later tests find unexpected
cluster state. A "tail-copy: query result matches" test failure has
been the usual symptom. Among the buildfarm members having run this
test suite, most have exhibited that symptom at least once. Back-patch
to 9.5, where pg_rewind was introduced.
Michael Paquier, reported by Christoph Berg.
Commit f828654e introduced the 'n' option, but it invoked
gettimeofday() independently of the 'm' option. If both options were
in use (or multiple 'n' options), or if 'n' was in use along with
csvlog, then the reported times could be different for the same log
message.
To fix, initialize a global variable with gettimeofday() once per log
message, and use that for both formats.
Don't bother coordinating the time for the 't' option, which has much
lower resolution.
Per complaint by Alvaro Herrera.
Cleanup process could be called by ordinary insert/update and could take a lot
of time. Add vacuum_delay_point() to make this process interruptable. Under
vacuum this call will also throttle a vacuum process to decrease system load,
called from insert/update it will not throttle, and that reduces a latency.
Backpatch for all supported branches.
Jeff Janes <jeff.janes@gmail.com>
Add pages deleted from GIN's pending list during cleanup to free space map
immediately. Clean up process could be initiated by ordinary insert but adding
page to FSM might occur only at vacuum. On some workload like never-vacuumed
insert-only tables it could cause a huge bloat.
Jeff Janes <jeff.janes@gmail.com>
Since 6fcd885 it is possible to immediately reserve WAL when creating a
slot via pg_create_physical_replication_slot(). Extend the replication
protocol to allow that as well.
Although, in contrast to the SQL interface, it is possible to update the
reserved location via the replication interface, it is still useful
being able to reserve upon creation there. Otherwise the logic in
ReplicationSlotReserveWal() has to be repeated in slot employing
clients.
Author: Michael Paquier
Discussion: CAB7nPqT0Wc1W5mdYGeJ_wbutbwNN+3qgrFR64avXaQCiJMGaYA@mail.gmail.com
RESERV. RESERV is meant for tokens like "now" and having them in that
category throws errors like these when used as an input date:
stark=# SELECT 'doy'::timestamptz;
ERROR: unexpected dtype 33 while parsing timestamptz "doy"
LINE 1: SELECT 'doy'::timestamptz;
^
stark=# SELECT 'dow'::timestamptz;
ERROR: unexpected dtype 32 while parsing timestamptz "dow"
LINE 1: SELECT 'dow'::timestamptz;
^
Found by LLVM's Libfuzzer
This has been broken since 9.3 (commit 82b1b213ca to be exact),
which suggests that nobody is any longer using a Windows build system that
doesn't provide a symlink emulation. Still, it's wrong on its own terms,
so repair.
YUriy Zhuravlev
Remove the code in plpgsql that suppressed the innermost line of CONTEXT
for messages emitted by RAISE commands. That was never more than a quick
backwards-compatibility hack, and it's pretty silly in cases where the
RAISE is nested in several levels of function. What's more, it violated
our design theory that verbosity of error reports should be controlled
on the client side not the server side.
To alleviate the resulting noise increase, introduce a feature in libpq
and psql whereby the CONTEXT field of messages can be suppressed, either
always or only for non-error messages. Printing CONTEXT for errors only
is now their default behavior.
The actual code changes here are pretty small, but the effects on the
regression test outputs are widespread. I had to edit some of the
alternative expected outputs by hand; hopefully the buildfarm will soon
find anything I fat-fingered.
In passing, fix up (again) the output line counts in psql's various
help displays. Add some commentary about how to verify them.
Pavel Stehule, reviewed by Petr Jelínek, Jeevan Chalke, and others
If the number of heap blocks is not multiples of pages per range, the
summarizing produces wrong summary information for the last brin index
tuple while vacuuming.
Problem reported by Tatsuo Ishii and fixed by Amit Langote.
Discussion at "[HACKERS] BRIN INDEX value (message id :20150903.174935.1946402199422994347.t-ishii@sraoss.co.jp)
Backpatched to 9.5 in which brin index was added.
Formerly, we treated only portals created in the current subtransaction as
having failed during subtransaction abort. However, if the error occurred
while running a portal created in an outer subtransaction (ie, a cursor
declared before the last savepoint), that has to be considered broken too.
To allow reliable detection of which ones those are, add a bookkeeping
field to struct Portal that tracks the innermost subtransaction in which
each portal has actually been executed. (Without this, we'd end up
failing portals containing functions that had called the subtransaction,
thereby breaking plpgsql exception blocks completely.)
In addition, when we fail an outer-subtransaction Portal, transfer its
resources into the subtransaction's resource owner, so that they're
released early in cleanup of the subxact. This fixes a problem reported by
Jim Nasby in which a function executed in an outer-subtransaction cursor
could cause an Assert failure or crash by referencing a relation created
within the inner subtransaction.
The proximate cause of the Assert failure is that AtEOSubXact_RelationCache
assumed it could blow away a relcache entry without first checking that the
entry had zero refcount. That was a bad idea on its own terms, so add such
a check there, and to the similar coding in AtEOXact_RelationCache. This
provides an independent safety measure in case there are still ways to
provoke the situation despite the Portal-level changes.
This has been broken since subtransactions were invented, so back-patch
to all supported branches.
Tom Lane and Michael Paquier
Post-commit review by Andres Freund discovered a couple of concurrency
bugs in the original patch: specifically, if the leader cleared a
follower's XID before it reached PGSemaphoreLock, the semaphore would be
left in the wrong state; and if another process did PGSemaphoreUnlock
for some unrelated reason, we might resume execution before the fact
that our XID was cleared was globally visible.
Also, improve the wording of some comments, rename nextClearXidElem
to firstClearXidElem in PROC_HDR for clarity, and drop some volatile
qualifiers that aren't necessary.
Amit Kapila, reviewed and slightly revised by me.
The setting values of some parameters including max_worker_processes
must be equal to or higher than the values on the master. However,
previously max_worker_processes was not listed as such parameter
in the document. So this commit adds it to that list.
Back-patch to 9.4 where max_worker_processes was added.
Most suites already did so via start_test_server(), but the pg_rewind,
pg_ctl and pg_controldata suites ran a postmaster or initdb with fsync
enabled. This halves the pg_rewind suite's runtime on buildfarm member
tern. It makes tern and that machine's other buildfarm members less
vulnerable to noise failures from postmaster startup overrunning the 60s
pg_ctl timeout. Back-patch to 9.5, where pg_rewind was introduced.
Currently, in-memory posting list during GIN build process is limited 1GB
because of using repalloc. The patch replaces call of repalloc to repalloc_huge.
It increases limit of posting list from 180 millions
(1GB / sizeof(ItemPointerData)) to 4 billions limited by maxcount/count fields
in GinEntryAccumulator and subsequent calls. Check added.
Also, fix accounting of allocatedMemory during build to prevent integer
overflow with maintenance_work_mem > 4GB.
Robert Abraham <robert.abraham86@googlemail.com> with additions by me
Bruce Momjian
Tom Lane
Robert Haas
Stephen Frost
Noah Misch
Andres Freund
Andrew Dunstan
Peter Eisentraut
Alvaro Herrera
Fujii Masao
Tatsuo Ishii
Teodor Sigaev
Michael Meskes
Kevin Grittner
Jeff Davis
Greg Stark
Magnus Hagander
Heikki Linnakangas