Previously, invoking pg_terminate_backend() or pg_cancel_backend()
with the postmaster PID produced a "PID XXXX is not a PostgresSQL
server process" warning, which does not make sense. Change to
"backend process" to make the message more exact.
Nathan Bossart, based on an idea from Bharath Rupireddy with
input from Tom Lane and Euler Taveira
Discussion: https://www.postgresql.org/message-id/flat/CALj2ACW7Rr-R7mBcBQiXWPp=JV5chajjTdudLiF5YcpW-BmHhg@mail.gmail.com
Instead of referring to target backends by pid, use pgprocno. This
means that we don't have to scan the ProcArray and we can drop some
special case code for dealing with the startup process.
Discussion: https://postgr.es/m/CA%2BhUKGLYRyDaneEwz5Uya_OgFLMx5BgJfkQSD%3Dq9HmwsfRRb-w%40mail.gmail.com
Reviewed-by: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Reviewed-by: Ashwin Agrawal <ashwinstar@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
The term "super-exclusive lock" is a synonym for "buffer cleanup lock"
that first appeared in nbtree many years ago. Standardize things by
consistently using the term cleanup lock. This finishes work started by
commit 276db875.
There is no good reason to have two terms. But there is a good reason
to only have one: to avoid confusion around why VACUUM acquires a full
cleanup lock (not just an ordinary exclusive lock) in index AMs, during
ambulkdelete calls. This has nothing to do with protecting the physical
index data structure itself. It is needed to implement a locking
protocol that ensures that TIDs pointing to the heap/table structure
cannot get marked for recycling by VACUUM before it is safe (which is
somewhat similar to how VACUUM uses cleanup locks during its first heap
pass). Note that it isn't strictly necessary for index AMs to implement
this locking protocol -- several index AMs use an MVCC snapshot as their
sole interlock to prevent unsafe TID recycling.
In passing, update the nbtree README. Cleanly separate discussion of
the aforementioned index vacuuming locking protocol from discussion of
the "drop leaf page pin" optimization added by commit 2ed5b87f. We now
structure discussion of the latter by describing how individual index
scans may safely opt out of applying the standard locking protocol (and
so can avoid blocking progress by VACUUM). Also document why the
optimization is not safe to apply during nbtree index-only scans.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzngHgQa92tz6NQihf4nxJwRzCV36yMJO_i8dS+2mgEVKw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkHPgsBBvGWjz=8PjNhDefy7XRkDKiT5NxMs-n5ZCf2dA@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
If lo_export() fails to open the target file or to write to it, it leaks
the created LargeObjectDesc and its snapshot in the top-transaction
context and resource owner. That's pretty harmless, it's a small leak
after all, but it gives the user a "Snapshot reference leak" warning.
Fix by using a short-lived memory context and no resource owner for
transient LargeObjectDescs that are opened and closed within one function
call. The leak is easiest to reproduce with lo_export() on a directory
that doesn't exist, but in principle the other lo_* functions could also
fail.
Backpatch to all supported versions.
Reported-by: Andrew B
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/32bf767a-2d65-71c4-f170-122f416bab7e@iki.fi
As in commits 6301c3ada and e9d9ba2a4, avoid doing repetitive
list_delete_first() operations, since that would be expensive when
there are many files waiting to be unlinked. This is a slightly
larger change than in those cases. We have to keep the list state
valid for calls to AbsorbSyncRequests(), so it's necessary to invent a
"canceled" field instead of immediately deleting PendingUnlinkEntry
entries. Also, because we might not be able to process all the
entries, we need a new list primitive list_delete_first_n().
list_delete_first_n() is almost list_copy_tail(), but it modifies the
input List instead of making a new copy. I found a couple of existing
uses of the latter that could profitably use the new function. (There
might be more, but the other callers look like they probably shouldn't
overwrite the input List.)
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
When replaying a transaction that held many exclusive locks on the
primary, a standby server's startup process would expend O(N^2)
effort on manipulating the list of locks. This code was fine when
written, but commit 1cff1b95a made repetitive list_delete_first()
calls inefficient, as explained in its commit message. Fix by just
iterating the list normally, and releasing storage only when done.
(This'd be inadequate if we needed to recover from an error occurring
partway through; but we don't.)
Back-patch to v13 where 1cff1b95a came in.
Nathan Bossart
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Users sometimes get concerned whe they start the server and it
emits a few messages and then doesn't emit any more messages for
a long time. Generally, what's happening is either that the
system is taking a long time to apply WAL, or it's taking a
long time to reset unlogged relations, or it's taking a long
time to fsync the data directory, but it's not easy to tell
which is the case.
To fix that, add a new 'log_startup_progress_interval' setting,
by default 10s. When an operation that is known to be potentially
long-running takes more than this amount of time, we'll log a
status update each time this interval elapses.
To avoid undesirable log chatter, don't log anything about WAL
replay when in standby mode.
Nitin Jadhav and Robert Haas, reviewed by Amul Sul, Bharath
Rupireddy, Justin Pryzby, Michael Paquier, and Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmoaHQrgDFOBwgY16XCoMtXxsrVGFB2jNCvb7-ubuEe1MGg@mail.gmail.com
Discussion: https://postgr.es/m/CAMm1aWaHF7VE69572_OLQ+MgpT5RUiUDgF1x5RrtkJBLdpRj3Q@mail.gmail.com
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
Do not update shm_mq's mq_bytes_written until we have written
an amount of data greater than 1/4th of the ring size, unless
the caller of shm_mq_send(v) requests a flush at the end of
the message. This reduces the number of calls to SetLatch(),
and also the number of CPU cache misses, considerably, and thus
makes shm_mq significantly faster.
Dilip Kumar, reviewed by Zhihong Yu and Tomas Vondra. Some
minor cosmetic changes by me.
Discussion: http://postgr.es/m/CAFiTN-tVXqn_OG7tHNeSkBbN+iiCZTiQ83uakax43y1sQb2OBA@mail.gmail.com
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
ProcArrayGroupClearXid function has a parameter named "proc",
but the same name was used for its local variables. This commit fixes
this variable shadowing, to improve code readability.
Back-patch to all supported versions, to make future back-patching
easy though this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
All size_t variables declared in procarray.c are actually int ones.
Let's use int instead of size_t for those variables. Which would
reduce Wsign-compare compiler warnings.
Back-patch to v14 where commit 941697c3c1 added size_t variables
in procarray.c, to make future back-patching easy though
this patch is classified as refactoring only.
Reported-by: Ranier Vilela
Author: Ranier Vilela, Aleksander Alekseev
https://postgr.es/m/CAEudQAqyoTZC670xWi6w-Oe2_Bk1bfu2JzXz6xRfiOUzm7xbyQ@mail.gmail.com
We don't allow relations to exceed 2^32-1 blocks, because block
numbers are 32 bits and the last possible block number is reserved
to mean InvalidBlockNumber. There is a check for this in mdextend,
but that's really way too late, because the smgr API requires us to
create a buffer for the block-to-be-added, and we do not want to
have any buffer with blocknum InvalidBlockNumber. (Such a case
can trigger assertions in bufmgr.c, plus I think it might confuse
ReadBuffer's logic for data-past-EOF later on.) So put the check
into ReadBuffer.
Per report from Christoph Berg. It's been like this forever,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/YTn1iTkUYBZfcODk@msg.credativ.de
This runtime-computed GUC shows the size of the server's main shared
memory area, taking into account the amount of shared memory allocated
by extensions as this is calculated after processing
shared_preload_libraries.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
All the code paths simplified here were already using a boolean or used
an expression that led to zero or one, making the extra bits
unnecessary.
Author: Justin Pryzby
Reviewed-by: Tom Lane, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/20210428182936.GE27406@telsasoft.com
This change refactors the shared memory size calculation in
CreateSharedMemoryAndSemaphores() to its own function. This is intended
for use in a future change related to the setup of huge pages and shared
memory with some GUCs, while useful on its own for extensions.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
We had a complaint that the postmaster fails to start if the invoking
program closes stdin. That happens because count_usable_fds expects
to be able to dup(0), and if it can't, we conclude there are no free
FDs and go belly-up. So far as I can find, though, there is no other
place in the server that touches stdin, and it's not unreasonable to
expect that a daemon wouldn't use that file.
As a simple improvement, let's dup FD 2 (stderr) instead. Unlike stdin,
it *is* reasonable for us to expect that stderr be open; even if we are
configured not to touch it, common libraries such as libc might try to
write error messages there.
Per gripe from Mario Emmenlauer. Given the lack of previous complaints,
I'm not excited about pushing this into stable branches, but it seems
OK to squeeze it into v14.
Discussion: https://postgr.es/m/48bafc63-c30f-3962-2ded-f2e985d93e86@emmenlauer.de
Use one fileset for the entire worker lifetime instead of using
separate filesets for each streaming transaction. Now, the
changes/subxacts files for every streaming transaction will be
created under the same fileset and the files will be deleted
after the transaction is completed.
This patch extends the BufFileOpenFileSet and BufFileDeleteFileSet
APIs to allow users to specify whether to give an error on missing
files.
Author: Dilip Kumar, based on suggestion by Thomas Munro
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Move fileset related implementation out of sharedfileset.c to allow its
usage by backends that don't want to share filesets among different
processes. After this split, fileset infrastructure is used by both
sharedfileset.c and worker.c for the named temporary files that survive
across transactions.
Author: Dilip Kumar, based on suggestion by Andres Freund
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Since a partitioned index doesn't have storage, getting the number of
blocks from it will not give sensible results. Existing callers
already check that they don't call it that way, so there doesn't
appear to be a live problem. But for correctness, handle
RELKIND_PARTITIONED_INDEX together with the other non-storage
relkinds.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/1d3a5fbe-f48b-8bea-80da-9a5c4244aef9@enterprisedb.com
Commit 80abbeba2 evidently didn't bother checking this code.
Also, list the generated executable in .gitignore (so it's
been a REALLY long time since anyone tried this).
Noted while trying out RISC-V spinlock patch. Given that
this has been broken for 5 years and nobody noticed, it's
likely not worth back-patching.
As reported by a few OSX buildfarm animals there exist at least one path where
temporary files exist during AtProcExit_Files() processing. As temporary file
cleanup causes pgstat reporting, the assertions added in ee3f8d3d3a caused
failures.
This is not an OSX specific issue, we were just lucky that timing on OSX
reliably triggered the problem. The known way to cause this is a FATAL error
during perform_base_backup() with a MANIFEST used - adding an elog(FATAL)
after InitializeBackupManifest() reliably reproduces the problem in isolation.
The problem is that the temporary file created in InitializeBackupManifest()
is not cleaned up via resource owner cleanup as WalSndResourceCleanup()
currently is only used for non-FATAL errors. That then allows to reach
AtProcExit_Files() with existing temporary files, causing the assertion
failure.
To fix this problem, move temporary file cleanup to a before_shmem_exit() hook
and add assertions ensuring that no temporary files are created before / after
temporary file management has been initialized / shut down. The cleanest way
to do so seems to be to split fd.c initialization into two, one for plain file
access and one for temporary file access.
Right now there's no need to perform further fd.c cleanup during process exit,
so I just renamed AtProcExit_Files() to BeforeShmemExit_Files(). Alternatively
we could perform another pass through the files to check that no temporary
files exist, but the added assertions seem to provide enough protection
against that.
It might turn out that the assertions added in ee3f8d3d3a will cause too much
noise - in that case we'll have to downgrade them to a WARNING, at least
temporarily.
This commit is not necessarily the best approach to address this issue, but it
should resolve the buildfarm failures. We can revise later.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210807190131.2bm24acbebl4wl6i@alap3.anarazel.de
For EXEC_BACKEND InitProcess()/InitAuxiliaryProcess() needs to have been
called well before we call BaseInit(), as SubPostmasterMain() needs LWLocks to
work. Having the order of initialization differ between platforms makes it
unnecessarily hard to understand the system and to add initialization points
for new subsystems without a lot of duplication.
To be able to change the order, BaseInit() cannot trigger
CreateSharedMemoryAndSemaphores() anymore - obviously that needs to have
happened before we can call InitProcess(). It seems cleaner to create shared
memory explicitly in single user/bootstrap mode anyway.
After this change the separation of bufmgr initialization into
InitBufferPoolAccess() / InitBufferPoolBackend() is not meaningful anymore so
the latter is removed.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
These have been unrelated since bgwriter and checkpointer were split into two
processes in 806a2aee37. As there several pending patches (shared memory
stats, extending the set of tracked IO / buffer statistics) that are made a
bit more awkward by the grouping, split them. Done separately to make
reviewing easier.
This does *not* change the contents of pg_stat_bgwriter or move fields out of
bgwriter/checkpointer stats that arguably do not belong in either. However
pgstat_fetch_global() was renamed and split into
pgstat_fetch_stat_checkpointer() and pgstat_fetch_stat_bgwriter().
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
Start up the checkpointer and bgwriter during crash recovery (except in
--single mode), as we do for replication. This wasn't done back in
commit cdd46c76 out of caution. Now it seems like a better idea to make
the environment as similar as possible in both cases. There may also be
some performance advantages.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ8NRsqgkZEnsnRc2MFROBV-jCnacbYvtpptK2A9YYp9Q%40mail.gmail.com
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
The point of introducing the hash_mem_multiplier GUC was to let users
reproduce the old behavior of hash aggregation, i.e. that it could use
more than work_mem at need. However, the implementation failed to get
the job done on Win64, where work_mem is clamped to 2GB to protect
various places that calculate memory sizes using "long int". As
written, the same clamp was applied to hash_mem. This resulted in
severe performance regressions for queries requiring a bit more than
2GB for hash aggregation, as they now spill to disk and there's no
way to stop that.
Getting rid of the work_mem restriction seems like a good idea, but
it's a big job and could not conceivably be back-patched. However,
there's only a fairly small number of places that are concerned with
the hash_mem value, and it turns out to be possible to remove the
restriction there without too much code churn or any ABI breaks.
So, let's do that for now to fix the regression, and leave the
larger task for another day.
This patch does introduce a bit more infrastructure that should help
with the larger task, namely pg_bitutils.h support for working with
size_t values.
Per gripe from Laurent Hasson. Back-patch to v13 where the
behavior change came in.
Discussion: https://postgr.es/m/997817.1627074924@sss.pgh.pa.us
Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com
5a1e1d8302 was a minimal bug fix for dc7420c2c9. To avoid future bugs of
that kind, deduplicate the choice of a relation's horizon into a new helper,
GlobalVisHorizonKindForRel().
As the code in question was only introduced in dc7420c2c9 it seems worth
backpatching this change as well, otherwise 14 will look different from all
other branches.
A different approach to this was suggested by Matthias van de Meent.
Author: Andres Freund
Discussion: https://postgr.es/m/20210621122919.2qhu3pfugxxp3cji@alap3.anarazel.de
Backpatch: 14, like 5a1e1d8302
We have an implementation restriction that PREPARE TRANSACTION can't
handle cases where both session-lifespan and transaction-lifespan locks
are held on the same lockable object. (That's because we'd otherwise
need to acquire a new PROCLOCK entry during post-prepare cleanup, which
is an operation that might fail. The situation can only arise with odd
usages of advisory locks, so removing the restriction is probably not
worth the amount of effort it would take.) AtPrepare_Locks attempted
to enforce this, but its logic was many bricks shy of a load, because
it only detected cases where the session and transaction locks had the
same lockmode. Locks of different modes on the same object would lead
to the rather unhelpful message "PANIC: we seem to have dropped a bit
somewhere".
To fix, build a transient hashtable with one entry per locktag,
not one per locktag + mode, and use that to detect conflicts.
Per bug #17122 from Alexander Pyhalov. This bug is ancient,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17122-04f3c32098a62233@postgresql.org
No concrete problem reported, but in the past it's been known to cause
problems on some compilers so let's avoid doing that.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/234364.1626704007%40sss.pgh.pa.us
A couple of open flags used in an assertion didn't exist in macOS 10.4.
Per build farm animal prairiedog. Also add O_EXCL while here (there are
a few more standard flags but they're not relevant and likely to be
missing).
Macs don't understand O_DIRECT, but they can disable caching with a
separate fcntl() call. Extend the file opening functions in fd.c to
handle this for us if the caller passes in PG_O_DIRECT.
For now, this affects only WAL data and even then only if you set:
max_wal_senders=0
wal_level=minimal
This is not expected to be very useful on its own, but later proposed
patches will make greater use of direct I/O, and it'll be useful for
testing if developers on Macs can see the effects.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BADiyyHe0cun2wfT%2BSVnFVqNYPxoO6J9zcZkVO7%2BNGig%40mail.gmail.com
As of v14, pg_depend contains almost 7000 "pin" entries recording
the OIDs of built-in objects. This is a fair amount of bloat for
every database, and it adds time to pg_depend lookups as well as
initdb. We can get rid of all of those entries in favor of an OID
range check, i.e. "OIDs below FirstUnpinnedObjectId are pinned".
(template1 and the public schema are exceptions. Those exceptions
are now wired into IsPinnedObject() instead of initdb's code for
filling pg_depend, but it's the same amount of cruft either way.)
The contents of pg_shdepend are modified likewise.
Discussion: https://postgr.es/m/3737988.1618451008@sss.pgh.pa.us
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
Several places were performing a tight loop to determine the first power
of 2 number that's > or >= the required memory. Instead of using a loop
for that, we can use pg_nextpower2_32 or pg_nextpower2_64. When we need a
power of 2 number equal to or greater than a given amount, we just pass
the amount to the nextpower2 function. When we need a power of 2 greater
than the amount, we just pass the amount + 1.
Additionally, in tsearch there were a couple of locations that were
performing a while loop when a simple "if" would have done. In both of
these locations only 1 item is being added, so the loop could only have
ever iterated once. Changing the loop into an if statement makes the code
very slightly more optimal as the condition is checked once rather than
twice.
There are quite a few remaining locations that increase the size of the
buffer in the following form:
while (reqsize >= buflen)
{
buflen *= 2;
buf = repalloc(buf, buflen);
}
These are not touched in this commit. repalloc will error out for sizes
larger than MaxAllocSize. Changing these to use pg_nextpower2_32 would
remove the chance of that error being raised. It's unclear from the code
if the sizes could ever become that large, so err on the side of caution.
Discussion: https://postgr.es/m/CAApHDvp=tns7RL4PH0ZR0M+M-YFLquK7218x=0B_zO+DbOma+w@mail.gmail.com
Reviewed-by: Zhihong Yu
In dc7420c2c9 I (Andres) accidentally used
RelationIsAccessibleInLogicalDecoding() as the sole condition to use the
non-shared catalog horizon in GetOldestNonRemovableTransactionId(). That is
incorrect, as RelationIsAccessibleInLogicalDecoding() checks whether wal_level
is logical.
The correct check, as done e.g. in GlobalVisTestFor(), is to check
IsCatalogRelation() and RelationIsAccessibleInLogicalDecoding().
The observed misbehavior of this bug was that there could be an endless loop
in lazy_scan_prune(), because the horizons used in heap_page_prune() and the
individual tuple liveliness checks did not match. Likely there are other
potential consequences as well.
A later commit will unify the determination which horizon has to be used, and
add additional assertions to make it easier to catch a bug like this.
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Diagnosed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wg32Y9+WJfw=aofkRx1ZRFt_Ev6bNPc4PSaz7PjSFtZgQ@mail.gmail.com
It was unable to wait on a backend that had already left the procarray.
Users tolerant of that limitation can poll pg_stat_activity. Other
users can employ the "timeout" argument of pg_terminate_backend().
Reviewed by Bharath Rupireddy.
Discussion: https://postgr.es/m/20210605013236.GA208701@rfd.leadboat.com
Revert the pg_description entry to its v13 form, since those messages
usually remain shorter and don't discuss individual parameters. No
catversion bump, since pg_description content does not impair backend
compatibility or application compatibility.
Justin Pryzby
Discussion: https://postgr.es/m/20210612182743.GY16435@telsasoft.com
941697c3c1 changed ProcArrayAdd()/Remove() substantially. As reported by
zhanyi, I missed that due to the introduction of the PGPROC->pgxactoff
ProcArrayRemove() does not need to search for the position in
procArray->pgprocnos anymore - that's pgxactoff. Remove the search loop.
The removal of the search loop reduces assertion coverage a bit - but we can
easily do better than before by adding assertions to other loops over
pgprocnos elements.
Also do a bit of cleanup, mostly by reducing line lengths by introducing local
helper variables and adding newlines.
Author: zhanyi <w@hidva.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/tencent_5624AA3B116B3D1C31CA9744@qq.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
If dtrace is compiled in but disabled, the lwlock dtrace probes still
evaluate their arguments. Since PostgreSQL 13, T_NAME(lock) does
nontrivial work, so it should be avoided if not needed. To fix, make
these calls conditional on the *_ENABLED() macro corresponding to each
probe.
Reviewed-by: Craig Ringer <craig.ringer@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/CAGRY4nwxKUS_RvXFW-ugrZBYxPFFM5kjwKT5O+0+Stuga5b4+Q@mail.gmail.com
Instead, put them in via a format placeholder. This reduces the
number of distinct translatable messages and also reduces the chances
of typos during translation. We already did this for the system call
arguments in a number of cases, so this is just the same thing taken a
bit further.
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
This adds a function, pg_wait_for_backend_termination(), and a new
timeout argument to pg_terminate_backend(), which will wait for the
backend to actually terminate (with or without signaling it to do so
depending on which function is called). The default behaviour of
pg_terminate_backend() remains being timeout=0 which does not waiting.
For pg_wait_for_backend_termination() the default wait is 5 seconds.
Author: Bharath Rupireddy
Reviewed-By: Fujii Masao, David Johnston, Muhammad Usama,
Hou Zhijie, Magnus Hagander
Discussion: https://postgr.es/m/CALj2ACUBpunmyhYZw-kXCYs5NM+h6oG_7Df_Tn4mLmmUQifkqA@mail.gmail.com
If you know the ID of a buffer that recently held a block that you would
like to pin, this function can be used check if it's still there. It
can be used to avoid a second lookup in the buffer mapping table after
PrefetchBuffer() reports a cache hit.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded. This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.
Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.
Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com
Snapshot caching, introduced in 623a9ba79b, did not increment
xactCompletionCount during subtransaction abort. That could lead to an older
snapshot being reused. That is, at least as far as I can see, not a
correctness issue (for MVCC snapshots there's no difference between "in
progress" and "aborted"). The only difference between the old and new
snapshots would be a newer ->xmax.
While HeapTupleSatisfiesMVCC makes the same visibility determination, reusing
the old snapshot leads HeapTupleSatisfiesMVCC to not set
HEAP_XMIN_INVALID. Which subsequently causes the kill_prior_tuple optimization
to not kick in (via HeapTupleIsSurelyDead() returning false). The performance
effects of doing the same index-lookups over and over again is how the issue
was discovered...
Fix the issue by incrementing xactCompletionCount in
XidCacheRemoveRunningXids. It already acquires ProcArrayLock exclusively,
making that an easy proposition.
Add a test to ensure that kill_prior_tuple prevents index growth when it
involves aborted subtransaction of the current transaction.
Author: Andres Freund
Discussion: https://postgr.es/m/20210406043521.lopeo7bbigad3n6t@alap3.anarazel.de
Discussion: https://postgr.es/m/20210317055718.v6qs3ltzrformqoa%40alap3.anarazel.de
Commit 3e98c0bafb added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.
Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.
On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.
When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.
There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.
Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com
Maxim Orlov reported that the shutdown of standby server could result in
the following assertion failure. The cause of this issue was that,
when the shutdown caused the startup process to exit, recovery-time
transaction tracking was not shut down even if it's already initialized,
and some locks the tracked transactions were holding could not be released.
At this situation, if other process was invoked and the PGPROC entry that
the startup process used was assigned to it, it found such unreleased locks
and caused the assertion failure, during the initialization of it.
TRAP: FailedAssertion("SHMQueueEmpty(&(MyProc->myProcLocks[i]))"
This commit fixes this issue by making the startup process shut down
transaction tracking and release all locks, at the exit of it.
Back-patch to all supported branches.
Reported-by: Maxim Orlov
Author: Fujii Masao
Reviewed-by: Maxim Orlov
Discussion: https://postgr.es/m/ad4ce692cc1d89a093b471ab1d969b0b@postgrespro.ru
pgstat_report_wait_start() and pgstat_report_wait_end() required two
conditional branches so far. One to check if MyProc is NULL, the other to
check if pgstat_track_activities is set. As wait events are used around
comparatively lightweight operations, and are inlined (reducing branch
predictor effectiveness), that's not great.
The dependency on MyProc has a second disadvantage: Low-level subsystems, like
storage/file/fd.c, report wait events, but architecturally it is preferable
for them to not depend on inter-process subsystems like proc.h (defining
PGPROC). After this change including pgstat.h (nor obviously its
sub-components like backend_status.h, wait_event.h, ...) does not pull in IPC
related headers anymore.
These goals, efficiency and abstraction, are achieved by having
pgstat_report_wait_start/end() not interact with MyProc, but instead a new
my_wait_event_info variable. At backend startup it points to a local variable,
removing the need to check for MyProc being NULL. During process
initialization my_wait_event_info is redirected to MyProc->wait_event_info. At
shutdown this is reversed. Because wait event reporting now does not need to
know about where the wait event is stored, it does not need to know about
PGPROC anymore.
The removal of the branch for checking pgstat_track_activities is simpler:
Don't check anymore. The cost due to the branch are often higher than the
store - and even if not, pgstat_track_activities is rarely disabled.
The main motivator to commit this work now is that removing the (indirect)
pgproc.h include from pgstat.h simplifies a patch to move statistics reporting
to shared memory (which still has a chance to get into 14).
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
This commit is mostly a revert of aaa3aed, that switched the routine
doing the internal renaming of recycled WAL segments to use on Windows a
combination of CreateHardLinkA() plus unlink() instead of rename(). As
reported by several users of Postgres 13, this is causing concurrency
issues when manipulating WAL segments, mostly in the shape of the
following error:
LOG: could not rename file "pg_wal/000000XX000000YY000000ZZ":
Permission denied
This moves back to a logic where a single rename() (well, pgrename() for
Windows) is used. This issue has proved to be hard to hit when I tested
it, facing it only once with an archive_command that was not able to do
its work, so it is environment-sensitive. The reporters of this issue
have been able to confirm that the situation improved once we switched
back to a single rename(). In order to check things, I have provided to
the reporters a patched build based on 13.2 with aaa3aed reverted, to
test if the error goes away, and an unpatched build of 13.2 to test if
the error still showed up (just to make sure that I did not mess up my
build process).
Extra thanks to Fujii Masao for pointing out what looked like the
culprit commit, and to all the reporters for taking the time to test
what I have sent them.
Reported-by: Andrus, Guy Burgess, Yaroslav Pashinsky, Thomas Trenz
Reviewed-by: Tom Lane, Andres Freund
Discussion: https://postgr.es/m/3861ff1e-0923-7838-e826-094cc9bef737@hot.ee
Discussion: https://postgr.es/m/16874-c3eecd319e36a2bf@postgresql.org
Discussion: https://postgr.es/m/095ccf8d-7f58-d928-427c-b17ace23cae6@burgess.co.nz
Discussion: https://postgr.es/m/16927-67c570d968c99567%40postgresql.org
Discussion: https://postgr.es/m/YFBcRbnBiPdGZvfW@paquier.xyz
Backpatch-through: 13
Since commit 2ce439f3 we have opened every file in the data directory
and called fsync() at the start of crash recovery. This can be very
slow if there are many files, leading to field complaints of systems
taking minutes or even hours to begin crash recovery.
Provide an alternative method, for Linux only, where we call syncfs() on
every possibly different filesystem under the data directory. This is
equivalent, but avoids faulting in potentially many inodes from
potentially slow storage.
The new mode comes with some caveats, described in the documentation, so
the default value for the new setting is "fsync", preserving the older
behavior.
Reported-by: Michael Brown <michael.brown@discourse.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Paul Guo <guopa@vmware.com>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: David Steele <david@pgmasters.net>
Discussion: https://postgr.es/m/11bc2bb7-ecb5-3ad0-b39f-df632734cd81%40discourse.org
Discussion: https://postgr.es/m/CAEET0ZHGnbXmi8yF3ywsDZvb3m9CbdsGZgfTXscQ6agcbzcZAw%40mail.gmail.com
After a crash of a backend using temporary files, the files used to be
left behind, on the basis that it might be useful for debugging. But we
don't have any reports of anyone actually doing that, and it means the
disk usage may grow over time due to repeated backend failures (possibly
even hitting ENOSPC). So this behavior is a bit unfortunate, and fixing
it required either manual cleanup (deleting files, which is error-prone)
or restart of the instance (i.e. service disruption).
This implements automatic cleanup of temporary files, controled by a new
GUC remove_temp_files_after_crash. By default the files are removed, but
it can be disabled to restore the old behavior if needed.
Author: Euler Taveira
Reviewed-by: Tomas Vondra, Michael Paquier, Anastasia Lubennikova, Thomas Munro
Discussion: https://postgr.es/m/CAH503wDKdYzyq7U-QJqGn%3DGm6XmoK%2B6_6xTJ-Yn5WSvoHLY1Ww%40mail.gmail.com
This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.
This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.
Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.
Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp
1. Backends waiting for buffer I/O are now interruptible.
2. If something goes wrong in a backend that is currently performing
I/O, waiting backends no longer wake up until that backend reaches
AbortBufferIO() and broadcasts on the CV. Previously, any waiters would
wake up (because the I/O lock was automatically released) and then
busy-loop until AbortBufferIO() cleared BM_IO_IN_PROGRESS.
3. LWLockMinimallyPadded is removed, as it would now be unused.
Author: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier version, 2016)
Discussion: https://postgr.es/m/CA%2BhUKGJ8nBFrjLuCTuqKN0pd2PQOwj9b_jnsiGFFMDvUxahj_A%40mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmoaj2aPti0yho7FeEf2qt-JgQPRWb0gci_o1Hfr=C56Xng@mail.gmail.com
Cut down on system calls and other overheads by waiting for SIGURG
explicitly with kqueue instead of using a signal handler and self-pipe.
Affects *BSD and macOS systems.
This leaves only the poll implementation with a signal handler and the
traditional self-pipe trick.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
Cut down on system calls and other overheads by reading from a signalfd
instead of using a signal handler and self-pipe. Affects Linux sytems,
and possibly others including illumos that implement the Linux epoll and
signalfd interfaces.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
Traditionally, SIGUSR1 has been overloaded for ad-hoc signals,
procsignal.c signals and latch.c wakeups. Move that last use over to a
new dedicated signal. SIGURG is normally used to report out-of-band
socket data, but PostgreSQL doesn't use that facility.
The signal handler is now installed in all postmaster children by
InitializeLatchSupport(). Those wishing to disconnect from it should
call ShutdownLatchSupport().
Future patches will use this separation of signals to avoid the need for
a signal handler on some operating systems.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
Commit 82ebbeb0 added a workaround for systems with no epoll_create1()
and EPOLL_CLOEXEC. Linux < 2.6.27 and glibc < 2.9 are long gone. Now
seems like a good time to drop the extra code, because otherwise we'd
have to add similar already-dead workaround code to new patches using
XXX_CLOEXEC flags that arrived in the same kernel release.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKL_%3DaO%3Dr30N%3Ds9VoDgTqHpRSzePRbA9dkYO7snc7HsxA%40mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
As envisioned in commit c98763bf51, it is possible for VACUUM to
ignore certain transactions that are executing CREATE INDEX CONCURRENTLY
and REINDEX CONCURRENTLY for the purposes of computing Xmin; that's
because we know those transactions are not going to examine any other
tables, and are not going to execute anything else in the same
transaction. (Only operations on "safe" indexes can be ignored: those
on indexes that are neither partial nor expressional).
This is extremely useful in cases where CIC/RC can run for a very long
time, because that used to be a significant headache for concurrent
vacuuming of other tables.
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20210115133858.GA18931@alvherre.pgsql
Commit 46d6e5f567 added the atomic variable "waitStart" into PGPROC struct,
to store the time at which wait for lock acquisition started. Previously
this variable was initialized every time each backend started. Instead,
this commit makes postmaster initialize it at the startup, to ensure that
the variable should be initialized before any use of it.
This commit also moves the code to initialize "waitStart" variable for
prepare transaction, from TwoPhaseGetDummyProc() to MarkAsPreparingGuts().
Because MarkAsPreparingGuts() is more proper place to do that since
it initializes other PGPROC variables.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi
Discussion: https://postgr.es/m/1df88660-6f08-cc6e-b7e2-f85296a2bdab@oss.nttdata.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
John Naylor
Bruce Momjian
Tom Lane
Peter Eisentraut
Thomas Munro
Peter Geoghegan
Michael Paquier
Amit Kapila
Alexander Korotkov
Heikki Linnakangas
Robert Haas
Noah Misch
Daniel Gustafsson
Fujii Masao
Andres Freund
David Rowley
Andrew Dunstan
Magnus Hagander
Stephen Frost
Etsuro Fujita
Tomas Vondra
Alvaro Herrera