Remove duplicate implementation of catalog munging and miscellaneous
privilege and consistency checks. Instead rely on already existing data
in objectaddress.c to do the work.
Author: KaiGai Kohei
Tweaked by me
Reviewed by Robert Haas
Instead of having each object type implement the catalog munging
independently, centralize knowledge about how to do it and expand the
existing table in objectaddress.c with enough data about each object
type to support this operation.
Author: KaiGai Kohei
Tweaks by me
Reviewed by Robert Haas
If the label is already in the enum the statement becomes a no-op.
This will reduce the pain that comes from our not allowing this
operation inside a transaction block.
Andrew Dunstan, reviewed by Tom Lane and Magnus Hagander.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries. Notable changes:
* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.) Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.
* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization. We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.
* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.
* Assorted corner-case bug fixes.
There's probably still some bugs left, but this is a lot closer to being
real than it was before.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
Parse analysis neglected to cover the case of a WITH clause attached to an
intermediate-level set operation; it only handled WITH at the top level
or WITH attached to a leaf-level SELECT. Per report from Adam Mackler.
In HEAD, I rearranged the order of SelectStmt's fields to put withClause
with the other fields that can appear on non-leaf SelectStmts. In back
branches, leave it alone to avoid a possible ABI break for third-party
code.
Back-patch to 8.4 where WITH support was added.
They don't actually do anything yet; that will get fixed in a
follow-on commit. But this gets the basic infrastructure in place,
including CREATE/ALTER/DROP EVENT TRIGGER; support for COMMENT,
SECURITY LABEL, and ALTER EXTENSION .. ADD/DROP EVENT TRIGGER;
pg_dump and psql support; and documentation for the anticipated
initial feature set.
Dimitri Fontaine, with review and a bunch of additional hacking by me.
Thom Brown extensively reviewed earlier versions of this patch set,
but there's not a whole lot of that code left in this commit, as it
turns out.
Formerly, when trying to copy both indexes and comments, CREATE TABLE LIKE
had to pre-assign names to indexes that had comments, because it made up an
explicit CommentStmt command to apply the comment and so it had to know the
name for the index. This creates bad interactions with other indexes, as
shown in bug #6734 from Daniele Varrazzo: the preassignment logic couldn't
take any other indexes into account so it could choose a conflicting name.
To fix, add a field to IndexStmt that allows it to carry a comment to be
assigned to the new index. (This isn't a user-exposed feature of CREATE
INDEX, only an internal option.) Now we don't need preassignment of index
names in any situation.
I also took the opportunity to refactor DefineIndex to accept the IndexStmt
as such, rather than passing all its fields individually in a mile-long
parameter list.
Back-patch to 9.2, but no further, because it seems too dangerous to change
IndexStmt or DefineIndex's API in released branches. The bug exists back
to 9.0 where CREATE TABLE LIKE grew the ability to copy comments, but given
the lack of prior complaints we'll just let it go unfixed before 9.2.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
Mostly, this consists of adding support for fields which exist in the
structure but aren't handled by copy/equal/outfuncs; but the create
foreign table case can actually produce garbage output.
Noah Misch
Add a queryId field to Query and PlannedStmt. This is not used by the
core backend, except for being copied around at appropriate times.
It's meant to allow plug-ins to track a particular query forward from
parse analysis to execution.
The queryId is intentionally not dumped into stored rules (and hence this
commit doesn't bump catversion). You could argue that choice either way,
but it seems better that stored rule strings not have any dependency
on plug-ins that might or might not be present.
Also, add a post_parse_analyze_hook that gets invoked at the end of
parse analysis (but only for top-level analysis of complete queries,
not cases such as analyzing a domain's default-value expression).
This is mainly meant to be used to compute and assign a queryId,
but it could have other applications.
Peter Geoghegan
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
We already skip rewriting the table in these cases, but we still force a
whole table scan to validate the data. This can be skipped, and thus
we can make the whole ALTER TABLE operation just do some catalog touches
instead of scanning the table, when these two conditions hold:
(a) Old and new pg_constraint.conpfeqop match exactly. This is actually
stronger than needed; we could loosen things by way of operator
families, but it'd require a lot more effort.
(b) The functions, if any, implementing a cast from the foreign type to
the primary opcintype are the same. For this purpose, we can consider a
binary coercion equivalent to an exact type match. When the opcintype
is polymorphic, require that the old and new foreign types match
exactly. (Since ri_triggers.c does use the executor, the stronger check
for polymorphic types is no mere future-proofing. However, no core type
exercises its necessity.)
Author: Noah Misch
Committer's note: catalog version bumped due to change of the Constraint
node. I can't actually find any way to have such a node in a stored
rule, but given that we have "out" support for them, better be safe.
The original implementation of this interpreted it as a kind of
"inheritance" facility and named all the internal structures
accordingly. This turned out to be very confusing, because it has
nothing to do with the INHERITS feature. So rename all the internal
parser infrastructure, update the comments, adjust the error messages,
and split up the regression tests.
ALTER DOMAIN / DROP CONSTRAINT on a nonexistent constraint name did
not report any error. Now it reports an error. The IF EXISTS option
was added to get the usual behavior of ignoring nonexistent objects to
drop.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
The WITH [NO] DATA option was not supported, nor the ability to specify
replacement column names; the former limitation wasn't even documented, as
per recent complaint from Naoya Anzai. Fix by moving the responsibility
for supporting these options into the executor. It actually takes less
code this way ...
catversion bump due to change in representation of IntoClause, which might
affect stored rules.
This gets rid of an impressive amount of duplicative code, with only
minimal behavior changes. DROP FOREIGN DATA WRAPPER now requires object
ownership rather than superuser privileges, matching the documentation
we already have. We also eliminate the historical warning about dropping
a built-in function as unuseful. All operations are now performed in the
same order for all object types handled by dropcmds.c.
KaiGai Kohei, with minor revisions by me
Per spec we ought to apply select_common_collation() across the expressions
in each column of the VALUES table. The original coding was just taking
the first row and assuming it was representative.
This patch adds a field to struct RangeTblEntry to carry the resolved
collations, so initdb is forced for changes in stored rule representation.
Instead of playing cute games with pathkeys, just build a direct
representation of the intended sub-select, and feed it through
query_planner to get a Path for the index access. This is a bit slower
than 9.1's previous method, since we'll duplicate most of the overhead of
query_planner; but since the whole optimization only applies to rather
simple single-table queries, that probably won't be much of a problem in
practice. The advantage is that we get to do the right thing when there's
a partial index that needs the implicit IS NOT NULL clause to be usable.
Also, although this makes planagg.c be a bit more closely tied to the
ordering of operations in grouping_planner, we can get rid of some coupling
to lower-level parts of the planner. Per complaint from Marti Raudsepp.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
Remove the unconditional superuser permissions check in CREATE EXTENSION,
and instead define a "superuser" extension property, which when false
(not the default) skips the superuser permissions check. In this case
the calling user only needs enough permissions to execute the commands
in the extension's installation script. The superuser property is also
enforced in the same way for ALTER EXTENSION UPDATE cases.
In other ALTER EXTENSION cases and DROP EXTENSION, test ownership of
the extension rather than superuserness. ALTER EXTENSION ADD/DROP needs
to insist on ownership of the target object as well; to do that without
duplicating code, refactor comment.c's big switch for permissions checks
into a separate function in objectaddress.c.
I also removed the superuserness checks in pg_available_extensions and
related functions; there's no strong reason why everybody shouldn't
be able to see that info.
Also invent an IF NOT EXISTS variant of CREATE EXTENSION, and use that
in pg_dump, so that dumps won't fail for installed-by-default extensions.
We don't have any of those yet, but we will soon.
This is all per discussion of wrapping the standard procedural languages
into extensions. I'll make those changes in a separate commit; this is
just putting the core infrastructure in place.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
The recent additions for FDW support required checking foreign-table-ness
in several places in the parse/plan chain. While it's not clear whether
that would really result in a noticeable slowdown, it seems best to avoid
any performance risk by keeping a copy of the relation's relkind in
RangeTblEntry. That might have some other uses later, anyway.
Per discussion.
Add a fdwhandler column to pg_foreign_data_wrapper, plus HANDLER options
in the CREATE FOREIGN DATA WRAPPER and ALTER FOREIGN DATA WRAPPER commands,
plus pg_dump support for same. Also invent a new pseudotype fdw_handler
with properties similar to language_handler.
This is split out of the "FDW API" patch for ease of review; it's all stuff
we will certainly need, regardless of any other details of the FDW API.
FDW handler functions will not actually get called yet.
In passing, fix some omissions and infelicities in foreigncmds.c.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
This follows recent discussions, so it's quite a bit different from
Dimitri's original. There will probably be more changes once we get a bit
of experience with it, but let's get it in and start playing with it.
This is still just core code. I'll start converting contrib modules
shortly.
Dimitri Fontaine and Tom Lane
This is an essential component of making the extension feature usable;
first because it's needed in the process of converting an existing
installation containing "loose" objects of an old contrib module into
the extension-based world, and second because we'll have to use it
in pg_dump --binary-upgrade, as per recent discussion.
Loosely based on part of Dimitri Fontaine's ALTER EXTENSION UPGRADE
patch.
This patch adds the server infrastructure to support extensions.
There is still one significant loose end, namely how to make it play nice
with pg_upgrade, so I am not yet committing the changes that would make
all the contrib modules depend on this feature.
In passing, fix a disturbingly large amount of breakage in
AlterObjectNamespace() and callers.
Dimitri Fontaine, reviewed by Anssi Kääriäinen,
Itagaki Takahiro, Tom Lane, and numerous others
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
This feature allows a unique or pkey constraint to be created using an
already-existing unique index. While the constraint isn't very
functionally different from the bare index, it's nice to be able to do that
for documentation purposes. The main advantage over just issuing a plain
ALTER TABLE ADD UNIQUE/PRIMARY KEY is that the index can be created with
CREATE INDEX CONCURRENTLY, so that there is not a long interval where the
table is locked against updates.
On the way, refactor some of the code in DefineIndex() and index_create()
so that we don't have to pass through those functions in order to create
the index constraint's catalog entries. Also, in parse_utilcmd.c, pass
around the ParseState pointer in struct CreateStmtContext to save on
notation, and add error location pointers to some error reports that didn't
have one before.
Gurjeet Singh, reviewed by Steve Singer and Tom Lane
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
This commit adds columns amoppurpose and amopsortfamily to pg_amop, and
column amcanorderbyop to pg_am. For the moment all the entries in
amcanorderbyop are "false", since the underlying support isn't there yet.
Also, extend the CREATE OPERATOR CLASS/ALTER OPERATOR FAMILY commands with
[ FOR SEARCH | FOR ORDER BY sort_operator_family ] clauses to allow the new
columns of pg_amop to be populated, and create pg_dump support for dumping
that information.
I also added some documentation, although it's perhaps a bit premature
given that the feature doesn't do anything useful yet.
Teodor Sigaev, Robert Haas, Tom Lane
Per my recent proposal, get rid of all the direct inspection of indexes
and manual generation of paths in planagg.c. Instead, set up
EquivalenceClasses for the aggregate argument expressions, and let the
regular path generation logic deal with creating paths that can satisfy
those sort orders. This makes planagg.c a bit more visible to the rest
of the planner than it was originally, but the approach is basically a lot
cleaner than before. A major advantage of doing it this way is that we get
MIN/MAX optimization on inheritance trees (using MergeAppend of indexscans)
practically for free, whereas in the old way we'd have had to add a whole
lot more duplicative logic.
One small disadvantage of this approach is that MIN/MAX aggregates can no
longer exploit partial indexes having an "x IS NOT NULL" predicate, unless
that restriction or something that implies it is specified in the query.
The previous implementation was able to use the added "x IS NOT NULL"
condition as an extra predicate proof condition, but in this version we
rely entirely on indexes that are considered usable by the main planning
process. That seems a fair tradeoff for the simplicity and functionality
gained.
The core of this patch is hash_array() and associated typcache
infrastructure, which works just about exactly like the existing support
for array comparison.
In addition I did some work to ensure that the planner won't think that an
array type is hashable unless its element type is hashable, and similarly
for sorting. This includes adding a datatype parameter to op_hashjoinable
and op_mergejoinable, and adding an explicit "hashable" flag to
SortGroupClause. The lack of a cross-check on the element type was a
pre-existing bug in mergejoin support --- but it didn't matter so much
before, because if you couldn't sort the element type there wasn't any good
alternative to failing anyhow. Now that we have the alternative of hashing
the array type, there are cases where we can avoid a failure by being picky
at the planner stage, so it's time to be picky.
The issue of exactly how to combine the per-element hash values to produce
an array hash is still open for discussion, but the rest of this is pretty
solid, so I'll commit it as-is.
After much expenditure of effort, we've got this to the point where the
performance penalty is pretty minimal in typical cases.
Andrew Dunstan, reviewed by Brendan Jurd, Dean Rasheed, and Tom Lane
This is not the hoped-for facility of using INSERT/UPDATE/DELETE inside
a WITH, but rather the other way around. It seems useful in its own
right anyway.
Note: catversion bumped because, although the contents of stored rules
might look compatible, there's actually a subtle semantic change.
A single Query containing a WITH and INSERT...VALUES now represents
writing the WITH before the INSERT, not before the VALUES. While it's
not clear that that matters to anyone, it seems like a good idea to
have it cited in the git history for catversion.h.
Original patch by Marko Tiikkaja, with updating and cleanup by
Hitoshi Harada.
This patch adds the SQL-standard concept of an INSTEAD OF trigger, which
is fired instead of performing a physical insert/update/delete. The
trigger function is passed the entire old and/or new rows of the view,
and must figure out what to do to the underlying tables to implement
the update. So this feature can be used to implement updatable views
using trigger programming style rather than rule hacking.
In passing, this patch corrects the names of some columns in the
information_schema.triggers view. It seems the SQL committee renamed
them somewhere between SQL:99 and SQL:2003.
Dean Rasheed, reviewed by Bernd Helmle; some additional hacking by me.
The point of a PlaceHolderVar is to allow a non-strict expression to be
evaluated below an outer join, after which its value bubbles up like a Var
and can be forced to NULL when the outer join's semantics require that.
However, there was a serious design oversight in that, namely that we
didn't ensure that there was actually a correct place in the plan tree
to evaluate the placeholder :-(. It may be necessary to delay evaluation
of an outer join to ensure that a placeholder that should be evaluated
below the join can be evaluated there. Per recent bug report from Kirill
Simonov.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
The implicitly created sequence was created as owned by the current user,
who could be different from the table owner, eg if current user is a
superuser or some member of the table's owning role. This caused sanity
checks in the SEQUENCE OWNED BY code to spit up. Although possibly we
don't need those sanity checks, the safest fix seems to be to make sure
the implicit sequence is assigned the same owner role as the table has.
(We still do all permissions checks as the current user, however.)
Per report from Josh Berkus.
Back-patch to 9.0. The bug goes back to the invention of SEQUENCE OWNED BY
in 8.2, but the fix requires an API change for DefineRelation(), which seems
to have potential for breaking third-party code if done in a minor release.
Given the lack of prior complaints, it's probably not worth fixing in the
stable branches.
other columns to be referenced without listing them in GROUP BY, so long as
the primary key column(s) are listed in GROUP BY.
Eventually we should also allow functional dependency on a UNIQUE constraint
when the columns are marked NOT NULL, but that has to wait until NOT NULL
constraints are represented in pg_constraint, because we need to have
pg_constraint OIDs for all the conditions needed to ensure functional
dependency.
Peter Eisentraut, reviewed by Alex Hunsaker and Tom Lane
This operates in the same way as other CREATE OR REPLACE commands, ie,
it replaces everything but the ownership and ACL lists of an existing
entry, and requires the caller to have owner privileges for that entry.
While modifying an existing language has some use in development scenarios,
in typical usage all the "replaced" values come from pg_pltemplate so there
will be no actual change in the language definition. The reason for adding
this is mainly to allow programs to ensure that a language exists without
triggering an error if it already does exist.
This commit just adds and documents the new option. A followon patch
will use it to clean up some unpleasant cases in pg_dump and pg_regress.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
This patch allows the frame to start from CURRENT ROW (in either RANGE or
ROWS mode), and it also adds support for ROWS n PRECEDING and ROWS n FOLLOWING
start and end points. (RANGE value PRECEDING/FOLLOWING isn't there yet ---
the grammar works, but that's all.)
Hitoshi Harada, reviewed by Pavel Stehule
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
8.2beta but never carried out. This avoids repetitive tests of whether the
argument is of scalar or composite type. Also, be a bit more paranoid about
composite arguments in some places where we previously weren't checking.
Index expression columns are now named after the FigureColname result for
their expressions, rather than always being "pg_expression_N". Digits are
appended to this name if needed to make the column name unique within the
index. (That happens for regular columns too, thus fixing the old problem
that CREATE INDEX fooi ON foo (f1, f1) fails. Before exclusion indexes
there was no real reason to do such a thing, but now maybe there is.)
Default names for indexes and associated constraints now include the column
names of all their columns, not only the first one as in previous practice.
(Of course, this will be truncated as needed to fit in NAMEDATALEN. Also,
pkey indexes retain the historical behavior of not naming specific columns
at all.)
An example of the results:
regression=# create table foo (f1 int, f2 text,
regression(# exclude (f1 with =, lower(f2) with =));
NOTICE: CREATE TABLE / EXCLUDE will create implicit index "foo_f1_lower_exclusion" for table "foo"
CREATE TABLE
regression=# \d foo_f1_lower_exclusion
Index "public.foo_f1_lower_exclusion"
Column | Type | Definition
--------+---------+------------
f1 | integer | f1
lower | text | lower(f2)
btree, for table "public.foo"
non-kluge method for controlling the order in which values are fed to an
aggregate function. At the same time eliminate the old implementation
restriction that DISTINCT was only supported for single-argument aggregates.
Possibly release-notable behavioral change: formerly, agg(DISTINCT x)
dropped null values of x unconditionally. Now, it does so only if the
agg transition function is strict; otherwise nulls are treated as DISTINCT
normally would, ie, you get one copy.
Andrew Gierth, reviewed by Hitoshi Harada
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
underneath the Limit node, not atop it. This fixes the old problem that such
a query might unexpectedly return fewer rows than the LIMIT says, due to
LockRows discarding updated rows.
There is a related problem that LockRows might destroy the sort ordering
produced by earlier steps; but fixing that by pushing LockRows below Sort
would create serious performance problems that are unjustified in many
real-world applications, as well as potential deadlock problems from locking
many more rows than expected. Instead, keep the present semantics of applying
FOR UPDATE after ORDER BY within a single query level; but allow the user to
specify the other way by writing FOR UPDATE in a sub-select. To make that
work, track whether FOR UPDATE appeared explicitly in sub-selects or got
pushed down from the parent, and don't flatten a sub-select that contained an
explicit FOR UPDATE.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
are named in the UPDATE's SET list.
Note: the schema of pg_trigger has not actually changed; we've just started
to use a column that was there all along. catversion bumped anyway so that
this commit is included in the history of potentially interesting changes
to system catalog contents.
Itagaki Takahiro
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
Create a new catalog pg_db_role_setting where they are now stored, and better
encapsulate the code that deals with settings into its realm. The old
datconfig and rolconfig columns are removed.
psql has gained a \drds command to display the settings.
Backwards compatibility warning: while the backwards-compatible system views
still have the config columns, they no longer completely represent the
configuration for a user or database.
Catalog version bumped.
inheritance parent tables are compared using equal(), instead of doing
strcmp() on the nodeToString representation. The old implementation was
always a tad cheesy, and it finally fails completely as of 8.4, now that the
node tree might contain syntax location information. equal() knows it's
supposed to ignore those fields, but strcmp() hardly can. Per recent
report from Scott Ribe.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
This was foreseen to be a good idea long ago, but nobody had got round
to doing it. The recent patch for deferred unique constraints made
transformConstraintAttrs() ugly enough that I decided it was time.
This change will also greatly simplify parsing of deferred CHECK constraints,
if anyone ever gets around to implementing that.
While at it, add a location field to Constraint, and use that to provide
an error cursor for some of the constraint-related error messages.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
types in CREATE TRIGGER. While at it, clean up the amazingly tedious and
inextensible way that the trigger event type list was handled. Per report
from Greg Sabino Mullane.
constants through full joins, as in
select * from tenk1 a full join tenk1 b using (unique1)
where unique1 = 42;
which should generate a fairly cheap plan where we apply the constraint
unique1 = 42 in each relation scan. This had been broken by my patch of
2008-06-27, which is now reverted in favor of a more invasive but hopefully
less incorrect approach. That patch was meant to prevent incorrect extraction
of OR'd indexclauses from OR conditions above an outer join. To do that
correctly we need more information than the outerjoin_delay flag can provide,
so add a nullable_relids field to RestrictInfo that records exactly which
relations are nulled by outer joins that are underneath a particular qual
clause. A side benefit is that we can make the test in create_or_index_quals
more specific: it is now smart enough to extract an OR'd indexclause into the
outer side of an outer join, even though it must not do so in the inner side.
The old coding couldn't distinguish these cases so it could not do either.
are individually labeled, rather than just grouped under an "InitPlan"
or "SubPlan" heading. This in turn makes it possible for decompilation of
a subplan reference to usefully identify which subplan it's referencing.
I also made InitPlans identify which parameter symbol(s) they compute,
so that references to those parameters elsewhere in the plan tree can
be connected to the initplan that will be executed. Per a gripe from
Robert Haas about EXPLAIN output of a WITH query being inadequate,
plus some longstanding pet peeves of my own.
of adding optional namespace and action fields to DefElem. Having three
node types that do essentially the same thing bloats the code and leads
to errors of confusion, such as in yesterday's bug report from Khee Chin.
for consistency with the (relatively) recent addition of typmod to SubLink.
An example of why it's a good idea is to be seen in the recent "failed to
locate grouping columns" bug, which wouldn't have happened if a SubPlan
exposed the same typmod info as the SubLink it was derived from.
This could be back-patched, since it doesn't affect any on-disk data format,
but for the moment it doesn't seem necessary to do so.
making pull_up_sublinks() construct a full-blown JoinExpr tree representation
of IN/EXISTS SubLinks that it is able to convert to semi or anti joins.
This makes pull_up_sublinks() a shade more complex, but the gain in semantic
clarity is worth it. I still have more to do in this area to address the
previously-discussed problems, but this commit in itself fixes at least one
bug in HEAD, as shown by added regression test case.
wrappers (similar to procedural languages). This way we don't need to retain
the nearly empty libraries, and we are more free in how to implement the
wrapper API in the future.
qualifier, and add support for this in pg_dump.
This allows TOAST tables to have user-defined fillfactor, and will also
enable us to move the autovacuum parameters to reloptions without taking
away the possibility of setting values for TOAST tables.
patch. This includes the ability to force the frame to cover the whole
partition, and the ability to make the frame end exactly on the current row
rather than its last ORDER BY peer. Supporting any more of the full SQL
frame-clause syntax will require nontrivial hacking on the window aggregate
code, so it'll have to wait for 8.5 or beyond.
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
the visibility map patch that because autovacuum always sets
VacuumStmt->freeze_min_age, visibility map was never used for autovacuum,
only for manually launched vacuums. This patch introduces a new scan_all
field to VacuumStmt, indicating explicitly whether the visibility map
should be used, or the whole relation should be scanned, to advance
relfrozenxid. Anti-wraparound vacuums still need to scan all pages.
return the tableoid as well as the ctid for any FOR UPDATE targets that
have child tables. All child tables are listed in the ExecRowMark list,
but the executor just skips the ones that didn't produce the current row.
Curiously, this longstanding restriction doesn't seem to have been documented
anywhere; so no doc changes.
we extended the appendrel mechanism to support UNION ALL optimization. The
reason nobody noticed was that we are not actually using attr_needed data for
appendrel children; hence it seems more reasonable to rip it out than fix it.
Back-patch to 8.2 because an Assert failure is possible in corner cases.
Per examination of an example from Jim Nasby.
In HEAD, also get rid of AppendRelInfo.col_mappings, which is quite inadequate
to represent UNION ALL situations; depend entirely on translated_vars instead.
that represent some expression that we desire to compute below the top level
of the plan, and then let that value "bubble up" as though it were a plain
Var (ie, a column value).
The immediate application is to allow sub-selects to be flattened even when
they are below an outer join and have non-nullable output expressions.
Formerly we couldn't flatten because such an expression wouldn't properly
go to NULL when evaluated above the outer join. Now, we wrap it in a
PlaceHolderVar and arrange for the actual evaluation to occur below the outer
join. When the resulting Var bubbles up through the join, it will be set to
NULL if necessary, yielding the correct results. This fixes a planner
limitation that's existed since 7.1.
In future we might want to use this mechanism to re-introduce some form of
Hellerstein's "expensive functions" optimization, ie place the evaluation of
an expensive function at the most suitable point in the plan tree.
the column alias names of the RTE referenced by the Var to the RowExpr.
This is needed to allow ruleutils.c to correctly deparse FieldSelect nodes
referencing such a construct. Per my recent bug report.
Adding a field to RowExpr forces initdb (because of stored rules changes)
so this solution is not back-patchable; which is unfortunate because 8.2
and 8.3 have this issue. But it only affects EXPLAIN for some pretty odd
corner cases, so we can probably live without a solution for the back
branches.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
SELECT foo.*) so that it cannot be confused with a quoted identifier "*".
Instead create a separate node type A_Star to represent this notation.
Per pgsql-hackers discussion of 2007-Sep-27.
most node types used in expression trees (both before and after parse
analysis). This allows us to place an error cursor in many situations
where we formerly could not, because the information wasn't available
beyond the very first level of parse analysis. There's a fair amount
of work still to be done to persuade individual ereport() calls to actually
include an error location, but this gets the initdb-forcing part of the
work out of the way; and the situation is already markedly better than
before for complaints about unimplementable implicit casts, such as
CASE and UNION constructs with incompatible alternative data types.
Per my proposal of a few days ago.
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
the old JOIN_IN code, but antijoins are new functionality.) Teach the planner
to convert appropriate EXISTS and NOT EXISTS subqueries into semi and anti
joins respectively. Also, LEFT JOINs with suitable upper-level IS NULL
filters are recognized as being anti joins. Unify the InClauseInfo and
OuterJoinInfo infrastructure into "SpecialJoinInfo". With that change,
it becomes possible to associate a SpecialJoinInfo with every join attempt,
which permits some cleanup of join selectivity estimation. That needs to be
taken much further than this patch does, but the next step is to change the
API for oprjoin selectivity functions, which seems like material for a
separate patch. So for the moment the output size estimates for semi and
especially anti joins are quite bogus.
but seem like a separate patch since most of the remaining work is on the
executor side.) I took the opportunity to push selection of the grouping
operators for set operations into the parser where it belongs. Otherwise this
is just a small exercise in making prepunion.c consider both alternatives.
As with the recent DISTINCT patch, this means we can UNION on datatypes that
can hash but not sort, and it means that UNION without ORDER BY is no longer
certain to produce sorted output.
as per my recent proposal:
1. Fold SortClause and GroupClause into a single node type SortGroupClause.
We were already relying on them to be struct-equivalent, so using two node
tags wasn't accomplishing much except to get in the way of comparing items
with equal().
2. Add an "eqop" field to SortGroupClause to carry the associated equality
operator. This is cheap for the parser to get at the same time it's looking
up the sort operator, and storing it eliminates the need for repeated
not-so-cheap lookups during planning. In future this will also let us
represent GROUP/DISTINCT operations on datatypes that have hash opclasses
but no btree opclasses (ie, they have equality but no natural sort order).
The previous representation simply didn't work for that, since its only
indicator of comparison semantics was a sort operator.
3. Add a hasDistinctOn boolean to struct Query to explicitly record whether
the distinctClause came from DISTINCT or DISTINCT ON. This allows removing
some complicated and not 100% bulletproof code that attempted to figure
that out from the distinctClause alone.
This patch doesn't in itself create any new capability, but it's necessary
infrastructure for future attempts to use hash-based grouping for DISTINCT
and UNION/INTERSECT/EXCEPT.
so long as all the trailing arguments are of the same (non-array) type.
The function receives them as a single array argument (which is why they
have to all be the same type).
It might be useful to extend this facility to aggregates, but this patch
doesn't do that.
This patch imposes a noticeable slowdown on function lookup --- a follow-on
patch will fix that by adding a redundant column to pg_proc.
Pavel Stehule
sequence to be reset to its original starting value. This requires adding the
original start value to the set of parameters (columns) of a sequence object,
which is a user-visible change with potential compatibility implications;
it also forces initdb.
Also add hopefully-SQL-compatible RESTART/CONTINUE IDENTITY options to
TRUNCATE TABLE. RESTART IDENTITY executes ALTER SEQUENCE RESTART for all
sequences "owned by" any of the truncated relations. CONTINUE IDENTITY is
a no-op option.
Zoltan Boszormenyi
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
directly to all the member expressions, instead of the previous implementation
where the ARRAY[] constructor would infer a common element type and then we'd
coerce the finished array after the fact. This has a number of benefits,
one being that we can allow an empty ARRAY[] construct so long as its
element type is specified by such a cast.
Brendan Jurd, minor fixes by me.
AlterTSConfigurationStmt. All utility statement node types are expected
to be supported here, though they do not have to have outfuncs/readfuncs
support. Found by running regression tests with COPY_PARSE_PLAN_TREES
enabled.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
sets for outer joins, in the light of bug #3588 and additional thought and
experimentation. The original methodology was fatally flawed for nests of
more than two outer joins: it got the relationships between adjacent joins
right, but didn't always come to the right conclusions about whether a join
could be interchanged with one two or more levels below it. This was largely
caused by a mistaken idea that we should use the min_lefthand + min_righthand
sets of a sub-join as the minimum left or right input set of an upper join
when we conclude that the sub-join can't commute with the upper one. If
there's a still-lower join that the sub-join *can* commute with, this method
led us to think that that one could commute with the topmost join; which it
can't. Another problem (not directly connected to bug #3588) was that
make_outerjoininfo's processing-order-dependent method for enforcing outer
join identity #3 didn't work right: if we decided that join A could safely
commute with lower join B, we dropped all information about sub-joins under B
that join A could perhaps not safely commute with, because we removed B's
entire min_righthand from A's.
To fix, make an explicit computation of all inner join combinations that occur
below an outer join, and add to that the full syntactic relsets of any lower
outer joins that we determine it can't commute with. This method gives much
more direct enforcement of the outer join rearrangement identities, and it
turns out not to cost a lot of additional bookkeeping.
Thanks to Richard Harris for the bug report and test case.
with a plpgsql-defined cursor. The underlying mechanism for this is that the
main SQL engine will now take "WHERE CURRENT OF $n" where $n is a refcursor
parameter. Not sure if we should document that fact or consider it an
implementation detail. Per discussion with Pavel Stehule.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
in cases where a sub-SELECT inserts a WHERE clause between two outer joins,
that clause may prevent us from re-ordering the two outer joins. The code
was considering only the joins' own ON-conditions in determining reordering
safety, which is not good enough. Add a "delay_upper_joins" flag to
OuterJoinInfo to flag that we have detected such a clause and higher-level
outer joins shouldn't be permitted to commute with this one. (This might
seem overly coarse, but given the current rules for OJ reordering, it's
sufficient AFAICT.)
The failure case is actually pretty narrow: it needs a WHERE clause within
the RHS of a left join that checks the RHS of a lower left join, but is not
strict for that RHS (else we'd have simplified the lower join to a plain
join). Even then no failure will be manifest unless the planner chooses to
rearrange the join order.
Per bug report from Adam Terrey.
types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
available information about the typmod of an expression; namely, Const,
ArrayRef, ArrayExpr, and EXPR and ARRAY SubLinks. In the ArrayExpr and
SubLink cases it wasn't really the data structure's fault, but exprTypmod()
being lazy. This seems like a good idea in view of the expected increase in
typmod usage from Teodor's work to allow user-defined types to have typmods.
In particular this responds to the concerns we had about eliminating the
special-purpose hack that exprTypmod() used to have for BPCHAR Consts.
We can now tell whether or not such a Const has been cast to a specific
length, and report or display properly if so.
initdb forced due to changes in stored rules.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
FAMILY; and add FAMILY option to CREATE OPERATOR CLASS to allow adding a
class to a pre-existing family. Per previous discussion. Man, what a
tedious lot of cutting and pasting ...
representation of equivalence classes of variables. This is an extensive
rewrite, but it brings a number of benefits:
* planner no longer fails in the presence of "incomplete" operator families
that don't offer operators for every possible combination of datatypes.
* avoid generating and then discarding redundant equality clauses.
* remove bogus assumption that derived equalities always use operators
named "=".
* mergejoins can work with a variety of sort orders (e.g., descending) now,
instead of tying each mergejoinable operator to exactly one sort order.
* better recognition of redundant sort columns.
* can make use of equalities appearing underneath an outer join.
which comparison operators to use for plan nodes involving tuple comparison
(Agg, Group, Unique, SetOp). Formerly the executor looked up the default
equality operator for the datatype, which was really pretty shaky, since it's
possible that the data being fed to the node is sorted according to some
nondefault operator class that could have an incompatible idea of equality.
The planner knows what it has sorted by and therefore can provide the right
equality operator to use. Also, this change moves a couple of catalog lookups
out of the executor and into the planner, which should help startup time for
pre-planned queries by some small amount. Modify the planner to remove some
other cavalier assumptions about always being able to use the default
operators. Also add "nulls first/last" info to the Plan node for a mergejoin
--- neither the executor nor the planner can cope yet, but at least the API is
in place.