When ExecBRUpdateTriggers switches to a new target tuple as a result
of the EvalPlanQual logic, it must form a new proposed update tuple.
Since commit 86dc90056, that tuple (the result of
ExecGetUpdateNewTuple) has been a virtual tuple that might contain
pointers to by-ref fields of the new target tuple (in "oldslot").
However, immediately after that we materialize oldslot, causing it to
drop its buffer pin, whereupon the by-ref pointers are unsafe to use.
This is a live bug only when the new target tuple is in a different
page than the original target tuple, since we do still hold a pin on
the original one. (Before 86dc90056, there was no bug because the
EPQ plantree would hold a pin on the new target tuple; but now that's
not assured.) To fix, forcibly materialize the new tuple before we
materialize oldslot. This costs nothing since we would have done that
shortly anyway.
The real-world impact of this is probably minimal. A visible failure
could occur if the new target tuple's buffer were recycled for some
other page in the short interval before we materialize newslot within
the trigger-calling loop; but that's quite unlikely given that we'd
just touched that page. There's a larger hazard that some other
process could prune and repack that page within the window. We have
lock on the new target tuple, but that wouldn't prevent it being moved
on the page.
Alexander Lakhin and Tom Lane, per bug #17798 from Alexander Lakhin.
Back-patch to v14 where 86dc90056 came in.
Discussion: https://postgr.es/m/17798-0907404928dcf0dd@postgresql.org
We've long had a policy that any toasted fields in a catalog tuple
should be pulled in-line before entering the tuple in a catalog cache.
However, that requires access to the catalog's toast table, and we'll
typically do AcceptInvalidationMessages while opening the toast table.
So it's possible that the catalog tuple is outdated by the time we
finish detoasting it. Since no cache entry exists yet, we can't
mark the entry stale during AcceptInvalidationMessages, and instead
we'll press forward and build an apparently-valid cache entry. The
upshot is that we have a race condition whereby an out-of-date entry
could be made in a backend's catalog cache, and persist there
indefinitely causing indeterminate misbehavior.
To fix, use the existing systable_recheck_tuple code to recheck
whether the catalog tuple is still up-to-date after we finish
detoasting it. If not, loop around and restart the process of
searching the catalog and constructing cache entries from the top.
The case is rare enough that this shouldn't create any meaningful
performance penalty, even in the SearchCatCacheList case where
we need to tear down and reconstruct the whole list.
Indeed, the case is so rare that AFAICT it doesn't occur during
our regression tests, and there doesn't seem to be any easy way
to build a test that would exercise it reliably. To allow
testing of the retry code paths, add logic (in USE_ASSERT_CHECKING
builds only) that randomly pretends that the recheck failed about
one time out of a thousand. This is enough to ensure that we'll
pass through the retry paths during most regression test runs.
By adding an extra level of looping, this commit creates a need
to reindent most of SearchCatCacheMiss and SearchCatCacheList.
I'll do that separately, to allow putting those changes in
.git-blame-ignore-revs.
Patch by me; thanks to Alexander Lakhin for having built a test
case to prove the bug is real, and to Xiaoran Wang for review.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/1393953.1698353013@sss.pgh.pa.us
Discussion: https://postgr.es/m/CAGjhLkOoBEC9mLsnB42d3CO1vcMx71MLSEuigeABbQ8oRdA6gw@mail.gmail.com
This changes the pg_attribute field attstattarget into a nullable
field in the variable-length part of the row. If no value is set by
the user for attstattarget, it is now null instead of previously -1.
This saves space in pg_attribute and tuple descriptors for most
practical scenarios. (ATTRIBUTE_FIXED_PART_SIZE is reduced from 108
to 104.) Also, null is the semantically more correct value.
The ANALYZE code internally continues to represent the default
statistics target by -1, so that that code can avoid having to deal
with null values. But that is now contained to the ANALYZE code.
Only the DDL code deals with attstattarget possibly null.
For system columns, the field is now always null. The ANALYZE code
skips system columns anyway.
To set a column's statistics target to the default value, the new
command form ALTER TABLE ... SET STATISTICS DEFAULT can be used. (SET
STATISTICS -1 still works.)
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/4da8d211-d54d-44b9-9847-f2a9f1184c76@eisentraut.org
A superuser may create a subscription with password_required=true, but
which uses a connection string without a password.
Previously, if the owner of such a subscription was changed to a
non-superuser, the non-superuser was able to utilize a password from
another source (like a password file or the PGPASSWORD environment
variable), which should not have been allowed.
This commit adds a step to re-validate the connection string before
connecting.
Reported-by: Jeff Davis
Author: Vignesh C
Reviewed-by: Peter Smith, Robert Haas, Amit Kapila
Discussion: https://www.postgresql.org/message-id/flat/e5892973ae2a80a1a3e0266806640dae3c428100.camel%40j-davis.com
Backpatch-through: 16
BuildDescForRelation() has all the knowledge for converting a
ColumnDef into pg_attribute/tuple descriptor. ATExecAddColumn() can
make use of that, instead of duplicating all that logic. We just pass
a one-element list of ColumnDef and we get back exactly the data
structure we need. Note that we don't even need to touch
BuildDescForRelation() to make this work.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
jit.c and dfgr.c had a copy of the same code to check if a file exists
or not, with a twist: jit.c did not check for EACCES when failing the
stat() call for the path whose existence is tested. This refactored
routine will be used by an upcoming patch.
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
This is a rework of 7021d3b176, where we relied on forcing
max_logical_replication_workers to 0 in the postgres command. This
commit now prevents logical replication launchers to start using -b and
a backend-side check based on IsBinaryUpgrade, effective when upgrading
from 17 and newer versions.
This commit improves the comments explaining why this restriction is
necessary.
This discussion was on hold until we were sure how to add support for
subscribers in pg_upgrade, something now done thanks to 9a17be1e24.
Reviewed-by: Álvaro Herrera, Amit Kapila, Tom Lane
Discussion: https://postgr.es/m/ZU2TeVkUg5qEi7Oy@paquier.xyz
The code for wrapping subquery output expressions in PlaceHolderVars
believed that if the expression already was a PlaceHolderVar, it was
never necessary to wrap that in another one. That's wrong if the
expression is underneath an outer join and involves a lateral
reference to outside that scope: failing to add an additional PHV
risks evaluating the expression at the wrong place and hence not
forcing it to null when the outer join should do so. This is an
oversight in commit 9e7e29c75, which added logic to forcibly wrap
lateral-reference Vars in PlaceHolderVars, but didn't see that the
adjacent case for PlaceHolderVars needed the same treatment.
The test case we have for this doesn't fail before 4be058fe9, but now
that I see the problem I wonder if it is possible to demonstrate
related errors before that. That's moot though, since all such
branches are out of support.
Per bug #18284 from Holger Reise. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18284-47505a20c23647f8@postgresql.org
Instead, just have lazy_scan_prune() and lazy_scan_noprune() update
LVRelState->nonempty_pages directly. This makes the two functions
more similar and also removes makes lazy_scan_noprune need one fewer
output parameters.
Melanie Plageman, reviewed by Andres Freund, Michael Paquier, and me
Discussion: http://postgr.es/m/CAAKRu_btji_wQdg=ok-5E4v_bGVxKYnnFFe7RA6Frc1EcOwtSg@mail.gmail.com
This makes it possible to access information about the progress
of WAL summarization from SQL. The previously-added functions
pg_available_wal_summaries() and pg_wal_summary_contents() only
examine on-disk state, but this function exposes information from
the server's shared memory.
Discussion: http://postgr.es/m/CA+Tgmobvqqj-DW9F7uUzT-cQqs6wcVb-Xhs=w=hzJnXSE-kRGw@mail.gmail.com
In commit 3e51b278d I (tgl) caused initdb to leave lc_messages and
other lc_xxx GUCs commented-out in the installed postgresql.conf file
if they were going to be set to 'C'. This was a hack for cosmetic
purposes, and it was buggy because lc_messages' wired-in default is
not 'C' but '' (empty string). That led to --no-locale not having
the expected effect, since the postmaster would then obtain
lc_messages from its startup environment.
Let's just revert to the prior behavior of always de-commenting the
lc_xxx entries; the argument for changing that longstanding behavior
was weak in the first place.
Also, fix postgresql.conf.sample's erroneous claim that the default
value of lc_messages is 'C'. I suspect that was what misled me into
making this mistake in the first place.
Report and patch by Kyotaro Horiguchi. Back-patch to v16 where
the problem was introduced.
Discussion: https://postgr.es/m/20231122.162700.1995154567625541112.horikyota.ntt@gmail.com
These were not testing the same thing as the comparable Assert
in calc_nestloop_required_outer(), because we neglected to map
the given Paths' relids to top-level relids. When considering
a partition child join the latter is the correct thing to do.
This oversight is old, but since it's only an overly-weak Assert
check there doesn't seem to be much value in back-patching.
Richard Guo (with cosmetic changes and comment updates by me)
Discussion: https://postgr.es/m/CAMbWs49sqbe9GBZ8sy8dSfKRNURgicR85HX8vgzcgQsPF0XY1w@mail.gmail.com
Commit 9d9c02ccd, which added the notion of a "run condition" for
window functions, neglected to teach nodeFuncs.c to process the new
field. Remarkably, that doesn't seem to have had any ill effects
before we invented Var.varnullingrels, but now it can cause visible
failures in join-removal scenarios.
I have no faith that there's not reachable problems in v15 too,
so back-patch the code change to v15 where 9d9c02ccd came in.
The test case seems irrelevant to v15, though.
Per bug #18277 from Zuming Jiang. Diagnosis and patch by
Richard Guo.
Discussion: https://postgr.es/m/18277-089ead83b329a2fd@postgresql.org
Both lwlocknames.txt and wait_event_names.txt contain a list of all
the predefined LWLocks, i.e., those with predefined positions
within MainLWLockArray. It is easy to miss one or the other,
especially since the list in wait_event_names.txt omits the "Lock"
suffix from all the LWLock wait events. This commit adds a cross-
check of these lists to the script that generates lwlocknames.h.
If the lists do not match exactly, building will fail.
Suggested-by: Robert Haas
Reviewed-by: Robert Haas, Michael Paquier, Bertrand Drouvot
Discussion: https://postgr.es/m/20240102173120.GA1061678%40nathanxps13
The target relation for INSERT/UPDATE/DELETE/MERGE has a different behavior
than other relations in EvalPlanQual() and RETURNING clause. This is why we
forbid target relation to be either source or target relation in SJE.
It's not clear if we could ever support this.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b9e8f460-f9a6-0e9b-e8ba-60d59f0bc22c%40gmail.com
When SJE uses RelOptInfo.unique_for_rels cache, it passes filtered quals to
innerrel_is_unique_ext(). That might lead to an invalid match to cache entries
made by previous non self-join checking calls. Add UniqueRelInfo.self_join
flag to prevent such cases. Also, fix that SJE should require a strict match
of outerrelids to make sure UniqueRelInfo.extra_clauses are valid.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/4788f781-31bd-9796-d7d6-588a751c8787%40gmail.com
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these. Use them in postgres_fdw,
replacing a local implementation from which the libpqsrv implementation
derives. This is a bug fix for dblink. Code inspection identified the
bug at least thirteen years ago, but user complaints have not appeared.
Hence, no back-patch for now.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
Since commit 599b33b94, this function assumed that every RTE_RELATION
RangeTblEntry would have an associated RelOptInfo. But that's not so:
we only build RelOptInfos for relations that are scanned by the query.
In particular the target of an INSERT won't have one, so that Vars
appearing in an INSERT ... RETURNING list will not have an associated
RelOptInfo. This apparently wasn't a problem before commit f7816aec2
taught examine_simple_variable() to drill down into CTEs containing
INSERT RETURNING, but it is now.
To fix, add a fallback code path that gets the userid to use directly
from the RTEPermissionInfo associated with the RTE. (Sadly, we must
have two code paths, because not every RTE has a RTEPermissionInfo
either.)
Per report from Alexander Lakhin. No back-patch, since the case is
apparently unreachable before f7816aec2.
Discussion: https://postgr.es/m/608a4886-6c60-0f9e-97d5-591256bd4150@gmail.com
During the calculations of the maximum for the number of buckets, take into
account that later we round that to the next power of 2.
Reported-by: Karen Talarico
Bug: #16925
Discussion: https://postgr.es/m/16925-ec96d83529d0d629%40postgresql.org
Author: Thomas Munro, Andrei Lepikhov, Alexander Korotkov
Reviewed-by: Alena Rybakina
Backpatch-through: 12
When the SJE code handles the transfer of qual clauses from the removed
relation to the remaining one, it replaces the Vars of the removed
relation with the Vars of the remaining relation for each clause, and
then reintegrates these clauses into the appropriate restriction or join
clause lists, while attempting to avoid duplicates.
However, the code compares RestrictInfo->clause to determine if two
clauses are duplicates. This is just flat wrong. Two RestrictInfos
with the same clause can have different required_relids,
incompatible_relids, is_pushed_down, and so on. This can cause qual
clauses to be mistakenly omitted, leading to wrong results.
This patch fixes it by comparing the entire RestrictInfos not just their
clauses ignoring 'rinfo_serial' field (otherwise almost all RestrictInfos will
be unique). Making 'rinfo_serial' equal_ignore would break other code. This
is why this commit implements our own comparison function for checking the
equality of RestrictInfos.
Reported-by: Zuming Jiang
Bug: #18261
Discussion: https://postgr.es/m/18261-2a75d748c928609b%40postgresql.org
Author: Richard Guo
A typo has been introduced by 31966b151e when updating the state of a
local buffer when a temporary relation is extended, for the case of a
block included in the relation range extended, when it is already found
in the hash table holding the local buffers. In this case, BM_VALID
should be cleared, but the buffer state was changed so as BM_VALID
remained while clearing the other flags.
As reported on the thread, it was possible to corrupt the state of the
local buffers on ENOSPC, but the states would be corrupted on any kind
of ERROR during the relation extend (like partial writes or some other
errno).
Reported-by: Alexander Lakhin
Author: Tender Wang
Reviewed-by: Richard Guo, Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/18259-6e256429825dd435@postgresql.org
Backpatch-through: 16
If we have DECHIST statistics about the argument expression, use
the average number of distinct elements as the array length estimate.
(It'd be better to use the average total number of elements, but
that is not currently calculated by compute_array_stats(), and
it's unclear that it'd be worth extra effort to get.)
To do this, we have to change the signature of estimate_array_length
to pass the "root" pointer. While at it, also change its result
type to "double". That's probably not really necessary, but it
avoids any risk of overflow of the value extracted from DECHIST.
All existing callers are going to use the result in a "double"
calculation anyway.
Paul Jungwirth, reviewed by Jian He and myself
Discussion: https://postgr.es/m/CA+renyUnM2d+SmrxKpDuAdpiq6FOM=FByvi6aS6yi__qyf6j9A@mail.gmail.com
Many foreach loops only use the ListCell pointer to retrieve the
content of the cell, like so:
ListCell *lc;
foreach(lc, mylist)
{
int myint = lfirst_int(lc);
...
}
This commit adds a few convenience macros that automatically
declare the loop variable and retrieve the current cell's contents.
This allows us to rewrite the previous loop like this:
foreach_int(myint, mylist)
{
...
}
This commit also adjusts a few existing loops in order to add
coverage for the new/adjusted macros. There is presently no plan
to bulk update all foreach loops, as that could introduce a
significant amount of back-patching pain. Instead, these macros
are primarily intended for use in new code.
Author: Jelte Fennema-Nio
Reviewed-by: David Rowley, Alvaro Herrera, Vignesh C, Tom Lane
Discussion: https://postgr.es/m/CAGECzQSwXKnxGwW1_Q5JE%2B8Ja20kyAbhBHO04vVrQsLcDciwXA%40mail.gmail.com
This adds a new ALTER TABLE subcommand ALTER COLUMN ... SET EXPRESSION
that changes the generation expression of a generated column.
The syntax is not standard but was adapted from other SQL
implementations.
This command causes a table rewrite, using the usual ALTER TABLE
mechanisms. The implementation is similar to and makes use of some of
the infrastructure of the SET DATA TYPE subcommand (for example,
rebuilding constraints and indexes afterwards). The new command
requires a new pass in AlterTablePass, and the ADD COLUMN pass had to
be moved earlier so that combinations of ADD COLUMN and SET EXPRESSION
can work.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b94yyJeGA-5M951_Lr+KfZokOp-2kXicpmEhi5FXhBeTog@mail.gmail.com
1349d2790 added code to allow DISTINCT and ORDER BY aggregates to work
more efficiently by using presorted input. That commit added some code
that made use of the AggState's tmpcontext and adjusted the
ecxt_outertuple and ecxt_innertuple slots before checking if the current
row is distinct from the previously seen row. That code forgot to set the
TupleTableSlots back to what they were originally, which could result in
errors such as:
ERROR: attribute 1 of type record has wrong type
This only affects aggregate functions which have multiple arguments when
DISTINCT is used. For example: string_agg(DISTINCT col, ', ')
Thanks to Tom Lane for identifying the breaking commit.
Bug: #18264
Reported-by: Vojtěch Beneš
Discussion: https://postgr.es/m/18264-e363593d7e9feb7d@postgresql.org
Backpatch-through: 16, where 1349d2790 was added
This patch changes the existing 'conflicting' field to 'conflict_reason'
in pg_replication_slots. This new field indicates the reason for the
logical slot's conflict with recovery. It is always NULL for physical
slots, as well as for logical slots which are not invalidated. The
non-NULL values indicate that the slot is marked as invalidated. Possible
values are:
wal_removed = required WAL has been removed.
rows_removed = required rows have been removed.
wal_level_insufficient = the primary doesn't have a wal_level sufficient
to perform logical decoding.
The existing users of 'conflicting' column can get the same answer by
using 'conflict_reason' IS NOT NULL.
Author: Shveta Malik
Reviewed-by: Amit Kapila, Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/ZYOE8IguqTbp-seF@paquier.xyz
CheckPWChallengeAuth() would return STATUS_ERROR if the user does not
exist or has no password assigned, even if the client disconnected
without responding to the password challenge (as libpq often will,
for example). We should return STATUS_EOF in that case, and the
lower-level functions do, but this code level got it wrong since the
refactoring done in 7ac955b34. This breaks the intent of not logging
anything for EOF cases (cf. comments in auth_failed()) and might
also confuse users of ClientAuthentication_hook.
Per report from Liu Lang. Back-patch to all supported versions.
Discussion: https://postgr.es/m/b725238c-539d-cb09-2bff-b5e6cb2c069c@esgyn.cn
Second attempt at 283a95da92. Since we can't reorder the enum values
of JsonPathItemType, instead reorder the switch cases where they are
used to generally follow the order of the enum values, for better
maintainability.
This reverts commit 283a95da92.
The reordering of JsonPathItemType affects the binary on-disk
compatibility of the jsonpath type, so we must not change it. Revert
for now and consider.
Swap the arguments to TimestampDifferenceMilliseconds so that we get
a positive answer instead of zero.
Then use the result of that computation instead of ignoring it.
Per reports from Alexander Lakhin.
Discussion: http://postgr.es/m/8b686764-7ac1-74c3-70f9-b64685a2535f@gmail.com
Avoid leaving a dangling pointer in the unlikely event that
nsphash_create fails. Improve comments, and fix formatting by
adding typedefs.list entries.
Discussion: https://postgr.es/m/3972900.1704145107@sss.pgh.pa.us
This feature will allow us to replicate the changes on subscriber nodes
after the upgrade.
Previously, only the subscription metadata information was preserved.
Without the list of relations and their state, it's not possible to
re-enable the subscriptions without missing some records as the list of
relations can only be refreshed after enabling the subscription (and
therefore starting the apply worker). Even if we added a way to refresh
the subscription while enabling a publication, we still wouldn't know
which relations are new on the publication side, and therefore should be
fully synced, and which shouldn't.
To preserve the subscription relations, this patch teaches pg_dump to
restore the content of pg_subscription_rel from the old cluster by using
binary_upgrade_add_sub_rel_state SQL function. This is supported only
in binary upgrade mode.
The subscription's replication origin is needed to ensure that we don't
replicate anything twice.
To preserve the replication origins, this patch teaches pg_dump to update
the replication origin along with creating a subscription by using
binary_upgrade_replorigin_advance SQL function to restore the
underlying replication origin remote LSN. This is supported only in
binary upgrade mode.
pg_upgrade will check that all the subscription relations are in 'i'
(init) or in 'r' (ready) state and will error out if that's not the case,
logging the reason for the failure. This helps to avoid the risk of any
dangling slot or origin after the upgrade.
Author: Vignesh C, Julien Rouhaud, Shlok Kyal
Reviewed-by: Peter Smith, Masahiko Sawada, Michael Paquier, Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/20230217075433.u5mjly4d5cr4hcfe@jrouhaud
The brinbuildCallbackParallel callback used by parallel BRIN builds did
not consider that the parallel table scans may be synchronized, starting
from an arbitrary block and then wrap around.
If this happened and the scan actually did wrap around, tuples from the
beginning of the table were added to the last range produced by the same
worker. The index would be missing range at the beginning of the table,
while the last range would be too wide. This would not produce incorrect
query results, but it'd be less efficient.
Fixed by checking for both past and future ranges in the callback. The
worker may produce multiple summaries for the same page range, but the
leader will merge them as if the summaries came from different workers.
Discussion: https://postgr.es/m/c2ee7d69-ce17-43f2-d1a0-9811edbda6e6%40enterprisedb.com
Commit b437571714 added support for parallel builds for BRIN indexes,
using code similar to BTREE parallel builds, and also a new tuplesort
variant. This commit simplifies the new code in two ways:
* The "spool" grouping tuplesort and the heap/index is not necessary.
The heap/index are available as separate arguments, causing confusion.
So remove the spool, and use the tuplesort directly.
* The new tuplesort variant does not need the heap/index, as it sorts
simply by the range block number, without accessing the tuple data.
So simplify that too.
Initial report and patch by Ranier Vilela, further cleanup by me.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqD7f2i4iyEaAz-5o-bf6zXVX-AkNUBm-YjUXEemaEh6A%40mail.gmail.com
Commit 16671ba6e7 moved the code that sends "sorry, too many clients
already" and other such messages, but it had the effect that we would
send that error even if the the startup packet processing failed, e.g.
because the client sent an invalid startup packet. That was not
intentional.
Spotted while reading the code again.
When enabled (default off), this logs a backtrace anytime elog() or an
equivalent ereport() for internal errors is called.
This is not well covered by the existing backtrace_functions, because
there are many equally-worded low-level errors in many functions. And
if you find out where the error is, then you need to manually rewrite
the elog() to ereport() to attach the errbacktrace(), which is
annoying. Having a backtrace automatically on every elog() call could
be very helpful during development for various kinds of common errors
from palloc, syscache, node support, etc.
Discussion: https://www.postgresql.org/message-id/flat/ba76c6bc-f03f-4285-bf16-47759cfcab9e@eisentraut.org
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
This function was originally coded with a handmade expansion
of the array subscripts. We can do it a little faster and far
more legibly today, by using unnest() WITH ORDINALITY.
While at it, let's apply the rowcount estimation support that exists
for the underlying unnest() function: reduce the default ROWS estimate
to 100 and attach array_unnest_support. I'm not sure that
array_unnest_support can do anything useful today with the call sites
that exist in information_schema, but it can't hurt, and the existing
default rowcount of 1000 is surely much too high for any of these
cases.
The psql.sql regression script is using _pg_expandarray() as a
test case for \sf+. While we could keep doing so, the new one-line
function body makes a poor test case for \sf+ row-numbering, so
switch it to print another information_schema function.
Discussion: https://postgr.es/m/1424303.1703355485@sss.pgh.pa.us
Recently-introduced code in reconstruct.c was using "unsigned"
to store the result of read(), pg_pread(), or write(). This is
completely bogus: it breaks subsequent tests for the result being
negative, as we're being reminded of by a chorus of buildfarm
warnings. Switch to "int" as was doubtless intended. (There are
several other uses of "unsigned" in this file that also look poorly
chosen to me, but for now I'm just trying to clean up the buildfarm.)
A larger problem is that "int" is not necessarily wide enough to hold
the result: per POSIX, all these functions return ssize_t. In places
where the requested read or write length clearly fits in int, that's
academic. It may be academic anyway as long as we constrain
individual data files to 1GB, since even a readv or writev-like
operation would then not be responsible for transferring more than
1GB. Nonetheless it seems like trouble waiting to happen, so I made
a pass over readv and writev calls and fixed the result variables
where that seemed appropriate. We might want to think about changing
some of the fd.c functions to return ssize_t too, for future-proofing;
but I didn't tackle that here.
Discussion: https://postgr.es/m/1672202.1703441340@sss.pgh.pa.us
I don't think there's a real problem here, because if we reach
the loop over 'tles' then we will either find at least one
TimeLineHistoryEntry such that oldest_segno != 0, in which case
unsummarized_lsn will be initialized, or else unsummarized_tli
will remain 0 and an error will occur before unsummarized_lsn
is used for anything. But some compilers are complainining, as
reported on list by Nathan Bossart and off-list by Andrew Dunstan.
Discussion: http://postgr.es/m/20231223215147.GA69623@nathanxps13
e0b1ee17dc introduced optimization for matching B-tree scan keys required for
the directional scan. However, it incorrectly assumed that all keys required
for opposite direction scan are satisfied by _bt_first(). It has been
illustrated that with multiple scan keys over the same column, a lesser one
(according to the scan direction) could win leaving the other one unsatisfied.
Instead of relying on _bt_first() this commit introduces code that memorizes
whether there was at least one match on the page. If that's true we know that
keys required for opposite-direction scan are satisfied as soon as
corresponding values are not NULLs.
Also, this commit simplifies the description for the optimization of keys
required for the current direction scan. Now the flag used for this is named
continuescanPrechecked and means exactly that *continuescan flag is known
to be true for the last item on the page.
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzn0LeLcb1PdBnK0xisz8NpHkxRrMr3NWJ%2BKOK-WZ%2BQtTQ%40mail.gmail.com
Reviewed-by: Pavel Borisov
It's not necessary to keep the firstPage flag as a field of BTScanOpaqueData.
This commit makes it an argument of the _bt_readpage() function. We can easily
distinguish first-time and repeated calls (within the scan) of this function.
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzk4SOsw%2BtHuTFiz8U9Jqj-R77rYPkhWKODCBb1mdHACXA%40mail.gmail.com
Reviewed-by: Pavel Borisov
There are a lot of situations when we share the same pointer to a Bitmapset
structure across different places. In order to evade undesirable side effects
replace_relid() function should always return a copy.
Reported-by: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_wJthNtYBL%2BSsebpgF-5L2r5zFFk6xYbS0A78GKOTFHw%40mail.gmail.com
Reviewed-by: Richard Guo, Andres Freund, Ashutosh Bapat, Andrei Lepikhov
set_config_option() bails out early if it detects that the option to
be set is PGC_BACKEND or PGC_SU_BACKEND class and we're reading the
config file in a postmaster child; we don't want to apply any new
value in such a case. That's fine as far as it goes, but it fails
to consider the requirements of the pg_file_settings view: for that,
we need to check validity of the value even though we have no
intention to apply it. Because we didn't, even very silly values
for affected GUCs would be reported as valid by the view. There
are only half a dozen such GUCs, which perhaps explains why this
got overlooked for so long.
Fix by continuing when changeVal is false; this parallels the logic
in some other early-exit paths.
Also, the check added by commit 924bcf4f1 to prevent GUC changes in
parallel workers seems a few bricks shy of a load: it's evidently
assuming that ereport(elevel, ...) won't return. Make sure we
bail out if it does. The lack of trouble reports suggests that
this is only a latent bug, i.e. parallel workers don't actually
reach here with elevel < ERROR. (Per the code coverage report,
we never reach here at all in the regression suite.) But we clearly
don't want to risk proceeding if that does happen.
Per report from Rıdvan Korkmaz. These are ancient bugs, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/2089235.1703617353@sss.pgh.pa.us
Self-join removal appears to be safe to apply with placeholder variables
as long as we handle PlaceHolderVar in replace_varno_walker() and replace
relid in phinfo->ph_lateral.
Discussion: https://postgr.es/m/18187-831da249cbd2ff8e%40postgresql.org
Author: Richard Guo
Reviewed-by: Andrei Lepikhov
This commit also retires sje_walker. This increases the generalty of replacing
varno in the parse tree and simplifies the code.
Discussion: https://postgr.es/m/18187-831da249cbd2ff8e%40postgresql.org
Author: Richard Guo
Reviewed-by: Andrei Lepikhov
Bhis commit introduces enhancements to the pg_stat_checkpointer view by adding
three new columns: restartpoints_timed, restartpoints_req, and
restartpoints_done. These additions aim to improve the visibility and
monitoring of restartpoint processes on replicas.
Previously, it was challenging to differentiate between successful and failed
restartpoint requests. This limitation arises because restartpoints on replicas
are dependent on checkpoint records from the primary, and cannot occur more
frequently than these checkpoints.
The new columns allow for clear distinction and tracking of restartpoint
requests, their triggers, and successful completions. This enhancement aids
database administrators and developers in better understanding and diagnosing
issues related to restartpoint behavior, particularly in scenarios where
restartpoint requests may fail.
System catalog is changed. Catversion is bumped.
Discussion: https://postgr.es/m/99b2ccd1-a77a-962a-0837-191cdf56c2b9%40inbox.ru
Author: Anton A. Melnikov
Reviewed-by: Kyotaro Horiguchi, Alexander Korotkov
When a column is dropped, the fields attacl, attoptions, and
attfdwoptions were kept unchanged. This is probably harmless, but it
seems wasteful, and leaves potentially dangling data lying around (for
example, attacl could contain references to users that are later also
dropped).
Change this to set those fields to null when a column is marked as
dropped.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/249d819d-1763-4580-8110-0bf91a0f08b7@eisentraut.org
This is necessary when spgcanreturn() is invoked on a partitioned
index, and the failure might be reachable in other scenarios as
well. The rest of what spgGetCache() does is perfectly sensible
for a partitioned index, so we should allow it to go through.
I think the main takeaway from this is that we lack sufficient test
coverage for non-btree partitioned indexes. Therefore, I added
simple test cases for brin and gin as well as spgist (hash and
gist AMs were covered already in indexing.sql).
Per bug #18256 from Alexander Lakhin. Although the known test case
only fails since v16 (3c569049b), I've got no faith at all that there
aren't other ways to reach this problem; so back-patch to all
supported branches.
Discussion: https://postgr.es/m/18256-0b0e1b6e4a620f1b@postgresql.org
Fix a bug during MERGE if a cross-partition update is attempted on a
partitioned table with a BEFORE DELETE ROW trigger that returns NULL,
to prevent the update. This would cause an error to be thrown, or an
assert failure in an assert-enabled build.
This was an oversight in 9321c79c86, which failed to properly
distinguish a DELETE prevented by a trigger from one prevented by a
concurrent update. Fix by having ExecDelete() return the TM_Result
status to ExecCrossPartitionUpdate(), so that it can distinguish the
two cases, and make ExecCrossPartitionUpdate() return the TM_Result
status to ExecUpdateAct(), so that it can return the correct status
from a concurrent update.
In addition, ensure that the command tag is correctly updated by
having ExecMergeMatched() pass canSetTag to ExecUpdateAct(), rather
than passing false, so that it updates the command tag if it does a
cross-partition update, making this code path in ExecMergeMatched()
consistent with ExecUpdate().
Per bug #18238 from Alexander Lakhin. Back-patch to v15, where MERGE
was introduced.
Dean Rasheed, reviewed by Richard Guo and Jian He.
Discussion: https://postgr.es/m/18238-2f2bdc7f720180b9%40postgresql.org
Commit 6af179395 added isCatalogRel field to some WAL record types,
but this field was not shown in the rmgr descriptions. This commit
changes the several rmgr descriptions to display the isCatalogRel
field.
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/957dc8f9-2a02-4640-9c01-9dcbf97c4187%40gmail.com
To take an incremental backup, you use the new replication command
UPLOAD_MANIFEST to upload the manifest for the prior backup. This
prior backup could either be a full backup or another incremental
backup. You then use BASE_BACKUP with the INCREMENTAL option to take
the backup. pg_basebackup now has an --incremental=PATH_TO_MANIFEST
option to trigger this behavior.
An incremental backup is like a regular full backup except that
some relation files are replaced with files with names like
INCREMENTAL.${ORIGINAL_NAME}, and the backup_label file contains
additional lines identifying it as an incremental backup. The new
pg_combinebackup tool can be used to reconstruct a data directory
from a full backup and a series of incremental backups.
Patch by me. Reviewed by Matthias van de Meent, Dilip Kumar, Jakub
Wartak, Peter Eisentraut, and Álvaro Herrera. Thanks especially to
Jakub for incredibly helpful and extensive testing.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
When active, this process writes WAL summary files to
$PGDATA/pg_wal/summaries. Each summary file contains information for a
certain range of LSNs on a certain TLI. For each relation, it stores a
"limit block" which is 0 if a relation is created or destroyed within
a certain range of WAL records, or otherwise the shortest length to
which the relation was truncated during that range of WAL records, or
otherwise InvalidBlockNumber. In addition, it stores a list of blocks
which have been modified during that range of WAL records, but
excluding blocks which were removed by truncation after they were
modified and never subsequently modified again.
In other words, it tells us which blocks need to copied in case of an
incremental backup covering that range of WAL records. But this
doesn't yet add the capability to actually perform an incremental
backup; the next patch will do that.
A new parameter summarize_wal enables or disables this new background
process. The background process also automatically deletes summary
files that are older than wal_summarize_keep_time, if that parameter
has a non-zero value and the summarizer is configured to run.
Patch by me, with some design help from Dilip Kumar and Andres Freund.
Reviewed by Matthias van de Meent, Dilip Kumar, Jakub Wartak, Peter
Eisentraut, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
First, mark the xlblocks member with InvalidXLogRecPtr, then issue a
write barrier, then initialize it. That ensures that the xlblocks
member doesn't appear valid while the contents are being initialized.
In preparation for reading WAL buffer contents without a lock.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACVfFMfqD5oLzZSQQZWfXiJqd-NdX0_317veP6FuB31QWA@mail.gmail.com
Reviewed-by: Andres Freund
This commit removes all the scripts located in src/tools/msvc/ to build
PostgreSQL with Visual Studio on Windows, meson becoming the recommended
way to achieve that. The scripts held some information that is still
relevant with meson, information kept and moved to better locations.
Comments that referred directly to the scripts are removed.
All the documentation still relevant that was in install-windows.sgml
has been moved to installation.sgml under a new subsection for Visual.
All the content specific to the scripts is removed. Some adjustments
for the documentation are planned in a follow-up set of changes.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://postgr.es/m/ZQzp_VMJcerM1Cs_@paquier.xyz
It's at least theoretically possible to overflow int32 when adding up
column width estimates to make a row width estimate. (The bug example
isn't terribly convincing as a real use-case, but perhaps wide joins
would provide a more plausible route to trouble.) This'd lead to
assertion failures or silly planner behavior. To forestall it, make
the relevant functions compute their running sums in int64 arithmetic
and then clamp to int32 range at the end. We can reasonably assume
that MaxAllocSize is a hard limit on actual tuple width, so clamping
to that is simply a correction for dubious input values, and there's
no need to go as far as widening width variables to int64 everywhere.
Per bug #18247 from RekGRpth. There've been no reports of this issue
arising in practical cases, so I feel no need to back-patch.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/18247-11ac477f02954422@postgresql.org
- Remove MemoryContextAllocZeroAligned(). It was supposed to be a
faster version of MemoryContextAllocZero(), but modern compilers turn
the MemSetLoop() into a call to memset() anyway, making it more or
less identical to MemoryContextAllocZero(). That was the only user of
MemSetTest, MemSetLoop, so remove those too, as well as palloc0fast().
- Convert newNode() to a static inline function. When this was
originally originally written, it was written as a macro because
testing showed that gcc didn't inline the size check as we
intended. Modern compiler versions do, and now that it just calls
palloc0() there is no size-check to inline anyway.
One nice effect is that the palloc0() takes one less argument than
MemoryContextAllocZeroAligned(), which saves a few instructions in the
callers of newNode().
Reviewed-by: Peter Eisentraut, Tom Lane, John Naylor, Thomas Munro
Discussion: https://www.postgresql.org/message-id/b51f1fa7-7e6a-4ecc-936d-90a8a1659e7c@iki.fi
Currently, we give a misleading error if the user omits to pass the
required parameter 'proto_version' in SQL API
pg_logical_slot_get_changes() or during START_REPLICATION protocol
message. The error raised is as follows which indicates that the wrong
version is passed.
ERROR: client sent proto_version=0 but server only supports protocol 1 or higher
Author: Emre Hasegeli
Reviewed-by: Peter Smith, Amit Kapila
Discussion: https://postgr.es/m/CAE2gYzwdwtUbs-tPSV-QBwgTubiyGD2ZGsSnAVsDfAGGLDrGOA@mail.gmail.com
The value was double in the original implementation of this logic.
Commit da08a6598 pulled it out into a subroutine, but carelessly
declared the parameter as int when it should have been double.
On most platforms, the only ill effect would be to clamp the value
to be not more than INT_MAX, which would seldom be exceeded and
probably wouldn't change the estimates too much anyway. Nonetheless,
it's wrong and can cause complaints from ubsan.
While here, improve the comments and parameter names.
This is an ABI change in a globally exposed subroutine, so
back-patching would create some risk of breaking extensions.
The value of the fix doesn't seem high enough to warrant taking
that risk, so fix in HEAD only.
Per report from Alexander Lakhin.
Discussion: https://postgr.es/m/f5e15fe1-202d-1936-f47c-f0c69a936b72@gmail.com
Commit dc3f9bc549 mainly targeted the JSONTYPE_NUMERIC code path.
This commit applies similar optimizations (e.g., removing
unnecessary runtime calls to strlen() and palloc()) to nearby code.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20231208203708.GA4126315%40nathanxps13
smgrreadv() and smgrwritev() and their md.c implementations call
FileReadV() and FileWriteV(). A range of disk blocks beginning at
'blocknum' and extending for 'nblocks' can be scattered to or gathered
from multiple buffers with a single system call. The traditional
smgrread() and smgrwrite() functions are implemented in terms of the new
functions.
Later commits will introduce calls with nblocks > 1, but the following
behavioral changes can be seen already:
* After a short transfer we'll now retry until we eventually read 0
bytes (= EOF) or get ENOSPC, EDQUOT, EFBIG etc, where previously we
would infer the reason. Retrying is consistent with xlog.c's
treatment of large WAL writes, and arguably also xlog.c and fd.c's
treatment of EINTR. Arbitrary short returns for larger transfers have
been observed on several OSes, and might in theory also happen for
transient reasons with our own pg_p*v() fallback code.
* After unexpected EOF or -1, the error thrown now talks about
a range even for the single block case, eg "blocks 42..42".
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
Originally, this routine relied on track_io_timing to check if a time
interval for an I/O operation stored in pg_stat_io should be initialized
or not. However, the addition of WAL statistics to pg_stat_io requires
that the initialization happens when track_wal_io_timing is enabled,
which is dependent on the code path where the I/O operation happens.
Author: Nazir Bilal Yavuz
Discussion: https://postgr.es/m/CAN55FZ3AiQ+ZMxUuXnBpd0Rrh1YhwJ5FudkHg=JU0P+-W8T4Vg@mail.gmail.com
During the development that led to commit 357889eb17, for a time we
had the value LIMIT_OPTION_DEFAULT, which was mostly but not completely
removed later on, before commit. Complete the removal now.
Author: Zhang Mingli <avamingli@gmail.com>
Discussion: https://postgr.es/m/59d61a1a-3858-475a-964f-24468c97cc67@Spark
Previously smgrprefetch() could issue POSIX_FADV_WILLNEED advice for a
single block at a time. Add an nblocks argument so that we can do the
same for a range of blocks. This usually produces a single system call,
but might need to loop if it crosses a segment boundary. Initially it
is only called with nblocks == 1, but proposed patches will make wider
calls.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi> (earlier version)
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
In v16 and up (since commit afbfc0298), large object ownership
checking has been broken because object_ownercheck() didn't take care
of the discrepancy between our object-address representation of large
objects (classId == LargeObjectRelationId) and the catalog where their
ownership info is actually stored (LargeObjectMetadataRelationId).
This resulted in failures such as "unrecognized class ID: 2613"
when trying to update blob properties as a non-superuser.
Poking around for related bugs, I found that AlterObjectOwner_internal
would pass the wrong classId to the PostAlterHook in the no-op code
path where the large object already has the desired owner. Also,
recordExtObjInitPriv checked for the wrong classId; that bug is only
latent because the stanza is dead code anyway, but as long as we're
carrying it around it should be less wrong. These bugs are quite old.
In HEAD, we can reduce the scope for future bugs of this ilk by
changing AlterObjectOwner_internal's API to let the translation happen
inside that function, rather than requiring callers to know about it.
A more bulletproof fix, perhaps, would be to start using
LargeObjectMetadataRelationId as the dependency and object-address
classId for blobs. However that has substantial risk of breaking
third-party code; even within our own code, it'd create hassles
for pg_dump which would have to cope with a version-dependent
representation. For now, keep the status quo.
Discussion: https://postgr.es/m/2650449.1702497209@sss.pgh.pa.us
Dead tuples are ignored and are not marked as dead during recovery, as
it can lead to MVCC issues on a standby because its xmin may not match
with the primary. This information is tracked by a field called
"xactStartedInRecovery" in the transaction state data, switched on when
starting a transaction in recovery.
Unfortunately, this information was not correctly tracked when starting
a subtransaction, because the transaction state used for the
subtransaction did not update "xactStartedInRecovery" based on the state
of its parent. This would cause index scans done in subtransactions to
return inconsistent data, depending on how the xmin of the primary
and/or the standby evolved.
This is broken since the introduction of hot standby in efc16ea520, so
backpatch all the way down.
Author: Fei Changhong
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/tencent_C4D907A5093C071A029712E73B43C6512706@qq.com
Backpatch-through: 12
FileReadV() and FileWriteV() adapt pg_preadv() and pg_pwritev() for
fd.c's virtual file descriptors. The simple FileRead() and FileWrite()
functions are now implemented in terms of the vectored functions, to
avoid code duplication, and they are converted back to the corresponding
simple system calls further down (commit 15c9ac36). Later work will
make more interesting multi-iovec calls.
The traditional behavior of reporting a "fake" ENOSPC error is
simplified. It's now always set for non-failing writes, for the benefit
of callers that expect to log a meaningful "%m" if they determine that
the write was short. (Perhaps we should consider getting rid of that
expectation one day.)
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
OpenSSL will sometimes return SSL_ERROR_SYSCALL without having set
errno; this is apparently a reflection of recv(2)'s habit of not
setting errno when reporting EOF. Ensure that we treat such cases
the same as read EOF. Previously, we'd frequently report them like
"could not accept SSL connection: Success" which is confusing, or
worse report them with an unrelated errno left over from some
previous syscall.
To fix, ensure that errno is zeroed immediately before the call,
and report its value only when it's not zero afterwards; otherwise
report EOF.
For consistency, I've applied the same coding pattern in libpq's
pqsecure_raw_read(). Bare recv(2) shouldn't really return -1 without
setting errno, but in case it does we might as well cope.
Per report from Andres Freund. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20231208181451.deqnflwxqoehhxpe@awork3.anarazel.de
This removes the production json_encoding_clause_opt, instead merging
it into json_format_clause. Also remove the auxiliary
makeJsonEncoding() function.
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/202312071841.u2gueb5dsrbk%40alvherre.pgsql
This GUC was intended as a debugging help in the 9.0 area when hot
standby and streaming replication were being developped, able to offer
more information at LOG level rather than DEBUGn. There are more tools
available these days that are able to offer rather equivalent
information, like pg_waldump introduced in 9.3. It is not obvious how
this facility is useful these days, so let's remove it.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/ZXEXEAUVFrvpquSd@paquier.xyz
The apply worker needs to update the state of the subscription tables to
'READY' during the synchronization phase which requires locking the
corresponding subscription. The apply worker also waits for the
subscription tables to reach the 'SYNCDONE' state after holding the locks
on the subscription and the wait is done using WaitLatch. The 'SYNCDONE'
state is changed by tablesync workers again by locking the corresponding
subscription. Both the state updates use AccessShareLock mode to lock the
subscription, so they can't block each other. However, a backend can
simultaneously try to acquire a lock on the same subscription using
AccessExclusiveLock mode to alter the subscription. Now, the backend's
wait on a lock can sneak in between the apply worker and table sync worker
causing deadlock.
In other words, apply_worker waits for tablesync worker which waits for
backend, and backend waits for apply worker. This is not detected by the
deadlock detector because apply worker uses WaitLatch.
The fix is to release existing locks in apply worker before it starts to
wait for tablesync worker to change the state.
Reported-by: Tomas Vondra
Author: Shlok Kyal
Reviewed-by: Amit Kapila, Peter Smith
Backpatch-through: 12
Discussion: https://postgr.es/m/d291bb50-12c4-e8af-2af2-7bb9bb4d8e3e@enterprisedb.com
Remove comments that supposed that holding a pin was a useful interlock
for _bt_walk_left(). There are times when _bt_walk_left() doesn't hold
either a lock or a pin on any page, so clearly this can't be true.
_bt_walk_left() is even prepared to deal with concurrent deletion of
both the original page and any pages to its left.
Oversight in commit 2ed5b87f96.
This commit does the following:
* In datum_to_json_internal(), the call to IsValidJsonNumber() is
replaced with simplified validation code. This avoids an extra
call to strlen() in this path, and it avoids validating the
entire string (which is okay since we know we're dealing with a
numeric data type's output).
* In datum_to_json_internal(), the call to escape_json() in the
JSONTYPE_NUMERIC path is replaced with code that just surrounds
the string with quotes. In passing, some other nearby calls to
appendStringInfo() have been replaced with similar code to avoid
unnecessary calls to vsnprintf().
* In composite_to_json(), the length of the separator is now
determined at compile time to avoid unnecessary calls to
strlen().
On my machine, this speeds up a benchmark for the proposed COPY TO
(FORMAT json) command with many integers by upwards of 20%. There
are likely other code paths that could be given a similar
treatment, but that is left as a future exercise.
Reviewed-by: Jeff Davis, Tom Lane, David Rowley, John Naylor
Discussion: https://postgr.es/m/20231207231251.GB3359478%40nathanxps13
Teach _bt_binsrch (and related helper routines like _bt_search and
_bt_compare) about the initial positioning requirements of backward
scans. Routines like _bt_binsrch already know all about "nextkey"
searches, so it seems natural to teach them about "goback"/backward
searches, too. These concepts are closely related, and are much easier
to understand when discussed together.
Now that certain implementation details are hidden from _bt_first, it's
straightforward to add a new optimization: backward scans using the <
strategy now avoid extra leaf page accesses in certain "boundary cases".
Consider the following example, which uses the tenk1 table (and its
tenk1_hundred index) from the standard regression tests:
SELECT * FROM tenk1 WHERE hundred < 12 ORDER BY hundred DESC LIMIT 1;
Before this commit, nbtree would scan two leaf pages, even though it was
only really necessary to scan one leaf page. We'll now descend straight
to the leaf page containing a (12, -inf) high key instead. The scan
will locate matching non-pivot tuples with "hundred" values starting
from the value 11. The scan won't waste a page access on the right
sibling leaf page, which cannot possibly contain any matching tuples.
You can think of the optimization added by this commit as disabling an
optimization (the _bt_compare "!pivotsearch" behavior that was added to
Postgres 12 in commit dd299df8) for a small subset of cases where it was
always counterproductive.
Equivalently, you can think of the new optimization as extending the
"pivotsearch" behavior that page deletion by VACUUM has long required
(since the aforementioned Postgres 12 commit went in) to other, similar
cases. Obviously, this isn't strictly necessary for these new cases
(unlike VACUUM, _bt_first is prepared to move the scan to the left once
on the leaf level), but the underlying principle is the same.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=XPzM8HzaLPq278Vms420mVSHfgs9wi5tjFKHcapZCEw@mail.gmail.com
Allow using multiple worker processes to build BRIN index, which until
now was supported only for BTREE indexes. For large tables this often
results in significant speedup when the build is CPU-bound.
The work is split in a simple way - each worker builds BRIN summaries on
a subset of the table, determined by the regular parallel scan used to
read the data, and feeds them into a shared tuplesort which sorts them
by blkno (start of the range). The leader then reads this sorted stream
of ranges, merges duplicates (which may happen if the parallel scan does
not align with BRIN pages_per_range), and adds the resulting ranges into
the index.
The number of duplicate results produced by workers (requiring merging
in the leader process) should be fairly small, thanks to how parallel
scans assign chunks to workers. The likelihood of duplicate results may
increase for higher pages_per_range values, but then there are fewer
page ranges in total. In any case, we expect the merging to be much
cheaper than summarization, so this should be a win.
Most of the parallelism infrastructure is a simplified copy of the code
used by BTREE indexes, omitting the parts irrelevant for BRIN indexes
(e.g. uniqueness checks).
This also introduces a new index AM flag amcanbuildparallel, determining
whether to attempt to start parallel workers for the index build.
Original patch by me, with reviews and substantial reworks by Matthias
van de Meent, certainly enough to make him a co-author.
Author: Tomas Vondra, Matthias van de Meent
Reviewed-by: Matthias van de Meent
Discussion: https://postgr.es/m/c2ee7d69-ce17-43f2-d1a0-9811edbda6e6%40enterprisedb.com
When building BRIN indexes, the brinbuildCallback only advances to the
next page range when seeing a tuple that doesn't belong to the current
one. This means that the index may end up missing ranges at the end of
the table, if those pages do not contain any indexable tuples.
We tend not to have completely empty pages at the end of a relation, but
this also applies to partial indexes, where the tuples may simply not
match the index predicate. This results in inefficient scans using the
affected BRIN index - without the summaries, the page ranges have to be
read and processed, which consumes I/O and possibly also CPU time.
The existing code already added empty ranges for earlier parts of the
table, this commit makes sure we add them for the ranges at the end of
the table too.
Patch by Matthias van de Meent, with review/improvements by me.
Author: Matthias van de Meent
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/CAEze2WiMsPZg%3DxkvSF_jt4%3D69k6K7gz5B8V2wY3gCGZ%2B1BzCbQ%40mail.gmail.com
While checking if a record could fit in the circular WAL decoding
buffer, the coding from commit 3f1ce973 used arithmetic that could
overflow. 64 bit systems were unaffected for various technical reasons,
which probably explains the lack of problem reports. Likewise for 32
bit systems running known 32 bit kernels. The systems at risk of
problems appear to be 32 bit processes running on 64 bit kernels, with
unlucky placement in memory.
Per complaint from GCC -fsanitize=undefined -m32, while testing
variations of 039_end_of_wal.pl.
Back-patch to 15.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKH0oRPOX7DhiQ_b51sM8HqcPp2J3WA-Oen%3DdXog%2BAGGQ%40mail.gmail.com
tts_virtual_copyslot() contained an Assert that checked that the srcslot
contained <= attributes than the dstslot. This seems to be backwards as
if the srcslot contained fewer attributes then the dstslot could be left
with stale Datum values from the previously stored tuple. It might make
more sense to allow the source to contain additional attributes and only
copy the leading ones that also exist in the destination, however, that's
not what we're doing here.
Here we just remove the Assert from tts_virtual_copyslot() and add an
Assert to ExecCopySlot() to verify the attribute counts match. There
does not seem to be any places where the destination contains fewer
attributes, so instead of going to the trouble of making the code
properly handle this, let's just ensure the attribute counts match. If
this Assert fails then that will indicate that we do have cases that
require us to handle the srcslot with more attributes than the dstslot.
It seems better to only write this code if there's a genuine requirement
for it rather than write it now only to leave it untested.
Thanks to Andres Freund for helping with the analysis of this.
Discussion: https://postgr.es/m/CAApHDvpMAvBL0T+TRORquyx1iqFQKMVTXtqNocOw0Pa2uh1heg@mail.gmail.com
An invalid index is skipped when doing REINDEX CONCURRENTLY at table
level, with INDEX_CORRUPTED used as errcode. This is confusing,
because an invalid index could exist after an interruption. The errcode
is switched to OBJECT_NOT_IN_PREREQUISITE_STATE instead, as per a
suggestion from Andres Freund.
While on it, the error messages are reworded, and a hint is added,
telling how to rebuild an invalid index in this case. This has been
suggested by Noah Misch.
Discussion: https://postgr.es/m/20231118230958.4fm3fhk4ypshxopa@awork3.anarazel.de
The commit 29d0a77fa6 labelled binary_upgrade_logical_slot_has_caught_up()
as a non-strict function to allow providing a better error message to callers
in case the passed slot_name is NULL. On further discussion, it seems that
it is not helpful to have a different error message for NULL input in this
function, so this patch marks the function as strict.
This patch also removes the explicit permission check to use replication
slots as this function is invoked only by superusers and instead adds an
Assert.
Reported-by: Masahiko Sawada
Author: Hayato Kuroda
Reviewed-by: Vignesh C
Discussion: https://postgr.es/m/CAD21AoDSyiBKkMXBxN_gUayZZUCOgyHnG8Ge8rcPXNP3Tf6B4g@mail.gmail.com
A REINDEX CONCURRENTLY run on a table with no indexes would always pop
the topmost snapshot from the active snapshot stack, making the snapshot
handling inconsistent between the multiple-relation and single-relation
cases. This commit slightly changes the snapshot stack handling so as a
snapshot is popped only ReindexMultipleInternal() in this case after a
relation has been reindexed, fixing a problem where an event trigger
function may need a snapshot but does not have one. This also keeps the
places where PopActiveSnapshot() is called closer to each other.
While on it, this expands the existing tests to cover all the cases that
could be faced with REINDEX commands and such event triggers, for one or
more relations, with or without indexes.
This behavior is inconsistent since 5dc92b844e, but we've never had a
need for an active snapshot at the end of a REINDEX until now.
Thanks also to Jian He for the input.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/cb538743-484c-eb6a-a8c5-359980cd3a17@gmail.com
When preparing commit 98e675ed7a I accidentally forgot to run
pgindent, which did produce a diff. Fix by adding the required
whitespace per the koel buildfarm failure.
Commit 5a991ef869 accidentally reversed the order of the tuples
and fields parameters, making the error message incorrectly refer
to 3 tuples with 1 field when IDENTIFY_SYSTEM returns 1 tuple and
3 or 4 fields. Fix by changing the order of the parameters. This
also adds a comment describing why we check for < 3 when postgres
since 9.4 has been sending 4 fields.
Backpatch all the way since the bug is almost a decade old.
Author: Tomonari Katsumata <t.katsumata1122@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Bug: #18224
Backpatch-through: v12
Presently, pg_convert() allocates a new bytea and copies the result
regardless of whether any conversion actually happened. This
commit adjusts this function to return the source pointer as-is if
no conversion occurred. This optimization isn't expected to make a
tremendous difference, but it still seems worthwhile to avoid
unnecessary memory allocations.
Author: Yurii Rashkovskii
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/CA%2BRLCQyknBPSWXRBQGOi6aYEcdQ9RpH9Kch4GjoeY8dQ3D%2Bvhw%40mail.gmail.com
After commit fd5e8b440d, InitProcess() is called later in the
EXEC_BACKEND startup sequence, so it's enough to set the
am_autovacuum_[launcher|worker] variables at the same place as in the
!EXEC_BACKEND case.
This commit adds support for REINDEX in event triggers, making this
command react for the events ddl_command_start and ddl_command_end. The
indexes rebuilt are collected with the ReindexStmt emitted by the
caller, for the concurrent and non-concurrent paths.
Thanks to that, it is possible to know a full list of the indexes that a
single REINDEX command has worked on.
Author: Garrett Thornburg, Jian He
Reviewed-by: Jim Jones, Michael Paquier
Discussion: https://postgr.es/m/CAEEqfk5bm32G7sbhzHbES9WejD8O8DCEOaLkxoBP7HNWxjPpvg@mail.gmail.com
The order of process initialization steps is now more consistent
between !EXEC_BACKEND and EXEC_BACKEND modes. InitProcess() is called
at the same place in either mode. We can now also move the
AttachSharedMemoryStructs() call into InitProcess() itself. This
reduces the number of "#ifdef EXEC_BACKEND" blocks.
Reviewed-by: Tristan Partin, Andres Freund, Alexander Lakhin
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
The BackgroundWorker struct is now passed the same way as the Port
struct. Seems more consistent.
This makes it possible to move InitProcess later in SubPostmasterMain
(in next commit), as we no longer need to access shared memory to read
background worker entry.
Reviewed-by: Tristan Partin, Andres Freund, Alexander Lakhin
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
For clarity, have separate functions for *creating* the shared memory
and semaphores at postmaster or single-user backend startup, and
for *attaching* to existing shared memory structures in EXEC_BACKEND
case. CreateSharedMemoryAndSemaphores() is now called only at
postmaster startup, and a new AttachSharedMemoryStructs() function is
called at backend startup in EXEC_BACKEND mode.
Reviewed-by: Tristan Partin, Andres Freund
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
The padding bytes written to the backend params file were
uninitialized. That's harmless because we don't access the padding
bytes when we read the file back in, but Valgrind doesn't know
that. In any case, clear the padding bytes to make Valgrind happy.
Reported-by: Alexander Lakhin
Discussion: https://www.postgresql.org/message-id/014768ed-8b39-c44f-b07c-098c87b1644c@gmail.com
When creating a partitioned index, the partition key must be a subset
of the index's columns. But this currently doesn't check that the
collations between the partition key and the index definition match.
So you can construct a unique index that fails to enforce uniqueness.
(This would most likely involve a nondeterministic collation, so it
would have to be crafted explicitly and is not something that would
just happen by accident.)
This patch adds the required collation check. As a result, any
previously allowed unique index that has a collation mismatch would no
longer be allowed to be created.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/3327cb54-f7f1-413b-8fdb-7a9dceebb938%40eisentraut.org
Commit 861f86beea changed hash_xlog_squeeze_page() to start reading
the write buffer conditionally but forgot to initialize it leading to an
uninitialized access.
Reported-by: Alexander Lakhin
Author: Hayato Kuroda
Reviewed-by: Alexander Lakhin, Amit Kapila
Discussion: http://postgr.es/m/62ed1a9f-746a-8e86-904b-51b9b806a1d9@gmail.com
Commit 7389aad6 removed the notion of backends started from inside a
signal handler. A stray comment still referred to them, while
explaining the need for a call to set_stack_base(). That leads to the
question of whether we still need the call in !EXEC_BACKEND builds.
There doesn't seem to be much point in suppressing it now, as it doesn't
hurt and probably helps to measure the stack base from the exact same
place in EXEC_BACKEND and !EXEC_BACKEND builds.
Back-patch to 16.
Reported-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reported-by: Tristan Partin <tristan@neon.tech>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BEJHcevNGNOxVWxTNFbuB%3Dvjf4U68%2B85rAC_Sxvy2zEQ%40mail.gmail.com
InitAuxiliaryProcess() closely resembles InitProcess(), but it didn't
call InitLWLockAccess(). But because InitLWLockAccess() is a no-op
unless compiled with LWLOCK_STATS, and everything works even if it's
not called, the only consequence was that the stats were not printed
for aux processes.
This was an oversight in commit 1c6821be31, in version 9.5, so it is
missing in all supported branches. But since it only affects
developers using LWLOCK_STATS and no one has complained, no
backpatching.
Discussion: https://www.postgresql.org/message-id/20231130202648.7k6agmuizdilufnv@awork3.anarazel.de
It's not necessary to fill the key field in most cases, since
hash_search has already done that. Some existing call sites have an
assert or comment that this contract has been fulfilled, but those
are quite old and that practice seems unnecessary here.
While at it, remove a nearby redundant assignment that a smart compiler
will elide anyway.
Zhao Junwang, with some adjustments by me
Reviewed by Nathan Bossart, with additional feedback from Tom Lane
Discussion: http://postgr.es/m/CAEG8a3%2BUPF%3DR2QGPgJMF2mKh8xPd1H2TmfH77zPuVUFdBpiGUA%40mail.gmail.com
Quotes are applied to GUCs in a very inconsistent way across the code
base, with a mix of double quotes or no quotes used. This commit
removes double quotes around all the GUC names that are obviously
referred to as parameters with non-English words (use of underscore,
mixed case, etc).
This is the result of a discussion with Álvaro Herrera, Nathan Bossart,
Laurenz Albe, Peter Eisentraut, Tom Lane and Daniel Gustafsson.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w@mail.gmail.com
Switch from using TransactionId to FullTransactionId in naming of 2PC files.
Transaction state file in the pg_twophase directory now have extra 8 bytes in
the name to address an epoch of a given xid.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
This avoids the wraparound in async.c and removes the corresponding code
complexity. The maximum amount of allocated SLRU pages for NOTIFY / LISTEN
queue is now determined by the max_notify_queue_pages GUC. The default
value is 1048576. It allows to consume up to 8 GB of disk space which is
exactly the limit we had previously.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
We've had repeated bugs in the area of handling SLRU wraparound in the past,
some of which have caused data loss. Switching to an indexing system for SLRUs
that does not wrap around should allow us to get rid of a whole bunch
of problems and improve the overall reliability of the system.
This particular patch however only changes the indexing and doesn't address
the wraparound per se. This is going to be done in the following patches.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
Assigning a precedence to a keyword that isn't a kind of expression
operator is rather dangerous, because it might mask grammar
ambiguities that we'd rather know about. It's much safer to attach
explicit precedences to individual rules, which will affect the
behavior of only that one rule. Moreover, when we do have to give
a precedence to a non-operator keyword, we should try to give it the
same precedence as IDENT, thereby reducing the risk of surprising
side-effects.
Apply this hard-won knowledge to SET (which I misassigned ages ago
in commit 2647ad658) and some SQL/JSON-related productions
(from commits 6ee30209a, 71bfd1543).
Patch HEAD only, since there's no evidence of actual bugs here.
Discussion: https://postgr.es/m/CADT4RqBPdbsZW7HS1jJP319TMRHs1hzUiP=iRJYR6UqgHCrgNQ@mail.gmail.com
We should have done it this way all along, but we accidentally got
away with using the wrong BIO field up until OpenSSL 3.2. There,
the library's BIO routines that we rely on use the "data" field
for their own purposes, and our conflicting use causes assorted
weird behaviors up to and including core dumps when SSL connections
are attempted. Switch to using the approved field for the purpose,
i.e. app_data.
While at it, remove our configure probes for BIO_get_data as well
as the fallback implementation. BIO_{get,set}_app_data have been
there since long before any OpenSSL version that we still support,
even in the back branches.
Also, update src/test/ssl/t/001_ssltests.pl to allow for a minor
change in an error message spelling that evidently came in with 3.2.
Tristan Partin and Bo Andreson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAN55FZ1eDDYsYaL7mv+oSLUij2h_u6hvD4Qmv-7PK7jkji0uyQ@mail.gmail.com
If the tuple being updated is not visible to the crosscheck snapshot,
we return TM_Updated but the assertions would not hold in that case.
Move them to before the cross-check.
Fixes bug #17893. Backpatch to all supported versions.
Author: Alexander Lakhin
Backpatch-through: 12
Discussion: https://www.postgresql.org/message-id/17893-35847009eec517b5%40postgresql.org
00b41463c adjusted Bitmapset so that an empty set is always represented
as NULL. This makes checking for empty sets far cheaper than it used
to be.
There were various places in the code where we'd call bms_membership()
to handle the 3 possible BMS_Membership values. For the BMS_SINGLETON
case, we'd also call bms_singleton_member() to find the single set member.
This can now be done in a more optimal way by first checking if the set is
NULL and then not bothering with bms_membership() and simply call
bms_get_singleton_member() instead to find the single member. This
function will return false if there are multiple members in the set.
Here we also tidy up some logic in examine_variable() for the single
member case. There's now no need to call bms_is_member() as we've
already established that we're working with a singleton Bitmapset, so we
can just check if varRelid matches the singleton member.
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/CAApHDvqW+CxNPcY245GaWiuqkkqgTudtG2ncGvvSjGn2wdTZLA@mail.gmail.com
Fix a bug introduced by c1ec02be1d. It may happen that the executor
opens indexes on the result relation, but no rows end up being inserted.
Then the index_insert_cleanup still gets executed, but passes down NULL
to the AM callback. The AM callback may not expect this, as is the case
of brininsertcleanup, leading to a crash.
Fixed by only calling the cleanup callback if (ii_AmCache != NULL). This
way the AM can simply assume to only see a valid cache.
Reported-by: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-w9qC-o9hQox9UHvdVZAYTp8OrPQOKtwbvzWaRejTT=Q@mail.gmail.com
XLogSetAsyncXactLSN(), called at asynchronous commit, would wake up
walwriter every time the LSN advances, but walwriter doesn't actually
do anything unless it has at least 'wal_writer_flush_after' full
blocks of WAL to write. Repeatedly waking up walwriter to do nothing
is a waste of CPU cycles in both walwriter and the backends doing the
wakeups. To fix, apply the same logic in XLogSetAsyncXactLSN() to
decide whether to wake up walwriter, as walwriter uses to determine if
it has any work to do.
In the passing, rename misleadingly named 'flushbytes' local variable
to 'flushblocks'.
Author: Andres Freund, Heikki Linnakangas
Discussion: https://www.postgresql.org/message-id/20231024230929.vsc342baqs7kmbte@awork3.anarazel.de
52e4f0cd4 introduced a bug in pgoutput in which missing values in tuples
were incorrectly filled in with NULL. The problem was the use of
CreateTupleDescCopy where CreateTupleDescCopyConstr was required, as the
former drops the constraints in the tuple description (specifically, the
default value constraint) on the floor.
The bug could result in incorrectness when a table replicated via
`REPLICA IDENTITY FULL` underwent a schema change that added a column
with a default value. The problem is that in such cases updates fill NULL
values in old tuples for missing columns for default values. Then on the
subscriber, we failed to find a matching tuple and missed updating the
required row.
Author: Nikhil Benesch
Reviewed-by: Hou Zhijie, Amit Kapila
Backpatch-through: 15
Discussion: http://postgr.es/m/CAPWqQZTEpZQamYsGMn6ZDRvVywwpVPiKH6OY4KSgA+NmeqFNzA@mail.gmail.com
Values corresponding to STATISTIC_KIND_RANGE_LENGTH_HISTOGRAM and
STATISTIC_KIND_BOUNDS_HISTOGRAM were not exposed to pg_stats when these
slot kinds were introduced in 918eee0c49.
This commit adds the missing fields to pg_stats.
Catversion is bumped.
Discussion: https://postgr.es/m/flat/b67d8b57-9357-7e82-a2e7-f6ce6eaeec67@postgrespro.ru
Author: Egor Rogov, Soumyadeep Chakraborty
Reviewed-by: Tomas Vondra, Justin Pryzby, Jian He
The brininsert code used to initialize (and destroy) BrinDesc and
BrinRevmap for each tuple, which is not free. This patch initializes
these structures only once, and reuses them for all inserts in the same
command. The data is passed through indexInfo->ii_AmCache.
This also introduces an optional AM callback "aminsertcleanup" that
allows performing custom cleanup in case simply pfree-ing ii_AmCache is
not sufficient (which is the case when the cache contains TupleDesc,
Buffers, and so on).
Author: Soumyadeep Chakraborty
Reviewed-by: Alvaro Herrera, Matthias van de Meent, Tomas Vondra
Discussion: https://postgr.es/m/CAE-ML%2B9r2%3DaO1wwji1sBN9gvPz2xRAtFUGfnffpd0ZqyuzjamA%40mail.gmail.com
When using GSSAPI encryption in non-blocking mode, libpq sometimes
failed with "GSSAPI caller failed to retransmit all data needing
to be retried". The cause is that pqPutMsgEnd rounds its transmit
request down to an even multiple of 8K, and sometimes that can lead
to not requesting a write of data that was requested to be written
(but reported as not written) earlier. That can upset pg_GSS_write's
logic for dealing with not-yet-written data, since it's possible
the data in question had already been incorporated into an encrypted
packet that we weren't able to send during the previous call.
We could fix this with a one-or-two-line hack to disable pqPutMsgEnd's
round-down behavior, but that seems like making the caller work around
a behavior that pg_GSS_write shouldn't expose in this way. Instead,
adjust pg_GSS_write to never report a partial write: it either
reports a complete write, or reflects the failure of the lower-level
pqsecure_raw_write call. The requirement still exists for the caller
to present at least as much data as on the previous call, but with
the caller-visible write start point not moving there is no temptation
for it to present less. We lose some ability to reclaim buffer space
early, but I doubt that that will make much difference in practice.
This also gets rid of a rather dubious assumption that "any
interesting failure condition (from pqsecure_raw_write) will recur
on the next try". We've not seen failure reports traceable to that,
but I've never trusted it particularly and am glad to remove it.
Make the same adjustments to the equivalent backend routine
be_gssapi_write(). It is probable that there's no bug on the backend
side, since we don't have a notion of nonblock mode there; but we
should keep the logic the same to ease future maintenance.
Per bug #18210 from Lars Kanis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/18210-4c6d0b14627f2eb8@postgresql.org
A WaitEventSet holds file descriptors or event handles (on Windows).
If FreeWaitEventSet is not called, those fds or handles are leaked.
Use ResourceOwners to track WaitEventSets, to clean those up
automatically on error.
This was a live bug in async Append nodes, if a FDW's
ForeignAsyncRequest function failed. (In back branches, I will apply a
more localized fix for that based on PG_TRY-PG_FINALLY.)
The added test doesn't check for leaking resources, so it passed even
before this commit. But at least it covers the code path.
In the passing, fix misleading comment on what the 'nevents' argument
to WaitEventSetWait means.
Report by Alexander Lakhin, analysis and suggestion for the fix by
Tom Lane. Fixes bug #17828.
Reviewed-by: Alexander Lakhin, Thomas Munro
Discussion: https://www.postgresql.org/message-id/472235.1678387869@sss.pgh.pa.us
The copy command formed for initial sync was using parenthesis for tables
with no columns leading to syntax error. This patch avoids adding
parenthesis for such tables.
Reported-by: Justin G
Author: Vignesh C
Reviewed-by: Peter Smith, Amit Kapila
Backpatch-through: 15
Discussion: http://postgr.es/m/18203-df37fe354b626670@postgresql.org
In replorigin_session_setup(), we were needlessly looping for
max_replication_slots even after finding an existing slot for the origin.
This shouldn't hurt us much except for probably large values of
max_replication_slots.
Author: Antonin Houska
Discussion: http://postgr.es/m/2694.1700471273@antos
This refactoring reduces the code in charge of creating replication
slots from two "if" block to a single one, making it slightly cleaner.
This change is possible since 1d04a59be3, that has removed the
intermediate code that existed between the two "if" blocks in charge of
initializing the output message buffer.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+PtnJzqKT41Zt8pChRzba=QgCqjtfYvcf84NMj3VFJoKfw@mail.gmail.com
This commit log messages (at LOG level when log_replication_commands is
set, otherwise at DEBUG1 level) when walsenders acquire and release
replication slots. These messages help to know the lifetime of a
replication slot - one can know how long a streaming standby, logical
subscriber, or replication slot consumer is down. These messages will be
useful on production servers to debug and analyze inactive replication
slots.
Note that these messages are emitted only for walsenders but not for
backends. This is because walsenders are the ones that typically hold
replication slots for longer durations, unlike backends which hold them
for executing replication related functions.
Author: Bharath Rupireddy
Reviewed-by: Peter Smith, Amit Kapila, Alvaro Herrera
Discussion: http://postgr.es/m/CALj2ACX17G7F-jeLt+7KhJ6YxVeRwR8Zk0rDh4VnT546o0UpTQ@mail.gmail.com
Recent commit f26c2368dc introduced a search_path cache, but left some
potential out-of-memory hazards. Simplify the code and make it safer
against OOM.
This change reintroduces one list_copy(), losing a small amount of the
performance gained in f26c2368dc. A future change may optimize away
the list_copy() again if it can be done in a safer way.
Discussion: https://postgr.es/m/e6fded24cb8a2c53d4ef069d9f69cc7baaafe9ef.camel@j-davis.com
As coded, the start block calculated by BufFileAppend() would overflow
once more than 16k files are used with a default block size. This issue
existed before b1e5c9fa9a, but there's no reason not to be clean about
it.
Per report from Coverity, with a fix suggested by Tom Lane.
The DROP STATISTICS code failed to properly lock the table, leading to
ERROR: tuple concurrently deleted
when executed concurrently with ANALYZE.
Fixed by modifying RemoveStatisticsById() to acquire the same lock as
ANALYZE. This function is called only by DROP STATISTICS, as ANALYZE
calls RemoveStatisticsDataById() directly.
Reported by Justin Pryzby, fix by me. Backpatch through 12. The code was
like this since it was introduced in 10, but older releases are EOL.
Reported-by: Justin Pryzby
Reviewed-by: Tom Lane
Backpatch-through: 12
Discussion: https://postgr.es/m/ZUuk-8CfbYeq6g_u@pryzbyj2023
Commits 146604ec43 and a898b409f6 added overflow checks to
interval_mul(), but not to interval_div(), which contains almost
identical code, and so is susceptible to the same kinds of
overflows. In addition, those checks did not catch all possible
overflow conditions.
Add additional checks to the "cascade down" code in interval_mul(),
and copy all the overflow checks over to the corresponding code in
interval_div(), so that they both generate "interval out of range"
errors, rather than returning bogus results.
Given that these errors are relatively easy to hit, back-patch to all
supported branches.
Per bug #18200 from Alexander Lakhin, and subsequent investigation.
Discussion: https://postgr.es/m/18200-5ea288c7b2d504b1%40postgresql.org
When there are no indexes on a table, we vacuum each heap block after
pruning it and then update the freespace map. Periodically, we also
vacuum the freespace map. This was done while unnecessarily holding a
lock on the heap page. Release the lock before calling
FreeSpaceMapVacuumRange() and, while we're at it, ensure the range
includes the heap block we just vacuumed.
There are no known deadlocks or other similar issues, therefore don't
backpatch. It's certainly not good to do all this work under a lock, but it's
not frequently reached, making it not worth the risk of backpatching.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAAKRu_YiL%3D44GvGnt1dpYouDSSoV7wzxVoXs8m3p311rp-TVQQ%40mail.gmail.com
examine_simple_variable() left this as an unimplemented case years
ago, with the result that plans for queries involving un-flattened
CTEs might be much stupider than necessary. It's not hard to extend
the existing logic for RTE_SUBQUERY cases to also be able to drill
down into CTEs, so let's do that.
There was some discussion of whether this patch breaks the idea
of a MATERIALIZED CTE being an optimization fence. We concluded
it's okay, because we already allow the outer planner level to
see the estimated width and rowcount of the CTE result, and
letting it see column statistics too seems fairly equivalent.
Basically, what we expect of the optimization fence is that the
outer query should not affect the plan chosen for the CTE query.
Once that plan is chosen, it's okay for the outer planner level
to make use of whatever information we have about it.
Jian Guo and Tom Lane, per complaint from Hans Buschmann
Discussion: https://postgr.es/m/4504e67078d648cdac3651b2960da6e7@nidsa.net
A few places in array_in() and plperl would report a misleading value
(always MAXDIM+1) for the number of dimensions in the input, because
we'd error out as soon as that was clearly too large rather than
scanning the entire input. There doesn't seem to be much value in
offering the true number, at least not enough to justify the extra
complication involved in trying to get it. So just remove that
parenthetical remark. We already have other places that do it
like that, anyway.
Per suggestions from Alexander Lakhin and Heikki Linnakangas.
Discussion: https://postgr.es/m/2794005.1683042087@sss.pgh.pa.us
The code previously relied on "long" as type to track block numbers,
which would be 4 bytes in all Windows builds or any 32-bit builds. This
limited the code to be able to handle up to 16TB of data with the
default block size of 8kB, like during a CLUSTER. This code now relies
on a more portable int64, which should be more than enough for at least
the next 20 years to come.
This issue has been reported back in 2017, but nothing was done about it
back then, so here we go now.
Reported-by: Peter Geoghegan
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/CAH2-WznCscXnWmnj=STC0aSa7QG+BRedDnZsP=Jo_R9GUZvUrg@mail.gmail.com
This routine has been marked as NOT_USED since 20ad43b576 from 2000,
and a patch is planned to switch the logtape/tuplestore APIs to rely on
int64 rather than long for the block nunbers, which is more portable.
Keeping it is more confusing than anything at this stage, so let's get
rid of it entirely.
Thanks for Heikki Linnakangas for the poke on this one.
Discussion: https://postgr.es/m/5047be8c-7ee6-4dd5-af76-6c916c3103b4@iki.fi
contain_mutable_functions and contain_volatile_functions give
reliable answers only after expression preprocessing (specifically
eval_const_expressions). Some places understand this, but some did
not get the memo --- which is not entirely their fault, because the
problem is documented only in places far away from those functions.
Introduce wrapper functions that allow doing the right thing easily,
and add commentary in hopes of preventing future mistakes from
copy-and-paste of code that's only conditionally safe.
Two actual bugs of this ilk are fixed here. We failed to preprocess
column GENERATED expressions before checking mutability, so that the
code could fail to detect the use of a volatile function
default-argument expression, or it could reject a polymorphic function
that is actually immutable on the datatype of interest. Likewise,
column DEFAULT expressions weren't preprocessed before determining if
it's safe to apply the attmissingval mechanism. A false negative
would just result in an unnecessary table rewrite, but a false
positive could allow the attmissingval mechanism to be used in a case
where it should not be, resulting in unexpected initial values in a
new column.
In passing, re-order the steps in ComputePartitionAttrs so that its
checks for invalid column references are done before applying
expression_planner, rather than after. The previous coding would
not complain if a partition expression contains a disallowed column
reference that gets optimized away by constant folding, which seems
to me to be a behavior we do not want.
Per bug #18097 from Jim Keener. Back-patch to all supported versions.
Discussion: https://postgr.es/m/18097-ebb179674f22932f@postgresql.org
Currently, pg_stat_reset_shared() cannot reset the counters in the view
pg_stat_slru even if it is a type of shared stats. This patch adds
support for a new value in pg_stat_reset_shared(), called "slru", able
to do that. Note that pg_stat_reset_shared(NULL) also resets SLRU
counters.
There may be a point in removing pg_stat_reset_slru() that was
introduced in 28cac71bd3 (v13~) as the new option overlaps with this
function, but we would lose the ability to reset individual SLRU
counters. This is left for future reconsideration.
Author: Atsushi Torikoshi
Discussion: https://postgr.es/m/e3c25d72e81378e7b64f3c52e0306fc9@oss.nttdata.com
As of commit eaa5808e8e, MemoryContextResetAndDeleteChildren() is
just a backwards compatibility macro for MemoryContextReset(). Now
that some time has passed, this macro seems more likely to create
confusion.
This commit removes the macro and replaces all remaining uses with
calls to MemoryContextReset(). Any third-party code that use this
macro will need to be adjusted to call MemoryContextReset()
instead. Since the two have behaved the same way since v9.5, such
adjustments won't produce any behavior changes for all
currently-supported versions of PostgreSQL.
Reviewed-by: Amul Sul, Tom Lane, Alvaro Herrera, Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/20231113185950.GA1668018%40nathanxps13
Alexander reported a crash with repeated create + drop database, after
the ResourceOwner rewrite (commit b8bff07daa). That was fixed by the
previous commit, but it nevertheless seems like a good idea clear
CurrentResourceOwner earlier, because you're not supposed to use it
for anything after we start releasing it.
Reviewed-by: Alexander Lakhin
Discussion: https://www.postgresql.org/message-id/11b70743-c5f3-3910-8e5b-dd6c115ff829%40gmail.com
The comments in dsa.c suggested that areas were owned by resource
owners, but it was not in fact tracked explicitly. The DSM attachments
held by the dsa were owned by resource owners, but not the area
itself. That led to confusion if you used one resource owner to
attach or create the area, but then switched to a different resource
owner before allocating or even just accessing the allocations in the
area with dsa_get_address(). The additional DSM segments associated
with the area would get owned by a different resource owner than the
initial segment. To fix, add an explicit 'resowner' field to
dsa_area. It replaces the 'mapping_pinned' flag; resowner == NULL now
indicates that the mapping is pinned.
This is arguably a bug fix, but I'm not backpatching because it
doesn't seem to be a live bug in the back branches. In 'master', it is
a bug because commit b8bff07daa made ResourceOwners more strict so
that you are no longer allowed to remember new resources in a
ResourceOwner after you have started to release it. Merely accessing a
dsa pointer might need to attach a new DSM segment, and before this
commit it was temporarily remembered in the current owner for a very
brief period even if the DSA was pinned. And that could happen in
AtEOXact_PgStat(), which is called after the owner is already released.
Reported-by: Alexander Lakhin
Reviewed-by: Alexander Lakhin, Thomas Munro, Andres Freund
Discussion: https://www.postgresql.org/message-id/11b70743-c5f3-3910-8e5b-dd6c115ff829%40gmail.com
When search_path is changed to something that was previously set, and
no invalidation happened in between, use the cached list of namespace
OIDs rather than recomputing them. This avoids syscache lookups and
ACL checks.
Important when the search_path changes frequently, such as when set in
proconfig.
An earlier version of this patch was reviewd by Nathan Bossart. This
version simplifies a few things and is safer in case of OOM.
Discussion: https://www.postgresql.org/message-id/abf4ce8804e0e05dff8c1725ae6a8ed28b7d66e0.camel%40j-davis.com
Reviewed-by: Nathan Bossart
Previously, it thought that any plain file located under global, base,
or a tablespace directory had checksums unless it was in a short list
of excluded files. Now, it thinks that files in those directories have
checksums if parse_filename_for_nontemp_relation says that they are
relation files. (Temporary relation files don't matter because they're
excluded from the backup anyway.)
This changes the behavior if you have stray files not managed by
PostgreSQL in the relevant directories. Previously, you'd get some
kind of checksum-related complaint if such files existed, assuming
that the cluster had checksums enabled and that the base backup
wasn't run with NOVERIFY_CHECKSUMS. Now, you won't get those
complaints any more. That seems like an improvement to me, because
those files were presumably not created by PostgreSQL and so there
is no reason to think that they would be checksummed like a
PostgreSQL relation file. (If we want to complain about such files,
we should complain about them existing at all, not just about their
checksums.)
The point of this change is to make the code more consistent.
sendDir() was already calling parse_filename_for_nontemp_relation()
as part of an effort to determine which files to include in the
backup. So, it already had the information about whether a certain
file was a relation file. sendFile() then used a separate method,
embodied in is_checksummed_file(), to make what is essentially
the same determination. It's better not to make the same decision
using two different methods, especially in closely-related code.
Patch by me. Reviewed by Dilip Kumar and Álvaro Herrera. Thanks
also to Jakub Wartak and Peter Eisentraut for comments, suggestions,
and testing on the larger patch set of which this is a part.
Discussion: http://postgr.es/m/CAFiTN-snhaKkWhi2Gz5i3cZeKefun6sYL==wBoqqnTXxX4_mFA@mail.gmail.com
Discussion: http://postgr.es/m/202311141312.u4qx5gtpvfq3@alvherre.pgsql
This adds support for infinity to the interval data type, using the
same input/output representation as the other date/time data types
that support infinity. This allows various arithmetic operations on
infinite dates, timestamps and intervals.
The new values are represented by setting all fields of the interval
to INT32/64_MIN for -infinity, and INT32/64_MAX for +infinity. This
ensures that they compare as less/greater than all other interval
values, without the need for any special-case comparison code.
Note that, since those 2 values were formerly accepted as legal finite
intervals, pg_upgrade and dump/restore from an old database will turn
them from finite to infinite intervals. That seems OK, since those
exact values should be extremely rare in practice, and they are
outside the documented range supported by the interval type, which
gives us a certain amount of leeway.
Bump catalog version.
Joseph Koshakow, Jian He, and Ashutosh Bapat, reviewed by me.
Discussion: https://postgr.es/m/CAAvxfHea4%2BsPybKK7agDYOMo9N-Z3J6ZXf3BOM79pFsFNcRjwA%40mail.gmail.com
To generate a dummy probes.h file when dtrace is not available, we had
two different scripts: A sed version, which is the original version,
and a Perl version, which was generated by s2p. This split was
necessary because Perl was not a mandatory build dependency on Unix,
but sed was not guaranteed to be available on Windows.
(The Meson build system used the sed version even on Windows, which
was probably incorrect and probably would have had to be fixed before
elevating that build system from experimental status.)
As of 721856ff24, Perl is a required build dependency, so this split
is no longer necessary. We can just use the Perl script in all build
environments and remove a whole bunch of infrastructure to keep the
two variants in sync.
The new Gen_dummy_probes.pl is not the version generated by s2p but a
new implementation written by hand by adapting the sed version to Perl
syntax.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/3fd0f1bc-4483-4ba9-8aa0-64765b052039@eisentraut.org
pg_stat_reset_slru currently requires an input argument, either:
- NULL to reset the SLRU counters of everything.
- A specific value to reset a single SLRU cache.
This commit adds support for a new pattern: pg_stat_reset_slru without
any argument works the same way as pg_stat_reset_slru(NULL), relying on
a DEFAULT in the function definition to handle this case. This makes
the function more consistent with 23c8c0c8f4.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Atsushi Torikoshi
Discussion: https://postgr.es/m/CALj2ACW1VizYg01EeH_cA-7qA+4NzWVAoZ5Lw9_XYO1RRHAZbA@mail.gmail.com
Rewrite array_in() and its subroutines so that we make only one
pass over the input text, rather than two. This requires
potentially re-pallocing the working arrays values[] and nulls[]
larger than our initial guess, but that cost will hopefully be made
up by avoiding duplicate parsing. In any case this coding seems
much clearer and more straightforward than what we had before.
This also fixes array_in() to reject non-rectangular input (that is,
different brace depths in different parts of the input) more reliably
than before, and to give a better error message when it does so.
This is analogous to the plpython and plperl fixes in 0553528e7 and
f47004add. Like those PLs, we now accept input such as '{{},{}}'
as a valid representation of an empty array, which we did not before.
Additionally, reject explicit array subscripts that are outside the
integer range (previously you just got whatever atoi() converted
them to), and make some other minor improvements in error reporting.
Although this is arguably a bug fix, it's also a behavioral change
that might trip somebody up, so no back-patch.
Tom Lane, Heikki Linnakangas, and Jian He. Thanks to Alexander Lakhin
for the initial report and for review/testing.
Discussion: https://postgr.es/m/2794005.1683042087@sss.pgh.pa.us
It's clearly stated in the comments that ginFindParents() must keep
the pin on the index's root page that's associated with the topmost
GinBtreeStack item. However, the code path for the case that the
desired downlink has been pushed down to the next index level
ignored this proviso, and would release the pin anyway if we were
still examining the root level. That led to an assertion failure
or "buffer NNNN is not owned by resource owner" error later, when
we try to release the pin again at the end of the insertion.
This is quite hard to reproduce, since it can only happen if an
index root page split occurs concurrently with our own insertion.
Thanks to Jeff Janes for finding a test case that triggers it
often enough to allow investigation.
This has been there since the beginning of GIN, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAMkU=1yCAKtv86dMrD__Ja-7KzjE=uMeKX8y__cx5W-OEWy2ow@mail.gmail.com
Commit b7eda3e0e moved XidInMVCCSnapshot() from tqual.c into snapmgr.c,
but follow-up commit c91560def incorrectly updated this reference. We
could fix it, but as pointed out by Daniel Gustafsson, 1) the reader can
easily find the file that contains the definition of that function, e.g.
by grepping, and 2) this kind of reference is prone to going stale; so
let's just remove it.
Back-patch to all supported branches.
Reviewed by Daniel Gustafsson.
Discussion: https://postgr.es/m/CAPmGK145VdKkPBLWS2urwhgsfidbSexwY-9zCL6xSUJH%2BBTUUg%40mail.gmail.com
Commit 00d7fb5e2e started to use REGBUF_NO_CHANGE at a few places in the
code where we register the buffer before marking it dirty but missed
updating one of the code flows in the hash index where we free the overflow
page without any live tuples on it.
Author: Amit Kapila and Hayato Kuroda
Discussion: http://postgr.es/m/f045c8f7-ee24-ead6-3679-c04a43d21351@gmail.com
sendFileWithContent() previously got the content length by using
strlen(), assuming that the content given is always a string. Some
patches are under discussion to pass binary contents to a base backup
stream, where an arbitrary length needs to be given by the caller
instead.
The patch extends sendFileWithContent() to be able to handle this case,
where len < 0 can be used to indicate an arbitrary length rather than
rely on strlen() for the content length.
A comment in sendFileWithContent() mentioned the backup_label file.
However, this routine is used by more file types, like the tablespace
map, so adjust it in passing.
Author: David Steele
Discussion: https://postgr.es/m/2daf8adc-8db7-4204-a7f2-a7e94e2bfa4b@pgmasters.net
Currently, pg_stat_reset_shared() can use an argument to specify the
target of statistics to reset, doing nothing for NULL as it is strict.
This patch adds to pg_stat_reset_shared() the possibility to reset all
the stats types already handled in this function rather than do nothing
if the argument value given is NULL or if nothing is specified
(proisstrict is switched to false). Like previously, SLRUs are not
included in what gets reset.
The idea to use NULL or no argument to control if all the shared stats
already covered by this function should be reset has been proposed by
Andres Freund.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy,
Matthias van de Meent
Discussion: https://postgr.es/m/4291a55137ddda77cf7cc5f46e846daf@oss.nttdata.com
It seems that a PHV evaluated/needed at or below the self join should not have
a problem if we remove the self join. But this requires further investigation.
For now, we just do not remove self joins if the rel to be removed is laterally
referenced by PHVs.
Discussion: https://postgr.es/m/CAMbWs4-ns73VF9gi37q61G3dS6Xuos+HtryMaBh37WQn=BsaJw@mail.gmail.com
Author: Richard Guo
We don't want existing slots in the old cluster to get invalidated during
the upgrade. During an upgrade, we set this variable to -1 via the command
line in an attempt to prevent such invalidations, but users have ways to
override it. This patch ensures the value is not overridden by the user.
Author: Kyotaro Horiguchi
Reviewed-by: Peter Smith, Alvaro Herrera
Discussion: http://postgr.es/m/20231027.115759.2206827438943188717.horikyota.ntt@gmail.com
We can simplify FieldSelect on a whole-row Var into a plain Var
for the selected field. However, we should copy the whole-row Var's
varnullingrels when we do so, because the new Var is clearly nullable
by exactly the same rels as the original. Failure to do this led to
errors like "wrong varnullingrels (b) (expected (b 3)) for Var 2/2".
Richard Guo, per bug #18184 from Marian Krucina. Back-patch to
v16 where varnullingrels was introduced.
Discussion: https://postgr.es/m/18184-5868dd258782058e@postgresql.org
When casting an interval to a time, the original code suffered from
64-bit integer overflow for inputs with a sufficiently large negative
"time" field, leading to bogus results.
Fix by rewriting the algorithm in a simpler form, that more obviously
cannot overflow. While at it, improve the test coverage to include
negative interval inputs.
Discussion: https://postgr.es/m/CAEZATCXoUKHkcuq4q63hkiPsKZJd0kZWzgKtU%2BNT0aU4wbf_Pw%40mail.gmail.com
When executing a MERGE UPDATE action, if the UPDATE is turned into a
cross-partition DELETE then INSERT, do not attempt to invoke AFTER
UPDATE ROW triggers, or any of the other post-update actions in
ExecUpdateEpilogue().
For consistency with a plain UPDATE command, such triggers should not
be fired (and typically fail anyway), and similarly, other post-update
actions, such as WCO/RLS checks should not be executed, and might also
lead to unexpected failures.
Therefore, as with ExecUpdate(), make ExecMergeMatched() return
immediately if ExecUpdateAct() reports that a cross-partition update
was done, to be sure that no further processing is done for that
tuple.
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWjBgagyNZs02vgDF0DvASYj-iHTFtXG2-nP3orZhmtcw%40mail.gmail.com
When the hash table is in use, ResoureOwnerSort() moves any elements
from the small fixed-size array to the hash table, and sorts it. When
the hash table is not in use, it sorts the elements in the small
fixed-size array directly. However, ResourceOwnerSort() and
ResourceOwnerReleaseAll() had different idea on when the hash table is
in use: ResourceOwnerSort() checked owner->nhash != 0, and
ResourceOwnerReleaseAll() checked owner->hash != NULL. If the hash
table was allocated but was currently empty, you hit an assertion
failure.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://www.postgresql.org/message-id/be58d565-9e95-d417-4e47-f6bd408dea4b@gmail.com
Commit b0e96f3119 introduced a bunch of recursive functions, but
failed to make them check for stack depth. This can cause the backend
to crash when operating on inheritance hierarchies several thousands
deep. Protect the code by adding the missing stack depth checks.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/b2ac2392-9727-5f76-e890-721ac80c1615@gmail.com
This buys back some of the performance loss that we otherwise saw from the
previous commit.
Reviewed-by: Aleksander Alekseev, Michael Paquier, Julien Rouhaud
Reviewed-by: Kyotaro Horiguchi, Hayato Kuroda, Álvaro Herrera, Zhihong Yu
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://www.postgresql.org/message-id/d746cead-a1ef-7efe-fb47-933311e876a3%40iki.fi
Instead of having a separate array/hash for each resource kind, use a
single array and hash to hold all kinds of resources. This makes it
possible to introduce new resource "kinds" without having to modify
the ResourceOwnerData struct. In particular, this makes it possible
for extensions to register custom resource kinds.
The old approach was to have a small array of resources of each kind,
and if it fills up, switch to a hash table. The new approach also uses
an array and a hash, but now the array and the hash are used at the
same time. The array is used to hold the recently added resources, and
when it fills up, they are moved to the hash. This keeps the access to
recent entries fast, even when there are a lot of long-held resources.
All the resource-specific ResourceOwnerEnlarge*(),
ResourceOwnerRemember*(), and ResourceOwnerForget*() functions have
been replaced with three generic functions that take resource kind as
argument. For convenience, we still define resource-specific wrapper
macros around the generic functions with the old names, but they are
now defined in the source files that use those resource kinds.
The release callback no longer needs to call ResourceOwnerForget on
the resource being released. ResourceOwnerRelease unregisters the
resource from the owner before calling the callback. That needed some
changes in bufmgr.c and some other files, where releasing the
resources previously always called ResourceOwnerForget.
Each resource kind specifies a release priority, and
ResourceOwnerReleaseAll releases the resources in priority order. To
make that possible, we have to restrict what you can do between
phases. After calling ResourceOwnerRelease(), you are no longer
allowed to remember any more resources in it or to forget any
previously remembered resources by calling ResourceOwnerForget. There
was one case where that was done previously. At subtransaction commit,
AtEOSubXact_Inval() would handle the invalidation messages and call
RelationFlushRelation(), which temporarily increased the reference
count on the relation being flushed. We now switch to the parent
subtransaction's resource owner before calling AtEOSubXact_Inval(), so
that there is a valid ResourceOwner to temporarily hold that relcache
reference.
Other end-of-xact routines make similar calls to AtEOXact_Inval()
between release phases, but I didn't see any regression test failures
from those, so I'm not sure if they could reach a codepath that needs
remembering extra resources.
There were two exceptions to how the resource leak WARNINGs on commit
were printed previously: llvmjit silently released the context without
printing the warning, and a leaked buffer io triggered a PANIC. Now
everything prints a WARNING, including those cases.
Add tests in src/test/modules/test_resowner.
Reviewed-by: Aleksander Alekseev, Michael Paquier, Julien Rouhaud
Reviewed-by: Kyotaro Horiguchi, Hayato Kuroda, Álvaro Herrera, Zhihong Yu
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://www.postgresql.org/message-id/cbfabeb0-cd3c-e951-a572-19b365ed314d%40iki.fi
These are functions where a lot of things happen between the
ResourceOwnerEnlarge and ResourceOwnerRemember calls. It's important
that there are no unrelated ResourceOwnerRemember calls in the code in
between, otherwise the reserved entry might be used up by the
intervening ResourceOwnerRemember and not be available at the intended
ResourceOwnerRemember call anymore. I don't see any bugs here, but the
longer the code path between the calls is, the harder it is to verify.
In bufmgr.c, there is a function similar to ResourceOwnerEnlarge,
ReservePrivateRefCountEntry(), to ensure that the private refcount
array has enough space. The ReservePrivateRefCountEntry() calls were
made at different places than the ResourceOwnerEnlargeBuffers()
calls. Move the ResourceOwnerEnlargeBuffers() and
ReservePrivateRefCountEntry() calls together for consistency.
Reviewed-by: Aleksander Alekseev, Michael Paquier, Julien Rouhaud
Reviewed-by: Kyotaro Horiguchi, Hayato Kuroda, Álvaro Herrera, Zhihong Yu
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://www.postgresql.org/message-id/cbfabeb0-cd3c-e951-a572-19b365ed314d%40iki.fi
false_positive_rate is a parameter that can be set with the bloom
opclass in BRIN, and setting it to a value of exactly 0.25 would trigger
an assertion in the first INSERT done on the index with value set.
The assertion changed here relied on BLOOM_{MIN|MAX}_FALSE_POSITIVE_RATE
that are somewhat arbitrary values, and specifying an out-of-range value
would also trigger a failure when defining such an index. So, as-is,
the assertion was just doubling on the min-max check of the reloption.
This is now enlarged to check that it is a correct percentage value,
instead, based on a suggestion by Tom Lane.
Author: Alexander Lakhin
Reviewed-by: Tom Lane, Shihao Zhong
Discussion: https://postgr.es/m/17969-a6c54de48026d694@postgresql.org
Backpatch-through: 14
I added it by mistake in commit 7103ebb7aa. To clean up, struct
MergeAction needs to be moved to primnodes.h from parsenodes.h. (This
forces us to also move OverridingKind to primnodes.h).
Having to add parsenodes.h to bootstrap.h as fallout is a bit
surprising, since nothing nominally needs it there. However, per
comments in bootscanner.l, it is needed so that YYSTYPE can be declared.
I think this only started with commit dac048f71e, but I didn't
actually verify that.
In passing, stop including parsenodes.h in tcopprot.h. Nothing needs it
there.
Per discussion on a patch by Ashutosh Bapat.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202311071106.6y7b2ascqjlz@alvherre.pgsql
f0efa5aec introduced the concept of "read-only" StringInfos which makes
use of an existing, possibly not NUL terminated, buffer.
Here we adjust two places that make use of StringInfos to receive data
to avoid using appendBinaryStringInfo() in cases where a NUL termination
character is not required. This saves a possible palloc() and saves
having to needlessly memcpy() from one buffer to another.
Here we adjust two places which were using appendBinaryStringInfo().
Neither of these cases seem particularly performance-critical. In the
case of XLogWalRcvProcessMsg(), the appendBinaryStringInfo() was only
appending 24 bytes. The change made here does mean that we can get rid
of the incoming_message global variable and make that local instead.
The apply_spooled_messages() case applies in logical decoding when
applying (possibly large) changes which have been serialized to a file.
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAApHDvoxYUDHwqPf-ShvchsERf1RzmkGoLwg63JNvHCkDCuyKQ@mail.gmail.com
array_set_element() and related functions allow an array to be
enlarged by assigning to subscripts outside the current array bounds.
While these places were careful to check that the new bounds are
allowable, they neglected to consider the risk of integer overflow
in computing the new bounds. In edge cases, we could compute new
bounds that are invalid but get past the subsequent checks,
allowing bad things to happen. Memory stomps that are potentially
exploitable for arbitrary code execution are possible, and so is
disclosure of server memory.
To fix, perform the hazardous computations using overflow-detecting
arithmetic routines, which fortunately exist in all still-supported
branches.
The test cases added for this generate (after patching) errors that
mention the value of MaxArraySize, which is platform-dependent.
Rather than introduce multiple expected-files, use psql's VERBOSITY
parameter to suppress the printing of the message text. v11 psql
lacks that parameter, so omit the tests in that branch.
Our thanks to Pedro Gallegos for reporting this problem.
Security: CVE-2023-5869
transformAggregateCall() captures the datatypes of the aggregate's
arguments immediately to construct the Aggref.aggargtypes list.
This seems reasonable because the arguments have already been
transformed --- but there is an edge case where they haven't been.
Specifically, if we have an unknown-type literal in an ANY argument
position, nothing will have been done with it earlier. But if we
also have DISTINCT, then addTargetToGroupList() converts the literal
to "text" type, resulting in the aggargtypes list not matching the
actual runtime type of the argument. The end result is that the
aggregate tries to interpret a "text" value as being of type
"unknown", that is a zero-terminated C string. If the text value
contains no zero bytes, this could result in disclosure of server
memory following the text literal value.
To fix, move the collection of the aggargtypes list to the end
of transformAggregateCall(), after DISTINCT has been handled.
This requires slightly more code, but not a great deal.
Our thanks to Jingzhou Fu for reporting this problem.
Security: CVE-2023-5868
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
It was always false in single-user mode, in autovacuum workers, and in
background workers. This had no specifically-identified security
consequences, but non-core code or future work might make it
security-relevant. Back-patch to v11 (all supported versions).
Jelte Fennema-Nio. Reported by Jelte Fennema-Nio.
Documentation says it cannot signal "a backend owned by a superuser".
On the contrary, it could signal background workers, including the
logical replication launcher. It could signal autovacuum workers and
the autovacuum launcher. Block all that. Signaling autovacuum workers
and those two launchers doesn't stall progress beyond what one could
achieve other ways. If a cluster uses a non-core extension with a
background worker that does not auto-restart, this could create a denial
of service with respect to that background worker. A background worker
with bugs in its code for responding to terminations or cancellations
could experience those bugs at a time the pg_signal_backend member
chooses. Back-patch to v11 (all supported versions).
Reviewed by Jelte Fennema-Nio. Reported by Hemanth Sandrana and
Mahendrakar Srinivasarao.
Security: CVE-2023-5870
This function implements the standard XMLTest function, which
converts text into xml text nodes. It uses the libxml2 function
xmlEncodeSpecialChars to escape predefined entities (&"<>), so
that those do not cause any conflict when concatenating the text
node output with existing xml documents.
This also adds a note in features.sgml about not supporting
XML(SEQUENCE). The SQL specification defines a RETURNING clause
to a set of XML functions, where RETURNING CONTENT or RETURNING
SEQUENCE can be defined. Since PostgreSQL doesn't support
XML(SEQUENCE) all of these functions operate with an
implicit RETURNING CONTENT.
Author: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/86617a66-ec95-581f-8d54-08059cca8885@uni-muenster.de
recurse_set_operations() uses the parse tree for the group number estimation,
because of the "varno 0" hack. At the same time 2489d76c49 made root->parse
and corresponding parent_root->simple_rte_array[]->subquery distinct copies
of the parse tree, while d3d55ce571 introduced self-join removal replacing
relid of removed relation only in one of the copies.
The present commit fixes this bug by making recurse_set_operations() call
estimate_num_groups() with the copy of the parse tree processed by self-join
removal.
In future, we may think about maintaining just one copy of the parse tree
and/or keeping removed relids as aliases.
Reported-by: Zuming Jiang
Bug: #18170
Discussion: https://postgr.es/m/flat/18170-f1d17bf9a0d58b24%40postgresql.org
Author: Richard Guo, Alexander Korotkov
Reviewed-by: Andrei Lepikhov
As per the preceding commit, GUC APIs generally expose NULL-valued
string variables as empty strings. Extend that policy to
GetConfigOption() and GetConfigOptionResetString(), eliminating
a crash hazard for unwary callers, as well as a fundamental
ambiguity in GetConfigOption()'s API.
No back-patch, since this is an API change and conceivably somebody
somewhere is depending on this corner case.
Xing Guo, Aleksander Alekseev, Tom Lane
Discussion: https://postgr.es/m/CACpMh+AyDx5YUpPaAgzVwC1d8zfOL4JoD-uyFDnNSa1z0EsDQQ@mail.gmail.com
get_explain_guc_options() crashed if a string GUC marked GUC_EXPLAIN
has a NULL boot_val. Nosing around found a couple of other places
that seemed insufficiently cautious about NULL string values, although
those are likely unreachable in practice. Add some commentary
defining the expectations for NULL values of string variables,
in hopes of forestalling future additions of more such bugs.
Xing Guo, Aleksander Alekseev, Tom Lane
Discussion: https://postgr.es/m/CACpMh+AyDx5YUpPaAgzVwC1d8zfOL4JoD-uyFDnNSa1z0EsDQQ@mail.gmail.com
Introduce unicode_version(), icu_unicode_version(), and
unicode_assigned().
The latter requires introducing a new lookup table for the Unicode
General Category, which is generated along with the other Unicode
lookup tables.
Discussion: https://postgr.es/m/CA+TgmoYzYR-yhU6k1XFCADeyj=Oyz2PkVsa3iKv+keM8wp-F_A@mail.gmail.com
Reviewed-by: Peter Eisentraut
pgstatindex failed with ERRCODE_DATA_CORRUPTED, of the "can't-happen"
class XX. The other functions succeeded on an empty index; they might
have malfunctioned if the failed index build left torn I/O or other
complex state. Report an ERROR in statistics functions pgstatindex,
pgstatginindex, pgstathashindex, and pgstattuple. Report DEBUG1 and
skip all index I/O in maintenance functions brin_desummarize_range,
brin_summarize_new_values, brin_summarize_range, and
gin_clean_pending_list. Back-patch to v11 (all supported versions).
Discussion: https://postgr.es/m/20231001195309.a3@google.com
When beginning recovery, a LOG is displayed by the startup process to
show which recovery mode will be used depending on the .signal file(s)
set in the data folder, like "standby mode", recovery up to a given
target type and value, or archive recovery.
A different patch is under discussion to simplify the startup code by
requiring the presence of recovery.signal and/or standby.signal when a
backup_label file is read. Delaying a bit this LOG ensures that the
correct recovery mode would be reported, and putting it at this position
does not make it lose its value.
While on it, this commit adds a few comments documenting a bit more the
initial recovery steps and their dependencies, and fixes an incorrect
comment format. This introduces no behavior changes.
Extracted from a larger patch by me.
Reviewed-by: David Steele, Bowen Shi
Discussion: https://postgr.es/m/ZArVOMifjzE7f8W7@paquier.xyz
When beginning recovery from a base backup by reading a backup_label
file, it may be possible that no checkpoint record is available
depending on the method used when the case backup was taken, which would
prevent recovery from beginning. In this case, the FATAL messages
issued, initially added by c900c15269, mentioned recovery.signal as
an option to do recovery but not standby.signal. Let's add it as an
available option, for clarity.
Per suggestion from Bowen Shi, extracted from a larger patch by me.
Author: Michael Paquier
Discussion: https://postgr.es/m/CAM_vCudkSjr7NsNKSdjwtfAm9dbzepY6beZ5DP177POKy8=2aw@mail.gmail.com
Historically, the statistics of the checkpointer have been always part
of pg_stat_bgwriter. This commit removes a few columns from
pg_stat_bgwriter, and introduces pg_stat_checkpointer with equivalent,
renamed columns (plus a new one for the reset timestamp):
- checkpoints_timed -> num_timed
- checkpoints_req -> num_requested
- checkpoint_write_time -> write_time
- checkpoint_sync_time -> sync_time
- buffers_checkpoint -> buffers_written
The fields of PgStat_CheckpointerStats and its SQL functions are renamed
to match with the new field names, for consistency. Note that
background writer and checkpointer have been split into two different
processes in commits 806a2aee37 and bf405ba8e4. The pgstat
structures were already split, making this change straight-forward.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVxX2ii=66RypXRweZe2EsBRiPMj0aHfRfHUeXJcC7kHg@mail.gmail.com
This commit refactors find_tabstat_entry() so as transaction counters
for inserted, updated and deleted tuples are included in the result
returned. If a shared entry is found for a relation, its result is now
a copy of the PgStat_TableStatus entry retrieved from shared memory.
This idea has been proposed by Andres Freund.
While on it, the following SQL functions, used in system views, are
refactored with macros, in the same spirit as 83a1a1b566, reducing the
amount of code:
- pg_stat_get_xact_tuples_deleted()
- pg_stat_get_xact_tuples_inserted()
- pg_stat_get_xact_tuples_updated()
There is now only one caller of find_tabstat_entry() in the tree.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/b9e1f543-ee93-8168-d530-d961708ad9d3@gmail.com
The original code did very little to guard against integer or floating
point overflow when computing the interval's fields. Detect any such
overflows and error out, rather than silently returning bogus results.
Joseph Koshakow, reviewed by Ashutosh Bapat and me.
Discussion: https://postgr.es/m/CAAvxfHcm1TPwH_zaGWuFoL8pZBestbRZTU6Z%3D-RvAdSXTPbKfg%40mail.gmail.com
When looping around after finding that the set-returning function
returned zero rows for the current input tuple, ExecProjectSet
neglected to reset either of the two memory contexts it's
responsible for cleaning out. Typically this wouldn't cause much
problem, because once the SRF does return at least one row, the
contexts would get reset on the next call. However, if the SRF
returns no rows for many input tuples in succession, quite a lot
of memory could be transiently consumed.
To fix, make sure we reset both contexts while looping around.
Per bug #18172 from Sergei Kornilov. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18172-9b8c5fc1d676ded3@postgresql.org
When calculating distance for interval values, the code mostly mimicked
interval_mi, i.e. it built a new interval value for the difference.
That however does not work for sufficiently distant interval values,
when the difference overflows the interval range.
Instead, we can calculate the distance directly, without constructing
the intermediate (and unnecessary) interval value.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported-by: Dean Rasheed
Reviewed-by: Ashutosh Bapat, Dean Rasheed
Backpatch-through: 14
Discussion: https://postgr.es/m/eef0ea8c-4aaa-8d0d-027f-58b1f35dd170@enterprisedb.com
Make sure that infinite values in date/timestamp columns are treated as
if in infinite distance. Infinite values should not be merged with other
values, leaving them as outliers. The code however returned distance 0
in this case, so that infinite values were merged first. While this does
not break the index (i.e. it still produces correct query results), it
may make it much less efficient.
We don't need explicit handling of infinite date/timestamp values when
calculating distances, because those values are represented as extreme
but regular values (e.g. INT64_MIN/MAX for the timestamp type).
We don't need an exact distance, just a value that is much larger than
distanced between regular values. With the added cast to double values,
we can simply subtract the values.
The regression test queries a value in the "gap" and checks the range
was properly eliminated by the BRIN index.
This only affects minmax-multi indexes on timestamp/date columns with
infinite values, which is not very common in practice. The affected
indexes may need to be rebuilt.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported-by: Ashutosh Bapat
Reviewed-by: Ashutosh Bapat, Dean Rasheed
Backpatch-through: 14
Discussion: https://postgr.es/m/eef0ea8c-4aaa-8d0d-027f-58b1f35dd170@enterprisedb.com
When calculating the distance between date values, make sure to subtract
them in the right order, i.e. (larger - smaller).
The distance is used to determine which values to merge, and is expected
to be a positive value. The code unfortunately did the subtraction in
the opposite order, i.e. (smaller - larger), thus producing negative
values and merging values the most distant values first.
The resulting index is correct (i.e. produces correct results), but may
be significantly less efficient. This affects all minmax-multi indexes
on date columns.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported-by: Ashutosh Bapat
Reviewed-by: Ashutosh Bapat, Dean Rasheed
Backpatch-through: 14
Discussion: https://postgr.es/m/eef0ea8c-4aaa-8d0d-027f-58b1f35dd170@enterprisedb.com
When calculating distances for timestamp values for BRIN minmax-multi
indexes, we need to be careful about overflows for extreme values. If
the value overflows into a negative value, the index may be inefficient.
The new regression test checks this for the timestamp type by adding a
table with enough values to force range compaction/merging. The values
are close to min/max, which means a risk of overflow.
Fixed by converting the int64 values to double first, before calculating
the distance. This prevents the overflow. We may lose some precision, of
course, but that's good enough. In the worst case we build a slightly
less efficient index, but for large distances this won't matter.
This only affects minmax-multi indexes on timestamp columns, with ranges
containing values sufficiently distant to cause an overflow. That seems
like a fairly rare case in practice.
Backpatch to 14, where minmax-multi indexes were introduced.
Reported-by: Ashutosh Bapat
Reviewed-by: Ashutosh Bapat, Dean Rasheed
Backpatch-through: 14
Discussion: https://postgr.es/m/eef0ea8c-4aaa-8d0d-027f-58b1f35dd170@enterprisedb.com
d3d55ce571 changed RelOptInfo.unique_for_rels from the list of Relid sets to
the list of UniqueRelInfo's. But it didn't make UniqueRelInfo a node.
This commit makes UniqueRelInfo a node. Also this commit revises some
comments related to RelOptInfo.unique_for_rels.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/flat/1189851.1698340331%40sss.pgh.pa.us
Two attributes related to checkpointer statistics are removed in this
commit:
- buffers_backend, that counts the number of buffers written directly by
a backend.
- buffers_backend_fsync, that counts the number of times a backend had
to do fsync() by its own.
These are actually not checkpointer properties but backend properties.
Also, pg_stat_io provides a more accurate and equivalent report of these
numbers, by tracking all the I/O stats related to backends, including
writes and fsyncs, so storing them in pg_stat_checkpointer was
redundant.
Thanks also to Robert Haas and Amit Kapila for their input.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Andres Freund
Discussion: https://postgr.es/m/20230210004604.mcszbscsqs3bc5nx@awork3.anarazel.de
f0efa5aec added initReadOnlyStringInfo to allow a StringInfo to be
initialized from an existing buffer and also relaxed the requirement
that a StringInfo's buffer must be NUL terminated at data[len]. Now
that we have that, there's no need for these aggregate deserial
functions to use appendBinaryStringInfo() as that rather wastefully
palloc'd a new buffer and memcpy'd in the bytea's buffer. Instead, we can
just use the bytea's buffer and point the StringInfo directly to that
using the new initializer function.
In Amdahl's law, this speeds up the serial portion of parallel
aggregates and makes sum(numeric), avg(numeric), var_pop(numeric),
var_samp(numeric), variance(numeric), stddev_pop(numeric),
stddev_samp(numeric), stddev(numeric), array_agg(anyarray),
string_agg(text) and string_agg(bytea) scale better in parallel queries.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvr%3De-YOigriSHHm324a40HPqcUhSp6pWWgjz5WwegR%3DcQ%40mail.gmail.com
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
There were various places in our codebase which conjured up a StringInfo
by manually assigning the StringInfo fields and setting the data field
to point to some existing buffer. There wasn't much consistency here as
to what fields like maxlen got set to and in one location we didn't
correctly ensure that the buffer was correctly NUL terminated at len
bytes, as per what was documented as required in stringinfo.h
Here we introduce 2 new functions to initialize StringInfos. One allows
callers to initialize a StringInfo passing along a buffer that is
already allocated by palloc. Here the StringInfo code uses this buffer
directly rather than doing any memcpying into a new allocation. Having
this as a function allows us to verify the buffer is correctly NUL
terminated. StringInfos initialized this way can be appended to and
reset just like any other normal StringInfo.
The other new initialization function also accepts an existing buffer,
but the given buffer does not need to be a pointer to a palloc'd chunk.
This buffer could be a pointer pointing partway into some palloc'd chunk
or may not even be palloc'd at all. StringInfos initialized this way
are deemed as "read-only". This means that it's not possible to
append to them or reset them.
For the latter of the two new initialization functions mentioned above,
we relax the requirement that the data buffer must be NUL terminated.
Relaxing this requirement is convenient in a few places as it can save
us from having to allocate an entire new buffer just to add the NUL
terminator or save us from having to temporarily add a NUL only to have to
put the original char back again later.
Incompatibility note:
Here we also forego adding the NUL in a few places where it does not
seem to be required. These locations are passing the given StringInfo
into a type's receive function. It does not seem like any of our
built-in receive functions require this, but perhaps there's some UDT
out there in the wild which does require this. It is likely worthy of
a mention in the release notes that a UDT's receive function mustn't rely
on the input StringInfo being NUL terminated.
Author: David Rowley
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvorfO3iBZ%3DxpiZvp3uHtJVLyFaPBSvcAhAq2HPLnaNSwQ%40mail.gmail.com
Currently, expand_single_inheritance_child() doesn't reset
perminfoindex in a plain-inheritance parent's child RTE, because
prior to 387f9ed0a0, the executor would use the first child RTE to
locate the parent's RTEPermissionInfo. That in turn causes
add_rte_to_flat_rtable() to create an extra RTEPermissionInfo
belonging to the parent's child RTE with the same content as the one
belonging to the parent's original ("root") RTE.
In 387f9ed0a0, we changed things so that the executor can now use the
parent's "root" RTE for locating its RTEPermissionInfo instead of the
child RTE, so the latter's perminfoindex need not be set anymore, so
make it so.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/839708.1698174464@sss.pgh.pa.us
Backpatch-through: 16
While reading information from the old cluster, a list of logical
slots is fetched. At the later part of upgrading, pg_upgrade revisits the
list and restores slots by executing pg_create_logical_replication_slot()
on the new cluster. Migration of logical replication slots is only
supported when the old cluster is version 17.0 or later.
If the old node has invalid slots or slots with unconsumed WAL records,
the pg_upgrade fails. These checks are needed to prevent data loss.
The significant advantage of this commit is that it makes it easy to
continue logical replication even after upgrading the publisher node.
Previously, pg_upgrade allowed copying publications to a new node. With
this patch, adjusting the connection string to the new publisher will
cause the apply worker on the subscriber to connect to the new publisher
automatically. This enables seamless continuation of logical replication,
even after an upgrade.
Author: Hayato Kuroda, Hou Zhijie
Reviewed-by: Peter Smith, Bharath Rupireddy, Dilip Kumar, Vignesh C, Shlok Kyal
Discussion: http://postgr.es/m/TYAPR01MB58664C81887B3AF2EB6B16E3F5939@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: http://postgr.es/m/CAA4eK1+t7xYcfa0rEQw839=b2MzsfvYDPz3xbD+ZqOdP3zpKYg@mail.gmail.com
The Self Join Elimination (SJE) feature removes an inner join of a plain table
to itself in the query tree if is proved that the join can be replaced with
a scan without impacting the query result. Self join and inner relation are
replaced with the outer in query, equivalence classes, and planner info
structures. Also, inner restrictlist moves to the outer one with removing
duplicated clauses. Thus, this optimization reduces the length of the range
table list (this especially makes sense for partitioned relations), reduces
the number of restriction clauses === selectivity estimations, and potentially
can improve total planner prediction for the query.
The SJE proof is based on innerrel_is_unique machinery.
We can remove a self-join when for each outer row:
1. At most one inner row matches the join clause.
2. Each matched inner row must be (physically) the same row as the outer one.
In this patch we use the next approach to identify a self-join:
1. Collect all merge-joinable join quals which look like a.x = b.x
2. Add to the list above the baseretrictinfo of the inner table.
3. Check innerrel_is_unique() for the qual list. If it returns false, skip
this pair of joining tables.
4. Check uniqueness, proved by the baserestrictinfo clauses. To prove
the possibility of self-join elimination inner and outer clauses must have
an exact match.
The relation replacement procedure is not trivial and it is partly combined
with the one, used to remove useless left joins. Tests, covering this feature,
were added to join.sql. Some regression tests changed due to self-join removal
logic.
Discussion: https://postgr.es/m/flat/64486b0b-0404-e39e-322d-0801154901f3%40postgrespro.ru
Author: Andrey Lepikhov, Alexander Kuzmenkov
Reviewed-by: Tom Lane, Robert Haas, Andres Freund, Simon Riggs, Jonathan S. Katz
Reviewed-by: David Rowley, Thomas Munro, Konstantin Knizhnik, Heikki Linnakangas
Reviewed-by: Hywel Carver, Laurenz Albe, Ronan Dunklau, vignesh C, Zhihong Yu
Reviewed-by: Greg Stark, Jaime Casanova, Michał Kłeczek, Alena Rybakina
Reviewed-by: Alexander Korotkov
When an UPDATE/DELETE/MERGE's target table is an old-style
inheritance tree, it's possible for the parent to get excluded
from the plan while some children are not. (I believe this is
only possible if we can prove that a CHECK ... NO INHERIT
constraint on the parent contradicts the query WHERE clause,
so it's a very unusual case.) In such a case, ExecInitModifyTable
mistakenly concluded that the first surviving child is the target
table, leading to at least two bugs:
1. The wrong table's statement-level triggers would get fired.
2. In v16 and up, it was possible to fail with "invalid perminfoindex
0 in RTE with relid nnnn" due to the child RTE not having permissions
data included in the query plan. This was hard to reproduce reliably
because it did not occur unless the update triggered some non-HOT
index updates.
In v14 and up, this is easy to fix by defining ModifyTable.rootRelation
to be the parent RTE in plain inheritance as well as partitioned cases.
While the wrong-triggers bug also appears in older branches, the
relevant code in both the planner and executor is quite a bit
different, so it would take a good deal of effort to develop and
test a suitable patch. Given the lack of field complaints about the
trigger issue, I'll desist for now. (Patching v11 for this seems
unwise anyway, given that it will have no more releases after next
month.)
Per bug #18147 from Hans Buschmann.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/18147-6fc796538913ee88@postgresql.org
Enforce the rule from transam/README in XLogRegisterBuffer(), and
update callers to follow the rule.
Hash indexes sometimes register clean pages as a part of the locking
protocol, so provide a REGBUF_NO_CHANGE flag to support that use.
Discussion: https://postgr.es/m/c84114f8-c7f1-5b57-f85a-3adc31e1a904@iki.fi
Reviewed-by: Heikki Linnakangas
This shouldn't change behavior except in the unusual case where
there are file in the tablespace directory that have entirely
numeric names but are nevertheless not possible names for a
tablespace directory, either because their names have leading zeroes
that shouldn't be there, or the value is actually zero, or because
the value is too large to represent as an OID.
In those cases, the directory would previously have made it into
the list of tablespaceinfo objects and no longer will. Thus, base
backups will now ignore such directories, instead of treating them
as legitimate tablespace directories. Similarly, if entries for
such tablespaces occur in a tablespace_map file, they will now
be rejected as erroneous, instead of being honored.
This is infrastructure for future work that wants to be able to
know the tablespace of each relation that is part of a backup
*as an OID*. By strengthening the up-front validation, we don't
have to worry about weird cases later, and can more easily avoid
repeated string->integer conversions.
Patch by me, reviewed by David Steele.
Discussion: http://postgr.es/m/CA+TgmoZNVeBzoqDL8xvr-nkaepq815jtDR4nJzPew7=3iEuM1g@mail.gmail.com
Instead of returning the number of characters in the RelFileNumber,
return the RelFileNumber itself. Continue to return the fork number,
as before, and additionally return the segment number.
parse_filename_for_nontemp_relation now rejects a RelFileNumber or
segment number that begins with a leading zero. Before, we accepted
such cases as relation filenames, but if we continued to do so after
this change, the function might return the same values for two
different files (e.g. 1234.5 and 001234.5 or 1234.005) which could be
annoying for callers. Since we don't actually ever generate filenames
with leading zeroes in the names, any such files that we find must
have been created by something other than PostgreSQL, and it is
therefore reasonable to treat them as non-relation files.
Along the way, change unlogged_relation_entry to store a RelFileNumber
rather than an OID. This update should have been made in
851f4cc75c, but it was overlooked.
It's trivial to make the update as part of this commit, perhaps more
trivial than it would have been without it, so do that.
Patch by me, reviewed by David Steele.
Discussion: http://postgr.es/m/CA+TgmoZNVeBzoqDL8xvr-nkaepq815jtDR4nJzPew7=3iEuM1g@mail.gmail.com
pg_logical_replication_slot_advance() included a break condition to stop
when a targeted LSN is reached, when processing a series of WAL records
with XLogReadRecord(). Since 38a957316d, it matched with the check of
its main while loop. This condition saved from an extra CFI check,
actually pointless, so let's remove this condition and simplify the
code.
In passing, fix an incorrect comment.
Author: Bharath Rupireddy
Reviewed-by: Tom Lane, Gurjeet Singh
Discussion: https://postgr.es/m/CALj2ACWfGDLQ2cy7ZKwxnJqbDkO6Yvqqrqxne5ZN4HYm=PRTGg@mail.gmail.com
When min_dynamic_shared_memory is set above 0, we try to find space in a
pre-allocated region of the main shared memory area instead of calling
dsm_impl_XXX() routines to allocate more. The dsm_pin_segment() and
dsm_unpin_segment() routines had a bug: they called dsm_impl_XXX()
routines even for main region segments. Nobody noticed before now
because those routines do nothing on Unix, but on Windows they'd fail
while attempting to duplicate an invalid Windows HANDLE. Add the
missing gating.
Back-patch to 14, where commit 84b1c63a added this feature. Fixes
pgsql-bugs bug #18165.
Reported-by: Maxime Boyer <maxime.boyer@cra-arc.gc.ca>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/18165-bf4f525cea6e51de%40postgresql.org
Previously, ALTER SYSTEM failed if the target GUC wasn't present in
the session's GUC hashtable. That is a reasonable behavior for core
(single-part) GUC names, and for custom GUCs for which we have loaded
an extension that's reserved the prefix. But it's unnecessarily
restrictive otherwise, and it also causes inconsistent behavior:
you can "ALTER SYSTEM SET foo.bar" only if you did "SET foo.bar"
earlier in the session. That's fairly silly.
Hence, refactor things so that we can execute ALTER SYSTEM even
if the variable doesn't have a GUC hashtable entry, as long as the
name meets the custom-variable naming requirements and does not
have a reserved prefix. (It's safe to do this even if the
variable belongs to an extension we currently don't have loaded.
A bad value will at worst cause a WARNING when the extension
does get loaded.)
Also, adjust GRANT ON PARAMETER to have the same opinions about
whether to allow an unrecognized GUC name, and to throw the
same errors if not (it previously used a one-size-fits-all
message for several distinguishable conditions). By default,
only a superuser will be allowed to do ALTER SYSTEM SET on an
unrecognized name, but it's possible to GRANT the ability to
do it.
Patch by me, pursuant to a documentation complaint from
Gavin Panella. Arguably this is a bug fix, but given the
lack of other complaints I'll refrain from back-patching.
Discussion: https://postgr.es/m/2617358.1697501956@sss.pgh.pa.us
Discussion: https://postgr.es/m/169746329791.169914.16613647309012285391@wrigleys.postgresql.org
Allow the COMMUTATOR, NEGATOR, MERGES, and HASHES attributes to be set
by ALTER OPERATOR. However, we don't allow COMMUTATOR/NEGATOR to be
changed once set, nor allow the MERGES/HASHES flags to be unset once
set. Changes like that might invalidate plans already made, and
dealing with the consequences seems like more trouble than it's worth.
The main use-case we foresee for this is to allow addition of missed
properties in extension update scripts, such as extending an existing
operator to support hashing. So only transitions from not-set to set
states seem very useful.
This patch also causes us to reject some incorrect cases that formerly
resulted in inconsistent catalog state, such as trying to set the
commutator of an operator to be some other operator that already has a
(different) commutator.
While at it, move the InvokeObjectPostCreateHook call for CREATE
OPERATOR to not occur until after we've fixed up commutator or negator
links as needed. The previous ordering could only be justified by
thinking of the OperatorUpd call as a kind of ALTER OPERATOR step;
but we don't call InvokeObjectPostAlterHook therein. It seems better
to let the hook see the final state of the operator object.
In the documentation, move the discussion of how to establish
commutator pairs from xoper.sgml to the CREATE OPERATOR ref page.
Tommy Pavlicek, reviewed and editorialized a bit by me
Discussion: https://postgr.es/m/CAEhP-W-vGVzf4udhR5M8Bdv88UYnPrhoSkj3ieR3QNrsGQoqdg@mail.gmail.com
This allows tools that read the WAL sequentially to identify (possible)
redo points when they're reached, rather than only being able to
detect them in retrospect when XLOG_CHECKPOINT_ONLINE is found, possibly
much later in the WAL stream. There are other possible applications as
well; see the discussion links below.
Any redo location that precedes the checkpoint location should now point
to an XLOG_CHECKPOINT_REDO record, so add a cross-check to verify this.
While adjusting the code in CreateCheckPoint() for this patch, I made it
call WALInsertLockAcquireExclusive a bit later than before, since there
appears to be no need for it to be held while checking whether the system
is idle, whether this is an end-of-recovery checkpoint, or what the current
timeline is.
Bump XLOG_PAGE_MAGIC.
Patch by me, based in part on earlier work from Dilip Kumar. Review by
Dilip Kumar, Amit Kapila, Andres Freund, and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoYy-Vc6G9QKcAKNksCa29cv__czr+N9X_QCxEfQVpp_8w@mail.gmail.com
Discussion: http://postgr.es/m/20230614194717.jyuw3okxup4cvtbt%40awork3.anarazel.de
Discussion: http://postgr.es/m/CA+hUKG+b2ego8=YNW2Ohe9QmSiReh1-ogrv8V_WZpJTqP3O+2w@mail.gmail.com
There was no I/O timing statistics for counting read and write timings
on local blocks, contrary to the counterparts for temp and shared
blocks. This information is available when track_io_timing is enabled.
The output of EXPLAIN is updated to show this information. An update of
pg_stat_statements is planned next.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
These two counters, defined in BufferUsage to track respectively the
time spent while reading and writing blocks have historically only
tracked data related to shared buffers, when track_io_timing is enabled.
An upcoming patch to add specific counters for local buffers will take
advantage of this rename as it has come up that no data is currently
tracked for local buffers, and tracking local and shared buffers using
the same fields would be inconsistent with the treatment done for temp
buffers. Renaming the existing fields clarifies what the block type of
each stats field is.
pg_stat_statement is updated to reflect the rename. No extension
version bump is required as 5a3423ad8e has done one, affecting v17~.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
Remove use of LLVMGetElementType() and provide the type of all pointers
to LLVMBuildXXX() functions when emitting IR, as required by modern LLVM
versions[1].
* For LLVM <= 14, we'll still use the old LLVMBuildXXX() functions.
* For LLVM == 15, we'll continue to do the same, explicitly opting
out of opaque pointer mode.
* For LLVM >= 16, we'll use the new LLVMBuildXXX2() functions that take
the extra type argument.
The difference is hidden behind some new IR emitting wrapper functions
l_load(), l_gep(), l_call() etc. The change is mostly mechanical,
except that at each site the correct type had to be provided.
In some places we needed to do some extra work to get functions types,
including some new wrappers for C++ APIs that are not yet exposed by in
LLVM's C API, and some new "example" functions in llvmjit_types.c
because it's no longer possible to start from the function pointer type
and ask for the function type.
Back-patch to 12, because it's a little tricker in 11 and we agreed not
to put the latest LLVM support into the upcoming final release of 11.
[1] https://llvm.org/docs/OpaquePointers.html
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGKNX_%3Df%2B1C4r06WETKTq0G4Z_7q4L4Fxn5WWpMycDj9Fw%40mail.gmail.com
Relation files extended by multiple blocks at a time have been counting
the number of blocks written, but forgot to increment the write time in
this case, as single-block write and relation extension are treated as
two different I/O operations in the shared stats: IOOP_EXTEND vs
IOOP_WRITE. In this case IOOP_EXTEND was forgotten for normal
(non-temporary) relations, still the number of blocks written was
incremented according to the relation extend done.
Write times are tracked when track_io_timing is enabled, which is not
the case by default.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
Backpatch-through: 16
Since its introduction, LogLogicalMessage() (via the SQL interface
pg_logical_emit_message()) has never included a call to XLogFlush(),
causing it to potentially lose messages on a crash when used in
non-transactional mode. This has come up to me as a problem while
playing with ideas to design a test suite for what has become
039_end_of_wal.pl introduced in bae868caf2 by Thomas Munro, because
there are no direct ways to force a WAL flush via SQL.
The default is false, to not flush messages and influence existing
use-cases where this function could be used. If set to true, the
message emitted is flushed before returning back to the caller, making
the message durable on crash. This new option has no effect when using
pg_logical_emit_message() in transactional mode, as the record's flush
is guaranteed by the WAL record generated by the transaction committed.
Two queries of test_decoding are tweaked to cover the new code path for
the flush.
Bump catalog version.
Author: Michael Paquier
Reviewed-by: Andres Freund, Amit Kapila, Fujii Masao, Tung Nguyen, Tomas
Vondra
Discussion: https://postgr.es/m/ZNsdThSe2qgsfs7R@paquier.xyz
Use a modulo operator instead of implementing the same behavior
with a loop. The loop solution is doubtless microscopically
faster for the typical case of only wrapping into the very next
day, but maybe not so much for large interval values. In any
case, timetz is such a backwater that it's doubtful anybody
would notice any performance change anyway.
This avoids a compiler bug occurring in AIX's xlc, even in pretty
late-model revisions.
We did not have test coverage for the case where the initial
result->time value is negative, so add that.
For the moment, install this only in HEAD. My plan is to
back-patch the test case, and then the code change assuming that
buildfarm testing proves the bug occurs in the back branches.
(That seems pretty likely, but let's find out for sure.)
Per buildfarm results from commits 97957fdba and 2f0472030.
Thanks to Michael Paquier for the idea to use a modulo operation
to replace the faulty loop.
Discussion: https://postgr.es/m/CA+hUKGK=DOC+hE-62FKfZy=Ybt5uLkrg3zCZD-jFykM-iPn8yw@mail.gmail.com
The SIGTERM handler for the startup process immediately calls
proc_exit() for the duration of the restore_command, i.e., a call
to system(). This system() call forks a new process to execute the
shell command, and this child process inherits the parent's signal
handlers. If both the parent and child processes receive SIGTERM,
both will attempt to call proc_exit(). This can end badly. For
example, both processes will try to remove themselves from the
PGPROC shared array.
To fix this problem, this commit adds a check in
StartupProcShutdownHandler() to see whether MyProcPid == getpid().
If they match, this is the parent process, and we can proc_exit()
like before. If they do not match, this is a child process, and we
just emit a message to STDERR (in a signal safe manner) and
_exit(), thereby skipping any problematic exit callbacks.
This commit also adds checks in proc_exit(), ProcKill(), and
AuxiliaryProcKill() that verify they are not being called within
such child processes.
Suggested-by: Andres Freund
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 11
First, we shouldn't recommend switching to single-user mode, because
that's terrible advice. Especially on newer versions where VACUUM
will enter emergency mode when nearing (M)XID exhaustion, it's
perfectly fine to just VACUUM in multi-user mode. Doing it that way
is less disruptive and avoids disabling the safeguards that prevent
actual wraparound, so recommend that instead.
Second, be more precise about what is going to happen (when we're
nearing the limits) or what is happening (when we actually hit them).
The database doesn't shut down, nor does it refuse all commands. It
refuses commands that assign whichever of XIDs and MXIDs are nearly
exhausted.
No back-patch. The existing hint that advises going to single-user
mode is sufficiently awful advice that removing it or changing it
might be justifiable even though we normally avoid changing
user-facing messages in back-branches, but I (rhaas) felt that it
was better to be more conservative and limit this fix to master
only. Aside from the usual risk of breaking translations, people
might be used to the existing message, or even have monitoring
scripts that look for it.
Alexander Alekseev, John Naylor, Robert Haas, reviewed at various
times by Peter Geoghegan, Hannu Krosing, and Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZBg95FiR9wVQPAXpGPRkacSt2okVge+PKPPFppN7sfnQ@mail.gmail.com
The word "assign" is used in various places internally to describe what
GetNewMultiXactId does, but the user-facing messages have previously
said "generate". For consistency, standardize on "assign," which seems
(at least to me) to be slightly clearer.
Discussion: http://postgr.es/m/CA+TgmoaoE1_i3=4-7GCTtKLVZVQ2Gh6qESW2VG1OprtycxOHMA@mail.gmail.com
It is possible that the tail XID of pg_serial/ gets ahead of its head
XID, which would cause the truncation of pg_serial/ done during
checkpoints to show up as a "wraparound" LOG in SimpleLruTruncate(),
which is confusing. This also wastes a bit of disk space until the head
page is reclaimed again.
CheckPointPredicate() is changed so as the cutoff page for the
truncation is switched to the head page if the tail XID has advanced
beyond the head XID, rather than the tail page. This prevents the
confusing LOG message about a wraparound while allowing some truncation
to be done to cut in disk space.
This could be considered as a bug fix, but the original behavior is
harmless as well, resulting only in disk space temporarily wasted, so
no backpatch is done.
Author: Sami Imseih
Reviewed-by: Heikki Linnakangas, Michael Paquier
Discussion: https://postgr.es/m/755E19CA-D02C-4A4C-80D3-74F775410C48@amazon.com
Restart the apply worker if the subscription owner's superuser privileges
have been revoked. This is required so that the subscription connection
string gets revalidated and use the password option to connect to the
publisher for non-superusers, if required.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: http://postgr.es/m/CALDaNm2Dxmhq08nr4P6G+24QvdBo_GAVyZ_Q1TcGYK+8NHs9xw@mail.gmail.com
Dropping a temp table could entail TOAST table access to clean out
toasted catalog entries, such as large pg_constraint.conbin strings
for complex CHECK constraints. If we did that via ON COMMIT DROP,
we triggered the assertion in init_toast_snapshot(), because
there was no provision for setting up a snapshot for the drop
actions. Fix that.
(I assume here that the adjacent truncation actions for ON COMMIT
DELETE ROWS don't have a similar problem: it doesn't seem like
nontransactional truncations would need to touch any toasted fields.
If that proves wrong, we could refactor a bit to have the same
snapshot acquisition cover that too.)
The test case added here does not fail before v15, because that
assertion was added in 277692220 which was not back-patched.
However, the race condition the assertion warns of surely
exists further back, so back-patch to all supported branches.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs4-x26=_QxxgdJyNbiCDzvtr2WV5ZDso_v-CukKEe6cBZw@mail.gmail.com
If SIGTERM is received within this section, the startup process
will immediately proc_exit() in the signal handler, so it is
inadvisable to include any more code than is required there (as
such code is unlikely to be compatible with doing proc_exit() in a
signal handler). This commit moves the code recently added to this
section (see 1b06d7bac9 and 7fed801135) to outside of the section.
This ensures that the startup process only calls proc_exit() in its
SIGTERM handler for the duration of the system() call, which is how
this code worked from v8.4 to v14.
Reported-by: Michael Paquier, Thomas Munro
Analyzed-by: Andres Freund
Suggested-by: Tom Lane
Reviewed-by: Michael Paquier, Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 15
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
Commit dc7d70ea added functions that read the control file, but didn't
acquire ControlFileLock. With unlucky timing, file systems that have
weak interlocking like ext4 and ntfs could expose partially overwritten
contents, and the checksum would fail.
Back-patch to all supported releases.
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Anton A. Melnikov <aamelnikov@inbox.ru>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20221123014224.xisi44byq3cf5psi%40awork3.anarazel.de
For the same reasons given in commit 403ac226d, adjust these
functions to not assume that checking SearchSysCacheExists can
guarantee success of a later fetch.
This follows the same internal API choices made in the earlier commit:
add a function XXXExt(oid, is_missing) and use that to eliminate
the need for a separate existence check. The changes are very
straightforward, though tedious. For the moment I just made the new
functions static in namespace.c, but we could export them if a need
emerges.
Per bug #18014 from Alexander Lakhin. Given the lack of hard evidence
that there's a bug in non-debug builds, I'm content to fix this only
in HEAD.
Discussion: https://postgr.es/m/18014-28c81cb79d44295d@postgresql.org
The versions of these functions that accept object OIDs are supposed
to return NULL, rather than failing, if the target object has been
dropped. This makes it safe(r) to use them in queries that scan
catalogs, since the functions will be applied to objects that are
visible in the query's snapshot but might now be gone according to
the catalog snapshot. In most cases we implemented this by doing
a SearchSysCacheExists test and assuming that if that succeeds, we
can safely invoke the appropriate aclchk.c function, which will
immediately re-fetch the same syscache entry. It was argued that
if the existence test succeeds then the followup fetch must succeed
as well, for lack of any intervening AcceptInvalidationMessages call.
Alexander Lakhin demonstrated that this is not so when
CATCACHE_FORCE_RELEASE is enabled: the syscache entry will be forcibly
dropped at the end of SearchSysCacheExists, and then it is possible
for the catalog snapshot to get advanced while re-fetching the entry.
Alexander's test case requires the operation to happen inside a
parallel worker, but that seems incidental to the fundamental problem.
What remains obscure is whether there is a way for this to happen in a
non-debug build. Nonetheless, CATCACHE_FORCE_RELEASE is a very useful
test methodology, so we'd better make the code safe for it.
After some discussion we concluded that the most future-proof fix
is to give up the assumption that checking SearchSysCacheExists can
guarantee success of a later fetch. At best that assumption leads
to fragile code --- for example, has_type_privilege appears broken
for array types even if you believe the assumption holds. And it's
not even particularly efficient.
There had already been some work towards extending the aclchk.c
APIs to include "is_missing" output flags, so this patch extends
that work to cover all the aclchk.c functions that are used by the
has_xxx_privilege() functions. (This allows getting rid of some
ad-hoc decisions about not throwing errors in certain places in
aclchk.c.)
In passing, this fixes the has_sequence_privilege() functions to
provide the same guarantees as their cousins: for some reason the
SearchSysCacheExists tests never got added to those.
There is more work to do to remove the unsafe coding pattern with
SearchSysCacheExists in other places, but this is a pretty
self-contained patch so I'll commit it separately.
Per bug #18014 from Alexander Lakhin. Given the lack of hard evidence
that there's a bug in non-debug builds, I'm content to fix this only
in HEAD. (Perhaps we should clean up the has_sequence_privilege()
oversight in the back branches, but in the absence of field complaints
I'm not too excited about that either.)
Discussion: https://postgr.es/m/18014-28c81cb79d44295d@postgresql.org
When COPYing into a partitioned table that does now permit the use of
table_multi_insert(), we could error out with
ERROR: could not read block NN in file "base/...": read only 0 of 8192 bytes
because BulkInsertState->next_free was not reset between partitions. This
problem occurred only when not able to use table_multi_insert(), as a
dedicated BulkInsertState for each partition is used in that case.
The bug was introduced in 00d1e02be2, but it was hard to hit at that point,
as commonly bulk relation extension is not used when not using
table_multi_insert(). It became more likely after 82a4edabd2, which expanded
the use of bulk extension.
To fix the bug, reset the bulk relation extension state in BulkInsertState in
ReleaseBulkInsertStatePin(). That was added (in b1ecb9b3fc) to tackle a very
similar issue. Obviously the name is not quite correct, but there might be
external callers, and bulk insert state needs to be reset in precisely in the
situations that ReleaseBulkInsertStatePin() already needed to be called.
Medium term the better fix likely is to disallow reusing BulkInsertState
across relations.
Add a test that, without the fix, reproduces #18130 in most
configurations. The test also catches the problem fixed in b1ecb9b3fc when
run with small shared_buffers.
Reported-by: Ivan Kolombet <enderstd@gmail.com>
Analyzed-by: Tom Lane <tgl@sss.pgh.pa.us>
Analyzed-by: Andres Freund <andres@anarazel.de>
Bug: #18130
Discussion: https://postgr.es/m/18130-7a86a7356a75209d%40postgresql.org
Discussion: https://postgr.es/m/257696.1695670946%40sss.pgh.pa.us
Backpatch: 16-
* sync_method is renamed to wal_sync_method.
* sync_method_options[] is renamed to wal_sync_method_options[].
* assign_xlog_sync_method() is renamed to assign_wal_sync_method().
* The names of the available synchronization methods are now
prefixed with "WAL_SYNC_METHOD_" and have been moved into a
WalSyncMethod enum.
* PLATFORM_DEFAULT_SYNC_METHOD is renamed to
PLATFORM_DEFAULT_WAL_SYNC_METHOD, and DEFAULT_SYNC_METHOD is
renamed to DEFAULT_WAL_SYNC_METHOD.
These more descriptive names help distinguish the code for
wal_sync_method from the code for DataDirSyncMethod (e.g., the
recovery_init_sync_method configuration parameter and the
--sync-method option provided by several frontend utilities). This
change also prevents name collisions between the aforementioned
sets of code. Since this only improves the naming of internal
identifiers, there should be no behavior change.
Author: Maxim Orlov
Discussion: https://postgr.es/m/CACG%3DezbL1gwE7_K7sr9uqaCGkWhmvRTcTEnm3%2BX1xsRNwbXULQ%40mail.gmail.com
When converting a timestamp to/from with/without time zone, the SQL
Standard specifies an AT LOCAL variant of AT TIME ZONE which uses the
session's time zone. This includes three system functions able to do
the work in the same way as the existing flavors for AT TIME ZONE,
except that these need to be marked as stable as they depend on the
session's TimeZone GUC.
Bump catalog version.
Author: Vik Fearing
Reviewed-by: Laurenz Albe, Cary Huang, Michael Paquier
Discussion: https://postgr.es/m/8e25dec4-5667-c1a5-6581-167d710c2182@postgresfriends.org
When MyProc->delayChkptFlags is set to temporarily block phase
transitions in a concurrent checkpoint, the checkpointer enters a
sleep-poll loop to wait for the flag to be cleared. We should show that
as a wait event in the pg_stat_activity view.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGL7Whi8iwKbzkbn_1fixH3Yy8aAPz7mfq6Hpj7FeJrKMg%40mail.gmail.com
An upcoming patch wants to introduce an additional special case in
this function. To keep that as cheap as possible, minimize the amount
of branching that we do based on whether this is an XLOG_SWITCH
record.
Additionally, and also in the interest of keeping the overhead of
special-case code paths as low as possible, apply likely() to the
non-XLOG_SWITCH case, since only a very tiny fraction of WAL records
will be XLOG_SWITCH records.
Patch by me, reviewed by Dilip Kumar, Amit Kapila, Andres Freund,
and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoYy-Vc6G9QKcAKNksCa29cv__czr+N9X_QCxEfQVpp_8w@mail.gmail.com
This could only affect HASH partitioned tables with at least 2 partition
key columns.
If partition pruning was delayed until execution and the query contained
an IS NULL qual on one of the partitioned keys, and some subsequent
partitioned key was being compared to a non-Const, then this could result
in a crash due to the incorrect keyno being used to calculate the
stateidx for the expression evaluation code.
Here we fix this by properly skipping partitioned keys which have a
nullkey set. Effectively, this must be the same as what's going on
inside perform_pruning_base_step().
Sergei Glukhov also provided a patch, but that's not what's being used
here.
Reported-by: Sergei Glukhov
Reviewed-by: tender wang, Sergei Glukhov
Discussion: https://postgr.es/m/d05b26fa-af54-27e1-f693-6c31590802fa@postgrespro.ru
Backpatch-through: 11, where runtime partition pruning was added.
get_steps_using_prefix_recurse() incorrectly assumed that it could stop
recursive processing of the 'prefix' list when cur_keyno was one before
the step_lastkeyno. Since hash partition pruning can prune using IS
NULL quals, and these IS NULL quals are not present in the 'prefix'
list, then that logic could cause more levels of recursion than what is
needed and lead to there being no more items in the 'prefix' list to
process. This would manifest itself as a crash in some code that
expected the 'start' ListCell not to be NULL.
Here we adjust the logic so that instead of stopping recursion at 1 key
before the step_lastkeyno, we just look at the llast(prefix) item and
ensure we only recursively process up until just before whichever the last
key is. This effectively allows keys to be missing in the 'prefix' list.
This change does mean that step_lastkeyno is no longer needed, so we
remove that from the static functions. I also spent quite some time
reading this code and testing it to try to convince myself that there
are no other issues. That resulted in the irresistible temptation of
rewriting some comments, many of which were just not true or inconcise.
Reported-by: Sergei Glukhov
Reviewed-by: Sergei Glukhov, tender wang
Discussion: https://postgr.es/m/2f09ce72-315e-2a33-589a-8519ada8df61@postgrespro.ru
Backpatch-through: 11, where partition pruning was introduced.
This adds a new option called BGWORKER_BYPASS_ROLELOGINCHECK to the
flags available to BackgroundWorkerInitializeConnection() and
BackgroundWorkerInitializeConnectionByOid().
This gives the possibility to bgworkers to bypass the role login check,
making possible the use of a role that has no login rights while not
being a superuser. PostgresInit() gains a new flag called
INIT_PG_OVERRIDE_ROLE_LOGIN, taking advantage of the refactoring done in
4800a5dfb4.
Regression tests are added to worker_spi to check the behavior of this
new option with bgworkers.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/bcc36259-7850-4882-97ef-d6b905d2fc51@gmail.com
In commit 3fc6e2d7f, I (tgl) argued that we only need to check for
a constant-FALSE restriction clause when there's exactly one
restriction clause, on the grounds that const-folding would have
thrown away anything ANDed with a Const FALSE. That's true just after
const-folding has been applied, but subsequent processing such as
equivalence class expansion could result in cases where a Const FALSE
is ANDed with some other stuff. (Compare for instance joinrels.c's
restriction_is_constant_false.) Hence, tweak this logic to check all
the elements of the baserestrictinfo list, not just one; that's cheap
enough to not be worth worrying about.
There is one existing test case where this visibly improves the plan.
There would not be any savings in runtime, but the planner effort and
executor startup effort will be reduced, and anyway it's odd that
we can detect related cases but not this one.
Richard Guo (independently discovered by David Rowley)
Discussion: https://postgr.es/m/CAMbWs4_x3-CnVVrCboS1LkEhB5V+W7sLSCabsRiG+n7+5_kqbg@mail.gmail.com
The check is not about processing the startup packet, so the calling
function seems like a more natural place. I'm also working on a patch
that moves 'canAcceptConnections' out of the Port struct, and this
makes that refactoring more convenient.
Reviewed-by: Tristan Partin
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
InitPostgres() has been using a set of boolean arguments to control its
behavior, and a patch under discussion was aiming at expanding it with a
third one. In preparation for expanding this area, this commit switches
all the current boolean arguments of this routine to a single bits32
argument instead. Two values are currently supported for the flags:
- INIT_PG_LOAD_SESSION_LIBS to load [session|local]_preload_libraries at
startup.
- INIT_PG_OVERRIDE_ALLOW_CONNS to allow connection to a database even if
it has !datallowconn. This is used by bgworkers.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/ZSTn66_BXRZCeaqS@paquier.xyz
Since we added the PlannerInfo.all_baserels set, it's not really
necessary to grovel over the rangetable to count baserels in the
current query. So let's drop has_multiple_baserels() in favor
of a bms_membership() test. This might be microscopically
faster, but the main point is to remove some unnecessary code.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_8RcSbbfs1ASZLrMuL0c0EQgXWcoLTQD8swBRY_pQQiA@mail.gmail.com
While working on a8a968a82, I failed to consider that
cheapest_startup_path can be NULL when there is no non-parameterized
path in the pathlist. This is well documented in set_cheapest(), I just
failed to notice.
Here we adjust the code to just check if the RelOptInfo has a
cheapest_startup_path set before adding it to the startup_subpaths list.
Reported-by: Richard Guo
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs49w3t03V69XhdCuw+GDwivny4uQUxrkVp6Gejaspt0wMQ@mail.gmail.com
The comment claimed that it is "called from postmaster", but it is
actually called in the child process, pretty early in the process
initialization. I guess you could interpret "called from postmaster"
to mean that, but it seems wrong to me. Rename the function to be
consistent with other functions with similar role.
Reviewed-by: Thomas Munro
Discussion: https://www.postgresql.org/message-id/4f95c1fc-ad3c-7974-3a8c-6faa3931804c@iki.fi
In EXEC_BACKEND or single-user mode, we process
shared_preload_libraries at postmaster startup as usual, but also at
backend startup. When a library calls RegisterBackgroundWorker() when
being loaded into a backend process, we go through the motions to add
the worker to BackgroundWorkerList, even though that is a
postmaster-private data structure. Make it return early when called in
a backend process, without changing BackgroundWorkerList.
You could argue that it was intentional: In non-EXEC_BACKEND mode, the
backend processes inherit BackgroundWorkerList at fork(), so it does
make some sense to initialize it to the same state in EXEC_BACKEND
mode, too. It's clearly a postmaster-private structure, though, and
all the functions that use it are clearly marked as "should only be
called in postmaster".
You could also argue that libraries should not call
RegisterBackgroundWorker() during backend startup. It's too late to
correctly register any static background workers at that stage. But
it's a common pattern in extensions, and it doesn't seem worth the
churn to require all extensions to change it.
Another sloppiness was the exception for "internal" background
workers. We checked that RegisterBackgroundWorker() was called during
shared_preload_libraries processing, or the background worker was an
internal one. That exception was made in commit 665d1fad99 to allow
postmaster to register the logical apply launcher in
ApplyLauncherRegister(). The way the check was written, it would not
complain if you registered an internal background worker in a regular
backend process. But it would complain if postmaster registered a
background worker defined in a shared library, outside
shared_preload_libraries processing. I think the correct rule is that
you can only register static background workers in the postmaster
process, and only before the bgworker shared memory array has been
initialized. Check for that more directly.
Reviewed-by: Thomas Munro
Discussion: https://www.postgresql.org/message-id/4f95c1fc-ad3c-7974-3a8c-6faa3931804c@iki.fi
The serialized representation of an internal aggregate state is a bytea
value. In each deserial function, in order to "receive" the bytea value
we appended it onto a short-lived StringInfoData using
appendBinaryStringInfo. This was a little wasteful as it meant having to
palloc memory, copy a (possibly long) series of bytes then later pfree
that memory. Instead of going to this extra trouble, we can just fake up
a StringInfoData and point the data directly at the bytea's payload. This
should help increase the performance of internal aggregate
deserialization.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAApHDvr=e-YOigriSHHm324a40HPqcUhSp6pWWgjz5WwegR=cQ@mail.gmail.com
1349d2790 added code to adjust the PlannerInfo.group_pathkeys so that
ORDER BY / DISTINCT aggregate functions could obtain pre-sorted inputs
to allow faster execution. That commit forgot to adjust the pathkeys in
create_agg_path(). Some code in there assumed that it was always fine
to make the AggPath's pathkeys the same as its subpath's. That seems to
have been ok up until 1349d2790, but since that commit adds pathkeys for
columns which are within the aggregate function, those columns won't be
available above the aggregate node. This can result in "could not find
pathkey item to sort" during create_plan().
The fix here is to strip off the additional pathkeys added by
adjust_group_pathkeys_for_groupagg(). It seems that the pathkeys here
will only ever be group_pathkeys, so all we need to do is check if the
length of the pathkey list is longer than the num_groupby_pathkeys and
get rid of the additional ones only if we see extras.
Reported-by: Justin Pryzby
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/ZQhYYRhUxpW3PSf9%40telsasoft.com
Backpatch-through: 16, where 1349d2790 was introduced
Going by c4a1933b4, b33ef397a and 05893712c (to name just a few), it seems
that maintaining debug_print_rel() is often forgotten. In the case of
c4a1933b4, it was several years before anyone noticed that a path type
was not handled by debug_print_rel(). (debug_print_rel() is only
compiled when building with OPTIMIZER_DEBUG).
After a quick survey on the pgsql-hackers mailing list, nobody came
forward to admit that they use OPTIMIZER_DEBUG. So to prevent any future
maintenance neglect, let's just remove debug_print_rel() and have
OPTIMIZER_DEBUG make use of pprint() instead (as suggested by Tom Lane).
If anyone wants to come forward to claim they make use of
OPTIMIZER_DEBUG in a way that they need debug_print_rel() then they have
around 10 months remaining in the v17 cycle where we could revert this.
If nobody comes forward in that time, then we can likely safely declare
debug_print_rel() as not worth keeping.
Discussion: https://postgr.es/m/CAApHDvoCdjo8Cu2zEZF4-AxWG-90S+pYXAnoDDa9J3xH-OrczQ@mail.gmail.com
Currently, B-tree code matches every scan key to every item on the page.
Imagine the ordered B-tree scan for the query like this.
SELECT * FROM tbl WHERE col > 'a' AND col < 'b' ORDER BY col;
The (col > 'a') scan key will be always matched once we find the location to
start the scan. The (col < 'b') scan key will match every item on the page
as long as it matches the last item on the page.
This patch implements prechecking of the scan keys required for directional
scan on beginning of page scan. If precheck is successful we can skip this
scan keys check for the items on the page. That could lead to significant
acceleration especially if the comparison operator is expensive.
Idea from patch by Konstantin Knizhnik.
Discussion: https://postgr.es/m/079c3f8e-3371-abe2-e93c-fc8a0ae3f571%40garret.ru
Reviewed-by: Peter Geoghegan, Pavel Borisov
BuildDescForRelation() main job is to convert ColumnDef lists to
pg_attribute/tuple descriptor arrays, which is really mostly an
internal subroutine of DefineRelation() and some related functions,
which is more the remit of tablecmds.c and doesn't have much to do
with the basic tuple descriptor interfaces in tupdesc.c. This is also
supported by observing the header includes we can remove in tupdesc.c.
By moving it over, we can also (in the future) make
BuildDescForRelation() use more internals of tablecmds.c that are not
sensible to be exposed in tupdesc.c.
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
Keep track of the used size of the array. That avoids looping through
the whole array in a few places. It doesn't matter from a performance
point of view since the array is small anyway, but this feels less
surprising and is a little less code. Now that we have an explicit
NumListenSockets variable that is statically initialized to 0, we
don't need the loop to initialize the array.
Allocate the array in PostmasterContext. The array isn't needed in
child processes, so this allows reusing that memory. We could easily
make the array resizable now, but we haven't heard any complaints
about the current 64 sockets limit.
Discussion: https://www.postgresql.org/message-id/7bb7ad65-a018-2419-742f-fa5fd877d338@iki.fi
Previously, the JSON code didn't have to worry too much about freeing
JsonLexContext, because it was never too long-lived. With new features
being added for SQL/JSON this is no longer the case. Add a routine
that knows how to free this struct and apply that to a few places, to
prevent this from becoming problematic.
At the same time, we change the API of makeJsonLexContextCstringLen to
make it receive a pointer to JsonLexContext for callers that want it to
be stack-allocated; it can also be passed as NULL to get the original
behavior of a palloc'ed one.
This also causes an ABI break due to the addition of flags to
JsonLexContext, so we can't easily backpatch it. AFAICS that's not much
of a problem; apparently some leaks might exist in JSON usage of
text-search, for example via json_to_tsvector, but I haven't seen any
complaints about that.
Per Coverity complaint about datum_to_jsonb_internal().
Discussion: https://postgr.es/m/20230808174110.oq3iymllsv6amkih@alvherre.pgsql
6b94e7a6d did this for ordered append paths to allow fast startup
MergeAppends, however, nothing was done for the Append case.
Here we adjust add_paths_to_append_rel() to have it build an AppendPath
containing the cheapest startup paths from each of the child relations
when the append rel has "consider_startup" set.
Author: Andy Fan, David Rowley
Discussion: https://www.postgresql.org/message-id/CAKU4AWrXSkUV=Pt-gRxQT7EbfUeNssprGyNsB=5mJibFZ6S3ww@mail.gmail.com
Ensure we switch to the per-tuple memory context to prevent any memory
leaks of detoasted Datums in MemoizeHash_hash() and MemoizeHash_equal().
Reported-by: Orlov Aleksej
Author: Orlov Aleksej, David Rowley
Discussion: https://postgr.es/m/83281eed63c74e4f940317186372abfd%40cft.ru
Backpatch-through: 14, where Memoize was added
It is unnecessary to include this field in IndexInfo. It is only used
by DDL code, not during execution. It is really only used to pass
local information around between functions in index.c and indexcmds.c,
for which it is clearer to use local variables, like in similar cases.
Discussion: https://www.postgresql.org/message-id/flat/f84640e3-00d3-5abd-3f41-e6a19d33c40b@eisentraut.org
In hopes of putting these where any would-be implementer is sure to
find them, make a placeholder grammar production for ALTER DROP VALUE
and put them there. This is really just a docs patch, though.
Vik Fearing, with a bit more wordsmithing by me
Discussion: https://postgr.es/m/9fffd149-da0f-0c9c-6745-731fb688642a@postgresfriends.org
This further reduces the length and complexity of sendFile(),
hopefully make it easier to understand and modify. In addition
to moving some logic into a new function, I took this opportunity
to make a few slight adjustments to sendFile() itself, including
renaming the 'len' variable to 'bytes_done', since we use it to represent
the number of bytes we've already handled so far, not the total
length of the file.
Patch by me, reviewed by David Steele.
Discussion: http://postgr.es/m/CA+TgmoYt5jXH4U6cu1dm9Oe2FTn1aae6hBNhZzJJjyjbE_zYig@mail.gmail.com
If checksum verification fails for a particular page, we reread the
page and try one more time. The code that does this somewhat complex
and difficult to follow. Move some of the logic into a new function
and rearrange the code a bit to try to make it clearer. This way,
we don't need the block_retry Boolean, a couple of other variables
move from sendFile() into the new function, and some code is now less
deeply indented.
Patch by me, reviewed by David Steele.
Discussion: http://postgr.es/m/CA+TgmoYt5jXH4U6cu1dm9Oe2FTn1aae6hBNhZzJJjyjbE_zYig@mail.gmail.com
The code in charge of copying the contents of PgBackendStatus to local
memory could fail on memory allocation because of an overflow on the
amount of memory to use. The overflow can happen when combining a high
value track_activity_query_size (max at 1MB) with a large
max_connections, when both multiplied get higher than INT32_MAX as both
parameters treated as signed integers. This could for example trigger
with the following functions, all calling pgstat_read_current_status():
- pg_stat_get_backend_subxact()
- pg_stat_get_backend_idset()
- pg_stat_get_progress_info()
- pg_stat_get_activity()
- pg_stat_get_db_numbackends()
The change to use MemoryContextAllocHuge() has been introduced in
8d0ddccec6, so backpatch down to 12.
Author: Jakub Wartak
Discussion: https://postgr.es/m/CAKZiRmw8QSNVw2qNK-dznsatQqz+9DkCquxP0GHbbv1jMkGHMA@mail.gmail.com
Backpatch-through: 12
Make a few newish calls to appendStringInfo() which have no special
formatting use appendStringInfoString() instead. Also, adjust usages of
appendStringInfoString() which only append a string containing a single
character to make use of appendStringInfoChar() instead.
This makes the code marginally faster, but primarily this change is so
we use the StringInfo type as it was intended to be used.
Discussion: https://postgr.es/m/CAApHDvpXKQmL+r=VDNS98upqhr9yGBhv2Jw3GBFFk_wKHcB39A@mail.gmail.com
This commit changes the WAL reader routines so as a FATAL for the
backend or exit(FAILURE) for the frontend is triggered if an allocation
for a WAL record decode fails in walreader.c, rather than treating this
case as bogus data, which would be equivalent to the end of WAL. The
key is to avoid palloc_extended(MCXT_ALLOC_NO_OOM) in walreader.c,
relying on plain palloc() calls.
The previous behavior could make WAL replay finish too early than it
should. For example, crash recovery finishing earlier may corrupt
clusters because not all the WAL available locally was replayed to
ensure a consistent state. Out-of-memory failures would show up
randomly depending on the memory pressure on the host, but one simple
case would be to generate a large record, then replay this record after
downsizing a host, as Ethan Mertz originally reported.
This relies on bae868caf2, as the WAL reader routines now do the
memory allocation required for a record only once its header has been
fully read and validated, making xl_tot_len trustable. Making the WAL
reader react differently on out-of-memory or bogus record data would
require ABI changes, so this is the safest choice for stable branches.
Also, it is worth noting that 3f1ce97346 has been using a plain
palloc() in this code for some time now.
Thanks to Noah Misch and Thomas Munro for the discussion.
Like the other commit, backpatch down to 12, leaving out v11 that will
be EOL'd soon. The behavior of considering a failed allocation as bogus
data comes originally from 0ffe11abd3, where the record length
retrieved from its header was not entirely trustable.
Reported-by: Ethan Mertz
Discussion: https://postgr.es/m/ZRKKdI5-RRlta3aF@paquier.xyz
Backpatch-through: 12
The retry loop is needed because heap_page_prune() calls
HeapTupleSatisfiesVacuum() and then lazy_scan_prune() does the same
thing again, and they might get different answers due to concurrent
clog updates. But this patch makes heap_page_prune() return the
HeapTupleSatisfiesVacuum() results that it computed back to the
caller, which allows lazy_scan_prune() to avoid needing to recompute
those values in the first place. That's nice both because it eliminates
the need for a retry loop and also because it's cheaper.
Melanie Plageman, reviewed by David Geier, Andres Freund, and me.
Discussion: https://postgr.es/m/CAAKRu_br124qsGJieuYA0nGjywEukhK1dKBfRdby_4yY3E9SXA%40mail.gmail.com
This adjusts the expression evaluation code for CoerceViaIO and
CoerceToDomain to handle errors softly if needed.
For CoerceViaIo, this means using InputFunctionCallSafe(), which
provides the option to handle errors softly, instead of calling the
type input function directly.
For CoerceToDomain, this simply entails replacing the ereport() in
ExecEvalConstraintCheck() by errsave().
In both cases, the ErrorSaveContext to be used when evaluating the
expression is stored by ExecInitExprRec() in the expression's struct
in the expression's ExprEvalStep. The ErrorSaveContext is passed by
setting ExprState.escontext to point to it when calling
ExecInitExprRec() on the expression whose errors are to be handled
softly.
Note that no call site of ExecInitExprRec() has been changed in this
commit, so there's no functional change. This is intended for
implementing new SQL/JSON expression nodes in future commits that
will use to it suppress errors that may occur during type coercions.
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
After receiving position data for a lexeme, tsvectorrecv()
advanced its "datalen" value by (npos+1)*sizeof(WordEntry)
where the correct calculation is (npos+1)*sizeof(WordEntryPos).
This accidentally failed to render the constructed tsvector
invalid, but it did result in leaving some wasted space
approximately equal to the space consumed by the position data.
That could have several bad effects:
* Disk space is wasted if the received tsvector is stored into a
table as-is.
* A legal tsvector could get rejected with "maximum total lexeme
length exceeded" if the extra space pushes it over the MAXSTRPOS
limit.
* In edge cases, the finished tsvector could be assigned a length
larger than the allocated size of its palloc chunk, conceivably
leading to SIGSEGV when the tsvector gets copied somewhere else.
The odds of a field failure of this sort seem low, though valgrind
testing could probably have found this.
While we're here, let's express the calculation as
"sizeof(uint16) + npos * sizeof(WordEntryPos)" to avoid the type
pun implicit in the "npos + 1" formulation. It's not wrong
given that WordEntryPos had better be 2 bytes to avoid padding
problems, but it seems clearer this way.
Report and patch by Denis Erokhin. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/009801d9f2d9$f29730c0$d7c59240$@datagile.ru
In recent releases, such cases fail with "cache lookup failed for
function 0" rather than complaining that the conversion function
doesn't exist as prior versions did. Seems to be a consequence of
sloppy refactoring in commit f82de5c46. Add the missing error check.
Per report from Pierre Fortin. Back-patch to v14 where the
oversight crept in.
Discussion: https://postgr.es/m/20230929163739.3bea46e5.pfortin@pfortin.com
Commit 9f8377f7a2 was a little too eager in fetching default values.
Normally this would not matter, but if the default value is not valid
for the type (e.g. a varchar that's too long) it caused an unnecessary
error.
Complaint and fix from Laurenz Albe
Backpatch to release 16.
Discussion: https://postgr.es/m/75a7b7483aeb331aa017328d606d568fc715b90d.camel@cybertec.at
These options already exist, but you need to specify a column list for
them, which can be cumbersome. We already have the possibility of all
columns for FORCE QUOTE, so this is simply extending that facility to
FORCE_NULL and FORCE_NOT_NULL.
Author: Zhang Mingli
Reviewed-By: Richard Guo, Kyatoro Horiguchi, Michael Paquier.
Discussion: https://postgr.es/m/CACJufxEnVqzOFtqhexF2+AwOKFrV8zHOY3y=p+gPK6eB14pn_w@mail.gmail.com
ANALYZE on a table with inheritance children analyzes all the child
tables in a loop. When stepping to next child table, it updated the
child rel ID value in the command progress stats, but did not reset
the 'sample_blks_total' and 'sample_blks_scanned' counters.
acquire_sample_rows() updates 'sample_blks_total' as soon as the scan
starts and 'sample_blks_scanned' after processing the first block, but
until then, pg_stat_progress_analyze would display a bogus combination
of the new child table relid with old counter values from the
previously processed child table. Fix by resetting 'sample_blks_total'
and 'sample_blks_scanned' to zero at the same time that
'current_child_table_relid' is updated.
Backpatch to v13, where pg_stat_progress_analyze view was introduced.
Reported-by: Justin Pryzby
Discussion: https://www.postgresql.org/message-id/20230122162345.GP13860%40telsasoft.com
Under some circumstances, concurrent MERGE operations could lead to
inconsistent results, that varied according the plan chosen. This was
caused by a lack of rowmarks on the source relation, which meant that
EvalPlanQual rechecking was not guaranteed to return the same source
tuples when re-running the join query.
Fix by ensuring that preprocess_rowmarks() sets up PlanRowMarks for
all non-target relations used in MERGE, in the same way that it does
for UPDATE and DELETE.
Per bug #18103. Back-patch to v15, where MERGE was introduced.
Dean Rasheed, reviewed by Richard Guo.
Discussion: https://postgr.es/m/18103-c4386baab8e355e3%40postgresql.org
Improve find_base_rel() and find_base_rel_ignore_join() so that they
raise an ERROR if they ever receive a negative relid value in
non-cassert builds. If either of these functions had ever received a
negative relid then they'd have attempted to access memory that does not
belong to simple_rel_array.
Because no evidence has been presented of actual cases where bugs have
caused this to happen, here we take a lightweight approach to checking
for negative values and simply cast both values to uint32 before
performing the comparison. This will cause any negative relids to be
seen as greater than simple_rel_array_size which will ERROR rather than
attempt to access a negative simple_rel_array element. Obviously, the
run-time error is better than a crash, so it makes sense to protect
against this, especially when it can be done without adding any
additional run-time overhead.
There is a slight change here if the functions are ever called with a
relid of 0. This will pass the bounds check, but that array entry
should be NULL (along with the corresponding simple_rte_array entry), so
won't pass the "if (rel)" condition and still fall through and raise an
ERROR.
Author: Ranier Vilela
Reviewed-by: Ashutosh Bapat, David Rowley
Discussion: https://postgr.es/m/CAEudQArQSghBu2gLojg4o_tnHj_x2HcS%3D%2BwewL3NJS8z0VnK%2Bg%40mail.gmail.com
nbtree's mark/restore processing failed to correctly handle an edge case
involving array key advancement and related search-type scan key state.
Scans with ScalarArrayScalarArrayOpExpr quals requiring mark/restore
processing (for a merge join) could incorrectly conclude that an
affected array/scan key must not have advanced during the time between
marking and restoring the scan's position.
As a result of all this, array key handling within btrestrpos could skip
a required call to _bt_preprocess_keys(). This confusion allowed later
primitive index scans to overlook tuples matching the true current array
keys. The scan's search-type scan keys would still have spurious values
corresponding to the final array element(s) -- not values matching the
first/now-current array element(s).
To fix, remember that "array key wraparound" has taken place during the
ongoing btrescan in a flag variable stored in the scan's state, and use
that information at the point where btrestrpos decides if another call
to _bt_preprocess_keys is required.
Oversight in commit 70bc5833, which taught nbtree to handle array keys
during mark/restore processing, but missed this subtlety. That commit
was itself a bug fix for an issue in commit 9e8da0f7, which taught
nbtree to handle ScalarArrayOpExpr quals natively.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkgP3DDRJxw6DgjCxo-cu-DKrvjEv_ArkP2ctBJatDCYg@mail.gmail.com
Backpatch: 11- (all supported branches).
This code was sloppy about comparison of index columns that
are expressions. It didn't reliably reject cases where one
index has an expression where the other has a plain column,
and it could index off the start of the attmap array, leading
to a Valgrind complaint (though an actual crash seems unlikely).
I'm not sure that the expression-vs-column sloppiness leads
to any visible problem in practice, because the subsequent
comparison of the two expression lists would reject cases
where the indexes have different numbers of expressions
overall. Maybe we could falsely match indexes having the
same expressions in different column positions, but it'd
require unlucky contents of the word before the attmap array.
It's not too surprising that no problem has been reported
from the field. Nonetheless, this code is clearly wrong.
Per bug #18135 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/18135-532f4a755e71e4d2@postgresql.org
Previously, one of the values in the struct was returned as the return
value, and another was returned via an output parameter. In
preparation for returning more stuff, consolidate both values into a
struct returned via an output parameter.
Melanie Plageman, reviewed by Andres Freund and by me.
Discussion: https://postgr.es/m/CAAKRu_br124qsGJieuYA0nGjywEukhK1dKBfRdby_4yY3E9SXA%40mail.gmail.com
Tid Range scans were added back in bb437f995. That commit forgot to add
handling for TidRangePaths in print_path().
Only people building with OPTIMIZER_DEBUG might have noticed this, which
likely is the reason it's taken 4 years for anyone to notice.
Author: Andrey Lepikhov
Reported-by: Andrey Lepikhov
Discussion: https://postgr.es/m/379082d6-1b6a-4cd6-9ecf-7157d8c08635@postgrespro.ru
Backpatch-through: 14, where bb437f995 was introduced
This commit removes unnecessary ExecExprFreeContext() calls in
ExecEnd* routines because the actual cleanup is managed by
FreeExecutorState(). With no callers remaining for
ExecExprFreeContext(), this commit also removes the function.
This commit also drops redundant ExecClearTuple() calls, because
ExecResetTupleTable() in ExecEndPlan() already takes care of
resetting and dropping all TupleTableSlots initialized with
ExecInitScanTupleSlot() and ExecInitExtraTupleSlot().
After these modifications, the ExecEnd*() routines for ValuesScan,
NamedTuplestoreScan, and WorkTableScan became redundant. So, this
commit removes them.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
"in_streaming" is a flag used to track if an instance of pgoutput is
streaming changes. When pgoutput is started, the flag was always reset,
switched it back and forth in the stream start/stop callbacks.
Before this commit, it was a global variable, which is confusing as it
is actually attached to a state of PGOutputData. Per my analysis, using
a global variable did not lead to an active bug like in 54ccfd6586,
but it makes the code more consistent. Note that we cannot backpatch
this change anyway as it requires the addition of a new field to
PGOutputData, exposed in pgoutput.h.
Author: Hou Zhijie
Reviewed-by: Amit Kapila, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/OS0PR01MB571690EF24F51F51EFFCBB0E94FAA@OS0PR01MB5716.jpnprd01.prod.outlook.com
This unifies some repetitive code.
Note: I didn't push the "not found" error message into the new
function, even though all existing callers would be able to make use
of it. Using the existing error handling as-is would probably require
exposing the Relation type via tupdesc.h, which doesn't seem
desirable. (Or even if we changed it to just report the OID, it would
inject the concept of a relation containing the tuple descriptor into
tupdesc.h, which might be a layering violation. Perhaps some further
improvements could be considered here separately.)
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da%40eisentraut.org
When performing inlining LLVM unfortunately "leaks" types (the
types survive and are usable, but a new round of inlining will
recreate new structurally equivalent types). This accumulation
will over time amount to a memory leak which for some queries
can be large enough to trigger the OOM process killer.
To avoid accumulation of types, all IR related data is stored
in an LLVMContextRef which is dropped and recreated in order
to release all types. Dropping and recreating incurs overhead,
so it will be done only after 100 queries. This is a heuristic
which might be revisited, but until we can get the size of the
context from LLVM we are flying a bit blind.
This issue has been reported several times, there may be more
references to it in the archives on top of the threads linked
below.
Backpatching of this fix will be handled once it has matured
in master for a bit.
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Reported-By: Kurt Roeckx <kurt@roeckx.be>
Reported-By: Jaime Casanova <jcasanov@systemguards.com.ec>
Reported-By: Lauri Laanmets <pcspets@gmail.com>
Author: Andres Freund and Daniel Gustafsson
Discussion: https://postgr.es/m/7acc8678-df5f-4923-9cf6-e843131ae89d@www.fastmail.com
Discussion: https://postgr.es/m/20201218235607.GC30237@telsasoft.com
Discussion: https://postgr.es/m/CAPH-tTxLf44s3CvUUtQpkDr1D8Hxqc2NGDzGXS1ODsfiJ6WSqA@mail.gmail.com
Commit b059d2f456 introduced llvm_types_module and accidentally
exported it. As there is no usecase for accessing this variable
externally, this makes it static.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20221101055132.pjjsvlkeo4stbjkq@awork3.anarazel.de
The pgoutput module uses a global variable (publish_no_origin) to cache
the action for the origin filter, but we didn't reset the flag when
shutting down the output plugin, so subsequent retries may access the
previous publish_no_origin value.
We fix this by storing the flag in the output plugin's private data.
Additionally, the patch removes the currently unused origin string from the
structure.
For the back branch, to avoid changing the exposed structure, we eliminated the
global variable and instead directly used the origin string for change
filtering.
Author: Hou Zhijie
Reviewed-by: Amit Kapila, Michael Paquier
Backpatch-through: 16
Discussion: http://postgr.es/m/OS0PR01MB571690EF24F51F51EFFCBB0E94FAA@OS0PR01MB5716.jpnprd01.prod.outlook.com
Tom Lane
Peter Eisentraut
Jeff Davis
Michael Paquier
Robert Haas
Nathan Bossart
Alexander Korotkov
Noah Misch
Andrew Dunstan
David Rowley
Amit Kapila
Bruce Momjian
Tomas Vondra
Heikki Linnakangas
John Naylor
Dean Rasheed
Masahiko Sawada
Thomas Munro
Alvaro Herrera
Daniel Gustafsson
Peter Geoghegan
Andres Freund
Etsuro Fujita
Amit Langote