per pghackers discussion. Add some more typsanity tests, and clean
up some problems exposed thereby (broken or missing array types for
some built-in types). Also, clean up loose ends from unknownin/out
patch.
looking for places that assume UNKNOWN == TEXT. One of those was the
"SET" type in pg_type.h, which was using textin/textout. This one I took
care of in this patch. The other suspicious place was in
string_to_dataum (which is defined in both selfuncs.c and indxpath.c). I
wasn't too sure about those, so I left them be.
Joe Conway
Use "--enable-integer-datetimes" in configuration to use this rather
than the original float8 storage. I would recommend the integer-based
storage for any platform on which it is available. We perhaps should
make this the default for the production release.
Change timezone(timestamptz) results to return timestamp rather than
a character string. Formerly, we didn't have a way to represent
timestamps with an explicit time zone other than freezing the info into
a string. Now, we can reasonably omit the explicit time zone from the
result and return a timestamp with values appropriate for the specified
time zone. Much cleaner, and if you need the time zone in the result
you can put it into a character string pretty easily anyway.
Allow fractional seconds in date/time types even for dates prior to 1BC.
Limit timestamp data types to 6 decimal places of precision. Just right
for a micro-second storage of int8 date/time types, and reduces the
number of places ad-hoc rounding was occuring for the float8-based types.
Use lookup tables for precision/rounding calculations for timestamp and
interval types. Formerly used pow() to calculate the desired value but
with a more limited range there is no reason to not type in a lookup
table. Should be *much* better performance, though formerly there were
some optimizations to help minimize the number of times pow() was called.
Define a HAVE_INT64_TIMESTAMP variable. Based on the configure option
"--enable-integer-datetimes" and the existing internal INT64_IS_BUSTED.
Add explicit date/interval operators and functions for addition and
subtraction. Formerly relied on implicit type promotion from date to
timestamp with time zone.
Change timezone conversion functions for the timetz type from "timetz()"
to "timezone()". This is consistant with other time zone coersion
functions for other types.
Bump the catalog version to 200204201.
Fix up regression tests to reflect changes in fractional seconds
representation for date/times in BC eras.
All regression tests pass on my Linux box.
different privilege bits (might as well make use of the space we were
wasting on padding). EXECUTE and USAGE bits for procedures, languages
now are separate privileges instead of being overlaid on SELECT. Add
privileges for namespaces and databases. The GRANT and REVOKE commands
work for these object types, but we don't actually enforce the privileges
yet...
(tgrelid, tgname). This provides an additional check on trigger name
uniqueness per-table (which was already enforced by the code anyway).
With this change, RelationBuildTriggers will read the triggers in
order by tgname, since it's scanning using this index. Since a
predictable trigger ordering has been requested for some time, document
this behavior as a feature. Also document that rules fire in name
order, since yesterday's changes to pg_rewrite indexing cause that too.
DROP RULE and COMMENT ON RULE syntax adds an 'ON tablename' clause,
similar to TRIGGER syntaxes. To allow loading of existing pg_dump
files containing COMMENT ON RULE, the COMMENT code will still accept
the old syntax --- but only if the target rulename is unique across
the whole database.
an 'opclass owner' column in pg_opclass. Nothing is done with it at
present, but since there are plans to invent a CREATE OPERATOR CLASS
command soon, we'll probably want DROP OPERATOR CLASS too, which
suggests that a notion of ownership would be a good idea.
qualified operator names directly, for example CREATE OPERATOR myschema.+
( ... ). To qualify an operator name in an expression you need to write
OPERATOR(myschema.+) (thanks to Peter for suggesting an escape hatch).
I also took advantage of having to reformat pg_operator to fix something
that'd been bugging me for a while: mergejoinable operators should have
explicit links to the associated cross-data-type comparison operators,
rather than hardwiring an assumption that they are named < and >.
entries, per pghackers discussion. This fixes aggregates to live in
namespaces, and also simplifies/speeds up lookup in parse_func.c.
Also, add a 'proimplicit' flag to pg_proc that controls whether a type
coercion function may be invoked implicitly, or only explicitly. The
current settings of these flags are more permissive than I would like,
but we will need to debate and refine the behavior; for now, I avoided
breaking regression tests as much as I could.
volatile), rather than the old cachable/noncachable distinction. This
allows indexscan optimizations in many places where we formerly didn't.
Also, add a pronamespace column to pg_proc (it doesn't do anything yet,
however).
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
depend on this rather than the trigger argument strings to locate the
other relation to test. This makes RI triggers function properly in
the presence of schemas and temp tables. Along the way, fix bogus lack
of locking in RI triggers, handle quoting of names fully correctly,
compute required sizes of query buffers with some semblance of accuracy.
path. The default behavior if no per-user schemas are created is that
all users share a 'public' namespace, thus providing behavior backwards
compatible with 7.2 and earlier releases. Probably the semantics and
default setting will need to be fine-tuned, but this is a start.
catalog namespace. This will not do as a production solution because
the interpretation of RI trigger arguments will vary depending on the
current namespace search path. I'm just putting it in so that the RI
regression tests don't fail while schema development proceeds. We
must find a better answer before 7.3 can be released.
sequence functions how to cope with qualified names. Same code is
also used for int4notin, currtid_byrelname, pgstattuple. Also,
move TOAST tables into special pg_toast namespace.
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
addRangeTableEntry calls. Remove relname field from RTEs, since
it will no longer be a useful unique identifier of relations;
we want to encourage people to rely on the relation OID instead.
Further work on dumping qual expressions in EXPLAIN, too.
objects to be privilege-checked. Some change in their APIs would be
necessary no matter what in the schema environment, and simply getting
rid of the name-based interface entirely seems like the best way.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
* We should not even consider checking the row if it is no longer
* valid since it was either deleted (doesn't matter) or updated
* (in which case it'll be checked with its final values).
Stephan Szabo
before a data item is now always skipped, rather than only sometimes.
Backslashes not within double-quoted text are treated reasonably, as
are multiple sequences of quoted text in a single data item. But it
still seems rather prone to misbehavior if the input is not completely
syntactically correct --- in particular, garbage following a right brace
will be ignored.
now has an RTE of its own, and references to its outputs now are Vars
referencing the JOIN RTE, rather than CASE-expressions. This allows
reverse-listing in ruleutils.c to use the correct alias easily, rather
than painfully reverse-engineering the alias namespace as it used to do.
Also, nested FULL JOINs work correctly, because the result of the inner
joins are simple Vars that the planner can cope with. This fixes a bug
reported a couple times now, notably by Tatsuo on 18-Nov-01. The alias
Vars are expanded into COALESCE expressions where needed at the very end
of planning, rather than during parsing.
Also, beginnings of support for showing plan qualifier expressions in
EXPLAIN. There are probably still cases that need work.
initdb forced due to change of stored-rule representation.
PostgreSQL. This hash function replaces the one used by hash indexes and
the catalog cache. Hash joins use a different, relatively poor-quality
hash function, but I'll fix that later.
As suggested by Tom Lane, this patch also changes the size of the fixed
hash table used by the catalog cache to be a power-of-2 (instead of a
prime: I chose 256 instead of 257). This allows the catcache to lookup
hash buckets using a simple bitmask. This should improve the performance
of the catalog cache slightly, since the previous method (modulo a
prime) was slow.
In my tests, this improves the performance of hash indexes by between 4%
and 8%; the performance when using btree indexes or seqscans is
basically unchanged.
Neil Conway <neilconway@rogers.com>
- domain.patch -> source patch against pgsql in cvs
- drop_domain.sgml and create_domain.sgml -> New doc/src/sgml/ref docs
- dominfo.txt -> basic domain related queries I used for testing
[ ADDED TO /doc]
Enables domains of array elements -> CREATE DOMAIN dom int4[3][2];
Uses a typbasetype column to describe the origin of the domain.
Copies data to attnotnull rather than processing in execMain().
Some documentation differences from earlier.
If this is approved, I'll start working on pg_dump, and a \dD <domain>
option in psql, and regression tests. I don't really feel like doing
those until the system table structure settles for pg_type.
CHECKS when added, will also be copied to to the table attributes. FK
Constraints (if I ever figure out how) will be done similarly. Both
will lbe handled by MergeDomainAttributes() which is called shortly
before MergeAttributes().
Rod Taylor
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
> > > > It was made to cope with encoding such as an Asian bloc in 7.2Beta2.
> > > >
> > > > Added ServerEncoding
> > > > Korean (JOHAB), Thai (WIN874),
> > > > Vietnamese (TCVN), Arabic (WIN1256)
> > > >
> > > > Added ClientEncoding
> > > > Simplified Chinese (GBK), Korean (UHC)
> > > >
> > > >
> > > >
> http://www.sankyo-unyu.co.jp/Pool/postgresql-7.2b2.newencoding.diff.tar.gz
> > > > (608K)
> > >
> > > Looks good. I need some people to review this for me.
> >
> > For me they look good too. The only missing part is a
> > documentation. I will ask him to write it up. If he couldn't, I will
> > do it for him.
> > > The diff is 3mb
> > > but appears to address only additions to multibyte. I have attached a
> > > list of files it modifies. Also, look at the sizes of the mb/
> > > directory. It is getting large:
> > >
> > > 4 ./CVS
> > > 6 ./Unicode/CVS
> > > 3433 ./Unicode
> > > 6197 .
> >
> > Yes. We definitely need the on-the-fly encoding addition capability:
> > i.e. CREATE CHRACTER SET in the future...
> > --
> > Tatsuo Ishii
> >
> >
Address chainge.
http://www.sankyo-unyu.co.jp/Pool/postgresql-7.2.newencoding.diff.gz
Add PsqlODBC and document ...etc patch.
Eiji Tokuya
(current as of a few hours ago.)
This patch:
1. Adds PG_GETARG_xxx_P_SLICE() macros and associated support routines.
2. Adds routines in src/backend/access/tuptoaster.c for fetching only
necessary chunks of a toasted value. (Modelled on latest changes to
assume chunks are returned in order).
3. Amends text_substr and bytea_substr to use new methods. It now
handles multibyte cases -and should still lead to a performance
improvement in the multibyte case where the substring is near the
beginning of the string.
4. Added new command: ALTER TABLE tabname ALTER COLUMN colname SET
STORAGE {PLAIN | EXTERNAL | EXTENDED | MAIN} to parser and documented in
alter-table.sgml. (NB I used ColId as the item type for the storage
mode string, rather than a new production - I hope this makes sense!).
All this does is sets attstorage for the specified column.
4. AlterTableAlterColumnStatistics is now AlterTableAlterColumnFlags and
handles both statistics and storage (it uses the subtype code to
distinguish). The previous version of my patch also re-arranged other
code in backend/commands/command.c but I have dropped that from this
patch.(I plan to return to it separately).
5. Documented new macros (and also the PG_GETARG_xxx_P_COPY macros) in
xfunc.sgml. ref/alter_table.sgml also contains documentation for ALTER
COLUMN SET STORAGE.
John Gray
timestamp/timestamptz combo. Now extract/date_part returns
seconds*1000 or 1000000 + fraction part as the manual stats.
regression test are also fixed.
See the thread in pgsql-hackers:
Subject: Re: [HACKERS] timestamp_part() bug?
Date: Sat, 02 Mar 2002 11:29:53 +0900
when to send what to which, prevent recursion by introducing new COMMERROR
elog level for client-communication problems, get rid of direct writes
to stderr in backend/libpq files, prevent non-error elogs from going to
client during the authentication cycle.
speed up repetitive failed searches; per pghackers discussion in late
January. inval.c logic substantially simplified, since we can now treat
inserts and deletes alike as far as inval events are concerned. Some
repair work needed in heap_create_with_catalog, which turns out to have
been doing CommandCounterIncrement at a point where the new relation has
non-self-consistent catalog entries. With the new inval code, that
resulted in assert failures during a relcache entry rebuild.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
both input streams to the end. If one variable's range is much less
than the other, an indexscan-based merge can win by not scanning all
of the other table. Per example from Reinhard Max.
are now both invoked once per received SQL command (raw parsetree) from
pg_exec_query_string. BeginCommand is actually just an empty routine
at the moment --- all its former operations have been pushed into tuple
receiver setup routines in printtup.c. This makes for a clean distinction
between BeginCommand/EndCommand (once per command) and the tuple receiver
setup/teardown routines (once per ExecutorRun call), whereas the old code
was quite ad hoc. Along the way, clean up the calling conventions for
ExecutorRun a little bit.
hashname() and reduce the penalty incured when NAMEDATALEN is increased.
I posted this to -hackers a couple days ago, and there haven't been any
major complaints. It passes the regression tests. See -hackers for more
discussion, as well as the suggestion from Tom Lane on which this patch
is based.
Unless anyone sees any problems, please apply for 7.3.
Cheers,
Neil Conway
Improve 'pg_internal.init' relcache entry preload mechanism so that it is
safe to use for all system catalogs, and arrange to preload a realistic
set of system-catalog entries instead of only the three nailed-in-cache
indexes that were formerly loaded this way. Fix mechanism for deleting
out-of-date pg_internal.init files: this must be synchronized with transaction
commit, not just done at random times within transactions. Drive it off
relcache invalidation mechanism so that no special-case tests are needed.
Cache additional information in relcache entries for indexes (their pg_index
tuples and index-operator OIDs) to eliminate repeated lookups. Also cache
index opclass info at the per-opclass level to avoid repeated lookups during
relcache load.
Generalize 'systable scan' utilities originally developed by Hiroshi,
move them into genam.c, use in a number of places where there was formerly
ugly code for choosing either heap or index scan. In particular this allows
simplification of the logic that prevents infinite recursion between syscache
and relcache during startup: we can easily switch to heapscans in relcache.c
when and where needed to avoid recursion, so IndexScanOK becomes simpler and
does not need any expensive initialization.
Eliminate useless opening of a heapscan data structure while doing an indexscan
(this saves an mdnblocks call and thus at least one kernel call).
originally created with, so that the set of visible tuples does not
change as a result of other activity. This essentially makes PG cursors
INSENSITIVE per the SQL92 definition. See bug report of 13-Feb-02.
mess up after an aborted VACUUM FULL, per today's pghackers discussion.
Add a suitable HeapTupleSatisfiesToast routine. Remove useless special-
case test in HeapTupleSatisfiesVisibility macro for xmax =
BootstrapTransactionId; perhaps that was needed at one time, but it's
a waste of cycles now, not to mention actively wrong for SnapshotAny.
Along the way, add some much-needed comments to tqual.c, and simplify
toast_fetch_datum, which no longer needs to assume it may see chunks
out-of-order.
This saves one open file descriptor per backend, and avoids an
annoying NOTICE on Cygwin (which has trouble deleting open files).
Bug appears to date back to original coding of init_irels, circa 1992.
Thanks to Bruce for spotting it and Tom Lane for diagnosing it.
Since horology test output is changing anyway, add some date/time input
tests to horology.sql. Some of these should move to the tests for the
individual data types, and we perhaps should add an entire new test
for "timezone" to allow manipulating the current time zone without
risking damage to the results of other tests.
as either HEAP_XMAX_COMMITTED or HEAP_XMAX_INVALID once the updating
transaction is gone. Otherwise some other transaction may come along
and try to test the commit status of t_xmax later --- which could be
after VACUUM has recycled the CLOG status for that xact. Bug introduced
in post-beta4 bug fix.
Fixes time zone problems introduced by Thomas' implementation of
TIMESTAMP WITHOUT TIME ZONE which caused the behavior of the previously
appropriate routine, timestamp_date(), to change for the worse in this
context.
cases which should have worked but did not.
Now supports julian day (J2452271), ISO time labels (T040506) and various
combinations of spaces and run-togethers of dates, times, and time zones.
All regression tests pass, and I have more tests to add after the 7.2
release (don't want to require changes to the ancillary horology result
files until after then).
machines. I have just been observing some scenarios where set_ps_display
accounts for more than 10% of the backend CPU, and this loop has to be
the reason.
remove brain-dead rule that double quotes are needed if and only if the
datatype is pass-by-reference; neither direction of the implication holds
water. Instead, examine the actual data string to see if it contains
any characters that force us to quote it.
Add some documentation about quoting of array values, which was previously
explained nowhere AFAICT.
per bug report from Stefan Hadjistoytchev. There are some cases
where the dot notation works, but there are more where it doesn't.
Eventually ought to consider fixing the parser to allow cases like
func().field, but for now this is the simplest patch.
search lists was broken in such a way that only the most recent
instance of a given hash code would ever be searched, thus possibly
missing longer matches further back. Fixing this gave 5 to 10%
compression improvement on some text test cases. Additional small
tweaks to improve speed of inner loops a little bit. There is no
compatibility issue created by this change, since the compressed data
format and decompression algorithm don't change.
This seems the right thing for most usages, but I notice two places
where it is the wrong thing. One is that the default permissions on
TOAST rels should be no-access, not world-readable; the other is that
PrepareForTupleInvalidation doesn't really need to spend time looking
at tuples of TOAST relations.
bpchar, bit, numeric with typmod -1. Alter format_type so that this
representation is printed when the typmod is -1. This ensures that
tables having such columns can be pg_dump'd and reloaded correctly.
Also, remove the rather useless and non-SQL-compliant default
precision and scale for type NUMERIC. A numeric column declared as
such (with no precision/scale) will now have typmod -1 which means
that numeric values of any precision/scale can be stored in it,
without conversion to a uniform scale. This seems significantly
more useful than the former behavior. Part of response to bug #513.
used inside fk constraints, since some of the checks
in the trigger did a SELECT oid. Since the oid wasn't
actually used, I changed this to SELECT 1. My test
case with non-oid tables now works and fk regression
appears to run fine on my machine.
Stephan Szabo
recreated since the start of our transaction, our first reference to it
errored out because we'd try to reuse our old relcache entry for it.
Do this by accepting SI inval messages just before relcache search in
heap_openr, so that dead relcache entries will be flushed before we
search. Also, break heap_open/openr into two pairs of routines,
relation_open(r) and heap_open(r). The relation_open routines make
no tests on relkind and so can be used to open anything that has a
pg_class entry. The heap_open routines are wrappers that add a relkind
test to preserve their established behavior. Use the relation_open
routines in several places that had various kluge solutions for opening
rels that might be either heap or index rels.
Also, remove the old 'heap stats' code that's been superseded by Jan's
stats collector, and clean up some inconsistencies in error reporting
between the different types of ALTER TABLE.
environment strings need to be moved around, do so when called from
initial startup (main.c), not in init_ps_status. This eliminates the
former risk of invalidating saved environment-string pointers, since
no code has yet had a chance to grab any such pointers when main.c
is running.
in .:/home/postgres/testversion/bin:/opt/perl5.6.1/bin:/home/postgres/bin:/usr/local/bin:/usr/bin:/opt/ansic/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/nettladm/bin:/opt/pd/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/upgrade/bin:/opt/CC/bin:/opt/langtools/bin:/opt/graphics/phigs/bin:/opt/java/bin:/bin:/opt/imake/bin:/opt/hparray/bin:/opt/aCC/bin:/opt/lrom/bin:/usr/local/nmh/bin:. (I suppose the only common case for this is '.').
per suggestion from Peter. Simplify several APIs by transmitting the
original argv location directly from main.c to ps_status.c, instead of
passing it down through several levels of subroutines.
Mask both typmod subfields for INTERVAL to avoid setting the high bit,
per dire warning from Tom Lane.
Clear tmask for DTK_ISO_TIME case to avoid time zone troubles.
Symptom reported by Tom Lane.
Clean up checking for valid time zone info in output routine.
This should now work for both SQL99 and Unix-style time zones.
Put in explicit check for INTERVAL() typmod rounding to avoid accumulating
cruft in the lower bits. Not sure that this helps, but we'll need to do
something. The symptom is visible with a query like
select interval(2) '10000 days 01:02:03.040506';
Regression tests are patched to repair the Tom Lane symptom, and all pass.
subprocesses; perhaps this will fix portability problem just noted by
Lockhart. Also, move test for bad permissions of DataDir to a more
logical place.
bootstrap) check for a valid PG_VERSION file before looking at anything
else in the data directory. This fixes confusing error report when
trying to start current sources in a pre-7.1 data directory.
Per trouble report from Rich Shepard 10/18/01.
Modified the parser and the SET handlers to use full Node structures
rather than simply a character string argument.
Implement INTERVAL() YEAR TO MONTH (etc) syntax per SQL99.
Does not yet accept the goofy string format that goes along with, but
this should be fairly straight forward to fix now as a bug or later
as a feature.
Implement precision for the INTERVAL() type.
Use the typmod mechanism for both of INTERVAL features.
Fix the INTERVAL syntax in the parser:
opt_interval was in the wrong place.
INTERVAL is now a reserved word, otherwise we get reduce/reduce errors.
Implement an explicit date_part() function for TIMETZ.
Should fix coersion problem with INTERVAL reported by Peter E.
Fix up some error messages for date/time types.
Use all caps for type names within message.
Fix recently introduced side-effect bug disabling 'epoch' as a recognized
field for date_part() etc. Reported by Peter E. (??)
Bump catalog version number.
Rename "microseconds" current transaction time field
from ...Msec to ...Usec. Duh!
date/time regression tests updated for reference platform, but a few
changes will be necessary for others.
side encoding name. This is necessary for client API's such as JDBC
to perform correct encoding conversions. See my email "[HACKERS]
pg_client_encoding" 10 Sep 2001.
lookup info in the relcache for index access method support functions.
This makes a huge difference for dynamically loaded support functions,
and should save a few cycles even for built-in ones. Also tweak dfmgr.c
so that load_external_function is called only once, not twice, when
doing fmgr_info for a dynamically loaded function. All per performance
gripe from Teodor Sigaev, 5-Oct-01.
readability. Bizarre '(long *) TRUE' return convention is gone,
in favor of just raising an error internally in dynahash.c when
we detect hashtable corruption. HashTableWalk is gone, in favor
of using hash_seq_search directly, since it had no hope of working
with non-LONGALIGNable datatypes. Simplify some other code that was
made undesirably grotty by promixity to HashTableWalk.
-infinity and +infinity. Put TIMESTAMP_NOT_FINITE guard into the routine,
instead of forgetting it at some call sites. Fixes regression test
failures here.
time zones.
SQL99 spec requires a default of zero (round to seconds) which is set
in gram.y as typmod is set in the parse tree. We *could* change to a
default of either 6 (for internal compatibility with previous versions)
or 2 (for external compatibility with previous versions).
Evaluate entries in pg_proc wrt the iscachable attribute for timestamp and
other date/time types. Try to recognize cases where side effects like the
current time zone setting may have an effect on results to decide whether
something is cachable or not.
it to suppress index opclass output for opclasses that are the default
for their datatype; only non-default opclasses are shown explicitly.
This is expected to improve portability of the CREATE INDEX command
across future versions of Postgres --- we've changed index opclasses
too often in the past to think we won't do so again.
portability issues). Caller-visible data structures are now allocated
on MAXALIGN boundaries, allowing safe use of datatypes wider than 'long'.
Rejigger hash_create API so that caller specifies size of key and
total size of entry, not size of key and size of rest of entry.
This simplifies life considerably since each number is just a sizeof(),
and padding issues etc. are taken care of automatically.
from the config file, so that these changes will propagate to backends
started later. Already-started backends continue to ignore changes
in these variables.
upper limit on what we will believe from sysconf(_SC_OPEN_MAX). The
default value is 1000, so that under ordinary conditions it won't
affect the behavior. But on platforms where the kernel promises far
more than it can deliver, this can be used to prevent running out of
file descriptors. See numerous past discussions, eg, pgsql-hackers
around 23-Dec-2000.
pointers to data that will be changed by any later call to setlocale.
Must copy what they return to be sure we get the right answer.
Karel Zak, further tweaks by Tom Lane.
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
Define a new function, GetCurrentTransactionStartTimeUsec() to get the time
to this precision.
Allow now() and timestamp 'now' to use this higher precision result so
we now have fractional seconds in this "constant".
Add timestamp without time zone type.
Move previous timestamp type to timestamp with time zone.
Accept another ISO variant for date/time values: yyyy-mm-ddThh:mm:ss
(note the "T" separating the day from hours information).
Remove 'current' from date/time types; convert to 'now' in input.
Separate time and timetz regression tests.
Separate timestamp and timestamptz regression test.
a hung client or lost connection can't indefinitely block a postmaster
child (not to mention the possibility of deliberate DoS attacks).
Timeout is controlled by new authentication_timeout GUC variable,
which I set to 60 seconds by default ... does that seem reasonable?
Frank Miles 7-Sep-01. This is really just sticking a finger in the dike.
Frank's case works now, but we still couldn't support a recursive function
returning a set. Really need to restructure querytrees and execution
state so that the querytree is *read only*. We've run into this over and
over and over again ... it has to happen sometime soon.
under libdir, for a cleaner separation in the installation layout
and compatibility with binary packaging standards. Point backend's
default search location there. The contrib modules are also
installed in the said location, giving them the benefit of the
default search path as well. No changes in user interface
nevertheless.
>
> 1. Now outputs '\\' instead of '\134' when using encode(bytea, 'escape')
> Note that I ended up leaving \0 as \000 so that there are no ambiguities
> when decoding something like, for example, \0123.
>
> 2. Fixed bug in byteain which allowed input values which were not valid
> octals (e.g. \789), to be parsed as if they were octals.
>
> Joe
>
Here's rev 2 of the bytea string support patch. Changes:
1. Added missing declaration for MatchBytea function
2. Added PQescapeBytea to fe-exec.c
3. Applies cleanly on cvs tip from this afternoon
I'm hoping that someone can review/approve/apply this before beta starts, so
I guess I'd vote (not that it counts for much) to delay beta a few days :-)
Joe Conway
Assign the fixed user id 1 to the user created by initdb.
A stand-alone backend will always set the user id to 1.
(Consequently, the name of that user is no longer important.)
In stand-alone mode, the user id 1 will have implicit superuser
status, to allow repairs even if there are no users defined.
Print a warning message when starting in stand-alone mode when no
users are defined.
Disallow dropping the current user and session user.
Granting/revoking superuser status also grants/revokes usecatupd.
(Previously, it would never grant it back. This could lead to "deadlocks".)
CREATE USER and CREATE GROUP will start allocating user ids at 100
(unless explicitly specified), to prevent accidental creation of a
superuser (plus some room for future extensions).
> > ClientEncoding to SQL_ASCII (like default DatabaseEncoding). Bruce, can
> > you change it? It's one line change. Again thanks.
Forget it! A default client encoding must be set by actual database encoding...
Please apply the small attached patch that solve it better.
Karel Zak
We will no longer try to send elog messages to the client before we have
initialized backend libpq (oops); however, reporting bogus commandline
switches via elog does work now (not irrelevant, because of PGOPTIONS).
Fix problem with inappropriate sending of checkpoint-process messages
to stderr.
for them, and making them just wastes time during backend startup/shutdown.
Also, remove compile-time MAXBACKENDS limit per long-ago proposal.
You can now set MaxBackends as high as your kernel can stand without
any reconfiguration/recompilation.
-------------------------------------------------------------------
Subject: Re: [PATCHES] encoding names
From: Karel Zak <zakkr@zf.jcu.cz>
To: Peter Eisentraut <peter_e@gmx.net>
Cc: pgsql-patches <pgsql-patches@postgresql.org>
Date: Fri, 31 Aug 2001 17:24:38 +0200
On Thu, Aug 30, 2001 at 01:30:40AM +0200, Peter Eisentraut wrote:
> > - convert encoding 'name' to 'id'
>
> I thought we decided not to add functions returning "new" names until we
> know exactly what the new names should be, and pending schema
Ok, the patch not to add functions.
> better
>
> ...(): encoding name too long
Fixed.
I found new bug in command/variable.c in parse_client_encoding(), nobody
probably never see this error:
if (pg_set_client_encoding(encoding))
{
elog(ERROR, "Conversion between %s and %s is not supported",
value, GetDatabaseEncodingName());
}
because pg_set_client_encoding() returns -1 for error and 0 as true.
It's fixed too.
IMHO it can be apply.
Karel
PS:
* following files are renamed:
src/utils/mb/Unicode/KOI8_to_utf8.map -->
src/utils/mb/Unicode/koi8r_to_utf8.map
src/utils/mb/Unicode/WIN_to_utf8.map -->
src/utils/mb/Unicode/win1251_to_utf8.map
src/utils/mb/Unicode/utf8_to_KOI8.map -->
src/utils/mb/Unicode/utf8_to_koi8r.map
src/utils/mb/Unicode/utf8_to_WIN.map -->
src/utils/mb/Unicode/utf8_to_win1251.map
* new file:
src/utils/mb/encname.c
* removed file:
src/utils/mb/common.c
--
Karel Zak <zakkr@zf.jcu.cz>
http://home.zf.jcu.cz/~zakkr/
C, PostgreSQL, PHP, WWW, http://docs.linux.cz, http://mape.jcu.cz
- new millisecond (ms) and microsecond (us) support
- more robus parsing from string - used is separator checking for
non-exact formats like to_date('2001-9-1', 'YYYY-MM-DD')
- SGML docs are included
Karel Zak
If there's anyone out there who's actually using datatype-defined
default values, this will be an incompatible change in behavior ...
but the old behavior was so broken that I doubt anyone was using it.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
has a DISTINCT ON clause, per bug report from Anthony Wood. While at it,
improve the DISTINCT-ON-clause recognizer routine to not be fooled by out-
of-order DISTINCT lists.
in GetSnapshotData, GetNewTransactionId, CommitTransaction, AbortTransaction,
etc. Correct race condition in transaction status testing in
HeapTupleSatisfiesVacuum --- this wasn't important for old VACUUM with
exclusive lock on its table, but it sure is important now. All per
pghackers discussion 7/11/01 and 7/12/01.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
validity checking rules for VACUUM. Make some other rearrangements of the
VACUUM code to allow more code to be shared between full and lazy VACUUM.
Minor code cleanups and added comments for TransactionId manipulations.
stub) into the rest of the system. Adopt a cleaner approach to preventing
deadlock in concurrent heap_updates: allow RelationGetBufferForTuple to
select any page of the rel, and put the onus on it to lock both buffers
in a consistent order. Remove no-longer-needed isExtend hack from
API of ReleaseAndReadBuffer.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
IS TRUE, etc, with some degree of verisimilitude. Split out
selectivity support functions from builtins.h into a new header
file selfuncs.h, so as to reduce the number of header files builtins.h
must depend on. Fix a few missing inclusions exposed thereby.
From Joe Conway, with some kibitzing from Tom Lane.
> > secure_ctx changes too. it will be PGC_BACKEND after '-p'.
>
> Oh, okay, I missed that part. Could we see the total state of the
> patch --- ie, a diff against current CVS, not a bunch of deltas?
> I've gotten confused about what's in and what's out.
Ok, here it is. Cleared the ctx comment too - after -p
it will be PGC_BACKEND in any case.
Marko Kreen
a new postmaster child process. This should eliminate problems with
authentication blocking (e.g., ident, SSL init) and also reduce problems
with the accept queue filling up under heavy load.
The option to send elog output to a different file per backend (postgres -o)
has been disabled for now because the initialization would have to happen
in a different order and it's not clear we want to keep this anyway.
tests to return the correct results per SQL9x when given NULL inputs.
Reimplement these tests as well as IS [NOT] NULL to have their own
expression node types, instead of depending on special functions.
From Joe Conway, with a little help from Tom Lane.
SI messages now include the relevant database OID, so that operations
in one database do not cause useless cache flushes in backends attached
to other databases. Declare SI messages properly using a union, to
eliminate the former assumption that Oid is the same size as int or Index.
Rewrite the nearly-unreadable code in inval.c, and document it better.
Arrange for catcache flushes at end of command/transaction to happen before
relcache flushes do --- this avoids loading a new tuple into the catcache
while setting up new relcache entry, only to have it be flushed again
immediately.
Here is Tomified version of my 2 pending patches.
Dropped the set_.._real change as it is not needed.
Desc would be:
* use GUC for settings from cmdline
Marko Kreen
CatalogCacheFlushRelation (formerly called SystemCacheRelationFlushed)
how to distinguish tuples it should flush from those it needn't; this
means a relcache flush event now only removes the catcache entries
it ought to, rather than zapping the caches completely as it used to.
Testing with the regression tests indicates that this considerably
improves the lifespan of catcache entries. Also, rearrange catcache
data structures so that the limit on number of cached tuples applies
globally across all the catcaches, rather than being per-catcache.
It was a little silly to have the same size limit on both, say,
pg_attribute caches and pg_am caches (there being only four possible
rows in the latter...). Doing LRU removal across all the caches
instead of locally in each one should reduce cache reload traffic
in the more heavily used caches and improve the efficiency of
cache memory use.
detected sooner in backend startup, and is treated as an expected error
(it gives 'Sorry, too many clients already' now). This allows us not
to have to enforce the MaxBackends limit exactly in the postmaster.
Also, remove ProcRemove() and fold its functionality into ProcKill().
There's no good reason for a backend not to be responsible for removing
its PROC entry, and there are lots of good reasons for the postmaster
not to be touching shared-memory data structures.
Tom Lane). For the moment, only the OID/name variants are provided.
I didn't force initdb, but the additions to the 'privileges' regress
test won't pass until you do one.
database, including system catalogs (but not the shared catalogs,
since they don't really belong to his database). This is per recent
mailing list discussion. Clean up some other code that also checks
for database ownerness by introducing a test function is_dbadmin().
inet(text), cidr(text): convert a text value into inet/cidr
set_masklen(inet): set masklen on the inet value
Patch also contains regression checks for these functions.
Alex Pilosov
datatypes, not only strings. parse_hook is useless for bool, I suppose,
but it seems possibly useful for int and double to apply variable-specific
constraints that are more complex than simple range limits. assign_hook
is definitely useful for all datatypes --- we need it right now for bool
to support date cache reset when changing Australian timezone rule setting.
Also, clean up some residual problems with the reset all/show all patch,
including memory leaks and mistaken reset of PostPortNumber. It seems
best that RESET ALL not touch variables that don't have SUSET or
USERSET context.
It "make"s and "make check"s clean against current cvs tip.
There are now both Text and Name variants, and the regression test support
is rolled into the patch. Note that to be complete wrt Name based variants,
there are now 12 user visible versions of has_table_privilege:
has_table_privilege(Text usename, Text relname, Text priv_type)
has_table_privilege(Text usename, Name relname, Text priv_type)
has_table_privilege(Name usename, Text relname, Text priv_type)
has_table_privilege(Name usename, Name relname, Text priv_type)
has_table_privilege(Text relname, Text priv_type) /* assumes current_user */
has_table_privilege(Name relname, Text priv_type) /* assumes current_user */
has_table_privilege(Text usename, Oid reloid, Text priv_type)
has_table_privilege(Name usename, Oid reloid, Text priv_type)
has_table_privilege(Oid reloid, Text priv_type) /* assumes current_user */
has_table_privilege(Oid usesysid, Text relname, Text priv_type)
has_table_privilege(Oid usesysid, Name relname, Text priv_type)
has_table_privilege(Oid usesysid, Oid reloid, Text priv_type)
For the Text based inputs, a new internal function, get_Name is used
(shamelessly copied from get_seq_name in sequence.c) to downcase if not
quoted, or remove quotes if quoted, and truncate. I also added a few test
cases for the downcasing, quote removal, and Name based variants to the
regression test.
Joe Conway
pg_database now has unique indexes on oid and on datname.
pg_shadow now has unique indexes on usename and on usesysid.
pg_am now has unique index on oid.
pg_opclass now has unique index on oid.
pg_amproc now has unique index on amid+amopclaid+amprocnum.
Remove pg_rewrite's unnecessary index on oid, delete unused RULEOID syscache.
Remove index on pg_listener and associated syscache for performance reasons
(caching rows that are certain to change before you need 'em again is
rather pointless).
Change pg_attrdef's nonunique index on adrelid into a unique index on
adrelid+adnum.
Fix various incorrect settings of pg_class.relisshared, make that the
primary reference point for whether a relation is shared or not.
IsSharedSystemRelationName() is now only consulted to initialize relisshared
during initial creation of tables and indexes. In theory we might now
support shared user relations, though it's not clear how one would get
entries for them into pg_class &etc of multiple databases.
Fix recently reported bug that pg_attribute rows created for an index all have
the same OID. (Proof that non-unique OID doesn't matter unless it's
actually used to do lookups ;-))
There's no need to treat pg_trigger, pg_attrdef, pg_relcheck as bootstrap
relations. Convert them into plain system catalogs without hardwired
entries in pg_class and friends.
Unify global.bki and template1.bki into a single init script postgres.bki,
since the alleged distinction between them was misleading and pointless.
Not to mention that it didn't work for setting up indexes on shared
system relations.
Rationalize locking of pg_shadow, pg_group, pg_attrdef (no need to use
AccessExclusiveLock where ExclusiveLock or even RowExclusiveLock will do).
Also, hold locks until transaction commit where necessary.
for GRANT/REVOKE is now just that, not "CHANGE".
On the way, migrate some of the aclitem internal representation away from
the parser and build a real parse tree instead. Also add some 'const'
qualifiers.
checkpoint's redo pointer, not its undo pointer, per discussion in
pghackers a few days ago. No point in hanging onto undo information
until we have the ability to do something with it --- and this solves
a rather large problem with log space for long-running transactions.
Also, change all calls of write() to detect the case where write
returned a count less than requested, but failed to set errno.
Presume that this situation indicates ENOSPC, and give the appropriate
error message, rather than a random message associated with the previous
value of errno.
copy PUBLIC access rights into each newly created ACL entry. Instead
treat each ACL entry as independent flags. Also clean up some ugliness
in acl.h API.
of costsize.c routines to pass Query root, so that costsize can figure
more things out by itself and not be so dependent on its callers to tell
it everything it needs to know. Use selectivity of hash or merge clause
to estimate number of tuples processed internally in these joins
(this is more useful than it would've been before, since eqjoinsel is
somewhat more accurate than before).
(vs. at the end of a normal sort). This ensures that explicit sorts
yield the same ordering as a btree index scan. To be really sure that
that equivalence holds, we use the btree entries in pg_amop to decide
whether we are looking at a '<' or '>' operator. For a sort operator
that has no btree association, we put the nulls at the front if the
operator is named '>' ... pretty grotty, but it does the right thing in
simple ASC and DESC cases, and at least there's no possibility of getting
a different answer depending on the plan type chosen.
Use --enable-nls to turn it on; see installation instructions for details.
See developer's guide how to make use of it in programs and how to add
translations.
psql sources have been almost fully prepared and an incomplete German
translation has been provided. In the backend, only elog() calls are
currently translatable, and the provided German translation file is more
of a placeholder.
given values that compare as unordered, make sure we reply that they
are equal, which is better than giving an arbitrary answer --- at least
it doesn't depend on which one is passed as which arg.
right, but it failed to get the padding case right.
This was obscured by subsequent application of bpchar() in all but one
regression test case, and that one didn't fail in an obvious way ---
trailing blanks are hard to see. Add another test case to make it
more obvious if it breaks again.
report on old-style functions invoked by RI triggers. We had a number of
other places that were being sloppy about which memory context FmgrInfo
subsidiary data will be allocated in. Turns out none of them actually
cause a problem in 7.1, but this is for arcane reasons such as the fact
that old-style triggers aren't supported anyway. To avoid getting burnt
later, I've restructured the trigger support so that we don't keep trigger
FmgrInfo structs in relcache memory. Some other related cleanups too:
it's not really necessary to call fmgr_info at all while setting up
the index support info in relcache entries, because those ScanKeyEntry
structs are never used to invoke the functions. This should speed up
relcache initialization a tiny bit.
because cached fmgr info contained reference to a shorter-lived data
structure. Also guard against possibility that fmgr_info could fail,
leaving an incomplete entry present in the hash table.
from an empty text string. This makes them consistent with the de facto
behavior of type char's I/O conversion functions, and avoids generating
text values with embedded nulls, which confuse many text operators.
to do that, but inconsistently.) Make bit type reject too short input,
too, per SQL. Since it no longer zero pads, 'zpbit*' has been renamed to
'bit*' in the source, hence initdb.
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
collected by ANALYZE. Also, add some modest amount of intelligence to
guesses that are used for varlena columns in the absence of any ANALYZE
statistics. The 'width' reported by EXPLAIN is finally something less
than totally bogus for varlena columns ... and, in consequence, hashjoin
estimating should be a little better ...
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
routine DetermineLocalTimeZone(). In that routine, be more wary of
broken mktime() implementations than the original code was: don't allow
mktime to change the already-set y/m/d/h/m/s information, and don't
use tm_gmtoff if mktime failed. Possibly this will resolve some of
the complaints we've been hearing from users of Middle Eastern timezones
on RedHat.
give consistent results for all datatypes. Types float4, float8, and
numeric were broken for NaN values; abstime, timestamp, and interval
were broken for INVALID values; timetz was just plain broken (some
possible pairs of values were neither < nor = nor >). Also clean up
text, bpchar, varchar, and bit/varbit to eliminate duplicate code and
thereby reduce the probability of similar inconsistencies arising in
the future.
lists should be reverse-compiled into targetlist index numbers, because
that's the only interpretation the parser allows for a constant in these
clauses. (Ergo, the only way they could have gotten into the list in
the first place is to have come from the targetlist; so this should always
work.) Per problem report from Peter E.
Although it was now using the right equation, it was making bogus choices
of the precision to compute intermediate results to. I'm not sure this
is really right even yet, but it's better than before ...
physical file has disappeared. There is no really good reason why
relcache should be opening the underlying file at all, AFAICS.
In any case we needn't raise a hard error here.
accepts nnnLL syntax for long long constants. If so, decorate the CRC64
constants with LL to avoid warnings and/or erroneous results from certain
non-standards-compliant compilers.
on Alpha (because parser mistakenly assumes that a nonoverflow result
from strtol means the value will fit into int4). A scan for other uses
of strtol and strtoul found a couple other places with the same mistake;
fix them too. The changes are all conditional on HAVE_LONG_INT_64 to
avoid complaints from compilers that think x != x is a silly test
(cf. pg_atoi).
O_SYNC, or O_DSYNC (as available on a given platform). Add GUC parameter
to control sync method.
Also, add defense to XLogWrite to prevent it from going nuts if passed
a target write position that's past the end of the buffers so far filled
by XLogInsert.
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
of a counted input string. Marinos Yannikos' recent crash report turns
out to be due to applying pg_ascii2wchar_with_len to a TEXT object that
is smack up against the end of memory. This is the second just-barely-
reproducible bug report I have seen that traces to some bit of code
fetching one more byte than it is allowed to. Let's be more careful
out there, boys and girls.
While at it, I changed the code to not risk a similar crash when there
is a truncated multibyte character at the end of an input string. The
output in this case might not be the most reasonable output possible;
if anyone wants to improve it further, step right up...
