We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
When configured with --enable-tap-tests, "make install" will now install
the Perl support files for TAP testing where PGXS will find them.
This allows extensions to rely on $(prove_check) even when being built
out-of-tree. Back-patch to 9.4 where we first started to support TAP
testing, to reduce the number of cases extension makefiles need to
consider.
Craig Ringer
Discussion: <CAMsr+YFXv+2qne6xJW7z_25mYBtktRX5rpkrgrb+DRgQ_FxgHQ@mail.gmail.com>
ExecInitCteScan supposed that it didn't have to do anything to the extra
tuplestore read pointer it gets from tuplestore_alloc_read_pointer.
However, it needs this read pointer to be positioned at the start of the
tuplestore, while tuplestore_alloc_read_pointer is actually defined as
cloning the current position of read pointer 0. In normal situations
that accidentally works because we initialize the whole plan tree at once,
before anything gets read. But it fails in an EvalPlanQual recheck, as
illustrated in bug #14328 from Dima Pavlov. To fix, just forcibly rewind
the pointer after tuplestore_alloc_read_pointer. The cost of doing so is
negligible unless the tuplestore is already in TSS_READFILE state, which
wouldn't happen in normal cases. We could consider altering tuplestore's
API to make that case cheaper, but that would make for a more invasive
back-patch and it doesn't seem worth it.
This has been broken probably for as long as we've had CTEs, so back-patch
to all supported branches.
Discussion: <32468.1474548308@sss.pgh.pa.us>
Add tests for consistent support of connection strings in frontend
programs as well as proper handling of unusual characters in database
and user names. These tests were developed for the issues of
CVE-2016-5424.
To allow testing of names with spaces, change the pg_regress
command-line options --create-role and --dbname to split their arguments
by comma only, not space or comma as before. Only commas were actually
used in existing uses.
Noah Misch, Michael Paquier, Peter Eisentraut
Consistently print the test name, not the full command, which can be
quite lenghty and include temporary directory names and other
distracting details.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to all supported branches, per popular demand. In back-branches,
we still support OpenSSL 0.9.7 and above. OpenSSL 0.9.6 should still work
too, but I didn't test it. In master, we only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
The money type input function did not have any overflow checks at all.
There were some regression tests that purported to check for overflow,
but they actually checked for the overflow behavior of the int8 type
before casting to money. Remove those unnecessary checks and add some
that actually check the money input function.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Teach the parser to reject misplaced set-returning functions during parse
analysis using p_expr_kind, in much the same way as we do for aggregates
and window functions (cf commit eaccfded9). While this isn't complete
(it misses nesting-based restrictions), it's much better than the previous
error reporting for such cases, and it allows elimination of assorted
ad-hoc expression_returns_set() error checks. We could add nesting checks
later if it seems important to catch all cases at parse time.
There is one case the parser will now throw error for although previous
versions allowed it, which is SRFs in the tlist of an UPDATE. That never
behaved sensibly (since it's ill-defined which generated row should be
used to perform the update) and it's hard to see why it should not be
treated as an error. It's a release-note-worthy change though.
Also, add a new Query field hasTargetSRFs reporting whether there are
any SRFs in the targetlist (including GROUP BY/ORDER BY expressions).
The parser can now set that basically for free during parse analysis,
and we can use it in a number of places to avoid expression_returns_set
searches. (There will be more such checks soon.) In some places, this
allows decontorting the logic since it's no longer expensive to check for
SRFs in the tlist --- so I made the checks parallel to the handling of
hasAggs/hasWindowFuncs wherever it seemed appropriate.
catversion bump because adding a Query field changes stored rules.
Andres Freund and Tom Lane
Discussion: <24639.1473782855@sss.pgh.pa.us>
The output of the function changes whenever previous (or, as in this
case, concurrent) tests leave a table in place. That causes unneeded
churn.
This should fix failures due to the tests added bfe16d1a5, like on
lapwing, caused by the tsrf test running concurrently with misc. Those
could also have been addressed by using temp tables, but that test has
annoyed me before.
Discussion: <27626.1473729905@sss.pgh.pa.us>
We're considering changing the implementation of targetlist SRFs
considerably, and a lot of the current behaviour isn't tested in our
regression tests. Thus it seems useful to increase coverage to avoid
accidental behaviour changes.
It's quite possible that some of the plans here will require adjustments
to avoid falling afoul of ordering differences (e.g. hashed group
bys). The buildfarm will tell us.
Reviewed-By: Tom Lane
Discussion: <20160827214829.zo2dfb5jaikii5nw@alap3.anarazel.de>
When heap_lock_tuple decides to follow the update chain, it tried to
also lock any version of the tuple that was created by an update that
was subsequently rolled back. This is pointless, since for all intents
and purposes that tuple exists no more; and moreover it causes
misbehavior, as reported independently by Marko Tiikkaja and Marti
Raudsepp: some SELECT FOR UPDATE/SHARE queries may fail to return
the tuples, and assertion-enabled builds crash.
Fix by having heap_lock_updated_tuple test the xmin and return success
immediately if the tuple was created by an aborted transaction.
The condition where tuples become invisible occurs when an updated tuple
chain is followed by heap_lock_updated_tuple, which reports the problem
as HeapTupleSelfUpdated to its caller heap_lock_tuple, which in turn
propagates that code outwards possibly leading the calling code
(ExecLockRows) to believe that the tuple exists no longer.
Backpatch to 9.3. Only on 9.5 and newer this leads to a visible
failure, because of commit 27846f02c176; before that, heap_lock_tuple
skips the whole dance when the tuple is already locked by the same
transaction, because of the ancient HeapTupleSatisfiesUpdate behavior.
Still, the buggy condition may also exist in more convoluted scenarios
involving concurrent transactions, so it seems safer to fix the bug in
the old branches too.
Discussion:
https://www.postgresql.org/message-id/CABRT9RC81YUf1=jsmWopcKJEro=VoeG2ou6sPwyOUTx_qteRsg@mail.gmail.comhttps://www.postgresql.org/message-id/48d3eade-98d3-8b9a-477e-1a8dc32a724d@joh.to
commit_ts and test_pg_dump were declaring targets before including the
PGXS stanza, which meant that the "all" target customarily defined as
the first (and therefore default target) was not the default anymore.
Fix that by moving those target definitions to after PGXS.
commit_ts was initially good, but I broke it in commit 9def031bd2;
test_pg_dump was born broken, probably copying from commit_ts' mistake.
In passing, fix a comment mistake in test_pg_dump/Makefile.
Backpatch to 9.6.
Noted by Tom Lane.
Previously, if a schema was created by an extension, a normal pg_dump run
(not --binary-upgrade) would summarily skip every object in that schema.
In a case where an extension creates a schema and then users create other
objects within that schema, this does the wrong thing: we want pg_dump
to skip the schema but still create the non-extension-owned objects.
There's no easy way to fix this pre-9.6, because in earlier versions the
"dump" status for a schema is just a bool and there's no way to distinguish
"dump me" from "dump my members". However, as of 9.6 we do have enough
state to represent that, so this is a simple correction of the logic in
selectDumpableNamespace.
In passing, make some cosmetic fixes in nearby code.
Martín Marqués, reviewed by Michael Paquier
Discussion: <99581032-71de-6466-c325-069861f1947d@2ndquadrant.com>
Not much to be said about this patch: it does what it says on the tin.
In passing, rename AlterEnumStmt.skipIfExists to skipIfNewValExists
to clarify what it actually does. In the discussion of this patch
we considered supporting other similar options, such as IF EXISTS
on the type as a whole or IF NOT EXISTS on the target name. This
patch doesn't actually add any such feature, but it might happen later.
Dagfinn Ilmari Mannsåker, reviewed by Emre Hasegeli
Discussion: <CAO=2mx6uvgPaPDf-rHqG8=1MZnGyVDMQeh8zS4euRyyg4D35OQ@mail.gmail.com>
Previously, we failed to recognize Unicode characters above U+7FF as
being members of locale-dependent character classes such as [[:alpha:]].
(Actually, the same problem occurs for large pg_wchar values in any
multibyte encoding, but UTF8 is the only case people have actually
complained about.) It's impractical to get Spencer's original code to
handle character classes or ranges containing many thousands of characters,
because it insists on considering each member character individually at
regex compile time, whether or not the character will ever be of interest
at run time. To fix, choose a cutoff point MAX_SIMPLE_CHR below which
we process characters individually as before, and deal with entire ranges
or classes as single entities above that. We can actually make things
cheaper than before for chars below the cutoff, because the color map can
now be a simple linear array for those chars, rather than the multilevel
tree structure Spencer designed. It's more expensive than before for
chars above the cutoff, because we must do a binary search in a list of
high chars and char ranges used in the regex pattern, plus call iswalpha()
and friends for each locale-dependent character class used in the pattern.
However, multibyte encodings are normally designed to give smaller codes
to popular characters, so that we can expect that the slow path will be
taken relatively infrequently. In any case, the speed penalty appears
minor except when we have to apply iswalpha() etc. to high character codes
at runtime --- and the previous coding gave wrong answers for those cases,
so whether it was faster is moot.
Tom Lane, reviewed by Heikki Linnakangas
Discussion: <15563.1471913698@sss.pgh.pa.us>
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Andrew Dunstan and Tom Lane
Discussion: <4075.1459088427@sss.pgh.pa.us>
When pg_logical_slot_get_changes(...) sets confirmed_flush_lsn to the point at
which replay stopped, it doesn't dirty the replication slot. So if the replay
didn't cause restart_lsn or catalog_xmin to change as well, this change will
not get written out to disk. Even on a clean shutdown.
If Pg crashes or restarts, a subsequent pg_logical_slot_get_changes(...) call
will see the same changes already replayed since it uses the slot's
confirmed_flush_lsn as the start point for fetching changes. The caller can't
specify a start LSN when using the SQL interface.
Mark the slot as dirty after reading changes using the SQL interface so that
users won't see repeated changes after a clean shutdown. Repeated changes still
occur when using the walsender interface or after an unclean shutdown.
Craig Ringer
After further reflection about the mess cleaned up in commit 39b691f25,
I decided the main bit of test coverage that was still missing was to
check that the non-default abbreviation-set files we supply are usable.
Add that.
Back-patch to supported branches, just because it seems like a good
idea to keep this all in sync.
split_to_stringlist() doesn't modify its first argument nor expect it
to remain valid after exit, so there's no need to duplicate the optarg
string at the call sites. Per Coverity. (This has been wrong all along,
but commit 052cc223d changed the useless calls from "strdup" to
"pg_strdup", which apparently made Coverity think it's a new bug.
It's not, but it's also not worth back-patching.)
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Report: <20160902031551.15674.67337@wrigleys.postgresql.org>
Discussion: <6189.1472820913@sss.pgh.pa.us>
This introduces a numeric sum accumulator, which performs better than
repeatedly calling add_var(). The performance comes from using wider digits
and delaying carry propagation, tallying positive and negative values
separately, and avoiding a round of palloc/pfree on every value. This
speeds up SUM(), as well as other standard aggregates like AVG() and
STDDEV() that also calculate a sum internally.
Reviewed-by: Andrey Borodin
Discussion: <c0545351-a467-5b76-6d46-4840d1ea8aa4@iki.fi>
Where possible, use palloc or pg_malloc instead; otherwise, insert
explicit NULL checks.
Generally speaking, these are places where an actual OOM is quite
unlikely, either because they're in client programs that don't
allocate all that much, or they're very early in process startup
so that we'd likely have had a fork() failure instead. Hence,
no back-patch, even though this is nominally a bug fix.
Michael Paquier, with some adjustments by me
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>
Commit f0c7b789a added a test case in case.sql that creates and then drops
both an '=' operator and the type it's for. Given the right timing, that
can cause a "cache lookup failed for type" failure in concurrent sessions,
which see the '=' operator as a potential match for '=' in a query, but
then the type is gone by the time they inquire into its properties.
It might be nice to make that behavior more robust someday, but as a
back-patchable solution, adjust the new test case so that the operator
is never visible to other sessions. Like the previous commit, back-patch
to all supported branches.
Discussion: <5983.1471371667@sss.pgh.pa.us>
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
This seems to offer significantly better search performance than the
existing GiST opclass for inet/cidr, at least on data with a wide mix
of network mask lengths. (That may suggest that the data splitting
heuristics in the GiST opclass could be improved.)
Emre Hasegeli, with mostly-cosmetic adjustments by me
Discussion: <CAE2gYzxtth9qatW_OAqdOjykS0bxq7AYHLuyAQLPgT7H9ZU0Cw@mail.gmail.com>
Add a variant of txid_current() that returns NULL if no transaction ID
is assigned. This version can be used even on a standby server,
although it will always return NULL since no transaction IDs can be
assigned during recovery.
Craig Ringer, per suggestion from Jim Nasby. Reviewed by Petr Jelinek
and by me.
Remove the plpgsql wrapping that hides the context. So now the test
will fail if the work doesn't actually happen in a parallel worker. Run
the test in its own test group to ensure it won't run out of resources
for that.
In particular, left join to pg_authid so that rows in pg_stat_activity
don't disappear if the session's owning user has been dropped.
Also convert a few joins to pg_database to left joins, in the same spirit,
though that case might be harder to hit. We were doing this in other
views already, so it was a bit inconsistent that these views didn't.
Oskari Saarenmaa, with some further tweaking by me
Discussion: <56E87CD8.60007@ohmu.fi>
On some buildfarm animals the isolationtest added in 07ef0351 failed, as
the order in which processes are run after unlocking is not
guaranteed. Add an alternative output for that.
Discussion: <7969.1471484738@sss.pgh.pa.us>
Backpatch: 9.6, like the test in the aforementioned commit
INSERT .. ON CONFLICT runs a pre-check of the possible conflicting
constraints before performing the actual speculative insertion. In case
the inserted tuple included TOASTed columns the ON CONFLICT condition
would be handled correctly in case the conflict was caught by the
pre-check, but if two transactions entered the speculative insertion
phase at the same time, one would have to re-try, and the code for
aborting a speculative insertion did not handle deleting the
speculatively inserted TOAST datums correctly.
TOAST deletion would fail with "ERROR: attempted to delete invisible
tuple" as we attempted to remove the TOAST tuples using
simple_heap_delete which reasoned that the given tuples should not be
visible to the command that wrote them.
This commit updates the heap_abort_speculative() function which aborts
the conflicting tuple to use itself, via toast_delete, for deleting
associated TOAST datums. Like before, the inserted toast rows are not
marked as being speculative.
This commit also adds a isolationtester spec test, exercising the
relevant code path. Unfortunately 9.5 cannot handle two waiting
sessions, and thus cannot execute this test.
Reported-By: Viren Negi, Oskari Saarenmaa
Author: Oskari Saarenmaa, edited a bit by me
Bug: #14150
Discussion: <20160519123338.12513.20271@wrigleys.postgresql.org>
Backpatch: 9.5, where ON CONFLICT was introduced
regexp_match() is like regexp_matches(), but it disallows the 'g' flag
and in consequence does not need to return a set. Instead, it returns
a simple text array value, or NULL if there's no match. Previously people
usually got that behavior with a sub-select, but this way is considerably
more efficient.
Documentation adjusted so that regexp_match() is presented first and then
regexp_matches() is introduced as a more complicated version. This is
a bit historically revisionist but seems pedagogically better.
Still TODO: extend contrib/citext to support this function.
Emre Hasegeli, reviewed by David Johnston
Discussion: <CAE2gYzy42sna2ME_e3y1KLQ-4UBrB-eVF0SWn8QG39sQSeVhEw@mail.gmail.com>
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
NUMERIC_MAX_PRECISION is a purely arbitrary constraint on the precision
and scale you can write in a numeric typmod. It might once have had
something to do with the allowed range of a typmod-less numeric value,
but at least since 9.1 we've allowed, and documented that we allowed,
any value that would physically fit in the numeric storage format;
which is something over 100000 decimal digits, not 1000.
Hence, get rid of numeric_in()'s use of NUMERIC_MAX_PRECISION as a limit
on the allowed range of the exponent in scientific-format input. That was
especially silly in view of the fact that you can enter larger numbers as
long as you don't use 'e' to do it. Just constrain the value enough to
avoid localized overflow, and let make_result be the final arbiter of what
is too large. Likewise adjust ecpg's equivalent of this code.
Also get rid of numeric_recv()'s use of NUMERIC_MAX_PRECISION to limit the
number of base-NBASE digits it would accept. That created a dump/restore
hazard for binary COPY without doing anything useful; the wire-format
limit on number of digits (65535) is about as tight as we would want.
In HEAD, also get rid of pg_size_bytes()'s unnecessary intimacy with what
the numeric range limit is. That code doesn't exist in the back branches.
Per gripe from Aravind Kumar. Back-patch to all supported branches,
since they all contain the documentation claim about allowed range of
NUMERIC (cf commit cabf5d84b).
Discussion: <2895.1471195721@sss.pgh.pa.us>
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
Commit 874fe3aea changed the command tag returned for CREATE MATVIEW/CREATE
TABLE AS ... WITH NO DATA, but missed that there was code in spi.c that
expected the command tag to always be "SELECT". Fortunately, the
consequence was only an Assert failure, so this oversight should have no
impact in production builds.
Since this code path was evidently un-exercised, add a regression test.
Per report from Shivam Saxena. Back-patch to 9.3, like the previous commit.
Michael Paquier
Report: <97218716-480B-4527-B5CD-D08D798A0C7B@dresources.com>
ExecEvalCase() tried to save a cycle or two by passing
&econtext->caseValue_isNull as the isNull argument to its sub-evaluation of
the CASE value expression. If that subexpression itself contained a CASE,
then *isNull was an alias for econtext->caseValue_isNull within the
recursive call of ExecEvalCase(), leading to confusion about whether the
inner call's caseValue was null or not. In the worst case this could lead
to a core dump due to dereferencing a null pointer. Fix by not assigning
to the global variable until control comes back from the subexpression.
Also, avoid using the passed-in isNull pointer transiently for evaluation
of WHEN expressions. (Either one of these changes would have been
sufficient to fix the known misbehavior, but it's clear now that each of
these choices was in itself dangerous coding practice and best avoided.
There do not seem to be any similar hazards elsewhere in execQual.c.)
Also, it was possible for inlining of a SQL function that implements the
equality operator used for a CASE comparison to result in one CASE
expression's CaseTestExpr node being inserted inside another CASE
expression. This would certainly result in wrong answers since the
improperly nested CaseTestExpr would be caused to return the inner CASE's
comparison value not the outer's. If the CASE values were of different
data types, a crash might result; moreover such situations could be abused
to allow disclosure of portions of server memory. To fix, teach
inline_function to check for "bare" CaseTestExpr nodes in the arguments of
a function to be inlined, and avoid inlining if there are any.
Heikki Linnakangas, Michael Paquier, Tom Lane
Report: https://github.com/greenplum-db/gpdb/pull/327
Report: <4DDCEEB8.50602@enterprisedb.com>
Security: CVE-2016-5423
In arguments, these meta-commands wrongly treated each pair as closing
the double quoted string. Make the behavior match the documentation.
This is a compatibility break, but I more expect to find software with
untested reliance on the documented behavior than software reliant on
today's behavior. Back-patch to 9.1 (all supported versions).
Reviewed by Tom Lane and Peter Eisentraut.
Security: CVE-2016-5424
This is required for the result to be a legal tsvector value.
Noted while fooling with Andreas Seltenreich's ts_delete() crash.
Discussion: <87invhoj6e.fsf@credativ.de>
Such cases either failed an Assert, or produced a corrupt tsvector in
non-Assert builds, as reported by Andreas Seltenreich. The reason is
that tsvector_delete_by_indices() just assumed that its input array had
no duplicates. Fix by explicitly de-duping.
In passing, improve some comments, and fix a number of tests for null
values to use ERRCODE_NULL_VALUE_NOT_ALLOWED not
ERRCODE_INVALID_PARAMETER_VALUE.
Discussion: <87invhoj6e.fsf@credativ.de>
Previously, if an INSERT with multiple rows of VALUES had indirection
(array subscripting or field selection) in its target-columns list, the
parser handled that by applying transformAssignedExpr() to each element
of each VALUES row independently. This led to having ArrayRef assignment
nodes or FieldStore nodes in each row of the VALUES RTE. That works for
simple cases, but in bug #14265 Nuri Boardman points out that it fails
if there are multiple assignments to elements/fields of the same target
column. For such cases to work, rewriteTargetListIU() has to nest the
ArrayRefs or FieldStores together to produce a single expression to be
assigned to the column. But it failed to find them in the top-level
targetlist and issued an error about "multiple assignments to same column".
We could possibly fix this by teaching the rewriter to apply
rewriteTargetListIU to each VALUES row separately, but that would be messy
(it would change the output rowtype of the VALUES RTE, for example) and
inefficient. Instead, let's fix the parser so that the VALUES RTE outputs
are just the user-specified values, cast to the right type if necessary,
and then the ArrayRefs or FieldStores are applied in the top-level
targetlist to Vars representing the RTE's outputs. This is the same
parsetree representation already used for similar cases with INSERT/SELECT
syntax, so it allows simplifications in ruleutils.c, which no longer needs
to treat INSERT-from-multiple-VALUES as its own special case.
This implementation works by applying transformAssignedExpr to the VALUES
entries as before, and then stripping off any ArrayRefs or FieldStores it
adds. With lots of VALUES rows it would be noticeably more efficient to
not add those nodes in the first place. But that's just an optimization
not a bug fix, and there doesn't seem to be any good way to do it without
significant refactoring. (A non-invasive answer would be to apply
transformAssignedExpr + stripping to just the first VALUES row, and then
just forcibly cast remaining rows to the same data types exposed in the
first row. But this way would lead to different, not-INSERT-specific
errors being reported in casting failure cases, so it doesn't seem very
nice.) So leave that for later; this patch at least isn't making the
per-row parsing work worse, and it does make the finished parsetree
smaller, saving rewriter and planner work.
Catversion bump because stored rules containing such INSERTs would need
to change. Because of that, no back-patch, even though this is a very
long-standing bug.
Report: <20160727005725.7438.26021@wrigleys.postgresql.org>
Discussion: <9578.1469645245@sss.pgh.pa.us>
In test 001_stream_rep we're using pg_stat_replication.write_location to
determine catch-up status, but we care about xlog having been applied
not just received, so change that to apply_location.
In test 003_recovery_targets, we query the database for a recovery
target specification and later for the xlog position supposedly
corresponding to that recovery specification. If for whatever reason
more WAL is written between the two queries, the recovery specification
is earlier than the xlog position used by the query in the test harness,
so we wait forever, leading to test failures. Deal with this by using a
single query to extract both items. In 2a0f89cd71 we tried to deal
with it by giving them more tests to run, but in hindsight that was
obviously doomed to failure (no revert of that, though).
Per hamster buildfarm failures.
Author: Michaël Paquier
This coding pattern creates a race condition, because if an interesting
interrupt happens after we've checked InterruptPending but before we reset
our latch, the latch-setting done by the signal handler would get lost,
and then we might block at WaitLatch in the next iteration without ever
noticing the interrupt condition. You can put the CHECK_FOR_INTERRUPTS
before WaitLatch or after ResetLatch, but not between them.
Aside from fixing the bugs, add some explanatory comments to latch.h
to perhaps forestall the next person from making the same mistake.
In HEAD, also replace gather_readnext's direct call of
HandleParallelMessages with CHECK_FOR_INTERRUPTS. It does not seem clean
or useful for this one caller to bypass ProcessInterrupts and go straight
to HandleParallelMessages; not least because that fails to consider the
InterruptPending flag, resulting in useless work both here
(if InterruptPending isn't set) and in the next CHECK_FOR_INTERRUPTS call
(if it is).
This thinko seems to have been introduced in the initial coding of
storage/ipc/shm_mq.c (commit ec9037df2), and then blindly copied into all
the subsequent parallel-query support logic. Back-patch relevant hunks
to 9.4 to extirpate the error everywhere.
Discussion: <1661.1469996911@sss.pgh.pa.us>
With the refactoring of pg_dump to handle components, getOwnedSeqs needs
to be a bit more intelligent regarding which components to dump when.
Specifically, we can't simply use the owning table's components as the
set of components to dump as the table might only be including certain
components while all components of the sequence should be dumped, for
example, when the table is a member of an extension while the sequence
is not.
Handle this by combining the set of components to be dumped for the
sequence explicitly and those to be dumped for the table when setting
the components to be dumped for the sequence.
Also add a number of regression tests around this to, hopefully, catch
any future changes which break the expected behavior.
Discovered by: Philippe BEAUDOIN
Reviewed by: Michael Paquier
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
ExecMakeTableFunctionResult(), which is used in SELECT FROM function(...)
cases, formerly treated a simple NULL output from a function that both
returnsSet and returnsTuple as a violation of the SRF protocol. What seems
better is to treat a NULL output as equivalent to ROW(NULL,NULL,...).
Without this, cases such as SELECT FROM unnest(...) on an array of
composite are vulnerable to unexpected and not-very-helpful failures.
Old code comments here suggested an alternative of just ignoring
simple-NULL outputs, but that doesn't seem very principled.
This change had been hung up for a long time due to uncertainty about
how much we wanted to buy into the equivalence of simple NULL and
ROW(NULL,NULL,...). I think that's been mostly resolved by the discussion
around bug #14235, so let's go ahead and do it.
Per bug #7808 from Joe Van Dyk. Although this is a pretty old report,
fixing it smells a bit more like a new feature than a bug fix, and the
lack of other similar complaints suggests that we shouldn't take much risk
of destabilization by back-patching. (Maybe that could be revisited once
this patch has withstood some field usage.)
Andrew Gierth and Tom Lane
Report: <E1TurJE-0006Es-TK@wrigleys.postgresql.org>
Previously, some functions returned various fixed strings and others
failed with a cache lookup error. Per discussion, standardize on
returning NULL. Although user-exposed "cache lookup failed" error
messages might normally qualify for bug-fix treatment, no back-patch;
the risk of breaking user code which is accustomed to the current
behavior seems too high.
Michael Paquier
The SQL standard appears to specify that IS [NOT] NULL's tests of field
nullness are non-recursive, ie, we shouldn't consider that a composite
field with value ROW(NULL,NULL) is null for this purpose.
ExecEvalNullTest got this right, but eval_const_expressions did not,
leading to weird inconsistencies depending on whether the expression
was such that the planner could apply constant folding.
Also, adjust the docs to mention that IS [NOT] DISTINCT FROM NULL can be
used as a substitute test if a simple null check is wanted for a rowtype
argument. That motivated reordering things so that IS [NOT] DISTINCT FROM
is described before IS [NOT] NULL. In HEAD, I went a bit further and added
a table showing all the comparison-related predicates.
Per bug #14235. Back-patch to all supported branches, since it's certainly
undesirable that constant-folding should change the semantics.
Report and patch by Andrew Gierth; assorted wordsmithing and revised
regression test cases by me.
Report: <20160708024746.1410.57282@wrigleys.postgresql.org>
In an example of TAP test scripts, there is the test checking whether
the result of the query is expected or not. But, in previous example,
the exit code of psql instead of the query result was checked unexpectedly.
Author: Ildar Musin
These tests are currently only running in buildfarm member hamster,
which is purposefully very slow. This suite has failed a couple of
times recently because of timeouts, so increase the allowed number of
iterations to avoid spurious failures.
Author: Michaël Paquier
Welsh (cy_GB) apparently sorts 'dd' after 'f', creating problems
analogous to the odd sorting of 'aa' in Danish. Adjust regression
test case to not use data that provokes that.
Jeff Janes
Patch: <CAMkU=1zx-pqcfSApL2pYDQurPOCfcYU0wJorsmY1OrYPiXRbLw@mail.gmail.com>
Some tests added in 9.5 depended on 'aa' sorting before 'bb', which
doesn't hold true in Danish. Use slightly different test data to
avoid the problem.
Jeff Janes
Report: <CAMkU=1w-cEDbA+XHdNb=YS_4wvZbs66Ni9KeSJKAJGNJyOsgQw@mail.gmail.com>
To ensure that "make installcheck" can be used safely against an existing
installation, we need to be careful about what global object names
(database, role, and tablespace names) we use; otherwise we might
accidentally clobber important objects. There's been a weak consensus that
test databases should have names including "regression", and that test role
names should start with "regress_", but we didn't have any particular rule
about tablespace names; and neither of the other rules was followed with
any consistency either.
This commit moves us a long way towards having a hard-and-fast rule that
regression test databases must have names including "regression", and that
test role and tablespace names must start with "regress_". It's not
completely there because I did not touch some test cases in rolenames.sql
that test creation of special role names like "session_user". That will
require some rethinking of exactly what we want to test, whereas the intent
of this patch is just to hit all the cases in which the needed renamings
are cosmetic.
There is no enforcement mechanism in this patch either, but if we don't
add one we can expect that the tests will soon be violating the convention
again. Again, that's not such a cosmetic change and it will require
discussion. (But I did use a quick-hack enforcement patch to find these
cases.)
Discussion: <16638.1468620817@sss.pgh.pa.us>
On second thought, we should probably do at least a minimal check that
the constructed index is valid, since the big problem with the most
recent breakage was not whether the sorting was correct but that the
index had incorrect hash codes placed in it.
We've broken this code path at least twice in the past, so it's prudent
to have a test case that covers it. To allow exercising the code path
without creating a very large (and slow to run) test case, redefine the
sort threshold to be bounded by maintenance_work_mem as well as the number
of available buffers. While at it, fix an ancient oversight that when
building a temp index, the number of available buffers is not NBuffers but
NLocBuffer. Also, if assertions are enabled, apply a direct test that the
sort actually does return the tuples in the expected order.
Peter Geoghegan
Patch: <CAM3SWZTBAo4hjbBd780+MrOKiKp_TMo1N3A0Rw9_im8gbD7fQA@mail.gmail.com>
When key-share locking a tuple that has been not-key-updated, and the
update is a committed transaction, in some cases we raised
serializability errors:
ERROR: could not serialize access due to concurrent update
Because the key-share doesn't conflict with the update, the error is
unnecessary and inconsistent with the case that the update hasn't
committed yet. This causes problems for some usage patterns, even if it
can be claimed that it's sufficient to retry the aborted transaction:
given a steady stream of updating transactions and a long locking
transaction, the long transaction can be starved indefinitely despite
multiple retries.
To fix, we recognize that HeapTupleSatisfiesUpdate can return
HeapTupleUpdated when an updating transaction has committed, and that we
need to deal with that case exactly as if it were a non-committed
update: verify whether the two operations conflict, and if not, carry on
normally. If they do conflict, however, there is a difference: in the
HeapTupleBeingUpdated case we can just sleep until the concurrent
transaction is gone, while in the HeapTupleUpdated case this is not
possible and we must raise an error instead.
Per trouble report from Olivier Dony.
In addition to a couple of test cases that verify the changed behavior,
I added a test case to verify the behavior that remains unchanged,
namely that errors are raised when a update that modifies the key is
used. That must still generate serializability errors. One
pre-existing test case changes behavior; per discussion, the new
behavior is actually the desired one.
Discussion: https://www.postgresql.org/message-id/560AA479.4080807@odoo.comhttps://www.postgresql.org/message-id/20151014164844.3019.25750@wrigleys.postgresql.org
Backpatch to 9.3, where the problem appeared.
Digging around bug #14245 I found that commit
6734a1cacd missed that NOT operation is
right associative in opposite to all other. This miss is resposible for
tsquery parser fail on sequence of NOT operations
During normalization of tsquery tree it tries to simplify nested NOT
operations but there it's obvioulsy missed that subsequent node could be
a leaf node (value node)
Bug #14245: Segfault on weird to_tsquery
Reported by David Kellum.
Dept of second thoughts: given the RESET SESSION AUTHORIZATION that
was just added by commit cec550139, we don't need the reconnection
that used to be here. Might as well buy back a few microseconds.
Test the external-sort code path in CLUSTER for two different scenarios:
multiple-pass external sorting, and the best case for replacement
selection, where only one run is produced, so that no merge is required.
This test would have caught the bug fixed in commit 1b0fc8507, at
least when run with valgrind enabled.
In passing, add a short-circuit test in plan_cluster_use_sort() to make
dead certain that it selects sorting when enable_indexscan is off. As
things stand, that would happen anyway, but it seems like good future
proofing for this test.
Peter Geoghegan
Discussion: <CAM3SWZSgxehDkDMq1FdiW2A0Dxc79wH0hz1x-TnGy=1BXEL+nw@mail.gmail.com>
Change assorted places in our Perl code that did things like
system("prog $path/file");
to do it more like
system('prog', "$path/file");
which is safe against spaces and other special characters in the path
variable. The latter was already the prevailing style, but a few bits
of code hadn't gotten this memo. Back-patch to 9.4 as relevant.
Michael Paquier, Kyotaro Horiguchi
Discussion: <20160704.160213.111134711.horiguchi.kyotaro@lab.ntt.co.jp>
Per discussion on pgsql-hackers, conninfo is better as the column name
because it's more commonly used in PostgreSQL.
Catalog version bumped due to the change of pg_proc.
Author: Michael Paquier
ExecInsertIndexTuples treated an exclusion constraint as subject to
noDupErr processing even when it was not listed in arbiterIndexes, and
would therefore not error out for a conflict in such a constraint, instead
returning it as an arbiter-index failure. That led to an infinite loop in
ExecInsert, since ExecCheckIndexConstraints ignored the index as-intended
and therefore didn't throw the expected error. To fix, make the exclusion
constraint code path use the same condition as the index_insert call does
to decide whether no-error-for-duplicates behavior is appropriate. While
at it, refactor a little bit to avoid unnecessary list_member_oid calls.
(That surely wouldn't save anything worth noticing, but I find the code
a bit clearer this way.)
Per bug report from Heikki Rauhala. Back-patch to 9.5 where ON CONFLICT
was introduced.
Report: <4C976D6B-76B4-434C-8052-D009F7B7AEDA@reaktor.fi>
In commit 915b703e1 I gave get_agg_clause_costs() the responsibility of
marking Aggref nodes with the appropriate aggtranstype. I failed to notice
that where it was being called from, it might see only a subset of the
Aggref nodes that were in the original targetlist. Specifically, if there
are duplicate aggregate calls in the tlist, either make_sort_input_target
or make_window_input_target might put just a single instance into the
grouping_target, and then only that instance would get marked. Fix by
moving the call back into grouping_planner(), before we start building
assorted PathTargets from the query tlist. Per report from Stefan Huehner.
Report: <20160702131056.GD3165@huehner.biz>
In commit 68fa28f77 I tried to teach SS_finalize_plan() to cope with
initPlans attached anywhere in the plan tree, by dint of moving its
handling of those into the recursion in finalize_plan(). It turns out that
that doesn't really work: if a lower-level plan node emits an initPlan
output parameter in its targetlist, it's legitimate for upper levels to
reference those Params --- and at the point where this code runs, those
references look just like the Param itself, so finalize_plan() quite
properly rejects them as being in the wrong place. We could lobotomize
the checks enough to allow that, probably, but then it's not clear that
we'd have any meaningful check for misplaced Params at all. What seems
better, at least in the near term, is to tweak standard_planner() a bit
so that initPlans are never placed anywhere but the topmost plan node
for a query level, restoring the behavior that occurred pre-9.6. Possibly
we can do better if this code is ever merged into setrefs.c: then it would
be possible to check a Param's placement only when we'd failed to replace
it with a Var referencing a child plan node's targetlist.
BTW, I'm now suspicious that finalize_plan is doing the wrong thing by
returning the node's allParam rather than extParam to be incorporated
in the parent node's set of used parameters. However, it makes no
difference given that initPlans only appear at top level, so I'll leave
that alone for now.
Another thing that emerged from this is that standard_planner() needs
to check for initPlans before deciding that it's safe to stick a Gather
node on top in force_parallel_mode mode. We previously guarded against
that by deciding the plan wasn't wholePlanParallelSafe if any subplans
had been found, but after commit 5ce5e4a12 it's necessary to have this
substitute test, because path parallel_safe markings don't account for
initPlans. (Normally, we'd have decided the paths weren't safe anyway
due to appearances of SubPlan nodes, Params, or CTE scans somewhere in
the tree --- but it's possible for those all to be optimized away while
initPlans still remain.)
Per fuzz testing by Andreas Seltenreich.
Report: <874m89rw7x.fsf@credativ.de>
As of 9.6, pg_regress doesn't build unless storage/lwlocknames.h has been
created; but there was nothing forcing that to happen if you just went into
src/test/regress/ and built there. We previously had a similar complaint
about plpython.
To fix in a way that won't break next time we invent a generated header,
make src/backend/Makefile expose a phony target for updating all the
include files it builds, and invoke that before building pg_regress or
plpython. In principle, maybe we ought to invoke that everywhere; but
it would add a lot of usually-useless make cycles, so let's just do it
in the places where people have complained.
I made a couple of cosmetic adjustments in src/backend/Makefile as well,
to deal with the generated headers in consistent orders.
Michael Paquier and Tom Lane
Report: <31398.1467036827@sss.pgh.pa.us>
Report: <20150916200959.GB32090@msg.df7cb.de>
Commit 3fc6e2d7f5 introduced new "upper"
RelOptInfo structures but didn't set consider_parallel for them
correctly, a point I completely missed when reviewing it. Later,
commit e06a38965b made the situation
worse by doing it incorrectly for the grouping relation. Try to
straighten all of that out. Along the way, get rid of the annoying
wholePlanParallelSafe flag, which was only necessarily because of
the fact that upper planning stages didn't use paths at the time
that code was written.
The most important immediate impact of these changes is that
force_parallel_mode will provide useful test coverage in quite a few
more scenarios than it did previously, but it's also necessary
preparation for fixing some problems related to subqueries.
Patch by me, reviewed by Tom Lane.
In non-text output formats, parallelized aggregates were reporting
"Partial" or "Finalize" as a field named "Operation", which might be all
right in the absence of any context --- but other plan node types use that
field to report SQL-visible semantics, such as Select/Insert/Update/Delete.
So that naming choice didn't seem good to me. I changed it to "Partial
Mode".
Also, the field did not appear at all for a non-parallelized Agg plan node,
which is contrary to expectation in non-text formats. We're notionally
producing objects that conform to a schema, so the set of fields for a
given node type and EXPLAIN mode should be well-defined. I set it up to
fill in "Simple" in such cases.
Other fields that were added for parallel query, namely "Parallel Aware"
and Gather's "Single Copy", had not gotten the word on that point either.
Make them appear always in non-text output.
Also, the latter two fields were nominally producing boolean output, but
were getting it wrong, because bool values shouldn't be quoted in JSON or
YAML. Somehow we'd not needed an ExplainPropertyBool formatting subroutine
before 9.6; but now we do, so invent it.
Discussion: <16002.1466972724@sss.pgh.pa.us>
Since get_relation_foreign_keys doesn't try to determine whether RTEs
are actually part of the query semantics, it might make FK info records
linking to RTEs that won't have a RelOptInfo at all. Cope with that.
Per bug #14219 from Andrew Gierth.
Report: <20160629183338.1397.43514@wrigleys.postgresql.org>
If we need to use a gating Result node for pseudoconstant quals,
create_scan_plan() intentionally suppresses use_physical_tlist's checks
on whether there are matches for sortgroupref labels, on the grounds that
we don't need matches because we can label the Result's projection output
properly. However, it then called apply_pathtarget_labeling_to_tlist
anyway. This oversight was harmless when written, but in commit aeb9ae645
I made that function throw an error if there was no match. Thus, the
combination of a table scan, pseudoconstant quals, and a non-simple-Var
sortgroupref column threw the dreaded "ORDER/GROUP BY expression not found
in targetlist" error. To fix, just skip applying the labeling in this
case. Per report from Rushabh Lathia.
Report: <CAGPqQf2iLB8t6t-XrL-zR233DFTXxEsfVZ4WSqaYfLupEoDxXA@mail.gmail.com>
Previously, these commands always planned the given query and went through
executor startup before deciding not to actually run the query if WITH NO
DATA is specified. This behavior is problematic for pg_dump because it
may cause errors to be raised that we would rather not see before a
REFRESH MATERIALIZED VIEW command is issued. See for example bug #13907
from Marian Krucina. This change is not sufficient to fix that particular
bug, because we also need to tweak pg_dump to issue the REFRESH later,
but it's a necessary step on the way.
A user-visible side effect of doing things this way is that the returned
command tag for WITH NO DATA cases will now be "CREATE MATERIALIZED VIEW"
or "CREATE TABLE AS", not "SELECT 0". We could preserve the old behavior
but it would take more code, and arguably that was just an implementation
artifact not intended behavior anyhow.
In 9.5 and HEAD, also get rid of the static variable CreateAsReladdr, which
was trouble waiting to happen; there is not any prohibition on nested
CREATE commands.
Back-patch to 9.3 where CREATE MATERIALIZED VIEW was introduced.
Michael Paquier and Tom Lane
Report: <20160202161407.2778.24659@wrigleys.postgresql.org>
<-> operator now have higher predecence than & (AND) operator. This change
was motivated by unexpected difference of similar queries:
'a & b <-> c'::tsquery and 'b <-> c & a'. Before first query means
(a & b) <-> c and second one - '(b <-> c) & a', now phrase operator evaluates
first.
Per suggestion from Tom Lane 32260.1465402409@sss.pgh.pa.us
If there is no positional information of lexemes then phrase operator will not
fallback to AND operator. This change makes needing to modify TS_execute()
interface, because somewhere (in indexes, for example) positional information
is unaccesible and in this cases we need to force fallback to AND.
Per discussion c19fcfec308e6ccd952cdde9e648b505@mail.gmail.com
The original specification for this called for the deserialization function
to have signature "deserialize(serialtype) returns transtype", which is a
security violation if transtype is INTERNAL (which it always would be in
practice) and serialtype is not (which ditto). The patch blithely overrode
the opr_sanity check for that, which was sloppy-enough work in itself,
but the indisputable reason this cannot be allowed to stand is that CREATE
FUNCTION will reject such a signature and thus it'd be impossible for
extensions to create parallelizable aggregates.
The minimum fix to make the signature type-safe is to add a second, dummy
argument of type INTERNAL. But to lock it down a bit more and make misuse
of INTERNAL-accepting functions less likely, let's get rid of the ability
to specify a "serialtype" for an aggregate and just say that the only
useful serialtype is BYTEA --- which, in practice, is the only interesting
value anyway, due to the usefulness of the send/recv infrastructure for
this purpose. That means we only have to allow "serialize(internal)
returns bytea" and "deserialize(bytea, internal) returns internal" as
the signatures for these support functions.
In passing fix bogus signature of int4_avg_combine, which I found thanks
to adding an opr_sanity check on combinefunc signatures.
catversion bump due to removing pg_aggregate.aggserialtype and adjusting
signatures of assorted built-in functions.
David Rowley and Tom Lane
Discussion: <27247.1466185504@sss.pgh.pa.us>
The annotation for "ERROR: language "foo" is not trusted" used to say
"HINT: Only superusers can use untrusted languages", which was fairly
poorly thought out. For one thing, it's not a hint about what to do,
but a statement of fact, which makes it errdetail. But also, this
fails to clarify things much, because there's a missing step in the
chain of reasoning. I think it's more useful to say "GRANT and REVOKE
are not allowed on untrusted languages, because only superusers can use
untrusted languages".
It's been like this for a long time, but given the lack of previous
complaints, I don't think this is worth back-patching.
Discussion: <1417.1466289901@sss.pgh.pa.us>
The previous code neglected the fact that the scanjoin_target might
carry sortgroupref labelings that we need to absorb. Instead, do
create_projection_path() unconditionally, and tweak the path's cost
estimate after the fact. (I'm now convinced that we ought to refactor
the way we account for sometimes not needing a separate projection step,
but right now is not the time for that sort of cleanup.)
Problem identified by Amit Kapila, patch by me.
Commit 04ae11f62e removed some broken
code to apply the scan/join target to partial paths, but its theory
that this processing step is totally unnecessary turns out to be wrong.
Put similar code back again, but this time, check for parallel-safety
and avoid in-place modifications to paths that may already have been
used as part of some other path.
(This is not an entirely elegant solution to this problem; it might
be better, for example, to postpone generate_gather_paths for the
topmost scan/join rel until after the scan/join target has been
applied. But this is not the time for such redesign work.)
Amit Kapila and Robert Haas
If you really want to vacuum every single page in the relation,
regardless of apparent visibility status or anything else, you can use
this option. In previous releases, this behavior could be achieved
using VACUUM (FREEZE), but because we can now recognize all-frozen
pages as not needing to be frozen again, that no longer works. There
should be no need for routine use of this option, but maybe bugs or
disaster recovery will necessitate its use.
Patch by me, reviewed by Andres Freund.
In commit 8c1d9d56e9, I attempted to
add a regression test that would fail if the target list was pushed
into a parallel worker, but due to brain fade on my part, it just
randomly fails whether anything bad or not, because the error check
inside the parallel_restricted() function tests whether there is
*any process in the system* that is not connected to a client, not
whether the process running the query is not connected to a client.
A little experimentation has left me pessimistic about the
prospects of doing better here in a short amount of time, so let's
just fall back to checking that the plan is as we expect and leave
the execution-time check for another day.
Commit 14a254fb52 managed not to
exercise the code it was intended to test, and the comment explaining
why no "parallel worker" line showed up in the context wasn't right.
Amit Kapila, tweaked by me per Amit's analysis.
To achieve this, ANALYZE the data table before querying it, as suggested
by Tom Lane. On my system, this enables the test to pass with 128 kB of
work_mem (a value with which other tests fail -- so it seems good
enough).
Reported by Michaël Paquier.
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
dumpAccessMethod() didn't get the memo that we now have a bitfield for
the components which should be dumped instead of a simple boolean.
Correct that by checking if the relevant bit is set for each component
being dumped out (and not dumping it out if it isn't set).
This corrects an issue where CREATE ACCESS METHOD commands were being
included in non-binary-upgrades when an extension included an access
method (as the bloom extensions does).
Also add a regression test to make sure that we only dump out the
ACCESS METHOD commands, when they are part of an extension, when doing
a binary upgrade.
Pointed out by Thom Brown.
Further thought about bug #14174 motivated me to try the case of a
R/W datum being returned from a VALUES list, and sure enough it was
broken. Fix that.
Also add a regression test case exercising the same scenario for
FunctionScan. That's not broken right now, because the function's
result will get shoved into a tuplestore between generation and use;
but it could easily become broken whenever we get around to optimizing
FunctionScan better.
There don't seem to be any other places where we put the result of
expression evaluation into a virtual tuple slot that could then be
the source for Vars of further expression evaluation, so I think
this is the end of this bug.
If a plan node output expression returns an "expanded" datum, and that
output column is referenced in more than one place in upper-level plan
nodes, we need to ensure that what is returned is a read-only reference
not a read/write reference. Otherwise one of the referencing sites could
scribble on or even delete the expanded datum before we have evaluated the
others. Commit 1dc5ebc907, which introduced this feature, supposed
that it'd be sufficient to make SubqueryScan nodes force their output
columns to read-only state. The folly of that was revealed by bug #14174
from Andrew Gierth, and really should have been immediately obvious
considering that the planner will happily optimize SubqueryScan nodes
out of the plan without any regard for this issue.
The safest fix seems to be to make ExecProject() force its results into
read-only state; that will cover every case where a plan node returns
expression results. Actually we can delegate this to ExecTargetList()
since we can recursively assume that plain Vars will not reference
read-write datums. That should keep the extra overhead down to something
minimal. We no longer need ExecMakeSlotContentsReadOnly(), which was
introduced only in support of the idea that just a few plan node types
would need to do this.
In the future it would be nice to have the planner account for this problem
and inject force-to-read-only expression evaluation nodes into only the
places where there's a risk of multiple evaluation. That's not a suitable
solution for 9.5 or even 9.6 at this point, though.
Report: <20160603124628.9932.41279@wrigleys.postgresql.org>
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
The IF EXISTS option was documented, and implemented in the grammar, but
it didn't actually work for lack of support in does_not_exist_skipping().
Per bug #14160.
Report and patch by Kouhei Sutou
Report: <20160527070433.19424.81712@wrigleys.postgresql.org>
As part of upper planner pathification (commit 3fc6e2d7f5) I redid
createplan.c's approach to the physical-tlist optimization, in which scan
nodes are allowed to return exactly the underlying table's columns so as
to save doing a projection step at runtime. The logic was intentionally
more aggressive than before about applying the optimization, which is
generally a good thing, but Andres Freund found a case in which it got
too aggressive. Namely, if any column is referenced more than once in
the parent plan node's sorting or grouping column list, we can't optimize
because then that column would need to have more than one ressortgroupref
label, and we only have space for one.
Add logic to detect this situation in use_physical_tlist(), and also add
some error checking in apply_pathtarget_labeling_to_tlist(), which this
example proves was being overly cavalier about whether what it was doing
made any sense.
The added test case exposes the problem only because we do not eliminate
duplicate grouping keys. That might be something to fix someday, but it
doesn't seem like appropriate post-beta work.
Report: <20160526021235.w4nq7k3gnheg7vit@alap3.anarazel.de>
All of the other tables used in the query in dumpTable(), which is
collecting column-level ACLs, are qualified, so we should be qualifying
the pg_init_privs, the related sub-select against pg_class and the
other queries added by the pg_dump catalog ACLs work.
Also, use ::regclass (or ::pg_catalog.regclass, where appropriate)
instead of using a poorly constructed query to get the OID for various
catalog tables.
Issues identified by Noah and Alvaro, patch by me.
subquery_planner() failed to apply expression preprocessing to the
arbiterElems and arbiterWhere fields of an OnConflictExpr. No doubt the
theory was that this wasn't necessary because we don't actually try to
execute those expressions; but that's wrong, because it results in failure
to match to index expressions or index predicates that are changed at all
by preprocessing. Per bug #14132 from Reynold Smith.
Also add pullup_replace_vars processing for onConflictWhere. Perhaps
it's impossible to have a subquery reference there, but I'm not exactly
convinced; and even if true today it's a failure waiting to happen.
Also add some comments to other places where one or another field of
OnConflictExpr is intentionally ignored, with explanation as to why it's
okay to do so.
Also, catalog/dependency.c failed to record any dependency on the named
constraint in ON CONFLICT ON CONSTRAINT, allowing such a constraint to
be dropped while rules exist that depend on it, and allowing pg_dump to
dump such a rule before the constraint it refers to. The normal execution
path managed to error out reasonably for a dangling constraint reference,
but ruleutils.c dumped core; so in addition to fixing the omission, add
a protective check in ruleutils.c, since we can't retroactively add a
dependency in existing databases.
Back-patch to 9.5 where this code was introduced.
Report: <20160510190350.2608.48667@wrigleys.postgresql.org>
The test_pg_dump extension doesn't have a C component, so we need
to exclude it from the MSVC build system trying to figure out how
to build it.
Also add a "MODULES" line to the Makefile, as test_extensions has.
Might not be necessary, but seems good to keep things consistent.
Lastly, remove the 'installcheck' line from test_pg_dump, as that
was causing redefinition errors, at least on my box. This also
makes test_pg_dump consistent with how commit_ts is set up.
The Makefile for test_pg_dump shouldn't have a MODULES_big line
because there's no actual compiled bit for that extension. Hopefully
this will fix the Windows buildfarm members which were complaining.
In passing, also add the 'prove_installcheck' bit to the pg_dump and
test_pg_dump Makefiles, to get the buildfarm members to actually run
those tests.
Default roles really should be like regular roles, for the most part.
This removes a number of checks that were trying to make default roles
extra special by not allowing them to be used as regular roles.
We still prevent users from creating roles in the "pg_" namespace or
from altering roles which exist in that namespace via ALTER ROLE, as
we can't preserve such changes, but otherwise the roles are very much
like regular roles.
Based on discussion with Robert and Tom.
This TAP test suite will create a new cluster, populate it based on
the 'create_sql' values in the '%tests' hash, run all of the runs
defined in the '%pgdump_runs' hash, and then for each test in the
'%tests' hash, compare each run's output the the regular expression
defined for the test under the 'like' and 'unlike' functions, as
appropriate.
While this test suite covers a fair bit of ground (67% of pg_dump.c
and quite a bit of the other files in src/bin/pg_dump), there is
still quite a bit which remains to be added to provide better code
coverage. Still, this is quite a bit better than we had, and has
found a few bugs already (note that the CREATE TRANSFORM test is
commented out, as it is currently failing).
Idea for using the TAP system from Tom, though all of the code is mine.
The similarity of the original names to SQL keywords seems like a bad
idea. Rename them before we're stuck with 'em forever.
In passing, minor code and docs cleanup.
Discussion: <4875.1462210058@sss.pgh.pa.us>
Commit 7d9a4737c2 greatly improved the
accuracy of the numeric transcendental functions, however it failed to
consider the case where the result from pow() is close to the overflow
threshold, for example 0.12 ^ -2345.6. For such inputs, where the
result has more than 2000 digits before the decimal point, the decimal
result weight estimate was being clamped to 2000, leading to a loss of
precision in the final calculation.
Fix this by replacing the clamping code with an overflow test that
aborts the calculation early if the final result is sure to overflow,
based on the overflow limit in exp_var(). This provides the same
protection against integer overflow in the subsequent result scale
computation as the original clamping code, but it also ensures that
precision is never lost and saves compute cycles in cases that are
sure to overflow.
The new early overflow test works with the initial low-precision
result (expected to be accurate to around 8 significant digits) and
includes a small fuzz factor to ensure that it doesn't kick in for
values that would not overflow exp_var(), so the overall overflow
threshold of pow() is unchanged and consistent for all inputs with
non-integer exponents.
Author: Dean Rasheed
Reviewed-by: Tom Lane
Discussion: http://www.postgresql.org/message-id/CAEZATCUj3U-cQj0jjoia=qgs0SjE3auroxh8swvNKvZWUqegrg@mail.gmail.com
See-also: http://www.postgresql.org/message-id/CAEZATCV7w+8iB=07dJ8Q0zihXQT1semcQuTeK+4_rogC_zq5Hw@mail.gmail.com
This reverts commits f07d18b6e9, 82c83b3372, 3a3b309041, and
24c5f1a103.
This feature has shown enough immaturity that it was deemed better to
rip it out before rushing some more fixes at the last minute. There are
discussions on larger changes in this area for the next release.
Given a three-or-more-way equivalence class, such as X.Y = Y.Y = Z.Z,
it was possible for the planner to omit one of the quals needed to
enforce that all members of the equivalence class are actually equal.
This only happened in the case of a parameterized join node for two
of the relations, that is a plan tree like
Nested Loop
-> Scan X
-> Nested Loop
-> Scan Y
-> Scan Z
Filter: Z.Z = X.X
The eclass machinery normally expects to apply X.X = Y.Y when those
two relations are joined, but in this shape of plan tree they aren't
joined until the top node --- and, if the lower nested loop is marked
as parameterized by X, the top node will assume that the relevant eclass
condition(s) got pushed down into the lower node. On the other hand,
the scan of Z assumes that it's only responsible for constraining Z.Z
to match any one of the other eclass members. So one or another of
the required quals sometimes fell between the cracks, depending on
whether consideration of the eclass in get_joinrel_parampathinfo()
for the lower nested loop chanced to generate X.X = Y.Y or X.X = Z.Z
as the appropriate constraint there. If it generated the latter,
it'd erroneously suppose that the Z scan would take care of matters.
To fix, force X.X = Y.Y to be generated and applied at that join node
when this case occurs.
This is *extremely* hard to hit in practice, because various planner
behaviors conspire to mask the problem; starting with the fact that the
planner doesn't really like to generate a parameterized plan of the
above shape. (It might have been impossible to hit it before we
tweaked things to allow this plan shape for star-schema cases.) Many
thanks to Alexander Kirkouski for submitting a reproducible test case.
The bug can be demonstrated in all branches back to 9.2 where parameterized
paths were introduced, so back-patch that far.
The previous coding here was formally undefined, though it seems to
accidentally work on most platforms in the buildfarm. Caught by some
OpenBSD platforms in which libc contains an assertion check for
overlapping areas passed to memcpy().
Thomas Munro
Previously, database clusters created by a TAP test were shut down by
DESTROY methods attached to the PostgresNode objects representing them.
The trouble with that is that if the objects survive into the final global
destruction phase (which they do), Perl executes the DESTROY methods in an
unspecified order. Thus, the order of shutdown of multiple clusters was
indeterminate, which might lead to not-very-reproducible errors getting
logged (eg from a slave whose master might or might not get killed first).
Worse, the File::Temp objects representing the temporary PGDATA directories
might get destroyed before the PostgresNode objects, resulting in attempts
to delete PGDATA directories that still have live servers in them. On
Windows, this would lead to directory deletion failures; on Unix, it
usually had no effects worse than erratic "could not open temporary
statistics file "pg_stat/global.tmp": No such file or directory" log
messages.
While none of this would affect the reported result of the TAP test, which
is already determined, it could be very confusing when one is trying to
understand from the logs what went wrong with a failed test.
To fix, do the postmaster shutdowns in an END block rather than at object
destruction time. The END block will execute at a well-defined (and
reasonable) time during script termination, and it will stop the
postmasters in order of PostgresNode object creation. (Perhaps we should
change that to be reverse order of creation, but the main point here is
that we now have control which we did not before.) Use "pg_ctl stop", not
an asynchronous kill(SIGQUIT), so that we wait for the postmasters to shut
down before proceeding with directory deletion.
Deletion of temporary directories still happens in an unspecified order
during global destruction, but I can see no reason to care about that
once the postmasters are stopped.
Commit fab84c7787 tried to get away without doing an actual bind(),
but buildfarm results show that that doesn't get the job done. So we must
really bind to the target port --- and at least on my Linux box, we need a
listen() as well, or conflicts won't be detected. We rely on SO_REUSEADDR
to prevent problems from starting a postmaster on the socket immediately
after we've bound to it in the test code. (There may be platforms where
that doesn't work too well. But fortunately, we only really care whether
this works on Windows, and there the default behavior should be OK.)
Buildfarm members bowerbird and jacana have shown intermittent "could not
bind IPv4 socket" failures in the BinInstallCheck stage since mid-December,
shortly after commits 1caef31d9e and 9821492ee4 changed the
logic for selecting which port to use in temporary installations. One
plausible explanation is that we are randomly selecting ports that are
already in use for some non-Postgres purpose. Although the code tried
to defend against already-in-use ports, it used pg_isready to probe
the port which is quite unhelpful: if some non-Postgres server responds
at the given address, pg_isready will generally say "no response",
leading to exactly the wrong conclusion about whether the port is free.
Instead, let's use a simple TCP connect() call to see if anything answers
without making assumptions about what it is. Note that this means there's
no direct check for a conflicting Unix socket, but that should be okay
because there should be no other Unix sockets in use in the temporary
socket directory created for a test run.
This is only a partial solution for the TCP case, since if the port number
is in use for an outgoing connection rather than a listening socket, we'll
fail to detect that. We could try to bind() to the proposed port as a
means of detecting that case, but that would introduce its own failure
modes, since the system might consider the address to remain reserved for
some period of time after we drop the bound socket. Close study of the
errors returned by bowerbird and jacana suggests that what we're seeing
there may be conflicts with listening not outgoing sockets, so let's try
this and see if it improves matters. It's certainly better than what's
there now, in any case.
Michael Paquier, adjusted by me to work on non-Windows as well as Windows
Given a left join containing a full join in its righthand side, with
the left join's joinclause referencing only one side of the full join
(in a non-strict fashion, so that the full join doesn't get simplified),
the planner could fail with "failed to build any N-way joins" or related
errors. This happened because the full join was seen as overlapping the
left join's RHS, and then recent changes within join_is_legal() caused
that function to conclude that the full join couldn't validly be formed.
Rather than try to rejigger join_is_legal() yet more to allow this,
I think it's better to fix initsplan.c so that the required join order
is explicit in the SpecialJoinInfo data structure. The previous coding
there essentially ignored full joins, relying on the fact that we don't
flatten them in the joinlist data structure to preserve their ordering.
That's sufficient to prevent a wrong plan from being formed, but as this
example shows, it's not sufficient to ensure that the right plan will
be formed. We need to work a bit harder to ensure that the right plan
looks sane according to the SpecialJoinInfos.
Per bug #14105 from Vojtech Rylko. This was apparently induced by
commit 8703059c6 (though now that I've seen it, I wonder whether there
are related cases that could have failed before that); so back-patch
to all active branches. Unfortunately, that patch also went into 9.0,
so this bug is a regression that won't be fixed in that branch.
When we shoehorned "x op ANY (array)" into the SQL syntax, we created a
fundamental ambiguity as to the proper treatment of a sub-SELECT on the
righthand side: perhaps what's meant is to compare x against each row of
the sub-SELECT's result, or perhaps the sub-SELECT is meant as a scalar
sub-SELECT that delivers a single array value whose members should be
compared against x. The grammar resolves it as the former case whenever
the RHS is a select_with_parens, making the latter case hard to reach ---
but you can get at it, with tricks such as attaching a no-op cast to the
sub-SELECT. Parse analysis would throw away the no-op cast, leaving a
parsetree with an EXPR_SUBLINK SubLink directly under a ScalarArrayOpExpr.
ruleutils.c was not clued in on this fine point, and would naively emit
"x op ANY ((SELECT ...))", which would be parsed as the first alternative,
typically leading to errors like "operator does not exist: text = text[]"
during dump/reload of a view or rule containing such a construct. To fix,
emit a no-op cast when dumping such a parsetree. This might well be
exactly what the user wrote to get the construct accepted in the first
place; and even if she got there with some other dodge, it is a valid
representation of the parsetree.
Per report from Karl Czajkowski. He mentioned only a case involving
RLS policies, but actually the problem is very old, so back-patch to
all supported branches.
Report: <20160421001832.GB7976@moraine.isi.edu>
In commit 2ffa869620 we made pg_ctl recognize an environment variable
PGCTLTIMEOUT to set the default timeout for starting and stopping the
postmaster. However, pg_regress uses pg_ctl only for the "stop" end of
that; it has bespoke code for starting the postmaster, and that code has
historically had a hard-wired 60-second timeout. Further buildfarm
experience says it'd be a good idea if that timeout were also controlled
by PGCTLTIMEOUT, so let's make it so. Like the previous patch, back-patch
to all active branches.
Discussion: <13969.1461191936@sss.pgh.pa.us>
Print the actual value of each function result that's expected to be exact,
rather than merely emitting a NULL if it's not right. Although we print
these with extra_float_digits = 3, we should not trust that the platform
will produce a result visibly different from the expected value if it's off
only in the last place; hence, also include comparisons against the exact
values as before. This is a bit bulkier and uglier than the previous
printout, but it will provide more information and be easier to interpret
if there's a test failure.
Discussion: <18241.1461073100@sss.pgh.pa.us>
Although OID acts pretty much like user data, the other system columns do
not, so an index on one would likely misbehave. And it's pretty hard to
see a use-case for one, anyway. Let's just forbid the case rather than
worry about whether it should be supported.
David Rowley
For reasons of sheer brain fade, we (I) was calling systable_endscan()
immediately after systable_getnext() and expecting the tuple returned
by systable_getnext() to still be valid.
That's clearly wrong. Move the systable_endscan() down below the tuple
usage.
Discovered initially by Pavel Stehule and then also by Alvaro.
Add a regression test based on Alvaro's testing.
The original coding of this test used table and view names like "t",
"tv", "foo", etc. This tended to interfere with doing simple manual
tests in the regression database; not to mention that it posed a
considerable risk of conflict with other regression test scripts.
Prefix these names with "mvtest_" to avoid such conflicts.
Also, change transiently-created role name to be "regress_xxx" per
discussions about being careful with regression-test role creation.
Careless coding added by commit 07cacba983 could result in a crash
or a bizarre error message if someone tried to select an index on the
OID column as the replica identity index for a table. Back-patch to 9.4
where the feature was introduced.
Discussion: CAKJS1f8TQYgTRDyF1_u9PVCKWRWz+DkieH=U7954HeHVPJKaKg@mail.gmail.com
David Rowley
The regression test checks whether the output of pg_stat_replication is
expected or not after changing synchronous_standby_names and reloading
the configuration file. Regarding this test logic, previously there was
a timing issue which made the test result unstable. That is,
pg_stat_replication could return unexpected result during small window
after the configuration file was reloaded before new setting value
took effect, and which made the test fail.
This commit changes the test logic so that it uses a loop with a timeout
to give some room for the test to pass. Now the test fails only when
pg_stat_replication keeps returning unexpected result for 30 seconds.
Michael Paquier
\crosstabview interpreted its arguments in an unusual way, including
doing case-insensitive matching of unquoted column names, which is
surely not the right thing. Rip that out in favor of doing something
equivalent to the dequoting/case-folding rules used by other psql
commands. To keep it simple, change the syntax so that the optional
sort column is specified as a separate argument, instead of the
also-quite-unusual syntax that attached it to the colH argument with
a colon.
Also, rework the error messages to be closer to project style.
For a long time, opclasscmds.c explained that "we do not create a
dependency link to the AM [for an opclass or opfamily], because we don't
currently support DROP ACCESS METHOD". Commit 473b932870 invented
DROP ACCESS METHOD, but it batted only 1 for 2 on adding the dependency
links, and 0 for 2 on updating the comments about the topic.
In passing, undo the same commit's entirely inappropriate decision to
blow away an existing index as a side-effect of create_am.sql.
Everyplace else thinks it's _WIN64, so make these places fall in line.
The pg_regress.c usage is not going to result in any change in behavior,
only suppressing (or not) a compiler warning about downcasting HANDLEs.
So there seems no need for back-patching there.
The libpq/win32.mak usage might represent an actual bug, if anyone were
using this script to build for Windows64, which perhaps nobody is.
Given the lack of field complaints, no back-patch here either.
pg_regress.c problem found by Christian Ullrich, the other by me.
To avoid any possible overlap with existing roles on a system when
doing a 'make installcheck', use role names which start with
'regress_'.
Pointed out by Tom.
\crosstabview is a completely different way to display results from a
query: instead of a vertical display of rows, the data values are placed
in a grid where the column and row headers come from the data itself,
similar to a spreadsheet.
The sort order of the horizontal header can be specified by using
another column in the query, and the vertical header determines its
ordering from the order in which they appear in the query.
This only allows displaying a single value in each cell. If more than
one value correspond to the same cell, an error is thrown. Merging of
values can be done in the query itself, if necessary. This may be
revisited in the future.
Author: Daniel Verité
Reviewed-by: Pavel Stehule, Dean Rasheed
This creates an initial set of default roles which administrators may
use to grant access to, historically, superuser-only functions. Using
these roles instead of granting superuser access reduces the number of
superuser roles required for a system. Documention for each of the
default roles has been added to user-manag.sgml.
Bump catversion to 201604082, as we had a commit that bumped it to
201604081 and another that set it back to 201604071...
Reviews by José Luis Tallón and Robert Haas
This will prevent users from creating roles which begin with "pg_" and
will check for those roles before allowing an upgrade using pg_upgrade.
This will allow for default roles to be provided at initdb time.
Reviews by José Luis Tallón and Robert Haas
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
Output order from the pg_indexes view might vary depending on the
phase of the moon, so add ORDER BY to ensure stable results of tests
added by commit 386e3d7609.
Per buildfarm.
As noticed by Tom Lane changing operation's number in commit
bb140506df causes on-disk format incompatibility.
Revert to previous numbering, that is reason to add special array to store
priorities of operation. Also it reverts order of tsquery to previous.
Author: Dmitry Ivanov
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
In cases where joins use multiple columns we currently assess each join
separately causing gross mis-estimates for join cardinality.
This patch adds use of FK information for the first time into the
planner. When FKs are present and we have multi-column join information,
plan estimates will be drastically improved. Cases with multiple FKs
are handled, though partial matches are ignored currently.
Net effect is substantial performance improvements for joins in many
common cases. Additional planning time is isolated to cases that are
currently performing poorly, measured at 0.08 - 0.15 ms.
Please watch for planner performance regressions; circumstances seem
unlikely but the law of unintended consequences may apply somewhen.
Additional complex tests welcome to prove this before release.
Tests can be performed using SET enable_fkey_estimates = on | off
using scripts provided during Hackers discussions, message id:
552335D9.3090707@2ndquadrant.com
Authors: Tomas Vondra and David Rowley
Reviewed and tested by Simon Riggs, adding comments only
We shouldn't be adding roles during the regression tests as that can
cause back-to-back installcheck runs to fail and users running the
regression tests likley don't want those extra roles.
Pointed out by Tom
While prior to this patch the user-visible effect on the database
of any set of successfully committed serializable transactions was
always consistent with some one-at-a-time order of execution of
those transactions, the presence of declarative constraints could
allow errors to occur which were not possible in any such ordering,
and developers had no good workarounds to prevent user-facing
errors where they were not necessary or desired. This patch adds
a check for serialization failure ahead of duplicate key checking
so that if a developer explicitly (redundantly) checks for the
pre-existing value they will get the desired serialization failure
where the problem is caused by a concurrent serializable
transaction; otherwise they will get a duplicate key error.
While it would be better if the reads performed by the constraints
could count as part of the work of the transaction for
serialization failure checking, and we will hopefully get there
some day, this patch allows a clean and reliable way for developers
to work around the issue. In many cases existing code will already
be doing the right thing for this to "just work".
Author: Thomas Munro, with minor editing of docs by me
Reviewed-by: Marko Tiikkaja, Kevin Grittner
Patch introduces new text search operator (<-> or <DISTANCE>) into tsquery.
On-disk and binary in/out format of tsquery are backward compatible.
It has two side effect:
- change order for tsquery, so, users, who has a btree index over tsquery,
should reindex it
- less number of parenthesis in tsquery output, and tsquery becomes more
readable
Authors: Teodor Sigaev, Oleg Bartunov, Dmitry Ivanov
Reviewers: Alexander Korotkov, Artur Zakirov
Commit c22650cd64 sparked a discussion
about diverse interpretations of "token user" in error messages. Expel
old and new specimens of that phrase by making all GetTokenInformation()
callers report errors the way GetTokenUser() has been reporting them.
These error conditions almost can't happen, so users are unlikely to
observe this change.
Reviewed by Tom Lane and Stephen Frost.
Now that all of the infrastructure exists, add in the ability to
dump out the ACLs of the objects inside of pg_catalog or the ACLs
for objects which are members of extensions, but only if they have
been changed from their original values.
The original values are tracked in pg_init_privs. When pg_dump'ing
9.6-and-above databases, we will dump out the ACLs for all objects
in pg_catalog and the ACLs for all extension members, where the ACL
has been changed from the original value which was set during either
initdb or CREATE EXTENSION.
This should not change dumps against pre-9.6 databases.
Reviews by Alexander Korotkov, Jose Luis Tallon
This new catalog holds the privileges which the system was
initialized with at initdb time, along with any permissions set
by extensions at CREATE EXTENSION time. This allows pg_dump
(and any other similar use-cases) to detect when the privileges
set on initdb-created or extension-created objects have been
changed from what they were set to at initdb/extension-creation
time and handle those changes appropriately.
Reviews by Alexander Korotkov, Jose Luis Tallon
It inserts a new value into an jsonb array at arbitrary position or
a new key to jsonb object.
Author: Dmitry Dolgov
Reviewers: Petr Jelinek, Vitaly Burovoy, Andrew Dunstan
This introduces a new dependency type which marks an object as depending
on an extension, such that if the extension is dropped, the object
automatically goes away; and also, if the database is dumped, the object
is included in the dump output. Currently the grammar supports this for
indexes, triggers, materialized views and functions only, although the
utility code is generic so adding support for more object types is a
matter of touching the parser rules only.
Author: Abhijit Menon-Sen
Reviewed-by: Alexander Korotkov, Álvaro Herrera
Discussion: http://www.postgresql.org/message-id/20160115062649.GA5068@toroid.org
has_parallel_hazard() was ignoring the proparallel markings for
aggregates, which is no good. Fix that. There was no way to mark
an aggregate as actually being parallel-safe, either, so add a
PARALLEL option to CREATE AGGREGATE.
Patch by me, reviewed by David Rowley.
This lets us use parallel aggregate for a variety of useful cases
that didn't work before, like sum(int8), sum(numeric), several
versions of avg(), and various other functions.
Add some regression tests, as well, testing the general sanity of
these and future catalog entries.
David Rowley, reviewed by Tomas Vondra, with a few further changes
by me.
\gexec executes the just-entered query, like \g, but instead of printing
the results it takes each field as a SQL command to send to the server.
Computing a series of queries to be executed is a fairly common thing,
but up to now you always had to resort to kluges like writing the queries
to a file and then inputting the file. Now it can be done with no
intermediate step.
The implementation is fairly straightforward except for its interaction
with FETCH_COUNT. ExecQueryUsingCursor isn't capable of being called
recursively, and even if it were, its need to create a transaction
block interferes unpleasantly with the desired behavior of \gexec after
a failure of a generated query (i.e., that it can continue). Therefore,
disable use of ExecQueryUsingCursor when doing the master \gexec query.
We can still apply it to individual generated queries, however, and there
might be some value in doing so.
While testing this feature's interaction with single-step mode, I (tgl) was
led to conclude that SendQuery needs to recognize SIGINT (cancel_pressed)
as a negative response to the single-step prompt. Perhaps that's a
back-patchable bug fix, but for now I just included it here.
Corey Huinker, reviewed by Jim Nasby, Daniel Vérité, and myself
When adjusting the estimate for the number of distinct values from a
rel in a grouped query to take into account the selectivity of the
rel's restrictions, use a formula that is less likely to produce
under-estimates.
The old formula simply multiplied the number of distinct values in the
rel by the restriction selectivity, which would be correct if the
restrictions were fully correlated with the grouping expressions, but
can produce significant under-estimates in cases where they are not
well correlated.
The new formula is based on the random selection probability, and so
assumes that the restrictions are not correlated with the grouping
expressions. This is guaranteed to produce larger estimates, and of
course risks over-estimating in cases where the restrictions are
correlated, but that has less severe consequences than
under-estimating, which might lead to a HashAgg that consumes an
excessive amount of memory.
This could possibly be improved upon in the future by identifying
correlated restrictions and using a hybrid of the old and new
formulae.
Author: Tomas Vondra, with some hacking be me
Reviewed-by: Mark Dilger, Alexander Korotkov, Dean Rasheed and Tom Lane
Discussion: http://www.postgresql.org/message-id/flat/56CD0381.5060502@2ndquadrant.com
In the test_slot_timelines test module, we were abusing passing NULL
values which was received as zeroes in x86, but this breaks in ARM
(buildfarm member hamster) by crashing instead. Fix the breakage by
marking these functions as STRICT; the InvalidXid value that was
previously implicit in NULL values (on x86 at least) can now be passed
as 0. Failing to follow the fmgr protocol to check for NULLs beforehand
was causing ARM to fail, as evidenced by segmentation faults in
buildfarm member hamster.
In order to use the new functionality in the test script, use COALESCE
in the right spot to avoid forwarding NULL values.
This was diagnosed from the hamster crash by Craig Ringer, who also
proposed a different patch (checking for NULL values explicitely in the
C function code, and keeping the non-strictness in the C functions).
I decided to go with this approach instead.
Our actual convention, contrary to what I said in 59a2111b23, is not to
quote type names, as evidenced by unquoted use of format_type_be()
result value in error messages. Remove quotes from recently tweaked
messages accordingly.
Per note from Tom Lane
Commit acdf2a8b added a test case involving minus zero as a box endpoint.
This is not very portable, as evidenced by the several older buildfarm
members that are failing on the test because they print minus zero as
just "0". If there were any significant reason to test this behavior,
we could consider carrying a separate expected-file; but it doesn't look
to me like there's adequate justification to accept such a maintenance
burden. Just change the test to use plain zero, instead.
Previously this test was relying too much on WAL replay to occur in the
exact configured interval, which was unreliable on slow or overly busy
servers. Use a custom loop instead of poll_query_until, which is
hopefully more reliable.
Per continued failures on buildfarm member hamster (which is probably
the only one running this test suite)
Author: Michaël Paquier
Previously, the planner would reject an index-only scan if any restriction
clause for its table used a column not available from the index, even
if that restriction clause would later be dropped from the plan entirely
because it's implied by the index's predicate. This is a fairly common
situation for partial indexes because predicates using columns not included
in the index are often the most useful kind of predicate, and we have to
duplicate (or at least imply) the predicate in the WHERE clause in order
to get the index to be considered at all. So index-only scans were
essentially unavailable with such partial indexes.
To fix, we have to do detection of implied-by-predicate clauses much
earlier in the planner. This patch puts it in check_index_predicates
(nee check_partial_indexes), meaning it gets done for every partial index,
whereas we previously only considered this issue at createplan time,
so that the work was only done for an index actually selected for use.
That could result in a noticeable planning slowdown for queries against
tables with many partial indexes. However, testing suggested that there
isn't really a significant cost, especially not with reasonable numbers
of partial indexes. We do get a small additional benefit, which is that
cost_index is more accurate since it correctly discounts the evaluation
cost of clauses that will be removed. We can also avoid considering such
clauses as potential indexquals, which saves useless matching cycles in
the case where the predicate columns aren't in the index, and prevents
generating bogus plans that double-count the clause's selectivity when
the columns are in the index.
Tomas Vondra and Kyotaro Horiguchi, reviewed by Kevin Grittner and
Konstantin Knizhnik, and whacked around a little by me
When decoding from a logical slot, it's necessary for xlog reading to be
able to read xlog from historical (i.e. not current) timelines;
otherwise, decoding fails after failover, because the archives are in
the historical timeline. This is required to make "failover logical
slots" possible; it currently has no other use, although theoretically
it could be used by an extension that creates a slot on a standby and
continues to replay from the slot when the standby is promoted.
This commit includes a module in src/test/modules with functions to
manipulate the slots (which is not otherwise possible in SQL code) in
order to enable testing, and a new test in src/test/recovery to ensure
that the behavior is as expected.
Author: Craig Ringer
Reviewed-By: Oleksii Kliukin, Andres Freund, Petr Jelínek
Formerly, the geometric I/O routines such as box_in and point_out relied
directly on strtod() and sprintf() for conversion of the float8 component
values of their data types. However, the behavior of those functions is
pretty platform-dependent, especially for edge-case values such as
infinities and NaNs. This was exposed by commit acdf2a8b37, which
added test cases involving boxes with infinity endpoints, and immediately
failed on Windows and AIX buildfarm members. We solved these problems
years ago in the main float8in and float8out functions, so let's fix it
by making the geometric types use that code instead of depending directly
on the platform-supplied functions.
To do this, refactor the float8in code so that it can be used to parse
just part of a string, and as a convenience make the guts of float8out
usable without going through DirectFunctionCall.
While at it, get rid of geo_ops.c's fairly shaky assumptions about the
maximum output string length for a double, by having it build results in
StringInfo buffers instead of fixed-length strings.
In passing, convert all the "invalid input syntax for type foo" messages
in this area of the code into "invalid input syntax for type %s" to reduce
the number of distinct translatable strings, per recent discussion.
We would have needed a fair number of the latter anyway for code-sharing
reasons, so we might as well just go whole hog.
Note: this patch is by no means intended to guarantee that the geometric
types uniformly behave sanely for infinity or NaN component values.
But any bugs we have in that line were there all along, they were just
harder to reach in a platform-independent way.
Patch implements quad-tree over boxes, naive approach of 2D quad tree will not
work for any non-point objects because splitting space on node is not
efficient. The idea of pathc is treating 2D boxes as 4D points, so,
object will not overlap (in 4D space).
The performance tests reveal that this technique especially beneficial
with too much overlapping objects, so called "spaghetti data".
Author: Alexander Lebedev with editorization by Emre Hasegeli and me
Reporting the specific out-of-range input value produces platform-dependent
results. We could skip reporting the value, but that's contrary to our
message style guidelines and unhelpful to users. Or we could add a
separate expected-output file for Windows, but that would be a substantial
maintenance burden, and these test cases seem unlikely to be worth it.
Per buildfarm.
With the original SQL-function implementation, such cases failed because
we don't support infinite intervals. Converting the function to C lets
us bypass the interval representation, which should be a bit faster as
well as more flexible.
Vitaly Burovoy, reviewed by Anastasia Lubennikova
When tsearch was implemented I did several mistakes in hostname/email
definition rules:
1) allow underscore in hostname what prohibited by RFC
2) forget to allow leading digits separated by hyphen (like 123-x.com)
in hostname
3) do no allow underscore/hyphen after leading digits in localpart of email
Artur's patch resolves two last issues, but by the way allows hosts name like
123_x.com together with 123-x.com. RFC forbids underscore usage in hostname
but pg allows that since initial tsearch version in core, although only
for non-digits. Patch syncs support digits and nondigits in both hostname and
email.
Forbidding underscore in hostname may break existsing usage of tsearch and,
anyhow, it should be done by separate patch.
Author: Artur Zakirov
BUG: #13964
Corrects an oversight in 2c83f435a3 where the $timed_out reference var
isn't initialized; using it would require the caller to initialize it
beforehand, which is cumbersome.
Author: Craig Ringer
In the plancache, we check if the environment we planned the query under
has changed in a way which requires us to re-plan, such as when the user
for whom the plan was prepared changes and RLS is being used (and,
therefore, there may be different policies to apply).
Unfortunately, while those values were set and checked, they were not
being reset when the query was re-planned and therefore, in cases where
we change role, re-plan, and then change role again, we weren't
re-planning again. This leads to potentially incorrect policies being
applied in cases where role-specific policies are used and a given query
is planned under one role and then executed under other roles, which
could happen under security definer functions or when a common user and
query is planned initially and then re-used across multiple SET ROLEs.
Further, extensions which made use of CopyCachedPlan() may suffer from
similar issues as the RLS-related fields were not properly copied as
part of the plan and therefore RevalidateCachedQuery() would copy in the
current settings without invalidating the query.
Fix by using the same approach used for 'search_path', where we set the
correct values in CompleteCachedPlan(), check them early on in
RevalidateCachedQuery() and then properly reset them if re-planning.
Also, copy through the values during CopyCachedPlan().
Pointed out by Ashutosh Bapat. Reviewed by Michael Paquier.
Back-patch to 9.5 where RLS was introduced.
Security: CVE-2016-2193
Fix up check for high-bit-set characters, which provoked "comparison is
always true due to limited range of data type" warnings on some compilers,
and was unlike the way we do it elsewhere anyway. Fix omission of "$"
from the set of valid identifier continuation characters. Get rid of
sanitize_text(), which was utterly inconsistent with any other error report
anywhere in the system, and wasn't even well designed on its own terms
(double-quoting the result string without escaping contained double quotes
doesn't seem very well thought out). Fix up error messages, which didn't
follow the message style guidelines very well, and were overly specific in
situations where the actual mistake might not be what they said. Improve
documentation.
(I started out just intending to fix the compiler warning, but the more
I looked at the patch the less I liked it.)
This avoids leaving dangling links in pg_operator; which while fairly
harmless are also unsightly.
While we're at it, simplify OperatorUpd, which went through
heap_modify_tuple for no very good reason considering it had already made
a tuple copy it could just scribble on.
Roma Sokolov, reviewed by Tomas Vondra, additional hacking by Robert Haas
and myself.
In commit 9118d03a8c we taught the planner to postpone evaluation of
set-returning functions in a SELECT's targetlist until after any sort done
to satisfy ORDER BY. However, if we postpone some SRFs this way while
others do not get postponed (because they're sort or group key columns)
we will break the traditional behavior by which all SRFs in the tlist run
in-step during ExecTargetList(), so that you get the least common multiple
of their periods not the product. Fix make_sort_input_target() so it will
not split up SRF evaluation in such cases.
There is still a hazard of similar odd behavior if there's a SRF in a
grouping column and another one that isn't, but that was true before
and we're just trying to preserve bug-compatibility with the traditional
behavior. This whole area is overdue to be rethought and reimplemented,
but we'll try to avoid changing behavior until then.
Per report from Regina Obe.
This enables external code to create access methods. This is useful so
that extensions can add their own access methods which can be formally
tracked for dependencies, so that DROP operates correctly. Also, having
explicit support makes pg_dump work correctly.
Currently only index AMs are supported, but we expect different types to
be added in the future.
Authors: Alexander Korotkov, Petr Jelínek
Reviewed-By: Teodor Sigaev, Petr Jelínek, Jim Nasby
Commitfest-URL: https://commitfest.postgresql.org/9/353/
Discussion: https://www.postgresql.org/message-id/CAPpHfdsXwZmojm6Dx+TJnpYk27kT4o7Ri6X_4OSWcByu1Rm+VA@mail.gmail.com
User-facing (even tested by regression tests) error conditions were thrown
with elog(), hence had wrong SQLSTATE and were untranslatable. And the
error message texts weren't up to project style, either.
In commit afb9249d06, we (probably I) made ExecLockRows assign
null test tuples to all relations of the query while setting up to do an
EvalPlanQual recheck for a newly-updated locked row. This was sheerest
brain fade: we should only set test tuples for relations that are lockable
by the LockRows node, and in particular empty test tuples are only sensible
for inheritance child relations that weren't the source of the current
tuple from their inheritance tree. Setting a null test tuple for an
unrelated table causes it to return NULLs when it should not, as exhibited
in bug #14034 from Bronislav Houdek. To add insult to injury, doing it the
wrong way required two loops where one would suffice; so the corrected code
is even a bit shorter and faster.
Add a regression test case based on his example, and back-patch to 9.5
where the bug was introduced.
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
In HEAD, fix incorrect field width for hours part of OF when tm_gmtoff is
negative. This was introduced by commit 2d87eedc1d as a result of
falsely applying a pattern that's correct when + signs are omitted, which
is not the case for OF.
In 9.4, fix missing abs() call that allowed a sign to be attached to the
minutes part of OF. This was fixed in 9.5 by 9b43d73b3f, but for
inscrutable reasons not back-patched.
In all three versions, ensure that the sign of tm_gmtoff is correctly
reported even when the GMT offset is less than 1 hour.
Add regression tests, which evidently we desperately need here.
Thomas Munro and Tom Lane, per report from David Fetter
Tighten the semantics of boundary-case timestamptz so that we allow
timestamps >= '4714-11-24 00:00+00 BC' and < 'ENDYEAR-01-01 00:00+00 AD'
exactly, no more and no less, but it is allowed to enter timestamps
within that range using non-GMT timezone offsets (which could make the
nominal date 4714-11-23 BC or ENDYEAR-01-01 AD). This eliminates
dump/reload failure conditions for timestamps near the endpoints.
To do this, separate checking of the inputs for date2j() from the
final range check, and allow the Julian date code to handle a range
slightly wider than the nominal range of the datatypes.
Also add a bunch of checks to detect out-of-range dates and timestamps
that formerly could be returned by operations such as date-plus-integer.
All C-level functions that return date, timestamp, or timestamptz should
now be proof against returning a value that doesn't pass IS_VALID_DATE()
or IS_VALID_TIMESTAMP().
Vitaly Burovoy, reviewed by Anastasia Lubennikova, and substantially
whacked around by me
There's a lot more that could be done here yet - in particular, this
reports only very coarse-grained information about the index vacuuming
phase - but even as it stands, the new pg_stat_progress_vacuum can
tell you quite a bit about what a long-running vacuum is actually
doing.
Amit Langote and Robert Haas, based on earlier work by Vinayak Pokale
and Rahila Syed.
We don't support any parallel write operations at present, so choosing
a parallel plan causes us to error out. Also, add a new regression
test that uses EXPLAIN ANALYZE SELECT INTO; if we'd had this previously,
force_parallel_mode testing would have caught this issue.
Mithun Cy and Robert Haas
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
It is frequently useful for volatile, set-returning, or expensive functions
in a SELECT's targetlist to be postponed till after ORDER BY and LIMIT are
done. Otherwise, the functions might be executed for every row of the
table despite the presence of LIMIT, and/or be executed in an unexpected
order. For example, in
SELECT x, nextval('seq') FROM tab ORDER BY x LIMIT 10;
it's probably desirable that the nextval() values are ordered the same
as x, and that nextval() is not run more than 10 times.
In the past, Postgres was inconsistent in this area: you would get the
desirable behavior if the ordering were performed via an indexscan, but
not if it had to be done by an explicit sort step. Getting the desired
behavior reliably required contortions like
SELECT x, nextval('seq')
FROM (SELECT x FROM tab ORDER BY x) ss LIMIT 10;
This patch conditionally postpones evaluation of pure-output target
expressions (that is, those that are not used as DISTINCT, ORDER BY, or
GROUP BY columns) so that they effectively occur after sorting, even if an
explicit sort step is necessary. Volatile expressions and set-returning
expressions are always postponed, so as to provide consistent semantics.
Expensive expressions (costing more than 10 times typical operator cost,
which by default would include any user-defined function) are postponed
if there is a LIMIT or if there are expressions that must be postponed.
We could be more aggressive and postpone any nontrivial expression, but
there are costs associated with doing so: it requires an extra Result plan
node which adds some overhead, and postponement changes the volume of data
going through the sort step, perhaps for the worse. Since we tend not to
have very good estimates of the output width of nontrivial expressions,
it's hard to have much confidence in our ability to predict whether
postponement would increase or decrease the cost of the sort; therefore
this patch doesn't attempt to make decisions conditionally on that.
Between these factors and a general desire not to change query behavior
when there's not a demonstrable benefit, it seems best to be conservative
about applying postponement. We might tweak the decision rules in the
future, though.
Konstantin Knizhnik, heavily rewritten by me
Adds several tsvector editting function: convert tsvector to/from text array,
set weight for given lexemes, delete lexeme(s), unnest, filter lexemes
with given weights
Author: Stas Kelvich with some editorization by me
Reviewers: Tomas Vondram, Teodor Sigaev
When a process is waiting for a heavyweight lock, we will now indicate
the type of heavyweight lock for which it is waiting. Also, you can
now see when a process is waiting for a lightweight lock - in which
case we will indicate the individual lock name or the tranche, as
appropriate - or for a buffer pin.
Amit Kapila, Ildus Kurbangaliev, reviewed by me. Lots of helpful
discussion and suggestions by many others, including Alexander
Korotkov, Vladimir Borodin, and many others.
These simple methods rely on RecursiveCopy to create a filesystem-level
backup of a server. They aren't currently used anywhere yet,but will be
useful for future tests.
Author: Craig Ringer
Reviewed-By: Michael Paquier, Salvador Fandino, Álvaro Herrera
Commitfest-URL: https://commitfest.postgresql.org/9/569/
This allows skipping copying certain files and subdirectories in tests.
This is useful in some circumstances such as copying a data directory;
future tests want this feature.
Also POD-ify the module.
Authors: Craig Ringer, Pallavi Sontakke
Reviewed-By: Álvaro Herrera
An index search using a row comparison such as ROW(a, b) > ROW('x', 'y')
would stop upon reaching a NULL entry in the "b" column, ignoring the
fact that there might be non-NULL "b" values associated with later values
of "a". This happens because _bt_mark_scankey_required() marks the
subsidiary scankey for "b" as required, which is just wrong: it's for
a column after the one with the first inequality key (namely "a"), and
thus can't be considered a required match.
This bit of brain fade dates back to the very beginnings of our support
for indexed ROW() comparisons, in 2006. Kind of astonishing that no one
came across it before Glen Takahashi, in bug #14010.
Back-patch to all supported versions.
Note: the given test case doesn't actually fail in unpatched 9.1, evidently
because the fix for bug #6278 (i.e., stopping at nulls in either scan
direction) is required to make it fail. I'm sure I could devise a case
that fails in 9.1 as well, perhaps with something involving making a cursor
back up; but it doesn't seem worth the trouble.
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
Historically, the wait_for_stats() function in this test has simply checked
for a report of an indexscan on tenk2, corresponding to the last command
issued before we expect stats updates to appear. However, with parallel
query that indexscan could be done by a parallel worker that will emit
its stats counters to the collector before the session's main backend does
(a full second before, in fact, thanks to the "pg_sleep(1.0)" added by
commit 957d08c81f). That leaves a sizable window in which an
autovacuum-triggered write of the stats files would present a state in
which the indexscan on tenk2 appears to have been done, but none of the
write updates performed by the test have been. This is evidently the
explanation for intermittent failures seen by me and on buildfarm member
mandrill.
To fix, we should check separately for both the tenk2 seqscan and indexscan
counts, since those might be reported by different processes that could be
delayed arbitrarily on an overloaded test machine. And we need to check
for at least one update-related count. If we ever allow parallel workers
to do writes, this will get even more complicated ... but in view of all
the other hard problems that will entail, I don't feel a need to solve this
one today.
Per research by Rahila Syed and myself; part of this patch is Rahila's.
Now it's possible to load recent version of Hunspell for several languages.
To handle these dictionaries Hunspell patch adds support for:
* FLAG long - sets the double extended ASCII character flag type
* FLAG num - sets the decimal number flag type (from 1 to 65535)
* AF parameter - alias for flag's set
Also it moves test dictionaries into separate directory.
Author: Artur Zakirov with editorization by me
This makes the psql() method much more capable: it captures both stdout
and stderr; it now returns the psql exit code rather than stdout; a
timeout can now be specified, as can ON_ERROR_STOP behavior; it gained a
new "on_error_die" (defaulting to off) parameter to raise an exception
if there's any problem. Finally, additional parameters to psql can be
passed if there's need for further tweaking.
For convenience, a new safe_psql() method retains much of the old
behavior of psql(), except that it uses on_error_die on, so that
problems like syntax errors in SQL commands can be detected more easily.
Many existing TAP test files now use safe_psql, which is what is really
wanted. A couple of ->psql() calls are now added in the commit_ts
tests, which verify that the right thing is happening on certain errors.
Some ->command_fails() calls in recovery tests that were verifying that
psql failed also became ->psql() calls now.
Author: Craig Ringer. Some tweaks by Álvaro Herrera
Reviewed-By: Michaël Paquier
Also, mention in README that Perl files should be perltidy'ed. This
isn't really the best place (since we have Perl files elsewhere in the
tree) and this is already in pgindent's README, but this subdir is
likely to get hacked a whole lot more than the other Perl files, so it
seems okay to spend two lines on this.
Author: Craig Ringer
One test was relying on method remove_tree that isn't implemented in the
oldest Perl we support; fix it by using the older rmtree instead.
Another test had a typo in a SQL command, which isn't noticed because
the PostgresNode->psql() method doesn't check that queries return
correctly. That's undesirable and will also be fixed later on, but for
now let's make the test actually work.
Author: Craig Ringer
A thinko concerning nesting depth caused json_to_record() to produce bogus
output if a field of its input object contained a sub-object with a field
name matching one of the requested output column names. Per bug #13996
from Johann Visagie.
I added a regression test case based on his example, plus parallel tests
for json_to_recordset, jsonb_to_record, jsonb_to_recordset. The latter
three do not exhibit the same bug (which suggests that we may be missing
some opportunities to share code...) but testing seems like a good idea
in any case.
Back-patch to 9.4 where these functions were introduced.
This makes it easier to relate the temporary data dirs to each node in
a test script.
Author: Kyotaro Horiguchi
Reviewed-By: Craig Ringer, Alvaro Herrera
Commit 7132810c (Retain tempdirs for failed tests) used Test::More's
is_passing method, but that was added in Test::More 0.89_01 which is
sometime later than Perl 5.10.1. Popular platforms such as RHEL6 don't
have that, nevermind some of our older dinosaurs. Do it the hard way.
Michael Paquier, based on research by Craig Ringer
These tests verify that 1) WAL replay preserves the stored value,
2) a streaming standby server replays the value obtained from the
master, and 3) the behavior is sensible in the face of repeated
configuration changes.
One annoyance is that tmp_check/ subdir from the TAP tests is clobbered
when the pg_regress test runs in the same subdirectory. This is
bothersome but not too terrible a problem, since the pg_regress test is
not run anyway if the TAP tests fail (unless "make -k" is used).
I had these tests around since commit 69e7235c93e2; add them now that we
have the recovery test framework in place.
I noticed that the async-notify test results in log messages like these:
LOG: could not send data to client: Broken pipe
FATAL: connection to client lost
This is because it unceremoniously disconnects a client session that is
about to have some NOTIFY messages delivered to it. Such log messages
during a regression test might well cause people to go looking for a
problem that doesn't really exist (it did cause me to waste some time that
way). We can shut it up by adding an UNLISTEN command to session teardown.
Patch HEAD only; this doesn't seem significant enough to back-patch.
The original coding of the test was relying too much on the ordering in
which backends are awakened once an advisory lock which they wait for is
released. Change the code so that each backend uses its own advisory
lock instead, so that the output becomes stable. Also add a few seconds
of sleep between lock releases, so that the test isn't broken in
overloaded buildfarm animals, as suggested by Tom Lane.
Per buildfarm members spoonbill and guaibasaurus.
Discussion: https://www.postgresql.org/message-id/19294.1456551587%40sss.pgh.pa.us
When converting an RTE with securityQuals into a security barrier
subquery RTE, ensure that the Vars in the new subquery's targetlist
all have varlevelsup = 0 so that they correctly refer to the
underlying base relation being wrapped.
The original code was creating new Vars by copying them from existing
Vars referencing the base relation found elsewhere in the query, but
failed to account for the fact that such Vars could come from sublink
subqueries, and hence have varlevelsup > 0. In practice it looks like
this could only happen with nested security barrier views, where the
outer view has a WHERE clause containing a correlated subquery, due to
the order in which the Vars are processed.
Bug: #13988
Reported-by: Adam Guthrie
Backpatch-to: 9.4, where updatable SB views were introduced
In 0e5680f473, I fixed a bug in heapam that caused spurious deadlocks
when multiple updates concurrently attempted to modify the old version
of an updated tuple whose new version was key-share locked. I proposed
an isolationtester spec file that reproduced the bug, but back then
isolationtester wasn't mature enough to be able to run it. Now that
38f8bdcac4 is in the tree, we can have this spec file too.
Discussion: https://www.postgresql.org/message-id/20141212205254.GC1768%40alvh.no-ip.org
I applied the previous-to-last revision of Michaël's submitted patch
instead of the last; these two tweaks pointed out by Craig were left out
of the previous commit by accident.
Some code in the RewindTest test suite is more generally useful than
just for that suite, so put it where other test suites can reach it.
Some postgresql.conf parameters change their default values when a
cluster is initialized with 'allows_streaming' than the previous
behavior; most notably, autovacuum is no longer turned off.
(Also, we no longer call pg_ctl promote with -w, but that flag doesn't
actually do anything in promote so there's no behavior change.)
Author: Michael Paquier
Also, the dump_info method got split into another method that returns
the stuff as a string instead of just printing it to stdout.
Add a new README in src/test/perl too.
Author: Craig Ringer
Reviewed by: Michaël Paquier
This patch introduces "pg_blocking_pids(int) returns int[]", which returns
the PIDs of any sessions that are blocking the session with the given PID.
Historically people have obtained such information using a self-join on
the pg_locks view, but it's unreasonably tedious to do it that way with any
modicum of correctness, and the addition of parallel queries has pretty
much broken that approach altogether. (Given some more columns in the view
than there are today, you could imagine handling parallel-query cases with
a 4-way join; but ugh.)
The new function has the following behaviors that are painful or impossible
to get right via pg_locks:
1. Correctly understands which lock modes block which other ones.
2. In soft-block situations (two processes both waiting for conflicting lock
modes), only the one that's in front in the wait queue is reported to
block the other.
3. In parallel-query cases, reports all sessions blocking any member of
the given PID's lock group, and reports a session by naming its leader
process's PID, which will be the pg_backend_pid() value visible to
clients.
The motivation for doing this right now is mostly to fix the isolation
tests. Commit 38f8bdcac4 lobotomized
isolationtester's is-it-waiting query by removing its ability to recognize
nonconflicting lock modes, as a crude workaround for the inability to
handle soft-block situations properly. But even without the lock mode
tests, the old query was excessively slow, particularly in
CLOBBER_CACHE_ALWAYS builds; some of our buildfarm animals fail the new
deadlock-hard test because the deadlock timeout elapses before they can
probe the waiting status of all eight sessions. Replacing the pg_locks
self-join with use of pg_blocking_pids() is not only much more correct, but
a lot faster: I measure it at about 9X faster in a typical dev build with
Asserts, and 3X faster in CLOBBER_CACHE_ALWAYS builds. That should provide
enough headroom for the slower CLOBBER_CACHE_ALWAYS animals to pass the
test, without having to lengthen deadlock_timeout yet more and thus slow
down the test for everyone else.
Some over-eager copy-and-pasting on my part resulted in a nonsense
result being returned in this case. I have adopted the same pattern for
handling this case as is used in the one argument form of the function,
i.e. we just skip over the code that adds values to the object.
Diagnosis and patch from Michael Paquier, although not quite his
solution.
Fixes bug #13936.
Backpatch to 9.5 where jsonb_object was introduced.
This will parse strings in the format produced by pg_size_pretty() and
return sizes in bytes. This allows queries to be written with clauses
like "pg_total_relation_size(oid) > pg_size_bytes('10 GB')".
Author: Pavel Stehule with various improvements by Vitaly Burovoy
Discussion: http://www.postgresql.org/message-id/CAFj8pRD-tGoDKnxdYgECzA4On01_uRqPrwF-8LdkSE-6bDHp0w@mail.gmail.com
Reviewed-by: Vitaly Burovoy, Oleksandr Shulgin, Kyotaro Horiguchi,
Michael Paquier and Robert Haas
Up to now, there's been an assumption that all Paths for a given relation
compute the same output column set (targetlist). However, there are good
reasons to remove that assumption. For example, an indexscan on an
expression index might be able to return the value of an expensive function
"for free". While we have the ability to generate such a plan today in
simple cases, we don't have a way to model that it's cheaper than a plan
that computes the function from scratch, nor a way to create such a plan
in join cases (where the function computation would normally happen at
the topmost join node). Also, we need this so that we can have Paths
representing post-scan/join steps, where the targetlist may well change
from one step to the next. Therefore, invent a "struct PathTarget"
representing the columns we expect a plan step to emit. It's convenient
to include the output tuple width and tlist evaluation cost in this struct,
and there will likely be additional fields in future.
While Path nodes that actually do have custom outputs will need their own
PathTargets, it will still be true that most Paths for a given relation
will compute the same tlist. To reduce the overhead added by this patch,
keep a "default PathTarget" in RelOptInfo, and allow Paths that compute
that column set to just point to their parent RelOptInfo's reltarget.
(In the patch as committed, actually every Path is like that, since we
do not yet have any cases of custom PathTargets.)
I took this opportunity to provide some more-honest costing of
PlaceHolderVar evaluation. Up to now, the assumption that "scan/join
reltargetlists have cost zero" was applied not only to Vars, where it's
reasonable, but also PlaceHolderVars where it isn't. Now, we add the eval
cost of a PlaceHolderVar's expression to the first plan level where it can
be computed, by including it in the PathTarget cost field and adding that
to the cost estimates for Paths. This isn't perfect yet but it's much
better than before, and there is a way forward to improve it more. This
costing change affects the join order chosen for a couple of the regression
tests, changing expected row ordering.
Move and refactor the underlying code for the pg_config client
application to src/common in support of sharing it with a new
system information SRF called pg_config() which makes the same
information available via SQL. Additionally wrap the SRF with a
new system view, as called pg_config.
Patch by me with extensive input and review by Michael Paquier
and additional review by Alvaro Herrera.
The previous value of 5s is inadequate for the buildfarm's
CLOBBER_CACHE_ALWAYS animals: they take long enough to do the is-it-waiting
queries that the timeout expires, allowing the database state to change,
before isolationtester is done looking. Perhaps 10s will be enough.
(If it isn't, I'm inclined to reduce the number of sessions involved.)
This mostly reverts commit 9c9782f066.
I left in the parts that rearranged removal of completed waiting steps;
but the idea of not rechecking a step's blocked-ness isn't working.
It turns out that there is a second race condition in the new deadlock-hard
test: once the deadlock detector fires, it's uncertain whether step s7a8 or
step s8a1 will report first, because killing s8's transaction unblocks s7.
So far, s7 has only been seen to report first in CLOBBER_CACHE_ALWAYS
builds, but it's pretty reproducible there, and in theory it should
sometimes occur in normal builds too. If s7 were a bit slower than usual,
that could also break the test, since the existing expected-file assumes
that we'll see s7a8 report the first time we check it after s8a1 completes.
To fix, add a post-lock delay to s7a8.
If we're retrying a step, then we already decided it was blocked on a lock,
and there's no need to recheck that. The original coding of commit
38f8bdcac4 resulted in a large number of
is-it-waiting queries when dealing with multiple concurrently-blocked
sessions, which is fairly pointless and also results in test failures in
CLOBBER_CACHE_ALWAYS builds, where the is-it-waiting query is quite slow.
This definition also permits appending pg_sleep() calls to steps where it's
needed to control the order of finish of concurrent steps. Before, that
did not work nicely because we'd decide that a step performing a sleep was
not blocked and hang up waiting for it to finish, rather than noticing the
completion of the concurrent step we're supposed to notice first.
In passing, revise handling of removal of completed waiting steps
to make it a bit less messy.
The new deadlock-soft-2 test has a timing dependency too: it supposes
that isolationtester will detect step s1b as waiting before the deadlock
detector runs and grants it the lock. Adjust deadlock_timeout to ensure
that that's true even in CLOBBER_CACHE_ALWAYS builds, where the wait
detection query is quite slow. Per buildfarm member jaguarundi.
If a GROUP BY clause includes all columns of a non-deferred primary key,
as well as other columns of the same relation, those other columns are
redundant and can be dropped from the grouping; the pkey is enough to
ensure that each row of the table corresponds to a separate group.
Getting rid of the excess columns will reduce the cost of the sorting or
hashing needed to implement GROUP BY, and can indeed remove the need for
a sort step altogether.
This seems worth testing for since many query authors are not aware of
the GROUP-BY-primary-key exception to the rule about queries not being
allowed to reference non-grouped-by columns in their targetlists or
HAVING clauses. Thus, redundant GROUP BY items are not uncommon. Also,
we can make the test pretty cheap in most queries where it won't help
by not looking up a rel's primary key until we've found that at least
two of its columns are in GROUP BY.
David Rowley, reviewed by Julien Rouhaud
The original formulation of 4c9864b9b4
was extremely timing-sensitive, because it arranged for the deadlock
detector to be running (and possibly unblocking the current query)
at almost exactly the same time as isolationtester would be probing
to see if the query is blocked. The committed expected-file assumed
that the deadlock detection would finish first, but we see the opposite
on both fast and slow buildfarm animals. Adjust the deadlock timeout
settings to make it predictable that isolationtester *will* see the
query as waiting before deadlock detection unblocks it.
I used a 5s timeout for the same reasons mentioned in
a7921f71a3.
Fix a few oversights in 38f8bdcac4982215beb9f65a19debecaf22fd470:
don't leak memory in run_permutation(), remember when we've issued
a cancel rather than issuing another one every 10ms,
fix some typos in comments.
This allows testing of deadlock scenarios. Scenarios that would
previously have been considered invalid are now simply taken as a
scenario in which more than one backend will wait.
This is a necessary prerequisite for forthcoming changes to allow deadlock
scenarios to be tested by the isolation tester. It is also a good idea on
general principle, since these scenarios add no useful test coverage not
provided by other scenarios, but do to take time to execute.
Tom Lane
Peter Eisentraut
Heikki Linnakangas
Andres Freund
Alvaro Herrera
Simon Riggs
Robert Haas
Noah Misch
Stephen Frost
Fujii Masao
Teodor Sigaev
Greg Stark
Dean Rasheed
Kevin Grittner
Andrew Dunstan
Joe Conway