Before, we always used a dummy value of 1, but that's not right when
the partitioned table being modified is inside of a WITH clause
rather than part of the main query.
Amit Langote, reported and reviewd by Etsuro Fujita, with a comment
change by me.
Discussion: http://postgr.es/m/ee12f648-8907-77b5-afc0-2980bcb0aa37@lab.ntt.co.jp
It seems pretty confusing to have tests named both largeobject and
large_object. The latter is of very recent vintage (commit ff992c074),
so get rid of it in favor of merging into the former.
Also, enable the LO comment test that was added by commit 70ad7ed4e,
since the later commit added the then-missing pg_upgrade functionality.
The large_object.sql test case is almost completely redundant with that,
but not quite: it seems like creating a user-defined LO with an OID in
the system range might be an interesting case for pg_upgrade, so let's
keep it.
Like the earlier patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/18665.1500306372@sss.pgh.pa.us
One, logging for CREATE INDEX was oblivious to the fact that when
an unlogged table is created, *only* operations on the init fork
should be logged.
Two, init fork buffers need to be flushed after they are written;
otherwise, a filesystem-level copy following recovery may do the
wrong thing. (There may be a better fix for this issue than the
one used here, but this is transposed from the similar logic already
present in XLogReadBufferForRedoExtended, and a broader refactoring
after beta2 seems inadvisable.)
Amit Kapila, reviewed by Ashutosh Sharma, Kyotaro Horiguchi,
and Michael Paquier
Discussion: http://postgr.es/m/CAA4eK1JpcMsEtOL_J7WODumeEfyrPi7FPYHeVdS7fyyrCrgp4w@mail.gmail.com
Doing so was useful in 273c458a2b but
became obsolete when 818fd4a67d caused
postgres.exe to provide the relevant symbols. No other loadable module
links to libpgcommon directly.
Given this code's general eagerness to use subexpressions' output variables
as temporary workspace, it's not exactly clear that it is safe for
FieldStore to tell a newval subexpression that it can write into the same
variable that is being supplied as a potential input. Document the chain
of assumptions needed for that to be safe.
I got confused about why this function doesn't need to recursively
search the expression tree for a CaseTestExpr node. After figuring
that out, add a comment to save the next person some time.
Add missing infrastructure for this node type, notably in ruleutils.c where
its lack could demonstrably cause EXPLAIN to fail. Add outfuncs/readfuncs
support. (outfuncs support is useful today for debugging purposes. The
readfuncs support may never be needed, since at present it would only
matter for parallel query and NextValueExpr should never appear in a
parallelizable query; but it seems like a bad idea to have a primnode type
that isn't fully supported here.) Teach planner infrastructure that
NextValueExpr is a volatile, parallel-unsafe, non-leaky expression node
with cost cpu_operator_cost. Given its limited scope of usage, there
*might* be no live bug today from the lack of that knowledge, but it's
certainly going to bite us on the rear someday. Teach pg_stat_statements
about the new node type, too.
While at it, also teach cost_qual_eval() that MinMaxExpr, SQLValueFunction,
XmlExpr, and CoerceToDomain should be charged as cpu_operator_cost.
Failing to do this for SQLValueFunction was an oversight in my commit
0bb51aa96. The others are longer-standing oversights, but no time like the
present to fix them. (In principle, CoerceToDomain could have cost much
higher than this, but it doesn't presently seem worth trying to examine the
domain's constraints here.)
Modify execExprInterp.c to execute NextValueExpr as an out-of-line
function; it seems quite unlikely to me that it's worth insisting that
it be inlined in all expression eval methods. Besides, providing the
out-of-line function doesn't stop anyone from inlining if they want to.
Adjust some places where NextValueExpr support had been inserted with the
aid of a dartboard rather than keeping it in the same order as elsewhere.
Discussion: https://postgr.es/m/23862.1499981661@sss.pgh.pa.us
In the frontend Makefiles that pull in libpgfeutils, we'd generally
done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport)
That method is badly broken, as seen in bug #14742 from Chris Ruprecht.
The -L flag for src/fe_utils ends up being placed after whatever random
-L flags are in LDFLAGS already. That puts us at risk of pulling in
libpgfeutils.a from some previous installation rather than the freshly
built one in src/fe_utils. Also, the lack of an "override" is hazardous
if someone tries to specify some LDFLAGS on the make command line.
The correct way to do it is like this:
override LDFLAGS := -L$(top_builddir)/src/fe_utils -lpgfeutils $(libpq_pgport) $(LDFLAGS)
so that libpgfeutils, along with libpq, libpgport, and libpgcommon, are
guaranteed to be pulled in from the build tree and not from any referenced
system directory, because their -L flags will appear first.
In some places we'd been even lazier and done it like this:
LDFLAGS += -L$(top_builddir)/src/fe_utils -lpgfeutils -lpq
which is subtly wrong in an additional way: on platforms where we can't
restrict the symbols exported by libpq.so, it allows libpgfeutils to
latch onto libpgport and libpgcommon symbols from libpq.so, rather than
directly from those static libraries as intended. This carries hazards
like those explained in the comments for the libpq_pgport macro.
In addition to fixing the broken libpgfeutils usages, I tried to
standardize on using $(libpq_pgport) like so:
override LDFLAGS := $(libpq_pgport) $(LDFLAGS)
even where libpgfeutils is not in the picture. This makes no difference
right now but will hopefully discourage future mistakes of the same ilk.
And it's more like the way we handle CPPFLAGS in libpq-using Makefiles.
In passing, just for consistency, make pgbench include PTHREAD_LIBS the
same way everyplace else does, ie just after LIBS rather than in some
random place in the command line. This might have practical effect if
there are -L switches in that macro on some platform.
It looks to me like the MSVC build scripts are not affected by this
error, but someone more familiar with them than I might want to double
check.
Back-patch to 9.6 where libpgfeutils was introduced. In 9.6, the hazard
this error creates is that a reinstallation might link to the prior
installation's copy of libpgfeutils.a and thereby fail to absorb a
minor-version bug fix.
Discussion: https://postgr.es/m/20170714125106.9231.13772@wrigleys.postgresql.org
When writing a backup to stdout with pg_basebackup on Windows, put stdout
to binary mode. Any CR bytes in the output will otherwise be output
incorrectly as CR+LF.
In the passing, standardize on using "_setmode" instead of "setmode", for
the sake of consistency. They both do the same thing, but according to
MSDN documentation, setmode is deprecated.
Fixes bug #14634, reported by Henry Boehlert. Patch by Haribabu Kommi.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/20170428082818.24366.13134@wrigleys.postgresql.org
The grammar will only accept something syntactically similar to a function
call in a function-in-FROM expression. However, there are various ways
to input something that ruleutils.c won't deparse that way, potentially
leading to a view or rule that fails dump/reload. Fix by inserting a
dummy CAST around anything that isn't going to deparse as a function
(which is one of the ways to get something like that in there in the
first place).
In HEAD, also make use of the infrastructure added by this to avoid
emitting unnecessary parentheses in CREATE INDEX deparsing. I did
not change that in back branches, thinking that people might find it
to be unexpected/unnecessary behavioral change.
In HEAD, also fix incorrect logic for when to add extra parens to
partition key expressions. Somebody apparently thought they could
get away with simpler logic than pg_get_indexdef_worker has, but
they were wrong --- a counterexample is PARTITION BY LIST ((a[1])).
Ignoring the prettyprint flag for partition expressions isn't exactly
a nice solution anyway.
This has been broken all along, so back-patch to all supported branches.
Discussion: https://postgr.es/m/10477.1499970459@sss.pgh.pa.us
The race condition goes like this:
1. GetNewTransactionId advances nextXid e.g. from 100 to 101
2. GetOldestActiveTransactionId reads the new nextXid, 101
3. GetOldestActiveTransactionId loops through the proc array. There are no
active XIDs there, so it returns 101 as the oldest active XID.
4. GetNewTransactionid stores XID 100 to MyPgXact->xid
So, GetOldestActiveTransactionId returned XID 101, even though 100 only
just started and is surely still running.
This would be hard to hit in practice, and even harder to spot any ill
effect if it happens. GetOldestActiveTransactionId is only used when
creating a checkpoint in a master server, and the race condition can only
happen on an online checkpoint, as there are no backends running during a
shutdown checkpoint. The oldestActiveXid value of an online checkpoint is
only used when starting up a hot standby server, to determine the starting
point where pg_subtrans is initialized from. For the race condition to
happen, there must be no other XIDs in the proc array that would hold back
the oldest-active XID value, which means that the missed XID must be a top
transaction's XID. However, pg_subtrans is not used for top XIDs, so I
believe an off-by-one error is in fact inconsequential. Nevertheless, let's
fix it, as it's clearly wrong and the fix is simple.
This has been wrong ever since hot standby was introduced, so backport to
all supported versions.
Discussion: https://www.postgresql.org/message-id/e7258662-82b6-7a45-56d4-99b337a32bf7@iki.fi
Further investigation shows that ruleutils isn't quite up to speed either
for cases where we have a domain-over-array: it needs to be prepared to
look past a CoerceToDomain at the top level of field and element
assignments, else it decompiles them incorrectly. Potentially this would
result in failure to dump/reload a rule, if it looked like the one in the
new test case. (I also added a test for EXPLAIN; that output isn't broken,
but clearly we need more test coverage here.)
Like commit b1cb32fb6, this bug is reachable in cases we already support,
so back-patch all the way.
compute_tsvector_stats() detoasted and kept in memory every tsvector value
in the sample, but that can be a lot of memory. The original bug report
described a case using over 10 gigabytes, with statistics target of 10000
(the maximum).
To fix, allocate a separate copy of just the lexemes that we keep around,
and free the detoasted tsvector values as we go. This adds some palloc/pfree
overhead, when you have a lot of distinct lexemes in the sample, but it's
better than running out of memory.
Fixes bug #14654 reported by James C. Reviewed by Tom Lane. Backport to
all supported versions.
Discussion: https://www.postgresql.org/message-id/20170514200602.1451.46797@wrigleys.postgresql.org
If the number of tuples in the heap exceeds approximately INT_MAX/2,
this loop's calculation "2*i+1" could overflow, resulting in a crash.
Fix it by using unsigned int rather than int for the relevant local
variables; that shouldn't cost anything extra on any popular hardware.
Per bug #14722 from Sergey Koposov.
Original patch by Sergey Koposov, modified by me per a suggestion
from Heikki Linnakangas to use unsigned int not int64.
Back-patch to 9.4, where tuplesort.c grew the ability to sort as many
as INT_MAX tuples in-memory (commit 263865a48).
Discussion: https://postgr.es/m/20170629161637.1478.93109@wrigleys.postgresql.org
Commit 14e8803f1 removed the locking in SyncRepWaitForLSN, but that
introduced a race condition, where SyncRepWaitForLSN might see
syncRepState already set to SYNC_REP_WAIT_COMPLETE, but the process was
not yet removed from the queue. That tripped the assertion, that the
process should no longer be in the uqeue. Reorder the operations in
SyncRepWakeQueue to remove the process from the queue first, and update
syncRepState only after that, and add a memory barrier in between to make
sure the operations are made visible to other processes in that order.
Fixes bug #14721 reported by Const Zhang. Analysis and fix by Thomas Munro.
Backpatch down to 9.5, where the locking was removed.
Discussion: https://www.postgresql.org/message-id/20170629023623.1480.26508%40wrigleys.postgresql.org
We allow INSERT and UPDATE commands to assign to the same column more than
once, as long as the assignments are to subfields or elements rather than
the whole column. However, this failed when the target column was a domain
over array rather than plain array. Fix by teaching process_matched_tle()
to look through CoerceToDomain nodes, and add relevant test cases.
Also add a group of test cases exercising domains over array of composite.
It's doubtless accidental that CREATE DOMAIN allows this case while not
allowing straight domain over composite; but it does, so we'd better make
sure we don't break it. (I could not find any documentation mentioning
either side of that, so no doc changes.)
It's been like this for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/4206.1499798337@sss.pgh.pa.us
We've heard occasional reports of backend launch failing because
pgwin32_ReserveSharedMemoryRegion() fails, indicating that something
has already used that address space in the child process. It's not
very clear what, given that we disable ASLR in Windows builds, but
suspicion falls on antivirus products. It'd be better if we didn't
have to disable ASLR, anyway. So let's try to ameliorate the problem
by retrying the process launch after such a failure, up to 100 times.
Patch by me, based on previous work by Amit Kapila and others.
This is a longstanding issue, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAA4eK1+R6hSx6t_yvwtx+NRzneVp+MRqXAdGJZChcau8Uij-8g@mail.gmail.com
Commit c46c0e5202 failed to pass the
TransitionCaptureState object to ExecARInsertTriggers() in the case
where it's using heap_multi_insert and there are indexes. Repair.
Thomas Munro, from a report by David Fetter
Discussion: https://postgr.es/m/20170708084213.GA14720%40fetter.org
Also fix two other issues, while we're at it:
* In error message on connection failure, if multiple network addresses
were given as the host option, as in "host=127.0.0.1,127.0.0.2", the
error message printed the address twice.
* If there were many more ports than hostnames, the error message would
always claim that there was one port too many, even if there was more than
one. For example, if you gave 2 hostnames and 5 ports, the error message
claimed that you gave 2 hostnames and 3 ports.
Discussion: https://www.postgresql.org/message-id/10badbc6-4d5a-a769-623a-f7ada43e14dd@iki.fi
On platforms lacking both locale_t and ICU, collationcmds.c failed
to make any use of its static function is_all_ascii(), thus probably
drawing a compiler warning. Oversight in my commit ddb5fdc06.
Per buildfarm member gaur.
partition_rbound_cmp() is intended to compare range partition bounds
in a way such that if all the bound values are equal but one is an
upper bound and one is a lower bound, the upper bound is treated as
smaller than the lower bound. This particular ordering is required by
RelationBuildPartitionDesc() when building the PartitionBoundInfoData,
so that it can consistently keep only the upper bounds when upper and
lower bounds coincide.
Update the function comment to make that clearer.
Also, fix a (currently unreachable) corner-case bug -- if the bound
values coincide and they contain unbounded values, fall through to the
lower-vs-upper comparison code, rather than immediately returning
0. Currently it is not possible to define coincident upper and lower
bounds containing unbounded columns, but that may change in the
future, so code defensively.
Discussion: https://postgr.es/m/CAAJ_b947mowpLdxL3jo3YLKngRjrq9+Ej4ymduQTfYR+8=YAYQ@mail.gmail.com
The previous logic, whilst not actually wrong, was overly complex and
involved doing two binary searches, where only one was really
necessary. This simplifies that logic and improves the comments.
One visible change is that if the new partition overlaps multiple
existing partitions, the error message now always reports the overlap
with the first existing partition (the one with the lowest
bounds). The old code would sometimes report the clash with the first
partition and sometimes with the last one.
Original patch idea from Amit Langote, substantially rewritten by me.
Discussion: https://postgr.es/m/CAAJ_b947mowpLdxL3jo3YLKngRjrq9+Ej4ymduQTfYR+8=YAYQ@mail.gmail.com
Buildfarm members hornet and sungazer have shown multiple instances of
"Failed test 'xmin of non-cascaded slot with hs feedback has changed'".
The reason seems to be that the test is checking the current xmin of the
master server's replication slot against a past xmin of the first slave
server's replication slot. Even though the latter slot is downstream of
the former, it's possible for its reported xmin to be ahead of the former's
reported xmin, because those numbers are updated whenever the respective
downstream walreceiver feels like it (see logic in WalReceiverMain).
Instrumenting this test shows that indeed the slave slot's xmin does often
advance before the master's does, especially if an autovacuum transaction
manages to occur during the relevant window. If we happen to capture such
an advanced xmin as $xmin, then the subsequent wait_slot_xmins call can
fall through before the master's xmin has advanced at all, and then if it
advances before the get_slot_xmins call, we can get the observed failure.
Yeah, that's a bit of a long chain of deduction, but it's hard to explain
any other way how the test can get past an "xmin <> '$xmin'" check only
to have the next query find that xmin does equal $xmin.
Fix by keeping separate images of the master and slave slots' xmins
and testing their has-xmin-advanced conditions independently.
If an operation being waited for does not complete within the timeout,
then exit with a nonzero exit status. This was previously handled
inconsistently.
WRITE_CHAR_FIELD() didn't do any escaping, so that for example a zero
byte would cause the whole output string to be truncated. To fix, pass
the char through outToken(), so it is escaped like a string. Adjust the
reading side to handle this.
Update the documentation for \pset to mention
columns|linestyle|pager_min_lines. Add various mentions of \pset
command equivalences that were previously inconsistent.
Author: Дилян Палаузов <dpa-postgres@aegee.org>
This avoids "tuple concurrently updated" errors when a ALTER or DROP
SUBSCRIPTION writes to pg_subscription_rel at the same time as a worker.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Since reducing pg_ctl's reaction time in commit c61559ec3, some
slower buildfarm members have shown erratic failures in this test.
The reason turns out to be that the test assumes synchronous
replication (because it does not provide any lag time for a commit
to replicate before shutting down the servers), but it had only
enabled sync rep in one direction. The observed symptoms correspond
to failure to replicate the last committed transaction in the other
direction, which can be expected to happen if the shutdown command
is issued soon enough and we are providing no synchronous-commit
guarantees.
Fix that, and add a bit more paranoid state checking at the bottom
of the script.
Michael Paquier and myself
Discussion: https://postgr.es/m/908.1498965681@sss.pgh.pa.us
By default, Perl's split() function drops trailing empty fields,
which is not what we want here. Oversight in commit fb093e4cb.
We'd managed to miss it thus far thanks to the very limited usage
of this function.
Discussion: https://postgr.es/m/14837.1499029831@sss.pgh.pa.us
The original coding here was very confusing, because it named the
two servers it set up "master" and "slave" even though it swapped
their replication roles multiple times. At any given point in the
script it was very unobvious whether "$node_master" actually referred
to the server named "master" or the other one. Instead, pick arbitrary
names for the two servers --- I used "london" and "paris" --- and
distinguish those permanent names from the nonce references $cur_master
and $cur_slave. Add logging to help distinguish which is which at
any given point. Also, use distinct data and transaction names to
make all the prepared transactions easily distinguishable in the
postmaster logs. (There was one place where we intentionally tested
that the server could cope with re-use of a transaction name, but
it seems like one place is sufficient for that purpose.)
Also, add checks at the end to make sure that all the transactions
that were supposed to be committed did survive.
Discussion: https://postgr.es/m/28238.1499010855@sss.pgh.pa.us
Add an optional "expected" argument to override the default assumption
that we're waiting for the query to return "t". This allows replacing
a handwritten polling loop in recovery/t/007_sync_rep.pl with use of
poll_query_until(); AFAICS that's the only remaining ad-hoc polling
loop in our TAP tests.
Change poll_query_until() to probe ten times per second not once per
second. Like some similar changes I've been making recently, the
one-second interval seems to be rooted in ancient traditions rather
than the actual likely wait duration on modern machines. I'd consider
reducing it further if there were a convenient way to spawn just one
psql for the whole loop rather than one per probe attempt.
Discussion: https://postgr.es/m/12486.1498938782@sss.pgh.pa.us
The simple calculations done to estimate the size of the output buffers
for ucnv_fromUChars() and ucnv_toUChars() could overflow int32_t for
large strings. To avoid that, go the long way and run the function
first without an output buffer to get the correct output buffer size
requirement.
Several callers of PostgresNode::poll_query_until() neglected to check
for failure; I do not think that's optional. Also, rewrite one place
that had reinvented poll_query_until() for no very good reason.
The regression tests contain numerous cases where we do some activity on a
master server and then wait till the slave has ack'd flushing its copy of
that transaction. Because WAL flush on the slave is asynchronous to the
logicalrep worker process, the worker cannot send such a feedback message
during the LogicalRepApplyLoop iteration where it processes the last data
from the master. In the previous coding, the feedback message would come
out only when the loop's WaitLatchOrSocket call returned WL_TIMEOUT. That
requires one full second of delay (NAPTIME_PER_CYCLE); and to add insult
to injury, it could take more than that if the WaitLatchOrSocket was
interrupted a few times by latch-setting events.
In reality we can expect the slave's walwriter process to have flushed the
WAL data after, more or less, WalWriterDelay (typically 200ms). Hence,
if there are unacked transactions pending, make the wait delay only that
long rather than the full NAPTIME_PER_CYCLE. Also, move one of the
send_feedback() calls into the loop main line, so that we'll check for the
need to send feedback even if we were woken by a latch event and not either
socket data or timeout.
It's not clear how much this matters for production purposes, but
it's definitely helpful for testing.
Discussion: https://postgr.es/m/30864.1498861103@sss.pgh.pa.us
When waiting for a logical replication worker process to start or stop,
we have to busy-wait until we see it add or remove itself from the
LogicalRepWorker slot in shared memory. Those loops were using a
one-second delay between checks, but on any reasonably modern machine, it
doesn't take more than a couple of msec for a worker to spawn or shut down.
Reduce the loop delays to 10ms to avoid wasting quite so much time in the
related regression tests.
In principle, a better solution would be to fix things so that the waiting
process can be awakened via its latch at the right time. But that seems
considerably more invasive, which is undesirable for a post-beta fix.
Worker start/stop performance likely isn't of huge interest anyway for
production purposes, so we might not ever get around to it.
In passing, rearrange the second wait loop in logicalrep_worker_stop()
so that the lock is held at the top of the loop, thus saving one lock
acquisition/release per call, and making it look more like the other loop.
Discussion: https://postgr.es/m/30864.1498861103@sss.pgh.pa.us
The bug would previously prevent the update of any column in a table
with identity columns, rather than just the actual identity column.
Reported-by: zam6ak@gmail.com
Bug: #14718
In WAL receiver and WAL server, some accesses to their corresponding
shared memory control structs were done without holding any kind of
lock, which could lead to inconsistent and possibly insecure results.
In walsender, fix by clarifying the locking rules and following them
correctly, as documented in the new comment in walsender_private.h;
namely that some members can be read in walsender itself without a lock,
because the only writes occur in the same process. The rest of the
struct requires spinlock for accesses, as usual.
In walreceiver, fix by always holding spinlock while accessing the
struct.
While there is potentially a problem in all branches, it is minor in
stable ones. This only became a real problem in pg10 because of quorum
commit in synchronous replication (commit 3901fd70cc), and a potential
security problem in walreceiver because a superuser() check was removed
by default monitoring roles (commit 25fff40798). Thus, no backpatch.
In passing, clean up some leftover braces which were used to create
unconditional blocks. Once upon a time these were used for
volatile-izing accesses to those shmem structs, which is no longer
required. Many other occurrences of this pattern remain.
Author: Michaël Paquier
Reported-by: Michaël Paquier
Reviewed-by: Masahiko Sawada, Kyotaro Horiguchi, Thomas Munro,
Robert Haas
Discussion: https://postgr.es/m/CAB7nPqTWYqtzD=LN_oDaf9r-hAjUEPAy0B9yRkhcsLdRN8fzrw@mail.gmail.com
('foo') is not a Python tuple: it is a string wrapped in parentheses. A
valid 1-element Python tuple is ('foo',).
Author: Daniele Varrazzo <daniele.varrazzo@gmail.com>
When a sync worker is waiting for the associated apply worker to notice
that it's in SYNCWAIT state, wait_for_worker_state_change() would just
patiently wait for that to happen. This generally required waiting for
the 1-second timeout in LogicalRepApplyLoop to elapse. Kicking the worker
via its latch makes things significantly snappier.
While at it, fix race conditions that could potentially result in crashes:
we can *not* call logicalrep_worker_wakeup_ptr() once we've released the
LogicalRepWorkerLock, because worker->proc might've been reset to NULL
after we do that (indeed, there's no really solid reason to believe that
the LogicalRepWorker slot even belongs to the same worker anymore).
In logicalrep_worker_wakeup(), we can just move the wakeup inside the
lock scope. In process_syncing_tables_for_apply(), a bit more code
rearrangement is needed.
Also improve some nearby comments.
It's possible for WalSndWaitForWal to be asked to wait for WAL that doesn't
exist yet. That's fine, in fact it's the normal situation if we're caught
up; but when the client requests shutdown we should not keep waiting.
The previous coding could wait indefinitely if the source server was idle.
In passing, improve the rather weak comments in this area, and slightly
rearrange some related code for better readability.
Back-patch to 9.4 where this code was introduced.
Discussion: https://postgr.es/m/14154.1498781234@sss.pgh.pa.us
ICU does not support "collate" and "ctype" being different, so the
collctype catalog column is ignored. But for catalog neatness, ensure
that they are the same.
This command used to compute the collencoding entry like when a
completely new collation is created. But for example when copying the
"C" collation, this would then result in a collation that has a
collencoding entry for the current database encoding rather than -1,
thus not making an exact copy. This has probably no practical impact,
but making this change keeps the catalog contents neat.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
The point of this loop is to insert 1000 rows into the test table
and consume 1000 XIDs. I can't see any good reason why it's useful
to launch 1000 psqls and 1000 backend processes to accomplish that.
Pushing the looping into a plpgsql DO block shaves about 10 seconds
off the runtime of the src/test/recovery TAP tests on my machine;
that's over 10% of the runtime of that test suite.
It is, in fact, sufficiently more efficient that we now demonstrably
need wait_slot_xmins() afterwards, or the slaves' xmins may not have
moved yet.
Traditionally, "pg_ctl start -w" has waited for the server to become
ready to accept connections by attempting a connection once per second.
That has the major problem that connection issues (for instance, a
kernel packet filter blocking traffic) can't be reliably told apart
from server startup issues, and the minor problem that if server startup
isn't quick, we accumulate "the database system is starting up" spam
in the server log. We've hacked around many of the possible connection
issues, but it resulted in ugly and complicated code in pg_ctl.c.
In commit c61559ec3, I changed the probe rate to every tenth of a second.
That prompted Jeff Janes to complain that the log-spam problem had become
much worse. In the ensuing discussion, Andres Freund pointed out that
we could dispense with connection attempts altogether if the postmaster
were changed to report its status in postmaster.pid, which "pg_ctl start"
already relies on being able to read. This patch implements that, teaching
postmaster.c to report a status string into the pidfile at the same
state-change points already identified as being of interest for systemd
status reporting (cf commit 7d17e683f). pg_ctl no longer needs to link
with libpq at all; all its functions now depend on reading server files.
In support of this, teach AddToDataDirLockFile() to allow addition of
postmaster.pid lines in not-necessarily-sequential order. This is needed
on Windows where the SHMEM_KEY line will never be written at all. We still
have the restriction that we don't want to truncate the pidfile; document
the reasons for that a bit better.
Also, fix the pg_ctl TAP tests so they'll notice if "start -w" mode
is broken --- before, they'd just wait out the sixty seconds until
the loop gives up, and then report success anyway. (Yes, I found that
out the hard way.)
While at it, arrange for pg_ctl to not need to #include miscadmin.h;
as a rather low-level backend header, requiring that to be compilable
client-side is pretty dubious. This requires moving the #define's
associated with the pidfile into a new header file, and moving
PG_BACKEND_VERSIONSTR someplace else. For lack of a clearly better
"someplace else", I put it into port.h, beside the declaration of
find_other_exec(), since most users of that macro are passing the value to
find_other_exec(). (initdb still depends on miscadmin.h, but at least
pg_ctl and pg_upgrade no longer do.)
In passing, fix main.c so that PG_BACKEND_VERSIONSTR actually defines the
output of "postgres -V", which remarkably it had never done before.
Discussion: https://postgr.es/m/CAMkU=1xJW8e+CTotojOMBd-yzUvD0e_JZu2xHo=MnuZ4__m7Pg@mail.gmail.com
We now disallow having triggers with both transition tables and ON
INSERT OR UPDATE (which was a PG extension to the spec anyway),
because in this case it's not at all clear how the transition tables
should work for an INSERT ... ON CONFLICT query. Separate ON INSERT
and ON UPDATE triggers with transition tables are allowed, and the
transition tables for these reflect only the inserted and only the
updated tuples respectively.
Patch by Thomas Munro
Discussion: https://postgr.es/m/CAEepm%3D11KHQ0JmETJQihSvhZB5mUZL2xrqHeXbCeLhDiqQ39%3Dw%40mail.gmail.com
Buildfarm evidence shows that TCP_KEEPALIVE_THRESHOLD doesn't exist
after all on Solaris < 11. This means we need to take positive action to
prevent the TCP_KEEPALIVE code path from being taken on that platform.
I've chosen to limit it with "&& defined(__darwin__)", since it's unclear
that anyone else would follow Apple's precedent of spelling the symbol
that way.
Also, follow a suggestion from Michael Paquier of eliminating code
duplication by defining a couple of intermediate symbols for the
socket option.
In passing, make some effort to reduce the number of translatable messages
by replacing "setsockopt(foo) failed" with "setsockopt(%s) failed", etc,
throughout the affected files. And update relevant documentation so
that it doesn't claim to provide an exhaustive list of the possible
socket option names.
Like the previous commit (f0256c774), back-patch to all supported branches.
Discussion: https://postgr.es/m/20170627163757.25161.528@wrigleys.postgresql.org
Commit 330b84d8c4 didn't contemplate the case where the public schema
has been dropped and introduced a query which fails when there is no
public schema into pg_dump (when used with -c).
Adjust the query used by pg_dump to handle the case where the public
schema doesn't exist and add tests to check that such a case no longer
fails.
Back-patch the specific fix to 9.6, as the prior commit was.
Adding tests for this case involved adding support to the pg_dump
TAP tests to work with multiple databases, which, while not a large
change, is a bit much to back-patch, so that's only done in master.
Addresses bug #14650
Discussion: https://www.postgresql.org/message-id/20170512181801.1795.47483%40wrigleys.postgresql.org
Turns out that the socket option for this is named TCP_KEEPALIVE_THRESHOLD,
at least according to the tcp(7P) man page for Solaris 11. (But since that
text refers to "SunOS", it's likely pretty ancient.) It appears that the
symbol TCP_KEEPALIVE does get defined on that platform, but it doesn't
seem to represent a valid protocol-level socket option. This leads to
bleats in the postmaster log, and no tcp_keepalives_idle functionality.
Per bug #14720 from Andrey Lizenko, as well as an earlier report from
Dhiraj Chawla that nobody had followed up on. The issue's been there
since we added the TCP_KEEPALIVE code path in commit 5acd417c8, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/20170627163757.25161.528@wrigleys.postgresql.org
check_agg_arguments_walker threw an error upon seeing a SRF or window
function, but that is too aggressive: if the function is within a
sub-select then it's perfectly fine. I broke the SRF case in commit
0436f6bde by copying the logic for window functions ... but that was
broken too, and had been since commit eaccfded9.
Repair both cases in HEAD, and the window function case back to 9.3.
9.2 gets this right.
By default, wal_retrieve_retry_interval is five seconds, which is far
more than is needed in any of our TAP tests, leaving the test cases
just twiddling their thumbs for significant stretches. Moreover,
because it's so large, we get basically no testing of the retry-before-
master-is-ready code path. Hence, make PostgresNode::init set up
wal_retrieve_retry_interval = '500ms' as part of its customization of
test clusters' postgresql.conf. This shaves quite a few seconds off
the runtime of the recovery TAP tests.
Back-patch into 9.6. We have wal_retrieve_retry_interval in 9.5,
but the test infrastructure isn't there.
Discussion: https://postgr.es/m/31624.1498500416@sss.pgh.pa.us
When a walreceiver dies, the startup process will notice that and send
a PMSIGNAL_START_WALRECEIVER signal to the postmaster, asking for a new
walreceiver to be launched. There's a race condition, which at least
in HEAD is very easy to hit, whereby the postmaster might see that
signal before it processes the SIGCHLD from the walreceiver process.
In that situation, sigusr1_handler() just dropped the start request
on the floor, reasoning that it must be redundant. Eventually, after
10 seconds (WALRCV_STARTUP_TIMEOUT), the startup process would make a
fresh request --- but that's a long time if the connection could have
been re-established almost immediately.
Fix it by setting a state flag inside the postmaster that we won't
clear until we do launch a walreceiver. In cases where that results
in an extra walreceiver launch, it's up to the walreceiver to realize
it's unwanted and go away --- but we have, and need, that logic anyway
for the opposite race case.
I came across this through investigating unexpected delays in the
src/test/recovery TAP tests: it manifests there in test cases where
a master server is stopped and restarted while leaving streaming
slaves active.
This logic has been broken all along, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/21344.1498494720@sss.pgh.pa.us
The stats collector disregards inquiry messages that bear a cutoff_time
before when it last wrote the relevant stats file. That's fine, but at
startup when it reads the "permanent" stats files, it absorbed their
timestamps as if they were the times at which the corresponding temporary
stats files had been written. In reality, of course, there's no data
out there at all. This led to disregarding inquiry messages soon after
startup if the postmaster had been shut down and restarted within less
than PGSTAT_STAT_INTERVAL; which is a pretty common scenario, both for
testing and in the field. Requesting backends would hang for 10 seconds
and then report failure to read statistics, unless they got bailed out
by some other backend coming along and making a newer request within
that interval.
I came across this through investigating unexpected delays in the
src/test/recovery TAP tests: it manifests there because the autovacuum
launcher hangs for 10 seconds when it can't get statistics at startup,
thus preventing a second shutdown from occurring promptly. We might
want to do some things in the autovac code to make it less prone to
getting stuck that way, but this change is a good bug fix regardless.
In passing, also fix pgstat_read_statsfiles() to ensure that it
re-zeroes its global stats variables if they are corrupted by a
short read from the stats file. (Other reads in that function
go into temp variables, so that the issue doesn't arise.)
This has been broken since we created the separation between permanent
and temporary stats files in 8.4, so back-patch to all supported branches.
Discussion: https://postgr.es/m/16860.1498442626@sss.pgh.pa.us
pg_ctl has traditionally waited one second between probes for whether
the start or stop request has completed. That behavior was embodied
in the original shell script written in 1999 (commit 5b912b089) and
I doubt anyone's questioned it since. Nowadays, machines are a lot
faster, and the shell script is long since replaced by C code, so it's
fair to reconsider how long we ought to wait.
This patch adjusts the coding so that the wait time can be any even
divisor of 1 second, and sets the actual probe rate to 10 per second.
That's based on experimentation with the src/test/recovery TAP tests,
which include a lot of postmaster starts and stops. This patch alone
reduces the (non-parallelized) runtime of those tests from ~4m30s to
~3m5s on my machine. Increasing the probe rate further doesn't help
much, so this seems like a good number.
In the real world this probably won't have much impact, since people
don't start/stop production postmasters often, and the shutdown checkpoint
usually takes nontrivial time too. But it makes development work and
testing noticeably snappier, and that's good enough reason for me.
Also, by reducing the dead time in postmaster restart sequences, this
change has made it easier to reproduce some bugs that have been lurking
for awhile. Patches for those will follow.
Discussion: https://postgr.es/m/18444.1498428798@sss.pgh.pa.us
Remove hard-wired sleep(2) delays in 001_stream_rep.pl in favor of using
poll_query_until to check for the desired state to appear. In addition,
add such a wait before the last test in the script, as it's possible
to demonstrate failures there after upcoming improvements in pg_ctl.
(We might end up adding polling before each of the get_slot_xmins calls in
this script, but I feel no great need to do that until shown necessary.)
In passing, clarify the description strings for some of the test cases.
Michael Paquier and Craig Ringer, pursuant to a complaint from me
Discussion: https://postgr.es/m/8962.1498425057@sss.pgh.pa.us
Fix its header comment, which described the old behavior of the <N>
phrase distance operator; we missed updating that in commit 028350f61.
Also, reset errno before strtol() call, to defend against the possibility
that it was already ERANGE at entry. (The lack of complaints says that
it generally isn't, but this is at least a latent bug.) Very minor
stylistic improvements as well.
Victor Drobny noted the obsolete comment, I noted the errno issue.
Back-patch to 9.6 where this code was added, just in case the errno
issue is a live bug in some cases.
Discussion: https://postgr.es/m/2b5382fdff9b1f79d5eb2c99c4d2cbe2@postgrespro.ru
pg_import_system_collations() refused to create any ICU collations if
the current database's encoding didn't support ICU. This is wrongheaded:
initdb must initialize pg_collation in an encoding-independent way
since it might be used in other databases with different encodings.
The reason for the restriction seems to be that get_icu_locale_comment()
used icu_from_uchar() to convert the UChar-format display name, and that
unsurprisingly doesn't know what to do in unsupported encodings.
But by the same token that the initial catalog contents must be
encoding-independent, we can't allow non-ASCII characters in the comment
strings. So we don't really need icu_from_uchar() here: just check for
Unicode codes outside the ASCII range, and if there are none, the format
conversion is trivial. If there are some, we can simply not install the
comment. (In my testing, this affects only Norwegian Bokmål, which has
given us trouble before.)
For paranoia's sake, also check for non-ASCII characters in ICU locale
names, and skip such locales, as we do for libc locales. I don't
currently have a reason to believe that this will ever reject anything,
but then again the libc maintainers should have known better too.
With just the import changes, ICU collations can be found in pg_collation
in databases with unsupported encodings. This resulted in more or less
clean failures at runtime, but that's not how things act for unsupported
encodings with libc collations. Make it work the same as our traditional
behavior for libc collations by having collation lookup take into account
whether is_encoding_supported_by_icu().
Adjust documentation to match. Also, expand Table 23.1 to show which
encodings are supported by ICU.
catversion bump because of likely change in pg_collation/pg_description
initial contents in ICU-enabled builds.
Discussion: https://postgr.es/m/20c74bc3-d6ca-243d-1bbc-12f17fa4fe9a@gmail.com
The maxResultSize argument of uloc_getDisplayName is the number of
UChars in the output buffer, not the number of bytes. In principle
this could result in a stack smash, although at least in my Fedora 25
install there are no ICU locales with display names long enough to
overrun the buffer. But it's easily proven to be wrong by reducing
the length of displayname to around 20, whereupon a stack smash
does happen.
(This is a rather scary bug, because the same mistake could easily
have been made in other places; but in a quick code search looking
at uses of UChar I could not find any other instances.)
The comparison with the target rows on the subscriber side was done with
datumIsEqual(), which can have false negatives. For instance, it didn't
work reliably for text columns. So use the equality operator provided
by the type cache instead.
Also add more user documentation about replica identity requirements.
Reported-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Marco Atzeri reported that initdb would fail if "locale -a" reported
the same locale name more than once. All previous versions of Postgres
implicitly de-duplicated the results of "locale -a", but the rewrite
to move the collation import logic into C had lost that property.
It had also lost the property that locale names matching built-in
collation names were silently ignored.
The simplest way to fix this is to make initdb run the function in
if-not-exists mode, which means that there's no real use-case for
non if-not-exists mode; we might as well just drop the boolean argument
and simplify the function's definition to be "add any collations not
already known". This change also gets rid of some odd corner cases
caused by the fact that aliases were added in if-not-exists mode even
if the function argument said otherwise.
While at it, adjust the behavior so that pg_import_system_collations()
doesn't spew "collation foo already exists, skipping" messages during a
re-run; that's completely unhelpful, especially since there are often
hundreds of them. And make it return a count of the number of collations
it did add, which seems like it might be helpful.
Also, re-integrate the previous coding's property that it would make a
deterministic selection of which alias to use if there were conflicting
possibilities. This would only come into play if "locale -a" reports
multiple equivalent locale names, say "de_DE.utf8" and "de_DE.UTF-8",
but that hardly seems out of the question.
In passing, fix incorrect behavior in pg_import_system_collations()'s
ICU code path: it neglected CommandCounterIncrement, which would result
in failures if ICU returns duplicate names, and it would try to create
comments even if a new collation hadn't been created.
Also, reorder operations in initdb so that the 'ucs_basic' collation
is created before calling pg_import_system_collations() not after.
This prevents a failure if "locale -a" were to report a locale named
that. There's no reason to think that that ever happens in the wild,
but the old coding would have survived it, so let's be equally robust.
Discussion: https://postgr.es/m/20c74bc3-d6ca-243d-1bbc-12f17fa4fe9a@gmail.com
After sitting idle and fully replayed for a while and then encountering
a new burst of WAL activity, we interpolate between an ancient sample and the
not-yet-reached one for the new traffic. That produced a corner case report
of lag after receiving first new reply from standby, which might sometimes
be a large spike.
Correct this by resetting last_read time and handle that new case.
Author: Thomas Munro
Callers of icu_to_uchar() neglected to pfree the result string when done
with it. This results in catastrophic memory leaks in varstr_cmp(),
because of our prevailing assumption that btree comparison functions don't
leak memory. For safety, make all the call sites clean up leaks, though
I suspect that we could get away without it in formatting.c. I audited
callers of icu_from_uchar() as well, but found no places that seemed to
have a comparable issue.
Add function API specifications for icu_to_uchar() and icu_from_uchar();
the lack of any thought-through specification is perhaps not unrelated
to the existence of this bug in the first place. Fix icu_to_uchar()
to guarantee a nul-terminated result; although no existing caller appears
to care, the fact that it would have been nul-terminated except in
extreme corner cases seems ideally designed to bite someone on the rear
someday. Fix ucnv_fromUChars() destCapacity argument --- in the worst
case, that could perhaps have led to a non-nul-terminated result, too.
Fix icu_from_uchar() to have a more reasonable definition of the function
result --- no callers are actually paying attention, so this isn't a live
bug, but it's certainly sloppily designed. Const-ify icu_from_uchar()'s
input string for consistency.
That is not the end of what needs to be done to these functions, but
it's as much as I have the patience for right now.
Discussion: https://postgr.es/m/1955.1498181798@sss.pgh.pa.us
It's essential that initdb.c's setup_depend() scan each system catalog
that could contain objects that need to have "p" (pin) entries in pg_depend
or pg_shdepend. Forgetting to add that, either when a catalog is first
invented or when it first acquires DATA() entries, is an obvious bug
hazard. We can detect such omissions at reasonable cost by probing every
OID-containing system catalog to see whether the lowest-numbered OID in it
is pinned. If so, the catalog must have been properly accounted for in
setup_depend(). If the lowest OID is above FirstNormalObjectId then the
catalog must have been empty at the end of initdb, so it doesn't matter.
There are a small number of catalogs whose first entry is made later in
initdb than setup_depend(), resulting in nonempty expected output of the
test, but these can be manually inspected to see that they are OK. Any
future mistake of this ilk will manifest as a new entry in the test's
output.
Since pg_conversion is already in the test's output, add it to the set of
catalogs scanned by setup_depend(). That has no effect today (hence, no
catversion bump here) but it will protect us if we ever do add pin-worthy
conversions.
This test is very much like the catalog sanity checks embodied in
opr_sanity.sql and type_sanity.sql, but testing pg_depend doesn't seem to
fit naturally into either of those scripts' charters. Hence, invent a new
test script misc_sanity.sql, which can be a home for this as well as tests
on any other catalogs we might want in future.
Discussion: https://postgr.es/m/8068.1498155068@sss.pgh.pa.us
There was a logic error in a formula, reported by Atsushi Torokoshi.
Ashutosh Bapat furthermore recommended to change notation for a variable
that was re-using a letter from a previous formula, though his proposed
patch contained a small error in attributing what the new letter is for.
Also, instead of his proposed d' I ended up using e, to avoid confusing
the reader with quotes which are used differently in the explaining
prose.
Bugs appeared in commit 2686ee1b7c.
Reported-by: Atsushi Torikoshi, Ashutosh Bapat
Discussion: https://postgr.es/m/CAFjFpRd03YojT4wyuDcjhCfYuygfWfnt68XGn2CKv=rcjRCtTA@mail.gmail.com
The autovacuum launcher doesn't actually do anything with its DSA other
than creating it and attaching to it, but it's been observed that after
longjmp'ing to the standard error handling block (for example after
getting SIGINT) the autovacuum enters an infinite loop reporting that it
cannot attach to its DSA anymore (which is correct, because it's already
attached to it.) Fix by only attempting to attach if not already
attached.
I introduced this bug together with BRIN autosummarization in
7526e10224.
Reported-by: Yugo Nagata.
Author: Thomas Munro. I added the comment to go with it.
Discussion: https://postgr.es/m/20170621211538.0c9eae73.nagata@sraoss.co.jp
I misplaced the IF NOT EXISTS clause in commit 7b504eb282, before the
word STATISTICS. Put it where it belongs.
Patch written independently by Amit Langote and myself. I adopted his
submitted test case with a slight edit also.
Reported-by: Bruno Wolff III
Discussion: https://postgr.es/m/20170621004237.GB8337@wolff.to
When promoting a standby just after a XLOG_SWITCH record was replayed,
and next segment(s) are already are locally available (via walsender,
restore_command + trigger/recovery target), that segment could
accidentally be recycled onto the past of the new timeline. Later
checkpointer would create a .ready file for it, assuming there was an
error during creation, and it would get archived. That causes trouble
if another standby is later brought up from a basebackup from before
the timeline creation, because it would try to read the
segment, because XLogFileReadAnyTLI just tries all possible timelines,
which doesn't have valid contents. Thus replay would fail.
The problem, if already occurred, can be fixed by removing the segment
and/or having restore_command filter it out.
The reason for the creation of such "phantom" segments was, that after
an XLOG_SWITCH record the EndOfLog variable points to the beginning of
the next segment, and RemoveXlogFile() used XLByteToPrevSeg().
Normally RemoveXlogFile() doing so is harmless, because the last
segment will still exist preventing InstallXLogFileSegment() from
causing harm, but just after promotion there's no previous segment on
the new timeline.
Fix that by using XLByteToSeg() instead of XLByteToPrevSeg().
Author: Andres Freund
Reported-By: Greg Burek
Discussion: https://postgr.es/m/20170619073026.zcwpe6mydsaz5ygd@alap3.anarazel.de
Backpatch: 9.2-, bug older than all supported versions
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Update version-checking code and list of switches. Delete obsolete
quasi-support for using GNU indent. Remove a lot of no-longer-needed
workarounds for bugs of the old version, and improve comments for
the hacks that remain. Update run_build() subroutine to fetch the
pg_bsd_indent code from the newly established git repo for it.
In passing, fix pgindent to not overwrite files that require no changes;
this makes it a bit more friendly to run on a built tree.
Adjust relevant documentation.
Remove indent.bsd.patch; it's not relevant anymore (and was obsolete
long ago anyway). Likewise remove pgcppindent, since we're no longer
in the business of shipping C++ code.
Piotr Stefaniak is responsible for most of the algorithmic changes
to the pgindent script; I did the rest.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Currently, there are no built-in functions that are SECURITY DEFINER.
But we just found an instance where one was mistakenly marked that way,
so it seems prudent to add a test about it. If we ever grow some
functions that are intentionally SECURITY DEFINER, we can alter the
expected output of this test, or adjust the query to filter out functions
for which it's okay.
Per suggestion from Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoYXg7McY33+jbWmG=rS-HNUur0S6W8Q8kVNFf7epFimVA@mail.gmail.com
When commit 0f33a719fd removed the
instructions to start/stop the new cluster before running rsync, it was
now possible for pg_resetwal/pg_resetxlog to leave the final WAL record
at wal_level=minimum, preventing upgraded standby servers from
reconnecting.
This patch fixes that by having pg_upgrade unconditionally start/stop
the new cluster after pg_resetwal/pg_resetxlog has run.
Backpatch through 9.2 since, though the instructions were added in PG
9.5, they worked all the way back to 9.2.
Discussion: https://postgr.es/m/20170620171844.GC24975@momjian.us
Backpatch-through: 9.2
load_libraries(), which processes the various xxx_preload_libraries GUCs,
was parsing them using SplitIdentifierString() which isn't really
appropriate for values that could be path names: it downcases unquoted
text, and it doesn't allow embedded whitespace unless quoted.
Use SplitDirectoriesString() instead. That also allows us to simplify
load_libraries() a bit, since canonicalize_path() is now done for it.
While this definitely seems like a bug fix, it has the potential to
break configuration settings that accidentally worked before because
of the downcasing behavior. Also, there's an easy workaround for the
bug, namely to double-quote troublesome text. Hence, no back-patch.
QL Zhuo, tweaked a bit by me
Discussion: https://postgr.es/m/CAB-oJtxHVDc3H+Km3CjB9mY1VDzuyaVH_ZYSz7iXcRqCtb93Ew@mail.gmail.com
Viewing a table with \d in psql also shows the publications at table is
in. If a publication is concurrently dropped, this shows an error,
because the view pg_publication_tables internally uses
pg_get_publication_tables(), which uses a catalog snapshot. This can be
particularly annoying if a for-all-tables publication is concurrently
dropped.
To avoid that, write the query in psql differently. Expose the function
pg_relation_is_publishable() to SQL and write the query using that.
That still has a risk of being affected by concurrent catalog changes,
but in this case it would be a table drop that causes problems, and then
the psql \d command wouldn't be interesting anymore anyway.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
When materialized views were added, psql's \d commands were made to
treat them as a separate object category ... but not everyplace in the
documentation or comments got the memo.
Noted by David Johnston. Back-patch to 9.3 where matviews came in.
Discussion: https://postgr.es/m/CAKFQuwb27M3VXRhHErjCpkWwN9eKThbqWb1=trtoXi9_ejqPXQ@mail.gmail.com
David Rowley found that the "use the smallest per-column selectivity"
heuristic applied in some cases by get_foreign_key_join_selectivity()
was badly off if the FK columns are independent, producing estimates
much worse than we got before that code was added in 9.6.
One case where that heuristic was used was for LEFT and FULL outer joins
with the referenced rel on the outside of the join. But we should not
really need to special-case those here. eqjoinsel() never has had such a
special case; the correction is applied by calc_joinrel_size_estimate()
instead. Let's just estimate such cases like inner joins and rely on that
later adjustment. (I think there was something of a thinko here, in that
the comments seem to be thinking about the selectivity as defined for
semi/anti joins; but that shouldn't apply to left/full joins.) Add a
regression test exercising such a case to show that this is sane in
at least some cases.
The other case where we used that heuristic was for SEMI/ANTI outer joins,
either if the referenced rel was on the outside, or if it was on the inside
but was part of a join within the RHS. In either case, the FK doesn't give
us a lot of traction towards estimating the selectivity. To ensure that
we don't have regressions from what happened before 9.6, let's punt by
ignoring the FK in such cases and applying the traditional selectivity
calculation. (We might be able to improve on that later, but for now
I just want to be sure it's not worse than 9.5.)
Report and patch by David Rowley, simplified a bit by me. Back-patch
to 9.6 where this code was added.
Discussion: https://postgr.es/m/CAKJS1f8NO8oCDcxrteohG6O72uU1saEVT9qX=R8pENr5QWerXw@mail.gmail.com
The combination of -Z -Fp and output to stdout resulted in corrupted
output data, because we left stdout in text mode, resulting in newline
conversion being done on the compressed stream. Switch stdout to binary
mode for this case, at the same place where we do it for non-text output
formats.
Report and patch by Kuntal Ghosh, tested by Ashutosh Sharma and Neha
Sharma. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGz5QCJPvbBjXAmJuGx1B_41yVCetAJhp7rtaDf7XQGWuB1GSw@mail.gmail.com
When, during logical decoding, a transaction gets too big, it's
contents get spilled to disk. Not just the top-transaction gets
spilled, but *also* all of its subtransactions, even if they're not
that large themselves. Unfortunately we didn't clean up
such small spilled subtransactions from disk.
Fix that, by keeping better track of whether a transaction has been
spilled to disk.
Author: Andres Freund
Reported-By: Dmitriy Sarafannikov, Fabrízio de Royes Mello
Discussion:
https://postgr.es/m/1457621358.355011041@f382.i.mail.ruhttps://postgr.es/m/CAFcNs+qNMhNYii4nxpO6gqsndiyxNDYV0S=JNq0v_sEE+9PHXg@mail.gmail.com
Backpatch: 9.4-, where logical decoding was introduced
This should normally be determined by a configure check, but until
someone figures out how to do that on Windows, it's better that the code
uses the new function by default.
If a .c or .h file corresponds to a .y or .l file, skip indenting it.
There's no point in reindenting derived files, and these files tend to
confuse pgindent. (Which probably indicates a bug in BSD indent, but
I can't get excited about trying to fix it.)
For the same reasons, add src/backend/utils/fmgrtab.c to the set of
files excluded by src/tools/pgindent/exclude_file_patterns.
The point of doing this is that it makes it safe to run pgindent over
the tree without doing "make maintainer-clean" first. While these are
not the only derived .c/.h files in the tree, they are the only ones
pgindent fails on. Removing that prerequisite step results in one less
way to mess up a pgindent run, and it's necessary if we ever hope to get
to the ease of running pgindent via "make indent".
Windows uses a separate code path for libc locales. The code previously
ended up there also if an ICU collation should be used, leading to a
crash.
Reported-by: Ashutosh Sharma <ashu.coek88@gmail.com>
When a new base type is created using the old-style procedure of first
creating the input/output functions with "opaque" in place of the base
type, the "opaque" argument/return type is changed to the final base type,
on CREATE TYPE. However, we did not create a pg_depend record when doing
that, so the functions were left not depending on the type.
Fixes bug #14706, reported by Karen Huddleston.
Discussion: https://www.postgresql.org/message-id/20170614232259.1424.82774@wrigleys.postgresql.org
The _equalTableFunc() omission of coltypmods has semantic significance,
but I did not track down resulting user-visible bugs, if any. The other
changes are cosmetic only, affecting order. catversion bump due to
readfuncs.c field order change.
We had three occurrences of essentially the same coding pattern
wherein we tried to retrieve a query result from a libpq connection
without blocking. In the case where PQconsumeInput failed (typically
indicating a lost connection), all three loops simply gave up and
returned, forgetting to clear any previously-collected PGresult
object. Since those are malloc'd not palloc'd, the oversight results
in a process-lifespan memory leak.
One instance, in libpqwalreceiver, is of little significance because
the walreceiver process would just quit anyway if its connection fails.
But we might as well fix it.
The other two instances, in postgres_fdw, are somewhat more worrisome
because at least in principle the scenario could be repeated, allowing
the amount of memory leaked to build up to something worth worrying
about. Moreover, in these cases the loops contain CHECK_FOR_INTERRUPTS
calls, as well as other calls that could potentially elog(ERROR),
providing another way to exit without having cleared the PGresult.
Here we need to add PG_TRY logic similar to what exists in quite a
few other places in postgres_fdw.
Coverity noted the libpqwalreceiver bug; I found the other two cases
by checking all calls of PQconsumeInput.
Back-patch to all supported versions as appropriate (9.2 lacks
postgres_fdw, so this is really quite unexciting for that branch).
Discussion: https://postgr.es/m/22620.1497486981@sss.pgh.pa.us
Show "All tables" property in \dRp and \dRp+. Don't list tables for
such publications in \dRp+, since it's redundant and the list could be
very long.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Jeff Janes <jeff.janes@gmail.com>
Previously we required every exported transaction to have an xid
assigned. That was used to check that the exporting transaction is
still running, which in turn is needed to guarantee that that
necessary rows haven't been removed in between exporting and importing
the snapshot.
The exported xid caused unnecessary problems with logical decoding,
because slot creation has to wait for all concurrent xid to finish,
which in turn serializes concurrent slot creation. It also
prohibited snapshots to be exported on hot-standby replicas.
Instead export the virtual transactionid, which avoids the unnecessary
serialization and the inability to export snapshots on standbys. This
changes the file name of the exported snapshot, but since we never
documented what that one means, that seems ok.
Author: Petr Jelinek, slightly editorialized by me
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/f598b4b8-8cd7-0d54-0939-adda763d8c34@2ndquadrant.com
In a CHECK clause, a null result means true, whereas in a WHERE clause
it means false. predtest.c provided different functions depending on
which set of semantics applied to the predicate being proved, but had
no option to control what a null meant in the clauses provided as
axioms. Add one.
Use that in the partitioning code when figuring out whether the
validation scan on a new partition can be skipped. Rip out the
old logic that attempted (not very successfully) to compensate
for the absence of the necessary support in predtest.c.
Ashutosh Bapat and Robert Haas, reviewed by Amit Langote and
incorporating feedback from Tom Lane.
Discussion: http://postgr.es/m/CAFjFpReT_kq_uwU_B8aWDxR7jNGE=P0iELycdq5oupi=xSQTOw@mail.gmail.com
The optimized code in 728bd991c3 contains a few invalid locking
sequences. To wit, the original code would try to acquire an lwlock
that it already holds. Avoid this by moving lock acquisitions to
higher-level code, and install appropriate assertions in low-level that
the correct mode is held.
Authors: Michael Paquier, Álvaro Herrera
Reported-By: chuanting wang
Bug: #14680
Discussion: https://postgr.es/m/20170531033228.1487.10124@wrigleys.postgresql.org
expression_returns_set() used to short-circuit its recursion upon
seeing certain node types, such as DistinctExpr, that it knew the
executor did not support set-valued arguments for. That was never
inherent, though, just a reflection of laziness in execQual.c.
With the new implementation of SRFs there is no reason to think
that any scalar-valued expression node could not have a set-valued
subexpression, except for AggRefs and WindowFuncs where we know there
is a parser check rejecting it. And indeed, the shortcut causes
unexpected failures for cases such as a SRF underneath DistinctExpr,
because the planner stops looking for SRFs too soon.
Discussion: https://postgr.es/m/5259.1497044025@sss.pgh.pa.us
In commits 2f5c9d9c9 and ab0289651 we invented an abstraction layer
to insulate catalog manipulations from direct heap update calls.
But evidently some patches that hadn't landed in-tree at that point
didn't get the memo completely. Fix a couple of direct calls to
simple_heap_delete to use CatalogTupleDelete instead; these appear
to have been added in commits 7c4f52409 and 7b504eb28. This change is
purely cosmetic ATM, but there's no point in having an abstraction layer
if we allow random code to break it.
Masahiko Sawada and Tom Lane
Discussion: https://postgr.es/m/CAD21AoDOPRSVcwbnCN3Y1n_68ATyTspsU6=ygtHz_uY0VcdZ8A@mail.gmail.com
Table partitioning, introduced in commit f0e44751d7, added a new
relkind - RELKIND_PARTITIONED_TABLE. Update a couple of places in
PL/pgSQL to handle it. Specifically plpgsql_parse_cwordtype() and
build_row_from_class() needed updating in order to make table%ROWTYPE
and table.col%TYPE work for partitioned tables.
Dean Rasheed, reviewed by Amit Langote.
Discussion: https://postgr.es/m/CAEZATCUnNOKN8sLML9jUzxecALWpEXK3a3W7y0PgFR4%2Buhgc%3Dg%40mail.gmail.com
When we reimplemented SRFs in commit 69f4b9c85, our initial choice was
to allow the behavior to vary from historical practice in cases where a
SRF call appeared within a conditional-execution construct (currently,
only CASE or COALESCE). But that was controversial to begin with, and
subsequent discussion has resulted in a consensus that it's better to
throw an error instead of executing the query differently from before,
so long as we can provide a reasonably clear error message and a way to
rewrite the query.
Hence, add a parser mechanism to allow detection of such cases during
parse analysis. The mechanism just requires storing, in the ParseState,
a pointer to the set-returning FuncExpr or OpExpr most recently emitted
by parse analysis. Then the parsing functions for CASE and COALESCE can
detect the presence of a SRF in their arguments by noting whether this
pointer changes while analyzing their arguments. Furthermore, if it does,
it provides a suitable error cursor location for the complaint. (This
means that if there's more than one SRF in the arguments, the error will
point at the last one to be analyzed not the first. While connoisseurs of
parsing behavior might find that odd, it's unlikely the average user would
ever notice.)
While at it, we can also provide more specific error messages than before
about some pre-existing restrictions, such as no-SRFs-within-aggregates.
Also, reject at parse time cases where a NULLIF or IS DISTINCT FROM
construct would need to return a set. We've never supported that, but the
restriction is depended on in more subtle ways now, so it seems wise to
detect it at the start.
Also, provide some documentation about how to rewrite a SRF-within-CASE
query using a custom wrapper SRF.
It turns out that the information_schema.user_mapping_options view
contained an instance of exactly the behavior we're now forbidding; but
rewriting it makes it more clear and safer too.
initdb forced because of user_mapping_options change.
Patch by me, with error message suggestions from Alvaro Herrera and
Andres Freund, pursuant to a complaint from Regina Obe.
Discussion: https://postgr.es/m/000001d2d5de$d8d66170$8a832450$@pcorp.us
Table partitioning, introduced in commit f0e44751d7, added a new
relkind - RELKIND_PARTITIONED_TABLE. Update relation_is_updatable() to
handle it. Specifically, partitioned tables and simple views built on
top of them are updatable.
This affects the SQL-callable functions pg_relation_is_updatable() and
pg_column_is_updatable(), and the views information_schema.views and
information_schema.columns.
Dean Rasheed, reviewed by Ashutosh Bapat.
Discussion: https://postgr.es/m/CAEZATCXnbiFkMXgF4Ez1pmM2c-tS1z33bSq7OGbw7QQhHov%2B6Q%40mail.gmail.com
Previously, you could write _null_ in a BKI DATA line for a column that's
supposed to be NOT NULL and initdb would let it pass, probably breaking
subsequent accesses to the row. No doubt the original coding overlooked
this simple sanity check because in the beginning we didn't have any way
to mark catalog columns NOT NULL at initdb time.
This will not work on restore, but it will allow dumping out pg_catalog
for research and documentation.
Reported-by: Neil Anderson <neil.t.anderson@gmail.com>
Bug: #14701
ExecInitModifyTable() thought there was a plan per partition, but no,
there's only one. The problem had escaped detection so far because there
would only be visible misbehavior if there were a SubPlan (not an InitPlan)
in the quals being duplicated for each partition. However, valgrind
detected a bogus memory access in test cases added by commit 4f7a95be2,
and investigation of that led to discovery of the bug. The additional
test case added here crashes without the patch.
Patch by Amit Langote, test case by me.
Discussion: https://postgr.es/m/10974.1497227727@sss.pgh.pa.us
During pg_upgrade's restore run, all relfilenode choices should be
overridden by commands in the dump script. If we ever find ourselves
choosing a relfilenode in the ordinary way, someone blew it. Likewise for
pg_type OIDs. Since pg_upgrade might well succeed anyway, if there happens
not to be a conflict during the regression test run, we need assertions
here to keep us on the straight and narrow.
We might someday be able to remove the assertion in GetNewRelFileNode,
if pg_upgrade is rewritten to remove its assumption that old and new
relfilenodes always match. But it's hard to see how to get rid of the
pg_type OID constraint, since those OIDs are embedded in user tables
in some cases.
Back-patch as far as 9.5, because of the risk of back-patches breaking
something here even if it works in HEAD. I'd prefer to go back further,
but 9.4 fails both assertions due to get_rel_infos()'s use of a temporary
table. We can't use the later-branch solution of a CTE for compatibility
reasons (cf commit 5d16332e9), and it doesn't seem worth inventing some
other way to do the query. (I did check, by dint of changing the Asserts
to elog(WARNING), that there are no other cases of unwanted OID assignments
during 9.4's regression test run.)
Discussion: https://postgr.es/m/19785.1497215827@sss.pgh.pa.us
It's not necessary for it to do that, since OWNED BY requires only ordinary
catalog updates and doesn't affect future sequence values. And pg_upgrade
needs to use OWNED BY without having it change the sequence's relfilenode.
Commit 3d79013b9 broke this by making all forms of ALTER SEQUENCE change
the relfilenode; that seems to be the explanation for the hard-to-reproduce
buildfarm failures we've been seeing since then.
Discussion: https://postgr.es/m/19785.1497215827@sss.pgh.pa.us
The original code only added ICU_CFLAGS to the backend build. But it is
also needed for building external modules that include pg_locale.h. So
add it to the global CPPFLAGS. (This is only relevant if ICU is not in
a compiler default path, so it apparently hasn't bitten many.)
When a table sync worker is in waiting state and the subscription table
entry is removed because of a concurrent subscription refresh, the
worker could be left orphaned. To avoid that, explicitly stop the
worker when the pg_subscription_rel entry is removed.
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
generateSerialExtraStmts() was sloppy about handling the case where
SEQUENCE NAME is given with a not-schema-qualified name. It was generating
a CreateSeqStmt with an unqualified sequence name, and an AlterSeqStmt
whose "owned_by" DefElem contained a T_String Value with a null string
pointer in the schema-name position. The generated nextval() argument was
also underqualified. This accidentally failed to fail at runtime, but only
so long as the current default creation namespace at runtime is the right
namespace. That's bogus; the parse-time transformation is supposed to be
inserting the right schema name in all cases, so as to avoid any possible
skew in that selection. I'm not sure this could fail in pg_dump's usage,
but it's still wrong; we have had real bugs in this area before adopting
the policy that parse_utilcmd.c should generate only fully-qualified
auxiliary commands. A slightly lesser problem, which is what led me to
notice this in the first place, is that pprint() dumped core on the
AlterSeqStmt because of the bogus T_String.
Noted while poking into the open problem with ALTER SEQUENCE breaking
pg_upgrade.
The new partitioned table capability added a new relkind, namely
RELKIND_PARTITIONED_TABLE. Update fireRIRrules() to apply RLS
policies on RELKIND_PARTITIONED_TABLE as it does RELKIND_RELATION.
In addition, add RLS regression test coverage for partitioned tables.
Issue raised by Fakhroutdinov Evgenievich and patch by Mike Palmiotto.
Regression test editorializing by me.
Discussion: https://postgr.es/m/flat/20170601065959.1486.69906@wrigleys.postgresql.org
When a table is removed from a subscription before the tablesync worker
could start, this would previously result in an error when reading
pg_subscription_rel. Now we just ignore this.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
If you accidentally pass a host name in the hostaddr option, e.g.
hostaddr=localhost, you get an error like:
psql: could not translate host name "localhost" to address: Name or service not known
That's a bit confusing, because it implies that we tried to look up
"localhost" in DNS, but it failed. To make it more clear that we tried to
parse "localhost" as a numeric network address, change the message to:
psql: could not parse network address "localhost": Name or service not known
Discussion: https://www.postgresql.org/message-id/10badbc6-4d5a-a769-623a-f7ada43e14dd@iki.fi
Previously the exit handling was only able to exit from within the
main loop, and not from within the backend code it calls. Fix that by
using the standard die() SIGTERM handler, and adding the necessary
CHECK_FOR_INTERRUPTS() call.
This requires adding yet another process-type-specific branch to
ProcessInterrupts(), which hints that we probably should generalize
that handling. But that's work for another day.
Author: Petr Jelinek
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/fe072153-babd-3b5d-8052-73527a6eb657@2ndquadrant.com
Since 7c4f52409a (merged in v10), a shutdown master is reported as
FATAL: unexpected result after CommandComplete: server closed the connection unexpectedly
by walsender. It used to be
LOG: replication terminated by primary server
FATAL: could not send end-of-streaming message to primary: no COPY in progress
while the old message clearly is not perfect, it's definitely better
than what's reported now.
The change comes from the attempt to handle finished COPYs without
erroring out, needed for the new logical replication, which wasn't
needed before.
There's probably better ways to handle this, but for now just
explicitly check for a closed connection.
Author: Petr Jelinek
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/f7c7dd08-855c-e4ed-41f4-d064a6c0665a@2ndquadrant.com
Backpatch: -
Doing a cross-version upgrade test with test.sh evidently hasn't been
tested since circa 9.2, because the script lacked case branches for
old-version servers newer than 9.1. Future-proof that a bit, and
clean up breakage induced by our recent drop of V0 function call
protocol (namely that oldstyle_length() isn't in the regression
suite anymore).
(This isn't enough to make the test work perfectly cleanly across
versions, but at least it finishes and provides dump files that
you can diff manually. One issue I didn't touch is that we might
want to execute the "reindex_hash.sql" file in the new DB before
dumping it, so that the hash indexes don't vanish from the dump.)
Improve the TESTING doc file: put the tl;dr version at the top not
the bottom, and bring its explanation of how to run a cross-version
test up to speed, since the installcheck target isn't there and won't
be resurrected. Improve the comment in the Makefile about why not.
In passing, teach .gitignore and "make clean" about a couple more
junk output files.
Discussion: https://postgr.es/m/14058.1496892482@sss.pgh.pa.us
Most of the improvements were in the new SCRAM code:
* In SCRAM protocol violation messages, use errdetail to provide the
details.
* If pg_backend_random() fails, throw an ERROR rather than just LOG. We
shouldn't continue authentication if we can't generate a random nonce.
* Use ereport() rather than elog() for the "invalid SCRAM verifier"
messages. They shouldn't happen, if everything works, but it's not
inconceivable that someone would have invalid scram verifiers in
pg_authid, e.g. if a broken client application was used to generate the
verifier.
But this change applied to old code:
* Use ERROR rather than COMMERROR for protocol violation errors. There's
no reason to not tell the client what they did wrong. The client might be
confused already, so that it cannot read and display the error correctly,
but let's at least try. In the "invalid password packet size" case, we
used to actually continue with authentication anyway, but that is now a
hard error.
Patch by Michael Paquier and me. Thanks to Daniel Varrazzo for spotting
the typo in one of the messages that spurred the discussion and these
larger changes.
Discussion: https://www.postgresql.org/message-id/CA%2Bmi_8aZYLhuyQi1Jo0hO19opNZ2OEATEOM5fKApH7P6zTOZGg%40mail.gmail.com
A logical replication worker should not insert new rows into
pg_subscription_rel, only update existing rows, so that there are no
races if a concurrent refresh removes rows. Adjust the API to be able
to choose that behavior.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Since tuple-routing implicitly checks the partitioning constraints
at least for the levels of the partitioning hierarchy it traverses,
there's normally no need to revalidate the partitioning constraint
after performing tuple routing. However, if there's a BEFORE trigger
on the target partition, it could modify the tuple, causing the
partitioning constraint to be violated. Catch that case.
Also, instead of checking the root table's partition constraint after
tuple-routing, check it beforehand. Otherwise, the rules for when
the partitioning constraint gets checked get too complicated, because
you sometimes have to check part of the constraint but not all of it.
This effectively reverts commit 39162b2030
in favor of a different approach altogether.
Report by me. Initial debugging by Jeevan Ladhe. Patch by Amit
Langote, reviewed by me.
Discussion: http://postgr.es/m/CA+Tgmoa9DTgeVOqopieV8d1QRpddmP65aCdxyjdYDoEO5pS5KA@mail.gmail.com
If authentication over an SSL connection fails, with sslmode=prefer,
libpq will reconnect without SSL and retry. However, we did not clear
the variables related to GSS, SSPI, and SASL authentication state, when
reconnecting. Because of that, the second authentication attempt would
always fail with a "duplicate GSS/SASL authentication request" error.
pg_SSPI_startup did not check for duplicate authentication requests like
the corresponding GSS and SASL functions, so with SSPI, you would leak
some memory instead.
Another way this could manifest itself, on version 10, is if you list
multiple hostnames in the "host" parameter. If the first server requests
Kerberos or SCRAM authentication, but it fails, the attempts to connect to
the other servers will also fail with "duplicate authentication request"
errors.
To fix, move the clearing of authentication state from closePGconn to
pgDropConnection, so that it is cleared also when re-connecting.
Patch by Michael Paquier, with some kibitzing by me.
Backpatch down to 9.3. 9.2 has the same bug, but the code around closing
the connection is somewhat different, so that this patch doesn't apply.
To fix this in 9.2, I think we would need to back-port commit 210eb9b743
first, and then apply this patch. However, given that we only bumped into
this in our own testing, we haven't heard any reports from users about
this, and that 9.2 will be end-of-lifed in a couple of months anyway, it
doesn't seem worth the risk and trouble.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRuOUm0MyJaUy9L3eXYJU3AKCZ-0-03=-aDTZJGV4GyWw@mail.gmail.com
The logic to free the buffer after the gss_init_sec_context() call was
always a bit wonky. Because gss_init_sec_context() sets the GSS context
variable, conn->gctx, we would in fact always attempt to free the buffer.
That only works, because previously conn->ginbuf.value was initialized to
NULL, and free(NULL) is a no-op. Commit 61bf96cab0 refactored things so
that the GSS input token buffer is allocated locally in pg_GSS_continue,
and not held in the PGconn object. After that, the now-local ginbuf.value
variable isn't initialized when it's not used, so we pass a bogus pointer
to free().
To fix, only try to free the input buffer if we allocated it. That was the
intention, certainly after the refactoring, and probably even before that.
But because there's no live bug before the refactoring, I refrained from
backpatching this.
The bug was also independently reported by Graham Dutton, as bug #14690.
Patch reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/6288d80e-a0bf-d4d3-4e12-7b79c77f1771%40iki.fi
Discussion: https://www.postgresql.org/message-id/20170605130954.1438.90535%40wrigleys.postgresql.org
The logical replication apply worker uses the subscription name as
application name, except for table sync. This was incorrectly set to
use the replication slot name, which might be different, in one case.
Also add a comment why the other case is different.
The larger part of this patch replaces usages of MyProc->procLatch
with MyLatch. The latter works even early during backend startup,
where MyProc->procLatch doesn't yet. While the affected code
shouldn't run in cases where it's not initialized, it might get copied
into places where it might. Using MyLatch is simpler and a bit faster
to boot, so there's little point to stick with the previous coding.
While doing so I noticed some weaknesses around newly introduced uses
of latches that could lead to missed events, and an omitted
CHECK_FOR_INTERRUPTS() call in worker_spi.
As all the actual bugs are in v10 code, there doesn't seem to be
sufficient reason to backpatch this.
Author: Andres Freund
Discussion:
https://postgr.es/m/20170606195321.sjmenrfgl2nu6j63@alap3.anarazel.dehttps://postgr.es/m/20170606210405.sim3yl6vpudhmufo@alap3.anarazel.de
Backpatch: -
Make apply busy wait check the catalog instead of shmem state to ensure
that next transaction will see the expected table synchronization state.
Also make the handover always go through same set of steps to make the
overall process easier to understand and debug.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tested-by: Mark Kirkwood <mark.kirkwood@catalyst.net.nz>
Tested-by: Erik Rijkers <er@xs4all.nl>
Consistent with what we do for indexes, we shouldn't try to record
dependencies on collation OID 0 or the default collation OID (which
is pinned). Also, the fact that indcollation and partcollation can
contain zero OIDs when the data type is not collatable should be
documented.
Amit Langote, per a complaint from me.
Discussion: http://postgr.es/m/CA+Tgmoba5mtPgM3NKfG06vv8na5gGbVOj0h4zvivXQwLw8wXXQ@mail.gmail.com
This allows to cancel commands run over replication connections. While
it might have some use before v10, it has become important now that
normal SQL commands are allowed in database connected walsender
connections.
Author: Petr Jelinek
Reviewed-By: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/7966f454-7cd7-2b0c-8b70-cdca9d5a8c97@2ndquadrant.com
Because walsender and normal backends share the same main loop it's
problematic to have two different flag variables, set in signal
handlers, indicating a pending configuration reload. Only certain
walsender commands reach code paths checking for the
variable (START_[LOGICAL_]REPLICATION, CREATE_REPLICATION_SLOT
... LOGICAL, notably not base backups).
This is a bug present since the introduction of walsender, but has
gotten worse in releases since then which allow walsender to do more.
A later patch, not slated for v10, will similarly unify SIGHUP
handling in other types of processes as well.
Author: Petr Jelinek, Andres Freund
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20170423235941.qosiuoyqprq4nu7v@alap3.anarazel.de
Backpatch: 9.2-, bug is present since 9.0
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and
throws a PANIC if so. At that point, only walsenders are still
active, so one might think this could not happen, but walsenders can
also generate WAL, for instance in BASE_BACKUP and logical decoding
related commands (e.g. via hint bits). So they can trigger this panic
if such a command is run while the shutdown checkpoint is being
written.
To fix this, divide the walsender shutdown into two phases. First,
checkpointer, itself triggered by postmaster, sends a
PROCSIG_WALSND_INIT_STOPPING signal to all walsenders. If the backend
is idle or runs an SQL query this causes the backend to shutdown, if
logical replication is in progress all existing WAL records are
processed followed by a shutdown. Otherwise this causes the walsender
to switch to the "stopping" state. In this state, the walsender will
reject any further replication commands. The checkpointer begins the
shutdown checkpoint once all walsenders are confirmed as
stopping. When the shutdown checkpoint finishes, the postmaster sends
us SIGUSR2. This instructs walsender to send any outstanding WAL,
including the shutdown checkpoint record, wait for it to be replicated
to the standby, and then exit.
Author: Andres Freund, based on an earlier patch by Michael Paquier
Reported-By: Fujii Masao, Andres Freund
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
Backpatch: 9.4, where logical decoding was introduced
The non-participation in procsignal was a problem for both changes in
master, e.g. parallelism not working for normal statements run in
walsender backends, and older branches, e.g. recovery conflicts and
catchup interrupts not working for logical decoding walsenders.
This commit thus replaces the previous WalSndXLogSendHandler with
procsignal_sigusr1_handler. In branches since db0f6cad48 that can
lead to additional SetLatch calls, but that only rarely seems to make
a difference.
Author: Andres Freund
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20170421014030.fdzvvvbrz4nckrow@alap3.anarazel.de
Backpatch: 9.4, earlier commits don't seem to benefit sufficiently
This reverts commit 086221cf6b, which
was made to master only.
The approach implemented in the above commit has some issues. While
those could easily be fixed incrementally, doing so would make
backpatching considerably harder, so instead first revert this patch.
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
There was a grammar ambiguity between SET PUBLICATION name REFRESH and
SET PUBLICATION SKIP REFRESH, because SKIP is not a reserved word. To
resolve that, fold the refresh choice into the WITH options. Refreshing
is the default now.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Otherwise code that uses this will abort with an assertion failure,
because postmaster_alive_fds are not initialized.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
The current method of computing the record length (excluding the
lenght of full-page images) has been wrong since the WAL format has
been revamped in 2c03216d83. Only the
main record's length was counted, but that can be significantly too
little if there's data associated with further blocks.
Fix by computing the record length as total_lenght - fpi_length.
Reported-By: Chen Huajun
Bug: #14687
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20170603165939.1436.58887@wrigleys.postgresql.org
Backpatch: 9.5-
Declare the toc_nentry field as uint32 not Size. Since shm_toc_lookup()
reads the field without any lock, it has to be atomically readable, and
we do not assume that for fields wider than 32 bits. Performance would
be impossibly bad for entry counts approaching 2^32 anyway, so there is
no need to try to preserve maximum width here.
This is probably an academic issue, because even if reading int64 isn't
atomic, the high order half would never change in practice. Still, it's
a coding rule violation, so let's fix it.
Adjust some other not-terribly-well-chosen data types too, and copy-edit
some comments. Make shm_toc_attach's Asserts consistent with
shm_toc_create's.
None of this looks to be a live bug, so no need for back-patch.
Discussion: https://postgr.es/m/16984.1496679541@sss.pgh.pa.us
Some openssl builds put their lib files in a VC subdirectory, others do
not. Cater for both cases.
Backpatch to all live branches.
From an offline discussion with Leonardo Cecchi.
Given the possibility of race conditions and so on, it seems entirely
unsafe to just assume that shm_toc_lookup() always finds the key it's
looking for --- but that was exactly what all but one call site were
doing. To fix, add a "bool noError" argument, similarly to what we
have in many other functions, and throw an error on an unexpected
lookup failure. Remove now-redundant Asserts that a rather random
subset of call sites had.
I doubt this will throw any light on buildfarm member lorikeet's
recent failures, because if an unnoticed lookup failure were involved,
you'd kind of expect a null-pointer-dereference crash rather than the
observed symptom. But you never know ... and this is better coding
practice even if it never catches anything.
Discussion: https://postgr.es/m/9697.1496675981@sss.pgh.pa.us
get_partition_parent felt that it could simply Assert that systable_getnext
found a tuple. This is unlike any other caller of that function, and it's
unsafe IMO --- in fact, the reason I noticed it was that the Assert failed.
(OK, I was working with known-inconsistent catalog contents, but I wasn't
expecting the DB to fall over quite that violently. The behavior in a
non-assert-enabled build wouldn't be very nice, either.) Fix it to do what
other callers do, namely an actual runtime-test-and-elog.
Also, standardize the wording of elog messages that are complaining about
unexpected failure of systable_getnext. 90% of them say "could not find
tuple for <object>", so make the remainder do likewise. Many of the
holdouts were using the phrasing "cache lookup failed", which is outright
misleading since no catcache search is involved.
I'd always assumed that backend/optimizer/geqo/'s remarkably poor
showing on code coverage metrics was because we weren't exercising
it much in the regression tests. But it turns out that a good chunk
of the problem is that there's a bunch of code that is physically
unreachable (because the calls to it are #ifdef'd out in geqo_main.c)
but is being built anyway. Making the called code have #if guards
similar to the calling code saves a couple of kilobytes of executable
size and should make the coverage numbers more reflective of reality.
It's arguable that we should just delete all the unused recombination
mechanisms altogether, but I didn't feel a need to go that far today.
If we allow this, whatever outer command has the table open will not know
about the new index and may fail to update it as needed, as shown in a
report from Laurenz Albe. We already had such a prohibition in place for
ALTER TABLE, but the CREATE INDEX syntax missed the check.
Fixing it requires an API change for DefineIndex(), which conceivably
would break third-party extensions if we were to back-patch it. Given
how long this problem has existed without being noticed, fixing it in
the back branches doesn't seem worth that risk.
Discussion: https://postgr.es/m/A737B7A37273E048B164557ADEF4A58B53A4DC9A@ntex2010i.host.magwien.gv.at
\if and related commands were overlooked here, as were \dRp and \dRs
from the logical-replication patch, as was \?.
While here, reformat the list to put each new first command letter on
a separate line; perhaps that will limit the need to reflow the whole
list when we add more commands in future.
Masahiko Sawada (reformatting by me)
Discussion: https://postgr.es/m/CAD21AoDW1QHtBsM33hV+Fg2mYEs+FWj4qtoCU72AwHAXQ3U6ZQ@mail.gmail.com
These estimators returned 1 minus the corresponding equality/match
estimate, which is incorrect: we need to subtract off the fraction
of nulls in the column, since those are neither equal nor not equal
to the comparison value. The error only becomes obvious if the
nullfrac is large, but it could be very bad in a mostly-nulls
column, as reported in bug #14676 from Marko Tiikkaja.
To fix the <> case, refactor eqsel() and neqsel() to call a common
support routine, which can be made to account for nullfrac correctly.
The pattern-match cases were already factored that way, and it was
simply an oversight that patternsel() wasn't subtracting off nullfrac.
neqjoinsel() has a similar problem, but since we're elsewhere discussing
changing its behavior entirely, I left it alone for now.
This is a very longstanding bug, but I'm hesitant to back-patch a fix for
it. Given the lack of prior complaints, such cases must not come up often,
so it's probably not worth the risk of destabilizing plans in stable
branches.
Discussion: https://postgr.es/m/20170529153847.4275.95416@wrigleys.postgresql.org
When costing a nestloop with stop-at-first-inner-match semantics, and a
non-indexscan inner path, final_cost_nestloop() wants to charge the full
scan cost of the inner rel at least once, with additional scans charged
at inner_rescan_run_cost which might be less. However the logic for
doing this effectively assumed that outer_matched_rows is at least 1.
If it's zero, which is not unlikely for a small outer rel, we ended up
charging inner_run_cost plus N times inner_rescan_run_cost, as much as
double the correct charge for an outer rel with only one row that
we're betting won't be matched. (Unless the inner rel is materialized,
in which case it has very small inner_rescan_run_cost and the cost
is not so far off what it should have been.)
The upshot of this was that the planner had a tendency to select plans
that failed to make effective use of the stop-at-first-inner-match
semantics, and that might have Materialize nodes in them even when the
predicted number of executions of the Materialize subplan was only 1.
This was not so obvious before commit 9c7f5229a, because the case only
arose in connection with semi/anti joins where there's not freedom to
reverse the join order. But with the addition of unique-inner joins,
it could result in some fairly bad planning choices, as reported by
Teodor Sigaev. Indeed, some of the test cases added by that commit
have plans that look dubious on closer inspection, and are changed
by this patch.
Fix the logic to ensure that we don't charge for too many inner scans.
I chose to adjust it so that the full-freight scan cost is associated
with an unmatched outer row if possible, not a matched one, since that
seems like a better model of what would happen at runtime.
This is a longstanding bug, but given the lesser impact in back branches,
and the lack of field complaints, I won't risk a back-patch.
Discussion: https://postgr.es/m/CAKJS1f-LzkUsFxdJ_-Luy38orQ+AdEXM5o+vANR+-pHAWPSecg@mail.gmail.com
We didn't accept any invalidation messages until the whole sync process
had finished (because it flattens all the remote transactions in the
single one). So the sync worker didn't learn about subscription
changes/drop until it has finished. This could lead to "orphaned" sync
workers.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
This avoids "orphaned" sync workers.
This was caused by a thinko in wait_for_sync_status_change.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
Previously this was not allowed, as copy.c didn't set the
CURSOR_OPT_PARALLEL_OK flag when planning the query. Set it.
While the lack of parallel query for COPY isn't strictly speaking a
bug, it does prevent parallelism from being used in a facility
commonly used to run long running queries. Thus backpatch to 9.6.
Author: Andres Freund
Discussion: https://postgr.es/m/20170531231958.ihanapplorptykzm@alap3.anarazel.de
Backpatch: 9.6, where parallelism was introduced.
When trying to access a replication slot that is supposed to already
exist, we don't need to check the naming rules again. If the slot
does not exist, we will then get a "does not exist" error message, which
is generally more useful from the perspective of an end user.
The logical replication worker processes now use the normal die()
handler for SIGTERM and CHECK_FOR_INTERRUPTS() instead of custom code.
One problem before was that the apply worker would not exit promptly
when a subscription was dropped, which could lead to deadlocks.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
Move the walrcv_disconnect() calls into the before_shmem_exit handler.
This makes sure the call is always made even during exit by signal, it
saves some duplicate code, and it makes the logic more similar to
walreceiver.c.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
If a FOR ALL TABLES publication was present, \d of a table would claim
for each table that it was part of the publication, even for tables that
are ignored for this purpose, such as system tables and unlogged tables.
Fix the query by using the function pg_get_publication_tables(), which
was intended for this purpose.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Previously the changes to the "data" part of the sequence, i.e. the
one containing the current value, were not transactional, whereas the
definition, including minimum and maximum value were. That leads to
odd behaviour if a schema change is rolled back, with the potential
that out-of-bound sequence values can be returned.
To avoid the issue create a new relfilenode fork whenever ALTER
SEQUENCE is executed, similar to how TRUNCATE ... RESTART IDENTITY
already is already handled.
This commit also makes ALTER SEQUENCE RESTART transactional, as it
seems to be too confusing to have some forms of ALTER SEQUENCE behave
transactionally, some forms not. This way setval() and nextval() are
not transactional, but DDL is, which seems to make sense.
This commit also rolls back parts of the changes made in 3d092fe540
and f8dc1985f as they're now not needed anymore.
Author: Andres Freund
Discussion: https://postgr.es/m/20170522154227.nvafbsm62sjpbxvd@alap3.anarazel.de
Backpatch: Bug is in master/v10 only
On some platforms, -fpic fails for sufficiently large shared libraries.
We've mostly not hit that boundary yet, but there are some extensions
such as Citus and pglogical where it's becoming a problem. A bit of
research suggests that the penalty for -fPIC is small, in the
single-digit-percentage range --- and there's none at all on popular
platforms such as x86_64. So let's just default to -fPIC everywhere
and provide one less thing for extension developers to worry about.
Per complaint from Christoph Berg. Back-patch to all supported branches.
(I did not bother to touch the recently-removed Makefiles for sco and
unixware in the back branches, though. We'd have no way to test that
it doesn't break anything on those platforms.)
Discussion: https://postgr.es/m/20170529155850.qojdfrwkkqnjb3ap@msg.df7cb.de
Using the client pid can easily be non-unique when used on different
hosts. Using the backend pid should be guaranteed unique, since the
temporary slot gets removed when the client disconnects so it will be
gone even if the pid is renewed.
Reported by Ludovic Vaugeois-Pepin
The GET/SET_n_BYTES macros are meant to be infrastructure for the
DatumGetFoo/FooGetDatum macros, which include a cast to the intended
target type. Using them directly without a cast, as DatumGetFloat4
and friends previously did, can yield warnings when -Wconversion is on.
This is of little significance when building Postgres proper, because
there are such a huge number of such warnings in the server that nobody
would think -Wconversion is of any use. But some extensions build with
-Wconversion due to outside constraints. Commit 14cca1bf8 did a disservice
to those extensions by moving DatumGetFloat4 et al into postgres.h,
where they can now cause warnings in extension builds.
To fix, use DatumGetInt32 and friends in place of the low-level macros.
This is arguably a bit cleaner anyway.
Chapman Flack
Discussion: https://postgr.es/m/592E4D04.1070609@anastigmatix.net
Remove some gratuituous message differences by making the AM name
previously embedded in each message be a %s instead. While at it, get
rid of terminology that's unclear and unnecessary in one message.
Discussion: https://postgr.es/m/20170523001557.bq2hbq7hxyvyw62q@alvherre.pgsql
We could have limped along without this for v10, which was my intention
when I annotated the bug in commit 76a3df6e5. But consensus is that it's
better to fix it now and take the cost of a post-beta1 initdb (which is
needed because these node types are stored in pg_class.relpartbound).
Since we're forcing initdb anyway, take the opportunity to make the node
type identification strings match the node struct names, instead of being
randomly different from them.
Discussion: https://postgr.es/m/E1dFBEX-0004wt-8t@gemulon.postgresql.org
Per our message style guidelines, error messages incorporating the
results of format_type_be() and its siblings should not add quotes
around those results, because those functions already add quotes
at need. Fix a few places that hadn't gotten that memo.
json_populate_record throws an error if asked to convert a JSON scalar
or array into a composite type. jsonb_populate_record was returning
a record full of NULL fields instead. It seems better to make it
throw an error for this case as well.
Nikita Glukhov
Discussion: https://postgr.es/m/fbd1d566-bba0-a3de-d6d0-d3b1d7c24ff2@postgrespro.ru
The macro gave the wrong answers for a JsObject with is_json == 0:
it would return 1 if jsonb_cont == NULL, or if that wasn't NULL,
it would return 1 for any non-zero size.
We could fix that, but the only use of this macro at present is in the
JsObjectIsEmpty() macro, so it seems simpler and clearer to get rid of
JsObjectSize() and put corrected logic into JsObjectIsEmpty().
Thinko in commit cf35346e8, so no need for back-patch.
Nikita Glukhov
Discussion: https://postgr.es/m/fbd1d566-bba0-a3de-d6d0-d3b1d7c24ff2@postgrespro.ru
pg_resetwal (formerly pg_resetxlog) doesn't insist on finding a matching
version number in pg_control, and that seems like an important thing to
preserve since recovering from corrupt pg_control is a prime reason to
need to run it. However, that means you can try to run it against a
data directory of a different major version, which is at best useless
and at worst disastrous. So as to provide some protection against that
type of pilot error, inspect PG_VERSION at startup and refuse to do
anything if it doesn't match. PG_VERSION is read-only after initdb,
so it's unlikely to get corrupted, and even if it were corrupted it would
be easy to fix by hand.
This hazard has been there all along, so back-patch to all supported
branches.
Michael Paquier, with some kibitzing by me
Discussion: https://postgr.es/m/f4b8eb91-b934-8a0d-b3cc-68f06e2279d1@enterprisedb.com
The NumericOnly grammar production accepted ICONST, + ICONST, - ICONST,
FCONST, and - FCONST, but for some reason not + FCONST. This led to
strange inconsistencies like
regression=# set random_page_cost = +4;
SET
regression=# set random_page_cost = 4000000000;
SET
regression=# set random_page_cost = +4000000000;
ERROR: syntax error at or near "4000000000"
(because 4000000000 is too large to be an ICONST). While there's
no actual functional reason to need to write a "+", if we allow
it for integers it seems like we should allow it for numerics too.
It's been like that forever, so back-patch to all supported branches.
Discussion: https://postgr.es/m/30908.1496006184@sss.pgh.pa.us
Avoid trashing the input PartitionBoundSpec; while that might be safe for
current callers, it's certainly trouble waiting to happen. In the same
vein, make sure that all of the result data structure is freshly palloc'd,
rather than some of it being pointers into the input data structures
(which we don't know the lifespans of).
Simplify the logic for tacking on IS NULL or IS NOT NULL conditions some
more; commit 85c2b9a15 left a lot on the table there. And rearrange the
construction of the nodes into (what seems to me) a more logical order.
In passing, make sure that get_qual_for_range() also returns a freshly
palloc'd structure, since there's no value in having that guarantee for
only one kind of partitioning. And improve some comments there.
Jeevan Ladhe, with further tweaking by me
Discussion: https://postgr.es/m/CAOgcT0MAcYoMs93W80iTUf_dP36=1mZQzeUk+nnwY_-qWDrCfw@mail.gmail.com
Fix failure to check that we got a plain Const from const-simplification of
a coercion request. This is the cause of bug #14666 from Tian Bing: there
is an int4 to money cast, but it's only stable not immutable (because of
dependence on lc_monetary), resulting in a FuncExpr that the code was
miserably unequipped to deal with, or indeed even to notice that it was
failing to deal with. Add test cases around this coercion behavior.
In view of the above, sprinkle the code liberally with castNode() macros,
in hope of catching the next such bug a bit sooner. Also, change some
functions that were randomly declared to take Node* to take more specific
pointer types. And change some struct fields that were declared Node*
but could be given more specific types, allowing removal of assorted
explicit casts.
Place PARTITION_MAX_KEYS check a bit closer to the code it's protecting.
Likewise check only-one-key-for-list-partitioning restriction in a less
random place.
Avoid not-per-project-style usages like !strcmp(...).
Fix assorted failures to avoid scribbling on the input of parse
transformation. I'm not sure how necessary this is, but it's entirely
silly for these functions to be expending cycles to avoid that and not
getting it right.
Add guards against partitioning on system columns.
Put backend/nodes/ support code into an order that matches handling
of these node types elsewhere.
Annotate the fact that somebody added location fields to PartitionBoundSpec
and PartitionRangeDatum but forgot to handle them in
outfuncs.c/readfuncs.c. This is fairly harmless for production purposes
(since readfuncs.c would just substitute -1 anyway) but it's still bogus.
It's not worth forcing a post-beta1 initdb just to fix this, but if we
have another reason to force initdb before 10.0, we should go back and
clean this up.
Contrariwise, somebody added location fields to PartitionElem and
PartitionSpec but forgot to teach exprLocation() about them.
Consolidate duplicative code in transformPartitionBound().
Improve a couple of error messages.
Improve assorted commentary.
Re-pgindent the files touched by this patch; this affects a few comment
blocks that must have been added quite recently.
Report: https://postgr.es/m/20170524024550.29935.14396@wrigleys.postgresql.org
Use 'COLLATE "C"' to force locale-independent sorting of the iexit
view results in select_views.sql. We aren't particularly interested
in the exact sorting behavior here, and this doesn't change the shape
of the generated plan, so it seems like a wash as far as the goals
of this test go.
This is in response to bug #14637 from Tomasz Kontusz. It doesn't
fully resolve his problem, because he also saw some diffs in the
create_index test. But other people have had issues with select_views
too, and this fix lets us drop the select_views_1.out variant expected
file altogether, which is a nice win from a maintenance standpoint.
Emre Hasegeli
Discussion: https://postgr.es/m/20170501000609.24360.24248@wrigleys.postgresql.org
Dunno what 'p' was supposed to mean, but since neither the code below
here nor pg_collation.h think it's valid, it must be a mistake.
Per report from Thomas Kellerer.
Discussion: https://postgr.es/m/og9q8f%24oes%241%40blaine.gmane.org
Commit 9aa3c782c added code to allow CREATE TABLE/CREATE TYPE to not fail
when the desired type name conflicts with an autogenerated array type, by
dint of renaming the array type out of the way. But I (tgl) overlooked
that the same case arises in ALTER TABLE/TYPE RENAME. Fix that too.
Back-patch to all supported branches.
Report and patch by Vik Fearing, modified a bit by me
Discussion: https://postgr.es/m/0f4ade49-4f0b-a9a3-c120-7589f01d1eb8@2ndquadrant.com
If an operator class has no operators or functions, and doesn't need
a STORAGE clause, we emitted "CREATE OPERATOR CLASS ... AS ;" which
is syntactically invalid. Fix by forcing a STORAGE clause to be
emitted anyway in this case.
(At some point we might consider changing the grammar to allow CREATE
OPERATOR CLASS without an opclass_item_list. But probably we'd want to
omit the AS in that case, so that wouldn't fix this pg_dump issue anyway.)
It's been like this all along, so back-patch to all supported branches.
Daniel Gustafsson, tweaked by me to avoid a dangling-pointer bug
Discussion: https://postgr.es/m/D9E5FC64-7A37-4F3D-B946-7E4FB468F88A@yesql.se
Logical replication supports replicating between tables with different
column order. But this failed for the initial table sync because of a
logic error in how the column list for the internal COPY command was
composed. Fix that and also add a test.
Also fix a minor omission in the column name mapping cache. When
creating the mapping list, it would not skip locally dropped columns.
So if a remote column had the same name as a locally dropped
column (...pg.dropped...), then the expected error would not occur.
Reduce some redundant messages to DEBUG1. Be clearer about the
distinction between apply workers and table synchronization workers.
Add subscription and table name where possible.
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
We need not consider the case where both nulltest1 and nulltest2 are
NULL; the partition either accepts nulls or it does not.
Jeevan Ladhe. I added an assertion.
This patch replaces isspace() calls with scanner_isspace() in functions
that are likely to be presented with non-ASCII input. isspace() has
the small advantage that it will correctly recognize no-break space
in single-byte encodings (such as LATIN1); but it cannot work successfully
for any multibyte character, and depending on platform it might return
false positive results for some fragments of multibyte characters. That's
disastrous for functions that are trying to discard whitespace between
valid strings, as noted in bug #14662 from Justin Muise. Even treating
no-break space as whitespace is pretty questionable for the usages touched
here, because the core scanner would think it is an identifier character.
Affected functions are parse_ident(), parseNameAndArgTypes (underlying
regprocedurein() and siblings), SplitIdentifierString (used for parsing
GUCs and options that are qualified names or lists of names), and
SplitDirectoriesString (used for parsing GUCs that are lists of
directories).
All the functions adjusted here are parsing SQL identifiers and similar
constructs, so it's reasonable to insist that their definition of
whitespace match the core scanner. So we can hope that this won't cause
many backwards-compatibility problems. I've left alone isspace() calls
in places that aren't really expecting any non-ASCII input characters,
such as float8in().
Back-patch to all supported branches.
Discussion: https://postgr.es/m/10129.1495302480@sss.pgh.pa.us
The nonce consists of client and server nonces concatenated together. The
client checks the nonce contained the client nonce, but it would get fooled
if the server sent a truncated or even empty nonce.
Reported by Steven Fackler to security@postgresql.org. Neither me or Steven
are sure what harm a malicious server could do with this, but let's fix it.
The cash_div_intX functions applied rint() to the result of the division.
That's not merely useless (because the result is already an integer) but
it causes precision loss for values larger than 2^52 or so, because of
the forced conversion to float8.
On the other hand, the cash_mul_fltX functions neglected to apply rint() to
their multiplication results, thus possibly causing off-by-one outputs.
Per C standard, arithmetic between any integral value and a float value is
performed in float format. Thus, cash_mul_flt4 and cash_div_flt4 produced
answers good to only about six digits, even when the float value is exact.
We can improve matters noticeably by widening the float inputs to double.
(It's tempting to consider using "long double" arithmetic if available,
but that's probably too much of a stretch for a back-patched fix.)
Also, document that cash_div_intX operators truncate rather than round.
Per bug #14663 from Richard Pistole. Back-patch to all supported branches.
Discussion: https://postgr.es/m/22403.1495223615@sss.pgh.pa.us
Using flex's -i switch to achieve case-insensitivity is not a very safe
practice, because the scanner's behavior may then depend on the locale
that flex was invoked in. In the particular example at hand, that's
not academic: the possible matches for "FIRST" will be different in a
Turkish locale than elsewhere. Do it the hard way instead, as our
other scanners do.
Also, drop use of -b -CF -p, because this scanner is only used when
parsing the contents of a GUC variable. That's not done often, and
the amount of text to be parsed can be expected to be trivial, so
prioritizing scanner speed over code size seems like quite the wrong
tradeoff. Using flex's default optimization options reduces the
size of syncrep_gram.o by more than 50%.
The case-insensitivity problem is new in HEAD (cf commit 3901fd70c).
The poor choice of optimization flags exists also in 9.6, but it doesn't
seem important enough to back-patch.
Discussion: https://postgr.es/m/24403.1495225931@sss.pgh.pa.us
Mark any old hash indexes as invalid so that they don't get used, and
create a script to run REINDEX on all of them. Without this, we'd
still try to use any upgraded hash indexes, but it would fail.
Amit Kapila, reviewed by me. Per a suggestion from Tom Lane.
Discussion: http://postgr.es/m/CAA4eK1Jidtagm7Q81q-WoegOVgkotv0OxvHOjFxcvFRP4X=mSw@mail.gmail.com
If one host in a multi-host connection string times out, move on to
the next specified host instead of giving up entirely.
Takayuki Tsunakawa, reviewed by Michael Paquier. I added
a minor adjustment to the documentation.
Discussion: http://postgr.es/m/0A3221C70F24FB45833433255569204D1F6F42F5@G01JPEXMBYT05
Otherwise, set_plan_refs() can get applied to the same list
multiple times through different references, leading to chaos.
Amit Langote, Dilip Kumar, and Robert Haas, reviewed by Ashutosh
Bapat. Original report by Sveinn Sveinsson.
Discussion: http://postgr.es/m/20170517141151.1435.79890@wrigleys.postgresql.org
Since commit e7b3349a8a, MergeAttributes
destructively modifies the input List, to which the caller's
CreateStmt still points. One may wonder whether this was already a
bug, but commit f0e44751d7 made things
noticeably worse by adding additional destructive modifications so
that the caller's List might, in the case of creation a partitioned
table, no longer even be structurally valid. Restore the status quo
ante by assigning the return value of MergeAttributes back to
stmt->tableElts in the caller.
In most of the places where DefineRelation is called, it doesn't
matter what stmt->tableElts points to here or whether it's valid or
not, because the caller doesn't use the statement for anything after
DefineRelation returns anyway. However, ProcessUtilitySlow passes it
to EventTriggerCollectSimpleCommand, and that function tries to invoke
copyObject on it. If any of the CreateStmt's substructure is invalid
at that point, undefined behavior will result.
One might wonder whether this whole area needs further revision -
perhaps DefineRelation() ought not to be destructively modifying the
caller-provided CreateStmt at all. However, that would be a behavior
change for any event triggers using C code to inspect the CreateStmt,
so for now, just fix the crash.
Report by Amit Langote, who provided a somewhat different patch for it.
Discussion: http://postgr.es/m/bf6a39a7-100a-74bd-1156-3c16a1429d88@lab.ntt.co.jp
This seemed like a good idea originally because there's no way to mark
a range partition as accepting NULL, but that now seems more like a
current limitation than something we want to lock down for all time.
For example, there's a proposal to add the notion of a default
partition which accepts all rows not otherwise routed, which directly
conflicts with the idea that a range-partitioned table should never
allow nulls anywhere. So let's change this while we still can, by
putting the NOT NULL test into the partition constraint instead of
changing the column properties.
Amit Langote and Robert Haas, reviewed by Amit Kapila
Discussion: http://postgr.es/m/8e2dd63d-c6fb-bb74-3c2b-ed6d63629c9d@lab.ntt.co.jp
When creating a subscription with slot_name = NONE, we failed to check
that also create_slot = false and enabled = false were set. This
created an invalid subscription and could later lead to a crash if a
NULL slot name was accessed. Add more checks around that for
robustness.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Partially revert commit c079673dcb.
There were complaints that splitting switch descriptions would
complicate translation efforts. There are probably ways to resolve
the formatting problem without doing that, but undo it while we're
discussing.
Add some tests for parsing different option combinations. Fix some of
the resulting error messages for recent changes in option naming.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
When stdin is a terminal, it's possible to end a COPY FROM STDIN with
a keyboard EOF signal (typically control-D), and then keep on issuing
SQL commands. One would expect another COPY FROM STDIN to work as well,
but on some platforms it did not. This turns out to be because we were
not resetting the stream's feof() flag, and BSD-ish versions of fread()
and fgets() won't attempt to read more data if that's set.
The misbehavior is observed on BSDen (including macOS), but not Linux,
Windows, or SysV-ish Unixen, which makes this a portability bug not
just a missing feature.
Add a clearerr() call to fix the behavior, and improve the prompt that's
issued when copying from a TTY to mention that EOF signals work.
It's been like this forever, so back-patch to all supported branches.
Thomas Munro
Discussion: https://postgr.es/m/CAEepm=0MCGfYf=JAMiYhO6JPtv9-3ZfBo8fcGeCZ8oMzaw+Z+Q@mail.gmail.com
We used to only check for a supported relkind on the subscriber during
replication, which is needed to ensure that the setup is valid and we
don't crash. But it's also useful to tell the user immediately when
CREATE or ALTER SUBSCRIPTION is executed that the relation being added
to the subscription is not of a supported relkind.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
Commit 827d6f977 contained the same misunderstanding of hash_create's API
as commit 090010f2e. As in 5d00b764c, remove the unnecessary layer of
memory context. (This bug is less significant than the other one, since
the extra context would be under a relatively short-lived context, but
it's still a bug.)
Since commit 4e37b3e15, buildfarm member frogmouth has been failing
occasionally with symptoms indicating that some expected stats data is
getting dropped. The reason that that commit changed the behavior seems
probably to be that more data is getting shoved at the collector in a short
span of time. In current sources, the stats test's first session sends
about 9KB of data while exiting, which is probably the same as what was
sent just before wait_for_stats() in the previous test design. But now,
the test's second session is starting up concurrently, and it sends another
2KB (presumably reflecting its initial catalog accesses). Since frogmouth
is running on Windows XP, which reputedly has a default socket receive
buffer size of only 8KB, it is not very surprising if this has put us over
the threshold where the receive buffer can overflow and drop messages.
The same mechanism could very easily explain the intermittent stats test
failures we've been seeing for years, since background processes such
as the bgwriter will sometimes send data concurrently with all this, and
could thus cause occasional buffer overflows.
Hence, insert some code into pgstat_init() to increase the stats socket's
receive buffer size to 100KB if it's less than that. (On failure, emit a
LOG message, but keep going.) Modern systems seem to have default sizes
in the range of 100KB-250KB, but older platforms don't. I couldn't find
any platforms that wouldn't accept 100KB, so in theory this won't cause
any portability problems.
If this is successful at reducing the buildfarm failure rate in HEAD,
we should back-patch it, because it's certain that similar buffer overflows
happen in the field on platforms with small buffer sizes. Going forward,
there might be an argument for trying to increase the buffer size even
more, but let's take a baby step first.
Discussion: https://postgr.es/m/22173.1494788088@sss.pgh.pa.us
Modifying the permissions of a persistent file isn't really much nicer
than modifying its contents, even if git doesn't currently notice it.
Adjust the test script to make a copy and set the permissions of that
instead.
Michael Paquier, per a gripe from me. Back-patch to 9.5 where these
tests were introduced.
Discussion: https://postgr.es/m/14836.1494885946@sss.pgh.pa.us
The CommentStmt made by RebuildConstraintComment() has to pstrdup the
relation name, else it will contain a dangling pointer after that
relcache entry is flushed. (I'm less sure that pstrdup'ing conname
is necessary, but let's be safe.) Failure to do this leads to weird
errors or crashes, as reported by Marko Elezovic.
Bug introduced by commit e42375fc8, so back-patch to 9.5 as that was.
Fix by David Rowley, regression test by Michael Paquier
Discussion: https://postgr.es/m/DB6PR03MB30775D58E732D4EB0C13725B9AE00@DB6PR03MB3077.eurprd03.prod.outlook.com
In 1753b1b027, the pg_sequence system
catalog was introduced. This made sequence metadata changes
transactional, while the actual sequence values are still behaving
nontransactionally. This requires some refinement in how ALTER
SEQUENCE, which operates on both, locks the sequence and the catalog.
The main problems were:
- Concurrent ALTER SEQUENCE causes "tuple concurrently updated" error,
caused by updates to pg_sequence catalog.
- Sequence WAL writes and catalog updates are not protected by same
lock, which could lead to inconsistent recovery order.
- nextval() disregarding uncommitted ALTER SEQUENCE changes.
To fix, nextval() and friends now lock the sequence using
RowExclusiveLock instead of AccessShareLock. ALTER SEQUENCE locks the
sequence using ShareRowExclusiveLock. This means that nextval() and
ALTER SEQUENCE block each other, and ALTER SEQUENCE on the same sequence
blocks itself. (This was already the case previously for the OWNER TO,
RENAME, and SET SCHEMA variants.) Also, rearrange some code so that the
entire AlterSequence is protected by the lock on the sequence.
As an exception, use reduced locking for ALTER SEQUENCE ... RESTART.
Since that is basically a setval(), it does not require the full locking
of other ALTER SEQUENCE actions. So check whether we are only running a
RESTART and run with less locking if so.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Jason Petersen <jason@citusdata.com>
Reported-by: Andres Freund <andres@anarazel.de>
pg_stat_get_snapshot_timestamp() returns the timestamp seen in the "global"
stats file. Because pgstat_write_statsfiles() writes per-DB stats files
before the global file (or at least before renaming it into place), there
is a window where the test backend can see all the stats updates that
wait_for_stats() was checking for (all of which come from the per-DB file)
but also see the same global stats file it had seen at the start of the
test script. This results in a failure in only the "snapshot_newer" query,
as reported by a couple of buildfarm members recently.
I suspect that this ought to be back-patched. Commit 4e37b3e15 has
evidently increased the probability of this window getting hit, but
it's not apparent why it could not have been hit before. I'll refrain
for the moment though.
Code review for commit 090010f2e.
Fix cases where an elog(ERROR) partway through a function would leave the
persistent data structures in a corrupt state. pgstat_report_stat got this
wrong by invalidating PgStat_TableEntry structs before removing hashtable
entries pointing to them, and get_tabstat_entry got it wrong by ignoring
the possibility of palloc failure after it had already created a hashtable
entry.
Also, avoid leaking a memory context per transaction, which the previous
code did through misunderstanding hash_create's API. We do not need to
create a context to hold the hash table; hash_create will do that.
(The leak wasn't that large, amounting to only a memory context header
per iteration, but it's still surprising that nobody noticed it yet.)
Commit 60690a6fe attempted to fix the wait_for_stats() function in this
test so that it would wait properly if the tenk2 scans were done in
parallel workers instead of the main session (typically as a consequence of
force_parallel_mode being turned on). However, we made it test for whether
the main session's actions had been reported by looking for inserts on
'trunc_stats_test'. This is the Wrong Thing, because those aren't the last
updates we expect the main session to do. As shown by recent failures on
buildfarm member frogmouth, it's entirely likely that the trunc_stats_test
updates will be reported in a separate message from later updates, which
means there can be a window in which wait_for_stats() will exit but not all
the updates we are expecting to see will have arrived. We should test for
the last updates we're expecting, namely those on 'trunc_stats_test4'.
Unfortunately, I doubt that this explains frogmouth's failures, because
there's no reason to believe that it's running the tenk2 queries in
parallel. Still, the test is wrong on its own terms, so fix and back-patch
to 9.6 where parallel query came in.
Per a report from Tom Lane, newer versions of gcc apparently think
that partexprs_item_saved can be used uninitialized. Try to convince
them otherwise.
Remove default cases from assorted switches over ObjectClass and some
related enum types, so that we'll get compiler warnings when someone
adds a new enum value without accounting for it in all these places.
In passing, re-order some switch cases as needed to match the declaration
of enum ObjectClass. OK, that's just neatnik-ism, but I dislike code
that looks like it was assembled with the help of a dartboard.
Discussion: https://postgr.es/m/20170512221010.nglatgt5azzdxjlj@alvherre.pgsql
ALTER COLUMN TYPE on a column used by a statistics object fails since
commit 928c4de30, because the relevant switch in ATExecAlterColumnType
is unprepared for columns to have dependencies from OCLASS_STATISTIC_EXT
objects.
Although the existing types of extended statistics don't actually need us
to do any work for a column type change, it seems completely indefensible
that that assumption is hidden behind the failure of an unrelated module
to contain any code for the case. Hence, create and call an API function
in statscmds.c where the assumption can be explained, and where we could
add code to deal with the problem when it inevitably becomes real.
Also, the reason this wasn't handled before, neither for extended stats
nor for the last half-dozen new OCLASS kinds :-(, is that the default:
in that switch suppresses compiler warnings, allowing people to miss the
need to consider it when adding an OCLASS. We don't really need a default
because surely getObjectClass should only return valid values of the enum;
so remove it, and add the missed OCLASS entries where they should be.
Discussion: https://postgr.es/m/20170512221010.nglatgt5azzdxjlj@alvherre.pgsql
Consistently refer to such an entry as a "statistics object", not just
"statistics" or "extended statistics". Previously we had a mismash of
terms, accompanied by utter confusion as to whether the term was
singular or plural. That's not only grating (at least to the ear of
a native English speaker) but could be outright misleading, eg in error
messages that seemed to be referring to multiple objects where only one
could be meant.
This commit fixes the code and a lot of comments (though I may have
missed a few). I also renamed two new SQL functions,
pg_get_statisticsextdef -> pg_get_statisticsobjdef
pg_statistic_ext_is_visible -> pg_statistics_obj_is_visible
to conform better with this terminology.
I have not touched the SGML docs other than fixing those function
names; the docs certainly need work but it seems like a separable task.
Discussion: https://postgr.es/m/22676.1494557205@sss.pgh.pa.us
Before 955a684e04 logical decoding snapshot maintenance needed to
cope with transactions it might not have seen in their entirety. For
such transactions we'd to assume they modified the catalog (could have
happened before we were watching), and thus a new snapshot had to be
built, and distributed to concurrently running transactions.
That's problematic because building a new snapshot isn't that cheap ,
especially as the the array of committed transactions needs to be
sorted. When creating a slot on a server with a lot of transactions,
this could make logical slot creation infeasibly expensive.
After 955a684e04 there's no need to deal with transaction that
aren't guaranteed to be fully observable. That allows to avoid
building snapshots for transactions that haven't modified catalog,
even before reaching consistency.
While this isn't necessarily a bugfix, slot creation being impossible
in some production workloads, is severe enough to warrant
backpatching.
Author: Andres Freund, based on a quite different patch from Petr Jelinek
Analyzed-By: Petr Jelinek
Reviewed-By: Petr Jelinek
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backpatch: 9.4-, where logical decoding has been introduced
The snapshot assembly during the creation of logical slots relied
waiting for transactions in xl_running_xacts to end, by checking for
their commit/abort records. Unfortunately, despite locking, it is
possible to see an xl_running_xact record listing transactions as
ready, that have already WAL-logged an commit/abort record, as the
locking just prevents the ProcArray to be adjusted, and the commit
record has to be logged first.
That lead to either delayed or hanging snapshot creation, because
snapbuild.c would wait "forever" to see commit/abort records for some
transactions. That hang resolved only if a xl_running_xacts record
without any running transactions happened to be logged, far from
certain on a busy server.
It's impractical to prevent that via more heavyweight locking, the
likelihood of deadlocks and significantly increased contention would
be too big.
Instead change the initial snapshot creation to be solely based on
tracking the oldest running transaction via
xl_running_xacts->oldestRunningXid - that actually ends up
significantly simplifying the code. That has two disadvantages:
1) Because we cannot fully "trust" the contents of xl_running_xacts,
we cannot use it to build the initial snapshot. Instead we have to
wait twice for all running transactions to finish.
2) Previously a slot, unless the race occurred, could be created when
the all transaction perceived as running based on commit/abort
records, now we have to wait for the next xl_running_xacts record.
To address that, trigger logging new xl_running_xacts record from
within snapbuild.c exactly when necessary.
Unfortunately snabuild.c's SnapBuild is stored on disk, one of the
stupider ideas of a certain Mr Freund, so we can't change it in a
minor release. As this is going to be backpatched, we have to hack
around a bit to keep on-disk compatibility. A later commit will
rejigger that on master.
Author: Andres Freund, based on a quite different patch from Petr Jelinek
Analyzed-By: Petr Jelinek
Reviewed-By: Petr Jelinek
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backpatch: 9.4-, where logical decoding has been introduced
The mess cleaned up in commit da0759600 is clear evidence that it's a
bug hazard to expect the caller of get_attstatsslot()/free_attstatsslot()
to provide the correct type OID for the array elements in the slot.
Moreover, we weren't even getting any performance benefit from that,
since get_attstatsslot() was extracting the real type OID from the array
anyway. So we ought to get rid of that requirement; indeed, it would
make more sense for get_attstatsslot() to pass back the type OID it found,
in case the caller isn't sure what to expect, which is likely in binary-
compatible-operator cases.
Another problem with the current implementation is that if the stats array
element type is pass-by-reference, we incur a palloc/memcpy/pfree cycle
for each element. That seemed acceptable when the code was written because
we were targeting O(10) array sizes --- but these days, stats arrays are
almost always bigger than that, sometimes much bigger. We can save a
significant number of cycles by doing one palloc/memcpy/pfree of the whole
array. Indeed, in the now-probably-common case where the array is toasted,
that happens anyway so this method is basically free. (Note: although the
catcache code will inline any out-of-line toasted values, it doesn't
decompress them. At the other end of the size range, it doesn't expand
short-header datums either. In either case, DatumGetArrayTypeP would have
to make a copy. We do end up using an extra array copy step if the element
type is pass-by-value and the array length is neither small enough for a
short header nor large enough to have suffered compression. But that
seems like a very acceptable price for winning in pass-by-ref cases.)
Hence, redesign to take these insights into account. While at it,
convert to an API in which we fill a struct rather than passing a bunch
of pointers to individual output arguments. That will make it less
painful if we ever want further expansion of what get_attstatsslot can
pass back.
It's certainly arguable that this is new development and not something to
push post-feature-freeze. However, I view it as primarily bug-proofing
and therefore something that's better to have sooner not later. Since
we aren't quite at beta phase yet, let's put it in.
Discussion: https://postgr.es/m/16364.1494520862@sss.pgh.pa.us
On faster machines, the overall runtime for running the core regression
tests is under twenty seconds these days, of which the hard-wired delays
in the stats test are a significant fraction. But on closer inspection,
it seems like we shouldn't need those.
The initial 2-second delay is there only to reduce the risk of the test's
stats messages not getting sent due to contention. But analysis of the
last ten years' worth of buildfarm runs shows no evidence that such
failures actually occur. (We do see failures that look like stats
messages not getting sent, particularly on Windows; but there is little
reason to believe that the initial delay reduces their frequency.)
The later 1-second delay is there to ensure that our session's stats
will have gotten sent. But we could also do that by starting a fresh
session, which takes well under 1 second even on very slow machines.
Hence, let's remove both delays and see what happens. The first delay
was the only test of pg_sleep_for() in the regression tests, but we can
move that responsibility into wait_for_stats().
Discussion: https://postgr.es/m/17795.1493869423@sss.pgh.pa.us
Tab-completing DROP STATISTICS would only work if you started writing
the schema name containing the statistics object, because the visibility
clause was missing. To add it, we need to add SQL-callable support for
testing visibility of a statistics object, like all other object types
already have.
Discussion: https://postgr.es/m/22676.1494557205@sss.pgh.pa.us
We have now grown enough registerable syscache-invalidation callback
functions that the original assumption that there would be few of them
is causing performance problems. In particular, let's fix things so that
CallSyscacheCallbacks doesn't have to search the whole array to find
which callback(s) to invoke for a given cache ID. Preserve the original
behavior that callbacks are called in order of registration, just in
case there's someplace that depends on that (which I doubt).
In support of this, export the number of syscaches from syscache.h.
People could have found that out anyway from the enum, but adding a
#define makes that much safer.
This provides a useful additional speedup in Mathieu Fenniak's
logical-decoding test case, although we're reaching the point of
diminishing returns there. I think any further improvement will have
to come from reducing the number of cache invalidations that are
triggered in the first place. Still, we can hope that this change
gives some incremental benefit for all invalidation scenarios.
Back-patch to 9.4 where logical decoding was introduced.
Discussion: https://postgr.es/m/CAHoiPjzea6N0zuCi=+f9v_j94nfsy6y8SU7-=bp4=7qw6_i=Rg@mail.gmail.com
A test case provided by Mathieu Fenniak shows that hash_seq_search'ing
this hashtable can consume a very significant amount of overhead during
logical decoding, which triggers frequent cache invalidation. Testing
suggests that the actual population of the hashtable is often no more
than a few dozen entries, so we can cut the overhead just by dropping
the initial number of buckets down from 1024 --- I chose to cut it to 64.
(In situations where we do have a significant number of entries, we
shouldn't get any real penalty from doing this, as the dynahash.c code
will resize the hashtable automatically.)
This gives a further factor-of-two savings in Mathieu's test case.
That may be overly optimistic for real-world benefit, as real cases
may have larger average table populations, but it's hard to see it
turning into a net negative for any workload.
Back-patch to 9.4 where relfilenodemap.c was introduced.
Discussion: https://postgr.es/m/CAHoiPjzea6N0zuCi=+f9v_j94nfsy6y8SU7-=bp4=7qw6_i=Rg@mail.gmail.com
This was missed in 7b504eb282.
Remove the "default:" clause in the switch, to avoid this problem in the
future. Other switches involving the same enum should probably be
changed in the same way, but are not touched by this patch.
Discussion: https://postgr.es/m/20170512204800.iqt2uwyx3c32j45r@alvherre.pgsql
A test case provided by Mathieu Fenniak shows that the initial search for
the target catcache in CatalogCacheIdInvalidate consumes a very significant
amount of overhead in cases where cache invalidation is triggered but has
little useful work to do. There is no good reason for that search to exist
at all, as the index array maintained by syscache.c allows direct lookup of
the catcache from its ID. We just need a frontend function in syscache.c,
matching the division of labor for most other cache-accessing operations.
While there's more that can be done in this area, this patch alone reduces
the runtime of Mathieu's example by 2X. We can hope that it offers some
useful benefit in other cases too, although usually cache invalidation
overhead is not such a striking fraction of the total runtime.
Back-patch to 9.4 where logical decoding was introduced. It might be
worth going further back, but presently the only case we know of where
cache invalidation is really a significant burden is in logical decoding.
Also, older branches have fewer catcaches, reducing the possible benefit.
(Note: although this nominally changes catcache's API, we have always
documented CatalogCacheIdInvalidate as a private function, so I would
have little sympathy for an external module calling it directly. So
backpatching should be fine.)
Discussion: https://postgr.es/m/CAHoiPjzea6N0zuCi=+f9v_j94nfsy6y8SU7-=bp4=7qw6_i=Rg@mail.gmail.com
A stats object ought to have a dependency on each individual column
it reads, not the entire table. Doing this honestly lets us get rid
of the hard-wired logic in RemoveStatisticsExt, which seems to have
been misguidedly modeled on RemoveStatistics; and it will be far easier
to extend to multiple tables later.
Also, add overlooked dependency on owner, and make the dependency on
schema be NORMAL like every other such dependency.
There remains some unfinished work here, which is to allow statistics
objects to be extension members. That takes more effort than just
adding the dependency call, though, so I left it out for now.
initdb forced because this changes the set of pg_depend records that
should exist for a statistics object.
Discussion: https://postgr.es/m/22676.1494557205@sss.pgh.pa.us
Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types. Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only. (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).
Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command. This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.
Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming. He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.
Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.
Implement tab-completion for statistics objects. This can stand some
more improvement.
Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql
On MSVC builds and on back branches that means removing the hardcoded
--verbose setting. On master for Unix that means removing the empty
setting in the global Makefile so that the value can be acquired from
the environment as well as from the make arguments.
Backpatch to 9.4 where we introduced TAP tests
On Unix this path is detected via the use of xml2-config, but that's not
available on Windows. This means that users building with libxml2 will
no longer need to move things around from the standard libxml2
installation for MSVC builds.
Backpatch to all live branches.
For CREATE/ALTER PUBLICATION/SUBSCRIPTION, use similar option style as
other statements that use a WITH clause for options.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Certain recovery tests use the Perl IPC::Run module's start/kill_kill
method of processing. On at least some versions of perl this causes the
whole process and its caller to crash. If we ever find a better way of
doing these tests they can be re-enabled on this platform. This does not
affect Mingw or Cygwin builds, which use a different perl and a
different shell and so are not affected.
Lag tracking is called for each commit, but we introduce
a pacing delay to ensure we don't swamp the lag tracker.
Author: Petr Jelinek, with minor pacing delay code from me
Increase from the historical value of 32 to 64. We are up to 31 callers
of CacheRegisterSyscacheCallback() in HEAD, so if they were all to be
exercised in one process that would leave only one slot for add-on modules.
It's probably not possible for that to happen, but still we clearly need
more daylight here. (At some point it might be worth making the array
dynamically resizable; but since we've never heard a complaint of "out of
syscache_callback_list slots" happening in the field, I doubt it's worth
it yet.)
Back-patch as far as 9.4, which is where we increased the companion limit
MAX_RELCACHE_CALLBACKS (cf commit f01d1ae3a). It's not as urgent in
released branches, which have only a couple dozen call sites in core, but
it still seems that somebody might hit the limit before these branches die.
Discussion: https://postgr.es/m/12184.1494450131@sss.pgh.pa.us
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
This reverts commits fa2fa99552 and 42f50cb8fa.
While the functionality that was intended to be provided by these
commits is desired, the patch didn't actually solve as many of the
problematic situations as we hoped, and it created a bunch of its own
problems. Since we're going to require more extensive changes soon for
other reasons and users have been working around these problems for a
long time already, there is no point in spending effort in fixing this
halfway measure.
Per complaint from Tom Lane.
Discussion: https://postgr.es/m/21407.1484606922@sss.pgh.pa.us
(Commit fa2fa99552 had already been reverted in branches 9.5 as
f858524ee4 and 9.6 as e9e44a0953, so this touches master only.
Commit 42f50cb8fa was not present in the older branches.)
Previously, the memory used by the logical replication apply worker for
processing messages would never be freed, so that could end up using a
lot of memory. To improve that, change the existing ApplyContext memory
context to ApplyMessageContext and reset that after every
message (similar to MessageContext used elsewhere). For consistency of
naming, rename the ApplyCacheContext to ApplyContext.
Author: Stas Kelvich <s.kelvich@postgrespro.ru>
It turned out this approach had problems, because a DROP command should
not have any options other than CASCADE and RESTRICT. Instead, always
attempt to drop the slot if there is one configured, but also add an
ALTER SUBSCRIPTION action to set the slot to NONE.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/29431.1493730652@sss.pgh.pa.us
Values in a STATISTIC_KIND_RANGE_LENGTH_HISTOGRAM slot are float8,
not of the type of the column the statistics are for.
This bug is at least partly the fault of sloppy specification comments
for get_attstatsslot()/free_attstatsslot(): the type OID they want is that
of the stavalues entries, not of the underlying column. (I double-checked
other callers and they seem to get this right.) Adjust the comments to be
more correct.
Per buildfarm.
Security: CVE-2017-7484
Previously it would allow an invalid connection string to be set.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
This new arrangement ensures that statistics are reported right after
commit of transactions. The previous arrangement didn't get this quite
right and could lead to assertion failures.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Erik Rijkers <er@xs4all.nl>
Both views replace the umoptions field with NULL when the user does not
meet qualifications to see it. They used different qualifications, and
pg_user_mappings documented qualifications did not match its implemented
qualifications. Make its documentation and implementation match those
of user_mapping_options. One might argue for stronger qualifications,
but these have long, documented tenure. pg_user_mappings has always
exhibited this problem, so back-patch to 9.2 (all supported versions).
Michael Paquier and Feike Steenbergen. Reviewed by Jeff Janes.
Reported by Andrew Wheelwright.
Security: CVE-2017-7486
Commit 65c3bf19fd moved handling of the,
already then, deprecated requiressl parameter into conninfo_storeval().
The default PGREQUIRESSL environment variable was however lost in the
change resulting in a potentially silent accept of a non-SSL connection
even when set. Its documentation remained. Restore its implementation.
Also amend the documentation to mark PGREQUIRESSL as deprecated for
those not following the link to requiressl. Back-patch to 9.3, where
commit 65c3bf1 first appeared.
Behavior has been more complex when the user provides both deprecated
and non-deprecated settings. Before commit 65c3bf1, libpq operated
according to the first of these found:
requiressl=1
PGREQUIRESSL=1
sslmode=*
PGSSLMODE=*
(Note requiressl=0 didn't override sslmode=*; it would only suppress
PGREQUIRESSL=1 or a previous requiressl=1. PGREQUIRESSL=0 had no effect
whatsoever.) Starting with commit 65c3bf1, libpq ignored PGREQUIRESSL,
and order of precedence changed to this:
last of requiressl=* or sslmode=*
PGSSLMODE=*
Starting now, adopt the following order of precedence:
last of requiressl=* or sslmode=*
PGSSLMODE=*
PGREQUIRESSL=1
This retains the 65c3bf1 behavior for connection strings that contain
both requiressl=* and sslmode=*. It retains the 65c3bf1 change that
either connection string option overrides both environment variables.
For the first time, PGSSLMODE has precedence over PGREQUIRESSL; this
avoids reducing security of "PGREQUIRESSL=1 PGSSLMODE=verify-full"
configurations originating under v9.3 and later.
Daniel Gustafsson
Security: CVE-2017-7485
Some selectivity estimation functions run user-supplied operators over
data obtained from pg_statistic without security checks, which allows
those operators to leak pg_statistic data without having privileges on
the underlying tables. Fix by checking that one of the following is
satisfied: (1) the user has table or column privileges on the table
underlying the pg_statistic data, or (2) the function implementing the
user-supplied operator is leak-proof. If neither is satisfied, planning
will proceed as if there are no statistics available.
At least one of these is satisfied in most cases in practice. The only
situations that are negatively impacted are user-defined or
not-leak-proof operators on a security-barrier view.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Author: Peter Eisentraut <peter_e@gmx.net>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Security: CVE-2017-7484
Storing passwords in plaintext hasn't been a good idea for a very long
time, if ever. Now seems like a good time to finally forbid it, since we're
messing with this in PostgreSQL 10 anyway.
Remove the CREATE/ALTER USER UNENCRYPTED PASSSWORD 'foo' syntax, since
storing passwords unencrypted is no longer supported. ENCRYPTED PASSWORD
'foo' is still accepted, but ENCRYPTED is now just a noise-word, it does
the same as just PASSWORD 'foo'.
Likewise, remove the --unencrypted option from createuser, but accept
--encrypted as a no-op for backward compatibility. AFAICS, --encrypted was
a no-op even before this patch, because createuser encrypted the password
before sending it to the server even if --encrypted was not specified. It
added the ENCRYPTED keyword to the SQL command, but since the password was
already in encrypted form, it didn't make any difference. The documentation
was not clear on whether that was intended or not, but it's moot now.
Also, while password_encryption='on' is still accepted as an alias for
'md5', it is now marked as hidden, so that it is not listed as an accepted
value in error hints, for example. That's not directly related to removing
'plain', but it seems better this way.
Reviewed by Michael Paquier
Discussion: https://www.postgresql.org/message-id/16e9b768-fd78-0b12-cfc1-7b6b7f238fde@iki.fi
In the backend, this is just to silence coverity warnings, but in the
frontend, it's a genuine leak, even if extremely rare.
Spotted by Coverity, patch by Michael Paquier.
The upstream IANA code does not guard against null TM_ZONE pointers in this
function, but in our code there is such a check in the other pre-existing
use of t->tm_zone. We do have some places that set pg_tm.tm_zone to NULL.
I'm not entirely sure it's possible to reach strftime with such a value,
but I'm not sure it isn't either, so be safe.
Per Coverity complaint.
Somehow, we'd missed ever doing this. The consequences aren't too
severe: basically, the timezone library would fall back on its hardwired
notion of the DST transition dates to use for a POSIX-style zone name,
rather than obeying US/Eastern which is the intended behavior. The net
effect would only be to obey current US DST law further back than it
ought to apply; so it's not real surprising that nobody noticed.
David Rowley, per report from Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LC7CaNhRAQ__C3ht1JVrPzaAXXhEJRnR5L6bfYHiLmWw@mail.gmail.com
Fix oversight in commit af2c5aa88: if the shortcut open() doesn't work,
we need to reset fullname[] to be just the name of the toplevel tzdata
directory before we fall through into the pre-existing code. This failed
to be exposed in my (tgl's) testing because the fall-through path is
actually never taken under normal circumstances.
David Rowley, per report from Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LC7CaNhRAQ__C3ht1JVrPzaAXXhEJRnR5L6bfYHiLmWw@mail.gmail.com
buildDefaultACLCommands() didn't destroy the string buffer created in
certain cases, leading to a memory leak. Fix by destroying the buffer
before returning from the function.
Spotted by Coverity.
Author: Michael Paquier
Back-patch to 9.6 where buildDefaultACLCommands() was added.
When we add the SELECT-privilege based policies to the RLS with check
options (such as for an UPDATE statement, or when we have INSERT ...
RETURNING), we need to be sure and use the 'USING' case if the policy is
actually an 'ALL' policy (which could have both a USING clause and an
independent WITH CHECK clause).
This could result in policies acting differently when built using ALL
(when the ALL had both USING and WITH CHECK clauses) and when building
the policies independently as SELECT and UPDATE policies.
Fix this by adding an explicit boolean to add_with_check_options() to
indicate when the USING policy should be used, even if the policy has
both USING and WITH CHECK policies on it.
Reported by: Rod Taylor
Back-patch to 9.5 where RLS was introduced.
Since 6ef2eba3f5 ("Skip checkpoints, archiving on idle systems."),
GetLastImportantRecPtr() is used to avoid performing superfluous
checkpoints, xlog switches, running-xact records when the system is
idle. Unfortunately the check concerning running-xact records had a
off-by-one error, leading to such records being potentially skipped
when only a single record has been inserted since the last
running-xact record.
An alternative approach would have been to change
GetLastImportantRecPtr()'s definition to point to the end of records,
but that would make the checkpoint code more complicated.
Author: Andres Freund
Discussion: https://postgr.es/m/20170505012447.wsrympaxnfis6ojt@alap3.anarazel.de
Backpatch: no, code only present in master
Commit eaba54c20c added support for Tcl 8.6 for configure-supported
platforms after verifying that pltcl works without further changes, but
the MSVC tooling wasn't updated accordingly. Update MSVC to match,
restructuring the code to avoid duplicating the logic for every Tcl
version supported.
Backpatch to all live branches, like eaba54c20c. In 9.4 and previous,
change the patch to use backslashes rather than forward, as in the rest
of the file.
Reported by Paresh More, who also tested the patch I provided.
Discussion: https://postgr.es/m/CAAgiCNGVw3ssBtSi3ZNstrz5k00ax=UV+_ZEHUeW_LMSGL2sew@mail.gmail.com
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and throws
a PANIC if so. At that point, only walsenders are still active, so one
might think this could not happen, but walsenders can also generate WAL,
for instance in BASE_BACKUP and certain variants of
CREATE_REPLICATION_SLOT. So they can trigger this panic if such a
command is run while the shutdown checkpoint is being written.
To fix this, divide the walsender shutdown into two phases. First, the
postmaster sends a SIGUSR2 signal to all walsenders. The walsenders
then put themselves into the "stopping" state. In this state, they
reject any new commands. (For simplicity, we reject all new commands,
so that in the future we do not have to track meticulously which
commands might generate WAL.) The checkpointer waits for all walsenders
to reach this state before proceeding with the shutdown checkpoint.
After the shutdown checkpoint is done, the postmaster sends
SIGINT (previously unused) to the walsenders. This triggers the
existing shutdown behavior of sending out the shutdown checkpoint record
and then terminating.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
The salt is stored base64-encoded. With the old 10 bytes raw length, it was
always padded to 16 bytes after encoding. We might as well use 12 raw bytes
for the salt, and it's still encoded into 16 bytes.
Similarly for the random nonces, use a raw length that's divisible by 3, so
that there's no padding after base64 encoding. Make the nonces longer while
we're at it. 10 bytes was probably enough to prevent replay attacks, but
there's no reason to be skimpy here.
Per suggestion from Álvaro Hernández Tortosa.
Discussion: https://www.postgresql.org/message-id/df8c6e27-4d8e-5281-96e5-131a4e638fc8@8kdata.com
* Remove is_scram_verifier() function. It was unused.
* Fix sanitize_char() function, used in error messages on protocol
violations, to print bytes >= 0x7F correctly.
* Change spelling of scram_MockSalt() function to be more consistent with
the surroundings.
* Change a few more references to "server proof" to "server signature" that
I missed in commit d981074c24.
Instead, send the same FATAL message as with other password-based
authentication mechanisms. This gives a more user-friendly message:
psql: FATAL: password authentication failed for user "test"
instead of:
psql: error received from server in SASL exchange: invalid-proof
Even before this patch, the server sent that FATAL message, after the
SCRAM-specific "e=invalid-proof" message. But libpq would stop at the
SCRAM error message, and not process the ErrorResponse that would come
after that. We could've taught libpq to check for an ErrorResponse after
failed authentication, but it's simpler to modify the server to send only
the ErrorResponse. The SCRAM specification allows for aborting the
authentication at any point, using an application-defined error mechanism,
like PostgreSQL's ErrorResponse. Using the e=invalid-proof message is
optional.
Reported by Jeff Janes.
Discussion: https://www.postgresql.org/message-id/CAMkU%3D1w3jQ53M1OeNfN8Cxd9O%2BA_9VONJivTbYoYRRdRsLT6vA@mail.gmail.com
This gets rid of the code that issued separate queries to retrieve the
partitioning parent-child relationship, parent partition key, and child
partition bound information. With this patch, the information is
retrieved instead using the queries issued from getTables() and
getInherits(), which is both more efficient than the previous approach
and doesn't require any new code.
Since the partitioning parent-child relationship is now retrieved with
the same old code that handles inheritance, partition attributes receive
a proper flagInhAttrs() treatment (that it didn't receive before), which
is needed so that the inherited NOT NULL constraints are not emitted if
we already emitted it for the parent.
Also, fix a bug in pg_dump's --binary-upgrade code, which caused pg_dump
to emit invalid command to attach a partition to its parent.
Author: Amit Langote, with some additional changes by me.
GiST's getNextNearest() function attempts to pfree the previously-returned
tuple if any (that is, scan->xs_hitup in HEAD, or scan->xs_itup in older
branches). However, if we are rescanning a plan node after ending a
previous scan early, those tuple pointers could be pointing to garbage,
because they would be pointing into the scan's pageDataCxt or queueCxt
which has been reset. In a debug build this reliably results in a crash,
although I think it might sometimes accidentally fail to fail in
production builds.
To fix, clear the pointer field anyplace we reset a context it might
be pointing into. This may be overkill --- I think probably only the
queueCxt case is involved in this bug, so that resetting in gistrescan()
would be sufficient --- but dangling pointers are generally bad news,
so let's avoid them.
Another plausible answer might be to just not bother with the pfree in
getNextNearest(). The reconstructed tuples would go away anyway in the
context resets, and I'm far from convinced that freeing them a bit earlier
really saves anything meaningful. I'll stick with the original logic in
this patch, but if we find more problems in the same area we should
consider that approach.
Per bug #14641 from Denis Smirnov. Back-patch to 9.5 where this
logic was introduced.
Discussion: https://postgr.es/m/20170504072034.24366.57688@wrigleys.postgresql.org
password_encryption was a boolean before version 10, so cope with "on" and
"off".
Also, change the behavior with "plain", to treat it the same as "md5".
We're discussing removing the password_encryption='plain' option from the
server altogether, which will make this the only reasonable choice, but
even if we kept it, it seems best to never send the password in cleartext.
It only produced <row> elements but no wrapping <table> element.
By contrast, cursor_to_xmlschema produced a schema that is now correct
but did not previously match the XML data produced by cursor_to_xml.
In passing, also fix a minor misunderstanding about moving cursors in
the tests related to this.
Reported-by: filip@jirsak.org
Based-on-patch-by: Thomas Munro <thomas.munro@enterprisedb.com>
This removes a test case added by commit b69ec7cc9, which was intended
to exercise a corner case involving the rule used at that time that
materialized views were unpopulated iff they had physical size zero.
We got rid of that rule very shortly later, in commit 1d6c72a55, but
kept the test case. However, because the case now asks what VACUUM
will do to a zero-sized physical file, it would be pretty surprising
if the answer were ever anything but "nothing" ... and if things were
indeed that broken, surely we'd find it out from other tests. Since
the test involves a table that's fairly large by regression-test
standards (100K rows), it's quite slow to run. Dropping it should
save some buildfarm cycles, so let's do that.
Discussion: https://postgr.es/m/32386.1493831320@sss.pgh.pa.us
It's easy to overlook the need for one, and its lack is annoying for the
next developer wanting to create a new test. Rather than expect every
individual command to add the semicolon, just append one automatically.
Discussion: http://postgr.es/m/20170503172746.rwftidszir67sgk7@alvherre.pgsql
tzparse() would attempt to load the "posixrules" timezone database file on
each call. That might seem like it would only be an issue when selecting a
POSIX-style zone name rather than a zone defined in the timezone database,
but it turns out that each zone definition file contains a POSIX-style zone
string and tzload() will call tzparse() to parse that. Thus, when scanning
the whole timezone file tree as we do in the pg_timezone_names view,
"posixrules" was read repetitively for each zone definition file. Fix
that by caching the file on first use within any given process. (We cache
other zone definitions for the life of the process, so there seems little
reason not to cache this one as well.) This probably won't help much in
processes that never run pg_timezone_names, but even one additional SET
of the timezone GUC would come out ahead.
An even worse problem for pg_timezone_names is that pg_open_tzfile()
has an inefficient way of identifying the canonical case of a zone name:
it basically re-descends the directory tree to the zone file. That's not
awful for an individual "SET timezone" operation, but it's pretty horrid
when we're inspecting every zone in the database. And it's pointless too
because we already know the canonical spelling, having just read it from
the filesystem. Fix by teaching pg_open_tzfile() to avoid the directory
search if it's not asked for the canonical name, and backfilling the
proper result in pg_tzenumerate_next().
In combination these changes seem to make the pg_timezone_names view
about 3x faster to read, for me. Since a scan of pg_timezone_names
has up to now been one of the slowest queries in the regression tests,
this should help some little bit for buildfarm cycle times.
Back-patch to all supported branches, not so much because it's likely
that users will care much about the view's performance as because
tracking changes in the upstream IANA timezone code is really painful
if we don't keep all the branches in sync.
Discussion: https://postgr.es/m/27962.1493671706@sss.pgh.pa.us
create_singleton_array() was not really as useful as we perhaps thought
when we added it. It had never accreted more than one call site, and is
only saving a dozen lines of code at that one, which is considerably less
bulk than the function itself. Moreover, because of its insistence on
using the caller's fn_extra cache space, it's arguably a coding hazard.
text_to_array_internal() does not currently use fn_extra in any other way,
but if it did it would be subtly broken, since the conflicting fn_extra
uses could be needed within a single query, in the seldom-tested case that
the field separator varies during the query. The same objection seems
likely to apply to any other potential caller.
The replacement code is a bit uglier, because it hardwires knowledge of
the storage parameters of type TEXT, but it's not like we haven't got
dozens or hundreds of other places that do the same. Uglier seems like
a good tradeoff for smaller, faster, and safer.
Per discussion with Neha Khatri.
Discussion: https://postgr.es/m/CAFO0U+_fS5SRhzq6uPG+4fbERhoA9N2+nPrtvaC9mmeWivxbsA@mail.gmail.com
Due to a missing CommandCounterIncrement() call, parsing of a non-utility
command in an extension script would not see the effects of the immediately
preceding DDL command, unless that command's execution ends with
CommandCounterIncrement() internally ... which some do but many don't.
Report by Philippe Beaudoin, diagnosis by Julien Rouhaud.
Rather remarkably, this bug has evaded detection since extensions were
invented, so back-patch to all supported branches.
Discussion: https://postgr.es/m/2cf7941e-4e41-7714-3de8-37b1a8f74dff@free.fr
ALTER SEQUENCE can do nontransactional changes to the sequence (RESTART
clause) and transactional updates to the pg_sequence catalog (most other
clauses). When just calling RESTART, the code would still needlessly do
a catalog update without any changes. This would entangle that
operation in the concurrency issues of a catalog update (causing either
locking or concurrency errors, depending on how that issue is to be
resolved).
Fix by keeping track during options parsing whether a catalog update is
needed, and skip it if not.
Reported-by: Jason Petersen <jason@citusdata.com>
This goes together with the changes made to enable replication on the
sending side by default (wal_level, max_wal_senders etc) by making the
receiving stadby node also enable it by default.
Huong Dangminh
If the inner relation can be proven unique, that is it can have no more
than one matching row for any row of the outer query, then we might as
well implement the semijoin as a plain inner join, allowing substantially
more freedom to the planner. This is a form of outer join strength
reduction, but it can't be implemented in reduce_outer_joins() because
we don't have enough info about the individual relations at that stage.
Instead do it much like remove_useless_joins(): once we've built base
relations, we can make another pass over the SpecialJoinInfo list and
get rid of any entries representing reducible semijoins.
This is essentially a followon to the inner-unique patch (commit 9c7f5229a)
and makes use of the proof machinery that that patch created. We need only
minor refactoring of innerrel_is_unique's API to support this usage.
Per performance complaint from Teodor Sigaev.
Discussion: https://postgr.es/m/f994fc98-389f-4a46-d1bc-c42e05cb43ed@sigaev.ru