When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
Logical decoding set SnapshotData's regd_count field to avoid the
snapshot manager from prematurely freeing snapshots that are generated
by the decoding system. That was always an abuse of the field, as it was
never supposed to be used outside the snapshot manager. Commit 94028691
made snapshot manager's tracking of the snapshots smarter, and that scheme
fell apart. The snapshot manager got confused and hit the assertion, when
a snapshot that was marked with regd_count==1 was not found in the heap,
where the snapshot manager tracks registered the snapshots.
To fix, don't abuse the regd_count field like that. Logical decoding still
abuses the active_count field for similar purposes, but that's currently
harmless.
The assertion failure was first reported by Michael Paquier
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
Similarly to previous fix 9b8d478, commit 2c03216 has switched
XLogReaderAllocate() to use a set of palloc calls instead of malloc,
causing any callers of this function to fail with an error instead of
receiving a NULL pointer in case of out-of-memory error. Fix this by
using palloc_extended with MCXT_ALLOC_NO_OOM that will safely return
NULL in case of an OOM.
Michael Paquier, slightly modified by me.
Since 465883b0a two versions of commit records have existed. A compact
version that was used when no cache invalidations, smgr unlinks and
similar were needed, and a full version that could deal with all
that. Additionally the full version was embedded into twophase commit
records.
That resulted in a measurable reduction in the size of the logged WAL in
some workloads. But more recently additions like logical decoding, which
e.g. needs information about the database something was executed on,
made it applicable in fewer situations. The static split generally made
it hard to expand the commit record, because concerns over the size made
it hard to add anything to the compact version.
Additionally it's not particularly pretty to have twophase.c insert
RM_XACT records.
Rejigger things so that the commit and abort records only have one form
each, including the twophase equivalents. The presence of the various
optional (in the sense of not being in every record) pieces is indicated
by a bits in the 'xinfo' flag. That flag previously was not included in
compact commit records. To prevent an increase in size due to its
presence, it's only included if necessary; signalled by a bit in the
xl_info bits available for xact.c, similar to heapam.c's
XLOG_HEAP_OPMASK/XLOG_HEAP_INIT_PAGE.
Twophase commit/aborts are now the same as their normal
counterparts. The original transaction's xid is included in an optional
data field.
This means that commit records generally are smaller, except in the case
of a transaction with subtransactions, but no other special cases; the
increase there is four bytes, which seems acceptable given that the more
common case of not having subtransactions shrank. The savings are
especially measurable for twophase commits, which previously always used
the full version; but will in practice only infrequently have required
that.
The motivation for this work are not the space savings and and
deduplication though; it's that it makes it easier to extend commit
records with additional information. That's just a few lines of code
now; without impacting the common case where that information is not
needed.
Discussion: 20150220152150.GD4149@awork2.anarazel.de,
235610.92468.qm%40web29004.mail.ird.yahoo.com
Reviewed-By: Heikki Linnakangas, Simon Riggs
This requires changing quite a few places that were depending on
sizeof(HeapTupleHeaderData), but it seems for the best.
Michael Paquier, some adjustments by me
On closer inspection, we can remove the "volatile" qualifier on
"using_subtxn" so long as we initialize that before the PG_TRY block,
which there's no particularly good reason not to do.
Also, push the "change" variable inside the PG_TRY so as to remove
all question of whether it needs "volatile", and remove useless
early initializations of "snapshow_now" and "using_subtxn".
"iterstate" must be marked volatile since it's changed inside the PG_TRY
block and then used in the PG_CATCH stanza. Noted by Mark Wilding of
Salesforce. (We really need to see if we can't get the C compiler to warn
about this.)
Also, reset iterstate to NULL after the mainline ReorderBufferIterTXNFinish
call, to ensure the PG_CATCH block doesn't try to do that a second time.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
In passing, also make some debugging elog's in pgstat.c a bit more
consistently worded.
Back-patch as far as applicable (9.3 or 9.4; none of these mistakes are
really old).
Mark Dilger identified and patched the type violations; the message
rewordings are mine.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
The logical decoding patchset introduced PROC_IN_LOGICAL_DECODING flag
PGXACT flag, that allows such backends to be skipped when computing
the xmin horizon/snapshots. That's fine and sensible for walsenders
streaming out logical changes, but not at all fine for SQL backends
doing logical decoding. If the latter set that flag any change they
have performed outside of logical decoding will not be regarded as
visible - which e.g. can lead to that change being vacuumed away.
Note that not setting the flag for SQL backends isn't particularly
bothersome - the SQL backend doesn't do streaming, so it only runs for
a limited amount of time.
Per buildfarm member 'tick' and Alvaro.
Backpatch to 9.4, where logical decoding was introduced.
Add a new XLOG_FPI_FOR_HINT record type, and use that for full-page images
generated for hint bit updates, when checksums are enabled. The new record
type is replayed exactly the same as XLOG_FPI, but allows them to be tallied
separately e.g. in pg_xlogdump.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
There are basically three situations in which logical decoding needs
to perform cache invalidation. During/After replaying a transaction
with catalog changes, when skipping a uninteresting transaction that
performed catalog changes and when erroring out while replaying a
transaction. Unfortunately these three cases were all done slightly
differently - partially because 8de3e410fa, which greatly simplifies
matters, got committed in the midst of the development of logical
decoding.
The actually problematic case was when logical decoding skipped
transaction commits (and thus processed invalidations). When used via
the SQL interface cache invalidation could access the catalog - bad,
because we didn't set up enough state to allow that correctly. It'd
not be hard to setup sufficient state, but the simpler solution is to
always perform cache invalidation outside a valid transaction.
Also make the different cache invalidation cases look as similar as
possible, to ease code review.
This fixes the assertion failure reported by Antonin Houska in
53EE02D9.7040702@gmail.com. The presented testcase has been expanded
into a regression test.
Backpatch to 9.4, where logical decoding was introduced.
When building the initial historic catalog snapshot there were
scenarios where snapbuild.c would use incorrect xmin/xmax values when
starting from a xl_running_xacts record. The values used were always a
bit suspect, but happened to be correct in the easy to test
cases. Notably the values used when the the initial snapshot was
computed while no other transactions were running were correct.
This is likely to be the cause of the occasional buildfarm failures on
animals markhor and tick; but it's quite possible to reproduce
problems without CLOBBER_CACHE_ALWAYS.
Backpatch to 9.4, where logical decoding was introduced.
Heikki noticed in 544E23C0.8090605@vmware.com that slot.c and
snapbuild.c were missing the FIN_CRC32 call when computing/checking
checksums of on disk files. That doesn't lower the the error detection
capabilities of the checksum, but is inconsistent with other usages.
In a followup mail Heikki also noticed that, contrary to a comment,
the 'version' and 'length' struct fields of replication slot's on disk
data where not covered by the checksum. That's not likely to lead to
actually missed corruption as those fields are cross checked with the
expected version and the actual file length. But it's wrong
nonetheless.
As fixing these issues makes existing on disk files unreadable, bump
the expected versions of on disk files for both slots and logical
decoding historic catalog snapshots. This means that loading old
files will fail with
ERROR: "replication slot file ... has unsupported version 1"
and
ERROR: "snapbuild state file ... has unsupported version 1 instead of
2" respectively. Given the low likelihood of anybody already using
these new features in a production setup that seems acceptable.
Fixing these issues made me notice that there's no regression test
covering the loading of historic snapshot from disk - so add one.
Backpatch to 9.4 where these features were introduced.
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
log_newpage is used by many indexams, in addition to heap, but for
historical reasons it's always been part of the heapam rmgr. Starting with
9.3, we have another WAL record type for logging an image of a page,
XLOG_FPI. Simplify things by moving log_newpage and log_newpage_buffer to
xlog.c, and switch to using the XLOG_FPI record type.
Bump the WAL version number because the code to replay the old HEAP_NEWPAGE
records is removed.
Commit 1b86c81d2d fixed the decoding of toasted columns for the rows
contained in one xl_heap_multi_insert record. But that's not actually
enough, because heap_multi_insert() will actually first toast all
passed in rows and then emit several *_multi_insert records; one for
each page it fills with tuples.
Add a XLOG_HEAP_LAST_MULTI_INSERT flag which is set in
xl_heap_multi_insert->flag denoting that this multi_insert record is
the last emitted by one heap_multi_insert() call. Then use that flag
in decode.c to only set clear_toast_afterwards in the right situation.
Expand the number of rows inserted via COPY in the corresponding
regression test to make sure that more than one heap page is filled
with tuples by one heap_multi_insert() call.
Backpatch to 9.4 like the previous commit.
When decoding the results of a HEAP2_MULTI_INSERT (currently only
generated by COPY FROM) toast columns for all but the last tuple
weren't replaced by their actual contents before being handed to the
output plugin. The reassembled toast datums where disregarded after
every REORDER_BUFFER_CHANGE_(INSERT|UPDATE|DELETE) which is correct
for plain inserts, updates, deletes, but not multi inserts - there we
generate several REORDER_BUFFER_CHANGE_INSERTs for a single
xl_heap_multi_insert record.
To solve the problem add a clear_toast_afterwards boolean to
ReorderBufferChange's union member that's used by modifications. All
row changes but multi_inserts always set that to true, but
multi_insert sets it only for the last change generated.
Add a regression test covering decoding of multi_inserts - there was
none at all before.
Backpatch to 9.4 where logical decoding was introduced.
Bug found by Petr Jelinek.
The old name wasn't very descriptive as of actual contents of the
directory, which are historical snapshots in the snapshots/
subdirectory and mappingdata for rewritten tuples in
mappings/. There's been a fair amount of discussion what would be a
good name. I'm settling for pg_logical because it's likely that
further data around logical decoding and replication will need saving
in the future.
Also add the missing entry for the directory into storage.sgml's list
of PGDATA contents.
Bumps catversion as the data directories won't be compatible.
When reading large amounts of preexisting WAL during logical decoding
using the SQL interface we possibly could fail to check interrupts in
due time. Similarly the same could happen on systems with a very high
WAL volume while creating a new logical replication slot, independent
of the used interface.
Previously these checks where only performed in xlogreader's read_page
callbacks, while waiting for new WAL to be produced. That's not
sufficient though, if there's never a need to wait. Walsender's send
loop already contains a interrupt check.
Backpatch to 9.4 where the logical decoding feature was introduced.
Change the order of checks in similar functions to be the same; remove
a parameter that's not needed anymore; rename a memory context and
expand a couple of comments.
Per review comments from Amit Kapila
A ReorderBufferTransaction's end_lsn, the sentPtr advocated by
walsender keepalive messages, and the end location remembered by the
decoding get_*changes* SQL functions all use the location of the last
read record + 1. I.e. the LSN points to the beginning of the next
record. That cannot realistically be changed without changing the
replication protocol because that's how keepalive messages have worked
since 9.0.
The bug is that the logic inside the snapshot builder, which decides
whether a transaction's contents should be decoded, assumed the start
location would point towards the last byte of the last record. The
reason this didn't actually cause visible problems is that currently
that decision is only made for commit records. Since interesting
transactions always have at least one additional record - containing
actual data - we'd never skip a transaction.
But if there ever were transactions, or other events, with just one
record containing important information, we'd skip them after stopping
and restarting logical decoding.
The xl_heap_header_len structures in an XLOG_HEAP_UPDATE record aren't
necessarily aligned adequately. The regular replay function for these
records is aware of that, but decode.c didn't get the memo. I'm not
sure why the buildfarm failed to catch this; the test_decoding test
certainly blows up real good on my old HPPA box.
Also, I'm pretty sure that the address arithmetic was wrong for the
case of XLOG_HEAP_CONTAINS_OLD and not XLOG_HEAP_CONTAINS_NEW_TUPLE,
though this apparently can't happen when logical decoding is active.
The decoding of prepared transaction commits accidentally used the XID of
the transaction performing the COMMIT PREPARED, not the XID of the prepared
transaction. Before bb38fb0d43 that lead to those transactions not being
decoded, afterwards to a assertion failure.
Post-commit review identified a number of places where addition was
used instead of multiplication or memory wasn't zeroed where it should
have been. This commit also fixes one case where a structure member
was mis-initialized, and moves another memory allocation closer to
the place where the allocated storage is used for clarity.
Andres Freund
Be more clear about failure cases in relfilenode->relation lookup,
and fix some other places that were inconsistent or not per our
message style guidelines.
Andres Freund and Tom Lane
Commit a730183926 created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
With this in place, a session blocking behind another one because of
tuple locks will get a context line mentioning the relation name, tuple
TID, and operation being done on tuple. For example:
LOG: process 11367 still waiting for ShareLock on transaction 717 after 1000.108 ms
DETAIL: Process holding the lock: 11366. Wait queue: 11367.
CONTEXT: while updating tuple (0,2) in relation "foo"
STATEMENT: UPDATE foo SET value = 3;
Most usefully, the new line is displayed by log entries due to
log_lock_waits, although of course it will be printed by any other log
message as well.
Author: Christian Kruse, some tweaks by Álvaro Herrera
Reviewed-by: Amit Kapila, Andres Freund, Tom Lane, Robert Haas
In b89e151054 I had assumed it was ok to use anonymous unions as
struct members, but while a longstanding extension in many compilers,
it's only been standardized in C11.
To fix, remove one of the anonymous unions which tried to hide some
implementation specific enum values and give the other a name. The
latter unfortunately requires changes in output plugins, but since the
feature has only been added a few days ago...
Andres Freund
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
