The previous logic here created a separate pool of arcs for each
state, so that the out-arcs of each state were physically stored
within it. Perhaps this choice was driven by trying to not include
a "from" pointer within each arc; but Spencer gave up on that idea
long ago, and it's hard to see what the value is now. The approach
turns out to be fairly disastrous in terms of memory consumption,
though. In the first place, NFAs built by this engine seem to have
about 4 arcs per state on average, with a majority having only one
or two out-arcs. So pre-allocating 10 out-arcs for each state is
already cause for a factor of two or more bloat. Worse, the NFA
optimization phase moves arcs around with abandon. In a large NFA,
some of the states will have hundreds of out-arcs, so towards the
end of the optimization phase we have a significant number of states
whose arc pools have room for hundreds of arcs each, even though only
a few of those arcs are in use. We have seen real-world regexes in
which this effect bloats the memory requirement by 25X or even more.
Hence, get rid of the per-state arc pools in favor of a single arc
pool for the whole NFA, with variable-sized allocation batches
instead of always asking for 10 at a time. While we're at it,
let's batch the allocations of state structs too, to further reduce
the malloc traffic.
This incidentally allows moveouts() to be optimized in a similar
way to moveins(): when moving an arc to another state, it's now
valid to just re-link the same arc struct into a different outchain,
where before the code invariants required us to make a physically
new arc and then free the old one.
These changes reduce the regex compiler's typical space consumption
for average-size regexes by about a factor of two, and much more for
large or complicated regexes. In a large test set of real-world
regexes, we formerly had half a dozen cases that failed with "regular
expression too complex" due to exceeding the REG_MAX_COMPILE_SPACE
limit (about 150MB); we would have had to raise that limit to
something close to 400MB to make them work with the old code. Now,
none of those cases need more than 13MB to compile. Furthermore,
the test set is about 10% faster overall due to less malloc traffic.
Discussion: https://postgr.es/m/168861.1614298592@sss.pgh.pa.us
makeDependencyGraphWalker and checkWellFormedRecursionWalker
thought they could hold onto a pointer to a list's first
cons cell while the list was modified by recursive calls.
That was okay when the cons cell was actually separately
palloc'd ... but since commit 1cff1b95a, it's quite unsafe,
leading to core dumps or incorrect complaints of faulty
WITH nesting.
In the field this'd require at least a seven-deep WITH nest
to cause an issue, but enabling DEBUG_LIST_MEMORY_USAGE
allows the bug to be seen with lesser nesting depths.
Per bug #16801 from Alexander Lakhin. Back-patch to v13.
Michael Paquier and Tom Lane
Discussion: https://postgr.es/m/16801-393c7922143eaa4d@postgresql.org
Teach VACUUM VERBOSE to report on pages deleted by the _current_ VACUUM
operation -- these are newly deleted pages. VACUUM VERBOSE continues to
report on the total number of deleted pages in the entire index (no
change there). The former is a subset of the latter.
The distinction between each category of deleted index page only arises
with index AMs where page deletion is supported and is decoupled from
page recycling for performance reasons.
This is follow-up work to commit e5d8a999, which made nbtree store
64-bit XIDs (not 32-bit XIDs) in pages at the point at which they're
deleted. Note that the btm_last_cleanup_num_delpages metapage field
added by that commit usually gets set to pages_newly_deleted. The
exceptions (the scenarios in which they're not equal) all seem to be
tricky cases for the implementation (of page deletion and recycling) in
general.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX%3Dd5u-tRYhi-F4wnV2uN2zHpMUXw%40mail.gmail.com
We aren't publishing this file as documentation, and it's been
much more haphazardly maintained than the real docs in func.sgml,
so let's just drop it. I think the only reason I included it in
commit 7bcc6d98f was that the Berkeley-era sources had had a man
page in this directory.
Discussion: https://postgr.es/m/4099447.1614186542@sss.pgh.pa.us
Newline is certainly not a digit, nor a word character, so it is
sensible that it should match these complemented character classes.
Previously, \D and \W acted that way by default, but in
newline-sensitive mode ('n' or 'p' flag) they did not match newlines.
This behavior was previously forced because explicit complemented
character classes don't match newlines in newline-sensitive mode;
but as of the previous commit that implementation constraint no
longer exists. It seems useful to change this because the primary
real-world use for newline-sensitive mode seems to be to match the
default behavior of other regex engines such as Perl and Javascript
... and their default behavior is that these match newlines.
The old behavior can be kept by writing an explicit complemented
character class, i.e. [^[:digit:]] or [^[:word:]]. (This means
that \D and \W are not exactly equivalent to those strings, but
they weren't anyway.)
Discussion: https://postgr.es/m/3220564.1613859619@sss.pgh.pa.us
The complement-class escapes \D, \S, \W are now allowed within
bracket expressions. There is no semantic difficulty with doing
that, but the rather hokey macro-expansion-based implementation
previously used here couldn't cope.
Also, invent "word" as an allowed character class name, thus "\w"
is now equivalent to "[[:word:]]" outside brackets, or "[:word:]"
within brackets. POSIX allows such implementation-specific
extensions, and the same name is used in e.g. bash.
One surprising compatibility issue this raises is that constructs
such as "[\w-_]" are now disallowed, as our documentation has always
said they should be: character classes can't be endpoints of a range.
Previously, because \w was just a macro for "[:alnum:]_", such a
construct was read as "[[:alnum:]_-_]", so it was accepted so long as
the character after "-" was numerically greater than or equal to "_".
Some implementation cleanup along the way:
* Remove the lexnest() hack, and in consequence clean up wordchrs()
to not interact with the lexer.
* Fix colorcomplement() to not be O(N^2) in the number of colors
involved.
* Get rid of useless-as-far-as-I-can-see calls of element()
on single-character character element names in brackpart().
element() always maps these to the character itself, and things
would be quite broken if it didn't --- should "[a]" match something
different than "a" does? Besides, the shortcut path in brackpart()
wasn't doing this anyway, making it even more inconsistent.
Discussion: https://postgr.es/m/2845172.1613674385@sss.pgh.pa.us
Discussion: https://postgr.es/m/3220564.1613859619@sss.pgh.pa.us
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
d2d8a229bc introduced a new function generate_useful_gather_paths to
be used as a replacement for generate_gather_paths, but forgot to update
a couple of places that referenced the older function.
This is possibly not 100% complete (ref. create_ordered_paths), but it's
better than not changing anything.
Author: "Hou, Zhijie" <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/4ce1d5116fe746a699a6d29858c6a39a@G08CNEXMBPEKD05.g08.fujitsu.local
Commit 866e24d47d added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
gcc 10 is smart enough to notice that control could reach this
"hasmatch[depth]" assignment with depth < 0, but not smart enough
to know that that would require a badly broken NFA graph. Change
the assert() to a plain runtime test to shut it up.
Per report from Andres Freund.
Discussion: https://postgr.es/m/20210223173437.b3ywijygsy6q42gq@alap3.anarazel.de
As envisioned in commit c98763bf51, it is possible for VACUUM to
ignore certain transactions that are executing CREATE INDEX CONCURRENTLY
and REINDEX CONCURRENTLY for the purposes of computing Xmin; that's
because we know those transactions are not going to examine any other
tables, and are not going to execute anything else in the same
transaction. (Only operations on "safe" indexes can be ignored: those
on indexes that are neither partial nor expressional).
This is extremely useful in cases where CIC/RC can run for a very long
time, because that used to be a significant headache for concurrent
vacuuming of other tables.
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20210115133858.GA18931@alvherre.pgsql
We don't have anything to decode in a transaction if ReorderBufferTXN
doesn't exist by the time we decode the commit prepared. So don't create a
new ReorderBufferTXN here. This is an oversight in commit a271a1b5.
Reported-by: Markus Wanner
Discussion: https://postgr.es/m/dbec82e2-dbd7-95a2-c6b6-e488cbbdf853@bluegap.ch
The authentication failure error message wasn't distinguishing whether
it is a physical replication or logical replication connection failure and
was giving incomplete information on what led to failure in case of logical
replication connection.
Author: Paul Martinez and Amit Kapila
Reviewed-by: Euler Taveira and Amit Kapila
Discussion: https://postgr.es/m/CACqFVBYahrAi2OPdJfUA3YCvn3QMzzxZdw0ibSJ8wouWeDtiyQ@mail.gmail.com
Pavan Deolasee recently noted that a few of the
HeapTupleHeaderIndicatesMovedPartitions calls added by commit
5db6df0c01 are useless, since they are done after comparing t_self
with t_ctid. But because t_self can never be set to the magical values
that indicate that the tuple moved partition, this can never succeed: if
the first test fails (so we know t_self equals t_ctid), necessarily the
second test will also fail.
So these checks can be removed and no harm is done. There's no bug
here, just a code legibility issue.
Reported-by: Pavan Deolasee <pavan.deolasee@gmail.com>
Discussion: https://postgr.es/m/20200929164411.GA15497@alvherre.pgsql
The code paths for three different OSes finished up with three different
ways of excluding C[.xxx] and POSIX from consideration. Merge them.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20210117215940.GE8560%40telsasoft.com
Instead of an unsightly internal "cache lookup failed" message, just
return NULL for bad OIDs, as is the convention for other similar things.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20210117215940.GE8560%40telsasoft.com
Commit 46d6e5f567 added the atomic variable "waitStart" into PGPROC struct,
to store the time at which wait for lock acquisition started. Previously
this variable was initialized every time each backend started. Instead,
this commit makes postmaster initialize it at the startup, to ensure that
the variable should be initialized before any use of it.
This commit also moves the code to initialize "waitStart" variable for
prepare transaction, from TwoPhaseGetDummyProc() to MarkAsPreparingGuts().
Because MarkAsPreparingGuts() is more proper place to do that since
it initializes other PGPROC variables.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi
Discussion: https://postgr.es/m/1df88660-6f08-cc6e-b7e2-f85296a2bdab@oss.nttdata.com
For the error message "every hash partition modulus must be a factor
of the next larger modulus", add a detail message that shows the
particular numbers and existing partition involved. Also comment the
code more.
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/bb9d60b4-aadb-607a-1a9d-fdc3434dddcd%40enterprisedb.com
This commit changes one code path in REINDEX INDEX and one code path
in CREATE INDEX CONCURRENTLY to report the progress of each operation
using pgstat_progress_update_multi_param() rather than
multiple calls to pgstat_progress_update_param(). This has the
advantage to make the progress report more consistent to the end-user
without impacting the amount of information provided.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACV5zW7GxD8D_tyO==bcj6ZktQchEKWKPBOAGKiLhAQo=w@mail.gmail.com
Coverity complained that functions in regexec.c might leak DFA
storage. It's wrong, but this logic is confusing enough that it's
not so surprising Coverity couldn't make sense of it. Rewrite
in hopes of making it more legible to humans as well as machines.
Previously, each pair of capturing parentheses gave rise to a separate
subre tree node, whose only function was to identify that we ought to
capture the match details for this particular sub-expression. In
most cases we don't really need that, since we can perfectly well
put a "capture this" annotation on the child node that does the real
matching work. As with the two preceding commits, the main value
of this is to avoid generating and optimizing an NFA for a tree node
that's not really pulling its weight.
The chosen data representation only allows one capture annotation
per subre node. In the legal-per-spec, but seemingly not very useful,
case where there are multiple capturing parens around the exact same
bit of the regex (i.e. "((xyz))"), wrap the child node in N-1 capture
nodes that act the same as before. We could work harder at that but
I'll refrain, pending some evidence that such cases are worth troubling
over.
In passing, improve the comments in regex.h to say what all the
different re_info bits mean. Some of them were pretty obvious
but others not so much, so reverse-engineer some documentation.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
Instead of having left and right child links in subre structs,
have a single child link plus a sibling link. Multiple children
of a tree node are now reached by chasing the sibling chain.
The beneficiary of this is alternation tree nodes. A regular
expression with N (>1) branches is now represented by one alternation
node with N children, rather than a tree that includes N alternation
nodes as well as N children. While the old representation didn't
really cost anything extra at execution time, it was pretty horrid
for compilation purposes, because each of the alternation nodes had
its own NFA, which we were too stupid not to separately optimize.
(To make matters worse, all of those NFAs described the entire
alternation pattern, not just the portion of it that one might
expect from the tree structure.)
We continue to require concatenation nodes to have exactly two
children. This data structure is now prepared to support more,
but the executor's logic would need some careful redesign, and
it's not clear that a lot of benefit could be had.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
The comment for parsebranch() claims that it avoids generating
unnecessary concatenation nodes in the "subre" tree, but it missed
some significant cases. Once we've decided that a given atom is
"messy" and can't be bundled with the preceding atom(s) of the
current regex branch, parseqatom() always generated two new concat
nodes, one to concat the messy atom to what follows it in the branch,
and an upper node to concatenate the preceding part of the branch
to that one. But one or both of these could be unnecessary, if the
messy atom is the first, last, or only one in the branch. Improve
the code to suppress such useless concat nodes, along with the
no-op child nodes representing empty chunks of a branch.
Reducing the number of subre tree nodes offers significant savings
not only at execution but during compilation, because each subre node
has its own NFA that has to be separately optimized. (Maybe someday
we'll figure out how to share the optimization work across multiple
tree nodes, but it doesn't look easy.) Eliminating upper tree nodes
is especially useful because they tend to have larger NFAs.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
This builds on the previous "rainbow" patch to detect NFAs that will
match any string, though possibly with constraints on the string length.
This definition is chosen to match constructs such as ".*", ".+", and
".{1,100}". Recognizing such an NFA after the optimization pass is
fairly cheap, since we basically just have to verify that all arcs
are RAINBOW arcs and count the number of steps to the end state.
(Well, there's a bit of complication with pseudo-color arcs for string
boundary conditions, but not much.)
Once we have these markings, the regex executor functions longest(),
shortest(), and matchuntil() don't have to expend per-character work
to determine whether a given substring satisfies such an NFA; they
just need to check its length against the bounds. Since some matching
problems require O(N) invocations of these functions, we've reduced
the runtime for an N-character string from O(N^2) to O(N). Of course,
this is no help for non-matchall sub-patterns, but those usually have
constraints that allow us to avoid needing O(N) substring checks in the
first place. It's precisely the unconstrained "match-all" cases that
cause the most headaches.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
Some regular expression constructs, most notably the "." match-anything
metacharacter, produce a sheaf of parallel NFA arcs covering all
possible colors (that is, character equivalence classes). We can make
a noticeable improvement in the space and time needed to process large
regexes by replacing such cases with a single arc bearing the special
color code "RAINBOW". This requires only minor additional complication
in places such as pull() and push().
Callers of pg_reg_getoutarcs() must now be prepared for the possibility
of seeing a RAINBOW arc. For the one known user, contrib/pg_trgm,
that's a net benefit since it cuts the number of arcs to be dealt with,
and the handling isn't any different than for other colors that contain
too many characters to be dealt with individually.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
When ON_ERROR_ROLLBACK is enabled, psql releases a temporary savepoint
if it's idle in a valid transaction block after executing a query. But psql
doesn't do that after RELEASE or ROLLBACK is executed because a temporary
savepoint has already been destroyed in that case.
This commit changes psql's ON_ERROR_ROLLBACK so that it doesn't release
a temporary savepoint also when COMMIT AND CHAIN is executed. A temporary
savepoint doesn't need to be released in that case because
COMMIT AND CHAIN also destroys any savepoints defined within the transaction
to commit. Otherwise psql tries to release the savepoint that
COMMIT AND CHAIN has already destroyed and cause an error
"ERROR: savepoint "pg_psql_temporary_savepoint" does not exist".
Back-patch to v12 where transaction chaining was added.
Reported-by: Arthur Nascimento
Author: Arthur Nascimento
Reviewed-by: Fujii Masao, Vik Fearing
Discussion: https://postgr.es/m/16867-3475744069228158@postgresql.org
This commit fixes COMMIT AND CHAIN command so that it starts new transaction
immediately even if savepoints are defined within the transaction to commit.
Previously COMMIT AND CHAIN command did not in that case because
commit 280a408b48 forgot to make CommitTransactionCommand() handle
a transaction chaining when the transaction state was TBLOCK_SUBCOMMIT.
Also this commit adds the regression test for COMMIT AND CHAIN command
when savepoints are defined.
Back-patch to v12 where transaction chaining was added.
Reported-by: Arthur Nascimento
Author: Fujii Masao
Reviewed-by: Arthur Nascimento, Vik Fearing
Discussion: https://postgr.es/m/16867-3475744069228158@postgresql.org
Consolidate discussion of how VACUUM places pages in the FSM for
recycling by adding a new section that comes after discussion of page
deletion. This structure reflects the fact that page recycling is
explicitly decoupled from page deletion in Lanin & Shasha's paper. Page
recycling in nbtree is an implementation of what the paper calls "the
drain technique".
This decoupling is an important concept for nbtree VACUUM. Searchers
have to detect and recover from concurrent page deletions, but they will
never have to reason about concurrent page recycling. Recycling can
almost always be thought of as a low level garbage collection operation
that asynchronously frees the physical space that backs a logical tree
node. Almost all code need only concern itself with logical tree nodes.
(Note that "logical tree node" is not currently a term of art in the
nbtree code -- this all works implicitly.)
This is preparation for an upcoming patch that teaches nbtree VACUUM to
remember the details of pages that it deletes on the fly, in local
memory. This enables the same VACUUM operation to consider placing its
own deleted pages in the FSM later on, when it reaches the end of
btvacuumscan().
While poking at the regex code, I happened to notice that the bug
squashed in commit afcc8772e had a sibling: next() failed to return
a specific value associated with the '}' token for a "\{m,n\}"
quantifier when parsing in basic RE mode. Again, this could result
in treating the quantifier as non-greedy, which it never should be in
basic mode. For that to happen, the last character before "\}" that
sets "nextvalue" would have to set it to zero, or it'd have to have
accidentally been zero from the start. The failure can be provoked
repeatably with, for example, a bound ending in digit "0".
Like the previous patch, back-patch all the way.
Commit 2c8dd05d6c added the atomic variable writtenUpto into
walreceiver's shared memory information. It's initialized only
when walreceiver started up but could be read via pg_stat_wal_receiver
view anytime, i.e., even before it's initialized. In the server built
with --disable-atomics and --disable-spinlocks, this uninitialized
atomic variable read could cause "invalid spinlock number: 0" error.
This commit changed writtenUpto so that it's initialized at
the postmaster startup, to avoid the uninitialized variable read
via pg_stat_wal_receiver and fix the error.
Also this commit moved the read of writtenUpto after the release
of spinlock protecting walreceiver's shared variables. This is
necessary to prevent new spinlock from being taken by atomic
variable read while holding another spinlock, and to shorten
the spinlock duration. This change leads writtenUpto not to be
consistent with the other walreceiver's shared variables protected
by a spinlock. But this is OK because writtenUpto should not be
used for data integrity checks.
Back-patch to v13 where commit 2c8dd05d6c introduced the bug.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/7ef8708c-5b6b-edd3-2cf2-7783f1c7c175@oss.nttdata.com
Add another method to specify CRLs, hashed directory method, for both
server and client side. This offers a means for server or libpq to
load only CRLs that are required to verify a certificate. The CRL
directory is specifed by separate GUC variables or connection options
ssl_crl_dir and sslcrldir, alongside the existing ssl_crl_file and
sslcrl, so both methods can be used at the same time.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/20200731.173911.904649928639357911.horikyota.ntt@gmail.com
Discuss VACUUM's linear scan after discussion of tuple deletion by
VACUUM, but before discussion of page deletion by VACUUM. This
progression is a lot more natural.
Also tweak the wording a little. It seems unnecessary to talk about how
it worked prior to PostgreSQL 8.2.
A cross-partition update on a partitioned table is implemented as a
delete followed by an insert. With foreign partitions, this was however
causing issues, because the FDW and core may disagree on when to enable
batching. postgres_fdw was only allowing batching for plain inserts
(CMD_INSERT) while core was trying to batch the insert component of the
cross-partition update. Fix by restricting core to apply batching only
to plain CMD_INSERT queries.
It's possible to allow batching for cross-partition updates, but that
will require more extensive changes, so better to leave that for a
separate patch.
Author: Amit Langote
Reviewed-by: Tomas Vondra, Takayuki Tsunakawa
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
Push some hopefully-uncontroversial bits extracted from an upcoming
patch series, to remove non-relevant clutter from the main patches.
In compact(), return immediately after setting REG_ASSERT error;
continuing the loop would just lead to assertion failure below.
(Ask me how I know.)
In parseqatom(), remove assertion that moresubs() did its job.
When moresubs actually did its job, this is redundant with that
function's final assert; but when it failed on OOM, this is an
assertion crash. We could avoid the crash by adding a NOERR()
check before the assertion, but it seems better to subtract code
than add it. (Note that there's a NOERR exit a few lines further
down, and nothing else between here and there requires moresubs
to have succeeded. So we don't really need an extra error exit.)
This is a live bug in assert-enabled builds, but given the very
low likelihood of OOM in moresub's tiny allocation, I don't think
it's worth back-patching.
On the other hand, it seems worthwhile to add an assertion that
our intended v->subs[subno] target is still null by the time we
are ready to insert into it, since there's a recursion in between.
In pg_regexec, ensure we fflush any debug output on the way out,
and try to make MDEBUG messages more uniform and helpful. (In
particular, ensure that all of them are prefixed with the subre's
id number, so one can match up entry and exit reports.)
Add some test cases in test_regex to improve coverage of lookahead
and lookbehind constraints. Adding these now is mainly to establish
that this is indeed the existing behavior.
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
Several information schema views track dependencies between
functions/procedures and objects used by them. These had not been
implemented so far because PostgreSQL doesn't track objects used in a
function body. However, formally, these also show dependencies used
in parameter default expressions, which PostgreSQL does support and
track. So for the sake of completeness, we might as well add these.
If dependency tracking for function bodies is ever implemented, these
views will automatically work correctly.
Reviewed-by: Erik Rijkers <er@xs4all.nl>
Discussion: https://www.postgresql.org/message-id/flat/ac80fc74-e387-8950-9a31-2560778fc1e3%40enterprisedb.com
Peter Eisentraut
Tom Lane
Thomas Munro
Peter Geoghegan
Fujii Masao
Amit Kapila
Michael Paquier
Alvaro Herrera
Tomas Vondra