The timestamp generated by the standby at message transmission has been
included in the protocol since its introduction for both the status
update message and hot standby feedback message, but it has never
appeared in pg_stat_replication. Seeing this timestamp does not matter
much with a cluster which has a lot of activity, but on a mostly-idle
cluster, this makes monitoring able to react faster than the configured
timeouts.
Author: MyungKyu LIM
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/1657809367.407321.1533027417725.JavaMail.jboss@ep2ml404
When decoding a TRUNCATE record, the relids array was being allocated in
the main ReorderBuffer memory context, but not released with the change
resulting in a memory leak.
The array was also ignored when serializing/deserializing the change,
assuming all the information is stored in the change itself. So when
spilling the change to disk, we've only we have serialized only the
pointer to the relids array. Thanks to never releasing the array,
the pointer however remained valid even after loading the change back
to memory, preventing an actual crash.
This fixes both the memory leak and (de)serialization. The relids array
is still allocated in the main ReorderBuffer memory context (none of the
existing ones seems like a good match, and adding an extra context seems
like an overkill). The allocation is wrapped in a new ReorderBuffer API
functions, to keep the details within reorderbuffer.c, just like the
other ReorderBufferGet methods do.
Author: Tomas Vondra
Discussion: https://www.postgresql.org/message-id/flat/66175a41-9342-2845-652f-1bd4c3ee50aa%402ndquadrant.com
Backpatch: 11, where decoding of TRUNCATE was introduced
Since the old logic was completely unaware of subtransactions, a
change made in a subsequently-aborted subtransaction would still cause
workers to be stopped at toplevel transaction commit. Fix that by
managing a stack of worker lists rather than just one.
Amit Khandekar and Robert Haas
Discussion: http://postgr.es/m/CAJ3gD9eaG_mWqiOTA2LfAug-VRNn1hrhf50Xi1YroxL37QkZNg@mail.gmail.com
Two closely related bugs are fixed. First, xmin of logical slots was
advanced too early. During xl_running_xacts processing, xmin of the
slot was set to the oldest running xid in the record, but that's wrong:
actually, snapshots which will be used for not-yet-replayed transactions
might consider older txns as running too, so we need to keep xmin back
for them. The problem wasn't noticed earlier because DDL which allows
to delete tuple (set xmax) while some another not-yet-committed
transaction looks at it is pretty rare, if not unique: e.g. all forms of
ALTER TABLE which change schema acquire ACCESS EXCLUSIVE lock
conflicting with any inserts. The included test case (test_decoding's
oldest_xmin) uses ALTER of a composite type, which doesn't have such
interlocking.
To deal with this, we must be able to quickly retrieve oldest xmin
(oldest running xid among all assigned snapshots) from ReorderBuffer. To
fix, add another list of ReorderBufferTXNs to the reorderbuffer, where
transactions are sorted by base-snapshot-LSN. This is slightly
different from the existing (sorted by first-LSN) list, because a
transaction can have an earlier LSN but a later Xmin, if its first
record does not obtain an xmin (eg. xl_xact_assignment). Note this new
list doesn't fully replace the existing txn list: we still need that one
to prevent WAL recycling.
The second issue concerns SnapBuilder snapshots and subtransactions.
SnapBuildDistributeNewCatalogSnapshot never assigned a snapshot to a
transaction that is known to be a subtxn, which is good in the common
case that the top-level transaction already has one (no point in doing
so), but a bug otherwise. To fix, arrange to transfer the snapshot from
the subtxn to its top-level txn as soon as the kinship gets known.
test_decoding's snapshot_transfer verifies this.
Also, fix a minor memory leak: refcount of toplevel's old base snapshot
was not decremented when the snapshot is transferred from child.
Liberally sprinkle code comments, and rewrite a few existing ones. This
part is my (Álvaro's) contribution to this commit, as I had to write all
those comments in order to understand the existing code and Arseny's
patch.
Reported-by: Arseny Sher <a.sher@postgrespro.ru>
Diagnosed-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/87lgdyz1wj.fsf@ars-thinkpad
While debugging issues on HEAD for the new slot forwarding feature of
Postgres 11, some monitoring of the code surrounding in-memory slot data
has proved that the lock handling may cause inconsistent data to be read
by read-only callers of slot functions, particularly
pg_get_replication_slots() which fetches data for the system view
pg_replication_slots, or modules looking directly at slot information.
The code paths involved in those problems concern logical decoding
initialization (down to 9.4) and WAL reservation for slots (new as of
10).
A set of comments documenting all the lock handlings, particularly the
dependency with LW locks for slots and the in_use flag as well as the
internal mutex lock is added, based on a suggested by Simon Riggs.
Some of the fixed code exists down to 9.4 where WAL decoding has been
introduced, but as those race conditions are really unlikely going to
happen as those concern code paths for slot and decoding creation, just
fix the problem on HEAD.
Author: Michael Paquier
Discussion: https://postgr.es/m/20180528085747.GA27845@paquier.xyz
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
So far as I can find, NI_MAXHOST isn't actually required anywhere by
POSIX. Nonetheless, commit 9a895462d supposed that it could rely on
having that symbol without any ceremony at all. We do have a hack
for providing it if the platform doesn't, in getaddrinfo.h, so fix
the problem by #including that file. Per buildfarm.
Previously there was no way in the standby side to find out the host and port
of the sender server that the walreceiver was currently connected to when
multiple hosts and ports were specified in primary_conninfo. For that purpose,
this patch adds sender_host and sender_port columns into pg_stat_wal_receiver
view. They report the host and port that the active replication connection
currently uses.
Bump catalog version.
Author: Haribabu Kommi
Reviewed-by: Michael Paquier and me
Discussion: https://postgr.es/m/CAJrrPGcV_aq8=cdqkFhVDJKEnDQ70yRTTdY9RODzMnXNrCz2Ow@mail.gmail.com
Logical decoding should not publish anything about tables created as
part of a heap rewrite during DDL. Those tables don't exist externally,
so consumers of logical decoding cannot do anything sensible with that
information. In ab28feae2b, we worked
around this for built-in logical replication, but that was hack.
This is a more proper fix: We mark such transient heaps using the new
field pg_class.relwrite, linking to the original relation OID. By
default, we ignore them in logical decoding before they get to the
output plugin. Optionally, a plugin can register their interest in
getting such changes, if they handle DDL specially, in which case the
new field will help them get information about the actual table.
Reviewed-by: Craig Ringer <craig@2ndquadrant.com>
The logical replication type map seems to have been misused by its only
caller -- it would try to use the remote OID as input for local type
routines, which unsurprisingly could result in bogus "cache lookup
failed for type XYZ" errors, or random other type names being picked up
if they happened to use the right OID. Fix that, changing
Oid logicalrep_typmap_getid(Oid remoteid) to
char *logicalrep_typmap_gettypname(Oid remoteid)
which is more useful. If the remote type is not part of the typmap,
this simply prints "unrecognized type" instead of choking trying to
figure out -- a pointless exercise (because the only input for that
comes from replication messages, which are not under the local node's
control) and dangerous to boot, when called from within an error context
callback.
Once that is done, it comes to light that the local OID in the typmap
entry was not being used for anything; the type/schema names are what we
need, so remove local type OID from that struct.
Once you do that, it becomes pointless to attach a callback to regular
syscache invalidation. So remove that also.
Reported-by: Dang Minh Huong
Author: Masahiko Sawada
Reviewed-by: Álvaro Herrera, Petr Jelínek, Dang Minh Huong, Atsushi Torikoshi
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A6BE964@BPXM05GP.gisp.nec.co.jp
Discussion: https://postgr.es/m/75DB81BEEA95B445AE6D576A0A5C9E936A6C4B0A@BPXM05GP.gisp.nec.co.jp
Ability to advance both physical and logical replication slots using a
new user function pg_replication_slot_advance().
For logical advance that means records are consumed as fast as possible
and changes are not given to output plugin for sending. Makes 2nd phase
(after we reached SNAPBUILD_FULL_SNAPSHOT) of replication slot creation
faster, especially when there are big transactions as the reorder buffer
does not have to deal with data changes and does not have to spill to
disk.
Author: Petr Jelinek
Reviewed-by: Simon Riggs
Logical decoding's reorderbuffer.c may spill transaction files to disk
when transactions are large. These are supposed to be removed when they
become "too old" by xid; but file removal requires the boundary LSNs of
the transaction to be known. The final_lsn is only set when we see the
commit or abort record for the transaction, but nothing sets the value
for transactions that crash, so the removal code misbehaves -- in
assertion-enabled builds, it crashes by a failed assertion.
To fix, modify the final_lsn of transactions that don't have a value
set, to the LSN of the very latest change in the transaction. This
causes the spilled files to be removed appropriately.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro HORIGUCHI, Craig Ringer, Masahiko Sawada
Discussion: https://postgr.es/m/54e4e488-186b-a056-6628-50628e4e4ebc@lab.ntt.co.jp
Add new style of memory allocator, known as Generational
appropriate for use in cases where memory is allocated
and then freed in roughly oldest first order (FIFO).
Use new allocator for logical decoding’s reorderbuffer
to significantly reduce memory usage and improve performance.
Author: Tomas Vondra
Reviewed-by: Simon Riggs
Commit 597a87ccc introduced a latch pointer variable to replace use
of a long-lived shared latch in the shared WalRcvData structure.
This was not well thought out, because there are now hazards of the
pointer variable changing while it's being inspected by another
process. This could obviously lead to a core dump in code like
if (WalRcv->latch)
SetLatch(WalRcv->latch);
and there's a more remote risk of a torn read, if we have any
platforms where reading/writing a pointer is not atomic.
An actual problem would occur only if the walreceiver process
exits (gracefully) while the startup process is trying to
signal it, but that seems well within the realm of possibility.
To fix, treat the pointer variable (not the referenced latch)
as being protected by the WalRcv->mutex spinlock. There
remains a race condition that we could apply SetLatch to a
process latch that no longer belongs to the walreceiver, but
I believe that's harmless: at worst it'd cause an extra wakeup
of the next process to use that PGPROC structure.
Back-patch to v10 where the faulty code was added.
Discussion: https://postgr.es/m/22735.1507048202@sss.pgh.pa.us
Similar to what was fixed in commit 9915de6c1c for replication slots,
but this time it's related to replication origins: DROP SUBSCRIPTION
attempts to drop the replication origin, but that fails if the
replication worker process hasn't yet marked it unused. This causes
failures in the buildfarm:
ERROR: could not drop replication origin with OID 1, in use by PID 34069
Like the aforementioned commit, fix by having the process running DROP
SUBSCRIPTION sleep until the worker marks the the replication origin
struct as free. This uses a condition variable on each replication
origin shmem state struct, so that the session trying to drop can sleep
and expect to be awakened by the process keeping the origin open.
Also fix a SGML markup in the previous commit.
Discussion: https://postgr.es/m/20170808001433.rozlseaf4m2wkw3n@alvherre.pgsql
It is relatively easy to get a replication slot to look as still active
while one process is in the process of getting rid of it; when some
other process tries to "acquire" the slot, it would fail with an error
message of "replication slot XYZ is active for PID N".
The error message in itself is fine, except that when the intention is
to drop the slot, it is unhelpful: the useful behavior would be to wait
until the slot is no longer acquired, so that the drop can proceed. To
implement this, we use a condition variable so that slot acquisition can
be told to wait on that condition variable if the slot is already
acquired, and we make any change in active_pid broadcast a signal on the
condition variable. Thus, as soon as the slot is released, the drop
will proceed properly.
Reported by: Tom Lane
Discussion: https://postgr.es/m/11904.1499039688@sss.pgh.pa.us
Authors: Petr Jelínek, Álvaro Herrera
In WAL receiver and WAL server, some accesses to their corresponding
shared memory control structs were done without holding any kind of
lock, which could lead to inconsistent and possibly insecure results.
In walsender, fix by clarifying the locking rules and following them
correctly, as documented in the new comment in walsender_private.h;
namely that some members can be read in walsender itself without a lock,
because the only writes occur in the same process. The rest of the
struct requires spinlock for accesses, as usual.
In walreceiver, fix by always holding spinlock while accessing the
struct.
While there is potentially a problem in all branches, it is minor in
stable ones. This only became a real problem in pg10 because of quorum
commit in synchronous replication (commit 3901fd70cc), and a potential
security problem in walreceiver because a superuser() check was removed
by default monitoring roles (commit 25fff40798). Thus, no backpatch.
In passing, clean up some leftover braces which were used to create
unconditional blocks. Once upon a time these were used for
volatile-izing accesses to those shmem structs, which is no longer
required. Many other occurrences of this pattern remain.
Author: Michaël Paquier
Reported-by: Michaël Paquier
Reviewed-by: Masahiko Sawada, Kyotaro Horiguchi, Thomas Munro,
Robert Haas
Discussion: https://postgr.es/m/CAB7nPqTWYqtzD=LN_oDaf9r-hAjUEPAy0B9yRkhcsLdRN8fzrw@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
When, during logical decoding, a transaction gets too big, it's
contents get spilled to disk. Not just the top-transaction gets
spilled, but *also* all of its subtransactions, even if they're not
that large themselves. Unfortunately we didn't clean up
such small spilled subtransactions from disk.
Fix that, by keeping better track of whether a transaction has been
spilled to disk.
Author: Andres Freund
Reported-By: Dmitriy Sarafannikov, Fabrízio de Royes Mello
Discussion:
https://postgr.es/m/1457621358.355011041@f382.i.mail.ruhttps://postgr.es/m/CAFcNs+qNMhNYii4nxpO6gqsndiyxNDYV0S=JNq0v_sEE+9PHXg@mail.gmail.com
Backpatch: 9.4-, where logical decoding was introduced
Previously the exit handling was only able to exit from within the
main loop, and not from within the backend code it calls. Fix that by
using the standard die() SIGTERM handler, and adding the necessary
CHECK_FOR_INTERRUPTS() call.
This requires adding yet another process-type-specific branch to
ProcessInterrupts(), which hints that we probably should generalize
that handling. But that's work for another day.
Author: Petr Jelinek
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/fe072153-babd-3b5d-8052-73527a6eb657@2ndquadrant.com
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and
throws a PANIC if so. At that point, only walsenders are still
active, so one might think this could not happen, but walsenders can
also generate WAL, for instance in BASE_BACKUP and logical decoding
related commands (e.g. via hint bits). So they can trigger this panic
if such a command is run while the shutdown checkpoint is being
written.
To fix this, divide the walsender shutdown into two phases. First,
checkpointer, itself triggered by postmaster, sends a
PROCSIG_WALSND_INIT_STOPPING signal to all walsenders. If the backend
is idle or runs an SQL query this causes the backend to shutdown, if
logical replication is in progress all existing WAL records are
processed followed by a shutdown. Otherwise this causes the walsender
to switch to the "stopping" state. In this state, the walsender will
reject any further replication commands. The checkpointer begins the
shutdown checkpoint once all walsenders are confirmed as
stopping. When the shutdown checkpoint finishes, the postmaster sends
us SIGUSR2. This instructs walsender to send any outstanding WAL,
including the shutdown checkpoint record, wait for it to be replicated
to the standby, and then exit.
Author: Andres Freund, based on an earlier patch by Michael Paquier
Reported-By: Fujii Masao, Andres Freund
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
Backpatch: 9.4, where logical decoding was introduced
This reverts commit 086221cf6b, which
was made to master only.
The approach implemented in the above commit has some issues. While
those could easily be fixed incrementally, doing so would make
backpatching considerably harder, so instead first revert this patch.
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
The logical replication worker processes now use the normal die()
handler for SIGTERM and CHECK_FOR_INTERRUPTS() instead of custom code.
One problem before was that the apply worker would not exit promptly
when a subscription was dropped, which could lead to deadlocks.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
The snapshot assembly during the creation of logical slots relied
waiting for transactions in xl_running_xacts to end, by checking for
their commit/abort records. Unfortunately, despite locking, it is
possible to see an xl_running_xact record listing transactions as
ready, that have already WAL-logged an commit/abort record, as the
locking just prevents the ProcArray to be adjusted, and the commit
record has to be logged first.
That lead to either delayed or hanging snapshot creation, because
snapbuild.c would wait "forever" to see commit/abort records for some
transactions. That hang resolved only if a xl_running_xacts record
without any running transactions happened to be logged, far from
certain on a busy server.
It's impractical to prevent that via more heavyweight locking, the
likelihood of deadlocks and significantly increased contention would
be too big.
Instead change the initial snapshot creation to be solely based on
tracking the oldest running transaction via
xl_running_xacts->oldestRunningXid - that actually ends up
significantly simplifying the code. That has two disadvantages:
1) Because we cannot fully "trust" the contents of xl_running_xacts,
we cannot use it to build the initial snapshot. Instead we have to
wait twice for all running transactions to finish.
2) Previously a slot, unless the race occurred, could be created when
the all transaction perceived as running based on commit/abort
records, now we have to wait for the next xl_running_xacts record.
To address that, trigger logging new xl_running_xacts record from
within snapbuild.c exactly when necessary.
Unfortunately snabuild.c's SnapBuild is stored on disk, one of the
stupider ideas of a certain Mr Freund, so we can't change it in a
minor release. As this is going to be backpatched, we have to hack
around a bit to keep on-disk compatibility. A later commit will
rejigger that on master.
Author: Andres Freund, based on a quite different patch from Petr Jelinek
Analyzed-By: Petr Jelinek
Reviewed-By: Petr Jelinek
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backpatch: 9.4-, where logical decoding has been introduced
Lag tracking is called for each commit, but we introduce
a pacing delay to ensure we don't swamp the lag tracker.
Author: Petr Jelinek, with minor pacing delay code from me
Previously, the memory used by the logical replication apply worker for
processing messages would never be freed, so that could end up using a
lot of memory. To improve that, change the existing ApplyContext memory
context to ApplyMessageContext and reset that after every
message (similar to MessageContext used elsewhere). For consistency of
naming, rename the ApplyCacheContext to ApplyContext.
Author: Stas Kelvich <s.kelvich@postgrespro.ru>
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and throws
a PANIC if so. At that point, only walsenders are still active, so one
might think this could not happen, but walsenders can also generate WAL,
for instance in BASE_BACKUP and certain variants of
CREATE_REPLICATION_SLOT. So they can trigger this panic if such a
command is run while the shutdown checkpoint is being written.
To fix this, divide the walsender shutdown into two phases. First, the
postmaster sends a SIGUSR2 signal to all walsenders. The walsenders
then put themselves into the "stopping" state. In this state, they
reject any new commands. (For simplicity, we reject all new commands,
so that in the future we do not have to track meticulously which
commands might generate WAL.) The checkpointer waits for all walsenders
to reach this state before proceeding with the shutdown checkpoint.
After the shutdown checkpoint is done, the postmaster sends
SIGINT (previously unused) to the walsenders. This triggers the
existing shutdown behavior of sending out the shutdown checkpoint record
and then terminating.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
After the logical replication launcher was told to wake up at
commit (for example, by a CREATE SUBSCRIPTION command), the flag to wake
up was not reset, so it would be woken up at every following commit as
well. So fix that by resetting the flag.
Also, we don't need to wake up anything if the transaction was rolled
back. Just reset the flag in that case.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
Logical decoding stores historical snapshots on disk, so that logical
decoding can restart without having to reconstruct a snapshot from
scratch (for which the resources are not guaranteed to be present
anymore). These serialized snapshots were also used when creating a
new slot via the walsender interface, which can export a "full"
snapshot (i.e. one that can read all tables, not just catalog ones).
The problem is that the serialized snapshots are only useful for
catalogs and not for normal user tables. Thus the use of such a
serialized snapshot could result in an inconsistent snapshot being
exported, which could lead to queries returning wrong data. This
would only happen if logical slots are created while another logical
slot already exists.
Author: Petr Jelinek
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backport: 9.4, where logical decoding was introduced.
The logical decoding machinery already preserved all the required
catalog tuples, which is sufficient in the course of normal logical
decoding, but did not guarantee that non-catalog tuples were preserved
during computation of the initial snapshot when creating a slot over
the replication protocol.
This could cause a corrupted initial snapshot being exported. The
time window for issues is usually not terribly large, but on a busy
server it's perfectly possible to it hit it. Ongoing decoding is not
affected by this bug.
To avoid increased overhead for the SQL API, only retain additional
tuples when a logical slot is being created over the replication
protocol. To do so this commit changes the signature of
CreateInitDecodingContext(), but it seems unlikely that it's being
used in an extension, so that's probably ok.
In a drive-by fix, fix handling of
ReplicationSlotsComputeRequiredXmin's already_locked argument, which
should only apply to ProcArrayLock, not ReplicationSlotControlLock.
Reported-By: Erik Rijkers
Analyzed-By: Petr Jelinek
Author: Petr Jelinek, heavily editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/9a897b86-46e1-9915-ee4c-da02e4ff6a95@2ndquadrant.com
Backport: 9.4, where logical decoding was introduced.
The code was originally written with assumption that launcher is the
only process starting the worker. However that hasn't been true since
commit 7c4f52409 which failed to modify the worker management code
adequately.
This patch adds an in_use field to the LogicalRepWorker struct to
indicate whether the worker slot is being used and uses proper locking
everywhere this flag is set or read.
However if the parent process dies while the new worker is starting and
the new worker fails to attach to shared memory, this flag would never
get cleared. We solve this rare corner case by adding a sort of garbage
collector for in_use slots. This uses another field in the
LogicalRepWorker struct named launch_time that contains the time when
the worker was started. If any request to start a new worker does not
find free slot, we'll check for workers that were supposed to start but
took too long to actually do so, and reuse their slot.
In passing also fix possible race conditions when stopping a worker that
hasn't finished starting yet.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
* Be sure to reset the launcher's pid (LogicalRepCtx->launcher_pid) to 0
even when the launcher emits an error.
* Declare ApplyLauncherWakeup() as a static function because it's called
only in launcher.c.
* Previously IsBackendPId() was used to check whether the launcher's pid
was valid. IsBackendPid() was necessary because there was the bug where
the launcher's pid was not reset to 0. But now it's fixed, so IsBackendPid()
is not necessary and this patch removes it.
Author: Masahiko Sawada
Reviewed-by: Kyotaro Horiguchi
Reported-by: Fujii Masao
Discussion: http://postgr.es/m/CAHGQGwFDWh_Qr-q_GEMpD+qH=vYPMdVqw=ZOSY3kX_Pna9R9SA@mail.gmail.com
Automatically drop all logical replication slots associated with a
database when the database is dropped. Previously we threw an ERROR
if a slot existed. Now we throw ERROR only if a slot is active in
the database being dropped.
Craig Ringer
Bruce Momjian
Michael Paquier
Magnus Hagander
Tomas Vondra
Robert Haas
Andrew Dunstan
Alvaro Herrera
Tom Lane
Peter Eisentraut
Fujii Masao
Simon Riggs
Andres Freund