of tuples when passing data up through multiple plan nodes. A slot can now
hold either a normal "physical" HeapTuple, or a "virtual" tuple consisting
of Datum/isnull arrays. Upper plan levels can usually just copy the Datum
arrays, avoiding heap_formtuple() and possible subsequent nocachegetattr()
calls to extract the data again. This work extends Atsushi Ogawa's earlier
patch, which provided the key idea of adding Datum arrays to TupleTableSlots.
(I believe however that something like this was foreseen way back in Berkeley
days --- see the old comment on ExecProject.) A test case involving many
levels of join of fairly wide tables (about 80 columns altogether) showed
about 3x overall speedup, though simple queries will probably not be
helped very much.
I have also duplicated some code in heaptuple.c in order to provide versions
of heap_formtuple and friends that use "bool" arrays to indicate null
attributes, instead of the old convention of "char" arrays containing either
'n' or ' '. This provides a better match to the convention used by
ExecEvalExpr. While I have not made a concerted effort to get rid of uses
of the old routines, I think they should be deprecated and eventually removed.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
plain SUSET instead. Also delay processing of options received in
client connection request until after we know if the user is a superuser,
so that SUSET values can be set that way by legitimate superusers.
Per recent discussion.
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
executed. Previously, the DECLARE would succeed but subsequent FETCHes
would fail since the parameter values supplied to DECLARE were not
propagated to the portal created for the cursor.
In support of this, add type Oids to ParamListInfo entries, which seems
like a good idea anyway since code that extracts a value can double-check
that it got the type of value it was expecting.
Oliver Jowett, with minor editorialization by Tom Lane.
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
until Bind is received, so that actual parameter values are visible to the
planner. Make use of the parameter values for estimation purposes (but
don't fold them into the actual plan). This buys back most of the
potential loss of plan quality that ensues from using out-of-line
parameters instead of putting literal values right into the query text.
This patch creates a notion of constant-folding expressions 'for
estimation purposes only', in which case we can be more aggressive than
the normal eval_const_expressions() logic can be. Right now the only
difference in behavior is inserting bound values for Params, but it will
be interesting to look at other possibilities. One that we've seen
come up repeatedly is reducing now() and related functions to current
values, so that queries like ... WHERE timestampcol > now() - '1 day'
have some chance of being planned effectively.
Oliver Jowett, with some kibitzing from Tom Lane.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
> >>with allowed values of "all, mod, ddl, none" with default "none".
OK, here is a patch that implements #1. Here is sample output:
test=> set client_min_messages = 'log';
SET
test=> set log_statement = 'mod';
SET
test=> select 1;
?column?
----------
1
(1 row)
test=> update test set x=1;
LOG: statement: update test set x=1;
ERROR: relation "test" does not exist
test=> update test set x=1;
LOG: statement: update test set x=1;
ERROR: relation "test" does not exist
test=> copy test from '/tmp/x';
LOG: statement: copy test from '/tmp/x';
ERROR: relation "test" does not exist
test=> copy test to '/tmp/x';
ERROR: relation "test" does not exist
test=> prepare xx as select 1;
PREPARE
test=> prepare xx as update x set y=1;
LOG: statement: prepare xx as update x set y=1;
ERROR: relation "x" does not exist
test=> explain analyze select 1;;
QUERY PLAN
------------------------------------------------------------------------------------
Result (cost=0.00..0.01 rows=1 width=0) (actual time=0.006..0.007 rows=1 loops=1)
Total runtime: 0.046 ms
(2 rows)
test=> explain analyze update test set x=1;
LOG: statement: explain analyze update test set x=1;
ERROR: relation "test" does not exist
test=> explain update test set x=1;
ERROR: relation "test" does not exist
It checks PREPARE and EXECUTE ANALYZE too. The log_statement values are
'none', 'mod', 'ddl', and 'all'. For 'all', it prints before the query
is parsed, and for ddl/mod, it does it right after parsing using the
node tag (or command tag for CREATE/ALTER/DROP), so any non-parse errors
will print after the log line.
is measured in kilobytes and checked against actual physical execution
stack depth, as per my proposal of 30-Dec. This gives us a fairly
bulletproof defense against crashing due to runaway recursive functions.
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
that the types of untyped string-literal constants are deduced (ie,
when coerce_type is applied to 'em, that's what the type must be).
Remove the ancient hack of storing the input Param-types array as a
global variable, and put the info into ParseState instead. This touches
a lot of files because of adjustment of routine parameter lists, but
it's really not a large patch. Note: PREPARE statement still insists on
exact specification of parameter types, but that could easily be relaxed
now, if we wanted to do so.
I had inadvertently omitted it while rearranging things to support
length-counted incoming messages. Also, change the parser's API back
to accepting a 'char *' query string instead of 'StringInfo', as the
latter wasn't buying us anything except overhead. (I think when I put
it in I had some notion of making the parser API 8-bit-clean, but
seeing that flex depends on null-terminated input, that's not really
ever gonna happen.)
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
command status at the interactive level. SPI_processed, etc are set
in the same way as the returned command status would have been set if
the same querystring were issued interactively. Per gripe from
Michael Paesold 25-Sep-02.
Use flex flags -CF. Pass the to-be-scanned string around as StringInfo
type, to avoid querying the length repeatedly. Clean up some code and
remove lex-compatibility cruft. Escape backslash sequences inline. Use
flex-provided yy_scan_buffer() function to set up input, rather than using
myinput().
are now both invoked once per received SQL command (raw parsetree) from
pg_exec_query_string. BeginCommand is actually just an empty routine
at the moment --- all its former operations have been pushed into tuple
receiver setup routines in printtup.c. This makes for a clean distinction
between BeginCommand/EndCommand (once per command) and the tuple receiver
setup/teardown routines (once per ExecutorRun call), whereas the old code
was quite ad hoc. Along the way, clean up the calling conventions for
ExecutorRun a little bit.
report for each received SQL command, regardless of rewriting activity.
Also ensure that this report comes from the 'original' command, not the
last command generated by rewrite; this fixes 7.2 breakage for INSERT
commands that have actions added by rules. Fernando Nasser and Tom Lane.
per suggestion from Peter. Simplify several APIs by transmitting the
original argv location directly from main.c to ps_status.c, instead of
passing it down through several levels of subroutines.
calls. This has never actually cached anything, because postgres.c does
each fastpath call as a separate transaction command, and so fastpath.c
would always decide that its cache was outdated. If it had worked, it
would now be failing for calls of oldstyle functions due to dangling
pointers in the FmgrInfo struct. Rip it out for simplicity and bug-
proofing.
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
are treated more like 'cancel' interrupts: the signal handler sets a
flag that is examined at well-defined spots, rather than trying to cope
with an interrupt that might happen anywhere. See pghackers discussion
of 1/12/01.
took some rejiggering of typename and ACL parsing, as well as moving
parse_analyze call out of parser(). Restructure postgres.c processing
so that parse analysis and rewrite are skipped when in abort-transaction
state. Only COMMIT and ABORT statements will be processed beyond the raw
parser() phase. This addresses problem of parser failing with database access
errors while in aborted state (see pghackers discussions around 7/28/00).
Also fix some bugs with COMMIT/ABORT statements appearing in the middle of
a single query input string.
Function, operator, and aggregate arguments/results can now use full
TypeName production, in particular foo[] for array types.
DROP OPERATOR and COMMENT ON OPERATOR were broken for unary operators.
Allow CREATE AGGREGATE to accept unquoted numeric constants for initcond.
user is now defined in terms of the user id, the user name is only computed
upon request (for display purposes). This is kind of the opposite of the
previous state, which would maintain the user name and compute the user id
for permission checks.
Besides perhaps saving a few cycles (integer vs string), this now creates a
single point of attack for changing the user id during a connection, for
purposes of "setuid" functions, etc.
backend functions via backend PQexec(). The SPI interface has long
been our only documented way to do this, and the backend pqexec/portal
code is unused and suffering bit-rot. I'm putting it out of its misery.
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
would crash, due to premature invocation of SetQuerySnapshot(). Clean
up problems with handling of multiple queries by splitting
pg_parse_and_plan into two routines. The old code would not, for
example, do the right thing with END; SELECT... submitted in one query
string when it had been in transaction abort state, because it'd decide
to skip planning the SELECT before it had executed the END. New
arrangement is simpler and doesn't force caller to plan if only
parse+rewrite is needed.
Warn_restart has been set by the backend main loop. This means that
elog(ERROR) or elog(FATAL) in the postmaster or during backend startup
now have well-defined behavior: proc_exit() rather than coredump.
In the case of elog() inside the postmaster, I think that proc_exit()
is probably not enough --- don't we want our child backends to be
forced to quit too? But I don't understand Vadim's recent changes in
this area, so I'll leave it to him to look over and tweak if needed.
lists are now plain old garden-variety Lists, allocated with palloc,
rather than specialized expansible-array data allocated with malloc.
This substantially simplifies their handling and eliminates several
sources of memory leakage.
Several basic types of erroneous queries (syntax error, attempt to
insert a duplicate key into a unique index) now demonstrably leak
zero bytes per query.
instead of doing a kill(self, SIGQUIT) and expecting the signal handler
to do it. Also, clean up inconsistent definitions of the sigjmp buffer
in the several files that already referenced it.
patch is applied:
Rewrite rules on relation level work fine now.
Event qualifications on insert/update/delete rules work
fine now.
I added the new keyword OLD to reference the CURRENT
tuple. CURRENT will be removed in 6.5.
Update rules can reference NEW and OLD in the rule
qualification and the actions.
Insert/update/delete rules on views can be established to
let them behave like real tables.
For insert/update/delete rules multiple actions are
supported now. The actions can also be surrounded by
parantheses to make psql happy. Multiple actions are
required if update to a view requires updates to multiple
tables.
Regular users are permitted to create/drop rules on
tables they have RULE permissions for
(DefineQueryRewrite() is now able to get around the
access restrictions on pg_rewrite). This enables view
creation for regular users too. This required an extra
boolean parameter to pg_parse_and_plan() that tells to
set skipAcl on all rangetable entries of the resulting
queries. There is a new function
pg_exec_query_acl_override() that could be used by
backend utilities to use this facility.
All rule actions (not only views) inherit the permissions
of the event relations owner. Sample: User A creates
tables T1 and T2, creates rules that log
INSERT/UPDATE/DELETE on T1 in T2 (like in the regression
tests for rules I created) and grants ALL but RULE on T1
to user B. User B can now fully access T1 and the
logging happens in T2. But user B cannot access T2 at
all, only the rule actions can. And due to missing RULE
permissions on T1, user B cannot disable logging.
Rules on the attribute level are disabled (they don't
work properly and since regular users are now permitted
to create rules I decided to disable them).
Rules on select must have exactly one action that is a
select (so select rules must be a view definition).
UPDATE NEW/OLD rules are disabled (still broken, but
triggers can do it).
There are two new system views (pg_rule and pg_view) that
show the definition of the rules or views so the db admin
can see what the users do. They use two new functions
pg_get_ruledef() and pg_get_viewdef() that are builtins.
The functions pg_get_ruledef() and pg_get_viewdef() could
be used to implement rule and view support in pg_dump.
PostgreSQL is now the only database system I know, that
has rewrite rules on the query level. All others (where I
found a rule statement at all) use stored database
procedures or the like (triggers as we call them) for
active rules (as some call them).
Future of the rule system:
The now disabled parts of the rule system (attribute
level, multiple actions on select and update new stuff)
require a complete new rewrite handler from scratch. The
old one is too badly wired up.
After 6.4 I'll start to work on a new rewrite handler,
that fully supports the attribute level rules, multiple
actions on select and update new. This will be available
for 6.5 so we get full rewrite rule capabilities.
Jan
1. Rewritten libpq to allow asynchronous clients.
2. Implemented client side of cancel protocol in library,
and patched psql.c to send a cancel request upon SIGINT. The
backend doesn't notice it yet :-(
3. Implemented 'Z' protocol message addition and renaming of
copy in/out start messages. These are implemented conditionally,
ie, the client protocol version is checked; so the code should
still work with 1.0 clients.
4. Revised protocol and libpq sgml documents (don't have an SGML
compiler, though, so there may be some markup glitches here).
What remains to be done:
1. Implement addition of atttypmod field to RowDescriptor messages.
The client-side code is there but ifdef'd out. I have no idea
what to change on the backend side. The field should be sent
only if protocol >= 2.0, of course.
2. Implement backend response to cancel requests received as OOB
messages. (This prolly need not be conditional on protocol
version; just do it if you get SIGURG.)
3. Update libpq.3. (I'm hoping this can be generated mechanically
from libpq.sgml... if not, will do it by hand.) Is there any
other doco to fix?
4. Update non-libpq interfaces as necessary. I patched libpgtcl
so that it would compile, but haven't tested it. Dunno what
needs to be done with the other interfaces.
Have at it!
Tom Lane
Subject: Re: [PATCHES] SET DateStyle patches
On Tue, 22 Apr 1997, Thomas Lockhart wrote:
> Some more patches! These (try to) finish implementing SET variable TO value
> for "DateStyle" (changed the name from simply "date" to be more descriptive).
> This is based on code from Martin and Bruce (?), which was easy to modify.
> The syntax is
>
> SET DateStyle TO 'iso'
> SET DateStyle TO 'postgres'
> SET DateStyle TO 'sql'
> SET DateStyle TO 'european'
> SET DateStyle TO 'noneuropean'
> SET DateStyle TO 'us' (same as "noneuropean")
> SET DateStyle TO 'default' (current same as "postgres,us")
>
> ("european" is just compared for the first 4 characters, and "noneuropean"
> is compared for the first 7 to allow less typing).
>
> Multiple arguments are allowed, so SET datestyle TO 'sql,euro' is valid.
>
> My mods also try to implement "SHOW variable" and "RESET variable", but
> that part just core dumps at the moment. I would guess that my errors
> are obvious to someone who knows what they are doing with the parser stuff,
> so if someone (Bruce and/or Martin??) could have it do the right thing
> we will have a more complete set of what we need.
>
> Also, I would like to have a floating point precision global variable to
> implement "SET precision TO 10" and perhaps "SET precision TO 10,2" for
> float8 and float4, but I don't know how to do that for integer types rather
> than strings. If someone is fixing the SHOW and RESET code, perhaps they can
> add some hooks for me to do the floats while they are at it.
>
> I've left some remnants of variable structures in the source code which
> I did not use in the interests of getting something working for v6.1.
> We'll have time to clean things up for the next release...
Subject: [HACKERS] Patch: set date to euro/us postgres/iso/sql
Here a patch that implements a SET date for use by the datetime
stuff. The syntax is
SET date TO 'val[,val,...]'
where val is us (us dates), euro (european dates), postgres,
iso or sql.
Thomas is working on the integration in his datetime module.
I just needed to get the patch out before it went stale :)
Tom Lane
PostgreSQL Daemon
Bruce Momjian
Peter Eisentraut
Jan Wieck
Vadim B. Mikheev
Thomas G. Lockhart
Marc G. Fournier
Bryan Henderson