The intention in commit 491c029db was to require superuserness to
change the BYPASSRLS property, but the actual effect of the coding
in AlterRole() was to require superuserness to change anything at all
about a BYPASSRLS role. Other properties of a BYPASSRLS role should
be changeable under the same rules as for a normal role, though.
Fix that, and also take care of some documentation omissions related
to BYPASSRLS and REPLICATION role properties.
Tom Lane and Stephen Frost, per bug report from Wolfgang Walther.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/a5548a9f-89ee-3167-129d-162b5985fcf8@technowledgy.de
The restriction that only tables and views can be locked by LOCK TABLE
is quite arbitrary, since the underlying mechanism can lock any relation
type. Drop the restriction so that programs such as pg_dump can lock
all relations they're interested in, preventing schema changes that
could cause a dump to fail after expending much effort.
Backpatch to 9.5.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Wells Oliver <wells.oliver@gmail.com>
Discussion: https://postgr.es/m/20201021200659.GA32358@alvherre.pgsql
psql's \connect claims to be able to re-use previous connection
parameters, but in fact it only re-uses the database name, user name,
host name (and possibly hostaddr, depending on version), and port.
This is problematic for assorted use cases. Notably, pg_dump[all]
emits "\connect databasename" commands which we would like to have
re-use all other parameters. If such a script is loaded in a psql run
that initially had "-d connstring" with some non-default parameters,
those other parameters would be lost, potentially causing connection
failure. (Thus, this is the same kind of bug addressed in commits
a45bc8a4f and 8e5793ab6, although the details are much different.)
To fix, redesign do_connect() so that it pulls out all properties
of the old PGconn using PQconninfo(), and then replaces individual
properties in that array. In the case where we don't wish to re-use
anything, get libpq's default settings using PQconndefaults() and
replace entries in that, so that we don't need different code paths
for the two cases.
This does result in an additional behavioral change for cases where
the original connection parameters allowed multiple hosts, say
"psql -h host1,host2", and the \connect request allows re-use of the
host setting. Because the previous coding relied on PQhost(), it
would only permit reconnection to the same host originally selected.
Although one can think of scenarios where that's a good thing, there
are others where it is not. Moreover, that behavior doesn't seem to
meet the principle of least surprise, nor was it documented; nor is
it even clear it was intended, since that coding long pre-dates the
addition of multi-host support to libpq. Hence, this patch is content
to drop it and re-use the host list as given.
Per Peter Eisentraut's comments on bug #16604. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
When told to process all databases, clusterdb, reindexdb, and vacuumdb
would reconnect by replacing their --maintenance-db parameter with the
name of the target database. If that parameter is a connstring (which
has been allowed for a long time, though we failed to document that
before this patch), we'd lose any other options it might specify, for
example SSL or GSS parameters, possibly resulting in failure to connect.
Thus, this is the same bug as commit a45bc8a4f fixed in pg_dump and
pg_restore. We can fix it in the same way, by using libpq's rules for
handling multiple "dbname" parameters to add the target database name
separately. I chose to apply the same refactoring approach as in that
patch, with a struct to handle the command line parameters that need to
be passed through to connectDatabase. (Maybe someday we can unify the
very similar functions here and in pg_dump/pg_restore.)
Per Peter Eisentraut's comments on bug #16604. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
- Misc grammar and punctuation fixes.
- Stylistic cleanup: use spaces between function arguments and JSON fields
in examples. For example "foo(a,b)" -> "foo(a, b)". Add semicolon after
last END in a few PL/pgSQL examples that were missing them.
- Make sentence that talked about "..." and ".." operators more clear,
by avoiding to end the sentence with "..". That makes it look the same
as "..."
- Fix syntax description for HAVING: HAVING conditions cannot be repeated
Patch by Justin Pryzby, per Yaroslav Schekin's report. Backpatch to all
supported versions, to the extent that the patch applies easily.
Discussion: https://www.postgresql.org/message-id/20201005191922.GE17626%40telsasoft.com
The Windows documentation insists that every WSAStartup call should
have a matching WSACleanup call. However, if that ever had actual
relevance, it wasn't in this century. Every remotely-modern Windows
kernel is capable of cleaning up when a process exits without doing
that, and must be so to avoid resource leaks in case of a process
crash. Moreover, Postgres backends have done WSAStartup without
WSACleanup since commit 4cdf51e64 in 2004, and we've never seen any
indication of a problem with that.
libpq's habit of doing WSAStartup during connection start and
WSACleanup during shutdown is also rather inefficient, since a
series of non-overlapping connection requests leads to repeated,
quite expensive DLL unload/reload cycles. We document a workaround
for that (having the application call WSAStartup for itself), but
that's just a kluge. It's also worth noting that it's far from
uncommon for applications to exit without doing PQfinish, and
we've not heard reports of trouble from that either.
However, the real reason for acting on this is that recent
experiments by Alexander Lakhin show that calling WSACleanup
during PQfinish is triggering the symptom we occasionally see
that a process using libpq fails to emit expected stdio output.
Therefore, let's change libpq so that it calls WSAStartup only
once per process, during the first connection attempt, and never
calls WSACleanup at all.
While at it, get rid of the only other WSACleanup call in our code
tree, in pg_dump/parallel.c; that presumably is equally useless.
Back-patch of HEAD commit 7d00a6b2d.
Discussion: https://postgr.es/m/ac976d8c-03df-d6b8-025c-15a2de8d9af1@postgrespro.ru
Section 8.5.1.4, which defines these literals, made only a vague
reference to the fact that they might be evaluated too soon to be
safe in non-interactive contexts. Provide a more explicit caution
against misuse. Also, generalize the wording in the related tip in
section 9.9.4: while it clearly described this problem, it implied
(or really, stated outright) that the problem only applies to table
DEFAULT clauses.
Per gripe from Tijs van Dam. Back-patch to all supported branches.
Discussion: https://postgr.es/m/c2LuRv9BiRT3bqIo5mMQiVraEXey_25B4vUn0kDqVqilwOEu_iVF1tbtvLnyQK7yDG3PFaz_GxLLPil2SDkj1MCObNRVaac-7j1dVdFERk8=@thalex.com
Commit a97e85f2b caused "exceed the available area" warnings in PDF
builds. Fine-tune colwidth values to avoid that.
Back-patch to 9.6, like the prior patch. (This is of dubious value
before v13, since we were far from free of such warnings in older
branches. But we might as well keep the SGML looking the same in all
branches.)
Per buildfarm.
Previously it was documented that toast_tuple_target affected column
marked as only External or Extended. But this description is not correct
and toast_tuple_target affects also column marked as Main.
Back-patch to v11 where toast_tuple_target reloption was introduced.
Author: Shinya Okano
Reviewed-by: Tatsuhito Kasahara, Fujii Masao
Discussion: https://postgr.es/m/93f46e311a67422e89e770d236059817@oss.nttdata.com
Previously, a conversion such as
to_date('-44-02-01','YYYY-MM-DD')
would result in '0045-02-01 BC', as the code attempted to interpret
the negative year as BC, but failed to apply the correction needed
for our internal handling of BC years. Fix the off-by-one problem.
Also, arrange for the combination of a negative year and an
explicit "BC" marker to cancel out and produce AD. This is how
the negative-century case works, so it seems sane to do likewise.
Continue to read "year 0000" as 1 BC. Oracle would throw an error,
but we've accepted that case for a long time so I'm hesitant to
change it in a back-patch.
Per bug #16419 from Saeed Hubaishan. Back-patch to all supported
branches.
Dar Alathar-Yemen and Tom Lane
Discussion: https://postgr.es/m/16419-d8d9db0a7553f01b@postgresql.org
Explicitly mention that primary key constraints are also included in the
limitation that the constraint columns must be a superset of the partition key
columns.
Wording suggestion from Tom Lane.
Discussion: https://postgr.es/m/64062533.78364.1601415362244@mail.yahoo.com
Backpatch-through: 11, where unique constraints on partitioned tables were added
Previously the standby server didn't archive timeline history files
streamed from the primary even when archive_mode is set to "always",
while it archives the streamed WAL files. This could cause the PITR to
fail because there was no required timeline history file in the archive.
The cause of this issue was that walreceiver didn't mark those files as
ready for archiving.
This commit makes walreceiver mark those streamed timeline history
files as ready for archiving if archive_mode=always. Then the archiver
process archives the marked timeline history files.
Back-patch to all supported versions.
Reported-by: Grigory Smolkin
Author: Grigory Smolkin, Fujii Masao
Reviewed-by: David Zhang, Anastasia Lubennikova
Discussion: https://postgr.es/m/54b059d4-2b48-13a4-6f43-95a087c92367@postgrespro.ru
We have had multiple reports that point to the
'@colReorder=latn-digit' collation customization being buggy. We have
reported this to ICU and are waiting for a fix. In the meantime,
remove references to this from the documentation and replace it by
another reordering example. Apparently, many users have been picking
up this example specifically from the documentation.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://www.postgresql.org/message-id/flat/153201618542.1404.3611626898935613264%40wrigleys.postgresql.org
The previous version of the docs mentioned that files are rewritten,
implying that a second copy of each file gets created, but each file is
updated in-place.
Author: Michael Banck
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/858086b6a42fb7d17995b6175856f7e7ec44d0a2.camel@credativ.de
Backpatch-through: 12
We were already raising an error for DROP INDEX CONCURRENTLY on a
partitioned table, albeit a different and confusing one:
ERROR: DROP INDEX CONCURRENTLY must be first action in transaction
Change that to throw a more comprehensible error:
ERROR: cannot drop partitioned index \"%s\" concurrently
Michael Paquier authored the test case for indexes on temporary
partitioned tables.
Backpatch to 11, where indexes on partitioned tables were added.
Reported-by: Jan Mussler <jan.mussler@zalando.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16594-d2956ca909585067@postgresql.org
Back-patch key parts of 4c5cf5431 and 6ca547cf7 into stable branches.
I didn't touch pg_description entries here, so it's purely a docs
change; and I didn't fool with any examples either. The main point
is so that anyone who's wondering if factorial() exists in the stable
branches will be reassured.
Mark Dilger and John Naylor, with some adjustments by me
Discussion: https://postgr.es/m/BE2DF53D-251A-4E26-972F-930E523580E9@enterprisedb.com
When the leftover invalid index is "ccold", there's no need to re-run
the command. Reword the instructions to make that explicit.
Backpatch to 12, where REINDEX CONCURRENTLY appeared.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/20200819211312.GA15497@alvherre.pgsql
Tom Lane
Magnus Hagander
Michael Paquier
Alvaro Herrera
Bruce Momjian
Heikki Linnakangas
Fujii Masao
David Rowley
Peter Eisentraut