This provides infrastructure for looking up arbitrary, user-supplied
XIDs without a risk of scary-looking failures from within the clog
module. Normally, the oldest XID that can be safely looked up in CLOG
is the same as the oldest XID that can reused without causing
wraparound, and the latter is already tracked. However, while
truncation is in progress, the values are different, so we must
keep track of them separately.
Craig Ringer, reviewed by Simon Riggs and by me.
Discussion: http://postgr.es/m/CAMsr+YHQiWNEi0daCTboS40T+V5s_+dst3PYv_8v2wNVH+Xx4g@mail.gmail.com
Clear LH_PAGE_HAS_DEAD_TUPLES during replay, similar to what gets done
for btree. Update hashdesc.c for xl_hash_vacuum_one_page.
Oversights in commit 6977b8b7f4 spotted
by Amit Kapila. Patch by Ashutosh Sharma.
Bump WAL version. The original patch to make hash indexes write-ahead
logged probably should have done this, and the single page vacuuming
patch probably should have done it again, but better late than never.
Discussion: http://postgr.es/m/CAA4eK1Kd=mJ9xreovcsh0qMiAj-QqCphHVQ_Lfau1DR9oVjASQ@mail.gmail.com
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
If a user requests the commit timestamp for a transaction old enough
that its data is concurrently being truncated away by vacuum at just the
right time, they would receive an ugly internal file-not-found error
message from slru.c rather than the expected NULL return value.
In a primary server, the window for the race is very small: the lookup
has to occur exactly between the two calls by vacuum, and there's not a
lot that happens between them (mostly just a multixact truncate). In a
standby server, however, the window is larger because the truncation is
executed as soon as the WAL record for it is replayed, but the advance
of the oldest-Xid is not executed until the next checkpoint record.
To fix in the primary, simply reverse the order of operations in
vac_truncate_clog. To fix in the standby, augment the WAL truncation
record so that the standby is aware of the new oldest-XID value and can
apply the update immediately. WAL version bumped because of this.
No backpatch, because of the low importance of the bug and its rarity.
Author: Craig Ringer
Reviewed-By: Petr Jelínek, Peter Eisentraut
Discussion: https://postgr.es/m/CAMsr+YFhVtRQT1VAwC+WGbbxZZRzNou=N9Ed-FrCqkwQ8H8oJQ@mail.gmail.com
Some background activity (like checkpoints, archive timeout, standby
snapshots) is not supposed to happen on an idle system. Unfortunately
so far it was not easy to determine when a system is idle, which
defeated some of the attempts to avoid redundant activity on an idle
system.
To make that easier, allow to make individual WAL insertions as not
being "important". By checking whether any important activity happened
since the last time an activity was performed, it now is easy to check
whether some action needs to be repeated.
Use the new facility for checkpoints, archive timeout and standby
snapshots.
The lack of a facility causes some issues in older releases, but in my
opinion the consequences (superflous checkpoints / archived segments)
aren't grave enough to warrant backpatching.
Author: Michael Paquier, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Amit Kapila, Kyotaro HORIGUCHI
Bug: #13685
Discussion:
https://www.postgresql.org/message-id/20151016203031.3019.72930@wrigleys.postgresql.orghttps://www.postgresql.org/message-id/CAB7nPqQcPqxEM3S735Bd2RzApNqSNJVietAC=6kfkYv_45dKwA@mail.gmail.com
Backpatch: -
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
Since a892234 & fd31cd265 the visibilitymap's freeze bit is used to
avoid vacuuming the whole relation in anti-wraparound vacuums. Doing so
correctly relies on not adding xids to the heap without also unsetting
the visibilitymap flag. Tuple locking related code has not done so.
To allow selectively resetting all-frozen - to avoid pessimizing
heap_lock_tuple - allow to selectively reset the all-frozen with
visibilitymap_clear(). To avoid having to use
visibilitymap_get_status (e.g. via VM_ALL_FROZEN) inside a critical
section, have visibilitymap_clear() return whether any bits have been
reset.
There's a remaining issue (denoted by XXX): After the PageIsAllVisible()
check in heap_lock_tuple() and heap_lock_updated_tuple_rec() the page
status could theoretically change. Practically that currently seems
impossible, because updaters will hold a page level pin already. Due to
the next beta coming up, it seems better to get the required WAL magic
bump done before resolving this issue.
The added flags field fields to xl_heap_lock and xl_heap_lock_updated
require bumping the WAL magic. Since there's already been a catversion
bump since the last beta, that's not an issue.
Reviewed-By: Robert Haas, Amit Kapila and Andres Freund
Author: Masahiko Sawada, heavily revised by Andres Freund
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: -
This requires some core changes as well so that we can properly
WAL-log the truncation. Specifically, it changes the format of the
XLOG_SMGR_TRUNCATE WAL record, so bump XLOG_PAGE_MAGIC.
Patch by me, reviewed but not fully endorsed by Andres Freund.
Logical messages, added in 3fe3511d05, during decoding failed to filter
messages emitted in other databases and messages emitted "under" a
replication origin the output plugin isn't interested in.
Add tests to verify that both types of filtering actually work. While
touching message.sql remove hunk obsoleted by d25379e.
Bump XLOG_PAGE_MAGIC because xl_logical_message changed and because
3fe3511d05 had omitted doing so. 3fe3511d05 additionally didn't bump
catversion, but 7a542700d has done so since.
Author: Petr Jelinek
Reported-By: Andres Freund
Discussion: 20160406142513.wotqy3ba3kanr423@alap3.anarazel.de
This interface is designed to give an access to WAL for extensions which
could implement new access method, for example. Previously it was
impossible because restoring from custom WAL would need to access system
catalog to find a redo custom function. This patch suggests generic way
to describe changes on page with standart layout.
Bump XLOG_PAGE_MAGIC because of new record type.
Author: Alexander Korotkov with a help of Petr Jelinek, Markus Nullmeier and
minor editorization by my
Reviewers: Petr Jelinek, Alvaro Herrera, Teodor Sigaev, Jim Nasby,
Michael Paquier
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
In 9.5 and master there is no need to support legacy truncation. This is
just committed separately to make it easier to backpatch the WAL logged
multixact truncation to 9.3 and 9.4 if we later decide to do so.
I bumped master's magic from 0xD086 to 0xD088 and 9.5's from 0xD085 to
0xD087 to avoid 9.5 reusing a value that has been in use on master while
keeping the numbers increasing between major versions.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Backpatch: 9.5
Commit 013ebc0a7b introduces microvacuum for
GiST, deletetion of tuple marked LP_DEAD uses IndexPageMultiDelete while
recovery code uses IndexPageTupleDelete in loop. This causes a difference
in offset numbers of tuples to delete. Patch introduces usage of
IndexPageMultiDelete in GiST except gistplacetopage() where only one tuple is
deleted at once. That also slightly improve performance, because
IndexPageMultiDelete is more effective.
Patch changes WAL format, so bump wal page magic.
Bug report from Jeff Janes
Diagnostic and patch by Anastasia Lubennikova and me
Commit 179cdd09 added macros to check if a filename is a WAL segment
or other such file. However there were still some instances of the
strlen + strspn combination to check for that in WAL-related utilities
like pg_archivecleanup. Those checks can be replaced with the macros.
This patch makes use of the macros in those utilities and
which would make the code a bit easier to read.
Back-patch to 9.5.
Michael Paquier
With commit de768844, a copy of the partial segment was archived with the
.partial suffix, but the original file was still left in pg_xlog, so it
didn't actually solve the problems with archiving the partial segment that
it was supposed to solve. With this patch, the partial segment is renamed
rather than copied, so we only archive it with the .partial suffix.
Also be more robust in detecting if the last segment is already being
archived. Previously I used XLogArchiveIsBusy() for that, but that's not
quite right. With archive_mode='always', there might be a .ready file for
it, and we don't want to rename it to .partial in that case.
The old segment is needed until we're fully committed to the new timeline,
i.e. until we've written the end-of-recovery WAL record and updated the
min recovery point and timeline in the control file. So move the renaming
later in the startup sequence, after all that's been done.
Previously, we would archive the possible-incomplete WAL segment with its
normal filename, but that causes trouble if the server owning that timeline
is still running, and tries to archive the same segment later. It's not nice
for the standby to trip up the master's archival like that. And it's pretty
confusing, anyway, to have an incomplete segment in the archive that's
indistinguishable from a normal, complete segment.
To avoid such confusion, add a .partial suffix to the file. Or to be more
precise, make a copy of the old segment under the .partial suffix, and
archive that instead of the original file. pg_receivexlog also uses the
.partial suffix for the same purpose, to tell apart incompletely streamed
files from complete ones.
There is no automatic mechanism to use the .partial files at recovery, so
they will go unused, unless the administrator manually copies to them to
the pg_xlog directory (and removes the .partial suffix). Recovery won't
normally need the WAL - when recovering to the new timeline, it will find
the same WAL on the first segment on the new timeline instead - but it
nevertheless feels better to archive the file with the .partial suffix, for
debugging purposes if nothing else.
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
After a timeline switch, we would leave behind recycled WAL segments that
are in the future, but on the old timeline. After promotion, and after they
become old enough to be recycled again, we would notice that they don't have
a .ready or .done file, create a .ready file for them, and archive them.
That's bogus, because the files contain garbage, recycled from an older
timeline (or prealloced as zeros). We shouldn't archive such files.
This could happen when we're following a timeline switch during replay, or
when we switch to new timeline at end-of-recovery.
To fix, whenever we switch to a new timeline, scan the data directory for
WAL segments on the old timeline, but with a higher segment number, and
remove them. Those don't belong to our timeline history, and are most
likely bogus recycled or preallocated files. They could also be valid files
that we streamed from the primary ahead of time, but in any case, they're
not needed to recover to the new timeline.
Since 465883b0a two versions of commit records have existed. A compact
version that was used when no cache invalidations, smgr unlinks and
similar were needed, and a full version that could deal with all
that. Additionally the full version was embedded into twophase commit
records.
That resulted in a measurable reduction in the size of the logged WAL in
some workloads. But more recently additions like logical decoding, which
e.g. needs information about the database something was executed on,
made it applicable in fewer situations. The static split generally made
it hard to expand the commit record, because concerns over the size made
it hard to add anything to the compact version.
Additionally it's not particularly pretty to have twophase.c insert
RM_XACT records.
Rejigger things so that the commit and abort records only have one form
each, including the twophase equivalents. The presence of the various
optional (in the sense of not being in every record) pieces is indicated
by a bits in the 'xinfo' flag. That flag previously was not included in
compact commit records. To prevent an increase in size due to its
presence, it's only included if necessary; signalled by a bit in the
xl_info bits available for xact.c, similar to heapam.c's
XLOG_HEAP_OPMASK/XLOG_HEAP_INIT_PAGE.
Twophase commit/aborts are now the same as their normal
counterparts. The original transaction's xid is included in an optional
data field.
This means that commit records generally are smaller, except in the case
of a transaction with subtransactions, but no other special cases; the
increase there is four bytes, which seems acceptable given that the more
common case of not having subtransactions shrank. The savings are
especially measurable for twophase commits, which previously always used
the full version; but will in practice only infrequently have required
that.
The motivation for this work are not the space savings and and
deduplication though; it's that it makes it easier to extend commit
records with additional information. That's just a few lines of code
now; without impacting the common case where that information is not
needed.
Discussion: 20150220152150.GD4149@awork2.anarazel.de,
235610.92468.qm%40web29004.mail.ird.yahoo.com
Reviewed-By: Heikki Linnakangas, Simon Riggs
When newly-added GUC parameter, wal_compression, is on, the PostgreSQL server
compresses a full page image written to WAL when full_page_writes is on or
during a base backup. A compressed page image will be decompressed during WAL
replay. Turning this parameter on can reduce the WAL volume without increasing
the risk of unrecoverable data corruption, but at the cost of some extra CPU
spent on the compression during WAL logging and on the decompression during
WAL replay.
This commit changes the WAL format (so bumping WAL version number) so that
the one-byte flag indicating whether a full page image is compressed or not is
included in its header information. This means that the commit increases the
WAL volume one-byte per a full page image even if WAL compression is not used
at all. We can save that one-byte by borrowing one-bit from the existing field
like hole_offset in the header and using it as the flag, for example. But which
would reduce the code readability and the extensibility of the feature.
Per discussion, it's not worth paying those prices to save only one-byte, so we
decided to add the one-byte flag to the header.
This commit doesn't introduce any new compression algorithm like lz4.
Currently a full page image is compressed using the existing PGLZ algorithm.
Per discussion, we decided to use it at least in the first version of the
feature because there were no performance reports showing that its compression
ratio is unacceptably lower than that of other algorithm. Of course,
in the future, it's worth considering the support of other compression
algorithm for the better compression.
Rahila Syed and Michael Paquier, reviewed in various versions by myself,
Andres Freund, Robert Haas, Abhijit Menon-Sen and many others.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
There are four weaknesses in728f152e07f998d2cb4fe5f24ec8da2c3bda98f2:
* append_init() in heapdesc.c was ugly and required that rm_identify
return values are only valid till the next call. Instead just add a
couple more switch() cases for the INIT_PAGE cases. Now the returned
value will always be valid.
* a couple rm_identify() callbacks missed masking xl_info with
~XLR_INFO_MASK.
* pg_xlogdump didn't map a NULL rm_identify to UNKNOWN or a similar
string.
* append_init() was called when id=NULL - which should never actually
happen. But it's better to be careful.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
log_newpage is used by many indexams, in addition to heap, but for
historical reasons it's always been part of the heapam rmgr. Starting with
9.3, we have another WAL record type for logging an image of a page,
XLOG_FPI. Simplify things by moving log_newpage and log_newpage_buffer to
xlog.c, and switch to using the XLOG_FPI record type.
Bump the WAL version number because the code to replay the old HEAP_NEWPAGE
records is removed.
The way the code was written, the padding was copied from uninitialized
memory areas.. Because the structs are local variables in the code where
the WAL records are constructed, making them larger and zeroing the padding
bytes would not make the code very pretty, so rather than fixing this
directly by zeroing out the padding bytes, it seems more clear to not try to
align the tuples in the WAL records. The redo functions are taught to copy
the tuple header to a local variable to avoid unaligned access.
Stable-branches have the same problem, but we can't change the WAL format
there, so fix in master only. Reading a few random extra bytes at the stack
is harmless in practice, so it's not worth crafting a different
back-patchable fix.
Per reports from Kevin Grittner and Andres Freund, using clang static
analyzer and Valgrind, respectively.
It is no longer used, none of the resource managers have multi-record
actions that would make it unsafe to perform a restartpoint.
Also don't allow rm_cleanup to write WAL records, it's also no longer
required. Move the call to rm_cleanup routines to make it more symmetric
with rm_startup.
Splitting a page consists of two separate steps: splitting the child page,
and inserting the downlink for the new right page to the parent. Previously,
we handled the case that you crash in between those steps with a cleanup
routine after the WAL recovery had finished, which finished the incomplete
split. However, that doesn't help if the page split is interrupted but the
database doesn't crash, so that you don't perform WAL recovery. That could
happen for example if you run out of disk space.
Remove the end-of-recovery cleanup step. Instead, when a page is split, the
left page is marked with a new INCOMPLETE_SPLIT flag, and when the downlink
is inserted to the parent, the flag is cleared again. If an insertion sees
a page with the flag set, it knows that the split was interrupted for some
reason, and inserts the missing downlink before proceeding.
I used the same approach to fix GIN and GiST split algorithms earlier. This
was the last WAL cleanup routine, so we could get rid of that whole
machinery now, but I'll leave that for a separate patch.
Reviewed by Peter Geoghegan.
In short, we don't allow a page to be deleted if it's the rightmost child
of its parent, but that situation can change after we check for it.
Problem
-------
We check that the page to be deleted is not the rightmost child of its
parent, and then lock its left sibling, the page itself, its right sibling,
and the parent, in that order. However, if the parent page is split after
the check but before acquiring the locks, the target page might become the
rightmost child, if the split happens at the right place. That leads to an
error in vacuum (I reproduced this by setting a breakpoint in debugger):
ERROR: failed to delete rightmost child 41 of block 3 in index "foo_pkey"
We currently re-check that the page is still the rightmost child, and throw
the above error if it's not. We could easily just give up rather than throw
an error, but that approach doesn't scale to half-dead pages. To recap,
although we don't normally allow deleting the rightmost child, if the page
is the *only* child of its parent, we delete the child page and mark the
parent page as half-dead in one atomic operation. But before we do that, we
check that the parent can later be deleted, by checking that it in turn is
not the rightmost child of the grandparent (potentially recursing all the
way up to the root). But the same situation can arise there - the
grandparent can be split while we're not holding the locks. We end up with
a half-dead page that we cannot delete.
To make things worse, the keyspace of the deleted page has already been
transferred to its right sibling. As the README points out, the keyspace at
the grandparent level is "out-of-whack" until the half-dead page is deleted,
and if enough tuples with keys in the transferred keyspace are inserted, the
page might get split and a downlink might be inserted into the grandparent
that is out-of-order. That might not cause any serious problem if it's
transient (as the README ponders), but is surely bad if it stays that way.
Solution
--------
This patch changes the page deletion algorithm to avoid that problem. After
checking that the topmost page in the chain of to-be-deleted pages is not
the rightmost child of its parent, and then deleting the pages from bottom
up, unlink the pages from top to bottom. This way, the intermediate stages
are similar to the intermediate stages in page splitting, and there is no
transient stage where the keyspace is "out-of-whack". The topmost page in
the to-be-deleted chain doesn't have a downlink pointing to it, like a page
split before the downlink has been inserted.
This also allows us to get rid of the cleanup step after WAL recovery, if we
crash during page deletion. The deletion will be continued at next VACUUM,
but the tree is consistent for searches and insertions at every step.
This bug is old, all supported versions are affected, but this patch is too
big to back-patch (and changes the WAL record formats of related records).
We have not heard any reports of the bug from users, so clearly it's not
easy to bump into. Maybe backpatch later, after this has had some field
testing.
Reviewed by Kevin Grittner and Peter Geoghegan.
Instead of changing the tuple xmin to FrozenTransactionId, the combination
of HEAP_XMIN_COMMITTED and HEAP_XMIN_INVALID, which were previously never
set together, is now defined as HEAP_XMIN_FROZEN. A variety of previous
proposals to freeze tuples opportunistically before vacuum_freeze_min_age
is reached have foundered on the objection that replacing xmin by
FrozenTransactionId might hinder debugging efforts when things in this
area go awry; this patch is intended to solve that problem by keeping
the XID around (but largely ignoring the value to which it is set).
Third-party code that checks for HEAP_XMIN_INVALID on tuples where
HEAP_XMIN_COMMITTED might be set will be broken by this change. To fix,
use the new accessor macros in htup_details.h rather than consulting the
bits directly. HeapTupleHeaderGetXmin has been modified to return
FrozenTransactionId when the infomask bits indicate that the tuple is
frozen; use HeapTupleHeaderGetRawXmin when you already know that the
tuple isn't marked commited or frozen, or want the raw value anyway.
We currently do this in routines that display the xmin for user consumption,
in tqual.c where it's known to be safe and important for the avoidance of
extra cycles, and in the function-caching code for various procedural
languages, which shouldn't invalidate the cache just because the tuple
gets frozen.
Robert Haas and Andres Freund
Tuple freezing was broken in connection to MultiXactIds; commit
8e53ae025d tried to fix it, but didn't go far enough. As noted by
Noah Misch, freezing a tuple whose Xmax is a multi containing an aborted
update might cause locks in the multi to go ignored by later
transactions. This is because the code depended on a multixact above
their cutoff point not having any lock-only member older than the cutoff
point for Xids, which is easily defeated in READ COMMITTED transactions.
The fix for this involves creating a new MultiXactId when necessary.
But this cannot be done during WAL replay, and moreover multixact
examination requires using CLOG access routines which are not supposed
to be used during WAL replay either; so tuple freezing cannot be done
with the old freeze WAL record. Therefore, separate the freezing
computation from its execution, and change the WAL record to carry all
necessary information. At WAL replay time, it's easy to re-execute
freezing because we don't need to re-compute the new infomask/Xmax
values but just take them from the WAL record.
While at it, restructure the coding to ensure all page changes occur in
a single critical section without much room for failures. The previous
coding wasn't using a critical section, without any explanation as to
why this was acceptable.
In replication scenarios using the 9.3 branch, standby servers must be
upgraded before their master, so that they are prepared to deal with the
new WAL record once the master is upgraded; failure to do so will cause
WAL replay to die with a PANIC message. Later upgrade of the standby
will allow the process to continue where it left off, so there's no
disruption of the data in the standby in any case. Standbys know how to
deal with the old WAL record, so it's okay to keep the master running
the old code for a while.
In master, the old freeze WAL record is gone, for cleanliness' sake;
there's no compatibility concern there.
Backpatch to 9.3, where the original bug was introduced and where the
previous fix was backpatched.
Álvaro Herrera and Andres Freund
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
Peter Eisentraut
Robert Haas
Alvaro Herrera
Bruce Momjian
Andres Freund
Teodor Sigaev
Fujii Masao
Heikki Linnakangas
Simon Riggs