should be accounted for in the PROC_SEM_MAP_ENTRIES() macro. Otherwise
the ports that rely on this macro to size data structures are broken.
Mea culpa.
so that only one signal number is used not three. Flags in shared
memory tell the reason(s) for the current signal. This method is
extensible to handle more signal reasons without chewing up even more
signal numbers, but the immediate reason is to keep pg_pwd reloads
separate from SIGHUP processing in the postmaster.
Also clean up some problems in the postmaster with delayed response to
checkpoint status changes --- basically, it wouldn't schedule a checkpoint
if it wasn't getting connection requests on a regular basis.
readability. Bizarre '(long *) TRUE' return convention is gone,
in favor of just raising an error internally in dynahash.c when
we detect hashtable corruption. HashTableWalk is gone, in favor
of using hash_seq_search directly, since it had no hope of working
with non-LONGALIGNable datatypes. Simplify some other code that was
made undesirably grotty by promixity to HashTableWalk.
portability issues). Caller-visible data structures are now allocated
on MAXALIGN boundaries, allowing safe use of datatypes wider than 'long'.
Rejigger hash_create API so that caller specifies size of key and
total size of entry, not size of key and size of rest of entry.
This simplifies life considerably since each number is just a sizeof(),
and padding issues etc. are taken care of automatically.
upper limit on what we will believe from sysconf(_SC_OPEN_MAX). The
default value is 1000, so that under ordinary conditions it won't
affect the behavior. But on platforms where the kernel promises far
more than it can deliver, this can be used to prevent running out of
file descriptors. See numerous past discussions, eg, pgsql-hackers
around 23-Dec-2000.
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
a hung client or lost connection can't indefinitely block a postmaster
child (not to mention the possibility of deliberate DoS attacks).
Timeout is controlled by new authentication_timeout GUC variable,
which I set to 60 seconds by default ... does that seem reasonable?
for them, and making them just wastes time during backend startup/shutdown.
Also, remove compile-time MAXBACKENDS limit per long-ago proposal.
You can now set MaxBackends as high as your kernel can stand without
any reconfiguration/recompilation.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
useful as yet, since its primary source of information is (full) VACUUM,
which makes a concerted effort to get rid of free space before telling
the map about it ... next stop is concurrent VACUUM ...
stub) into the rest of the system. Adopt a cleaner approach to preventing
deadlock in concurrent heap_updates: allow RelationGetBufferForTuple to
select any page of the rel, and put the onus on it to lock both buffers
in a consistent order. Remove no-longer-needed isExtend hack from
API of ReleaseAndReadBuffer.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
SI messages now include the relevant database OID, so that operations
in one database do not cause useless cache flushes in backends attached
to other databases. Declare SI messages properly using a union, to
eliminate the former assumption that Oid is the same size as int or Index.
Rewrite the nearly-unreadable code in inval.c, and document it better.
Arrange for catcache flushes at end of command/transaction to happen before
relcache flushes do --- this avoids loading a new tuple into the catcache
while setting up new relcache entry, only to have it be flushed again
immediately.
Cygwin with the possible exception of mSQL-interface. Since I don't
have mSQL installed, I skipped this tool.
Except for dealing with a missing getopt.h (oid2name) and HUGE (seg),
the bulk of the patch uses the standard PostgreSQL approach to deal with
Windows DLL issues.
I tested the build aspect of this patch under Cygwin and Linux without
any ill affects. Note that I did not actually attempt to test the code
for functionality.
The procedure to apply the patch is as follows:
$ # save the attachment as /tmp/contrib.patch
$ # change directory to the top of the PostgreSQL source tree
$ patch -p0 </tmp/contrib.patch
Jason
detected sooner in backend startup, and is treated as an expected error
(it gives 'Sorry, too many clients already' now). This allows us not
to have to enforce the MaxBackends limit exactly in the postmaster.
Also, remove ProcRemove() and fold its functionality into ProcKill().
There's no good reason for a backend not to be responsible for removing
its PROC entry, and there are lots of good reasons for the postmaster
not to be touching shared-memory data structures.
directory (which can be made a symlink to put temp files on another disk).
Add code to delete leftover temp files during postmaster startup.
Bruce, with some kibitzing from Tom.
appropriate pin-count manipulation, and instead use ReleaseAndReadBuffer.
Make use of the fact that the passed-in buffer (if there is one) must
be pinned to avoid grabbing the bufmgr spinlock when we are able to
return this same buffer. Eliminate unnecessary 'previous tuple' and
'next tuple' fields of HeapScanDesc and IndexScanDesc, thereby removing
a whole lot of bookkeeping from heap_getnext() and related routines.
Python) to support shared extension modules, I have learned that Guido
prefers the style of the attached patch to solve the above problem.
I feel that this solution is particularly appropriate in this case
because the following:
PglargeType
PgType
PgQueryType
are already being handled in the way that I am proposing for PgSourceType.
Jason Tishler
it does not support 64bit integers. AFAIK that's the default data type for
OIDs, so I am not surprised that this does not work. Use gcc instead.
BTW., 7.1 does not compile as is with gcc either, I believed the
required patches made it into the 7.1.1 release but obviously I missed
the deadline.
Since the ports mailing list does not seem to be archived I have attached
a copy of the patch (for 7.1 and 7.1.1).
I've just performed a build of a Watcom compiled version and found a couple
of bugs in the watcom specific part of that patch. Please use the attached
version instead.
Tegge, Bernd
when we need to move to a new page; as long as we can insert the new
tuple on the same page as before, we only need LockBuffer and not the
expensive stuff. Also, twiddle bufmgr interfaces to avoid redundant
lseeks in RelationGetBufferForTuple and BufferAlloc. Successive inserts
now require one lseek per page added, rather than one per tuple with
several additional ones at each page boundary as happened before.
Lock contention when multiple backends are inserting in same table
is also greatly reduced.
not being consulted anywhere, so remove it and remove the _mdnblocks()
calls that were used to set it. Change smgrextend interface to pass in
the target block number (ie, current file length) --- the caller always
knows this already, having already done smgrnblocks(), so it's silly to
do it over again inside mdextend. Net result: extension of a file now
takes one lseek(SEEK_END) and a write(), not three lseeks and a write.
as six bytes not eight. This fixes a regression test failure but more
importantly avoids wasting four bytes of pad space in every tuple header.
Also add some commentary about what's going on.
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
only if at least N other backends currently have open transactions. This
is not a great deal of intelligence about whether a delay might be
profitable ... but it beats no intelligence at all. Note that the default
COMMIT_DELAY is still zero --- this new code does nothing unless that
setting is changed.
Also, mark ENABLEFSYNC as a system-wide setting. It's no longer safe to
allow that to be set per-backend, since we may be relying on some other
backend's fsync to have synced the WAL log.
> Is there one LOCKMETHODCTL for every backend? I thought there was only
> one of them.
>>
>> You're right, that line is erroneous; it should read
>>
>> size += MAX_LOCK_METHODS * MAXALIGN(sizeof(LOCKMETHODCTL));
>>
>> Not a significant error but it should be changed for clarity ...
waste of cycles on single-CPU machines, and of dubious utility on multi-CPU
machines too.
Tweak s_lock_stuck so that caller can specify timeout interval, and
increase interval before declaring stuck spinlock for buffer locks and XLOG
locks.
On systems that have fdatasync(), use that rather than fsync() to sync WAL
log writes. Ensure that WAL file is entirely allocated during XLogFileInit.