Verify that the number of matches is exactly what it should be, not just
that it not be zero. This should help us detect any environment-dependent
issues.
Also, verify that we're getting the expected type of scan plan (either
bitmap or seqscan as appropriate). Right now, this is failing on the
cidrcol test cases, as shown in the output file. I'll look into that
in a bit, but it seems good to commit this as-is temporarily to verify
that it behaves as expected on the buildfarm.
Casting to char, without quotes, does not give the same results as casting
to "char". That meant we were not testing the brin "char" paths at all,
since we ended up with a text operator not a "char" operator.
This test used seqscans on tenk1, with LIMIT, to build test data.
That works most of the time, but if the synchronized-seqscan logic
kicks in, we get varying test data. This seems likely to explain
the erratic test failures on buildfarm member chipmunk, which uses
smaller-than-default shared_buffers. To fix, add ORDER BY clauses to
force the ordering to be what it was implicitly being assumed to be.
Peter Geoghegan had noticed this with respect to one of the trouble
spots, though not the ones actually causing the chipmunk issue.
Some recent buildfarm failures can be explained by supposing that
autovacuum or autoanalyze fired on the tables created by this test,
resulting in plan changes. Do a proactive VACUUM ANALYZE on the
test's principal tables to try to forestall such changes.
The commit c22ed3d523 turned
the -i/--ignore-version options into no-ops and marked as deprecated.
Considering we shipped that in 8.4, it's time to remove all trace of
those switches, per discussion. We'd still have to wait a couple releases
before it'd be safe to use -i for something else, but it'd be a start.
add_path_precheck was doing exact comparisons of path costs, but it really
needs to do them fuzzily to be sure it won't reject paths that could
survive add_path's comparisons. (This can only matter if the initial cost
estimate is very close to the final one, but that turns out to often be
true.)
Also, it should ignore startup cost for this purpose if and only if
compare_path_costs_fuzzily would do so. The previous coding always ignored
startup cost for parameterized paths, which is wrong as of commit
3f59be836c555fa6; it could result in improper early rejection of paths that
we care about for SEMI/ANTI joins. It also always considered startup cost
for unparameterized paths, which is just as wrong though the only effect is
to waste planner cycles on paths that can't survive. Instead, it should
consider startup cost only when directed to by the consider_startup/
consider_param_startup relation flags.
Likewise, compare_path_costs_fuzzily should have symmetrical behavior
for parameterized and unparameterized paths. In this case, the best
answer seems to be that after establishing that total costs are fuzzily
equal, we should compare startup costs whether or not the consider_xxx
flags are on. That is what it's always done for unparameterized paths,
so let's make the behavior for parameterized paths match.
These issues were noted while developing the SEMI/ANTI join costing fix
of commit 3f59be836c, but we chose not to back-patch these fixes,
because they can cause changes in the planner's choices among
nearly-same-cost plans. (There is in fact one minor change in plan choice
within the core regression tests.) Destabilizing plan choices in back
branches without very clear improvements is frowned on, so we'll just fix
this in HEAD.
When the inner side of a nestloop SEMI or ANTI join is an indexscan that
uses all the join clauses as indexquals, it can be presumed that both
matched and unmatched outer rows will be processed very quickly: for
matched rows, we'll stop after fetching one row from the indexscan, while
for unmatched rows we'll have an indexscan that finds no matching index
entries, which should also be quick. The planner already knew about this,
but it was nonetheless charging for at least one full run of the inner
indexscan, as a consequence of concerns about the behavior of materialized
inner scans --- but those concerns don't apply in the fast case. If the
inner side has low cardinality (many matching rows) this could make an
indexscan plan look far more expensive than it actually is. To fix,
rearrange the work in initial_cost_nestloop/final_cost_nestloop so that we
don't add the inner scan cost until we've inspected the indexquals, and
then we can add either the full-run cost or just the first tuple's cost as
appropriate.
Experimentation with this fix uncovered another problem: add_path and
friends were coded to disregard cheap startup cost when considering
parameterized paths. That's usually okay (and desirable, because it thins
the path herd faster); but in this fast case for SEMI/ANTI joins, it could
result in throwing away the desired plain indexscan path in favor of a
bitmap scan path before we ever get to the join costing logic. In the
many-matching-rows cases of interest here, a bitmap scan will do a lot more
work than required, so this is a problem. To fix, add a per-relation flag
consider_param_startup that works like the existing consider_startup flag,
but applies to parameterized paths, and set it for relations that are the
inside of a SEMI or ANTI join.
To make this patch reasonably safe to back-patch, care has been taken to
avoid changing the planner's behavior except in the very narrow case of
SEMI/ANTI joins with inner indexscans. There are places in
compare_path_costs_fuzzily and add_path_precheck that are not terribly
consistent with the new approach, but changing them will affect planner
decisions at the margins in other cases, so we'll leave that for a
HEAD-only fix.
Back-patch to 9.3; before that, the consider_startup flag didn't exist,
meaning that the second aspect of the patch would be too invasive.
Per a complaint from Peter Holzer and analysis by Tomas Vondra.
The function is given a fourth parameter, which defaults to true. When
this parameter is true, if the last element of the path is missing
in the original json, jsonb_set creates it in the result and assigns it
the new value. If it is false then the function does nothing unless all
elements of the path are present, including the last.
Based on some original code from Dmitry Dolgov, heavily modified by me.
Catalog version bumped.
The fsync code from the backend essentially assumes that somebody's already
validated PGDATA, at least to the extent of it being a readable directory.
That's safe enough for initdb's normal code path too, but "initdb -S"
doesn't have any other processing at all that touches the target directory.
To have reasonable error-case behavior, add a pg_check_dir call.
Per gripe from Peter E.
The argument that this is a sufficiently-expected case to be silently
ignored seems pretty thin. Andres had brought it up back when we were
still considering that most fsync failures should be hard errors, and it
probably would be legit not to fail hard for ETXTBSY --- but the same is
true for EROFS and other cases, which is why we gave up on hard failures.
ETXTBSY is surely not a normal case, so logging the failure seems fine
from here.
opr_sanity.sql has a test checking that relevant properties of built-in
functions match when the same C function is referenced by multiple pg_proc
entries. The test neglected to check proleakproof, though, and when
I added that condition it exposed that xideqint4 hadn't been updated to
match xideq. So fix that as well, and in consequence bump catversion.
This isn't very critical, so no need to worry about fixing back branches.
Make initdb's version of this logic look as much like the backend's
as possible. This is much less critical than in the backend since not
so many people use "initdb -S", but we want the same corner-case error
handling in both cases.
Back-patch to 9.3 where initdb -S option was introduced. Before that,
initdb only had to deal with freshly-created data directories, wherein
no failures should be expected.
Abhijit Menon-Sen
This undoes a poorly-thought-out choice in commit 970a18687f, namely
to export guc.c's internal variable data_directory. The authoritative
variable so far as C code is concerned is DataDir; there is no reason for
anything except specific bits of GUC code to look at the GUC variable.
After yesterday's commits fixing the fsync-on-restart patch, the only
remaining misuse of data_directory was in AlterSystemSetConfigFile(),
which would be much better off just using a relative path anyhow: it's
less code and it doesn't break if the DBA moves the data directory of a
running system, which is a case we've taken some pains over in the past.
This is mostly cosmetic, so no need for a back-patch (and I'd be hesitant
to remove a global variable in stable branches anyway).
Commit 2ce439f337 introduced a rather serious
regression, namely that if its scan of the data directory came across any
un-fsync-able files, it would fail and thereby prevent database startup.
Worse yet, symlinks to such files also caused the problem, which meant that
crash restart was guaranteed to fail on certain common installations such
as older Debian.
After discussion, we agreed that (1) failure to start is worse than any
consequence of not fsync'ing is likely to be, therefore treat all errors
in this code as nonfatal; (2) we should not chase symlinks other than
those that are expected to exist, namely pg_xlog/ and tablespace links
under pg_tblspc/. The latter restriction avoids possibly fsync'ing a
much larger part of the filesystem than intended, if the user has left
random symlinks hanging about in the data directory.
This commit takes care of that and also does some code beautification,
mainly moving the relevant code into fd.c, which seems a much better place
for it than xlog.c, and making sure that the conditional compilation for
the pre_sync_fname pass has something to do with whether pg_flush_data
works.
I also relocated the call site in xlog.c down a few lines; it seems a
bit silly to be doing this before ValidateXLOGDirectoryStructure().
The similar logic in initdb.c ought to be made to match this, but that
change is noncritical and will be dealt with separately.
Back-patch to all active branches, like the prior commit.
Abhijit Menon-Sen and Tom Lane
The previous coding suffered a null-pointer dereference if it found any
symlink at the top level of $PGDATA. Fix that, and teach it to recurse
into a symlink for pg_xlog, but not anything else.
Per note from Abhijit Menon-Sen.
Ensure that we null-terminate the result string (one place in pg_rewind).
Be paranoid about out-of-range results from readlink() (should not happen,
but there is no good reason for some call sites to be careful about it and
others not). Consistently use the whole buffer, not sometimes one byte
less. Ensure we emit an appropriate errcode() in all cases. Spell the
error messages the same way.
The only serious bug here is the missing null-termination in pg_rewind,
which is new code, so no need for a back-patch.
Abhijit Menon-Sen and Tom Lane
Seems to have been an oversight in the original leakproofness patch.
Per report and patch from Jeevan Chalke.
In passing, prettify some awkward leakproof-related code in AlterFunction.
specparse.y and specscanner.l used "string" as a token name. Now, bison
likes to define each token name as a macro for the token code it assigns,
which means those names are basically off-limits for any other use within
the grammar file or included headers. So names as generic as "string" are
dangerous. This is what was causing the recent failures on protosciurus:
some versions of Solaris' sys/kstat.h use "string" as a field name.
With late-model bison we don't see this problem because the token macros
aren't defined till later (that is why castoroides didn't show the problem
even though it's on the same machine). But protosciurus uses bison 1.875
which defines the token macros up front.
This land mine has been there from day one; we'd have found it sooner
except that protosciurus wasn't trying to run the isolation tests till
recently.
To fix, rename the token to "string_literal" which is hopefully less
likely to collide with names used by system headers. Back-patch to
all branches containing the isolation tests.
brin.sql included a call of brin_summarize_new_values(), and expected
it to always report exactly 5 summarization events. This failed sometimes
during parallel regression tests, as a consequence of the database-wide
VACUUM in gist.sql getting there first. The most future-proof way
to avoid variation in the test results is to forget about using
brin_summarize_new_values() and just do a plain "VACUUM brintest",
which will exercise the same code anyway.
Having done that, there's no need for preventing autovacuum on brintest;
doing so just reduces the scope of test coverage, so let's not.
Commit 9b74f32cdb did this for objects of
type jbvBinary, but in trying further to simplify some of the new jsonb
code I discovered that objects of type jbvObject or jbvArray passed as
WJB_ELEM or WJB_VALUE also caused problems. These too are now added
component by component.
Backpatch to 9.4.
brin_form_tuple calculated an exact tuple size, then palloc'd and
filled just that much. Later, brin_doinsert or brin_doupdate would
MAXALIGN the tuple size and tell PageAddItem that that was the size
of the tuple to insert. If the original tuple size wasn't a multiple
of MAXALIGN, the net result would be that PageAddItem would memcpy
a few more bytes than the palloc request had been for.
AFAICS, this is totally harmless in the real world: the error is a
read overrun not a write overrun, and palloc would certainly have
rounded the request up to a MAXALIGN multiple internally, so there's
no chance of the memcpy fetching off the end of memory. Valgrind,
however, is picky to the byte level not the MAXALIGN level.
Fix it by pushing the MAXALIGN step back to brin_form_tuple. (The other
possible source of tuples in this code, brin_form_placeholder_tuple,
was already producing a MAXALIGN'd result.)
In passing, be a bit more paranoid about internal allocations in
brin_form_tuple.
Multixact truncation is now handled differently, and this file hadn't
gotten the memo.
Per note from Amit Langote. I didn't use his patch, though.
Also update the description of infomask bits, which weren't completely up
to date either. This commit also propagates b01a4f6838 back to 9.3 and
9.4, which apparently I failed to do back then.
Some of this is made possible by commit
9b74f32cdb which lets pushJsonbValue
handle binary Jsonb values, meaning that clients no longer have to, and
some is just doing things in simpler and more straightforward ways.
Fix some places where pgindent did silly stuff, often because project
style wasn't followed to begin with. (I've not touched the atomics
headers, though.)
The name objectType is widely used as a field name, and it's pure luck that
this conflict has not caused pgindent to go crazy before. It messed up
pg_audit.c pretty good though. Since pg_shdepend.c doesn't export this
typedef and only uses it in three places, changing that seems saner than
changing the field usages.
Back-patch because we're contemplating using the union of all branch
typedefs for future pgindent runs, so this won't fix anything if it
stays the same in back branches.
Remove a bunch of "extern Datum foo(PG_FUNCTION_ARGS);" declarations that
are no longer needed now that PG_FUNCTION_INFO_V1(foo) provides that.
Some of these were evidently missed in commit e7128e8dbb, but others
were cargo-culted in in code added since then. Possibly that can be blamed
in part on the fact that we'd not fixed relevant documentation examples,
which I've now done.
Typo in commit 7cbee7c0a. No practical effect since the buffer should
never actually be overrun, but various compilers and static analyzers will
whine about it.
Petr Jelinek
Fix confusion in documentation, substantial memory leakage if float8 or
float4 are pass-by-reference, and assorted comments that were obsoleted
by commit 98edd617f3.
Previously, INSERT with ON CONFLICT DO UPDATE specified used a new
command tag -- UPSERT. It was introduced out of concern that INSERT as
a command tag would be a misrepresentation for ON CONFLICT DO UPDATE, as
some affected rows may actually have been updated.
Alvaro Herrera noticed that the implementation of that new command tag
was incomplete; in subsequent discussion we concluded that having it
doesn't provide benefits that are in line with the compatibility breaks
it requires.
Catversion bump due to the removal of PlannedStmt->isUpsert.
Author: Peter Geoghegan
Discussion: 20150520215816.GI5885@postgresql.org
Silly oversight in commit 1dc5ebc9077ab742079ce5dac9a6664248d42916:
when array2 is an expanded array, it might have array2->xpn.dnulls equal
to NULL, indicating the array is known null-free. The code wasn't
expecting that, because it formerly always used deconstruct_array() which
always delivers a nulls array.
Per bug #13334 from Regina Obe.
pushJsonbValue was accepting jbvBinary objects passed as WJB_ELEM or
WJB_VALUE data. While this succeeded, when those objects were later
encountered in attempting to convert the result to Jsonb, errors
occurred. With this change we ghuarantee that a JSonbValue constructed
from calls to pushJsonbValue does not contain any jbvBinary objects.
This cures a problem observed with jsonb_delete.
This means callers of pushJsonbValue no longer need to perform this
unpacking themselves. A subsequent patch will perform some cleanup in
that area.
The error was not triggered by any 9.4 code, but this is a publicly
visible routine, and so the error could be exercised by third party
code, therefore backpatch to 9.4.
Bug report from Peter Geoghegan, fix by me.
With commit de768844, a copy of the partial segment was archived with the
.partial suffix, but the original file was still left in pg_xlog, so it
didn't actually solve the problems with archiving the partial segment that
it was supposed to solve. With this patch, the partial segment is renamed
rather than copied, so we only archive it with the .partial suffix.
Also be more robust in detecting if the last segment is already being
archived. Previously I used XLogArchiveIsBusy() for that, but that's not
quite right. With archive_mode='always', there might be a .ready file for
it, and we don't want to rename it to .partial in that case.
The old segment is needed until we're fully committed to the new timeline,
i.e. until we've written the end-of-recovery WAL record and updated the
min recovery point and timeline in the control file. So move the renaming
later in the startup sequence, after all that's been done.
Paul Ramsey reported that commit 35fcb1b3d0
induced a core dump on commuted ORDER BY expressions, because it was
assuming that the indexorderby expression could be found verbatim in the
relevant equivalence class, but it wasn't there. We really don't need
anything that complicated anyway; for the data types likely to be used for
index ORDER BY operators in the foreseeable future, the exprType() of the
ORDER BY expression will serve fine. (The case where we'd have to work
harder is where the ORDER BY expression's result is only binary-compatible
with the declared input type of the ordering operator; long before worrying
about that, one would need to get rid of GiST's hard-wired assumption that
said datatype is float8.)
Aside from fixing that crash and adding a regression test for the case,
I did some desultory code review:
nodeIndexscan.c was likewise overthinking how hard it ought to work to
identify the datatype of the ORDER BY expressions.
Add comments explaining how come nodeIndexscan.c can get away with
simplifying assumptions about NULLS LAST ordering and no backward scan.
Revert no-longer-needed changes of find_ec_member_for_tle(); while the
new definition was no worse than the old, it wasn't better either, and
it might cause back-patching pain.
Revert entirely bogus additions to genam.h.
We want this struct to be exactly a series of 3 int16 words, no more
and no less. Historically, at least, some ARM compilers preferred to
pad it to 8 bytes unless coerced. Our old way of doing that was just
to use __attribute__((packed)), but as pointed out by Piotr Stefaniak,
that does too much: it also licenses the compiler to give the struct
only byte-alignment. We don't want that because it adds access overhead,
possibly quite significant overhead. According to the GCC manual, what
we want requires also specifying __attribute__((align(2))). It's not
entirely clear if all the relevant compilers accept this pragma as well,
but we can hope the buildfarm will tell us if not. We can also add a
static assertion that should fire if the compiler padded the struct.
Since the combination of these pragmas should define exactly what we
want on any compiler that accepts them, let's try using them wherever
we think they exist, not only for __arm__. (This is likely to expose
that the conditional definitions in c.h are inadequate, but finding
that out would be a good thing.)
The immediate motivation for this is that the current definition of
ExecRowMark allows its curCtid field to be misaligned. It is not clear
whether there are any other uses of ItemPointerData with a similar hazard.
We could change the definition of ExecRowMark if this doesn't work, but
it would be far better to have a future-proof fix.
Piotr Stefaniak, some further hacking by me
Previously even if recovery_target_action was set to pause and
the recovery target was reached, the recovery could never be paused.
Because the setting of pause was *always* overridden with that of
shutdown unexpectedly. This override is valid and intentional
if hot_standby is not enabled because there is no way to resume
the paused recovery in this case and the setting of pause is
completely useless. But not if hot_standby is enabled.
This patch changes the code so that the setting of pause is overridden
with that of shutdown only when hot_standby is not enabled.
Bug reported by Andres Freund
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
This reverts commit 16304a0134, except
for its changes in src/port/snprintf.c; as well as commit
cac18a76bb which is no longer needed.
Fujii Masao reported that the previous commit caused failures in psql on
OS X, since if one exits the pager program early while viewing a query
result, psql sees an EPIPE error from fprintf --- and the wrapper function
thought that was reason to panic. (It's a bit surprising that the same
does not happen on Linux.) Further discussion among the security list
concluded that the risk of other such failures was far too great, and
that the one-size-fits-all approach to error handling embodied in the
previous patch is unlikely to be workable.
This leaves us again exposed to the possibility of the type of failure
envisioned in CVE-2015-3166. However, that failure mode is strictly
hypothetical at this point: there is no concrete reason to believe that
an attacker could trigger information disclosure through the supposed
mechanism. In the first place, the attack surface is fairly limited,
since so much of what the backend does with format strings goes through
stringinfo.c or psprintf(), and those already had adequate defenses.
In the second place, even granting that an unprivileged attacker could
control the occurrence of ENOMEM with some precision, it's a stretch to
believe that he could induce it just where the target buffer contains some
valuable information. So we concluded that the risk of non-hypothetical
problems induced by the patch greatly outweighs the security risks.
We will therefore revert, and instead undertake closer analysis to
identify specific calls that may need hardening, rather than attempt a
universal solution.
We have kept the portion of the previous patch that improved snprintf.c's
handling of errors when it calls the platform's sprintf(). That seems to
be an unalloyed improvement.
Security: CVE-2015-3166
Neither the deparsing of the new alias for INSERT's target table, nor of
the inference clause was supported. Also fixup a typo in an error
message.
Add regression tests to test those code paths.
Author: Peter Geoghegan
Defer lookup of opfamily and input type of a of a user specified opclass
until the optimizer selects among available unique indexes; and store
the opclass in the parse analyzed tree instead. The primary reason for
doing this is that for rule deparsing it's easier to use the opclass
than the previous representation.
While at it also rename a variable in the inference code to better fit
it's purpose.
This is separate from the actual fixes for deparsing to make review
easier.
The point of the assertion is to ensure that the arrays allocated in stack
are large enough, but the check was one item short.
This won't matter in practice because MaxIndexTuplesPerPage is an
overestimate, so you can't have that many items on a page in reality.
But let's be tidy.
Spotted by Anastasia Lubennikova. Backpatch to all supported versions, like
the patch that added the assertion.
No index in template0 should have collation-dependent ordering, especially
not indexes on shared catalogs. For most textual columns we avoid this
issue by using type "name" (which sorts per strcmp()). However there are a
few indexed columns that we'd prefer to use "text" for, and for that, the
default opclass text_ops is unsafe. Fortunately, text_pattern_ops is safe
(it sorts per memcmp()), and it has no real functional disadvantage for our
purposes. So change the indexes on pg_seclabel.provider and
pg_shseclabel.provider to use text_pattern_ops.
In passing, also mark pg_replication_origin.roname as using
text_pattern_ops --- for some reason it was labeled varchar_pattern_ops
which is just wrong, even though it accidentally worked.
Add regression test queries to catch future errors of these kinds.
We still can't do anything about the misdeclared pg_seclabel and
pg_shseclabel indexes in back branches :-(
The plain C string language name needs to be wrapped in makeString() so
that the parse tree is copyable. This is detectable by
-DCOPY_PARSE_PLAN_TREES. Add a test case for the COMMENT case.
Also make the quoting in the error messages more consistent.
discovered by Tom Lane
These were "text", but that's a bad idea because it has collation-dependent
ordering. No index in template0 should have collation-dependent ordering,
especially not indexes on shared catalogs. There was general agreement
that provider names don't need to be longer than other identifiers, so we
can fix this at a small waste of table space by changing from text to name.
There's no way to fix the problem in the back branches, but we can hope
that security labels don't yet have widespread-enough usage to make it
urgent to fix.
There needs to be a regression sanity test to prevent us from making this
same mistake again; but before putting that in, we'll need to get rid of
similar brain fade in the recently-added pg_replication_origin catalog.
Note: for lack of a suitable testing environment, I've not really exercised
this change. I trust the buildfarm will show up any mistakes.
The previous coding was a leftover from attempting to hang all the on
conflict logic onto modify table's child nodes. It appears to not have
actually caused problems except for explain.
Add test exercising the broken and some other code paths.
Author: Peter Geoghegan and Andres Freund
Commit 83e176ec18 removed the longstanding
support functions for block sampling without any consideration of the
impact this would have on third-party FDWs. The new API is not notably
more functional for FDWs than the old, so forcing them to change doesn't
seem like a good thing. We can provide the old API as a wrapper (more
or less) around the new one for a minimal amount of extra code.
PostgreSQL already checked the vast majority of these, missing this
handful that nearly cannot fail. If putenv() failed with ENOMEM in
pg_GSS_recvauth(), authentication would proceed with the wrong keytab
file. If strftime() returned zero in cache_locale_time(), using the
unspecified buffer contents could lead to information exposure or a
crash. Back-patch to 9.0 (all supported versions).
Other unchecked calls to these functions, especially those in frontend
code, pose negligible security concern. This patch does not address
them. Nonetheless, it is always better to check return values whose
specification provides for indicating an error.
In passing, fix an off-by-one error in strftime_win32()'s invocation of
WideCharToMultiByte(). Upon retrieving a value of exactly MAX_L10N_DATA
bytes, strftime_win32() would overrun the caller's buffer by one byte.
MAX_L10N_DATA is chosen to exceed the length of every possible value, so
the vulnerable scenario probably does not arise.
Security: CVE-2015-3166
All known standard library implementations of these functions can fail
with ENOMEM. A caller neglecting to check for failure would experience
missing output, information exposure, or a crash. Check return values
within wrappers and code, currently just snprintf.c, that bypasses the
wrappers. The wrappers do not return after an error, so their callers
need not check. Back-patch to 9.0 (all supported versions).
Popular free software standard library implementations do take pains to
bypass malloc() in simple cases, but they risk ENOMEM for floating point
numbers, positional arguments, large field widths, and large precisions.
No specification demands such caution, so this commit regards every call
to a printf family function as a potential threat.
Injecting the wrappers implicitly is a compromise between patch scope
and design goals. I would prefer to edit each call site to name a
wrapper explicitly. libpq and the ECPG libraries would, ideally, convey
errors to the caller rather than abort(). All that would be painfully
invasive for a back-patched security fix, hence this compromise.
Security: CVE-2015-3166
Reentering this function with the right timing caused a double free,
typically crashing the backend. By synchronizing a disconnection with
the authentication timeout, an unauthenticated attacker could achieve
this somewhat consistently. Call be_tls_close() solely from within
proc_exit_prepare(). Back-patch to 9.0 (all supported versions).
Benkocs Norbert Attila
Security: CVE-2015-3165
This oversight results in a crash at executor startup if the plan has
been copied. outfuncs.c was missed as well.
While we could probably have taught both those files to cope with the
originally chosen representation of an Oid array, it would have been
painful, not least because there'd be no easy way to verify the array
length. An Oid List is far easier to work with. And AFAICS, there is
no particular notational benefit to using an array rather than a list
in the existing parts of the patch either. So just change it to a list.
Error in commit 35fcb1b3d0, which is new,
so no need for back-patch.
Previously, this prevented promoted standby servers from being upgraded
because of a missing WAL history file. (Timeline 1 doesn't need a
history file, and we don't copy WAL files anyway.)
Report by Christian Echerer(?), Alexey Klyukin
Backpatch through 9.0
This patch causes pg_upgrade to error out during its check phase if:
(1) template0 is marked connectable
or
(2) any other database is marked non-connectable
This is done because, in the first case, pg_upgrade would fail because
the pg_dumpall --globals restore would fail, and in the second case, the
database would not be restored, leading to data loss.
Report by Matt Landry (1), Stephen Frost (2)
Backpatch through 9.0
This SQL standard functionality allows to aggregate data by different
GROUP BY clauses at once. Each grouping set returns rows with columns
grouped by in other sets set to NULL.
This could previously be achieved by doing each grouping as a separate
query, conjoined by UNION ALLs. Besides being considerably more concise,
grouping sets will in many cases be faster, requiring only one scan over
the underlying data.
The current implementation of grouping sets only supports using sorting
for input. Individual sets that share a sort order are computed in one
pass. If there are sets that don't share a sort order, additional sort &
aggregation steps are performed. These additional passes are sourced by
the previous sort step; thus avoiding repeated scans of the source data.
The code is structured in a way that adding support for purely using
hash aggregation or a mix of hashing and sorting is possible. Sorting
was chosen to be supported first, as it is the most generic method of
implementation.
Instead of, as in an earlier versions of the patch, representing the
chain of sort and aggregation steps as full blown planner and executor
nodes, all but the first sort are performed inside the aggregation node
itself. This avoids the need to do some unusual gymnastics to handle
having to return aggregated and non-aggregated tuples from underlying
nodes, as well as having to shut down underlying nodes early to limit
memory usage. The optimizer still builds Sort/Agg node to describe each
phase, but they're not part of the plan tree, but instead additional
data for the aggregation node. They're a convenient and preexisting way
to describe aggregation and sorting. The first (and possibly only) sort
step is still performed as a separate execution step. That retains
similarity with existing group by plans, makes rescans fairly simple,
avoids very deep plans (leading to slow explains) and easily allows to
avoid the sorting step if the underlying data is sorted by other means.
A somewhat ugly side of this patch is having to deal with a grammar
ambiguity between the new CUBE keyword and the cube extension/functions
named cube (and rollup). To avoid breaking existing deployments of the
cube extension it has not been renamed, neither has cube been made a
reserved keyword. Instead precedence hacking is used to make GROUP BY
cube(..) refer to the CUBE grouping sets feature, and not the function
cube(). To actually group by a function cube(), unlikely as that might
be, the function name has to be quoted.
Needs a catversion bump because stored rules may change.
Author: Andrew Gierth and Atri Sharma, with contributions from Andres Freund
Reviewed-By: Andres Freund, Noah Misch, Tom Lane, Svenne Krap, Tomas
Vondra, Erik Rijkers, Marti Raudsepp, Pavel Stehule
Discussion: CAOeZVidmVRe2jU6aMk_5qkxnB7dfmPROzM7Ur8JPW5j8Y5X-Lw@mail.gmail.com
DST law changes in Egypt, Mongolia, Palestine.
Historical corrections for Canada and Chile.
Revised zone abbreviation for America/Adak (HST/HDT not HAST/HADT).
This lets BRIN be used with R-Tree-like indexing strategies.
Also provided are operator classes for range types, box and inet/cidr.
The infrastructure provided here should be sufficient to create operator
classes for similar datatypes; for instance, opclasses for PostGIS
geometries should be doable, though we didn't try to implement one.
(A box/point opclass was also submitted, but we ripped it out before
commit because the handling of floating point comparisons in existing
code is inconsistent and would generate corrupt indexes.)
Author: Emre Hasegeli. Cosmetic changes by me
Review: Andreas Karlsson
For upcoming BRIN opclasses, it's convenient to have strategy numbers
defined in a single place. Since there's nothing appropriate, create
it. The StrategyNumber typedef now lives there, as well as existing
strategy numbers for B-trees (from skey.h) and R-tree-and-friends (from
gist.h). skey.h is forced to include stratnum.h because of the
StrategyNumber typedef, but gist.h is not; extensions that currently
rely on gist.h for rtree strategy numbers might need to add a new
A few .c files can stop including skey.h and/or gist.h, which is a nice
side benefit.
Per discussion:
https://www.postgresql.org/message-id/20150514232132.GZ2523@alvh.no-ip.org
Authored by Emre Hasegeli and Álvaro.
(It's not clear to me why bootscanner.l has any #include lines at all.)
Our previous code for GB18030 <-> UTF8 conversion only covered Unicode code
points up to U+FFFF, but the actual spec defines conversions for all code
points up to U+10FFFF. That would be rather impractical as a lookup table,
but fortunately there is a simple algorithmic conversion between the
additional code points and the equivalent GB18030 byte patterns. Make use
of the just-added callback facility in LocalToUtf/UtfToLocal to perform the
additional conversions.
Having created the infrastructure to do that, we can use the same code to
map certain linearly-related subranges of the Unicode space below U+FFFF,
allowing removal of the corresponding lookup table entries. This more
than halves the lookup table size, which is a substantial savings;
utf8_and_gb18030.so drops from nearly a megabyte to about half that.
In support of doing that, replace ISO10646-GB18030.TXT with the data file
gb-18030-2000.xml (retrieved from
http://source.icu-project.org/repos/icu/data/trunk/charset/data/xml/ )
in which these subranges have been deleted from the simple lookup entries.
Per bug #12845 from Arjen Nienhuis. The conversion code added here is
based on his proposed patch, though I whacked it around rather heavily.
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
The expected-output files for these tests were broken by the recent
addition of a warning for hash indexes. Update them.
Also add a test case for GB18030 encoding, similar to the other ones.
This is a pretty weak test, but it's better than nothing.
The expected output contained some floating point values which might get
rounded slightly differently on different platforms. The exact output isn't
very interesting in this test, so just round it.
Per buildfarm member rover_firefly.
We can only support a lossy distance function when the distance function's
datatype is comparable with the original ordering operator's datatype.
The distance function always returns a float8, so we are limited to float8,
and float4 (by a hard-coded cast of the float8 to float4).
In light of this limitation, it seems like a good idea to have a separate
'recheck' flag for the ORDER BY expressions, so that if you have a non-lossy
distance function, it still works with lossy quals. There are cases like
that with the build-in or contrib opclasses, but it's plausible.
There was a hidden assumption that the ORDER BY values returned by GiST
match the original ordering operator's return type, but there are plenty
of examples where that's not true, e.g. in btree_gist and pg_trgm. As long
as the distance function is not lossy, we can tolerate that and just not
return the distance to the executor (or rather, always return NULL). The
executor doesn't need the distances if there are no lossy results.
There was another little bug: the recheck variable was not initialized
before calling the distance function. That revealed the bigger issue,
as the executor tried to reorder tuples that didn't need reordering, and
that failed because of the datatype mismatch.
The previous coding effectively only verified that the second byte of a
multibyte character was in the expected range; moreover, it wasn't careful
to make sure that the second byte even exists in the buffer before touching
it. The latter seems unlikely to cause any real problems in the field
(in particular, it could never be a problem with null-terminated input),
but it's still a bug.
Since GB18030 is not a supported backend encoding, the only thing we'd
really be doing with GB18030 text is converting it to UTF8 in LocalToUtf,
which would fail anyway on any invalid character for lack of a match in
its lookup table. So the only user-visible consequence of this change
should be that you'll get "invalid byte sequence for encoding" rather than
"character has no equivalent" for malformed GB18030 input. However,
impending changes to the GB18030 conversion code will require these tighter
up-front checks to avoid producing bogus results.
Tom Lane
Fujii Masao
Bruce Momjian
Andrew Dunstan
Alvaro Herrera
Heikki Linnakangas
Andres Freund
Simon Riggs
Peter Eisentraut
Robert Haas
Noah Misch
Magnus Hagander