test_extensions' test_ext_cine extension has the same upgrade hazard
as test_ext7: the regression test leaves it in an updated state
from which no downgrade path to default is provided. This causes
the update_extensions.sql script helpfully provided by pg_upgrade
to fail. So drop it in cross-version-upgrade testing.
Not entirely sure how come I didn't hit this in testing yesterday;
possibly I'd built the upgrade reference databases with
testmodules-install-check disabled.
Backpatch to v10 where this module was introduced.
To test pg_upgrade across major PG versions, we have to be able to
modify or drop any old objects with no-longer-supported properties,
and we have to be able to deal with cosmetic changes in pg_dump output.
Up to now, the buildfarm and pg_upgrade's own test infrastructure had
separate implementations of the former, and we had nothing but very
ad-hoc rules for the latter (including an arbitrary threshold on how
many lines of unchecked diff were okay!). This patch creates a Perl
module that can be shared by both those use-cases, and adds logic
that deals with pg_dump output diffs in a much more tightly defined
fashion.
This largely supersedes previous efforts in commits 0df9641d3,
9814ff550, and 62be9e4cd, which developed a SQL-script-based solution
for the task of dropping old objects. There was nothing fundamentally
wrong with that work in itself, but it had no basis for solving the
output-formatting problem. The most plausible way to deal with
formatting is to build a Perl module that can perform editing on the
dump files; and once we commit to that, it makes more sense for the
same module to also embed the knowledge of what has to be done for
dropping old objects.
Back-patch versions of the helper module as far as 9.2, to
support buildfarm animals that still test that far back.
It's also necessary to back-patch PostgreSQL/Version.pm,
because the new code depends on that. I fixed up pg_upgrade's
002_pg_upgrade.pl in v15, but did not look into back-patching
it further than that.
Tom Lane and Andrew Dunstan
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
In commit 8bf6ec3ba I assumed that no code path could reach
ExecGetExtraUpdatedCols without having gone through
ExecInitStoredGenerated. That turns out not to be the case in
logical replication: if there's an ON UPDATE trigger on the target
table, trigger.c will call this code before anybody has set up its
generated columns. Having seen that, I don't have a lot of faith in
there not being other such paths. ExecGetExtraUpdatedCols can call
ExecInitStoredGenerated for itself, as long as we are willing to
assume that it is only called in CMD_UPDATE operations, which on
the whole seems like a safer leap of faith.
Per report from Vitaly Davydov.
Discussion: https://postgr.es/m/d259d69652b8c2ff50e14cda3c236c7f@postgrespro.ru
The WAIT_USE_EPOLL and WAIT_USE_KQUEUE implementations of
WaitEventSetWaitBlock() confused the size of their internal buffer with
the size of the caller's output buffer, and could ask the kernel for too
many events. In fact the set of events retrieved from the kernel needs
to be able to fit in both buffers, so take the smaller of the two.
The WAIT_USE_POLL and WAIT_USE WIN32 implementations didn't have this
confusion.
This probably didn't come up before because we always used the same
number in both places, but commit 7389aad6 calculates a dynamic size at
construction time, while using MAXLISTEN for its output event buffer on
the stack. That seems like a reasonable thing to want to do, so
consider this to be a pre-existing bug worth fixing.
As discovered by valgrind on skink.
Back-patch to all supported releases for epoll, and to release 13 for
the kqueue part, which copied the incorrect epoll code.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/901504.1673504836%40sss.pgh.pa.us
The current jsonpath code assumes that the referenced variable always exists.
It could only throw an error at the value valuation time. At the same time
existence checking assumes variable is present without valuation, and error
suppression doesn't work for missing variables.
This commit makes existense checking trigger an error for missing variables.
This makes the overall behavior consistent.
Backpatch to 12 where jsonpath was introduced.
Reported-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwbeytffJkVnEqDyLZ%3DrQsznoTh1OgDoOF3VmOMkxcTMjA%40mail.gmail.com
Author: Alexander Korotkov, David G. Johnston
Backpatch-through: 12
After restart, we try to stream the changes for large transactions that
were not sent before server crash and restart. However, we forget to send
the abort message for such transactions. This leads to spurious streaming
files on the subscriber which won't be cleaned till the apply worker or
the subscriber server restarts.
Reported-by: Dilip Kumar
Author: Hou Zhijie
Reviewed-by: Dilip Kumar and Amit Kapila
Backpatch-through: 14
Discussion: https://postgr.es/m/OS0PR01MB5716A773F46768A1B75BE24394FB9@OS0PR01MB5716.jpnprd01.prod.outlook.com
The ALTER DATABASE|FUNCTION|PROCEDURE|ROLE|ROUTINE|USER ... SET <name>
case in psql tab completion failed to exclude <name> = "SCHEMA", which
caused ALTER FUNCTION|PROCEDURE|ROUTINE ... SET SCHEMA to complete
with "FROM CURRENT" and "TO", which won't work.
Fix that, so that those cases now complete with the list of schemas,
like other ALTER ... SET SCHEMA commands.
Noticed while testing the recent patch to improve tab completion for
ALTER FUNCTION/PROCEDURE/ROUTINE, but this is not directly related to
that patch. Rather, this is a long-standing bug, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/CALDaNm0s7GQmkLP_mx5Cvk=UzYMnjhPmXBxU8DsHEunFbC5sTg@mail.gmail.com
Commit 57faaf376 added pg_truncate(const char *path, off_t length), but
"length" was ignored under WIN32 and the file was unconditionally
truncated to 0.
There was no live bug, since the only caller passes 0.
Fix, and back-patch to 14 where the function arrived.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20230106031652.GR3109%40telsasoft.com
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
While on it, newlines are removed from the end of two elog() strings.
The others are simple grammar mistakes. One comment in pg_upgrade
referred incorrectly to sequences since a7e5457.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221230231257.GI1153@telsasoft.com
Backpatch-through: 11
New versions of perl trigger warnings within perl.h with our compiler
flags. At least -Wdeclaration-after-statement, -Wshadow=compatible-local are
known to be problematic.
To avoid these warnings, conditionally use #pragma GCC system_header before
including plperl.h.
Alternatively, we could add the include paths for problematic headers with
-isystem, but that is a larger hammer and is harder to search for.
A more granular alternative would be to use #pragma GCC diagnostic
push/ignored/pop, but gcc warns about unknown warnings being ignored, so every
to-be-ignored-temporarily compiler warning would require its own pg_config.h
symbol and #ifdef.
As the warnings are voluminous, it makes sense to backpatch this change. But
don't do so yet, we first want gather buildfarm coverage - it's e.g. possible
that some compiler claiming to be gcc compatible has issues with the pragma.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: Discussion: https://postgr.es/m/20221228182455.hfdwd22zztvkojy2@awork3.anarazel.de
When considering an empty grouping set, we fetched
phasedata->eqfunctions[-1]. Because the eqfunctions array is
palloc'd, that would always be an aset pointer in released versions,
and thus the code accidentally failed to malfunction (since it would
do nothing unless it found a null pointer). Nonetheless this seems
like trouble waiting to happen, so add a check for length == 0.
It's depressing that our valgrind testing did not catch this.
Maybe we should reconsider the choice to not mark that word NOACCESS?
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-vZuuPOZsKOYnSAaPYGKhmacxhki+vpOKk0O7rymccXQ@mail.gmail.com
When brin_minmax_multi_union merges summaries, we may end up with just a
single range after merge_overlapping_ranges. The summaries may contain
just one range each, and they may overlap (or be exactly the same).
With a single range there's no distance to calculate, but we happen to
call build_distances anyway - which is fine, we don't calculate the
distance in this case, except that with asserts this failed due to a
check there are at least two ranges.
The assert is unnecessarily strict, so relax it a bit and bail out if
there's just a single range. The relaxed assert would be enough, but
this way we don't allocate unnecessary memory for distance.
Backpatch to 14, where minmax-multi opclasses were introduced.
Reported-by: Jaime Casanova
Backpatch-through: 14
Discussion: https://postgr.es/m/YzVA55qS0hgz8P3r@ahch-to
The query used to disable WITH OIDS in all the relations making use of
it was checking for materialized views, but this is not a supported
operation. On the contrary, this needs to be done on foreign tables.
While on it, use quote_ident() in the ALTER TABLE strings built on the
relation name.
Author: Anton A. Melnikov, Michael Paquier
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
Backpatch-through: 12
Three error strings used with cache lookup failures were referring to
incorrect object types for ACL checks:
- Schemas
- Types
- Foreign Servers
There errors should never be triggered, but if they do incorrect
information would be reported.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221222153041.GN1153@telsasoft.com
Backpatch-through: 11
Andrey Lepikhov demonstrated a case where we spend an unreasonable
amount of time in pull_up_subqueries(). Not only is that recursing
with no explicit check for stack overrun, but the code seems not
interruptable by control-C. Let's stick a CHECK_FOR_INTERRUPTS
there, along with sprinkling some stack depth checks.
An actual fix for the excessive time consumption seems a bit
risky to back-patch; but this isn't, so let's do so.
Discussion: https://postgr.es/m/703c09a2-08f3-d2ec-b33d-dbecd62428b8@postgrespro.ru
Such references failed with "cache lookup failed for type 0"
because we didn't resolve the type of the CYCLE column until after
analyzing the CTE's query. We can just move that processing
to before the recursive parse_sub_analyze call, though.
While here, invent a couple of local variables to make this
code less egregiously wider-than-80-columns.
Per bug #17723 from Vik Fearing. Back-patch to v14 where
the CYCLE feature was added.
Discussion: https://postgr.es/m/17723-2c4985ff111e7bba@postgresql.org
It seems that drop-index-concurrently-1 has started to forget what it was
originally meant to be testing. d2d8a229b, which added incremental sorts
changed the expected plan to be an Index Scan plan instead of a Seq Scan
plan. This occurred as the primary key index of the table in question
provided presorted input and, because that index happened to be the
cheapest input path due to enable_seqscan being disabled, the incremental
sort changes just added a Sort on top of that. It seems based on the name
of the PREPAREd statement that the intention here is that the query
produces a seqscan plan.
The reason this test has become broken seems to be due to how the test was
originally coded. The test was trying to force a seqscan plan by
performing some casting to make it so the test_dc index couldn't be used
to perform the required filtering. Trying to coax the planner into using
a plan which has costed in a disable_cost seems like it's always going to
be flakey as small changes in costs are drowned out by the large
disable_cost combined with add_path's STD_FUZZ_FACTOR. Here we get rid of
the casts that we're using to try to trick the planner into a seqscan and
instead toggle enable_seqscan as and when required to get the desired
plan.
Additionally, rename a few things in the test and add some additional
wording to the comments to try and make it more clear in the future what
we expect this test to be doing.
Discussion: https://postgr.es/m/CAApHDvrbDhObhLV+=U_K_-t+2Av2av1aL9d+2j_3AO-XndaviA@mail.gmail.com
Backpatch-through: 13, where d2d8a229b changed the expected test output
Commits f92944137 et al. made IsInTransactionBlock() set the
XACT_FLAGS_NEEDIMMEDIATECOMMIT flag before returning "false",
on the grounds that that kept its API promises equivalent to those of
PreventInTransactionBlock(). This turns out to be a bad idea though,
because it allows an ANALYZE in a pipelined series of commands to
cause an immediate commit, which is unexpected.
Furthermore, if we return "false" then we have another issue,
which is that ANALYZE will decide it's allowed to do internal
commit-and-start-transaction sequences, thus possibly unexpectedly
committing the effects of previous commands in the pipeline.
To fix the latter situation, invent another transaction state flag
XACT_FLAGS_PIPELINING, which explicitly records the fact that we
have executed some extended-protocol command and not yet seen a
commit for it. Then, require that flag to not be set before allowing
InTransactionBlock() to return "false".
Having done that, we can remove its setting of NEEDIMMEDIATECOMMIT
without fear of causing problems. This means that the API guarantees
of IsInTransactionBlock now diverge from PreventInTransactionBlock,
which is mildly annoying, but it seems OK given the very limited usage
of IsInTransactionBlock. (In any case, a caller preferring the old
behavior could always set NEEDIMMEDIATECOMMIT for itself.)
For consistency also require XACT_FLAGS_PIPELINING to not be set
in PreventInTransactionBlock. This too is meant to prevent commands
such as CREATE DATABASE from silently committing previous commands
in a pipeline.
Per report from Peter Eisentraut. As before, back-patch to all
supported branches (which sadly no longer includes v10).
Discussion: https://postgr.es/m/65a899dd-aebc-f667-1d0a-abb89ff3abf8@enterprisedb.com
jsonb_get_element() was incautious enough to use VARDATA() and
VARSIZE() directly on an arbitrary text Datum. That of course
fails if the Datum is short-header, compressed, or out-of-line.
The typical result would be failing to match any element of a
jsonb object, though matching the wrong one seems possible as well.
setPathObject() was slightly brighter, in that it used VARDATA_ANY
and VARSIZE_ANY_EXHDR, but that only kept it out of trouble for
short-header Datums. push_path() had the same issue. This could
result in faulty subscripted insertions, though keys long enough to
cause a problem are likely rare in the wild.
Having seen these, I looked around for unsafe usages in the rest
of the adt/json* files. There are a couple of places where it's not
immediately obvious that the Datum can't be compressed or out-of-line,
so I added pg_detoast_datum_packed() to cope if it is. Also, remove
some other usages of VARDATA/VARSIZE on Datums we just extracted from
a text array. Those aren't actively broken, but they will become so
if we ever start allowing short-header array elements, which does not
seem like a terribly unreasonable thing to do. In any case they are
not great coding examples, and they could also do with comments
pointing out that we're assuming we don't need pg_detoast_datum_packed.
Per report from exe-dealer@yandex.ru. Patch by me, but thanks to
David Johnston for initial investigation. Back-patch to v14 where
jsonb subscripting was introduced.
Discussion: https://postgr.es/m/205321670615953@mail.yandex.ru
In commit ffbb7e65a, I added a ModifyTableState member to ResultRelInfo
to save the owning ModifyTableState for use by nodeModifyTable.c when
performing batch inserts, but as pointed out by Tom Lane, that changed
the array stride of es_result_relations, and that would break any
previously-compiled extension code that accesses that array. Fix by
removing that member from ResultRelInfo and instead adding a List member
at the end of EState to save such ModifyTableStates.
Per report from Tom Lane. Back-patch to v14, like the previous commit;
I chose to apply the patch to HEAD as well, to make back-patching easy.
Discussion: http://postgr.es/m/4065383.1669395453%40sss.pgh.pa.us
A couple of places weren't up to speed for this. By sheer good
luck, we didn't fail but just selected a non-memoized join plan,
at least in the test case we have. Nonetheless, it's a bug,
and I'm not quite sure that it couldn't have worse consequences
in other examples. So back-patch to v14 where Memoize came in.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs48GkNom272sfp0-WeD6_0HSR19BJ4H1c9ZKSfbVnJsvRg@mail.gmail.com
It neglected to recurse to the subpath, meaning you'd get back
a path identical to the input. This could produce wrong query
results if the omission meant that the subpath fails to enforce
some join clause it should be enforcing. We don't have a test
case for this at the moment, but the code is obviously broken
and the fix is equally obvious. Back-patch to v14 where
Memoize was introduced.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_R=ORpz=Lkn2q3ebPC5EuWyfZF+tmfCPVLBVK5W39mHA@mail.gmail.com
We might fail to generate a partitionwise join, because
reparameterize_path_by_child() does not support all path types.
This should not be a hard failure condition: we should just fall back
to a non-partitioned join. However, generate_partitionwise_join_paths
did not consider this possibility and would emit the (misleading)
error "could not devise a query plan for the given query" if we'd
failed to make any paths for a child join. Fix it to give up on
partitionwise joining if so. (The accepted technique for giving up
appears to be to set rel->nparts = 0, which I find pretty bizarre,
but there you have it.)
I have not added a test case because there'd be little point:
any omissions of this sort that we identify would soon get fixed
by extending reparameterize_path_by_child(), so the test would stop
proving anything. However, right now there is a known test case based
on failure to cover MaterialPath, and with that I've found that this
is broken in all supported versions. Hence, patch all the way back.
Original report and patch by me; thanks to Richard Guo for
identifying a test case that works against committed versions.
Discussion: https://postgr.es/m/1854233.1669949723@sss.pgh.pa.us
When updating a relation with a rule whose action performed an INSERT
from a multi-row VALUES list, the rewriter might skip processing the
VALUES list, and therefore fail to replace any DEFAULTs in it. This
would lead to an "unrecognized node type" error.
The reason was that RewriteQuery() assumed that a query doing an
INSERT from a multi-row VALUES list would necessarily only have one
item in its fromlist, pointing to the VALUES RTE to read from. That
assumption is correct for the original query, but not for product
queries produced for rule actions. In such cases, there may be
multiple items in the fromlist, possibly including multiple VALUES
RTEs.
What is required instead is for RewriteQuery() to skip any RTEs from
the product query's originating query, which might include one or more
already-processed VALUES RTEs. What's left should then include at most
one VALUES RTE (from the rule action) to be processed.
Patch by me. Thanks to Tom Lane for reviewing.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAEZATCV39OOW7LAR_Xq4i%2BLc1Byux%3DeK3Q%3DHD_pF1o9LBt%3DphA%40mail.gmail.com
When the relkind of a relache entry changes, because a table is converted into
a view, pgstats can get confused in 15+, leading to crashes or assertion
failures.
For HEAD, Tom fixed this in b23cd185fd, by removing support for converting a
table to a view, removing the source of the inconsistency. This commit just
adds an assertion that a relcache entry's relkind does not change, just in
case we end up with another case of that in the future. As there's no cases of
changing relkind anymore, we can't add a test that that's handled correctly.
For 15, fix the problem by not maintaining the association with the old pgstat
entry when the relkind changes during a relcache invalidation processing. In
that case the pgstat entry needs to be unlinked first, to avoid
PgStat_TableStatus->relation getting out of sync. Also add a test reproducing
the issues.
No known problem exists in 11-14, so just add the test there.
Reported-by: vignesh C <vignesh21@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CALDaNm2yXz+zOtv7y5zBd5WKT8O0Ld3YxikuU3dcyCvxF7gypA@mail.gmail.com
Discussion: https://postgr.es/m/CALDaNm3oZA-8Wbps2Jd1g5_Gjrr-x3YWrJPek-mF5Asrrvz2Dg@mail.gmail.com
Backpatch: 15-
Some options of these commands need to be able to identify the start
of the function body within the output of pg_get_functiondef().
It used to be that that always began with "AS", but since the
introduction of new-style SQL functions, it might also start with
"BEGIN" or "RETURN". Fix that on the psql side, and add some
regression tests.
Noted by me awhile ago, but I didn't do anything about it.
Thanks to David Johnston for a nag.
Discussion: https://postgr.es/m/AM9PR01MB8268D5CDABDF044EE9F42173FE8C9@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
In commit 40c24bfef, I forgot to use get_rule_expr_paren() for the
arguments of AT TIME ZONE, resulting in possibly not printing parens
for expressions that need it. But get_rule_expr_paren() wouldn't have
gotten it right anyway, because isSimpleNode() hadn't been taught that
COERCE_SQL_SYNTAX parent nodes don't guarantee sufficient parentheses.
Improve all that. Also use this methodology for F_IS_NORMALIZED, so
that we don't print useless parens for that.
In passing, remove a comment that was obsoleted later.
Per report from Duncan Sands. Back-patch to v14 where this code
came in. (Before that, we didn't try to print AT TIME ZONE that way,
so there was no bug just ugliness.)
Discussion: https://postgr.es/m/f41566aa-a057-6628-4b7c-b48770ecb84a@deepbluecap.com
Writing "pg_regress --dbname= ..." led to a crash, because
we weren't expecting there to be no database name supplied.
It doesn't seem like a great idea to run regression tests
in whatever is the user's default database; so rather than
supporting this case let's explicitly reject it.
Per report from Xing Guo. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CACpMh+A8cRvtvtOWVAZsCM1DU81GK4DL26R83y6ugZ1osV=ifA@mail.gmail.com
The frontend-side routine in charge of building a SCRAM verifier
mentioned that the restrictions applying to SASLprep on the password
with the encoding are described at the top of fe-auth-scram.c, but this
information is in auth-scram.c.
This is wrong since 8f8b9be, so backpatch all the way down as this is an
important documentation bit.
Spotted while reviewing a different patch.
Backpatch-through: 11
Previously, we'd compress only when the active range of array entries
reached Max(4 * PROCARRAY_MAXPROCS, 2 * pArray->numKnownAssignedXids).
If max_connections is large, the first term could result in not
compressing for a long time, resulting in much wastage of cycles in
hot-standby backends scanning the array to take snapshots. Get rid
of that term, and just bound it to 2 * pArray->numKnownAssignedXids.
That however creates the opposite risk, that we might spend too much
effort compressing. Hence, consider compressing only once every 128
commit records. (This frequency was chosen by benchmarking. While
we only tried one benchmark scenario, the results seem stable over
a fairly wide range of frequencies.)
Also, force compression when processing RecoveryInfo WAL records
(which should be infrequent); the old code could perform compression
then, but would do so only after the same array-range check as for
the transaction-commit path.
Also, opportunistically run compression if the startup process is about
to wait for WAL, though not oftener than once a second. This should
prevent cases where we waste lots of time by leaving the array
not-compressed for long intervals due to low WAL traffic.
Lastly, add a simple check to keep us from uselessly compressing
when the array storage is already compact.
Back-patch, as the performance problem is worse in pre-v14 branches
than in HEAD.
Simon Riggs and Michail Nikolaev, with help from Tom Lane and
Andres Freund.
Discussion: https://postgr.es/m/CALdSSPgahNUD_=pB_j=1zSnDBaiOtqVfzo8Ejt5J_k7qZiU1Tw@mail.gmail.com
This is an oversight in commit 7c337b6b5: I apparently didn't think
about the possibility of a SQL function being executed multiple
times within a query. In that case, functions.c's primitive caching
mechanism allows the same utility parse tree to be presented for
execution more than once. We have to tell ProcessUtility to make
a working copy of the parse tree, or bad things happen.
Normally I'd add a regression test, but I think the reported crasher
is dependent on some rather random implementation choices that are
nowhere near functions.c, so its usefulness as a long-lived test
feels questionable. In any case, this fix is clearly correct given
the design choices of 7c337b6b5.
Per bug #17702 from Xin Wen. Thanks to Daniel Gustafsson for
analysis. Back-patch to v14 where the faulty commit came in
(before that, the responsibility for copying scribble-able
utility parse trees lay elsewhere).
Discussion: https://postgr.es/m/17702-ad24fdcdd1e9047a@postgresql.org
The JOIN_SEMI case Assert'ed that there are no PlaceHolderVars that
need to be evaluated at the semijoin's RHS, which is wrong because
there could be some in the semijoin's qual condition. However, there
could not be any references further up than that, and within the qual
there is not any way that such a PHV could have gone to null yet, so
we don't really need the PHV and there is no need to avoid making the
RHS-removal optimization. The upshot is that there's no actual bug
in production code, and we ought to just remove this misguided Assert.
While we're here, also drop the JOIN_RIGHT case, which is dead code
because reduce_outer_joins() already got rid of JOIN_RIGHT.
Per bug #17700 from Xin Wen. Uselessness of the JOIN_RIGHT case
pointed out by Richard Guo. Back-patch to v12 where this code
was added.
Discussion: https://postgr.es/m/17700-2b5c10d917c30687@postgresql.org
When loading plperl built against Strawberry perl or the msys2 ucrt perl
that have been built with gcc, a binary mismatch has been encountered
which looks like this:
loadable library and perl binaries are mismatched (got handshake key 0000000012800080, needed 0000000012900080)
To cure this we bring the handshake keys into sync by adding
NO_THREAD_SAFE_LOCALE to the defines used to build plperl.
Discussion: https://postgr.es/m/20211005004334.tgjmro4kuachwiuc@alap3.anarazel.de
Discussion: https://postgr.es/m/c2da86a0-2906-744c-923d-16da6047875e@dunslane.net
Backpatch to all live branches.
Strawberry uses __builtin_expect which Visual C doesn't have. For this
case define it as a noop. Solution taken from vim sources.
Backpatch to all live branches
Commit b663a4136, which allowed FDWs to INSERT rows in bulk, added to
nodeModifyTable.c code to flush pending inserts to the foreign-table
result relation(s) before completing processing of the ModifyTable node,
but the code failed to take into account the case where the INSERT query
has modifying CTEs, leading to incorrect results.
Also, that commit failed to flush pending inserts before firing BEFORE
ROW triggers so that rows are visible to such triggers.
In that commit we scanned through EState's
es_tuple_routing_result_relations or es_opened_result_relations list to
find the foreign-table result relations to which pending inserts are
flushed, but that would be inefficient in some cases. So to fix, 1) add
a List member to EState to record the insert-pending result relations,
and 2) modify nodeModifyTable.c so that it adds the foreign-table result
relation to the list in ExecInsert() if appropriate, and flushes pending
inserts properly using the list where needed.
While here, fix a copy-and-pasteo in a comment in ExecBatchInsert(),
which was added by that commit.
Back-patch to v14 where that commit appeared.
Discussion: https://postgr.es/m/CAPmGK16qutyCmyJJzgQOhfBq%3DNoGDqTB6O0QBZTihrbqre%2BoxA%40mail.gmail.com
In commit 272248a0c, we introduced an InitialRunningXacts array to
remember transactions and subtransactions that were running when the
xl_running_xacts record that we decoded was written. This array was
allocated in the snapshot builder memory context after we restore
serialized snapshot but we forgot to reset the array while freeing the
builder memory context. So, the next time when we start decoding in the
same session where we don't restore any serialized snapshot, we ended up
using the uninitialized array and that can lead to unpredictable behavior.
This problem doesn't exist in HEAD as instead of using
InitialRunningXacts, we added the list of transaction IDs and
sub-transaction IDs, that have modified catalogs and are running during
snapshot serialization, to the serialized snapshot (see commit 7f13ac8123).
Reported-by: Maxim Orlov
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Maxim Orlov
Backpatch-through: 11
Discussion: https://postgr.es/m/CACG=ezZoz_KG+Ryh9MrU_g5e0HiVoHocEvqFF=NRrhrwKmEQJQ@mail.gmail.com
We've made multiple attempts at preventing get_actual_variable_range
from taking an unreasonable amount of time (3ca930fc3, fccebe421).
But there's still an issue for the very first planning attempt after
deletion of a large number of extremal-valued tuples. While that
planning attempt will set "killed" bits on the tuples it visits and
thereby reduce effort for next time, there's still a lot of work it
has to do to visit the heap and then set those bits. It's (usually?)
not worth it to do that much work at plan time to have a slightly
better estimate, especially in a context like this where the table
contents are known to be mutating rapidly.
Therefore, let's bound the amount of work to be done by giving up
after we've visited 100 heap pages. Giving up just means we'll
fall back on the extremal value recorded in pg_statistic, so it
shouldn't mean that planner estimates suddenly become worthless.
Note that this means we'll still gradually whittle down the problem
by setting a few more index "killed" bits in each planning attempt;
so eventually we'll reach a good state (barring further deletions),
even in the absence of VACUUM.
Simon Riggs, per a complaint from Jakub Wartak (with cosmetic
adjustments by me). Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAKZiRmznOwi0oaV=4PHOCM4ygcH4MgSvt8=5cu_vNCfc8FSUug@mail.gmail.com
Currently there is a race condition where if concurrent TAP tests both
test that they can open a port they will assume that it is free and use
it, causing one of them to fail. To prevent this we record a reservation
using an exclusive lock, and any TAP test that discovers a reservation
checks to see if the reserving process is still alive, and looks for
another free port if it is.
Ports are reserved in a directory set by the environment setting
PG_TEST_PORT_DIR, or if that doesn't exist a subdirectory of the top
build directory as set by Makefile.global, or its own
tmp_check directory.
The prove_check recipe in Makefile.global.in is extended to export
top_builddir to the TAP tests. This was already exported by the
prove_installcheck recipes.
Per complaint from Andres Freund
Backpatched from 9b4eafcaf4 to all live branches
Discussion: https://postgr.es/m/20221002164931.d57hlutrcz4d2zi7@awork3.anarazel.de
Once a logical slot has acquired a catalog_xmin, it doesn't let go of
it, even when invalidated by exceeding the max_slot_wal_keep_size, which
means that dead catalog tuples are not removed by vacuum anymore since
the point is invalidated, until the slot is dropped. This could be
catastrophic if catalog churn is high.
Change the computation of Xmin to ignore invalidated slots,
to prevent dead rows from accumulating.
Backpatch to 13, where slot invalidation appeared.
Author: Sirisha Chamarthi <sirichamarthi22@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/CAKrAKeUEDeqquN9vwzNeG-CN8wuVsfRYbeOUV9qKO_RHok=j+g@mail.gmail.com
I just spent an annoying amount of time reverse-engineering the
100%-undocumented API between ts_headline and the text search
parser's prsheadline function. Add some commentary about that
while it's fresh in mind. Also remove some unused macros in
wparser_def.c.
While at it, I noticed that when commit 78e73e875 added a
CHECK_FOR_INTERRUPTS call in TS_execute_recurse, it missed
doing so in the parallel function TS_phrase_execute, which
surely needs one just as much.
Back-patch because of the missing CHECK_FOR_INTERRUPTS.
Might as well back-patch the rest of this too.
ProcSleep() used a PGPROC* variable to point to PROC_QUEUE->links.next,
because that does "the right thing" with SHMQueueInsertBefore(). While that
largely works, it's certainly not correct and unnecessary - we can just use
SHM_QUEUE* to point to the insertion point.
Noticed when testing a 32bit of postgres with undefined behavior
sanitizer. UBSan noticed that sometimes the supposed PGPROC wasn't
sufficiently aligned (required since 46d6e5f567, ensured indirectly, via
ShmemAllocRaw() guaranteeing cacheline alignment).
For now fix this by using a SHM_QUEUE* for the insertion point. Subsequently
we should replace all the use of PROC_QUEUE and SHM_QUEUE with ilist.h, but
that's a larger change that we don't want to backpatch.
Backpatch to all supported versions - it's useful to be able to run postgres
under UBSan.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221117014230.op5kmgypdv2dtqsf@awork3.anarazel.de
Backpatch: 11-
basics.source is supposed to be pretty closely in step with
the examples in chapter 2 of the tutorial, but I forgot to
update it in commit f05a5e000. Fix that, and adjust a couple
of other discrepancies that had crept in over time.
(I notice that advanced.source is nowhere near being in sync
with chapter 3, but I lack the ambition to do something
about that right now.)
Version strings with unequal numbers of parts were being compared
incorrectly. We cure this by treating a missing part in the shorter
version as 0.
per complaint from Jehan-Guillaume de Rorthais, but the fix is mine, not
his.
Discussion: https://postgr.es/m/20220628225325.53d97b8d@karst
Backpatch to release 14 where this code was introduced.
This is a back-patch of the v15-era commit f10f0ae42 into older
supported branches. The idea is to design out bugs in which an
ill-timed relcache flush clears rel->rd_smgr partway through
some code sequence that wasn't expecting that. We had another
report today of a corner case that reliably crashes v14 under
debug_discard_caches (nee CLOBBER_CACHE_ALWAYS), and therefore
would crash once in a blue moon in the field. We're unlikely
to get rid of all such code paths unless we adopt the more
rigorous coding rules instituted by f10f0ae42. Therefore,
even though this is a bit invasive, it's time to back-patch.
Some comfort can be taken in the fact that f10f0ae42 has been
in v15 for 16 months without problems.
I left the RelationOpenSmgr macro present in the back branches,
even though no core code should use it anymore, in order to not break
third-party extensions in minor releases. Such extensions might opt
to start using RelationGetSmgr instead, to reduce their code
differential between v15 and earlier branches. This carries a hazard
of failing to compile against headers from existing minor releases.
However, once compiled the extension should work fine even with such
releases, because RelationGetSmgr is a "static inline" function so
it creates no link-time dependency. So depending on distribution
practices, that might be an OK tradeoff.
Per report from Spyridon Dimitrios Agathos. Original patch
by Amul Sul.
Discussion: https://postgr.es/m/CAFM5RaqdgyusQvmWkyPYaWMwoK5gigdtW-7HcgHgOeAw7mqJ_Q@mail.gmail.com
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
During XLOG_HASH_SPLIT_ALLOCATE_PAGE replay, we were checking for a
cleanup lock on the new bucket page after acquiring an exclusive lock on
it and raising a PANIC error on failure. However, it is quite possible
that checkpointer can acquire the pin on the same page before acquiring a
lock on it, and then the replay will lead to an error. So instead, directly
acquire the cleanup lock on the new bucket page during
XLOG_HASH_SPLIT_ALLOCATE_PAGE replay operation.
Reported-by: Andres Freund
Author: Robert Haas
Reviewed-By: Amit Kapila, Andres Freund, Vignesh C
Backpatch-through: 11
Discussion: https://postgr.es/m/20220810022617.fvjkjiauaykwrbse@awork3.anarazel.de
The original report was concerned with a possible inconsistency
between the heap and the visibility map, which I was unable to
confirm. The concern has been retracted.
However, there did seem to be a torn page hazard when using
checksums. By not setting the heap page LSN during redo, the
protections of minRecoveryPoint were bypassed. Fixed, along with a
misleading comment.
It may have been impossible to hit this problem in practice, because
it would require a page tear between the checksum and the flags, so I
am marking this as a theoretical risk. But, as discussed, it did
violate expectations about the page LSN, so it may have other
consequences.
Backpatch to all supported versions.
Reported-by: Konstantin Knizhnik
Reviewed-by: Konstantin Knizhnik
Discussion: https://postgr.es/m/fed17dac-8cb8-4f5b-d462-1bb4908c029e@garret.ru
Backpatch-through: 11
The stanza "SET STORAGE may need to add a TOAST table" does not
test what it's supposed to, and hasn't done so since we added
the ability to store constant column default values as metadata.
We need to use a non-constant default to get the expected table
rewrite to actually happen.
Fix that, and add the missing checks that would have exposed the
problem to begin with.
Noted while reviewing a patch that made changes in this test case.
Back-patch to v11 where the problem came in.
In commit 450ee7012 I supposed that all platforms we now care about have
snprintf(), since that's required by C99. Turns out that Microsoft did
not get around to adding that until VS2015. We've dropped support for
VS2013 as of HEAD (cf 6203583b7), but not in the back branches, so add
a hack for this in the back branches only.
There's no easy shortcut to an exact emulation of standard snprintf
in VS2013, but fortunately we don't need one: this code was just fine
with using sprintf before 450ee7012, so we can make it do so again
on that platform (and any others where the problem might crop up).
Per bug #17681 from Daisuke Higuchi. Back-patch to v12, like the
previous patch.
Discussion: https://postgr.es/m/17681-485ba2ec13e7f392@postgresql.org
Add a little to the header comments for these functions to make it
clearer what guarantees about commit behavior are provided to callers.
(See commit f92944137 for context.)
Although this is only a comment change, it's really documentation
aimed at authors of extensions, so it seems appropriate to back-patch.
Yugo Nagata and Tom Lane, per further discussion of bug #17434.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
"Triggers on partitioned tables cannot have transition tables." is
incorrect as we allow statement-level triggers on partitioned tables to
have transition tables.
This has been wrong since commit 86f575948; back-patch to v11 where that
commit came in.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAPmGK17gk4vXLzz2iG%2BG4LWRWCoVyam70nZ3OuGm1hMJwDrhcg%40mail.gmail.com
Commit f56f8f8da6 added some code in CloneFkReferencing that's way too
lax about a Constraint node it manufactures, not initializing enough
struct members -- initially_valid in particular was forgotten. This
causes some FKs in partitions added by ALTER TABLE ATTACH PARTITION to
be marked as not validated. Set initially_valid true, which fixes the
bug.
While at it, make the struct initialization more complete. Very similar
code was added in two other places by the same commit; make them all
follow the same pattern for consistency, though no bugs are apparent
there.
This bug has never been reported: I only happened to notice while
working on commit 614a406b4f. The test case that was added there with
the improper result is repaired.
Backpatch to 12.
Discussion: https://postgr.es/m/20221005105523.bhuhkdx4olajboof@alvherre.pgsql
If a syntax error occurred in a SQL-language or PL/pgSQL-language
CREATE FUNCTION or DO command executed in a logical replication worker,
we'd suffer a null pointer dereference or assertion failure. That
seems like a rather contrived case, but nonetheless worth fixing.
The cause is that function_parse_error_transpose assumes it must be
executing within the context of a Portal, but logical/worker.c
doesn't create a Portal since it's not running the standard executor.
We can just back off the hard Assert check and make it fail gracefully
if there's not an ActivePortal. (I have a feeling that the aggressive
check here was my fault originally, probably because I wasn't sure if
the case would always hold and wanted to find out. Well, now we know.)
The hazard seems to exist in all branches that have logical replication,
so back-patch to v10.
Maxim Orlov, Anton Melnikov, Masahiko Sawada, Tom Lane
Discussion: https://postgr.es/m/b570c367-ba38-95f3-f62d-5f59b9808226@inbox.ru
Discussion: https://postgr.es/m/adf0452f-8c6b-7def-d35e-ab516c80088e@inbox.ru
Casting the result of palloc etc. to the intended type is more per
project style anyway.
(The fact that cpluspluscheck doesn't notice these problems is
because it doesn't expand any macros, which seems like a troubling
shortcoming. Don't have a good idea about improving that.)
Back-patch to v13, which is as far as the patch applies cleanly;
doesn't seem worth working harder.
David Geier
Discussion: https://postgr.es/m/aa5d88a3-71f4-3455-11cf-82de0372c941@gmail.com
If we have no special-case code in s_lock.h for the current platform,
but the compiler has __sync_lock_test_and_set, use that instead of
failing. It's unlikely that anybody's __sync_lock_test_and_set
would be so awful as to be worse than our semaphore-based fallback,
but if it is, they can (continue to) use --disable-spinlocks.
This allows removal of the RISC-V special case installed by commit
c32fcac56, which generated exactly the same code but only on that
platform. Usefully, the RISC-V buildfarm animals should now test
at least the int variant of this patch.
I've manually tested both variants on ARM by dint of removing the
ARM-specific stanza. We don't want to drop that, because it already
has some special knowledge and is likely to grow more over time.
Likewise, this is not meant to preclude installing special cases
for other arches if that proves worthwhile.
Per discussion of a request to install the same code for loongarch64.
Like the previous patch, we might as well back-patch to supported
branches.
Discussion: https://postgr.es/m/761ac43d44b84d679ba803c2bd947cc0@HSMAILSVR04.hs.handsome.com.cn
Since partitions can be foreign tables not only plain tables, but
logical replication only supports plain tables, we'd better check the
relkind of a partition after we find it. (There was some discussion
of checking this when adding a partitioned table to a subscription;
but that would be inadequate since the troublesome partition could be
added later.) Without this, the situation leads to a segfault or
assertion failure.
In passing, add a separate variable for the target Relation of
a cross-partition UPDATE; reusing partrel seemed mighty confusing
and error-prone.
Shi Yu and Tom Lane, per report from Ilya Gladyshev. Back-patch
to v13 where logical replication into partitioned tables became
a thing.
Discussion: https://postgr.es/m/6b93e3748ba43298694f376ca8797279d7945e29.camel@gmail.com
DST law changes in Chile, Fiji, Iran, Jordan, Mexico, Palestine,
and Syria. Historical corrections for Chile, Crimea, Iran, and
Mexico.
Also, the Europe/Kiev zone has been renamed to Europe/Kyiv
(retaining the old name as a link).
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Antarctica/Vostok, Asia/Brunei,
Asia/Kuala_Lumpur, Atlantic/Reykjavik, Europe/Amsterdam,
Europe/Copenhagen, Europe/Luxembourg, Europe/Monaco, Europe/Oslo,
Europe/Stockholm, Indian/Christmas, Indian/Cocos, Indian/Kerguelen,
Indian/Mahe, Indian/Reunion, Pacific/Chuuk, Pacific/Funafuti,
Pacific/Majuro, Pacific/Pohnpei, Pacific/Wake and Pacific/Wallis.
(This indirectly affects zones that were already links to one of
these: Arctic/Longyearbyen, Atlantic/Jan_Mayen, Iceland,
Pacific/Ponape, Pacific/Truk, and Pacific/Yap.) America/Nipigon,
America/Rainy_River, America/Thunder_Bay, Europe/Uzhgorod, and
Europe/Zaporozhye were also merged into nearby zones after discovering
that their claimed post-1970 differences from those zones seem to have
been errors.
While the IANA crew have been working on merging zones that have no
post-1970 differences for some time, this batch of changes affects
some zones that are significantly more populous than those merged
in the past, notably parts of Europe. The loss of pre-1970 timezone
history for those zones may be troublesome for applications
expecting consistency of timestamptz display. As an example, the
stored value '1944-06-01 12:00 UTC' would previously display as
'1944-06-01 13:00:00+01' if the Europe/Stockholm zone is selected,
but now it will read out as '1944-06-01 14:00:00+02'.
There exists a "packrat" option that will build the timezone data
files with this old data preserved, but the problem is that it also
resurrects a bunch of other, far less well-attested data; so much so
that actually more zones' contents change from 2022a with that option
than without it. I have chosen not to do that here, for that reason
and because it appears that no major OS distributions are using the
"packrat" option, so that doing so would cause Postgres' behavior
to diverge significantly depending on whether it was built with
--with-system-tzdata. However, for anyone for whom these changes pose
significant problems, there is a solution: build a set of timezone
files with the "packrat" option and use those with Postgres.
Contrary to what is documented in src/backend/access/transam/README,
ginHeapTupleFastInsert() had a few ordering issues with the way it does
its WAL operations when inserting items in its fast path.
First, when using a separate list, XLogBeginInsert() was being always
called before START_CRIT_SECTION(), and in this case a second thing was
wrong when merging lists, as an exclusive lock was taken on the tail
page *before* calling XLogBeginInsert(). Finally, when inserting items
into a tail page, the order of XLogBeginInsert() and
START_CRIT_SECTION() was reversed. This commit addresses all these
issues by moving the calls of XLogBeginInsert() after all the pages
logged are locked and pinned, within a critical section.
This has been applied first only on HEAD as of 56b6625, but as per
discussion with Tom Lane and Álvaro Herrera, a backpatch is preferred to
keep all the branches consistent and to respect the transam's README
where we can.
Author: Matthias van de Meent, Zhang Mingli
Discussion: https://postgr.es/m/CAEze2WhL8uLMqynnnCu1LAPwxD5RKEo0nHV+eXGg_N6ELU88HQ@mail.gmail.com
Backpatch-through: 10
Specifically, when pg_basebackup is invoked with -Tx=y, don't error
out if x could plausibly be an absolute path either on Windows or on
non-Windows systems. We don't know whether the remote system is
running the same OS as the local system, so it's not appropriate to
assume that our local rule about absolute pathnames is the same as
the rule on the remote system.
Patch by me, reviewed by Tom Lane, Andrew Dunstan, and
Davinder Singh.
Discussion: http://postgr.es/m/CA+TgmoY+jC3YiskomvYKDPK3FbrmsDU7_8+wMHt02HOdJeRb0g@mail.gmail.com
This problem has been introduced by commit 272248a0c1 where we started
assigning the subtransactions to the top-level transaction when we mark
both the top-level transaction and its subtransactions as containing
catalog changes. After we assign subtransactions to the top-level
transaction, we were not allowed to execute any invalidations associated
with it when we decide to skip the transaction.
The reason to assign the subtransactions to the top-level transaction was
to avoid the assertion failure in AssertTXNLsnOrder() as they have the
same LSN when we sometimes start accumulating transaction changes for
partial transactions after the restart. Now that with commit 64ff0fe4e8,
we skip this assertion check until we reach the LSN at which we start
decoding the contents of the transaction, so, there is no reason for such
an assignment anymore.
The assignment change was introduced in 15 and prior versions but this bug
doesn't exist in branches prior to 14 since we don't add invalidation
messages to subtransactions. We decided to backpatch through 11 for
consistency but not for 10 since its final release is near.
Reported-by: Kuroda Hayato
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/TYAPR01MB58660803BCAA7849C8584AA4F57E9%40TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
DefineQueryRewrite() has long required that ON SELECT rules be named
"_RETURN". But we overlooked the converse case: we should forbid
non-ON-SELECT rules that are named "_RETURN". In particular this
prevents using CREATE OR REPLACE RULE to overwrite a view's _RETURN
rule with some other kind of rule, thereby breaking the view.
Per bug #17646 from Kui Liu. Back-patch to all supported branches.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
The executor will dump core if it's asked to execute a seqscan on
a relation having no table AM, such as a view. While that shouldn't
really happen, it's possible to get there via catalog corruption,
such as a missing ON SELECT rule. It seems worth installing a defense
against that. There are multiple plausible places for such a defense,
but I picked the planner's get_relation_info().
Per discussion of bug #17646 from Kui Liu. Back-patch to v12 where
the tableam APIs were introduced; in older versions you won't get a
SIGSEGV, so it seems less pressing.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
If the non-recursive term of a SEARCH BREADTH FIRST recursive
query has only constants in its target list, the planner will
fold the starting RowExpr added by rewrite into a simple Const
of type RECORD. The executor doesn't have any problem with
that --- but EXPLAIN VERBOSE will encounter the Const as the
ultimate source of truth about what the field names of the
SET column are, and it didn't know what to do with that.
Fortunately, we can pull the identifying typmod out of the
Const, in much the same way that record_out would.
For reasons that remain a bit obscure to me, this only fails
with SEARCH BREADTH FIRST, not SEARCH DEPTH FIRST or CYCLE.
But I added regression test cases for both of those options
too, just to make sure we don't break it in future.
Per bug #17644 from Matthijs van der Vleuten. Back-patch
to v14 where these constructs were added.
Discussion: https://postgr.es/m/17644-3bd1f3036d6d7a16@postgresql.org
In the latest version of Apple's macOS SDK, <sys/socket.h>
fails to compile if "REF" is #define'd as something.
Apple may or may not agree that this is a bug, and even if
they do accept the bug report I filed, they probably won't
fix it very quickly. In the meantime, our back branches will all
fail to compile gram.y. v15 and HEAD currently escape the problem
thanks to the refactoring done in 98e93a1fc, but that's purely
accidental. Moreover, since that patch removed a widely-visible
inclusion of <netdb.h>, back-patching it seems too likely to break
third-party code.
Instead, change the token's code name to REF_P, following our usual
convention for naming parser tokens that are likely to have symbol
conflicts. The effects of that should be localized to the grammar
and immediately surrounding files, so it seems like a safer answer.
Per project policy that we want to keep recently-out-of-support
branches buildable on modern systems, back-patch all the way to 9.2.
Discussion: https://postgr.es/m/1803927.1665938411@sss.pgh.pa.us
snprintf.c has always fallen back on libc's *printf implementation
when printing pointers (%p) and floats. When this code originated,
we were still supporting some platforms that lacked native snprintf,
so we used sprintf for that. That's not actually unsafe in our usage,
but nonetheless builds on macOS are starting to complain about sprintf
being unconditionally deprecated; and I wouldn't be surprised if other
platforms follow suit. There seems little reason to believe that any
platform supporting C99 wouldn't have standards-compliant snprintf,
so let's just use that instead to suppress such warnings.
Back-patch to v12, which is where we started to require C99. It's
also where we started to use our snprintf.c everywhere, so this
wouldn't be enough to suppress the warning in older branches anyway
--- that is, in older branches these aren't necessarily all our
usages of libc's sprintf. It is enough in v12+ because any
deprecation annotation attached to libc's sprintf won't apply to
pg_sprintf. (Whether all our usages of pg_sprintf are adequately
safe is not a matter I intend to address here, but perhaps it could
do with some review.)
Per report from Andres Freund and local testing.
Discussion: https://postgr.es/m/20221015211955.q4cwbsfkyk3c4ty3@awork3.anarazel.de
When a query whose results were requested in single-row mode is the last
in the queue by the time those results are being read, the single-row
flag was not being reset, because we were returning early from
pqPipelineProcessQueue. Move that stanza up so that the flag is always
reset at the end of sending that query's results.
Add a test for the situation.
Backpatch to 14.
Author: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/01af18c5-dacc-a8c8-07ee-aecc7650c3e8@dalibo.com
The postmaster is not supposed to do anything that depends
fundamentally on shared memory contents, because that creates
the risk that a backend crash that trashes shared memory will
take the postmaster down with it, preventing automatic recovery.
In commit 969d7cd43 I lost sight of this principle and coded
AssignPostmasterChildSlot() in such a way that it could fail
or even crash if the shared PMSignalState structure became
corrupted. Remarkably, we've not seen field reports of such
crashes; but I managed to induce one while testing the recent
changes around palloc chunk headers.
To fix, make a semi-duplicative state array inside the postmaster
so that we need consult only local state while choosing a "child
slot" for a new backend. Ensure that other postmaster-executed
routines in pmsignal.c don't have critical dependencies on the
shared state, either. Corruption of PMSignalState might now
lead ReleasePostmasterChildSlot() to conclude that backend X
failed, when actually backend Y was the one that trashed things.
But that doesn't matter, because we'll force a cluster-wide reset
regardless.
Back-patch to all supported branches, since this is an old bug.
Discussion: https://postgr.es/m/3436789.1665187055@sss.pgh.pa.us
DEFAULT markers appearing in an INSERT on an updatable view
could be mis-processed if they were in a multi-row VALUES clause.
This would lead to strange errors such as "cache lookup failed
for type NNNN", or in older branches even to crashes.
The cause is that commit 41531e42d tried to re-use rewriteValuesRTE()
to remove any SetToDefault nodes (that hadn't previously been replaced
by the view's own default values) appearing in "product" queries,
that is DO ALSO queries. That's fundamentally wrong because the
DO ALSO queries might not even be INSERTs; and even if they are,
their targetlists don't necessarily match the view's column list,
so that almost all the logic in rewriteValuesRTE() is inapplicable.
What we want is a narrow focus on replacing any such nodes with NULL
constants. (That is, in this context we are interpreting the defaults
as being strictly those of the view itself; and we already replaced
any that aren't NULL.) We could add still more !force_nulls tests
to further lobotomize rewriteValuesRTE(); but it seems cleaner to
split out this case to a new function, restoring rewriteValuesRTE()
to the charter it had before.
Per bug #17633 from jiye_sw. Patch by me, but thanks to
Richard Guo and Japin Li for initial investigation.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/17633-98cc85e1fa91e905@postgresql.org
PostgreSQL::Test::Cluster and ::Utils were not being installed. This is
very hard to notice, as it only seems to affect external modules that
want to run tests from 15 back in earlier versions. Oversight in
b235d41d96.
This applies only to branches 14 and back, because 15 had already been
made correct in commit b3b4d8e68a.
Discussion: https://postgr.es/m/20221010093415.poplkyn7pjeiv2y7@alvherre.pgsql
There are a number of bugs in this area. Two of them are fixed here,
namely:
1. get_relation_idx_constraint_oid does not restrict the type of
constraint that's returned, so with sufficient bad luck it can
return the OID of a foreign key constraint. This has the effect that
a primary key in a partition can end up as a child of a foreign key,
which makes no sense (it needs to be the child of the equivalent
primary key.)
Change the API contract so that only index-backed constraints are
returned, mimicking get_constraint_index().
2. Both CloneFkReferenced and CloneFkReferencing clone a
self-referencing foreign key, so the partition ends up with
a duplicate foreign key. Change the former function to ignore such
constraints.
Add some tests to verify that things are better now. (However, these
new tests show some additional misbehavior that will be fixed later --
namely that there's a constraint marked NOT VALID.)
Backpatch to 12, where these constraints are possible at all.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220603154232.1715b14c@karst
Commit 34f581c39 intended to ensure that RelationGetBufferForTuple
would acquire a visibility-map page pin in case the otherBuffer's
all-visible bit had become set since we last had lock on that page.
But I missed a case: when we're extending the relation, VM concerns
were dealt with only in the relatively-less-likely case that we
fail to conditionally lock the otherBuffer. I think I'd believed
that we couldn't need to worry about it if the conditional lock
succeeds, which is true for the target buffer; but the otherBuffer
was unlocked for awhile so its bit might be set anyway. So we need
to do the GetVisibilityMapPins dance, and then also recheck the
page's free space, in both cases.
Per report from Jaime Casanova. Back-patch to v12 as the previous
patch was (although there's still no evidence that the bug is
reachable pre-v14).
Discussion: https://postgr.es/m/E1lWLjP-00006Y-Ml@gemulon.postgresql.org
This prevents marking the argument string for translation for gettext,
and it also prevents the given string (which is already translated) from
being translated at runtime.
Also, mark the strings used as arguments to check_rolespec_name for
translation.
Backpatch all the way back as appropriate. None of this is caught by
any tests (necessarily so), so I verified it manually.
Commit 25936fd46 adjusted things so that the "storeslot" we use
for remapping trigger tuples would have adequate lifespan, but it
neglected to consider the lifespan of the tuple descriptor that
the slot depends on. It turns out that in at least some cases, the
tupdesc we are passing is a refcounted tupdesc, and the refcount for
the slot's reference can get assigned to a resource owner having
different lifespan than the slot does. That leads to an error like
"tupdesc reference 0x7fdef236a1b8 is not owned by resource owner
SubTransaction". Worse, because of a second oversight in the same
commit, we'd try to free the same tupdesc refcount again while
cleaning up after that error, leading to recursive errors and an
"ERRORDATA_STACK_SIZE exceeded" PANIC.
To fix the initial problem, let's just make a non-refcounted copy
of the tupdesc we're supposed to use. That seems likely to guard
against additional problems, since there's no strong reason for
this code to assume that what it's given is a refcounted tupdesc;
in which case there's an independent hazard of the tupdesc having
shorter lifespan than the slot does. (I didn't bother trying to
free said copy, since it should go away anyway when the (sub)
transaction context is cleaned up.)
The other issue can be fixed by making the code added to
AfterTriggerFreeQuery work like the rest of that function, ie be
sure that it doesn't try to free the same slot twice in the event
of recursive error cleanup.
While here, also clean up minor stylistic issues in the test case
added by 25936fd46: don't use "create or replace function", as any
name collision within the tests is likely to have ill effects
that that won't mask; and don't use function names as generic as
trigger_function1, especially if you're not going to drop them
at the end of the test stanza.
Per bug #17607 from Thomas Mc Kay. Back-patch to v12, as the
previous fix was.
Discussion: https://postgr.es/m/17607-bd8ccc81226f7f80@postgresql.org
The "emulation" I wrote for PQsendQuery in pipeline mode to use extended
query protocol, in commit acb7e4eb6b, is problematic. Due to numerous
bugs we'll soon remove it. As a first step and for all branches back to
14, stop using PQsendQuery in libpq_pipeline. Also remove a few test
lines that will no longer be relevant.
Backpatch to 14.
Discussion: https://postgr.es/m/CA+mi_8ZGSQNmW6-mk_iSR4JZB_LJ4ww3suOF+1vGNs3MrLsv4g@mail.gmail.com
Mop up assorted set-but-not-used warnings in the back branches.
This includes back-patching relevant fixes from commit 152c9f7b8
the rest of the way, but there are also several cases that did not
appear in HEAD. Some of those we'd fixed in a retail way but not
back-patched, and others I think just got rewritten out of existence
during nearby refactoring.
While here, also back-patch b1980f6d0 (PL/Tcl: Fix compiler warnings
with Tcl 8.6) into 9.2, so that that branch compiles warning-free
with modern Tcl.
Per project policy, this is a candidate for back-patching into
out-of-support branches: it suppresses annoying compiler warnings
but changes no behavior. Hence, back-patch all the way to 9.2.
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
clang 15+ will issue a set-but-not-used warning when the only
use of a variable is in autoincrements (e.g., "foo++;").
That's perfectly sensible, but it detects a few more cases that
we'd not noticed before. Silence the warnings with our usual
methods, such as PG_USED_FOR_ASSERTS_ONLY, or in one case by
actually removing a useless variable.
One thing that we can't nicely get rid of is that with %pure-parser,
Bison emits "yynerrs" as a local variable that falls foul of this
warning. To silence those, I inserted "(void) yynerrs;" in the
top-level productions of affected grammars.
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
annoying compiler warnings but changes no behavior. Hence,
back-patch to 9.5, which is as far as these patches go without
issues. (A preliminary check shows that the prior branches
need some other set-but-not-used cleanups too, so I'll leave
them for another day.)
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
The API contract for planstate_tree_walker() callbacks is that they
take a PlanState pointer and a context pointer. Somebody figured
they could save a couple lines of code by ignoring that, and passing
ExecShutdownNode itself as the walker even though it has but one
argument. Somewhat remarkably, we've gotten away with that so far.
However, it seems clear that the upcoming C2x standard means to
forbid such cases, and compilers that actively break such code
likely won't be far behind. So spend the extra few lines of code
to do it honestly with a separate walker function.
In HEAD, we might as well go further and remove ExecShutdownNode's
useless return value. I left that as-is in back branches though,
to forestall complaints about ABI breakage.
Back-patch, with the thought that this might become of practical
importance before our stable branches are all out of service.
It doesn't seem to be fixing any live bug on any currently known
platform, however.
Discussion: https://postgr.es/m/208054.1663534665@sss.pgh.pa.us
The function has a bool argument named "case_insensitive", but that was
spelled "case_sensitive" in the declaration. Make them consistent now
to avoid confusion in the future.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Backpatch: 10-
Treat arguments declared as RECORD as if that were a polymorphic type
(which it is, sort of), in that we substitute the actual argument type
while forming the function cache lookup key. This allows the specific
composite type to be known in some cases where it was not before,
at the cost of making a separate function cache entry for each named
composite type that's passed to the function during a session. The
particular symptom discussed in bug #17610 could be solved in other
more-efficient ways, but only at the cost of considerable development
work, and there are other cases where we'd still fail without this.
Per bug #17610 from Martin Jurča. Back-patch to v11 where we first
allowed plpgsql functions to be declared as taking type RECORD.
Discussion: https://postgr.es/m/17610-fb1eef75bf6c2364@postgresql.org
I happened to notice that libpq_pipeline's private implementation
of pg_fatal lacked any pg_attribute_printf decoration. Indeed,
adding that turned up a mistake! We'd likely never have noticed
because the error exits in this code are unlikely to get hit,
but still, it's a bug.
We're so used to having the compiler check this stuff for us that
a printf-like function without pg_attribute_printf is a land mine.
I wonder if there is a way to detect such omissions.
Back-patch to v14 where this code came in.
The zlib documentation mentions the values supported for the compression
strategy, but this code has been using a hardcoded value of 0 rather
than Z_DEFAULT_STRATEGY. This commit adjusts the code to use
Z_DEFAULT_STRATEGY.
Backpatch down to where this code has been added to ease the backport of
any future patch touching this area.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 10
This adds additional variants of palloc, pg_malloc, etc. that
encapsulate common usage patterns and provide more type safety.
Specifically, this adds palloc_object(), palloc_array(), and
repalloc_array(), which take the type name of the object to be
allocated as its first argument and cast the return as a pointer to
that type. There are also palloc0_object() and palloc0_array()
variants for initializing with zero, and pg_malloc_*() variants of all
of the above.
Inspired by the talloc library.
This is backpatched from master so that future backpatchable code can
make use of these APIs. This patch by itself does not contain any
users of these APIs.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/bb755632-2a43-d523-36f8-a1e7a389a907@enterprisedb.com
The primary fix here is to fix has_matching_range() so it does not
reference ranges->values[-1] when nranges == 0. Similar problems existed
in AssertCheckRanges() too. It does not look like any of these problems
could lead to a crash as the array in question is at the end of the Ranges
struct, and values[-1] is memory that belongs to other fields in the
struct. However, let's get rid of these rather unsafe coding practices.
In passing, I (David) adjusted some comments to try to make it more clear
what some of the fields are for in the Ranges struct. I had to study the
code to find out what nsorted was for as I couldn't tell from the
comments.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqJQzPitufX-jR=YUbJafpCDAKUnwgdbX_MzSc93wuvdw@mail.gmail.com
Backpatch-through: 14, where multi-range brin was added.
Commit c4c340088 changed geometric operators to use float4 and float8
functions, and handle NaN's in a better way. The circle sameness test
had a typo in the code which resulted in all comparisons with the left
circle having a NaN radius considered same.
postgres=# select '<(0,0),NaN>'::circle ~= '<(0,0),1>'::circle;
?column?
----------
t
(1 row)
This fixes the sameness test to consider the radius of both the left
and right circle.
Backpatch to v12 where this was introduced.
Author: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/CAEudQAo8dK=yctg2ZzjJuzV4zgOPBxRU5+Kb+yatFiddtQk6Rw@mail.gmail.com
Backpatch-through: v12
The ECPG preprocessor converted code such as
static varchar str1[10], str2[20], str3[30];
into
static struct varchar_1 { int len; char arr[ 10 ]; } str1 ;
struct varchar_2 { int len; char arr[ 20 ]; } str2 ;
struct varchar_3 { int len; char arr[ 30 ]; } str3 ;
thus losing the storage attribute for the later variables.
Repeat the declaration for each such variable.
(Note that this occurred only for variables declared "varchar"
or "bytea", which may help explain how it escaped detection
for so long.)
Andrey Sokolov
Discussion: https://postgr.es/m/942241662288242@mail.yandex.ru
During ALTER TABLE ATTACH PARTITION, if the name of a parent's foreign
key constraint is already used on the partition, the code tries to
choose another one before the FK attributes list has been populated,
so the resulting constraint name was "<relname>__fkey" instead of
"<relname>_<attrs>_fkey". Repair, and add a test case.
Backpatch to 12. In 11, the code to attach a partition was not smart
enough to cope with conflicting constraint names, so the problem doesn't
exist there.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220901184156.738ebee5@karst
Primarily, this fixes an incorrect calculation in SlabCheck which was
looking in the wrong byte for the sentinel check. The reason that we've
never noticed this before in the form of a failing sentinel check is
because the pre-check to this always fails because all current core users
of slab contexts have a chunk size which is already MAXALIGNed, therefore
there's never any space for the sentinel byte. It is possible that an
extension needs to use a slab context and if they do with a chunk size
that's not MAXALIGNed, then they'll likely get errors about overwritten
sentinel bytes.
Additionally, this patch changes various calculations which are being done
based on the sizeof(SlabBlock). Currently, sizeof(SlabBlock) is a
multiple of 8, therefore sizeof(SlabBlock) is the same as
MAXALIGN(sizeof(SlabBlock)), however, if we were to ever have to add any
fields to that struct as part of a bug fix, then SlabAlloc could end up
returning a non-MAXALIGNed pointer. To be safe, let's ensure we always
MAXALIGN sizeof(SlabBlock) before using it in any calculations.
This patch has already been applied to master in d5ee4db0e.
Diagnosed-by: Tomas Vondra, Tom Lane
Author: Tomas Vondra, David Rowley
Discussion: https://postgr.es/m/CAA4eK1%2B1JyW5TiL%3DyV-3Uq1CrfnTyn0Xrk5uArt31Z%3D8rgPhXQ%40mail.gmail.com
Backpatch-through: 10
get_database_list() failed to restore the caller's memory context,
instead leaving current context set to TopMemoryContext which is
how CommitTransactionCommand() leaves it. The callers both think
they are using short-lived contexts, for the express purpose of
not having to worry about cleaning up individual allocations.
The net effect therefore is that supposedly short-lived allocations
could accumulate indefinitely in the launcher's TopMemoryContext.
Although this has been broken for a long time, it seems we didn't
have any obvious memory leak here until v15's rearrangement of the
stats logic. I (tgl) am not entirely convinced that there's no
other leak at all, though, and we're surely at risk of adding one
in future back-patched fixes. So back-patch to all supported
branches, even though this may be only a latent bug in pre-v15.
Reid Thompson
Discussion: https://postgr.es/m/972a4e12b68b0f96db514777a150ceef7dcd2e0f.camel@crunchydata.com
If the input word exceeds 1000 bytes, don't pass it to the stemmer;
just return it as-is after case folding. Such an input is surely
not a word in any human language, so whatever the stemmer might
do to it would be pretty dubious in the first place. Adding this
restriction protects us against a known recursion-to-stack-overflow
problem in the Turkish stemmer, and it seems like good insurance
against any other safety or performance issues that may exist in
the Snowball stemmers. (I note, for example, that they contain no
CHECK_FOR_INTERRUPTS calls, so we really don't want them running
for a long time.) The threshold of 1000 bytes is arbitrary.
An alternative definition could have been to treat such words as
stopwords, but that seems like a bigger break from the old behavior.
Per report from Egor Chindyaskin and Alexander Lakhin.
Thanks to Olly Betts for the recommendation to fix it this way.
Discussion: https://postgr.es/m/1661334672.728714027@f473.i.mail.ru
The default of lazy symbol resolution means that when the postmaster
first reaches the select() call in ServerLoop, it'll need to resolve
the link to that libc entry point. NetBSD's dynamic loader takes
an internal lock while doing that, and if a signal interrupts the
operation then there is a risk of self-deadlock should the signal
handler do anything that requires that lock, as several of the
postmaster signal handlers do. The window for this is pretty narrow,
and timing considerations make it unlikely that a signal would arrive
right then anyway. But it's semi-repeatable on slow single-CPU
machines, and in principle the race could happen with any hardware.
The least messy solution to this is to force binding of dynamic
symbols at postmaster start, using the "-z now" linker option.
While we're at it, also use "-z relro" so as to provide a small
security gain.
It's not entirely clear whether any other platforms share this
issue, but for now we'll assume it's NetBSD-specific. (We might
later try to use "-z now" on more platforms for performance
reasons, but that would not likely be something to back-patch.)
Report and patch by me; the idea to fix it this way is from
Andres Freund.
Discussion: https://postgr.es/m/3384826.1661802235@sss.pgh.pa.us
When a PostgreSQL instance performing archive recovery but not using
standby mode is promoted, and the last WAL segment that it attempted
to read ended in a partial record, the previous code would create
invalid WAL on the new timeline. The WAL from the previously timeline
would be copied to the new timeline up until the end of the last valid
record, but instead of beginning to write WAL at immediately
afterwards, the promoted server would write an overwrite contrecord at
the beginning of the next segment. The end of the previous segment
would be left as all-zeroes, resulting in failures if anything tried
to read WAL from that file.
The root of the issue is that ReadRecord() decides whether to set
abortedRecPtr and missingContrecPtr based on the value of StandbyMode,
but ReadRecord() switches to a new timeline based on the value of
ArchiveRecoveryRequested. We shouldn't try to write an overwrite
contrecord if we're switching to a new timeline, so change the test in
ReadRecod() to check ArchiveRecoveryRequested instead.
Code fix by Dilip Kumar. Comments by me incorporating suggested
language from Álvaro Herrera. Further review from Kyotaro Horiguchi
and Sami Imseih.
Discussion: http://postgr.es/m/CAFiTN-t7umki=PK8dT1tcPV=mOUe2vNhHML6b3T7W7qqvvajjg@mail.gmail.com
Discussion: http://postgr.es/m/FB0DEA0B-E14E-43A0-811F-C1AE93D00FF3%40amazon.com
While waiting for slots to become available in wait_on_slots() in
parallel_slot.c, the cancellation always relied on the first connection
in the set to do the job. This could cause problems when this slot's
socket is gone as PQgetCancel() would return NULL in this case. Rather
than always using the first connection, this changes the logic to use
the first valid connection for the cancellation.
Author: Ranier Vilela
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAEudQAokk1h_pUwGXsYS4oVOuf35s1O2o3TXGHpV8=AWikvgHA@mail.gmail.com
Backpatch-through: 14
SplitToVariants() in the ispell code, lseg_inside_poly() in geo_ops.c,
and regex_selectivity_sub() in selectivity estimation could recurse
until stack overflow; fix by adding check_stack_depth() calls.
So could next() in the regex compiler, but that case is better fixed by
converting its tail recursion to a loop. (We probably get better code
that way too, since next() can now be inlined into its sole caller.)
There remains a reachable stack overrun in the Turkish stemmer, but
we'll need some advice from the Snowball people about how to fix that.
Per report from Egor Chindyaskin and Alexander Lakhin. These mistakes
are old, so back-patch to all supported branches.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/1661334672.728714027@f473.i.mail.ru
sysctl is more portable than Linux's /proc/sys file tree, and
often easier to use too. That's why most of our docs refer to
sysctl when talking about how to adjust kernel parameters.
Bring the few stragglers into line.
Discussion: https://postgr.es/m/361175.1661187463@sss.pgh.pa.us
When creating a partitioned index, DefineIndex tries to identify
any existing indexes on the partitions that match the partitioned
index, so that it can absorb those as child indexes instead of
building new ones. Part of the matching is to compare IndexInfo
structs --- but that wasn't done quite right. We're comparing
the IndexInfo built within DefineIndex itself to one made from
existing catalog contents by BuildIndexInfo. Notably, while
BuildIndexInfo will run index expressions and predicates through
expression preprocessing, that has not happened to DefineIndex's
struct. The result is failure to match and subsequent creation
of duplicate indexes.
The easiest and most bulletproof fix is to build a new IndexInfo
using BuildIndexInfo, thereby guaranteeing that the processing done
is identical.
While here, let's also extract the opfamily and collation data
from the new partitioned index, removing ad-hoc logic that
duplicated knowledge about how those are constructed.
Per report from Christophe Pettus. Back-patch to v11 where
we invented partitioned indexes.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/8864BFAA-81FD-4BF9-8E06-7DEB8D4164ED@thebuild.com
The assert, introduced by 9f1cf97bb5, is intended to check if the prefix
is terminated by a \0 byte, but it has two flaws. Firstly, prefix_size
includes the \0 byte, so prefix[prefix_size] points to the byte after
the null byte. Secondly, the check ensures the byte is not equal \0,
while it should be checking the opposite.
Backpatch-through: 14
Discussion: https://postgr.es/m/b99b6101-2f14-3796-3dfa-4a6cd7d4326d@enterprisedb.com
The current publisher code checks if UPDATE or DELETE can be executed with
the replica identity of the table even if it's a partitioned table. We can
skip checking the replica identity for partitioned tables because the
operations are actually performed on the leaf partitions (not the
partitioned table).
Reported-by: Brad Nicholson
Author: Hou Zhijie
Reviewed-by: Peter Smith, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAMMnM%3D8i5DohH%3DYKzV0_wYuYSYvuOJoL9F5nzXTc%2ByzsG1f6rg%40mail.gmail.com
There's a convention that externally-visible libpq functions should
check for a NULL PGconn pointer, and fail gracefully instead of
crashing. PQflush() and PQisnonblocking() didn't get that memo
though. Also add a similar check to PQdefaultSSLKeyPassHook_OpenSSL;
while it's not clear that ordinary usage could reach that with a
null conn pointer, it's cheap enough to check, so let's be consistent.
Daniele Varrazzo and Tom Lane
Discussion: https://postgr.es/m/CA+mi_8Zm_mVVyW1iNFgyMd9Oh0Nv8-F+7Y3-BqwMgTMHuo_h2Q@mail.gmail.com
When enlarging the work buffers of a VarStringSortSupport object,
varstrfastcmp_locale was careful to keep them in the ssup_cxt
memory context; but varstr_abbrev_convert just used palloc().
The latter creates a hazard that the buffers could be freed out
from under the VarStringSortSupport object, resulting in stomping
on whatever gets allocated in that memory later.
In practice, because we only use this code for ICU collations
(cf. 3df9c374e), the problem is confined to use of ICU collations.
I believe it may have been unreachable before the introduction
of incremental sort, too, as traditional sorting usually just
uses one context for the duration of the sort.
We could fix this by making the broken stanzas in varstr_abbrev_convert
match the non-broken ones in varstrfastcmp_locale. However, it seems
like a better idea to dodge the issue altogether by replacing the
pfree-and-allocate-anew coding with repalloc, which automatically
preserves the chunk's memory context. This fix does add a few cycles
because repalloc will copy the chunk's content, which the existing
coding assumes is useless. However, we don't expect that these buffer
enlargement operations are performance-critical. Besides that, it's
far from obvious that copying the buffer contents isn't required, since
these stanzas make no effort to mark the buffers invalid by resetting
last_returned, cache_blob, etc. That seems to be safe upon examination,
but it's fragile and could easily get broken in future, which wouldn't
get revealed in testing with short-to-moderate-size strings.
Per bug #17584 from James Inform. Whether or not the issue is
reachable in the older branches, this code has been broken on its
own terms from its introduction, so patch all the way back.
Discussion: https://postgr.es/m/17584-95c79b4a7d771f44@postgresql.org
It's possible to reach this case when work_mem is very small and tupsize
is (relatively) very large. In that case ExecChooseHashTableSize would
get an assertion failure, or with asserts off it'd compute nbuckets = 0,
which'd likely cause misbehavior later (I've not checked). To fix,
clamp the number of buckets to be at least 1.
This is due to faulty conversion of old my_log2() coding in 28d936031.
Back-patch to v13, as that was.
Zhang Mingli
Discussion: https://postgr.es/m/beb64ca0-91e2-44ac-bf4a-7ea36275ec02@Spark
Most parts of the parser can expect that the stack overflow check
in transformExprRecurse() will trigger before things get desperate.
However, transformFromClauseItem() can recurse directly to self
without having analyzed any expressions, so it's possible to drive
it to a stack-overrun crash. Add a check to prevent that.
Per bug #17583 from Egor Chindyaskin. Back-patch to all supported
branches.
Richard Guo
Discussion: https://postgr.es/m/17583-33be55b9f981f75c@postgresql.org
As of 897795240c, check constraints can
be declared invalid. But that patch didn't update _outConstraint() to
also show the relevant struct fields (which were only applicable to
foreign keys before that). This currently only affects debugging
output, so no impact in practice.
96ef3b8ff1 accidentally copied a not
applicable comment from the float8_pass_by_value code to the
data_checksums code. Remove that.
87d3b35a1c changed pg_upgrade to
checking the checksum version rather than just the Boolean presence of
checksums, but didn't change the field type in its ControlData struct
from bool. So this would not work correctly if there ever is a
checksum version larger than 1.
The set of fields printed by _outConstraint() in the CONSTR_IDENTITY
case didn't match the set of fields actually used in that case. (The
code was probably uncarefully copied from the CONSTR_DEFAULT case.)
Fix that by using the right set of fields. Since there is no read
support for this node type, this is really just for debugging output
right now, so it doesn't affect anything important.
Previously, we relied on HEAP2_NEW_CID records and XACT_INVALIDATION
records to know if the transaction has modified the catalog, and that
information is not serialized to snapshot. Therefore, after the restart,
if the logical decoding decodes only the commit record of the transaction
that has actually modified a catalog, we will miss adding its XID to the
snapshot. Thus, we will end up looking at catalogs with the wrong
snapshot.
To fix this problem, this changes the snapshot builder so that it
remembers the last-running-xacts list of the decoded RUNNING_XACTS record
after restoring the previously serialized snapshot. Then, we mark the
transaction as containing catalog changes if it's in the list of initial
running transactions and its commit record has XACT_XINFO_HAS_INVALS. To
avoid ABI breakage, we store the array of the initial running transactions
in the static variables InitialRunningXacts and NInitialRunningXacts,
instead of storing those in SnapBuild or ReorderBuffer.
This approach has a false positive; we could end up adding the transaction
that didn't change catalog to the snapshot since we cannot distinguish
whether the transaction has catalog changes only by checking the COMMIT
record. It doesn't have the information on which (sub) transaction has
catalog changes, and XACT_XINFO_HAS_INVALS doesn't necessarily indicate
that the transaction has catalog change. But that won't be a problem since
we use snapshot built during decoding only to read system catalogs.
On the master branch, we took a more future-proof approach by writing
catalog modifying transactions to the serialized snapshot which avoids the
above false positive. But we cannot backpatch it because of a change in
the SnapBuild.
Reported-by: Mike Oh
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Shi yu, Takamichi Osumi, Kyotaro Horiguchi, Bertrand Drouvot, Ahsan Hadi
Backpatch-through: 10
Discussion: https://postgr.es/m/81D0D8B0-E7C4-4999-B616-1E5004DBDCD2%40amazon.com
fmgr_sql must make expanded-datum arguments read-only, because
it's possible that the function body will pass the argument to
more than one callee function. If one of those functions takes
the datum's R/W property as license to scribble on it, then later
callees will see an unexpected value, leading to wrong answers.
From a performance standpoint, it'd be nice to skip this in the
common case that the argument value is passed to only one callee.
However, detecting that seems fairly hard, and certainly not
something that I care to attempt in a back-patched bug fix.
Per report from Adam Mackler. This has been broken since we
invented expanded datums, so back-patch to all supported branches.
Discussion: https://postgr.es/m/WScDU5qfoZ7PB2gXwNqwGGgDPmWzz08VdydcPFLhOwUKZcdWbblbo-0Lku-qhuEiZoXJ82jpiQU4hOjOcrevYEDeoAvz6nR0IU4IHhXnaCA=@mackler.email
Discussion: https://postgr.es/m/187436.1660143060@sss.pgh.pa.us
Per buildfarm, the output order of \dx+ isn't consistent across
locales. Apply NO_LOCALE to force C locale. There might be a
more localized way, but I'm not seeing it offhand, and anyway
there is nothing in this test module that particularly cares
about locales.
Security: CVE-2022-2625
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
Commit 59be1c942a already tried to make
src/test/recovery/t/033_replay_tsp_drops more reliable, but it wasn't
enough. Try to improve on that by making this use of a replication slot
to be more like others. Also, don't drop the slot.
Make a few other stylistic changes while at it. It's still quite slow,
which is another thing that we need to fix in this script.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/349302.1659191875@sss.pgh.pa.us
On closer inspection, mcv.c isn't as broken for ScalarArrayOpExpr
as I thought. The Var-on-right issue is real enough, but actually
it does cope fine with a NULL array constant --- I was misled by
an XXX comment suggesting it didn't. Undo that part of the code
change, and replace the XXX comment with something less misleading.
Since v14, the extended stats machinery will try to estimate for
otherwise-unsupported boolean expressions if they match an expression
available from an extended stats object. mcv.c did not get the memo
about this, and would spit up with "unknown clause type". Fortunately
the case is easy to handle, since we can expect the expression yields
boolean.
While here, replace some not-terribly-on-point assertions with
simpler runtime tests for lookup failure. That seems appropriate
so that we get an elog not a crash if we somehow get to the new
it-should-be-a-bool-expression code with a subexpression that
doesn't match any stats column.
Per report from Danny Shemesh. Thanks to Justin Pryzby for
preliminary investigation.
Discussion: https://postgr.es/m/CAFZC=QqD6=27wQPOW1pbRa98KPyuyn+7cL_Ay_Ck-roZV84vHg@mail.gmail.com
statext_is_compatible_clause_internal() checked that the arguments
of a ScalarArrayOpExpr are one Var and one Const, but it would allow
cases where the Const was on the left. Subsequent uses of the clause
are not expecting that and would suffer assertion failures or core
dumps. mcv.c also had not bothered to cope with the case of a NULL
array constant, which seems really unacceptably sloppy of somebody.
(Although our tools failed us there too, since AFAIK neither Coverity
nor any compiler warned of the obvious use-of-uninitialized-variable
condition.) It seems best to handle that by having
statext_is_compatible_clause_internal() reject it.
Noted while fixing bug #17570. Back-patch to v13 where the
extended stats code grew some awareness of ScalarArrayOpExpr.
Commit a4d75c86b improved the extended-stats logic to allow extended
stats to be collected on expressions not just bare Vars. To apply
such stats, we first verify that the user has permissions to read all
columns used in the stats. (If not, the query will likely fail at
runtime, but the planner ought not do so.) That had to get extended
to check permissions of columns appearing within such expressions,
but the code for that was completely wrong: it applied pull_varattnos
to the wrong pointer, leading to "unrecognized node type" failures.
Furthermore, although you couldn't get to this because of that bug,
it failed to account for the attnum offset applied by pull_varattnos.
This escaped recognition so far because the code in question is not
reached when the user has whole-table SELECT privilege (which is the
common case), and because only subexpressions not specially handled
by statext_is_compatible_clause_internal() are at risk.
I think a large part of the reason for this bug is under-documentation
of what statext_is_compatible_clause() is doing and what its arguments
are, so do some work on the comments to try to improve that.
Per bug #17570 from Alexander Kozhemyakin. Patch by Richard Guo;
comments and other cosmetic improvements by me. (Thanks also to
Japin Li for diagnosis.) Back-patch to v14 where the bug came in.
Discussion: https://postgr.es/m/17570-f2f2e0f4bccf0965@postgresql.org
Having additional triggers in a test table made the ORDER BY clauses in
old queries underspecified. Add another column there for stability.
Per sporadic buildfarm pink.
Using ATSimpleRecursion() in ATPrepCmd() to do so as bbb927b4db did is
not correct, because ATPrepCmd() can't distinguish between triggers that
may be cloned and those that may not, so would wrongly try to recurse
for the latter category of triggers.
So this commit restores the code in EnableDisableTrigger() that
86f575948c had added to do the recursion, which would do it only for
triggers that may be cloned, that is, row-level triggers. This also
changes tablecmds.c such that ATExecCmd() is able to pass the value of
ONLY flag down to EnableDisableTrigger() using its new 'recurse'
parameter.
This also fixes what seems like an oversight of 86f575948c that the
recursion to partition triggers would only occur if EnableDisableTrigger()
had actually changed the trigger. It is more apt to recurse to inspect
partition triggers even if the parent's trigger didn't need to be
changed: only then can we be certain that all descendants share the same
state afterwards.
Backpatch all the way back to 11, like bbb927b4db. Care is taken not
to break ABI compatibility (and that no catversion bump is needed.)
Co-authored-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Discussion: https://postgr.es/m/CA+HiwqG-cZT3XzGAnEgZQLoQbyfJApVwOTQaCaas1mhpf+4V5A@mail.gmail.com
Ordinarily the functions called in this loop ought to have plenty
of CFIs themselves; but we've now seen a case where no such CFI is
reached, making the loop uninterruptible. Even though that's from
a recently-introduced bug, it seems prudent to install a CFI at
the loop level in all branches.
Per discussion of bug #17558 from Andrew Kesper (an actual fix for
that bug will follow).
Discussion: https://postgr.es/m/17558-3f6599ffcf52fd4a@postgresql.org
Remove the test case added by commit fac1b470a, which never actually
worked to expose the problem it claimed to test. Replace it with
a case that does expose the problem, and also covers the SRF-not-
at-the-top deficiency repaired in 1aa8dad41.
Richard Guo, with some editorialization by me
Discussion: https://postgr.es/m/17564-c7472c2f90ef2da3@postgresql.org
Commit fac1b470a thought we could check for set-returning functions
by testing only the top-level node in an expression tree. This is
wrong in itself, and to make matters worse it encouraged others
to make the same mistake, by exporting tlist.c's special-purpose
IS_SRF_CALL() as a widely-visible macro. I can't find any evidence
that anyone's taken the bait, but it was only a matter of time.
Use expression_returns_set() instead, and stuff the IS_SRF_CALL()
genie back in its bottle, this time with a warning label. I also
added a couple of cross-reference comments.
After a fair amount of fooling around, I've despaired of making
a robust test case that exposes the bug reliably, so no test case
here. (Note that the test case added by fac1b470a is itself
broken, in that it doesn't notice if you remove the code change.
The repro given by the bug submitter currently doesn't fail either
in v15 or HEAD, though I suspect that may indicate an unrelated bug.)
Per bug #17564 from Martijn van Oosterhout. Back-patch to v13,
as the faulty patch was.
Discussion: https://postgr.es/m/17564-c7472c2f90ef2da3@postgresql.org
The sto_using_cursor and sto_using_select tests were coded to exercise
every permutation of their test steps, but AFAICS there is no value in
exercising more than one. This matters because each permutation costs
about six seconds, thanks to the "pg_sleep(6)". Perhaps we could
reduce that, but the useless permutations seem worth getting rid of
in any case. (Note that sto_using_hash_index got it right already.)
While here, clean up some other sloppiness such as an unused table.
This doesn't make too much difference in interactive testing, since the
wasted time is typically masked by parallelization with other tests.
However, the buildfarm runs this as a serial step, which means we can
expect to shave ~40 seconds from every buildfarm run. That makes it
worth back-patching.
Discussion: https://postgr.es/m/2515192.1659454702@sss.pgh.pa.us
I thought commit fd96d14d9 had plugged all the holes of this sort,
but no, function RTEs could produce oversize tuples too, either
via long coldeflists or just from multiple functions in one RTE.
(I'm pretty sure the other variants of base RTEs aren't a problem,
because they ultimately refer to either a table or a sub-SELECT,
whose widths are enforced elsewhere. But we explicitly allow join
RTEs to be overwidth, as long as you don't try to form their
tuple result.)
Per further discussion of bug #17561. As before, patch all branches.
Discussion: https://postgr.es/m/17561-80350151b9ad2ad4@postgresql.org
errno was not reported correctly after attempting to clone a file,
leading to incorrect error reports. While scanning through the code, I
have not noticed any similar mistakes.
Error introduced in 3a769d8.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220731134135.GY15006@telsasoft.com
Backpatch-through: 12
The code tried to access ARR_DIMS(v)[0] and ARR_LBOUND(v)[0]
whether or not those values exist. This made the range check
on the "n" argument unstable --- it might or might not fail, and
if it did it would report garbage for the allowed upper limit.
These bogus accesses would probably annoy Valgrind, and if you
were very unlucky even lead to SIGSEGV.
Report and fix by Martin Kalcher. Back-patch to v14 where this
function was added.
Discussion: https://postgr.es/m/baaeb413-b8a8-4656-5757-ef347e5ec11f@aboutsource.net
Tom Lane
Peter Eisentraut
Thomas Munro
Alexander Korotkov
Amit Kapila
Dean Rasheed
Michael Paquier
Andres Freund
Tomas Vondra
David Rowley
Etsuro Fujita
Jeff Davis
Andrew Dunstan
Alvaro Herrera
Noah Misch
Robert Haas
Peter Geoghegan
Daniel Gustafsson