The new test is from commit 9e4f914b5e.
With this setting messages have SQL error numbers included, so that
needs to be provided for in the pattern looked for.
Backpatch to all live branches like the original.
A RowExpr with more than MaxTupleAttributeNumber columns would fail at
execution anyway, since we cannot form a tuple datum with more than that
many columns. While heap_form_tuple() has a check for too many columns,
it emerges that there are some intermediate bits of code that don't
check and can be driven to failure with sufficiently many columns.
Checking this at parse time seems like the most appropriate place to
install a defense, since we already check SELECT list length there.
While at it, make the SELECT-list-length error use the same errcode
(TOO_MANY_COLUMNS) as heap_form_tuple does, rather than the generic
PROGRAM_LIMIT_EXCEEDED.
Per bug #17561 from Egor Chindyaskin. The given test case crashes
in all supported branches (and probably a lot further back),
so patch all.
Discussion: https://postgr.es/m/17561-80350151b9ad2ad4@postgresql.org
On FreeBSD, the new test fails due to a WAL file being removed before
the standby has had the chance to copy it. Fix by adding a replication
slot to prevent the removal until after the standby has connected.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wj5nau_qpjbwihvmXLfkAWOZ5TKdbnqOc6nKSiRJEoPyQ@mail.gmail.com
Crash recovery on standby may encounter missing directories
when replaying database-creation WAL records. Prior to this
patch, the standby would fail to recover in such a case;
however, the directories could be legitimately missing.
Consider the following sequence of commands:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the
tablespace directory, the standby crashes and has to replay the
create database record again, crash recovery must be able to continue.
A fix for this problem was already attempted in 49d9cfc68b, but it
was reverted because of design issues. This new version is based
on Robert Haas' proposal: any missing tablespaces are created
during recovery before reaching consistency. Tablespaces
are created as real directories, and should be deleted
by later replay. CheckRecoveryConsistency ensures
they have disappeared.
The problems detected by this new code are reported as PANIC,
except when allow_in_place_tablespaces is set to ON, in which
case they are WARNING. Apart from making tests possible, this
gives users an escape hatch in case things don't go as planned.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Author: Paul Guo <paulguo@gmail.com>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com> (older versions)
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com> (older versions)
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
On Windows with MSVC, get_dirent_type() was recently made to return
DT_LNK for junction points by commit 9d3444dc, which fixed some
defective dirent.c code.
On Windows with Cygwin, get_dirent_type() already worked for symlinks,
as it does on POSIX systems, because Cygwin has its own fake symlinks
that behave like POSIX (on closer inspection, Cygwin's dirent has the
BSD d_type extension but it's probably always DT_UNKNOWN, so we fall
back to lstat(), which understands Cygwin symlinks with S_ISLNK()).
On Windows with MinGW/MSYS, we need extra code, because the MinGW
runtime has its own readdir() without d_type, and the lstat()-based
fallback has no knowledge of our convention for treating junctions as
symlinks.
Back-patch to 14, where get_dirent_type() landed.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/b9ddf605-6b36-f90d-7c30-7b3e95c46276%40dunslane.net
This is a backpatch to branches 10-14 of the following commits:
7170f2159f Allow "in place" tablespaces.
c6f2f01611 Fix pg_basebackup with in-place tablespaces.
f6f0db4d62 Fix pg_tablespace_location() with in-place tablespaces
7a7cd84893 doc: Remove mention to in-place tablespaces for pg_tablespace_location()
5344723755 Remove unnecessary Windows-specific basebackup code.
In-place tablespaces were introduced as a testing helper mechanism, but
they are going to be used for a bugfix in WAL replay to be backpatched
to all stable branches.
I (Álvaro) had to adjust some code to account for lack of
get_dirent_type() in branches prior to 14.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Michaël Paquier <michael@paquier.xyz>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20220722081858.omhn2in5zt3g4nek@alvherre.pgsql
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
It incorrectly used GetBufferDescriptor instead of
GetLocalBufferDescriptor, causing it to not find the correct buffer in
most cases, and performing an out-of-bounds memory read in the corner
case that temp_buffers > shared_buffers.
It also bumped the usage-count on the buffer, even if it was
previously pinned. That won't lead to crashes or incorrect results,
but it's different from what the shared-buffer case does, and
different from the usual code in LocalBufferAlloc. Fix that too, and
make the code ordering match LocalBufferAlloc() more closely, so that
it's easier to verify that it's doing the same thing.
Currently, ReadRecentBuffer() is only used with non-temp relations, in
WAL redo, so the broken code is currently dead code. However, it could
be used by extensions.
Backpatch-through: 14
Discussion: https://www.postgresql.org/message-id/2d74b46f-27c9-fb31-7f99-327a87184cc0%40iki.fi
Reviewed-by: Thomas Munro, Zhang Mingli, Richard Guo
Commit 87e6ed7c8 added code that intended to report Windows "junction
points" as DT_LNK (the same way we report symlinks on Unix). Windows
junction points are *also* directories according to the Windows
attributes API, and we were reporting them as as DT_DIR. Change the
order we check the attribute flags, to prioritize DT_LNK.
If at some point we start using Windows' recently added real symlinks
and need to distinguish them from junction points, we may need to
rethink this, but for now this continues the tradition of wrapper
functions that treat junction points as symlinks.
Back-patch to 14, where get_dirent_type() landed.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA%2BhUKGLzLK4PUPx0_AwXEWXOYAejU%3D7XpxnYE55Y%2Be7hB2N3FA%40mail.gmail.com
Discussion: https://postgr.es/m/20220721111751.x7hod2xgrd76xr5c%40alvherre.pgsql
Due to lack of concern for the case in the dependency code, it's
possible to drop a column of a composite type even though stored
queries have references to the dropped column via functions-in-FROM
that return the composite type. There are "soft" references,
namely FROM-clause aliases for such columns, and "hard" references,
that is actual Vars referring to them. The right fix for hard
references is to add dependencies preventing the drop; something
we've known for many years and not done (and this commit still doesn't
address it). A "soft" reference shouldn't prevent a drop though.
We've been around on this before (cf. 9b35ddce9, 2c4debbd0), but
nobody had noticed that the current behavior can result in dump/reload
failures, because ruleutils.c can print more column aliases than the
underlying composite type now has. So we need to rejigger the
column-alias-handling code to treat such columns as dropped and not
print aliases for them.
Rather than writing new code for this, I used expandRTE() which already
knows how to figure out which function result columns are dropped.
I'd initially thought maybe we could use expandRTE() in all cases, but
that fails for EXPLAIN's purposes, because the planner strips a lot of
RTE infrastructure that expandRTE() needs. So this patch just uses it
for unplanned function RTEs and otherwise does things the old way.
If there is a hard reference (Var), then removing the column alias
causes us to fail to print the Var, since there's no longer a name
to print. Failing seems less desirable than printing a made-up
name, so I made it print "?dropped?column?" instead.
Per report from Timo Stolz. Back-patch to all supported branches.
Discussion: https://postgr.es/m/5c91267e-3b6d-5795-189c-d15a55d61dbb@nullachtvierzehn.de
When a non-exclusive backup is canceled, do_pg_abort_backup() is called
and resets some variables set by pg_backup_start (pg_start_backup in v14
or before). But previously it forgot to reset the session state indicating
whether a non-exclusive backup is in progress or not in this session.
This issue could cause an assertion failure when the session running
BASE_BACKUP is terminated after it executed pg_backup_start and
pg_backup_stop (pg_stop_backup in v14 or before). Also it could cause
a segmentation fault when pg_backup_stop is called after BASE_BACKUP
in the same session is canceled.
This commit fixes the issue by making do_pg_abort_backup reset
that session state.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
Multiple non-exclusive backups are able to be run conrrently in different
sessions. But, in the same session, only one non-exclusive backup can be
run at the same moment. If pg_backup_start (pg_start_backup in v14 or before)
is called in the middle of another non-exclusive backup in the same session,
an error is thrown.
However, previously, in logical replication walsender mode, even if that
walsender session had already called pg_backup_start and started
a non-exclusive backup, it could execute BASE_BACKUP command and
start another non-exclusive backup. Which caused subsequent pg_backup_stop
to throw an error because BASE_BACKUP unexpectedly reset the session state
marked by pg_backup_start.
This commit prevents BASE_BACKUP command in the middle of another
non-exclusive backup in the same session.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
The patch that added regcollation doesn't seem to have been too
thorough about supporting it everywhere that other reg* types
are supported. Fix that. (The find_expr_references omission
is moderately serious, since it could result in missing expression
dependencies. The others are less exciting.)
Noted while fixing bug #17483. Back-patch to v13 where
regcollation was added.
Discussion: https://postgr.es/m/1423433.1652722406@sss.pgh.pa.us
Commit 4518c798 blocks signals for a short region of code, but it
assumed that whatever called it had the signal mask set to UnBlockSig on
entry. That may be true today (or may even not be, in extensions in the
wild), but it would be better not to make that assumption. We should
save-and-restore the caller's signal mask.
The PG_SETMASK() portability macro couldn't be used for that, which is
why it wasn't done before. But... considering that commit a65e0864
established back in 9.6 that supported POSIX systems have sigprocmask(),
and that this is POSIX-only code, there is no reason not to use standard
sigprocmask() directly to achieve that.
Back-patch to all supported releases, like 4518c798 and 80845b7c.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKx6Biq7_UuV0kn9DW%2B8QWcpJC1qwhizdtD9tN-fn0H0g%40mail.gmail.com
On Linux, we call posix_fallocate() on shm_open()'d memory to avoid
later potential SIGBUS (see commit 899bd785).
Based on field reports of systems stuck in an EINTR retry loop there,
there, we made it possible to break out of that loop via slightly odd
coding where the CHECK_FOR_INTERRUPTS() call was somewhat removed from
the loop (see commit 422952ee).
On further reflection, that was not a great choice for at least two
reasons:
1. If interrupts were held, the CHECK_FOR_INTERRUPTS() would do nothing
and the EINTR error would be surfaced to the user.
2. If EINTR was reported but neither QueryCancelPending nor
ProcDiePending was set, then we'd dutifully retry, but with a bit more
understanding of how posix_fallocate() works, it's now clear that you
can get into a loop that never terminates. posix_fallocate() is not a
function that can do some of the job and tell you about progress if it's
interrupted, it has to undo what it's done so far and report EINTR, and
if signals keep arriving faster than it can complete (cf recovery
conflict signals), you're stuck.
Therefore, for now, we'll simply block most signals to guarantee
progress. SIGQUIT is not blocked (see InitPostmasterChild()), because
its expected handler doesn't return, and unblockable signals like
SIGCONT are not expected to arrive at a high rate. For good measure,
we'll include the ftruncate() call in the blocked region, and add a
retry loop.
Back-patch to all supported releases.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Nicola Contu <nicola.contu@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220701154105.jjfutmngoedgiad3%40alvherre.pgsql
Commit 054325c5ee created a memory leak in PQsendQueryInternal in case
an error occurs while sending the message. Repair.
Backpatch to 14, like that commit. Reported by Coverity.
Justin Pryzby reported that some scenarios could cause gathering
of extended statistics to spend many seconds in an un-cancelable
qsort() operation. To fix, invent qsort_interruptible(), which is
just like qsort_arg() except that it will also do CHECK_FOR_INTERRUPTS
every so often. This bloats the backend by a couple of kB, which
seems like a good investment. (We considered just enabling
CHECK_FOR_INTERRUPTS in the existing qsort and qsort_arg functions,
but there are some callers for which that'd demonstrably be unsafe.
Opt-in seems like a better way.)
For now, just apply qsort_interruptible() in statistics collection.
There's probably more places where it could be useful, but we can
always change other call sites as we find problems.
Back-patch to v14. Before that we didn't have extended stats on
expressions, so that the problem was less severe. Also, this patch
depends on the sort_template infrastructure introduced in v14.
Tom Lane and Justin Pryzby
Discussion: https://postgr.es/m/20220509000108.GQ28830@telsasoft.com
dshash.c previously maintained flags to be able to assert that you
didn't hold any partition lock. These flags could get out of sync with
reality in error scenarios.
Get rid of all that, and make assertions about the locks themselves
instead. Since LWLockHeldByMe() loops internally, we don't want to put
that inside another loop over all partition locks. Introduce a new
debugging-only interface LWLockAnyHeldByMe() to avoid that.
This problem was noted by Tom and Andres while reviewing changes to
support the new shared memory stats system, and later showed up in
reality while working on commit 389869af.
Back-patch to 11, where dshash.c arrived.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220311012712.botrpsikaufzteyt@alap3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGJ31Wce6HJ7xnVTKWjFUWQZPBngxfJVx4q0E98pDr3kAw%40mail.gmail.com
When you hit ^C, the terminal driver in Unix-like systems echoes "^C" as
well as sending an interrupt signal (depending on stty settings). At
least libedit (but maybe also libreadline) is then confused about the
current cursor location, and corrupts the display if you try to scroll
back. Fix, by moving to a new line before the next prompt is displayed.
Back-patch to all supported released.
Author: Pavel Stehule <pavel.stehule@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3278793.1626198638%40sss.pgh.pa.us
When locking a specific named relation for a FOR [KEY] UPDATE/SHARE
clause, transformLockingClause() finds the relation to lock by
scanning the rangetable for an RTE with a matching eref->aliasname.
However, it failed to account for the visibility rules of a join RTE.
If a join RTE doesn't have a user-supplied alias, it will have a
generated eref->aliasname of "unnamed_join" that is not visible as a
relation name in the parse namespace. Such an RTE needs to be skipped,
otherwise it might be found in preference to a regular base relation
with a user-supplied alias of "unnamed_join", preventing it from being
locked.
In addition, if a join RTE doesn't have a user-supplied alias, but
does have a join_using_alias, then the RTE needs to be matched using
that alias rather than the generated eref->aliasname, otherwise a
misleading "relation not found" error will be reported rather than a
"join cannot be locked" error.
Backpatch all the way, except for the second part which only goes back
to 14, where JOIN USING aliases were added.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCUY_KOBnqxbTSPf=7fz9HWPnZ5Xgb9SwYzZ8rFXe7nb=w@mail.gmail.com
When we changed some built-in functions to use anycompatiblearray
instead of anyarray, we created a dump/restore hazard for user-defined
operators and aggregates relying on those functions: the user objects
have to be modified to change their signatures similarly. This causes
pg_upgrade to fail partway through if the source installation contains
such objects. We generally try to have pg_upgrade detect such hazards
and fail before it does anything exciting, so add logic to detect
this case too.
Back-patch to v14 where the change was made.
Justin Pryzby, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/3383880.QJadu78ljV@vejsadalnx
We were going into IDLE state too soon when executing queries via
PQsendQuery in pipeline mode, causing several scenarios to misbehave in
different ways -- most notably, as reported by Daniele Varrazzo, that a
warning message is produced by libpq:
message type 0x33 arrived from server while idle
But it is also possible, if queries are sent and results consumed not in
lockstep, for the expected mediating NULL result values from PQgetResult
to be lost (a problem which has not been reported, but which is more
serious).
Fix this by introducing two new concepts: one is a command queue element
PGQUERY_CLOSE to tell libpq to wait for the CloseComplete server
response to the Close message that is sent by PQsendQuery. Because the
application is not expecting any PGresult from this, the mechanism to
consume it is a bit hackish.
The other concept, authored by Horiguchi-san, is a PGASYNC_PIPELINE_IDLE
state for libpq's state machine to differentiate "really idle" from
merely "the idle state that occurs in between reading results from the
server for elements in the pipeline". This makes libpq not go fully
IDLE when the libpq command queue contains entries; in normal cases, we
only go IDLE once at the end of the pipeline, when the server response
to the final SYNC message is received. (However, there are corner cases
it doesn't fix, such as terminating the query sequence by
PQsendFlushRequest instead of PQpipelineSync; this sort of scenario is
what requires PGQUERY_CLOSE bit above.)
This last bit helps make the libpq state machine clearer; in particular
we can get rid of an ugly hack in pqParseInput3 to avoid considering
IDLE as such when the command queue contains entries.
A new test mode is added to libpq_pipeline.c to tickle some related
problematic cases.
Reported-by: Daniele Varrazzo <daniele.varrazzo@gmail.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA+mi_8bvD0_CW3sumgwPvWdNzXY32itoG_16tDYRu_1S2gV2iw@mail.gmail.com
None of the other bison parsers contains this directive, and it gives
rise to some unfortunate and impenetrable messages, so just remove it.
Backpatch to release 12, where it was introduced.
Per gripe from Erik Rijkers
Discussion: https://postgr.es/m/ba069ce2-a98f-dc70-dc17-2ccf2a9bf7c7@xs4all.nl
Per buildfarm member prairiedog, this platform rejects uninitialized
global variables in shared libraries. Back-patch to v10, like the
addition of the variable.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20220703030619.GB2378460@rfd.leadboat.com
ecpglib has been calling it once per SQL query and once per EXEC SQL GET
DESCRIPTOR. Instead, if newlocale() has not succeeded before, call it
while establishing a connection. This mitigates three problems:
- If newlocale() failed in EXEC SQL GET DESCRIPTOR, the command silently
proceeded without the intended locale change.
- On AIX, each newlocale()+freelocale() cycle leaked memory.
- newlocale() CPU usage may have been nontrivial.
Fail the connection attempt if newlocale() fails. Rearrange
ecpg_do_prologue() to validate the connection before its uselocale().
The sort of program that may regress is one running in an environment
where newlocale() fails. If that program establishes connections
without running SQL statements, it will stop working in response to this
change. I'm betting against the importance of such an ECPG use case.
Most SQL execution (any using ECPGdo()) has long required newlocale()
success, so there's little a connection could do without newlocale().
Back-patch to v10 (all supported versions).
Reviewed by Tom Lane. Reported by Guillaume Lelarge.
Discussion: https://postgr.es/m/20220101074055.GA54621@rfd.leadboat.com
Previously, we trusted the OS not to report EEXIST unless we'd passed in
IPC_CREAT | IPC_EXCL or O_CREAT | O_EXCL, as appropriate. Solaris's
shm_open() can in fact do that, causing us to crash because we didn't
ereport and then we blithely assumed the mapping was successful.
Let's treat EEXIST just like any other error, unless we're actually
trying to create a new segment. This applies to shm_open(), where this
behavior has been seen, and also to the equivalent operations for our
sysv and mmap modes just on principle.
Based on the underlying reason for the error, namely contention on a
lock file managed by Solaris librt for each distinct name, this problem
is only likely to happen on 15 and later, because the new shared memory
stats system produces shm_open() calls for the same path from
potentially large numbers of backends concurrently during
authentication. Earlier releases only shared memory segments between a
small number of parallel workers under one Gather node. You could
probably hit it if you tried hard enough though, and we should have been
more defensive in the first place. Therefore, back-patch to all
supported releases.
Per build farm animal margay. This isn't the end of the story, though,
it just changes random crashes into random "File exists" errors; more
work needed for a green build farm.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
TransactionIdIsInProgress had a fast path to return 'false' if the
single-item CLOG cache said that the transaction was known to be
committed. However, that was wrong, because a transaction is first
marked as committed in the CLOG but doesn't become visible to others
until it has removed its XID from the proc array. That could lead to an
error:
ERROR: t_xmin is uncommitted in tuple to be updated
or for an UPDATE to go ahead without blocking, before the previous
UPDATE on the same row was made visible.
The window is usually very short, but synchronous replication makes it
much wider, because the wait for synchronous replica happens in that
window.
Another thing that makes it hard to hit is that it's hard to get such
a commit-in-progress transaction into the single item CLOG cache.
Normally, if you call TransactionIdIsInProgress on such a transaction,
it determines that the XID is in progress without checking the CLOG
and without populating the cache. One way to prime the cache is to
explicitly call pg_xact_status() on the XID. Another way is to use a
lot of subtransactions, so that the subxid cache in the proc array is
overflown, making TransactionIdIsInProgress rely on pg_subtrans and
CLOG checks.
This has been broken ever since it was introduced in 2008, but the race
condition is very hard to hit, especially without synchronous
replication. There were a couple of reports of the error starting from
summer 2021, but no one was able to find the root cause then.
TransactionIdIsKnownCompleted() is now unused. In 'master', remove it,
but I left it in place in backbranches in case it's used by extensions.
Also change pg_xact_status() to check TransactionIdIsInProgress().
Previously, it only checked the CLOG, and returned "committed" before
the transaction was actually made visible to other queries. Note that
this also means that you cannot use pg_xact_status() to reproduce the
bug anymore, even if the code wasn't fixed.
Report and analysis by Konstantin Knizhnik. Patch by Simon Riggs, with
the pg_xact_status() change added by me.
Author: Simon Riggs
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/flat/4da7913d-398c-e2ad-d777-f752cf7f0bbb%40garret.ru
Previously, we encoded both NULL and the first byte at the base address
as 0. That confusion led to the assertion in commit e07d4ddc, which
failed when min_dynamic_shared_memory was used. Give them distinct
encodings, by switching to 1-based offsets for non-NULL pointers. Also
improve macro hygiene in passing (missing/misplaced parentheses), and
remove open-coded access to the raw offset value from freepage.c/h.
Although e07d4ddc was back-patched to 10, the only code that actually
makes use of relptr at the base address arrived in 84b1c63a, so no need
to back-patch further than 14 for now.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20220519193839.GT19626%40telsasoft.com
Since commit 6a2a70a02, we've used signalfd() to receive latch wakeups
when building with WAIT_USE_EPOLL (default for Linux and illumos), and
our traditional self-pipe when falling back to WAIT_USE_POLL (default
for other Unixes with neither epoll() nor kqueue()).
Unexplained hangs and kernel panics have been reported on illumos
systems, apparently linked to this use of signalfd(), leading illumos
users and build farm members to have to define WAIT_USE_POLL explicitly
as a work-around. A bug report exists at
https://www.illumos.org/issues/13700 but no fix is available yet.
Let's provide a way for illumos users to go back to self-pipes with
epoll(), like releases before 14, and choose that by default. No change
for Linux users. To help with development/debugging, macros
WAIT_USE_{EPOLL,POLL} and WAIT_USE_{SIGNALFD,SELF_PIPE} can be defined
explicitly to override the defaults.
Back-patch to 14, where we started using signalfd().
Reported-by: Japin Li <japinli@hotmail.com>
Reported-by: Olaf Bohlen <olbohlen@eenfach.de> (off-list)
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/MEYP282MB1669C8D88F0997354C2313C1B6CA9%40MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
Commit a117cebd63 used the original userid
for ACL checks located directly in DefineIndex(), but it still adopted
the table owner userid for more ACL checks than intended. That broke
dump/reload of indexes that refer to an operator class, collation, or
exclusion operator in a schema other than "public" or "pg_catalog".
Back-patch to v10 (all supported versions), like the earlier commit.
Nathan Bossart and Noah Misch
Discussion: https://postgr.es/m/f8a4105f076544c180a87ef0c4822352@stmuk.bayern.de
Remove the need to edit back-branch-specific code sites when
back-patching the addition of a PostgreSQL::Test::Utils symbol. Replace
per-symbol, incomplete alias lists. Give old and new package names the
same EXPORT and EXPORT_OK semantics. Back-patch to v10 (all supported
versions).
Reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/20220622072144.GD4167527@rfd.leadboat.com
When rebuilding the relation mapping on subscribers, we were not releasing
the attribute mapping's memory which was no longer required.
The attribute mapping used in logical tuple conversion was refactored in
PG13 (by commit e1551f96e6) but we forgot to update the related code that
frees the attribute map.
Author: Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila, Shi yu
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
SPI_commit previously left it up to the caller to recover from any error
occurring during commit. Since that's complicated and requires use of
low-level xact.c facilities, it's not too surprising that no caller got
it right. Let's move the responsibility for cleanup into spi.c. Doing
that requires redefining SPI_commit as starting a new transaction, so
that it becomes equivalent to SPI_commit_and_chain except that you get
default transaction characteristics instead of preserving the prior
transaction's characteristics. We can make this pretty transparent
API-wise by redefining SPI_start_transaction() as a no-op. Callers
that expect to do something in between might be surprised, but
available evidence is that no callers do so.
Having made that API redefinition, we can fix this mess by having
SPI_commit[_and_chain] trap errors and start a new, clean transaction
before re-throwing the error. Likewise for SPI_rollback[_and_chain].
Some cleanup is also needed in AtEOXact_SPI, which was nowhere near
smart enough to deal with SPI contexts nested inside a committing
context.
While plperl and pltcl need no changes beyond removing their now-useless
SPI_start_transaction() calls, plpython needs some more work because it
hadn't gotten the memo about catching commit/rollback errors in the
first place. Such an error resulted in longjmp'ing out of the Python
interpreter, which leaks Python stack entries at present and is reported
to crash Python 3.11 altogether. Add the missing logic to catch such
errors and convert them into Python exceptions.
This is a back-patch of commit 2e517818f. That's now aged long enough
to reduce the concerns about whether it will break something, and we
do need to ensure that supported branches will work with Python 3.11.
Peter Eisentraut and Tom Lane
Discussion: https://postgr.es/m/3375ffd8-d71c-2565-e348-a597d6e739e3@enterprisedb.com
Discussion: https://postgr.es/m/17416-ed8fe5d7213d6c25@postgresql.org
We build the partition map entries on subscribers while applying the
changes for update/delete on partitions. The component relation in each
entry is closed after its use so we need to update it on successive use of
cache entries.
This problem was there since the original commit f1ac27bfda that
introduced this code but we didn't notice it till the recent commit
26b3455afa started to use the component relation of partition map cache
entry.
Reported-by: Tom Lane, as per buildfarm
Author: Amit Langote, Hou Zhijie
Reviewed-by: Amit Kapila, Shi Yu
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
In logical replication, we will check if the target table on the
subscriber is updatable by comparing the replica identity of the table on
the publisher with the table on the subscriber. When the target table is a
partitioned table, we only check its replica identity but not for the
partition tables. This leads to assertion failure while applying changes
for update/delete as we expect those to succeed only when the
corresponding partition table has a primary key or has a replica
identity defined.
Fix it by checking the replica identity of the partition table while
applying changes.
Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
We were not updating the partition map cache in the subscriber even when
the corresponding remote rel is changed. Due to this data was getting
incorrectly replicated for partition tables after the publisher has
changed the table schema.
Fix it by resetting the required entries in the partition map cache after
receiving a new relation mapping from the publisher.
Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
While building a new attrmap which maps partition attribute numbers to
remoterel's, we incorrectly update the map for dropped column attributes.
Later, it caused cache look-up failure when we tried to use the map to
fetch the information about attributes.
This also fixes the partition map cache invalidation which was using the
wrong type cast to fetch the entry. We were using stale partition map
entry after invalidation which leads to the assertion or cache look-up
failure.
Reported-by: Shi Yu
Author: Hou Zhijie, Shi Yu
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
If an application executed operations like EXEC SQL PREPARE
without having first established a database connection, it could
get a core dump instead of the expected clean failure. This
occurred because we did "pthread_getspecific(actual_connection_key)"
without ever having initialized the TSD key actual_connection_key.
The results of that are probably platform-specific, but at least
on Linux it often leads to a crash.
To fix, add calls to ecpg_pthreads_init() in the code paths that
might use actual_connection_key uninitialized. It's harmless
(and hopefully inexpensive) to do that more than once.
Per bug #17514 from Okano Naoki. The problem's ancient, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/17514-edd4fad547c5692c@postgresql.org
This reverts commits a04ccf6df et al. in the back branches only.
There was some disagreement already over whether to back-patch
157f8739a, on the grounds that it is the sort of behavioral
change that we don't like to back-patch. Furthermore, it now
looks like the logic needs some more work, which we don't have
time for before the upcoming 14.4 release. Revert for now, and
perhaps reconsider later.
Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org
In commit ec62cb0aa, I foolishly replaced ExecEvalWholeRowVar's
lookup_rowtype_tupdesc_domain call with just lookup_rowtype_tupdesc,
because I didn't see how a domain could be involved there, and
there were no regression test cases to jog my memory. But the
existing code was correct, so revert that change and add a test
case showing why it's necessary. (Note: per comment in struct
DatumTupleFields, it is correct to produce an output tuple that's
labeled with the base composite type, not the domain; hence just
blindly looking through the domain is correct here.)
Per bug #17515 from Dan Kubb. Back-patch to v11 where domains over
composites became a thing.
Discussion: https://postgr.es/m/17515-a24737438363aca0@postgresql.org
Bug #17512 highlighted that a suitably broken data type could cause the
backend to crash if either the hash function or equality function were in
someway non-deterministic based on their input values. Such a data type
could cause a crash of the backend due to some code which assumes that
we'll always find a hash table entry corresponding to an item in the
Memoize LRU list.
Here we remove the assumption that we'll always find the entry
corresponding to the given LRU list item and add run-time checks to verify
we have found the given item in the cache.
This is not a fix for bug #17512, but it will turn the crash reported by
that bug report into an internal ERROR.
Reported-by: Ales Zeleny
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvpxFSTwvoYWT7kmFVSZ9zLAeHb=S9vrz=RExMgSkQNWqw@mail.gmail.com
Backpatch-through: 14, where Memoize was added.
pg_stat_get_subscription scanned one more LogicalRepWorker array entry
than is really allocated. In the worst case this could lead to SIGSEGV,
if the LogicalRepCtx data structure is near the end of shared memory.
That seems quite unlikely though (thanks to the ordering of calls in
CreateSharedMemoryAndSemaphores) and we've heard no field reports of it.
A more likely misbehavior is one row of garbage data in the function's
result, but even that is not real likely because of the check that the
pid field matches some live backend.
Report and fix by Kuntal Ghosh. This bug is old, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAGz5QCJykEDzW6jQK6Yz7Qh_PMtD=95de_7QoocbVR2Qy8hWZA@mail.gmail.com
An error PGresult generated by libpq itself, such as a report of
connection loss, won't have broken-down error fields.
should_processing_continue() blithely assumed that
PG_DIAG_SEVERITY_NONLOCALIZED would always be present, and would
dump core if it wasn't.
Per grepping to see if 6d157e7cb's mistake was repeated elsewhere.
An error PGresult generated by libpq itself, such as a report of
connection loss, won't have broken-down error fields.
ecpg_raise_backend() blithely assumed that PG_DIAG_MESSAGE_PRIMARY
would always be present, and would end up passing a NULL string
pointer to snprintf when it isn't. That would typically crash
before 3779ac62d, and it would fail to provide a useful error report
in any case. Best practice is to substitute PQerrorMessage(conn)
in such cases, so do that.
Per bug #17421 from Masayuki Hirose. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17421-790ff887e3188874@postgresql.org
psql --single-transaction is able to handle multiple -c and -f switches
in a single transaction since d5563d7d, but this had the surprising
behavior of forcing a transaction COMMIT even if psql failed with an
error in the client (for example incorrect path given to \copy), which
would generate an error, but still commit any changes that were already
applied in the backend. This commit makes the behavior more consistent,
by enforcing a transaction ROLLBACK if any commands fail, both
client-side and backend-side, so as no changes are applied if one error
happens in any of them.
Some tests are added on HEAD to provide some coverage about all that.
Backend-side errors are unreliable as IPC::Run can complain on SIGPIPE
if psql quits before reading a query result, but that should work
properly in the case where any errors come from psql itself, which is
what the original report is about.
Reported-by: Christoph Berg
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org
Backpatch-through: 10
Since a117cebd6, some older gcc versions issue "variable may be used
uninitialized in this function" complaints for brin_summarize_range.
Silence that using the same coding pattern as in bt_index_check_internal;
arguably, a117cebd6 had too narrow a view of which compilers might give
trouble.
Nathan Bossart and Tom Lane. Back-patch as the previous commit was.
Discussion: https://postgr.es/m/20220601163537.GA2331988@nathanxps13
Perl 5.36 has reclassified the warning condition that this test
case used, so that the expected error fails to appear. Tweak
the test so it instead exercises a case that's handled the same
way in all Perl versions of interest.
This appears to meet our standards for back-patching into
out-of-support branches: it changes no user-visible behavior
but enables testing of old branches with newer tools.
Hence, back-patch as far as 9.2.
Dagfinn Ilmari Mannsåker, per report from Jitka Plesníková.
Discussion: https://postgr.es/m/564579.1654093326@sss.pgh.pa.us
This reverts commit d9d076222f "VACUUM: ignore indexing operations
with CONCURRENTLY".
These changes caused indexes created with the CONCURRENTLY option to
miss heap tuples that were HOT-updated and HOT-pruned during the index
creation. Before these changes, HOT pruning would have been prevented
by the Xmin of the transaction creating the index, but because this
change was precisely to allow the Xmin to move forward ignoring that
backend, now other backends scanning the table can prune them. This is
not a problem for VACUUM (which requires a lock that conflicts with a
CREATE INDEX CONCURRENTLY operation), but HOT-prune can definitely
occur. In other words, Xmin advancement was sped up, but at the cost of
corrupting the resulting index.
Regrettably, this means that the new feature in PG14 that RIC/CIC on
very large tables no longer force VACUUM to retain very old tuples goes
away. We might try to implement it again in a later release, but for
now the risk of indexes missing tuples is too high and there's no easy
fix.
Backpatch to 14, where this change appeared.
Reported-by: Peter Slavov <pet.slavov@gmail.com>
Diagnosys-by: Andrey Borodin <x4mmm@yandex-team.ru>
Diagnosys-by: Michael Paquier <michael@paquier.xyz>
Diagnosys-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/17485-396609c6925b982d%40postgresql.org
We hadn't noticed this because (a) few people feed invalid
timezone abbreviation files to the server, and (b) in typical
scenarios guc.c would throw ereport(ERROR) and then transaction
abort handling would silently clean up the leaked file reference.
However, it was possible to observe file leakage warnings if one
breaks an already-active abbreviation file, because guc.c does
not throw ERROR when loading supposedly-validated settings during
session start or SIGHUP processing.
Report and fix by Kyotaro Horiguchi (cosmetic adjustments by me)
Discussion: https://postgr.es/m/20220530.173740.748502979257582392.horikyota.ntt@gmail.com
In the codepath when no encoding conversion is required, the check for
incomplete character at the end of input incorrectly used server
encoding's max character length, instead of the client's. Usually the
server and client encodings are the same when we're not performing
encoding conversion, but SQL_ASCII is an exception.
In the passing, also fix some outdated comments that still talked about
the old COPY protocol. It was removed in v14.
Per bug #17501 from Vitaly Voronov. Backpatch to v14 where this was
introduced.
Discussion: https://www.postgresql.org/message-id/17501-128b1dd039362ae6@postgresql.org
If a short description is specified as NULL in one of the various
DefineCustomXXXVariable() functions available to external modules to
define a custom parameter, SHOW ALL would crash. This change teaches
SHOW ALL to properly handle NULL short descriptions, as well as any code
paths that manipulate it, to gain in flexibility. Note that
help_config.c was already able to do that, when describing a set of GUCs
for postgres --describe-config.
Author: Steve Chavez
Reviewed by: Nathan Bossart, Andres Freund, Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/CAGRrpzY6hO-Kmykna_XvsTv8P2DshGiU6G3j8yGao4mk0CqjHA%40mail.gmail.com
Backpatch-through: 10
Commits a59c79564 et al. tried to sync libpq's SSL key file
permissions checks with what we've used for years in the backend.
We did not intend to create any new failure cases, but it turns out
we did: restricting the key file's ownership breaks cases where the
client is allowed to read a key file despite not having the identical
UID. In particular a client running as root used to be able to read
someone else's key file; and having seen that I suspect that there are
other, less-dubious use cases that this restriction breaks on some
platforms.
We don't really need an ownership check, since if we can read the key
file despite its having restricted permissions, it must have the right
ownership --- under normal conditions anyway, and the point of this
patch is that any additional corner cases where that works should be
deemed allowable, as they have been historically. Hence, just drop
the ownership check, and rearrange the permissions check to get rid
of its faulty assumption that geteuid() can't be zero. (Note that the
comparable backend-side code doesn't have to cater for geteuid() == 0,
since the server rejects that very early on.)
This does have the end result that the permissions safety check used
for a root user's private key file is weaker than that used for
anyone else's. While odd, root really ought to know what she's doing
with file permissions, so I think this is acceptable.
Per report from Yogendra Suralkar. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/MW3PR15MB3931DF96896DC36D21AFD47CA3D39@MW3PR15MB3931.namprd15.prod.outlook.com
ruleutils.c was coded to suppress the AS label for a SELECT output
expression if the column name is "?column?", which is the parser's
fallback if it can't think of something better. This is fine, and
avoids ugly clutter, so long as (1) nothing further up in the parse
tree relies on that column name or (2) the same fallback would be
assigned when the rule or view definition is reloaded. Unfortunately
(2) is far from certain, both because ruleutils.c might print the
expression in a different form from how it was originally written
and because FigureColname's rules might change in future releases.
So we shouldn't rely on that.
Detecting exactly whether there is any outer-level use of a SELECT
column name would be rather expensive. This patch takes the simpler
approach of just passing down a flag indicating whether there *could*
be any outer use; for example, the output column names of a SubLink
are not referenceable, and we also do not care about the names exposed
by the right-hand side of a setop. This is sufficient to suppress
unwanted clutter in all but one case in the regression tests. That
seems like reasonable evidence that it won't be too much in users'
faces, while still fixing the cases we need to fix.
Per bug #17486 from Nicolas Lutic. This issue is ancient, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/17486-1ad6fd786728b8af@postgresql.org
When an implicit operator family is created, it wasn't getting reported.
Make it do so.
This has always been missing. Backpatch to 10.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-by: Leslie LEMAIRE <leslie.lemaire@developpement-durable.gouv.fr>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/f74d69e151b22171e8829551b1159e77@developpement-durable.gouv.fr
This is a slight, convenient semantics change from what commit
0f0cfb4940 ("Fix parallel operations that prevent oldest xmin from
advancing") introduced that lets us simplify the coding in the one place
where it is used.
Backpatch to 13. This is related to commit 6fea65508a ("Tighten
ComputeXidHorizons' handling of walsenders") rewriting the code site
where this is used, which has not yet been backpatched, but it may well
be in the future.
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/202204191637.eldwa2exvguw@alvherre.pgsql
We weren't checking the length of the column list in the alias clause of
an XMLTABLE or JSON_TABLE function (a "tablefunc" RTE), and it was
possible to make the server crash by passing an overly long one. Fix it
by throwing an error in that case, like the other places that deal with
alias lists.
In passing, modify the equivalent test used for join RTEs to look like
the other ones, which was different for no apparent reason.
This bug came in when XMLTABLE was born in version 10; backpatch to all
stable versions.
Reported-by: Wang Ke <krking@zju.edu.cn>
Discussion: https://postgr.es/m/17480-1c9d73565bb28e90@postgresql.org
In order to estimate the cache hit ratio of a Memoize node, one of the
inputs we require is the estimated number of times the Memoize node will
be rescanned. The higher this number, the large the cache hit ratio is
likely to become. Unfortunately, the value being passed as the number of
"calls" to the Memoize was incorrectly using the Nested Loop's
outer_path->parent->rows instead of outer_path->rows. This failed to
account for the fact that the outer_path might be parameterized by some
upper-level Nested Loop.
This problem could lead to Memoize plans appearing more favorable than
they might actually be. It could also lead to extended executor startup
times when work_mem values were large due to the planner setting overly
large MemoizePath->est_entries resulting in the Memoize hash table being
initially made much larger than might be required.
Fix this simply by passing outer_path->rows rather than
outer_path->parent->rows. Also, adjust the expected regression test
output for a plan change.
Reported-by: Pavel Stehule
Author: David Rowley
Discussion: https://postgr.es/m/CAFj8pRAMp%3DQsMi6sPQJ4W3hczoFJRvyXHJV3AZAZaMyTVM312Q%40mail.gmail.com
Backpatch-through: 14, where Memoize was introduced
If a cluster is promoted (aka the control file shows a state different
than DB_IN_ARCHIVE_RECOVERY) while CreateRestartPoint() is still
processing, this function could miss an update of the control file for
"checkPoint" and "checkPointCopy" but still do the recycling and/or
removal of the past WAL segments, assuming that the to-be-updated LSN
values should be used as reference points for the cleanup. This causes
a follow-up restart attempting crash recovery to fail with a PANIC on a
missing checkpoint record if the end-of-recovery checkpoint triggered by
the promotion did not complete while the cluster abruptly stopped or
crashed before the completion of this checkpoint. The PANIC would be
caused by the redo LSN referred in the control file as located in a
segment already gone, recycled by the previous restartpoint with
"checkPoint" out-of-sync in the control file.
This commit fixes the update of the control file during restartpoints so
as "checkPoint" and "checkPointCopy" are updated even if the cluster has
been promoted while a restartpoint is running, to be on par with the set
of WAL segments actually recycled in the end of CreateRestartPoint().
7863ee4 has fixed this problem already on master, but the release timing
of the latest point versions did not let me enough time to study and fix
that on all the stable branches.
Reported-by: Fujii Masao, Rui Zhao
Author: Kyotaro Horiguchi
Reviewed-by: Nathan Bossart, Michael Paquier
Discussion: https://postgr.es/m/20220316.102444.2193181487576617583.horikyota.ntt@gmail.com
Backpatch-through: 10
This follows in the footsteps of commit 2591ee8ec by removing one more
ill-advised shortcut from planning of GroupingFuncs. It's true that
we don't intend to execute the argument expression(s) at runtime, but
we still have to process any Vars appearing within them, or we risk
failure at setrefs.c time (or more fundamentally, in EXPLAIN trying
to print such an expression). Vars in upper plan nodes have to have
referents in the next plan level, whether we ever execute 'em or not.
Per bug #17479 from Michael J. Sullivan. Back-patch to all supported
branches.
Richard Guo
Discussion: https://postgr.es/m/17479-6260deceaf0ad304@postgresql.org
The problem is that we don't send keep-alive messages for a long time
while processing large transactions during logical replication where we
don't send any data of such transactions. This can happen when the table
modified in the transaction is not published or because all the changes
got filtered. We do try to send the keep_alive if necessary at the end of
the transaction (via WalSndWriteData()) but by that time the
subscriber-side can timeout and exit.
To fix this we try to send the keepalive message if required after
processing certain threshold of changes.
Reported-by: Fabrice Chapuis
Author: Wang wei and Amit Kapila
Reviewed By: Masahiko Sawada, Euler Taveira, Hou Zhijie, Hayato Kuroda
Backpatch-through: 10
Discussion: https://postgr.es/m/CAA5-nLARN7-3SLU_QUxfy510pmrYK6JJb=bk3hcgemAM_pAv+w@mail.gmail.com
The current setup assumes that commands for lz4, zstd and gzip always
exist by default if not enforced by a user's environment. However,
vcpkg, as one example, installs libraries but no binaries, so this
default setup to assume that a command should always be present would
cause failures. This commit improves the detection of such external
commands as follows:
* If a ENV value is available, trust the environment/user and use it.
* If a ENV value is not available, check its execution by looking in the
current PATH, by launching a simple "$command --version" (that should be
portable enough).
** On execution failure, ignore ENV{command}.
** On execution success, set ENV{command} = "$command".
Note that this new rule applies to gzip, lz4 and zstd but not tar that
we assume will always exist. Those commands are set up in the
environment only when using bincheck and taptest. The CI includes all
those commands and I have checked that their setup is correct there. I
have also tested this change in a MSVC environment where we have none of
those commands.
While on it, remove the references to lz4 from the documentation and
vcregress.pl in ~v13. --with-lz4 has been added in v14~ so there is no
point to have this information in these older branches.
Reported-by: Andrew Dunstan
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/14402151-376b-a57a-6d0c-10ad12608e12@dunslane.net
Backpatch-through: 10
The parser code that transformed VALUES from row-oriented to
column-oriented lists failed if there were zero columns.
You can't write that straightforwardly (though probably you
should be able to), but the case can be reached by expanding
a "tab.*" reference to a zero-column table.
Per bug #17477 from Wang Ke. Back-patch to all supported branches.
Discussion: https://postgr.es/m/17477-0af3c6ac6b0a6ae0@postgresql.org
This reverts commit eafdf9de06
and its back-branch counterparts. Corey Huinker pointed out that
we'd discussed this exact change back in 2016 and rejected it,
on the grounds that there's at least one usage pattern with LIMIT
where an infinite endpoint can usefully be used. Perhaps that
argument needs to be re-litigated, but there's no time left before
our back-branch releases. To keep our options open, restore the
status quo ante; if we do end up deciding to change things, waiting
one more quarter won't hurt anything.
Rather than just doing a straight revert, I added a new test case
demonstrating the usage with LIMIT. That'll at least remind us of
the issue if we forget again.
Discussion: https://postgr.es/m/3603504.1652068977@sss.pgh.pa.us
Discussion: https://postgr.es/m/CADkLM=dzw0Pvdqp5yWKxMd+VmNkAMhG=4ku7GnCZxebWnzmz3Q@mail.gmail.com
It intended to, but did not, achieve this. Adopt the new standard of
setting user ID just after locking the relation. Back-patch to v10 (all
supported versions).
Reviewed by Simon Riggs. Reported by Alvaro Herrera.
Security: CVE-2022-1552
When a feature enumerates relations and runs functions associated with
all found relations, the feature's user shall not need to trust every
user having permission to create objects. BRIN-specific functionality
in autovacuum neglected to account for this, as did pg_amcheck and
CLUSTER. An attacker having permission to create non-temp objects in at
least one schema could execute arbitrary SQL functions under the
identity of the bootstrap superuser. CREATE INDEX (not a
relation-enumerating operation) and REINDEX protected themselves too
late. This change extends to the non-enumerating amcheck interface.
Back-patch to v10 (all supported versions).
Sergey Shinderuk, reviewed (in earlier versions) by Alexander Lakhin.
Reported by Alexander Lakhin.
Security: CVE-2022-1552
f40d362a66 disabled part of 031_recovery_conflict.pl due to instability
that's not trivial to fix in the back branches. That fixed most of the
issues. But there was one more failure (on lapwing / REL_10_STABLE).
That failure looks like it might be caused by a genuine problem. Disable the
test until after the set of releases, to avoid packagers etc potentially
having to fight with a test failure they can't do anything about.
Discussion: https://postgr.es/m/3447060.1652032749@sss.pgh.pa.us
Backpatch: 10-14
The recovery deadlock test has a timing issue that was fixed in 5136967f1e in
HEAD. Unfortunately the same fix doesn't quite work in the back branches: 1)
adjust_conf() doesn't exist, which is easy enough to work around 2) a restart
cleares the recovery conflict stats < 15.
These issues can be worked around, but given the upcoming set of minor
releases, skip the problematic test for now. The buildfarm doesn't show
failures in other parts of 031_recovery_conflict.pl.
Discussion: https://postgr.es/m/20220506155827.dfnaheq6ufylwrqf@alap3.anarazel.de
Backpatch: 10-14
The tests added in 9f8a050f68 failed nearly reliably on FreeBSD in CI, and
occasionally on the buildfarm. That turns out to be caused not by a bug in the
test, but by a longstanding bug in recovery conflict handling.
The standby timeout handler, used by ResolveRecoveryConflictWithBufferPin(),
executed SendRecoveryConflictWithBufferPin() inside a signal handler. A bad
idea, because the deadlock timeout handler (or a spurious latch set) could
have interrupted ProcWaitForSignal(). If unlucky that could cause a
self-deadlock on ProcArrayLock, if the deadlock check is in
SendRecoveryConflictWithBufferPin()->CancelDBBackends().
To fix, set a flag in StandbyTimeoutHandler(), and check the flag in
ResolveRecoveryConflictWithBufferPin().
Subsequently the recovery conflict tests will be backpatched.
Discussion: https://postgr.es/m/20220413002626.udl7lll7f3o7nre7@alap3.anarazel.de
Backpatch: 10-
mark_async_capable_plan(), which is called from create_append_plan() to
determine whether subplans are async-capable, failed to take into
account that the given subplan created from a given subpath might
include a gating Result node if the subpath is a SubqueryScanPath or
ForeignPath, causing a segmentation fault there when the subplan created
from a SubqueryScanPath includes the Result node, or causing
ExecAsyncRequest() to throw an error about an unrecognized node type
when the subplan created from a ForeignPath includes the Result node,
because in the latter case the Result node was unintentionally
considered as async-capable, but we don't currently support executing
Result nodes asynchronously. Fix by modifying mark_async_capable_plan()
to disable asynchronous execution in such cases. Also, adjust code in
the ProjectionPath case in mark_async_capable_plan(), for consistency
with other cases, and adjust/improve comments there.
is_async_capable_path() added in commit 27e1f1456, which was rewritten
to mark_async_capable_plan() in a later commit, has the same issue,
causing the error at execution mentioned above, so back-patch to v14
where the aforesaid commit went in.
Per report from Justin Pryzby.
Etsuro Fujita, reviewed by Zhihong Yu and Justin Pryzby.
Discussion: https://postgr.es/m/20220408124338.GK24419%40telsasoft.com
For some reason by default the mingw C Runtime takes it upon itself to
expand program arguments that look like shell globbing characters. That
has caused much scratching of heads and mis-attribution of the causes of
some TAP test failures, so stop doing that.
This removes an inconsistency with Windows binaries built with MSVC,
which have no such behaviour.
Per suggestion from Noah Misch.
Backpatch to all live branches.
Discussion: https://postgr.es/m/20220423025927.GA1274057@rfd.leadboat.com
This function looks for a reference to the recursive WITH CTE,
but it checked only the CTE name not ctelevelsup, so that it could
seize on a lower CTE that happened to have the same name. This
would result in planner failures later, either weird errors such as
"could not find attribute 2 in subquery targetlist", or crashes
or assertion failures. The code also merely Assert'ed that it found
a matching entry, which is not guaranteed at all by the parser.
Per bugs #17320 and #17318 from Zhiyong Wu.
Thanks to Kyotaro Horiguchi for investigation.
Discussion: https://postgr.es/m/17320-70e37868182512ab@postgresql.org
Discussion: https://postgr.es/m/17318-2eb65a3a611d2368@postgresql.org
inline_cte() expected to find exactly as many references to the
target CTE as its cterefcount indicates. While that should be
accurate for the tree as emitted by the parser, there are some
optimizations that occur upstream of here that could falsify it,
notably removal of unused subquery output expressions.
Trying to make the accounting 100% accurate seems expensive and
doomed to future breakage. It's not really worth it, because
all this code is protecting is downstream assumptions that every
referenced CTE has a plan. Let's convert those assertions to
regular test-and-elog just in case there's some actual problem,
and then drop the failing assertion.
Per report from Tomas Vondra (thanks also to Richard Guo for
analysis). Back-patch to v12 where the faulty code came in.
Discussion: https://postgr.es/m/29196a1e-ed47-c7ca-9be2-b1c636816183@enterprisedb.com
Commit b3b4d8e68a moved our perl test modules to a better namespace
structure, but this has made life hard for people wishing to backpatch
improvements in the TAP tests. Here we alleviate much of that difficulty
by implementing the new module names on top of the old modules, mostly
by using a little perl typeglob aliasing magic, so that we don't have a
dual maintenance burden. This should work both for the case where a new
test is backpatched and the case where a fix to an existing test that
uses the new namespace is backpatched.
Reviewed by Michael Paquier
Per complaint from Andres Freund
Discussion: https://postgr.es/m/20220418141530.nfxtkohefvwnzncl@alap3.anarazel.de
Applied to branches 10 through 14
CLUSTER sort won't use the datum1 SortTuple field when clustering
against an index whose leading key is an expression. This makes it
unsafe to use the abbreviated keys optimization, which was missed by the
logic that sets up SortSupport state. Affected tuplesorts output tuples
in a completely bogus order as a result (the wrong SortSupport based
comparator was used for the leading attribute).
This issue is similar to the bug fixed on the master branch by recent
commit cc58eecc5d. But it's a far older issue, that dates back to the
introduction of the abbreviated keys optimization by commit 4ea51cdfe8.
Backpatch to all supported versions.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKG+bA+bmwD36_oDxAoLrCwZjVtST2fqe=b4=qZcmU7u89A@mail.gmail.com
Backpatch: 10-
Such cases will lead to infinite loops, so they're of no practical
value. The numeric variant of generate_series() already threw error
for this, so borrow its message wording.
Per report from Richard Wesley. Back-patch to all supported branches.
Discussion: https://postgr.es/m/91B44E7B-68D5-448F-95C8-B4B3B0F5DEAF@duckdblabs.com
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
An ALTER FUNCTION command that tried to update both the function's
proparallel property and its proconfig list failed to do the former,
because it stored the new proparallel value into a tuple that was
no longer the interesting one. Carelessness in 7aea8e4f2.
(I did not bother with a regression test, because the only likely
future breakage would be for someone to ignore the comment I added
and add some other field update after the heap_modify_tuple step.
A test using existing function properties could not catch that.)
Per report from Bryn Llewellyn. Back-patch to all supported branches.
Discussion: https://postgr.es/m/8AC9A37F-99BD-446F-A2F7-B89AD0022774@yugabyte.com
The new numeric code for extract epoch from interval accidentally
truncated the DAYS_PER_YEAR value to an integer, leading to results
that mismatched the floating-point interval_part calculations.
The commit a2da77cdb4 that introduced
this actually contains the regression test change that this reverts.
I suppose this was missed at the time.
Reported-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAAvxfHd5n%3D13NYA2q_tUq%3D3%3DSuWU-CufmTf-Ozj%3DfrEgt7pXwQ%40mail.gmail.com
Don't try to look at the attidentity field of system attributes,
because they're not there in the TupleDescAttr array. Sometimes
this is harmless because we accidentally pick up a zero, but
otherwise we'll report "no owned sequence found" from an attempt
to alter a system attribute. (It seems possible that a SIGSEGV
could occur, too, though I've not seen it in testing.)
It's not in this function's charter to complain that you can't
alter a system column, so instead just hard-wire an assumption
that system attributes aren't identities. I didn't bother with
a regression test because the appearance of the bug is very
erratic.
Per bug #17465 from Roman Zharkov. Back-patch to all supported
branches. (There's not actually a live bug before v12, because
before that get_attidentity() did the right thing anyway.
But for consistency I changed the test in the older branches too.)
Discussion: https://postgr.es/m/17465-f2a554a6cb5740d3@postgresql.org
This test, introduced in df86e52, uses a second standby to check that
it is able to remove correctly RECOVERYHISTORY and RECOVERYXLOG at the
end of recovery. This standby uses the archives of the primary to
restore its contents, with some of the archive's contents coming from
the first standby previously promoted. In slow environments, it was
possible that the test did not check what it should, as the history file
generated by the promotion of the first standby may not be stored yet on
the archives the second standby feeds on. So, it could be possible that
the second standby selects an incorrect timeline, without restoring a
history file at all.
This commits adds a wait phase to make sure that the history file
required by the second standby is archived before this cluster is
created. This relies on poll_query_until() with pg_stat_file() and an
absolute path, something not supported in REL_10_STABLE.
While on it, this adds a new test to check that the history file has
been restored by looking at the logs of the second standby. This
ensures that a RECOVERYHISTORY, whose removal needs to be checked,
is created in the first place. This should make the test more robust.
This test has been introduced by df86e52, but it came in light as an
effect of the bug fixed by acf1dd42, where the extra restore_command
calls made the test much slower.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/YlT23IvsXkGuLzFi@paquier.xyz
Backpatch-through: 11
The target failed, tested $PATH binaries, or tested a stale temporary
installation. Commit c66b438db6 missed
this. Back-patch to v10 (all supported versions).
The back-patch of commit bbace5697d had
the unfortunate effect of changing the layout of PGPROC in the
back-branches, which could break extensions. This happened because it
changed the delayChkpt from type bool to type int. So, change it back,
and add a new bool delayChkptEnd field instead. The new field should
fall within what used to be padding space within the struct, and so
hopefully won't cause any extensions to break.
Per report from Markus Wanner and discussion with Tom Lane and others.
Patch originally by me, somewhat revised by Markus Wanner per a
suggestion from Michael Paquier. A very similar patch was developed
by Kyotaro Horiguchi, but I failed to see the email in which that was
posted before writing one of my own.
Discussion: http://postgr.es/m/CA+Tgmoao-kUD9c5nG5sub3F7tbo39+cdr8jKaOVEs_1aBWcJ3Q@mail.gmail.com
Discussion: http://postgr.es/m/20220406.164521.17171257901083417.horikyota.ntt@gmail.com
heap_fetch() used to have a "keep_buf" parameter that told it to return
ownership of the buffer pin to the caller after finding that the
requested tuple TID exists but is invisible to the specified snapshot.
This was thoughtlessly removed in commit 5db6df0c0, which broke
heapam_tuple_lock() (formerly EvalPlanQualFetch) because that function
needs to do more accesses to the tuple even if it's invisible. The net
effect is that we would continue to touch the page for a microsecond or
two after releasing pin on the buffer. Usually no harm would result;
but if a different session decided to defragment the page concurrently,
we could see garbage data and mistakenly conclude that there's no newer
tuple version to chain up to. (It's hard to say whether this has
happened in the field. The bug was actually found thanks to a later
change that allowed valgrind to detect accesses to non-pinned buffers.)
The most reasonable way to fix this is to reintroduce keep_buf,
although I made it behave slightly differently: buffer ownership
is passed back only if there is a valid tuple at the requested TID.
In HEAD, we can just add the parameter back to heap_fetch().
To avoid an API break in the back branches, introduce an additional
function heap_fetch_extended() in those branches.
In HEAD there is an additional, less obvious API change: tuple->t_data
will be set to NULL in all cases where buffer ownership is not returned,
in particular when the tuple exists but fails the time qual (and
!keep_buf). This is to defend against any other callers attempting to
access non-pinned buffers. We concluded that making that change in back
branches would be more likely to introduce problems than cure any.
In passing, remove a comment about heap_fetch that was obsoleted by
9a8ee1dc6.
Per bug #17462 from Daniil Anisimov. Back-patch to v12 where the bug
was introduced.
Discussion: https://postgr.es/m/17462-9c98a0f00df9bd36@postgresql.org
It's possible for the query that "waits for restart" to complete a
successful iteration before the postmaster has noticed its SIGKILL'd
child and begun the restart cycle. (This is a bit hard to believe
perhaps, but it's been seen at least twice in the buildfarm, mainly
on ancient platforms that likely have quirky schedulers.)
To provide a more secure interlock, wait for the other session
we're using to report that it's been forcibly shut down.
Patch by me, based on a suggestion from Andres Freund.
Back-patch to v14 where this test case came in.
Discussion: https://postgr.es/m/1801850.1649047827@sss.pgh.pa.us
The expected backend message after SIGQUIT changed in commit
7e784d1dc, but we missed updating this test case. Also, experience
shows that we might sometimes get "could not send data to server"
instead of either of the libpq messages the test is looking for.
Per report from Mark Dilger. Back-patch to v14 where the
backend message changed.
Discussion: https://postgr.es/m/17BD82D7-49AC-40C9-8204-E7ADD30321A0@enterprisedb.com
pg_stat_get_replication_slot() accidentally was marked as non-strict, crashing
when called with NULL input. As it's already released, introduce an explicit
NULL check in 14, fix the catalog in HEAD.
Bumps catversion in HEAD.
Discussion: https://postgr.es/m/20220326212432.s5n2maw6kugnpyxw@alap3.anarazel.de
Backpatch: 14-, where replication slot stats were introduced
After closedir() dirent->d_name is not valid anymore. As there alerady are a
few places relying on the limited lifetime of pg_waldump, do so here as well,
and just pg_strdup() the string.
The bug was introduced in fc49e24fa6.
Found by UBSan, run locally.
Backpatch: 11-, like fc49e24fa6 itself.
Commit 8c6d30f21 caused this function to fail to set *displen
in the PS_USE_NONE code path. If the variable's previous value
had been negative, that'd lead to a memory clobber at some call
sites. We'd managed not to notice due to very thin test coverage
of such configurations, but this appears to explain buildfarm member
lorikeet's recent struggles.
Credit to Andrew Dunstan for spotting the problem. Back-patch
to v13 where the bug was introduced.
Discussion: https://postgr.es/m/136102.1648320427@sss.pgh.pa.us
clang 13 with -Wextra warns that "performing pointer subtraction with
a null pointer has undefined behavior" in the places where freepage.c
tries to set a relptr variable to constant NULL. This appears to be
a compiler bug, but it's unlikely to get fixed instantly. Fortunately,
we can work around it by introducing an inline support function, which
seems like a good change anyway because it removes the macro's existing
double-evaluation hazard.
Backpatch to v10 where this code was introduced.
Patch by me, based on an idea of Andres Freund's.
Discussion: https://postgr.es/m/48826.1648310694@sss.pgh.pa.us
The previous method for doing that was to write zeroes into a
predetermined set of page locations. However, there's a roughly
1-in-64K chance that the existing checksum will match by chance,
and yesterday several buildfarm animals started to reproducibly
see that, resulting in test failures because no checksum mismatch
was reported.
Since the checksum includes the page LSN, test success depends on
the length of the installation's WAL history, which is affected by
(at least) the initial catalog contents, the set of locales installed
on the system, and the length of the pathname of the test directory.
Sooner or later we were going to hit a chance match, and today is
that day.
Harden these tests by specifically inverting the checksum field and
leaving all else alone, thereby guaranteeing that the checksum is
incorrect.
In passing, fix places that were using seek() to set up for syswrite(),
a combination that the Perl docs very explicitly warn against. We've
probably escaped problems because no regular buffered I/O is done on
these filehandles; but if it ever breaks, we wouldn't deserve or get
much sympathy.
Although we've only seen problems in HEAD, now that we recognize the
environmental dependencies it seems like it might be just a matter
of time until someone manages to hit this in back-branch testing.
Hence, back-patch to v11 where we started doing this kind of test.
Discussion: https://postgr.es/m/3192026.1648185780@sss.pgh.pa.us
Crash recovery on standby may encounter missing directories when
replaying create database WAL records. Prior to this patch, the standby
would fail to recover in such a case. However, the directories could be
legitimately missing. Consider a sequence of WAL records as follows:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the tablespace
directory, the standby crashes and has to replay the create database
record again, the crash recovery must be able to move on.
This patch adds a mechanism similar to invalid-page tracking, to keep a
tally of missing directories during crash recovery. If all the missing
directory references are matched with corresponding drop records at the
end of crash recovery, the standby can safely continue following the
primary.
Backpatch to 13, at least for now. The bug is older, but fixing it in
older branches requires more careful study of the interactions with
commit e6d8069522, which appeared in 13.
A new TAP test file is added to verify the condition. However, because
it depends on commit d6d317dbf6, it can only be added to branch
master. I (Álvaro) manually verified that the code behaves as expected
in branch 14. It's a bit nervous-making to leave the code uncovered by
tests in older branches, but leaving the bug unfixed is even worse.
Also, the main reason this fix took so long is precisely that we
couldn't agree on a good strategy to approach testing for the bug, so
perhaps this is the best we can do.
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Author: Paul Guo <paulguo@gmail.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
It seems possible for the condition being tested to be true in
production, and nobody would never know (except when some data
eventually becomes corrupt?).
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m//202109040001.zky3wgv2qeqg@alvherre.pgsql
Invalidate abortedRecPtr and missingContrecPtr after a missing
continuation record is successfully skipped on a standby. This fixes a
PANIC caused when a recently promoted standby attempts to write an
OVERWRITE_RECORD with an LSN of the previously read aborted record.
Backpatch to 10 (all stable versions).
Author: Sami Imseih <simseih@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/44D259DE-7542-49C4-8A52-2AB01534DCA9@amazon.com
When cross-building to windows, or building with mingw on windows, the build
could fail with
x86_64-w64-mingw32-gcc: error: win32ver.o: No such file or director
because pg_dumpall didn't depend on WIN32RES, but it's recipe references
it. The build nevertheless succeeded most of the time, due to
pg_dump/pg_restore having the required dependency, causing win32ver.o to be
built.
Reported-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGJeekpUPWW6yCVdf9=oBAcCp86RrBivo4Y4cwazAzGPng@mail.gmail.com
Backpatch: 10-, omission present on all live branches
This issue is environment-sensitive, where the SSL tests could fail in
various way by feeding on defaults provided by sslcert, sslkey,
sslrootkey, sslrootcert, sslcrl and sslcrldir coming from a local setup,
as of ~/.postgresql/ by default. Horiguchi-san has reported two
failures, but more advanced testing from me (aka inclusion of garbage
SSL configuration in ~/.postgresql/ for all the configuration
parameters) has showed dozens of failures that can be triggered in the
whole test suite.
History has showed that we are not good when it comes to address such
issues, fixing them locally like in dd87799, and such problems keep
appearing. This commit strengthens the entire test suite to put an end
to this set of problems by embedding invalid default values in all the
connection strings used in the tests. The invalid values are prefixed
in each connection string, relying on the follow-up values passed in the
connection string to enforce any invalid value previously set. Note
that two tests related to CRLs are required to fail with certain pre-set
configurations, but we can rely on enforcing an empty value instead
after the invalid set of values.
Reported-by: Kyotaro Horiguchi
Reviewed-by: Andrew Dunstan, Daniel Gustafsson, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20220316.163658.1122740600489097632.horikyota.ntt@gmail.com
backpatch-through: 10
The planner needs to treat GroupingFunc like Aggref for many purposes,
in particular with respect to processing of the argument expressions,
which are not to be evaluated at runtime. A few places hadn't gotten
that memo, notably including subselect.c's processing of outer-level
aggregates. This resulted in assertion failures or wrong plans for
cases in which a GROUPING() construct references an outer aggregation
level.
Also fix missing special cases for GroupingFunc in cost_qual_eval
(resulting in wrong cost estimates for GROUPING(), although it's
not clear that that would affect plan shapes in practice) and in
ruleutils.c (resulting in excess parentheses in pretty-print mode).
Per bug #17088 from Yaoguang Chen. Back-patch to all supported
branches.
Richard Guo, Tom Lane
Discussion: https://postgr.es/m/17088-e33882b387de7f5c@postgresql.org
DROP INDEX needs to lock the index's table before the index itself,
else it will deadlock against ordinary queries that acquire the
relation locks in that order. This is correctly mechanized for
plain indexes by RangeVarCallbackForDropRelation; but in the case of
a partitioned index, we neglected to lock the child tables in advance
of locking the child indexes. We can fix that by traversing the
inheritance tree and acquiring the needed locks in RemoveRelations,
after we have acquired our locks on the parent partitioned table and
index.
While at it, do some refactoring to eliminate confusion between
the actual and expected relkind in RangeVarCallbackForDropRelation.
We can save a couple of syscache lookups too, by having that function
pass back info that RemoveRelations will need.
Back-patch to v11 where partitioned indexes were added.
Jimmy Yih, Gaurab Dey, Tom Lane
Discussion: https://postgr.es/m/BYAPR05MB645402330042E17D91A70C12BD5F9@BYAPR05MB6454.namprd05.prod.outlook.com
The output of table_to_xmlschema() and allied functions includes
a regex describing valid values for these types ... but the regex
was itself invalid, as it failed to escape a literal "+" sign.
Report and fix by Renan Soares Lopes. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/7f6fabaa-3f8f-49ab-89ca-59fbfe633105@me.com
In commit bf7ca1587, I had the bright idea that we could make the
result of a whole-row Var (that is, foo.*) track any column aliases
that had been applied to the FROM entry the Var refers to. However,
that's not terribly logically consistent, because now the output of
the Var is no longer of the named composite type that the Var claims
to emit. bf7ca1587 tried to handle that by changing the output
tuple values to be labeled with a blessed RECORD type, but that's
really pretty disastrous: we can wind up storing such tuples onto
disk, whereupon they're not readable by other sessions.
The only practical fix I can see is to give up on what bf7ca1587
tried to do, and say that the column names of tuples produced by
a whole-row Var are always those of the underlying named composite
type, query aliases or no. While this introduces some inconsistencies,
it removes others, so it's not that awful in the abstract. What *is*
kind of awful is to make such a behavioral change in a back-patched
bug fix. But corrupt data is worse, so back-patched it will be.
(A workaround available to anyone who's unhappy about this is to
introduce an extra level of sub-SELECT, so that the whole-row Var is
referring to the sub-SELECT's output and not to a named table type.
Then the Var is of type RECORD to begin with and there's no issue.)
Per report from Miles Delahunty. The faulty commit dates to 9.5,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/2950001.1638729947@sss.pgh.pa.us
Commit 83fd4532a7 allowed publishing of changes via ancestors, for
publications defined with publish_via_partition_root. But the way
the ancestor was determined in get_rel_sync_entry() was incorrect,
simply updating the same variable. So with multiple publications,
replicating different ancestors, the outcome depended on the order
of publications in the list - the value from the last loop was used,
even if it wasn't the top-most ancestor.
This is a probably rare situation, as in most cases publications do
not overlap, so each partition has exactly one candidate ancestor
to replicate as and there's no ambiguity.
Fixed by tracking the "ancestor level" for each publication, and
picking the top-most ancestor. Adds a test case, verifying the
correct ancestor is used for publishing the changes and that this
does not depend on order of publications in the list.
Older releases have another bug in this loop - once all actions are
replicated, the loop is terminated, on the assumption that inspecting
additional publications is unecessary. But that misses the fact that
those additional applications may replicate different ancestors.
Fixed by removal of this break condition. We might still terminate the
loop in some cases (e.g. when replicating all actions and the ancestor
is the partition root).
Backpatch to 13, where publish_via_partition_root was introduced.
Initial report and fix by me, test added by Hou zj. Reviews and
improvements by Amit Kapila.
Author: Tomas Vondra, Hou zj, Amit Kapila
Reviewed-by: Amit Kapila, Hou zj
Discussion: https://postgr.es/m/d26d24dd-2fab-3c48-0162-2b7f84a9c893%40enterprisedb.com
Commands like ALTER TABLE SET TABLESPACE may leave files for the next
checkpoint to clean up. If such files are not removed by the time DROP
TABLESPACE is called, we request a checkpoint so that they are deleted.
However, there is presently a window before checkpoint start where new
unlink requests won't be scheduled until the following checkpoint. This
means that the checkpoint forced by DROP TABLESPACE might not remove the
files we expect it to remove, and the following ERROR will be emitted:
ERROR: tablespace "mytblspc" is not empty
To fix, add a call to AbsorbSyncRequests() just before advancing the
unlink cycle counter. This ensures that any unlink requests forwarded
prior to checkpoint start (i.e., when ckpt_started is incremented) will
be processed by the current checkpoint. Since AbsorbSyncRequests()
performs memory allocations, it cannot be called within a critical
section, so we also need to move SyncPreCheckpoint() to before
CreateCheckPoint()'s critical section.
This is an old bug, so back-patch to all supported versions.
Author: Nathan Bossart <nathandbossart@gmail.com>
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220215235845.GA2665318%40nathanxps13
If we run out of space in the checkpointer sync request queue (which is
hopefully rare on real systems, but common with very small buffer pool),
we wait for it to drain. While waiting, we should report that as a wait
event so that users know what is going on, and also handle postmaster
death, since otherwise the loop might never terminate if the
checkpointer has exited.
Back-patch to 12. Although the problem exists in earlier releases too,
the code is structured differently before 12 so I haven't gone any
further for now, in the absence of field complaints.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
The checkpointer shouldn't ignore its latch. Other backends may be
waiting for it to drain the request queue. Hopefully real systems don't
have a full queue often, but the condition is reached easily when
shared_buffers is small.
This involves defining a new wait event, which will appear in the
pg_stat_activity view often due to spread checkpoints.
Back-patch only to 14. Even though the problem exists in earlier
branches too, it's hard to hit there. In 14 we stopped using signal
handlers for latches on Linux, *BSD and macOS, which were previously
hiding this problem by interrupting the sleep (though not reliably, as
the signal could arrive before the sleep begins; precisely the problem
latches address).
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
Since LLVM 14 has stopped changing and is about to be released,
back-patch the following changes from the master branch:
e6a7600202807fee1a39a56e7b6601
Back-patch to 11, where LLVM JIT support came in.
Commit 8b069ef5d changed this function to look at pg_constraint.conindid
rather than searching pg_depend. That was a good performance improvement,
but it failed to preserve the exact semantics. The old code would only
return an index that was "owned by" (internally dependent on) the
specified constraint, whereas the new code will also return indexes that
are just referenced by foreign key constraints. This confuses ALTER
TABLE, which was implicitly expecting the previous semantics, into
failing with errors like
ERROR: relation 146621 has multiple clustered indexes
or
ERROR: "pk_attbl" is not an index for table "atref"
We can fix this without reverting the performance improvement by adding
a contype check in get_constraint_index(). Another way could be to
make ALTER TABLE check it, but I'm worried that extension code could
also have subtle dependencies on the old semantics.
Tom Lane and Japin Li, per bug #17409 from Holly Roberts.
Back-patch to v14 where the error crept in.
Discussion: https://postgr.es/m/17409-52871dda8b5741cb@postgresql.org
Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180. Developers may see faster failures by setting that
environment variable to some lesser number of seconds. In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180. This change raises the default for some briefer
timeouts. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
pg_regress reported "Unix socket" as the default location whenever
HAVE_UNIX_SOCKETS is defined. However, that's not been accurate
on Windows since 8f3ec75de. Update this logic to match what libpq
actually does now.
This is just cosmetic, but still it's potentially misleading.
Back-patch to v13 where 8f3ec75de came in.
Discussion: https://postgr.es/m/3894060.1646415641@sss.pgh.pa.us
This macro cast the result to BlockNumber after shifting, not before,
which is the wrong thing. Per the C spec, the uint16 fields would
promote to int not unsigned int, so that (for 32-bit int) the shift
potentially shifts a nonzero bit into the sign position. I doubt
there are any production systems where this would actually end with
the wrong answer, but it is undefined behavior per the C spec, and
clang's -fsanitize=undefined option reputedly warns about it on some
platforms. (I can't reproduce that right now, but the code is
undeniably wrong per spec.) It's easy to fix by casting to
BlockNumber (uint32) in the proper places.
It's been wrong for ages, so back-patch to all supported branches.
Report and patch by Zhihong Yu (cosmetic tweaking by me)
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
This change makes libpq apply the same private-key-file ownership
and permissions checks that we have used in the backend since commit
9a83564c5. Namely, that the private key can be owned by either the
current user or root (with different file permissions allowed in the
two cases). This allows system-wide management of key files, which
is just as sensible on the client side as the server, particularly
when the client is itself some application daemon.
Sync the comments about this between libpq and the backend, too.
Back-patch of a59c79564 and 50f03473e into all supported branches.
David Steele
Discussion: https://postgr.es/m/f4b7bc55-97ac-9e69-7398-335e212f7743@pgmasters.net
Perl can be convinced to execute user-defined code during compilation
of a plperl function (or at least a plperlu function). That's not
such a big problem as long as the activity is confined within the
Perl interpreter, and it's not clear we could do anything about that
anyway. However, if such code tries to use plperl's SPI functions,
we have a bigger problem. In the first place, those functions are
likely to crash because current_call_data->prodesc isn't set up yet.
In the second place, because it isn't set up, we lack critical info
such as whether the function is supposed to be read-only. And in
the third place, this path allows code execution during function
validation, which is strongly discouraged because of the potential
for security exploits. Hence, reject execution of the SPI functions
until compilation is finished.
While here, add check_spi_usage_allowed() calls to various functions
that hadn't gotten the memo about checking that. I think that perhaps
plperl_sv_to_literal may have been intentionally omitted on the grounds
that it was safe at the time; but if so, the addition of transforms
functionality changed that. The others are more recently added and
seem to be flat-out oversights.
Per report from Mark Murawski. Back-patch to all supported branches.
Discussion: https://postgr.es/m/9acdf918-7fff-4f40-f750-2ffa84f083d2@intellasoft.net
When opening a WAL file smaller than XLOG_BLCKSZ (e.g. 0 bytes long) while
determining the wal_segment_size, pg_waldump checked errno, despite errno not
being set by the short read. Resulting in a bogus error message.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220214.181847.775024684568733277.horikyota.ntt@gmail.com
Backpatch: 11-, the bug was introducedin fc49e24fa
If a checkpoint happens during the index build, and the system crashes
after the checkpoint and the index build have finished, the data written
to the index before the checkpoint started could be lost. The checkpoint
won't have fsync'd it, and it won't be replayed at crash recovery either.
Fix by calling smgrimmedsync() after the index build, just like in B-tree
index build.
Backpatch to v14 where the sorted GiST index build was introduced.
Reported-by: Melanie Plageman
Discussion: https://www.postgresql.org/message-id/CAAKRu_ZJJynimxKj5xYBSziL62-iEtPE+fx-B=JzR=jUtP92mw@mail.gmail.com
Commit 3db826bd5 intended that valid_custom_variable_name's
rules for valid identifiers match those of scan.l. However,
I (tgl) had some kind of brain fade and put "_" in the wrong
list.
Fix by Japin Li, per bug #17415 from Daniel Polski.
Discussion: https://postgr.es/m/17415-ebdb683d7e09a51c@postgresql.org
"regress" is a new mode added to compute_query_id aimed at facilitating
regression testing when a module computing query IDs is loaded into the
backend, like pg_stat_statements. It works the same way as "auto",
meaning that query IDs are computed if a module enables it, except that
query IDs are hidden in EXPLAIN outputs to ensure regression output
stability.
Like any GUCs of the kind (force_parallel_mode, etc.), this new
configuration can be added to an instance's postgresql.conf, or just
passed down with PGOPTIONS at command level. compute_query_id uses an
enum for its set of option values, meaning that this addition ensures
ABI compatibility.
Using this new configuration mode allows installcheck-world to pass when
running the tests on an instance with pg_stat_statements enabled,
stabilizing the test output while checking the paths doing query ID
computations.
Reported-by: Anton Melnikov
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/1634283396.372373993@f75.i.mail.ru
Discussion: https://postgr.es/m/YgHlxgc/OimuPYhH@paquier.xyz
Backpatch-through: 14
When cleaning up temporary objects during process exit the cleanup could fail
with:
FATAL: cannot fetch toast data without an active snapshot
The bug is caused by RemoveTempRelationsCallback() not setting up a
snapshot. If an object with toasted catalog data needs to be cleaned up,
init_toast_snapshot() could fail with the above error.
Most of the time however the the problem is masked due to cached catalog
snapshots being returned by GetOldestSnapshot(). But dropping an object can
cause catalog invalidations to be emitted. If no further catalog accesses are
necessary between the invalidation processing and the next toast datum
deletion, the bug becomes visible.
It's easy to miss this bug because it typically happens after clients
disconnect and the FATAL error just ends up in the log.
Luckily temporary table cleanup at the next use of the same temporary schema
or during DISCARD ALL does not have the same problem.
Fix the bug by pushing a snapshot in RemoveTempRelationsCallback(). Also add
isolation tests for temporary object cleanup, including objects with toasted
catalog data.
A future HEAD only commit will add more assertions.
Reported-By: Miles Delahunty
Author: Andres Freund
Discussion: https://postgr.es/m/CAOFAq3BU5Mf2TTvu8D9n_ZOoFAeQswuzk7yziAb7xuw_qyw5gw@mail.gmail.com
Backpatch: 10-
Following migration of Windows buildfarm members running TAP tests to
use of ucrt64 perl for those tests, special processing for msys perl is
no longer necessary and so is removed.
Backpatch to release 10
Discussion: https://postgr.es/m/c65a8781-77ac-ea95-d185-6db291e1baeb@dunslane.net
GCC 12 complains that set_stack_base is storing the address of
a local variable in a long-lived pointer. This is an entirely
reasonable warning (indeed, it just helped us find a bug);
but that behavior is intentional here. We can work around it
by using __builtin_frame_address(0) instead of a specific local
variable; that produces an address a dozen or so bytes different,
in my testing, but we don't care about such a small difference.
Maybe someday a compiler lacking that function will start to issue
a similar warning, but we'll worry about that when it happens.
Patch by me, per a suggestion from Andres Freund. Back-patch to
v12, which is as far back as the patch will go without some pain.
(Recently-established project policy would permit a back-patch as
far as 9.2, but I'm disinclined to expend the work until GCC 12
is much more widespread.)
Discussion: https://postgr.es/m/3773792.1645141467@sss.pgh.pa.us
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
In commit 1f39a1c06 I made PQisBusy consider conn->write_failed, but
that is now looking like complete brain fade. In the first place, the
logic is quite wrong: it ought to be like "and not" rather than "or".
This meant that once we'd gotten into a write_failed state, PQisBusy
would always return true, probably causing the calling application to
iterate its loop until PQconsumeInput returns a hard failure thanks
to connection loss. That's not what we want: the intended behavior
is to return an error PGresult, which the application probably has
much cleaner support for.
But in the second place, checking write_failed here seems like the
wrong thing anyway. The idea of the write_failed mechanism is to
postpone handling of a write failure until we've read all we can from
the server; so that flag should not interfere with input-processing
behavior. (Compare 7247e243a.) What we *should* check for is
status = CONNECTION_BAD, ie, socket already closed. (Most places that
close the socket don't touch asyncStatus, but they do reset status.)
This primarily ensures that if PQisBusy() returns true then there is
an open socket, which is assumed by several call sites in our own
code, and probably other applications too.
While at it, fix a nearby thinko in libpq's my_sock_write: we should
only consult errno for res < 0, not res == 0. This is harmless since
pqsecure_raw_write would force errno to zero in such a case, but it
still could confuse readers.
Noted by Andres Freund. Backpatch to v12 where 1f39a1c06 came in.
Discussion: https://postgr.es/m/20220211011025.ek7exh6owpzjyudn@alap3.anarazel.de
createplan.c tries to save a runtime projection step by specifying
a scan plan node's output as being exactly the table's columns, or
index's columns in the case of an index-only scan, if there is not a
reason to do otherwise. This logic did not previously pay attention
to whether an index's columns are returnable. That worked, sort of
accidentally, until commit 9a3ddeb51 taught setrefs.c to reject plans
that try to read a non-returnable column. I have no desire to loosen
setrefs.c's new check, so instead adjust use_physical_tlist() to not
try to optimize this way when there are non-returnable column(s).
Per report from Ryan Kelly. Like the previous patch, back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAHUie24ddN+pDNw7fkhNrjrwAX=fXXfGZZEHhRuofV_N_ftaSg@mail.gmail.com
"pg_ctl stop/restart" checked that the postmaster PID is valid just
once, as a side-effect of sending the stop signal, and then would
wait-till-timeout for the postmaster.pid file to go away. This
neglects the case wherein the postmaster dies uncleanly after we
signal it. Similarly, once "pg_ctl promote" has sent the signal,
it'd wait for the corresponding on-disk state change to occur
even if the postmaster dies.
I'm not sure how we've managed not to notice this problem, but it
seems to explain slow execution of the 017_shm.pl test script on AIX
since commit 4fdbf9af5, which added a speculative "pg_ctl stop" with
the idea of making real sure that the postmaster isn't there. In the
test steps that kill-9 and then restart the postmaster, it's possible
to get past the initial signal attempt before kill() stops working
for the doomed postmaster. If that happens, pg_ctl waited till
PGCTLTIMEOUT before giving up ... and the buildfarm's AIX members
have that set very high.
To fix, include a "kill(pid, 0)" test (similar to what
postmaster_is_alive uses) in these wait loops, so that we'll
give up immediately if the postmaster PID disappears.
While here, I chose to refactor those loops out of where they were.
do_stop() and do_restart() can perfectly well share one copy of the
wait-for-stop loop, and it seems desirable to put a similar function
beside that for wait-for-promote.
Back-patch to all supported versions, since pg_ctl's wait logic
is substantially identical in all, and we're seeing the slow test
behavior in all branches.
Discussion: https://postgr.es/m/20220210023537.GA3222837@rfd.leadboat.com
Commit 09cf1d522 taught schedule_alarm() to not do anything if
the next requested event is after when we expect the next interrupt
to fire. However, if somehow an interrupt gets lost, we'll continue
to not do anything indefinitely, even after the "next interrupt" time
is obviously in the past. Thus, one missed interrupt can break
timeout scheduling for the life of the session. Michael Harris
reported a scenario where a bug in a user-defined function caused this
to happen, so you don't even need to assume kernel bugs exist to think
this is worth fixing. We can make things more robust at little cost
by detecting the case where signal_due_at is before "now" and forcing
a new setitimer call to occur. This isn't a completely bulletproof
fix of course; but in our typical usage pattern where we frequently set
timeouts and clear them before they are reached, the interrupt will
get re-enabled after at most one timeout interval, which with a little
luck will be before we really need it.
While here, let's mark signal_due_at as volatile, since the signal
handler can both examine and set it. I'm not sure there's any
actual risk given that signal_pending is already volatile, but
it's surely questionable.
Backpatch to v14 where this logic came in.
Michael Harris and Tom Lane
Discussion: https://postgr.es/m/CADofcAWbMrvgwSMqO4iG_iD3E2v8ZUrC-_crB41my=VMM02-CA@mail.gmail.com
The connection strings in the SSL client tests were using the host
set up from Cluster.pm which is a temporary pathname. When SNI is
enabled we pass the host to OpenSSL in order to set the server name
indication ClientHello extension via SSL_set_tlsext_host_name.
OpenSSL doesn't validate the hostname apart from checking the max
length, but LibreSSL checks for RFC 5890 conformance which results
in errors during testing as the pathname from Cluster.pm is not a
valid hostname.
Fix by setting the host explicitly to localhost, as that's closer
to the intent of the test.
Backpatch through 14 where SNI support came in.
Reported-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/17391-304f81bcf724b58b@postgresql.org
Backpatch-through: 14
Commit 6a2a70a02 supposed that any platform having <sys/epoll.h>
would also have <sys/signalfd.h>. It turns out there are still a
few people using platforms where that's not so, so we'd better make
a separate configure probe for it. But since it took this long to
notice, I'm content with the decision to not have a separate code
path for epoll-only machines; we'll just fall back to using poll()
for these stragglers.
Per gripe from Gabriela Serventi. Back-patch to v14 where this
code came in.
Discussion: https://postgr.es/m/CAHOHWE-JjJDfcYuLAAEO7Jk07atFAU47z8TzHzg71gbC0aMy=g@mail.gmail.com
Recent versions of Devel::PPPort try to redefine eval_pv() to
dodge a bug in pre-5.31 Perl versions. Unfortunately the redefinition
fails on compilers that don't support statements nested within
expressions. However, we aren't actually interested in this bug fix,
since we always call eval_pv() with croak_on_error = FALSE.
So, until there's an upstream fix for this breakage, just comment
out the macro to revert to the older behavior.
Per report from Wei Sun, as well as previous buildfarm failure
on pademelon (which I'd unfortunately not looked at carefully
enough to understand the cause). Back-patch to all supported
versions, since we're using the same ppport.h in all.
Discussion: https://postgr.es/m/tencent_2EFCC8BA0107B6EC0F97179E019A8A43C806@qq.com
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=pademelon&dt=2022-02-02%2001%3A22%3A58
There are two Asserts in nodeMergejoin.c that are reachable if
the input data is not in the expected order. This seems way too
fragile. Alexander Lakhin reported a case where the assertions
could be triggered with misconfigured foreign-table partitions,
and bitter experience with unstable operating system collation
definitions suggests another easy route to hitting them. Neither
Assert is in a place where we can't afford one more test-and-branch,
so replace 'em with plain test-and-elog logic.
Per bug #17395. While the reported symptom is relatively recent,
collation changes could happen anytime, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/17395-8c326292078d1a57@postgresql.org
We assume that direct-modify ForeignScan nodes cannot be re-evaluated
during EvalPlanQual processing, but the rework for inherited
UPDATE/DELETE in commit 86dc90056 changed things, without considering
that, so that such ForeignScan nodes get called as part of the
EvalPlanQual subtree during EvalPlanQual processing in the case of an
inherited UPDATE/DELETE where the inheritance set contains foreign
target relations. To avoid re-evaluating such ForeignScan nodes during
EvalPlanQual processing, commit c3928b467 modified nodeForeignscan.c,
but the assumption made there that ExecForeignScan() should never be
called for such ForeignScan nodes during EvalPlanQual processing turned
out to be wrong in some cases, leading to a segmentation fault or a
"cannot re-evaluate a Foreign Update or Delete during EvalPlanQual"
error.
Fix by modifying nodeForeignscan.c further to avoid re-evaluating such
ForeignScan nodes even in ExecForeignScan()/ExecReScanForeignScan()
during EvalPlanQual processing. Since this makes non-reachable the
test-and-elog added to ForeignNext() by commit c3928b467 that produced
the aforesaid error, convert the test-and-elog to an Assert.
Per bug #17355 from Alexander Lakhin. Back-patch to v14 where both
commits came in.
Patch by me, reviewed and tested by Alexander Lakhin and Amit Langote.
Discussion: https://postgr.es/m/17355-de8e362eb7001a96@postgresql.org
ppport.h was only updated in 05798c9f7f (master). Unfortunately my commit
c89f409749 uses PERL_VERSION_LT which came in with that update. Breaking most
buildfarm animals.
I should have noticed that...
We might want to backpatch the ppport update instead, but for now lets get the
buildfarm green again.
Discussion: https://postgr.es/m/20220131015130.shn6wr2fzuymerf6@alap3.anarazel.de
Backpatch: 10-14, master doesn't need it
For older versions we need our own copy of perl's setlocale(), because it was
not exposed (why we need the setlocale in the first place is explained in
plperl_init_interp) . The copy stopped working in 5.28, as some of the used
macros are not public anymore. But Perl_setlocale is available in 5.28, so
use that.
Author: Victor Wagner <vitus@wagner.pp.ru>
Reviewed-By: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/20200501134711.08750c5f@antares.wagner.home
Backpatch: all versions
Although select_common_type() has a failure-return convention, an
apparent successful return just provides a type OID that *might* work
as a common supertype; we've not validated that the required casts
actually exist. In the mainstream use-cases that doesn't matter,
because we'll proceed to invoke coerce_to_common_type() on each input,
which will fail appropriately if the proposed common type doesn't
actually work. However, a few callers didn't read the (nonexistent)
fine print, and thought that if they got back a nonzero OID then the
coercions were sure to work.
This affects in particular the recently-added "anycompatible"
polymorphic types; we might think that a function/operator using
such types matches cases it really doesn't. A likely end result
of that is unexpected "ambiguous operator" errors, as for example
in bug #17387 from James Inform. Another, much older, case is that
the parser might try to transform an "x IN (list)" construct to
a ScalarArrayOpExpr even when the list elements don't actually have
a common supertype.
It doesn't seem desirable to add more checking to select_common_type
itself, as that'd just slow down the mainstream use-cases. Instead,
write a separate function verify_common_type that performs the
missing checks, and add a call to that where necessary. Likewise add
verify_common_type_from_oids to go with select_common_type_from_oids.
Back-patch to v13 where the "anycompatible" types came in. (The
symptom complained of in bug #17387 doesn't appear till v14, but
that's just because we didn't get around to converting || to use
anycompatible till then.) In principle the "x IN (list)" fix could
go back all the way, but I'm not currently convinced that it makes
much difference in real-world cases, so I won't bother for now.
Discussion: https://postgr.es/m/17387-5dfe54b988444963@postgresql.org
c532d15 has split the logic of COPY commands into multiple files, one
change being to move the internals of BeginCopy() to BeginCopyTo().
Originally the code was written so as we'd switch back-and-forth between
the current execution memory context and the dedicated memory context
for the COPY command, and this refactoring has introduced an extra
switch to the current memory context from the COPY context once
BeginCopyTo() is done with the past logic coming from BeginCopy().
The code was correctly doing the analyze, rewrite and planning phases in
the COPY context, but it was not assigning "copy_file" (FILE* used when
copying to a source file) and "filename" in the COPY context, making the
COPY status data inconsistent.
Author: Bharath Rupireddy
Reviewed-by: Japin Li
Discussion: https://postgr.es/m/CALj2ACWvVa69foi9jhHFY=2BuHxAoYboyE+vXQTARwxZcJnVrQ@mail.gmail.com
Backpatch-through: 14
When pg_log_backend_memory_contexts() is executed, the target backend
should use LOG_SERVER_ONLY to log its memory contexts, to prevent them
from being sent to its connected client regardless of client_min_messages.
But previously the backend unexpectedly used LOG to log the message
"logging memory contexts of PID %d" and it could be sent to the client.
This is a bug in memory context logging.
To fix the bug, this commit changes that message so that it's logged with
LOG_SERVER_ONLY.
Back-patch to v14 where pg_log_backend_memory_contexts() was added.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Atsushi Torikoshi
Discussion: https://postgr.es/m/82c12f36-86f7-5e72-79af-7f5c37f6cad7@oss.nttdata.com
Commit 8431e296ea reworked ProcArrayApplyRecoveryInfo to sort XIDs
before adding them to KnownAssignedXids. But the XIDs are sorted using
xidComparator, which compares the XIDs simply as uint32 values, not
logically. KnownAssignedXidsAdd() however expects XIDs in logical order,
and calls TransactionIdFollowsOrEquals() to enforce that. If there are
XIDs for which the two orderings disagree, an error is raised and the
recovery fails/restarts.
Hitting this issue is fairly easy - you just need two transactions, one
started before the 4B limit (e.g. XID 4294967290), the other sometime
after it (e.g. XID 1000). Logically (4294967290 <= 1000) but when
compared using xidComparator we try to add them in the opposite order.
Which makes KnownAssignedXidsAdd() fail with an error like this:
ERROR: out-of-order XID insertion in KnownAssignedXids
This only happens during replica startup, while processing RUNNING_XACTS
records to build the snapshot. Once we reach STANDBY_SNAPSHOT_READY, we
skip these records. So this does not affect already running replicas,
but if you restart (or create) a replica while there are transactions
with XIDs for which the two orderings disagree, you may hit this.
Long-running transactions and frequent replica restarts increase the
likelihood of hitting this issue. Once the replica gets into this state,
it can't be started (even if the old transactions are terminated).
Fixed by sorting the XIDs logically - this is fine because we're dealing
with normal XIDs (because it's XIDs assigned to backends) and from the
same wraparound epoch (otherwise the backends could not be running at
the same time on the primary node). So there are no problems with the
triangle inequality, which is why xidComparator compares raw values.
Investigation and root cause analysis by Abhijit Menon-Sen. Patch by me.
This issue is present in all releases since 9.4, however releases up to
9.6 are EOL already so backpatch to 10 only.
Reviewed-by: Abhijit Menon-Sen
Reviewed-by: Alvaro Herrera
Backpatch-through: 10
Discussion: https://postgr.es/m/36b8a501-5d73-277c-4972-f58a4dce088a%40enterprisedb.com
Perl instances on some msys toolchains (e.g. UCRT64) have their
configured osname set to 'MSWin32' rather than 'msys'. The test for
the msys2 platform is adjusted accordingly.
Backpatch to release 14.
For authentication method cert, clientcert=verify-full is implied. But
the pg_hba_file_rules entry would incorrectly show clientcert=verify-ca.
Per bug #17354
Reported-By: Feike Steenbergen
Reviewed-By: Jonathan Katz
Backpatch-through: 12
This reverts commits 6051857fc and ed52c3707, but only in the back
branches. Further testing has shown that while those changes do fix
some things, they also break others; in particular, it looks like
walreceivers fail to detect walsender-initiated connection close
reliably if the walsender shuts down this way. We'll keep trying to
improve matters in HEAD, but it now seems unwise to push these changes
into stable releases.
Discussion: https://postgr.es/m/CA+hUKG+OeoETZQ=Qw5Ub5h3tmwQhBmDA=nuNO3KG=zWfUypFAw@mail.gmail.com
8edd0e794 added some code to remove Append and MergeAppend nodes when they
contained a single child node. As it turned out, this was unsafe to do
when the Append/MergeAppend was parallel_aware and the child node was not.
Removing the Append/MergeAppend, in this case, could lead to the child plan
being called multiple times by parallel workers when it was unsafe to do
so.
Here we fix this by just not removing the Append/MergeAppend when the
parallel_aware flag of the parent and child node don't match.
Reported-by: Yura Sokolov
Bug: #17335
Discussion: https://postgr.es/m/b59605fecb20ba9ea94e70ab60098c237c870628.camel%40postgrespro.ru
Backpatch-through: 12, where 8edd0e794 was first introduced
In logical replication mode, a WalSender is supposed to be able
to execute any regular SQL command, as well as the special
replication commands. Poor design of the replication-command
parser caused it to fail in various cases, notably:
* semicolons embedded in a command, or multiple SQL commands
sent in a single message;
* dollar-quoted literals containing odd numbers of single
or double quote marks;
* commands starting with a comment.
The basic problem here is that we're trying to run repl_scanner.l
across the entire input string even when it's not a replication
command. Since repl_scanner.l does not understand all of the
token types known to the core lexer, this is doomed to have
failure modes.
We certainly don't want to make repl_scanner.l as big as scan.l,
so instead rejigger stuff so that we only lex the first token of
a non-replication command. That will usually look like an IDENT
to repl_scanner.l, though a comment would end up getting reported
as a '-' or '/' single-character token. If the token is a replication
command keyword, we push it back and proceed normally with repl_gram.y
parsing. Otherwise, we can drop out of exec_replication_command()
without examining the rest of the string.
(It's still theoretically possible for repl_scanner.l to fail on
the first token; but that could only happen if it's an unterminated
single- or double-quoted string, in which case you'd have gotten
largely the same error from the core lexer too.)
In this way, repl_gram.y isn't involved at all in handling general
SQL commands, so we can get rid of the SQLCmd node type. (In
the back branches, we can't remove it because renumbering enum
NodeTag would be an ABI break; so just leave it sit there unused.)
I failed to resist the temptation to clean up some other sloppy
coding in repl_scanner.l while at it. The only externally-visible
behavior change from that is it now accepts \r and \f as whitespace,
same as the core lexer.
Per bug #17379 from Greg Rychlewski. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17379-6a5c6cfb3f1f5e77@postgresql.org
Without this, we get odd behavior when the previous cycle of
lexing exited in a non-default exclusive state. Every other
copy of this code is aware that it has to do BEGIN(INITIAL),
but repl_scanner.l did not get that memo.
The real-world impact of this is probably limited, since most
replication clients would abandon their connection after getting
a syntax error. Still, it's a bug.
This mistake is old, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1874781.1643035952@sss.pgh.pa.us
Commit 6df7a9698 wrote appendPQExpBuffer where it should have
written printfPQExpBuffer. This resulted in re-issuing the
previous query along with the desired one, which very accidentally
had no negative consequences except for some wasted cycles.
Back-patch to v14 where that came in.
Discussion: https://postgr.es/m/1714711.1642962663@sss.pgh.pa.us
In the normal configuration where GEQO_DEBUG isn't defined,
recent clang versions have started to complain that geqo_main.c
accumulates the edge_failures count but never does anything
with it. As a minimal back-patchable fix, insert a void cast
to silence this warning. (I'd speculated about ripping out the
GEQO_DEBUG logic altogether, but I don't think we'd wish to
back-patch that.)
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
an annoying compiler warning but changes no behavior. Hence,
back-patch all the way to 9.2.
Discussion: https://postgr.es/m/CA+hUKGLTSZQwES8VNPmWO9AO0wSeLt36OCPDAZTccT1h7Q7kTQ@mail.gmail.com
In sort_inner_and_outer we iterate a list of PathKey elements, but the
variable is declared as (List *). This mistake is benign, because we
only pass the pointer to lcons() and never dereference it.
This exists since ~2004, but it's confusing. So fix and backpatch to all
supported branches.
Backpatch-through: 10
Discussion: https://postgr.es/m/bf3a6ea1-a7d8-7211-0669-189d5c169374%40enterprisedb.com
The syscache lookup may return NULL even for valid OID, for example due
to a concurrent DROP STATISTICS, so a HeapTupleIsValid is necessary.
Without it, it may fail with a segfault.
Reported by Alexander Lakhin, patch by me. Backpatch to 13, where ALTER
STATISTICS ... SET STATISTICS was introduced.
Backpatch-through: 13
Discussion: https://postgr.es/m/17372-bf3b6e947e35ae77%40postgresql.org
Previously, unless we had to add a NOT NULL constraint to the column,
this command resulted in updating only the index's relcache entry.
That's problematic when replication behavior is being driven off the
existence of a primary key: other sessions (and ours too for that
matter) failed to recalculate their opinion of whether the table can
be replicated. Add a relcache invalidation to fix it.
This has been broken since pg_class.relhaspkey was removed in v11.
Before that, updating the table's relhaspkey value sufficed to cause
a cache flush. Hence, backpatch to v11.
Report and patch by Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716EBE01F112C62F8F9B786947B9@OS0PR01MB5716.jpnprd01.prod.outlook.com
In libpq and ecpglib, multiple threads can concurrently enter the
initialization logic for message localization. Since we set the
its-done flag before actually doing the work, it'd be possible
for some threads to reach gettext() before anyone has called
bindtextdomain(). Barring bugs in libintl itself, this would not
result in anything worse than failure to localize some early
messages. Nonetheless, it's a bug, and an easy one to fix.
Noted while investigating bug #17299 from Clemens Zeidler
(much thanks to Liam Bowen for followup investigation on that).
It currently appears that that actually *is* a bug in libintl itself,
but that doesn't let us off the hook for this bit.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/17299-7270741958c0b1ab@postgresql.org
Discussion: https://postgr.es/m/CAE7q7Eit4Eq2=bxce=Fm8HAStECjaXUE=WBQc-sDDcgJQ7s7eg@mail.gmail.com
While individual logical rewrite files were synced to disk, the directory was
not. On some filesystems that could lead to loosing directory entries after a
crash.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/867F2E29-2782-4869-970E-B984C6D35A8F@amazon.com
Backpatch: 10-
The logic in charge of writing commit timestamps (enabled with
track_commit_timestamp) for subtransactions had a one-bug bug,
where it would be possible that commit timestamps go missing for the
last subtransaction committed.
While on it, simplify a bit the iteration logic in the loop writing the
commit timestamps, as per suggestions from Kyotaro Horiguchi and Tom
Lane, so as some variable initializations are not part of the loop
itself.
Issue introduced in 73c986a.
Analyzed-by: Alex Kingsborough
Author: Alex Kingsborough, Kyotaro Horiguchi
Discussion: https://postgr.es/m/73A66172-4050-4F2A-B7F1-13508EDA2144@amazon.com
Backpatch-through: 10
Commits 6c4a8903b et al. had a couple of deficiencies:
* The logic I added to Cluster::start to see if a PID file is present
could be fooled by a stale PID file left over from a previous
postmaster. To fix, if we're not sure whether we expect to find a
running postmaster or not, validate the PID using "kill 0".
* 017_shm.pl has a loop in which it just issues repeated Cluster::start
calls; this will fail if some invocation fails but leaves self->_pid
set. Per buildfarm results, the above fix is not enough to make this
safe: we might have "validated" a PID for a postmaster that exits
immediately after we look. Hence, match each failed start call with
a stop call that will get us back to the self->_pid == undef state.
Add a fail_ok option to Cluster::stop to make this work.
Discussion: https://postgr.es/m/CA+hUKGKV6fOHvfiPt8=dOKzvswjAyLoFoJF1iQXMNpi7+hD1JQ@mail.gmail.com
Since the test requires reproducible behavior from VACUUM, and since
DISABLE_PAGE_SKIPPING doesn't actually disable all forms of page
skipping, let's use a temporary table to avoid contention.
Back-patch to 12, like commit 3414099c.
Discussion: https://postgr.es/m/20220120052404.sonrhq3f3qgplpzj%40alap3.anarazel.de
"pg_ctl start" might start a new postmaster and then return failure
anyway, for example if PGCTLTIMEOUT is exceeded. If there is a
postmaster there, it's still incumbent on us to shut it down at
script end, so check for the PID file even though we are about
to fail.
This has been broken all along, so back-patch to all supported branches.
Discussion: https://postgr.es/m/647439.1642622744@sss.pgh.pa.us
Where we test vacuum_truncate's effects, sometimes this is failing to
truncate as expected on the build farm. That could be explained by page
skipping, so disable it explicitly, with the theory that commit fe246d1c
didn't go far enough.
Back-patch to 12, where the vacuum_truncate tests were added.
Discussion: https://postgr.es/m/CA%2BhUKGLT2UL5_JhmBzUgkdyKfc%3D5J-gJSQJLysMs4rqLUKLAzw%40mail.gmail.com
The original coding (from c33869cc3) failed with "more than one row
returned by a subquery used as an expression" if there were unrelated
triggers of the same tgname on parent partitioned tables. (That's
possible because statement-level triggers don't get inherited.) Fix
by applying LIMIT 1 after sorting the candidates by inheritance level.
Also, wrap the subquery in a CASE so that we don't have to execute it at
all when the trigger is visibly non-inherited. Aside from saving some
cycles, this avoids the need for a confusing and undocumented NULLIF().
While here, tweak the format of the emitted query to look a bit
nicer for "psql -E", and add some explanation of this subquery,
because it badly needs it.
Report and patch by Justin Pryzby (with some editing by me).
Back-patch to v13 where the faulty code came in.
Discussion: https://postgr.es/m/20211217154356.GJ17618@telsasoft.com
It seems highly unlikely that gettext() can be relied on to be
async-signal-safe. psql used to understand that, but someone got
it wrong long ago in the src/bin/scripts/ version of handle_sigint,
and then the bad idea was perpetuated when those two versions were
unified into src/fe_utils/cancel.c.
I'm unsure why there have not been field complaints about this
... maybe gettext() is signal-safe once it's translated at least
one message? But we have no business assuming any such thing.
In cancel.c (v13 and up), I preserved our ability to localize
"Cancel request sent" messages by invoking gettext() before
the signal handler is set up. In earlier branches I just made
src/bin/scripts/ not localize those messages, as psql did then.
(Just for extra unsafety, the src/bin/scripts/ version was
invoking fprintf() from a signal handler. Sigh.)
Noted while fixing signal-safety issues in PQcancel() itself.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
PQcancel() is supposed to be safe to call from a signal handler,
and indeed psql uses it that way. All of the library functions
it uses are specified to be async-signal-safe by POSIX ...
except for strerror. Neither plain strerror nor strerror_r
are considered safe. When this code was written, back in the
dark ages, we probably figured "oh, strerror will just index
into a constant array of strings" ... but in any locale except C,
that's unlikely to be true. Probably the reason we've not heard
complaints is that (a) this error-handling code is unlikely to be
reached in normal use, and (b) in many scenarios, localized error
strings would already have been loaded, after which maybe it's
safe to call strerror here. Still, this is clearly unacceptable.
The best we can do without relying on strerror is to print the
decimal value of errno, so make it do that instead. (This is
probably not much loss of user-friendliness, given that it is
hard to get a failure here.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
The need for this was foreseen long ago, but when record_eq
actually became hashable (in commit 01e658fa7), we missed updating
this spot.
Per bug #17363 from Elvis Pranskevichus. Back-patch to v14 where
the faulty commit came in.
Discussion: https://postgr.es/m/17363-f6d42fd0d726be02@postgresql.org
Since enum labels have to be single-quoted, this part of the
tab completion machinery got side-swiped by commit cd69ec66c.
A side-effect of that commit is that (at least with some versions
of Readline) the text string passed for completion will omit the
leading quote mark of the enum label literal. Libedit still acts
the same as before, though, so adapt COMPLETE_WITH_ENUM_VALUE so
that it can cope with either convention.
Also, when we fail to find any valid completion, set
rl_completion_suppress_quote = 1. Otherwise readline will
go ahead and append a closing quote, which is unwanted.
Per report from Peter Eisentraut. Back-patch to v13 where
cd69ec66c came in.
Discussion: https://postgr.es/m/8ca82d89-ec3d-8b28-8291-500efaf23b25@enterprisedb.com
Commit 859b3003de disabled building of extended stats for inheritance
trees, to prevent updating the same catalog row twice. While that
resolved the issue, it also means there are no extended stats for
declaratively partitioned tables, because there are no data in the
non-leaf relations.
That also means declaratively partitioned tables were not affected by
the issue 859b3003de addressed, which means this is a regression
affecting queries that calculate estimates for the whole inheritance
tree as a whole (which includes e.g. GROUP BY queries).
But because partitioned tables are empty, we can invert the condition
and build statistics only for the case with inheritance, without losing
anything. And we can consider them when calculating estimates.
It may be necessary to run ANALYZE on partitioned tables, to collect
proper statistics. For declarative partitioning there should no prior
statistics, and it might take time before autoanalyze is triggered. For
tables partitioned by inheritance the statistics may include data from
child relations (if built 859b3003de), contradicting the current code.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since commit 859b3003de we only build extended statistics for individual
relations, ignoring the child relations. This resolved the issue with
updating catalog tuple twice, but we still tried to use the statistics
when calculating estimates for the whole inheritance tree. When the
relations contain very distinct data, it may produce bogus estimates.
This is roughly the same issue 427c6b5b9 addressed ~15 years ago, and we
fix it the same way - by ignoring extended statistics when calculating
estimates for the inheritance tree as a whole. We still consider
extended statistics when calculating estimates for individual child
relations, of course.
This may result in plan changes due to different estimates, but if the
old statistics were not describing the inheritance tree particularly
well it's quite likely the new plans is actually better.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since dc7420c2c9 the horizon used for pruning is determined "lazily". A more
accurate horizon is built on-demand, rather than in GetSnapshotData(). If a
horizon computation is triggered between two HeapTupleSatisfiesVacuum() calls
for the same tuple, the result can change from RECENTLY_DEAD to DEAD.
heap_page_prune() can process the same tid multiple times (once following an
update chain, once "directly"). When the result of HeapTupleSatisfiesVacuum()
of a tuple changes from RECENTLY_DEAD during the first access, to DEAD in the
second, the "tuple is DEAD and doesn't chain to anything else" path in
heap_prune_chain() can end up marking the target of a LP_REDIRECT ItemId
unused.
Initially not easily visible,
Once the target of a LP_REDIRECT ItemId is marked unused, a new tuple version
can reuse it. At that point the corruption may become visible, as index
entries pointing to the "original" redirect item, now point to a unrelated
tuple.
To fix, compute HTSV for all tuples on a page only once. This fixes the entire
class of problems of HTSV changing inside heap_page_prune(). However,
visibility changes can obviously still occur between HTSV checks inside
heap_page_prune() and outside (e.g. in lazy_scan_prune()).
The computation of HTSV is now done in bulk, in heap_page_prune(), rather than
on-demand in heap_prune_chain(). Besides being a bit simpler, it also is
faster: Memory accesses can happen sequentially, rather than in the order of
HOT chains.
There are other causes of HeapTupleSatisfiesVacuum() results changing between
two visibility checks for the same tuple, even before dc7420c2c9. E.g.
HEAPTUPLE_INSERT_IN_PROGRESS can change to HEAPTUPLE_DEAD when a transaction
aborts between the two checks. None of the these other visibility status
changes are known to cause corruption, but heap_page_prune()'s approach makes
it hard to be confident.
A patch implementing a more fundamental redesign of heap_page_prune(), which
fixes this bug and simplifies pruning substantially, has been proposed by
Peter Geoghegan in
https://postgr.es/m/CAH2-WzmNk6V6tqzuuabxoxM8HJRaWU6h12toaS-bqYcLiht16A@mail.gmail.com
However, that redesign is larger change than desirable for backpatching. As
the new design still benefits from the batched visibility determination
introduced in this commit, it makes sense to commit this narrower fix to 14
and master, and then commit Peter's improvement in master.
The precise sequence required to trigger the bug is complicated and hard to do
exercise in an isolation test (until we have wait points). Due to that the
isolation test initially posted at
https://postgr.es/m/20211119003623.d3jusiytzjqwb62p%40alap3.anarazel.de
and updated in
https://postgr.es/m/20211122175914.ayk6gg6nvdwuhrzb%40alap3.anarazel.de
isn't committable.
A followup commit will introduce additional assertions, to detect problems
like this more easily.
Bug: #17255
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Debugged-By: Andres Freund <andres@anarazel.de>
Debugged-By: Peter Geoghegan <pg@bowt.ie>
Author: Andres Freund <andres@andres@anarazel.de>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/20211122175914.ayk6gg6nvdwuhrzb@alap3.anarazel.de
Backpatch: 14-, the oldest branch containing dc7420c2c9
This reverts commits ab27df2, af8d530 and 3a0cced, that introduced
pg_cryptohash_error(). In order to make the core code able to pass down
the new error types that this introduced, some of the MD5-related
routines had to be reworked, causing an ABI breakage, but we found that
some external extensions rely on them. Maintaining compatibility
outweights the error report benefits, so just revert the change in v14.
Reported-by: Laurenz Albe
Discussion: https://postgr.es/m/9f0c0a96d28cf14fc87296bbe67061c14eb53ae8.camel@cybertec.at
Commit 7745bc352 intended to ensure that whole-row Vars would be
printed with "::type" decoration in all contexts where plain
"var.*" notation would result in star-expansion, notably in
ROW() and VALUES() constructs. However, it missed the case of
INSERT with a single-row VALUES, as reported by Timur Khanjanov.
Nosing around ruleutils.c, I found a second oversight: the
code for RowCompareExpr generates ROW() notation without benefit
of an actual RowExpr, and naturally it wasn't in sync :-(.
(The code for FieldStore also does this, but we don't expect that
to generate strictly parsable SQL anyway, so I left it alone.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/efaba6f9-4190-56be-8ff2-7a1674f9194f@intrans.baku.az
Commit 9dc718bd added a "logically unchanged by UPDATE" hinting
mechanism, which is currently used within nbtree indexes only (see
commit d168b666). This mechanism determined whether or not the incoming
item is a logically unchanged duplicate (a duplicate needed only for
MVCC versioning purposes) once per row updated per non-HOT update. This
approach led to memory leaks which were noticeable with an UPDATE
statement that updated sufficiently many rows, at least on tables that
happen to have an expression index.
On HEAD, fix the issue by adding a cache to the executor's per-index
IndexInfo struct.
Take a different approach on Postgres 14 to avoid an ABI break: simply
pass down the hint to all indexes unconditionally with non-HOT UPDATEs.
This is deemed acceptable because the hint is currently interpreted
within btinsert() as "perform a bottom-up index deletion pass if and
when the only alternative is splitting the leaf page -- prefer to delete
any LP_DEAD-set items first". nbtree must always treat the hint as a
noisy signal about what might work, as a strategy of last resort, with
costs imposed on non-HOT updaters. (The same thing might not be true
within another index AM that applies the hint, which is why the original
behavior is preserved on HEAD.)
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Klaudie Willis <Klaudie.Willis@protonmail.com>
Diagnosed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/261065.1639497535@sss.pgh.pa.us
Backpatch: 14-, where the hinting mechanism was added.
Experimenting with FIPS mode enabled, I saw
regression=# \password joe
Enter new password for user "joe":
Enter it again:
could not encrypt password: disabled for FIPS
out of memory
because PQencryptPasswordConn was still of the opinion that "out of
memory" is always appropriate to print.
Minor oversight in b69aba745. Like that one, back-patch to v14.
The existing cryptohash facility was causing problems in some code paths
related to MD5 (frontend and backend) that relied on the fact that the
only type of error that could happen would be an OOM, as the MD5
implementation used in PostgreSQL ~13 (the in-core implementation is
used when compiling with or without OpenSSL in those older versions),
could fail only under this circumstance.
The new cryptohash facilities can fail for reasons other than OOMs, like
attempting MD5 when FIPS is enabled (upstream OpenSSL allows that up to
1.0.2, Fedora and Photon patch OpenSSL 1.1.1 to allow that), so this
would cause incorrect reports to show up.
This commit extends the cryptohash APIs so as callers of those routines
can fetch more context when an error happens, by using a new routine
called pg_cryptohash_error(). The error states are stored within each
implementation's internal context data, so as it is possible to extend
the logic depending on what's suited for an implementation. The default
implementation requires few error states, but OpenSSL could report
various issues depending on its internal state so more is needed in
cryptohash_openssl.c, and the code is shaped so as we are always able to
grab the necessary information.
The core code is changed to adapt to the new error routine, painting
more "const" across the call stack where the static errors are stored,
particularly in authentication code paths on variables that provide
log details. This way, any future changes would warn if attempting to
free these strings. The MD5 authentication code was also a bit blurry
about the handling of "logdetail" (LOG sent to the postmaster), so
improve the comments related that, while on it.
The origin of the problem is 87ae969, that introduced the centralized
cryptohash facility. Extra changes are done for pgcrypto in v14 for the
non-OpenSSL code path to cope with the improvements done by this
commit.
Reported-by: Michael Mühlbeyer
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/89B7F072-5BBE-4C92-903E-D83E865D9367@trivadis.com
Backpatch-through: 14
This addresses some problems in the describe queries used for extended
statistics:
- Two schema qualifications for the text type were missing for \dX.
- The list of extended statistics listed for a table through \d was
ordered based on the object OIDs, but it is more consistent with the
other commands to order by namespace and then by object name.
- A couple of aliases were not used in \d. These are removed.
This is similar to commits 1f092a3 and 07f8a9e.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220107022235.GA14051@telsasoft.com
Backpatch-through: 14
Instead of using a hardcoded or default path to the perl file the .bat
file is a wrapper for, we use a path that means the file is found in
the same directory as the .bat file.
Patch by Anton Voloshin, slightly tweaked by me.
Backpatch to all live branches
Discussion: https://postgr.es/m/2b7a674b-5fb0-d264-75ef-ecc7a31e54f8@postgrespro.ru
We disallow altering a column datatype within a regular table,
if the table's rowtype is used as a column type elsewhere,
because we lack code to go around and rewrite the other tables.
This restriction should apply to partitioned tables as well, but it
was not checked because ATRewriteTables and ATPrepAlterColumnType
were not on the same page about who should do it for which relkinds.
Per bug #17351 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17351-6db1870f3f4f612a@postgresql.org
get_rel_sync_entry(), which is called each time a change needs to be
logically replicated, is a rather hot code path in the WAL sender
sending logical changes. This code path was doing a relcache access on
relkind and relpartition for each logical change, but we only need to
know this information when building or re-building the cached
information for a relation.
Some measurements prove that this is noticeable in perf profiles,
particularly when attempting to replicate changes from relations that
are not published as these cause less overhead in the WAL sender,
delaying further the replication of changes for relations that are
published.
Issue introduced in 83fd453.
Author: Hou Zhijie
Reviewed-by: Kyotaro Horiguchi, Euler Taveira
Discussion: https://postgr.es/m/OS0PR01MB5716E863AA9E591C1F010F7A947D9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Backpatch-through: 13
Under concurrency, it is possible for two sessions to be merrily locking
and releasing a tuple and marking it again as HEAP_XMAX_INVALID all the
while a third session attempts to lock it, miserably fails at it, and
then contemplates life, the universe and everything only to eventually
fail an assertion that said bit is not set. Before SKIP LOCKED that was
indeed a reasonable expectation, but alas! commit df630b0dd5 falsified
it.
This bug is as old as time itself, and even older, if you think time
begins with the oldest supported branch. Therefore, backpatch to all
supported branches.
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Discussion: https://postgr.es/m/CANbhV-FeEwMnN8yuMyss7if1ZKjOKfjcgqB26n8pqu1e=q0ebg@mail.gmail.com
Commit 4ace45677 failed to fix the problem fully, because the
same issue of attempting to fetch a non-returnable index column
can occur when rechecking the indexqual after using a lossy index
operator. Moreover, it broke EXPLAIN for such indexquals (which
indicates a gap in our test cases :-().
Revert the code changes of 4ace45677 in favor of adding a new field
to struct IndexOnlyScan, containing a version of the indexqual that
can be executed against the index-returned tuple without using any
non-returnable columns. (The restrictions imposed by check_index_only
guarantee this is possible, although we may have to recompute indexed
expressions.) Support construction of that during setrefs.c
processing by marking IndexOnlyScan.indextlist entries as resjunk
if they can't be returned, rather than removing them entirely.
(We could alternatively require setrefs.c to look up the IndexOptInfo
again, but abusing resjunk this way seems like a reasonably safe way
to avoid needing to do that.)
This solution isn't great from an API-stability standpoint: if there
are any extensions out there that build IndexOnlyScan structs directly,
they'll be broken in the next minor releases. However, only a very
invasive extension would be likely to do such a thing. There's no
change in the Path representation, so typical planner extensions
shouldn't have a problem.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
If an index has both returnable and non-returnable columns, and one of
the non-returnable columns is an expression using a Var that is in a
returnable column, then a query returning that expression could result
in an index-only scan plan that attempts to read the non-returnable
column, instead of recomputing the expression from the returnable
column as intended.
To fix, redefine the "indextlist" list of an IndexOnlyScan plan node
as containing null Consts in place of any non-returnable columns.
This solves the problem by preventing setrefs.c from falsely matching
to such entries. The executor is happy since it only cares about the
exposed types of the entries, and ruleutils.c doesn't care because a
correct plan won't reference those entries. I considered some other
ways to prevent setrefs.c from doing the wrong thing, but this way
seems good since (a) it allows a very localized fix, (b) it makes
the indextlist structure more compact in many cases, and (c) the
indextlist is now a more faithful representation of what the index AM
will actually produce, viz. nulls for any non-returnable columns.
This is easier to hit since we introduced included columns, but it's
possible to construct failing examples without that, as per the
added regression test. Hence, back-patch to all supported branches.
Per bug #17350 from Louis Jachiet.
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
The reverted commit attempted to fix SQL specification compliance for
the cases which 6aaaa76bb left. This however broke existing behavior
which takes precedence over spec compliance so revert. The introduced
tests are left after the revert since the codepath isn't well covered.
Per bug report 17346. Backpatch down to 14 where it was introduced.
Reported-by: Andrew Bille <andrewbille@gmail.com>
Discussion: https://postgr.es/m/17346-f72b28bd1a341060@postgresql.org
catalog/pg_class.h was stating that REPLICA_IDENTITY_INDEX with a
dropped index is equivalent to REPLICA_IDENTITY_DEFAULT. The code tells
a different story, as it is equivalent to REPLICA_IDENTITY_NOTHING.
The behavior exists since the introduction of replica identities, and
fe7fd4e even added tests for this case but I somewhat forgot to fix this
comment.
While on it, this commit reorganizes the documentation about replica
identities on the ALTER TABLE page, and a note is added about the case
of dropped indexes with REPLICA_IDENTITY_INDEX.
Author: Michael Paquier, Wei Wang
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/OS3PR01MB6275464AD0A681A0793F56879E759@OS3PR01MB6275.jpnprd01.prod.outlook.com
Backpatch-through: 10
One code path related to this flavor of ALTER TABLE was checking that
the relation to detach has to be a normal table or a partitioned table,
which would fail if using the command with a different relation kind.
Views, sequences and materialized views cannot be part of a partition
tree, so these would cause the command to fail anyway, but the assertion
was triggered. Foreign tables can be part of a partition tree, and
again the assertion would have failed. The simplest solution is just to
remove this assertion, so as we get the same failure as the
non-concurrent code path.
While on it, add a regression test in postgres_fdw for the concurrent
partition detach of a foreign table, as per a suggestion from Alexander
Lakhin.
Issue introduced in 71f4c8c.
Reported-by: Alexander Lakhin
Author: Michael Paquier, Alexander Lakhin
Reviewed-by: Peter Eisentraut, Kyotaro Horiguchi
Discussion: https://postgr.es/m/17339-a9e09aaf38a3457a@postgresql.org
Backpatch-through: 14
Fix the code changed by commit 5c056b0c2 so that we always generate
RelabelType, not something else, for a cast to unspecified typmod.
Otherwise planner optimizations might not happen.
It appears we missed this point because the previous experiments were
done on type numeric: the parser undesirably generates a call on the
numeric() length-coercion function, but then numeric_support()
optimizes that down to a RelabelType, so that everything seems fine.
It misbehaves for types that have a non-optimized length coercion
function, such as bpchar.
Per report from John Naylor. Back-patch to all supported branches,
as the previous patch eventually was. Unfortunately, that no longer
includes 9.6 ... we really shouldn't put this type of change into a
nearly-EOL branch.
Discussion: https://postgr.es/m/CAFBsxsEfbFHEkouc+FSj+3K1sHipLPbEC67L0SAe-9-da8QtYg@mail.gmail.com
edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
This could only matter if (a) long is wider than int, and (b) the heap
of free blocks exceeds UINT_MAX entries, which seems pretty unlikely.
Still, it's a theoretical bug, so backpatch to v13 where the typo came
in (in commit c02fdc922).
In passing, also make swap_nodes() use consistent datatypes.
Ma Liangzhu
Discussion: https://postgr.es/m/17336-fc4e522d26a750fd@postgresql.org
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
When writing / debugging an isolation test it sometimes is useful to see which
session holds what lock etc. To make it easier, both as part of spec files and
interactively, append the session name to application_name. Since b1907d688
application_name already contains the test name, this appends the session's
name to that.
insert-conflict-specconflict did something like this manually, which can now
be removed.
As we have done lately with other test infrastructure improvements, backpatch
this change, to make it easier to backpatch tests.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Michael Paquier <michael@paquier.xyz>
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20211211012052.2blmzcmxnxqawd2z@alap3.anarazel.de
Backpatch: 10-, to make backpatching of tests easier.
The multirange_get_range() function fails when two boundaries of the same
range have different alignments. Fix that by adding proper pointer alignment.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/17300-dced2d01ddeb1f2f%40postgresql.org
Backpatch-through: 14
We publish the child table's data twice for a publication that has both
child and parent tables and is published with publish_via_partition_root
as true. This happens because subscribers will initiate synchronization
using both parent and child tables, since it gets both as separate tables
in the initial table list.
Ensure that pg_publication_tables returns only parent tables in such
cases.
Author: Hou Zhijie
Reviewed-by: Greg Nancarrow, Amit Langote, Vignesh C, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
REINDEX CONCURRENTLY run on a toast index or a toast relation could
corrupt the target indexes rebuilt, as a backend running in parallel
that manipulates toast values would directly release the lock on the
toast relation when its local operation is done, rather than releasing
the lock once the transaction that manipulated the toast values
committed.
The fix done here is simple: we now hold a ROW EXCLUSIVE lock on the
toast relation when saving or deleting a toast value until the
transaction working on them is committed, so as a concurrent reindex
happening in parallel would be able to wait for any activity and see any
new rows inserted (or deleted).
An isolation test is added to check after the case fixed here, which is
a bit fancy by design as it relies on allow_system_table_mods to rename
the toast table and its index to fixed names. This way, it is possible
to reindex them directly without any dependency on the OID of the
underlying relation. Note that this could not use a DO block either, as
REINDEX CONCURRENTLY cannot be run in a transaction block. The test is
backpatched down to 13, where it is possible, thanks to c4a7a39, to use
allow_system_table_mods in a test suite.
Reported-by: Alexey Ermakov
Analyzed-by: Andres Freund, Noah Misch
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/17268-d2fb426e0895abd4@postgresql.org
Backpatch-through: 12
Certain settings from configuration or the Makefile infrastructure are
used by the TAP tests, but were not being set up by vcregress.pl. This
remedies those omissions. This should increase test coverage, especially
on the buildfarm.
Reviewed by Noah Misch
Discussion: https://postgr.es/m/17093da5-e40d-8335-d53a-2bd803fc38b0@dunslane.net
Backpatch to all live branches.
Further experimentation shows that commit 6051857fc is not sufficient
when using (some versions of?) OpenSSL. The reason is obscure, but
calling shutdown(socket, SD_SEND) improves matters.
Per testing by Andrew Dunstan and Alexander Lakhin.
Back-patch as before.
Discussion: https://postgr.es/m/af5e0bf3-6a61-bb97-6cba-061ddf22ff6b@dunslane.net
It turns out that this is necessary to keep Winsock from dropping any
not-yet-sent data, such as an error message explaining the reason for
process termination. It's pretty weird that the implicit close done
by the kernel acts differently from an explicit close, but it's hard
to argue with experimental results.
Independently submitted by Alexander Lakhin and Lars Kanis (comments
by me, though). Back-patch to all supported branches.
Discussion: https://postgr.es/m/90b34057-4176-7bb0-0dbb-9822a5f6425b@greiz-reinsdorf.de
Discussion: https://postgr.es/m/16678-253e48d34dc0c376@postgresql.org
The existing pg_upgrade/test.sh and the buildfarm code have been holding
the same set of SQL queries when doing cross-version upgrade tests to
adapt the objects created by the regression tests before the upgrade
(mostly, incompatible or non-existing objects need to be dropped from
the origin, perhaps re-created).
This moves all those SQL queries into a new, separate, file with a set
of \if clauses to handle the version checks depending on the old version
of the cluster to-be-upgraded.
The long-term plan is to make the buildfarm code re-use this new SQL
file, so as committers are able to fix any compatibility issues in the
tests of pg_upgrade with a refresh of the core code, without having to
poke at the buildfarm client. Note that this is only able to handle the
main regression test suite, and that nothing is done yet for contrib
modules yet (these have more issues like their database names).
A backpatch down to 10 is done, adapting the version checks as this
script needs to be only backward-compatible, so as it becomes possible
to clean up a maximum amount of code within the buildfarm client.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 10
The various ALTER OWNER routines tend to leak memory in
CurrentMemoryContext. That's not a problem when they're only called
once per command; but in this usage where we might be touching many
objects, it can amount to a serious memory leak. Fix that by running
each call in a short-lived context.
(DROP OWNED BY likely has a similar issue, except that you'll probably
run out of lock table space before noticing. REASSIGN is worth fixing
since for most non-table object types, it won't take any lock.)
Back-patch to all supported branches. Unfortunately, in the back
branches this helps to only a limited extent, since the sinval message
queue bloats quite a lot in this usage before commit 3aafc030a,
consuming memory more or less comparable to what's actually leaked.
Still, it's clearly a leak with a simple fix, so we might as well fix it.
Justin Pryzby, per report from Guillaume Lelarge
Discussion: https://postgr.es/m/CAECtzeW2DAoioEGBRjR=CzHP6TdL=yosGku8qZxfX9hhtrBB0Q@mail.gmail.com
GetFinalPathNameByHandleA() cannot be used in compilation environments
where _WIN32_WINNT < 0x0600, meaning at least Windows XP used by some
buildfarm members under MinGW that Postgres still needs to support.
This was reported as a compilation warning by the buildfarm, but this is
actually worse than the report as the code would have not worked.
Instead, this switches to GetFileInformationByHandle() that is able to
fail for standard streams and succeed for redirected ones, which is what
we are looking for herein the code emulating fstat(). We also know that
it is able to work in all the environments still supported, thanks to
the existing logic of win32stat.c.
Issue introduced by 10260c7, so backpatch down to 14.
Reported-by: Justin Pryzby, via buildfarm member jacana
Author: Michael Paquier
Reviewed-by: Juan José Santamaría Flecha
Discussion: https://postgr.es/m/20211129050122.GK17618@telsasoft.com
Backpatch-through: 14
Surround the contents with a test that the feature is enabled by
configure, to silence header checking tools on systems without GSSAPI
installed.
Backpatch to 12, where the file appeared.
Discussion: https://postgr.es/m/202111161709.u3pbx5lxdimt@alvherre.pgsql
In commit ff9f111bce I mixed up inconsistent definitions of the LSN of
the first record in a page, when the previous record ends exactly at the
page boundary. The correct LSN is adjusted to skip the WAL page header;
I failed to use that when setting XLogReaderState->overwrittenRecPtr,
so at WAL replay time VerifyOverwriteContrecord would refuse to let
replay continue past that record.
Backpatch to 10. 9.6 also contains this bug, but it's no longer being
maintained.
Discussion: https://postgr.es/m/45597.1637694259@sss.pgh.pa.us
Commit 6aaaa76bb added support for the GRANTED BY clause in GRANT and
REVOKE statements, but missed adding support for checking the role in
the REVOKE ROLE case. Fix by checking that the parsed role matches the
CURRENT_ROLE/CURRENT_USER requirement, and also add some tests for it.
Backpatch to v14 where GRANTED BY support was introduced.
Discussion: https://postgr.es/m/B7F6699A-A984-4943-B9BF-CEB84C003527@yesql.se
Backpatch-through: 14
Inluding <compile.h> and <eval.h> has not been necessary since Python
2.4, since they are included via <Python.h>. Morever, <eval.h> is
being removed in Python 3.11. So remove these includes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/84884.1637723223%40sss.pgh.pa.us
Replica identities that depend directly on an index rely on a set of
properties, one of them being that all the columns defined in this index
have to be marked as NOT NULL. There was a hole in the logic with ALTER
TABLE DROP NOT NULL, where it was possible to remove the NOT NULL
property of a column part of an index used as replica identity, so block
it to avoid problems with logical decoding down the road.
The same check was already done columns part of a primary key, so the
fix is straight-forward.
Author: Haiying Tang, Hou Zhijie
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB6113338C102BEE8B2FFC5BD9FB619@OS0PR01MB6113.jpnprd01.prod.outlook.com
Backpatch-through: 10
The emulation of fstat() in win32stat.c caused two issues with the
existing in-core callers, failing on EINVAL when using a stream as
argument:
- psql's \copy would crash when using a stream.
- pg_recvlogical would fail with -f -.
The tests in copyselect.sql from the main test suite covers the first
case, and there is a TAP test for the second case. However, in both
cases, as the standard streams are always redirected, automated tests
did not notice those issues, requiring a terminal on Windows to be
reproducible.
This issue has been introduced in bed9075, and the origin of the problem
is that GetFileInformationByHandle() does not work directly on streams,
so this commit adds an extra code path to emulate and return a set of
stats that match best with the reality. Note that redirected streams
rely on handles that can be queried with GetFileInformationByHandle(),
but we can rely on GetFinalPathNameByHandleA() to detect this case.
Author: Dmitry Koval, Juan José Santamaría Flecha
Discussion: https://postgr.es/m/17288-6b58a91025a8a8a3@postgresql.org
Backpatch-through: 14
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Memoize would always use the hash equality operator for the cache key
types to determine if the current set of parameters were the same as some
previously cached set. Certain types such as floating points where -0.0
and +0.0 differ in their binary representation but are classed as equal by
the hash equality operator may cause problems as unless the join uses the
same operator it's possible that whichever join operator is being used
would be able to distinguish the two values. In which case we may
accidentally return in the incorrect rows out of the cache.
To fix this here we add a binary mode to Memoize to allow it to the
current set of parameters to previously cached values by comparing
bit-by-bit rather than logically using the hash equality operator. This
binary mode is always used for LATERAL joins and it's used for normal
joins when any of the join operators are not hashable.
Reported-by: Tom Lane
Author: David Rowley
Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us
Backpatch-through: 14, where Memoize was added
When a stored expression depends on a user-defined cast, the backend
records the dependency as being on the cast's implementation function
--- or indeed, if there's no cast function involved but just
RelabelType or CoerceViaIO, no dependency is recorded at all. This
is problematic for pg_dump, which is at risk of dumping things in the
wrong order leading to restore failures. Given the lack of previous
reports, the risk isn't that high, but it can be demonstrated if the
cast is used in some view whose rowtype is then used as an input or
result type for some other function. (That results in the view
getting hoisted into the functions portion of the dump, ahead of
the cast.)
A logically bulletproof fix for this would require including the
cast's OID in the parsed form of the expression, whence it could be
extracted by dependency.c, and then the stored dependency would force
pg_dump to do the right thing. Such a change would be fairly invasive,
and certainly not back-patchable. Moreover, since we'd prefer that
an expression using cast syntax be equal() to one doing the same
thing by explicit function call, the cast OID field would have to
have special ignored-by-comparisons semantics, making things messy.
So, let's instead fix this by a very simple hack in pg_dump: change
the object-type priority order so that casts are initially sorted
before functions, immediately after types. This fixes the problem
in a fairly direct way for casts that have no implementation function.
For those that do, the implementation function will be hoisted to just
before the cast by the dependency sorting step, so that we still have
a valid dump order. (I'm not sure that this provides a full guarantee
of no problems; but since it's been like this for many years without
any previous reports, this is probably enough to fix it in practice.)
Per report from Дмитрий Иванов.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPL5KHoGa3uvyKp6z6m48LwCnTsK+LRQ_mcA4uKGfqAVSEjV_A@mail.gmail.com
If a table contains a generated column that's preceded by a dropped
column, dumpTableData_insert failed to account for the dropped
column, and would emit DEFAULT placeholder(s) in the wrong column(s).
This resulted in failures at restore time. The default COPY code path
did not have this bug, likely explaining why it wasn't noticed sooner.
While we're fixing this, we can be a little smarter about the
situation: (1) avoid unnecessarily fetching the values of generated
columns, (2) omit generated columns from the output, too, if we're
using --column-inserts. While these modes aren't expected to be
as high-performance as the COPY path, we might as well be as
efficient as we can; it doesn't add much complexity.
Per report from Дмитрий Иванов.
Back-patch to v12 where generated columns came in.
Discussion: https://postgr.es/m/CAPL5KHrkBniyQt5e1rafm5DdXvbgiiqfEQEJ9GjtVzN71Jj5pA@mail.gmail.com
Previously it was impossible to terminate these programs via control-C
while they were prompting for a password. We can fix that trivially
for their initial password prompts, by moving setup of the SIGINT
handler from just before to just after their initial GetConnection()
calls.
This fix doesn't permit escaping out of later re-prompts, but those
should be exceedingly rare, since the user's password or the server's
authentication setup would have to have changed meanwhile. We
considered applying a fix similar to commit 46d665bc2, but that
seemed more complicated than it'd be worth. Moreover, this way is
back-patchable, which that wasn't.
The misbehavior exists in all supported versions, so back-patch to all.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
Commit ac9099fc1 rearranged the logic in spgGetCache() that determines
the index's attType (nominal input data type) and leafType (actual
type stored in leaf index tuples). Turns out this broke things for
the case where (a) the actual input data type is different from the
nominal type, (b) the opclass's config function leaves leafType
defaulted, and (c) the opclass has no "compress" function. (b) caused
us to assign the actual input data type as leafType, and then since
that's not attType, we complained that a "compress" function is
required. For non-polymorphic opclasses, condition (a) arises in
binary-compatible cases, such as using SP-GiST text_ops for a varchar
column, or using any opclass on a domain over its nominal input type.
To fix, use attType for leafType when the index's declared column type
is different from but binary-compatible with attType. Do this only in
the defaulted-leafType case, to avoid overriding any explicit
selection made by the opclass.
Per bug #17294 from Ilya Anfimov. Back-patch to v14.
Discussion: https://postgr.es/m/17294-8f6c7962ce877edc@postgresql.org
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
This commit adds to the main regression test suite a table with all
the in-core data types (some exceptions apply). This table is not
dropped, so as pg_upgrade would be able to check the binary
compatibility of the types tracked in the table. If a new type is added
in core, this part of the tests would need a refresh but the tests are
designed to fail if that were to happen.
As this is useful for upgrades and that these rely on the objects
created in the regression test suite of the old version upgraded from,
a backpatch down to 12 is done, which is the last point where a binary
incompatible change has been done (7c15cef). This will hopefully be
enough to find out if something gets broken during the development of a
new version of Postgres, so as it is possible to take actions in
pg_upgrade itself in this case (like 0ccfc28 for sql_identifier).
An area that is not covered yet is related to external modules, which
may create their own types. The testing infrastructure of pg_upgrade is
not integrated yet with the external modules stored in core
(src/test/modules/ or contrib/, all use the same database name for their
tests so there would be an overlap). This could be improved in the
future.
Author: Justin Pryzby
Reviewed-by: Jacob Champion, Peter Eisentraut, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
If a SQL-standard function body contains an INSERT ... SELECT statement,
any function parameters referenced within the SELECT were always printed
in $N style, rather than using the parameter name if any. While not
strictly incorrect, this wasn't the intention, and it's inconsistent
with the way that such parameters would be printed in any other kind
of statement.
The cause is that the recursion to get_query_def from
get_insert_query_def neglected to pass down the context->namespaces
list, passing constant NIL instead. This is a very ancient oversight,
but AFAICT it had no visible consequences before commit e717a9a18
added an outermost namespace with function parameters. We don't allow
INSERT ... SELECT as a sub-query, except in a top-level WITH clause,
where it couldn't contain any outer references that might need to access
upper namespaces. So although that's arguably a bug, I don't see any
point in changing it before v14.
In passing, harden the code added to get_parameter by e717a9a18 so that
it won't crash if a PARAM_EXTERN Param appears in an unexpected place.
Per report from Erki Eessaar. Code fix by me, regression test case
by Masahiko Sawada.
Discussion: https://postgr.es/m/AM9PR01MB8268347BED344848555167FAFE949@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
When changing REPLICA IDENTITY INDEX to another one, the target table's
relcache was not being invalidated. This leads to skipping update/delete
operations during apply on the subscriber side as the columns required to
search corresponding rows won't get logged.
Author: Tang Haiying, Hou Zhijie
Reviewed-by: Euler Taveira, Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB61133CA11630DAE45BC6AD95FB939@OS0PR01MB6113.jpnprd01.prod.outlook.com
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
pg_stat_get_slru() in pgstatfuncs.c would point to one element after the
end of the array PgStat_SLRUStats when finishing to scan its entries.
This had no direct consequences as no data from the extra memory area
was read, but static analyzers would rightfully complain here. So let's
be clean.
While on it, this adds one regression test in the area reserved for
system views.
Reported-by: Alexander Kozhemyakin, via AddressSanitizer
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17280-37da556e86032070@postgresql.org
Backpatch-through: 13
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
PostgreSQL 13 and newer versions are directly impacted by that through
the SQL function normalize(), which would cause a call of this function
to write one byte past its allocation if using in input an empty
string after recomposing the string with NFC and NFKC. Older versions
(v10~v12) are not directly affected by this problem as the only code
path using normalization is SASLprep in SCRAM authentication that
forbids the case of an empty string, but let's make the code more robust
anyway there so as any out-of-core callers of this function are covered.
The solution chosen to fix this issue is simple, with the addition of a
fast-exit path if the decomposed string is found as empty. This would
only happen for an empty string as at its lowest level a codepoint would
be decomposed as itself if it has no entry in the decomposition table or
if it has a decomposition size of 0.
Some tests are added to cover this issue in v13~. Note that an empty
string has always been considered as normalized (grammar "IS NF[K]{C,D}
NORMALIZED", through the SQL function is_normalized()) for all the
operations allowed (NFC, NFD, NFKC and NFKD) since this feature has been
introduced as of 2991ac5. This behavior is unchanged but some tests are
added in v13~ to check after that.
I have also checked "make normalization-check" in src/common/unicode/,
while on it (works in 13~, and breaks in older stable branches
independently of this commit).
The release notes should just mention this commit for v13~.
Reported-by: Matthijs van der Vleuten
Discussion: https://postgr.es/m/17277-0c527a373794e802@postgresql.org
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
We've seen intermittent failures in this test on slower buildfarm
machines, which I think can be explained by assuming that autovacuum
emitted some additional WAL. Disable autovacuum to stabilize it.
In passing, use stringwise not numeric comparison to compare
WAL file names. Doesn't matter at present, but they are
hex strings not decimal ...
Discussion: https://postgr.es/m/1372189.1636499287@sss.pgh.pa.us
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
The server collects up to a bufferload of data whenever it reads data
from the client socket. When SSL or GSS encryption is requested
during startup, any additional data received with the initial
request message remained in the buffer, and would be treated as
already-decrypted data once the encryption handshake completed.
Thus, a man-in-the-middle with the ability to inject data into the
TCP connection could stuff some cleartext data into the start of
a supposedly encryption-protected database session.
This could be abused to send faked SQL commands to the server,
although that would only work if the server did not demand any
authentication data. (However, a server relying on SSL certificate
authentication might well not do so.)
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23214
In v14, because we don't have a field in RestrictInfo to cache both the
left and right type's hash equality operator, we just restrict the scope
of Memoize to only when the left and right types of a RestrictInfo are the
same.
In master we add another field to RestrictInfo and cache both hash
equality operators.
Reported-by: Jaime Casanova
Author: David Rowley
Discussion: https://postgr.es/m/20210929185544.GB24346%40ahch-to
Backpatch-through: 14
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
When calculating distance between float4/float8 values, we need to be a
bit more careful about NaN values in order not to trigger assert. We
consider NaN values to be equal (distace 0.0) and in infinite distance
from all other values.
On builds without asserts, this issue is mostly harmless - the ranges
may be merged in less efficient order, but the index is still correct.
Per report from Andreas Seltenreich. Backpatch to 14, where this new
BRIN opclass was introduced.
Reported-by: Andreas Seltenreich
Discussion: https://postgr.es/m/87r1bw9ukm.fsf@credativ.de
When a role being dropped contains is referenced by catalog objects that
are concurrently also being dropped, a crash can result while trying to
construct the string that describes the objects. Suppress that by
ignoring objects whose descriptions are returned as NULL.
The majority of relevant codesites were already cautious about this
already; we had just missed a couple.
This is an old bug, so backpatch all the way back.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17126-21887f04508cb5c8@postgresql.org
If lo_export() fails to open the target file or to write to it, it leaks
the created LargeObjectDesc and its snapshot in the top-transaction
context and resource owner. That's pretty harmless, it's a small leak
after all, but it gives the user a "Snapshot reference leak" warning.
Fix by using a short-lived memory context and no resource owner for
transient LargeObjectDescs that are opened and closed within one function
call. The leak is easiest to reproduce with lo_export() on a directory
that doesn't exist, but in principle the other lo_* functions could also
fail.
Backpatch to all supported versions.
Reported-by: Andrew B
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/32bf767a-2d65-71c4-f170-122f416bab7e@iki.fi
Commit b4af70cb inverted the return value of the function
parallel_processing_is_safe(), but missed the amvacuumcleanup test.
Index AMs that don't support parallel cleanup at all were affected.
The practical consequences of this bug were not very serious. Hash
indexes are affected, but since they just return the number of blocks
during hashvacuumcleanup anyway, it can't have had much impact.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA-Em+aeVPmBbL_s1V-ghsJQSxYL-i3JP8nTfPiD1wjKw@mail.gmail.com
Backpatch: 14-, where commit b4af70cb appears.
Commit b4af70cb, which simplified state managed by VACUUM, performed
refactoring of parallel VACUUM in passing. Confusion about the exact
details of the tasks that the leader process is responsible for led to
code that made it possible for parallel VACUUM to miss a subset of the
table's indexes entirely. Specifically, indexes that fell under the
min_parallel_index_scan_size size cutoff were missed. These indexes are
supposed to be vacuumed by the leader (alongside any parallel unsafe
indexes), but weren't vacuumed at all. Affected indexes could easily
end up with duplicate heap TIDs, once heap TIDs were recycled for new
heap tuples. This had generic symptoms that might be seen with almost
any index corruption involving structural inconsistencies between an
index and its table.
To fix, make sure that the parallel VACUUM leader process performs any
required index vacuuming for indexes that happen to be below the size
cutoff. Also document the design of parallel VACUUM with these
below-size-cutoff indexes.
It's unclear how many users might be affected by this bug. There had to
be at least three indexes on the table to hit the bug: a smaller index,
plus at least two additional indexes that themselves exceed the size
cutoff. Cases with just one additional index would not run into
trouble, since the parallel VACUUM cost model requires two
larger-than-cutoff indexes on the table to apply any parallel
processing. Note also that autovacuum was not affected, since it never
uses parallel processing.
Test case based on tests from a larger patch to test parallel VACUUM by
Masahiko Sawada.
Many thanks to Kamigishi Rei for her invaluable help with tracking this
problem down.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Kamigishi Rei <iijima.yun@koumakan.jp>
Reported-By: Andrew Gierth <andrew@tao11.riddles.org.uk>
Diagnosed-By: Andres Freund <andres@anarazel.de>
Bug: #17245
Discussion: https://postgr.es/m/17245-ddf06aaf85735f36@postgresql.org
Discussion: https://postgr.es/m/20211030023740.qbnsl2xaoh2grq3d@alap3.anarazel.de
Backpatch: 14-, where the refactoring commit appears.
This undoes a mistake in 1ec7679f1: domainval and domainnull were
meant to live across loop iterations, but they were incorrectly
moved inside the loop. The effect was only to emit useless extra
EEOP_MAKE_READONLY steps, so it's not a big deal; nonetheless,
back-patch to v13 where the mistake was introduced.
Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqXuhbkaAp-sGH6dR6Nsq7v28_0TPexHOm6FiDYqwQD-w@mail.gmail.com
As in commits 6301c3ada and e9d9ba2a4, avoid doing repetitive
list_delete_first() operations, since that would be expensive when
there are many files waiting to be unlinked. This is a slightly
larger change than in those cases. We have to keep the list state
valid for calls to AbsorbSyncRequests(), so it's necessary to invent a
"canceled" field instead of immediately deleting PendingUnlinkEntry
entries. Also, because we might not be able to process all the
entries, we need a new list primitive list_delete_first_n().
list_delete_first_n() is almost list_copy_tail(), but it modifies the
input List instead of making a new copy. I found a couple of existing
uses of the latter that could profitably use the new function. (There
might be more, but the other callers look like they probably shouldn't
overwrite the input List.)
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
In the same spirit as 6301c3ada, fix some more places where we were
using list_delete_first() in a loop and thereby risking O(N^2)
behavior. It's not clear that the lists manipulated in these spots
can get long enough to be really problematic ... but it's not clear
that they can't, either, and the fixes are simple enough.
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Failing to do so results in inability of logical decoding to process the
WAL stream. Handle it by doing nothing.
Backpatch all the way back.
Reported-by: Petr Jelínek <petr.jelinek@enterprisedb.com>
The opclass parameter Datums from the old index are fetched in the same
way as for predicates and expressions, by grabbing them directly from
the system catalogs. They are then copied into the new IndexInfo that
will be used for the creation of the new copy.
This caused the new index to be rebuilt with default parameters rather
than the ones pre-defined by a user. The only way to get back a new
index with correct opclass parameters would be to recreate a new index
from scratch.
The issue has been introduced by 911e702.
Author: Michael Paquier
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/YX0CG/QpLXcPr8HJ@paquier.xyz
Backpatch-through: 13
When replaying a transaction that held many exclusive locks on the
primary, a standby server's startup process would expend O(N^2)
effort on manipulating the list of locks. This code was fine when
written, but commit 1cff1b95a made repetitive list_delete_first()
calls inefficient, as explained in its commit message. Fix by just
iterating the list normally, and releasing storage only when done.
(This'd be inadequate if we needed to recover from an error occurring
partway through; but we don't.)
Back-patch to v13 where 1cff1b95a came in.
Nathan Bossart
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Commit d168b66682, which overhauled index deletion, added a
pg_unreachable() to the end of a sort comparator used when sorting heap
TIDs from an index page. This allows the compiler to apply
optimizations that assume that the heap TIDs from the index AM must
always be unique.
That doesn't seem like a good idea now, given recent reports of
corruption involving duplicate TIDs in indexes on Postgres 14. Demote
to an assertion, just in case.
Backpatch: 14-, where index deletion was overhauled.
DST law changes in Fiji, Jordan, Palestine, and Samoa. Historical
corrections for Barbados, Cook Islands, Guyana, Niue, Portugal, and
Tonga.
Also, the Pacific/Enderbury zone has been renamed to Pacific/Kanton.
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Africa/Accra, America/Atikokan,
America/Blanc-Sablon, America/Creston, America/Curacao,
America/Nassau, America/Port_of_Spain, Antarctica/DumontDUrville,
and Antarctica/Syowa.
Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
The previous coding relied on the memory for the slots being zeroed
elsewhere, which while it was true in this case is not an contract
which is guaranteed to hold. Explicitly clear the tts_isnull array
to ensure that the slots are filled from a known state.
Backpatch to v14 where the catalog multi-inserts were introduced.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAJ7c6TP0AowkUgNL6zcAK-s5HYsVHVBRWfu69FRubPpfwZGM9A@mail.gmail.com
Backpatch-through: 14
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
The code does not expect sh_error() to return, but the patch
that made this header usable in frontend didn't get that memo.
While here, plaster unlikely() on the tests that decide whether
to invoke sh_error(), and add our standard copyright notice.
Noted by Andres Freund. Back-patch to v13 where this frontend
support came in.
Discussion: https://postgr.es/m/0D54435C-1199-4361-9D74-2FBDCF8EA164@anarazel.de
Non-global default privilege entries should be dumped as-is,
not made relative to the default ACL for their object type.
This would typically only matter if one had revoked some
on-by-default privileges in a global entry, and then wanted
to grant them again in a non-global entry.
Per report from Boris Korzun. This is an old bug, so back-patch
to all supported branches.
Neil Chen, test case by Masahiko Sawada
Discussion: https://postgr.es/m/111621616618184@mail.yandex.ru
Discussion: https://postgr.es/m/CAA3qoJnr2+1dVJObNtfec=qW4Z0nz=A9+r5bZKoTSy5RDjskMw@mail.gmail.com
For non-MSVC builds this is make's $(CURDIR), while for MSVC builds it
is $topdir/$Config/$module. The directory is added as the second element
in the PATH, so that the install location takes precedence, but the
added PATH element takes precedence over the rest of the PATH.
The reason for this is to allow tests to find built products that are
not installed, such as the libpq_pipeline test driver.
The libpq_pipeline test is adjusted to take advantage of this.
Based on a suggestion from Andres Freund.
Backpatch to release 14.
Discussion: https://postgr.es/m/4941f5a5-2d50-1a0e-6701-14c5fefe92d6@dunslane.net
Andrew Dunstan
Tom Lane
Alvaro Herrera
Thomas Munro
Heikki Linnakangas
Fujii Masao
Peter Eisentraut
Dean Rasheed
Noah Misch
Amit Kapila
David Rowley
Michael Paquier
Andres Freund
Etsuro Fujita
Robert Haas
Peter Geoghegan
Tomas Vondra
Alexander Korotkov
Daniel Gustafsson
Magnus Hagander