Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_ownercheck() functions,
write one common function object_ownercheck() that can handle almost
all of them. We already have all the information we need, such as
which system catalog corresponds to which catalog table and which
column is the owner column.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Previously, membership of role A in role B could be recorded in the
catalog tables only once. This meant that a new grant of role A to
role B would overwrite the previous grant. For other object types, a
new grant of permission on an object - in this case role A - exists
along side the existing grant provided that the grantor is different.
Either grant can be revoked independently of the other, and
permissions remain so long as at least one grant remains. Make role
grants work similarly.
Previously, when granting membership in a role, the superuser could
specify any role whatsoever as the grantor, but for other object types,
the grantor of record must be either the owner of the object, or a
role that currently has privileges to perform a similar GRANT.
Implement the same scheme for role grants, treating the bootstrap
superuser as the role owner since roles do not have owners. This means
that attempting to revoke a grant, or admin option on a grant, can now
fail if there are dependent privileges, and that CASCADE can be used
to revoke these. It also means that you can't grant ADMIN OPTION on
a role back to a user who granted it directly or indirectly to you,
similar to how you can't give WITH GRANT OPTION on a privilege back
to a role which granted it directly or indirectly to you.
Previously, only the superuser could specify GRANTED BY with a user
other than the current user. Relax that rule to allow the grantor
to be any role whose privileges the current user posseses. This
doesn't improve compatibility with what we do for other object types,
where support for GRANTED BY is entirely vestigial, but it makes this
feature more usable and seems to make sense to change at the same time
we're changing related behaviors.
Along the way, fix "ALTER GROUP group_name ADD USER user_name" to
require the same privileges as "GRANT group_name TO user_name".
Previously, CREATEROLE privileges were sufficient for either, but
only the former form was permissible with ADMIN OPTION on the role.
Now, either CREATEROLE or ADMIN OPTION on the role suffices for
either spelling.
Patch by me, reviewed by Stephen Frost.
Discussion: http://postgr.es/m/CA+TgmoaFr-RZeQ+WoQ5nKPv97oT9+aDgK_a5+qWHSgbDsMp1Vg@mail.gmail.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
According to the comments, when an invalid or dropped column oid is passed
to has_column_privilege(), the intention has always been to return NULL.
However, when the caller had table level privilege the invalid/missing
column was never discovered, because table permissions were checked first.
Fix that by introducing extended versions of pg_attribute_acl(check|mask)
and pg_class_acl(check|mask) which take a new argument, is_missing. When
is_missing is NULL, the old behavior is preserved. But when is_missing is
passed by the caller, no ERROR is thrown for dropped or missing
columns/relations, and is_missing is flipped to true. This in turn allows
has_column_privilege to check for column privileges first, providing the
desired semantics.
Not backpatched since it is a user visible behavioral change with no previous
complaints, and the fix is a bit on the invasive side.
Author: Joe Conway
Reviewed-By: Tom Lane
Reported by: Ian Barwick
Discussion: https://postgr.es/m/flat/9b5f4311-157b-4164-7fe7-077b4fe8ed84%40joeconway.com
There are a number of Remove${Something}ById() functions that are
essentially identical in structure and only different in which catalog
they are working on. Refactor this to be one generic function. The
information about which oid column, index, etc. to use was already
available in ObjectProperty for most catalogs, in a few cases it was
easily added.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/331d9661-1743-857f-1cbb-d5728bcd62cb%402ndquadrant.com
For most uses of acl.h the details of how "Acl" internally looks like
are irrelevant. It might make sense to move a lot of the
implementation details into a separate header at a later point.
The main motivation of this change is to avoid including fmgr.h (via
array.h, which needs it for exposed structs) in a lot of files that
otherwise don't need it. A subsequent commit will remove the fmgr.h
include from a lot of files.
Directly include utils/array.h and utils/expandeddatum.h from the
files that need them, but previously included them indirectly, via
acl.h.
Author: Andres Freund
Discussion: https://postgr.es/m/20190803193733.g3l3x3o42uv4qj7l@alap3.anarazel.de
This patch fixes several related cases in which pg_shdepend entries were
never made, or were lost, for references to roles appearing in the ACLs of
schemas and/or types. While that did no immediate harm, if a referenced
role were later dropped, the drop would be allowed and would leave a
dangling reference in the object's ACL. That still wasn't a big problem
for normal database usage, but it would cause obscure failures in
subsequent dump/reload or pg_upgrade attempts, taking the form of
attempts to grant privileges to all-numeric role names. (I think I've
seen field reports matching that symptom, but can't find any right now.)
Several cases are fixed here:
1. ALTER DOMAIN SET/DROP DEFAULT would lose the dependencies for any
existing ACL entries for the domain. This case is ancient, dating
back as far as we've had pg_shdepend tracking at all.
2. If a default type privilege applies, CREATE TYPE recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for types in 9.2.
3. If a default schema privilege applies, CREATE SCHEMA recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for schemas in v10
(commit ab89e465c).
Another somewhat-related problem is that when creating a relation
rowtype or implicit array type, TypeCreate would apply any available
default type privileges to that type, which we don't really want
since such an object isn't supposed to have privileges of its own.
(You can't, for example, drop such privileges once they've been added
to an array type.)
ab89e465c is also to blame for a race condition in the regression tests:
privileges.sql transiently installed globally-applicable default
privileges on schemas, which sometimes got absorbed into the ACLs of
schemas created by concurrent test scripts. This should have resulted
in failures when privileges.sql tried to drop the role holding such
privileges; but thanks to the bug fixed here, it instead led to dangling
ACLs in the final state of the regression database. We'd managed not to
notice that, but it became obvious in the wake of commit da906766c, which
allowed the race condition to occur in pg_upgrade tests.
To fix, add a function recordDependencyOnNewAcl to encapsulate what
callers of get_user_default_acl need to do; while the original call
sites got that right via ad-hoc code, none of the later-added ones
have. Also change GenerateTypeDependencies to generate these
dependencies, which requires adding the typacl to its parameter list.
(That might be annoying if there are any extensions calling that
function directly; but if there are, they're most likely buggy in the
same way as the core callers were, so they need work anyway.) While
I was at it, I changed GenerateTypeDependencies to accept most of its
parameters in the form of a Form_pg_type pointer, making its parameter
list a bit less unwieldy and mistake-prone.
The test race condition is fixed just by wrapping the addition and
removal of default privileges into a single transaction, so that that
state is never visible externally. We might eventually prefer to
separate out tests of default privileges into a script that runs by
itself, but that would be a bigger change and would make the tests
run slower overall.
Back-patch relevant parts to all supported branches.
Discussion: https://postgr.es/m/15719.1541725287@sss.pgh.pa.us
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
There used to be a lot of different *Type and *Kind symbol groups to
address objects within different commands, most of which have been
replaced by ObjectType, starting with
b256f24264. But this conversion was never
done for the ACL commands until now.
This change ends up being just a plain replacement of the types and
symbols, without any code restructuring needed, except deleting some now
redundant code.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
The order in which GRANTs are output is important as GRANTs which have
been GRANT'd by individuals via WITH GRANT OPTION GRANTs have to come
after the GRANT which included the WITH GRANT OPTION. This happens
naturally in the backend during normal operation as we only change
existing ACLs in-place, only add new ACLs to the end, and when removing
an ACL we remove any which depend on it also.
Also, adjust the comments in acl.h to make this clear.
Unfortunately, the updates to pg_dump to handle initial privileges
involved pulling apart ACLs and then combining them back together and
could end up putting them back together in an invalid order, leading to
dumps which wouldn't restore.
Fix this by adjusting the queries used by pg_dump to ensure that the
ACLs are rebuilt in the same order in which they were originally.
Back-patch to 9.6 where the changes for initial privileges were done.
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Consistently refer to such an entry as a "statistics object", not just
"statistics" or "extended statistics". Previously we had a mismash of
terms, accompanied by utter confusion as to whether the term was
singular or plural. That's not only grating (at least to the ear of
a native English speaker) but could be outright misleading, eg in error
messages that seemed to be referring to multiple objects where only one
could be meant.
This commit fixes the code and a lot of comments (though I may have
missed a few). I also renamed two new SQL functions,
pg_get_statisticsextdef -> pg_get_statisticsobjdef
pg_statistic_ext_is_visible -> pg_statistics_obj_is_visible
to conform better with this terminology.
I have not touched the SGML docs other than fixing those function
names; the docs certainly need work but it seems like a separable task.
Discussion: https://postgr.es/m/22676.1494557205@sss.pgh.pa.us
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.czhttps://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
In commit 6c268df, pg_init_privs was added to track the initial
privileges of catalog objects and extensions. Unfortunately, that
commit didn't include understanding of ALTER EXTENSION ADD/DROP, which
allows the objects associated with an extension to be changed after the
initial CREATE EXTENSION script has been run.
The result of this meant that ACLs for objects added through
ALTER EXTENSION ADD were not recorded into pg_init_privs and we would
end up including those ACLs in pg_dump when we shouldn't have.
This commit corrects that by making sure to have pg_init_privs updated
when ALTER EXTENSION ADD/DROP is run, recording the permissions as they
are at ALTER EXTENSION ADD time, and removing any if/when ALTER
EXTENSION DROP is called.
This issue was pointed out by Moshe Jacobson as commentary on bug #14456
(which was actually a bug about versions prior to 9.6 not handling
custom ACLs on extensions correctly, an issue now addressed with
pg_init_privs in 9.6).
Back-patch to 9.6 where pg_init_privs was introduced.
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Most code was casting this through a generic Node. By declaring
everything as RoleSpec appropriately, we can remove a bunch of casts and
ad-hoc node type checking.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Add a location field to the DefElem struct, used to parse many utility
commands. Update various error messages to supply error position
information.
To propogate the error position information in a more systematic way,
create a ParseState in standard_ProcessUtility() and pass that to
interested functions implementing the utility commands. This seems
better than passing the query string and then reassembling a parse state
ad hoc, which violates the encapsulation of the ParseState type.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
This will prevent users from creating roles which begin with "pg_" and
will check for those roles before allowing an upgrade using pg_upgrade.
This will allow for default roles to be provided at initdb time.
Reviews by José Luis Tallón and Robert Haas
Commands such as ALTER USER, ALTER GROUP, ALTER ROLE, GRANT, and the
various ALTER OBJECT / OWNER TO, as well as ad-hoc clauses related to
roles such as the AUTHORIZATION clause of CREATE SCHEMA, the FOR clause
of CREATE USER MAPPING, and the FOR ROLE clause of ALTER DEFAULT
PRIVILEGES can now take the keywords CURRENT_USER and SESSION_USER as
user specifiers in place of an explicit user name.
This commit also fixes some quite ugly handling of special standards-
mandated syntax in CREATE USER MAPPING, which in particular would fail
to work in presence of a role named "current_user".
The special role specifiers PUBLIC and NONE also have more consistent
handling now.
Also take the opportunity to add location tracking to user specifiers.
Authors: Kyotaro Horiguchi. Heavily reworked by Álvaro Herrera.
Reviewed by: Rushabh Lathia, Adam Brightwell, Marti Raudsepp.
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
They don't actually do anything yet; that will get fixed in a
follow-on commit. But this gets the basic infrastructure in place,
including CREATE/ALTER/DROP EVENT TRIGGER; support for COMMENT,
SECURITY LABEL, and ALTER EXTENSION .. ADD/DROP EVENT TRIGGER;
pg_dump and psql support; and documentation for the anticipated
initial feature set.
Dimitri Fontaine, with review and a bunch of additional hacking by me.
Thom Brown extensively reviewed earlier versions of this patch set,
but there's not a whole lot of that code left in this commit, as it
turns out.
Because permissions are assigned to element types, not array types,
complaining about permission denied on an array type would be
misleading to users. So adjust the reporting to refer to the element
type instead.
In order not to duplicate the required logic in two dozen places,
refactor the permission denied reporting for types a bit.
pointed out by Yeb Havinga during the review of the type privilege
feature
Hitherto, the information schema only showed explicitly granted
privileges that were visible in the *acl catalog columns. If no
privileges had been granted, the implicit privileges were not shown.
To fix that, add an SQL-accessible version of the acldefault()
function, and use that inside the aclexplode() calls to substitute the
catalog-specific default privilege set for null values.
reviewed by Abhijit Menon-Sen
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
Instead, foreign tables are treated just like views: permissions can
be granted using GRANT privilege ON [TABLE] foreign_table_name TO role,
and revoked similarly. GRANT/REVOKE .. FOREIGN TABLE is no longer
supported, just as we don't support GRANT/REVOKE .. VIEW. The set of
accepted permissions for foreign tables is now identical to the set for
regular tables, and views.
Per report from Thom Brown, and subsequent discussion.
This mostly involves making it work with the objectaddress.c framework,
which does most of the heavy lifting. In that vein, change
GetForeignDataWrapperOidByName to get_foreign_data_wrapper_oid and
GetForeignServerOidByName to get_foreign_server_oid, to match the
pattern we use for other object types.
Robert Haas and Shigeru Hanada
Peter Eisentraut
Peter Geoghegan
Robert Haas
Tom Lane
Andrew Dunstan
Bruce Momjian
Joe Conway
Andres Freund
Peter Eisentraut
Stephen Frost
Alvaro Herrera