costing us lots more to maintain than it was worth. On shared tables
it was of exactly zero benefit because we couldn't trust it to be
up to date. On temp tables it sometimes saved an lseek, but not often
enough to be worth getting excited about. And the real problem was that
we forced an lseek on every relcache flush in order to update the field.
So all in all it seems best to lose the complexity.
conversion of basic ASCII letters. Remove all uses of strcasecmp and
strncasecmp in favor of new functions pg_strcasecmp and pg_strncasecmp;
remove most but not all direct uses of toupper and tolower in favor of
pg_toupper and pg_tolower. These functions use the same notions of
case folding already developed for identifier case conversion. I left
the straight locale-based folding in place for situations where we are
just manipulating user data and not trying to match it to built-in
strings --- for example, the SQL upper() function is still locale
dependent. Perhaps this will prove not to be what's wanted, but at
the moment we can initdb and pass regression tests in Turkish locale.
the next are handled by ReleaseAndReadBuffer rather than separate
ReleaseBuffer and ReadBuffer calls. This cuts the number of acquisitions
of the BufMgrLock by a factor of 2 (possibly more, if an indexscan happens
to pull successive rows from the same heap page). Unfortunately this
doesn't seem enough to get us out of the recently discussed context-switch
storm problem, but it's surely worth doing anyway.
* removed a few redundant defines
* get_user_name safe under win32
* rationalized pipe read EOF for win32 (UPDATED PATCH USED)
* changed all backend instances of sleep() to pg_usleep
- except for the SLEEP_ON_ASSERT in assert.c, as it would exceed a
32-bit long [Note to patcher: If a SLEEP_ON_ASSERT of 2000 seconds is
acceptable, please replace with pg_usleep(2000000000L)]
I added a comment to that part of the code:
/*
* It would be nice to use pg_usleep() here, but only does 2000 sec
* or 33 minutes, which seems too short.
*/
sleep(1000000);
Claudio Natoli
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
boxes. Change interface to user-defined GiST support methods union and
picksplit. Now instead of bytea struct it used special GistEntryVector
structure.
and FreeDir routines modeled on the existing AllocateFile/FreeFile.
Like the latter, these routines will avoid failing on EMFILE/ENFILE
conditions whenever possible, and will prevent leakage of directory
descriptors if an elog() occurs while one is open.
Also, reduce PANIC to ERROR in MoveOfflineLogs() --- this is not
critical code and there is no reason to force a DB restart on failure.
All per recent trouble report from Olivier Hubaut.
1) Now puts in exactly the same change as the current-cvs mingw code
does. (see
http://cvs.sourceforge.net/viewcvs.py/mingw/runtime/mingwex/dirent.c?r1=
1.3&r2=1.4, second part of the patch).
2) Updates both xlog.c and slru.c in backend/access/transam/
3) Also updates pg_resetxlog, which also uses readdir() and checks the
errno value after the loop.
Magnus Hagander
wit: Add a header record to each WAL segment file so that it can be reliably
identified. Avoid splitting WAL records across segment files (this is not
strictly necessary, but makes it simpler to incorporate the header records).
Make WAL entries for file creation, deletion, and truncation (as foreseen but
never implemented by Vadim). Also, add support for making XLOG_SEG_SIZE
configurable at compile time, similarly to BLCKSZ. Fix a couple bugs I
introduced in WAL replay during recent smgr API changes. initdb is forced
due to changes in pg_control contents.
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
whereToSendOutput instead because they are really inquiring about
the correct client communication protocol. Update some comments.
This is pointing towards supporting regular FE/BE client protocol
in a standalone backend, per discussion a month or so back.
complete ExtendCLOG() before advancing nextXid, so that if that routine
fails, the next incoming transaction will try it again. Per trouble
report from Christopher Kings-Lynne.
should not be too eager to reject paths involving unknown schemas, since
it can't really tell whether the schemas exist in the target database.
(Also, when reading pg_dumpall output, it could be that the schemas
don't exist yet, but eventually will.) ALTER USER SET has a similar issue.
So, reduce the normal ERROR to a NOTICE when checking search_path values
for these commands. Supporting this requires changing the API for GUC
assign_hook functions, which causes the patch to touch a lot of places,
but the changes are conceptually trivial.
tuptoaster.c --- fields that are compressed in-line are not a reason
to invoke the toaster. Along the way, add a couple more htup.h macros
to eliminate confusing negated tests, and get rid of the already
vestigial TUPLE_TOASTER_ACTIVE symbol.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
to step more than one entry after descending the search tree to arrive at
the correct place to start the scan. This can improve the behavior
substantially when there are many entries equal to the chosen boundary
value. Per suggestion from Dmitry Tkach, 14-Jul-03.
some concurrent changes Jan was making to the bufmgr. Here's an
updated version of the patch -- it should apply cleanly to CVS
HEAD and passes the regression tests.
This patch makes the following changes:
- remove the UnlockAndReleaseBuffer() and UnlockAndWriteBuffer()
macros, and replace uses of them with calls to the appropriate
functions.
- remove a bunch of #ifdef BMTRACE code: it is ugly & broken
(i.e. it doesn't compile)
- make BufferReplace() return a bool, not an int
- cleanup some logic in bufmgr.c; should be functionality
equivalent to the previous code, just cleaner now
- remove the BM_PRIVATE flag as it is unused
- improve a few comments, etc.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
protocol, per report from Igor Shevchenko. NOTIFY thought it could
do its thing if transaction blockState is TBLOCK_DEFAULT, but in
reality it had better check the low-level transaction state is
TRANS_DEFAULT as well. Formerly it was not possible to wait for the
client in a state where the first is true and the second is not ...
but now we can have such a state. Minor cleanup in StartTransaction()
as well.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
invalid (has the wrong magic number) until the build is entirely
complete. This turns out to cost no additional writes in the normal
case, since we were rewriting the metapage at the end of the process
anyway. In normal scenarios there's no real gain in security, because
a failed index build would roll back the transaction leaving an unused
index file, but for rebuilding shared system indexes this seems to add
some useful protection.
post-abort cleanup hooks. I'm surprised that we have not needed this
already, but I need it now to fix a plpgsql problem, and the usefulness
for other dynamically loaded modules seems obvious.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
really general fix might be difficult, I believe the only case where
AtCommit_Notify could see an uncommitted tuple is where the other guy
has just unlistened and not yet committed. The best solution seems to
be to just skip updating that tuple, on the assumption that the other
guy does not want to hear about the notification anyway. This is not
perfect --- if the other guy rolls back his unlisten instead of committing,
then he really should have gotten this notify. But to do that, we'd have
to wait to see if he commits or not, or make UNLISTEN hold exclusive lock
on pg_listener until commit. Either of these answers is deadlock-prone,
not to mention horrible for interactive performance. Do it this way
for now. (What happened to that project to do LISTEN/NOTIFY in memory
with no table, anyway?)
pghackers. This fixes the problem recently reported by Markus KrÌutner
(hash bucket split corrupts the state of scans being done concurrently),
and I believe it also fixes all the known problems with deadlocks in
hash index operations. Hash indexes are still not really ready for prime
time (since they aren't WAL-logged), but this is a step forward.
killed items; just skip to the next item immediately. Only check for
key equality when we reach a non-killed item or the end of the index
page. This saves key comparisons when there are lots of killed items,
as for example in a heavily-updated table that's not been vacuumed lately.
Seems to be a win for pgbench anyway.
layout; therefore, this change forces REINDEX of hash indexes (though
not a full initdb). Widen hashm_ntuples to double so that hash space
management doesn't get confused by more than 4G entries; enlarge the
allowed number of free-space-bitmap pages; replace the useless bshift
field with a useful bmshift field; eliminate 4 bytes of wasted space
in the per-page special area.
scheme. A pleasant side effect is that it is *much* faster when deleting
a large fraction of the indexed tuples, because of elimination of
redundant hash_step activity induced by hash_adjscans. Various other
continuing code cleanup.
yet). Fix a couple of bugs that would only appear if multiple bitmap pages
are used, including a buffer reference leak and incorrect computation of bit
indexes. Get rid of 'overflow address' concept, which accomplished nothing
except obfuscating the code and creating a risk of failure due to limited
range of offset field. Rename some misleadingly-named fields and routines,
and improve documentation.
explanation of the remarkably confusing page addressing scheme.
The file also includes my planned-but-not-yet-implemented revision
of the hash index locking scheme.
target columns in INSERT and UPDATE targetlists. Don't rely on resname
to be accurate in ruleutils, either. This fixes bug reported by
Donald Fraser, in which renaming a column referenced in a rule did not
work very well.
index pages: when _bt_getbuf asks the FSM for a free index page, it is
possible (and, in some cases, even moderately likely) that the answer
will be the same page that _bt_split is trying to split. _bt_getbuf
already knew that the returned page might not be free, but it wasn't
prepared for the possibility that even trying to lock the page could
be problematic. Fix by doing a conditional rather than unconditional
grab of the page lock.
bottom. Otherwise we fail to moveright when the root page was split while
we were "in flight" to it. This is not a significant problem when the root
is above the leaf level, but if the root was also a leaf (ie, a single-page
index just got split) we may return the wrong leaf page to the caller,
resulting in failure to find a key that is in fact present. Bug has existed
at least since 7.1, probably forever.
fixed incorrect initial setting of StartUpID. The logic in XLogWrite()
expects that Write->curridx is advanced to the next page as soon as
LogwrtResult points to the end of the current page, but StartupXLOG()
failed to make that happen when the old WAL ended exactly on a page
boundary. Per trouble report from Hannu Krosing.
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
least-recently-used strategy from clog.c into slru.c. It doesn't
change any visible behaviour and passes all regression tests plus a
TruncateCLOG test done manually.
Apart from refactoring I made a little change to SlruRecentlyUsed,
formerly ClogRecentlyUsed: It now skips incrementing lru_counts, if
slotno is already the LRU slot, thus saving a few CPU cycles. To make
this work, lru_counts are initialised to 1 in SimpleLruInit.
SimpleLru will be used by pg_subtrans (part of the nested transactions
project), so the main purpose of this patch is to avoid future code
duplication.
Manfred Koizar
advertised in RowDescription message. Depending on the physical tuple's
column count is not really correct, since according to heap_getattr()
conventions the tuple may be short some columns, which will automatically
get read as nulls. Problem has been latent since forever, but was only
exposed by recent change to skip a projection step in SELECT * FROM...
example from Rao Kumar. This is a very corner corner-case, requiring
a minimum of three closely-spaced database crashes and an unlucky
positioning of the second recovery's checkpoint record before you'd notice
any problem. But the consequences are dire enough that it's a must-fix.
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
the type OID and typmod of the underlying base type. Per discussions
a few weeks ago with Andreas Pflug and others. Note that this behavioral
change affects both old- and new-protocol clients.
dead xlog segments are not considered part of a critical section. It is
not necessary to force a database-wide panic if we get a failure in these
operations. Per recent trouble reports.
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
NULL key pointer, indicating that the existing scan key should be reused.
This behavior isn't used yet but will be needed for my planned fix to
the keys_are_unique code.