Several submitted and even committed patches have run into the problem
that C89, our baseline, does not provide minimum/maximum values for
various integer datatypes. C99's stdint.h does, but we can't rely on
it.
Several parts of the code defined limits locally, so instead centralize
the definitions to c.h.
This patch also changes the more obvious usages of literal limit values;
there's more places that could be changed, but it's less clear whether
it's beneficial to change those.
Author: Andrew Gierth
Discussion: 87619tc5wc.fsf@news-spur.riddles.org.uk
Previously, you could do \set variable operand1 operator operand2, but
nothing more complicated. Now, you can \set variable expression, which
makes it much simpler to do multi-step calculations here. This also
adds support for the modulo operator (%), with the same semantics as in
C.
Robert Haas and Fabien Coelho, reviewed by Álvaro Herrera and
Stephen Frost
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
If the called command fails to return data, runShellCommand forgot to
pclose() the pipe before returning. This is fairly harmless in the current
code, because pgbench would then abandon further processing of that client
thread; so no more than nclients descriptors could be leaked this way. But
it's not hard to imagine future improvements whereby that wouldn't be true.
In any case, it's sloppy coding, so patch all branches. Found by Coverity.
This allows transactions that take longer than specified limit to be counted
separately. With --rate, transactions that are already late by the time we
get to execute them are skipped altogether. Using --latency-limit with
--rate allows you to "catch up" more quickly, if there's a hickup in the
server causing a lot of transactions to stall momentarily.
Fabien COELHO, reviewed by Rukh Meski and heavily refactored by me.
The previous coding first generated a uniform random value between 0.0 and
1.0, then converted that to an integer between 1 and 10000, and divided that
again by 10000. Those conversions are unnecessary; we can use the double
value that pg_erand48() returns directly. While we're at it, put the logic
into a helper function, getPoissonRand().
The largest delay generated by the old coding was about 9.2 times the
average, because of the way the uniformly distributed value used for the
calculation was truncated to 1/10000 granularity. The new coding doesn't
have such clamping. With my laptop's DBL_MIN value, the maximum delay with
the new coding is about 700x the average. That seems acceptable - any
reasonable pgbench session should last long enough to average that out.
Backpatch to 9.4.
The reported latency values now include the "schedule lag" time, that is,
the time between the transaction's scheduled start time and the time it
actually started. This relates better to a model where requests arrive at a
certain rate, and we are interested in the response time to the end user or
application, rather than the response time of the database itself.
Also, when --rate is used, include the schedule lag time in the log output.
The --rate option is new in 9.4, so backpatch to 9.4. It seems better to
make this change in 9.4, while we're still in the beta period, than ship a
9.4 version that calculates the values differently than 9.5.
Now benchmarking options such as -c cannot be used if initializing
option (-i) is specified. Also initializing options such as -F cannot
be used if initializing option is not specified.
Tatsuo Ishii and Fabien COELHO.
Change the total-transactions counters from int32 to int64 to accommodate
cases where we do more than 2^31 transactions during a run. This patch
does not change the INT_MAX limit on explicit "-t" parameters, but it
does allow the product of the -t and -c parameters to exceed INT_MAX, or
allow a -T limit that is large enough that more than 2^31 transactions
can be completed. While pgbench did not actually fail in such cases,
it did print an incorrect total-transactions count, and some of the
derived numbers such as TPS would have been wrong as well.
Tomas Vondra
C89 says that compound initializers may only contain constant expressions;
a restriction violated by commit 89d00cbe. While we've had no actual field
complaints about this, C89 is still the project standard, and it's not
saving all that much code to break compatibility here. So let's adhere to
the old restriction.
In passing, replace a bunch of hardwired constants "256" with
sizeof(target-variable), just because the latter is more readable and
less breakable. And const-ify where possible.
Back-patch to 9.3 where the nonportable code was added.
Andres Freund and Tom Lane
We used to have externs for getopt() and its API variables scattered
all over the place. Now that we find we're going to need to tweak the
variable declarations for Cygwin, it seems like a good idea to have
just one place to tweak.
In this commit, the variables are declared "#ifndef HAVE_GETOPT_H".
That may or may not work everywhere, but we'll soon find out.
Andres Freund
If --progress=2148 or higher was given, the calculation of the next time
to report overflowed, and pgbench would print a progress report very
frequently.
Kingter Wang
Integer overflow showed minus percent and minus remaining time something like this.
239300000 of 3800000000 tuples (-48%) done (elapsed 226.86 s, remaining -696.10 s).
pgbench formerly failed on lines longer than BUFSIZ, unexpectedly
splitting them into multiple commands. Allow it to work with any
length of input line.
Sawada Masahiko
Isolate transaction latency (elapsed time between submitting first
command and receiving response to last command) from client-side delays
pertaining to the --rate schedule. Under --rate, report schedule lag as
defined in the documentation. Report latency standard deviation
whenever we collect the measurements to do so. All of these changes
affect --progress messages and the final report.
Fabien COELHO, reviewed by Pavel Stehule.
This controls the target transaction rate to certain tps, rather than
maximum. Patch contributed by Fabien COELHO, reviewed by Greg Smith,
and slight editing by me.
Make slightly better decisions about indentation than what pgindent
is capable of. Mostly breaking out long function calls into one
line per argument, with a few other minor adjustments.
No functional changes- all whitespace.
pgindent ran cleanly (didn't change anything) after.
Passes all regressions.
We had two copies of this function in the backend and libpq, which was
already pretty bogus, but it turns out that we need it in some other
programs that don't use libpq (such as pg_test_fsync). So put it where
it probably should have been all along. The signal-mask-initialization
support in src/backend/libpq/pqsignal.c stays where it is, though, since
we only need that in the backend.
libpgcommon is a new static library to allow sharing code among the
various frontend programs and backend; this lets us eliminate duplicate
implementations of common routines. We avoid libpgport, because that's
intended as a place for porting issues; per discussion, it seems better
to keep them separate.
The first use case, and the only implemented by this patch, is pg_malloc
and friends, which many frontend programs were already using.
At the same time, we can use this to provide palloc emulation functions
for the frontend; this way, some palloc-using files in the backend can
also be used by the frontend cleanly. To do this, we change palloc() in
the backend to be a function instead of a macro on top of
MemoryContextAlloc(). This was previously believed to cause loss of
performance, but this implementation has been tweaked by Tom and Andres
so that on modern compilers it provides a slight improvement over the
previous one.
This lets us clean up some places that were already with
localized hacks.
Most of the pg_malloc/palloc changes in this patch were authored by
Andres Freund. Zoltán Böszörményi also independently provided a form of
that. libpgcommon infrastructure was authored by Álvaro.
The new option specifies length of aggregation interval (in
seconds). May be used only together with -l. With this option, the log
contains per-interval summary (number of transactions, min/max latency
and two additional fields useful for variance estimation).
Patch contributed by Tomas Vondra, reviewed by Pavel Stehule. Slight
change by Tatsuo Ishii, suggested by Robert Hass to emit an error
message indicating that the option is not currently supported on
Windows.
Beyond 21474, the number of accounts exceed the range for int4. Change the
initialization code to use bigint for account id columns when scale is large
enough, and switch to using int64s for the variables in pgbench code. The
threshold where we switch to bigints is set at 20000, because that's easier
to remember and document than 21474, and ensures that there is some headroom
when int4s are used.
Greg Smith, with various changes by Euler Taveira de Oliveira, Gurjeet
Singh and Satoshi Nagayasu.
(-i), producing only one progress message per 5 seconds along with
elapsed time and estimated remaining time. Also add elapsed time and
estimated remaining time to the default logging(prints one message
each 100000 rows).
Patch contributed by Tomas Vondra, reviewed by Jeevan Chalke and
Tatsuo Ishii.