A couple of code paths use the special area on the page passed by the
function caller, expecting to find some data in it. However, feeding
an incorrect page can lead to out-of-bound reads when trying to access
the page special area (like a heap page that has no special area,
leading PageGetSpecialPointer() to grab a pointer outside the allocated
page).
The functions used for hash and btree indexes have some protection
already against that, while some other functions using a relation OID
as argument would make sure that the access method involved is correct,
but functions taking in input a raw page without knowing the relation
the page is attached to would run into problems.
This commit improves the set of checks used in the code paths of BRIN,
btree (including one check if a leaf page is found with a non-zero
level), GIN and GiST to verify that the page given in input has a
special area size that fits with each access method, which is done
though PageGetSpecialSize(), becore calling PageGetSpecialPointer().
The scope of the checks done is limited to work with pages that one
would pass after getting a block with get_raw_page(), as it is possible
to craft byteas that could bypass existing code paths. Having too many
checks would also impact the usability of pageinspect, as the existing
code is very useful to look at the content details in a corrupted page,
so the focus is really to avoid out-of-bound reads as this is never a
good thing even with functions whose execution is limited to
superusers.
The safest approach could be to rework the functions so as these fetch a
block using a relation OID and a block number, but there are also cases
where using a raw page is useful.
Tests are added to cover all the code paths that needed such checks, and
an error message for hash indexes is reworded to fit better with what
this commit adds.
Reported-By: Alexander Lakhin
Author: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/16527-ef7606186f0610a1@postgresql.org
Discussion: https://postgr.es/m/561e187b-3549-c8d5-03f5-525c14e65bd0@postgrespro.ru
Backpatch-through: 10
911e702077 implemented operator class parameters including the signature length
in ltree. Previously, the signature length for gist_ltree_ops was 8. Because
of bug 911e702077 the default signature length for gist_ltree_ops became 28 for
ltree 1.1 (where options method is NOT provided) and 8 for ltree 1.2 (where
options method is provided). This commit changes the default signature length
for ltree 1.1 to 8.
Existing gist_ltree_ops indexes might be corrupted in various scenarios.
Thus, we have to recommend reindexing all the gist_ltree_ops indexes after
the upgrade.
Reported-by: Victor Yegorov
Reviewed-by: Tomas Vondra, Tom Lane, Andres Freund, Nikita Glukhov
Reviewed-by: Andrew Dunstan
Author: Tomas Vondra, Alexander Korotkov
Discussion: https://postgr.es/m/17406-71e02820ae79bb40%40postgresql.org
Discussion: https://postgr.es/m/d80e0a55-6c3e-5b26-53e3-3c4f973f737c%40enterprisedb.com
This caused the function to fail, as the aligned copy of the raw page
given by the function caller was not saved in the correct memory
context, which needs to be multi_call_memory_ctx in this case.
Issue introduced by 076f4d9.
Per buildfarm members sifika, mylodon and longfin. I have reproduced
that locally with macos.
Discussion: https://postgr.es/m/YjFPOtfCW6yLXUeM@paquier.xyz
Backpatch-through: 10
This commit fixes a set of issues related to the use of the SQL
functions in this module when the caller is able to pass down raw page
data as input argument:
- The page size check was fuzzy in a couple of places, sometimes
looking after only a sub-range, but what we are looking for is an exact
match on BLCKSZ. After considering a few options here, I have settled
down to do a generalization of get_page_from_raw(). Most of the SQL
functions already used that, and this is not strictly required if not
accessing an 8-byte-wide value from a raw page, but this feels safer in
the long run for alignment-picky environment, particularly if a code
path begins to access such values. This also reduces the number of
strings that need to be translated.
- The BRIN function brin_page_items() uses a Relation but it did not
check the access method of the opened index, potentially leading to
crashes. All the other functions in need of a Relation already did
that.
- Some code paths could fail on elog(), but we should to use ereport()
for failures that can be triggered by the user.
Tests are added to stress all the cases that are fixed as of this
commit, with some junk raw pages (\set VERBOSITY ensures that this works
across all page sizes) and unexpected index types when functions open
relations.
Author: Michael Paquier, Justin Prysby
Discussion: https://postgr.es/m/20220218030020.GA1137@telsasoft.com
Backpatch-through: 10
Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180. Developers may see faster failures by setting that
environment variable to some lesser number of seconds. In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180. This change raises the default for some briefer
timeouts. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
Some pre-2017 Test::More versions need perfect $Test::Builder::Level
maintenance to find the variable. Buildfarm member snapper reported an
overall failure that the file intended to hide via the TODO construct.
That trouble was reachable in v11 and v10. For later branches, this
serves as defense in depth. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220202055556.GB2745933@rfd.leadboat.com
If contrib/btree_gist is used to make a GIST index on a char(N)
(bpchar) column, and that column is retrieved via an index-only
scan, what came out had all trailing spaces removed. Since
that doesn't happen in any other kind of table scan, this is
clearly a bug. The cause is that gbt_bpchar_compress() strips
trailing spaces (using rtrim1) before a new index entry is made.
That was probably a good idea when this code was first written,
but since we invented index-only scans, it's not so good.
One answer could be to mark this opclass as incapable of index-only
scans. But to do so, we'd need an extension module version bump,
followed by manual action by DBAs to install the updated version
of btree_gist. And it's not really a desirable place to end up,
anyway.
Instead, let's fix the code by removing the unwanted space-stripping
action and adjusting the opclass's comparison logic to ignore
trailing spaces as bpchar normally does. This will not hinder
cases that work today, since index searches with this logic will
act the same whether trailing spaces are stored or not. It will
not by itself fix the problem of getting space-stripped results
from index-only scans, of course. Users who care about that can
REINDEX affected indexes after installing this update, to immediately
replace all improperly-truncated index entries. Otherwise, it can
be expected that the index's behavior will change incrementally as
old entries are replaced by new ones.
Per report from Alexander Lakhin. Back-patch to all supported branches.
Discussion: https://postgr.es/m/696c995b-b37f-5526-f45d-04abe713179f@gmail.com
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
pgfdw_report_error() in postgres_fdw gets a message from PGresult or
PGconn to report an error received from a remote server. Previously
if it could get a message from neither of them, it reported empty
message unexpectedly. The cause of this issue was that pgfdw_report_error()
didn't handle properly the case where no message could be obtained
and its local variable message_primary was set to '\0'.
This commit improves pgfdw_report_error() so that it reports the message
"could not obtain ..." when it gets no message and message_primary
is set to '\0'. This is the same behavior as when message_primary is NULL.
dblink_res_error() in dblink has the same issue, so this commit also
improves it in the same way.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/477c16c8-7ea4-20fc-38d5-ed3a77ed616c@oss.nttdata.com
In the same spirit as 6301c3ada, fix some more places where we were
using list_delete_first() in a loop and thereby risking O(N^2)
behavior. It's not clear that the lists manipulated in these spots
can get long enough to be really problematic ... but it's not clear
that they can't, either, and the fixes are simple enough.
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Windows fails on a request to read() more than INT_MAX bytes,
and perhaps other platforms could have similar issues. Let's
adjust this code to read at most 1GB per call.
(One would not have thought the file could get that big, but now
we have a field report of trouble, so it can. We likely ought to
add some mechanism to limit the size of the query-texts file
separately from the size of the hash table. That is not this
patch, though.)
Per bug #17254 from Yusuke Egashira. It's been like this for
awhile, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17254-a926c89dc03375c2@postgresql.org
Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
Commit c7b7311f6 adjusted conversion_error_callback to always use
information from the query's rangetable, to avoid doing catalog lookups
in an already-failed transaction. However, as a result of the utterly
inadequate documentation for make_tuple_from_result_row, I failed to
realize that fsstate could be NULL in some contexts. That led to a
crash if we got a conversion error in such a context. Fix by falling
back to the previous coding when fsstate is NULL. Improve the
commentary, too.
Per report from Andrey Borodin. Back-patch to 9.6, like the previous
patch.
Discussion: https://postgr.es/m/08916396-55E4-4D68-AB3A-BD6066F9E5C0@yandex-team.ru
It turns out that the instability complained of in commit d3c09b9b1
has an embarrassingly simple explanation. The test script waits for
the standby to flush incoming WAL to disk, but it should wait for
the WAL to be replayed, since we are testing for the effects of that
to be visible.
While at it, use wait_for_catchup instead of reinventing that logic,
and adjust $Test::Builder::Level to improve future error reports.
Back-patch to v12 where the necessary infrastructure came in
(cf. aforesaid commit). Also back-patch 7d1aa6bf1 so that the
test will actually get run.
Discussion: https://postgr.es/m/2854602.1632852664@sss.pgh.pa.us
OpenSSL 3 introduced the concept of providers to support modularization,
and moved the outdated ciphers to the new legacy provider. In case it's
not loaded in the users openssl.cnf file there will be a lot of regress
test failures, so add alternative outputs covering those.
Also document the need to load the legacy provider in order to use older
ciphers with OpenSSL-enabled pgcrypto.
This will be backpatched to all supported version once there is sufficient
testing in the buildfarm of OpenSSL 3.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/FEF81714-D479-4512-839B-C769D2605F8A@yesql.se
Backpatch-through: 9.6
The PX layer in pgcrypto is handling digest padding on its own uniformly
for all backend implementations. Starting with OpenSSL 3.0.0, DecryptUpdate
doesn't flush the last block in case padding is enabled so explicitly
disable it as we don't use it.
This will be backpatched to all supported version once there is sufficient
testing in the buildfarm of OpenSSL 3.
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/FEF81714-D479-4512-839B-C769D2605F8A@yesql.se
Backpatch-through: 9.6
This has previously not been a problem (that anyone ever reported),
but in future OpenSSL versions (3.0.0), where legacy ciphers are/can
be disabled, this is the place where this is reported. So we need to
catch the error here, otherwise the higher-level functions would
return garbage. The nearby encryption code already handled errors
similarly.
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/9e9c431c-0adc-7a6d-9b1a-915de1ba3fe7@enterprisedb.com
Backpatch-through: 9.6
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
As a result of confusion about whether the "char" type is signed or
unsigned, scans for index searches like "col < 'x'" or "col <= 'x'"
would start at the middle of the index not the left end, thus missing
many or all of the entries they should find. Fortunately, this
is not a symptom of index corruption. It's only the search logic
that is broken, and we can fix it without unpleasant side-effects.
Per report from Jason Kim. This has been wrong since btree_gin's
beginning, so back-patch to all supported branches.
Discussion: https://postgr.es/m/20210810001649.htnltbh7c63re42p@jasonk.me
postgres_fdw imported generated columns from the remote tables as plain
columns, and caused failures like "ERROR: cannot insert a non-DEFAULT
value into column "foo"" when inserting into the foreign tables, as it
tried to insert values into the generated columns. To fix, we do the
following under the assumption that generated columns in a postgres_fdw
foreign table are defined so that they represent generated columns in
the underlying remote table:
* Send DEFAULT for the generated columns to the foreign server on insert
or update, not generated column values computed on the local server.
* Add to postgresImportForeignSchema() an option "import_generated" to
include column generated expressions in the definitions of foreign
tables imported from a foreign server. The option is true by default.
The assumption seems reasonable, because that would make a query of the
postgres_fdw foreign table return values for the generated columns that
are consistent with the generated expression.
While here, fix another issue in postgresImportForeignSchema(): it tried
to include column generated expressions as column default expressions in
the foreign table definitions when the import_default option was enabled.
Per bug #16631 from Daniel Cherniy. Back-patch to v12 where generated
columns were added.
Discussion: https://postgr.es/m/16631-e929fe9db0ffc7cf%40postgresql.org
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
As in 50371df26, this is a bad idea since the callback can't really
know what error is being thrown and thus whether or not it is safe
to attempt catalog accesses. Rather than pushing said accesses into
the mainline code where they'd usually be a waste of cycles, we can
look at the query's rangetable instead.
This change does mean that we'll be printing query aliases (if any
were used) rather than the table or column's true name. But that
doesn't seem like a bad thing: it's certainly a more useful definition
in self-join cases, for instance. In any case, it seems unlikely that
any applications would be depending on this detail, so it seems safe
to change.
Patch by me. Original complaint by Andres Freund; Bharath Rupireddy
noted the connection to conversion_error_callback.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
For no obvious reason, isolationtester has always insisted that
session and step names be written with double quotes. This is
fairly tedious and does little for test readability, especially
since the names that people actually choose almost always look
like normal identifiers. Hence, let's tweak the lexer to allow
SQL-like identifiers not only double-quoted strings.
(They're SQL-like, not exactly SQL, because I didn't add any
case-folding logic. Also there's no provision for U&"..." names,
not that anyone's likely to care.)
There is one incompatibility introduced by this change: if you write
"foo""bar" with no space, that used to be taken as two identifiers,
but now it's just one identifier with an embedded quote mark.
I converted all the src/test/isolation/ specfiles to remove
unnecessary double quotes, but stopped there because my
eyes were glazing over already.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/759113.1623861959@sss.pgh.pa.us
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
If autovacuum comes along just after we fill table test_seg with
some data, it will update the stats to the point where we prefer
a plain indexscan over a bitmap scan, breaking the expected
output (as well as the point of the test case). To fix, just
force a bitmap scan to be chosen here.
This has evidently been wrong since commit de1d042f5. It's not
clear why we just recently saw any buildfarm failures due to it;
but prairiedog has failed twice on this test in the past week.
Hence, backpatch to v11 where this test case came in.
Commit 428b260f8 broke planning of cases where row marks are needed
(SELECT FOR UPDATE, etc) and one of the query's tables is a foreign
table that has regular table(s) as inheritance children. We got the
reverse case right, but apparently were thinking that foreign tables
couldn't be inheritance parents. Not so; so we need to be able to
add a CTID junk column while adding a new child, not only a wholerow
junk column.
Back-patch to v12 where the faulty code came in.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEmo3FV1LAQ4TVyS2h1WM=kMkZUmbNuZSCnfHvMcUcPeA@mail.gmail.com
If a cross-partition UPDATE violates a constraint on the target partition,
and the columns in the new partition are in different physical order than
in the parent, the error message can reveal columns that the user does not
have SELECT permission on. A similar bug was fixed earlier in commit
804b6b6db4.
The cause of the bug is that the callers of the
ExecBuildSlotValueDescription() function got confused when constructing
the list of modified columns. If the tuple was routed from a parent, we
converted the tuple to the parent's format, but the list of modified
columns was grabbed directly from the child's RTE entry.
ExecUpdateLockMode() had a similar issue. That lead to confusion on which
columns are key columns, leading to wrong tuple lock being taken on tables
referenced by foreign keys, when a row is updated with INSERT ON CONFLICT
UPDATE. A new isolation test is added for that corner case.
With this patch, the ri_RangeTableIndex field is no longer set for
partitions that don't have an entry in the range table. Previously, it was
set to the RTE entry of the parent relation, but that was confusing.
NOTE: This modifies the ResultRelInfo struct, replacing the
ri_PartitionRoot field with ri_RootResultRelInfo. That's a bit risky to
backpatch, because it breaks any extensions accessing the field. The
change that ri_RangeTableIndex is not set for partitions could potentially
break extensions, too. The ResultRelInfos are visible to FDWs at least,
and this patch required small changes to postgres_fdw. Nevertheless, this
seem like the least bad option. I don't think these fields widely used in
extensions; I don't think there are FDWs out there that uses the FDW
"direct update" API, other than postgres_fdw. If there is, you will get a
compilation error, so hopefully it is caught quickly.
Backpatch to 11, where support for both cross-partition UPDATEs, and unique
indexes on partitioned tables, were added.
Reviewed-by: Amit Langote
Security: CVE-2021-3393
Commit 08d2d58a2 added an assertion assuming that the retrieved_rows
estimate for a foreign relation, which is re-used to cost pre-sorted
foreign paths with local stats, is set to at least one row in
estimate_path_cost_size(), which isn't correct because if the relation
is a foreign table with tuples=0, the estimate would be set to 0 there
when not using remote estimates.
Per bug #16807 from Alexander Lakhin. Back-patch to v13 where the
aforementioned commit went in.
Author: Etsuro Fujita
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/16807-9fe4e08fbaa5c7ce%40postgresql.org
The ExecutorEnd hook is invoked in a context that could be quite
long-lived, not the executor's own per-query context as I think
we were sort of assuming. Thus, any cruft generated while producing
the EXPLAIN output could accumulate over multiple queries. This can
result in spectacular leakage if log_nested_statements is on, and
even without that I'm surprised nobody complained before.
To fix, just switch into the executor's context so that anything we
allocate will be released when standard_ExecutorEnd frees the executor
state. We might as well nuke the code's retail pfree of the explain
output string, too; that's laughably inadequate to the need.
Japin Li, per report from Jeff Janes. This bug is old, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMkU=1wCVtbeRn0s9gt12KwQ7PLXovbpM8eg25SYocKW3BT4hg@mail.gmail.com
When reporting connection errors, we might show a database name in the
message that's not the one we actually tried to connect to, if the
database was taken from libpq defaults instead of from user parameters.
Fix such error messages to use PQdb(), which reports the correct name.
(But, per commit 2930c05634, make sure not to try to print NULL.)
Apply to branches 9.5 through 13. Branch master has already been
changed differently by commit 58cd8dca3d.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+TgmobssJ6rS22dspWnu-oDxXevGmhMD8VcRBjmj-b9UDqRjw@mail.gmail.com
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
By default VACUUM will skip pages that it can't immediately get
exclusive access to, which means that even activities as harmless
and unpredictable as checkpoint buffer writes might prevent a page
from being processed. Ordinarily this is no big deal, but we have
a small number of test cases that examine the results of VACUUM's
processing and therefore will fail if the page of interest is skipped.
This seems to be the explanation for some rare buildfarm failures.
To fix, add the DISABLE_PAGE_SKIPPING option to the VACUUM commands
in tests where this could be an issue.
In passing, remove a duplicated query in pageinspect/sql/page.sql.
Back-patch as necessary (some of these cases are as old as v10).
Discussion: https://postgr.es/m/413923.1611006484@sss.pgh.pa.us
In postgres_fdw, the cached connections to foreign servers will not be
closed until the local session exits if the user mappings or foreign servers
that those connections depend on are dropped. Those connections can be
leaked.
To fix that connection leak issue, after a change to a pg_foreign_server
or pg_user_mapping catalog entry, this commit makes postgres_fdw close
the connections depending on that entry immediately if current
transaction has not used those connections yet. Otherwise, mark those
connections as invalid and then close them at the end of current transaction,
since they cannot be closed in the midst of the transaction using them.
Closed connections will be remade at the next opportunity if necessary.
Back-patch to all supported branches.
Author: Bharath Rupireddy
Reviewed-by: Zhihong Yu, Zhijie Hou, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVNcGH_6qLY-4_tXz8JLvA+4yeBThRfxMz7Oxbk1aHcpQ@mail.gmail.com
If a database shutdown (smart or fast) is commanded between the time
some process decides to request a new background worker and the time
that the postmaster can launch that worker, then nothing happens
because the postmaster won't launch any bgworkers once it's exited
PM_RUN state. This is fine ... unless the requesting process is
waiting for that worker to finish (or even for it to start); in that
case the requestor is stuck, and only manual intervention will get us
to the point of being able to shut down.
To fix, cancel pending requests for workers when the postmaster sends
shutdown (SIGTERM) signals, and similarly cancel any new requests that
arrive after that point. (We can optimize things slightly by only
doing the cancellation for workers that have waiters.) To fit within
the existing bgworker APIs, the "cancel" is made to look like the
worker was started and immediately stopped, causing deregistration of
the bgworker entry. Waiting processes would have to deal with
premature worker exit anyway, so this should introduce no bugs that
weren't there before. We do have a side effect that registration
records for restartable bgworkers might disappear when theoretically
they should have remained in place; but since we're shutting down,
that shouldn't matter.
Back-patch to v10. There might be value in putting this into 9.6
as well, but the management of bgworkers is a bit different there
(notably see 8ff518699) and I'm not convinced it's worth the effort
to validate the patch for that branch.
Discussion: https://postgr.es/m/661570.1608673226@sss.pgh.pa.us
Bad things happen if the DBA issues "pg_ctl stop -m fast" before
autoprewarm finishes loading its list of blocks to prewarm.
The current worker process successfully terminates early, but
(if this wasn't the last database with blocks to prewarm) the
leader process will just try to launch another worker for the
next database. Since the postmaster is now in PM_WAIT_BACKENDS
state, it ignores the launch request, and the leader just sits
until it's killed manually.
This is mostly the fault of our half-baked design for launching
background workers, but a proper fix for that is likely to be
too invasive to be back-patchable. To ameliorate the situation,
fix apw_load_buffers() to check whether SIGTERM has arrived
just before trying to launch another worker. That leaves us with
only a very narrow window in each worker launch where SIGTERM
could occur between the launch request and successful worker start.
Another issue is that if the leader process does manage to exit,
it unconditionally rewrites autoprewarm.blocks with only the
blocks currently in shared buffers, thus forgetting any blocks
that we hadn't reached yet while prewarming. This seems quite
unhelpful, since the next database start will then not have the
expected prewarming benefit. Fix it to not modify the file if
we shut down before the initial load attempt is complete.
Per bug #16785 from John Thompson. Back-patch to v11 where
the autoprewarm code was introduced.
Discussion: https://postgr.es/m/16785-c0207d8c67fb5f25@postgresql.org
The following routines are called within pgcrypto when handling digests
but there were no checks for failures:
- EVP_MD_CTX_size (can fail with -1 as of 3.0.0)
- EVP_MD_CTX_block_size (can fail with -1 as of 3.0.0)
- EVP_DigestInit_ex
- EVP_DigestUpdate
- EVP_DigestFinal_ex
A set of elog(ERROR) is added by this commit to detect such failures,
that should never happen except in the event of a processing failure
internal to OpenSSL.
Note that it would be possible to use ERR_reason_error_string() to get
more context about such errors, but these refer mainly to the internals
of OpenSSL, so it is not really obvious how useful that would be. This
is left out for simplicity.
Per report from Coverity. Thanks to Tom Lane for the discussion.
Backpatch-through: 9.5
Whether from size overflow in gistSplit or from secondary splits,
picksplit is (rarely) called with exactly two items to split.
Formerly, due to special-case handling of the last item, this would
lead to access to an uninitialized cache entry; prior to PG 13 this
might have been harmless or at worst led to an incorrect union datum,
but in 13 onwards it can cause a backend crash from using an
uninitialized pointer.
Repair by removing the special case, which was deemed not to have been
appropriate anyway. Backpatch all the way, because this bug has
existed since pg_trgm was added.
Per report on IRC from user "ftzdomino". Analysis and testing by me,
patch from Alexander Korotkov.
Discussion: https://postgr.es/m/87k0usfdxg.fsf@news-spur.riddles.org.uk
911e702077 has introduced the opclass parameters including signature length
for a set of GiST opclasses. Due to copy-pasting, macro for getting the
signature length in trgm_gist.c was named LTREE_GET_ASIGLEN(). Fix that by
renaming this macro to just GET_SIGLEN().
Backpatch-through: 13