As per discussion with Peter Eisentraunt, the SQL standard specifies
that any tuple insertion done as part of CREATE TABLE AS happens without
any extra ACL check, so it makes little sense to keep a check for INSERT
privileges when using WITH DATA. Materialized views are not part of the
standard, but similarly, this check can be confusing as this refers to
an access check on a table created within the same command as the one
that would insert data into this table.
This commit removes the INSERT privilege check for WITH DATA, the
default, that 846005e removed partially, but only for WITH NO DATA.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/d049c272-9a47-d783-46b0-46665b011598@enterprisedb.com
When specified, WITH NO DATA does not insert any data into the relation
created, so skip checking for the insert permissions. With WITH DATA or
WITH NO DATA, it is always required for the user to have CREATE
privileges on the schema targeted for the relation.
Note that plain CREATE TABLE AS or CREATE MATERIALIZED VIEW queries have
begun to work accidentally without INSERT privilege checks as of
874fe3ae, while using EXECUTE or EXPLAIN ANALYZE would fail with the ACL
check, so this makes the behavior for all the command flavors consistent
with each other. This is arguably a bug fix, but there have been no
complaints about the current behavior either so stable branches are not
changed.
While on it, document properly the privileges requirements for each
commands with more tests for all the scenarios possible, and avoid a
useless bulk-insert allocation when using WITH NO DATA.
Author: Bharath Rupireddy
Reviewed-by: Anastasia Lubennikova, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACWc3N8j0_9nMPz9wcAUnVcdKHzFdDZJ3hVFNEbqtcyG9w@mail.gmail.com
SQL commands are generally marked up as <command>, except when a link
to a reference page is used using <xref>. But the latter doesn't
create monospace markup, so this looks strange especially when a
paragraph contains a mix of links and non-links.
We considered putting <command> in the <refentrytitle> on the target
side, but that creates some formatting side effects elsewhere.
Generally, it seems safer to solve this on the link source side.
We can't put the <xref> inside the <command>; the DTD doesn't allow
this. DocBook 5 would allow the <command> to have the linkend
attribute itself, but we are not there yet.
So to solve this for now, convert the <xref>s to <link> plus
<command>. This gives the correct look and also gives some more
flexibility what we can put into the link text (e.g., subcommands or
other clauses). In the future, these could then be converted to
DocBook 5 style.
I haven't converted absolutely all xrefs to SQL command reference
pages, only those where we care about the appearance of the link text
or where it was otherwise appropriate to make the appearance match a
bit better. Also in some cases, the links where repetitive, so in
those cases the links where just removed and replaced by a plain
<command>. In cases where we just want the link and don't
specifically care about the generated link text (typically phrased
"for further information see <xref ...>") the xref is kept.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/87o8pco34z.fsf@wibble.ilmari.org
Use xreflabel attributes instead of endterm attributes to control the
appearance of links to subsections of SQL command reference pages.
This is simpler, it matches what we do elsewhere (e.g. for GUC variables),
and it doesn't draw "Unresolved ID reference" warnings from the PDF
toolchain.
Fix some places where the text was absolutely dependent on an <xref>
rendering exactly so, by using a <link> around the required text
instead. At least one of those spots had already been turned into
bad grammar by subsequent changes, and the whole idea is just too
fragile for my taste. <xref> does NOT have fixed output, don't write
as if it does.
Consistently include a page-level link in cross-man-page references,
because otherwise they are useless/nonsensical in man-page output.
Likewise, be consistent about mentioning "below" or "above" in same-page
references; we were doing that in about 90% of the cases, but now it's
100%.
Also get rid of another nonfunctional-in-PDF idea, of making
cross-references to functions by sticking ID tags on <row> constructs.
We can put the IDs on <indexterm>s instead --- which is probably not any
more sensible in abstract terms, but it works where the other doesn't.
(There is talk of attaching cross-reference IDs to most or all of
the docs' function descriptions, but for now I just fixed the two
that exist.)
Discussion: https://postgr.es/m/14480.1589154358@sss.pgh.pa.us
This adds documentation about the user oriented parts of table access
methods (i.e. the default_table_access_method GUC and the USING clause
for CREATE TABLE etc), adds a basic chapter about the table access
method interface, and adds a note to storage.sgml that it's contents
don't necessarily apply for non-builtin AMs.
Author: Haribabu Kommi and Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Since some preparation work had already been done, the only source
changes left were changing empty-element tags like <xref linkend="foo">
to <xref linkend="foo"/>, and changing the DOCTYPE.
The source files are still named *.sgml, but they are actually XML files
now. Renaming could be considered later.
In the build system, the intermediate step to convert from SGML to XML
is removed. Everything is build straight from the source files again.
The OpenSP (or the old SP) package is no longer needed.
The documentation toolchain instructions are updated and are much
simpler now.
Peter Eisentraut, Alexander Lakhin, Jürgen Purtz
IDs in SGML are case insensitive, and we have accumulated a mix of upper
and lower case IDs, including different variants of the same ID. In
XML, these will be case sensitive, so we need to fix up those
differences. Going to all lower case seems most straightforward, and
the current build process already makes all anchors and lower case
anyway during the SGML->XML conversion, so this doesn't create any
difference in the output right now. A future XML-only build process
would, however, maintain any mixed case ID spellings in the output, so
that is another reason to clean this up beforehand.
Author: Alexander Lakhin <exclusion@gmail.com>
For DocBook XML compatibility, don't use SGML empty tags (</>) anymore,
replace by the full tag name. Add a warning option to catch future
occurrences.
Alexander Lakhin, Jürgen Purtz
DocBook XML is superficially compatible with DocBook SGML but has a
slightly stricter DTD that we have been violating in a few cases.
Although XSLT doesn't care whether the document is valid, the style
sheets don't necessarily process invalid documents correctly, so we need
to work toward fixing this.
This first commit moves the indexterms in refentry elements to an
allowed position. It has no impact on the output.
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
Aside from adjusting the documentation to say that these are deprecated,
we now report a warning (not an error) for use of GLOBAL, since it seems
fairly likely that we might change that to request SQL-spec-compliant temp
table behavior in the foreseeable future. Although our handling of LOCAL
is equally nonstandard, there is no evident interest in ever implementing
SQL modules, and furthermore some other products interpret LOCAL as
behaving the same way we do. So no expectation of change and no warning
for LOCAL; but it still seems a good idea to deprecate writing it.
Noah Misch
The WITH [NO] DATA option was not supported, nor the ability to specify
replacement column names; the former limitation wasn't even documented, as
per recent complaint from Naoya Anzai. Fix by moving the responsibility
for supporting these options into the executor. It actually takes less
code this way ...
catversion bump due to change in representation of IntoClause, which might
affect stored rules.
There is what may actually be a mistake in our markup. The problem is
in a situation like
<para>
<command>FOO</command> is ...
there is strictly speaking a line break before "FOO". In the HTML
output, this does not appear to be a problem, but in the man page
output, this shows up, so you get double blank lines at odd places.
So far, we have attempted to work around this with an XSL hack, but
that causes other problems, such as creating run-ins in places like
<acronym>SQL</acronym> <command>COPY</command>
So fix the problem properly by removing the extra whitespace. I only
fixed the problems that affect the man page output, not all the
places.
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
The endterm attribute is mainly useful when the toolchain does not support
automatic link target text generation for a particular situation. In the
past, this was required by the man page tools for all reference page links,
but that is no longer the case, and it now actually gets in the way of
proper automatic link text generation. The only remaining use cases are
currently xrefs to refsects.
another section if required by the platform (instead of the old way of
building them in section "l" and always transforming them to the
platform-specific section).
This speeds up the installation on common platforms, and it avoids some
funny business with the man page tools and build process.
tablespace(s) in which to store temp tables and temporary files. This is a
list to allow spreading the load across multiple tablespaces (a random list
element is chosen each time a temp object is to be created). Temp files are
not stored in per-database pgsql_tmp/ directories anymore, but per-tablespace
directories.
Jaime Casanova and Albert Cervera, with review by Bernd Helmle and Tom Lane.
SGML markup, add a "deprecated features" section to the 8.0 release
notes, untabify release.sgml and runtime.sgml, and make some other
minor improvements.
intended to allow application authors to insulate themselves from
changes to the default value of 'default_with_oids' in future releases
of PostgreSQL.
This patch also fixes a bug in the earlier implementation of the
'default_with_oids' GUC variable: code in gram.y should not examine
the value of GUC variables directly due to synchronization issues.
proposal for eventually deprecating OIDs on user tables that I posted
earlier to pgsql-hackers. pg_dump now always specifies WITH OIDS or
WITHOUT OIDS when dumping a table. The documentation has been updated.
Neil Conway
Bruce Momjian
Michael Paquier
Peter Eisentraut
Tom Lane
Amit Kapila
Thomas Munro
Andres Freund
Peter Eisentraut
Andrew Dunstan
Kevin Grittner
Robert Haas
Magnus Hagander
Neil Conway
PostgreSQL Daemon