It also works to create a non-polymorphic aggregate from polymorphic
functions, should you want to do that. Regression test added, docs still
lacking. By Joe Conway, with some kibitzing from Tom Lane.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
comparison functions), replacing the highly bogus bitwise array_eq. Create
a btree index opclass for ANYARRAY --- it is now possible to create indexes
on array columns.
Arrange to cache the results of catalog lookups across multiple array
operations, instead of repeating the lookups on every call.
Add string_to_array and array_to_string functions.
Remove singleton_array, array_accum, array_assign, and array_subscript
functions, since these were for proof-of-concept and not intended to become
supported functions.
Minor adjustments to behavior in some corner cases with empty or
zero-dimensional arrays.
Joe Conway (with some editorializing by Tom Lane).
HH:MM:SS.SSS... when there is a nonzero part-of-a-day field in an
interval value. The seconds part used to be suppressed if zero,
but there's no equivalent behavior for timestamp, and since we're
modeling this format on timestamp it's probably wrong. Per complaint
and patch from Larry Rosenman.
- LIKE <subtable> [ INCLUDING DEFAULTS | EXCLUDING DEFAULTS ]
- Quick cleanup of analyze.c function prototypes.
- New non-reserved keywords (INCLUDING, EXCLUDING, DEFAULTS), SQL 200X
Opted not to extend for check constraints at this time.
As per the definition that it's user defined columns, OIDs are NOT
inherited.
Doc and Source patches attached.
--
Rod Taylor <rbt@rbt.ca>
Regression tests for IPv6 operations added.
Documentation updated to document IPv6 bits.
Stop treating IPv4 as an "unsigned int" and IPv6 as an array of
characters. Instead, always use the array of characters so we
can have one function fits all. This makes bitncmp(), addressOK(),
and several other functions "just work" on both address families.
add family() function which returns integer 4 or 6 for IPv4 or
IPv6. (See examples below) Note that to add this new function
you will need to dump/initdb/reload or find the correct magic
to add the function to the postgresql function catalogs.
IPv4 addresses always sort before IPv6.
On disk we use AF_INET for IPv4, and AF_INET+1 for IPv6 addresses.
This prevents the need for a dump and reload, but lets IPv6 parsing
work on machines without AF_INET6.
To select all IPv4 addresses from a table:
select * from foo where family(addr) = 4 ...
Order by and other bits should all work.
Michael Graff
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
dropped. The simplest fix for INSERT/UPDATE cases turns out to be for
preptlist.c to insert NULLs of a known-good type (I used INT4) rather
than making them match the deleted column's type. Since the representation
of NULL is actually datatype-independent, this should work fine.
I also re-reverted the patch to disable the use_physical_tlist optimization
in the presence of dropped columns. It still doesn't look worth the
trouble to be smarter, if there are no other bugs to fix.
Added a regression test to catch future problems in this area.
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
with variable-width fields. No more truncation of long user names.
Also, libpq can now send its environment-variable-driven SET commands
as part of the startup packet, saving round trips to server.
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
on UPDATE.
This get's rid of the long standing annoyance that updating a row
that has foreign keys locks all the referenced rows even if the
foreign key values do not change.
The trick is to actually do a check identical to NO ACTION after an
eventually done UPDATE in the SET DEFAULT case. Since a SET DEFAULT
operation should have moved referencing rows to a new "home", a following
NO ACTION check can only fail if the column defaults of the referencing
table resulted in the key we actually deleted. Thanks to Stephan.
Jan
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
them as arrays of the internal datatype. This requires treating the
stavalues columns as 'anyarray' rather than 'text[]', which is not 100%
kosher but seems to work fine for the purposes we need for pg_statistic.
Perhaps in the future 'anyarray' will be allowed more generally.
some of the algorithms for higher functions. I see about a factor of ten
speedup on the 'numeric' regression test, but it's unlikely that that test
is representative of real-world applications.
initdb forced due to change of on-disk representation for NUMERIC.
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
what is capable using integer-datatime timestamps. It does attempt
to exercise the maximum allowable timestamp range.
Also is a small error check when converting a timestamp from external
to internal format that prevents out of range timestamps from being
entered.
Files patched:
Index: src/backend/utils/adt/timestamp.c
Added range check to prevent out of range timestamps
from being used.
Index: src/test/regress/sql/horology.sql
Index: src/test/regress/expected/horology-no-DST-before-1970.out
Index: src/test/regress/expected/horology-solaris-1947.out
Limited range of timestamps being checked to
Jan 1, 4713 BC to Dec 31, 294276
In creating this patch, I have seen some definite problems with integer
timestamps and how they react when used near their limits. For example,
the following statement gives the correct result:
SELECT timestamp without time zone 'Jan 1, 4713 BC'
+ interval '109203489 days' AS "Dec 31, 294276";
However, this statement which is the logical inverse of the above
gives incorrect results:
SELECT timestamp without time zone '12/31/294276'
- timestamp without time zone 'Jan 1, 4713 BC' AS "109203489 Days";
John Cochran
