Give away ownership of shared objects (databases, tablespaces) along
with local objects, per original code intention. Try to make the
documentation clearer, too.
Per discussion about DROP OWNED's brokenness, in bug #7748.
This is not backpatched because it'd require some refactoring of the
ALTER/SET OWNER code for databases and tablespaces.
My "fix" for bugs #7578 and #6116 on DROP OWNED at fe3b5eb08a not only
misstated that it applied to REASSIGN OWNED (which it did not affect),
but it also failed to fix the problems fully, because I didn't test the
case of owned shared objects. Thus I created a new bug, reported by
Thomas Kellerer as #7748, which would cause DROP OWNED to fail with a
not-for-user-consumption error message. The code would attempt to drop
the database, which not only fails to work because the underlying code
does not support that, but is a pretty dangerous and undesirable thing
to be doing as well.
This patch fixes that bug by having DROP OWNED only attempt to process
shared objects when grants on them are found, ignoring ownership.
Backpatch to 8.3, which is as far as the previous bug was backpatched.
The SQL standard does not have general functions-in-FROM, but it does
allow UNNEST() there (see the <collection derived table> production),
and the semantics of that are defined to include lateral references.
So spec compliance requires allowing lateral references within UNNEST()
even without an explicit LATERAL keyword. Rather than making UNNEST()
a special case, it seems best to extend this flexibility to any
function-in-FROM. We'll still allow LATERAL to be written explicitly
for clarity's sake, but it's now a noise word in this context.
In theory this change could result in a change in behavior of existing
queries, by allowing what had been an outer reference in a function-in-FROM
to be captured by an earlier FROM-item at the same level. However, all
pre-9.3 PG releases have a bug that causes them to match variable
references to earlier FROM-items in preference to outer references (and
then throw an error). So no previously-working query could contain the
type of ambiguity that would risk a change of behavior.
Per a suggestion from Andrew Gierth, though I didn't use his patch.
Previously non-honored FREEZE mode was ignored. This also issues an
appropriate error message based on the cause of the failure, per
suggestion from Tom. Additional regression test case added.
In the initial implementation of plan caching, we saved the active
search_path when a plan was first cached, then reinstalled that path
anytime we needed to reparse or replan. The idea of that was to try to
reselect the same referenced objects, in somewhat the same way that views
continue to refer to the same objects in the face of schema or name
changes. Of course, that analogy doesn't bear close inspection, since
holding the search_path fixed doesn't cope with object drops or renames.
Moreover sticking with the old path seems to create more surprises than
it avoids. So instead of doing that, consider that the cached plan depends
on search_path, and force reparse/replan if the active search_path is
different than it was when we last saved the plan.
This gets us fairly close to having "transparency" of plan caching, in the
sense that the cached statement acts the same as if you'd just resubmitted
the original query text for another execution. There are still some corner
cases where this fails though: a new object added in the search path
schema(s) might capture a reference in the query text, but we'd not realize
that and force a reparse. We might try to fix that in the future, but for
the moment it looks too expensive and complicated.
Previously, the VARIADIC labeling was effectively ignored, but now these
functions act as though the array elements had all been given as separate
arguments.
Pavel Stehule
Since 9.0, the count parameter has only limited the number of tuples
actually returned by the executor. It doesn't affect the behavior of
INSERT/UPDATE/DELETE unless RETURNING is specified, because without
RETURNING, the ModifyTable plan node doesn't return control to execMain.c
for each tuple. And we only check the limit at the top level.
While this behavioral change was unintentional at the time, discussion of
bug #6572 led us to the conclusion that we prefer the new behavior anyway,
and so we should just adjust the docs to match rather than change the code.
Accordingly, do that. Back-patch as far as 9.0 so that the docs match the
code in each branch.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
Remove extra line at bottom of table for new 'latex' mode border=3.
Also update 'latex'-longtable 'tableattr' docs to say
'whitespace-separated' instead of 'space'.
This mirrors the changes done earlier to the server in standby mode. When
receivelog reaches the end of a timeline, as reported by the server, it
fetches the timeline history file of the next timeline, and restarts
streaming from the new timeline by issuing a new START_STREAMING command.
When pg_receivexlog crosses a timeline, it leaves the .partial suffix on the
last segment on the old timeline. This helps you to tell apart a partial
segment left in the directory because of a timeline switch, and a completed
segment. If you just follow a single server, it won't make a difference, but
it can be significant in more complicated scenarios where new WAL is still
generated on the old timeline.
This includes two small changes to the streaming replication protocol:
First, when you reach the end of timeline while streaming, the server now
sends the TLI of the next timeline in the server's history to the client.
pg_receivexlog uses that as the next timeline, so that it doesn't need to
parse the timeline history file like a standby server does. Second, when
BASE_BACKUP command sends the begin and end WAL positions, it now also sends
the timeline IDs corresponding the positions.
On top of the previous support in pg_dump, add support to specify
multiple tables (by using the -t option multiple times) to
pg_restore, clsuterdb, reindexdb and vacuumdb.
Josh Kupershmidt, reviewed by Karl O. Pinc
(-i), producing only one progress message per 5 seconds along with
elapsed time and estimated remaining time. Also add elapsed time and
estimated remaining time to the default logging(prints one message
each 100000 rows).
Patch contributed by Tomas Vondra, reviewed by Jeevan Chalke and
Tatsuo Ishii.
Adds commandline option -R to pg_basebackup that creates a recovery.conf which
enables standby mode using the same parameters that pg_basebackup used to
connect to the master, and writes it into the output directory (or injects it
in the tar file when tar format is used).
Zoltan Boszormenyi, modified by Magnus Hagander, reviewed by Amit Kapila & Fujii Masao
SPI_execute() and related functions create a CachedPlan, execute it once,
and immediately discard it, so that the functionality offered by
plancache.c is of no value in this code path. And performance measurements
show that the extra data copying and invalidation checking done by
plancache.c slows down simple queries by 10% or more compared to 9.1.
However, enough of the SPI code is shared with functions that do need plan
caching that it seems impractical to bypass plancache.c altogether.
Instead, let's invent a variant version of cached plans that preserves
99% of the API but doesn't offer any of the actual functionality, nor the
overhead. This puts SPI_execute() performance back on par, or maybe even
slightly better, than it was before. This change should resolve recent
complaints of performance degradation from Dong Ye, Pavel Stehule, and
others.
By avoiding data copying, this change also reduces the amount of memory
needed to execute many-statement SPI_execute() strings, as for instance in
a recent complaint from Tomas Vondra.
An additional benefit of this change is that multi-statement SPI_execute()
query strings are now processed fully serially, that is we complete
execution of earlier statements before running parse analysis and planning
on following ones. This eliminates a long-standing POLA violation, in that
DDL that affects the behavior of a later statement will now behave as
expected.
Back-patch to 9.2, since this was a performance regression compared to 9.1.
(In 9.2, place the added struct fields so as to avoid changing the offsets
of existing fields.)
Heikki Linnakangas and Tom Lane
Code review for commit 2f582f76b1945929ff07116cd4639747ce9bb8a1: don't use
a static variable for what ought to be a deparse_context field, fix
non-multibyte-safe test for spaces, avoid useless and potentially O(N^2)
(though admittedly with a very small constant) calculations of wrap
positions when we aren't going to wrap.
If pg_extension_config_dump() is executed again for a table already listed
in the extension's extconfig, the code was blindly making a new array entry.
This does not seem useful. Fix it to replace the existing array entry
instead, so that it's possible for extension update scripts to alter the
filter conditions for configuration tables.
In addition, teach ALTER EXTENSION DROP TABLE to check for an extconfig
entry for the target table, and remove it if present. This is not a 100%
solution because it's allowed for an extension update script to just
summarily DROP a member table, and that code path doesn't go through
ExecAlterExtensionContentsStmt. We could probably make that case clean
things up if we had to, but it would involve sticking a very ugly wart
somewhere in the guts of dependency.c. Since on the whole it seems quite
unlikely that extension updates would want to remove pre-existing
configuration tables, making the case possible with an explicit command
seems sufficient.
Per bug #7756 from Regina Obe. Back-patch to 9.1 where extensions were
introduced.
Alvaro Herrera
Tom Lane
Bruce Momjian
Robert Haas
Heikki Linnakangas
Magnus Hagander
Simon Riggs
Peter Eisentraut
Tatsuo Ishii