As noted by Noah Misch, btree_xlog_delete_get_latestRemovedXid is
critically dependent on the assumption that it's examining a consistent
state of the database. This was undocumented though, so the
seemingly-unrelated check for no active HS sessions might be thought to be
merely an optional optimization. Improve comments, and add an explicit
check of reachedConsistency just to be sure.
This function returns InvalidTransactionId (thereby killing all HS
transactions) in several cases that are not nearly unlikely enough for my
taste. This commit doesn't attempt to fix those deficiencies, just
document them.
Back-patch to 9.2, not from any real functional need but just to keep the
branches more closely synced to simplify possible future back-patching.
When we allowed read-only transactions to skip assigning XIDs
we introduced the possibility that a fully deleted btree page
could be reused. This broke the index link sequence which could
then lead to indexscans silently returning fewer rows than would
have been correct. The actual incidence of silent errors from
this is thought to be very low because of the exact workload
required and locking pre-conditions. Fix is to remove pages only
if index page opaque->btpo.xact precedes RecentGlobalXmin.
Noah Misch, reviewed by Simon Riggs
Hot Standby conflicts only with tuples that were visible at
some point. So ignore tuples from aborted transactions or for
tuples updated/deleted during the inserting transaction when
generating the conflict transaction ids.
Following detailed analysis and test case by Noah Misch.
Original report covered btree delete records, correctly observed
by Heikki Linnakangas that this applies to other cases also.
Fix covers all sources of cleanup records via common code.
WAL record for btree delete contains a list of tids, even when backup
blocks are present. We follow the tids to their heap tuples, taking
care to follow LP_REDIRECT tuples. We ignore LP_DEAD tuples on the
understanding that they will always have xmin/xmax earlier than any
LP_NORMAL tuples referred to by killed index tuples. Iff all tuples
are LP_DEAD we return InvalidTransactionId. The heap relfilenode is
added to the WAL record, requiring API changes to pass down the heap
Relation. XLOG_PAGE_MAGIC updated.
field into WAL record and reset it from there, rather than using
FrozenTransactionId which can lead to some corner case bugs.
Problem report and suggested route to a fix from Heikki, details by me.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
records for heap and btree. Minor change, mostly API changes to
pass through the required values. This is a simple change though
also provides the refactoring required for further enhancements
to conflict processing using the relOid. Changes only have effect
during Hot Standby.
of this are to centralise the conflict code to allow further change,
as well as to allow passing through the full reason for the conflict
through to the conflicting backends. Backend state alters how we
can handle different types of conflict so this is now required.
As originally suggested by Heikki, no longer optional.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
it failed for splits of non-leaf pages because in such pages the first
data key on a page is suppressed, and so we can't just copy the first
key from the right page to reconstitute the left page's high key.
Problem found by Koichi Suzuki, patch by Heikki.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
than two independent bits (one of which was never used in heap pages anyway,
or at least hadn't been in a very long time). This gives us flexibility to
add the HOT notions of redirected and dead item pointers without requiring
anything so klugy as magic values of lp_off and lp_len. The state values
are chosen so that for the states currently in use (pre-HOT) there is no
change in the physical representation.
WAL records that shows whether it is safe to remove full-page images
(ie, whether or not an on-line backup was in progress when the WAL entry
was made). Also make provision for an XLOG_NOOP record type that can be
used to fill in the extra space when decompressing the data for restore.
This is the portion of Koichi Suzuki's "full page writes" patch that
has to go into the core database. The remainder of that work is two
external compression and decompression programs, which for the time being
will undergo separate development on pgfoundry. Per discussion.
Also, twiddle the handling of BTREE_SPLIT records to ensure it'll be
possible to compress them (the previous coding caused essential info
to be omitted). The other commonly-used record types seem OK already,
with the possible exception of GIN and GIST WAL records, which I don't
understand well enough to opine on.
(original code *always* created a full-page image for the left page, thus
leaving the intended savings unrealized), avoid risk of not having enough room
on the page during xlog restore, squeeze out another couple bytes in the xlog
record, clean up neglected comments.
> Currently, an index split writes all the data on the split page to
> WAL. That's a lot of WAL traffic. The tuples that are copied to the
> right page need to be WAL logged, but the tuples that stay on the
> original page don't.
Heikki Linnakangas
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
deletion code to avoid the case where an upper-level btree page remains "half
dead" for a significant period of time, and to block insertions into a key
range that is in process of being re-assigned to the right sibling of the
deleted page's parent. This prevents the scenario reported by Ed L. wherein
index keys could become out-of-order in the grandparent index level.
Since this is a moderately invasive fix, I'm applying it only to HEAD.
The bug exists back to 7.4, but the back branches will get a different patch.
operation every so often. This improves the usefulness of PITR log
shipping for hot standby: formerly, if the standby server crashed, it
was necessary to restart it from the last base backup and replay all
the WAL since then. Now it will only need to reread about the same
amount of WAL as the master server would. The behavior might also
come in handy during a long PITR replay sequence. Simon Riggs,
with some editorialization by Tom Lane.
When we are about to split an index page to do an insertion, first look
to see if any entries marked LP_DELETE exist on the page, and if so remove
them to try to make enough space for the desired insert. This should reduce
index bloat in heavily-updated tables, although of course you still need
VACUUM eventually to clean up the heap.
Junji Teramoto
into a single mostly-physical-order scan of the index. This requires some
ticklish interlocking considerations, but should create no material
performance impact on normal index operations (at least given the
already-committed changes to make scans work a page at a time). VACUUM
itself should get significantly faster in any index that's degenerated to a
very nonlinear page order. Also, we save one pass over the index entirely,
except in the case where there were no deletions to do and so only one pass
happened anyway.
Original patch by Heikki Linnakangas, rework by Tom Lane.
upper-level insertion completes a previously-seen split, we cannot simply grab
the downlink block number out of the buffer, because the buffer could contain
a later state of the page --- or perhaps the page doesn't even exist at all
any more, due to relation truncation. These possibilities have been masked up
to now because the use of full_page_writes effectively ensured that no xlog
replay routine ever actually saw a page state newer than its own change.
Since we're deprecating full_page_writes in 8.1.*, there's no need to fix this
in existing release branches, but we need a fix in HEAD if we want to have any
hope of re-allowing full_page_writes. Accordingly, adjust the contents of
btree WAL records so that we can always get the downlink block number from the
WAL record rather than having to depend on buffer contents. Per report from
Kevin Grittner and Peter Brant.
Improve a few comments in related code while at it.
incrementally by successive inserts rather than by sorting the data.
We were only using the slow path during bootstrap, apparently because
when first written it failed during bootstrap --- but it works fine now
AFAICT. Removing it saves a hundred or so lines of code and produces
noticeably (~10%) smaller initial states of the system catalog indexes.
While that won't make much difference for heavily-modified catalogs,
for the more static ones there may be a useful long-term performance
improvement.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
passed extend = true whenever we are reading a page we intend to reinitialize
completely, even if we think the page "should exist". This is because it
might indeed not exist, if the relation got truncated sometime after the
current xlog record was made and before the crash we're trying to recover
from. These two thinkos appear to explain both of the old bug reports
discussed here:
http://archives.postgresql.org/pgsql-hackers/2005-05/msg01369.php