While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
Commit 482675987 introduced "run_as_owner" subscription option so that
subscription runs with either the permissions of the subscription
owner or the permission of the table owner. However, tablesync workers
did not use this option for the initial data copy.
With this change, tablesync workers run with appropriate permissions
based on "run_as_owner" option.
Ajin Cherian, with changes and regression tests added by me.
Reported-By: Amit Kapila
Author: Ajin Cherian, Masahiko Sawada
Reviewed-by: Ajin Cherian, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1L=qzRHPEn+qeMoKQGFBzqGoLBzt_ov0A89iFFiut+ppA@mail.gmail.com
A placeholder that references the outer join's relid in ph_eval_at
is logically "above" the join, and therefore we can't remove its
PlaceHolderInfo: it might still be used somewhere in the query.
This was not an issue pre-v16 because we failed to remove the join
at all in such cases. The new outer-join-aware-Var infrastructure
permits deducing that it's okay to remove the join, but then we
have to clean up correctly afterwards.
Report and fix by Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_tuVn9EwwMcggGiZJWWstdXX_ci8FeEU17vs+4nLgw3w@mail.gmail.com
Apparently some extensions are in the habit of calling
ChangeVarNodes() with INDEX_VAR as the rt_index to replace.
That worked before 2489d76c4, at least as long as there were
not PlaceHolderVars in the expression; but now it fails
because bms_is_member spits up. Add a test to avoid that.
Per report from Anton Melnikov, though this is not his
proposed patch.
Discussion: https://postgr.es/m/5b370a46-f6d2-373d-9dbc-0d55250e82c1@inbox.ru
pg_base64_enc_len() and its clones overestimated the output
length by up to 2 bytes, as a result of sloppy thinking about
where to divide. No callers require a precise estimate, so
this has no consequences worse than palloc'ing a byte or two
more than necessary. We might as well get it right though.
This bug is very ancient, dating to commit 79d78bb26 which
added encode.c. (The other instances were presumably copied
from there.) Still, it doesn't quite seem worth back-patching.
Oleg Tselebrovskiy
Discussion: https://postgr.es/m/f94da55286a63022150bc266afdab754@postgrespro.ru
Commit fc22b6623b (generated columns) replaced ExecGetUpdatedCols() with
ExecGetAllUpdatedCols() in a couple places handling UPDATE (triggers and
lock mode). However, ExecGetUpdatedCols() did exec_rt_fetch() while
ExecGetAllUpdatedCols() also allocates memory through bms_union()
without paying attention to the memory context and happened to use the
long-lived ExecutorState, leaking the memory until the end of the query.
The amount of leaked memory is proportional to the number of (updated)
attributes, types of UPDATE triggers, and the number of processed rows
(which for UPDATE ... FROM ... may be much higher than updated rows).
Fixed by switching to the per-tuple context in GetAllUpdatedColumns().
This is fine for all in-core callers, but external callers may need to
copy the result. But we're not aware of any such callers.
Note the issue was introduced by fc22b6623b, but the macros were later
renamed by f50e888990.
Backpatch to 12, where the issue was introduced.
Reported-by: Tomas Vondra
Reviewed-by: Andres Freund, Tom Lane, Jakub Wartak
Backpatch-through: 12
Discussion: https://postgr.es/m/222a3442-7f7d-246c-ed9b-a76209d19239@enterprisedb.com
The GUC settings lc_collate and lc_ctype are from a time when those
locale settings were cluster-global. When those locale settings were
made per-database (PG 8.4), the settings were kept as read-only. As
of PG 15, you can use ICU as the per-database locale provider, so
examining these settings is already less meaningful and possibly
confusing, since you need to look into pg_database to find out what is
really happening, and they would likely become fully obsolete in the
future anyway.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/696054d1-bc88-b6ab-129a-18b8bce6a6f0@enterprisedb.com
The apply worker was not reloading the configuration while processing
messages if there is a continuous flow of messages from upstream. It was
also not reloading the configuration if there is a change in the
configuration after it has waited for the message and before receiving the
new replication message. This can lead to failure in tests because we
expect that after reload, the behavior of apply worker to respect the
changed GUCs.
We found this while analyzing a rare buildfarm failure.
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB5716AF9079CC0755CD015322947E9@OS0PR01MB5716.jpnprd01.prod.outlook.com
When we're deleting a no-op LEFT JOIN from the query, we must remove
the join's joinclauses from surviving relations' joininfo lists.
The invention of "cloned" clauses in 2489d76c4 broke the logic for
that; it'd fail to remove clones that include OJ relids outside the
doomed join's min relid sets, which could happen if that join was
previously discovered to commute with some other join.
This accidentally failed to cause problems in the majority of cases,
because we'd never decide that such a cloned clause was evaluatable at
any surviving join. However, Richard Guo discovered a case where that
did happen, leading to "no relation entry for relid" errors later.
Also, adding assertions that a non-removed clause contains no Vars from
the doomed join exposes that there are quite a few existing regression
test cases where the problem happens but is accidentally not exposed.
The fix for this is just to include the target join's commute_above_r
and commute_below_l sets in the relid set we test against when
deciding whether a join clause is "pushed down" and thus not
removable.
While at it, do a little refactoring: the join's relid set can be
computed inside remove_rel_from_query rather than in the caller.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/CAMbWs4_PHrRqTKDNnTRsxxQy6BtYCVKsgXm1_gdN2yQ=kmcO5g@mail.gmail.com
Avoid "right sibling's left-link doesn't match" errors when vacuuming a
corrupt nbtree index. Just LOG the issue and press on. That way VACUUM
will have a decent chance of finishing off all required processing for
the index (and for the table as a whole).
This error was seen in the field from time to time (it's more than a
theoretical risk), so giving VACUUM the ability to press on like this
has real value. Nothing short of a REINDEX is expected to fix the
underlying index corruption, so giving up (by throwing an error) risks
making a bad situation far worse. Anything that blocks forward progress
by VACUUM like this might go unnoticed for a long time. This could
eventually lead to a wraparound/xidStopLimit outage.
Note that _bt_unlink_halfdead_page() has always been able to bail on
page deletion when the target page's left sibling page was in an
inconsistent state. It now does the same thing (returns false to back
out of the second phase of deletion) when it notices sibling link
corruption in the target page's right sibling page.
This is similar to the work from commit 5b861baa (later backpatched as
commit 43e409ce), which taught nbtree to press on with vacuuming an
index when page deletion fails to "re-find" a downlink in the target
page's parent page. The "re-find" check seems to make VACUUM bail on
page deletion more often in practice, but there is no reason to take any
chances here.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wzko2q2kP1+UvgJyP9g0mF4hopK0NtQZcxwvMv9_ytGhkQ@mail.gmail.com
Backpatch: 11- (all supported versions).
We've had multiple issues with the clause_is_computable_at logic that
I introduced in 2489d76c4: it's been known to accept more than one
clone of the same qual at the same plan node, and also to accept no
clones at all. It's looking impractical to get it 100% right on the
basis of the currently-stored information, so fix it by introducing a
new RestrictInfo field "incompatible_relids" that explicitly shows
which outer joins a given clone mustn't be pushed above.
In principle we could populate this field in every RestrictInfo, but
that would cost space and there doesn't presently seem to be a need
for it in general. Also, while deconstruct_distribute_oj_quals can
easily fill the field with the remaining members of the commutative
join set that it's considering, computing it in the general case
seems again pretty complicated. So for now, just fill it for
clone quals.
Along the way, fix a bug that may or may not be only latent:
equivclass.c was generating replacement clauses with is_pushed_down
and has_clone/is_clone markings that didn't match their
required_relids. This led me to conclude that leaving the clone flags
out of make_restrictinfo's purview wasn't such a great idea after all,
so add them.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs48EYi_9-pSd0ORes1kTmTeAjT4Q3gu49hJtYCbSn2JyeA@mail.gmail.com
This file could be in the current (build) directory if we just
built it. However, when installing from a VPATH build from a
tarball, it will exist in the source directory and gmake will
therefore not rebuild it. Use the $< macro to find out where
gmake found it.
Oversight in b3a0d8324, which also exposes a buildfarm testing gap:
we test install from VPATH builds from bare source trees, but not
from tarballs.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/ZGzEAqjxkkoY3ooH@msg.df7cb.de
Use the clause's required_relids not clause_relids for testing
whether it is computable at the current join level, if it is a
clone clause generated by deconstruct_distribute_oj_quals().
Arguably, this is more correct and we should do it for all clauses;
that would at least remove the handwavy claim that we are doing
it to save cycles compared to inspecting Vars individually.
However, attempting to do that exposes that we are not being careful
to compute an accurate value for required_relids in all cases.
I'm unsure whether it's a good idea to attempt to do that for v16,
or leave it as future clean-up. In the meantime, this quick hack
demonstrably fixes some cases, so let's squeeze it in for beta1.
Patch by me, but great thanks to Richard Guo for investigation
and testing. The new test cases are all modeled on his examples.
Discussion: https://postgr.es/m/CAMbWs4-_vwkBij4XOQ5ukxUvLgwTm0kS5_DO9CicUeKbEfKjUw@mail.gmail.com
The assertion checked that the size of the relation is not "too large" - but
the code is explicitly dealing with the possibility of another backend
extending the relation concurrently. In that case the new relation size could
be bigger than what the current backend needs, wrongly triggering an assertion
failure.
Unfortunately it is hard to write a reliable and affordable regression tests
for this, as a lot of concurrency is needed to encounter the bug.
Introduced in 31966b151e.
Reported-by: Melanie Plageman <melanieplageman@gmail.com>
WalSndWakeup() currently loops through all the walsenders slots, with a
spinlock acquisition and release for every iteration, to wake up waiting
walsenders.
This commonly was not a problem before e101dfac3a. But, to allow logical
decoding on standbys, we need to wake up logical walsenders after every WAL
record is applied on the standby, rather just when flushing WAL or switching
timelines. This causes a performance regression for workloads replaying a lot
of WAL records.
To solve this, we use condition variable (CV) to efficiently wake up
walsenders in WalSndWakeup().
Every walsender prepares to sleep on a shared memory CV. Note that it just
prepares to sleep on the CV (i.e., adds itself to the CV's waitlist), but does
not actually wait on the CV (IOW, it never calls ConditionVariableSleep()). It
still uses WaitEventSetWait() for waiting, because CV infrastructure doesn't
handle FeBe socket events currently. The processes (startup process,
walreceiver etc.) wanting to wake up walsenders use
ConditionVariableBroadcast(), which in turn calls SetLatch(), helping
walsenders come out of WaitEventSetWait().
We use separate shared memory CVs for physical and logical walsenders for
selective wake ups, see WalSndWakeup() for more details.
This approach is simple and reasonably efficient. But not very elegant. But
for 16 it seems to be a better path than a larger redesign of the CV
mechanism. A desirable future improvement would be to add support for CVs
into WaitEventSetWait().
This still leaves us with a small regression in very extreme workloads (due to
the spinlock acquisition in ConditionVariableBroadcast() when there are no
waiters) - but that seems acceptable.
Reported-by: Andres Freund <andres@anarazel.de>
Suggested-by: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Discussion: https://www.postgresql.org/message-id/20230509190247.3rrplhdgem6su6cg%40awork3.anarazel.de
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
In commit 9df8f903e I (tgl) switched join_is_removable() from
using the min relid sets of the join under consideration to
using its full syntactic relid sets. This was a mistake,
as it allowed join removal in cases where a reference to the
join output would survive in some syntactically-lower join
condition. Revert to the former coding.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-EU9uBGSP7G-iTwLBhRQ=rnZKvFDhD+n+xhajokyPCKg@mail.gmail.com
The idea of EvalPlanQual is that we replace the query's scan of the
result relation with a single injected tuple, and see if we get a
tuple out, thereby implying that the injected tuple still passes the
query quals. (In join cases, other relations in the query are still
scanned normally.) This logic was not updated when commit 86dc90056
made it possible for a single DML query plan to have multiple result
relations, when the query target relation has inheritance or partition
children. We replaced the output for the current result relation
successfully, but other result relations were still scanned normally;
thus, if any other result relation contained a tuple satisfying the
quals, we'd think the EPQ check passed, even if it did not pass for
the injected tuple itself. This would lead to update or delete
actions getting performed when they should have been skipped due to
a conflicting concurrent update in READ COMMITTED isolation mode.
Fix by blocking all sibling result relations from emitting tuples
during an EvalPlanQual recheck. In the back branches, the fix is
complicated a bit by the need to not change the size of struct
EPQState (else we'd have ABI-breaking changes in offsets in
struct ModifyTableState). Like the back-patches of 3f7836ff6
and 4b3e37993, add a separately palloc'd struct to avoid that.
The logic is the same as in HEAD otherwise.
This is only a live bug back to v14 where 86dc90056 came in.
However, I chose to back-patch the test cases further, on the
grounds that this whole area is none too well tested. I skipped
doing so in v11 though because none of the test applied cleanly,
and it didn't quite seem worth extra work for a branch with only
six months to live.
Per report from Ante Krešić (via Aleksander Alekseev)
Discussion: https://postgr.es/m/CAJ7c6TMBTN3rcz4=AjYhLPD_w3FFT0Wq_C15jxCDn8U4tZnH1g@mail.gmail.com
Should a hash join exceed memory limit, the hashtable is split up into
multiple batches. The number of batches is doubled each time a given
batch is determined not to fit in memory. Each batch file is allocated
with a block-sized buffer for buffering tuples and parallel hash join
has additional sharedtuplestore accessor buffers.
In some pathological cases requiring a lot of batches, often with skewed
data, bad stats, or very large datasets, users can run out-of-memory
solely from the memory overhead of all the batch files' buffers.
Batch files were allocated in the ExecutorState memory context, making
it very hard to identify when this batch explosion was the source of an
OOM. This commit allocates the batch files in a dedicated memory
context, making it easier to identify the cause of an OOM and work to
avoid it.
Based on initial draft by Tomas Vondra, with significant reworks and
improvements by Jehan-Guillaume de Rorthais.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Author: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/20190421114618.z3mpgmimc3rmubi4@development
Discussion: https://postgr.es/m/20230504193006.1b5b9622%40karst#273020ff4061fc7a2fbb1ba96b281f17
Add a high level description of our implementation of the hybrid hash
join algorithm to the block comment in nodeHashjoin.c.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20230516160051.4267a800%40karst
Most (older) comments in md.c and smgr.c are indented with a leading
tab on all lines, which isn't the current style and makes updating the
comments a bit annoying. This reindents all these lines with a single
space, as is the normal style. This issue exists in various shapes
throughout the code but it's pretty consistent here, and since there
is a patch pending to refresh some of the comments in these files, it
seems sensible to clean this up here separately.
Discussion: https://www.postgresql.org/message-id/flat/22fed8ba-01c3-2008-a256-4ea912d68fab%40enterprisedb.com
Non-leaf pages of GiST indexes contain key attributes, leaf pages
contain both key and non-key attributes, and gist_page_items() ignored
the handling of non-key attributes. This caused a few problems when
using gist_page_items() on a GiST index with INCLUDE:
- On a non-leaf page, the function would crash.
- On a leaf page, the function would work, but miss to display all the
values for included attributes.
This commit fixes gist_page_items() to handle such cases in a more
appropriate way, and now displays the values of key and non-key
attributes for each item separately in a style consistent with what
ruleutils.c would generate for the attribute list, depending on the page
type dealt with. In a way similar to how a record is displayed, values
would be double-quoted for key or non-key attributes if required.
ruleutils.c did not provide a routine able to control if non-key
attributes should be displayed, so an extended() routine for index
definitions is added to work around the leaf and non-leaf page
differences.
While on it, this commit fixes a third problem related to the amount of
data reported for key attributes. The code originally relied on
BuildIndexValueDescription() (used for error reports on constraints)
that would not print all the data stored in the index but the index
opclass's input type, so this limited the amount of information
available. This switch makes gist_page_items() much cheaper as there is
no need to run ACL checks for each item printed, which is not an issue
anyway as superuser rights are required to execute the functions of
pageinspect. Opclasses whose data cannot be displayed can rely on
gist_page_items_bytea().
The documentation of this function was slightly incorrect for the
output results generated on HEAD and v15, so adjust it on these
branches.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/17884-cb8c326522977acb@postgresql.org
Backpatch-through: 14
BRIN indexes did not properly distinguish between summaries for empty
(no rows) and all-NULL ranges, treating them as essentially the same
thing. Summaries were initialized with allnulls=true, and opclasses
simply reset allnulls to false when processing the first non-NULL value.
This however produces incorrect results if the range starts with a NULL
value (or a sequence of NULL values), in which case we forget the range
contains NULL values when adding the first non-NULL value.
This happens because the allnulls flag is used for two separate
purposes - to mark empty ranges (not representing any rows yet) and
ranges containing only NULL values.
Opclasses don't know which of these cases it is, and so don't know
whether to set hasnulls=true. Setting the flag in both cases would make
it correct, but it would also make BRIN indexes useless for queries with
IS NULL clauses. All ranges start empty (and thus allnulls=true), so all
ranges would end up with either allnulls=true or hasnulls=true.
The severity of the issue is somewhat reduced by the fact that it only
happens when adding values to an existing summary with allnulls=true.
This can happen e.g. for small tables (because a summary for the first
range exists for all BRIN indexes), or for tables with large fraction of
NULL values in the indexed columns.
Bulk summarization (e.g. during CREATE INDEX or automatic summarization)
that processes all values at once is not affected by this issue. In this
case the flags were updated in a slightly different way, not forgetting
the NULL values.
To identify empty ranges we use a new flag, stored in an unused bit in
the BRIN tuple header so the on-disk format remains the same. A matching
flag is added to BrinMemTuple, into a 3B gap after bt_placeholder.
That means there's no risk of ABI breakage, although we don't actually
pass the BrinMemTuple to any public API.
We could also skip storing index tuples for empty summaries, but then
we'd have to always process such ranges - even if there are no rows in
large parts of the table (e.g. after a bulk DELETE), it would still
require reading the pages etc. So we store them, but ignore them when
building the bitmap.
Backpatch to 11. The issue exists since BRIN indexes were introduced in
9.5, but older releases are already EOL.
Backpatch-through: 11
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
When merging BRIN summaries, union_tuples() did not correctly update the
target hasnulls/allnulls flags. When merging all-NULL summary into a
summary without any NULL values, the result had both flags set to false
(instead of having hasnulls=true).
This happened because the code only considered the hasnulls flags,
ignoring the possibility the source summary has allnulls=true.
Discovered while investigating issues with handling empty BRIN ranges
and handling of NULL values, but it's a separate problem (has nothing to
do with empty ranges).
Fixed by considering both flags on the source summary, and updating the
hasnulls flag on the target summary.
Backpatch to 11. The bug exists since 9.5 (where BRIN indexes were
introduced), but those releases are EOL already.
Discussion: https://postgr.es/m/9d993d0d-e431-2196-9ccc-0554d0e60154%40enterprisedb.com
Pass it the RestrictInfo under consideration, not just the
clause_relids. This should save some trivial amount of
code at the call sites, and it gives us more flexibility
about what clause_is_computable_at() does. There's no
actual functional change here, though.
Discussion: https://postgr.es/m/3564467.1684352557@sss.pgh.pa.us
Fixes memory error in cases where the length of the language name
returned by uloc_getLanguage() is exactly ULOC_LANG_CAPACITY, in which
case the status is set to U_STRING_NOT_TERMINATED_WARNING.
Also check in call sites for other ICU functions that are expected to
return a C string to be safe (no bug is known at these other call
sites).
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/2098874d-c111-41e4-9063-30bcf135226b@gmail.com
28e626bde0 added the concept of IOOps but neglected to include writeback
operations. ac8d53dae5 added time spent doing these I/O operations. Without
counting writeback, checkpointer write time in the log often differed
substantially from that in pg_stat_io. To fix this, add IOOp IOOP_WRITEBACK
and track writeback in pg_stat_io.
Bumps catversion.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230419172326.dhgyo4wrrhulovt6%40awork3.anarazel.de
For clarity of review, renaming the function parameter "context" in
ScheduleBufferTagForWriteback() and IssuePendingWritebacks() to
"wb_context" is a separate commit. The next commit adds an "io_context"
parameter and "wb_context" makes it more clear which is which.
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_acc6iL4M3hvOTeztf_ZPpsB3Pqio5aVHgZ5q=Pi3BZKg@mail.gmail.com
After applying outer-join identity 3 in the forward direction,
it was possible for the planner to mistakenly apply a qual clause
from above the two outer joins at the now-lower join level.
This can give the wrong answer, since a value that would get nulled
by the now-upper join might not yet be null.
To fix, when we perform such a transformation, consider that the
now-lower join hasn't really completed the outer join it's nominally
responsible for and thus its relid set should not include that OJ's
relid (nor should its output Vars have that nullingrel bit set).
Instead we add those bits when the now-upper join is performed.
The existing rules for qual placement then suffice to prevent
higher qual clauses from dropping below the now-upper join.
There are a few complications from needing to consider transitive
closures in case multiple pushdowns have happened, but all in all
it's not a very complex patch.
This is all new logic (from 2489d76c4) so no need to back-patch.
The added test cases all have the same results as in v15.
Tom Lane and Richard Guo
Discussion: https://postgr.es/m/0b819232-4b50-f245-1c7d-c8c61bf41827@postgrespro.ru
It seems like the code that these checks are backstopping may have
a few bugs left in it. Use a test-and-elog so that the tests are
performed even in non-assert builds, and so that we get something
more informative than "server closed the connection" on failure.
Committed separately with the idea that eventually we'll revert
this. It might be awhile though.
Discussion: https://postgr.es/m/3014965.1684293045@sss.pgh.pa.us
This is equivalent to a revert of f193883 and fb32748, with the addition
that the declaration of the SQLValueFunction node needs to gain a couple
of node_attr for query jumbling. The performance impact of removing the
function call inlining is proving to be too huge for some workloads
where these are used. A worst-case test case of involving only simple
SELECT queries with a SQL keyword is proving to lead to a reduction of
10% in TPS via pgbench and prepared queries on a high-end machine.
None of the tests I ran back for this set of changes saw such a huge
gap, but Alexander Lakhin and Andres Freund have found that this can be
noticeable. Keeping the older performance would mean to do more
inlining in the executor when using COERCE_SQL_SYNTAX for a function
expression, similarly to what SQLValueFunction does. This requires more
redesign work and there is little time until 16beta1 is released, so for
now reverting the change is the best way forward, bringing back the
previous performance.
Bump catalog version.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b32bed1b-0746-9b20-1472-4bdc9ca66d52@gmail.com
The problem that these messages protect against can only occur because
a corrupted hash spill file was written, i.e., a Postgres bug. There's
no reason to have them as translatable.
Backpatch to 15, where these messages were changed by commit c4649cce39.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20230510175407.dwa5v477pw62ikyx@alvherre.pgsql
Commit a73952b795 (new in 16) required default values in guc_table.c
and C variable initializers to match. This one only matched when
XLOG_BLCKSZ == 8kB. Fix by using the same expression in both places
with a new DEFAULT_XXX macro, as done for other GUCs.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGLNmLV=VrT==5MqnbARgx2ifRSFtdd8ofdfrdSLL3yv5A@mail.gmail.com
Give the new GUC introduced by d4e71df6 a name that is clearly not
intended for mainstream use quite yet.
Future proposals would drop the prefix only after adding infrastructure
to make it efficient. Having the switch in the tree sooner is good
because it might lead to new discoveries about the hazards awaiting us
on a wide range of systems, but that name was too enticing and could
lead to cross-version confusion in future, per complaints from Noah and
Justin.
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (the idea, not the patch)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (ditto)
Discussion: https://postgr.es/m/20230430041106.GA2268796%40rfd.leadboat.com
Jeff Davis
Nathan Bossart
Masahiko Sawada
Tom Lane
Tomas Vondra
Peter Eisentraut
Amit Kapila
Heikki Linnakangas
Peter Geoghegan
Andres Freund
Bruce Momjian
Michael Paquier
Alexander Korotkov
Alvaro Herrera
Thomas Munro