This commit addresses the following issues in the TAP tests of
pg_upgrade, introduced in 322becb:
- Remove --port and --host for commands that already rely on a node's
environment PGHOST and PGPORT.
- Switch from run_log() to command_ok(), as all the commands executed in
the tests should succeed.
- Change EXTRA_REGRESS_OPTS to make it count as a shell fragment (fixing
s/OPT/OPTS on a way), to be compatible with the various Makefiles using
it as well as 027_stream_regress.pl in the recovery tests. The command
built for the execution the pg_regress command is reformatted, while on
it, to map with the recovery test doing the same thing (we should
refactor and consolidate that in the future, perhaps).
- Re-add the test for database names stressing the behavior of
backslashes with double quotes, mostly here for Windows.
Tests doable with the upgrade across different major versions still work
the same way.
Reported-by: Noah Misch
Discussion: https://postgr.es/m/20220502042718.GB1565149@rfd.leadboat.com
Commit aa0105141 assigned fixed OIDs to template0 and postgres
in a very ad-hoc way. Notably, instead of teaching Catalog.pm
about these OIDs, the unused_oids script was just hacked to
not show them as unused. That's problematic since, for example,
duplicate_oids wouldn't report any future conflict. Hence,
invent a macro DECLARE_OID_DEFINING_MACRO() that can be used to
define an OID that is known to Catalog.pm and will participate
in duplicate-detection as well as renumbering by renumber_oids.pl.
(We don't anticipate renumbering these particular OIDs, but we
might as well build out all the Catalog.pm infrastructure while
we're here.)
Another issue is that aa0105141 neglected to touch IsPinnedObject,
with the result that it now claimed template0 and postgres are
pinned. The right thing to do there seems to be to teach it that
no database is pinned, since in fact DROP DATABASE doesn't check
for pinned-ness (and at least for these cases, that is an
intentional choice). It's not clear whether this wrong answer
had any visible effect, but perhaps it could have resulted in
erroneous management of dependency entries.
In passing, rename the TemplateDbOid macro to Template1DbOid
to reduce confusion (likely we should have done that way back
when we invented template0, but we didn't), and rename the
OID macros for template0 and postgres to have a similar style.
There are no changes to postgres.bki here, so no need for a
catversion bump.
Discussion: https://postgr.es/m/2935358.1650479692@sss.pgh.pa.us
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
Remove meaningless "failures" column from the aggregate logging. It
was just a sum of "serialization failures" and "deadlock failures".
Pointed out by Tom Lane. Patch reviewed by Fabien COELHO.
Discussion: https://postgr.es/m/4183048.1649536705%40sss.pgh.pa.us
The new option set of pg_receivewal introduced in 042a923 to control the
compression method makes it now easy to pass down various options,
including the compression level. The change to be able to do is simple,
and requires one LZ4F_preferences_t fed to LZ4F_compressBegin().
Note that LZ4F_INIT_PREFERENCES could be used to initialize the contents
of LZ4F_preferences_t as required by LZ4, but this is only available
since v1.8.3. memset()'ing its structure to 0 is enough.
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
With a pre-v15 server, show NULL for the "ICU Locale" column,
matching what you see in v15 when the database locale isn't ICU.
The previous coding incorrectly repeated datcollate here.
(There's an unfinished discussion about whether to consolidate
these columns in \l output, but in any case we'd want this fix
for \l+ output.)
Euler Taveira, per report from Christoph Berg
Discussion: https://postgr.es/m/YlmIFCqu+TZSW4rB@msg.df7cb.de
Input for these should be case-insensitive, but was not completely
so. Comparing to the similar queries for timezone names, I realized
that we'd missed forcing the comparison pattern to lower-case.
With that, it behaves as I expect.
While here, flatten the sub-selects in these queries; I don't
find that those add any readability.
Discussion: https://postgr.es/m/3369130.1649348542@sss.pgh.pa.us
Define "parameters with non-default settings" as being those that
not only have pg_settings.source different from 'default', but
also have a current value different from the hard-wired boot_val.
Adding the latter restriction removes a number of not-very-interesting
cases where the active setting is chosen by initdb but in practice
tends to be the same all the time.
Per discussion with Jonathan Katz.
Discussion: https://postgr.es/m/YlFQLzlPi4QD0wSi@msg.df7cb.de
Since babbbb5 and the introduction of LZ4 in pg_receivewal, the
compression of the WAL archived is controlled by two options:
- --compression-method with "gzip", "none" or "lz4" as possible value.
- --compress=N to specify a compression level. This includes a
backward-incompatible change where a value of 0 leads to a failure
instead of no compression enforced.
This commit takes advantage of a4b5754 and 3603f7c to rework the
compression options of pg_receivewal, as of:
- The removal of --compression-method.
- The extenction of --compress to use the same grammar as pg_basebackup,
with a METHOD:DETAIL format, where a METHOD is "gzip", "none" or "lz4"
and a DETAIL is a comma-separated list of options, the only keyword
supported is now "level" to control the compression level. If only an
integer is specified as value of this option, "none" is implied on 0
and "gzip" is implied otherwise. This brings back --compress to be
backward-compatible with ~14, while still supporting LZ4.
This has also the advantage of centralizing the set of checks used by
pg_receivewal to validate its compression options.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
Enforce __pg_log_level message filtering centrally in logging.c,
instead of relying on the calling macros to do it. This is more
reliable (e.g. it works correctly for direct calls to pg_log_generic)
and it saves a percent or so of total code size because we get rid of
so many duplicate checks of __pg_log_level.
This does mean that argument expressions in a logging macro will be
evaluated even if we end up not printing anything. That seems of
little concern for INFO and higher levels as those messages are printed
by default, and most of our frontend programs don't even offer a way to
turn them off. I left the unlikely() checks in place for DEBUG
messages, though.
Discussion: https://postgr.es/m/3993549.1649449609@sss.pgh.pa.us
The same structure, with the same set of elements (for none, lz4, gzip
and zstd), exists in compression.h, so let's make use of the centralized
version instead of duplicating things. Some of the variables used
previously for WalCompressionMethod are renamed to stick better with the
new structure and routine names.
WalCompressionMethod was leading to some confusion in walmethods.c, as
it was sometimes used to refer to some data unrelated to WAL.
Reported-by: Robert Haas
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
Compression option handling (level, algorithm or even workers) can be
used across several parts of the system and not only base backups.
Structures, objects and routines are renamed in consequence, to remove
the concept of base backups from this part of the code making this
change straight-forward.
pg_receivewal, that has gained support for LZ4 since babbbb5, will make
use of this infrastructure for its set of compression options, bringing
more consistency with pg_basebackup. This cleanup needs to be done
before releasing a beta of 15. pg_dump is a potential future target, as
well, and adding more compression options to it may happen in 16~.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
All but a few existing callers assume without checking that this
function succeeds. While it probably will, that's a poor excuse for
not checking. Let's make it return void and instead throw an error
if it doesn't find the block reference. Callers that actually need
to handle the no-such-block case must now use the underlying function
XLogRecGetBlockTagExtended.
In addition to being a bit less error-prone, this should also serve
to suppress some Coverity complaints about XLogRecGetBlockRefInfo.
While at it, clean up some inconsistency about use of the
XLogRecHasBlockRef macro: make XLogRecGetBlockTagExtended use
that instead of open-coding the same condition, and avoid calling
XLogRecHasBlockRef twice in relevant code paths. (That is,
calling XLogRecHasBlockRef followed by XLogRecGetBlockTag is now
deprecated: use XLogRecGetBlockTagExtended instead.)
Patch HEAD only; this doesn't seem to have enough value to consider
a back-branch API break.
Discussion: https://postgr.es/m/425039.1649701221@sss.pgh.pa.us
\dconfig without an argument originally printed all parameters,
but it seems more useful to print only those parameters with
non-default settings. You can easily get the show-everything
behavior with "\dconfig *", but that output is unwieldy and
seems unlikely to be wanted very often.
Per suggestion from Christoph Berg.
Discussion: https://postgr.es/m/YlFQLzlPi4QD0wSi@msg.df7cb.de
wrasse, at least, moans about the lack of any "return" statement
in these functions. You'd think pretty much everything would
know that exit(1) doesn't return, but evidently not.
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
Commit 5a2832465f added
addFooterToPublicationDesc() as a wrapper around
printTableAddFooter(). The translation marker _() was moved to the
body of addFooterToPublicationDesc(), but addFooterToPublicationDesc()
was not added to GETTEXT_TRIGGERS, so those strings were lost for
translation. To fix, add the translation markers to the call sites of
addFooterToPublicationDesc() and remove the translation marker from
the body of the function. This seems easiest since there were only
two callers and it keeps the API consistent with
printTableAddFooter(). While we're here, add some const decorations
to the prototype of addFooterToPublicationDesc() for consistency with
printTableAddFooter().
These are usually not useful since users will use packaged
distributions and won't be interested in rebuilding their installation
from source. Also, we have only used these kinds of hints for some
features and in some places, not consistently throughout.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2552aed7-d0e9-280a-54aa-2dc7073f371d%40enterprisedb.com
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
Change two macros to be static inline functions instead to keep the
data type consistent. This avoids a "comparison is always true"
warning that was occurring with -Wtype-limits. In the process, change
the names to look less like macros.
Discussion: https://postgr.es/m/20220407063505.njnnrmbn4sxqfsts@alap3.anarazel.de
Allow extensions to specify a new custom resource manager (rmgr),
which allows specialized WAL. This is meant to be used by a Table
Access Method or Index Access Method.
Prior to this commit, only Generic WAL was available, which offers
support for recovery and physical replication but not logical
replication.
Reviewed-by: Julien Rouhaud, Bharath Rupireddy, Andres Freund
Discussion: https://postgr.es/m/ed1fb2e22d15d3563ae0eb610f7b61bb15999c0a.camel%40j-davis.com
With stats now being stored in shared memory, the GUC isn't needed
anymore. However, the pg_stat_tmp directory and PG_STAT_TMP_DIR define are
kept, as pg_stat_statements (and some out-of-core extensions) store data in
it.
Docs will be updated in a subsequent commit, together with the other pending
docs updates due to shared memory stats.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220330233550.eiwsbearu6xhuqwe@alap3.anarazel.de
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
This option is useful to do a rewind with the server configuration file
(aka postgresql.conf) located outside the data directory, which is
something that some Linux distributions and some HA tools like to rely
on. As a result, this can simplify the logic around a rewind by
avoiding the copy of such files before running pg_rewind.
This option affects pg_rewind when it internally starts the target
cluster with some "postgres" commands, adding -c config_file=FILE to the
command strings generated, when:
- retrieving a restore_command using a "postgres -C" command for
-c/--restore-target-wal.
- forcing crash recovery once to get the cluster into a clean shutdown
state.
Author: Gunnar "Nick" Bluth
Reviewed-by: Michael Banck, Alexander Kukushkin, Michael Paquier,
Alexander Alekseev
Discussion: https://postgr.es/m/7c59265d-ac50-b0aa-ca1e-65e8bd27642a@pro-open.de
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
Commit 4a39f87acd changed the aggregated log format. Problem is, now
the explanatory paragraph for the log line in the document is too
long. Also the log format included more optional columns, and it's
harder to parse the log lines. This commit tries to solve the
problems.
- There's no optional log columns anymore. If a column is not
meaningful with provided pgbench option, it will be presented as 0.
- Reorder the log columns so that it's easier to parse them.
- Adjust explanatory paragraph for the log line in the doc.
Discussion: https://postgr.es/m/flat/202203280757.3tu4ovs3petm%40alvherre.pgsql
The pg_fatal log which included filesizes were using UINT64_FORMAT for
the size_t variables, which failed on 32 bit buildfarm animals. Change
to using plain int instead, which is in line with how digestControlFile
is doing it already.
Per buildfarm animals florican and lapwing.
Discussion: https://postgr.es/m/13C2BF64-4A6D-47E4-9181-3A658F00C9B7@yesql.se
There's a race condition if a file changes in the source system
after we have collected the file list. If the file becomes larger,
we only fetched up to its original size. That can easily result in
a truncated file. That's not a problem for relation files, files
in pg_xact, etc. because any actions on them will be replayed from
the WAL. However, configuration files are affected.
This commit mitigates the race condition by fetching small files in
whole, even if they have grown. A test is added in which an extra
file copied is concurrently grown with the output of pg_rewind thus
guaranteeing it to have changed in size during the operation. This
is not a full fix: we still believe the original file size for files
larger than 1 MB. That should be enough for configuration files,
and doing more than that would require big changes to the chunking
logic in libpq_source.c.
This mitigates the race condition if the file is modified between
the original scan of files and copying the file, but there's still
a race condition if a file is changed while it's being copied.
That's a much smaller window, though, and pg_basebackup has the
same issue.
This race can be seen with pg_auto_failover, which frequently uses
ALTER SYSTEM, which updates postgresql.auto.conf. Often, pg_rewind
will fail, because the postgresql.auto.conf file changed concurrently
and a partial version of it was copied to the target. The partial
file would fail to parse, preventing the server from starting up.
Author: Heikki Linnakangas
Reviewed-by: Cary Huang
Discussion: https://postgr.es/m/f67feb24-5833-88cb-1020-19a4a2b83ac7%40iki.fi
The test logic is extended with two new concepts:
- Addition of a compression command called compress_cmd, executed
between restore_cmd and dump_cmd to control the contents of the dumps.
In the case of this commit, this is used to compress or decompress
elements of a dump to test new code paths.
- Addition of a new flag called compile_option, to check if a set of
tests can be executed depending on the ./configure options used in a
given build.
The tests introduced here are for gzip, but they are designed so as they
can easily be extended for new compression methods.
Author: Georgios Kokolatos, Rachel Heaton
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss=@protonmail.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a51306722 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
Before this patch, there was some code that tried to make sure that the
buffer was always big enough at the start, and then asserted that it
didn't need to be enlarged later. However, the code to make sure it was
big enough at the start doesn't actually work, and therefore it was
possible to fail an assertion and crash later.
Remove the code that tries to make sure the buffer is always big enough
at the start in favor of enlarging the buffer as we go along whenever
that is necessary.
The mistake probably happened because, on the server side, we do
actually need to guarantee that the buffer is big enough at the start
to avoid subsequent resizings. However, in that case, the calling
code makes promises about how much data it will provide at once, but
here, that's not the case.
Report by Justin Pryzby. Analysis by me. Patch by Dipesh Pandit.
Discussion: http://postgr.es/m/20220330143536.GG28503@telsasoft.com
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
This commit includes a set of improvements to help with the debugging of
failures in these new TAP tests:
- Instead of a plain diff command to compare the dumps generated, use
File::Compare::compare for the same effect. diff is still used to
provide more context in the event of an error.
- Log the contents of regression.diffs if the pg_regress command fails.
- Unify the format of the logs generated, getting inspiration from the
style used in 027_stream_regress.pl.
wrasse is the only buildfarm member that has reported a failure until
now after the introduction of 322becb, complaining that the dumps
generated do not match, and I am lacking information to understand what
is going in this environment.
This simplifies a lot of code in the tests of pg_upgrade without
sacrificing its coverage:
- Removal of test.sh used for builds with make, that has accumulated
over the years tweaks for problems that are solved in a duplicated way
by the centralized TAP framework (initialization of the various
environment variables PG*, port selection).
- Removal of the code in MSVC to test pg_upgrade. This was roughly a
duplicate of test.sh adapted for Windows, with an extra footprint of
a pg_regress command and all the assumptions behind it.
Support for upgrades with older versions is changed, not removed.
test.sh was able to set up the regression database on the old instance
by launching itself the pg_regress command and a dependency to the
source tree of thd old cluster, with tweaks on the command arguments to
adapt across the versions used. This created a backward-compatibility
dependency with older pg_regress commands, and recent changes like
d1029bb have made that much more complicated.
Instead, this commit allows tests with older major versions by
specifying a path to a SQL dump (taken with pg_dumpall from the old
cluster's installation) that will be loaded into the old instance to
upgrade instead of running pg_regress, through an optional environment
variable called $olddump. This requires a second variable called
$oldinstall to point to the base path of the installation of the old
cluster. This method is more in line with the buildfarm client that
uses a set of static dumps to set up an old instance, so hopefully we
will be able to reuse what is introduced in this commit there. The last
step of the tests that checks for differences between the two dumps
taken still needs to be improved as it can fail, requiring a manual
lookup at the dumps. This is not different from the old way of testing
where things could fail at the last step.
Support for EXTRA_REGRESS_OPTS is kept. vcregress.pl in the MSVC
scripts still handles the test of pg_upgrade with its upgradecheck, and
bincheck is changed to skip pg_upgrade.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan, Andres Freund, Rachel Heaton, Tom Lane,
Discussion: https://postgr.es/m/YJ8xTmLQkotVLpN5@paquier.xyz
This breaks out the fetch-it-all-and-print case in SendQuery() into a
separate function. This makes the code more similar to the other
cases \gdesc and run query with FETCH_COUNT, and makes SendQuery()
itself a bit smaller.
Extracted from a larger patch with more changes in this area to
follow.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
Compression with gzip has never been supported in the tar format of
pg_dump since this code has been introduced in c3e18804, as the use of
buffered I/O in gzdopen() changes the file positioning that tar
requires. The original idea behind the use of compression with the tar
mode is to be able to include compressed data files (named %u.dat.gz)
and blob files (blob_%u.dat.gz) in the tarball generated by the dump,
with toc.dat, that tracks down if compression is used in the dump,
always uncompressed.
Note that this commit removes the dump part of the code as well as the
restore part, removing any dependency to zlib in pg_backup_tar.c. There
could be an argument behind keeping around the restore part, but this
would require one to change the internals of a tarball previously dumped
so as data and blob files are compressed with toc.dat itself changed to
track down if compression is enabled. However, the argument about
gzdopen() still holds in the read case with pg_restore.
Removing this code simplifies future additions related to compression in
pg_dump.
Author: Georgios Kokolatos, Rachel Heaton
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss=@protonmail.com
libzstd allows transparent parallel compression just by setting
an option when creating the compression context, so permit that
for both client and server-side backup compression. To use this,
use something like pg_basebackup --compress WHERE-zstd:workers=N
where WHERE is "client" or "server" and N is an integer.
When compression is performed on the server side, this will spawn
threads inside the PostgreSQL backend. While there is almost no
PostgreSQL server code which is thread-safe, the threads here are used
internally by libzstd and touch only data structures controlled by
libzstd.
Patch by me, based in part on earlier work by Dipesh Pandit
and Jeevan Ladhe. Reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
Linux thinks that something like "createdb foo -S bar" is perfectly
fine, but Windows wants the options to precede any bare arguments, so
we must write "createdb -S bar foo" for portability.
Per reports from CI, the buildfarm, and Andres.
Discussion: http://postgr.es/m/20220329173536.7d2ywdatsprxl4x6@alap3.anarazel.de
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
When we try to set the zstd compression level either on the client
or on the server, check for errors.
For any algorithm, on the client side, don't try to set the compression
level unless the user specified one. This was visibly broken for
zstd, which managed to set -1 rather than 0 in this case, but tidy
up the code for the other methods, too.
On the client side, if we fail to create a ZSTD_CCtx, exit after
reporting the error. Otherwise we'll dereference a null pointer.
Patch by me, reviewed by Dipesh Pandit.
Discussion: http://postgr.es/m/CA+TgmoZK3zLQUCGi1h4XZw4jHiAWtcACc+GsdJR1_Mc19jUjXA@mail.gmail.com
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
After closedir() dirent->d_name is not valid anymore. As there alerady are a
few places relying on the limited lifetime of pg_waldump, do so here as well,
and just pg_strdup() the string.
The bug was introduced in fc49e24fa6.
Found by UBSan, run locally.
Backpatch: 11-, like fc49e24fa6 itself.
This is a follow-up to commit 7dac61402 which removed a set of unused
modules from the TAP test.
The Config references in the pg_ctl and pg_rewind tests were removed
in commit 1c6d46293. Fcntl ':mode' and File::stat in the pg_ctl test
were added in c37b3d08c which was probably a leftover from an earlier
version of the patch, as the function using these was added to another
module in that commit.
The Config reference in the ldap test was added in ee56c3b21 which in
turn use $^O instead of interrogating Config.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/87lewyqk45.fsf@wibble.ilmari.org
In the wake of commit 4a39f87ac, which noticeably increased the
size of struct StatsData and thereby ParsedScript, Coverity started
to complain that ParsedScript was unreasonably large to be passing
by value. The two places that do this are only used during setup,
so they're not really dragging down benchmark measurements --- but
gratuitous inefficiency is not a good look in a benchmarking program.
Convert to use pointers instead.
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
The previous method for doing that was to write zeroes into a
predetermined set of page locations. However, there's a roughly
1-in-64K chance that the existing checksum will match by chance,
and yesterday several buildfarm animals started to reproducibly
see that, resulting in test failures because no checksum mismatch
was reported.
Since the checksum includes the page LSN, test success depends on
the length of the installation's WAL history, which is affected by
(at least) the initial catalog contents, the set of locales installed
on the system, and the length of the pathname of the test directory.
Sooner or later we were going to hit a chance match, and today is
that day.
Harden these tests by specifically inverting the checksum field and
leaving all else alone, thereby guaranteeing that the checksum is
incorrect.
In passing, fix places that were using seek() to set up for syswrite(),
a combination that the Perl docs very explicitly warn against. We've
probably escaped problems because no regular buffered I/O is done on
these filehandles; but if it ever breaks, we wouldn't deserve or get
much sympathy.
Although we've only seen problems in HEAD, now that we recognize the
environmental dependencies it seems like it might be just a matter
of time until someone manages to hit this in back-branch testing.
Hence, back-patch to v11 where we started doing this kind of test.
Discussion: https://postgr.es/m/3192026.1648185780@sss.pgh.pa.us
Move DLSUFFIX from makefiles into header files for all platforms.
Move the DLSUFFIX assignment from src/makefiles/ to src/templates/,
have configure read it, and then substitute it into Makefile.global
and pg_config.h. This avoids the need for all makefile rules that
need it to locally set CPPFLAGS. It also resolves an inconsistent
setup between the two Windows build systems.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/2f9861fb-8969-9005-7518-b8e60f2bead9@enterprisedb.com
Bildfarm member prairiedog reported a pgbench TAP test failure after
commit: 4a39f87acd. This is the second
attempt to fix it. It seems older version of Perl does not accept
"\gN". Replace it with plain old "\N" because actually "\gN" is not
necessary here.
Author: Tatsuo Ishii
Reported-by: Tom Lane
Reviewed-by: Tom Lane, Yugo Nagata
Discussion: https://postgr.es/m/2775989.1648060014%40sss.pgh.pa.us
Follow-up improvements for commit 127aea2a based on discussion:
* use fork name for --fork, not number
* use -R, -B as short switches for --relation, --block
* re-alphabetize the list of switches (code, --help and docs)
Suggested-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com> (fork name part)
Reviewed-by: David Christensen <david.christensen@crunchydata.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/3a4c2e93-7976-2320-fc0a-32097fe148a7%40enterprisedb.com
The check for datallowconn being properly set on all databases in the
old cluster errored out on the first instance, rather than report the
set of problematic databases. This adds reporting to a textfile like
how many other checks are performed. While there, also add a comment
to the function as per how other checks are commented.
This check won't catch if template1 isn't allowing connections, since
that's used for connecting in the first place. That error remains as
it is today:
connection to server on socket ".." failed: FATAL: database "template1" is not currently accepting connections
Author: Jeevan Ladhe <jeevan.ladhe@enterprisedb.com>
Reviewed-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAOgcT0McABqF_iFFQuuRf9is+gmYMsmUu_SWNikyr=2VGyP9Jw@mail.gmail.com
The Config and Cwd modules were no longer used, but remained imported,
in a number of tests. Remove to keep the imports to the actually used
modules.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/A5A074CD-3198-492B-BE5E-7961EFC3733F@yesql.se
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Bildfarm member prairiedog reported a pgbench TAP test failure after
commit: 4a39f87acd. This commit attempts
to fix some copy&paste errors introduced in the previous commit.
Author: Yugo Nagata
Reported-by: Tom Lane
Discussion: https://postgr.es/m/2775989.1648060014%40sss.pgh.pa.us
It seems possible for the condition being tested to be true in
production, and nobody would never know (except when some data
eventually becomes corrupt?).
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m//202109040001.zky3wgv2qeqg@alvherre.pgsql
Commit ffd53659c4 messed up the
mechanism that was being used to pass parameters to LogStreamerMain()
on Windows. It worked on Linux because only Windows was using threads.
Repair by moving the additional parameters added by that commit into
the 'logstreamer_param' struct.
Along the way, fix a compiler warning on builds without HAVE_LIBZ.
Discussion: http://postgr.es/m/CA+TgmoY5=AmWOtMj3v+cySP2rR=Bt6EGyF_joAq4CfczMddKtw@mail.gmail.com
There are more compression parameters that can be specified than just
an integer compression level, so rename the new COMPRESSION_LEVEL
option to COMPRESSION_DETAIL before it gets released. Introduce a
flexible syntax for that option to allow arbitrary options to be
specified without needing to adjust the main replication grammar,
and common code to parse it that is shared between the client and
the server.
This commit doesn't actually add any new compression parameters,
so the only user-visible change is that you can now type something
like pg_basebackup --compress gzip:level=5 instead of writing just
pg_basebackup --compress gzip:5. However, it should make it easy to
add new options. If for example gzip starts offering fries, we can
support pg_basebackup --compress gzip:level=5,fries=true for the
benefit of users who want fries with that.
Along the way, this fixes a few things in pg_basebackup so that the
pg_basebackup can be used with a server-side compression algorithm
that pg_basebackup itself does not understand. For example,
pg_basebackup --compress server-lz4 could still succeed even if
only the server and not the client has LZ4 support, provided that
the other options to pg_basebackup don't require the client to
decompress the archive.
Patch by me. Reviewed by Justin Pryzby and Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/CA+TgmoYvpetyRAbbg1M8b3-iHsaN4nsgmWPjOENu5-doHuJ7fA@mail.gmail.com
When serialization or deadlock errors are reported by backend, allow
to retry and continue the benchmarking. For this purpose new options
"--max-tries", "--failures-detailed" and "--verbose-errors" are added.
Transactions with serialization errors or deadlock errors will be
repeated after rollbacks until they complete successfully or reach the
maximum number of tries (specified by the --max-tries option), or the
maximum time of tries (specified by the --latency-limit option).
These options can be specified at the same time. It is not possible to
use an unlimited number of tries (--max-tries=0) without the
--latency-limit option or the --time option. By default the option
--max-tries is set to 1, which means transactions with
serialization/deadlock errors are not retried. If the last try fails,
this transaction will be reported as failed, and the client variables
will be set as they were before the first run of this transaction.
Statistics on retries and failures are printed in the progress,
transaction / aggregation logs and in the end with other results (all
and for each script). Also retries and failures are printed
per-command with average latency by using option
(--report-per-command, -r).
Option --failures-detailed prints group failures by basic types
(serialization failures / deadlock failures).
Option --verbose-errors prints distinct reports on errors and failures
(errors without retrying) by type with detailed information like which
limit for retries was violated and how far it was exceeded for the
serialization/deadlock failures.
Patch originally written by Marina Polyakova then Yugo Nagata
inherited the discussion and heavily modified the patch to make it
commitable.
Authors: Yugo Nagata, Marina Polyakova
Reviewed-by: Fabien Coelho, Tatsuo Ishii, Alvaro Herrera, Kevin Grittner, Andres Freund, Arthur Zakirov, Alexander Korotkov, Teodor Sigaev, Ildus Kurbangaliev
Discussion: https://postgr.es/m/flat/72a0d590d6ba06f242d75c2e641820ec%40postgrespro.ru
When cross-building to windows, or building with mingw on windows, the build
could fail with
x86_64-w64-mingw32-gcc: error: win32ver.o: No such file or director
because pg_dumpall didn't depend on WIN32RES, but it's recipe references
it. The build nevertheless succeeded most of the time, due to
pg_dump/pg_restore having the required dependency, causing win32ver.o to be
built.
Reported-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGJeekpUPWW6yCVdf9=oBAcCp86RrBivo4Y4cwazAzGPng@mail.gmail.com
Backpatch: 10-, omission present on all live branches
This feature allows skipping the transaction on subscriber nodes.
If incoming change violates any constraint, logical replication stops
until it's resolved. Currently, users need to either manually resolve the
conflict by updating a subscriber-side database or by using function
pg_replication_origin_advance() to skip the conflicting transaction. This
commit introduces a simpler way to skip the conflicting transactions.
The user can specify LSN by ALTER SUBSCRIPTION ... SKIP (lsn = XXX),
which allows the apply worker to skip the transaction finished at
specified LSN. The apply worker skips all data modification changes within
the transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Hou Zhijie, Peter Eisentraut, Amit Kapila, Shi Yu, Vignesh C, Greg Nancarrow, Haiying Tang, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
For GENERATED columns, we record all dependencies of the generation
expression as AUTO dependencies of the column itself. This means
that the generated column is silently dropped if any dependency
is removed, even if CASCADE wasn't specified. This is at least
a POLA violation, but I think it's actually based on a misreading
of the standard. The standard does say that you can't drop a
dependent GENERATED column in RESTRICT mode; but that's buried down
in a subparagraph, on a different page from some pseudocode that
makes it look like an AUTO drop is being suggested.
Change this to be more like the way that we handle regular default
expressions, ie record the dependencies as NORMAL dependencies of
the pg_attrdef entry. Also, make the pg_attrdef entry's dependency
on the column itself be INTERNAL not AUTO. That has two effects:
* the column will go away, not just lose its default, if any
dependency of the expression is dropped with CASCADE. So we
don't need any special mechanism to make that happen.
* it provides an additional cross-check preventing someone from
dropping the default expression without dropping the column.
catversion bump because of change in the contents of pg_depend
(which also requires a change in one information_schema view).
Per bug #17439 from Kevin Humphreys. Although this is a longstanding
bug, it seems impractical to back-patch because of the need for
catalog contents changes.
Discussion: https://postgr.es/m/17439-7df4421197e928f0@postgresql.org
createdb() didn't check for collation attributes validity, which has
to be done explicitly on ICU < 54. It also forgot to close the ICU collator
opened during the check which leaks some memory.
To fix both, add a new check_icu_locale() that does all the appropriate
verification and close the ICU collator.
initdb also had some partial check for ICU < 54. To have consistent error
reporting across major ICU versions, and get rid of the need to include ucol.h,
remove the partial check there. The backend will report an error if needed
during the post-boostrap iniitialization phase.
Author: Julien Rouhaud <julien.rouhaud@free.fr>
Discussion: https://www.postgresql.org/message-id/20220319041459.qqqiqh335sga5ezj@jrouhaud
b048326 has added support for SET ACCESS METHOD in ALTER TABLE, but it
has missed a few things for materialized views:
- No documentation for this clause on the ALTER MATERIALIZED VIEW page.
- psql tab completion missing.
- No regression tests.
This commit closes the gap on all the points listed above.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220316133337.5dc9740abfa24c25ec9f67f5@sraoss.co.jp
Teach xlogreader.c to decode the WAL into a circular buffer. This will
support optimizations based on looking ahead, to follow in a later
commit.
* XLogReadRecord() works as before, decoding records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros and certain traditional members like xlogreader->ReadRecPtr.
* An alternative new interface XLogReadAhead()/XLogNextRecord() is
added that returns pointers to DecodedXLogRecord objects so that it's
now possible to look ahead in the WAL stream while replaying.
* In order to be able to use the new interface effectively while
streaming data, support is added for the page_read() callback to
respond to a new nonblocking mode with XLREAD_WOULDBLOCK instead of
waiting for more data to arrive.
No direct user of the new interface is included in this commit, though
XLogReadRecord() uses it internally. Existing code doesn't need to
change, except in a few places where it was accessing reader internals
directly and now needs to go through accessor macros.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
lz4frame.h was getting declared after the headers specific to Postgres,
but it needs to be included between postgres_fe.h and the internal
headers.
Issue introduced by babbbb5.
Reported-by: Justin Prysby
Discussion: https://postgr.es/m/20220317111220.GI28503@telsasoft.com
This adds the option to use ICU as the default locale provider for
either the whole cluster or a database. New options for initdb,
createdb, and CREATE DATABASE are used to select this.
Since some (legacy) code still uses the libc locale facilities
directly, we still need to set the libc global locale settings even if
ICU is otherwise selected. So pg_database now has three
locale-related fields: the existing datcollate and datctype, which are
always set, and a new daticulocale, which is only set if ICU is
selected. A similar change is made in pg_collation for consistency,
but in that case, only the libc-related fields or the ICU-related
field is set, never both.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a%402ndquadrant.com
These tests were added recently, but older code tests USE_LZ4 rathr
than HAVE_LIBLZ4, so let's follow the established precedent. It
also seems more consistent with the intent of the configure tests,
since I think that the USE_* symbols are intended to correspond to
what the user requested, and the HAVE_* symbols to what configure
found while probing.
Discussion: http://postgr.es/m/CA+Tgmoap+hTD2-QNPJLH4tffeFE8MX5+xkbFKMU3FKBy=ZSNKA@mail.gmail.com
Logical replication apply workers for a subscription can easily get stuck
in an infinite loop of attempting to apply a change, triggering an error
(such as a constraint violation), exiting with the error written to the
subscription server log, and restarting.
To partially remedy the situation, this patch adds a new subscription
option named 'disable_on_error'. To be consistent with old behavior, this
option defaults to false. When true, both the tablesync worker and apply
worker catch any errors thrown and disable the subscription in order to
break the loop. The error is still also written in the logs.
Once the subscription is disabled, users can either manually resolve the
conflict/error or skip the conflicting transaction by using
pg_replication_origin_advance() function. After resolving the conflict,
users need to enable the subscription to allow apply process to proceed.
Author: Osumi Takamichi and Mark Dilger
Reviewed-by: Greg Nancarrow, Vignesh C, Amit Kapila, Wang wei, Tang Haiying, Peter Smith, Masahiko Sawada, Shi Yu
Discussion : https://postgr.es/m/DB35438F-9356-4841-89A0-412709EBD3AB%40enterprisedb.com
