Fail with a suitable error message instead. We can't inject the backup
manifest into the output tarfile without decompressing it, and if
we did that, we'd have to recompress the tarfile afterwards to produce
the result the user is expecting. While we have enough infrastructure
in pg_basebackup now to accomplish that whole series of steps without
much additional code, it seems like excessively surprising behavior.
The user probably did not select server-side compression with the idea
that the client was going to end up decompressing it and then
recompressing.
Report from Justin Pryzby. Fix by me.
Discussion: http://postgr.es/m/CA+Tgmob6Rnjz-Qv32h3yJn8nnUkLhrtQDAS4y5AtsgtorAFHRA@mail.gmail.com
wal_compression gains a new value, "zstd", to allow the compression of
full-page images using the compression method of the same name.
Compression is done using the default level recommended by the library,
as of ZSTD_CLEVEL_DEFAULT = 3. Some benchmarking has shown that it
could make sense to use a level lower for the FPI compression, like 1 or
2, as the compression rate did not change much with a bit less CPU
consumed, but any tests done would only cover few scenarios so it is
hard to come to a clear conclusion. Anyway, there is no reason to not
use the default level instead, which is the level recommended by the
library so it should be fine for most cases.
zstd outclasses easily pglz, and is better than LZ4 where one wants to
have more compression at the cost of extra CPU but both are good enough
in their own scenarios, so the choice between one or the other of these
comes to a study of the workload patterns and the schema involved,
mainly.
This commit relies heavily on 4035cd5, that reshaped the code creating
and restoring full-page writes to be aware of the compression type,
making this integration straight-forward.
This patch borrows some early work from Andrey Borodin, though the patch
got a complete rewrite.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220222231948.GJ9008@telsasoft.com
Both client-side compression and server-side compression are now
supported for zstd. In addition, a backup compressed by the server
using zstd can now be decompressed by the client in order to
accommodate the use of -Fp.
Jeevan Ladhe, with some edits by me.
Discussion: http://postgr.es/m/CA+Tgmobyzfbz=gyze2_LL1ZumZunmaEKbHQxjrFkOR7APZGu-g@mail.gmail.com
Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180. Developers may see faster failures by setting that
environment variable to some lesser number of seconds. In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180. This change raises the default for some briefer
timeouts. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
Commit 52e4f0cd47 didn't add tests for pg_dump support, so add a few tests
for it. Additionally, verify that catalogs are updated after few
ALTER PUBLICATION commands that modify row filters by using \d.
Reported-by: Tomas Vondra
Author: Shi yu, based on initial by Tomas Vondra
Reviewed-by: Euler Taveira and Amit Kapila
Discussion: https://postgr.es/m/6bdbd7fc-e81a-9a77-d963-24adeb95f29e@enterprisedb.com
The checks currently done at the startup of pg_upgrade on PGHOST and
PGHOSTADDR to avoid any attempts to access to an external cluster fail
setting those parameters to Windows paths or even temporary paths
prefixed by an '@', as it only considers as a valid path strings
beginning with a slash.
As mentioned by Andres, is_unixsock_path() is designed to detect such
cases, so, like any other code paths dealing with the same problem (psql
and libpq), use it rather than assuming that all valid paths are
prefixed with just a slash.
This issue has been found while testing the TAP tests of pg_upgrade
through the CI on Windows. This is a bug, but nobody has complained
about it since pg_upgrade exists so no backpatch is done, at least for
now.
Analyzed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/YeYj4DU5qY/rtKXT@paquier.xyz
pg_rewind generates and executes internally up to two commands to work
on the target cluster, depending on the options given by its caller:
- postgres -C to retrieve the value of restore_command, when using
-c/--restore-target-wal.
- postgres --single to enforce recovery once and get the target cluster
in a clean shutdown state.
Both commands have been applying incorrect quoting rules, which could
lead to failures when for example using a target data directory with
unexpected characters like CRLFs. Those commands are now generated with
PQExpBuffer, making use of string_utils.h to quote those commands as
they should. We may extend those commands in the future with more
options, so this makes any upcoming additions easier.
This is arguably a bug fix, but nobody has complained about the existing
code being a problem either, so no backpatch is done.
Extracted from a larger patch by the same author.
Author: Gunnar "Nick" Bluth
Discussion: https://postgr.es/m/7c59265d-ac50-b0aa-ca1e-65e8bd27642a@pro-open.de
When opening a WAL file smaller than XLOG_BLCKSZ (e.g. 0 bytes long) while
determining the wal_segment_size, pg_waldump checked errno, despite errno not
being set by the short read. Resulting in a bogus error message.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220214.181847.775024684568733277.horikyota.ntt@gmail.com
Backpatch: 11-, the bug was introducedin fc49e24fa
If the log streaming child process (thread on Windows) dies during
backup then the whole backup will be aborted at the end of the
backup. Instead, trap ungraceful termination of the log streaming
child and exit early. This also adds a TAP test for simulating this
by terminating the responsible backend.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/0F69E282-97F9-4DB7-8D6D-F927AA6340C8@yesql.se
Discussion: https://postgr.es/m/VI1PR83MB0189818B82C19059CB62E26199A89@VI1PR83MB0189.EURPRD83.prod.outlook.com
Commit 61081e75c introduced pg_rewind along with the test suite, which
ensured that subroutines didn't incur more than one test to plan. Now
that we no longer explicitly plan tests (since 549ec201d), we can use
the usual Test::More functions.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/AA527525-F0CC-4AA2-AF98-543CABFDAF59@yesql.se
I have not been able to reproduce the occasional failures of
019_replslot_limit.pl we are seeing in the buildfarm and not for lack of
trying. The additional logging and increased log level will hopefully help.
Will be reverted once the cause is identified.
Discussion: https://postgr.es/m/20220218231415.c4plkp4i3reqcwip@alap3.anarazel.de
This feature adds row filtering for publication tables. When a publication
is defined or modified, an optional WHERE clause can be specified. Rows
that don't satisfy this WHERE clause will be filtered out. This allows a
set of tables to be partially replicated. The row filter is per table. A
new row filter can be added simply by specifying a WHERE clause after the
table name. The WHERE clause must be enclosed by parentheses.
The row filter WHERE clause for a table added to a publication that
publishes UPDATE and/or DELETE operations must contain only columns that
are covered by REPLICA IDENTITY. The row filter WHERE clause for a table
added to a publication that publishes INSERT can use any column. If the
row filter evaluates to NULL, it is regarded as "false". The WHERE clause
only allows simple expressions that don't have user-defined functions,
user-defined operators, user-defined types, user-defined collations,
non-immutable built-in functions, or references to system columns. These
restrictions could be addressed in the future.
If you choose to do the initial table synchronization, only data that
satisfies the row filters is copied to the subscriber. If the subscription
has several publications in which a table has been published with
different WHERE clauses, rows that satisfy ANY of the expressions will be
copied. If a subscriber is a pre-15 version, the initial table
synchronization won't use row filters even if they are defined in the
publisher.
The row filters are applied before publishing the changes. If the
subscription has several publications in which the same table has been
published with different filters (for the same publish operation), those
expressions get OR'ed together so that rows satisfying any of the
expressions will be replicated.
This means all the other filters become redundant if (a) one of the
publications have no filter at all, (b) one of the publications was
created using FOR ALL TABLES, (c) one of the publications was created
using FOR ALL TABLES IN SCHEMA and the table belongs to that same schema.
If your publication contains a partitioned table, the publication
parameter publish_via_partition_root determines if it uses the partition's
row filter (if the parameter is false, the default) or the root
partitioned table's row filter.
Psql commands \dRp+ and \d <table-name> will display any row filters.
Author: Hou Zhijie, Euler Taveira, Peter Smith, Ajin Cherian
Reviewed-by: Greg Nancarrow, Haiying Tang, Amit Kapila, Tomas Vondra, Dilip Kumar, Vignesh C, Alvaro Herrera, Andres Freund, Wei Wang
Discussion: https://www.postgresql.org/message-id/flat/CAHE3wggb715X%2BmK_DitLXF25B%3DjE6xyNCH4YOwM860JR7HarGQ%40mail.gmail.com
Until this change pg_upgrade with output redirected to a file / pipe would end
up printing all files in the cluster. This has made check-world output
exceedingly verbose.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA+hUKGKjrV61ZVJ8OSag+3rKRmCZXPc03bDyWMqhXg3rdZ=fOw@mail.gmail.com
Following migration of Windows buildfarm members running TAP tests to
use of ucrt64 perl for those tests, special processing for msys perl is
no longer necessary and so is removed.
Backpatch to release 10
Discussion: https://postgr.es/m/c65a8781-77ac-ea95-d185-6db291e1baeb@dunslane.net
Ill-considered refactoring in 23a1c6578 led to progress_filename
sometimes pointing to data that had gone out of scope. The most
bulletproof fix is to hang onto a copy of whatever's passed in.
Compared to the work spent elsewhere per file, that's not very
expensive, plus we can skip it except in verbose logging mode.
Per buildfarm.
Discussion: https://postgr.es/m/20220212211316.GK31460@telsasoft.com
38bfae3 has mixed the "dump/" and "log/" subdirectories generated in
"pg_upgrade_output.d/", causing the internal dump files to be generated
in "log/" and the log files to be in "dump/", but the opposite should be
done. This was not directly an issue for pg_upgrade runs, as the
internal dump files were still picked up at the location of their
creation, but the newest version of the buildfarm client would have
reported the dump files instead of the log files on failures of
pg_upgrade.
Issue spotted while testing the TAP tests of pg_upgrade.
Move scanint8() to numutils.c and rename to pg_strtoint64(). We
already have a "16" and "32" version of that, and the code inside the
functions was aligned, so this move makes all three versions
consistent. The API is also changed to no longer provide the errorOK
case. Users that need the error checking can use strtoi64().
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
This adds to database objects the same version tracking that collation
objects have. There is a new pg_database column datcollversion that
stores the version, a new function
pg_database_collation_actual_version() to get the version from the
operating system, and a new subcommand ALTER DATABASE ... REFRESH
COLLATION VERSION.
This was not originally added together with pg_collation.collversion,
since originally version tracking was only supported for ICU, and ICU
on a database-level is not currently supported. But we now have
version tracking for glibc (since PG13), FreeBSD (since PG14), and
Windows (since PG13), so this is useful to have now.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f0ff3190-29a3-5b39-a179-fa32eee57db6%40enterprisedb.com
Some environments may compile with --with-lz4 while the command "lz4"
goes missing, causing two failures in the TAP tests of pg_verifybackup
(008_untar.pl and 010_client_untar.pl) as the code assumed that the
command always existed with a hardcoded value in src/Makefile.global.
Rather than this method, this adds a ./configure check based on
PGAC_PATH_PROGS() to find automatically the command and get an absolute
path to it.
Both tests need to be adjusted for the case where the command does not
exist, actually, as Makefile.global would set now LZ4 to an empty value
in this case. The TAP tests of pg_receivewal already do that.
Per report from buildfarm member copperhead, as an effect of dab2984.
The origin of the failure is actually babbbb5 that did not centralize
the check for the existence of a "lz4" command at ./configure to shave a
few cycles. Note that one just needs to tweak an environment to move
"lz4" out of the way to reproduce the problem, which is what I did to
test this change.
Per discussion with Robert Haas, Tom Lane, Andres Freund and myself.
Discussion: https://postgr.es/m/Ygc51WVAFGocSu4h@paquier.xyz
Depending on compiler version and optimization level, we might
get a complaint that lazy_scan_heap's "freespace" is used
uninitialized.
Compilers not aware that ereport(ERROR) doesn't return complained
about bbsink_lz4_new().
Assigning "-1" to a uint64 value has unportable results; fortunately,
the value of xlogreadsegno is unimportant when xlogreadfd is -1.
(It looks to me like there is no need for xlogreadsegno to be static
in the first place, but I didn't venture to change that.)
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
LZ4 compression can now be performed on the client using
pg_basebackup -Ft --compress client-lz4, and LZ4 decompression of
a backup compressed on the server can be performed on the client
using pg_basebackup -Fp --compress server-lz4.
Dipesh Pandit, reviewed and tested by Jeevan Ladhe and Tushar Ahuja,
with a few corrections - and some documentation - by me.
Discussion: http://postgr.es/m/CAN1g5_FeDmiA9D8wdG2W6Lkq5CpubxOAqTmd2et9hsinTJtsMQ@mail.gmail.com
LZ4 compression can be a lot faster than gzip compression, so users
may prefer it even if the compression ratio is not as good. We will
want pg_basebackup to support LZ4 compression and decompression on the
client side as well, and there is a pending patch for that, but it's
by a different author, so I am committing this part separately for
that reason.
Jeevan Ladhe, reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/CANm22Cg9cArXEaYgHVZhCnzPLfqXCZLAzjwTq7Fc0quXRPfbxA@mail.gmail.com
"pg_ctl stop/restart" checked that the postmaster PID is valid just
once, as a side-effect of sending the stop signal, and then would
wait-till-timeout for the postmaster.pid file to go away. This
neglects the case wherein the postmaster dies uncleanly after we
signal it. Similarly, once "pg_ctl promote" has sent the signal,
it'd wait for the corresponding on-disk state change to occur
even if the postmaster dies.
I'm not sure how we've managed not to notice this problem, but it
seems to explain slow execution of the 017_shm.pl test script on AIX
since commit 4fdbf9af5, which added a speculative "pg_ctl stop" with
the idea of making real sure that the postmaster isn't there. In the
test steps that kill-9 and then restart the postmaster, it's possible
to get past the initial signal attempt before kill() stops working
for the doomed postmaster. If that happens, pg_ctl waited till
PGCTLTIMEOUT before giving up ... and the buildfarm's AIX members
have that set very high.
To fix, include a "kill(pid, 0)" test (similar to what
postmaster_is_alive uses) in these wait loops, so that we'll
give up immediately if the postmaster PID disappears.
While here, I chose to refactor those loops out of where they were.
do_stop() and do_restart() can perfectly well share one copy of the
wait-for-stop loop, and it seems desirable to put a similar function
beside that for wait-for-promote.
Back-patch to all supported versions, since pg_ctl's wait logic
is substantially identical in all, and we're seeing the slow test
behavior in all branches.
Discussion: https://postgr.es/m/20220210023537.GA3222837@rfd.leadboat.com
The behavior I proposed, of matching case only when only keywords
are available to complete, turns out to be too cute. It adds about
as many problems as it removes. Simplify down to ilmari's original
proposal of just always matching case when completing a keyword.
Also, I noticed while testing this that we've pessimized the behavior
for qualified GUC names: the code is insisting that they be
double-quoted, which was not the case before. Fix that by treating
GUC names as verbatim matches instead of possibly-schema-qualified
names. (While it's tempting to try to split qualified GUC names
so that we *could* treat them with the schema-qualified-name code
path, that really isn't going to work in light of guc.c's willingness
to allow more than two name components.)
Dagfinn Ilmari Mannsåker and Tom Lane
Discussion: https://postgr.es/m/445692.1644018081@sss.pgh.pa.us
ReadStr returns allocated memory which the caller is responsible for
freeing when done with the string. This commit ensures that memory is
freed in one case which used ReadStr in a conditional. While the leak
might not be too concerning, this makes the code consistent across all
ReadStr callsites in ReadToc. Due to the lack of complaints of issues
in production from this, no backpatch is performed at this point.
Author: Bharath Rupireddy, Georgios Kokolatos
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/oZwKiUxFsVaetG2xOJp7Hwao8F1AKIdfFDQLNJrnwoaxmjyB-45r_aYmhgXHKLcMI3GT24m9L6HafSi2ns7WFxXe0mw2_tIJpD-Z3vb_eyI=@pm.me
Most calls of rmtree() report an error, and the code coming from 38bfae3
has introduced one caller where this is not done. The previous behavior
was to not fail hard if any log file generated is not properly unlinked
when cleaning up the contents generated once the upgrade has completed,
so add a cast to (void) to indicate the intention behind this new code.
Per gripe from Coverity.
Historically, the location of any files generated by pg_upgrade, as of
the per-database logs and internal dumps, has been the current working
directory, leaving all those files behind when using --retain or on a
failure.
Putting all those contents in a targeted subdirectory makes the whole
easier to debug, and simplifies the code in charge of cleaning up the
logs. Note that another reason is that this facilitates the move of
pg_upgrade to TAP with a fixed location for all the logs to grab if the
test fails repeatedly.
Initially, we thought about being able to specify the output directory
with a new option, but we have settled on using a subdirectory located
at the root of the new cluster's data folder, "pg_upgrade_output.d",
instead, as at the end the new data directory is the location of all the
data generated by pg_upgrade. There is a take with group permissions
here though: if the new data folder has been initialized with this
option, we need to create all the files and paths with the correct
permissions or a base backup taken after a pg_upgrade --retain would
fail, meaning that GetDataDirectoryCreatePerm() has to be called before
creating the log paths, before a couple of sanity checks on the clusters
and before getting the socket directory for the cluster's host settings.
The idea of the new location is based on a suggestion from Peter
Eisentraut.
Also thanks to Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson, Tom
Lane and Bruce Momjian for the discussion (in alphabetical order).
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211212025017.GN17618@telsasoft.com
Commit 8e2b6d45a0 added a new unprivileged user for testing
pg_basebackup, but omitted to add them to the cluster's authorized
logins, breaking Windows tests run without using Unix sockets.
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
The comment for PGAC_READLINE_VARIABLES says "Readline versions < 2.1
don't have rl_completion_append_character". It seems certain that such
versions are extinct in the wild, though; for sure there are none in the
buildfarm. Libedit has had this variable for at least twenty years too.
Also, tab-complete.c's behavior without it is quite unfriendly, since
we'll emit a space even when completion fails; but we've had no
complaints about that.
Therefore, let's assume this variable is always there, and drop the
configure check to save a few build cycles.
Discussion: https://postgr.es/m/147685.1643858911@sss.pgh.pa.us
Fix up recently-added test cases in 010_tab_completion.pl
so that they pass with the rather seriously broken libedit
found in Debian 10 (Buster).
Also, add a few more test cases to improve code coverage.
The total line coverage still looks pretty awful, because
we exercise only a few paths of the giant if-else chain in
psql_completion(). However, this now covers almost all of
the code that isn't in one of those if-blocks.
Discussion: https://postgr.es/m/960764.1643751011@sss.pgh.pa.us
When this code executed as superuser it appeared to work because no
system catalog lookups happened, but otherwise it crashes because there
is no transaction environment. Fix that.
Report and code change by me. Test case by Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/CA+TgmobiKLXne-2AVzYyWRiO8=rChBQ=7ywoxp=2SmcFw=oDDw@mail.gmail.com
When completing keywords that are offered alongside names obtained
from a query, preserve the user's choice of keyword case. This
would have been messy to do before 02b8048ba, but now it's fairly
simple. A complication is that we want keywords to be shown in
upper case in any tab-completion menus that include both keywords
and non-keywords, so we can't switch their case until enough has
been typed that only keyword(s) remain to be chosen.
Also, adjust some places where 02b8048ba thoughtlessly held over
a previous choice to display keywords in lower case. (I think
I got confused as to whether those words were keywords or variable
names, but they're the former.)
Dagfinn Ilmari Mannsåker and Tom Lane
Discussion: https://postgr.es/m/8735l41ynm.fsf@wibble.ilmari.org
This patch improves tab completion's ability to deal with
valid variant spellings of SQL identifiers. Notably:
* Unquoted upper-case identifiers are now downcased as the backend
would do, allowing them to be completed correctly.
* Tab completion can now match identifiers that are quoted even
though they don't need to be; for example "f<TAB> now completes
to "foo" if that's the only available name. Previously, only
names that require quotes would be offered.
* Schema-qualified identifiers are now supported where SQL syntax
allows it; many lesser-used completion rules neglected this.
* Completion operations that refer back to some previously-typed
name (for example, to complete names of columns belonging to a
previously-mentioned table) now allow variant spellings of the
previous name too.
In addition, performance of tab completion queries has been
improved for databases containing many objects, although
you'd only be likely to notice with a heavily-loaded server.
Authors of future tab-completion patches should note that this
commit changes many details about how tab completion queries
must be written:
* Tab completion queries now deal in raw object names; do not
use quote_ident().
* The name-matching restriction in a query must now be written
as "outputcol LIKE '%s'", not "substring(outputcol,1,%d)='%s'".
* The SchemaQuery mechanism has been extended so that it can
handle queries that refer back to a previous name. Most completion
queries that do that should be converted to SchemaQuery form.
Only consider using a literal query if the previous name can
never be schema-qualified. Don't use a literal query if the
name-to-be-completed can validly be schema-qualified, either.
* Use set_completion_reference() to specify which word is the previous
name to consider, for either a SchemaQuery or a literal query.
* If you want to offer some keywords in addition to a query result
(for example, offer COLUMN in addition to column names after
"ALTER TABLE t RENAME"), do not use the old hack of tacking the
keywords on with UNION. Instead use the new QUERY_PLUS macros
to write such keywords separately from the query proper. The
"addon" macro arguments that used to be used for this purpose
are gone.
* If your query returns something that's not a SQL identifier
(such as an attribute number or enum label), use the new
QUERY_VERBATIM macros to prevent the result from incorrectly
getting double-quoted. You may still need to use quote_literal
in such a query, too.
Tom Lane and Haiying Tang
Discussion: https://postgr.es/m/a63cbd45e3884cf9b3961c2a6a95dcb7@G08CNEXMBPEKD05.g08.fujitsu.local
Tushar Ahuja discovered that if you use both --compress and --gzip,
or --compress multiple times, the last instance of one of these
options doesn't in all cases overwrite the compression level set by
an earlier option. That's not a serious bug, but it also has nothing
to recommend it. Repair.
Discussion: http://postgr.es/m/CA+TgmoZfP=rsZB_9vDGfhuNgSu_M_09UWu8SjvsP65y_1pQFCg@mail.gmail.com
I intended to include a change to the "skip" count in the test
case, but it didn't get folded into the commit. Do that now,
so that non-zlib builds don't break.
The new file bbstreamer_gzip.c needs <unistd.h> to avoid
complaints about dup() not having a prototype, as per buildfarm
returns.
If you have a low-bandwidth connection between the client and the
server, it's reasonable to want to compress on the server side but
then decompress and extract the backup on the client side. This
commit allows you do to do just that.
Dipesh Pandit, with minor and mostly cosmetic changes by me.
Discussion: http://postgr.es/m/CAN1g5_HiSh8ajUMd4ePtGyCXo89iKZTzaNyzP_qv1eJbi4YHXA@mail.gmail.com
The server expects the compression level to be between 1 and 9, but
Z_DEFAULT_COMPRESSION is -1, so we must not try to send that value
to the server.
Because pg_basebackup's -R option is implemented on the client side,
it can't be used in combination with a backup target. Error out if
someone tries that, instead of silently ignoring the option.
Both issues were reported by Tushar Ahuja; patch by me.
Discussion: http://postgr.es/m/CA+TgmoaMwgdx8HxBjF8hmbohVvPL_0H5LqNrSq0uU+7BKp_Q2A@mail.gmail.com
Commit 0ad8032910 failed to update
the pg_basebackup documentation to mention that "client-" or
"server-" can now be prepended to the compression method name. Fix
it there, and also in the --help output that you get from running
the binary.
Also in the documentation, there's an old issue that the arguments to
--checkpoint shouldn't be marked as parameters, because "fast" and
"spread" are literal strings. Fix that too.
Dagfinn Ilmari Mannsåker, partly as per a report from
Shinoda Noriyoshi.
Discussion: http://postgr.es/m/PH7PR84MB1885C1CF433057807551172BEE5F9@PH7PR84MB1885.NAMPRD84.PROD.OUTLOOK.COM
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
pg_basebackup's --compression option now lets you write either
"client-gzip" or "server-gzip" instead of just "gzip" to specify
where the compression should be performed. If you write simply
"gzip" it's taken to mean "client-gzip" unless you also use
--target, in which case it is interpreted to mean "server-gzip",
because that's the only thing that makes any sense in that case.
To make this work, the BASE_BACKUP command now takes new
COMPRESSION and COMPRESSION_LEVEL options.
At present, pg_basebackup cannot decompress .gz files, so
server-side compression will cause a failure if (1) -Ft is not
used or (2) -R is used or (3) -D- is used without --no-manifest.
Along the way, I removed the information message added by commit
5c649fe153 which occurred if you
specified no compression level and told you that the default level
had been used instead. That seemed like more output than most
people would want.
Also along the way, this adds a check to the server for
unrecognized base backup options. This repairs a bug introduced
by commit 0ba281cb4b.
This commit also adds some new test cases for pg_verifybackup.
They take a server-side backup with and without compression, and
then extract the backup if we have the OS facilities available
to do so, and then run pg_verifybackup on the extracted
directory. That is a good test of the functionality added by
this commit and also improves test coverage for the backup target
patch (commit 3500ccc39b) and for
pg_verifybackup itself.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+Tgmoa-ST7fMLsVJduOB7Eub=2WjfpHS+QxHVEpUoinf4bOSg@mail.gmail.com
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
Commit 6df7a9698 wrote appendPQExpBuffer where it should have
written printfPQExpBuffer. This resulted in re-issuing the
previous query along with the desired one, which very accidentally
had no negative consequences except for some wasted cycles.
Back-patch to v14 where that came in.
Discussion: https://postgr.es/m/1714711.1642962663@sss.pgh.pa.us
Commit 5c649fe15 introduced a memory leak into pg_basebackup's
parse_compress_options. (I simplified nearby code while at it.)
Commit 9a974cbcb introduced a memory leak into pg_dump's
binary_upgrade_set_pg_class_oids.
Coverity also complained about a call of SnapBuildProcessChange that
ignored the result, unlike every other call of that function. This
is evidently intentional, so add a (void) cast to indicate that.
(It's also old, dating to b89e15105; I suppose the reason it showed
up now is 7a5f6b474's recent rearrangement of nearby code.)
The option --compress is extended to accept a compression method and an
optional compression level, as of the grammar METHOD[:LEVEL]. The
methods currently support are "none" and "gzip", for client-side
compression. Any of those methods use only an integer value for the
compression level, but any method implemented in the future could use
more specific keywords if necessary.
This commit keeps the logic backward-compatible. Hence, the following
compatibility rules apply for the new format of the option --compress:
* -z/--gzip is a synonym of --compress=gzip.
* --compress=NUM implies:
** --compress=none if NUM = 0.
** --compress=gzip:NUM if NUM > 0.
Note that there are also plans to extend more this grammar with
server-side compression.
Reviewed-by: Robert Haas, Magnus Hagander, Álvaro Herrera, David
G. Johnston, Georgios Kokolatos
Discussion: https://postgr.es/m/Yb3GEgWwcu4wZDuA@paquier.xyz
pg_basebackup now has a --target=TARGET[:DETAIL] option. If specfied,
it is sent to the server as the value of the TARGET option to the
BASE_BACKUP command. If DETAIL is included, it is sent as the value of
the new TARGET_DETAIL option to the BASE_BACKUP command. If the
target is anything other than 'client', pg_basebackup assumes that it
will now be the server's job to write the backup in a location somehow
defined by the target, and that it therefore needs to write nothing
locally. However, the server will still send messages to the client
for progress reporting purposes.
On the server side, we now support two additional types of backup
targets. There is a 'blackhole' target, which just throws away the
backup data without doing anything at all with it. Naturally, this
should only be used for testing and debugging purposes, since you will
not actually have a backup when it finishes running. More usefully,
there is also a 'server' target, so you can now use something like
'pg_basebackup -Xnone -t server:/SOME/PATH' to write a backup to some
location on the server. We can extend this to more types of targets
in the future, and might even want to create an extensibility
mechanism for adding new target types.
Since WAL fetching is handled with separate client-side logic, it's
not part of this mechanism; thus, backups with non-default targets
must use -Xnone or -Xfetch.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
In the new approach, all files across all tablespaces are sent in a
single COPY OUT operation. The CopyData messages are no longer raw
archive content; rather, each message is prefixed with a type byte
that describes its purpose, e.g. 'n' signifies the start of a new
archive and 'd' signifies archive or manifest data. This protocol
is significantly more extensible than the old approach, since we can
later create more message types, though not without concern for
backward compatibility.
The new protocol sends a few things to the client that the old one
did not. First, it sends the name of each archive explicitly, instead
of letting the client compute it. This is intended to make it easier
to write future patches that might send archives in a format other
that tar (e.g. cpio, pax, tar.gz). Second, it sends explicit progress
messages rather than allowing the client to assume that progress is
defined by the number of bytes received. This will help with future
features where the server compresses the data, or sends it someplace
directly rather than transmitting it to the client.
The old protocol is still supported for compatibility with previous
releases. The new protocol is selected by means of a new
TARGET option to the BASE_BACKUP command. Currently, the
only supported target is 'client'. Support for additional
targets will be added in a later commit.
Patch by me. The patch set of which this is a part has had review
and/or testing from Jeevan Ladhe, Tushar Ahuja, Suraj Kharage,
Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
The original coding (from c33869cc3) failed with "more than one row
returned by a subquery used as an expression" if there were unrelated
triggers of the same tgname on parent partitioned tables. (That's
possible because statement-level triggers don't get inherited.) Fix
by applying LIMIT 1 after sorting the candidates by inheritance level.
Also, wrap the subquery in a CASE so that we don't have to execute it at
all when the trigger is visibly non-inherited. Aside from saving some
cycles, this avoids the need for a confusing and undocumented NULLIF().
While here, tweak the format of the emitted query to look a bit
nicer for "psql -E", and add some explanation of this subquery,
because it badly needs it.
Report and patch by Justin Pryzby (with some editing by me).
Back-patch to v13 where the faulty code came in.
Discussion: https://postgr.es/m/20211217154356.GJ17618@telsasoft.com
Most tests invoking pg_basebackup themselves did not yet use -cfast, which
makes pg_basebackup take considerably longer. The only reason this didn't
cause the tests to take many minutes is that spread checkpoints only throttle
when writing out a buffer and there aren't that many dirty buffers in the
tests...
Discussion: https://postgr.es/m/20220117195711.xx4qbxutrrlmo2dg@alap3.anarazel.de
Currently, database OIDs, relfilenodes, and tablespace OIDs can all
change when a cluster is upgraded using pg_upgrade. It seems better
to preserve them, because (1) it makes troubleshooting pg_upgrade
easier, since you don't have to do a lot of work to match up files
in the old and new clusters, (2) it allows 'rsync' to save bandwidth
when used to re-sync a cluster after an upgrade, and (3) if we ever
encrypt or sign blocks, we would likely want to use a nonce that
depends on these values.
This patch only arranges to preserve relfilenodes and tablespace
OIDs. The task of preserving database OIDs is left for another patch,
since it involves some complexities that don't exist in these cases.
Database OIDs have a similar issue, but there are some tricky points
in that case that do not apply to these cases, so that problem is left
for another patch.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
The logic is similar to default_tablespace in some ways, so as no SET
queries on default_table_access_method are generated before dumping or
restoring an object (table or materialized view support table AMs) when
specifying this new option.
This option is useful to enforce the use of a default access method even
if some tables included in a dump use an AM different than the system's
default.
There are already two cases in the TAP tests of pg_dump with a table and
a materialized view that use a non-default table AM, and these are
extended that the new option does not generate SET clauses on
default_table_access_method.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211207153930.GR17618@telsasoft.com
"jsonlog" is a new value that can be added to log_destination to provide
logs in the JSON format, with its output written to a file, making it
the third type of destination of this kind, after "stderr" and
"csvlog". The format is convenient to feed logs to other applications.
There is also a plugin external to core that provided this feature using
the hook in elog.c, but this had to overwrite the output of "stderr" to
work, so being able to do both at the same time was not possible. The
files generated by this log format are suffixed with ".json", and use
the same rotation policies as the other two formats depending on the
backend configuration.
This takes advantage of the refactoring work done previously in ac7c807,
bed6ed3, 8b76f89 and 2d77d83 for the backend parts, and 72b76f7 for the
TAP tests, making the addition of any new file-based format rather
straight-forward.
The documentation is updated to list all the keys and the values that
can exist in this new format. pg_current_logfile() also required a
refresh for the new option.
Author: Sehrope Sarkuni, Michael Paquier
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
Since enum labels have to be single-quoted, this part of the
tab completion machinery got side-swiped by commit cd69ec66c.
A side-effect of that commit is that (at least with some versions
of Readline) the text string passed for completion will omit the
leading quote mark of the enum label literal. Libedit still acts
the same as before, though, so adapt COMPLETE_WITH_ENUM_VALUE so
that it can cope with either convention.
Also, when we fail to find any valid completion, set
rl_completion_suppress_quote = 1. Otherwise readline will
go ahead and append a closing quote, which is unwanted.
Per report from Peter Eisentraut. Back-patch to v13 where
cd69ec66c came in.
Discussion: https://postgr.es/m/8ca82d89-ec3d-8b28-8291-500efaf23b25@enterprisedb.com
By default, wait_for_catchup() waits for the replication connection
to reach the primary's write LSN. That's fine, but in an apparent
attempt to save one query round-trip, it was coded so that we
executed pg_current_wal_lsn() again during each probe query.
Thus, we presented the standby with a moving target to be reached.
(While the test script itself couldn't be causing the write LSN
to advance while it's blocked in wait_for_catchup(), it's plenty
plausible that background activity such as autovacuum is emitting
more WAL.) That could make the test take longer than necessary,
and potentially it could mask bugs by allowing the standby to process
more WAL than a strict interpretation of the test scenario allows.
So, change wait_for_catchup() to do it "by the book", explicitly
collecting the write LSN to wait for at the outset.
Also, various call sites were instructing wait_for_catchup() to
wait for the standby to reach the primary's insert LSN rather than
its write LSN. This also seems like a bad idea. While in most
test scenarios those are the same, if they are different then the
inserted-but-not-yet-written WAL is not presently available to the
standby. The test isn't doing anything to make it become so, so
again we have the potential for unwanted test delay, perhaps even
a test timeout. (Again, background activity would be needed to
make this more than a hypothetical problem.) Hence, change the
callers where necessary so that the wait target is always the
primary's write LSN.
While at it, simplify callers by making use of wait_for_catchup's
default arguments wherever possible (the preceding change makes
this possible in more places than it was before). And rewrite
wait_for_catchup's documentation a bit.
Patch by me; thanks to Julien Rouhaud for review.
Discussion: https://postgr.es/m/2368336.1641843098@sss.pgh.pa.us
The point of this patch is to reduce inclusion spam by not needing
to #include <netdb.h> or <pwd.h> in port.h (which is read by every
compile in our tree). To do that, we must remove port.h's
declarations of pqGetpwuid and pqGethostbyname.
pqGethostbyname is only used, and is only ever likely to be used,
in src/port/getaddrinfo.c --- which isn't even built on most
platforms, making pqGethostbyname dead code for most people.
Hence, deal with that by just moving it into getaddrinfo.c.
To clean up pqGetpwuid, invent a couple of simple wrapper
functions with less-messy APIs. This allows removing some
duplicate error-handling code, too.
In passing, remove thread.c from the MSVC build, since it
contains nothing we use on Windows.
Noted while working on 376ce3e40.
Discussion: https://postgr.es/m/1634252654444.90107@mit.edu
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
When we need to identify the home directory on non-Windows, first
consult getenv("HOME"). If that's empty or unset, fall back
on our previous method of checking the <pwd.h> database.
Preferring $HOME allows the user to intentionally point at some
other directory, and it seems to be in line with the behavior of
most other utilities. However, we shouldn't rely on it completely,
as $HOME is likely to be unset when running as a daemon.
Anders Kaseorg
Discussion: https://postgr.es/m/1634252654444.90107@mit.edu
This addresses some problems in the describe queries used for extended
statistics:
- Two schema qualifications for the text type were missing for \dX.
- The list of extended statistics listed for a table through \d was
ordered based on the object OIDs, but it is more consistent with the
other commands to order by namespace and then by object name.
- A couple of aliases were not used in \d. These are removed.
This is similar to commits 1f092a3 and 07f8a9e.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220107022235.GA14051@telsasoft.com
Backpatch-through: 14
pg_basebackup.c relies on the compression level to not be 0 to decide if
compression should be used, but 000f3adf missed the fact that the
default compression (Z_DEFAULT_COMPRESSION) is -1, which would be used
if specifying --gzip without --compress.
While on it, add some coverage for --gzip, as this is rather easy to
miss.
Reported-by: Christoph Berg
Discussion: https://postgr.es/m/YdhRDMLjabtXOnhY@msg.df7cb.de
pg_basebackup is able to use gzip to compress the contents of backups
with the tar format, but there were no tests for that. This adds a
minimalistic set of tests to check the contents of such base backups,
including sanity checks on the contents generated with gzip commands.
The tests are skipped if Postgres is compiled --without-zlib, and the
checks based on the gzip command are skipped if nothing can be found,
following the same model as the existing tests for pg_receivewal.
Reviewed-by: Georgios Kokolatos
Discussion: https://postgr.es/m/Yb3GEgWwcu4wZDuA@paquier.xyz
Since d62bcc8, the directory method of walmethods.c uses the compression
method to determine which code path to take. The tar method, used by
pg_basebackup --format=t, was inconsistent regarding that, as it relied
on the compression level to check if no compression or gzip should be
used. This commit makes the code more consistent as a whole in this
file, making the tar logic use a compression method rather than
assigning COMPRESSION_NONE that would be ignored.
The options of pg_basebackup are planned to be reworked but we are not
sure yet of the shape they should have as this has some dependency with
the integration of the server-side compression for base backups, so this
is left out for the moment. This change has as benefit to make easier
the future integration of new compression methods for the tar method of
walmethods.c, for the client-side compression.
Reviewed-by: Georgios Kokolatos
Discussion: https://postgr.es/m/Yb3GEgWwcu4wZDuA@paquier.xyz
The ACL is printed when you add + to the command, similarly to
various other psql backslash commands.
Along the way, move the code for this into describe.c,
where it is a better fit (and can share some code).
Pavel Luzanov, reviewed by Georgios Kokolatos
Discussion: https://postgr.es/m/6d722115-6297-bc53-bb7f-5f150e765299@postgrespro.ru
While user-defined triggers defined on a partitioned table have
a catalog definition for both it and its partitions, internal
triggers used by foreign keys defined on partitioned tables only
have a catalog definition for its partitions. This commit fixes
that so that partitioned tables get the foreign key triggers too,
just like user-defined triggers. Moreover, like user-defined
triggers, partitions' internal triggers will now also have their
tgparentid set appropriately. This is to allow subsequent commit(s)
to make the foreign key related events to be fired in some cases
using the parent table triggers instead of those of partitions'.
This also changes what tgisinternal means in some cases. Currently,
it means either that the trigger is an internal implementation object
of a foreign key constraint, or a "child" trigger on a partition
cloned from the trigger on the parent. This commit changes it to
only mean the former to avoid confusion. As for the latter, it can
be told by tgparentid being nonzero, which is now true both for user-
defined and foreign key's internal triggers.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Arne Roland <A.Roland@index.de>
Discussion: https://postgr.es/m/CA+HiwqG7LQSK+n8Bki8tWv7piHD=PnZro2y6ysU2-28JS6cfgQ@mail.gmail.com
Improve psql so that "ALTER TABLE foo VALIDATE CONSTRAINT <TAB>"
only offers not-convalidated entries. While it's not formally
wrong to offer validated ones, there's not much point either,
and it can save some typing if we incorporate this knowledge.
David Fetter, reviewed by Aleksander Alekseev
Discussion: https://postgr.es/m/20210427002433.GB17834@fetter.org
Get rid of the "username_subquery" mechanism in favor of doing
local lookups of role names from role OIDs. The PG backend isn't
terribly smart about scalar SubLinks in SELECT output lists,
so this offers a small performance improvement, at least in
installations with more than a couple of users. In any case
the old method didn't make for particularly readable SQL code.
While at it, I removed the various custom warning messages about
failing to find an object's owner, in favor of just fatal'ing
in the local lookup function. AFAIK there is no reason any
longer to treat that as anything but a catalog-corruption case,
and certainly no reason to make translators deal with a dozen
different messages where one would do. (If it turns out that
fatal() is indeed a bad idea, we can back off to issuing
pg_log_warning() and returning an empty string, resulting in
the same behavior as before, except more consistent.)
Also drop an entirely unnecessary sub-SELECT to check on the
pg_depend status of a sequence relation: we already have a
LEFT JOIN to fetch the row of interest in the FROM clause.
Discussion: https://postgr.es/m/2460369.1640903318@sss.pgh.pa.us
dumpPublication, dumpPublicationNamespace, dumpPublicationTable, and
dumpSubscription failed to check dataOnly. This is just a latent bug,
because pg_backup_archiver.c would filter out the ArchiveEntry later;
but they're wasting cycles in data-only dumps, and the omission might
become a live bug someday. In any case, it's not good to have some
dumpFoo functions do this and some not.
On the same reasoning, make dumpPublicationNamespace follow the
same pattern as every other dumpFoo function for checking the
DUMP_COMPONENT_DEFINITION flag. (Since 5209c0ba0, we wouldn't
even get here if that flag isn't set, so checking it is just
pro forma right now. But it might not be so forever.)
Since this is just cosmetic and/or future-proofing, no need for
back-patch.
In the wake of commits 05649b88c and 5209c0ba0, findComments() and
findSecLabels() no longer use their "Archive *fout" arguments,
so get rid of those.
While doing that, I noticed that there's no very good reason why
dumpCompositeTypeColComments() should be doing its own query to fetch
the column names of the composite type, when the calling function has
just fetched the same data. Tweak it to use that query result. This
probably doesn't save a lot for most people, because since 5209c0ba0
we won't get into this code at all unless the composite type has at
least one comment. Nonetheless, it's a wasted query.
\getenv fetches the value of an environment variable into a psql
variable. This is the inverse of the \setenv command that was added
over ten years ago. We'd not seen a compelling use-case for \getenv
at the time, but upcoming regression test refactoring provides a
sufficient reason to add it now.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
Coverity complained that parts of dumpFunc() and buildACLCommands()
were now unreachable, as indeed they are. Remove 'em.
In passing, make dumpFunc's handling of protrftypes less gratuitously
different from other fields.
This is an option consistent with what the other tools of src/bin/
(pg_checksums, pg_dump, pg_rewind and pg_basebackup) provide which is
useful for leveraging the I/O effort when testing things. This is not
to be used in a production environment.
All the regression tests of pg_upgrade are updated to use this new
option. This happens to cut at most a couple of seconds in environments
constrained on I/O, by avoiding a flush of data folder for the new
cluster upgraded.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/YbrhzuBmBxS/DkfX@paquier.xyz
Per discussion, we'll limit support for old servers to those branches
that can still be built easily on modern platforms, which as of now
is 9.2 and up.
Aside from removing code that is dead per the assumption of
server >= 9.2, I tweaked the startup warning for unsupported versions
to complain about too-old servers as well as too-new ones. The
warning that "Some psql features might not work" applies precisely
to both cases.
Discussion: https://postgr.es/m/2923349.1634942313@sss.pgh.pa.us
Server versions for which there was a plausible reason to
use this switch are all out of support now. Leaving it
around would accomplish little except to let careless DBAs
shoot themselves in the foot.
Discussion: https://postgr.es/m/556122.1639520324@sss.pgh.pa.us
Per discussion, we'll limit support for old servers to those branches
that can still be built easily on modern platforms, which as of now
is 9.2 and up.
Discussion: https://postgr.es/m/2923349.1634942313@sss.pgh.pa.us
Per discussion, we'll limit support for old servers to those branches
that can still be built easily on modern platforms, which as of now
is 9.2 and up. Remove over a thousand lines of code dedicated to
dumping from older server versions. (As in previous changes of
this sort, we aren't removing pg_restore's ability to read older
archive files ... though it's fair to wonder how that might be
tested nowadays.) This cleans up some dead code left behind by
commit 989596152.
Discussion: https://postgr.es/m/2923349.1634942313@sss.pgh.pa.us
We need to replace windows-style \ path separators with / when putting socket
directories either in postgresql.conf or libpq connection strings, otherwise
they are interpreted as escapes.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/4da250a5-4222-1522-f14d-8a72bcf7e38e@enterprisedb.com
The idea here is that when a performance problem is known to have
occurred at a certain point in time, it's a good thing if there is
some information available from the logs to help figure out what
might have happened around that time.
This change attracted an above-average amount of dissent, because
it means that a server with default settings will produce some amount
of log output even if nothing has gone wrong. However, by my count,
the mailing list discussion had about twice as many people in favor
of the change as opposed. The reasons for believing that the extra
log output is not an issue in practice are: (1) the rate at which
messages can be generated by this setting is bounded to one every
few minutes on a properly-configured system and (2) production
systems tend to have a lot more junk in the log from that due to
failed connection attempts, ERROR messages generated by application
activity, and the like.
Bharath Rupireddy, reviewed by Fujii Masao and by me. Many other
people commented on the thread, but as far as I can see that was
discussion of the merits of the change rather than review of the
patch.
Discussion: https://postgr.es/m/CALj2ACX-rW_OeDcp4gqrFUAkf1f50Fnh138dmkd0JkvCNQRKGA@mail.gmail.com
Historically we've put type "char" into the S (String) typcategory,
although calling it a string is a stretch considering it can only
store one byte. (In our actual usage, it's more like an enum.)
This choice now seems wrong in view of the special heuristics
that parse_func.c and parse_coerce.c have for TYPCATEGORY_STRING:
it's not a great idea for "char" to have those preferential casting
behaviors.
Worse than that, recent patches inventing special-purpose types
like pg_node_tree have assigned typcategory S to those types,
meaning they also get preferential casting treatment that's designed
on the assumption that they can hold arbitrary text.
To fix, invent a new category TYPCATEGORY_INTERNAL for internal-use
types, and assign that to all these types. I used code 'Z' for
lack of a better idea ('I' was already taken).
This change breaks one query in psql/describe.c, which now needs to
explicitly cast a catalog "char" column to text before concatenating
it with an undecorated literal. Also, a test case in contrib/citext
now needs an explicit cast to convert citext to "char". Since the
point of this change is to not have "char" be a surprisingly-available
cast target, these breakages seem OK.
Per report from Ian Campbell.
Discussion: https://postgr.es/m/2216388.1638480141@sss.pgh.pa.us
In parallel mode, pg_dump tries to order the table-data-dumping
jobs with the largest tables first. However, it was only
consulting the pg_class.relpages value to determine table size.
This ignores TOAST data, and so we could make poor scheduling
decisions in cases where some large tables are mostly TOASTed
data while others have very little. To fix, add in the relpages
value for the TOAST table as well.
This patch also fixes a potential integer-overflow issue that
could result in poor scheduling on machines where off_t is
only 32 bits wide. Such platforms are probably extinct in the
wild, but we do still nominally support them, so repair.
Per complaint from Hans Buschmann.
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
For objects such as functions, pg_dump issues the same secondary
data-collection query against each object to be dumped. This can't
readily be refactored to avoid the repetitive queries, but we can
PREPARE these queries to reduce planning costs.
This patch applies the idea to functions, aggregates, operators, and
data types. While it could be carried further, the remaining sorts of
objects aren't likely to appear in typical databases enough times to
be worth worrying over. Moreover, doing the PREPARE is likely to be a
net loss if there aren't at least some dozens of objects to apply the
prepared query to.
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Instead of issuing a secondary data-collection query against each
table to be dumped, issue just one query, with a WHERE clause
restricting it to be applied to only the tables we intend to dump.
Likewise for indexes, constraints, and triggers. This greatly
reduces the number of queries needed to dump a database containing
many tables. It might seem that WHERE clauses listing many target
OIDs could be inefficient, but at least on recent server versions
this provides a very substantial speedup.
(In principle the same thing could be done with other object types
such as functions; but that would require significant refactoring
of pg_dump, so those will be tackled in a different way in a
following patch.)
The new WHERE clauses depend on the unnest() function, which is
only present in 8.4 and above. We could implement them differently
for older servers, but there is an ongoing discussion that will
probably result in dropping pg_dump support for servers before 9.2,
so that seems like it'd be wasted work. For now, just bump the
server version check to require >= 8.4, without stopping to remove
any of the code that's thereby rendered dead. We'll mop that
situation up soon.
Patch by me, based on an idea from Andres Freund.
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Avoid calling pg_get_partkeydef(), pg_get_expr(relpartbound),
and regtypeout until we have lock on the relevant tables.
The existing coding is at serious risk of failure if there
are any concurrent DROP TABLE commands going on --- including
drops of other sessions' temp tables.
Arguably this is a bug fix that should be back-patched, but it's
moderately invasive and we've not had all that many complaints
about such failures. Let's just put it in HEAD for now.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Throw away most of the existing logic for this, as it was very
inefficient thanks to expensive sub-selects executed to collect
ACL data that we very possibly would have no interest in dumping.
Reduce the ACL handling in the initial per-object-type queries
to be just collection of the catalog ACL fields, as it was
originally. Fetch pg_init_privs data separately in a single
scan of that catalog, and do the merging calculations on the
client side. Remove the separate code path used for pre-9.6
source servers; there is no good reason to treat them differently
from newer servers that happen to have empty pg_init_privs.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Split the DumpableObject.dump bitmask field into separate bitmasks
tracking which components are requested to be dumped (in the
existing "dump" field) and which components exist for the particular
object (in the new "components" field). This gets rid of some
klugy and easily-broken logic that involved setting bits and later
clearing them. More importantly, it restores the originally intended
behavior that pg_dump's secondary data-gathering queries should not
be executed for objects we have no interest in dumping. That
optimization got broken when the dump flag was turned into a bitmask,
because irrelevant bits tended to remain set in many cases. Since
the "components" field starts from a minimal set of bits and is
added onto as needed, ANDing it with "dump" provides a reliable
indicator of what we actually have to dump, without having to
complicate the logic that manages the request bits. This makes
a significant difference in the number of queries needed when,
for example, there are many functions in extensions.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Checking for RELKIND_MATVIEW was forgotten in
guessConstraintInheritance(). This isn't a live problem, since it is
checked in flagInhTables() which relkinds can have parents, and those
entries will have numParents==0 after that. But after discussion it
was felt that this place should be kept consistent with
flagInhTables() and flagInhAttrs().
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/a574c8f1-9c84-93ad-a9e5-65233d6fc00f@enterprisedb.com
Previously, pg_waldump would not display its statistics summary if it
got interrupted by SIGINT (or say a simple Ctrl+C). It gains with this
commit a signal handler for SIGINT, trapping the signal to exit at the
earliest convenience to allow a display of the stats summary before
exiting. This makes the reports more interactive, similarly to strace
-c.
This new behavior makes the combination of the options --stats and
--follow much more useful, so as the user will get a report for any
invocation of pg_waldump in such a case. Information about the LSN
range of the stats computed is added as a header to the report
displayed.
This implementation comes from a suggestion by Álvaro Herrera and
myself, following a complaint by the author of this patch about --stats
and --follow not being useful together originally.
As documented, this is not supported on Windows, though its support
would be possible by catching the terminal events associated to Ctrl+C,
for example (this may require a more centralized implementation, as
other tools could benefit from a common API).
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACUUx3PcK2z9h0_m7vehreZAUbcmOky9WSEpe8TofhV=PQ@mail.gmail.com
The existing pg_upgrade/test.sh and the buildfarm code have been holding
the same set of SQL queries when doing cross-version upgrade tests to
adapt the objects created by the regression tests before the upgrade
(mostly, incompatible or non-existing objects need to be dropped from
the origin, perhaps re-created).
This moves all those SQL queries into a new, separate, file with a set
of \if clauses to handle the version checks depending on the old version
of the cluster to-be-upgraded.
The long-term plan is to make the buildfarm code re-use this new SQL
file, so as committers are able to fix any compatibility issues in the
tests of pg_upgrade with a refresh of the core code, without having to
poke at the buildfarm client. Note that this is only able to handle the
main regression test suite, and that nothing is done yet for contrib
modules yet (these have more issues like their database names).
A backpatch down to 10 is done, adapting the version checks as this
script needs to be only backward-compatible, so as it becomes possible
to clean up a maximum amount of code within the buildfarm client.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 10
Readline's meta-# command is supposed to insert a comment marker
at the start of the current line. However, the default marker is
"#" which is entirely unhelpful for SQL. Set it to "-- " instead.
(This setting can still be overridden in one's ~/.inputrc file,
so this change won't affect people who have already taken steps
to make the command useful.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
If we've not yet collected any non-whitespace, non-comment token for a
new query, flush the current input line to history before reading
another line. This aligns psql's history behavior with the observation
that lines containing only comments are generally not thought of as
being part of the next query. psql's prompting behavior is consistent
with that view, too, since it won't change the prompt until you
enter something that's neither whitespace nor a "--" comment.
Greg Nancarrow, simplified a bit by me
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
This commit moves the timestamp computation of the control file within
the routine of src/common/ in charge of updating the backend's control
file, which is shared by multiple frontend tools (pg_rewind,
pg_checksums and pg_resetwal) and the backend itself.
This change has as direct effect to update the control file's timestamp
when writing the control file in pg_rewind and pg_checksums, something
that is helpful to keep track of control file updates for those
operations, something also tracked by the backend at startup within its
logs. This part is arguably a bug, as ControlFileData->time should be
updated each time a new version of the control file is written, but this
is a behavior change so no backpatch is done.
Author: Amul Sul
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/CAAJ_b97nd_ghRpyFV9Djf9RLXkoTbOUqnocq11WGq9TisX09Fw@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
The following improvements are done:
- Addition of type completion for ALTER SEQUENCE AS.
- Ignore ALTER for transforms, as the command is not supported.
- Addition of more completion for ALTER FOREIGN DATA WRAPPER.
- Addition of options related to columns in ALTER VIEW.
This is a continuation of the work done in 0cd6d3b.
Author: Ken Kato
Discussion: https://postgr.es/m/9497ae9ca1b31eb9b1e97aded1c2ab07@oss.nttdata.com
If an error occurs when writing the LZ4 file header, LZ4F_compressEnd()
was called in the error code path of write(), followed by
LZ4F_freeCompressionContext() to finish the cleanup. The code as-is was
not broken, but the LZ4F_compressEnd() proves to not be necessary as
there are no contents to flush at this stage, so remove it.
Per gripe from Jeevan Ladhe and Robert Haas.
Discussion: https://postgr.es/m/CAOgcT0PE33wbD7giAT1OSkNJt=p-vu8huq++qh=ny9O=SCP5aA@mail.gmail.com
When a stored expression depends on a user-defined cast, the backend
records the dependency as being on the cast's implementation function
--- or indeed, if there's no cast function involved but just
RelabelType or CoerceViaIO, no dependency is recorded at all. This
is problematic for pg_dump, which is at risk of dumping things in the
wrong order leading to restore failures. Given the lack of previous
reports, the risk isn't that high, but it can be demonstrated if the
cast is used in some view whose rowtype is then used as an input or
result type for some other function. (That results in the view
getting hoisted into the functions portion of the dump, ahead of
the cast.)
A logically bulletproof fix for this would require including the
cast's OID in the parsed form of the expression, whence it could be
extracted by dependency.c, and then the stored dependency would force
pg_dump to do the right thing. Such a change would be fairly invasive,
and certainly not back-patchable. Moreover, since we'd prefer that
an expression using cast syntax be equal() to one doing the same
thing by explicit function call, the cast OID field would have to
have special ignored-by-comparisons semantics, making things messy.
So, let's instead fix this by a very simple hack in pg_dump: change
the object-type priority order so that casts are initially sorted
before functions, immediately after types. This fixes the problem
in a fairly direct way for casts that have no implementation function.
For those that do, the implementation function will be hoisted to just
before the cast by the dependency sorting step, so that we still have
a valid dump order. (I'm not sure that this provides a full guarantee
of no problems; but since it's been like this for many years without
any previous reports, this is probably enough to fix it in practice.)
Per report from Дмитрий Иванов.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPL5KHoGa3uvyKp6z6m48LwCnTsK+LRQ_mcA4uKGfqAVSEjV_A@mail.gmail.com
If a table contains a generated column that's preceded by a dropped
column, dumpTableData_insert failed to account for the dropped
column, and would emit DEFAULT placeholder(s) in the wrong column(s).
This resulted in failures at restore time. The default COPY code path
did not have this bug, likely explaining why it wasn't noticed sooner.
While we're fixing this, we can be a little smarter about the
situation: (1) avoid unnecessarily fetching the values of generated
columns, (2) omit generated columns from the output, too, if we're
using --column-inserts. While these modes aren't expected to be
as high-performance as the COPY path, we might as well be as
efficient as we can; it doesn't add much complexity.
Per report from Дмитрий Иванов.
Back-patch to v12 where generated columns came in.
Discussion: https://postgr.es/m/CAPL5KHrkBniyQt5e1rafm5DdXvbgiiqfEQEJ9GjtVzN71Jj5pA@mail.gmail.com
A couple of spots can benefit from an added errdetail(), which matches
what we were already doing in other places; and those that cannot
withstand errdetail() can get a more descriptive primary message.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/CALj2ACV+cX1eM03GfcA=ZMLXh5fSn1X1auJLz3yuS1duPSb9QA@mail.gmail.com
Previously it was impossible to terminate these programs via control-C
while they were prompting for a password. We can fix that trivially
for their initial password prompts, by moving setup of the SIGINT
handler from just before to just after their initial GetConnection()
calls.
This fix doesn't permit escaping out of later re-prompts, but those
should be exceedingly rare, since the user's password or the server's
authentication setup would have to have changed meanwhile. We
considered applying a fix similar to commit 46d665bc2, but that
seemed more complicated than it'd be worth. Moreover, this way is
back-patchable, which that wasn't.
The misbehavior exists in all supported versions, so back-patch to all.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
This fills in the work left un-done by 5f1148224. \prompt can
be canceled out of now, and so can password prompts issued during
\connect. (We don't need to do anything for password prompts
issued during startup, because we aren't yet trapping SIGINT
at that point.)
Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
The following improvements are done:
- Addition of some tab completion for CREATE DOMAIN.
- Addition of some tab completion for CREATE TRANSFORM.
- Addition of type completion for CREATE SEQUENCE AS.
Author: Ken Kato
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/8d370135aef066659eef8e8fbfa6315b@oss.nttdata.com
Up to now, you couldn't escape out of psql's \password command
by typing control-C (or other local spelling of SIGINT). This
is pretty user-unfriendly, so improve it. To do so, we have to
modify the functions provided by pg_get_line.c; but we don't
want to mess with psql's SIGINT handler setup, so provide an
API that lets that handler cause the cancel to occur.
This relies on the assumption that we won't do any major harm by
longjmp'ing out of fgets(). While that's obviously a little shaky,
we've long had the same assumption in the main input loop, and few
issues have been reported.
psql has some other simple_prompt() calls that could usefully
be improved the same way; for now, just deal with \password.
Nathan Bossart, minor tweaks by me
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
Earlier versions of PostgreSQL featured a version of pg_basebackup
that wanted to edit tar archives but was too dumb to parse them
properly. The server made things easier for the client by failing
to add the two blocks of zero bytes that ought to end a tar file,
leaving it up to the client to do that.
But since commit 23a1c6578c, we
don't need this hack any more, because pg_basebackup is now smarter
and can parse tar files even if they are properly terminated! So
change the server to always properly terminate the tar files. Older
versions of pg_basebackup can't talk to new servers anyway, so
there's no compatibility break.
On the pg_basebackup side, we see still need to add the terminating
zero bytes if we're talking to an older server, but not when the
server is v15+. Hopefully at some point we'll be able to remove
some of this compatibility cruft, but it seems best to hang on to
it for now.
In passing, add a file header comment to bbstreamer_tar.c, to make
it clearer what's going on here.
Discussion: http://postgr.es/m/CA+TgmoZbNzsWwM4BE5Jb_qHncY817DYZwGf+2-7hkMQ27ZwsMQ@mail.gmail.com
Commit 5a2832465f introduced some enums to represent all tables in schema
publications and used REL in their names. Use TABLE instead of REL in
those enums to avoid confusion with other objects like SEQUENCES that can
be part of a publication in the future.
In the passing, (a) Change one of the newly introduced error messages to
make it consistent for Create and Alter commands, (b) add missing alias in
one of the SQL Statements that is used to print publications associated
with the table.
Reported-by: Tomas Vondra, Peter Smith
Author: Vignesh C
Reviewed-by: Hou Zhijie, Peter Smith
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ%40mail.gmail.com
Commit 23a1c6578c improved
pg_basebackup's ability to parse tar archives, but also arranged
to parse them only when we need to make some modification to the
contents of the archive. That's a problem, because the server
doesn't actually terminate tar archives. When the new parsing
logic was engaged, pg_basebackup would properly terminate the
tar file, but when it was skipped, pg_basebackup would just write
whatever it got from the server, meaning that the terminator
was missing.
Most versions of tar are willing to overlook the missing terminator, but
the AIX buildfarm animals were not. Fix by inventing a new kind of
bbstreamer that just blindly adds a terminator, and using it whenever we
don't parse the tar archive.
Discussion: http://postgr.es/m/CA+TgmoZbNzsWwM4BE5Jb_qHncY817DYZwGf+2-7hkMQ27ZwsMQ@mail.gmail.com
Re-ordering the #include's is a bit problematic here because
libpq/libpq-be.h needs to include <openssl/ssl.h>. Instead,
let's #undef the unwanted macro after all the #includes.
This is definitely uglier than the other way, but it should
work despite possible future header rearrangements.
(A look at the openssl headers indicates that X509_NAME is the
only conflicting symbol that we use.)
In passing, remove a related but long-incorrect comment in
pg_backup_archiver.h.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
pg_basebackup knows how to do quite a few things with a backup that it
gets from the server, like just write out the files, or compress them
first, or even parse the tar format and inject a modified
postgresql.auto.conf file into the archive generated by the server.
Unforatunely, this makes pg_basebackup.c a very large source file, and
also somewhat difficult to enhance, because for example the knowledge
that the server is sending us a 'tar' file rather than some other sort
of archive is spread all over the place rather than centralized.
In an effort to improve this situation, this commit invents a new
'bbstreamer' abstraction. Each archive received from the server is
fed to a bbstreamer which may choose to dispose of it or pass it
along to some other bbstreamer. Chunks may also be "labelled"
according to whether they are part of the payload data of a file
in the archive or part of the archive metadata.
So, for example, if we want to take a tar file, modify the
postgresql.auto.conf file it contains, and the gzip the result
and write it out, we can use a bbstreamer_tar_parser to parse the
tar file received from the server, a bbstreamer_recovery_injector
to modify the contents of postgresql.auto.conf, a
bbstreamer_tar_archiver to replace the tar headers for the file
modified in the previous step with newly-built ones that are
correct for the modified file, and a bbstreamer_gzip_writer to
gzip and write the resulting data. Only the objects with "tar"
in the name know anything about the tar archive format, and in
theory we could re-archive using some other format rather than
"tar" if somebody wanted to write the code.
These chances do add a substantial amount of code, but I think the
result is a lot more maintainable and extensible. pg_basebackup.c
itself shrinks by roughly a third, with a lot of the complexity
previously contained there moving into the newly-added files.
Patch by me. The larger patch series of which this is a part has been
reviewed and tested at various times by Andres Freund, Sumanta
Mukherjee, Dilip Kumar, Suraj Kharage, Dipesh Pandit, Tushar Ahuja,
Mark Dilger, Sergei Kornilov, and Jeevan Ladhe.
Discussion: https://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoZvqk7UuzxsX1xjJRmMGkqoUGYTZLDCH8SmU1xTPr1Xig@mail.gmail.com
Expand the checks of toasted attributes to complain if the rawsize is
overlarge. For compressed attributes, also complain if compression
appears to have expanded the attribute or if the compression method is
invalid.
Mark Dilger, reviewed by Justin Pryzby, Alexander Alekseev, Heikki
Linnakangas, Greg Stark, and me.
Discussion: http://postgr.es/m/8E42250D-586A-4A27-B317-8B062C3816A8@enterprisedb.com
Completion is added for more object types, like domain constraints, text
search-ish objects or policies. Moreover, the area is reorganized,
changing the list of objects supported by COMMENT to be in the same
order as the documentation to ease future additions.
Author: Ken Kato
Reviewed-by: Fujii Masao, Shinya Kato, Suraj Khamkar, Michael Paquier
Discussion: https://postgr.es/m/6e0c2f3f657b229bea32d098d118f307@oss.nttdata.com
pg_receivewal gains a new option, --compression-method=lz4, available
when the code is compiled with --with-lz4. Similarly to gzip, this
gives the possibility to compress archived WAL segments with LZ4. This
option is not compatible with --compress.
The implementation uses LZ4 frames, and is compatible with simple lz4
commands. Like gzip, using --synchronous ensures that any data will be
flushed to disk within the current .partial segment, so as it is
possible to retrieve as much WAL data as possible even from a
non-completed segment (this requires completing the partial file with
zeros up to the WAL segment size supported by the backend after
decompression, but this is the same as gzip).
The calculation of the streaming start LSN is able to transparently find
and check LZ4-compressed segments. Contrary to gzip where the
uncompressed size is directly stored in the object read, the LZ4 chunk
protocol does not store the uncompressed data by default. There is
contentSize that can be used with LZ4 frames by that would not help if
using an archive that includes segments compressed with the defaults of
a "lz4" command, where this is not stored. So, this commit has taken
the most extensible approach by decompressing the already-archived
segment to check its uncompressed size, through a blank output buffer in
chunks of 64kB (no actual performance difference noticed with 8kB, 16kB
or 32kB, and the operation in itself is actually fast).
Tests have been added to verify the creation and correctness of the
generated LZ4 files. The latter is achieved by the use of command
"lz4", if found in the environment.
The tar-based WAL method in walmethods.c, used now only by
pg_basebackup, does not know yet about LZ4. Its code could be extended
for this purpose.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Jian Guo, Magnus Hagander, Dilip Kumar
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
The option name was incorrect in one of the error messages, and the
short option 'I' was used in the code but we did not intend things to be
this way. While on it, fix the documentation to refer to a "method",
and not a "level.
Oversights in commit d62bcc8, that I have detected after more review of
the LZ4 patch for pg_receivewal.
pg_receivewal includes since cada1af the option --compress, to allow the
compression of WAL segments using gzip, with a value of 0 (the default)
meaning that no compression can be used.
This commit introduces a new option, called --compression-method, able
to use as values "none", the default, and "gzip", to make things more
extensible. The case of --compress=0 becomes fuzzy with this option
layer, so we have made the choice to make pg_receivewal return an error
when using "none" and a non-zero compression level, meaning that the
authorized values of --compress are now [1,9] instead of [0,9]. Not
specifying --compress with "gzip" as compression method makes
pg_receivewal use the default of zlib instead (Z_DEFAULT_COMPRESSION).
The code in charge of finding the streaming start LSN when scanning the
existing archives is refactored and made more extensible. While on it,
rename "compression" to "compression_level" in walmethods.c, to reduce
the confusion with the introduction of the compression method, even if
the tar method used by pg_basebackup does not rely on the compression
method (yet, at least), but just on the compression level (this area
could be improved more, actually).
This is in preparation for an upcoming patch that adds LZ4 support to
pg_receivewal.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Jian Guo, Magnus Hagander, Dilip Kumar,
Robert Haas
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
Previously failures of initial connection and logfile open caused pgbench
to proceed the benchmarking, report the incomplete results and exit with
status 2. It didn't make sense to proceed the benchmarking even when
pgbench could not start as prescribed.
This commit improves pgbench so that early errors that occur when
starting benchmark such as those failures should make pgbench exit
immediately with status 1.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870057375ACA8A73099C649F5349@TYCPR01MB5870.jpnprd01.prod.outlook.com
pg_receivewal is able to follow a timeline switch, but this was not
tested. This test uses an empty archive location with a restart done
from a slot, making its implementation a tad simpler than if we would
reuse an existing archive directory.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
Rearrange src/test/perl/README so that the first section is more
clearly "how to run these tests", and the rest "how to write new
tests". Add some basic info there about debugging test failures.
Then, add cross-refs to that READNE from other READMEs that
describe how to run TAP tests.
Per suggestion from Kevin Burke, though this is not his original
patch.
Discussion: https://postgr.es/m/CAKcy5eiSbwiQnmCfnOnDCVC7B8fYyev3E=6pvvECP9pLE-Fcuw@mail.gmail.com
This commit improves the speed of those tests by 25~30%, using some
simple ideas to reduce the amount of data written by pg_receivewal:
- Use a segment size of 1MB. While reducing the amount of data zeroed
by pg_receivewal for the new segments, this improves the code coverage
with a non-default segment size.
- In the last test involving a slot's restart_lsn, generate a checkpoint
to advance the redo LSN and the WAL retained by the slot created,
reducing the number of segments that need to be archived. This counts
for most of the gain.
- Minimize the amount of data inserted into the dummy table.
Reviewed-by: Ronan Dunklau
Discussion: https://postgr.es/m/YXqYKAdVEqmyTltK@paquier.xyz
As 98ec35b has proved, there has never been any coverage in this area of
the code. This commit adds a new TAP test with a template database that
includes a small set of shared dependencies copied to a new database.
The test is added in createdb, where we have never tested that -T
generates a query with TEMPLATE, either.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/YXDTl+PfSnqmbbkE@paquier.xyz
A new option "FOR ALL TABLES IN SCHEMA" in Create/Alter Publication allows
one or more schemas to be specified, whose tables are selected by the
publisher for sending the data to the subscriber.
The new syntax allows specifying both the tables and schemas. For example:
CREATE PUBLICATION pub1 FOR TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
OR
ALTER PUBLICATION pub1 ADD TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
A new system table "pg_publication_namespace" has been added, to maintain
the schemas that the user wants to publish through the publication.
Modified the output plugin (pgoutput) to publish the changes if the
relation is part of schema publication.
Updates pg_dump to identify and dump schema publications. Updates the \d
family of commands to display schema publications and \dRp+ variant will
now display associated schemas if any.
Author: Vignesh C, Hou Zhijie, Amit Kapila
Syntax-Suggested-by: Tom Lane, Alvaro Herrera
Reviewed-by: Greg Nancarrow, Masahiko Sawada, Hou Zhijie, Amit Kapila, Haiying Tang, Ajin Cherian, Rahila Syed, Bharath Rupireddy, Mark Dilger
Tested-by: Haiying Tang
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ@mail.gmail.com
Prior to this patch, when running pg_receivewal, the streaming start
point would be the current location of the archives if anything is
found in the local directory where WAL segments are written, and
pg_receivewal would fall back to the current WAL flush location if there
are no archives, as of the result of an IDENTIFY_SYSTEM command.
If for some reason the WAL files from pg_receivewal were moved, it is
better to try a restart where we left at, which is the replication
slot's restart_lsn instead of skipping right to the current flush
location, to avoid holes in the WAL backed up. This commit changes
pg_receivewal to use the following sequence of methods to determine the
starting streaming LSN:
- Scan the local archives.
- Use the slot's restart_lsn, if supported by the backend and if a slot
is defined.
- Fallback to the current flush LSN as reported by IDENTIFY_SYSTEM.
To keep compatibility with older server versions, we only attempt to use
READ_REPLICATION_SLOT if the backend version is at least 15, and
fallback to the older behavior of streaming from the current flush
LSN if the command is not supported.
Some TAP tests are added to cover this feature.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
I found these by running pg_dump under "valgrind --leak-check=full".
The changes in flagInhIndexes() and getIndexes() replace allocation of
an array of which we use only some elements by individual allocations
of just the actually-needed objects. The previous coding wasted some
memory, but more importantly it confused valgrind's leak tracking.
collectComments() and collectSecLabels() remain major blots on
the valgrind report, because they don't PQclear their query
results, in order to avoid a lot of strdup's. That's a dubious
tradeoff, but I'll leave it alone here; an upcoming patch will
modify those functions enough to justify changing the tradeoff.
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
Create a hash table that indexes dumpable objects by CatalogId
(that is, catalog OID + object OID). Use this to replace the
former catalogIdMap array, as well as various other single-
catalog index arrays, and also the extension membership map.
In principle this should be faster for databases with many objects,
since lookups are now O(1) not O(log N). However, it seems that these
lookups are pretty much negligible in context, so that no overall
performance change can be measured. But having only one lookup
data structure to maintain makes the code simpler and more flexible,
so let's do it anyway.
Discussion: https://postgr.es/m/2595220.1634855245@sss.pgh.pa.us
Non-global default privilege entries should be dumped as-is,
not made relative to the default ACL for their object type.
This would typically only matter if one had revoked some
on-by-default privileges in a global entry, and then wanted
to grant them again in a non-global entry.
Per report from Boris Korzun. This is an old bug, so back-patch
to all supported branches.
Neil Chen, test case by Masahiko Sawada
Discussion: https://postgr.es/m/111621616618184@mail.yandex.ru
Discussion: https://postgr.es/m/CAA3qoJnr2+1dVJObNtfec=qW4Z0nz=A9+r5bZKoTSy5RDjskMw@mail.gmail.com
Along the same lines as 047329624, ed2c7f65b and daa9fe8a5, reduce
code duplication by having just one copy of the parts of the query
that are the same across all server versions; and make the
conditionals control the smallest possible amount of code.
This also gets rid of the confusing assortment of different ways
to accomplish the same result that we had here before.
While at it, make sure all three relevant parts of the function
list the fields in the same order. This is just neatnik-ism,
of course.
Discussion: https://postgr.es/m/1240992.1634419055@sss.pgh.pa.us
If the blob TOC file cannot be parsed, the error message was failing
to print the filename as the variable holding it was shadowed by the
destination buffer for parsing. When the filename fails to parse,
the error will print an empty string:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "": ..
..instead of the intended error message:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "dump/blobs.toc": ..
Fix by renaming both variables as the shared name was too generic to
store either and still convey what the variable held.
Backpatch all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/A2B151F5-B32B-4F2C-BA4A-6870856D9BDE@yesql.se
Backpatch-through: 9.6
Make sure that the string parsing is limited by the size of the
destination buffer.
In pg_basebackup the available values sent from the server
is limited to two characters so there was no risk of overflow.
In pg_dump the buffer is bounded by MAXPGPATH, and thus the limit
must be inserted via preprocessor expansion and the buffer increased
by one to account for the terminator. There is no risk of overflow
here, since in this case, the buffer scanned is smaller than the
destination buffer.
Backpatch the pg_basebackup fix to 11 where it was introduced, and
the pg_dump fix all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/B14D3D7B-F98C-4E20-9459-C122C67647FB@yesql.se
Backpatch-through: 11 and 9.6
The tests added by c0280bc and d9ddc50 in 001_basic.pl have introduced
commands calling directly psql, making them sensitive to the
environment. One issue was that those commands forgot -X to not use a
local .psqlrc, causing all those tests to fail if psql cannot properly
parse this file.
TAP tests should be designed so as they run in an isolated fashion,
without any dependency on the environment where they are run. As
PostgresNode::psql gives already all the facilities those new tests
need, switch to that instead of calling plain psql commands where
interactions with a backend are needed. The test is slightly refactored
to be able to check after the expected patterns of stdout and stderr,
keeping the same amount of coverage as previously.
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzn8ftvcDPwomn+y04JJzbT=TG7TN=QsmSEATUOW-ZuvQQ@mail.gmail.com
It was clearly the intent to do so all along, but the original coding
fat-fingered this by checking the wrong array element. We fixed it
in passing in 403a3d91c, but that later got reverted, and we forgot
to keep this bug fix.
Most of the time this'd be relatively harmless, since once we lock
any of the partitioned table's leaf partitions, that would suffice
to prevent major DDL on the partitioned table itself. However, a
childless partitioned table would get dumped with no relevant lock
whatsoever, possibly allowing dump failure or inconsistent output.
Unlike 403a3d91c, there are no versioning concerns, since every server
version that has partitioned tables will allow you to lock one.
Back-patch to v10 where partitioned tables were introduced.
Discussion: https://postgr.es/m/1018205.1634346327@sss.pgh.pa.us
Avoid calling contrib/amcheck functions with relations that are
unsuitable for checking. Specifically, don't attempt verification of
temporary relations, or indexes whose pg_index entry indicates that the
index is invalid, or not ready.
These relations are not supported by any of the contrib/amcheck
functions, for reasons that are pretty fundamental. For example, the
implementation of REINDEX CONCURRENTLY can add its own "transient"
pg_index entries, which has rather unclear implications for the B-Tree
verification functions, at least in the general case -- so they just
treat it as an error. It falls to the amcheck caller (in this case
pg_amcheck) to deal with the situation at a higher level.
pg_amcheck now simply treats these conditions as additional "visibility
concerns" when it queries system catalogs. This is a little arbitrary.
It seems to have the least problems among any of the available
alternatives.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Bug: #17212
Discussion: https://postgr.es/m/17212-34dd4a1d6bba98bf@postgresql.org
Backpatch: 14-, where pg_amcheck was introduced.
This fixes a set of issues that cause different breakages or annoyances
when using pg_upgrade's test.sh to do upgrades across different major
versions:
- test.sh is completely broken when using v14 as new version because of
the removal of testtablespace/ as Makefile rule. Older versions of
pg_regress don't support --make-tablespacedir, blocking the creation of
the tablespace. In order to fix that, it is simple enough to create
those directories in the script itself, but only do that when an old
version is involved. This fix is needed on HEAD and REL_14_STABLE.
- The script would fail when using PG <= v11 as old version because of
WITH OIDS relations not supported in v12. In order to fix this, this
steals a method from the buildfarm that uses a DO block to change all
the relations marked as WITH OIDS, allowing pg_upgrade to pass. This is
more portable than using ALTER TABLE queries on the relations causing
issues. This is fixed down to v12, and authored originally by Andrew
Dunstan.
- Not using --extra-float-digits=0 with v11 as old version causes
a lot of diffs in the dumps, making the whole unreadable. This gets
only done when using v11 as old version. This is fixed down to v12.
The buildfarm code uses that already.
Note that the addition of --wal-segsize and --allow-group-access breaks
the script when using v10 or older at initdb time as these got added in
11. 10 would be EOL'd next year and nobody has complained about those
problems yet, so nothing is done about that. This means that this
commit fixes upgrade tests using test.sh with v11 as minimum older
version, up to HEAD, and that it is enough to apply this change down to
12. The old and new dumps still generate diffs, still require manual
checks, and more could be done to reduce the noise, but this allows the
tests to run with a rather minimal amount of them.
I have tested this commit and test.sh with v11 as minimum across all the
branches where this is applied. Note that this commit has no impact on
the normal pg_upgrade test run with a simple "make check".
Author: Justin Pryzby, Andrew Dunstan, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
A repeated complaint was that scan-build thought that if the \timing
setting changes during processing of a query, the post-processing
might read garbage time values. This is probably not possible right
now, but it's not entirely inconceivable given the code structure. So
silence this warning with small restructuring that makes this more
robust. The other warnings were a few dead stores that are easy to
remove.
Discussion: https://www.postgresql.org/message-id/2570e2ae-fa0f-aac9-f72f-bb59a9983a20@enterprisedb.com
Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
Like BASE_BACKUP, CREATE_REPLICATION_SLOT has historically used a
hard-coded syntax. To improve future extensibility, adopt a flexible
options syntax here, too.
In the new syntax, instead of three mutually exclusive options
EXPORT_SNAPSHOT, USE_SNAPSHOT, and NOEXPORT_SNAPSHOT, there is now a single
SNAPSHOT option with three possible values: 'export', 'use', and 'nothing'.
This commit does not remove support for the old syntax. It just adds
the new one as an additional option, makes pg_receivewal,
pg_recvlogical, and walreceiver processes use it.
Patch by me, reviewed by Fabien Coelho, Sergei Kornilov, and
Fujii Masao.
Discussion: http://postgr.es/m/CA+TgmobAczXDRO_Gr2euo_TxgzaH1JxbNxvFx=HYvBinefNH8Q@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Previously, BASE_BACKUP used an entirely hard-coded syntax, but that's
hard to extend. Instead, adopt the same kind of syntax we've used for
SQL commands such as VACUUM, ANALYZE, COPY, and EXPLAIN, where it's
not necessary for all of the option names to be parser keywords.
In the new syntax, most of the options now take an optional Boolean
argument. To match our practice in other in places, the options which
the old syntax called NOWAIT and NOVERIFY_CHECKSUMS options are in the
new syntax called WAIT and VERIFY_CHECKUMS, and the default value is
false. In the new syntax, the FAST option has been replaced by a
CHECKSUM option whose value may be 'fast' or 'spread'.
This commit does not remove support for the old syntax. It just adds
the new one as an additional option, and makes pg_basebackup prefer
the new syntax when the server is new enough to support it.
Patch by me, reviewed and tested by Fabien Coelho, Sergei Kornilov,
Fujii Masao, and Tushar Ahuja.
Discussion: http://postgr.es/m/CA+TgmobAczXDRO_Gr2euo_TxgzaH1JxbNxvFx=HYvBinefNH8Q@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Per discussion, let's just follow CLDR's default zone mappings
faithfully. There are two changes here that are clear improvements:
* Mapping "Greenwich Standard Time" to Atlantic/Reykjavik is actually
a better fit than using London, because Iceland hasn't observed DST
since 1968, so this is more nearly what people might expect.
* Since the "Samoa" zone is specified to be UTC+13:00, we must map
it to Pacific/Apia not Pacific/Samoa; the latter refers to American
Samoa which is now on the other side of the date line.
The rest of these changes look like they're choosing the most populous
IANA zone as representative. Whatever the details, we're just going
to say "if you don't like this mapping, complain to CLDR".
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
This corrects a bunch of entries in win32_tzmap[], and adds a few
new ones, based on the CLDR project's windowsZones.xml file.
Non-cosmetic changes fall into four main categories:
* Flat-out errors:
US/Aleutan doesn't exist
America/Salvador doesn't exist
Asia/Baku is wrong for Yerevan
Asia/Dhaka (Bangladesh) is wrong for Astana (Kazakhstan)
Europe/Bucharest is wrong for Chisinau
America/Mexico_City is wrong for Chetumal
America/Buenos_Aires is wrong for Cayenne
America/Caracas has its own zone, so poor fit for La Paz
US/Eastern is wrong for Haiti
US/Eastern is wrong for Indiana (East)
Asia/Karachi is wrong for Tashkent
Etc/UTC+12 doesn't exist
Signs of Etc/GMT zones were backwards
* Judgment calls:
(These changes follow CLDR's choices, except for the first one)
Use Europe/London for "Greenwich Standard Time", since that seems much
more likely than Africa/Casablanca to be what people will think that
zone name means. CLDR has Atlantic/Reykjavik here, but that's no better.
Asia/Shanghai seems a better fit than Hong Kong for "China Standard
Time".
Europe/Sarajevo is now a link to Belgrade, ie "Central Europe Standard
Time"; so use Warsaw for "Central European Standard Time".
America/Sao_Paulo seems more representative than Araguaina for
"E. South America Standard Time".
Africa/Johannesburg seems more representative than Harare for
"South Africa Standard Time".
* New Windows zone names:
"Israel Standard Time"
"Kaliningrad Standard Time"
"Russia Time Zone N" for various N
"Singapore Standard Time"
"South Sudan Standard Time"
"W. Central Africa Standard Time"
"West Bank Standard Time"
"Yukon Standard Time"
Some of these replace older spellings, but I kept the older spellings
too in case our code runs on a machine with the older data.
* Replace aliases (tzdb Links) with underlying city-named zones:
(This tracks tzdb's longstanding practice, and reduces inconsistency
with the rest of the entries, as well as with CLDR.)
US/Alaska
Asia/Kuwait
Asia/Muscat
Canada/Atlantic
Australia/Canberra
Canada/Saskatchewan
US/Central
US/Eastern
US/Hawaii
US/Mountain
Canada/Newfoundland
US/Pacific
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The original intent seems to have been to sort case-insensitively
by the Windows zone name, but various changes over the years did
not get that memo. This commit just moves a few entries to
restore exact alphabetic order, to ease comparison to the outputs
of processing scripts.
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
Previously socket errors such as invalid socket or socket wait method failures
during benchmark caused pgbench to exit with status 0. Instead, errors during
the run should result in exit status 2.
Back-patch to v12 where pgbench started reporting exit status.
Original complaint and patch by Hayato Kuroda.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870057375ACA8A73099C649F5349@TYCPR01MB5870.jpnprd01.prod.outlook.com
The failure of socket wait method like "select()" doesn't terminate pgbench.
So the log level of error message when that failure happens should be ERROR.
But previously FATAL was used in that case.
Back-patch to v13 where pgbench started using common logging API.
Author: Yugo Nagata, Fabien COELHO
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210617005934.8bd37bf72efd5f1b38e6f482@sraoss.co.jp
Sequences were left out of the list of relation kinds that
verify_heapam knew how to check, though it is fairly trivial to allow
them. Doing that, and while at it, updating pg_amcheck to include
sequences in relations matched by table and relation patterns.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/81ad4757-92c1-4aa3-7bee-f609544837e3%40enterprisedb.com
That allows to include just visibilitymapdefs.h from file.c, and in turn,
remove include of postgres.h from relcache.h.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210913232614.czafiubr435l6egi%40alap3.anarazel.de
Author: Alexander Korotkov
Reviewed-by: Andres Freund, Tom Lane, Alvaro Herrera
Backpatch-through: 13
This addresses two issues with the tests added in 0c39c292 for runtime
GUCs:
- Re-enable the test on Msys. The test could fail because of \r\n
generated by Msys perl. 0d91c52a has taken care of this issue.
- Allow the test to run in the context of a privileged account. CIs
running under privileged accounts would fail on permission failures, as
reported by Andres Freund. This issue is fixed by wrapping the postgres
command within pg_ctl as the latter will take care of any permissions
needed. The test checking a failure of postgres -C for a runtime
parameter with an instance running is removed, as pg_ctl produces an
unstable error code (no need for a CI to reproduce that).
Discussion: https://postgr.es/m/20210921032040.lyl4lcax37aedx2x@alap3.anarazel.de