installation on Windows It is recommended that most users download the binary distribution for Windows, available as a one-click installer package from the PostgreSQL website. Building from source is only intended for people developing PostgreSQL or extensions. There are several different ways of building PostgreSQL on Windows. The simplest way to build with Microsoft tools is to install a modern version of the Microsoft Platform SDK and use use the included compiler. It is also possible to build with the full Microsoft Visual C++ 2005 or 2008. In some cases that requires the installation of the Platform SDK in addition to the compiler. It is also possible to build PostgreSQL using the GNU compiler tools provided by MinGW, or using Cygwin for older versions of Windows. Finally, the client access library (libpq) can be built using Visual C++ 7.1 or Borland C++ for compatibility with statically linked applications built using these tools. Building using MinGW or Cygwin uses the normal build system, see and the specific notes in and . These builds cannot generate 64-bit binaries. Cygwin is not recommended and should only be used for older versions of Windows where the native build does not work, such as Windows 98. MinGW is only recommended if you are building other modules using it. The official binaries are built using Visual Studio. PostgreSQL can be built using the Visual C++ compiler suite from Microsoft. These compilers can be either from Visual Studio, Visual Studio Express or recent versions of the Platform SDK. If you do not already have a Visual Studio environment set up, the easiest way us to use the compilers in the Platform SDK, which is a free download from Microsoft. PostgreSQL supports the compilers from Visual Studio 2005 and Visual Studio 2008. When using the Platform SDK only, or when building for 64-bit Windows, only Visual Studio 2008 is supported. The tools for building using Visual C++, are in the src/tools/msvc directory. When building, make sure there are no tools from MinGW or Cygwin present in your system PATH. Also, make sure you have all the required Visual C++ tools available in the PATH. In Visual Studio, start the Visual Studio Command Prompt. In the Platform SDK, start the CMD shell listed under the SDK on the Start Menu. If you wish to build a 64-bit version, you must use the 64-bit version of the command, and vice versa. All commands should be run from the src\tools\msvc directory. Before you build, you may need to edit the file config.pl to reflect any configuration options you want to change, or the paths to any third party libraries to use. The complete configuration is determined by first reading and parsing the file config_default.pl, and then apply any changes from config.pl. For example, to specify the location of your Python installation, put the following in config.pl: $config->{python} = 'c:\python26'; You only need to specify those parameters that are different from what's in config_default.pl. If you need to set any other environment variables, create a file called buildenv.pl and put the required commands there. For example, to add the path for bison when it's not in the PATH, create a file containing: $ENV{PATH}=$ENV{PATH} . ';c:\some\where\bison\bin'; The following additional products are required to build PostgreSQL. Use the config.pl file to specify which directories the libraries are available in. Microsoft Platform SDK It is recommended that you upgrade to the latest available version of the Microsoft Platform SDK, available for download from . You must always include the Windows Headers and Libraries part of the SDK. If you install the Platform SDK including the Visual C++ Compilers, you don't need Visual Studio to build. ActiveState Perl ActiveState Perl is required to run the build generation scripts. MinGW or Cygwin Perl will not work. It must also be present in the PATH. Binaries can be downloaded from (Note: version 5.8 is required, the free Standard Distribution is sufficient). The following additional products are not required to get started, but are required to build the complete package. Use the config.pl file to specify which directories the libraries are available in. ActiveState TCL Required for building PL/TCL (Note: version 8.4 is required, the free Standard Distribution is sufficient). Bison and Flex Bison and Flex are required to build from Git, but not required when building from a release file. Note that only Bison 1.875 or versions 2.2 and later will work. Also, Flex version 2.5.31 or later is required. Bison can be downloaded from . Flex can be downloaded from . Diff Diff is required to run the regression tests, and can be downloaded from . Gettext Gettext is required to build with NLS support, and can be downloaded from . Note that binaries, dependencies and developer files are all needed. MIT Kerberos Required for Kerberos authentication support. MIT Kerberos can be downloaded from . libxml2 and libxslt Required for XML support. Binaries can be downloaded from or source from . Note that libxml2 requires iconv, which is available from the same download location. openssl Required for SSL support. Binaries can be downloaded from or source from . ossp-uuid Required for UUID-OSSP support (contrib only). Source can be downloaded from . Python Required for building PL/Python. Binaries can be downloaded from . zlib Required for compression support in pg_dump and pg_restore. Binaries can be downloaded from . PostgreSQL will only build for the x64 architecture on 64-bit Windows, there is no support for Itanium processors. Mixing 32- and 64-bit versions in the same build tree is not supported. The build system will automatically detect if it's running in a 32- or 64-bit environment, and build PostgreSQL accordingly. For this reason, it is important to start the correct command prompt before building. To use a server-side third party library such as python or openssl, this library must also be 64-bit. There is no support for loading a 32-bit library in a 64-bit server. Several of the third party libraries that PostgreSQL supports may only be available in 32-bit versions, in which case they cannot be used with 64-bit PostgreSQL. To build all of PostgreSQL in release configuration (the default), run the command: build To build all of PostgreSQL in debug configuration, run the command: build DEBUG To build just a single project, for example psql, run the commands: build psql build DEBUG psql To change the default build configuration to debug, put the following in the buildenv.pl file: $ENV{CONFIG}="Debug"; It is also possible to build from inside the Visual Studio GUI. In this case, you need to run: perl mkvcbuild.pl from the command prompt, and then open the generated pgsql.sln (in the root directory of the source tree) in Visual Studio. Most of the time, the automatic dependency tracking in Visual Studio will handle changed files. But if there have been large changes, you may need to clean the installation. To do this, simply run the clean.bat command, which will automatically clean out all generated files. You can also run it with the dist parameter, in which case it will behave like make distclean and remove the flex/bison output files as well. By default, all files are written into a subdirectory of the debug or release directories. To install these files using the standard layout, and also generate the files required to initialize and use the database, run the command: install c:\destination\directory To run the regression tests, make sure you have completed the build of all required parts first. Also, make sure that the DLLs required to load all parts of the system (such as the Perl and Python DLLs for the procedural languages) are present in the system path. If they are not, set it through the buildenv.pl file. To run the tests, run one of the following commands from the src\tools\msvc directory: vcregress check vcregress installcheck vcregress plcheck vcregress contribcheck To change the schedule used (default is parallel), append it to the command line like: vcregress check serial For more information about the regression tests, see . Building the PostgreSQL documentation in HTML format requires several tools and files. Create a root directory for all these files, and store them in the subdirectories in the list below. OpenJade 1.3.1-2 Download from and uncompress in the subdirectory openjade-1.3.1. DocBook DTD 4.2 Download from and uncompress in the subdirectory docbook. DocBook DSSSL 1.79 Download from and uncompress in the subdirectory docbook-dsssl-1.79. ISO character entities Download from and uncompress in the subdirectory docbook. Edit the buildenv.pl file, and add a variable for the location of the root directory, for example: $ENV{DOCROOT}='c:\docbook'; To build the documentation, run the command builddoc.bat. Note that this will actually run the build twice, in order to generate the indexes. The generated HTML files will be in doc\src\sgml. Using Visual C++ 7.1-9.0 or Borland C++ to build libpq is only recommended if you need a version with different debug/release flags, or if you need a static library to link into an application. For normal use the MinGW or Visual Studio or Platform SDK method is recommended. To build the libpq client library using Visual Studio 7.1 or later, change into the src directory and type the command: nmake /f win32.mak To build a 64-bit version of the libpq client library using Visual Studio 8.0 or later, change into the src directory and type in the command: nmake /f win32.mak CPU=AMD64 See the win32.mak file for further details about supported variables. To build the libpq client library using Borland C++, change into the src directory and type the command: make -N -DCFG=Release /f bcc32.mak The following files will be built: interfaces\libpq\Release\libpq.dll The dynamically linkable frontend library interfaces\libpq\Release\libpqdll.lib Import library to link your programs to libpq.dll interfaces\libpq\Release\libpq.lib Static version of the frontend library Normally you do not need to install any of the client files. You should place the libpq.dll file in the same directory as your applications executable file. Do not install libpq.dll into your Windows, System or System32 directory unless absolutely necessary. If this file is installed using a setup program, then it should be installed with version checking using the VERSIONINFO resource included in the file, to ensure that a newer version of the library is not overwritten. If you are planning to do development using libpq on this machine, you will have to add the src\include and src\interfaces\libpq subdirectories of the source tree to the include path in your compiler's settings. To use the library, you must add the libpqdll.lib file to your project. (In Visual C++, just right-click on the project and choose to add it.)