/*------------------------------------------------------------------------- * tablesync.c * PostgreSQL logical replication * * Copyright (c) 2012-2017, PostgreSQL Global Development Group * * IDENTIFICATION * src/backend/replication/logical/tablesync.c * * NOTES * This file contains code for initial table data synchronization for * logical replication. * * The initial data synchronization is done separately for each table, * in a separate apply worker that only fetches the initial snapshot data * from the publisher and then synchronizes the position in the stream with * the main apply worker. * * There are several reasons for doing the synchronization this way: * - It allows us to parallelize the initial data synchronization * which lowers the time needed for it to happen. * - The initial synchronization does not have to hold the xid and LSN * for the time it takes to copy data of all tables, causing less * bloat and lower disk consumption compared to doing the * synchronization in a single process for the whole database. * - It allows us to synchronize any tables added after the initial * synchronization has finished. * * The stream position synchronization works in multiple steps. * - Sync finishes copy and sets worker state as SYNCWAIT and waits for * state to change in a loop. * - Apply periodically checks tables that are synchronizing for SYNCWAIT. * When the desired state appears, it will set the worker state to * CATCHUP and starts loop-waiting until either the table state is set * to SYNCDONE or the sync worker exits. * - After the sync worker has seen the state change to CATCHUP, it will * read the stream and apply changes (acting like an apply worker) until * it catches up to the specified stream position. Then it sets the * state to SYNCDONE. There might be zero changes applied between * CATCHUP and SYNCDONE, because the sync worker might be ahead of the * apply worker. * - Once the state was set to SYNCDONE, the apply will continue tracking * the table until it reaches the SYNCDONE stream position, at which * point it sets state to READY and stops tracking. Again, there might * be zero changes in between. * * So the state progression is always: INIT -> DATASYNC -> SYNCWAIT -> CATCHUP -> * SYNCDONE -> READY. * * The catalog pg_subscription_rel is used to keep information about * subscribed tables and their state. Some transient state during data * synchronization is kept in shared memory. The states SYNCWAIT and * CATCHUP only appear in memory. * * Example flows look like this: * - Apply is in front: * sync:8 * -> set in memory SYNCWAIT * apply:10 * -> set in memory CATCHUP * -> enter wait-loop * sync:10 * -> set in catalog SYNCDONE * -> exit * apply:10 * -> exit wait-loop * -> continue rep * apply:11 * -> set in catalog READY * - Sync in front: * sync:10 * -> set in memory SYNCWAIT * apply:8 * -> set in memory CATCHUP * -> continue per-table filtering * sync:10 * -> set in catalog SYNCDONE * -> exit * apply:10 * -> set in catalog READY * -> stop per-table filtering * -> continue rep *------------------------------------------------------------------------- */ #include "postgres.h" #include "miscadmin.h" #include "pgstat.h" #include "access/xact.h" #include "catalog/pg_subscription_rel.h" #include "catalog/pg_type.h" #include "commands/copy.h" #include "parser/parse_relation.h" #include "replication/logicallauncher.h" #include "replication/logicalrelation.h" #include "replication/walreceiver.h" #include "replication/worker_internal.h" #include "utils/snapmgr.h" #include "storage/ipc.h" #include "utils/builtins.h" #include "utils/lsyscache.h" #include "utils/memutils.h" static bool table_states_valid = false; StringInfo copybuf = NULL; /* * Exit routine for synchronization worker. */ static void pg_attribute_noreturn() finish_sync_worker(void) { /* * Commit any outstanding transaction. This is the usual case, unless * there was nothing to do for the table. */ if (IsTransactionState()) { CommitTransactionCommand(); pgstat_report_stat(false); } /* And flush all writes. */ XLogFlush(GetXLogWriteRecPtr()); StartTransactionCommand(); ereport(LOG, (errmsg("logical replication table synchronization worker for subscription \"%s\", table \"%s\" has finished", MySubscription->name, get_rel_name(MyLogicalRepWorker->relid)))); CommitTransactionCommand(); /* Find the main apply worker and signal it. */ logicalrep_worker_wakeup(MyLogicalRepWorker->subid, InvalidOid); /* Stop gracefully */ proc_exit(0); } /* * Wait until the relation synchronization state is set in the catalog to the * expected one. * * Used when transitioning from CATCHUP state to SYNCDONE. * * Returns false if the synchronization worker has disappeared or the table state * has been reset. */ static bool wait_for_relation_state_change(Oid relid, char expected_state) { int rc; char state; for (;;) { LogicalRepWorker *worker; XLogRecPtr statelsn; CHECK_FOR_INTERRUPTS(); /* XXX use cache invalidation here to improve performance? */ PushActiveSnapshot(GetLatestSnapshot()); state = GetSubscriptionRelState(MyLogicalRepWorker->subid, relid, &statelsn, true); PopActiveSnapshot(); if (state == SUBREL_STATE_UNKNOWN) return false; if (state == expected_state) return true; /* Check if the sync worker is still running and bail if not. */ LWLockAcquire(LogicalRepWorkerLock, LW_SHARED); /* Check if the opposite worker is still running and bail if not. */ worker = logicalrep_worker_find(MyLogicalRepWorker->subid, am_tablesync_worker() ? InvalidOid : relid, false); LWLockRelease(LogicalRepWorkerLock); if (!worker) return false; rc = WaitLatch(MyLatch, WL_LATCH_SET | WL_TIMEOUT | WL_POSTMASTER_DEATH, 1000L, WAIT_EVENT_LOGICAL_SYNC_STATE_CHANGE); /* emergency bailout if postmaster has died */ if (rc & WL_POSTMASTER_DEATH) proc_exit(1); ResetLatch(MyLatch); } return false; } /* * Wait until the apply worker changes the state of our synchronization * worker to the expected one. * * Used when transitioning from SYNCWAIT state to CATCHUP. * * Returns false if the apply worker has disappeared or the table state has been * reset. */ static bool wait_for_worker_state_change(char expected_state) { int rc; for (;;) { LogicalRepWorker *worker; CHECK_FOR_INTERRUPTS(); /* Bail if the apply has died. */ LWLockAcquire(LogicalRepWorkerLock, LW_SHARED); worker = logicalrep_worker_find(MyLogicalRepWorker->subid, InvalidOid, false); LWLockRelease(LogicalRepWorkerLock); if (!worker) return false; if (MyLogicalRepWorker->relstate == expected_state) return true; rc = WaitLatch(MyLatch, WL_LATCH_SET | WL_TIMEOUT | WL_POSTMASTER_DEATH, 1000L, WAIT_EVENT_LOGICAL_SYNC_STATE_CHANGE); /* emergency bailout if postmaster has died */ if (rc & WL_POSTMASTER_DEATH) proc_exit(1); ResetLatch(MyLatch); } return false; } /* * Callback from syscache invalidation. */ void invalidate_syncing_table_states(Datum arg, int cacheid, uint32 hashvalue) { table_states_valid = false; } /* * Handle table synchronization cooperation from the synchronization * worker. * * If the sync worker is in CATCHUP state and reached (or passed) the * predetermined synchronization point in the WAL stream, mark the table as * SYNCDONE and finish. */ static void process_syncing_tables_for_sync(XLogRecPtr current_lsn) { Assert(IsTransactionState()); SpinLockAcquire(&MyLogicalRepWorker->relmutex); if (MyLogicalRepWorker->relstate == SUBREL_STATE_CATCHUP && current_lsn >= MyLogicalRepWorker->relstate_lsn) { TimeLineID tli; MyLogicalRepWorker->relstate = SUBREL_STATE_SYNCDONE; MyLogicalRepWorker->relstate_lsn = current_lsn; SpinLockRelease(&MyLogicalRepWorker->relmutex); SetSubscriptionRelState(MyLogicalRepWorker->subid, MyLogicalRepWorker->relid, MyLogicalRepWorker->relstate, MyLogicalRepWorker->relstate_lsn, true); walrcv_endstreaming(wrconn, &tli); finish_sync_worker(); } else SpinLockRelease(&MyLogicalRepWorker->relmutex); } /* * Handle table synchronization cooperation from the apply worker. * * Walk over all subscription tables that are individually tracked by the * apply process (currently, all that have state other than * SUBREL_STATE_READY) and manage synchronization for them. * * If there are tables that need synchronizing and are not being synchronized * yet, start sync workers for them (if there are free slots for sync * workers). To prevent starting the sync worker for the same relation at a * high frequency after a failure, we store its last start time with each sync * state info. We start the sync worker for the same relation after waiting * at least wal_retrieve_retry_interval. * * For tables that are being synchronized already, check if sync workers * either need action from the apply worker or have finished. This is the * SYNCWAIT to CATCHUP transition. * * If the synchronization position is reached (SYNCDONE), then the table can * be marked as READY and is no longer tracked. */ static void process_syncing_tables_for_apply(XLogRecPtr current_lsn) { struct tablesync_start_time_mapping { Oid relid; TimestampTz last_start_time; }; static List *table_states = NIL; static HTAB *last_start_times = NULL; ListCell *lc; bool started_tx = false; Assert(!IsTransactionState()); /* We need up-to-date sync state info for subscription tables here. */ if (!table_states_valid) { MemoryContext oldctx; List *rstates; ListCell *lc; SubscriptionRelState *rstate; /* Clean the old list. */ list_free_deep(table_states); table_states = NIL; StartTransactionCommand(); started_tx = true; /* Fetch all non-ready tables. */ rstates = GetSubscriptionNotReadyRelations(MySubscription->oid); /* Allocate the tracking info in a permanent memory context. */ oldctx = MemoryContextSwitchTo(CacheMemoryContext); foreach(lc, rstates) { rstate = palloc(sizeof(SubscriptionRelState)); memcpy(rstate, lfirst(lc), sizeof(SubscriptionRelState)); table_states = lappend(table_states, rstate); } MemoryContextSwitchTo(oldctx); table_states_valid = true; } /* * Prepare a hash table for tracking last start times of workers, to avoid * immediate restarts. We don't need it if there are no tables that need * syncing. */ if (table_states && !last_start_times) { HASHCTL ctl; memset(&ctl, 0, sizeof(ctl)); ctl.keysize = sizeof(Oid); ctl.entrysize = sizeof(struct tablesync_start_time_mapping); last_start_times = hash_create("Logical replication table sync worker start times", 256, &ctl, HASH_ELEM | HASH_BLOBS); } /* * Clean up the hash table when we're done with all tables (just to * release the bit of memory). */ else if (!table_states && last_start_times) { hash_destroy(last_start_times); last_start_times = NULL; } /* * Process all tables that are being synchronized. */ foreach(lc, table_states) { SubscriptionRelState *rstate = (SubscriptionRelState *) lfirst(lc); if (rstate->state == SUBREL_STATE_SYNCDONE) { /* * Apply has caught up to the position where the table sync has * finished. Mark the table as ready so that the apply will just * continue to replicate it normally. */ if (current_lsn >= rstate->lsn) { rstate->state = SUBREL_STATE_READY; rstate->lsn = current_lsn; if (!started_tx) { StartTransactionCommand(); started_tx = true; } SetSubscriptionRelState(MyLogicalRepWorker->subid, rstate->relid, rstate->state, rstate->lsn, true); } } else { LogicalRepWorker *syncworker; int nsyncworkers = 0; LWLockAcquire(LogicalRepWorkerLock, LW_SHARED); syncworker = logicalrep_worker_find(MyLogicalRepWorker->subid, rstate->relid, false); if (syncworker) { SpinLockAcquire(&syncworker->relmutex); rstate->state = syncworker->relstate; rstate->lsn = syncworker->relstate_lsn; SpinLockRelease(&syncworker->relmutex); } else /* * If there is no sync worker for this table yet, count * running sync workers for this subscription, while we have * the lock, for later. */ nsyncworkers = logicalrep_sync_worker_count(MyLogicalRepWorker->subid); LWLockRelease(LogicalRepWorkerLock); /* * There is a worker synchronizing the relation and waiting for * apply to do something. */ if (syncworker && rstate->state == SUBREL_STATE_SYNCWAIT) { /* * Tell sync worker it can catchup now. We'll wait for it so * it does not get lost. */ SpinLockAcquire(&syncworker->relmutex); syncworker->relstate = SUBREL_STATE_CATCHUP; syncworker->relstate_lsn = Max(syncworker->relstate_lsn, current_lsn); SpinLockRelease(&syncworker->relmutex); /* Signal the sync worker, as it may be waiting for us. */ logicalrep_worker_wakeup_ptr(syncworker); /* * Enter busy loop and wait for synchronization worker to * reach expected state (or die trying). */ if (!started_tx) { StartTransactionCommand(); started_tx = true; } wait_for_relation_state_change(rstate->relid, SUBREL_STATE_SYNCDONE); } /* * If there is no sync worker registered for the table and there * is some free sync worker slot, start a new sync worker for the * table. */ else if (!syncworker && nsyncworkers < max_sync_workers_per_subscription) { TimestampTz now = GetCurrentTimestamp(); struct tablesync_start_time_mapping *hentry; bool found; hentry = hash_search(last_start_times, &rstate->relid, HASH_ENTER, &found); if (!found || TimestampDifferenceExceeds(hentry->last_start_time, now, wal_retrieve_retry_interval)) { logicalrep_worker_launch(MyLogicalRepWorker->dbid, MySubscription->oid, MySubscription->name, MyLogicalRepWorker->userid, rstate->relid); hentry->last_start_time = now; } } } } if (started_tx) { CommitTransactionCommand(); pgstat_report_stat(false); } } /* * Process state possible change(s) of tables that are being synchronized. */ void process_syncing_tables(XLogRecPtr current_lsn) { if (am_tablesync_worker()) process_syncing_tables_for_sync(current_lsn); else process_syncing_tables_for_apply(current_lsn); } /* * Create list of columns for COPY based on logical relation mapping. */ static List * make_copy_attnamelist(LogicalRepRelMapEntry *rel) { List *attnamelist = NIL; int i; for (i = 0; i < rel->remoterel.natts; i++) { attnamelist = lappend(attnamelist, makeString(rel->remoterel.attnames[i])); } return attnamelist; } /* * Data source callback for the COPY FROM, which reads from the remote * connection and passes the data back to our local COPY. */ static int copy_read_data(void *outbuf, int minread, int maxread) { int bytesread = 0; int avail; /* If there are some leftover data from previous read, use it. */ avail = copybuf->len - copybuf->cursor; if (avail) { if (avail > maxread) avail = maxread; memcpy(outbuf, ©buf->data[copybuf->cursor], avail); copybuf->cursor += avail; maxread -= avail; bytesread += avail; } while (maxread > 0 && bytesread < minread) { pgsocket fd = PGINVALID_SOCKET; int rc; int len; char *buf = NULL; for (;;) { /* Try read the data. */ len = walrcv_receive(wrconn, &buf, &fd); CHECK_FOR_INTERRUPTS(); if (len == 0) break; else if (len < 0) return bytesread; else { /* Process the data */ copybuf->data = buf; copybuf->len = len; copybuf->cursor = 0; avail = copybuf->len - copybuf->cursor; if (avail > maxread) avail = maxread; memcpy(outbuf, ©buf->data[copybuf->cursor], avail); outbuf = (void *) ((char *) outbuf + avail); copybuf->cursor += avail; maxread -= avail; bytesread += avail; } if (maxread <= 0 || bytesread >= minread) return bytesread; } /* * Wait for more data or latch. */ rc = WaitLatchOrSocket(MyLatch, WL_SOCKET_READABLE | WL_LATCH_SET | WL_TIMEOUT | WL_POSTMASTER_DEATH, fd, 1000L, WAIT_EVENT_LOGICAL_SYNC_DATA); /* Emergency bailout if postmaster has died */ if (rc & WL_POSTMASTER_DEATH) proc_exit(1); ResetLatch(MyLatch); } return bytesread; } /* * Get information about remote relation in similar fashion the RELATION * message provides during replication. */ static void fetch_remote_table_info(char *nspname, char *relname, LogicalRepRelation *lrel) { WalRcvExecResult *res; StringInfoData cmd; TupleTableSlot *slot; Oid tableRow[2] = {OIDOID, CHAROID}; Oid attrRow[4] = {TEXTOID, OIDOID, INT4OID, BOOLOID}; bool isnull; int natt; lrel->nspname = nspname; lrel->relname = relname; /* First fetch Oid and replica identity. */ initStringInfo(&cmd); appendStringInfo(&cmd, "SELECT c.oid, c.relreplident" " FROM pg_catalog.pg_class c" " INNER JOIN pg_catalog.pg_namespace n" " ON (c.relnamespace = n.oid)" " WHERE n.nspname = %s" " AND c.relname = %s" " AND c.relkind = 'r'", quote_literal_cstr(nspname), quote_literal_cstr(relname)); res = walrcv_exec(wrconn, cmd.data, 2, tableRow); if (res->status != WALRCV_OK_TUPLES) ereport(ERROR, (errmsg("could not fetch table info for table \"%s.%s\" from publisher: %s", nspname, relname, res->err))); slot = MakeSingleTupleTableSlot(res->tupledesc); if (!tuplestore_gettupleslot(res->tuplestore, true, false, slot)) ereport(ERROR, (errmsg("table \"%s.%s\" not found on publisher", nspname, relname))); lrel->remoteid = DatumGetObjectId(slot_getattr(slot, 1, &isnull)); Assert(!isnull); lrel->replident = DatumGetChar(slot_getattr(slot, 2, &isnull)); Assert(!isnull); ExecDropSingleTupleTableSlot(slot); walrcv_clear_result(res); /* Now fetch columns. */ resetStringInfo(&cmd); appendStringInfo(&cmd, "SELECT a.attname," " a.atttypid," " a.atttypmod," " a.attnum = ANY(i.indkey)" " FROM pg_catalog.pg_attribute a" " LEFT JOIN pg_catalog.pg_index i" " ON (i.indexrelid = pg_get_replica_identity_index(%u))" " WHERE a.attnum > 0::pg_catalog.int2" " AND NOT a.attisdropped" " AND a.attrelid = %u" " ORDER BY a.attnum", lrel->remoteid, lrel->remoteid); res = walrcv_exec(wrconn, cmd.data, 4, attrRow); if (res->status != WALRCV_OK_TUPLES) ereport(ERROR, (errmsg("could not fetch table info for table \"%s.%s\": %s", nspname, relname, res->err))); /* We don't know the number of rows coming, so allocate enough space. */ lrel->attnames = palloc0(MaxTupleAttributeNumber * sizeof(char *)); lrel->atttyps = palloc0(MaxTupleAttributeNumber * sizeof(Oid)); lrel->attkeys = NULL; natt = 0; slot = MakeSingleTupleTableSlot(res->tupledesc); while (tuplestore_gettupleslot(res->tuplestore, true, false, slot)) { lrel->attnames[natt] = TextDatumGetCString(slot_getattr(slot, 1, &isnull)); Assert(!isnull); lrel->atttyps[natt] = DatumGetObjectId(slot_getattr(slot, 2, &isnull)); Assert(!isnull); if (DatumGetBool(slot_getattr(slot, 4, &isnull))) lrel->attkeys = bms_add_member(lrel->attkeys, natt); /* Should never happen. */ if (++natt >= MaxTupleAttributeNumber) elog(ERROR, "too many columns in remote table \"%s.%s\"", nspname, relname); ExecClearTuple(slot); } ExecDropSingleTupleTableSlot(slot); lrel->natts = natt; walrcv_clear_result(res); pfree(cmd.data); } /* * Copy existing data of a table from publisher. * * Caller is responsible for locking the local relation. */ static void copy_table(Relation rel) { LogicalRepRelMapEntry *relmapentry; LogicalRepRelation lrel; WalRcvExecResult *res; StringInfoData cmd; CopyState cstate; List *attnamelist; ParseState *pstate; /* Get the publisher relation info. */ fetch_remote_table_info(get_namespace_name(RelationGetNamespace(rel)), RelationGetRelationName(rel), &lrel); /* Put the relation into relmap. */ logicalrep_relmap_update(&lrel); /* Map the publisher relation to local one. */ relmapentry = logicalrep_rel_open(lrel.remoteid, NoLock); Assert(rel == relmapentry->localrel); /* Start copy on the publisher. */ initStringInfo(&cmd); appendStringInfo(&cmd, "COPY %s TO STDOUT", quote_qualified_identifier(lrel.nspname, lrel.relname)); res = walrcv_exec(wrconn, cmd.data, 0, NULL); pfree(cmd.data); if (res->status != WALRCV_OK_COPY_OUT) ereport(ERROR, (errmsg("could not start initial contents copy for table \"%s.%s\": %s", lrel.nspname, lrel.relname, res->err))); walrcv_clear_result(res); copybuf = makeStringInfo(); pstate = make_parsestate(NULL); addRangeTableEntryForRelation(pstate, rel, NULL, false, false); attnamelist = make_copy_attnamelist(relmapentry); cstate = BeginCopyFrom(pstate, rel, NULL, false, copy_read_data, attnamelist, NIL); /* Do the copy */ (void) CopyFrom(cstate); logicalrep_rel_close(relmapentry, NoLock); } /* * Start syncing the table in the sync worker. * * The returned slot name is palloc'ed in current memory context. */ char * LogicalRepSyncTableStart(XLogRecPtr *origin_startpos) { char *slotname; char *err; char relstate; XLogRecPtr relstate_lsn; /* Check the state of the table synchronization. */ StartTransactionCommand(); relstate = GetSubscriptionRelState(MyLogicalRepWorker->subid, MyLogicalRepWorker->relid, &relstate_lsn, true); CommitTransactionCommand(); SpinLockAcquire(&MyLogicalRepWorker->relmutex); MyLogicalRepWorker->relstate = relstate; MyLogicalRepWorker->relstate_lsn = relstate_lsn; SpinLockRelease(&MyLogicalRepWorker->relmutex); /* * To build a slot name for the sync work, we are limited to NAMEDATALEN - * 1 characters. We cut the original slot name to NAMEDATALEN - 28 chars * and append _%u_sync_%u (1 + 10 + 6 + 10 + '\0'). (It's actually the * NAMEDATALEN on the remote that matters, but this scheme will also work * reasonably if that is different.) */ StaticAssertStmt(NAMEDATALEN >= 32, "NAMEDATALEN too small"); /* for sanity */ slotname = psprintf("%.*s_%u_sync_%u", NAMEDATALEN - 28, MySubscription->slotname, MySubscription->oid, MyLogicalRepWorker->relid); /* * Here we use the slot name instead of the subscription name as the * application_name, so that it is different from the main apply worker, * so that synchronous replication can distinguish them. */ wrconn = walrcv_connect(MySubscription->conninfo, true, slotname, &err); if (wrconn == NULL) ereport(ERROR, (errmsg("could not connect to the publisher: %s", err))); switch (MyLogicalRepWorker->relstate) { case SUBREL_STATE_INIT: case SUBREL_STATE_DATASYNC: { Relation rel; WalRcvExecResult *res; SpinLockAcquire(&MyLogicalRepWorker->relmutex); MyLogicalRepWorker->relstate = SUBREL_STATE_DATASYNC; MyLogicalRepWorker->relstate_lsn = InvalidXLogRecPtr; SpinLockRelease(&MyLogicalRepWorker->relmutex); /* Update the state and make it visible to others. */ StartTransactionCommand(); SetSubscriptionRelState(MyLogicalRepWorker->subid, MyLogicalRepWorker->relid, MyLogicalRepWorker->relstate, MyLogicalRepWorker->relstate_lsn, true); CommitTransactionCommand(); pgstat_report_stat(false); /* * We want to do the table data sync in a single transaction. */ StartTransactionCommand(); /* * Use a standard write lock here. It might be better to * disallow access to the table while it's being synchronized. * But we don't want to block the main apply process from * working and it has to open the relation in RowExclusiveLock * when remapping remote relation id to local one. */ rel = heap_open(MyLogicalRepWorker->relid, RowExclusiveLock); /* * Create a temporary slot for the sync process. We do this * inside the transaction so that we can use the snapshot made * by the slot to get existing data. */ res = walrcv_exec(wrconn, "BEGIN READ ONLY ISOLATION LEVEL " "REPEATABLE READ", 0, NULL); if (res->status != WALRCV_OK_COMMAND) ereport(ERROR, (errmsg("table copy could not start transaction on publisher"), errdetail("The error was: %s", res->err))); walrcv_clear_result(res); /* * Create new temporary logical decoding slot. * * We'll use slot for data copy so make sure the snapshot is * used for the transaction; that way the COPY will get data * that is consistent with the lsn used by the slot to start * decoding. */ walrcv_create_slot(wrconn, slotname, true, CRS_USE_SNAPSHOT, origin_startpos); copy_table(rel); res = walrcv_exec(wrconn, "COMMIT", 0, NULL); if (res->status != WALRCV_OK_COMMAND) ereport(ERROR, (errmsg("table copy could not finish transaction on publisher"), errdetail("The error was: %s", res->err))); walrcv_clear_result(res); heap_close(rel, NoLock); /* Make the copy visible. */ CommandCounterIncrement(); /* * We are done with the initial data synchronization, update * the state. */ SpinLockAcquire(&MyLogicalRepWorker->relmutex); MyLogicalRepWorker->relstate = SUBREL_STATE_SYNCWAIT; MyLogicalRepWorker->relstate_lsn = *origin_startpos; SpinLockRelease(&MyLogicalRepWorker->relmutex); /* Wait for main apply worker to tell us to catchup. */ wait_for_worker_state_change(SUBREL_STATE_CATCHUP); /*---------- * There are now two possible states here: * a) Sync is behind the apply. If that's the case we need to * catch up with it by consuming the logical replication * stream up to the relstate_lsn. For that, we exit this * function and continue in ApplyWorkerMain(). * b) Sync is caught up with the apply. So it can just set * the state to SYNCDONE and finish. *---------- */ if (*origin_startpos >= MyLogicalRepWorker->relstate_lsn) { /* * Update the new state in catalog. No need to bother * with the shmem state as we are exiting for good. */ SetSubscriptionRelState(MyLogicalRepWorker->subid, MyLogicalRepWorker->relid, SUBREL_STATE_SYNCDONE, *origin_startpos, true); finish_sync_worker(); } break; } case SUBREL_STATE_SYNCDONE: case SUBREL_STATE_READY: case SUBREL_STATE_UNKNOWN: /* * Nothing to do here but finish. (UNKNOWN means the relation was * removed from pg_subscription_rel before the sync worker could * start.) */ finish_sync_worker(); break; default: elog(ERROR, "unknown relation state \"%c\"", MyLogicalRepWorker->relstate); } return slotname; }