postgresql/meson.build
Andres Freund 089c0bc7a7 meson: libpq: Revise static / shared library setup
Improvements:
- we don't need -DFRONTEND for libpq anymore since 1d77afefbd
- the .pc file contents for a static libpq were wrong (referencing
  {pgport, common}_shlib)
- incidentally fixes meson not supporting link_whole on AIX yet
- added explanatory comments

Previously I tried to avoid building libpq's sources twice, once for the
static and once for the shared library. We could still do so, but it's not
clear that it's worth the complication.

Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
2022-10-05 09:56:05 -07:00

3075 lines
89 KiB
Meson

# Entry point for building PostgreSQL with meson
#
# Good starting points for writing meson.build files are:
# - https://mesonbuild.com/Syntax.html
# - https://mesonbuild.com/Reference-manual.html
project('postgresql',
['c'],
version: '16devel',
license: 'PostgreSQL',
# We want < 0.56 for python 3.5 compatibility on old platforms. EPEL for
# RHEL 7 has 0.55. < 0.54 would require replacing some uses of the fs
# module, < 0.53 all uses of fs. So far there's no need to go to >=0.56.
meson_version: '>=0.54',
default_options: [
'warning_level=1', #-Wall equivalent
'buildtype=release',
# For compatibility with the autoconf build, set a default prefix. This
# works even on windows, where it's a drive-relative path (i.e. when on
# d:/sompath it'll install to d:/usr/local/pgsql)
'prefix=/usr/local/pgsql',
]
)
###############################################################
# Basic prep
###############################################################
fs = import('fs')
pkgconfig = import('pkgconfig')
host_system = host_machine.system()
build_system = build_machine.system()
host_cpu = host_machine.cpu_family()
cc = meson.get_compiler('c')
not_found_dep = dependency('', required: false)
thread_dep = dependency('threads')
###############################################################
# Safety first
###############################################################
# It's very easy to get into confusing states when the source directory
# contains an in-place build. E.g. the wrong pg_config.h will be used. So just
# refuse to build in that case.
#
# There's a more elaborate check later, that checks for conflicts around all
# generated files. But we can only do that much further down the line, so this
# quick check seems worth it. Adhering to this advice should clean up the
# conflict, but won't protect against somebody doing make distclean or just
# removing pg_config.h
errmsg_nonclean_base = '''
****
Non-clean source code directory detected.
To build with meson the source tree may not have an in-place, ./configure
style, build configured. You can have both meson and ./configure style builds
for the same source tree by building out-of-source / VPATH with
configure. Alternatively use a separate check out for meson based builds.
@0@
****'''
if fs.exists(meson.current_source_dir() / 'src' / 'include' / 'pg_config.h')
errmsg_cleanup = 'To clean up, run make maintainer-clean in the source tree.'
error(errmsg_nonclean_base.format(errmsg_cleanup))
endif
###############################################################
# Variables to be determined
###############################################################
postgres_inc_d = ['src/include']
postgres_inc_d += get_option('extra_include_dirs')
postgres_lib_d = get_option('extra_lib_dirs')
cppflags = []
cflags = []
cxxflags = []
cflags_warn = []
cxxflags_warn = []
cflags_mod = []
cxxflags_mod = []
ldflags = []
ldflags_be = []
ldflags_sl = []
ldflags_mod = []
test_c_args = []
os_deps = []
backend_both_deps = []
backend_deps = []
libpq_deps = []
pg_sysroot = ''
# source of data for pg_config.h etc
cdata = configuration_data()
###############################################################
# Version and other metadata
###############################################################
pg_version = meson.project_version()
if pg_version.endswith('devel')
pg_version_arr = [pg_version.split('devel')[0], '0']
elif pg_version.contains('beta')
pg_version_arr = [pg_version.split('beta')[0], '0']
elif pg_version.contains('rc')
pg_version_arr = [pg_version.split('rc')[0], '0']
else
pg_version_arr = pg_version.split('.')
endif
pg_version_major = pg_version_arr[0].to_int()
pg_version_minor = pg_version_arr[1].to_int()
pg_version_num = (pg_version_major * 10000) + pg_version_minor
pg_url = 'https://www.postgresql.org/'
cdata.set_quoted('PACKAGE_NAME', 'PostgreSQL')
cdata.set_quoted('PACKAGE_BUGREPORT', 'pgsql-bugs@lists.postgresql.org')
cdata.set_quoted('PACKAGE_URL', pg_url)
cdata.set_quoted('PACKAGE_VERSION', pg_version)
cdata.set_quoted('PACKAGE_STRING', 'PostgreSQL @0@'.format(pg_version))
cdata.set_quoted('PACKAGE_TARNAME', 'postgresql')
pg_version += get_option('extra_version')
cdata.set_quoted('PG_VERSION', pg_version)
cdata.set_quoted('PG_VERSION_STR', 'PostgreSQL @0@ on @1@, compiled by @2@-@3@'.format(
pg_version, build_machine.cpu_family(), cc.get_id(), cc.version()))
cdata.set_quoted('PG_MAJORVERSION', pg_version_major.to_string())
cdata.set('PG_MAJORVERSION_NUM', pg_version_major)
cdata.set('PG_MINORVERSION_NUM', pg_version_minor)
cdata.set('PG_VERSION_NUM', pg_version_num)
cdata.set_quoted('CONFIGURE_ARGS', '')
###############################################################
# Basic platform specific configuration
###############################################################
# meson's system names don't quite map to our "traditional" names. In some
# places we need the "traditional" name, e.g., for mapping
# src/include/port/$os.h to src/include/pg_config_os.h. Define portname for
# that purpose.
portname = host_system
exesuffix = '' # overridden below where necessary
dlsuffix = '.so' # overridden below where necessary
library_path_var = 'LD_LIBRARY_PATH'
# Format of file to control exports from libraries, and how to pass them to
# the compiler. For export_fmt @0@ is the path to the file export file.
export_file_format = 'gnu'
export_file_suffix = 'list'
export_fmt = '-Wl,--version-script=@0@'
# Flags to add when linking a postgres extension, @0@ is path to
# the relevant object on the platform.
mod_link_args_fmt = []
memset_loop_limit = 1024
# Choice of shared memory and semaphore implementation
shmem_kind = 'sysv'
sema_kind = 'sysv'
# We implement support for some operating systems by pretending they're
# another. Map here, before determining system properties below
if host_system == 'dragonfly'
# apparently the most similar
host_system = 'netbsd'
endif
if host_system == 'aix'
library_path_var = 'LIBPATH'
export_file_format = 'aix'
export_fmt = '-Wl,-bE:@0@'
mod_link_args_fmt = ['-Wl,-bI:@0@']
mod_link_with_dir = 'libdir'
mod_link_with_name = '@0@.imp'
# M:SRE sets a flag indicating that an object is a shared library. Seems to
# work in some circumstances without, but required in others.
ldflags_sl += '-Wl,-bM:SRE'
ldflags_be += '-Wl,-brtllib'
# Native memset() is faster, tested on:
# - AIX 5.1 and 5.2, XLC 6.0 (IBM's cc)
# - AIX 5.3 ML3, gcc 4.0.1
memset_loop_limit = 0
elif host_system == 'cygwin'
cppflags += '-D_GNU_SOURCE'
elif host_system == 'darwin'
dlsuffix = '.dylib'
library_path_var = 'DYLD_LIBRARY_PATH'
export_file_format = 'darwin'
export_fmt = '-exported_symbols_list=@0@'
mod_link_args_fmt = ['-bundle_loader', '@0@']
mod_link_with_dir = 'bindir'
mod_link_with_name = '@0@'
sysroot_args = [files('src/tools/darwin_sysroot'), get_option('darwin_sysroot')]
pg_sysroot = run_command(sysroot_args, check:true).stdout().strip()
message('darwin sysroot: @0@'.format(pg_sysroot))
cflags += ['-isysroot', pg_sysroot]
ldflags += ['-isysroot', pg_sysroot]
elif host_system == 'freebsd'
sema_kind = 'unnamed_posix'
elif host_system == 'linux'
sema_kind = 'unnamed_posix'
cppflags += '-D_GNU_SOURCE'
elif host_system == 'netbsd'
# We must resolve all dynamic linking in the core server at program start.
# Otherwise the postmaster can self-deadlock due to signals interrupting
# resolution of calls, since NetBSD's linker takes a lock while doing that
# and some postmaster signal handlers do things that will also acquire that
# lock. As long as we need "-z now", might as well specify "-z relro" too.
# While there's not a hard reason to adopt these settings for our other
# executables, there's also little reason not to, so just add them to
# LDFLAGS.
ldflags += ['-Wl,-z,now', '-Wl,-z,relro']
elif host_system == 'openbsd'
# you're ok
elif host_system == 'sunos'
portname = 'solaris'
export_fmt = '-Wl,-M@0@'
cppflags += '-D_POSIX_PTHREAD_SEMANTICS'
elif host_system == 'windows'
portname = 'win32'
exesuffix = '.exe'
dlsuffix = '.dll'
library_path_var = ''
export_file_format = 'win'
export_file_suffix = 'def'
if cc.get_id() == 'msvc'
export_fmt = '/DEF:@0@'
mod_link_with_name = '@0@.exe.lib'
else
export_fmt = '@0@'
mod_link_with_name = 'lib@0@.exe.a'
endif
mod_link_args_fmt = ['@0@']
mod_link_with_dir = 'libdir'
shmem_kind = 'win32'
sema_kind = 'win32'
cdata.set('WIN32_STACK_RLIMIT', 4194304)
if cc.get_id() == 'msvc'
ldflags += '/INCREMENTAL:NO'
ldflags += '/STACK:@0@'.format(cdata.get('WIN32_STACK_RLIMIT'))
# ldflags += '/nxcompat' # generated by msbuild, should have it for ninja?
else
ldflags += '-Wl,--stack,@0@'.format(cdata.get('WIN32_STACK_RLIMIT'))
# Need to allow multiple definitions, we e.g. want to override getopt.
ldflags += '-Wl,--allow-multiple-definition'
# Ensure we get MSVC-like linking behavior.
ldflags += '-Wl,--disable-auto-import'
endif
os_deps += cc.find_library('ws2_32', required: true)
secur32_dep = cc.find_library('secur32', required: true)
backend_deps += secur32_dep
libpq_deps += secur32_dep
postgres_inc_d += 'src/include/port/win32'
if cc.get_id() == 'msvc'
postgres_inc_d += 'src/include/port/win32_msvc'
endif
windows = import('windows')
else
# XXX: Should we add an option to override the host_system as an escape
# hatch?
error('unknown host system: @0@'.format(host_system))
endif
###############################################################
# Program paths
###############################################################
# External programs
perl = find_program(get_option('PERL'), required: true, native: true)
python = find_program(get_option('PYTHON'), required: true, native: true)
flex = find_program(get_option('FLEX'), native: true, version: '>= 2.5.31')
bison = find_program(get_option('BISON'), native: true, version: '>= 1.875')
sed = find_program(get_option('SED'), 'sed', native: true)
prove = find_program(get_option('PROVE'), native: true)
tar = find_program(get_option('TAR'), native: true)
gzip = find_program(get_option('GZIP'), native: true)
program_lz4 = find_program(get_option('LZ4'), native: true, required: false)
touch = find_program('touch', native: true)
program_zstd = find_program(get_option('ZSTD'), native: true, required: false)
dtrace = find_program(get_option('DTRACE'), native: true, required: get_option('dtrace'))
missing = find_program('config/missing', native: true)
# used by PGXS
install_sh = find_program('config/install-sh', native: true)
bison_flags = []
if bison.found()
bison_version_c = run_command(bison, '--version', check: true)
# bison version string helpfully is something like
# >>bison (GNU bison) 3.8.1<<
bison_version = bison_version_c.stdout().split(' ')[3].split('\n')[0]
if bison_version.version_compare('>=3.0')
bison_flags += ['-Wno-deprecated']
endif
endif
bison_cmd = [bison, bison_flags, '-o', '@OUTPUT0@', '-d', '@INPUT@']
bison_kw = {
'output': ['@BASENAME@.c', '@BASENAME@.h'],
'command': bison_cmd,
}
flex_flags = []
flex_wrapper = files('src/tools/pgflex')
flex_cmd = [python, flex_wrapper,
'--builddir', '@BUILD_ROOT@',
'--srcdir', '@SOURCE_ROOT@',
'--privatedir', '@PRIVATE_DIR@',
'--flex', flex, '--perl', perl,
'-i', '@INPUT@', '-o', '@OUTPUT0@',
]
wget = find_program('wget', required: false, native: true)
wget_flags = ['-O', '@OUTPUT0@', '--no-use-server-timestamps']
###############################################################
# Path to meson (for tests etc)
###############################################################
# NB: this should really be part of meson, see
# https://github.com/mesonbuild/meson/issues/8511
meson_binpath_r = run_command(python, 'src/tools/find_meson', check: true)
if meson_binpath_r.returncode() != 0 or meson_binpath_r.stdout() == ''
error('huh, could not run find_meson.\nerrcode: @0@\nstdout: @1@\nstderr: @2@'.format(
meson_binpath_r.returncode(),
meson_binpath_r.stdout(),
meson_binpath_r.stderr()))
endif
meson_binpath_s = meson_binpath_r.stdout().split('\n')
meson_binpath_len = meson_binpath_s.length()
if meson_binpath_len < 1
error('unexpected introspect line @0@'.format(meson_binpath_r.stdout()))
endif
i = 0
meson_impl = ''
meson_binpath = ''
meson_args = []
foreach e : meson_binpath_s
if i == 0
meson_impl = e
elif i == 1
meson_binpath = e
else
meson_args += e
endif
i += 1
endforeach
if meson_impl not in ['muon', 'meson']
error('unknown meson implementation "@0@"'.format(meson_impl))
endif
meson_bin = find_program(meson_binpath, native: true)
###############################################################
# Option Handling
###############################################################
cdata.set('USE_ASSERT_CHECKING', get_option('cassert') ? 1 : false)
cdata.set('BLCKSZ', get_option('blocksize').to_int() * 1024, description:
'''Size of a disk block --- this also limits the size of a tuple. You can set
it bigger if you need bigger tuples (although TOAST should reduce the need
to have large tuples, since fields can be spread across multiple tuples).
BLCKSZ must be a power of 2. The maximum possible value of BLCKSZ is
currently 2^15 (32768). This is determined by the 15-bit widths of the
lp_off and lp_len fields in ItemIdData (see include/storage/itemid.h).
Changing BLCKSZ requires an initdb.''')
cdata.set('XLOG_BLCKSZ', get_option('wal_blocksize').to_int() * 1024)
cdata.set('RELSEG_SIZE', get_option('segsize') * 131072)
cdata.set('DEF_PGPORT', get_option('pgport'))
cdata.set_quoted('DEF_PGPORT_STR', get_option('pgport').to_string())
cdata.set_quoted('PG_KRB_SRVNAM', get_option('krb_srvnam'))
if get_option('system_tzdata') != ''
cdata.set_quoted('SYSTEMTZDIR', get_option('system_tzdata'))
endif
###############################################################
# Directories
###############################################################
# These are set by the equivalent --xxxdir configure options. We
# append "postgresql" to some of them, if the string does not already
# contain "pgsql" or "postgres", in order to avoid directory clutter.
pkg = 'postgresql'
dir_prefix = get_option('prefix')
dir_bin = get_option('bindir')
dir_data = get_option('datadir')
if not (dir_data.contains('pgsql') or dir_data.contains('postgres'))
dir_data = dir_data / pkg
endif
dir_sysconf = get_option('sysconfdir')
if not (dir_sysconf.contains('pgsql') or dir_sysconf.contains('postgres'))
dir_sysconf = dir_sysconf / pkg
endif
dir_lib = get_option('libdir')
dir_lib_pkg = dir_lib
if not (dir_lib_pkg.contains('pgsql') or dir_lib_pkg.contains('postgres'))
dir_lib_pkg = dir_lib_pkg / pkg
endif
dir_pgxs = dir_lib_pkg / 'pgxs'
dir_include = get_option('includedir')
dir_include_pkg = dir_include
dir_include_pkg_rel = ''
if not (dir_include_pkg.contains('pgsql') or dir_include_pkg.contains('postgres'))
dir_include_pkg = dir_include_pkg / pkg
dir_include_pkg_rel = pkg
endif
dir_man = get_option('mandir')
# FIXME: These used to be separately configurable - worth adding?
dir_doc = get_option('datadir') / 'doc' / 'postgresql'
dir_doc_html = dir_doc
dir_locale = get_option('localedir')
# Derived values
dir_bitcode = dir_lib_pkg / 'bitcode'
dir_include_internal = dir_include_pkg / 'internal'
dir_include_server = dir_include_pkg / 'server'
dir_include_extension = dir_include_server / 'extension'
dir_data_extension = dir_data / 'extension'
###############################################################
# Search paths, preparation for compiler tests
#
# NB: Arguments added later are not automatically used for subsequent
# configuration-time checks (so they are more isolated). If they should be
# used, they need to be added to test_c_args as well.
###############################################################
postgres_inc = [include_directories(postgres_inc_d)]
test_lib_d = postgres_lib_d
test_c_args = cppflags + cflags
###############################################################
# Library: bsd-auth
###############################################################
bsd_authopt = get_option('bsd_auth')
bsd_auth = not_found_dep
if cc.check_header('bsd_auth.h', required: bsd_authopt,
args: test_c_args, include_directories: postgres_inc)
cdata.set('USE_BSD_AUTH', 1)
bsd_auth = declare_dependency()
endif
###############################################################
# Library: bonjour
#
# For now don't search for DNSServiceRegister in a library - only Apple's
# Bonjour implementation, which is always linked, works.
###############################################################
bonjouropt = get_option('bonjour')
bonjour = dependency('', required : false)
if cc.check_header('dns_sd.h', required: bonjouropt,
args: test_c_args, include_directories: postgres_inc) and \
cc.has_function('DNSServiceRegister',
args: test_c_args, include_directories: postgres_inc)
cdata.set('USE_BONJOUR', 1)
bonjour = declare_dependency()
endif
###############################################################
# Library: GSSAPI
###############################################################
gssapiopt = get_option('gssapi')
krb_srvtab = ''
have_gssapi = false
if not gssapiopt.disabled()
gssapi = dependency('krb5-gssapi', required: gssapiopt)
have_gssapi = gssapi.found()
if not have_gssapi
elif cc.check_header('gssapi/gssapi.h', dependencies: gssapi, required: false,
args: test_c_args, include_directories: postgres_inc)
cdata.set('HAVE_GSSAPI_GSSAPI_H', 1)
elif cc.check_header('gssapi.h', args: test_c_args, dependencies: gssapi, required: gssapiopt)
cdata.set('HAVE_GSSAPI_H', 1)
else
have_gssapi = false
endif
if not have_gssapi
elif cc.has_function('gss_init_sec_context', dependencies: gssapi,
args: test_c_args, include_directories: postgres_inc)
cdata.set('ENABLE_GSS', 1)
krb_srvtab = 'FILE:/@0@/krb5.keytab)'.format(get_option('sysconfdir'))
cdata.set_quoted('PG_KRB_SRVTAB', krb_srvtab)
elif gssapiopt.enabled()
error('''could not find function 'gss_init_sec_context' required for GSSAPI''')
else
have_gssapi = false
endif
endif
if not have_gssapi
gssapi = not_found_dep
endif
###############################################################
# Library: ldap
###############################################################
ldapopt = get_option('ldap')
if ldapopt.disabled()
ldap = not_found_dep
ldap_r = not_found_dep
elif host_system == 'windows'
ldap = cc.find_library('wldap32', required: ldapopt)
ldap_r = ldap
else
# macos framework dependency is buggy for ldap (one can argue whether it's
# Apple's or meson's fault), leading to an endless recursion with ldap.h
# including itself. See https://github.com/mesonbuild/meson/issues/10002
# Luckily we only need pkg-config support, so the workaround isn't
# complicated.
ldap = dependency('ldap', method: 'pkg-config', required: false)
ldap_r = ldap
# Before 2.5 openldap didn't have a pkg-config file, and it might not be
# installed
if not ldap.found()
ldap = cc.find_library('ldap', required: ldapopt, dirs: test_lib_d,
has_headers: 'ldap.h', header_include_directories: postgres_inc)
# The separate ldap_r library only exists in OpenLDAP < 2.5, and if we
# have 2.5 or later, we shouldn't even probe for ldap_r (we might find a
# library from a separate OpenLDAP installation). The most reliable
# way to check that is to check for a function introduced in 2.5.
if not ldap.found()
# don't have ldap, we shouldn't check for ldap_r
elif cc.has_function('ldap_verify_credentials',
dependencies: ldap, args: test_c_args)
ldap_r = ldap # ldap >= 2.5, no need for ldap_r
else
# Use ldap_r for FE if available, else assume ldap is thread-safe.
ldap_r = cc.find_library('ldap_r', required: false, dirs: test_lib_d,
has_headers: 'ldap.h', header_include_directories: postgres_inc)
if not ldap_r.found()
ldap_r = ldap
else
# On some platforms ldap_r fails to link without PTHREAD_LIBS.
ldap_r = declare_dependency(dependencies: [ldap_r, thread_dep])
endif
# PostgreSQL sometimes loads libldap_r and plain libldap into the same
# process. Check for OpenLDAP versions known not to tolerate doing so;
# assume non-OpenLDAP implementations are safe. The dblink test suite
# exercises the hazardous interaction directly.
compat_test_code = '''
#include <ldap.h>
#if !defined(LDAP_VENDOR_VERSION) || \
(defined(LDAP_API_FEATURE_X_OPENLDAP) && \
LDAP_VENDOR_VERSION >= 20424 && LDAP_VENDOR_VERSION <= 20431)
choke me
#endif
'''
if not cc.compiles(compat_test_code,
name: 'LDAP implementation compatible',
dependencies: ldap, args: test_c_args)
warning('''
*** With OpenLDAP versions 2.4.24 through 2.4.31, inclusive, each backend
*** process that loads libpq (via WAL receiver, dblink, or postgres_fdw) and
*** also uses LDAP will crash on exit.''')
endif
endif
endif
# XXX: this shouldn't be tested in the windows case, but should be tested in
# the dependency() success case
if ldap.found() and cc.has_function('ldap_initialize',
dependencies: ldap, args: test_c_args)
cdata.set('HAVE_LDAP_INITIALIZE', 1)
endif
endif
if ldap.found()
assert(ldap_r.found())
cdata.set('USE_LDAP', 1)
else
assert(not ldap_r.found())
endif
###############################################################
# Library: LLVM
###############################################################
llvmopt = get_option('llvm')
if not llvmopt.disabled()
add_languages('cpp', required: true, native: false)
llvm = dependency('llvm', version: '>=3.9', method: 'config-tool', required: llvmopt)
if llvm.found()
cdata.set('USE_LLVM', 1)
cpp = meson.get_compiler('cpp')
llvm_binpath = llvm.get_variable(configtool: 'bindir')
ccache = find_program('ccache', native: true, required: false)
clang = find_program(llvm_binpath / 'clang', required: true)
endif
else
llvm = not_found_dep
endif
###############################################################
# Library: icu
###############################################################
icuopt = get_option('icu')
if not icuopt.disabled()
icu = dependency('icu-uc', required: icuopt.enabled())
icu_i18n = dependency('icu-i18n', required: icuopt.enabled())
if icu.found()
cdata.set('USE_ICU', 1)
endif
else
icu = not_found_dep
icu_i18n = not_found_dep
endif
###############################################################
# Library: libxml
###############################################################
libxmlopt = get_option('libxml')
if not libxmlopt.disabled()
libxml = dependency('libxml-2.0', required: libxmlopt, version: '>= 2.6.23')
if libxml.found()
cdata.set('USE_LIBXML', 1)
endif
else
libxml = not_found_dep
endif
###############################################################
# Library: libxslt
###############################################################
libxsltopt = get_option('libxslt')
if not libxsltopt.disabled()
libxslt = dependency('libxslt', required: libxsltopt)
if libxslt.found()
cdata.set('USE_LIBXSLT', 1)
endif
else
libxslt = not_found_dep
endif
###############################################################
# Library: lz4
###############################################################
lz4opt = get_option('lz4')
if not lz4opt.disabled()
lz4 = dependency('liblz4', required: lz4opt)
if lz4.found()
cdata.set('USE_LZ4', 1)
cdata.set('HAVE_LIBLZ4', 1)
endif
else
lz4 = not_found_dep
endif
###############################################################
# Library: Tcl (for pltcl)
#
# NB: tclConfig.sh is used in autoconf build for getting
# TCL_SHARED_BUILD, TCL_INCLUDE_SPEC, TCL_LIBS and TCL_LIB_SPEC
# variables. For now we have not seen a need to copy
# that behaviour to the meson build.
###############################################################
tclopt = get_option('pltcl')
tcl_version = get_option('tcl_version')
tcl_dep = not_found_dep
if not tclopt.disabled()
# via pkg-config
tcl_dep = dependency(tcl_version, required: false)
if not tcl_dep.found()
tcl_dep = cc.find_library(tcl_version,
required: tclopt,
dirs: test_lib_d)
endif
if not cc.has_header('tcl.h', dependencies: tcl_dep, required: tclopt)
tcl_dep = not_found_dep
endif
endif
###############################################################
# Library: pam
###############################################################
pamopt = get_option('pam')
if not pamopt.disabled()
pam = dependency('pam', required: false)
if not pam.found()
pam = cc.find_library('pam', required: pamopt, dirs: test_lib_d)
endif
if pam.found()
pam_header_found = false
# header file <security/pam_appl.h> or <pam/pam_appl.h> is required for PAM.
if cc.check_header('security/pam_appl.h', dependencies: pam, required: false,
args: test_c_args, include_directories: postgres_inc)
cdata.set('HAVE_SECURITY_PAM_APPL_H', 1)
pam_header_found = true
elif cc.check_header('pam/pam_appl.h', dependencies: pam, required: pamopt,
args: test_c_args, include_directories: postgres_inc)
cdata.set('HAVE_PAM_PAM_APPL_H', 1)
pam_header_found = true
endif
if pam_header_found
cdata.set('USE_PAM', 1)
else
pam = not_found_dep
endif
endif
else
pam = not_found_dep
endif
###############################################################
# Library: Perl (for plperl)
###############################################################
perlopt = get_option('plperl')
perl_dep = not_found_dep
if not perlopt.disabled()
perl_may_work = true
# First verify that perl has the necessary dependencies installed
perl_mods = run_command(
[perl,
'-MConfig', '-MOpcode', '-MExtUtils::Embed', '-MExtUtils::ParseXS',
'-e', ''],
check: false)
if perl_mods.returncode() != 0
perl_may_work = false
perl_msg = 'perl installation does not have the required modules'
endif
# Then inquire perl about its configuration
if perl_may_work
perl_conf_cmd = [perl, '-MConfig', '-e', 'print $Config{$ARGV[0]}']
perlversion = run_command(perl_conf_cmd, 'api_versionstring', check: true).stdout()
archlibexp = run_command(perl_conf_cmd, 'archlibexp', check: true).stdout()
privlibexp = run_command(perl_conf_cmd, 'privlibexp', check: true).stdout()
useshrplib = run_command(perl_conf_cmd, 'useshrplib', check: true).stdout()
perl_inc_dir = '@0@/CORE'.format(archlibexp)
if useshrplib != 'true'
perl_may_work = false
perl_msg = 'need a shared perl'
endif
endif
if perl_may_work
# On most platforms, archlibexp is also where the Perl include files live ...
perl_ccflags = ['-I@0@'.format(perl_inc_dir)]
# ... but on newer macOS versions, we must use -iwithsysroot to look
# under sysroot
if not fs.is_file('@0@/perl.h'.format(perl_inc_dir)) and \
fs.is_file('@0@@1@/perl.h'.format(pg_sysroot, perl_inc_dir))
perl_ccflags = ['-iwithsysroot', perl_inc_dir]
endif
# check compiler finds header
if not cc.has_header('perl.h', required: false,
args: test_c_args + perl_ccflags, include_directories: postgres_inc)
perl_may_work = false
perl_msg = 'missing perl.h'
endif
endif
if perl_may_work
perl_ccflags_r = run_command(perl_conf_cmd, 'ccflags', check: true).stdout()
# See comments for PGAC_CHECK_PERL_EMBED_CCFLAGS in perl.m4
foreach flag : perl_ccflags_r.split(' ')
if flag.startswith('-D') and \
(not flag.startswith('-D_') or flag == '_USE_32BIT_TIME_T')
perl_ccflags += flag
endif
endforeach
if host_system == 'windows'
perl_ccflags += ['-DPLPERL_HAVE_UID_GID']
endif
message('CCFLAGS recommended by perl: @0@'.format(perl_ccflags_r))
message('CCFLAGS for embedding perl: @0@'.format(' '.join(perl_ccflags)))
# We are after Embed's ldopts, but without the subset mentioned in
# Config's ccdlflags and ldflags. (Those are the choices of those who
# built the Perl installation, which are not necessarily appropriate
# for building PostgreSQL.)
ldopts = run_command(perl, '-MExtUtils::Embed', '-e', 'ldopts', check: true).stdout().strip()
undesired = run_command(perl_conf_cmd, 'ccdlflags', check: true).stdout().split()
undesired += run_command(perl_conf_cmd, 'ldflags', check: true).stdout().split()
perl_ldopts = []
foreach ldopt : ldopts.split(' ')
if ldopt == '' or ldopt in undesired
continue
endif
perl_ldopts += ldopt.strip('"')
endforeach
message('LDFLAGS recommended by perl: "@0@"'.format(ldopts))
message('LDFLAGS for embedding perl: "@0@"'.format(' '.join(perl_ldopts)))
perl_dep_int = declare_dependency(
compile_args: perl_ccflags,
link_args: perl_ldopts,
version: perlversion,
)
# While we're at it, check that we can link to libperl.
# On most platforms, if perl.h is there then libperl.so will be too, but
# at this writing Debian packages them separately.
perl_link_test = '''
/* see plperl.h */
#ifdef _MSC_VER
#define __inline__ inline
#endif
#include <EXTERN.h>
#include <perl.h>
int main(void)
{
perl_alloc();
}'''
if not cc.links(perl_link_test, name: 'libperl',
args: test_c_args + perl_ccflags + perl_ldopts,
include_directories: postgres_inc)
perl_may_work = false
perl_msg = 'missing libperl'
endif
endif # perl_may_work
if perl_may_work
perl_dep = perl_dep_int
else
if perlopt.enabled()
error('dependency plperl failed: @0@'.format(perl_msg))
else
message('disabling optional dependency plperl: @0@'.format(perl_msg))
endif
endif
endif
###############################################################
# Library: Python (for plpython)
###############################################################
pyopt = get_option('plpython')
if not pyopt.disabled()
pm = import('python')
python3_inst = pm.find_installation(required: pyopt.enabled())
python3_dep = python3_inst.dependency(embed: true, required: pyopt.enabled())
if not cc.check_header('Python.h', dependencies: python3_dep, required: pyopt.enabled())
python3_dep = not_found_dep
endif
else
python3_dep = not_found_dep
endif
###############################################################
# Library: Readline
###############################################################
if not get_option('readline').disabled()
libedit_preferred = get_option('libedit_preferred')
# Set the order of readline dependencies
check_readline_deps = libedit_preferred ? \
['libedit', 'readline'] : ['readline', 'libedit']
foreach readline_dep : check_readline_deps
readline = dependency(readline_dep, required: false)
if not readline.found()
readline = cc.find_library(readline_dep,
required: get_option('readline').enabled(),
dirs: test_lib_d)
endif
if readline.found()
break
endif
endforeach
if readline.found()
cdata.set('HAVE_LIBREADLINE', 1)
editline_prefix = {
'header_prefix': 'editline/',
'flag_prefix': 'EDITLINE_',
}
readline_prefix = {
'header_prefix': 'readline/',
'flag_prefix': 'READLINE_',
}
default_prefix = {
'header_prefix': '',
'flag_prefix': '',
}
# Set the order of prefixes
prefixes = libedit_preferred ? \
[editline_prefix, default_prefix, readline_prefix] : \
[readline_prefix, default_prefix, editline_prefix]
at_least_one_header_found = false
foreach header : ['history', 'readline']
is_found = false
foreach prefix : prefixes
header_file = '@0@@1@.h'.format(prefix['header_prefix'], header)
# Check history.h and readline.h
if not is_found and cc.has_header(header_file,
args: test_c_args, include_directories: postgres_inc,
dependencies: [readline], required: false)
if header == 'readline'
readline_h = header_file
endif
cdata.set('HAVE_@0@@1@_H'.format(prefix['flag_prefix'], header).to_upper(), 1)
is_found = true
at_least_one_header_found = true
endif
endforeach
endforeach
if not at_least_one_header_found
error('''readline header not found
If you have @0@ already installed, see see meson-log/meson-log.txt for details on the
failure. It is possible the compiler isn't looking in the proper directory.
Use -Dreadline=false to disable readline support.'''.format(readline_dep))
endif
check_funcs = [
'append_history',
'history_truncate_file',
'rl_completion_matches',
'rl_filename_completion_function',
'rl_reset_screen_size',
'rl_variable_bind',
]
foreach func : check_funcs
found = cc.has_function(func, dependencies: [readline],
args: test_c_args, include_directories: postgres_inc)
cdata.set('HAVE_'+func.to_upper(), found ? 1 : false)
endforeach
check_vars = [
'rl_completion_suppress_quote',
'rl_filename_quote_characters',
'rl_filename_quoting_function',
]
foreach var : check_vars
cdata.set('HAVE_'+var.to_upper(),
cc.has_header_symbol(readline_h, var,
args: test_c_args, include_directories: postgres_inc,
prefix: '#include <stdio.h>',
dependencies: [readline]) ? 1 : false)
endforeach
# If found via cc.find_library() ensure headers are found when using the
# dependency. On meson < 0.57 one cannot do compiler checks using the
# dependency returned by declare_dependency(), so we can't do this above.
if readline.type_name() == 'library'
readline = declare_dependency(dependencies: readline,
include_directories: postgres_inc)
endif
# On windows with mingw readline requires auto-import to successfully
# link, as the headers don't use declspec(dllimport)
if host_system == 'windows' and cc.get_id() != 'msvc'
readline = declare_dependency(dependencies: readline,
link_args: '-Wl,--enable-auto-import')
endif
endif
# XXX: Figure out whether to implement mingw warning equivalent
else
readline = not_found_dep
endif
###############################################################
# Library: selinux
###############################################################
selinux = not_found_dep
selinuxopt = get_option('selinux')
if meson.version().version_compare('>=0.59')
selinuxopt = selinuxopt.disable_auto_if(host_system != 'linux')
endif
selinux = dependency('libselinux', required: selinuxopt, version: '>= 2.1.10')
cdata.set('HAVE_LIBSELINUX',
selinux.found() ? 1 : false)
###############################################################
# Library: systemd
###############################################################
systemd = not_found_dep
systemdopt = get_option('systemd')
if meson.version().version_compare('>=0.59')
systemdopt = systemdopt.disable_auto_if(host_system != 'linux')
endif
systemd = dependency('libsystemd', required: systemdopt)
cdata.set('USE_SYSTEMD', systemd.found() ? 1 : false)
###############################################################
# Library: SSL
###############################################################
if get_option('ssl') == 'openssl'
# Try to find openssl via pkg-config et al, if that doesn't work
# (e.g. because it's provided as part of the OS, like on FreeBSD), look for
# the library names that we know about.
# via pkg-config et al
ssl = dependency('openssl', required: false)
# via library + headers
if not ssl.found()
ssl_lib = cc.find_library('ssl',
dirs: test_lib_d,
header_include_directories: postgres_inc,
has_headers: ['openssl/ssl.h', 'openssl/err.h'])
crypto_lib = cc.find_library('crypto',
dirs: test_lib_d,
header_include_directories: postgres_inc)
ssl_int = [ssl_lib, crypto_lib]
ssl = declare_dependency(dependencies: ssl_int,
include_directories: postgres_inc)
else
cc.has_header('openssl/ssl.h', args: test_c_args, dependencies: ssl, required: true)
cc.has_header('openssl/err.h', args: test_c_args, dependencies: ssl, required: true)
ssl_int = [ssl]
endif
check_funcs = [
['CRYPTO_new_ex_data', {'required': true}],
['SSL_new', {'required': true}],
# Function introduced in OpenSSL 1.0.2.
['X509_get_signature_nid'],
# Functions introduced in OpenSSL 1.1.0. We used to check for
# OPENSSL_VERSION_NUMBER, but that didn't work with 1.1.0, because LibreSSL
# defines OPENSSL_VERSION_NUMBER to claim version 2.0.0, even though it
# doesn't have these OpenSSL 1.1.0 functions. So check for individual
# functions.
['OPENSSL_init_ssl'],
['BIO_get_data'],
['BIO_meth_new'],
['ASN1_STRING_get0_data'],
['HMAC_CTX_new'],
['HMAC_CTX_free'],
# OpenSSL versions before 1.1.0 required setting callback functions, for
# thread-safety. In 1.1.0, it's no longer required, and CRYPTO_lock()
# function was removed.
['CRYPTO_lock'],
]
foreach c : check_funcs
func = c.get(0)
val = cc.has_function(func, args: test_c_args, dependencies: ssl_int)
required = c.get(1, {}).get('required', false)
if required and not val
error('openssl function @0@ is required'.format(func))
elif not required
cdata.set('HAVE_' + func.to_upper(), val ? 1 : false)
endif
endforeach
cdata.set('USE_OPENSSL', 1,
description: 'Define to 1 to build with OpenSSL support. (-Dssl=openssl)')
cdata.set('OPENSSL_API_COMPAT', '0x10001000L',
description: '''Define to the OpenSSL API version in use. This avoids deprecation warnings from newer OpenSSL versions.''')
else
ssl = not_found_dep
endif
###############################################################
# Library: uuid
###############################################################
uuidopt = get_option('uuid')
if uuidopt != 'none'
uuidname = uuidopt.to_upper()
if uuidopt == 'e2fs'
uuid = dependency('uuid', required: true)
uuidfunc = 'uuid_generate'
uuidheader = 'uuid/uuid.h'
elif uuidopt == 'bsd'
# libc should have uuid function
uuid = declare_dependency()
uuidfunc = 'uuid_to_string'
uuidheader = 'uuid.h'
elif uuidopt == 'ossp'
uuid = dependency('ossp-uuid', required: true)
uuidfunc = 'uuid_export'
uuidheader = 'ossp/uuid.h'
else
error('huh')
endif
if not cc.has_header_symbol(uuidheader, uuidfunc, args: test_c_args, dependencies: uuid)
error('uuid library @0@ missing required function @1@'.format(uuidopt, uuidfunc))
endif
cdata.set('HAVE_@0@'.format(uuidheader.underscorify().to_upper()), 1)
cdata.set('HAVE_UUID_@0@'.format(uuidname), 1,
description: 'Define to 1 if you have @0@ UUID support.'.format(uuidname))
else
uuid = not_found_dep
endif
###############################################################
# Library: zlib
###############################################################
zlibopt = get_option('zlib')
zlib = not_found_dep
if not zlibopt.disabled()
zlib_t = dependency('zlib', required: zlibopt)
if zlib_t.type_name() == 'internal'
# if fallback was used, we don't need to test if headers are present (they
# aren't built yet, so we can't test)
zlib = zlib_t
elif not zlib_t.found()
warning('did not find zlib')
elif not cc.has_header('zlib.h',
args: test_c_args, include_directories: postgres_inc,
dependencies: [zlib_t], required: zlibopt.enabled())
warning('zlib header not found')
elif not cc.has_type('z_streamp',
dependencies: [zlib_t], prefix: '#include <zlib.h>',
args: test_c_args, include_directories: postgres_inc)
if zlibopt.enabled()
error('zlib version is too old')
else
warning('zlib version is too old')
endif
else
zlib = zlib_t
endif
if zlib.found()
cdata.set('HAVE_LIBZ', 1)
endif
endif
###############################################################
# Library: tap test dependencies
###############################################################
# Check whether tap tests are enabled or not
tap_tests_enabled = false
tapopt = get_option('tap_tests')
if not tapopt.disabled()
# Checking for perl modules for tap tests
perl_ipc_run_check = run_command(perl, 'config/check_modules.pl', check: false)
if perl_ipc_run_check.returncode() != 0
message(perl_ipc_run_check.stderr().strip())
if tapopt.enabled()
error('Additional Perl modules are required to run TAP tests.')
else
warning('Additional Perl modules are required to run TAP tests.')
endif
else
tap_tests_enabled = true
endif
endif
###############################################################
# Library: zstd
###############################################################
zstdopt = get_option('zstd')
if not zstdopt.disabled()
zstd = dependency('libzstd', required: zstdopt, version: '>=1.4.0')
if zstd.found()
cdata.set('USE_ZSTD', 1)
cdata.set('HAVE_LIBZSTD', 1)
endif
else
zstd = not_found_dep
endif
###############################################################
# Compiler tests
###############################################################
# Do we need -std=c99 to compile C99 code? We don't want to add -std=c99
# unnecessarily, because we optionally rely on newer features.
c99_test = '''
#include <stdbool.h>
#include <complex.h>
#include <tgmath.h>
#include <inttypes.h>
struct named_init_test {
int a;
int b;
};
extern void structfunc(struct named_init_test);
int main(int argc, char **argv)
{
struct named_init_test nit = {
.a = 3,
.b = 5,
};
for (int loop_var = 0; loop_var < 3; loop_var++)
{
nit.a += nit.b;
}
structfunc((struct named_init_test){1, 0});
return nit.a != 0;
}
'''
if not cc.compiles(c99_test, name: 'c99', args: test_c_args)
if cc.compiles(c99_test, name: 'c99 with -std=c99',
args: test_c_args + ['-std=c99'])
test_c_args += '-std=c99'
cflags += '-std=c99'
else
error('C compiler does not support C99')
endif
endif
sizeof_long = cc.sizeof('long', args: test_c_args)
cdata.set('SIZEOF_LONG', sizeof_long)
if sizeof_long == 8
cdata.set('HAVE_LONG_INT_64', 1)
cdata.set('PG_INT64_TYPE', 'long int')
cdata.set_quoted('INT64_MODIFIER', 'l')
elif sizeof_long == 4 and cc.sizeof('long long', args: test_c_args) == 8
cdata.set('HAVE_LONG_LONG_INT_64', 1)
cdata.set('PG_INT64_TYPE', 'long long int')
cdata.set_quoted('INT64_MODIFIER', 'll')
else
error('do not know how to get a 64bit int')
endif
if host_machine.endian() == 'big'
cdata.set('WORDS_BIGENDIAN', 1)
endif
alignof_types = ['short', 'int', 'long', 'double']
maxalign = 0
foreach t : alignof_types
align = cc.alignment(t, args: test_c_args)
if maxalign < align
maxalign = align
endif
cdata.set('ALIGNOF_@0@'.format(t.to_upper()), align)
endforeach
cdata.set('MAXIMUM_ALIGNOF', maxalign)
cdata.set('SIZEOF_VOID_P', cc.sizeof('void *', args: test_c_args))
cdata.set('SIZEOF_SIZE_T', cc.sizeof('size_t', args: test_c_args))
# Check if __int128 is a working 128 bit integer type, and if so
# define PG_INT128_TYPE to that typename.
#
# This currently only detects a GCC/clang extension, but support for other
# environments may be added in the future.
#
# For the moment we only test for support for 128bit math; support for
# 128bit literals and snprintf is not required.
if cc.links('''
/*
* We don't actually run this test, just link it to verify that any support
* functions needed for __int128 are present.
*
* These are globals to discourage the compiler from folding all the
* arithmetic tests down to compile-time constants. We do not have
* convenient support for 128bit literals at this point...
*/
__int128 a = 48828125;
__int128 b = 97656250;
int main(void)
{
__int128 c,d;
a = (a << 12) + 1; /* 200000000001 */
b = (b << 12) + 5; /* 400000000005 */
/* try the most relevant arithmetic ops */
c = a * b;
d = (c + b) / b;
/* must use the results, else compiler may optimize arithmetic away */
return d != a+1;
}''',
name: '__int128',
args: test_c_args)
buggy_int128 = false
# Use of non-default alignment with __int128 tickles bugs in some compilers.
# If not cross-compiling, we can test for bugs and disable use of __int128
# with buggy compilers. If cross-compiling, hope for the best.
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83925
if not meson.is_cross_build()
r = cc.run('''
/* This must match the corresponding code in c.h: */
#if defined(__GNUC__) || defined(__SUNPRO_C) || defined(__IBMC__)
#define pg_attribute_aligned(a) __attribute__((aligned(a)))
#endif
typedef __int128 int128a
#if defined(pg_attribute_aligned)
pg_attribute_aligned(8)
#endif
;
int128a holder;
void pass_by_val(void *buffer, int128a par) { holder = par; }
int main(void)
{
long int i64 = 97656225L << 12;
int128a q;
pass_by_val(main, (int128a) i64);
q = (int128a) i64;
return q != holder;
}''',
name: '__int128 alignment bug',
args: test_c_args)
assert(r.compiled())
if r.returncode() != 0
buggy_int128 = true
message('__int128 support present but buggy and thus disabled')
endif
endif
if not buggy_int128
cdata.set('PG_INT128_TYPE', '__int128')
cdata.set('ALIGNOF_PG_INT128_TYPE', cc.
alignment('__int128', args: test_c_args))
endif
endif
# Check if the C compiler knows computed gotos (gcc extension, also
# available in at least clang). If so, define HAVE_COMPUTED_GOTO.
#
# Checking whether computed gotos are supported syntax-wise ought to
# be enough, as the syntax is otherwise illegal.
if cc.compiles('''
static inline int foo(void)
{
void *labeladdrs[] = {&&my_label};
goto *labeladdrs[0];
my_label:
return 1;
}''',
args: test_c_args)
cdata.set('HAVE_COMPUTED_GOTO', 1)
endif
# Check if the C compiler understands _Static_assert(),
# and define HAVE__STATIC_ASSERT if so.
#
# We actually check the syntax ({ _Static_assert(...) }), because we need
# gcc-style compound expressions to be able to wrap the thing into macros.
if cc.compiles('''
int main(int arg, char **argv)
{
({ _Static_assert(1, "foo"); });
}
''',
args: test_c_args)
cdata.set('HAVE__STATIC_ASSERT', 1)
endif
# We use <stdbool.h> if we have it and it declares type bool as having
# size 1. Otherwise, c.h will fall back to declaring bool as unsigned char.
if cc.has_type('_Bool', args: test_c_args) \
and cc.has_type('bool', prefix: '#include <stdbool.h>', args: test_c_args) \
and cc.sizeof('bool', prefix: '#include <stdbool.h>', args: test_c_args) == 1
cdata.set('HAVE__BOOL', 1)
cdata.set('PG_USE_STDBOOL', 1)
endif
# Need to check a call with %m because netbsd supports gnu_printf but emits a
# warning for each use of %m.
printf_attributes = ['gnu_printf', '__syslog__', 'printf']
testsrc = '''
extern void emit_log(int ignore, const char *fmt,...) __attribute__((format(@0@, 2,3)));
static void call_log(void)
{
emit_log(0, "error: %s: %m", "foo");
}
'''
attrib_error_args = cc.get_supported_arguments('-Werror=format', '-Werror=ignored-attributes')
foreach a : printf_attributes
if cc.compiles(testsrc.format(a),
args: test_c_args + attrib_error_args, name: 'format ' + a)
cdata.set('PG_PRINTF_ATTRIBUTE', a)
break
endif
endforeach
if cc.has_function_attribute('visibility:default') and \
cc.has_function_attribute('visibility:hidden')
cdata.set('HAVE_VISIBILITY_ATTRIBUTE', 1)
# Only newer versions of meson know not to apply gnu_symbol_visibility =
# inlineshidden to C code as well... Any either way, we want to put these
# flags into exported files (pgxs, .pc files).
cflags_mod += '-fvisibility=hidden'
cxxflags_mod += ['-fvisibility=hidden', '-fvisibility-inlines-hidden']
ldflags_mod += '-fvisibility=hidden'
endif
# Check if various builtins exist. Some builtins are tested separately,
# because we want to test something more complicated than the generic case.
builtins = [
'bswap16',
'bswap32',
'bswap64',
'clz',
'ctz',
'constant_p',
'frame_address',
'popcount',
'unreachable',
]
foreach builtin : builtins
fname = '__builtin_@0@'.format(builtin)
if cc.has_function(fname, args: test_c_args)
cdata.set('HAVE@0@'.format(fname.to_upper()), 1)
endif
endforeach
# Check if the C compiler understands __builtin_types_compatible_p,
# and define HAVE__BUILTIN_TYPES_COMPATIBLE_P if so.
#
# We check usage with __typeof__, though it's unlikely any compiler would
# have the former and not the latter.
if cc.compiles('''
static int x;
static int y[__builtin_types_compatible_p(__typeof__(x), int)];
''',
name: '__builtin_types_compatible_p',
args: test_c_args)
cdata.set('HAVE__BUILTIN_TYPES_COMPATIBLE_P', 1)
endif
# Check if the C compiler understands __builtin_$op_overflow(),
# and define HAVE__BUILTIN_OP_OVERFLOW if so.
#
# Check for the most complicated case, 64 bit multiplication, as a
# proxy for all of the operations. To detect the case where the compiler
# knows the function but library support is missing, we must link not just
# compile, and store the results in global variables so the compiler doesn't
# optimize away the call.
if cc.links('''
INT64 a = 1;
INT64 b = 1;
INT64 result;
int main(void)
{
return __builtin_mul_overflow(a, b, &result);
}''',
name: '__builtin_mul_overflow',
args: test_c_args + ['-DINT64=@0@'.format(cdata.get('PG_INT64_TYPE'))],
)
cdata.set('HAVE__BUILTIN_OP_OVERFLOW', 1)
endif
# XXX: The configure.ac check for __cpuid() is broken, we don't copy that
# here. To prevent problems due to two detection methods working, stop
# checking after one.
if cc.links('''
#include <cpuid.h>
int main(int arg, char **argv)
{
unsigned int exx[4] = {0, 0, 0, 0};
__get_cpuid(1, &exx[0], &exx[1], &exx[2], &exx[3]);
}
''', name: '__get_cpuid',
args: test_c_args)
cdata.set('HAVE__GET_CPUID', 1)
elif cc.links('''
#include <intrin.h>
int main(int arg, char **argv)
{
unsigned int exx[4] = {0, 0, 0, 0};
__cpuid(exx, 1);
}
''', name: '__cpuid',
args: test_c_args)
cdata.set('HAVE__CPUID', 1)
endif
# Defend against clang being used on x86-32 without SSE2 enabled. As current
# versions of clang do not understand -fexcess-precision=standard, the use of
# x87 floating point operations leads to problems like isinf possibly returning
# false for a value that is infinite when converted from the 80bit register to
# the 8byte memory representation.
#
# Only perform the test if the compiler doesn't understand
# -fexcess-precision=standard, that way a potentially fixed compiler will work
# automatically.
if '-fexcess-precision=standard' not in cflags
if not cc.compiles('''
#if defined(__clang__) && defined(__i386__) && !defined(__SSE2_MATH__)
choke me
#endif''',
name: '', args: test_c_args)
error('Compiling PostgreSQL with clang, on 32bit x86, requires SSE2 support. Use -msse2 or use gcc.')
endif
endif
###############################################################
# Compiler flags
###############################################################
common_functional_flags = [
# Disable strict-aliasing rules; needed for gcc 3.3+
'-fno-strict-aliasing',
# Disable optimizations that assume no overflow; needed for gcc 4.3+
'-fwrapv',
'-fexcess-precision=standard',
]
cflags += cc.get_supported_arguments(common_functional_flags)
if llvm.found()
cxxflags += cpp.get_supported_arguments(common_functional_flags)
endif
vectorize_cflags = cc.get_supported_arguments(['-ftree-vectorize'])
unroll_loops_cflags = cc.get_supported_arguments(['-funroll-loops'])
common_warning_flags = [
'-Wmissing-prototypes',
'-Wpointer-arith',
# Really don't want VLAs to be used in our dialect of C
'-Werror=vla',
# On macOS, complain about usage of symbols newer than the deployment target
'-Werror=unguarded-availability-new',
'-Wendif-labels',
'-Wmissing-format-attribute',
'-Wimplicit-fallthrough=3',
'-Wcast-function-type',
# This was included in -Wall/-Wformat in older GCC versions
'-Wformat-security',
]
cflags_warn += cc.get_supported_arguments(common_warning_flags)
if llvm.found()
cxxflags_warn += cpp.get_supported_arguments(common_warning_flags)
endif
# A few places with imported code get a pass on -Wdeclaration-after-statement, remember
# the result for them
if cc.has_argument('-Wdeclaration-after-statement')
cflags_warn += '-Wdeclaration-after-statement'
using_declaration_after_statement_warning = true
else
using_declaration_after_statement_warning = false
endif
# The following tests want to suppress various unhelpful warnings by adding
# -Wno-foo switches. But gcc won't complain about unrecognized -Wno-foo
# switches, so we have to test for the positive form and if that works,
# add the negative form.
negative_warning_flags = [
# Suppress clang's unhelpful unused-command-line-argument warnings.
'unused-command-line-argument',
# Remove clang 12+'s compound-token-split-by-macro, as this causes a lot
# of warnings when building plperl because of usages in the Perl headers.
'compound-token-split-by-macro',
# Similarly disable useless truncation warnings from gcc 8+
'format-truncation',
'stringop-truncation',
# To make warning_level=2 / -Wextra work, we'd need at least the following
# 'clobbered',
# 'missing-field-initializers',
# 'sign-compare',
# 'unused-parameter',
]
foreach w : negative_warning_flags
if cc.has_argument('-W' + w)
cflags_warn += '-Wno-' + w
endif
if llvm.found() and cpp.has_argument('-W' + w)
cxxflags_warn += '-Wno-' + w
endif
endforeach
# From Project.pm
if cc.get_id() == 'msvc'
cflags_warn += [
'/wd4018', # signed/unsigned mismatch
'/wd4244', # conversion from 'type1' to 'type2', possible loss of data
'/wd4273', # inconsistent DLL linkage
'/wd4101', # unreferenced local variable
'/wd4102', # unreferenced label
'/wd4090', # different 'modifier' qualifiers
'/wd4267', # conversion from 'size_t' to 'type', possible loss of data
]
cppflags += [
'/DWIN32',
'/DWINDOWS',
'/D__WINDOWS__',
'/D__WIN32__',
'/D_CRT_SECURE_NO_DEPRECATE',
'/D_CRT_NONSTDC_NO_DEPRECATE',
]
# We never need export libraries. As link.exe reports their creation, they
# are unnecessarily noisy. Similarly, we don't need import library for
# modules, we only import them dynamically, and they're also noisy.
ldflags += '/NOEXP'
ldflags_mod += '/NOIMPLIB'
endif
###############################################################
# Atomics
###############################################################
if not get_option('spinlocks')
warning('Not using spinlocks will cause poor performance')
else
cdata.set('HAVE_SPINLOCKS', 1)
endif
if not get_option('atomics')
warning('Not using atomics will cause poor performance')
else
# XXX: perhaps we should require some atomics support in this case these
# days?
cdata.set('HAVE_ATOMICS', 1)
atomic_checks = [
{'name': 'HAVE_GCC__SYNC_CHAR_TAS',
'desc': '__sync_lock_test_and_set(char)',
'test': '''
char lock = 0;
__sync_lock_test_and_set(&lock, 1);
__sync_lock_release(&lock);'''},
{'name': 'HAVE_GCC__SYNC_INT32_TAS',
'desc': '__sync_lock_test_and_set(int32)',
'test': '''
int lock = 0;
__sync_lock_test_and_set(&lock, 1);
__sync_lock_release(&lock);'''},
{'name': 'HAVE_GCC__SYNC_INT32_CAS',
'desc': '__sync_val_compare_and_swap(int32)',
'test': '''
int val = 0;
__sync_val_compare_and_swap(&val, 0, 37);'''},
{'name': 'HAVE_GCC__SYNC_INT64_CAS',
'desc': '__sync_val_compare_and_swap(int64)',
'test': '''
INT64 val = 0;
__sync_val_compare_and_swap(&val, 0, 37);'''},
{'name': 'HAVE_GCC__ATOMIC_INT32_CAS',
'desc': ' __atomic_compare_exchange_n(int32)',
'test': '''
int val = 0;
int expect = 0;
__atomic_compare_exchange_n(&val, &expect, 37, 0, __ATOMIC_SEQ_CST, __ATOMIC_RELAXED);'''},
{'name': 'HAVE_GCC__ATOMIC_INT64_CAS',
'desc': ' __atomic_compare_exchange_n(int64)',
'test': '''
INT64 val = 0;
INT64 expect = 0;
__atomic_compare_exchange_n(&val, &expect, 37, 0, __ATOMIC_SEQ_CST, __ATOMIC_RELAXED);'''},
]
foreach check : atomic_checks
test = '''
int main(void)
{
@0@
}'''.format(check['test'])
cdata.set(check['name'],
cc.links(test,
name: check['desc'],
args: test_c_args + ['-DINT64=@0@'.format(cdata.get('PG_INT64_TYPE'))]) ? 1 : false
)
endforeach
endif
###############################################################
# Select CRC-32C implementation.
#
# If we are targeting a processor that has Intel SSE 4.2 instructions, we can
# use the special CRC instructions for calculating CRC-32C. If we're not
# targeting such a processor, but we can nevertheless produce code that uses
# the SSE intrinsics, perhaps with some extra CFLAGS, compile both
# implementations and select which one to use at runtime, depending on whether
# SSE 4.2 is supported by the processor we're running on.
#
# Similarly, if we are targeting an ARM processor that has the CRC
# instructions that are part of the ARMv8 CRC Extension, use them. And if
# we're not targeting such a processor, but can nevertheless produce code that
# uses the CRC instructions, compile both, and select at runtime.
###############################################################
have_optimized_crc = false
cflags_crc = []
if host_cpu == 'x86' or host_cpu == 'x86_64'
if cc.get_id() == 'msvc'
cdata.set('USE_SSE42_CRC32C', false)
cdata.set('USE_SSE42_CRC32C_WITH_RUNTIME_CHECK', 1)
have_optimized_crc = true
else
prog = '''
#include <nmmintrin.h>
int main(void)
{
unsigned int crc = 0;
crc = _mm_crc32_u8(crc, 0);
crc = _mm_crc32_u32(crc, 0);
/* return computed value, to prevent the above being optimized away */
return crc == 0;
}
'''
if cc.links(prog, name: '_mm_crc32_u8 and _mm_crc32_u32 without -msse4.2',
args: test_c_args)
# Use Intel SSE 4.2 unconditionally.
cdata.set('USE_SSE42_CRC32C', 1)
have_optimized_crc = true
elif cc.links(prog, name: '_mm_crc32_u8 and _mm_crc32_u32 with -msse4.2',
args: test_c_args + ['-msse4.2'])
# Use Intel SSE 4.2, with runtime check. The CPUID instruction is needed for
# the runtime check.
cflags_crc += '-msse4.2'
cdata.set('USE_SSE42_CRC32C', false)
cdata.set('USE_SSE42_CRC32C_WITH_RUNTIME_CHECK', 1)
have_optimized_crc = true
endif
endif
elif host_cpu == 'arm' or host_cpu == 'aarch64'
prog = '''
#include <arm_acle.h>
int main(void)
{
unsigned int crc = 0;
crc = __crc32cb(crc, 0);
crc = __crc32ch(crc, 0);
crc = __crc32cw(crc, 0);
crc = __crc32cd(crc, 0);
/* return computed value, to prevent the above being optimized away */
return crc == 0;
}
'''
if cc.links(prog, name: '__crc32cb, __crc32ch, __crc32cw, and __crc32cd without -march=armv8-a+crc',
args: test_c_args)
# Use ARM CRC Extension unconditionally
cdata.set('USE_ARMV8_CRC32C', 1)
have_optimized_crc = true
elif cc.links(prog, name: '__crc32cb, __crc32ch, __crc32cw, and __crc32cd with -march=armv8-a+crc',
args: test_c_args + ['-march=armv8-a+crc'])
# Use ARM CRC Extension, with runtime check
cflags_crc += '-march=armv8-a+crc'
cdata.set('USE_ARMV8_CRC32C', false)
cdata.set('USE_ARMV8_CRC32C_WITH_RUNTIME_CHECK', 1)
have_optimized_crc = true
endif
endif
if not have_optimized_crc
# fall back to slicing-by-8 algorithm, which doesn't require any special CPU
# support.
cdata.set('USE_SLICING_BY_8_CRC32C', 1)
endif
###############################################################
# Other CPU specific stuff
###############################################################
if host_cpu == 'x86_64'
if cc.compiles('''
void main(void)
{
long long x = 1; long long r;
__asm__ __volatile__ (" popcntq %1,%0\n" : "=q"(r) : "rm"(x));
}''',
name: '@0@: popcntq instruction'.format(host_cpu),
args: test_c_args)
cdata.set('HAVE_X86_64_POPCNTQ', 1)
endif
elif host_cpu == 'ppc' or host_cpu == 'ppc64'
# Check if compiler accepts "i"(x) when __builtin_constant_p(x).
if cdata.has('HAVE__BUILTIN_CONSTANT_P')
if cc.compiles('''
static inline int
addi(int ra, int si)
{
int res = 0;
if (__builtin_constant_p(si))
__asm__ __volatile__(
" addi %0,%1,%2\n" : "=r"(res) : "b"(ra), "i"(si));
return res;
}
int test_adds(int x) { return addi(3, x) + addi(x, 5); }
''',
args: test_c_args)
cdata.set('HAVE_I_CONSTRAINT__BUILTIN_CONSTANT_P', 1)
endif
endif
endif
###############################################################
# Library / OS tests
###############################################################
# XXX: Might be worth conditioning some checks on the OS, to avoid doing
# unnecessary checks over and over, particularly on windows.
header_checks = [
'atomic.h',
'copyfile.h',
'crtdefs.h',
'execinfo.h',
'getopt.h',
'ifaddrs.h',
'langinfo.h',
'mbarrier.h',
'stdbool.h',
'strings.h',
'sys/epoll.h',
'sys/event.h',
'sys/personality.h',
'sys/prctl.h',
'sys/procctl.h',
'sys/signalfd.h',
'sys/ucred.h',
'termios.h',
'ucred.h',
]
foreach header : header_checks
varname = 'HAVE_' + header.underscorify().to_upper()
# Emulate autoconf behaviour of not-found->undef, found->1
found = cc.has_header(header,
include_directories: postgres_inc, args: test_c_args)
cdata.set(varname, found ? 1 : false,
description: 'Define to 1 if you have the <@0@> header file.'.format(header))
endforeach
decl_checks = [
['F_FULLFSYNC', 'fcntl.h'],
['fdatasync', 'unistd.h'],
['posix_fadvise', 'fcntl.h'],
['strlcat', 'string.h'],
['strlcpy', 'string.h'],
['strnlen', 'string.h'],
]
# Need to check for function declarations for these functions, because
# checking for library symbols wouldn't handle deployment target
# restrictions on macOS
decl_checks += [
['preadv', 'sys/uio.h'],
['pwritev', 'sys/uio.h'],
]
foreach c : decl_checks
func = c.get(0)
header = c.get(1)
args = c.get(2, {})
varname = 'HAVE_DECL_' + func.underscorify().to_upper()
found = cc.has_header_symbol(header, func,
args: test_c_args, include_directories: postgres_inc,
kwargs: args)
cdata.set10(varname, found, description:
'''Define to 1 if you have the declaration of `@0@', and to 0 if you
don't.'''.format(func))
endforeach
if cc.has_type('struct cmsgcred',
args: test_c_args + ['@0@'.format(cdata.get('HAVE_SYS_UCRED_H')) == 'false' ? '' : '-DHAVE_SYS_UCRED_H'],
include_directories: postgres_inc,
prefix: '''
#include <sys/socket.h>
#include <sys/param.h>
#ifdef HAVE_SYS_UCRED_H
#include <sys/ucred.h>
#endif''')
cdata.set('HAVE_STRUCT_CMSGCRED', 1)
else
cdata.set('HAVE_STRUCT_CMSGCRED', false)
endif
if cc.has_type('struct option',
args: test_c_args, include_directories: postgres_inc,
prefix: '@0@'.format(cdata.get('HAVE_GETOPT_H')) == '1' ? '#include <getopt.h>' : '')
cdata.set('HAVE_STRUCT_OPTION', 1)
endif
foreach c : ['opterr', 'optreset']
varname = 'HAVE_INT_' + c.underscorify().to_upper()
if cc.links('''
#include <unistd.h>
int main(void)
{
extern int @0@;
@0@ = 1;
}
'''.format(c), name: c, args: test_c_args)
cdata.set(varname, 1)
else
cdata.set(varname, false)
endif
endforeach
if cc.has_type('socklen_t',
args: test_c_args, include_directories: postgres_inc,
prefix: '''
#include <sys/socket.h>''')
cdata.set('HAVE_SOCKLEN_T', 1)
endif
if cc.has_member('struct sockaddr', 'sa_len',
args: test_c_args, include_directories: postgres_inc,
prefix: '''
#include <sys/types.h>
#include <sys/socket.h>''')
cdata.set('HAVE_STRUCT_SOCKADDR_SA_LEN', 1)
endif
if cc.has_member('struct tm', 'tm_zone',
args: test_c_args, include_directories: postgres_inc,
prefix: '''
#include <sys/types.h>
#include <time.h>
''')
cdata.set('HAVE_STRUCT_TM_TM_ZONE', 1)
endif
if cc.compiles('''
#include <time.h>
extern int foo(void);
int foo(void)
{
return timezone / 60;
}
''',
name: 'global variable `timezone\' exists',
args: test_c_args, include_directories: postgres_inc)
cdata.set('HAVE_INT_TIMEZONE', 1)
else
cdata.set('HAVE_INT_TIMEZONE', false)
endif
if cc.has_type('union semun',
args: test_c_args,
include_directories: postgres_inc,
prefix: '''
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>
''')
cdata.set('HAVE_UNION_SEMUN', 1)
endif
if cc.compiles('''
#include <string.h>
int main(void)
{
char buf[100];
switch (strerror_r(1, buf, sizeof(buf)))
{ case 0: break; default: break; }
}''',
name: 'strerror_r',
args: test_c_args, include_directories: postgres_inc)
cdata.set('STRERROR_R_INT', 1)
else
cdata.set('STRERROR_R_INT', false)
endif
# Check for the locale_t type and find the right header file. macOS
# needs xlocale.h; standard is locale.h, but glibc also has an
# xlocale.h file that we should not use.
if cc.has_type('locale_t', prefix: '#include <locale.h>')
cdata.set('HAVE_LOCALE_T', 1)
elif cc.has_type('locale_t', prefix: '#include <xlocale.h>')
cdata.set('HAVE_LOCALE_T', 1)
cdata.set('LOCALE_T_IN_XLOCALE', 1)
endif
# Check if the C compiler understands typeof or a variant. Define
# HAVE_TYPEOF if so, and define 'typeof' to the actual key word.
foreach kw : ['typeof', '__typeof__', 'decltype']
if cc.compiles('''
int main(void)
{
int x = 0;
@0@(x) y;
y = x;
return y;
}
'''.format(kw),
name: 'typeof()',
args: test_c_args, include_directories: postgres_inc)
cdata.set('HAVE_TYPEOF', 1)
if kw != 'typeof'
cdata.set('typeof', kw)
endif
break
endif
endforeach
# Try to find a declaration for wcstombs_l(). It might be in stdlib.h
# (following the POSIX requirement for wcstombs()), or in locale.h, or in
# xlocale.h. If it's in the latter, define WCSTOMBS_L_IN_XLOCALE.
wcstombs_l_test = '''
#include <stdlib.h>
#include <locale.h>
@0@
void main(void)
{
#ifndef wcstombs_l
(void) wcstombs_l;
#endif
}
'''
if (not cc.compiles(wcstombs_l_test.format(''),
name: 'wcstombs_l') and
cc.compiles(wcstombs_l_test.format('#include <xlocale.h>'),
name: 'wcstombs_l in xlocale.h'))
cdata.set('WCSTOMBS_L_IN_XLOCALE', 1)
endif
# MSVC doesn't cope well with defining restrict to __restrict, the spelling it
# understands, because it conflicts with __declspec(restrict). Therefore we
# define pg_restrict to the appropriate definition, which presumably won't
# conflict.
#
# We assume C99 support, so we don't need to make this conditional.
#
# XXX: Historically we allowed platforms to disable restrict in template
# files, but that was only added for AIX when building with XLC, which we
# don't support yet.
cdata.set('pg_restrict', '__restrict')
if cc.links('''
#include <machine/vmparam.h>
#include <sys/exec.h>
int main(void)
{
PS_STRINGS->ps_nargvstr = 1;
PS_STRINGS->ps_argvstr = "foo";
}
''',
name: 'PS_STRINGS', args: test_c_args)
cdata.set('HAVE_PS_STRINGS', 1)
else
cdata.set('HAVE_PS_STRINGS', false)
endif
# Most libraries are included only if they demonstrably provide a function we
# need, but libm is an exception: always include it, because there are too
# many compilers that play cute optimization games that will break probes for
# standard functions such as pow().
os_deps += cc.find_library('m', required: false)
rt_dep = cc.find_library('rt', required: false)
dl_dep = cc.find_library('dl', required: false)
util_dep = cc.find_library('util', required: false)
posix4_dep = cc.find_library('posix4', required: false)
getopt_dep = cc.find_library('getopt', required: false)
gnugetopt_dep = cc.find_library('gnugetopt', required: false)
# Check if we want to replace getopt/getopt_long even if provided by the system
# - Mingw has adopted a GNU-centric interpretation of optind/optreset,
# so always use our version on Windows
# - On OpenBSD and Solaris, getopt() doesn't do what we want for long options
# (i.e., allow '-' as a flag character), so use our version on those platforms
# - We want to use system's getopt_long() only if the system provides struct
# option
always_replace_getopt = host_system in ['windows', 'openbsd', 'solaris']
always_replace_getopt_long = host_system == 'windows' or not cdata.has('HAVE_STRUCT_OPTION')
# Required on BSDs
execinfo_dep = cc.find_library('execinfo', required: false)
if host_system == 'cygwin'
cygipc_dep = cc.find_library('cygipc', required: false)
else
cygipc_dep = not_found_dep
endif
if host_system == 'sunos'
socket_dep = cc.find_library('socket', required: false)
else
socket_dep = not_found_dep
endif
# XXX: Might be worth conditioning some checks on the OS, to avoid doing
# unnecessary checks over and over, particularly on windows.
func_checks = [
['_configthreadlocale', {'skip': host_system != 'windows'}],
['backtrace_symbols', {'dependencies': [execinfo_dep]}],
['clock_gettime', {'dependencies': [rt_dep, posix4_dep], 'define': false}],
['copyfile'],
# gcc/clang's sanitizer helper library provides dlopen but not dlsym, thus
# when enabling asan the dlopen check doesn't notice that -ldl is actually
# required. Just checking for dlsym() ought to suffice.
['dlsym', {'dependencies': [dl_dep], 'define': false}],
['explicit_bzero'],
['fdatasync', {'dependencies': [rt_dep, posix4_dep], 'define': false}], # Solaris
['getifaddrs'],
['getopt', {'dependencies': [getopt_dep, gnugetopt_dep], 'skip': always_replace_getopt}],
['getopt_long', {'dependencies': [getopt_dep, gnugetopt_dep], 'skip': always_replace_getopt_long}],
['getpeereid'],
['getpeerucred'],
['inet_aton'],
['inet_pton'],
['kqueue'],
['mbstowcs_l'],
['memset_s'],
['mkdtemp'],
['posix_fadvise'],
['posix_fallocate'],
['ppoll'],
['pstat'],
['pthread_barrier_wait', {'dependencies': [thread_dep]}],
['pthread_is_threaded_np', {'dependencies': [thread_dep]}],
['sem_init', {'dependencies': [rt_dep, thread_dep], 'skip': sema_kind != 'unnamed_posix', 'define': false}],
['setproctitle', {'dependencies': [util_dep]}],
['setproctitle_fast'],
['shm_open', {'dependencies': [rt_dep], 'define': false}],
['shm_unlink', {'dependencies': [rt_dep], 'define': false}],
['shmget', {'dependencies': [cygipc_dep], 'define': false}],
['socket', {'dependencies': [socket_dep], 'define': false}],
['strchrnul'],
['strerror_r', {'dependencies': [thread_dep]}],
['strlcat'],
['strlcpy'],
['strnlen'],
['strsignal'],
['sync_file_range'],
['syncfs'],
['uselocale'],
['wcstombs_l'],
]
func_check_results = {}
foreach c : func_checks
func = c.get(0)
kwargs = c.get(1, {})
deps = kwargs.get('dependencies', [])
if kwargs.get('skip', false)
continue
endif
found = cc.has_function(func, args: test_c_args)
if not found
foreach dep : deps
if not dep.found()
continue
endif
found = cc.has_function(func, args: test_c_args,
dependencies: [dep])
if found
os_deps += dep
break
endif
endforeach
endif
func_check_results += {func: found}
if kwargs.get('define', true)
# Emulate autoconf behaviour of not-found->undef, found->1
cdata.set('HAVE_' + func.underscorify().to_upper(),
found ? 1 : false,
description: 'Define to 1 if you have the `@0@\' function.'.format(func))
endif
endforeach
if cc.has_function('syslog', args: test_c_args) and \
cc.check_header('syslog.h', args: test_c_args)
cdata.set('HAVE_SYSLOG', 1)
endif
# if prerequisites for unnamed posix semas aren't fulfilled, fall back to sysv
# semaphores
if sema_kind == 'unnamed_posix' and \
not func_check_results.get('sem_init', false)
sema_kind = 'sysv'
endif
cdata.set('USE_@0@_SHARED_MEMORY'.format(shmem_kind.to_upper()), 1)
cdata.set('USE_@0@_SEMAPHORES'.format(sema_kind.to_upper()), 1)
cdata.set('MEMSET_LOOP_LIMIT', memset_loop_limit)
cdata.set_quoted('DLSUFFIX', dlsuffix)
###############################################################
# Threading
###############################################################
# XXX: About to rely on thread safety in the autoconf build, so not worth
# implementing a fallback.
cdata.set('ENABLE_THREAD_SAFETY', 1)
###############################################################
# NLS / Gettext
###############################################################
nlsopt = get_option('nls')
libintl = not_found_dep
if not nlsopt.disabled()
# otherwise there'd be lots of
# "Gettext not found, all translation (po) targets will be ignored."
# warnings if not found.
msgfmt = find_program('msgfmt', required: nlsopt.enabled(), native: true)
# meson 0.59 has this wrapped in dependency('int')
if (msgfmt.found() and
cc.check_header('libintl.h', required: nlsopt,
args: test_c_args, include_directories: postgres_inc))
# in libc
if cc.has_function('ngettext')
libintl = declare_dependency()
else
libintl = cc.find_library('intl',
has_headers: ['libintl.h'], required: nlsopt,
header_include_directories: postgres_inc,
dirs: test_lib_d)
endif
endif
if libintl.found()
i18n = import('i18n')
cdata.set('ENABLE_NLS', 1)
endif
endif
###############################################################
# Build
###############################################################
# Set up compiler / linker arguments to be used everywhere, individual targets
# can add further args directly, or indirectly via dependencies
add_project_arguments(cflags, language: ['c'])
add_project_arguments(cppflags, language: ['c'])
add_project_arguments(cflags_warn, language: ['c'])
add_project_arguments(cxxflags, language: ['cpp'])
add_project_arguments(cppflags, language: ['cpp'])
add_project_arguments(cxxflags_warn, language: ['cpp'])
add_project_link_arguments(ldflags, language: ['c', 'cpp'])
# Collect a number of lists of things while recursing through the source
# tree. Later steps then can use those.
# list of targets for various alias targets
backend_targets = []
bin_targets = []
pl_targets = []
contrib_targets = []
testprep_targets = []
# Define the tests to distribute them to the correct test styles later
test_deps = []
tests = []
# Default options for targets
# First identify rpaths
bin_install_rpaths = []
lib_install_rpaths = []
mod_install_rpaths = []
# Don't add rpaths on darwin for now - as long as only absolute references to
# libraries are needed, absolute LC_ID_DYLIB ensures libraries can be found in
# their final destination.
if host_system != 'darwin'
# Add absolute path to libdir to rpath. This ensures installed binaries /
# libraries find our libraries (mainly libpq).
bin_install_rpaths += dir_prefix / dir_lib
lib_install_rpaths += dir_prefix / dir_lib
mod_install_rpaths += dir_prefix / dir_lib
# Add extra_lib_dirs to rpath. This ensures we find libraries we depend on.
#
# Not needed on darwin even if we use relative rpaths for our own libraries,
# as the install_name of libraries in extra_lib_dirs will point to their
# location anyway.
bin_install_rpaths += postgres_lib_d
lib_install_rpaths += postgres_lib_d
mod_install_rpaths += postgres_lib_d
endif
# Define arguments for default targets
default_target_args = {
'implicit_include_directories': false,
'install': true,
}
default_lib_args = default_target_args + {
'name_prefix': '',
'install_rpath': ':'.join(lib_install_rpaths),
}
internal_lib_args = default_lib_args + {
'build_by_default': false,
'install': false,
}
default_mod_args = default_lib_args + {
'name_prefix': '',
'install_dir': dir_lib_pkg,
'install_rpath': ':'.join(mod_install_rpaths),
}
default_bin_args = default_target_args + {
'install_dir': dir_bin,
'install_rpath': ':'.join(bin_install_rpaths),
}
# Helper for exporting a limited number of symbols
gen_export_kwargs = {
'input': 'exports.txt',
'output': '@BASENAME@.'+export_file_suffix,
'command': [perl, files('src/tools/gen_export.pl'),
'--format', export_file_format,
'--input', '@INPUT0@', '--output', '@OUTPUT0@'],
'build_by_default': false,
'install': false,
}
# headers that the whole build tree depends on
generated_headers = []
# headers that the backend build depends on
generated_backend_headers = []
# configure_files() output, needs a way of converting to file names
configure_files = []
# generated files that might conflict with a partial in-tree autoconf build
generated_sources = []
# same, for paths that differ between autoconf / meson builds
# elements are [dir, [files]]
generated_sources_ac = {}
# First visit src/include - all targets creating headers are defined
# within. That makes it easy to add the necessary dependencies for the
# subsequent build steps.
subdir('src/include')
subdir('config')
# Then through src/port and src/common, as most other things depend on them
frontend_port_code = declare_dependency(
compile_args: ['-DFRONTEND'],
include_directories: [postgres_inc],
dependencies: os_deps,
)
backend_port_code = declare_dependency(
compile_args: ['-DBUILDING_DLL'],
include_directories: [postgres_inc],
sources: [errcodes], # errcodes.h is needed due to use of ereport
dependencies: os_deps,
)
subdir('src/port')
frontend_common_code = declare_dependency(
compile_args: ['-DFRONTEND'],
include_directories: [postgres_inc],
sources: generated_headers,
dependencies: [os_deps, zlib, zstd],
)
backend_common_code = declare_dependency(
compile_args: ['-DBUILDING_DLL'],
include_directories: [postgres_inc],
sources: generated_headers,
dependencies: [os_deps, zlib, zstd],
)
subdir('src/common')
# all shared libraries should depend on shlib_code
shlib_code = declare_dependency(
link_args: ldflags_sl,
)
# all static libraries not part of the backend should depend on this
frontend_stlib_code = declare_dependency(
include_directories: [postgres_inc],
link_with: [common_static, pgport_static],
sources: generated_headers,
dependencies: [os_deps, libintl],
)
# all shared libraries not part of the backend should depend on this
frontend_shlib_code = declare_dependency(
include_directories: [postgres_inc],
link_with: [common_shlib, pgport_shlib],
sources: generated_headers,
dependencies: [shlib_code, os_deps, libintl],
)
# Dependencies both for static and shared libpq
libpq_deps += [
thread_dep,
gssapi,
ldap_r,
libintl,
ssl,
]
subdir('src/interfaces/libpq')
# fe_utils depends on libpq
subdir('src/fe_utils')
# for frontend binaries
frontend_code = declare_dependency(
include_directories: [postgres_inc],
link_with: [fe_utils, common_static, pgport_static],
sources: generated_headers,
dependencies: [os_deps, libintl],
)
backend_both_deps += [
thread_dep,
bsd_auth,
gssapi,
icu,
icu_i18n,
ldap,
libintl,
libxml,
lz4,
pam,
ssl,
systemd,
zlib,
zstd,
]
backend_mod_deps = backend_both_deps + os_deps
backend_code = declare_dependency(
compile_args: ['-DBUILDING_DLL'],
include_directories: [postgres_inc],
link_args: ldflags_be,
link_with: [],
sources: generated_headers + generated_backend_headers,
dependencies: os_deps + backend_both_deps + backend_deps,
)
# src/backend/meson.build defines backend_mod_code used for extension
# libraries.
# Then through the main sources. That way contrib can have dependencies on
# main sources. Note that this explicitly doesn't enter src/test, right now a
# few regression tests depend on contrib files.
subdir('src')
subdir('contrib')
subdir('src/test')
subdir('src/interfaces/libpq/test')
subdir('src/interfaces/ecpg/test')
subdir('doc/src/sgml')
generated_sources_ac += {'': ['GNUmakefile']}
# If there are any files in the source directory that we also generate in the
# build directory, they might get preferred over the newly generated files,
# e.g. because of a #include "file", which always will search in the current
# directory first.
message('checking for file conflicts between source and build directory')
conflicting_files = []
potentially_conflicting_files_t = []
potentially_conflicting_files_t += generated_headers
potentially_conflicting_files_t += generated_backend_headers
potentially_conflicting_files_t += generated_backend_sources
potentially_conflicting_files_t += generated_sources
potentially_conflicting_files = []
# convert all sources of potentially conflicting files into uniform shape
foreach t : potentially_conflicting_files_t
potentially_conflicting_files += t.full_path()
endforeach
foreach t : configure_files
t = '@0@'.format(t)
potentially_conflicting_files += meson.current_build_dir() / t
endforeach
foreach sub, fnames : generated_sources_ac
sub = meson.build_root() / sub
foreach fname : fnames
potentially_conflicting_files += sub / fname
endforeach
endforeach
# find and report conflicting files
foreach build_path : potentially_conflicting_files
build_path = host_system == 'windows' ? fs.as_posix(build_path) : build_path
# str.replace is in 0.56
src_path = meson.current_source_dir() / build_path.split(meson.current_build_dir() / '')[1]
if fs.exists(src_path) or fs.is_symlink(src_path)
conflicting_files += src_path
endif
endforeach
# XXX: Perhaps we should generate a file that would clean these up? The list
# can be long.
if conflicting_files.length() > 0
errmsg_cleanup = '''
Conflicting files in source directory:
@0@
The conflicting files need to be removed, either by removing the files listed
above, or by running configure and then make maintainer-clean.
'''
errmsg_cleanup = errmsg_cleanup.format(' '.join(conflicting_files))
error(errmsg_nonclean_base.format(errmsg_cleanup))
endif
###############################################################
# Test prep
###############################################################
# DESTDIR for the installation we'll run tests in
test_install_destdir = meson.build_root() / 'tmp_install/'
# DESTDIR + prefix appropriately munged
if build_system != 'windows'
# On unixoid systems this is trivial, we just prepend the destdir
assert(dir_prefix.startswith('/')) # enforced by meson
test_install_location = '@0@@1@'.format(test_install_destdir, dir_prefix)
else
# drives, drive-relative paths, etc make this complicated on windows, call
# meson's logic for it
command = [
meson_bin, meson_args, 'runpython', '-c',
'import sys; from mesonbuild.scripts import destdir_join; print(destdir_join(sys.argv[4], sys.argv[5]))',
test_install_destdir, dir_prefix]
test_install_location = run_command(command, check: true).stdout().strip()
endif
meson_install_args = meson_args + ['install'] + {
'meson': ['--quiet', '--only-changed', '--no-rebuild'],
'muon': []
}[meson_impl]
test('tmp_install',
meson_bin, args: meson_install_args ,
env: {'DESTDIR':test_install_destdir},
priority: 100,
timeout: 300,
is_parallel: false,
suite: ['setup'])
test_result_dir = meson.build_root() / 'testrun'
# XXX: pg_regress doesn't assign unique ports on windows. To avoid the
# inevitable conflicts from running tests in parallel, hackishly assign
# different ports for different tests.
testport = 40000
test_env = environment()
temp_install_bindir = test_install_location / get_option('bindir')
test_env.set('PG_REGRESS', pg_regress.full_path())
test_env.set('REGRESS_SHLIB', regress_module.full_path())
# Test suites that are not safe by default but can be run if selected
# by the user via the whitespace-separated list in variable PG_TEST_EXTRA.
# Export PG_TEST_EXTRA so it can be checked in individual tap tests.
test_env.set('PG_TEST_EXTRA', get_option('PG_TEST_EXTRA'))
# Add the temporary installation to the library search path on platforms where
# that works (everything but windows, basically). On windows everything
# library-like gets installed into bindir, solving that issue.
if library_path_var != ''
test_env.prepend(library_path_var, test_install_location / get_option('libdir'))
endif
###############################################################
# Test Generation
###############################################################
testwrap = files('src/tools/testwrap')
foreach test_dir : tests
testwrap_base = [
testwrap,
'--basedir', meson.build_root(),
'--srcdir', test_dir['sd'],
'--testgroup', test_dir['name'],
]
foreach kind, v : test_dir
if kind in ['sd', 'bd', 'name']
continue
endif
t = test_dir[kind]
if kind in ['regress', 'isolation', 'ecpg']
if kind == 'regress'
runner = pg_regress
elif kind == 'isolation'
runner = pg_isolation_regress
elif kind == 'ecpg'
runner = pg_regress_ecpg
endif
test_output = test_result_dir / test_dir['name'] / kind
test_command = [
runner.full_path(),
'--inputdir', t.get('inputdir', test_dir['sd']),
'--expecteddir', t.get('expecteddir', test_dir['sd']),
'--outputdir', test_output,
'--temp-instance', test_output / 'tmp_check',
'--bindir', '',
'--dlpath', test_dir['bd'],
'--max-concurrent-tests=20',
'--port', testport.to_string(),
] + t.get('regress_args', [])
if t.has_key('schedule')
test_command += ['--schedule', t['schedule'],]
endif
if kind == 'isolation'
test_command += t.get('specs', [])
else
test_command += t.get('sql', [])
endif
env = test_env
env.prepend('PATH', temp_install_bindir, test_dir['bd'])
test_kwargs = {
'suite': [test_dir['name']],
'priority': 10,
'timeout': 1000,
'depends': test_deps + t.get('deps', []),
'env': env,
} + t.get('test_kwargs', {})
test(test_dir['name'] / kind,
python,
args: testwrap_base + [
'--testname', kind,
'--', test_command,
],
kwargs: test_kwargs,
)
testport += 1
elif kind == 'tap'
if not tap_tests_enabled
continue
endif
test_command = [
perl.path(),
'-I', meson.source_root() / 'src/test/perl',
'-I', test_dir['sd'],
]
# Add temporary install, the build directory for non-installed binaries and
# also test/ for non-installed test binaries built separately.
env = test_env
env.prepend('PATH', temp_install_bindir, test_dir['bd'], test_dir['bd'] / 'test')
foreach name, value : t.get('env', {})
env.set(name, value)
endforeach
test_kwargs = {
'protocol': 'tap',
'suite': [test_dir['name']],
'timeout': 1000,
'depends': test_deps + t.get('deps', []),
'env': env,
} + t.get('test_kwargs', {})
foreach onetap : t['tests']
# Make tap test names prettier, remove t/ and .pl
onetap_p = onetap
if onetap_p.startswith('t/')
onetap_p = onetap.split('t/')[1]
endif
if onetap_p.endswith('.pl')
onetap_p = fs.stem(onetap_p)
endif
test(test_dir['name'] / onetap_p,
python,
kwargs: test_kwargs,
args: testwrap_base + [
'--testname', onetap_p,
'--', test_command,
test_dir['sd'] / onetap,
],
)
endforeach
else
error('unknown kind @0@ of test in @1@'.format(kind, test_dir['sd']))
endif
endforeach # kinds of tests
endforeach # directories with tests
###############################################################
# Pseudo targets
###############################################################
alias_target('backend', backend_targets)
alias_target('bin', bin_targets + [libpq_st])
alias_target('pl', pl_targets)
alias_target('contrib', contrib_targets)
alias_target('testprep', testprep_targets)
###############################################################
# The End, The End, My Friend
###############################################################
if meson.version().version_compare('>=0.57')
summary(
{
'data block size': cdata.get('BLCKSZ'),
'WAL block size': cdata.get('XLOG_BLCKSZ') / 1024,
'segment size': cdata.get('RELSEG_SIZE') / 131072,
},
section: 'Data layout',
)
summary(
{
'host system': '@0@ @1@'.format(host_system, host_cpu),
'build system': '@0@ @1@'.format(build_machine.system(),
build_machine.cpu_family()),
},
section: 'System',
)
summary(
{
'linker': '@0@'.format(cc.get_linker_id()),
'C compiler': '@0@ @1@'.format(cc.get_id(), cc.version()),
},
section: 'Compiler',
)
summary(
{
'CPP FLAGS': ' '.join(cppflags),
'C FLAGS, functional': ' '.join(cflags),
'C FLAGS, warnings': ' '.join(cflags_warn),
'C FLAGS, modules': ' '.join(cflags_mod),
'C FLAGS, user specified': ' '.join(get_option('c_args')),
'LD FLAGS': ' '.join(ldflags + get_option('c_link_args')),
},
section: 'Compiler Flags',
)
if llvm.found()
summary(
{
'C++ compiler': '@0@ @1@'.format(cpp.get_id(), cpp.version()),
},
section: 'Compiler',
)
summary(
{
'C++ FLAGS, functional': ' '.join(cxxflags),
'C++ FLAGS, warnings': ' '.join(cxxflags_warn),
'C++ FLAGS, user specified': ' '.join(get_option('cpp_args')),
},
section: 'Compiler Flags',
)
endif
summary(
{
'bison': '@0@ @1@'.format(bison.full_path(), bison_version),
'dtrace': dtrace,
},
section: 'Programs',
)
summary(
{
'bonjour': bonjour,
'bsd_auth': bsd_auth,
'gss': gssapi,
'icu': icu,
'ldap': ldap,
'libxml': libxml,
'libxslt': libxslt,
'llvm': llvm,
'lz4': lz4,
'nls': libintl,
'pam': pam,
'plperl': perl_dep,
'plpython': python3_dep,
'pltcl': tcl_dep,
'readline': readline,
'selinux': selinux,
'ssl': ssl,
'systemd': systemd,
'uuid': uuid,
'zlib': zlib,
'zstd': zstd,
},
section: 'External libraries',
)
endif