postgresql/INSTALL

1643 lines
70 KiB
Plaintext

PostgreSQL Installation Guide
by The PostgreSQL Development Team
PostgreSQL is © 1998-9 by the Postgres Global Development Group.
Table of Contents
Summary
1. Introduction
2. Ports
Currently Supported Platforms
Unsupported Platforms
3. Installation
Requirements to Run Postgres
Installation Procedure
Playing with Postgres
The Next Step
Porting Notes
4. Configuration Options
Parameters for Configuration (configure)
Parameters for Building (make)
Locale Support
What are the Benefits?
What are the Drawbacks?
Kerberos Authentication
Availability
Installation
Operation
5. Release Notes
Release 6.5
Migration to v6.5
Multi-Version Concurrency Control
Detailed Change List
Summary
Postgres, developed originally in the UC Berkeley
Computer Science Department, pioneered many of the
object-relational concepts now becoming available in
some commercial databases. It provides SQL92/SQL3
language support, transaction integrity, and type
extensibility. PostgreSQL is a public-domain, open
source descendant of this original Berkeley code.
Chapter 1. Introduction
This installation procedure makes some assumptions
about the desired configuration and runtime
environment for your system. This may be adequate for
many installations, and is almost certainly adequate
for a first installation. But you may want to do an
initial installation up to the point of unpacking the
source tree and installing documentation, and then
print or browse the Administrator's Guide.
Chapter 2. Ports
This manual describes version 6.5 of Postgres. The
Postgres developer community has compiled and tested
Postgres on a number of platforms. Check the web site
(http://www.postgresql.org/docs/admin/ports.htm) for
the latest information.
Currently Supported Platforms
At the time of publication, the following platforms
have been tested:
Table 2-1. Supported Platforms
OS Processor Version Reported Remarks
AIX 4.3.2 RS6000 v6.5 1999-05-26 (Andreas Zeugswetter
(mailto:Andreas.Zeugswetter@telecom.at))
BSDI x86 v6.5 1999-05-25 (Bruce Momjian
(mailto:maillist@candle.pha.pa.us)
FreeBSD x86 v6.5 1999-05-25 (Tatsuo Ishii
2.2.x-4.0 (mailto:t-ishii@sra.co.jp),
Marc Fournier
(mailto:scrappy@hub.org))
DGUX m88k v6.3 1998-03-01 v6.4 probably OK.
5.4R4.11 Needs new maintainer.
(Brian E Gallew
(mailto:geek+@cmu.edu))
Digital Alpha v6.4 1998-10-29 Minor patchable problems
Unix 4.0 (Pedro J. Lobo
(mailto:pjlobo@euitt.upm.es))
HPUX PA-RISC v6.4 1998-10-25 Both 9.0x and 10.20
(Tom Lane (mailto:tgl@sss.pgh.pa.us),
Stan Brown (mailto:stanb@awod.com))
IRIX 6.5 MIPS v6.4 1998-12-29 IRIX 5.x is different
(Mark Dalphin (mdalphin@amgen.com))
linux Alpha v6.3.2 1998-04-16 Mostly successful. Needs
2.0.x work for v6.4.
(Ryan Kirkpatrick
(mailto:rkirkpat@nag.cs.colorado.edu))
linux x86 v6.4 1998-10-27 (Thomas Lockhart
2.0.x/libc5 (mailto:lockhart@alumni.caltech.edu))
linux x86 v6.4 1999-05-24 (Thomas Lockhart
2.0.x/glibc2 (mailto:lockhart@alumni.caltech.edu))
linux MIPS v6.4 1998-12-16 Cobalt Qube (Tatsuo Ishii
2.0.x (mailto:t-ishii@sra.co.jp))
linux Sparc v6.4 1998-10-25 (Tom Szybist
2.0.x (mailto:szybist@boxhill.com))
linuxPPC PPC603e v6.4 1998-10-26 Powerbook 2400c
2.1.24 (Tatsuo Ishii
(mailto:t-ishii@sra.co.jp))
mklinux PPC750 v6.4 1998-09-16 PowerMac 7600
DR3 (Tatsuo Ishii
(mailto:t-ishii@sra.co.jp))
NetBSD arm32 v6.5 1999-04-14 (Andrew McMurry
(mailto:a.mcmurry1@physics.oxford.ac.uk))
NetBSD/i3- x86 v6.4 1998-10-25 (Brook Milligan
86 1.3.2 (mailto:brook@trillium.NMSU.Edu))
NetBSD m68k v6.4.2 1998-12-28 Mac SE/30 (Mr. Mutsuki
Nakajima, Tatsuo Ishii
(mailto:t-ishii@sra.co.jp))
NetBSD- NS32532 v6.4 1998-10-27 small problems
current in date/time math (Jon Buller
(mailto:jonb@metronet.com))
NetBSD/sp- Sparc v6.4 1998-10-27 (Tom I Helbekkmo
arc 1.3H (mailto:tih@hamartun.priv.no))
NetBSD 1.3 VAX v6.3 1998-03-01 (Tom I Helbekkmo
(mailto:tih@hamartun.priv.no))
SCO x86 v6.5 1999-05-25 (Andrew Merrill
OpenServer 5 (mailto:andrew@compclass.com))
SCO x86 v6.5 1999-05-25 (Andrew Merrill
UnixWare 7 (mailto:andrew@compclass.com))
Solaris x86 v6.4 1998-10-28 (Marc Fournier
(mailto:scrappy@hub.org))
Solaris Sparc v6.4 1998-10-28 (Tom Szybist
2.6-2.7 (mailto:szybist@boxhill.com),
Frank Ridderbusch
(mailto:ridderbusch.pad@sni.de))
SunOS Sparc v6.3 1998-03-01 Patches submitted
4.1.4 (Tatsuo Ishii
(mailto:t-ishii@sra.co.jp))
SVR4 MIPS v6.4 1998-10-28 No 64-bit int compiler
support (Frank Ridderbusch
(mailto:ridderbusch.pad@sni.de))
Windows x86 v6.4 1999-01-06 Client-side libraries
or ODBC/JDBC. No server yet.
(Magnus Hagander
(mha@sollentuna.net)
Windows NT x86 v6.5 1999-05-26 Working with the Cygwin
library. (Daniel Horak
(mailto:Dan.Horak@email.cz))
Platforms listed for v6.3.x and v6.4.x should also
work with v6.5, but we did not receive explicit
confirmation of such at the time this list was
compiled.
Note: For Windows NT, the server-side port of
Postgres has recently been accomplished. The
Cygnus library is required to compile it.
Unsupported Platforms
There are a few platforms which have been attempted
and which have been reported to not work with the
standard distribution. Others listed here do not
provide sufficient library support for an attempt.
Table 2-2. Possibly Incompatible Platforms
OS Processor Version Reported Remarks
MacOS all v6.3 1998-03-01 Not library compatible;
use ODBC/JDBC
NextStep x86 v6.x 1998-03-01 Client-only support;
v1.0.9 worked with patches
(David Wetzel
(mailto:dave@turbocat.de))
SVR4 4.4 m88k v6.2.1 1998-03-01 Confirmed
with patching;
v6.4.x will need TAS
spinlock code (Doug
Winterburn
(mailto:dlw@seavme.xroads.com))
Ultrix MIPS,VAX? v6.x 1998-03-01 No recent reports;
obsolete?
Chapter 3. Installation
Complete installation instructions for Postgres
v6.5.
Before installing Postgres, you may wish to visit
www.postgresql.org (http://www.postgresql.org) for up
to date information, patches, etc.
These installation instructions assume:
o Commands are Unix-compatible. See note below.
o Defaults are used except where noted.
o User postgres is the Postgres superuser.
o The source path is /usr/src/pgsql (other paths are
possible).
o The runtime path is /usr/local/pgsql (other paths
are possible).
Commands were tested on RedHat Linux version 5.2
using the tcsh shell. Except where noted, they will
probably work on most systems. Commands like ps and
tar may vary wildly between platforms on what options
you should use. Use common sense before typing in
these commands.
Our Makefiles require GNU make (called ?gmake? in this
document). They will not work with non-GNU make
programs. If you have GNU make installed under the
name ?make? instead of ?gmake?, then you will use the
command make instead. That's OK, but you need to have
the GNU form of make to succeed with an installation.
Requirements to Run Postgres
Up to date information on supported platforms is at
http://www.postgresql.org/docs/admin/install.htm
(http://www.postgresql.org/docs/admin/install.htm).
In general, most Unix-compatible platforms with
modern libraries should be able to run Postgres.
Although the minimum required memory for running
Postgres is as little as 8MB, there are noticable
improvements in runtimes for the regression tests
when expanding memory up to 96MB on a relatively fast
dual-processor system running X-Windows. The rule is
you can never have too much memory.
Check that you have sufficient disk space. You will
need about 30 Mbytes for /usr/src/pgsql, about 5
Mbytes for /usr/local/pgsql (excluding your database)
and 1 Mbyte for an empty database. The database will
temporarily grow to about 20 Mbytes during the
regression tests. You will also need about 3 Mbytes
for the distribution tar file.
We therefore recommend that during installation and
testing you have well over 20 Mbytes free under
/usr/local and another 25 Mbytes free on the disk
partition containing your database. Once you delete
the source files, tar file and regression database,
you will need 2 Mbytes for /usr/local/pgsql, 1 Mbyte
for the empty database, plus about five times the
space you would require to store your database data
in a flat file.
To check for disk space, use
$ df -k
Installation Procedure
Postgres Installation
For a fresh install or upgrading from previous
releases of Postgres:
1. Read any last minute information and platform
specific porting notes. There are some platform
specific notes at the end of this file for
Ultrix4.x, Linux, BSD/OS and NeXT. There are other
files in directory /usr/src/pgsql/doc, including
files FAQ-Irix and FAQ-Linux. Also look in
directory ftp://ftp.postgresql.org/pub. If there
is a file called INSTALL in this directory then
this file will contain the latest installation
information.
Please note that a "tested" platform in the list
given earlier simply means that someone went to
the effort at some point of making sure that a
Postgres distribution would compile and run on
this platform without modifying the code. Since
the current developers will not have access to all
of these platforms, some of them may not compile
cleanly and pass the regression tests in the
current release due to minor problems. Any such
known problems and their solutions will be posted
in ftp://ftp.postgresql.org/pub/INSTALL.
2. Create the Postgres superuser account (postgres is
commonly used) if it does not already exist.
The owner of the Postgres files can be any
unprivileged user account. It must not be root,
bin, or any other account with special access
rights, as that would create a security risk.
3. Log in to the Postgres superuser account. Most of
the remaining steps in the installation will
happen in this account.
4. Ftp file
ftp://ftp.postgresql.org/pub/postgresql-v6.5.tar.-
gz
(ftp://ftp.postgresql.org/pub/postgresql-v6.5.tar-
.gz) from the Internet. Store it in your home
directory.
5. Some platforms use flex. If your system uses flex
then make sure you have a good version. To check,
type
$ flex --version
If the flex command is not found then you
probably do not need it. If the version is 2.5.2
or 2.5.4 or greater then you are okay. If it is
2.5.3 or before 2.5.2 then you will have to
upgrade flex. You may get it at
ftp://prep.ai.mit.edu/pub/gnu/flex-2.5.4.tar.gz.
If you need flex and don't have it or have the
wrong version, then you will be told so when you
attempt to compile the program. Feel free to skip
this step if you aren't sure you need it. If you
do need it then you will be told to
install/upgrade flex when you try to compile
Postgres.
You may want to do the entire flex installation
from the root account, though that is not
absolutely necessary. Assuming that you want the
installation to place files in the usual default
areas, type the following:
$ su -
$ cd /usr/local/src
ftp prep.ai.mit.edu
ftp> cd /pub/gnu/
ftp> binary
ftp> get flex-2.5.4.tar.gz
ftp> quit
$ gunzip -c flex-2.5.4.tar.gz | tar xvf -
$ cd flex-2.5.4
$ configure --prefix=/usr
$ gmake
$ gmake check
# You must be root when typing the next line:
$ gmake install
$ cd /usr/local/src
$ rm -rf flex-2.5.4
This will update files /usr/man/man1/flex.1,
/usr/bin/flex, /usr/lib/libfl.a,
/usr/include/FlexLexer.h and will add a link
/usr/bin/flex++ which points to flex.
6. If you are not upgrading an existing system then
skip to step 9. If you are upgrading an existing
system then back up your database. For alpha- and
beta-level releases, the database format is liable
to change, often every few weeks, with no notice
besides a quick comment in the HACKERS mailing
list. Full releases always require a dump/reload
from previous releases. It is therefore a bad idea
to skip this step.
Tip: Do not use the pg_dumpall script from v6.0
or everything will be owned by the Postgres
super user.
To dump your fairly recent post-v6.0 database
installation, type
$ pg_dumpall > db.out
To use the latest pg_dumpall script on your
existing older database before upgrading Postgres,
pull the most recent version of pg_dumpall from
the new distribution:
$ cd
$ gunzip -c postgresql-v6.5.tar.gz \
| tar xvf - src/bin/pg_dump/pg_dumpall
$ chmod a+x src/bin/pg_dump/pg_dumpall
$ src/bin/pg_dump/pg_dumpall > db.out
$ rm -rf src
If you wish to preserve object id's (oids), then
use the -o option when running pg_dumpall.
However, unless you have a special reason for
doing this (such as using OIDs as keys in tables),
don't do it.
If the pg_dumpall command seems to take a long
time and you think it might have died, then, from
another terminal, type
$ ls -l db.out
several times to see if the size of the file is
growing.
Please note that if you are upgrading from a
version prior to Postgres95 v1.09 then you must
back up your database, install Postgres95 v1.09,
restore your database, then back it up again. You
should also read the release notes which should
cover any release-specific issues.
Caution
You must make sure that your database is not
updated in the middle of your backup. If
necessary, bring down postmaster, edit the
permissions in file
/usr/local/pgsql/data/pg_hba.conf to allow
only you on, then bring postmaster back up.
7. If you are upgrading an existing system then kill
the postmaster. Type
$ ps -ax | grep postmaster
This should list the process numbers for a number
of processes. Type the following line, with pid
replaced by the process id for process postmaster.
(Do not use the id for process "grep postmaster".)
Type
$ kill pid
to actually stop the process.
Tip: On systems which have Postgres started at
boot time, there is probably a startup file
which will accomplish the same thing. For
example, on my Linux system I can type
$ /etc/rc.d/init.d/postgres.init stop
to halt Postgres.
8. If you are upgrading an existing system then move
the old directories out of the way. If you are
short of disk space then you may have to back up
and delete the directories instead. If you do
this, save the old database in the
/usr/local/pgsql/data directory tree. At a
minimum, save file
/usr/local/pgsql/data/pg_hba.conf.
Type the following:
$ su -
$ cd /usr/src
$ mv pgsql pgsql_6_0
$ cd /usr/local
$ mv pgsql pgsql_6_0
$ exit
If you are not using /usr/local/pgsql/data as
your data directory (check to see if environment
variable PGDATA is set to something else) then you
will also want to move this directory in the same
manner.
9. Make new source and install directories. The
actual paths can be different for your
installation but you must be consistent throughout
this procedure.
Note: There are two places in this installation
procedure where you will have an opportunity to
specify installation locations for programs,
libraries, documentation, and other files.
Usually it is sufficient to specify these at the
gmake install stage of installation.
Type
$ su
$ cd /usr/src
$ mkdir pgsql
$ chown postgres:postgres pgsql
$ cd /usr/local
$ mkdir pgsql
$ chown postgres:postgres pgsql
$ exit
10. Unzip and untar the new source file. Type
$ cd /usr/src/pgsql
$ gunzip -c ~/postgresql-v6.5.tar.gz | tar xvf -
11. Configure the source code for your system. It
is this step at which you can specify your actual
installation path for the build process (see the
--prefix option below). Type
$ cd /usr/src/pgsql/src
$ ./configure [ options ]
a. Among other chores, the configure script
selects a system-specific "template" file
from the files provided in the template
subdirectory. If it cannot guess which one to
use for your system, it will say so and exit.
In that case you'll need to figure out which
one to use and run configure again, this time
giving the --with-template=TEMPLATE option to
make the right file be chosen.
Please Report Problems: If your system is not
automatically recognized by configure and
you have to do this, please send email to
scrappy@hub.org (mailto:scrappy@hub.org)
with the output of the program
./config.guess. Indicate what the template
file should be.
b. Choose configuration options. Check
Configuration Options for details. However,
for a plain-vanilla first installation with
no extra options like multi-byte character
support or locale collation support it may be
adequate to have chosen the installation
areas and to run configure without extra
options specified. The configure script
accepts many additional options that you can
use if you don't like the default
configuration. To see them all, type
./configure --help
Some of the more commonly used ones are:
--prefix=BASEDIR Selects a different
base directory for the
installation of the
Postgres configuration.
The default is
/usr/local/pgsql.
--with-template=TEMPLATE
Use template file
TEMPLATE - the template
files are assumed
to be in the directory
src/template, so
look there for proper values.
--with-tcl Build interface
libraries and programs requiring
Tcl/Tk, including
libpgtcl, pgtclsh, and pgtksh.
--with-perl Build the Perl
interface library.
--with-odbc Build the ODBC
driver package.
--enable-hba Enables Host Based
Authentication (DEFAULT)
--disable-hba Disables Host Based
Authentication
--enable-locale Enables USE_LOCALE
--enable-cassert Enables
ASSERT_CHECKING
--with-CC=compiler
Use a specific C
compiler that the configure
script cannot find.
--with-CXX=compiler
--without-CXX
Use a specific C++
compiler that the configure
script cannot find,
or exclude C++ compilation
altogether. (This
only affects libpq++ at
present.)
c. Here is the configure script used on a Sparc
Solaris 2.5 system with /opt/postgres
specified as the installation base directory:
$ ./configure --prefix=/opt/postgres \
--with-template=sparc_solaris-gcc
--with-pgport=5432 \
--enable-hba --disable-locale
Tip: Of course, you may type these three
lines all on the same line.
12. Install the man and HTML documentation. Type
$ cd /usr/src/pgsql/doc
$ gmake install
The documentation is also available in Postscript
format. Look for files ending with .ps.gz in the
same directory.
13. Compile the program. Type
$ cd /usr/src/pgsql/src
$ gmake all >& make.log &
$ tail -f make.log
The last line displayed will hopefully be
All of PostgreSQL is successfully made. Ready to
install.
Remember, ?gmake? may be called ?make? on your system.
At this point, or earlier if you wish, type
control-C to get out of tail. (If you have
problems later on you may wish to examine file
make.log for warning and error messages.)
Note: You will probably find a number of warning
messages in make.log. Unless you have problems
later on, these messages may be safely ignored.
If the compiler fails with a message stating that
the flex command cannot be found then install flex
as described earlier. Next, change directory back
to this directory, type
$ gmake clean
then recompile again.
Compiler options, such as optimization and
debugging, may be specified on the command line
using the COPT variable. For example, typing
$ gmake COPT="-g" all >& make.log &
would invoke your compiler's -g option in all
steps of the build. See src/Makefile.global.in for
further details.
14. Install the program. Type
$ cd /usr/src/pgsql/src
$ gmake install >& make.install.log &
$ tail -f make.install.log
The last line displayed will be
gmake[1]: Leaving directory
`/usr/src/pgsql/src/man'
At this point, or earlier if you wish, type
control-C to get out of tail. Remember, ?gmake? may
be called ?make? on your system.
15. If necessary, tell your system how to find
the new shared libraries. You can do one of the
following, preferably the first:
a. As root, edit file /etc/ld.so.conf. Add a
line
/usr/local/pgsql/lib
to the file. Then run command /sbin/ldconfig.
b. In a bash shell, type
export
LD_LIBRARY_PATH=/usr/local/pgsql/lib
c. In a csh shell, type
setenv LD_LIBRARY_PATH
/usr/local/pgsql/lib
Please note that the above commands may vary
wildly for different operating systems. Check the
platform specific notes, such as those for
Ultrix4.x or and for non-ELF Linux.
If, when you create the database, you get the
message
pg_id: can't load library 'libpq.so'
then the above step was necessary. Simply do this
step, then try to create the database again.
16. If you used the --with-perl option to
configure, check the install log to see whether
the Perl module was actually installed. If you've
followed our advice to make the Postgres files be
owned by an unprivileged userid, then the Perl
module won't have been installed, for lack of
write privileges on the Perl library directories.
You can complete its installation, either now or
later, by becoming the user that does own the Perl
library (often root) (via su) and doing
$ cd /usr/src/pgsql/src/interfaces/perl5
$ gmake install
17. If it has not already been done, then prepare
account postgres for using Postgres. Any account
that will use Postgres must be similarly prepared.
There are several ways to influence the runtime
environment of the Postgres server. Refer to the
Administrator's Guide for more information.
Note: The following instructions are for a
bash/sh shell. Adapt accordingly for other
shells.
a. Add the following lines to your login
environment: shell, ~/.bash_profile:
PATH=$PATH:/usr/local/pgsql/bin
MANPATH=$MANPATH:/usr/local/pgsql/man
PGLIB=/usr/local/pgsql/lib
PGDATA=/usr/local/pgsql/data
export PATH MANPATH PGLIB PGDATA
b. Several regression tests could fail if the
user's locale collation scheme is different
from that of standard C locale.
If you configure and compile Postgres with
the --enable-locale option then set locale
environment to C (or unset all LC_*
variables) by putting these additional lines
to your login environment before starting
postmaster:
LC_COLLATE=C
LC_CTYPE=C
LC_COLLATE=C
export LC_COLLATE LC_CTYPE LC_COLLATE
c. Make sure that you have defined these
variables before continuing with the
remaining steps. The easiest way to do this
is to type:
$ source ~/.bash_profile
18. Create the database installation from your
Postgres superuser account (typically account
postgres). Do not do the following as root! This
would be a major security hole. Type
$ initdb
19. Set up permissions to access the database
system. Do this by editing file
/usr/local/pgsql/data/pg_hba.conf. The
instructions are included in the file. (If your
database is not located in the default location,
i.e. if PGDATA is set to point elsewhere, then the
location of this file will change accordingly.)
This file should be made read only again once you
are finished. If you are upgrading from v6.0 or
later you can copy file pg_hba.conf from your old
database on top of the one in your new database,
rather than redoing the file from scratch.
20. Briefly test that the backend will start and
run by running it from the command line.
a. Start the postmaster daemon running in the
background by typing
$ cd
$ postmaster -i
b. Create a database by typing
$ createdb
c. Connect to the new database:
$ psql
d. And run a sample query:
postgres=> SELECT datetime 'now';
e. Exit psql:
postgres=> \q
f. Remove the test database (unless you will
want to use it later for other tests):
$ destroydb
21. Run postmaster in the background from your
Postgres superuser account (typically account
postgres). Do not run postmaster from the root
account!
Usually, you will want to modify your computer so
that it will automatically start postmaster
whenever it boots. It is not required; the
Postgres server can be run successfully from
non-privileged accounts without root intervention.
Here are some suggestions on how to do this,
contributed by various users.
Whatever you do, postmaster must be run by the
Postgres superuser (postgres?) and not by root.
This is why all of the examples below start by
switching user (su) to postgres. These commands
also take into account the fact that environment
variables like PATH and PGDATA may not be set
properly. The examples are as follows. Use them
with extreme caution.
o If you are installing from a non-privileged
account and have no root access, then start the
postmaster and send it to the background:
$ cd
$ nohup postmaster > regress.log 2>&1 &
o Edit file rc.local on NetBSD or file rc2.d on
SPARC Solaris 2.5.1 to contain the following
single line:
su postgres -c "/usr/local/pgsql/bin/postmaster
-S -D /usr/local/pgsql/data"
o In FreeBSD 2.2-RELEASE edit
/usr/local/etc/rc.d/pgsql.sh to contain the
following lines and make it chmod 755 and chown
root:bin.
#!/bin/sh
[ -x /usr/local/pgsql/bin/postmaster ] && {
su -l pgsql -c 'exec
/usr/local/pgsql/bin/postmaster
-D/usr/local/pgsql/data
-S -o -F > /usr/local/pgsql/errlog' &
echo -n ' pgsql'
}
You may put the line breaks as shown above. The
shell is smart enough to keep parsing beyond
end-of-line if there is an expression unfinished.
The exec saves one layer of shell under the
postmaster process so the parent is init.
o In RedHat Linux add a file
/etc/rc.d/init.d/postgres.init which is based on
the example in contrib/linux/. Then make a
softlink to this file from
/etc/rc.d/rc5.d/S98postgres.init.
o In RedHat Linux edit file /etc/inittab to add the
following as a single line:
pg:2345:respawn:/bin/su - postgres -c
"/usr/local/pgsql/bin/postmaster
-D/usr/local/pgsql/data
>> /usr/local/pgsql/server.log 2>&1
</dev/null"
(The author of this example says this example
will revive the postmaster if it dies, but he
doesn't know if there are other side effects.)
22. Run the regression tests. The file
/usr/src/pgsql/src/test/regress/README has
detailed instructions for running and interpreting
the regression tests. A short version follows
here:
a. Type
$ cd /usr/src/pgsql/src/test/regress
$ gmake clean
$ gmake all runtest
You do not need to type gmake clean if this
is the first time you are running the tests.
You should get on the screen (and also
written to file ./regress.out) a series of
statements stating which tests passed and
which tests failed. Please note that it can
be normal for some tests to "fail" on some
platforms. The script says a test has failed
if there is any difference at all between the
actual output of the test and the expected
output. Thus, tests may "fail" due to minor
differences in wording of error messages,
small differences in floating-point roundoff,
etc, between your system and the regression
test reference platform. "Failures" of this
type do not indicate a problem with Postgres.
The file ./regression.diffs contains the
textual differences between the actual test
output on your machine and the "expected"
output (which is simply what the reference
system produced). You should carefully
examine each difference listed to see whether
it appears to be a significant issue.
For example,
o For a i686/Linux-ELF platform, no tests
failed since this is the v6.5 regression
testing reference platform.
Even if a test result clearly indicates a
real failure, it may be a localized problem
that will not affect you. An example is that
the int8 test will fail, producing obviously
incorrect output, if your machine and C
compiler do not provide a 64-bit integer data
type (or if they do but configure didn't
discover it). This is not something to worry
about unless you need to store 64-bit
integers.
Conclusion? If you do see failures, try to
understand the nature of the differences and
then decide if those differences will affect
your intended use of Postgres. The regression
tests are a helpful tool, but they may
require some study to be useful.
After running the regression tests, type
$ destroydb regression
$ cd /usr/src/pgsql/src/test/regress
$ gmake clean
to recover the disk space used for the
tests. (You may want to save the
regression.diffs file in another place before
doing this.)
23. If you haven't already done so, this would be
a good time to modify your computer to do regular
maintainence. The following should be done at
regular intervals:
Minimal Backup Procedure
1. Run the SQL command VACUUM. This will clean
up your database.
2. Back up your system. (You should probably
keep the last few backups on hand.) Preferably,
no one else should be using the system at the
time.
Ideally, the above tasks should be done by a
shell script that is run nightly or weekly by
cron. Look at the man page for crontab for a
starting point on how to do this. (If you do it,
please e-mail us a copy of your shell script. We
would like to set up our own systems to do this
too.)
24. If you are upgrading an existing system then
reinstall your old database. Type
$ cd
$ psql -e template1 < db.out
If your pre-v6.2 database uses either path or
polygon geometric data types, then you will need
to upgrade any columns containing those types. To
do so, type (from within psql)
UPDATE FirstTable SET PathCol =
UpgradePath(PathCol);
UPDATE SecondTable SET PathCol =
UpgradePath(PathCol);
...
VACUUM;
UpgradePath() checks to see that a path value is
consistant with the old syntax, and will not
update a column which fails that examination.
UpgradePoly() cannot verify that a polygon is in
fact from an old syntax, but RevertPoly() is
provided to reverse the effects of a mis-applied
upgrade.
25. If you are a new user, you may wish to play
with Postgres as described below.
26. Clean up after yourself. Type
$ rm -rf /usr/src/pgsql_6_5
$ rm -rf /usr/local/pgsql_6_5
# Also delete old database directory tree if it is
not in
# /usr/local/pgsql_6_5/data
$ rm ~/postgresql-v6.5.tar.gz
27. You will probably want to print out the
documentation. If you have a Postscript printer,
or have your machine already set up to accept
Postscript files using a print filter, then to
print the User's Guide simply type
$ cd /usr/local/pgsql/doc
$ gunzip user.ps.tz | lpr
Here is how you might do it if you have
Ghostscript on your system and are writing to a
laserjet printer.
$ alias gshp='gs -sDEVICE=laserjet -r300
-dNOPAUSE'
$ export
GS_LIB=/usr/share/ghostscript:/usr/share/ghostscr-
ipt/fonts
$ gunzip user.ps.gz
$ gshp -sOUTPUTFILE=user.hp user.ps
$ gzip user.ps
$ lpr -l -s -r manpage.hp
28. The Postgres team wants to keep Postgres
working on all of the supported platforms. We
therefore ask you to let us know if you did or did
not get Postgres to work on you system. Please
send a mail message to pgsql-ports@postgresql.org
(mailto:pgsql-ports@postgresql.org) telling us the
following:
o The version of Postgres (v6.5, 6.4.2, beta
981014, etc.).
o Your operating system (i.e. RedHat v5.1 Linux
v2.0.34).
o Your hardware (SPARC, i486, etc.).
o Did you compile, install and run the regression
tests cleanly? If not, what source code did you
change (i.e. patches you applied, changes you
made, etc.), what tests failed, etc. It is normal
to get many warning when you compile. You do not
need to report these.
29. Now create, access and manipulate databases
as desired. Write client programs to access the
database server. In other words, enjoy!
Playing with Postgres
After Postgres is installed, a database system is
created, a postmaster daemon is running, and the
regression tests have passed, you'll want to see
Postgres do something. That's easy. Invoke the
interactive interface to Postgres, psql:
% psql template1
(psql has to open a particular database, but at this
point the only one that exists is the template1
database, which always exists. We will connect to it
only long enough to create another one and switch to
it.)
The response from psql is:
Welcome to the POSTGRESQL interactive sql monitor:
Please read the file COPYRIGHT for copyright terms
of POSTGRESQL
type \? for help on slash commands
type \q to quit
type \g or terminate with semicolon to execute
query
You are currently connected to the database:
template1
template1=>
Create the database foo:
template1=> create database foo;
CREATEDB
(Get in the habit of including those SQL semicolons.
Psql won't execute anything until it sees the
semicolon or a "\g" and the semicolon is required to
delimit multiple statements.)
Now connect to the new database:
template1=> \c foo
connecting to new database: foo
("slash" commands aren't SQL, so no semicolon. Use \?
to see all the slash commands.)
And create a table:
foo=> create table bar (i int4, c char(16));
CREATE
Then inspect the new table:
foo=> \d bar
Table = bar
+----------------------------------+-----------------
------------------+-------+
| Field |
Type | Length|
+----------------------------------+-----------------
------------------+-------+
| i | int4
| 4 |
| c | (bp)char
| 16 |
+----------------------------------+-----------------
------------------+-------+
And so on. You get the idea.
The Next Step
Questions? Bugs? Feedback? First, read the files in
directory /usr/src/pgsql/doc/. The FAQ in this
directory may be particularly useful.
If Postgres failed to compile on your computer then
fill out the form in file
/usr/src/pgsql/doc/bug.template and mail it to the
location indicated at the top of the form.
Check on the web site at http://www.postgresql.org
For more information on the various support mailing
lists.
Porting Notes
Check for any platform-specific FAQs in the doc/
directory of the source distribution.
Chapter 4. Configuration Options
Parameters for Configuration (configure)
The full set of parameters available in configure
can be obtained by typing
$ ./configure --help
The following parameters may be of interest to
installers:
Directory and file names:
--prefix=PREFIX install
architecture-independent files in PREFIX
[/usr/local/pgsql]
--bindir=DIR user executables in DIR
[EPREFIX/bin]
--libdir=DIR object code libraries in
DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR
[PREFIX/include]
--mandir=DIR man documentation in DIR
[PREFIX/man]
Features and packages:
--disable-FEATURE do not include FEATURE
(same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as
--with-PACKAGE=no)
--enable and --with options recognized:
--with-template=template
use operating system
template file
see template directory
--with-includes=incdir site header files for
tk/tcl, etc in DIR
--with-libs=incdir also search for libraries
in DIR
--with-libraries=libdir also search for libraries
in DIR
--enable-locale enable locale support
--enable-recode enable cyrillic recode
support
--with-mb=encoding enable multi-byte support
--with-pgport=portnum change default startup port
--with-maxbackends=n set default maximum number of
server processes
--with-tcl build Tcl interfaces and
pgtclsh
--with-tclconfig=tcldir tclConfig.sh and
tkConfig.sh are in DIR
--with-perl build Perl interface
--with-odbc build ODBC driver package
--with-odbcinst=odbcdir change default directory
for odbcinst.ini
--enable-cassert enable assertion checks
(debugging)
--with-CC=compiler use specific C compiler
--with-CXX=compiler use specific C++ compiler
--without-CXX prevent building C++ code
Some systems may have trouble building a specific
feature of Postgres. For example, systems with a
damaged C++ compiler may need to specify
--without-CXX to instruct the build procedure to skip
construction of libpq++.
Parameters for Building (make)
Many installation-related parameters can be set in
the building stage of Postgres installation.
In most cases, these parameters should be placed in
a file, Makefile.custom, intended just for that
purpose. The default distribution does not contain
this optional file, so you will create it using a
text editor of your choice. When upgrading
installations, you can simply copy your old
Makefile.custom to the new installation before doing
the build.
make [ variable=value [,...] ]
A few of the many variables which can be specified
are:
POSTGRESDIR
Top of the installation tree.
BINDIR
Location of applications and utilities.
LIBDIR
Location of object libraries, including shared
libraries.
HEADERDIR
Location of include files.
ODBCINST
Location of installation-wide psqlODBC (ODBC)
configuration file.
There are other optional parameters which are not as
commonly used. Many of those listed below are
appropriate when doing Postgres server code
development.
CFLAGS
Set flags for the C compiler. Should be assigned
with "+=" to retain relevant default parameters.
YFLAGS
Set flags for the yacc/bison parser. -v might be
used to help diagnose problems building a new
parser. Should be assigned with "+=" to retain
relevant default parameters.
USE_TCL
Enable Tcl interface building.
HSTYLE
DocBook HTML style sheets for building the
documentation from scratch. Not used unless you
are developing new documentation from the
DocBook-compatible SGML source documents in
doc/src/sgml/.
PSTYLE
DocBook style sheets for building printed
documentation from scratch. Not used unless you
are developing new documentation from the
DocBook-compatible SGML source documents in
doc/src/sgml/.
Here is an example Makefile.custom for a PentiumPro
Linux system:
# Makefile.custom
# Thomas Lockhart 1998-03-01
POSTGRESDIR= /opt/postgres/current
CFLAGS+= -m486 # -g -O0
USE_TCL= true
TCL_LIB= -ltcl
X_LIBS= -L/usr/X11/lib
TK_LIB= -ltk
# documentation
HSTYLE= /home/tgl/SGML/db118.d/docbook/html
PSTYLE= /home/tgl/SGML/db118.d/docbook/print
Locale Support
Note: Written by Oleg Bartunov. See Oleg's web
page (http://www.sai.msu.su/~megera/postgres/) for
additional information on locale and Russian
language support.
While doing a project for a company in Moscow,
Russia, I encountered the problem that postgresql had
no support of national alphabets. After looking for
possible workarounds I decided to develop support of
locale myself. I'm not a C-programer but already had
some experience with locale programming when I work
with perl (debugging) and glimpse. After several days
of digging through the Postgres source tree I made
very minor corections to
src/backend/utils/adt/varlena.c and
src/backend/main/main.c and got what I needed! I did
support only for LC_CTYPE and LC_COLLATE, but later
LC_MONETARY was added by others. I got many messages
from people about this patch so I decided to send it
to developers and (to my surprise) it was
incorporated into the Postgres distribution.
People often complain that locale doesn't work for
them. There are several common mistakes:
o Didn't properly configure postgresql before
compilation. You must run configure with
--enable-locale option to enable locale support.
Didn't setup environment correctly when starting
postmaster. You must define environment variables
LC_CTYPE and LC_COLLATE before running postmaster
because backend gets information about locale from
environment. I use following shell script
(runpostgres):
#!/bin/sh
export LC_CTYPE=koi8-r
export LC_COLLATE=koi8-r
postmaster -B 1024 -S
-D/usr/local/pgsql/data/ -o '-Fe'
and run it from rc.local as
/bin/su - postgres -c
"/home/postgres/runpostgres"
o Broken locale support in OS (for example, locale
support in libc under Linux several times has
changed and this caused a lot of problems). Latest
perl has also support of locale and if locale is
broken perl -v will complain something like:
8:17[mira]:~/WWW/postgres>setenv LC_CTYPE
not_exist
8:18[mira]:~/WWW/postgres>perl -v
perl: warning: Setting locale failed.
perl: warning: Please check that your locale
settings:
LC_ALL = (unset),
LC_CTYPE = "not_exist",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard
locale ("C").
o Wrong location of locale files! Possible locations
include: /usr/lib/locale (Linux, Solaris),
/usr/share/locale (Linux), /usr/lib/nls/loc (DUX
4.0). Check man locale to find the correct
location. Under Linux I did a symbolic link between
/usr/lib/locale and /usr/share/locale to be sure
that the next libc will not break my locale.
What are the Benefits?
You can use ~* and order by operators for strings
contain characters from national alphabets.
Non-english users definitely need that. If you won't
use locale stuff just undefine the USE_LOCALE
variable.
What are the Drawbacks?
There is one evident drawback of using locale - its
speed! So, use locale only if you really need it.
Kerberos Authentication
Kerberos is an industry-standard secure
authentication system suitable for distributed
computing over a public network.
Availability
The Kerberos authentication system is not
distributed with Postgres. Versions of Kerberos are
typically available as optional software from
operating system vendors. In addition, a source code
distribution may be obtained through MIT Project
Athena (ftp://athena-dist.mit.edu).
Note: You may wish to obtain the MIT version even
if your vendor provides a version, since some
vendor ports have been deliberately crippled or
rendered non-interoperable with the MIT version.
Users located outside the United States of America
and Canada are warned that distribution of the actual
encryption code in Kerberos is restricted by U. S.
Government export regulations.
Inquiries regarding your Kerberos should be directed
to your vendor or MIT Project Athena
(info-kerberos@athena.mit.edu). Note that FAQLs
(Frequently-Asked Questions Lists) are periodically
posted to the Kerberos mailing list
(mailto:kerberos@ATHENA.MIT.EDU) (send mail to
subscribe (mailto:kerberos-request@ATHENA.MIT.EDU)),
and USENET news group (news:comp.protocols.kerberos).
Installation
Installation of Kerberos itself is covered in detail
in the Kerberos Installation Notes . Make sure that
the server key file (the srvtab or keytab) is somehow
readable by the Postgres account.
Postgres and its clients can be compiled to use
either Version 4 or Version 5 of the MIT Kerberos
protocols by setting the KRBVERS variable in the file
src/Makefile.global to the appropriate value. You can
also change the location where Postgres expects to
find the associated libraries, header files and its
own server key file.
After compilation is complete, Postgres must be
registered as a Kerberos service. See the Kerberos
Operations Notes and related manual pages for more
details on registering services.
Operation
After initial installation, Postgres should operate
in all ways as a normal Kerberos service. For details
on the use of authentication, see the PostgreSQL
User's Guide reference sections for postmaster and
psql.
In the Kerberos Version 5 hooks, the following
assumptions are made about user and service naming:
o User principal names (anames) are assumed to
contain the actual Unix/Postgres user name in the
first component.
o The Postgres service is assumed to be have two
components, the service name and a hostname,
canonicalized as in Version 4 (i.e., with all
domain suffixes removed).
Table 4-1. Kerberos Parameter Examples
Parameter Example
user frew@S2K.ORG
user aoki/HOST=miyu.S2K.Berkeley.EDU@S2K.ORG
host postgres_dbms/ucbvax@S2K.ORG
Support for Version 4 will disappear sometime after
the production release of Version 5 by MIT.
Chapter 5. Release Notes
Release 6.5
This release marks a major step in the development
team's mastery of the source code we inherited from
Berkeley. You will see we are now easily adding major
features, thanks to the increasing size and
experience of our world-wide development team.
Here is a brief summary of some of the more
noticable changes:
Multi-version concurrency control(MVCC)
This removes our old table-level locking, and
replaces it with a locking system that is superior
to most commercial database systems. In a
traditional system, each row that is modified is
locked until committed, preventing reads by other
users. MVCC uses the natural multi-version nature
of PostgreSQL to allow readers to continue reading
consistent data during writer activity. Writers
continue to use the compact pg_log transaction
system. This is all performed without having to
allocate a lock for every row like traditional
database systems. So, basically, we no longer are
restricted by simple table-level locking; we have
something better than row-level locking.
Numeric data type
We now have a true numeric data type, with
user-specified precision.
Temporary tables
Temporary tables are guaranteed to have unique
names within a database session, and are destroyed
on session exit.
New SQL features
We now have CASE, INTERSECT, and EXCEPT statement
support. We have new LIMIT/OFFSET, SET TRANSACTION
ISOLATION LEVEL, SELECT ... FOR UPDATE, and an
improved LOCK command.
Speedups
We continue to speed up PostgreSQL, thanks to the
variety of talents within our team. We have sped
up memory allocation, optimization, table joins,
and row transfer routines.
Ports
We continue to expand our port list, this time
including WinNT/ix86 and NetBSD/arm32.
Interfaces
Most interfaces have new versions, and existing
functionality has been improved.
Migration to v6.5
A dump/restore using pg_dump or pg_dumpall is
required for those wishing to migrate data from any
previous release of Postgres.
The new Multi-Version Concurrency Control (MVCC)
features can give somewhat different behaviors in
multi-user environments. Read and understand the
following section to ensure that your existing
applications will give you the behavior you need.
Multi-Version Concurrency Control
Because readers in 6.5 don't lock data, regardless
of transaction isolation level, data read by one
transaction can be overwritten by another. In the
other words, if a row is returned by SELECT it
doesn't mean that this row really exists at the time
it is returned (i.e. sometime after the statement or
transaction began) nor that the row is protected from
deletion or updation by concurrent transactions
before the current transaction does a commit or
rollback.
To ensure the actual existance of a row and protect
it against concurrent updates one must use SELECT FOR
UPDATE or an appropriate LOCK TABLE statement. This
should be taken into account when porting
applications from previous releases of Postgres and
other environments.
Keep above in mind if you are using contrib/refint.*
triggers for referential integrity. Additional
technics are required now. One way is to use LOCK
parent_table IN SHARE ROW EXCLUSIVE MODE command if a
transaction is going to update/delete a primary key
and use LOCK parent_table IN SHARE MODE command if a
transaction is going to update/insert a foreign key.
Note: Note that if you run a transaction in
SERIALIZABLE mode then you must execute LOCK
commands above before execution of any DML
statement
(SELECT/INSERT/DELETE/UPDATE/FETCH/COPY_TO) in the
transaction.
These inconveniences will disappear in the future
when the ability to read dirty (uncommitted) data
(regardless of isolation level) and true referential
integrity will be implemented.
Detailed Change List
Bug Fixes
---------
Fix text<->float8 and text<->float4 conversion
functions(Thomas)
Fix for creating tables with mixed-case
constraints(Billy)
Change exp()/pow() behavior to generate error on
underflow/overflow(Jan)
Fix bug in pg_dump -z
Memory overrun cleanups(Tatsuo)
Fix for lo_import crash(Tatsuo)
Adjust handling of data type names to suppress double
quotes(Thomas)
Use type coersion for matching columns and
DEFAULT(Thomas)
Fix deadlock so it only checks once after one second
of sleep(Bruce)
Fixes for aggregates and PL/pgsql(Hiroshi)
Fix for subquery crash(Vadim)
Fix for libpq function PQfnumber and case-insensitive
names(Bahman Rafatjoo)
Fix for large object write-in-middle, no extra block,
memory consumption(Tatsuo)
Fix for pg_dump -d or -D and quote special
characters in INSERT
Repair serious problems with dynahash(Tom)
Fix INET/CIDR portability problems
Fix problem with selectivity error in ALTER TABLE ADD
COLUMN(Bruce)
Fix executor so mergejoin of different column types
works(Tom)
Fix for Alpha OR selectivity bug
Fix OR index selectivity problem(Bruce)
Fix so \d shows proper length for
char()/varchar()(Ryan)
Fix tutorial code(Clark)
Improve destroyuser checking(Oliver)
Fix for Kerberos(Rodney McDuff)
Fix for dropping database while dirty buffers(Bruce)
Fix so sequence nextval() can be
case-sensitive(Bruce)
Fix !!= operator
Drop buffers before destroying database files(Bruce)
Fix case where executor evaluates functions
twice(Tatsuo)
Allow sequence nextval actions to be
case-sensitive(Bruce)
Fix optimizer indexing not working for negative
numbers(Bruce)
Fix for memory leak in executor with fjIsNull
Fix for aggregate memory leaks(Erik Riedel)
Allow username containing a dash GRANT permissions
Cleanup of NULL in inet types
Clean up system table bugs(Tom)
Fix problems of PAGER and \? command(Masaaki Sakaida)
Reduce default multi-segment file size limit to
1GB(Peter)
Fix for dumping of CREATE OPERATOR(Tom)
Fix for backward scanning of cursors(Hiroshi Inoue)
Fix for COPY FROM STDIN when using \i(Tom)
Fix for subselect is compared inside an
expression(Jan)
Fix handling of error reporting while returning
rows(Tom)
Fix problems with reference to array types(Tom,Jan)
Prevent UPDATE SET oid(Jan)
Fix pg_dump so -t option can handle case-sensitive
tablenames
Fixes for GROUP BY in special cases(Tom, Jan)
Fix for memory leak in failed queries(Tom)
DEFAULT now supports mixed-case identifiers(Tom)
Fix for multi-segment uses of DROP/RENAME table,
indexes(Ole Gjerde)
Enhancements
------------
Add "vacuumdb" utility
Speed up libpq by allocating memory better(Tom)
EXPLAIN all indices used(Tom)
Implement CASE, COALESCE, NULLIF expression(Thomas)
New pg_dump table output format(Constantin)
Add string min()/max() functions(Thomas)
Extend new type coersion techniques to
aggregates(Thomas)
New moddatetime contrib(Terry)
Update to pgaccess 0.96(Constantin)
Add routines for single-byte "char" type(Thomas)
Improved substr() function(Thomas)
Improved multi-byte handling(Tatsuo)
Multi-version concurrency control/MVCC(Vadim)
New Serialized mode(Vadim)
Fix for tables over 2gigs(Peter)
New SET TRANSACTION ISOLATION LEVEL(Vadim)
New LOCK TABLE IN ... MODE(Vadim)
Update ODBC driver(Byron)
New NUMERIC data type(Jan)
New SELECT FOR UPDATE(Vadim)
Handle "NaN" and "Infinity" for input values(Jan)
Improved date/year handling(Thomas)
Improved handling of backend connections(Magnus)
New options ELOG_TIMESTAMPS and USE_SYSLOG options
for log files(Massimo)
New TCL_ARRAYS option(Massimo)
New INTERSECT and EXCEPT(Stefan)
New pg_index.indisprimary for primary key
tracking(D'Arcy)
New pg_dump option to allow dropping of tables before
creation(Brook)
Speedup of row output routines(Tom)
New READ COMMITTED isolation level(Vadim)
New TEMP tables/indexes(Bruce)
Prevent sorting if result is already sorted(Jan)
New memory allocation optimization(Jan)
Allow psql to do \p\g(Bruce)
Allow multiple rule actions(Jan)
Added LIMIT/OFFSET functionality(Jan)
Improve optimizer when joining a large number of
tables(Bruce)
New intro to SQL from S. Simkovics' Master's Thesis
(Stefan, Thomas)
New intro to backend processing from S. Simkovics'
Master's Thesis (Stefan)
Improved int8 support(Ryan Bradetich, Thomas, Tom)
New routines to convert between int8 and text/varchar
types(Thomas)
New bushy plans, where meta-tables are joined(Bruce)
Enable right-hand queries by default(Bruce)
Allow reliable maximum number of backends to be set
at configure time
(--with-maxbackends and postmaster switch (-N
backends))(Tom)
GEQO default now 10 tables because of optimizer
speedups(Tom)
Allow NULL=Var for MS-SQL portability(Michael, Bruce)
Modify contrib check_primary_key() so either
"automatic" or "dependent"(Anand)
Allow psql \d on a view show query(Ryan)
Speedup for LIKE(Bruce)
Ecpg fixes/features, see
src/interfaces/ecpg/ChangeLog file(Michael)
JDBC fixes/features, see
src/interfaces/jdbc/CHANGELOG(Peter)
Make % operator have precedence like /(Bruce)
Add new postgres -O option to allow system table
structure changes(Bruce)
Update contrib/pginterface/findoidjoins script(Tom)
Major speedup in vacuum of deleted rows with
indexes(Vadim)
Allow non-SQL functions to run different versions
based on arguments(Tom)
Add -E option that shows actual queries sent by \dt
and friends(Masaaki Sakaida)
Add version number in startup banners for
psql(Masaaki Sakaida)
New contrib/vacuumlo removes large objects not
referenced(Peter)
New initialization for table sizes so non-vacuumed
tables perform better(Tom)
Improve error messages when a connection is
rejected(Tom)
Support for arrays of char() and varchar()
fields(Massimo)
Overhaul of hash code to increase reliability and
performance(Tom)
Update to PyGreSQL 2.4(D'Arcy)
Changed debug options so -d4 and -d5 produce
different node displays(Jan)
New pg_options: pretty_plan, pretty_parse,
pretty_rewritten(Jan)
Better optimization statistics for system table
access(Tom)
Better handling of non-default block sizes(Massimo)
Improve GEQO optimizer memory consumption(Tom)
UNION now suppports ORDER BY of columns not in target
list(Jan)
Major libpq++ improvements(Vince Vielhaber)
Source Tree Changes
-------------------
Improve port matching(Tom)
Portability fixes for SunOS
Add NT/Win32 backend port and enable dynamic
loading(Magnus and Daniel Horak)
New port to Cobalt Qube(Mips) running Linux(Tatsuo)
Port to NetBSD/m68k(Mr. Mutsuki Nakajima)
Port to NetBSD/sun3(Mr. Mutsuki Nakajima)
Port to NetBSD/macppc(Toshimi Aoki)
Fix for tcl/tk configuration(Vince)
Removed CURRENT keyword for rule queries(Jan)
NT dynamic loading now works(Daniel Horak)
Add ARM32 support(Andrew McMurry)
Better support for HPUX 11 and Unixware
Improve file handling to be more uniform, prevent
file descriptor leak(Tom)
New install commands for plpgsql(Jan)