postgresql/config/perl.m4
Noah Misch 65a00f3035 MSVC: Test whether 32-bit Perl needs -D_USE_32BIT_TIME_T.
Commits 5a5c2feca3 and
b5178c5d08 introduced support for modern
MSVC-built, 32-bit Perl, but they broke use of MinGW-built, 32-bit Perl
distributions like Strawberry Perl and modern ActivePerl.  Perl has no
robust means to report whether it expects a -D_USE_32BIT_TIME_T ABI, so
test this.  Back-patch to 9.3 (all supported versions).

The chief alternative was a heuristic of adding -D_USE_32BIT_TIME_T when
$Config{gccversion} is nonempty.  That banks on every gcc-built Perl
using the same ABI.  gcc could change its default ABI the way MSVC once
did, and one could build Perl with gcc and the non-default ABI.

The GNU make build system could benefit from a similar test, without
which it does not support MSVC-built Perl.  For now, just add a comment.
Most users taking the special step of building Perl with MSVC probably
build PostgreSQL with MSVC.

Discussion: https://postgr.es/m/20171130041441.GA3161526@rfd.leadboat.com
2017-12-08 18:06:05 -08:00

114 lines
4.6 KiB
Plaintext

# config/perl.m4
# PGAC_PATH_PERL
# --------------
AC_DEFUN([PGAC_PATH_PERL],
[PGAC_PATH_PROGS(PERL, perl)
if test "$PERL"; then
pgac_perl_version=`$PERL -v 2>/dev/null | sed -n ['s/This is perl.*v[a-z ]*\([0-9]\.[0-9][0-9.]*\).*$/\1/p']`
AC_MSG_NOTICE([using perl $pgac_perl_version])
if echo "$pgac_perl_version" | sed ['s/[.a-z_]/ /g'] | \
$AWK '{ if ([$]1 == 5 && [$]2 >= 8) exit 1; else exit 0;}'
then
AC_MSG_WARN([
*** The installed version of Perl, $PERL, is too old to use with PostgreSQL.
*** Perl version 5.8 or later is required, but this is $pgac_perl_version.])
PERL=""
fi
fi
if test -z "$PERL"; then
AC_MSG_WARN([
*** Without Perl you will not be able to build PostgreSQL from Git.
*** You can obtain Perl from any CPAN mirror site.
*** (If you are using the official distribution of PostgreSQL then you do not
*** need to worry about this, because the Perl output is pre-generated.)])
fi
])# PGAC_PATH_PERL
# PGAC_CHECK_PERL_CONFIG(NAME)
# ----------------------------
AC_DEFUN([PGAC_CHECK_PERL_CONFIG],
[AC_REQUIRE([PGAC_PATH_PERL])
AC_MSG_CHECKING([for Perl $1])
perl_$1=`$PERL -MConfig -e 'print $Config{$1}'`
test "$PORTNAME" = "win32" && perl_$1=`echo $perl_$1 | sed 's,\\\\,/,g'`
AC_SUBST(perl_$1)dnl
AC_MSG_RESULT([$perl_$1])])
# PGAC_CHECK_PERL_CONFIGS(NAMES)
# ------------------------------
AC_DEFUN([PGAC_CHECK_PERL_CONFIGS],
[m4_foreach([pgac_item], [$1], [PGAC_CHECK_PERL_CONFIG(pgac_item)])])
# PGAC_CHECK_PERL_EMBED_CCFLAGS
# -----------------------------
# We selectively extract stuff from $Config{ccflags}. For debugging purposes,
# let's have the configure output report the raw ccflags value as well as the
# set of flags we chose to adopt. We don't really need anything except -D
# switches, and other sorts of compiler switches can actively break things if
# Perl was compiled with a different compiler. Moreover, although Perl likes
# to put stuff like -D_LARGEFILE_SOURCE and -D_FILE_OFFSET_BITS=64 here, it
# would be fatal to try to compile PL/Perl to a different libc ABI than core
# Postgres uses. The available information says that most symbols that affect
# Perl's own ABI begin with letters, so it's almost sufficient to adopt -D
# switches for symbols not beginning with underscore. Some exceptions are the
# Windows-specific -D_USE_32BIT_TIME_T and -D__MINGW_USE_VC2005_COMPAT; see
# Mkvcbuild.pm for details. We absorb the former when Perl reports it. Perl
# never reports the latter, and we don't attempt to deduce when it's needed.
# Consequently, we don't support using MinGW to link to MSVC-built Perl. As
# of 2017, all supported ActivePerl and Strawberry Perl are MinGW-built. If
# that changes or an MSVC-built Perl distribution becomes prominent, we can
# revisit this limitation.
AC_DEFUN([PGAC_CHECK_PERL_EMBED_CCFLAGS],
[AC_REQUIRE([PGAC_PATH_PERL])
AC_MSG_CHECKING([for CFLAGS recommended by Perl])
perl_ccflags=`$PERL -MConfig -e ['print $Config{ccflags}']`
AC_MSG_RESULT([$perl_ccflags])
AC_MSG_CHECKING([for CFLAGS to compile embedded Perl])
perl_embed_ccflags=`$PERL -MConfig -e ['foreach $f (split(" ",$Config{ccflags})) {print $f, " " if ($f =~ /^-D[^_]/ || $f =~ /^-D_USE_32BIT_TIME_T/)}']`
AC_SUBST(perl_embed_ccflags)dnl
AC_MSG_RESULT([$perl_embed_ccflags])
])# PGAC_CHECK_PERL_EMBED_CCFLAGS
# PGAC_CHECK_PERL_EMBED_LDFLAGS
# -----------------------------
# We are after Embed's ldopts, but without the subset mentioned in
# Config's ccdlflags; and also without any -arch flags, which recent
# Apple releases put in unhelpfully. (If you want a multiarch build
# you'd better be specifying it in more places than plperl's final link.)
AC_DEFUN([PGAC_CHECK_PERL_EMBED_LDFLAGS],
[AC_REQUIRE([PGAC_PATH_PERL])
AC_MSG_CHECKING(for flags to link embedded Perl)
if test "$PORTNAME" = "win32" ; then
perl_lib=`basename $perl_archlibexp/CORE/perl[[5-9]]*.lib .lib`
if test -e "$perl_archlibexp/CORE/$perl_lib.lib"; then
perl_embed_ldflags="-L$perl_archlibexp/CORE -l$perl_lib"
else
perl_lib=`basename $perl_archlibexp/CORE/libperl[[5-9]]*.a .a | sed 's/^lib//'`
if test -e "$perl_archlibexp/CORE/lib$perl_lib.a"; then
perl_embed_ldflags="-L$perl_archlibexp/CORE -l$perl_lib"
fi
fi
else
pgac_tmp1=`$PERL -MExtUtils::Embed -e ldopts`
pgac_tmp2=`$PERL -MConfig -e 'print $Config{ccdlflags}'`
perl_embed_ldflags=`echo X"$pgac_tmp1" | sed -e "s/^X//" -e "s%$pgac_tmp2%%" -e ["s/ -arch [-a-zA-Z0-9_]*//g"]`
fi
AC_SUBST(perl_embed_ldflags)dnl
if test -z "$perl_embed_ldflags" ; then
AC_MSG_RESULT(no)
AC_MSG_ERROR([could not determine flags for linking embedded Perl.
This probably means that ExtUtils::Embed or ExtUtils::MakeMaker is not
installed.])
else
AC_MSG_RESULT([$perl_embed_ldflags])
fi
])# PGAC_CHECK_PERL_EMBED_LDFLAGS