This commit changes how the worker goroutines for saving e.g. blobs
interact. Before, it was possible to get stuck sending an instruction to
archive a file or dir when no worker goroutines were available any more.
This commit introduces a `done` channel for each of the worker pools,
which is set to the channel returned by `tomb.Dying()`, so it is closed
when the first worker returned an error.
This commit changes the archiver so that low-level errors saving data to
the repo are returned to the caller (instead of being handled by the
error callback function). This correctly bubbles up errors like a full
temp file system and makes restic abort early and makes all other worker
goroutines exit.
This now keeps the cursor at the first column of the first status line
so that messages printed to stdout or stderr by some other part of the
progarm will still be visible. The message will overwrite the status
lines, but those are easily reprinted on the next status update.
The previous code tried to be as efficient as possible and only do a
single open() on an item to save, and then fstat() on the fd to find out
what the item is (file, dir, other). For normal files, it would then
start reading the data without opening the file again, so it could not
be exchanged for e.g. a symlink.
This behavior starts the watchdog on my machine when /dev is saved
with restic, and after a few seconds, the machine reboots.
This commit reverts the behavior to the strategy the old archiver code
used: run lstat(), then decide what to do. For normal files, open the
file and then run fstat() on the fd to verify it's still a normal file,
then start reading the data.
The downside is that for normal files we now do two stat() calls
(lstat+fstat) instead of only one. On the upside, this does not start
the watchdog. :)
Previously, the function read from ARGV[1] (hardcoded) rather than the
value passed to it, the command-line argument as it exists in globalOptions.
Resolves#1745
This adds two implementations of the new `FS` interface: One for the local
file system (`Local`) and one for a single file read from an
`io.Reader` (`Reader`).
This change removes the hardcoded Google auth mechanism for the GCS
backend, instead using Google's provided client library to discover and
generate credential material.
Google recommend that client libraries use their common auth mechanism
in order to authorise requests against Google services. Doing so means
you automatically support various types of authentication, from the
standard GOOGLE_APPLICATION_CREDENTIALS environment variable to making
use of Google's metadata API if running within Google Container Engine.
Before this change restic would attempt to JSON decode the error
message resulting in confusing `Decode: invalid character 'B' looking
for beginning of value` messages. Afterwards it will return `List
failed, server response: 400 Bad Request (400)`
This commit fixes a bug introduced in
e9ea268847: When an invalid lock is
encountered (e.g. if the file is empty), the code used to ignore that,
but now returns the error.
Now, invalid files are ignored for the normal lock check, and removed
when `restic unlock --remove-all` is run.
Closes#1652
As mentioned in issue [#1560](https://github.com/restic/restic/pull/1560#issuecomment-364689346)
this changes the signature for `backend.Save()`. It now takes a
parameter of interface type `RewindReader`, so that the backend
implementations or our `RetryBackend` middleware can reset the reader to
the beginning and then retry an upload operation.
The `RewindReader` interface also provides a `Length()` method, which is
used in the backend to get the size of the data to be saved. This
removes several ugly hacks we had to do to pull the size back out of the
`io.Reader` passed to `Save()` before. In the `s3` and `rest` backend
this is actively used.
This is a bug fix: Before, when the worker function fn in List() of the
RetryBackend returned an error, the operation is retried with the next
file. This is not consistent with the documentation, the intention was
that when fn returns an error, this is passed on to the caller and the
List() operation is aborted. Only errors happening on the underlying
backend are retried.
The error leads to restic ignoring exclusive locks that are present in
the repo, so it may happen that a new backup is written which references
data that is going to be removed by a concurrently running `prune`
operation.
The bug was reported by a user here:
https://forum.restic.net/t/restic-backup-returns-0-exit-code-when-already-locked/484
This pulls the header reads into a function that works in terms of the
number of records requested. This preserves the existing logic of
initially reading 15 records and then falling back if that fails.
In the event of a header with more than 15 records, it will read all
records, including the already-seen final 15 records.
Before, all backend implementations were required to return an error if
the file that is to be written already exists in the backend. For most
backends, that means making a request (e.g. via HTTP) and returning an
error when the file already exists.
This is not accurate, the file could have been created between the HTTP
request testing for it, and when writing starts. In addition, apart from
the `config` file in the repo, all other file names have pseudo-random
names with a very very low probability of a collision. And even if a
file name is written again, the way the restic repo is structured this
just means that the same content is placed there again. Which is not a
problem, just not very efficient.
So, this commit relaxes the requirement to return an error when the file
in the backend already exists, which allows reducing the number of API
requests and thereby the latency for remote backends.
During the development of #1524 I discovered that the Google Cloud
Storage backend did not yet use the HTTP transport, so things such as
bandwidth limiting did not work. This commit does the necessary magic to
make the GS library use our HTTP transport.
A user discovered[1] that when the backup finishes during the upload of
an intermediate index, the upload is cancelled and the index never fully
saved, but the snapshot is saved and the backup finalizes without an
error. This lead to a situation where a snapshot references data that is
contained in the repo, but not referenced in any index, leading to
strange error messages.
This commit uses a dedicated context to signal the intermediate index
uploading routine to terminate after the last index has been uploaded.
This way, an upload running when the backup finishes is completed before
the routine terminates and the snapshot is saved.
[1] https://forum.restic.net/t/error-loading-tree-check-prune-and-forget-gives-error-b2-backend/406
The logging in these functions double the time they take to execute.
However, it is only really useful on failures, which are better
reported by the calling functions.
benchmark old ns/op new ns/op delta
BenchmarkMasterIndexLookupSingleIndex-6 897 395 -55.96%
BenchmarkMasterIndexLookupMultipleIndex-6 2001 1090 -45.53%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 492 215 -56.30%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 1649 912 -44.69%
benchmark old allocs new allocs delta
BenchmarkMasterIndexLookupSingleIndex-6 9 1 -88.89%
BenchmarkMasterIndexLookupMultipleIndex-6 19 1 -94.74%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 6 0 -100.00%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 16 0 -100.00%
benchmark old bytes new bytes delta
BenchmarkMasterIndexLookupSingleIndex-6 160 96 -40.00%
BenchmarkMasterIndexLookupMultipleIndex-6 240 96 -60.00%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 48 0 -100.00%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 128 0 -100.00%
Index.Has() is a faster then Index.Lookup() for checking if a blob exists
in the index. As the returned data is never used, this avoids a ton
of allocations.
When looking up a blob in the master index, with several
indexes present in the master index, a significant amount of time
is spent generating errors for each failed lookup. However, these
errors are often used to check if a blob is present, but the contents
are not inspected making the overhead of the error not useful.
Instead, change Index.Lookup (and Index.LookupSize) to instead return
a boolean denoting if the blob was found instead of an error. Also change
all the calls to these functions to handle the new function signature.
benchmark old ns/op new ns/op delta
BenchmarkMasterIndexLookupSingleIndex-6 820 897 +9.39%
BenchmarkMasterIndexLookupMultipleIndex-6 12821 2001 -84.39%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 5378 492 -90.85%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 17026 1649 -90.31%
benchmark old allocs new allocs delta
BenchmarkMasterIndexLookupSingleIndex-6 9 9 +0.00%
BenchmarkMasterIndexLookupMultipleIndex-6 59 19 -67.80%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 22 6 -72.73%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 72 16 -77.78%
benchmark old bytes new bytes delta
BenchmarkMasterIndexLookupSingleIndex-6 160 160 +0.00%
BenchmarkMasterIndexLookupMultipleIndex-6 3200 240 -92.50%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 1232 48 -96.10%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 4272 128 -97.00%
When setting up the index used for benchmarking, use math/rand instead of
crypto/rand since the generated ids don't need to be evenly distributed,
and not be secure against guessing. As such, use a different random id
function (only available during tests) that uses math/rand instead.
Load pack header length and 15 header entries with single backend
request. This eliminates separate header Load() request for most pack
files and significantly improves index.New() performance.
Signed-off-by: Igor Fedorenko <igor@ifedorenko.com>
This reduces the chance of duplicate blobs, otherwise the tests fail
(make the contents of a blob depend on a pseudo-random number instead of
the size, sizes may be duplicate).
Use result of single repository.List() to find both missing and
orphaned data packs. For 500GB repository this eliminates ~100K
repository.Test() calls and improves check time by >30M in my
environment (~45min before this change and ~7min after).
Signed-off-by: Igor Fedorenko <igor@ifedorenko.com>
This is a follow-up on fb9729fdb9, which
runs the `ssh` in its own process group and selects that process group
as the foreground group. After the sftp connection is established,
restic switches back to the previous foreground process group.
This allows `ssh` to prompt for the password, but it won't receive
the interrupt signal (SIGINT, ^C) later on, because it is not in the
foreground process group any more, allowing a clean tear down.
When backing up several million files (>14M tested here) with few changes,
a large amount of time is spent failing to find an id in an index and creating
an error to signify this. Since this is checked using the Has method,
which doesn't use this error, this time creating the error is wasted.
Instead, directly check if the given id and type are present in the index.
This also avoids reporting all the packs containing this blob, further
reducing cpu usage.
We added previously a code to fix the issue of chaining
credentials, we do not need this anymore since the
upstream minio-go already has this relevant change.
Before, creating a new repo via REST would use the defaut HTTP client,
which is not a problem unless the server uses HTTPS and a TLS
certificate which isn't signed by a CA in the system's CA store. In this
case, all commands work except the 'init' command, which fails with a
message like "invalid certificate".
chaining failed because chaining provider
was only looking for subsequent credentials
provider after an error. Writer a new
chaining provider which proceeds to fetch
new credentials also under situations where
providers do not return but instead return
no keys at all.
Fixes https://github.com/restic/restic/issues/1422
List().
move comment regarding problematic List() backend api (it's s3's ListObjects
that has a problem, NOT swift's ObjectsWalk).
As per discussion in PR #1399.
This is a fix for the following situation (gh-1188):
List() grabs a semaphore token upon entry, starts a goroutine, and
does not release the token until the routine exits (via a defer).
The goroutine iterates over the results from ListCurrentObjects(),
sending them one at a time to a channel, where they are ultimately
processed by be.Load().
Since be.Load() also needs a token, this will result in deadlock if
b2.connections=1.
This fix changes List() so that the token is only held during the call
to ListCurrentObjects().
Add a RESTIC_PROGRESS_FPS environment variable to limit the interval
at which the progress indicator updates (allowed values: 1-60).
The default rate of 60 FPS can cause high terminal CPU load on some
systems, like iTerm2 on macOS with font anti-aliasing enabled.
Usage:
RESTIC_PROGRESS_FPS=1 restic ...
RESTIC_PROGRESS_FPS=60 restic ...
- be explicit when discarding returned errors from .Close(), etc.
- remove named return values from funcs when naked return not used
- fix some "err" shadowing when redeclaration not needed
Sometimes s3 listobjects for a directory includes an entry for that
directory. The restic s3 backend doesn't expect that and returns
an error.
Symptom is:
ReadDir: invalid key name restic/key/, removing prefix
restic/key/ yielded empty string
I'm not sure when s3 does that; I'm unable to reproduce it myself.
But in any case, it seems correct to ignore that when it happens.
Fixes#1068
By default, the GCS Go packages have an internal "chunk size" of 8MB,
used for blob uploads.
Media().Do() will buffer a full 8MB from the io.Reader (or less if EOF
is reached) then write that full 8MB to the network all at once.
This behavior does not play nicely with --limit-upload, which only
limits the Reader passed to Media. While the long-term average upload
rate will be correctly limited, the actual network bandwidth will be
very spikey.
e.g., if an 8MB/s connection is limited to 1MB/s, Media().Do() will
spend 8s reading from the rate-limited reader (performing no network
requests), then 1s writing to the network at 8MB/s.
This is bad for network connections hurt by full-speed uploads,
particularly when writing 8MB will take several seconds.
Disable resumable uploads entirely by setting the chunk size to zero.
This causes the io.Reader to be passed further down the request stack,
where there is less (but still some) buffering.
My connection is around 1.5MB/s up, with nominal ~15ms ping times to
8.8.8.8.
Without this change, --limit-upload 1024 results in several seconds of
~200ms ping times (uploading), followed by several seconds of ~15ms ping
times (reading from rate-limited reader). A bandwidth monitor reports
this as several seconds of ~1.5MB/s followed by several seconds of
0.0MB/s.
With this change, --limit-upload 1024 results in ~20ms ping times and
the bandwidth monitor reports a constant ~1MB/s.
I've elected to make this change unconditional of --limit-upload because
the resumable uploads shouldn't be providing much benefit anyways, as
restic already uploads mostly small blobs and already has a retry
mechanism.
--limit-download is not affected by this problem, as Get().Download()
returns the real http.Response.Body without any internal buffering.
Updates #1216
This PR adds the ability of chaining the credentials provider,
such that restic as a tool attempts to honor credentials from
multiple different ways.
Currently supported mechanisms are
- static (user-provided)
- IAM profile (only valid inside configured ec2 instances)
- Standard AWS envs (AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY)
- Standard Minio envs (MINIO_ACCESS_KEY, MINIO_SECRET_KEY)
Refer https://github.com/restic/restic/issues/1341
Windows, and to a lesser extent OS X, don't conform to XDG and have
their own preferred locations for caches.
On Windows, use %LOCALAPPDATA%/restic (i.e., ~/AppData/Local/restic). I
can't find authoritative documentation from Microsoft recommending
specifically which of %APPDATA%, %LOCALAPPDATA%, and %TEMP% should be
used for caches, but %LOCALAPPDATA% is where browsers store their
caches, so it seems like a good fit.
On OS X, use ~/Library/Caches/restic, which is recommended by the Apple
documentation. They do suggest using the application "bundle identifier"
as the base folder name, but restic doesn't have one, so I just used
"restic".
If the service account used with restic does not have the
storage.buckets.get permission (in the "Storage Admin" role), Create
cannot use Get to determine if the bucket is accessible.
Rather than always trying to create the bucket on Get error, gracefully
fall back to assuming the bucket is accessible. If it is, restic init
will complete successfully. If it is not, it will fail on a later call.
Here is what init looks like now in different cases.
Service account without "Storage Admin":
Bucket exists and is accessible (this is the case that didn't work
before):
$ ./restic init -r gs:this-bucket-does-exist:/
enter password for new backend:
enter password again:
created restic backend c02e2edb67 at gs:this-bucket-does-exist:/
Please note that knowledge of your password is required to access
the repository. Losing your password means that your data is
irrecoverably lost.
Bucket exists but is not accessible:
$ ./restic init -r gs:this-bucket-does-exist:/
enter password for new backend:
enter password again:
create key in backend at gs:this-bucket-does-exist:/ failed:
service.Objects.Insert: googleapi: Error 403:
my-service-account@myproject.iam.gserviceaccount.com does not have
storage.objects.create access to object this-bucket-exists/keys/0fa714e695c8ecd58cb467cdeb04d36f3b710f883496a90f23cae0315daf0b93., forbidden
Bucket does not exist:
$ ./restic init -r gs:this-bucket-does-not-exist:/
create backend at gs:this-bucket-does-not-exist:/ failed:
service.Buckets.Insert: googleapi: Error 403:
my-service-account@myproject.iam.gserviceaccount.com does not have storage.buckets.create access to bucket this-bucket-does-not-exist., forbidden
Service account with "Storage Admin":
Bucket exists and is accessible: Same
Bucket exists but is not accessible: Same. Previously this would fail
when Create tried to create the bucket. Now it fails when trying to
create the keys.
Bucket does not exist:
$ ./restic init -r gs:this-bucket-does-not-exist:/
enter password for new backend:
enter password again:
created restic backend c3c48b481d at gs:this-bucket-does-not-exist:/
Please note that knowledge of your password is required to access
the repository. Losing your password means that your data is
irrecoverably lost.
This commit adds code to synchronize downloading files to the cache.
Before, requests that came in for files currently downloading would fail
because the file was not completed in the cache. Now, the code waits
until the download is completed.
Closes#1278
This commit adds a function to the cache which can decide to proactively
load the complete pack file and store it in the cache. This is helpful
for pack files containing only tree blobs, as it is likely that the same
file is accessed again in the future.
This commits adds rudimentary support for a cache directory, enabled by
default. The cache directory is created if it does not exist. The cache
is used if there's anything in it, newly created snapshot and index
files are written to the cache automatically.
In the manual, state which standard roles the service account must
have to work correctly, as well as the specific permissions required,
for creating even more specific custom roles.