If pg_regcomp failed after having invoked markst/cleanst, it would leak any
"struct subre" nodes it had created. (We've already detected all regex
syntax errors at that point, so the only likely causes of later failure
would be query cancel or out-of-memory.) To fix, make sure freesrnode
knows the difference between the pre-cleanst and post-cleanst cleanup
procedures. Add some documentation of this less-than-obvious point.
Also, newlacon did the wrong thing with an out-of-memory failure from
realloc(), so that the previously allocated array would be leaked.
Both of these are pretty low-probability scenarios, but a bug is a bug,
so patch all the way back.
Per bug #10976 from Arthur O'Dwyer.
Trying to reassign objects owned by a user that had text search
dictionaries or configurations used to fail with:
ERROR: unexpected classid 3600
or
ERROR: unexpected classid 3602
Fix by adding cases for those object types in a switch in pg_shdepend.c.
Both REASSIGN OWNED and text search objects go back all the way to 8.1,
so backpatch to all supported branches. In 9.3 the alter-owner code was
made generic, so the required change in recent branches is pretty
simple; however, for 9.2 and older ones we need some additional
reshuffling to enable specifying objects by OID rather than name.
Text search templates and parsers are not owned objects, so there's no
change required for them.
Per bug #9749 reported by Michal Novotný
ExecEvalWholeRowVar incorrectly supposed that it could "bless" the source
TupleTableSlot just once per query. But if the input is coming from an
Append (or, perhaps, other cases?) more than one slot might be returned
over the query run. This led to "record type has not been registered"
errors when a composite datum was extracted from a non-blessed slot.
This bug has been there a long time; I guess it escaped notice because when
dealing with subqueries the planner tends to expand whole-row Vars into
RowExprs, which don't have the same problem. It is possible to trigger
the problem in all active branches, though, as illustrated by the added
regression test.
While the x output of "select x from t group by x" can be presumed unique,
this does not hold for "select x, generate_series(1,10) from t group by x",
because we may expand the set-returning function after the grouping step.
(Perhaps that should be re-thought; but considering all the other oddities
involved with SRFs in targetlists, it seems unlikely we'll change it.)
Put a check in query_is_distinct_for() so it's not fooled by such cases.
Back-patch to all supported branches.
David Rowley
This function wasn't originally thought to be really user-facing,
because converting a table to a view isn't something we expect people
to do manually. So not all that much effort was spent on the error
messages; in particular, while the code will complain that you got
the column types wrong it won't say exactly what they are. But since
we repurposed the code to also check compatibility of rule RETURNING
lists, it's definitely user-facing. It now seems worthwhile to add
errdetail messages showing exactly what the conflict is when there's
a mismatch of column names or types. This is prompted by bug #10836
from Matthias Raffelsieper, which might have been forestalled if the
error message had reported the wrong column type as being "record".
Per Alvaro's advice, back-patch to branches before 9.4, but resist
the temptation to rephrase any existing strings there. Adding new
strings is not really a translation degradation; anyway having the
info presented in English is better than not having it at all.
7380b63 changed log_filename so that epoch was not appended to it
when no format specifier is given. But the example of CSV log file name
with epoch still left in log_filename document. This commit removes
such obsolete example.
This commit also documents the defaults of log_directory and
log_filename.
Backpatch to all supported versions.
Christoph Berg
ExecMakeTableFunctionResult evaluated the arguments for a function-in-FROM
in the query-lifespan memory context. This is insignificant in simple
cases where the function relation is scanned only once; but if the function
is in a sub-SELECT or is on the inside of a nested loop, any memory
consumed during argument evaluation can add up quickly. (The potential for
trouble here had been foreseen long ago, per existing comments; but we'd
not previously seen a complaint from the field about it.) To fix, create
an additional temporary context just for this purpose.
Per an example from MauMau. Back-patch to all active branches.
Commit 453a5d91d4 made it available to the
src/test/regress build of pg_regress, but all pg_regress builds need the
same treatment. Patch 9.2 through 8.4; in 9.3 and later, pg_regress
gets pqsignal() via libpgport.
Any OS user able to access the socket can connect as the bootstrap
superuser and proceed to execute arbitrary code as the OS user running
the test. Protect against that by placing the socket in a temporary,
mode-0700 subdirectory of /tmp. The pg_regress-based test suites and
the pg_upgrade test suite were vulnerable; the $(prove_check)-based test
suites were already secure. Back-patch to 8.4 (all supported versions).
The hazard remains wherever the temporary cluster accepts TCP
connections, notably on Windows.
As a convenient side effect, this lets testing proceed smoothly in
builds that override DEFAULT_PGSOCKET_DIR. Popular non-default values
like /var/run/postgresql are often unwritable to the build user.
Security: CVE-2014-0067
This function is pervasive on free software operating systems; import
NetBSD's implementation. Back-patch to 8.4, like the commit that will
harness it.
Prior to 9.0, pg_dump handled comments on large objects by dumping a bunch
of COMMENT commands into a single BLOB COMMENTS archive object. With
sufficiently many such comments, some of the commands would likely get
split across bufferloads when restoring, causing failures in
direct-to-database restores (though no problem would be evident in text
output). This is the same type of issue we have with table data dumped as
INSERT commands, and it can be fixed in the same way, by using a mini SQL
lexer to figure out where the command boundaries are. Fortunately, the
COMMENT commands are no more complex to lex than INSERTs, so we can just
re-use the existing lexer for INSERTs.
Per bug #10611 from Jacek Zalewski. Back-patch to all active branches.
Robert Frost is no longer with us, but his copyrights still are, so
let's stop using "Stopping by Woods on a Snowy Evening" as test data
before somebody decides to sue us. Wordsworth is more safely dead.
When we grabbed this file off the Snowball project's website, we mistakenly
supposed that it was in LATIN1 encoding, but evidently it was actually in
LATIN2. This resulted in ő (o-double-acute, U+0151, which is code 0xF5 in
LATIN2) being misconverted into õ (o-tilde, U+00F5), as complained of in
bug #10589 from Zoltán Sörös. We'd have messed up u-double-acute too,
but there aren't any of those in the file. Other characters used in the
file have the same codes in LATIN1 and LATIN2, which no doubt helped hide
the problem for so long.
The error is not only ours: the Snowball project also was confused about
which encoding is required for Hungarian. But dealing with that will
require source-code changes that I'm not at all sure we'll wish to
back-patch. Fixing the stopword file seems reasonably safe to back-patch
however.
It's critical that the backend's idea of LOBLKSIZE match the way data has
actually been divided up in pg_largeobject. While we don't provide any
direct way to adjust that value, doing so is a one-line source code change
and various people have expressed interest recently in changing it. So,
just as with TOAST_MAX_CHUNK_SIZE, it seems prudent to record the value in
pg_control and cross-check that the backend's compiled-in setting matches
the on-disk data.
Also tweak the code in inv_api.c so that fetches from pg_largeobject
explicitly verify that the length of the data field is not more than
LOBLKSIZE. Formerly we just had Asserts() for that, which is no protection
at all in production builds. In some of the call sites an overlength data
value would translate directly to a security-relevant stack clobber, so it
seems worth one extra runtime comparison to be sure.
In the back branches, we can't change the contents of pg_control; but we
can still make the extra checks in inv_api.c, which will offer some amount
of protection against running with the wrong value of LOBLKSIZE.
HeapTupleSatisfiesVacuum() didn't properly discern between
DELETE_IN_PROGRESS and INSERT_IN_PROGRESS for rows that have been
inserted in the current transaction and deleted in a aborted
subtransaction of the current backend. At the very least that caused
problems for CLUSTER and CREATE INDEX in transactions that had
aborting subtransactions producing rows, leading to warnings like:
WARNING: concurrent delete in progress within table "..."
possibly in an endless, uninterruptible, loop.
Instead of treating *InProgress xmins the same as *IsCurrent ones,
treat them as being distinct like the other visibility routines. As
implemented this separatation can cause a behaviour change for rows
that have been inserted and deleted in another, still running,
transaction. HTSV will now return INSERT_IN_PROGRESS instead of
DELETE_IN_PROGRESS for those. That's both, more in line with the other
visibility routines and arguably more correct. The latter because a
INSERT_IN_PROGRESS will make callers look at/wait for xmin, instead of
xmax.
The only current caller where that's possibly worse than the old
behaviour is heap_prune_chain() which now won't mark the page as
prunable if a row has concurrently been inserted and deleted. That's
harmless enough.
As a cautionary measure also insert a interrupt check before the gotos
in IndexBuildHeapScan() that lead to the uninterruptible loop. There
are other possible causes, like a row that several sessions try to
update and all fail, for repeated loops and the cost of doing so in
the retry case is low.
As this bug goes back all the way to the introduction of
subtransactions in 573a71a5da backpatch to all supported releases.
Reported-By: Sandro Santilli
As of Xcode 5.0, Apple isn't including the Python framework as part of the
SDK-level files, which means that linking to it might fail depending on
whether Xcode thinks you've selected a specific SDK version. According to
their Tech Note 2328, they've basically deprecated the framework method of
linking to libpython and are telling people to link to the shared library
normally. (I'm pretty sure this is in direct contradiction to the advice
they were giving a few years ago, but whatever.) Testing says that this
approach works fine at least as far back as OS X 10.4.11, so let's just
rip out the framework special case entirely. We do still need a special
case to decide that OS X provides a shared library at all, unfortunately
(I wonder why the distutils check doesn't work ...). But this is still
less of a special case than before, so it's fine.
Back-patch to all supported branches, since we'll doubtless be hearing
about this more as more people update to recent Xcode.
The original coding in contrib/uuid-ossp created and destroyed a uuid_t
object (or, in some cases, even two of them) each time it was called.
This is not the intended usage: you're supposed to keep the uuid_t object
around so that the library can cache its state across uses. (Other UUID
libraries seem to keep equivalent state behind-the-scenes in static
variables, but OSSP chose differently.) Aside from being quite inefficient,
creating a new uuid_t loses knowledge of the previously generated UUID,
which in theory could result in duplicate V1-style UUIDs being created
on sufficiently fast machines.
On at least some platforms, creating a new uuid_t also draws some entropy
from /dev/urandom, leaving less for the rest of the system. This seems
sufficiently unpleasant to justify back-patching this change.
This reverts commit ddf317fe0d.
It turns out that the %name-prefix syntax without "=" does not work
at all in pre-2.4 Bison. We are not prepared to make such a large
jump in minimum required Bison version just to suppress a warning
message in a version hardly any developers are using yet.
When 3.0 gets more popular, we'll figure out a way to deal with this.
In the meantime, BISONFLAGS=-Wno-deprecated is recommendable for
anyone using 3.0 who doesn't want to see the warning.
%name-prefix doesn't use an "=" sign according to the Bison docs, but it
silently accepted one anyway, until Bison 3.0. This was originally a
typo of mine in commit 012abebab1, and we
seem to have slavishly copied the error into all the other grammar files.
Per report from Vik Fearing; analysis by Peter Eisentraut.
Back-patch to all active branches, since somebody might try to build
a back branch with up-to-date tools.
In yesterday's commit 2dc4f011fd, I tried
to force buffering of stdout/stderr in initdb to be what it is by
default when the program is run interactively on Unix (since that's how
most manual testing is done). This tripped over the fact that Windows
doesn't support _IOLBF mode. We dealt with that a long time ago in
syslogger.c by falling back to unbuffered mode on Windows. Export that
solution in port.h and use it in initdb.
Back-patch to 8.4, like the previous commit.
The proc array can contain duplicate XIDs, when a transaction is just being
prepared for two-phase commit. To cope, remove any duplicates in
txid_current_snapshot(). Also ignore duplicates in the input functions, so
that if e.g. you have an old pg_dump file that already contains duplicates,
it will be accepted.
Report and fix by Jan Wieck. Backpatch to all supported versions.
To lock a prepared transaction's shared memory entry, we used to mark it
with the XID of the backend. When the XID was no longer active according
to the proc array, the entry was implicitly considered as not locked
anymore. However, when preparing a transaction, the backend's proc array
entry was cleared before transfering the locks (and some other state) to
the prepared transaction's dummy PGPROC entry, so there was a window where
another backend could finish the transaction before it was in fact fully
prepared.
To fix, rewrite the locking mechanism of global transaction entries. Instead
of an XID, just have simple locked-or-not flag in each entry (we store the
locking backend's backend id rather than a simple boolean, but that's just
for debugging purposes). The backend is responsible for explicitly unlocking
the entry, and to make sure that that happens, install a callback to unlock
it on abort or process exit.
Backpatch to all supported versions.
Since this program may print to either stdout or stderr, the relative
ordering of its messages depends on the buffering behavior of those files.
Force stdout to be line-buffered and stderr to be unbuffered, ensuring
that the behavior will match standard Unix interactive behavior, even
when stdout and stderr are rerouted to a file.
Per complaint from Tomas Vondra. The particular case he pointed out is
new in HEAD, but issues of the same sort could arise in any branch with
other error messages, so back-patch to all branches.
I'm unsure whether we might not want to do this in other client programs
as well. For the moment, just fix initdb.
The code expands a varbit gist leaf key to a node key by copying the bit
data twice in a varlen datum, as both the lower and upper key. The lower key
was expanded to INTALIGN size, but the padding bytes were not initialized.
That's a problem because when the lower/upper keys are compared, the padding
bytes are used compared too, when the values are otherwise equal. That could
lead to incorrect query results.
REINDEX is advised for any btree_gist indexes on bit or bit varying data
type, to fix any garbage padding bytes on disk.
Per Valgrind, reported by Andres Freund. Backpatch to all supported
versions.
Usually the search would find plain "tclsh" without any trouble,
but some installations might only have the version-numbered flavor
of that program.
No compatibility problems have been reported with 8.6, so we might
as well back-patch this to all active branches.
Christoph Berg
Back in 8.3, we installed permissions checks in these functions (see
commits 8bc225e799 and cc26599b72). But we forgot to document that
anywhere in the user-facing docs; it did get mentioned in the 8.3 release
notes, but nobody's looking at that any more. Per gripe from Suya Huang.
Commit 4318daecc9 broke it. The change in
sub-second precision at extreme dates is normal. The inconsistent
truncation vs. rounding is essentially a bug, albeit a longstanding one.
Back-patch to 8.4, like the causative commit.
To-be-deleted list pages contain no useful information, as they are being
deleted, but we must still protect the writes from being torn by a crash
after a partial write. To do that, re-initialize the pages on WAL replay.
Jeff Janes caught this with a test program to test partial writes.
Backpatch to all supported versions.
If the server sends a long stream of data, and the server + network are
consistently fast enough to force the recv() loop in pqReadData() to
iterate until libpq's input buffer is full, then upon processing the last
incomplete message in each bufferload we'd usually double the buffer size,
due to supposing that we didn't have enough room in the buffer to finish
collecting that message. After filling the newly-enlarged buffer, the
cycle repeats, eventually resulting in an out-of-memory situation (which
would be reported misleadingly as "lost synchronization with server").
Of course, we should not enlarge the buffer unless we still need room
after discarding already-processed messages.
This bug dates back quite a long time: pqParseInput3 has had the behavior
since perhaps 2003, getCopyDataMessage at least since commit 70066eb1a1
in 2008. Probably the reason it's not been isolated before is that in
common environments the recv() loop would always be faster than the server
(if on the same machine) or faster than the network (if not); or at least
it wouldn't be slower consistently enough to let the buffer ramp up to a
problematic size. The reported cases involve Windows, which perhaps has
different timing behavior than other platforms.
Per bug #7914 from Shin-ichi Morita, though this is different from his
proposed solution. Back-patch to all supported branches.
ActiveSnapshot needs to be set when we call ExecutorRewind because some
plan node types may execute user-defined functions during their ReScan
calls (nodeLimit.c does so, at least). The wisdom of that is somewhat
debatable, perhaps, but for now the simplest fix is to make sure the
required context is valid. Failure to do this typically led to a
null-pointer-dereference core dump, though it's possible that in more
complex cases a function could be executed with the wrong snapshot
leading to very subtle misbehavior.
Per report from Leif Jensen. It's been broken for a long time, so
back-patch to all active branches.
Commit 4318daecc9 introduced a test that
couldn't be made consistent between integer and floating-point
timestamps.
It was designed to test the longest possible interval output length,
so removing four zeros from the number of hours, as this patch does,
is not ideal. But the test still has some utility for its original
purpose, and there aren't a lot of other good options.
Noah Misch suggested a different approach where we test that the
output either matches what we expect from integer timestamps or what
we expect from floating-point timestamps. That seemed to obscure an
otherwise simple test, however.
Reviewed by Tom Lane and Noah Misch.
This was not changed in HEAD, but will be done later as part of a
pgindent run. Future pgindent runs will also do this.
Report by Tom Lane
Backpatch through all supported branches, but not HEAD
Commit fad153ec45 modified sinval.c to reduce
the number of calls into sinvaladt.c (which require taking a shared lock)
by keeping a local buffer of collected-but-not-yet-processed messages.
However, if processing of the last message in a batch resulted in a
recursive call to ReceiveSharedInvalidMessages, we could overwrite that
message with a new one while the outer invalidation function was still
working on it. This would be likely to lead to invalidation of the wrong
cache entry, allowing subsequent processing to use stale cache data.
The fix is just to make a local copy of each message while we're processing
it.
Spotted by Andres Freund. Back-patch to 8.4 where the bug was introduced.
If we have an array of records stored on disk, the individual record fields
cannot contain out-of-line TOAST pointers: the tuptoaster.c mechanisms are
only prepared to deal with TOAST pointers appearing in top-level fields of
a stored row. The same applies for ranges over composite types, nested
composites, etc. However, the existing code only took care of expanding
sub-field TOAST pointers for the case of nested composites, not for other
structured types containing composites. For example, given a command such
as
UPDATE tab SET arraycol = ARRAY[(ROW(x,42)::mycompositetype] ...
where x is a direct reference to a field of an on-disk tuple, if that field
is long enough to be toasted out-of-line then the TOAST pointer would be
inserted as-is into the array column. If the source record for x is later
deleted, the array field value would become a dangling pointer, leading
to errors along the line of "missing chunk number 0 for toast value ..."
when the value is referenced. A reproducible test case for this was
provided by Jan Pecek, but it seems likely that some of the "missing chunk
number" reports we've heard in the past were caused by similar issues.
Code-wise, the problem is that PG_DETOAST_DATUM() is not adequate to
produce a self-contained Datum value if the Datum is of composite type.
Seen in this light, the problem is not just confined to arrays and ranges,
but could also affect some other places where detoasting is done in that
way, for example form_index_tuple().
I tried teaching the array code to apply toast_flatten_tuple_attribute()
along with PG_DETOAST_DATUM() when the array element type is composite,
but this was messy and imposed extra cache lookup costs whether or not any
TOAST pointers were present, indeed sometimes when the array element type
isn't even composite (since sometimes it takes a typcache lookup to find
that out). The idea of extending that approach to all the places that
currently use PG_DETOAST_DATUM() wasn't attractive at all.
This patch instead solves the problem by decreeing that composite Datum
values must not contain any out-of-line TOAST pointers in the first place;
that is, we expand out-of-line fields at the point of constructing a
composite Datum, not at the point where we're about to insert it into a
larger tuple. This rule is applied only to true composite Datums, not
to tuples that are being passed around the system as tuples, so it's not
as invasive as it might sound at first. With this approach, the amount
of code that has to be touched for a full solution is greatly reduced,
and added cache lookup costs are avoided except when there actually is
a TOAST pointer that needs to be inlined.
The main drawback of this approach is that we might sometimes dereference
a TOAST pointer that will never actually be used by the query, imposing a
rather large cost that wasn't there before. On the other side of the coin,
if the field value is used multiple times then we'll come out ahead by
avoiding repeat detoastings. Experimentation suggests that common SQL
coding patterns are unaffected either way, though. Applications that are
very negatively affected could be advised to modify their code to not fetch
columns they won't be using.
In future, we might consider reverting this solution in favor of detoasting
only at the point where data is about to be stored to disk, using some
method that can drill down into multiple levels of nested structured types.
That will require defining new APIs for structured types, though, so it
doesn't seem feasible as a back-patchable fix.
Note that this patch changes HeapTupleGetDatum() from a macro to a function
call; this means that any third-party code using that macro will not get
protection against creating TOAST-pointer-containing Datums until it's
recompiled. The same applies to any uses of PG_RETURN_HEAPTUPLEHEADER().
It seems likely that this is not a big problem in practice: most of the
tuple-returning functions in core and contrib produce outputs that could
not possibly be toasted anyway, and the same probably holds for third-party
extensions.
This bug has existed since TOAST was invented, so back-patch to all
supported branches.
Since ruleutils.c recurses, it could be driven to stack overflow by
deeply nested constructs. Very large queries might also take long
enough to deparse that a check for interrupts seems like a good idea.
Stick appropriate tests into a couple of key places.
Noted by Greg Stark. Back-patch to all supported branches.
Some popen() calls were missing SYSTEMQUOTEs, which caused initdb and
pg_upgrade to fail on Windows, if the installation path contained both
spaces and @ signs.
Patch by Nikhil Deshpande. Backpatch to all supported versions.
In writeListPage, never take a full-page image of the page, because we
have all the information required to re-initialize in the WAL record
anyway. Before this fix, a full-page image was always generated, unless
full_page_writes=off, because when the page is initialized its LSN is
always 0. In stable-branches, keep the code to restore the backup blocks
if they exist, in case that the WAL is generated with an older minor
version, but in master Assert that there are no full-page images.
In the redo routine, add missing "off++". Otherwise the tuples are added
to the page in reverse order. That happens to be harmless because we
always scan and remove all the tuples together, but it was clearly wrong.
Also, it was masked by the first bug unless full_page_writes=off, because
the page was always restored from a full-page image.
Backpatch to all supported versions.
Once we've completed a PREPARE, our session is not running a transaction,
so its entry in pg_stat_activity should show xact_start as null, rather
than leaving the value as the start time of the now-prepared transaction.
I think possibly this oversight was triggered by faulty extrapolation
from the adjacent comment that says PrepareTransaction should not call
AtEOXact_PgStat, so tweak the wording of that comment.
Noted by Andres Freund while considering bug #10123 from Maxim Boguk,
although this error doesn't seem to explain that report.
Back-patch to all active branches.
Introduced in 585bca39: msgid is not used in the Windows code path.
Also adjust comments a tad (mostly to keep pgindent from messing it up).
David Rowley
Specifically, on-stack memset() might be removed, so:
* Replace memset() with px_memset()
* Add px_memset to copy_crlf()
* Add px_memset to pgp-s2k.c
Patch by Marko Kreen
Report by PVS-Studio
Backpatch through 8.4.
According to the Single Unix Spec and assorted man pages, you're supposed
to use the constants named AF_xxx when setting ai_family for a getaddrinfo
call. In a few places we were using PF_xxx instead. Use of PF_xxx
appears to be an ancient BSD convention that was not adopted by later
standardization. On BSD and most later Unixen, it doesn't matter much
because those constants have equivalent values anyway; but nonetheless
this code is not per spec.
In the same vein, replace PF_INET by AF_INET in one socket() call, which
wasn't even consistent with the other socket() call in the same function
let alone the remainder of our code.
Per investigation of a Cygwin trouble report from Marco Atzeri. It's
probably a long shot that this will fix his issue, but it's wrong in
any case.
Bind attempts to an LDAP server should time out after two seconds,
allowing additional lines in the service control file to be parsed
(which provide a fall back to a secondary LDAP server or default options).
The existing code failed to enforce that timeout during TCP connect,
resulting in a hang far longer than two seconds if the LDAP server
does not respond.
Laurenz Albe
I mixed up BLCKSZ and XLOG_BLCKSZ when I changed the way the buffer is
allocated a couple of weeks ago. With the default settings, they are both
8k, but they can be changed at compile-time.
Formerly, we set up the postmaster's signal handling only when we were
about to start launching subprocesses. This is a bad idea though, as
it means that for example a SIGINT arriving before that will kill the
postmaster instantly, perhaps leaving lockfiles, socket files, shared
memory, etc laying about. We'd rather that such a signal caused orderly
postmaster termination including releasing of those resources. A simple
fix is to move the PostmasterMain stanza that initializes signal handling
to an earlier point, before we've created any such resources. Then, an
early-arriving signal will be blocked until we're ready to deal with it
in the usual way. (The only part that really needs to be moved up is
blocking of signals, but it seems best to keep the signal handler
installation calls together with that; for one thing this ensures the
kernel won't drop any signals we wished to get. The handlers won't get
invoked in any case until we unblock signals in ServerLoop.)
Per a report from MauMau. He proposed changing the way "pg_ctl stop"
works to deal with this, but that'd just be masking one symptom not
fixing the core issue.
It's been like this since forever, so back-patch to all supported branches.
Tom Lane
Peter Eisentraut
Alvaro Herrera
Magnus Hagander
Fujii Masao
Noah Misch
Andres Freund
Heikki Linnakangas
Jeff Davis
Bruce Momjian