This is more in keeping with modern practice, and is a first step towards
porting to Win64 (which has sizeof(pointer) > sizeof(long)).
Tsutomu Yamada, Magnus Hagander, Tom Lane
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
in a subtransaction stays open even if the subtransaction is aborted, so
any temporary files related to it must stay alive as well. With the patch,
we use ResourceOwners to track open temporary files and don't automatically
close them at subtransaction end (though in the normal case temporary files
are registered with the subtransaction resource owner and will therefore be
closed).
At end of top transaction, we still check that there's no temporary files
marked as close-at-end-of-transaction open, but that's now just a debugging
cross-check as the resource owner cleanup should've closed them already.
via the "flat files" facility. This requires making it enough like a backend
to be able to run transactions; it's no longer an "auxiliary process" but
more like the autovacuum worker processes. Also, its signal handling has
to be brought into line with backends/workers. In particular, since it
now has to handle procsignal.c processing, the special autovac-launcher-only
signal conditions are moved to SIGUSR2.
Alvaro, with some cleanup from Tom
To make this work in the base case, pg_database now has a nailed-in-cache
relation descriptor that is initialized using hardwired knowledge in
relcache.c. This means pg_database is added to the set of relations that
need to have a Schema_pg_xxx macro maintained in pg_attribute.h. When this
path is taken, we'll have to do a seqscan of pg_database to find the row
we need.
In the normal case, we are able to do an indexscan to find the database's row
by name. This is made possible by storing a global relcache init file that
describes only the shared catalogs and their indexes (and therefore is usable
by all backends in any database). A new backend loads this cache file,
finds its database OID after an indexscan on pg_database, and then loads
the local relcache init file for that database.
This change should effectively eliminate number of databases as a factor
in backend startup time, even with large numbers of databases. However,
the real reason for doing it is as a first step towards getting rid of
the flat files altogether. There are still several other sub-projects
to be tackled before that can happen.
fsync() fails, say "file" rather than "relation" when printing the filename.
This makes messages that display block numbers a bit confusing. For example,
in message 'could not read block 150000 of file "base/1234/5678.1"', 150000
is the block number from the beginning of the relation, ie. segment 0, not
150000th block within that segment. Per discussion, users aren't usually
interested in the exact location within the file, so we can live with that.
To ease constructing error messages, add FilePathName(File) function to
return the pathname of a virtual fd.
This patch gets us out from under the Unix limitation of two user-defined
signal types. We already had done something similar for signals directed to
the postmaster process; this adds multiplexing for signals directed to
backends and auxiliary processes (so long as they're connected to shared
memory).
As proof of concept, replace the former usage of SIGUSR1 and SIGUSR2
for backends with use of the multiplexing mechanism. There are still some
hard-wired definitions of SIGUSR1 and SIGUSR2 for other process types,
but getting rid of those doesn't seem interesting at the moment.
Fujii Masao
we should ignore NULL array entries, not non-NULL ones. This had the
effect of disabling commit_delay, and could have caused a crash in the
rare race condition the patch was intended to fix.
Bug report and diagnosis by Jeff Janes, in bug #4952.
archive recovery. Invent a separate state variable and inquiry function
for XLogInsertAllowed() to clarify some tests and make the management of
writing the end-of-recovery checkpoint less klugy. Fix several places
that were incorrectly testing InRecovery when they should be looking at
RecoveryInProgress or XLogInsertAllowed (because they will now be executed
in the bgwriter not startup process). Clarify handling of bad LSNs passed
to XLogFlush during recovery. Use a spinlock for setting/testing
SharedRecoveryInProgress. Improve quite a lot of comments.
Heikki and Tom
during it:
When bgwriter is active, the startup process can't perform mdsync() correctly
because it won't see the fsync requests accumulated in bgwriter's private
pendingOpsTable. Therefore make bgwriter responsible for the end-of-recovery
checkpoint as well, when it's active.
When bgwriter is active (= archive recovery), the startup process must not
accumulate fsync requests to its own pendingOpsTable, since bgwriter won't
see them there when it performs restartpoints. Make startup process drop its
pendingOpsTable when bgwriter is launched to avoid that.
Update minimum recovery point one last time when leaving archive recovery.
It won't be updated by the end-of-recovery checkpoint because XLogFlush()
sees us as out of recovery already.
This fixes bug #4879 reported by Fujii Masao.
of the 256KB limit originally enforced by a patch committed 2008-11-06.
Per recent test results, the smaller size resulted in an undesirable decrease
in bulk data loading speed, due to COPY processing frequently getting blocked
for WAL flushing. This area might need more tweaking later, but this setting
seems to be good enough for 8.4.
copies?) to ensure they really don't run proc_exit/shmem_exit callbacks,
as was intended. I broke this behavior recently by installing atexit
callbacks without thinking about the one case where we truly don't want
to run those callback functions. Noted in an example from Dave Page.
will still be performed if something in a backend process calls exit()
directly, instead of going through proc_exit() as we prefer. This is a second
response to the issue that we might load third-party code that doesn't know it
should not call exit(). Such a call will now cause a reasonably graceful
backend shutdown, if possible. (Of course, if the reason for the exit() call
is out-of-memory or some such, we might not be able to recover, but at least
we will try.)
a backend has done exit(0) or exit(1) without having disengaged itself
from shared memory. We are at risk for this whenever third-party code is
loaded into a backend, since such code might not know it's supposed to go
through proc_exit() instead. Also, it is reported that under Windows
there are ways to externally kill a process that cause the status code
returned to the postmaster to be indistinguishable from a voluntary exit
(thank you, Microsoft). If this does happen then the system is probably
hosed --- for instance, the dead session might still be holding locks.
So the best recovery method is to treat this like a backend crash.
The dead man switch is armed for a particular child process when it
acquires a regular PGPROC, and disarmed when the PGPROC is released;
these should be the first and last touches of shared memory resources
in a backend, or close enough anyway. This choice means there is no
coverage for auxiliary processes, but I doubt we need that, since they
shouldn't be executing any user-provided code anyway.
This patch also improves the management of the EXEC_BACKEND
ShmemBackendArray array a bit, by reducing search costs.
Although this problem is of long standing, the lack of field complaints
seems to mean it's not critical enough to risk back-patching; at least
not till we get some more testing of this mechanism.
when we are waiting for old snapshots to go away during a concurrent index
build. In particular, this rule lets us avoid waiting for
idle-in-transaction sessions.
This logic could be improved further if we had some way to wake up when
the session we are currently waiting for goes idle-in-transaction. However
that would be a significantly more complex/invasive patch, so it'll have to
wait for some other day.
Simon Riggs, with some improvements by Tom.
try to protect an already-existing buffer from being evicted. This was
left as an open issue when the posix_fadvise patch was committed. I'm
not sure there's any evidence to justify more work in this area, but we
should have some record about it in the source code.
temp relations; this is no more expensive than before, now that we have
pg_class.relistemp. Insert tests into bufmgr.c to prevent attempting
to fetch pages from nonlocal temp relations. This provides a low-level
defense against bugs-of-omission allowing temp pages to be loaded into shared
buffers, as in the contrib/pgstattuple problem reported by Stuart Bishop.
While at it, tweak a bunch of places to use new relcache tests (instead of
expensive probes into pg_namespace) to detect local or nonlocal temp tables.
at the same instant as a new backend is spawned. Since CountActiveBackends()
doesn't hold ProcArrayLock, it needs to be prepared for the case that a
pointer at the end of the proc array is still NULL even though numProcs says
it should be valid, since it doesn't hold ProcArrayLock. Backpatch to 8.1.
8.0 and earlier had this right, but it was broken in the split of PGPROC and
sinval shared memory arrays.
Per report and proposal by Marko Kreen.
probes --- the BUFFER_READ_DONE probe provides the same information and more
besides. Expand the LOCK_WAIT_START/DONE probe arguments so that there's
actually some chance of telling what is being waited for. Update and
clean up the documentation.
DTrace probes, so that ordinary reads can be distinguished from relation
extension operations. Move buffer_read_start probe to before the
smgrnblocks() call that's needed in the isExtend case, since really that step
should be charged as part of the time needed for the extension operation.
(This makes it slightly harder to match the read_start with the associated
read_done, since now you can't match them on blockNumber, but it should still
be possible since isExtend operations on the same relation can never be
interleaved.) Per recent discussion.
In passing, add the page identity (forkNum/blockNum) to the parameters of the
buffer_flush_start/buffer_flush_done probes, which were unaccountably lacking
the info.
make it include the time for the possible smgropen() call, but that
results in a null pointer dereference :-(.
An alternative solution would be to fetch the buffer tag instead of
looking at *reln, but I'll just put it back as it was for the moment.
BTW, this indicates that DTrace probes evaluate their arguments even
when nominally inactive. What was that about "zero cost", again?
some bufmgr probes, take out redundant and memory-leak-inducing path arguments
to smgr__md__read__done and smgr__md__write__done, fix bogus attempt to
recalculate space used in sort__done, clean up formatting in places where
I'm not sure pgindent will do a nice job by itself.
its usual buffer cleaning duties during archive recovery, and it's responsible
for performing restartpoints.
This requires some changes in postmaster. When the startup process has done
all the initialization and is ready to start WAL redo, it signals the
postmaster to launch the background writer. The postmaster is signaled again
when the point in recovery is reached where we know that the database is in
consistent state. Postmaster isn't interested in that at the moment, but
that's the point where we could let other backends in to perform read-only
queries. The postmaster is signaled third time when the recovery has ended,
so that postmaster knows that it's safe to start accepting connections.
The startup process now traps SIGTERM, and performs a "clean" shutdown. If
you do a fast shutdown during recovery, a shutdown restartpoint is performed,
like a shutdown checkpoint, and postmaster kills the processes cleanly. You
still have to continue the recovery at next startup, though.
Currently, the background writer is only launched during archive recovery.
We could launch it during crash recovery as well, but it seems better to keep
that codepath as simple as possible, for the sake of robustness. And it
couldn't do any restartpoints during crash recovery anyway, so it wouldn't be
that useful.
log_restartpoints is gone. Use log_checkpoints instead. This is yet to be
documented.
This whole operation is a pre-requisite for Hot Standby, but has some value of
its own whether the hot standby patch makes 8.4 or not.
Simon Riggs, with lots of modifications by me.
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
GUC variable effective_io_concurrency controls how many concurrent block
prefetch requests will be issued.
(The best way to handle this for plain index scans is still under debate,
so that part is not applied yet --- tgl)
Greg Stark
initialization, to give loadable modules a reasonable place to perform
creation of any shared memory areas they need. This is the logical conclusion
of our previous creation of RequestAddinShmemSpace() and RequestAddinLWLocks().
We don't need an explicit shmem_shutdown_hook, because the existing
on_shmem_exit and on_proc_exit mechanisms serve that need.
Also, adjust SubPostmasterMain so that libraries that got loaded into the
postmaster will be loaded into all child processes, not only regular backends.
This improves consistency with the non-EXEC_BACKEND behavior, and might be
necessary for functionality for some types of add-ons.
includes a few new ones.
- Fixed compilation errors on OS X for probes that use typedefs
- Fixed a number of probes to pass ForkNumber per the relation forks
patch
- The new probes are those that were taken out from the previous
submitted patch and required simple fixes. Will submit the other probes
that may require more discussion in a separate patch.
Robert Lor
right child if it doesn't need to. This saves some miniscule number
of cycles, but the ulterior motive is to avoid an optimization bug
known to exist in SCO's C compiler (and perhaps others?)
replication patch needs a signal, but we've already used SIGUSR1 and
SIGUSR2 in normal backends. This patch allows reusing SIGUSR1 for that,
and for other purposes too if the need arises.
non-writable large objects need to have their snapshots registered on the
transaction resowner, not the current portal's, because it must persist until
the large object is closed (which the portal does not). Also, ensure that the
serializable snapshot is recorded by the transaction resource owner too, even
when a subtransaction has changed the current resource owner before
serializable is taken.
Per bug reports from Pavan Deolasee.
truncations in FSM code, call FreeSpaceMapTruncateRel from smgr_redo. To
make that cleaner from modularity point of view, move the WAL-logging one
level up to RelationTruncate, and move RelationTruncate and all the
related WAL-logging to new src/backend/catalog/storage.c file. Introduce
new RelationCreateStorage and RelationDropStorage functions that are used
instead of calling smgrcreate/smgrscheduleunlink directly. Move the
pending rel deletion stuff from smgrcreate/smgrscheduleunlink to the new
functions. This leaves smgr.c as a thin wrapper around md.c; all the
transactional stuff is now in storage.c.
This will make it easier to add new forks with similar truncation logic,
like the visibility map.
"base/11517/3767_fsm", instead of symbolic names like "1663/11517/3767/1",
per Alvaro's suggestion. I didn't change the messages in the higher-level
index, heap and FSM routines, though, where the fork is implicit.
(but not locked, as that would risk deadlocks). Also, make it work in a small
ring of buffers to avoid having bulk inserts trash the whole buffer arena.
Robert Haas, after an idea of Simon Riggs'.
allowed different processes to have different addresses for the shmem segment
in quite a long time, but there were still a few places left that used the
old coding convention. Clean them up to reduce confusion and improve the
compiler's ability to detect pointer type mismatches.
Kris Jurka
and heap_deformtuple in favor of the newer functions heap_form_tuple et al
(which do the same things but use bool control flags instead of arbitrary
char values). Eliminate the former duplicate coding of these functions,
reducing the deprecated functions to mere wrappers around the newer ones.
We can't get rid of them entirely because add-on modules probably still
contain many instances of the old coding style.
Kris Jurka
on non-full-page-image WAL records, and quite arbitrarily, only if there's
less than 20% free space on the page after the insert/update (not on HOT
updates, though). The 20% cutoff should avoid most of the overhead, when
replaying a bulk insertion, for example, while ensuring that pages that
are full are marked as full in the FSM.
This is mostly to avoid the nasty worst case scenario, where you replay
from a PITR archive, and the FSM information in the base backup is really
out of date. If there was a lot of pages that the outdated FSM claims to
have free space, but don't actually have any, the first unlucky inserter
after the recovery would traverse through all those pages, just to find
out that they're full. We didn't have this problem with the old FSM
implementation, because we simply threw the FSM information away on a
non-clean shutdown.
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
there are FD_XACT_TEMPORARY files to clean up at transaction end.
Per performance profiling results on AWeber's huge systems.
Patch by me after an idea suggested by Simon Riggs.
of multiple forks, and each fork can be created and grown separately.
The bulk of this patch is about changing the smgr API to include an extra
ForkNumber argument in every smgr function. Also, smgrscheduleunlink and
smgrdounlink no longer implicitly call smgrclose, because other forks might
still exist after unlinking one. The callers of those functions have been
modified to call smgrclose instead.
This patch in itself doesn't have any user-visible effect, but provides the
infrastructure needed for upcoming patches. The additional forks envisioned
are a rewritten FSM implementation that doesn't rely on a fixed-size shared
memory block, and a visibility map to allow skipping portions of a table in
VACUUM that have no dead tuples.
PageHeaderIsValid when we zero the buffer instead of reading the page in.
The actual performance improvement is probably marginal since this function
isn't very heavily used, but a cycle saved is a cycle earned.
Zdenek Kotala
or target database is being accessed by other users, it tells you whether
the "other users" are live sessions or uncommitted prepared transactions.
(Indeed, it tells you exactly how many of each, but that's mostly just
because it was easy to do so.) This should help forestall the gotcha of
not realizing that a prepared transaction is what's blocking the command.
Per discussion.
rewrite. When called from SIInsertDataEntries, SICleanupQueue releases
the write lock if it has to issue a kill() to signal some laggard backend.
That still seems like a good idea --- but it's possible that by the time
we get the lock back, there are no longer enough free message slots to
satisfy SIInsertDataEntries' requirement. Must recheck, and repeat the
whole SICleanupQueue process if not. Noted while reading code.
thereby forestalling any problems with alignment of the data structure placed
there. Since SizeOfPageHeaderData is maxalign'd anyway in 8.3 and HEAD, this
does not actually change anything right now, but it is foreseeable that the
header size will change again someday. I had to fix a couple of places that
were assuming that the content offset is just SizeOfPageHeaderData rather than
MAXALIGN(SizeOfPageHeaderData). Per discussion of Zdenek's page-macros patch.
SizeOfPageHeaderData instead of sizeof(PageHeaderData) in places where that
makes the code clearer, and avoid casting between Page and PageHeader where
possible. Zdenek Kotala, with some additional cleanup by Heikki Linnakangas.
I did not apply the parts of the proposed patch that would have resulted in
slightly changing the on-disk format of hash indexes; it seems to me that's
not a win as long as there's any chance of having in-place upgrade for 8.4.
CopySnapshot, per Neil Conway. Also add a comment about the assumption in
GetSnapshotData that the argument is statically allocated.
Also, fix some more typos in comments in snapmgr.c.
backend. If so, send a LOG message to the postmaster log, and if the table
is beyond the vacuum-for-wraparound horizon, forcibly drop it. Per recent
discussions. Perhaps we ought to back-patch this, but it probably needs
to age a bit in HEAD first.
read and written without a lock. The value itself is atomic, sure, but on
processors with weak memory ordering it's possible for a reader to see the
value change before it sees the associated message written into the buffer
array. Fix by introducing a spinlock that's used just to read and write
maxMsgNum. (We could do this with less overhead if we recognized a concept
of "memory access barrier"; is it worth introducing such a thing? At the
moment probably not --- I can't measure any clear slowdown from adding the
spinlock, so this solution is probably fine.) Per buildfarm results.
unnecessary cache resets. The major changes are:
* When the queue overflows, we only issue a cache reset to the specific
backend or backends that still haven't read the oldest message, rather
than resetting everyone as in the original coding.
* When we observe backend(s) falling well behind, we signal SIGUSR1
to only one backend, the one that is furthest behind and doesn't already
have a signal outstanding for it. When it finishes catching up, it will
in turn signal SIGUSR1 to the next-furthest-back guy, if there is one that
is far enough behind to justify a signal. The PMSIGNAL_WAKEN_CHILDREN
mechanism is removed.
* We don't attempt to clean out dead messages after every message-receipt
operation; rather, we do it on the insertion side, and only when the queue
fullness passes certain thresholds.
* Split SInvalLock into SInvalReadLock and SInvalWriteLock so that readers
don't block writers nor vice versa (except during the infrequent queue
cleanout operations).
* Transfer multiple sinval messages for each acquisition of a read or
write lock.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
more logical that way, and also it reduces the amount of unnecessary includes
in bufpage.h, which is widely used.
Zdenek Kotala.
My previous patch to bufpage.h should also have credited him as author, but I
forgot (sorry about that).
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
support for a nonsegmented mode from md.c. Per recent discussions, there
doesn't seem to be much value in a "never segment" option as opposed to
segmenting with a suitably large segment size. So instead provide a
configure-time switch to set the desired segment size in units of gigabytes.
While at it, expose a configure switch for BLCKSZ as well.
Zdenek Kotala
place to prevent reusing relation OIDs before next checkpoint, and DROP
DATABASE. First, if a database was dropped, bgwriter would still try to unlink
the files that the rmtree() call by the DROP DATABASE command has already
deleted, or is just about to delete. Second, if a database is dropped, and
another database is created with the same OID, bgwriter would in the worst
case delete a relation in the new database that happened to get the same OID
as a dropped relation in the old database.
To fix these race conditions:
- make rmtree() ignore ENOENT errors. This fixes the 1st race condition.
- make ForgetDatabaseFsyncRequests forget unlink requests as well.
- force checkpoint on in dropdb on all platforms
Since ForgetDatabaseFsyncRequests() is asynchronous, the 2nd change isn't
enough on its own to fix the problem of dropping and creating a database with
same OID, but forcing a checkpoint on DROP DATABASE makes it sufficient.
Per Tom Lane's bug report and proposal. Backpatch to 8.3.
corrupted. (Neither is very important if SIGTERM is used to shut down the
whole database cluster together, but there's a problem if someone tries to
SIGTERM individual backends.) To do this, introduce new infrastructure
macros PG_ENSURE_ERROR_CLEANUP/PG_END_ENSURE_ERROR_CLEANUP that take care
of transiently pushing an on_shmem_exit cleanup hook. Also use this method
for createdb cleanup --- that wasn't a shared-memory-corruption problem,
but SIGTERM abort of createdb could leave orphaned files lying around.
Backpatch as far as 8.2. The shmem corruption cases don't exist in 8.1,
and the createdb usage doesn't seem important enough to risk backpatching
further.
systable_endscan_ordered that have API similar to systable_beginscan etc
(in particular, the passed-in scankeys have heap not index attnums),
but guarantee ordered output, unlike the existing functions. For the moment
these are just very thin wrappers around index_beginscan/index_getnext/etc.
Someday they might need to get smarter; but for now this is just a code
refactoring exercise to reduce the number of direct callers of index_getnext,
in preparation for changing that function's API.
In passing, remove index_getnext_indexitem, which has been dead code for
quite some time, and will have even less use than that in the presence
of run-time-lossy indexes.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
query texts only to the server log. This eliminates the issue of possible
leaking of security-sensitive data in other sessions' queries. Since the
log is presumed secure, we can now log the queries of all sessions involved
in the deadlock, whether or not they belong to the same user as the one
reporting the failure.
(if they'd be visible to the current user in pg_stat_activity).
This might look like it's subject to race conditions, but it's actually
pretty safe because at the time DeadLockReport() is constructing the
report, we haven't yet aborted our transaction and so we can expect that
everyone else involved in the deadlock is still blocked on some lock.
(There are corner cases where that might not be true, such as a statement
timeout triggering in another backend before we finish reporting; but at
worst we'd report a misleading activity string, so it seems acceptable
considering the usefulness of reporting the queries.)
Original patch by Itagaki Takahiro, heavily modified by me.
support DTrace in the future.
Switch from using DTRACE_PROBEn macros to the dynamically generated macros.
Use "dtrace -h" to create a header file that contains the dynamically
generated macros to be used in the source code instead of the DTRACE_PROBEn
macros. A dummy header file is generated for builds without DTrace support.
Author: Robert Lor <Robert.Lor@sun.com>
deals with the queue, including locking etc, is all in sinvaladt.c. This means
that the struct definition of the queue, and the queue pointer, are now
internal "implementation details" inside sinvaladt.c.
Per my proposal dated 25-Jun-2007 and followup discussion.
before it goes groveling through the ProcArray. In situations where the same
recently-committed transaction ID is checked repeatedly by tqual.c, this saves
a lot of shared-memory searches. And it's cheap enough that it shouldn't
hurt noticeably when it doesn't help.
Concept and patch by Simon, some minor tweaking and comment-cleanup by Tom.
than dividing them into 1GB segments as has been our longtime practice. This
requires working support for large files in the operating system; at least for
the time being, it won't be the default.
Zdenek Kotala
temporary table; we can't support that because there's no way to clean up the
source backend's internal state if the eventual COMMIT PREPARED is done by
another backend. This was checked correctly in 8.1 but I broke it in 8.2 :-(.
Patch by Heikki Linnakangas, original trouble report by John Smith.
"struct varlena" would be at least word-aligned. Per buildfarm results
from gypsy_moth. I did a little bit of trawling for other instances of
this coding pattern, and didn't find any; but if we turn up any more
of them I think we'd better revert the "char [4]" patch and find another
way of making tuptoaster.c alignment-safe.
erroring out of a wait. We can use a PG_TRY block for this, but add a comment
explaining why it'd be a bad idea to use it for any other state cleanup.
Back-patch to 8.2. Prior releases had the same issue, but only with respect
to the process title, which is likely to get reset almost immediately anyway
after the transaction aborts, so it seems not worth changing them. In 8.2
and HEAD, the pg_stat_activity "waiting" flag could remain set incorrectly
for a long time.
Per report from Gurjeet Singh.
whether to execute an immediate interrupt, rather than testing whether
LockWaitCancel() cancelled a lock wait. The old way misclassified the case
where we were blocked in ProcWaitForSignal(), and arguably would misclassify
any other future additions of new ImmediateInterruptOK states too. This
allows reverting the old kluge that gave LockWaitCancel() a return value,
since no callers care anymore. Improve comments in the various
implementations of PGSemaphoreLock() to explain that on some platforms, the
assumption that semop() exits after a signal is wrong, and so we must ensure
that the signal handler itself throws elog if we want cancel or die interrupts
to be effective. Per testing related to bug #3883, though this patch doesn't
solve those problems fully.
Perhaps this change should be back-patched, but since pre-8.3 branches aren't
really relying on autovacuum to respond to SIGINT, it doesn't seem critical
for them.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
checkpoint. This guards against an unlikely data-loss scenario in which
we re-use the relfilenode, then crash, then replay the deletion and
recreation of the file. Even then we'd be OK if all insertions into the
new relation had been WAL-logged ... but that's not guaranteed given all
the no-WAL-logging optimizations that have recently been added.
Patch by Heikki Linnakangas, per a discussion last month.
enabled) and autovacuum is on. Since there will be a steady stream of autovac
worker processes exiting and dropping gmon.out files, allowing them to make
separate subdirectories results in serious bloat; and it seems unlikely that
anyone will care about those profiles anyway. Limit the damage by forcing all
autovac workers to dump in one subdirectory, PGDATA/gprof/avworker/.
Per report from Jrg Beyer and subsequent discussion.
having several of them. Add two more flags: whether the process is
executing an ANALYZE, and whether a vacuum is for Xid wraparound (which
is obviously only set by autovacuum).
Sneakily move the worker's recently-acquired PostAuthDelay to a more useful
place.
bgwriter_lru_maxpages is exceeded leaves the loop variables in the
expected state. In the original coding, we'd fail to advance
next_to_clean, causing that buffer to be probably-uselessly rechecked next
time, and also have an off-by-one idea of the number of buffers scanned.
buffers that cannot possibly need to be cleaned, and estimates how many
buffers it should try to clean based on moving averages of recent allocation
requests and density of reusable buffers. The patch also adds a couple
more columns to pg_stat_bgwriter to help measure the effectiveness of the
bgwriter.
Greg Smith, building on his own work and ideas from several other people,
in particular a much older patch from Itagaki Takahiro.
later than latestCompletedXid, per Florian Pflug. Also some minor
improvements in the XIDCACHE_DEBUG code --- make sure each call of
TransactionIdIsInProgress is counted one way or another.
unpruned XMAX in its header. At the cost of 4 bytes per page, this keeps us
from performing heap_page_prune when there's no chance of pruning anything.
Seems to be necessary per Heikki's preliminary performance testing.
For XIDs of our own transaction and subtransactions, it's cheaper to ask
TransactionIdIsCurrentTransactionId() than to look in shared memory.
Also, the xids[] work array is always the same size within any given
process, so malloc it just once instead of doing a palloc/pfree on every
call; aside from being faster this lets us get rid of some goto's, since
we no longer have any end-of-function pfree to do. Both ideas by Heikki.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
than two independent bits (one of which was never used in heap pages anyway,
or at least hadn't been in a very long time). This gives us flexibility to
add the HOT notions of redirected and dead item pointers without requiring
anything so klugy as magic values of lp_off and lp_len. The state values
are chosen so that for the states currently in use (pre-HOT) there is no
change in the physical representation.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
no need for serialization against snapshot-taking because the xact doesn't
affect anyone else's snapshot anyway. Per discussion. Also, move various
info about the interlocking of transactions and snapshots out of code comments
and into a hopefully-more-cohesive discussion in access/transam/README.
Also, remove a couple of now-obsolete comments about having to force some WAL
to be written to persuade RecordTransactionCommit to do its thing.
that examine fields that could change under them. This is just to make
really sure that when we are fetching a value 'only once', that's what
actually happens. Possibly this is a bug that should be back-patched,
but in the absence of solid evidence that it's needed, I won't bother.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
even if the "deadlock detected" ERROR message is suppressed by an exception
catcher. Be clearer about the event sequence when a soft deadlock is fixed:
the fixing process might or might not still have to wait, so log that
separately. Fix race condition when someone releases us from the lock partway
through printing all this junk --- we'd not get confused about our state, but
the log message sequence could have been misleading, ie, a "still waiting"
message with no subsequent "acquired" message. Greg Stark and Tom Lane.
with the recent patch to log temp file sizes at removal time. Doesn't seem
worth fixing since it's unused.
In passing, make a few elog messages conform to the message style guide.
named pg_toast_temp_nnn, alongside the pg_temp_nnn schemas used for the temp
tables themselves. This allows low-level code such as the relcache to
recognize that these tables are indeed temporary, which enables various
optimizations such as not WAL-logging changes and using local rather than
shared buffers for access. Aside from obvious performance benefits, this
provides a solution to bug #3483, in which other backends unexpectedly held
open file references to temporary tables. The scheme preserves the property
that TOAST tables are not in any schema that's normally in the search path,
so they don't conflict with user table names.
initdb forced because of changes in system view definitions.
truncated relation was deleted later in the WAL sequence. Since replay
normally auto-creates a relation upon its first reference by a WAL log entry,
failure is seen only if the truncate entry happens to be the first reference
after the checkpoint we're restarting from; which is a pretty unusual case but
of course not impossible. Fix by making truncate entries auto-create like
the other ones do. Per report and test case from Dharmendra Goyal.
we don't know at that point which relation OID to tell pgstat to forget.
The code was passing the relfilenode, which is incorrect, and could possibly
cause some other relation's stats to be zeroed out. While we could try to
clean this up, it seems much simpler and more reliable to let the next
invocation of pgstat_vacuum_tabstat() fix things; which indeed is how it
worked before I introduced the buggy code into 8.1.3 and later :-(.
Problem noticed by Itagaki Takahiro, fix is per subsequent discussion.
checkpoint. The comment claimed that we could do this anytime after
setting the checkpoint REDO point, but actually BufferSync is relying
on the assumption that buffers dumped by other backends will be fsync'd
too. So we really could not do it any sooner than we are doing it.
continue with the schedule. Change current uses of SIGINT to abort a worker
into SIGTERM, which keeps the old behaviour of terminating the process.
Patch from ITAGAKI Takahiro, with some editorializing of my own.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
test seems inessential right now since the only control path for not
getting the lock is via CHECK_FOR_INTERRUPTS which won't return control
to ProcSleep, but it would be important if we ever allow the deadlock
code to kill someone else's transaction instead of our own.
within a signal handler (this might be safe given the relatively narrow code
range in which the interrupt is enabled, but it seems awfully risky); do issue
more informative log messages that tell what is being waited for and the exact
length of the wait; minor other code cleanup. Greg Stark and Tom Lane
which is the only state in which it's safe to initiate database queries.
It turns out that all but two of the callers thought that's what it meant;
and the other two were using it as a proxy for "will GetTopTransactionId()
return a nonzero XID"? Since it was in fact an unreliable guide to that,
make those two just invoke GetTopTransactionId() always, then deal with a
zero result if they get one.
for each temp file, rather than once per sort or hashjoin; this allows
spreading the data of a large sort or join across multiple tablespaces.
(I remain dubious that this will make any difference in practice, but certain
people insisted.) Arrange to cache the results of parsing the GUC variable
instead of recomputing from scratch on every demand, and push usage of the
cache down to the bottommost fd.c level.
tablespace(s) in which to store temp tables and temporary files. This is a
list to allow spreading the load across multiple tablespaces (a random list
element is chosen each time a temp object is to be created). Temp files are
not stored in per-database pgsql_tmp/ directories anymore, but per-tablespace
directories.
Jaime Casanova and Albert Cervera, with review by Bernd Helmle and Tom Lane.
wrong data when dumping a bufferload that crosses a component-file boundary.
This probably has not been seen in the wild because (a) component files are
normally 1GB apiece and (b) non-block-aligned buffer usage is relatively
rare. But it's fairly easy to reproduce a problem if one reduces RELSEG_SIZE
in a test build. Kudos to Kurt Harriman for spotting the bug.
will exit before failing because of conflicting DB usage. Per discussion,
this seems a good idea to help mask the fact that backend exit takes nonzero
time. Remove a couple of thereby-obsoleted sleeps in contrib and PL
regression test sequences.
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
ReadOrZeroBuffer to fetch pages from beyond physical EOF. This would
usually work, but would cause problems for md.c if writes occurred
beyond a segment boundary when the previous segment file hadn't been
fully extended.
from the WAL data, don't bother to physically read it; just have bufmgr.c
return a zeroed-out buffer instead. This speeds recovery significantly,
and also avoids unnecessary failures when a page-to-be-overwritten has corrupt
page headers on disk. This replaces a former kluge that accomplished the
latter by pretending zero_damaged_pages was always ON during WAL recovery;
which was OK when the kluge was put in, but is unsafe when restoring a WAL
log that was written with full_page_writes off.
Heikki Linnakangas
processes to be running simultaneously. Also, now autovacuum processes do not
count towards the max_connections limit; they are counted separately from
regular processes, and are limited by the new GUC variable
autovacuum_max_workers.
The launcher now has intelligence to launch workers on each database every
autovacuum_naptime seconds, limited only on the max amount of worker slots
available.
Also, the global worker I/O utilization is limited by the vacuum cost-based
delay feature. Workers are "balanced" so that the total I/O consumption does
not exceed the established limit. This part of the patch was contributed by
ITAGAKI Takahiro.
Per discussion.
fast flow of new fsync requests can prevent mdsync() from ever completing.
This was an unforeseen consequence of a patch added in Mar 2006 to prevent
the fsync request queue from overflowing. Problem identified by Heikki
Linnakangas and independently by ITAGAKI Takahiro; fix based on ideas from
Takahiro-san, Heikki, and Tom.
Back-patch as far as 8.1 because a previous back-patch introduced the problem
into 8.1 ...
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
are in their commit critical sections via flags in the ProcArray. Checkpoint
can watch the ProcArray to determine when it's safe to proceed. This is
a considerably better solution to the original problem of race conditions
between checkpoint and transaction commit: it speeds up commit, since there's
one less lock to fool with, and it prevents the problem of checkpoint being
delayed indefinitely when there's a constant flow of commits. Heikki, with
some kibitzing from Tom.
pointer" in every Snapshot struct. This allows removal of the case-by-case
tests in HeapTupleSatisfiesVisibility, which should make it a bit faster
(I didn't try any performance tests though). More importantly, we are no
longer violating portable C practices by assuming that small integers are
distinct from all pointer values, and HeapTupleSatisfiesDirty no longer
has a non-reentrant API involving side-effects on a global variable.
There were a couple of places calling HeapTupleSatisfiesXXX routines
directly rather than through the HeapTupleSatisfiesVisibility macro.
Since these places had to be changed anyway, I chose to make them go
through the macro for uniformity.
Along the way I renamed HeapTupleSatisfiesSnapshot to HeapTupleSatisfiesMVCC
to emphasize that it's only used with MVCC-type snapshots. I was sorely
tempted to rename HeapTupleSatisfiesVisibility to HeapTupleSatisfiesSnapshot,
but forebore for the moment to avoid confusion and reduce the likelihood that
this patch breaks some of the pending patches. Might want to reconsider
doing that later.
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
this, add a 16-bit "flags" field to page headers by stealing some bits from
pd_tli. We use one flag bit as a hint to indicate whether there are any
unused line pointers; the remaining 15 are available for future use.
This is a cut-down form of an idea proposed by Hiroki Kataoka in July 2005.
At the time it was rejected because the original patch increased the size of
page headers and it wasn't clear that the benefit outweighed the distributed
cost. The flag-bit approach gets most of the benefit without requiring an
increase in the page header size.
Heikki Linnakangas and Tom Lane
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
I refactored findsplitloc and checksplitloc so that the division of
labor is more clear IMO. I pushed all the space calculation inside the
loop to checksplitloc.
I also fixed the off by 4 in free space calculation caused by
PageGetFreeSpace subtracting sizeof(ItemIdData), even though it was
harmless, because it was distracting and I felt it might come back to
bite us in the future if we change the page layout or alignments.
There's now a new function PageGetExactFreeSpace that doesn't do the
subtraction.
findsplitloc now tries the "just the new item to right page" split as
well. If people don't like the refactoring, I can write a patch to just
add that.
Heikki Linnakangas
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
is deleted. A backend about to unlink a file now sends a "revoke fsync"
request to the bgwriter to make it clean out pending fsync requests. There
is still a race condition where the bgwriter may try to fsync after the unlink
has happened, but we can resolve that by rechecking the fsync request queue
to see if a revoke request arrived meanwhile. This eliminates the former
kluge of "just assuming" that an ENOENT failure is okay, and lets us handle
the fact that on Windows it might be EACCES too without introducing any
questionable assumptions. After an idea of mine improved by Magnus.
The HEAD patch doesn't apply cleanly to 8.2, but I'll see about a back-port
later. In the meantime this could do with some testing on Windows; I've been
able to force it through the code path via ENOENT, but that doesn't prove that
it actually fixes the Windows problem ...
accessing it, like DROP DATABASE. This allows the regression tests to pass
with autovacuum enabled, which open the gates for finally enabling autovacuum
by default.
having md.c return a success/failure boolean to smgr.c, which was just going
to elog anyway, let md.c issue the elog messages itself. This allows better
error reporting, particularly in cases such as "short read" or "short write"
which Peter was complaining of. Also, remove the kluge of allowing mdread()
to return zeroes from a read-beyond-EOF: this is now an error condition
except when InRecovery or zero_damaged_pages = true. (Hash indexes used to
require that behavior, but no more.) Also, enforce that mdwrite() is to be
used for rewriting existing blocks while mdextend() is to be used for
extending the relation EOF. This restriction lets us get rid of the old
ad-hoc defense against creating huge files by an accidental reference to
a bogus block number: we'll only create new segments in mdextend() not
mdwrite() or mdread(). (Again, when InRecovery we allow it anyway, since
we need to allow updates of blocks that were later truncated away.)
Also, clean up the original makeshift patch for bug #2737: move the
responsibility for padding relation segments to full length into md.c.
of increasing size, instead of one at a time. This reduces the memory
management overhead when num_temp_buffers is large: in the previous coding
we would actually waste 50% of the space used for temp buffers, because aset.c
would round the individual requests up to 16K. Problem noted while studying
a performance issue reported by Steven Flatt.
Back-patch as far as 8.1 --- older versions used few enough local buffers
that the issue isn't significant for them.
Windows), arrange for each postmaster child process to be its own process
group leader, and deliver signals SIGINT, SIGTERM, SIGQUIT to the whole
process group not only the direct child process. This provides saner behavior
for archive and recovery scripts; in particular, it's possible to shut down a
warm-standby recovery server using "pg_ctl stop -m immediate", since delivery
of SIGQUIT to the startup subprocess will result in killing the waiting
recovery_command. Also, this makes Query Cancel and statement_timeout apply
to scripts being run from backends via system(). (There is no support in the
core backend for that, but it's widely done using untrusted PLs.) Per gripe
from Stephen Harris and subsequent discussion.
any no-longer-needed segments; just truncate them to zero bytes and leave
the files in place for possible future re-use. This avoids problems when
the segments are re-used due to relation growth shortly after truncation.
Before, the bgwriter, and possibly other backends, could still be holding
open file references to the old segment files, and would write dirty blocks
into those files where they'd disappear from the view of other processes.
Back-patch as far as 8.0. I believe the 7.x branches are not vulnerable,
because they had no bgwriter, and "blind" writes by other backends would
always be done via freshly-opened file references.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
modules; the first try was not usable in EXEC_BACKEND builds (e.g.,
Windows). Instead, just provide some entry points to increase the
allocation requests during postmaster start, and provide a dedicated
LWLock that can be used to synchronize allocation operations performed
by backends. Per discussion with Marc Munro.
to performance. (A wholesale effort to get rid of strncpy should be
undertaken sometime, but not during beta.) This commit also fixes dynahash.c
to correctly truncate overlength string keys for hashtables, so that its
callers don't have to anymore.
wrong answer, as has been seen to occur with a buggy Linux kernel. Not
really our bug, but it's a simple test in a seldom-used control path,
so might as well have a defense.
even when a single relation requires more than max_fsm_pages pages. Also,
make VACUUM emit a warning in this case, since it likely means that VACUUM
FULL or other drastic corrective measure is needed. Per reports from Jeff
Frost and others of unexpected changes in the claimed max_fsm_pages need.
contrib functionality. Along the way, remove the USER_LOCKS configuration
symbol, since it no longer makes any sense to try to compile that out.
No user documentation yet ... mmoncure has promised to write some.
Thanks to Abhijit Menon-Sen for creating a first draft to work from.
after an error during VACUUM. We have a PG_TRY block anyway around the only
call sites, so just reset it in the CATCH clause instead of having
AtEOXact_Buffers blindly do it during xact end. I think the old code was
actively wrong for the case of a failure during ANALYZE inside a
subtransaction --- the flag wouldn't get cleared until main transaction end.
Probably not worth back-patching though.
PGPROC array into snapshots, and use this information to avoid visits
to pg_subtrans in HeapTupleSatisfiesSnapshot. This appears to solve
the pg_subtrans-related context swap storm problem that's been reported
by several people for 8.1. While at it, modify GetSnapshotData to not
take an exclusive lock on ProcArrayLock, as closer analysis shows that
shared lock is always sufficient.
Itagaki Takahiro and Tom Lane
locks that would conflict with a specified lock request, without
actually trying to get that lock. Use this instead of the former ad hoc
method of doing the first wait step in CREATE INDEX CONCURRENTLY.
Fixes problem with undetected deadlock and in many cases will allow the
index creation to proceed sooner than it otherwise could've. Per
discussion with Greg Stark.
that ps_status provides by appending 'waiting' to the PS display. This
completes the project of making it feasible to turn off process title
updates and instead rely on pg_stat_activity. Per my suggestion a few
weeks ago.
the rel, it's easy to get rid of the narrow race-condition window that
used to exist in VACUUM and CLUSTER. Did some minor code-beautification
work in the same area, too.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
vacuums. This allows a OLTP-like system with big tables to continue
regular vacuuming on small-but-frequently-updated tables while the
big tables are being vacuumed.
Original patch from Hannu Krossing, rewritten by Tom Lane and updated
by me.
BufferAlloc tries to insert a new mapping entry before deleting the old one
for a buffer, we have a transient need for more than NBuffers entries ---
one more in 8.1, and as many as NUM_BUFFER_PARTITIONS more in CVS HEAD.
In theory this could lead to an "out of shared memory" failure if shmem
had already been completely claimed by the time the extra entries were
needed.
to the low-order bits of the entry hash value. Also make some incidental
cleanups in the dynahash API, such as not exporting the hash header
structs to the world.
changing semantics too much. statement_timestamp is now set immediately
upon receipt of a client command message, and the various places that used
to do their own gettimeofday() calls to mark command startup are referenced
to that instead. I have also made stats_command_string use that same
value for pg_stat_activity.query_start for both the command itself and
its eventual replacement by <IDLE> or <idle in transaction>. There was
some debate about that, but no argument that seemed convincing enough to
justify an extra gettimeofday() call.
current commands; instead, store current-status information in shared
memory. This substantially reduces the overhead of stats_command_string
and also ensures that pg_stat_activity is fully up to date at all times.
Per my recent proposal.
always has been, because it's not got any .globl declaration! We've
been relying on the solaris_sparc.s code instead. Rip it out.
(Not back-patched, since this is just cosmetic cleanup.)
into a single mostly-physical-order scan of the index. This requires some
ticklish interlocking considerations, but should create no material
performance impact on normal index operations (at least given the
already-committed changes to make scans work a page at a time). VACUUM
itself should get significantly faster in any index that's degenerated to a
very nonlinear page order. Also, we save one pass over the index entirely,
except in the case where there were no deletions to do and so only one pass
happened anyway.
Original patch by Heikki Linnakangas, rework by Tom Lane.
The former approach used ExclusiveLock on pg_database, which being a
cluster-wide lock meant only one of these operations could proceed at
a time; worse, it also blocked all incoming connections in ReverifyMyDatabase.
Now that we have LockSharedObject(), we can use locks of different types
applied to databases considered as objects. This allows much more
flexible management of the interlocking: two CREATE DATABASEs need not
block each other, and need not block connections except to the template
database being used. Similarly DROP DATABASE doesn't block unrelated
operations. The locking used in flatfiles.c is also much narrower in
scope than before. Per recent proposal.
set to the large object context ("fscxt"), as this is inevitably a source of
transaction-duration memory leaks. Not sure why we'd not noticed it before;
maybe people weren't touching a whole lot of LOs in the same transaction
before the 8.1 pg_dump changes. Per report from Wayne Conrad.
Backpatched as far as 8.1, but the problem doubtless goes all the way back.
I'm disinclined to spend the time to try to verify that the older branches
would still work if patched, seeing that this code was significantly modified
for 8.0 and again for 8.1, and that we don't have any trouble reports before
8.1. (Maybe the leaks were smaller before?)
to track the number of LWLock acquisitions and the number of times we
block waiting for an LWLock, on a per-process basis. After having needed
this twice in the past few months, seems like it should go into CVS.
update no-longer-existing pages to fall through as no-ops, but make a note
of each page number referenced by such records. If we don't see a later
XLOG entry dropping the table or truncating away the page, complain at
the end of XLOG replay. Since this fixes the known failure mode for
full_page_writes = off, revert my previous band-aid patch that disabled
that GUC variable.
If a process abandons a wait in LockBufferForCleanup (in practice,
only happens if someone cancels a VACUUM) just before someone else
sends it a signal indicating the buffer is available, it was possible
for the wakeup to remain in the process' semaphore, causing misbehavior
next time the process waited for an lmgr lock. Rather than try to
prevent the race condition directly, it seems best to make the lock
manager robust against leftover wakeups, by having it repeat waiting
on the semaphore if the lock has not actually been granted or denied
yet.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
startup or recovery process. Since such a process isn't a real backend,
pgstat.c gets confused. This accounts for recent reports of strange
"invalid server process ID -1" log messages during crash recovery.
There isn't any point in attempting to make the report, since we'll discard
stats in such scenarios anyhow.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
checkpoint in the bgwriter. This forestalls overflow of the fsync request
queue, which is not fatal but causes considerable performance degradation
when it occurs (because backends then have to do their own fsyncs). Per
patch from Itagaki Takahiro, modified a little bit by me.
files: avoid creating stats hashtable entries for tables that aren't being
touched except by vacuum/analyze, ensure that entries for dropped tables are
removed promptly, and tweak the data layout to avoid storing useless struct
padding. Also improve the performance of pgstat_vacuum_tabstat(), and make
sure that autovacuum invokes it exactly once per autovac cycle rather than
multiple times or not at all. This should cure recent complaints about 8.1
showing much higher stats I/O volume than was seen in 8.0. It'd still be a
good idea to revisit the design with an eye to not re-writing the entire
stats dataset every half second ... but that would be too much to backpatch,
I fear.
transaction as aborted. Since we only call XactLockTableWait on XIDs
that we believe to be currently running, the odds of this code ever
actually firing are minimal. It's certainly unnecessary, since a
transaction that's not either running or committed will be presumed
aborted anyway. What's more, it's not hard to imagine scenarios where
this could result in corrupting pg_clog: for instance, if a bogus XID
somehow got passed to XactLockTableWait. I think the code probably
dates from the ancient era when we didn't have TransactionIdIsInProgress;
back then it may have been necessary, but now I think it's a waste of
cycles and potentially dangerous. Per discussion with Qingqing Zhou
and Karsten Hilbert.
the relation but it finds a pre-existing valid buffer. The buffer does not
correspond to any page known to the kernel, so we *must* do smgrextend to
ensure that the space becomes allocated. The 7.x branches all do this
correctly, but the corner case got lost somewhere during 8.0 bufmgr rewrites.
(My fault no doubt :-( ... I think I assumed that such a buffer must be
not-BM_VALID, which is not so.)
an LWLock instead of a spinlock. This hardly matters on Unix machines
but should improve startup performance on Windows (or any port using
EXEC_BACKEND). Per previous discussion.
in favor of having just one set of macros that don't do HOLD/RESUME_INTERRUPTS
(hence, these correspond to the old SpinLockAcquire_NoHoldoff case).
Given our coding rules for spinlock use, there is no reason to allow
CHECK_FOR_INTERRUPTS to be done while holding a spinlock, and also there
is no situation where ImmediateInterruptOK will be true while holding a
spinlock. Therefore doing HOLD/RESUME_INTERRUPTS while taking/releasing a
spinlock is just a waste of cycles. Qingqing Zhou and Tom Lane.
file. The original code probed the PGPROC array separately for each PID,
which was not good for large numbers of backends: not only is the runtime
O(N^2) but most of it is spent holding ProcArrayLock. Instead, take the
lock just once and copy the active PIDs into an array, then use qsort
and bsearch so that the lookup time is more like O(N log N).
reduce contention for the former single LockMgrLock. Per my recent
proposal. I set it up for 16 partitions, but on a pgbench test this
gives only a marginal further improvement over 4 partitions --- we need
to test more scenarios to choose the number of partitions.
the data defining the semantics of a lock method (ie, conflict resolution
table and ancillary data, which is all constant) and the hash tables
storing the current state. The only thing we give up by this is the
ability to use separate hashtables for different lock methods, but there
is no need for that anyway. Put some extra fields into the LockMethod
definition structs to clean up some other uglinesses, like hard-wired
tests for DEFAULT_LOCKMETHOD and USER_LOCKMETHOD. This commit doesn't
do anything about the performance issues we were discussing, but it clears
away some of the underbrush that's in the way of fixing that.
SLRU area. The number of slots is still a compile-time constant (someday
we might want to change that), but at least it's a different constant for
each SLRU area. Increase number of subtrans buffers to 32 based on
experimentation with a heavily subtrans-bashing test case, and increase
number of multixact member buffers to 16, since it's obviously silly for
it not to be at least twice the number of multixact offset buffers.
if we already have a stronger lock due to the index's table being the
update target table of the query. Same optimization I applied earlier
at the table level. There doesn't seem to be much interest in the more
radical idea of not locking indexes at all, so do what we can ...
Also add a retry for Unixen returning EINTR, which hasn't been reported
as an issue but at least theoretically could be. Patch by Qingqing Zhou,
some minor adjustments by me.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
that was added to localbuf.c in 8.1; therefore, applying it to a temp table
left corrupt lookup state in memory. The only case where this had a
significant chance of causing problems was an ON COMMIT DELETE ROWS temp
table; the other possible paths left bogus state that was unlikely to
be used again. Per report from Csaba Nagy.
to assume that the string pointer passed to set_ps_display is good forever.
There's no need to anyway since ps_status.c itself saves the string, and
we already had an API (get_ps_display) to return it.
I believe this explains Jim Nasby's report of intermittent crashes in
elog.c when %i format code is in use in log_line_prefix.
While at it, repair a previously unnoticed problem: on some platforms such as
Darwin, the string returned by get_ps_display was blank-padded to the maximum
length, meaning that lock.c's attempt to append " waiting" to it never worked.
advance its usage_count. This includes writes of dirty buffers triggered
by bgwriter, checkpoint, or FlushRelationBuffers, as well as various
corner cases that really ought not count as accesses to the page.
Should make for some marginal improvement in the quality of our decisions
about when to recycle buffers. Per suggestion from ITAGAKI Takahiro.
pointers, to ensure that compilers won't rearrange accesses to occur
while we're not holding the buffer header spinlock. It's probably
not necessary to mark volatile in every single place in bufmgr.c,
but better safe than sorry. Per trouble report from Kevin Grittner.
whether we seem to be running in a uniprocessor or multiprocessor.
The adjustment rules could probably still use further tweaking, but
I'm convinced this should be a win overall.
bytes. This shouldn't make any difference on x86 machines, where the size
happened to be 16 bytes anyway, but on 64-bit machines and machines with
slock_t int or wider, it will speed array indexing and hopefully reduce
SMP cache contention effects. Per recent experimentation.
to 'Size' (that is, size_t), and install overflow detection checks in it.
This allows us to remove the former arbitrary restrictions on NBuffers
etc. It won't make any difference in a 32-bit machine, but in a 64-bit
machine you could theoretically have terabytes of shared buffers.
(How efficiently we could manage 'em remains to be seen.) Similarly,
num_temp_buffers, work_mem, and maintenance_work_mem can be set above
2Gb on a 64-bit machine. Original patch from Koichi Suzuki, additional
work by moi.
computation. On modern machines this is as fast if not faster, and we
don't have to clog the CPU's L2 cache with a tens-of-KB pointer array.
If we ever decide to adopt a more dynamic allocation method for shared
buffers, we'll probably have to revert this patch, but in the meantime
we might as well save a few bytes and nanoseconds. Per Qingqing Zhou.
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
exit, instead of trying to take shortcuts. Introduce some additional
shutdown callback routines to eliminate kluges like having ProcKill
be responsible for shutting down the buffer manager. Ensure that the
order of operations during shutdown is predictable and what you would
expect given the module layering.
max_files_per_process. Going further than that is just a waste of
cycles, and it seems that current Cygwin does not cope gracefully
with deliberately running the system out of FDs. Per Andrew Dunstan.
doesn't block the bgwriter from making progress writing out other buffers.
This was a hard problem in the context of the ARC/2Q design, but it's
trivial in the context of clock sweep ... just advance the sweep counter
before we try to write not after.
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
(a/k/a SELECT INTO). Instead, flush and fsync the whole relation before
committing. We do still need the WAL log when PITR is active, however.
Simon Riggs and Tom Lane.
includes error checking and an appropriate ereport(ERROR) message.
This gets rid of rather tedious and error-prone manipulation of errno,
as well as a Windows-specific bug workaround, at more than a dozen
call sites. After an idea in a recent patch by Heikki Linnakangas.
it is sufficient to track whether a backend holds a lock or not, and
store information about transaction vs. session locks only in the
inside-the-backend LocalLockTable. Since there can now be but one
PROCLOCK per lock per backend, LockCountMyLocks() is no longer needed,
thus eliminating some O(N^2) behavior when a backend holds many locks.
Also simplify the LockAcquire/LockRelease API by passing just a
'sessionLock' boolean instead of a transaction ID. The previous API
was designed with the idea that per-transaction lock holding would be
important for subtransactions, but now that we have subtransactions we
know that this is unwanted. While at it, add an 'isTempObject' parameter
to LockAcquire to indicate whether the lock is being taken on a temp
table. This is not used just yet, but will be needed shortly for
two-phase commit.
a descriptor that uses the current transaction snapshot, rather than
SnapshotNow as it did before (and still does if INV_WRITE is set).
This means pg_dump will now dump a consistent snapshot of large object
contents, as it never could do before. Also, add a lo_create() function
that is similar to lo_creat() but allows the desired OID of the large
object to be specified. This will simplify pg_restore considerably
(but I'll fix that in a separate commit).
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
are now reported via elog, eliminating the need to test the result code
at most call sites. Make it possible for the caller to distinguish a
freshly acquired lock from one already held in the current transaction.
Use that capability to avoid redundant AcceptInvalidationMessages() calls
in LockRelation().
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
Also, remove the rather useless return value of LockReleaseAll. Change
response to detection of corruption in the shared lock tables to PANIC,
since that is the only way of cleaning up fully.
Originally an idea of Heikki Linnakangas, variously hacked on by
Alvaro Herrera and Tom Lane.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
memset() or MemSet() to a char *. For one, memset()'s first argument is
a void *, and further void * can be implicitly coerced to/from any other
pointer type.
is contention for a tuple-level lock. This solves the problem of a
would-be exclusive locker being starved out by an indefinite succession
of share-lockers. Per recent discussion with Alvaro.
Essentially, we shoehorn in a lockable-object-type field by taking
a byte away from the lockmethodid, which can surely fit in one byte
instead of two. This allows less artificial definitions of all the
other fields of LOCKTAG; we can get rid of the special pg_xactlock
pseudo-relation, and also support locks on individual tuples and
general database objects (including shared objects). None of those
possibilities are actually exploited just yet, however.
I removed pg_xactlock from pg_class, but did not force initdb for
that change. At this point, relkind 's' (SPECIAL) is unused and
could be removed entirely.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
avoid encroaching on the 'user' range of OIDs by allowing automatic
OID assignment to use values below 16k until we reach normal operation.
initdb not forced since this doesn't make any incompatible change;
however a lot of stuff will have different OIDs after your next initdb.
PageIndexTupleDelete() with a single pass of compactification ---
logic mostly lifted from PageRepairFragmentation. I noticed while
profiling that a VACUUM that's cleaning up a whole lot of deleted
tuples would spend as much as a third of its CPU time in
PageIndexTupleDelete; not too surprising considering the loop method
was roughly O(N^2) in the number of tuples involved.
to write out data that we are about to tell the filesystem to drop.
smgr_internal_unlink already had a DropRelFileNodeBuffers call to
get rid of dead buffers without a write after it's no longer possible
to roll back the deleting transaction. Adding a similar call in
smgrtruncate simplifies callers and makes the overall division of
labor clearer. This patch removes the former behavior that VACUUM
would write all dirty buffers of a relation unconditionally.
the freelist, plus per-buffer spinlocks that protect access to individual
shared buffer headers. This requires abandoning a global freelist (since
the freelist is a global contention point), which shoots down ARC and 2Q
as well as plain LRU management. Adopt a clock sweep algorithm instead.
Preliminary results show substantial improvement in multi-backend situations.
no held locks. This maintains the invariant that proclocks are present
only for procs that are holding or awaiting a lock; when this is not
true, LockRelease will fail. Per report from Stephen Clouse.
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
share lock on a buffer being written out before releasing BufMgrLock in
the BufferAlloc code path; if we do it later we might block on someone
who's re-pinned the buffer. I believe this is only an issue for BufferAlloc
and not the other places that call FlushBuffer. BufferSync must continue
to do it the old way since it may well be trying to write buffers that
other backends have pinned; but it should not be holding any conflicting
locks. FlushRelationBuffers is okay since it's got exclusive lock at the
relation level.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
to shared memory as soon as possible, ie, right after read_backend_variables.
The effective difference from the original code is that this happens
before instead of after read_nondefault_variables(), which loads GUC
information and is apparently capable of expanding the backend's memory
allocation more than you'd think it should. This should fix the
failure-to-attach-to-shared-memory reports we've been seeing on Windows.
Also clean up a few bits of unnecessarily grotty EXEC_BACKEND code.
no need for it to be nearly as big as the global hash table, and since
it's not in shared memory it can grow if it does need to be bigger.
By reducing the size, we speed up hash_seq_search(), which saves a
significant fraction of subtransaction entry/exit overhead.
returning a NULL pointer (some callers remembered to check the return
value, but some did not -- it is safer to just bail out).
Also, cleanup pgstat.c to use elog(ERROR) rather than elog(LOG) followed
by exit().
This does not disable the bgwriter process: it still has to wake up often
enough to collect fsync requests from backends in a timely fashion. But
it responds to the recent gripe about not being able to prevent the disk
from being spun up constantly.
pins at end of transaction, and reduce AtEOXact_Buffers to an Assert
cross-check that this was done correctly. When not USE_ASSERT_CHECKING,
AtEOXact_Buffers is a complete no-op. This gets rid of an O(NBuffers)
bottleneck during transaction commit/abort, which recent testing has shown
becomes significant above a few tens of thousands of shared buffers.
(if any) currently waited for by LockBufferForCleanup(), which is all
that we were using it for anymore. Saves some space and eliminates
proportional-to-NBuffers slowdown in UnlockBuffers().
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
pg_subtrans --- what we need is the oldest xmin of any snapshot in use
in the current top transaction. Introduce a new variable TransactionXmin
to play this role. Fixes intermittent regression failure reported by
Neil Conway.
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
Asserts would lead to a server core dump if an error occurred while
trying to abort a failed subtransaction (thereby leading to re-execution
of whatever parts of AbortSubTransaction had already run). This of course
does not prevent such an error from creating an infinite loop, but at
least we don't make the situation worse. Responds to an open item on
the subtransactions to-do list.
PROCLOCK structs in shared memory now have only a bitmask for held
locks, rather than counts (making them 40 bytes smaller, which is a
good thing). Multiple locks within a transaction are counted in the
local hash table instead, and we have provision for tracking which
ResourceOwner each count belongs to. Solves recently reported problem
with memory leakage within long transactions.
updates are no longer WAL-logged nor even fsync'd; we do not need to,
since after a crash no old pg_subtrans data is needed again. We truncate
pg_subtrans to RecentGlobalXmin at each checkpoint. slru.c's API is
refactored a little bit to separate out the necessary decisions.
RecentXmin (== MyProc->xmin). This ensures that it will be safe to
truncate pg_subtrans at RecentGlobalXmin, which should largely eliminate
any fear of bloat. Along the way, eliminate SubTransXidsHaveCommonAncestor,
which isn't really needed and could not give a trustworthy result anyway
under the lookback restriction.
In an unrelated but nearby change, #ifdef out GetUndoRecPtr, which has
been dead code since 2001 and seems unlikely to ever be resurrected.
of XLogInsert had the same sort of checkpoint interlock problem as
RecordTransactionCommit, and indeed I found some. Btree index build
and ALTER TABLE SET TABLESPACE write data outside the friendly confines
of the buffer manager, and therefore they have to take their own
responsibility for checkpoint interlock. The easiest solution seems to
be to force smgrimmedsync at the end of the index build or table copy,
even when the operation is being WAL-logged. This is sufficient since
the new index or table will be of interest to no one if we don't get
as far as committing the current transaction.
therefore starting with GetCurrentTransactionId is wrong. Fixes
miscomputation of RecentGlobalXmin leading to bizarre behavior
reported by Gavin Sherry.
number of active subtransaction XIDs in each backend's PGPROC entry,
and use this to avoid expensive probes into pg_subtrans during
TransactionIdIsInProgress. Extend EOXactCallback API to allow add-on
modules to get control at subxact start/end. (This is deliberately
not compatible with the former API, since any uses of that API probably
need manual review anyway.) Add basic reference documentation for
SAVEPOINT and related commands. Minor other cleanups to check off some
of the open issues for subtransactions.
Alvaro Herrera and Tom Lane.
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
password/group files. Also allow read-only subtransactions of a read-write
parent, but not vice versa. These are the reasonably noncontroversial
parts of Alvaro's recent mop-up patch, plus further work on large objects
to minimize use of the TopTransactionResourceOwner.
SAVEPOINT/RELEASE/ROLLBACK-TO syntax. (Alvaro)
Cause COMMIT of a failed transaction to report ROLLBACK instead of
COMMIT in its command tag. (Tom)
Fix a few loose ends in the nested-transactions stuff.
recovery more manageable. Also, undo recent change to add FILE_HEADER
and WASTED_SPACE records to XLOG; instead make the XLOG page header
variable-size with extra fields in the first page of an XLOG file.
This should fix the boundary-case bugs observed by Mark Kirkwood.
initdb forced due to change of XLOG representation.
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
probably should have been to begin with; this is to cover cases like
needing to recreate the per-db directory during WAL replay.
Also, fix heap_create to force pg_class.reltablespace to be zero instead
of the database's default tablespace; this makes the world safe for
CREATE DATABASE to handle all tables in the default tablespace alike,
as per previous discussion. And force pg_class.reltablespace to zero
when creating a relation without physical storage (eg, a view); this
avoids possibly having dangling references in this column after a
subsequent DROP TABLESPACE.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
not holding the buffer's cntx_lock or io_in_progress_lock. A recent
report from Litao Wu makes me wonder whether it is ever possible for
us to drop a buffer and forget to release its cntx_lock. The Assert
does not fire in the regression tests, but that proves little ...
place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
locking conflict against concurrent CHECKPOINT that was discussed a few
weeks ago. Also, if not using WAL archiving (which is always true ATM
but won't be if PITR makes it into this release), there's no need to
WAL-log the index build process; it's sufficient to force-fsync the
completed index before commit. This seems to gain about a factor of 2
in my tests, which is consistent with writing half as much data. I did
not try it with WAL on a separate drive though --- probably the gain would
be a lot less in that scenario.
temp tables, and avoid WAL-logging truncations of temp tables. Do issue
fsync on truncated files (not sure this is necessary but it seems like
a good idea).
rather than an error code, and does elog(ERROR) not elog(WARNING)
when it detects a problem. All callers were simply elog(ERROR)'ing on
failure return anyway, and I find it hard to envision a caller that would
not, so we may as well simplify the callers and produce the more useful
error message directly.
explicitly fsync'ing every (non-temp) file we have written since the
last checkpoint. In the vast majority of cases, the burden of the
fsyncs should fall on the bgwriter process not on backends. (To this
end, we assume that an fsync issued by the bgwriter will force out
blocks written to the same file by other processes using other file
descriptors. Anyone have a problem with that?) This makes the world
safe for WIN32, which ain't even got sync(2), and really makes the world
safe for Unixen as well, because sync(2) never had the semantics we need:
it offers no way to wait for the requested I/O to finish.
Along the way, fix a bug I recently introduced in xlog recovery:
file truncation replay failed to clear bufmgr buffers for the dropped
blocks, which could result in 'PANIC: heap_delete_redo: no block'
later on in xlog replay.
Tom Lane
Simon Riggs
Robert Haas
Itagaki Takahiro
Heikki Linnakangas
Bruce Momjian
Peter Eisentraut
Alvaro Herrera
Neil Conway
Magnus Hagander
Tatsuo Ishii
PostgreSQL Daemon