In VACUUM FULL, an interrupt after the initial transaction has been recorded
as committed can cause postmaster to restart with the following error message:
PANIC: cannot abort transaction NNNN, it was already committed
This problem has been reported many times.
In lazy VACUUM, an interrupt after the table has been truncated by
lazy_truncate_heap causes other backends' relcache to still point to the
removed pages; this can cause future INSERT and UPDATE queries to error out
with the following error message:
could not read block XX of relation 1663/NNN/MMMM: read only 0 of 8192 bytes
The window to this race condition is extremely narrow, but it has been seen in
the wild involving a cancelled autovacuum process.
The solution for both problems is to inhibit interrupts in both operations
until after the respective transactions have been committed. It's not a
complete solution, because the transaction could theoretically be aborted by
some other error, but at least fixes the most common causes of both problems.
of different parsers having different YYSTYPE unions that they want to use
with it. I defined a new union core_YYSTYPE that is just the (very short)
list of semantic values returned by the core scanner. I had originally
worried that this would require an extra interface layer, but actually we can
have parser.c's base_yylex (formerly filtered_base_yylex) take care of that at
no extra cost. Names associated with the core scanner are now "core_yy_foo",
with "base_yy_foo" being used in the core Bison parser and the parser.c
interface layer.
This solves the last serious stumbling block to eliminating plpgsql's separate
lexer. One restriction that will still be present is that plpgsql and the
core will have to agree on the token numbers assigned to tokens that can be
returned by the core lexer. Since Bison doesn't seem willing to accept
external assignments of those numbers, we'll have to live with decreeing that
core and plpgsql grammars declare these tokens first and in the same order.
can be the name of a plpgsql cursor variable, which formerly was converted
to $N before the core parser saw it, but that's no longer the case.
Deal with plain name references to plpgsql variables, and add a regression
test case that exposes the failure.
it works just as well to have them be ordinary identifiers, and this gets rid
of a number of ugly special cases. Plus we aren't interfering with non-rule
usage of these names.
catversion bump because the names change internally in stored rules.
that are not handled by find_coercion_pathway, notably composite->RECORD.
Now that 8.4 supports composites as primary keys, it's worth dealing with
this case.
tarballs under 100 characters. This should avoid failures with certain
untarring tools (WinZip and Midnight Commander have been mentioned as
likely suspects). Per my proposal of yesterday.
catversion bumped since the initial contents of pg_proc change.
at the first keyword of the expression, rather than drawing a rather
artificial distinction between the ESCAPE subclause and the rest.
Per gripe from Gokulakannan Somasundaram and subsequent discusssion.
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
that it can scribble on scan->xs_ctup.t_self while following HOT chains,
so we can't rely on that to stay valid between hashgettuple() calls.
Introduce a private variable in HashScanOpaque, instead.
hash indexes keep entries sorted by hash value. First, the original plans for
concurrency assumed that insertions would happen only at the end of a page,
which is no longer true; this could cause scans to transiently fail to find
index entries in the presence of concurrent insertions. We can compensate
by teaching scans to re-find their position after re-acquiring read locks.
Second, neither the bucket split nor the bucket compaction logic had been
fixed to preserve hashvalue ordering, so application of either of those
processes could lead to permanent corruption of an index, in the sense
that searches might fail to find entries that are present.
This patch fixes the split and compaction logic to preserve hashvalue
ordering, but it cannot do anything about pre-existing corruption. We will
need to recommend reindexing all hash indexes in the 8.4.2 release notes.
To buy back the performance loss hereby induced in split and compaction,
fix them to use PageIndexMultiDelete instead of retail PageIndexDelete
operations. We might later want to do something with qsort'ing the
page contents rather than doing a binary search for each insertion,
but that seemed more invasive than I cared to risk in a back-patch.
Per bug #5157 from Jeff Janes and subsequent investigation.
recent proposal. As proof of concept, remove knowledge of Params from the
core parser, arranging for them to be handled entirely by parser hook
functions. It turns out we need an additional hook for that --- I had
forgotten about the code that handles inferring a parameter's type from
context.
This is a preliminary step towards letting plpgsql handle its variables
through parser hooks. Additional work remains to be done to expose the
facility through SPI, but I think this is all the changes needed in the core
parser.
The original coding ensured nbuckets and nbatch didn't exceed INT_MAX,
which while not insane on its own terms did nothing to protect subsequent
code like "palloc(nbatch * sizeof(BufFile *))". Since enormous join size
estimates might well be planner error rather than reality, it seems best
to constrain the initial sizes to be not more than work_mem/sizeof(pointer),
thus ensuring the allocated arrays don't exceed work_mem. We will allow
nbatch to get bigger than that during subsequent ExecHashIncreaseNumBatches
calls, but we should still guard against integer overflow in those palloc
requests. Per bug #5145 from Bernt Marius Johnsen.
Although the given test case only seems to fail back to 8.2, previous
releases have variants of this issue, so patch all supported branches.
adding the ModifyTable node type --- I had been thinking ModifyTable should
replace Append as a special case in push_plan(), but actually both of them
have to be special-cased.
when FOR UPDATE is propagated down into a sub-select expanded from a view.
Similar bug to parser's isLockedRel issue that I fixed yesterday; likewise
seems not quite worth the effort to back-patch.
underneath the Limit node, not atop it. This fixes the old problem that such
a query might unexpectedly return fewer rows than the LIMIT says, due to
LockRows discarding updated rows.
There is a related problem that LockRows might destroy the sort ordering
produced by earlier steps; but fixing that by pushing LockRows below Sort
would create serious performance problems that are unjustified in many
real-world applications, as well as potential deadlock problems from locking
many more rows than expected. Instead, keep the present semantics of applying
FOR UPDATE after ORDER BY within a single query level; but allow the user to
specify the other way by writing FOR UPDATE in a sub-select. To make that
work, track whether FOR UPDATE appeared explicitly in sub-selects or got
pushed down from the parent, and don't flatten a sub-select that contained an
explicit FOR UPDATE.
that it's called within an AfterTriggerBeginQuery/AfterTriggerEndQuery pair.
The RI cascade triggers suppress that overhead on the assumption that they
are always run non-deferred, so it's possible to violate the condition if
someone mistakenly changes pg_trigger to mark such a trigger deferred.
We don't really care about supporting that, but throwing an error instead
of crashing seems desirable. Per report from Marcelo Costa.
for example in
WITH w AS (SELECT * FROM foo) SELECT * FROM w, bar ... FOR UPDATE
the FOR UPDATE will now affect bar but not foo. This is more useful and
consistent than the original 8.4 behavior, which tried to propagate FOR UPDATE
into the WITH query but always failed due to assorted implementation
restrictions. Even though we are in process of removing those restrictions,
it seems correct on philosophical grounds to not let the outer query's
FOR UPDATE affect the WITH query.
In passing, fix isLockedRel which frequently got things wrong in
nested-subquery cases: "FOR UPDATE OF foo" applies to an alias foo in the
current query level, not subqueries. This has been broken for a long time,
but it doesn't seem worth back-patching further than 8.4 because the actual
consequences are minimal. At worst the parser would sometimes get
RowShareLock on a relation when it should be AccessShareLock or vice versa.
That would only make a difference if someone were using ExclusiveLock
concurrently, which no standard operation does, and anyway FOR UPDATE
doesn't result in visible changes so it's not clear that the someone would
notice any problem. Between that and the fact that FOR UPDATE barely works
with subqueries at all in existing releases, I'm not excited about worrying
about it.
those accepted by date_in(). I confused julian day numbers and number of
days since the postgres epoch 2000-01-01 in the original patch.
I just noticed that it's still easy to get such out-of-range values into
the database using to_date or +- operators, but this patch doesn't do
anything about those functions.
Per report from James Pye.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
style by default. Per discussion, there seems to be hardly anything that
really relies on being able to change the regex flavor, so the ability to
select it via embedded options ought to be enough for any stragglers.
Also, if we didn't remove the GUC, we'd really be morally obligated to
mark the regex functions non-immutable, which'd possibly create performance
issues.
Per recent discussion, add_missing_from has been deprecated for long enough to
consider removing, and it's getting in the way of planned parser refactoring.
The system now always behaves as though add_missing_from were OFF.
pam_message array contains exactly one PAM_PROMPT_ECHO_OFF message.
Instead, deal with however many messages there are, and don't throw error
for PAM_ERROR_MSG and PAM_TEXT_INFO messages. This logic is borrowed from
openssh 5.2p1, which hopefully has seen more real-world PAM usage than we
have. Per bug #5121 from Ryan Douglas, which turned out to be caused by
the conv_proc being called with zero messages. Apparently that is normal
behavior given the combination of Linux pam_krb5 with MS Active Directory
as the domain controller.
Patch all the way back, since this code has been essentially untouched
since 7.4. (Surprising we've not heard complaints before.)
are named in the UPDATE's SET list.
Note: the schema of pg_trigger has not actually changed; we've just started
to use a column that was there all along. catversion bumped anyway so that
this commit is included in the history of potentially interesting changes
to system catalog contents.
Itagaki Takahiro
and SSPI athentication methods. While the old 2000 byte limit was more than
enough for Unix Kerberos implementations, tickets issued by Windows Domain
Controllers can be much larger.
Ian Turner
Also insert a couple of Asserts that check for stack overflow.
Bogus coding appears to be new in 8.4 --- older releases had a much
simpler algorithm here. Per bug #5111.
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
* Stop escaping ? and {. As of SQL:2008, SIMILAR TO is defined to have
POSIX-compatible interpretation of ? as well as {m,n} and related constructs,
so we should allow these things through to our regex engine.
* Escape ^ and $. It appears that our regex engine will treat ^^ at the
beginning of the string the same as ^, and similarly for $$ at the end of
the string, which meant that SIMILAR TO was effectively ignoring ^ at the
start of the pattern and $ at the end. Since these are not supposed to be
metacharacters, this is a bug.
The second part of this is arguably a back-patchable bug fix, but I'm
hesitant to do that because it might break applications that are expecting
something like "col SIMILAR TO '^foo$'" to work like a POSIX pattern.
Seems safer to only change it at a major version boundary.
Per discussion of an example from Doug Gorley.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
Add a variant of pg_get_triggerdef with a second argument "pretty" that
causes the output to be formatted in the way pg_dump used to do. Use this
variant in pg_dump with server versions >= 8.5.
This insulates pg_dump from most future trigger feature additions, such as
the upcoming column triggers patch.
Author: Itagaki Takahiro <itagaki.takahiro@oss.ntt.co.jp>
friends). This code has all been ifdef'd out for many years, and doesn't
seem to have any prospect of becoming any more useful in the future.
EXPLAIN ANALYZE is what people use in practice, and I think if we did want
process-wide counters we'd be more likely to put in dtrace events for that
than try to resurrect this code. Get rid of it so as to have one less detail
to worry about while refactoring execMain.c.
Create a new catalog pg_db_role_setting where they are now stored, and better
encapsulate the code that deals with settings into its realm. The old
datconfig and rolconfig columns are removed.
psql has gained a \drds command to display the settings.
Backwards compatibility warning: while the backwards-compatible system views
still have the config columns, they no longer completely represent the
configuration for a user or database.
Catalog version bumped.
Partially revert the previous patch I installed and replace it with a more
general fix: any time a snapshot is pushed as Active, we need to ensure that it
will not be modified in the future. This means that if the same snapshot is
used as CurrentSnapshot, it needs to be copied separately. This affects
serializable transactions only, because CurrentSnapshot has already been copied
by RegisterSnapshot and so PushActiveSnapshot does not think it needs another
copy. However, CommandCounterIncrement would modify CurrentSnapshot, whereas
ActiveSnapshots must not have their command counters incremented.
I say "partially" because the regression test I added for the previous bug
has been kept.
(This restores 8.3 behavior, because before snapmgr.c existed, any snapshot set
as Active was copied.)
Per bug report from Stuart Bishop in
6bc73d4c0910042358k3d1adff3qa36f8df75198ecea@mail.gmail.com
inheritance parent tables are compared using equal(), instead of doing
strcmp() on the nodeToString representation. The old implementation was
always a tad cheesy, and it finally fails completely as of 8.4, now that the
node tree might contain syntax location information. equal() knows it's
supposed to ignore those fields, but strcmp() hardly can. Per recent
report from Scott Ribe.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
large number of SIGHUP cycles, these would have run the postmaster out
of memory. Noted while testing memory-leak scenario in postgresql.conf
configuration-change-printing patch.
settings: avoid calling superuser() in contexts where it's not defined,
don't leak the transient copies of GetConfigOption output, and avoid the
whole exercise in postmaster child processes.
I found that actually no current caller of GetConfigOption has any use for
its internal check of GUC_SUPERUSER_ONLY. But rather than just remove
that entirely, it seemed better to add a parameter indicating whether to
enforce the check.
Per report from Simon and subsequent testing.
tuple size limit. Improve the error message for index-tuple-too-large
so that it includes the actual size, the limit, and the index name.
Sync with the btree occurrences of the same error.
Back-patch to 8.4 because it appears that the out-of-sync problem
is occurring in the field.
Teodor and Tom
in CREATE OR REPLACE FUNCTION. The original code would update pg_shdepend
as if a new function was being created, even if it wasn't, with two bad
consequences: pg_shdepend might record the wrong owner for the function,
and any dependencies for roles mentioned in the function's ACL would be lost.
The fix is very easy: just don't touch pg_shdepend at all when doing a
function replacement.
Also update the CREATE FUNCTION reference page, which never explained
exactly what changes and doesn't change in a function replacement.
In passing, fix the CREATE VIEW reference page similarly; there's no
code bug there, but the docs didn't say what happens.
The old coding was using a regular snapshot, referenced elsewhere, that was
subject to having its command counter updated. Fix by creating a private copy
of the snapshot exclusively for the cursor.
Backpatch to 8.4, which is when the bug was introduced during the snapshot
management rewrite.
The original coding correctly noted that these aren't just redundancies
(they're effectively X IS NOT NULL, assuming = is strict). However, they
got treated that way if X happened to be in a single-member EquivalenceClass
already, which could happen if there was an ORDER BY X clause, for instance.
The simplest and most reliable solution seems to be to not try to process
such clauses through the EquivalenceClass machinery; just throw them back
for traditional processing. The amount of work that'd be needed to be
smarter than that seems out of proportion to the benefit.
Per bug #5084 from Bernt Marius Johnsen, and analysis by Andrew Gierth.
TupleTableSlot nodes. This eliminates the need to count in advance
how many Slots will be needed, which seems more than worth the small
increase in the amount of palloc traffic during executor startup.
The ExecCountSlots infrastructure is now all dead code, but I'll remove it
in a separate commit for clarity.
Per a comment from Robert Haas.
the strings seen during the bootstrap run. There might have been some
actual point to doing that, many years ago, but as far as I can see the only
value now is to conserve a bit of memory. Even if we cared about wasting
a megabyte or so during the initdb run, it'd be far more effective to
arrange to release memory at the end of each BKI command, instead of
intentionally hanging onto strings that might never be used again.
Not maintaining the table probably makes it faster too; but the main point
of this patch is to get rid of a couple hundred lines of unnecessary and
rather crufty code.
relation rowtype OID into the relcache entries it builds. This ensures
that catcache copies of the relation tupdescs will be fully correct.
While the deficiency doesn't seem to have any effect in the current
sources, we have been bitten by not-quite-right catcache tupdescs before,
so it seems like a good idea to maintain the rule that they should be right.
hand-assigned rowtype OIDs, even when they are not "bootstrapped" catalogs
that have handmade type rows in pg_type.h. Give pg_database such an OID.
Restore the availability of C macros for the rowtype OIDs of the bootstrapped
catalogs. (These macros are now in the individual catalogs' .h files,
though, not in pg_type.h.)
This commit doesn't do anything especially useful by itself, but it's
necessary infrastructure for reverting some ill-considered changes in
relcache.c.
possibility of shared-inval messages causing a relcache flush while it tries
to fill in missing data in preloaded relcache entries. There are actually
two distinct failure modes here:
1. The flush could delete the next-to-be-processed cache entry, causing
the subsequent hash_seq_search calls to go off into the weeds. This is
the problem reported by Michael Brown, and I believe it also accounts
for bug #5074. The simplest fix is to restart the hashtable scan after
we've read any new data from the catalogs. It appears that pre-8.4
branches have not suffered from this failure, because by chance there were
no other catalogs sharing the same hash chains with the catalogs that
RelationCacheInitializePhase2 had work to do for. However that's obviously
pretty fragile, and it seems possible that derivative versions with
additional system catalogs might be vulnerable, so I'm back-patching this
part of the fix anyway.
2. The flush could delete the *current* cache entry, in which case the
pointer to the newly-loaded data would end up being stored into an
already-deleted Relation struct. As long as it was still deleted, the only
consequence would be some leaked space in CacheMemoryContext. But it seems
possible that the Relation struct could already have been recycled, in
which case this represents a hard-to-reproduce clobber of cached data
structures, with unforeseeable consequences. The fix here is to pin the
entry while we work on it.
In passing, also change RelationCacheInitializePhase2 to Assert that
formrdesc() set up the relation's cached TupleDesc (rd_att) with the
correct type OID and hasoids values. This is more appropriate than
silently updating the values, because the original tupdesc might already
have been copied into the catcache. However this part of the patch is
not in HEAD because it fails due to some questionable recent changes in
formrdesc :-(. That will be cleaned up in a subsequent patch.
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
This is intentionally similar to the recently revised syntax for EXPLAIN
options, ie, (name value, ...). The old syntax is still supported for
backwards compatibility, but we intend that any options added in future
will be provided only in the new syntax.
Robert Haas, Emmanuel Cecchet
tests into a small common subroutine, and eliminate an unnecessary difference
in the order in which conditions are tested. Per a comment from Robert Haas.
is unique and is not referenced above the join. In this case the inner
side doesn't affect the query result and can be thrown away entirely.
Although perhaps nobody would ever write such a thing by hand, it's
a reasonably common case in machine-generated SQL.
The current implementation only recognizes the case where the inner side
is a simple relation with a unique index matching the query conditions.
This is enough for the use-cases that have been shown so far, but we
might want to try to handle other cases later.
Robert Haas, somewhat rewritten by Tom
In practice these mistakes were always masked when full_page_writes was on,
because XLogInsert would always choose to log the full page, and then
ginRedoInsertListPage wouldn't try to do anything. But with full_page_writes
off a WAL replay failure was certain.
The GIN_INSERT_LISTPAGE record type could probably be eliminated entirely
in favor of using XLOG_HEAP_NEWPAGE, but I refrained from doing that now
since it would have required a significantly more invasive patch.
In passing do a little bit of code cleanup, including making the accounting
for free space on GIN list pages more precise. (This wasn't a bug as the
errors were always in the conservative direction.)
Per report from Simon. Back-patch to 8.4 which contains the identical code.
if salt_len == 0. This seems to be mostly academic, since nearly all calling
code paths guarantee nonempty salt; the only case that doesn't is
PQencryptPassword where the caller could mistakenly pass an empty username.
So, fix it but don't bother backpatching. Per ljb.
of checkpoint. Although the checkpoint has been written to WAL at that point
already, so that all data is safe, and we'll retry removing the WAL segment at
the next checkpoint, if such a failure persists we won't be able to remove any
other old WAL segments either and will eventually run out of disk space. It's
better to treat the failure as non-fatal, and move on to clean any other WAL
segment and continue with any other end-of-checkpoint cleanup.
We don't normally expect any such failures, but on Windows it can happen with
some anti-virus or backup software that lock files without FILE_SHARE_DELETE
flag.
Also, the loop in pgrename() to retry when the file is locked was broken. If a
file is locked on Windows, you get ERROR_SHARE_VIOLATION, not
ERROR_ACCESS_DENIED, at least on modern versions. Fix that, although I left
the check for ERROR_ACCESS_DENIED in there as well (presumably it was correct
in some environment), and added ERROR_LOCK_VIOLATION to be consistent with
similar checks in pgwin32_open(). Reduce the timeout on the loop from 30s to
10s, on the grounds that since it's been broken, we've effectively had a
timeout of 0s and no-one has complained, so a smaller timeout is actually
closer to the old behavior. A longer timeout would mean that if recycling a
WAL file fails because it's locked for some reason, InstallXLogFileSegment()
will hold ControlFileLock for longer, potentially blocking other backends, so
a long timeout isn't totally harmless.
While we're at it, set errno correctly in pgrename().
Backpatch to 8.2, which is the oldest version supported on Windows. The xlog.c
changes would make sense on other platforms and thus on older versions as
well, but since there's no such locking issues on other platforms, it's not
worth it.
an explicit model of rescan costs being different from first-time costs.
The costing of Material nodes in particular now has some visible relationship
to the actual runtime behavior, where before it was essentially fantasy.
This also fixes up a couple of places where different materialized plan types
were treated differently for no very good reason (probably just oversights).
A couple of the regression tests are affected, because the planner now chooses
to put the other relation on the inside of a nestloop-with-materialize.
So far as I can see both changes are sane, and the planner is now more
consistently following the expectation that it should prefer to materialize
the smaller of two relations.
Per a recent discussion with Robert Haas.
If Apple doesn't fix that reasonably soon, we'll have to consider
back-patching a workaround; but for now, just hack it in HEAD so that
we can get buildfarm reports on HEAD from OS X machines.
Per Jan Otto.
In this case we generate two PathKey references to the expression (one for
DISTINCT and one for ORDER BY) and they really need to refer to the same
EquivalenceClass. However get_eclass_for_sort_expr was being overly paranoid
and creating two different EC's. Correct behavior is to use the SortGroupRef
index to decide whether two references to volatile expressions that are
equal() (ie textually equivalent) should be considered the same.
Backpatch to 8.4. Possibly this should be changed in 8.3 as well, but
I'll refrain in the absence of evidence of a visible failure in that branch.
Per bug #5049.
use that value when the backend is new enough to allow it. This responds
to bug report from Keh-Cheng Chu pointing out that although 2 extra digits
should be sufficient to dump and restore float8 exactly, it is possible to
need 3 extra digits for float4 values.
file handle on it, the file goes into "pending deletion" state where it
still shows up in directory listing, but isn't accessible otherwise. That
confuses RemoveOldXLogFiles(), making it think that the file hasn't been
archived yet, while it actually was, and it was deleted along with the .done
file.
Fix that by renaming the file with ".deleted" extension before deleting it.
Also check the return value of rename() and unlink(), so that if the removal
fails for any reason (e.g another process is holding the file locked), we
don't delete the .done file until the WAL file is really gone.
Backpatch to 8.2, which is the oldest version supported on Windows.
Before, PL/Python converted data between SQL and Python by going
through a C string representation. This broke for bytea in two ways:
- On input (function parameters), you would get a Python string that
contains bytea's particular external representation with backslashes
etc., instead of a sequence of bytes, which is what you would expect
in a Python environment. This problem is exacerbated by the new
bytea output format.
- On output (function return value), null bytes in the Python string
would cause truncation before the data gets stored into a bytea
datum.
This is now fixed by converting directly between the PostgreSQL datum
and the Python representation.
The required generalized infrastructure also allows for other
improvements in passing:
- When returning a boolean value, the SQL datum is now true if and
only if Python considers the value that was passed out of the
PL/Python function to be true. Previously, this determination was
left to the boolean data type input function. So, now returning
'foo' results in true, because Python considers it true, rather than
false because PostgreSQL considers it false.
- On input, we can convert the integer and float types directly to
their Python equivalents without having to go through an
intermediate string representation.
original patch by Caleb Welton, with updates by myself
code was already okay with this, but the hack that obtained the output
column types of a recursive union in advance of doing real parse analysis
of the recursive union forgot to handle the case where there was an inner
WITH clause available to the non-recursive term. Best fix seems to be to
refactor so that we don't need the "throwaway" parse analysis step at all.
Instead, teach the transformSetOperationStmt code to set up the CTE's output
column information after it's processed the non-recursive term normally.
Per report from David Fetter.
build actually attempts to advertise itself via Bonjour. Formerly it always
did so, which meant that packagers had to decide for their users whether
this behavior was wanted or not. The default is "off" to be on the safe
side, though this represents a change in the default behavior of a
Bonjour-enabled build. Per discussion.
with the not-so-deprecated DNSServiceRegister. This patch shouldn't change
any user-visible behavior, it just gets rid of a deprecation warning in
--with-bonjour builds. The new code will fail on OS X releases before 10.3,
but it seems unlikely that anyone will want to run Postgres 8.5 on 10.2.
Formerly, these message types would be discarded unless there was already
a stats hash table entry for the target table. However, the intent of
saving hash table space for unused tables was subverted by the fact that
the physical I/O done by the vacuum or analyze would result in an immediately
following tabstat message, which would create the hash table entry anyway.
All that we had left was surprising loss of statistical data, as in a recent
complaint from Jaime Casanova.
It seems unlikely that a real database would have many tables that go totally
untouched over the long haul, so the consensus is that this "optimization"
serves little purpose anyhow. Remove it, and just create the hash table
entry on demand in all cases.
input functions don't accept either. While the backend can handle such
values fine, they can cause trouble in clients and in pg_dump/restore.
This is followup to the original issue on time datatype reported by Andrew
McNamara a while ago. Like that one, none of these seem worth
back-patching.
specify an encoding explicitly, we used to treat it as being in database
encoding when we parsed it, but then perform a UTF-8 -> database encoding
conversion on it, which was completely bogus. It's now consistently treated as
UTF-8.
to unload and re-load the library.
The difficulty with unloading a library is that we haven't defined safe
protocols for doing so. In particular, there's no safe mechanism for
getting out of a "hook" function pointer unless libraries are unloaded
in reverse order of loading. And there's no mechanism at all for undefining
a custom GUC variable, so GUC would be left with a pointer to an old value
that might or might not still be valid, and very possibly wouldn't be in
the same place anymore.
While the unload and reload behavior had some usefulness in easing
development of new loadable libraries, it's of no use whatever to normal
users, so just disabling it isn't giving up that much. Someday we might
care to expend the effort to develop safe unload protocols; but even if
we did, there'd be little certainty that every third-party loadable module
was following them, so some security restrictions would still be needed.
Back-patch to 8.2; before that, LOAD was superuser-only anyway.
Security: unprivileged users could crash backend. CVE not assigned yet
functions.
This extends the previous patch that forbade SETting these variables inside
security-definer functions. RESET is equally a security hole, since it
would allow regaining privileges of the caller; furthermore it can trigger
Assert failures and perhaps other internal errors, since the code is not
expecting these variables to change in such contexts. The previous patch
did not cover this case because assign hooks don't really have enough
information, so move the responsibility for preventing this into guc.c.
Problem discovered by Heikki Linnakangas.
Security: no CVE assigned yet, extends CVE-2007-6600
to occur for division by zero, even though the code is carefully avoiding
that. All available evidence is that the only functions affected are
int24div, int48div, and int28div, so patch just those three functions to
include a "return" after the ereport() call.
Backpatch to 8.4 so that the fix can be tested in production builds.
For older branches our recommendation will continue to be to use -O1
on affected platforms (which are mostly non-mainstream anyway).
that's generated for a whole-row Var referencing the subquery, when the
subquery is in the nullable side of an outer join. The previous coding
instead put PlaceHolderVars around the elements of the RowExpr. The effect
was that when the outer join made the subquery outputs go to null, the
whole-row Var produced ROW(NULL,NULL,...) rather than just NULL. There
are arguments afoot about whether those things ought to be semantically
indistinguishable, but for the moment they are not entirely so, and the
planner needs to take care that its machinations preserve the difference.
Per bug #5025.
Making this feasible required refactoring ResolveNew() to allow more caller
control over what is substituted for a Var. I chose to make ResolveNew()
a wrapper around a new general-purpose function replace_rte_variables().
I also fixed the ancient bogosity that ResolveNew might fail to set
a query's hasSubLinks field after inserting a SubLink in it. Although
all current callers make sure that happens anyway, we've had bugs of that
sort before, and it seemed like a good time to install a proper solution.
Back-patch to 8.4. The problem can be demonstrated clear back to 8.0,
but the fix would be too invasive in earlier branches; not to mention
that people may be depending on the subtly-incorrect behavior. The
8.4 series is new enough that fixing this probably won't cause complaints,
but it might in older branches. Also, 8.4 shows the incorrect behavior
in more cases than older branches do, because it is able to flatten
subqueries in more cases.
own database's datfrozenxid, if the current value is old enough to be
forcing autovacuums or warning messages. This ensures that a bogus
value is replaced as soon as possible. Per a comment from Heikki.
Recent commits have removed the various uses it was supporting. It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.
to fix the problem that SetClientEncoding needs to be done before
InitializeClientEncoding, as reported by Zdenek Kotala. We get at least
the small consolation of being able to remove the bizarre API detail that
had InitPostgres returning whether user is a superuser.
via the "flat files" facility. This requires making it enough like a backend
to be able to run transactions; it's no longer an "auxiliary process" but
more like the autovacuum worker processes. Also, its signal handling has
to be brought into line with backends/workers. In particular, since it
now has to handle procsignal.c processing, the special autovac-launcher-only
signal conditions are moved to SIGUSR2.
Alvaro, with some cleanup from Tom
XID) in checkpoint records. This eliminates the need to recompute the value
from scratch during database startup, which is one of the two remaining
reasons for the flatfile code to exist. It should also simplify life for
hot-standby operation.
To avoid bloating the checkpoint records unreasonably, I switched from
tracking the oldest database by name to tracking it by OID. This turns
out to save cycles in general (everywhere but the warning-generating
paths, which we hardly care about) and also helps us deal with the case
that the oldest database got dropped instead of being vacuumed. The prior
coding might go for a long time without updating the wrap limit in that case,
which is bad because it might result in a lot of useless autovacuum activity.
(That flat file is now completely useless, but removal will come later.)
To do this, postpone client authentication into the startup transaction
that's run by InitPostgres. We still collect the startup packet and do
SSL initialization (if needed) at the same time we did before. The
AuthenticationTimeout is applied separately to startup packet collection
and the actual authentication cycle. (This is a bit annoying, since it
means a couple extra syscalls; but the signal handling requirements inside
and outside a transaction are sufficiently different that it seems best
to treat the timeouts as completely independent.)
A small security disadvantage is that if the given database name is invalid,
this will be reported to the client before any authentication happens.
We could work around that by connecting to database "postgres" instead,
but consensus seems to be that it's not worth introducing such surprising
behavior.
Processing of all command-line switches and GUC options received from the
client is now postponed until after authentication. This means that
PostAuthDelay is much less useful than it used to be --- if you need to
investigate problems during InitPostgres you'll have to set PreAuthDelay
instead. However, allowing an unauthenticated user to set any GUC options
whatever seems a bit too risky, so we'll live with that.
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
PostgresMain switch. In point of fact, FrontendProtocol is already set
in a backend process, since ProcessStartupPacket() is executed inside
the backend --- it hasn't been run by the postmaster for many years.
And if it were, we'd still certainly want FrontendProtocol to be set before
we get as far as PostgresMain, so that startup errors get reported in the
right protocol.
-v might have some future use in standalone backends, so I didn't go so
far as to remove the switch outright.
Also, initialize FrontendProtocol to 0 not PG_PROTOCOL_LATEST. The only
likely result of presetting it like that is to mask failure-to-set-it
mistakes.
so that their elements are always taken as simple expressions over the
query's input columns. It originally seemed like a good idea to make them
act exactly like GROUP BY and ORDER BY, right down to the SQL92-era behavior
of accepting output column names or numbers. However, that was not such a
great idea, for two reasons:
1. It permits circular references, as exhibited in bug #5018: the output
column could be the one containing the window function itself. (We actually
had a regression test case illustrating this, but nobody thought twice about
how confusing that would be.)
2. It doesn't seem like a good idea for, eg, "lead(foo) OVER (ORDER BY foo)"
to potentially use two completely different meanings for "foo".
Accordingly, narrow down the behavior of window clauses to use only the
SQL99-compliant interpretation that the expressions are simple expressions.
In the original coding, setting a single reloption would cause default
values to be used for all the other reloptions. This is a problem
particularly for autovacuum reloptions.
Itagaki Takahiro
script.
To do this, have pg_ctl pass down its parent shell's PID in an environment
variable PG_GRANDPARENT_PID, and teach CreateLockFile() to disregard that PID
as a false match if it finds it in postmaster.pid. This allows us to cope
with one level of postgres-owned shell process even with pg_ctl in the way,
so it's just as safe as starting the postmaster directly. You still have to
be careful about how you write the initscript though.
Adjust the comments in contrib/start-scripts/ to not deprecate use of
pg_ctl. Also, fix the ROTATELOGS option in the OSX script, which was
indulging in exactly the sort of unsafe coding that renders this fix
pointless :-(. A pipe inside the "sudo" will probably result in more
than one postgres-owned process hanging around.
was incorrectly initialized with timeline ID 0. That rendered the WAL page
unrecoverable, making a subsequent archive recovery stop at that point.
ThisTimeLineID needs to be initialized before calling AdvanceXLInsertBuffer().
This fixes bug #5011 reported by James Bardin. Backpatch to 8.4, as the bug
was introduced by the changes to use of bgwriter for writing the
end-of-archive-recovery checkpoint. Patch by Tom Lane.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
Instead of sending stdout/stderr to /dev/null after forking away from the
terminal, send them to postmaster.log within the data directory. Since
this opens the door to indefinite logfile bloat, recommend even more
strongly that log output be redirected when using silent_mode.
Move the postmaster's initial calls of load_hba() and load_ident() down
to after we have started the log collector, if we are going to. This
is so that errors reported by them will appear in the "usual" place.
Reclassify silent_mode as a LOGGING_WHERE, not LOGGING_WHEN, parameter,
since it's got absolutely nothing to do with the latter category.
In passing, fix some obsolete references to -S ... this option hasn't
had that switch letter for a long time.
Back-patch to 8.4, since as of 8.4 load_hba() and load_ident() are more
picky (and thus more likely to fail) than they used to be. This entire
change was driven by a complaint about those errors disappearing into
the bit bucket.
This causes problems when the system load is high, per report from Zdenek
Kotala in <1250860954.1239.114.camel@localhost>; instead of calling kill
directly, have the signal handler set a flag which is checked in ServerLoop.
This way, the handler can return before being called again by a subsequent
signal sent from the autovacuum launcher. Also, increase the sleep in the
launcher in this failure path to 1 second.
Backpatch to 8.3, which is when the signalling between autovacuum
launcher/postmaster was introduced.
Also, add a couple of ReleasePostmasterChildSlot calls in error paths; this
part backpatched to 8.4 which is when the child slot stuff was introduced.
"all tuples visible" flag in heap page headers. The flag update *must*
be applied before calling XLogInsert, but heap_update and the tuple
moving routines in VACUUM FULL were ignoring this rule. A crash and
replay could therefore leave the flag incorrectly set, causing rows
to appear visible in seqscans when they should not be. This might explain
recent reports of data corruption from Jeff Ross and others.
In passing, do a bit of editorialization on comments in visibilitymap.c.
or previously truncated in the current (sub)transaction. This is safe since
if the (sub)transaction later rolls back, we'd just discard the rel's current
physical file anyway. This avoids unreasonable growth in the number of
transient files when a relation is repeatedly truncated. Per a performance
gripe a couple weeks ago from Todd Cook.
values before they get passed to the index access method. This avoids
repeated detoastings that will otherwise ensue as the comparison value
is examined by various index support functions. We have seen a couple of
reports of cases where repeated detoastings result in an order-of-magnitude
slowdown, so it seems worth adding a bit of extra logic to prevent this.
I had previously proposed trying to avoid duplicate detoastings in general,
but this fix takes care of what seems the most important case in practice
with very little effort or risk.
Back-patch to 8.4 so that the PostGIS folk won't have to wait a year to
have this fix in a production release. (The issue exists further back,
of course, but the code's diverged enough to make backpatching further a
higher-risk action. Also it appears that the possible gains may be limited
in prior releases because of different handling of lossy operators.)
about it doesn't simplify the grammar at all, and it does invite confusion
among those who only read the SELECT syntax summary and not the full details.
Per gripe from Jaime Casanova.
physical conversion when there are dropped columns in the same places in
the input and output tupdescs. This avoids possible performance loss from
the recent patch to improve dropped-column handling, in some cases where
the old code would have worked.
truncate_identifier won't do anything if the passed-in strlen is already
less than NAMEDATALEN, which it always would be given the strlcpy usage.
This has been broken since the arrays-of-composite-types code went in.
Arguably truncate_identifier is suffering from excessive optimization
and should always process the string, but for the moment I'll take the
more localized patch.
Per bug #4987.
I mistakenly removed it last month, thinking it was no longer needed ---
but it is still needed for dealing with joininfo lists. Fortunately this
bit of brain fade hadn't made it into any released versions yet.
does match some unique index on the referenced table, but that index is
only deferrably unique. We were doing this nicely for the
default-to-primary-key case, but were being lazy for the other case.
Dean Rasheed
To make this work in the base case, pg_database now has a nailed-in-cache
relation descriptor that is initialized using hardwired knowledge in
relcache.c. This means pg_database is added to the set of relations that
need to have a Schema_pg_xxx macro maintained in pg_attribute.h. When this
path is taken, we'll have to do a seqscan of pg_database to find the row
we need.
In the normal case, we are able to do an indexscan to find the database's row
by name. This is made possible by storing a global relcache init file that
describes only the shared catalogs and their indexes (and therefore is usable
by all backends in any database). A new backend loads this cache file,
finds its database OID after an indexscan on pg_database, and then loads
the local relcache init file for that database.
This change should effectively eliminate number of databases as a factor
in backend startup time, even with large numbers of databases. However,
the real reason for doing it is as a first step towards getting rid of
the flat files altogether. There are still several other sub-projects
to be tackled before that can happen.
to access a Relation entry it had just closed. I happened to be testing with
CLOBBER_CACHE_ALWAYS, which made this a guaranteed core dump (at least on
machines where sprintf %s isn't forgiving of a NULL pointer). It's probably
quite unlikely that it would fail in the field, but a bug is a bug. Fix by
moving the relation_close call down past the logging action.
Test coverage support now covers the entire source tree, including
contrib, instead of just src/backend. In a related but independent
development, the commands make coverage and make coverage-html can be run
in any directory.
This turned out to be much easier than feared. Besides a few ad hoc fixes
to pass the make target down the tree, change all affected makefiles to
list their directories in the SUBDIRS variable, changed from variants like
DIRS and WANTED_DIRS. MSVC build fix was attempted as well.
if a smart shutdown is already in progress. Backpatch to 8.3, this was broken
in the patch that introduced "dead-end backends".
Per report by Itagaki Takahiro, patch by Fujii Masao.
by supporting conversions in places that used to demand exact rowtype match.
Since this issue is certain to come up elsewhere (in fact, already has,
in ExecEvalConvertRowtype), factor out the support code into new core
functions for tuple conversion. I chose to put these in a new source
file since heaptuple.c is already overly long.
Heavily revised version of a patch by Pavel Stehule.
fsync() fails, say "file" rather than "relation" when printing the filename.
This makes messages that display block numbers a bit confusing. For example,
in message 'could not read block 150000 of file "base/1234/5678.1"', 150000
is the block number from the beginning of the relation, ie. segment 0, not
150000th block within that segment. Per discussion, users aren't usually
interested in the exact location within the file, so we can live with that.
To ease constructing error messages, add FilePathName(File) function to
return the pathname of a virtual fd.
Both hex format and the traditional "escape" format are automatically
handled on input. The output format is selected by the new GUC variable
bytea_output.
As committed, bytea_output defaults to HEX, which is an *incompatible
change*. We will keep it this way for awhile for testing purposes, but
should consider whether to switch to the more backwards-compatible
default of ESCAPE before 8.5 is released.
Peter Eisentraut
Add family of functions that did not exist earlier,
mainly due to historical omission. Original patch by
Abhijit Menon-Sen, with review and modifications by
Joe Conway. catversion.h bumped.
values being complained of.
In passing, also remove the arbitrary length limitation in the similar
error detail message for foreign key violations.
Itagaki Takahiro
This patch gets us out from under the Unix limitation of two user-defined
signal types. We already had done something similar for signals directed to
the postmaster process; this adds multiplexing for signals directed to
backends and auxiliary processes (so long as they're connected to shared
memory).
As proof of concept, replace the former usage of SIGUSR1 and SIGUSR2
for backends with use of the multiplexing mechanism. There are still some
hard-wired definitions of SIGUSR1 and SIGUSR2 for other process types,
but getting rid of those doesn't seem interesting at the moment.
Fujii Masao
This was foreseen to be a good idea long ago, but nobody had got round
to doing it. The recent patch for deferred unique constraints made
transformConstraintAttrs() ugly enough that I decided it was time.
This change will also greatly simplify parsing of deferred CHECK constraints,
if anyone ever gets around to implementing that.
While at it, add a location field to Constraint, and use that to provide
an error cursor for some of the constraint-related error messages.
include a fractional part in the output for MILLISECOND and SECOND cases,
rather than truncating the source value. This is what the float-timestamp
code has always done, and it was clearly the code author's intent to do
the same for integer timestamps, but he forgot about integer division in C.
The other datatypes supported by EXTRACT() already do this correctly.
Backpatch to 8.4, so that the default (integer) behavior of that branch will
match the default (float) behavior of older branches. Arguably we should
patch further back, but it's possible that applications are expecting the
broken behavior in older branches. 8.4 is new enough that expectations
shouldn't be too settled.
Per report from Greg Stark.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
we should ignore NULL array entries, not non-NULL ones. This had the
effect of disabling commit_delay, and could have caused a crash in the
rare race condition the patch was intended to fix.
Bug report and diagnosis by Jeff Janes, in bug #4952.
conindid is the index supporting a constraint. We can use this not only for
unique/primary-key constraints, but also foreign-key constraints, which
depend on the unique index that constrains the referenced columns.
tgconstrindid is just copied from the constraint's conindid field, or is
zero for triggers not associated with constraints.
This is mainly intended as infrastructure for upcoming patches, but it has
some virtue in itself, since it exposes a relationship that you formerly
had to grovel in pg_depend to determine. I simplified one information_schema
view accordingly. (There is a pg_dump query that could also use conindid,
but I left it alone because it wasn't clear it'd get any faster.)
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
This is believed to not change the output at all, with one known exception:
"Subquery Scan foo" becomes "Subquery Scan on foo". (We can fix that if
anyone complains, but it would be a wart, because the old code was clearly
inconsistent.) The main intention is to remove duplicate coding and
provide a cleaner base for subsequent EXPLAIN patching.
Robert Haas
that memory allocated by starting third party DLLs doesn't end up
conflicting with it.
Hopefully this solves the long-time issue with "could not reattach
to shared memory" errors on Win32.
Patch from Tsutomu Yamada and me, based on idea from Trevor Talbot.
a physical tuple in do_tup_output(). A virtual tuple is easier to set up
and also easier for most tuple receivers to process. Per my comment on
Robert Haas' recent patch in this code.
of individually pfree'ing pass-by-reference transition values. This should
be at least as fast as the prior coding, and it has the major advantage of
clearing out any working data an aggregate function may have stored in or
underneath the aggcontext. This avoids memory leakage when an aggregate
such as array_agg() is used in GROUP BY mode. Per report from Chris Spotts.
Back-patch to 8.4. In principle the problem could arise in prior versions,
but since they didn't have array_agg the issue seems not critical.
for the case that the semijoin was implemented within either input by
unique-ifying its RHS before we test to see if it appears to match the current
join situation. The previous coding would select semijoin logic in situations
where we'd already unique-ified the RHS and joined it to some unrelated
relation(s), and then came to join it to the semijoin's LHS. That still gave
the right answer as far as the semijoin itself was concerned, but would lead
to incorrectly examining only an arbitrary one of the matchable rows from the
unrelated relation(s). The cause of this thinko was incorrect unification of
the pre-8.4 logic for IN joins and OUTER joins --- the comparable case for
outer joins can be handled after making the match test, but that's because
there is nothing like the unique-ification escape hatch for outer joins.
Per bug #4934 from Benjamin Reed.
so it doesn't go through BuildTupleFromCStrings. This is more or less a
wash for current uses, but will avoid inefficiency for planned changes to
EXPLAIN.
Robert Haas
not forced out-of-line unless that is necessary to make the row fit on a
page. Previously, they were forced out-of-line if needed to get the row
down to the default target size (1/4th page).
Kevin Grittner
It appears that, for no particularly good reason, pg_listener.h deviates from
the usual convention for declaring attribute number constants. Normally, it's
#define Anum_{catalog-name}_{column-name} {attribute-number}
pg_listener.h, however substitutes a different string that is similar, but not
the same as, the column name. This change fixes that.
Author: Robert Haas <robertmhaas@gmail.com>
by using a lookup table instead of a naive shift-and-count loop. Based on
code originally posted by Sean Eron Anderson at
http://graphics.stanford.edu/%7eseander/bithacks.html.
Greg Stark did the research and benchmarking to show that this is what
we should use. Jeremy Kerr first noticed that this is a hotspot that
could be optimized, though we ended up not using his suggestion of
platform-specific bit-searching code.
reorder a semijoin into or out of the righthand side of another semijoin,
but actually it doesn't work to reorder it into or out of the righthand
side of a left or antijoin, either. Per bug #4906 from Mathieu Fenniak.
This was sloppy thinking on my part. This identity does work:
( A left join B on (Pab) ) semijoin C on (Pac)
==
( A semijoin C on (Pac) ) left join B on (Pab)
but I failed to see that that doesn't mean this does:
( A left join B on (Pab) ) semijoin C on (Pbc)
!=
A left join ( B semijoin C on (Pbc) ) on (Pab)
foo <> false, along with its previous duties of simplifying foo = true
and foo = false. (All of these are equivalent to just foo or NOT foo
as the case may be.) It's not clear how often this is really useful;
but it costs almost nothing to do, and it seems some people think we
should be smart about such cases. Per recent bug report.
sequence, even when the input "tour" doesn't lead directly to such a sequence.
The stack logic that was added in 2004 only supported cases where relations
that had to be joined to each other (due to join order restrictions) were
adjacent in the tour. However, relying on a random search to figure that out
is tremendously inefficient in large join problems, and could even fail
completely (leading to "failed to make a valid plan" errors) if
random_init_pool ran out of patience. It seems better to make the
tour-to-plan transformation a little bit fuzzier so that every tour can form
a legal plan, even though this means that apparently different tours will
sometimes yield the same plan.
In the same vein, get rid of the logic that knew that tours (a,b,c,d,...)
are the same as tours (b,a,c,d,...), and therefore insisted the latter
are invalid. The chance of generating two tours that differ only in
this way isn't that high, and throwing out 50% of possible tours to
avoid such duplication seems more likely to waste valuable genetic-
refinement generations than to do anything useful.
This leaves us with no cases in which geqo_eval will deem a tour invalid,
so get rid of assorted kluges that tried to deal with such cases, in
particular the undocumented assumption that DBL_MAX is an impossible
plan cost.
This is all per testing of Robert Haas' lets-remove-the-collapse-limits
patch. That idea has crashed and burned, at least for now, but we still
got something useful out of it.
It's possible we should back-patch this change, since the "failed to make a
valid plan" error can happen in existing releases; but I'd rather not until
it has gotten more testing.
by unique-ifying the RHS and then inner-joining to some other relation,
that is not grounds for violating the RHS of some other outer join.
Noticed while regression-testing new GEQO code, which will blindly follow
any path that join_is_legal says is legal, and then complain later if that
leads to a dead end.
I'm not certain that this can result in any visible failure in 8.4: the
mistake may always be masked by the fact that subsequent attempts to join
the rest of the RHS of the other join will fail. But I'm not certain it
can't, either, and it's definitely not operating as intended. So back-patch.
The added regression test depends on the new no-failures-allowed logic
that I'm about to commit in GEQO, so no point back-patching that.
memory leakage in error recovery. We were calling FreeExprContext, and
therefore invoking ExprContextCallback callbacks, in both normal and error
exits from subtransactions. However this isn't very safe, as shown in
recent trouble report from Frank van Vugt, in which releasing a tupledesc
refcount failed. It's also unnecessary, since the resources that callbacks
might wish to release should be cleaned up by other error recovery mechanisms
(ie the resource owners). We only really want FreeExprContext to release
memory attached to the exprcontext in the error-exit case. So, add a bool
parameter to FreeExprContext to tell it not to call the callbacks.
A more general solution would be to pass the isCommit bool parameter on to
the callbacks, so they could do only safe things during error exit. But
that would make the patch significantly more invasive and possibly break
third-party code that registers ExprContextCallback callbacks. We might want
to do that later in HEAD, but for now I'll just do what seems reasonable to
back-patch.
that the sanity checking I added to create_mergejoin_plan() in 8.3 was a
few bricks shy of a load: the mergeclauses could reference pathkeys in a
noncanonical order such as x,y,x, not only cases like x,x,y which is all
that the code had allowed for. The odd cases only turn up when using
redundant clauses in an outer join condition, which is why no one had
noticed before.
random number seed each time. This is how it used to work years ago, but
we got rid of the seed reset because it was resetting the main random()
sequence and thus having undesirable effects on the rest of the system.
To fix, establish a private random number state for each execution of
geqo(), and initialize the state using the new GUC variable geqo_seed.
People who want to experiment with different random searches can do so
by changing geqo_seed, but you'll always get the same plan for the same
value of geqo_seed (if holding all other planner inputs constant, of course).
The new state is kept in PlannerInfo by adding a "void *" field reserved
for use by join_search hooks. Most of the rather bulky code changes in
this commit are just arranging to pass PlannerInfo around to all the GEQO
functions (many of which formerly didn't receive it).
Andres Freund, with some editorialization by Tom
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
Changes:
Pass in the keyword lookup array instead of having it be hardwired.
(This incidentally allows elimination of some duplicate coding in ecpg.)
Re-order the token declarations in gram.y so that non-keyword tokens have
numbers that won't change when keywords are added or removed.
Add ".." and ":=" to the set of tokens recognized by scan.l. (Since these
combinations are nowhere legal in core SQL, this does not change anything
except the precise wording of the error you get when you write this.)
RevalidateCachedPlan. This is to avoid a "SPI_ERROR_CONNECT" failure when
the planner calls a SPI-using function and we are already inside one.
The alternative fix is to expect callers of RevalidateCachedPlan to do this,
which seems likely to result in additional hard-to-detect bugs of omission.
Per reports from Frank van Vugt and Marek Lewczuk.
Back-patch to 8.3. It's much harder to trigger the bug in 8.3, due to a
smaller set of cases in which plans can be invalidated, but it could happen.
(I think perhaps only a SI reset event could make 8.3 fail here, but that's
certainly within the realm of possibility.)
size_t arguments, the emitted scanner actually prototypes them with
type yy_size_t, which is sometimes not the same thing depending on
flex version and platform. Easiest fix seems to be to use yy_size_t.
Per buildfarm results.
of features added to flex and bison since this code was originally written.
This change doesn't in itself offer any new capability, but it's needed
infrastructure for planned improvements in plpgsql.
Another feature now available in flex is the ability to make it use palloc
instead of malloc, so do that to avoid possible memory leaks. (We should
at some point change the other lexers likewise, but this commit doesn't
touch them.)
distinction between the external API (parser.h) and declarations that only
need to be visible within the raw parser code (gramparse.h, which now is only
included by parser.c, gram.y, scan.l, and keywords.c). This is in preparation
for the upcoming change to a reentrant lexer, which will require referencing
YYSTYPE in the declarations of base_yylex and filtered_base_yylex, hence
gram.h will have to be included by gramparse.h. We don't want any more files
than absolutely necessary to depend on gram.h, so some cleanup is called for.
RelOptInfo targetlist. It used to be that the only possibility other than
a Var was a RowExpr representing a whole-row child Var, but as of 8.4's
expanded ability to flatten appendrel members, we can get arbitrary expressions
in there. Use the expression's type info and get_typavgwidth() to produce
an at-least-marginally-sane result. Note that get_typavgwidth()'s fallback
estimate (32 bytes) is the same as what was here before, so there will be
no behavioral change for RowExprs. Noted while looking at recent gripe
about constant quals pushed down to FunctionScan appendrel members ...
not only were we failing to recognize the constant qual, we were getting
the width estimate wrong :-(
LC_CTYPE settings to children via BackendParameters. Per discussion,
the postmaster is now just using system defaults anyway, so we might as
well save a few cycles during backend startup.
Otherwise, the LC_CTYPE/COLLATE setting gets reverted when using plperl, which
leads to incorrect query results and index corruption.
This was accidentally broken in the per-database locale patch in 8.4. Pointed
out by Andrew Gierth.
For character types with typmod, character_octet_length columns in the
information schema now show the maximum character length times the
maximum length of a character in the server encoding, instead of some
huge value as before.
timestamp_trunc, timestamptz_trunc, and interval_trunc(). This change
only affects the float-datetime case; the integer-datetime case already
behaved like truncation instead of rounding. Per gripe from Mario Splivalo.
This is a pre-existing issue but I'm choosing not to backpatch, because
it's such a corner case and there have not been prior complaints. The
issue is largely moot anyway given the trend towards integer datetimes.
substituting a child rel's output expressions into the appendrel's restriction
clauses yields a pseudoconstant restriction. We might be able to skip scanning
that child rel entirely (if we get constant FALSE), or generate a one-time
filter. 8.3 more or less accidentally generated plans that weren't completely
stupid in these cases, but that was only because an extra recursive level of
subquery_planner() always occurred and allowed const-simplification to happen.
8.4's ability to pull up appendrel members with non-Var outputs exposes the
fact that we need to work harder here. Per gripe from Sergey Burladyan.
parentheses around the <query expression body> that follows a WITH clause, eg
with cte(foo) as ( values(0) ) ((select foo from cte));
This seems to be just an oversight/thinko in gram.y. Noted while
experimenting with bug #4902.
Alvaro Herrera
Tom Lane
Andrew Dunstan
Peter Eisentraut
Heikki Linnakangas
Magnus Hagander
Teodor Sigaev
Joe Conway