When autovacuum is nominally off, we will still launch autovac workers
to vacuum tables that are at risk of XID wraparound. But after we'd done
that, an autovac worker would proceed to autovacuum every table in the
targeted database, if they meet the usual thresholds for autovacuuming.
This is at best pretty unexpected; at worst it delays response to the
wraparound threat. Fix it so that if autovacuum is nominally off, we
*only* do forced vacuums and not any other work.
Per gripe from Andrey Zhidenkov. This has been like this all along,
so back-patch to all supported branches.
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
Prevent handle_sig_alarm from losing control partway through due to a query
cancel (either an asynchronous SIGINT, or a cancel triggered by one of the
timeout handler functions). That would at least result in failure to
schedule any required future interrupt, and might result in actual
corruption of timeout.c's data structures, if the interrupt happened while
we were updating those.
We could still lose control if an asynchronous SIGINT arrives just as the
function is entered. This wouldn't break any data structures, but it would
have the same effect as if the SIGALRM interrupt had been silently lost:
we'd not fire any currently-due handlers, nor schedule any new interrupt.
To forestall that scenario, forcibly reschedule any pending timer interrupt
during AbortTransaction and AbortSubTransaction. We can avoid any extra
kernel call in most cases by not doing that until we've allowed
LockErrorCleanup to kill the DEADLOCK_TIMEOUT and LOCK_TIMEOUT events.
Another hazard is that some platforms (at least Linux and *BSD) block a
signal before calling its handler and then unblock it on return. When we
longjmp out of the handler, the unblock doesn't happen, and the signal is
left blocked indefinitely. Again, we can fix that by forcibly unblocking
signals during AbortTransaction and AbortSubTransaction.
These latter two problems do not manifest when the longjmp reaches
postgres.c, because the error recovery code there kills all pending timeout
events anyway, and it uses sigsetjmp(..., 1) so that the appropriate signal
mask is restored. So errors thrown outside any transaction should be OK
already, and cleaning up in AbortTransaction and AbortSubTransaction should
be enough to fix these issues. (We're assuming that any code that catches
a query cancel error and doesn't re-throw it will do at least a
subtransaction abort to clean up; but that was pretty much required already
by other subsystems.)
Lastly, ProcSleep should not clear the LOCK_TIMEOUT indicator flag when
disabling that event: if a lock timeout interrupt happened after the lock
was granted, the ensuing query cancel is still going to happen at the next
CHECK_FOR_INTERRUPTS, and we want to report it as a lock timeout not a user
cancel.
Per reports from Dan Wood.
Back-patch to 9.3 where the new timeout handling infrastructure was
introduced. We may at some point decide to back-patch the signal
unblocking changes further, but I'll desist from that until we hear
actual field complaints about it.
It seems to make more sense to use "cutoff multixact" terminology
throughout the backend code; "freeze" is associated with replacing of an
Xid with FrozenTransactionId, which is not what we do for MultiXactIds.
Andres Freund
Some adjustments by Álvaro Herrera
SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
dlist_delete, dlist_insert_after, dlist_insert_before, slist_insert_after
do not need access to the list header, and indeed insisting on that negates
one of the main advantages of a doubly-linked list.
In consequence, revert addition of "cache_bucket" field to CatCTup.
Provide a common implementation of embedded singly-linked and
doubly-linked lists. "Embedded" in the sense that the nodes'
next/previous pointers exist within some larger struct; this design
choice reduces memory allocation overhead.
Most of the implementation uses inlineable functions (where supported),
for performance.
Some existing uses of both types of lists have been converted to the new
code, for demonstration purposes. Other uses can (and probably will) be
converted in the future. Since dllist.c is unused after this conversion,
it has been removed.
Author: Andres Freund
Some tweaks by me
Reviewed by Tom Lane, Peter Geoghegan
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
Management of timeouts was getting a little cumbersome; what we
originally had was more than enough back when we were only concerned
about deadlocks and query cancel; however, when we added timeouts for
standby processes, the code got considerably messier. Since there are
plans to add more complex timeouts, this seems a good time to introduce
a central timeout handling module.
External modules register their timeout handlers during process
initialization, and later enable and disable them as they see fit using
a simple API; timeout.c is in charge of keeping track of which timeouts
are in effect at any time, installing a common SIGALRM signal handler,
and calling setitimer() as appropriate to ensure timely firing of
external handlers.
timeout.c additionally supports pluggable modules to add their own
timeouts, though this capability isn't exercised anywhere yet.
Additionally, as of this commit, walsender processes are aware of
timeouts; we had a preexisting bug there that made those ignore SIGALRM,
thus being subject to unhandled deadlocks, particularly during the
authentication phase. This has already been fixed in back branches in
commit 0bf8eb2a, which see for more details.
Main author: Zoltán Böszörményi
Some review and cleanup by Álvaro Herrera
Extensive reworking by Tom Lane
There was a wild mix of calling conventions: Some were declared to
return void and didn't return, some returned an int exit code, some
claimed to return an exit code, which the callers checked, but
actually never returned, and so on.
Now all of these functions are declared to return void and decorated
with attribute noreturn and don't return. That's easiest, and most
code already worked that way.
When the "hot" members of PGPROC were split off to separate PGXACT structs,
many PGPROC fields referred to in comments were moved to PGXACT, but the
comments were neglected in the commit. Mostly this is just a search/replace
of PGPROC with PGXACT, but the way the dummy PGPROC entries are created for
prepared transactions changed more, making some of the comments totally
bogus.
Noah Misch
Per a suggestion from Peter Geoghegan, make WaitLatch responsible for
verifying that the WL_POSTMASTER_DEATH bit it returns is truthful (by
testing PostmasterIsAlive). Then simplify its callers, who no longer
need to do that for themselves. Remove weasel wording about falsely-set
result bits from WaitLatch's API contract.
This doesn't do anything useful just yet, but is intended as supporting
infrastructure for allowing sepgsql to sensibly check DROP permissions.
KaiGai Kohei and Robert Haas
This separates the state (running/idle/idleintransaction etc) into
it's own field ("state"), and leaves the query field containing just
query text.
The query text will now mean "current query" when a query is running
and "last query" in other states. Accordingly,the field has been
renamed from current_query to query.
Since backwards compatibility was broken anyway to make that, the procpid
field has also been renamed to pid - along with the same field in
pg_stat_replication for consistency.
Scott Mead and Magnus Hagander, review work from Greg Smith
Force the transaction isolation level to READ COMMITTED in autovacuum
worker and launcher processes. There is no benefit to using a higher
isolation level, and doing so could result in delaying foreground
transactions (or maybe even causing unnecessary serialization failures?).
Noted by Dan Ports.
Also, make sure we disable zero_damaged_pages and statement_timeout in
the autovac launcher, not only workers. Now that the launcher can run
transactions, these settings could affect its behavior, and it seems
like the same arguments apply to the launcher as the workers.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
In pursuit of this (and with the expectation that WaitLatch will be needed
in more places), convert the latch field that was already added to PGPROC
for sync rep into a generic latch that is activated for all PGPROC-owning
processes, and change many of the standard backend signal handlers to set
that latch when a signal happens. This will allow WaitLatch callers to be
wakened properly by these signals.
In passing, fix a whole bunch of signal handlers that had been hacked to do
things that might change errno, without adding the necessary save/restore
logic for errno. Also make some minor fixes in unix_latch.c, and clean
up bizarre and unsafe scheme for disowning the process's latch. Much of
this has to be back-patched into 9.1.
Peter Geoghegan, with additional work by Tom
Instead of entering them on transaction startup, we materialize them
only when someone wants to wait, which will occur only during CREATE
INDEX CONCURRENTLY. In Hot Standby mode, the startup process must also
be able to probe for conflicting VXID locks, but the lock need never be
fully materialized, because the startup process does not use the normal
lock wait mechanism. Since most VXID locks never need to touch the
lock manager partition locks, this can significantly reduce blocking
contention on read-heavy workloads.
Patch by me. Review by Jeff Davis.
detect postmaster death. Postmaster keeps the write-end of the pipe open,
so when it dies, children get EOF in the read-end. That can conveniently
be waited for in select(), which allows eliminating some of the polling
loops that check for postmaster death. This patch doesn't yet change all
the loops to use the new mechanism, expect a follow-on patch to do that.
This changes the interface to WaitLatch, so that it takes as argument a
bitmask of events that it waits for. Possible events are latch set, timeout,
postmaster death, and socket becoming readable or writeable.
The pipe method behaves slightly differently from the kill() method
previously used in PostmasterIsAlive() in the case that postmaster has died,
but its parent has not yet read its exit code with waitpid(). The pipe
returns EOF as soon as the process dies, but kill() continues to return
true until waitpid() has been called (IOW while the process is a zombie).
Because of that, change PostmasterIsAlive() to use the pipe too, otherwise
WaitLatch() would return immediately with WL_POSTMASTER_DEATH, while
PostmasterIsAlive() would claim it's still alive. That could easily lead to
busy-waiting while postmaster is in zombie state.
Peter Geoghegan with further changes by me, reviewed by Fujii Masao and
Florian Pflug.
Also avoid hardcoding the current default state by giving it the name
"on" and replace with a meaningful name that reflects its behaviour.
Coding only, no change in behaviour.
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
Waiting for relation locks can lead to starvation - it pins down an
autovacuum worker for as long as the lock is held. But if we're doing
an anti-wraparound vacuum, then we still wait; maintenance can no longer
be put off.
To assist with troubleshooting, if log_autovacuum_min_duration >= 0,
we log whenever an autovacuum or autoanalyze is skipped for this reason.
Per a gripe by Josh Berkus, and ensuing discussion.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
When using default autovacuum_vac_cost_limit, autovac_balance_cost relied
on VacuumCostLimit to contain the correct global value ... but after the
first time through in a particular worker process, it didn't, because we'd
trashed it in previous iterations. Depending on the state of other autovac
workers, this could result in a steady reduction of the effective
cost_limit setting as a particular worker processed more and more tables,
causing it to go slower and slower. Spotted by Simon Poole (bug #5759).
Fix by saving and restoring the GUC variables in the loop in do_autovacuum.
In passing, improve a few comments.
Back-patch to 8.3 ... the cost rebalancing code has been buggy since it was
put in.
get_database_list was uselessly allocating its output data, along some
created along the way, in a permanent memory context. This didn't
matter when autovacuum was a single, short-lived process, but now that
the launcher is permanent, it shows up as a permanent leak.
To fix, make get_database list allocate its output data in the caller's
context, which is in charge of freeing it when appropriate; and the
memory leaked by heap_beginscan et al is allocated in a throwaway
transaction context.
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
decisions about when to auto-analyze.
The previous code depended on n_live_tuples + n_dead_tuples - last_anl_tuples,
where all three of these numbers could be bad estimates from ANALYZE itself.
Even worse, in the presence of a steady flow of HOT updates and matching
HOT-tuple reclamations, auto-analyze might never trigger at all, even if all
three numbers are exactly right, because n_dead_tuples could hold steady.
To fix, replace last_anl_tuples with an accurately tracked count of the total
number of committed tuple inserts + updates + deletes since the last ANALYZE
on the table. This can still be compared to the same threshold as before, but
it's much more trustworthy than the old computation. Tracking this requires
one more intra-transaction counter per modified table within backends, but no
additional memory space in the stats collector. There probably isn't any
measurable speed difference; if anything it might be a bit faster than before,
since I was able to eliminate some per-tuple arithmetic operations in favor of
adding sums once per (sub)transaction.
Also, simplify the logic around pgstat vacuum and analyze reporting messages
by not trying to fold VACUUM ANALYZE into a single pgstat message.
The original thought behind this patch was to allow scheduling of analyzes
on parent tables by artificially inflating their changes_since_analyze count.
I've left that for a separate patch since this change seems to stand on its
own merit.
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
Tom Lane
Bruce Momjian
Alvaro Herrera
Simon Riggs
Robert Haas
Kevin Grittner
Peter Eisentraut
Heikki Linnakangas
Magnus Hagander