This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
This reworks the reloption parsing and build of a couple of index AMs by
creating new structures for each index AM's options. This split was
already done for BRIN, GIN and GiST (which actually has a fillfactor
parameter), but not for hash, B-tree and SPGiST which relied on
StdRdOptions due to an overlap with the default option set.
This saves a couple of bytes for rd_options in each relcache entry with
indexes making use of relation options, and brings more consistency
between all index AMs. While on it, add a couple of AssertMacro() calls
to make sure that utility macros to grab values of reloptions are used
with the expected index AM.
Author: Nikolay Shaplov
Reviewed-by: Amit Langote, Michael Paquier, Álvaro Herrera, Dent John
Discussion: https://postgr.es/m/4127670.gFlpRb6XCm@x200m
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
This uses the progress reporting infrastructure added by c16dc1aca5,
adding support for CREATE INDEX and CREATE INDEX CONCURRENTLY.
There are two pieces to this: one is index-AM-agnostic, and the other is
AM-specific. The latter is fairly elaborate for btrees, including
reportage for parallel index builds and the separate phases that btree
index creation uses; other index AMs, which are much simpler in their
building procedures, have simplistic reporting only, but that seems
sufficient, at least for non-concurrent builds.
The index-AM-agnostic part is fairly complete, providing insight into
the CONCURRENTLY wait phases as well as block-based progress during the
index validation table scan. (The index validation index scan requires
patching each AM, which has not been included here.)
Reviewers: Rahila Syed, Pavan Deolasee, Tatsuro Yamada
Discussion: https://postgr.es/m/20181220220022.mg63bhk26zdpvmcj@alvherre.pgsql
To support building indexes over tables of different AMs, the scans to
do so need to be routed through the table AM. While moving a fair
amount of code, nearly all the changes are just moving code to below a
callback.
Currently the range based interface wouldn't make much sense for non
block based table AMs. But that seems aceptable for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Previously the xid horizon was only computed during WAL replay. That
had two major problems:
1) It relied on knowing what the table pointed to looks like. That was
easy enough before the introducing of tableam (we knew it had to be
heap, although some trickery around logging the heap relfilenodes
was required). But to properly handle table AMs we need
per-database catalog access to look up the AM handler, which
recovery doesn't allow.
2) Not knowing the xid horizon also makes it hard to support logical
decoding on standbys. When on a catalog table, we need to be able
to conflict with slots that have an xid horizon that's too old. But
computing the horizon by visiting the heap only works once
consistency is reached, but we always need to be able to detect
conflicts.
There's also a secondary problem, in that the current method performs
redundant work on every standby. But that's counterbalanced by
potentially computing the value when not necessary (either because
there's no standby, or because there's no connected backends).
Solve 1) and 2) by moving computation of the xid horizon to the
primary and by involving tableam in the computation of the horizon.
To address the potentially increased overhead, increase the efficiency
of the xid horizon computation for heap by sorting the tids, and
eliminating redundant buffer accesses. When prefetching is available,
additionally perform prefetching of buffers. As this is more of a
maintenance task, rather than something routinely done in every read
only query, we add an arbitrary 10 to the effective concurrency -
thereby using IO concurrency, when not globally enabled. That's
possibly not the perfect formula, but seems good enough for now.
Bumps WAL format, as latestRemovedXid is now part of the records, and
the heap's relfilenode isn't anymore.
Author: Andres Freund, Amit Khandekar, Robert Haas
Reviewed-By: Robert Haas
Discussion:
https://postgr.es/m/20181212204154.nsxf3gzqv3gesl32@alap3.anarazel.dehttps://postgr.es/m/20181214014235.dal5ogljs3bmlq44@alap3.anarazel.dehttps://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This adds a flag "deterministic" to collations. If that is false,
such a collation disables various optimizations that assume that
strings are equal only if they are byte-wise equal. That then allows
use cases such as case-insensitive or accent-insensitive comparisons
or handling of strings with different Unicode normal forms.
This functionality is only supported with the ICU provider. At least
glibc doesn't appear to have any locales that work in a
nondeterministic way, so it's not worth supporting this for the libc
provider.
The term "deterministic comparison" in this context is from Unicode
Technical Standard #10
(https://unicode.org/reports/tr10/#Deterministic_Comparison).
This patch makes changes in three areas:
- CREATE COLLATION DDL changes and system catalog changes to support
this new flag.
- Many executor nodes and auxiliary code are extended to track
collations. Previously, this code would just throw away collation
information, because the eventually-called user-defined functions
didn't use it since they only cared about equality, which didn't
need collation information.
- String data type functions that do equality comparisons and hashing
are changed to take the (non-)deterministic flag into account. For
comparison, this just means skipping various shortcuts and tie
breakers that use byte-wise comparison. For hashing, we first need
to convert the input string to a canonical "sort key" using the ICU
analogue of strxfrm().
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/flat/1ccc668f-4cbc-0bef-af67-450b47cdfee7@2ndquadrant.com
Too allow table accesses to be not directly dependent on heap, several
new abstractions are needed. Specifically:
1) Heap scans need to be generalized into table scans. Do this by
introducing TableScanDesc, which will be the "base class" for
individual AMs. This contains the AM independent fields from
HeapScanDesc.
The previous heap_{beginscan,rescan,endscan} et al. have been
replaced with a table_ version.
There's no direct replacement for heap_getnext(), as that returned
a HeapTuple, which is undesirable for a other AMs. Instead there's
table_scan_getnextslot(). But note that heap_getnext() lives on,
it's still used widely to access catalog tables.
This is achieved by new scan_begin, scan_end, scan_rescan,
scan_getnextslot callbacks.
2) The portion of parallel scans that's shared between backends need
to be able to do so without the user doing per-AM work. To achieve
that new parallelscan_{estimate, initialize, reinitialize}
callbacks are introduced, which operate on a new
ParallelTableScanDesc, which again can be subclassed by AMs.
As it is likely that several AMs are going to be block oriented,
block oriented callbacks that can be shared between such AMs are
provided and used by heap. table_block_parallelscan_{estimate,
intiialize, reinitialize} as callbacks, and
table_block_parallelscan_{nextpage, init} for use in AMs. These
operate on a ParallelBlockTableScanDesc.
3) Index scans need to be able to access tables to return a tuple, and
there needs to be state across individual accesses to the heap to
store state like buffers. That's now handled by introducing a
sort-of-scan IndexFetchTable, which again is intended to be
subclassed by individual AMs (for heap IndexFetchHeap).
The relevant callbacks for an AM are index_fetch_{end, begin,
reset} to create the necessary state, and index_fetch_tuple to
retrieve an indexed tuple. Note that index_fetch_tuple
implementations need to be smarter than just blindly fetching the
tuples for AMs that have optimizations similar to heap's HOT - the
currently alive tuple in the update chain needs to be fetched if
appropriate.
Similar to table_scan_getnextslot(), it's undesirable to continue
to return HeapTuples. Thus index_fetch_heap (might want to rename
that later) now accepts a slot as an argument. Core code doesn't
have a lot of call sites performing index scans without going
through the systable_* API (in contrast to loads of heap_getnext
calls and working directly with HeapTuples).
Index scans now store the result of a search in
IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the
target is not generally a HeapTuple anymore that seems cleaner.
To be able to sensible adapt code to use the above, two further
callbacks have been introduced:
a) slot_callbacks returns a TupleTableSlotOps* suitable for creating
slots capable of holding a tuple of the AMs
type. table_slot_callbacks() and table_slot_create() are based
upon that, but have additional logic to deal with views, foreign
tables, etc.
While this change could have been done separately, nearly all the
call sites that needed to be adapted for the rest of this commit
also would have been needed to be adapted for
table_slot_callbacks(), making separation not worthwhile.
b) tuple_satisfies_snapshot checks whether the tuple in a slot is
currently visible according to a snapshot. That's required as a few
places now don't have a buffer + HeapTuple around, but a
slot (which in heap's case internally has that information).
Additionally a few infrastructure changes were needed:
I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now
internally uses a slot to keep track of tuples. While
systable_getnext() still returns HeapTuples, and will so for the
foreseeable future, the index API (see 1) above) now only deals with
slots.
The remainder, and largest part, of this commit is then adjusting all
scans in postgres to use the new APIs.
Author: Andres Freund, Haribabu Kommi, Alvaro Herrera
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
... as well as its implementation from backend/access/hash/hashfunc.c to
backend/utils/hash/hashfn.c.
access/hash is the place for the hash index AM, not really appropriate
for generic facilities, which is what hash_any is; having things the old
way meant that anything using hash_any had to include the AM's include
file, pointlessly polluting its namespace with unrelated, unnecessary
cruft.
Also move the HTEqual strategy number to access/stratnum.h from
access/hash.h.
To avoid breaking third-party extension code, add an #include
"utils/hashutils.h" to access/hash.h. (An easily removed line by
committers who enjoy their asbestos suits to protect them from angry
extension authors.)
Discussion: https://postgr.es/m/201901251935.ser5e4h6djt2@alvherre.pgsql
On a split, we allocate a new splitpoint's worth of bucket pages wherein
we initialize the last page with zeros which is fine, but we forgot to set
the checksum for that last page.
We decided to back-patch this fix till 10 because we don't have an easy
way to test it in prior versions. Another reason is that the hash-index
code is changed heavily in 10, so it is not advisable to push the fix
without testing it in prior versions.
Author: Amit Kapila
Reviewed-by: Yugo Nagata
Backpatch-through: 10
Discussion: https://postgr.es/m/5d03686d-727c-dbf8-0064-bf8b97ffe850@2ndquadrant.com
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
Historically, the term procedure was used as a synonym for function in
Postgres/PostgreSQL. Now we have procedures as separate objects from
functions, so we need to clean up the documentation to not mix those
terms.
In particular, mentions of "trigger procedures" are changed to "trigger
functions", and access method "support procedures" are changed to
"support functions". (The latter already used FUNCTION in the SQL
syntax anyway.) Also, the terminology in the SPI chapter has been
cleaned up.
A few tests, examples, and code comments are also adjusted to be
consistent with documentation changes, but not everything.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Hash index searches acquire predicate locks on the primary
page of a bucket. It acquires a lock on both the old and new buckets
for scans that happen concurrently with page splits. During a bucket
split, a predicate lock is copied from the primary page of an old
bucket to the primary page of a new bucket.
Author: Shubham Barai, Amit Kapila
Reviewed by: Amit Kapila, Alexander Korotkov, Thomas Munro
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPvNsM2GTiXdRgaaZ1Pjd1bs+sxfFsf7Ytr+iq+5JJoYXA@mail.gmail.com
Use IndexTupleSize everywhere, instead. Also, remove IndexTupleSize's
internal typecast, as that's not really needed and might mask coding
errors. Change some pointer variable datatypes in the call sites
to compensate for that and make it clearer what we're assuming.
Ildar Musin, Robert Haas, Stephen Frost
Discussion: https://postgr.es/m/0274288e-9e88-13b6-c61c-7b36928bf221@postgrespro.ru
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
btree, hash, and bloom indexes all set up their metapages in standard
format (that is, with pd_lower and pd_upper correctly delimiting the
unused area); but they mostly didn't inform the xlog routines of this.
When calling log_newpage[_buffer], this is bad because it loses the
opportunity to compress unused data out of the WAL record. When
calling XLogRegisterBuffer, it's not such a performance problem because
all of these call sites also use REGBUF_WILL_INIT, preventing an FPI
image from being written. But it's still a good idea to provide the
flag when relevant, because that aids WAL consistency checking.
This completes the project of getting all the in-core index AMs to
handle their metapage WAL operations similarly.
Amit Kapila, reviewed by Michael Paquier
Discussion: https://postgr.es/m/0d273805-0e9e-ec1a-cb84-d4da400b8f85@lab.ntt.co.jp
This was intended as infrastructure for weakening VACUUM's locking
requirements, similar to what was done for btree indexes in commit
2ed5b87f96. However, for hash indexes,
it seems that the improvements which are possible are actually
extremely marginal. Furthermore, performing the LSN cross-check will
end up skipping cleanup far more often than is necessary; we only care
about page modifications due to a VACUUM, but the LSN check will fail
if ANY modification has occurred. So, rather than pressing forward
with that "optimization", just rip the LSN field out.
Patch by me, reviewed by Ashutosh Sharma and Amit Kapila
Discussion: http://postgr.es/m/CAA4eK1JxqqcuC5Un7YLQVhOYSZBS+t=3xqZuEkt5RyquyuxpwQ@mail.gmail.com
Commit 09cb5c0e7d added a similar
optimization to btree back in 2006, but nobody bothered to implement
the same thing for hash indexes, probably because they weren't
WAL-logged and had lots of other performance problems as well. As
with the corresponding btree case, this eliminates the problem of
potentially needing to refind our position within the page, and cuts
down on pin/unpin traffic as well.
Ashutosh Sharma, reviewed by Alexander Korotkov, Jesper Pedersen,
Amit Kapila, and me. Some final edits to comments and README by
me.
Discussion: http://postgr.es/m/CAE9k0Pm3KTx93K8_5j6VMzG4h5F+SyknxUwXrN-zqSZ9X8ZS3w@mail.gmail.com
This will be useful for hash partitioning, which needs a way to seed
the hash functions to avoid problems such as a hash index on a hash
partitioned table clumping all values into a small portion of the
bucket space; it's also useful for anything that wants a 64-bit hash
value rather than a 32-bit hash value.
Just in case somebody wants a 64-bit hash value that is compatible
with the existing 32-bit hash values, make the low 32-bits of the
64-bit hash value match the 32-bit hash value when the seed is 0.
Robert Haas and Amul Sul
Discussion: http://postgr.es/m/CA+Tgmoafx2yoJuhCQQOL5CocEi-w_uG4S2xT0EtgiJnPGcHW3g@mail.gmail.com
If it works, then we won't be storing two copies of all the tuples
that were just moved. If not, VACUUM will still take care of it
eventually. Per a report from AP and analysis from Amit Kapila, it
seems that a bulk load can cause splits fast enough that VACUUM won't
deal with the problem in time to prevent bloat.
Amit Kapila; I rewrote the comment.
Discussion: http://postgr.es/m/20170704105728.mwb72jebfmok2nm2@zip.com.au
One, logging for CREATE INDEX was oblivious to the fact that when
an unlogged table is created, *only* operations on the init fork
should be logged.
Two, init fork buffers need to be flushed after they are written;
otherwise, a filesystem-level copy following recovery may do the
wrong thing. (There may be a better fix for this issue than the
one used here, but this is transposed from the similar logic already
present in XLogReadBufferForRedoExtended, and a broader refactoring
after beta2 seems inadvisable.)
Amit Kapila, reviewed by Ashutosh Sharma, Kyotaro Horiguchi,
and Michael Paquier
Discussion: http://postgr.es/m/CAA4eK1JpcMsEtOL_J7WODumeEfyrPi7FPYHeVdS7fyyrCrgp4w@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Remove some gratuituous message differences by making the AM name
previously embedded in each message be a %s instead. While at it, get
rid of terminology that's unclear and unnecessary in one message.
Discussion: https://postgr.es/m/20170523001557.bq2hbq7hxyvyw62q@alvherre.pgsql
Standardize on testing a hash index page's type by doing
(opaque->hasho_flag & LH_PAGE_TYPE) == LH_xxx_PAGE
Various places were taking shortcuts like
opaque->hasho_flag & LH_BUCKET_PAGE
which while not actually wrong, is still bad practice because
it encourages use of
opaque->hasho_flag & LH_UNUSED_PAGE
which *is* wrong (LH_UNUSED_PAGE == 0, so the above is constant false).
hash_xlog.c's hash_mask() contained such an incorrect test.
This also ensures that we mask out the additional flag bits that
hasho_flag has accreted since 9.6. pgstattuple's pgstat_hash_page(),
for one, was failing to do that and was thus actively broken.
Also fix assorted comments that hadn't been updated to reflect the
extended usage of hasho_flag, and fix some macros that were testing
just "(hasho_flag & bit)" to use the less dangerous, project-approved
form "((hasho_flag & bit) != 0)".
Coverity found the bug in hash_mask(); I noted the one in
pgstat_hash_page() through code reading.
Make every page in a hash index which isn't all-zeroes have a valid
special space, so that tools like pageinspect don't error out.
Also, make pageinspect cope with all-zeroes pages, because
_hash_alloc_buckets can leave behind large numbers of those until
they're consumed by splits.
Ashutosh Sharma and Robert Haas, reviewed by Amit Kapila.
Original trouble report from Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1y6NjKmqbJ8wLMhr=F74WzcMALYWcVFhEpm7i=mV=XsOg@mail.gmail.com
Since hash indexes typically have very few overflow pages, adding a
new splitpoint essentially doubles the on-disk size of the index,
which can lead to large and abrupt increases in disk usage (and
perhaps long delays on occasion). To mitigate this problem to some
degree, divide larger splitpoints into four equal phases. This means
that, for example, instead of growing from 4GB to 8GB all at once, a
hash index will now grow from 4GB to 5GB to 6GB to 7GB to 8GB, which
is perhaps still not as smooth as we'd like but certainly an
improvement.
This changes the on-disk format of the metapage, so bump HASH_VERSION
from 2 to 3. This will force a REINDEX of all existing hash indexes,
but that's probably a good idea anyway. First, hash indexes from
pre-10 versions of PostgreSQL could easily be corrupted, and we don't
want to confuse corruption carried over from an older release with any
corruption caused despite the new write-ahead logging in v10. Second,
it will let us remove some backward-compatibility code added by commit
293e24e507.
Mithun Cy, reviewed by Amit Kapila, Jesper Pedersen and me. Regression
test outputs updated by me.
Discussion: http://postgr.es/m/CAD__OuhG6F1gQLCgMQNnMNgoCvOLQZz9zKYJQNYvYmmJoM42gA@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoYty0jCf-pa+m+vYUJ716+AxM7nv_syvyanyf5O-L_i2A@mail.gmail.com
In a couple of places, _hash_kill_items was mistakenly called with
the buffer lock not held. Repair.
Ashutosh Sharma, per a report from Andreas Seltenreich
Discussion: http://postgr.es/m/87o9wo8o0j.fsf@credativ.de
Most seriously, fix use of incorrect block ID, per a report from
Jeff Janes that it causes a crash and a diagnosis from Amit Kapila.
Improve consistency between the hash and btree versions of this
code by adding back a PANIC that btree has, and by registering
data in the xlog record in the same way, per complaints from
Jeff Janes and Amit Kapila.
Tidy up some minor cosmetic points, per complaints from Amit
Kapila.
Patch by Ashutosh Sharma, reviewed by Amit Kapila, and tested by
Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1w-9Qe=Ff1o6bSaXpNO9wqpo7_9GL8_CVhw4BoVVHasqg@mail.gmail.com
Clear LH_PAGE_HAS_DEAD_TUPLES during replay, similar to what gets done
for btree. Update hashdesc.c for xl_hash_vacuum_one_page.
Oversights in commit 6977b8b7f4 spotted
by Amit Kapila. Patch by Ashutosh Sharma.
Bump WAL version. The original patch to make hash indexes write-ahead
logged probably should have done this, and the single page vacuuming
patch probably should have done it again, but better late than never.
Discussion: http://postgr.es/m/CAA4eK1Kd=mJ9xreovcsh0qMiAj-QqCphHVQ_Lfau1DR9oVjASQ@mail.gmail.com
The warning about hash indexes not being write-ahead logged and their
use being discouraged has been removed. "snapshot too old" is now
supported for tables with hash indexes. Most importantly, barring
bugs, hash indexes will now be crash-safe and usable on standbys.
This commit doesn't yet add WAL consistency checking for hash
indexes, as we now have for other index types; a separate patch has
been submitted to cure that lack.
Amit Kapila, reviewed and slightly modified by me. The larger patch
series of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen.
Discussion: http://postgr.es/m/CAA4eK1JOBX=YU33631Qh-XivYXtPSALh514+jR8XeD7v+K3r_Q@mail.gmail.com
The primary goal here is to move all of the related page modifications
to a single section of code, in preparation for adding write-ahead
logging. In passing, rename _hash_metapinit to _hash_init, since it
initializes more than just the metapage.
Amit Kapila. The larger patch series of which this is a part has been
reviewed and tested by Álvaro Herrera, Ashutosh Sharma, Mark Kirkwood,
Jeff Janes, and Jesper Pedersen.
As with commit 30df93f698 and commit
b0f18cb77f, the goal here is to move all
of the related page modifications to a single section of code, in
preparation for adding write-ahead logging.
Amit Kapila, with slight changes by me. The larger patch series of
which this is a part has been reviewed and tested by Álvaro Herrera,
Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper Pedersen.
As with commit b0f18cb77f, the goal
here is to move all of the related page modifications to a single
section of code, in preparation for adding write-ahead logging.
Amit Kapila, with slight changes by me. The larger patch series
of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen, all of whom should also have been credited in the
previous commit message.
In preparation for adding write-ahead logging to hash indexes,
refactor _hash_freeovflpage and _hash_squeezebucket so that all
related page modifications happen in a single section of code. The
previous coding assumed that it would be fine to move tuples one at a
time, and also that the various operations involved in freeing an
overflow page didn't necessarily all need to be done together, all
of which is true if you don't care about write-ahead logging.
Amit Kapila, with slight changes by me.
In combination with 569174f1be, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
It did that to verify that the page was an overflow page rather than
anything else, but that means that checking the status of all the
overflow bits requires reading the entire index. So don't do that.
The new code validates that the page is not a primary bucket page
or bitmap page by looking at the metapage, so that using this on
large numbers of pages can be reasonably efficient.
Ashutosh Sharma, per a complaint from me, and with further
modifications by me.
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
This avoids a very significant amount of buffer manager traffic and
contention when scanning hash indexes, because it's no longer
necessary to lock and pin the metapage for every scan. We do need
some way of figuring out when the cache is too stale to use any more,
so that when we lock the primary bucket page to which the cached
metapage points us, we can tell whether a split has occurred since we
cached the metapage data. To do that, we use the hash_prevblkno field
in the primary bucket page, which would otherwise always be set to
InvalidBuffer.
This patch contains code so that it will continue working (although
less efficiently) with hash indexes built before this change, but
perhaps we should consider bumping the hash version and ripping out
the compatibility code. That decision can be made later, though.
Mithun Cy, reviewed by Jesper Pedersen, Amit Kapila, and by me.
Before committing, I made a number of cosmetic changes to the last
posted version of the patch, adjusted _hash_getcachedmetap to be more
careful about order of operation, and made some necessary updates to
the pageinspect documentation and regression tests.
Patch by Jesper Pedersen and Ashutosh Sharma, with some error handling
improvements by me. Tests from Peter Eisentraut. Reviewed by Álvaro
Herrera, Michael Paquier, Jesper Pedersen, Jeff Janes, Peter
Eisentraut, Amit Kapila, Mithun Cy, and me.
Discussion: http://postgr.es/m/e2ac6c58-b93f-9dd9-f4e6-d6d30add7fdf@redhat.com
This patch doesn't actually make any index AM parallel-aware, but it
provides the necessary functions at the AM layer to do so.
Rahila Syed, Amit Kapila, Robert Haas
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Instead of relying on the page contents to know whether we have
advanced from the primary bucket page to an overflow page, track
that explicitly.
Amit Kapila, per a complaint by me.
hashname() asserted that the key string it is given is shorter than
NAMEDATALEN. That should surely always be true if the input is in fact a
regular value of type "name". However, for reasons of coding convenience,
we allow plain old C strings to be treated as "name" values in many places.
Some SQL functions accept arbitrary "text" inputs, convert them to C
strings, and pass them otherwise-untransformed to syscache lookups for name
columns, allowing an overlength input value to trigger hashname's Assert.
This would be a DOS problem, except that it only happens in assert-enabled
builds which aren't recommended for production. In a production build,
you'll just get a name lookup error, since regardless of the hash value
computed by hashname, the later equality comparison checks can't match.
Likewise, if the catalog lookup is done by seqscan or indexscan searches,
there will just be a lookup error, since the name comparison functions
don't contain any similar length checks, and will see an overlength input
as unequal to any stored entry.
After discussion we concluded that we should simply remove this Assert.
It's inessential to hashname's own functionality, and having such an
assertion in only some paths for name lookup is more of a foot-gun than
a useful check. There may or may not be a case for the affected callers
to do something other than let the name lookup fail, but we'll consider
that separately; in any case we probably don't want to change such
behavior in the back branches.
Per report from Tushar Ahuja. Back-patch to all supported branches.
Report: https://postgr.es/m/7d0809ee-6f25-c9d6-8e74-5b2967830d49@enterprisedb.com
Discussion: https://postgr.es/m/17691.1482523168@sss.pgh.pa.us
This is basically for the same reasons I got rid of _hash_wrtbuf()
in commit 25216c98938495fd741bf585dcbef45b3a9ffd40: it's not
convenient to have a function which encapsulates MarkBufferDirty(),
especially as we move towards having hash indexes be WAL-logged.
Patch by me, reviewed (but not entirely endorsed) by Amit Kapila.
You can't just cast a HashMetaPage to a Page, because the meta page
data is stored after the page header, not at offset 0. Fortunately,
this didn't break anything because it happens to find hashm_bsize
at the offset at which it expects to find pd_pagesize_version, and
the values are close enough to the same that this works out.
Still, it's a bug, so back-patch to all supported versions.
Mithun Cy, revised a bit by me.
A bucket squeeze operation needs to lock each page of the bucket
before releasing the prior page, but the previous coding fumbled the
locking when freeing an overflow page during a bucket squeeze
operation. Commit 6d46f4783e
introduced this bug.
Amit Kapila, with help from Kuntal Ghosh and Dilip Kumar, after
an initial trouble report by Jeff Janes. Reviewed by me. I also
fixed a problem with a comment.
In _hash_freeovflpage(), if we're freeing the overflow page that
immediate follows the page to which tuples are being moved (the
confusingly-named "write buffer"), don't forget to mark that
page dirty after updating its hasho_nextblkno.
In _hash_squeezebucket(), it's not necessary to mark the primary
bucket page dirty if there are no overflow pages, because there's
nothing to squeeze in that case.
Amit Kapila, with help from Kuntal Ghosh and Dilip Kumar, after
an initial trouble report by Jeff Janes.
The whole concept of _hash_wrtbuf() is that we need to know at the
time we're releasing the buffer lock (and pin) whether we dirtied the
buffer, but this is easy to get wrong. This patch actually fixes one
non-obvious bug of that form: hashbucketcleanup forgot to signal
_hash_squeezebucket, which gets the primary bucket page already
locked, as to whether it had already dirtied the page. Calling
MarkBufferDirty() at the places where we dirty the buffer is more
intuitive and lets us simplify the code in various places as well.
On top of all that, the ultimate goal here is to make hash indexes
WAL-logged, and as the comments to _hash_wrtbuf() note, it should
go away when that happens. Making it go away a little earlier than
that seems like a good preparatory step.
Report by Jeff Janes. Diagnosis by Amit Kapila, Kuntal Ghosh,
and Dilip Kumar. Patch by me, after studying an alternative patch
submitted by Amit Kapila.
Discussion: http://postgr.es/m/CAA4eK1Kf6tOY0oVz_SEdngiNFkeXrA3xUSDPPORQvsWVPdKqnA@mail.gmail.com
Commit 6d46f4783e failed to account for
the possibility that hashbulkdelete() might encounter a bucket that
has been split since it began scanning the bucket array. Repair.
Extracted from a larger pathc by Amit Kapila; I rewrote the comment.
It's possible for the metapage contents to change after we release
the lock, so we must read them before releasing the lock.
Amit Kapila. Submitted in response to a trouble report from
Andreas Seltenreich, though it is not certain this fixes the
problem.
Previously, the right to split a bucket was represented by a
heavyweight lock on the page number of the primary bucket page.
Unfortunately, this meant that every scan needed to take a heavyweight
lock on that bucket also, which was bad for concurrency. Instead, use
a cleanup lock on the primary bucket page to indicate the right to
begin a split, so that scans only need to retain a pin on that page,
which is they would have to acquire anyway, and which is also much
cheaper.
In addition to reducing the locking cost, this also avoids locking out
scans and inserts for the entire lifetime of the split: while the new
bucket is being populated with copies of the appropriate tuples from
the old bucket, scans and inserts can happen in parallel. There are
minor concurrency improvements for vacuum operations as well, though
the situation there is still far from ideal.
This patch also removes the unworldly assumption that a split will
never be interrupted. With the new code, a split is done in a series
of small steps and the system can pick up where it left off if it is
interrupted prior to completion. While this patch does not itself add
write-ahead logging for hash indexes, it is clearly a necessary first
step, since one of the things that could interrupt a split is the
removal of electrical power from the machine performing it.
Amit Kapila. I wrote the original design on which this patch is
based, and did a good bit of work on the comments and README through
multiple rounds of review, but all of the code is Amit's. Also
reviewed by Jesper Pedersen, Jeff Janes, and others.
Discussion: http://postgr.es/m/CAA4eK1LfzcZYxLoXS874Ad0+S-ZM60U9bwcyiUZx9mHZ-KCWhw@mail.gmail.com
When squeezing a bucket during vacuum, it's not necessary to retain
any tuples already marked as dead, so ignore them when deciding which
tuples must be moved in order to empty a bucket page. Similarly, when
splitting a bucket, relocating dead tuples to the new bucket is a
waste of effort; instead, just ignore them.
Amit Kapila, reviewed by me. Testing help provided by Ashutosh
Sharma.
These functions were originally added in commit d8cedf67a to support
use of int2vector columns as catcache lookup keys. However, there are
no catcaches that use such columns. (Indeed I now think it must always
have been dead code: a catcache with such a key column would need an
underlying unique index on the column, but we've never had an int2vector
btree opclass.)
Getting rid of the int2vector-specific operator and function does not
lose any functionality, because operations on int2vectors will now fall
back to the generic anyarray support. This avoids a wart that a btree
index on an int2vector column (made using anyarray_ops) would fail to
match equality searches, because int2vectoreq wasn't a member of the
opclass. We don't really care much about that, since int2vector is not
meant as a type for users to use, but it's silly to have extra code and
less functionality.
If we ever do want a catcache to be indexed by an int2vector column,
we'd need to put back full btree and hash opclasses for int2vector,
comparable to the support for oidvector. (The anyarray code can't be
used at such a low level, because it needs to do catcache lookups.)
But we'll deal with that if/when the need arises.
Also worth noting is that removal of the hash int2vector_ops opclass will
break any user-created hash indexes on int2vector columns. While hash
anyarray_ops would serve the same purpose, it would probably not compute
the same hash values and thus wouldn't be on-disk-compatible. Given that
int2vector isn't a user-facing type and we're planning other incompatible
changes in hash indexes for v10 anyway, this doesn't seem like something
to worry about, but it's probably worth mentioning here.
Amit Langote
Discussion: <d9bb74f8-b194-7307-9ebd-90645d377e45@lab.ntt.co.jp>
Since the hash AM is going to be revamped to have WAL, this is a good
opportunity to clean up the include file a little bit to avoid including
a lot of extra stuff in the future.
Author: Amit Kapila
Bruce Momjian
Michael Paquier
Amit Kapila
Andres Freund
Tom Lane
Alvaro Herrera
Peter Eisentraut
Peter Eisentraut
Teodor Sigaev
Robert Haas
Magnus Hagander
Heikki Linnakangas