Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Pass it the RestrictInfo under consideration, not just the
clause_relids. This should save some trivial amount of
code at the call sites, and it gives us more flexibility
about what clause_is_computable_at() does. There's no
actual functional change here, though.
Discussion: https://postgr.es/m/3564467.1684352557@sss.pgh.pa.us
After applying outer-join identity 3 in the forward direction,
it was possible for the planner to mistakenly apply a qual clause
from above the two outer joins at the now-lower join level.
This can give the wrong answer, since a value that would get nulled
by the now-upper join might not yet be null.
To fix, when we perform such a transformation, consider that the
now-lower join hasn't really completed the outer join it's nominally
responsible for and thus its relid set should not include that OJ's
relid (nor should its output Vars have that nullingrel bit set).
Instead we add those bits when the now-upper join is performed.
The existing rules for qual placement then suffice to prevent
higher qual clauses from dropping below the now-upper join.
There are a few complications from needing to consider transitive
closures in case multiple pushdowns have happened, but all in all
it's not a very complex patch.
This is all new logic (from 2489d76c4) so no need to back-patch.
The added test cases all have the same results as in v15.
Tom Lane and Richard Guo
Discussion: https://postgr.es/m/0b819232-4b50-f245-1c7d-c8c61bf41827@postgrespro.ru
It's possible, in admittedly-rather-contrived cases, for an eclass
to generate a derived "join" qual that constrains the post-outer-join
value(s) of some RHS variable(s) without mentioning the LHS at all.
While the mechanisms were set up to work for this, we fell foul of
the "get_common_eclass_indexes" filter installed by commit 3373c7155:
it could decide that such an eclass wasn't relevant to the join, so
that the required qual clause wouldn't get emitted there or anywhere
else.
To fix, apply get_common_eclass_indexes only at inner joins, where
its rule is still valid. At an outer join, fall back to examining all
eclasses that mention either input (or the OJ relid, though it should
be impossible for an eclass to mention that without mentioning either
input). Perhaps we can improve on that later, but the cost/benefit of
adding more complexity to skip some irrelevant eclasses is dubious.
To allow cheaply distinguishing outer from inner joins, pass the
ojrelid to generate_join_implied_equalities as a separate argument.
This also allows cleaning up some sloppiness that had crept into
the definition of its join_relids argument, and it allows accurate
calculation of nominal_join_relids for a child outer join. (The
latter oversight seems not to have been a live bug, but it certainly
could have caused problems in future.)
Also fix what might be a live bug in check_index_predicates: it was
being sloppy about what it passed to generate_join_implied_equalities.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs4-DsTBfOvXuw64GdFss2=M5cwtEhY=0DCS7t2gT7P6hSA@mail.gmail.com
The RelOptInfo->userid field (the user ID to check permissions as) of an
"otherrel" relation was being copied from its parent relation, which is
correct in most cases but wrong when the parent is a subquery. In that
case, using the value from the RTEPermissionInfo of the child itself is
the appropriate thing to do.
Coming up with a test case where user-visible behavior changes proves
hard enough, so we don't add one here.
Bug introduced by a61b1f7482, discovered by Amit while reviewing
nearby code.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqE0WY_AhLnGtTsY7eYebG212XWbM-D8gr2A_ToOHyCywQ@mail.gmail.com
The code I added in fee7b77b9 could misbehave if commute_above_r
contains multiple relids. While adding too many relids here is
probably harmless (pre-fee7b77b9, we did it all the time), it's
not very expensive to be accurate: we just have to intersect
commute_above_r with the join's relids.
Discussion: https://postgr.es/m/17781-c0405c8b3cd5e072@postgresql.org
The logic for when to add the current outer join's own relid
to the nullingrels sets of output Vars and PHVs was overly
complicated and underly correct. Not sure why I didn't think
of this before, but since what we want is marking per the
syntactic structure, we can just consult our records about
the syntactic structure, ie syn_righthand/syn_lefthand.
Also, tighten the rule about when to add the commute_above_r
bits, in hopes of eliminating some squishy reasoning. I do not
know of a reason to think that that's broken as-is, but this way
seems better.
Per bug #17781 from Robins Tharakan.
Discussion: https://postgr.es/m/17781-c0405c8b3cd5e072@postgresql.org
Remove RestrictInfo.nullable_relids, along with a good deal of
infrastructure that calculated it. One use-case for it was in
join_clause_is_movable_to, but we can now replace that usage with
a check to see if the clause's relids include any outer join
that can null the target relation. The other use-case was in
join_clause_is_movable_into, but that test can just be dropped
entirely now that the clause's relids include outer joins.
Furthermore, join_clause_is_movable_into should now be
accurate enough that it will accept anything returned by
generate_join_implied_equalities, so we can restore the Assert
that was diked out in commit 95f4e59c3.
Remove the outerjoin_delayed mechanism. We needed this before to
prevent quals from getting evaluated below outer joins that should
null some of their vars. Now that we consider varnullingrels while
placing quals, that's taken care of automatically, so throw the
whole thing away.
Teach remove_useless_result_rtes to also remove useless FromExprs.
Having done that, the delay_upper_joins flag serves no purpose any
more and we can remove it, largely reverting 11086f2f2.
Use constant TRUE for "dummy" clauses when throwing back outer joins.
This improves on a hack I introduced in commit 6a6522529. If we
have a left-join clause l.x = r.y, and a WHERE clause l.x = constant,
we generate r.y = constant and then don't really have a need for the
join clause. But we must throw the join clause back anyway after
marking it redundant, so that the join search heuristics won't think
this is a clauseless join and avoid it. That was a kluge introduced
under time pressure, and after looking at it I thought of a better
way: let's just introduce constant-TRUE "join clauses" instead,
and get rid of them at the end. This improves the generated plans for
such cases by not having to test a redundant join clause. We can also
get rid of the ugly hack used to mark such clauses as redundant for
selectivity estimation.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
Traditionally we used the same Var struct to represent the value
of a table column everywhere in parse and plan trees. This choice
predates our support for SQL outer joins, and it's really a pretty
bad idea with outer joins, because the Var's value can depend on
where it is in the tree: it might go to NULL above an outer join.
So expression nodes that are equal() per equalfuncs.c might not
represent the same value, which is a huge correctness hazard for
the planner.
To improve this, decorate Var nodes with a bitmapset showing
which outer joins (identified by RTE indexes) may have nulled
them at the point in the parse tree where the Var appears.
This allows us to trust that equal() Vars represent the same value.
A certain amount of klugery is still needed to cope with cases
where we re-order two outer joins, but it's possible to make it
work without sacrificing that core principle. PlaceHolderVars
receive similar decoration for the same reason.
In the planner, we include these outer join bitmapsets into the relids
that an expression is considered to depend on, and in consequence also
add outer-join relids to the relids of join RelOptInfos. This allows
us to correctly perceive whether an expression can be calculated above
or below a particular outer join.
This change affects FDWs that want to plan foreign joins. They *must*
follow suit when labeling foreign joins in order to match with the
core planner, but for many purposes (if postgres_fdw is any guide)
they'd prefer to consider only base relations within the join.
To support both requirements, redefine ForeignScan.fs_relids as
base+OJ relids, and add a new field fs_base_relids that's set up by
the core planner.
Large though it is, this commit just does the minimum necessary to
install the new mechanisms and get check-world passing again.
Follow-up patches will perform some cleanup. (The README additions
and comments mention some stuff that will appear in the follow-up.)
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
RelOptInfo.userid is the same for all relations in a given inheritance
tree, so the code in examine_variable() and example_simple_variable()
that repeats the ACL checks on the root parent rel instead of a given
leaf child relations need not recompute userid too.
Author: Amit Langote <amitlangote09@gmail.com>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20221210201753.GA27893@telsasoft.com
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
The present implementations of adjust_appendrel_attrs_multilevel and
its sibling adjust_child_relids_multilevel are very messy, because
they work by reconstructing the relids of the child's immediate
parent and then seeing if that's bms_equal to the relids of the
target parent. Aside from being quite inefficient, this will not
work with planned future changes to make joinrels' relid sets
contain outer-join relids in addition to baserels.
The whole thing can be solved at a stroke by adding explicit parent
and top_parent links to child RelOptInfos, and making these functions
work with RelOptInfo pointers instead of relids. Doing that is
simpler for most callers, too.
In my original version of this patch, I got rid of
RelOptInfo.top_parent_relids on the grounds that it was now redundant.
However, that adds a lot of code churn in places that otherwise would
not need changing, and arguably the extra indirection needed to fetch
top_parent->relids in those places costs something. So this version
leaves that field in place.
Discussion: https://postgr.es/m/553080.1657481916@sss.pgh.pa.us
Make build_joinrel_tlist() responsible for adding PHVs that were
already computed in one or the other input relation, and therefore
change add_placeholders_to_joinrel() to only add PHVs that will be
newly computed in this joinrel's output. This makes the handling
of PHVs in build_joinrel_tlist() more like its handling of plain
Vars, which seems like a good thing on intelligibility grounds
and will simplify planned future changes. There is a purely
cosmetic side-effect that the order of entries in the joinrel's
tlist may change; but since it becomes more like the order of
entries in the input tlists, that's not bad.
The reason it wasn't done like this originally was the potential
cost of looking up PlaceHolderInfo entries to consult ph_needed.
Now that that's O(1) it shouldn't hurt.
Discussion: https://postgr.es/m/1405792.1660677844@sss.pgh.pa.us
For partitioned tables with large numbers of partitions where queries are
able to prune all but a very small number of partitions, the time spent in
the planner looping over RelOptInfo.part_rels checking for non-NULL
RelOptInfos could become a large portion of the overall planning time.
Here we add a Bitmapset that records the non-pruned partitions. This
allows us to more efficiently skip the pruned partitions by looping over
the Bitmapset.
This will cause a very slight slow down in cases where no or not many
partitions could be pruned, however, those cases are already slow to plan
anyway and the overhead of looping over the Bitmapset would be
unmeasurable when compared with the other tasks such as path creation for
a large number of partitions.
Reviewed-by: Amit Langote, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqnPx6JnUuPwaf5ao38zczrAb9mxt9gj4U1EKFfd4AqLA@mail.gmail.com
This patch makes two closely related sets of changes:
1. For UPDATE, the subplan of the ModifyTable node now only delivers
the new values of the changed columns (i.e., the expressions computed
in the query's SET clause) plus row identity information such as CTID.
ModifyTable must re-fetch the original tuple to merge in the old
values of any unchanged columns. The core advantage of this is that
the changed columns are uniform across all tables of an inherited or
partitioned target relation, whereas the other columns might not be.
A secondary advantage, when the UPDATE involves joins, is that less
data needs to pass through the plan tree. The disadvantage of course
is an extra fetch of each tuple to be updated. However, that seems to
be very nearly free in context; even worst-case tests don't show it to
add more than a couple percent to the total query cost. At some point
it might be interesting to combine the re-fetch with the tuple access
that ModifyTable must do anyway to mark the old tuple dead; but that
would require a good deal of refactoring and it seems it wouldn't buy
all that much, so this patch doesn't attempt it.
2. For inherited UPDATE/DELETE, instead of generating a separate
subplan for each target relation, we now generate a single subplan
that is just exactly like a SELECT's plan, then stick ModifyTable
on top of that. To let ModifyTable know which target relation a
given incoming row refers to, a tableoid junk column is added to
the row identity information. This gets rid of the horrid hack
that was inheritance_planner(), eliminating O(N^2) planning cost
and memory consumption in cases where there were many unprunable
target relations.
Point 2 of course requires point 1, so that there is a uniform
definition of the non-junk columns to be returned by the subplan.
We can't insist on uniform definition of the row identity junk
columns however, if we want to keep the ability to have both
plain and foreign tables in a partitioning hierarchy. Since
it wouldn't scale very far to have every child table have its
own row identity column, this patch includes provisions to merge
similar row identity columns into one column of the subplan result.
In particular, we can merge the whole-row Vars typically used as
row identity by FDWs into one column by pretending they are type
RECORD. (It's still okay for the actual composite Datums to be
labeled with the table's rowtype OID, though.)
There is more that can be done to file down residual inefficiencies
in this patch, but it seems to be committable now.
FDW authors should note several API changes:
* The argument list for AddForeignUpdateTargets() has changed, and so
has the method it must use for adding junk columns to the query. Call
add_row_identity_var() instead of manipulating the parse tree directly.
You might want to reconsider exactly what you're adding, too.
* PlanDirectModify() must now work a little harder to find the
ForeignScan plan node; if the foreign table is part of a partitioning
hierarchy then the ForeignScan might not be the direct child of
ModifyTable. See postgres_fdw for sample code.
* To check whether a relation is a target relation, it's no
longer sufficient to compare its relid to root->parse->resultRelation.
Instead, check it against all_result_relids or leaf_result_relids,
as appropriate.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
Previously we only tagged on the required information to allow the
executor to perform run-time partition pruning for Append/MergeAppend
nodes belonging to base relations. It was thought that nested
Append/MergeAppend nodes were just about always pulled up into the
top-level Append/MergeAppend and that making the run-time pruning info for
any sub Append/MergeAppend nodes was a waste of time. However, that was
likely badly thought through.
Some examples of cases we're unable to pullup nested Append/MergeAppends
are: 1) Parallel Append nodes with a mix of parallel and non-parallel
paths into a Parallel Append. 2) When planning an ordered Append scan a
sub-partition which is unordered may require a nested MergeAppend path to
ensure sub-partitions don't mix up the order of tuples being fed into the
top-level Append.
Unfortunately, it was not just as simple as removing the lines in
createplan.c which were purposefully not building the run-time pruning
info for anything but RELOPT_BASEREL relations. The code in
add_paths_to_append_rel() was far too sloppy about which partitioned_rels
it included for the Append/MergeAppend paths. The original code there
would always assume accumulate_append_subpath() would pull each sub-Append
and sub-MergeAppend path into the top-level path. While it does not
appear that there were any actual bugs caused by having the additional
partitioned table RT indexes recorded, what it did mean is that later in
planning, when we built the run-time pruning info that we wasted effort
and built PartitionedRelPruneInfos for partitioned tables that we had no
subpaths for the executor to run-time prune.
Here we tighten that up so that partitioned_rels only ever contains the RT
index for partitioned tables which actually have subpaths in the given
Append/MergeAppend. We can now Assert that every PartitionedRelPruneInfo
has a non-empty present_parts. That should allow us to catch any weird
corner cases that have been missed.
In passing, it seems there is no longer a good reason to have the
AppendPath and MergeAppendPath's partitioned_rel fields a List of IntList.
We can simply have a List of Relids instead. This is more compact in
memory and faster to add new members to. We still know which is the root
level partition as these always have a lower relid than their children.
Previously this field was used for more things, but run-time partition
pruning now remains the only user of it and it has no need for a List of
IntLists.
Here we also get rid of the RelOptInfo partitioned_child_rels field. This
is what was previously used to (sometimes incorrectly) set the
Append/MergeAppend path's partitioned_rels field. That was the only usage
of that field, so we can happily just remove it.
I also couldn't resist changing some nearby code to make use of the newly
added for_each_from macro so we can skip the first element in the list
without checking if the current item was the first one on each
iteration.
A bug report from Andreas Kretschmer prompted all this work, however,
after some consideration, I'm not personally classing this as a bug fix.
So no backpatch. In Andreas' test case, it just wasn't that clear that
there was a nested Append since the top-level Append just had a single
sub-path which was pulled up a level, per 8edd0e794.
Author: David Rowley
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/flat/CAApHDvqSchs%2BubdybcfFaSPB%2B%2BEA7kqMaoqajtP0GtZvzOOR3g%40mail.gmail.com
This case didn't work because columns merged by FULL JOIN USING are
represented in the parse tree by COALESCE expressions, and the logic
for recognizing a partitionable join failed to match upper-level join
clauses to such expressions. To fix, synthesize suitable COALESCE
expressions and add them to the nullable_partexprs lists. This is
pretty ugly and brute-force, but it gets the job done. (I have
ambitions of rethinking the way outer-join output Vars are
represented, so maybe that will provide a cleaner solution someday.
For now, do this.)
Amit Langote, reviewed by Justin Pryzby, Richard Guo, and myself
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
Previously, the partitionwise join technique only allowed partitionwise
join when input partitioned tables had exactly the same partition
bounds. This commit extends the technique to some cases when the tables
have different partition bounds, by using an advanced partition-matching
algorithm introduced by this commit. For both the input partitioned
tables, the algorithm checks whether every partition of one input
partitioned table only matches one partition of the other input
partitioned table at most, and vice versa. In such a case the join
between the tables can be broken down into joins between the matching
partitions, so the algorithm produces the pairs of the matching
partitions, plus the partition bounds for the join relation, to allow
partitionwise join for computing the join. Currently, the algorithm
works for list-partitioned and range-partitioned tables, but not
hash-partitioned tables. See comments in partition_bounds_merge().
Ashutosh Bapat and Etsuro Fujita, most of regression tests by Rajkumar
Raghuwanshi, some of the tests by Mark Dilger and Amul Sul, reviewed by
Dmitry Dolgov and Amul Sul, with additional review at various points by
Ashutosh Bapat, Mark Dilger, Robert Haas, Antonin Houska, Amit Langote,
Justin Pryzby, and Tomas Vondra
Discussion: https://postgr.es/m/CAFjFpRdjQvaUEV5DJX3TW6pU5eq54NCkadtxHX2JiJG_GvbrCA@mail.gmail.com
Move have_partkey_equi_join and match_expr_to_partition_keys to
relnode.c, since they're used only there. Refactor
build_joinrel_partition_info to split out the code that fills the
joinrel's partition key lists; this doesn't have any non-cosmetic
impact, but it seems like a useful separation of concerns.
Improve assorted nearby comments.
Amit Langote, with a little further editorialization by me
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
Commit d25ea0127 got rid of what I thought were entirely unnecessary
derived child expressions in EquivalenceClasses for EC members that
mention multiple baserels. But it turns out that some of the child
expressions that code created are necessary for partitionwise joins,
else we fail to find matching pathkeys for Sort nodes. (This happens
only for certain shapes of the resulting plan; it may be that
partitionwise aggregation is also necessary to show the failure,
though I'm not sure of that.)
Reverting that commit entirely would be quite painful performance-wise
for large partition sets. So instead, add code that explicitly
generates child expressions that match only partitionwise child join
rels we have actually generated.
Per report from Justin Pryzby. (Amit Langote noticed the problem
earlier, though it's not clear if he recognized then that it could
result in a planner error, not merely failure to exploit partitionwise
join, in the code as-committed.) Back-patch to v12 where commit
d25ea0127 came in.
Amit Langote, with lots of kibitzing from me
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
Discussion: https://postgr.es/m/20191011143703.GN10470@telsasoft.com
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
Merge setup_append_rel_array into setup_simple_rel_arrays. There's no
particularly good reason to keep them separate, and it's inconsistent
with the lack of separation in expand_planner_arrays. The only apparent
benefit was that the fast path for trivial queries in query_planner()
doesn't need to set up the append_rel_array; but all we're saving there
is an if-test and NULL assignment, which surely ought to be negligible.
Also improve some obsolete comments.
Discussion: https://postgr.es/m/17220.1565301350@sss.pgh.pa.us
Previously in order to determine which ECs a relation had members in, we
had to loop over all ECs stored in PlannerInfo's eq_classes and check if
ec_relids mentioned the relation. For the most part, this was fine, as
generally, unless queries were fairly complex, the overhead of performing
the lookup would have not been that significant. However, when queries
contained large numbers of joins and ECs, the overhead to find the set of
classes matching a given set of relations could become a significant
portion of the overall planning effort.
Here we allow a much more efficient method to access the ECs which match a
given relation or set of relations. A new Bitmapset field in RelOptInfo
now exists to store the indexes into PlannerInfo's eq_classes list which
each relation is mentioned in. This allows very fast lookups to find all
ECs belonging to a single relation. When we need to lookup ECs belonging
to a given pair of relations, we can simply bitwise-AND the Bitmapsets from
each relation and use the result to perform the lookup.
We also take the opportunity to write a new implementation of
generate_join_implied_equalities which makes use of the new indexes.
generate_join_implied_equalities_for_ecs must remain as is as it can be
given a custom list of ECs, which we can't easily determine the indexes of.
This was originally intended to fix the performance penalty of looking up
foreign keys matching a join condition which was introduced by 100340e2d.
However, we're speeding up much more than just that here.
Author: David Rowley, Tom Lane
Reviewed-by: Tom Lane, Tomas Vondra
Discussion: https://postgr.es/m/6970.1545327857@sss.pgh.pa.us
We can set this up once and for all in subquery_planner's initial survey
of the flattened rangetable, rather than incrementally adjusting it in
build_simple_rel. The previous approach made it rather hard to reason
about exactly when the value would be available, and we were definitely
using it in some places before the final value was computed.
Noted while fooling around with Amit Langote's patch to delay creation
of inheritance child rels. That didn't break this code, but it made it
even more fragile, IMO.
Previously, the planner created RangeTblEntry and RelOptInfo structs
for every partition of a partitioned table, even though many of them
might later be deemed uninteresting thanks to partition pruning logic.
This incurred significant overhead when there are many partitions.
Arrange to postpone creation of these data structures until after
we've processed the query enough to identify restriction quals for
the partitioned table, and then apply partition pruning before not
after creation of each partition's data structures. In this way
we need not open the partition relations at all for partitions that
the planner has no real interest in.
For queries that can be proven at plan time to access only a small
number of partitions, this patch improves the practical maximum
number of partitions from under 100 to perhaps a few thousand.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
Up to now, otherrel RelOptInfos were built at the same time as baserel
RelOptInfos, thanks to recursion in build_simple_rel(). However,
nothing in query_planner's preprocessing cares at all about otherrels,
only baserels, so we don't really need to build them until just before
we enter make_one_rel. This has two benefits:
* create_lateral_join_info did a lot of extra work to propagate
lateral-reference information from parents to the correct children.
But if we delay creation of the children till after that, it's
trivial (and much harder to break, too).
* Since we have all the restriction quals correctly assigned to
parent appendrels by this point, it'll be possible to do plan-time
pruning and never make child RelOptInfos at all for partitions that
can be pruned away. That's not done here, but will be later on.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
Up to now postgres_fdw has been using create_foreignscan_path() to
generate not only base-relation paths, but also paths for foreign joins
and foreign upperrels. This is wrong, because create_foreignscan_path()
calls get_baserel_parampathinfo() which will only do the right thing for
baserels. It accidentally fails to fail for unparameterized paths, which
are the only ones postgres_fdw (thought it) was handling, but we really
need different APIs for the baserel and join cases.
In HEAD, the best thing to do seems to be to split up the baserel,
joinrel, and upperrel cases into three functions so that they can
have different APIs. I haven't actually given create_foreign_join_path
a different API in this commit: we should spend a bit of time thinking
about just what we want to do there, since perhaps FDWs would want to
do something different from the build-up-a-join-pairwise approach that
get_joinrel_parampathinfo expects. In the meantime, since postgres_fdw
isn't prepared to generate parameterized joins anyway, just give it a
defense against trying to plan joins with lateral refs.
In addition (and this is what triggered this whole mess) fix bug #15613
from Srinivasan S A, by teaching file_fdw and postgres_fdw that plain
baserel foreign paths still have outer refs if the relation has
lateral_relids. Add some assertions in relnode.c to catch future
occurrences of the same error --- in particular, to catch other FDWs
doing that, but also as backstop against core-code mistakes like the
one fixed by commit bdd9a99aa.
Bug #15613 also needs to be fixed in the back branches, but the
appropriate fix will look quite a bit different there, since we don't
want to assume that existing FDWs get the word right away.
Discussion: https://postgr.es/m/15613-092be1be9576c728@postgresql.org
The fact that "SELECT expression" has no base relations has long been a
thorn in the side of the planner. It makes it hard to flatten a sub-query
that looks like that, or is a trivial VALUES() item, because the planner
generally uses relid sets to identify sub-relations, and such a sub-query
would have an empty relid set if we flattened it. prepjointree.c contains
some baroque logic that works around this in certain special cases --- but
there is a much better answer. We can replace an empty FROM clause with a
dummy RTE that acts like a table of one row and no columns, and then there
are no such corner cases to worry about. Instead we need some logic to
get rid of useless dummy RTEs, but that's simpler and covers more cases
than what was there before.
For really trivial cases, where the query is just "SELECT expression" and
nothing else, there's a hazard that adding the extra RTE makes for a
noticeable slowdown; even though it's not much processing, there's not
that much for the planner to do overall. However testing says that the
penalty is very small, close to the noise level. In more complex queries,
this is able to find optimizations that we could not find before.
The new RTE type is called RTE_RESULT, since the "scan" plan type it
gives rise to is a Result node (the same plan we produced for a "SELECT
expression" query before). To avoid confusion, rename the old ResultPath
path type to GroupResultPath, reflecting that it's only used in degenerate
grouping cases where we know the query produces just one grouped row.
(It wouldn't work to unify the two cases, because there are different
rules about where the associated quals live during query_planner.)
Note: although this touches readfuncs.c, I don't think a catversion
bump is required, because the added case can't occur in stored rules,
only plans.
Patch by me, reviewed by David Rowley and Mark Dilger
Discussion: https://postgr.es/m/15944.1521127664@sss.pgh.pa.us
This commit moves expand_inherited_tables and underlings from
optimizer/prep/prepunionc.c to optimizer/utils/inherit.c.
Also, all of the AppendRelInfo-based expression manipulation routines
are moved to optimizer/utils/appendinfo.c.
No functional code changes. One exception is the introduction of
make_append_rel_info, but that's still just moving around code.
Also, stop including <limits.h> in prepunion.c, which no longer needs
it since 3fc6e2d7f5. I (Álvaro) noticed this because Amit was copying
that to inherit.c, which likewise doesn't need it.
Author: Amit Langote
Discussion: https://postgr.es/m/3be67028-a00a-502c-199a-da00eec8fb6e@lab.ntt.co.jp
Commit f49842d, which added support for partitionwise joins, built the
child's tlist by applying adjust_appendrel_attrs() to the parent's. So in
the case where the parent's included a whole-row Var for the parent, the
child's contained a ConvertRowtypeExpr. To cope with that, that commit
added code to the planner, such as setrefs.c, but some code paths still
assumed that the tlist for a scan (or join) rel would only include Vars
and PlaceHolderVars, which was true before that commit, causing errors:
* When creating an explicit sort node for an input path for a mergejoin
path for a child join, prepare_sort_from_pathkeys() threw the 'could not
find pathkey item to sort' error.
* When deparsing a relation participating in a pushed down child join as a
subquery in contrib/postgres_fdw, get_relation_column_alias_ids() threw
the 'unexpected expression in subquery output' error.
* When performing set_plan_references() on a local join plan generated by
contrib/postgres_fdw for EvalPlanQual support for a pushed down child
join, fix_join_expr() threw the 'variable not found in subplan target
lists' error.
To fix these, two approaches have been proposed: one by Ashutosh Bapat and
one by me. While the former keeps building the child's tlist with a
ConvertRowtypeExpr, the latter builds it with a whole-row Var for the
child not to violate the planner assumption, and tries to fix it up later,
But both approaches need more work, so refuse to generate partitionwise
join paths when whole-row Vars are involved, instead. We don't need to
handle ConvertRowtypeExprs in the child's tlists for now, so this commit
also removes the changes to the planner.
Previously, partitionwise join computed attr_needed data for each child
separately, and built the child join's tlist using that data, which also
required an extra step for adding PlaceHolderVars to that tlist, but it
would be more efficient to build it from the parent join's tlist through
the adjust_appendrel_attrs() transformation. So this commit builds that
list that way, and simplifies build_joinrel_tlist() and placeholder.c as
well as part of set_append_rel_size() to basically what they were before
partitionwise join went in.
Back-patch to PG11 where partitionwise join was introduced.
Report by Rajkumar Raghuwanshi. Analysis by Ashutosh Bapat, who also
provided some of regression tests. Patch by me, reviewed by Robert Haas.
Discussion: https://postgr.es/m/CAKcux6ktu-8tefLWtQuuZBYFaZA83vUzuRd7c1YHC-yEWyYFpg@mail.gmail.com
find_appinfos_by_relids had quite a large overhead when the number of
items in the append_rel_list was high, as it had to trawl through the
append_rel_list looking for AppendRelInfos belonging to the given
childrelids. Since there can only be a single AppendRelInfo for each
child rel, it seems much better to store an array in PlannerInfo which
indexes these by child relid, making the function O(1) rather than O(N).
This function was only called once inside the planner, so just replace
that call with a lookup to the new array. find_childrel_appendrelinfo
is now unused and thus removed.
This fixes a planner performance regression new to v11 reported by
Thomas Reiss.
Author: David Rowley
Reported-by: Thomas Reiss
Reviewed-by: Ashutosh Bapat
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/94dd7a4b-5e50-0712-911d-2278e055c622@dalibo.com
On further reflection, commit e5d83995e didn't go far enough: pretty much
everywhere in the planner that examines a clause's is_pushed_down flag
ought to be changed to use the more complicated behavior where we also
check the clause's required_relids. Otherwise we could make incorrect
decisions about whether, say, a clause is safe to use as a hash clause.
Some (many?) of these places are safe as-is, either because they are
never reached while considering a parameterized path, or because there
are additional checks that would reject a pushed-down clause anyway.
However, it seems smarter to just code them all the same way rather
than rely on easily-broken reasoning of that sort.
In support of that, invent a new macro RINFO_IS_PUSHED_DOWN that should
be used in place of direct tests on the is_pushed_down flag.
Like the previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/f8128b11-c5bf-3539-48cd-234178b2314d@proxel.se
Add a new module backend/partitioning/partprune.c, implementing a more
sophisticated algorithm for partition pruning. The new module uses each
partition's "boundinfo" for pruning instead of constraint exclusion,
based on an idea proposed by Robert Haas of a "pruning program": a list
of steps generated from the query quals which are run iteratively to
obtain a list of partitions that must be scanned in order to satisfy
those quals.
At present, this targets planner-time partition pruning, but there exist
further patches to apply partition pruning at execution time as well.
This commit also moves some definitions from include/catalog/partition.h
to a new file include/partitioning/partbounds.h, in an attempt to
rationalize partitioning related code.
Authors: Amit Langote, David Rowley, Dilip Kumar
Reviewers: Robert Haas, Kyotaro Horiguchi, Ashutosh Bapat, Jesper Pedersen.
Discussion: https://postgr.es/m/098b9c71-1915-1a2a-8d52-1a7a50ce79e8@lab.ntt.co.jp
The previous code assumed that we'd always succeed in creating
child-joins for a joinrel for which partition-wise join was considered,
but that's not guaranteed, at least in the case where dummy rels
are involved.
Ashutosh Bapat, with some wordsmithing by me.
Discussion: http://postgr.es/m/CAFjFpRf8=uyMYYfeTBjWDMs1tR5t--FgOe2vKZPULxxdYQ4RNw@mail.gmail.com
Tom Lane
Alvaro Herrera
Bruce Momjian
Peter Eisentraut
David Rowley
Etsuro Fujita
Peter Eisentraut
Robert Haas