Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
This adds a new psql command \bind that sets query parameters and
causes the next query to be sent using the extended query protocol.
Example:
SELECT $1, $2 \bind 'foo' 'bar' \g
This may be useful for psql scripting, but one of the main purposes is
also to be able to test various aspects of the extended query protocol
from psql and to write tests more easily.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/e8dd1cd5-0e04-3598-0518-a605159fe314@enterprisedb.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a51306722 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Instead of immediately PQfinish'ing a dead connection, save it aside
so that we can still extract its parameters for \connect attempts.
(This works because PQconninfo doesn't care whether the PGconn is in
CONNECTION_BAD state.) This allows developers to reconnect with
just \c after a database crash and restart.
It's tempting to use the same approach instead of closing the old
connection after a failed non-interactive \connect command. However,
that would not be very safe: consider a script containing
\c db1 user1 live_server
\c db2 user2 dead_server
\c db3
The script would be expecting to connect to db3 at dead_server, but
if we re-use parameters from the first connection then it might
successfully connect to db3 at live_server. This'd defeat the goal
of not letting a script accidentally execute commands against the
wrong database.
Discussion: https://postgr.es/m/38464.1603394584@sss.pgh.pa.us
We invented \gx to allow the "\pset expanded" flag to be forced on
for the duration of one command output, but that turns out to not
be nearly enough to satisfy the demand for variant output formats.
Hence, make it possible to change any pset option(s) for the duration
of a single command output, by writing "option=value ..." inside
parentheses, for example
\g (format=csv csv_fieldsep='\t') somefile
\gx can now be understood as a shorthand for including expanded=on
inside the parentheses.
Patch by me, expanding on a proposal by Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRBx9OnBPRJVtfA5ycUpySge-XootAXAsv_4rrkHxJ8eRg@mail.gmail.com
%d can be used to track if the current connection is in a transaction
block or not, and adding it by default to the prompt has the advantage
to not need a modification of .psqlrc, something not possible depending
on the environment.
This discussion has happened across various sources, and there was a
strong consensus in favor of this change.
Author: Vik Fearing
Reviewed-by: Fabien Coelho
Discussion: https://postgr.es/m/09502c40-cfe1-bb29-10f9-4b3fa7b2bbb2@2ndquadrant.com
This introduces the concept of table access methods, i.e. CREATE
ACCESS METHOD ... TYPE TABLE and
CREATE TABLE ... USING (storage-engine).
No table access functionality is delegated to table AMs as of this
commit, that'll be done in following commits.
Subsequent commits will incrementally abstract table access
functionality to be routed through table access methods. That change
is too large to be reviewed & committed at once, so it'll be done
incrementally.
Docs will be updated at the end, as adding them incrementally would
likely make them less coherent, and definitely is a lot more work,
without a lot of benefit.
Table access methods are specified similar to index access methods,
i.e. pg_am.amhandler returns, as INTERNAL, a pointer to a struct with
callbacks. In contrast to index AMs that struct needs to live as long
as a backend, typically that's achieved by just returning a pointer to
a constant struct.
Psql's \d+ now displays a table's access method. That can be disabled
with HIDE_TABLEAM=true, which is mainly useful so regression tests can
be run against different AMs. It's quite possible that this behaviour
still needs to be fine tuned.
For now it's not allowed to set a table AM for a partitioned table, as
we've not resolved how partitions would inherit that. Disallowing
allows us to introduce, if we decide that's the way forward, such a
behaviour without a compatibility break.
Catversion bumped, to add the heap table AM and references to it.
Author: Haribabu Kommi, Andres Freund, Alvaro Herrera, Dimitri Golgov and others
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsqlhttps://postgr.es/m/20190107235616.6lur25ph22u5u5av@alap3.anarazel.dehttps://postgr.es/m/20190304234700.w5tmhducs5wxgzls@alap3.anarazel.de
"\pset format csv", or --csv, selects comma-separated values table format.
This is compliant with RFC 4180, except that we aren't too picky about
whether the record separator is LF or CRLF; also, the user may choose a
field separator other than comma.
This output format is directly compatible with the server's COPY CSV
format, and will also be useful as input to other programs. It's
considerably safer for that purpose than the old recommendation to
use "unaligned" format, since the latter couldn't handle data
containing the field separator character.
Daniel Vérité, reviewed by Fabien Coelho and David Fetter, some
tweaking by me
Discussion: https://postgr.es/m/a8de371e-006f-4f92-ab72-2bbe3ee78f03@manitou-mail.org
This command acts somewhat like \g, but instead of executing the query
buffer, it merely prints a description of the columns that the query
result would have. (Of course, this still requires parsing the query;
if parse analysis fails, you get an error anyway.) We accomplish this
using an unnamed prepared statement, which should be invisible to psql
users.
Pavel Stehule, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/CAFj8pRBhYVvO34FU=EKb=nAF5t3b++krKt1FneCmR0kuF5m-QA@mail.gmail.com
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
It can often be useful to use expanded mode output (\x) for just a
single query. Introduce a \gx which acts exactly like \g except that it
will force expanded output mode for that one \gx call. This is simpler
than having to use \x as a toggle and also means that the user doesn't
have to worry about the current state of the expanded variable, or
resetting it later, to ensure a given query is always returned in
expanded mode.
Primairly Christoph's patch, though I did tweak the documentation and help
text a bit, and re-indented the tab completion section.
Author: Christoph Berg
Reviewed By: Daniel Verite
Discussion: https://postgr.es/m/20170127132737.6skslelaf4txs6iw%40msg.credativ.de
Modify FETCH_COUNT to always have a defined value, like other control
variables, mainly so it will always appear in "\set" output.
Add hooks to force HISTSIZE to be defined and require it to have an
integer value. (I don't see any point in allowing it to be set to
non-integral values.)
Add hooks to force IGNOREEOF to be defined and require it to have an
integer value. Unlike the other cases, here we're trying to be
bug-compatible with a rather bogus externally-defined behavior, so I think
we need to continue to allow "\set IGNOREEOF whatever". Fix it so that
the substitution hook silently replace non-numeric values with "10",
so that the stored value always reflects what we're really doing.
Add a dummy assign hook for HISTFILE, just so it's always in
variables.c's list. We can't require it to be defined always, because
that would break the interaction with the PSQL_HISTORY environment
variable, so there isn't any change in visible behavior here.
Remove tab-complete.c's private list of known variable names, since that's
really a maintenance nuisance. Given the preceding changes, there are no
control variables it won't show anyway. This does mean that if for some
reason you've unset one of the status variables (DBNAME, HOST, etc), that
variable would not appear in tab completion for \set. But I think that's
fine, for at least two reasons: we shouldn't be encouraging people to use
those variables as regular variables, and if someone does do so anyway,
why shouldn't it act just like a regular variable?
Remove ugly and no-longer-used-anywhere GetVariableNum(). In general,
future additions of integer-valued control variables should follow the
paradigm of adding an assign hook using ParseVariableNum(), so there's
no reason to expect we'd need this again later.
Discussion: https://postgr.es/m/17516.1485973973@sss.pgh.pa.us
\crosstabview interpreted its arguments in an unusual way, including
doing case-insensitive matching of unquoted column names, which is
surely not the right thing. Rip that out in favor of doing something
equivalent to the dequoting/case-folding rules used by other psql
commands. To keep it simple, change the syntax so that the optional
sort column is specified as a separate argument, instead of the
also-quite-unusual syntax that attached it to the colH argument with
a colon.
Also, rework the error messages to be closer to project style.
\crosstabview is a completely different way to display results from a
query: instead of a vertical display of rows, the data values are placed
in a grid where the column and row headers come from the data itself,
similar to a spreadsheet.
The sort order of the horizontal header can be specified by using
another column in the query, and the vertical header determines its
ordering from the order in which they appear in the query.
This only allows displaying a single value in each cell. If more than
one value correspond to the same cell, an error is thrown. Merging of
values can be done in the query itself, if necessary. This may be
revisited in the future.
Author: Daniel Verité
Reviewed-by: Pavel Stehule, Dean Rasheed
\gexec executes the just-entered query, like \g, but instead of printing
the results it takes each field as a SQL command to send to the server.
Computing a series of queries to be executed is a fairly common thing,
but up to now you always had to resort to kluges like writing the queries
to a file and then inputting the file. Now it can be done with no
intermediate step.
The implementation is fairly straightforward except for its interaction
with FETCH_COUNT. ExecQueryUsingCursor isn't capable of being called
recursively, and even if it were, its need to create a transaction
block interferes unpleasantly with the desired behavior of \gexec after
a failure of a generated query (i.e., that it can continue). Therefore,
disable use of ExecQueryUsingCursor when doing the master \gexec query.
We can still apply it to individual generated queries, however, and there
might be some value in doing so.
While testing this feature's interaction with single-step mode, I (tgl) was
led to conclude that SendQuery needs to recognize SIGINT (cancel_pressed)
as a negative response to the single-step prompt. Perhaps that's a
back-patchable bug fix, but for now I just included it here.
Corey Huinker, reviewed by Jim Nasby, Daniel Vérité, and myself
Often, upon getting an unexpected error in psql, one's first wish is that
the verbosity setting had been higher; for example, to be able to see the
schema-name field or the server code location info. Up to now the only way
has been to adjust the VERBOSITY variable and repeat the failing query.
That's a pain, and it doesn't work if the error isn't reproducible.
This commit adds a psql feature that redisplays the most recent server
error at full verbosity, without needing to make any variable changes or
re-execute the failed command. We just need to hang onto the latest error
PGresult in case the user executes \errverbose, and then apply libpq's
new PQresultVerboseErrorMessage() function to it. This will consume
some trivial amount of psql memory, but otherwise the cost when the
feature isn't used should be negligible.
Alex Shulgin, reviewed by Daniel Vérité, some improvements by me
Remove the code in plpgsql that suppressed the innermost line of CONTEXT
for messages emitted by RAISE commands. That was never more than a quick
backwards-compatibility hack, and it's pretty silly in cases where the
RAISE is nested in several levels of function. What's more, it violated
our design theory that verbosity of error reports should be controlled
on the client side not the server side.
To alleviate the resulting noise increase, introduce a feature in libpq
and psql whereby the CONTEXT field of messages can be suppressed, either
always or only for non-error messages. Printing CONTEXT for errors only
is now their default behavior.
The actual code changes here are pretty small, but the effects on the
regression test outputs are widespread. I had to edit some of the
alternative expected outputs by hand; hopefully the buildfarm will soon
find anything I fat-fingered.
In passing, fix up (again) the output line counts in psql's various
help displays. Add some commentary about how to verify them.
Pavel Stehule, reviewed by Petr Jelínek, Jeevan Chalke, and others
For simple boolean variables such as ON_ERROR_STOP, psql has for a long
time recognized variant spellings of "on" and "off" (such as "1"/"0"),
and it also made a point of warning you if you'd misspelled the setting.
But these conveniences did not exist for other keyword-valued variables.
In particular, though ECHO_HIDDEN and ON_ERROR_ROLLBACK include "on" and
"off" as possible values, none of the alternative spellings for those were
recognized; and to make matters worse the code would just silently assume
"on" was meant for any unrecognized spelling. Several people have reported
getting bitten by this, so let's fix it. In detail, this patch:
* Allows all spellings recognized by ParseVariableBool() for ECHO_HIDDEN
and ON_ERROR_ROLLBACK.
* Reports a warning for unrecognized values for COMP_KEYWORD_CASE, ECHO,
ECHO_HIDDEN, HISTCONTROL, ON_ERROR_ROLLBACK, and VERBOSITY.
* Recognizes all values for all these variables case-insensitively;
previously there was a mishmash of case-sensitive and case-insensitive
behaviors.
Back-patch to all supported branches. There is a small risk of breaking
existing scripts that were accidentally failing to malfunction; but the
consensus is that the chance of detecting real problems and preventing
future mistakes outweighs this.
The new %l substitution shows the line number inside a (potentially
multi-line) statement starting from one.
Author: Sawada Masahiko, heavily editorialized by me.
Reviewed-By: Jeevan Chalke, Alvaro Herrera
When the psql variable ECHO is set to 'erros', only failed SQL commands
are printed to standard error output. Also this patch adds -b option into psql.
This is equivalent to setting the variable ECHO to 'errors'.
Pavel Stehule, reviewed by Fabrízio de Royes Mello, Samrat Revagade,
Kumar Rajeev Rastogi, Abhijit Menon-Sen, and me.
Commit 08146775ac changed do_copy() to
temporarily scribble on pset.cur_cmd_source. That was a mighty ugly bit of
code in any case, but in particular it broke handleCopyIn's ability to tell
whether it was reading from the current script source file (in which case
pset.lineno should be incremented for each line of COPY data), or from
someplace else (in which case it shouldn't). The former case still worked,
the latter not so much. The visible effect was that line numbers reported
for errors in a script file would be wrong if there were an earlier \copy
that was reading anything other than inline-in-the-script-file data.
To fix, introduce another pset field that holds the file do_copy wants the
COPY code to use. This is a little bit ugly, but less so than passing the
file down explicitly through several layers that aren't COPY-specific.
Extracted from a larger patch by Kumar Rajeev Rastogi; that patch also
changes printing of COPY command tags, which is not a bug fix and shouldn't
get back-patched. This particular idea was from a suggestion by Amit
Khandekar, if I'm reading the thread correctly.
Back-patch to 9.2 where the faulty code was introduced.
The previous commit was intended to make psql show the full path name when
doing a \s (history save), but it was very badly implemented and would show
confusing if not outright wrong information in many situations; for
instance if the path name given to \s is absolute, or if \cd commands
involving relative paths have been issued. Consensus seems to be that
we don't especially need this functionality in \s, and certainly not in \s
alone. So revert rather than trying to fix it up. Per gripe from
Ian Barwick.
Although the bogus behavior exists in all supported versions, I'm not
back-patching, because the work created for translators (by change of
a translatable message) would probably outweigh the value of what is
after all a mostly-cosmetic change.
Also change "switch" to "arg" because "switch" is a bit of a sloppy
term. So the environment variable is called
PSQL_EDITOR_LINENUMBER_ARG. Set "+" as hardcoded default value on
Unix (since "vi" is the hardcoded default editor), so many users won't
have to configure this at all. Move the documentation around a bit to
centralize the editor configuration under environment variables,
rather than repeating bits of it under every backslash command that
invokes an editor.
\ir is short for "include relative"; when used from a script, the
supplied pathname will be interpreted relative to the input file,
rather than to the current working directory.
Gurjeet Singh, reviewed by Josh Kupershmidt, with substantial further
cleanup by me.
Tom Lane
Bruce Momjian
Peter Eisentraut
Robert Haas
Michael Paquier
Amit Kapila
Andres Freund
Stephen Frost
Alvaro Herrera
Fujii Masao
Peter Eisentraut
Magnus Hagander