When specified directly as DML queries, INSERT was not getting always
completed to "INSERT INTO", same for DELETE with "DELETE FROM". This
makes the completion behavior more consistent for both commands, saving
a few keystrokes.
Commands on policies, triggers, grant/revoke, etc. require only DELETE
as completion keyword.
Author: Haiying Tang
Reviewed-by: Dilip Kumar, Julien Rouhaud
Discussion: https://postgr.es/m/OS0PR01MB61135AE2B07CCD1AB8C6A0F6FB549@OS0PR01MB6113.jpnprd01.prod.outlook.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Some relations with LZ4 used as the toast compression methods have been
left around in the main regression test suite to stress pg_upgrade, but
pg_dump, that includes tests much more picky in terms of output
generated, had no actual coverage with this feature.
Similarly to collations, tests only working with LZ4 are tracked with an
additional flag, and this uses TestLib::check_pg_config() to check if
the build supports LZ4 or not. This stresses more scenarios with
tables, materialized views and pg_dump --no-toast-compression.
Author: Dilip Kumar
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFiTN-twgPmohG7qj1HXhySq16h123y5OowsQR+5h1YeZE9fmQ@mail.gmail.com
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
Don't advocate dropping a whole table when dropping a column would
serve. While at it, try to make the layout of these messages a
bit cleaner and more consistent.
Per suggestion from Daniel Gustafsson. No back-patch, as we generally
don't like to churn translatable messages in released branches.
Discussion: https://postgr.es/m/2798740.1619622555@sss.pgh.pa.us
Commits 29aeda6e4 et al closed up some oversights involving not checking
for non-upgradable types within container types, such as arrays and
ranges. However, I only looked at version.c, failing to notice that
there were substantially-equivalent tests in check.c. (The division
of responsibility between those files is less than clear...)
In addition, because genbki.pl does not guarantee that auto-generated
rowtype OIDs will hold still across versions, we need to consider that
the composite type associated with a system catalog or view is
non-upgradable. It seems unlikely that someone would have a user
column declared that way, but if they did, trying to read it in another
PG version would likely draw "no such pg_type OID" failures, thanks
to the type OID embedded in composite Datums.
To support the composite and reg*-type cases, extend the recursive
query that does the search to allow any base query that returns
a column of pg_type OIDs, rather than limiting it to exactly one
starting type.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/2798740.1619622555@sss.pgh.pa.us
The verification of permissions doesn't succeed on Cygwin, because the
required feature is not implemented for Cygwin at the moment. So skip
this part of the test, like MinGW already does.
This will install amcheck in the database if not present. The default
schema is for the extension is pg_catalog, but this can be overridden by
providing a value for the option.
Mark Dilger, slightly editorialized by me.
(rather divergent)
Discussion: https://postgr.es/m/bdc0f7c2-09e3-ee57-8471-569dfb509234@dunslane.net
Instead, put them in via a format placeholder. This reduces the
number of distinct translatable messages and also reduces the chances
of typos during translation. We already did this for the system call
arguments in a number of cases, so this is just the same thing taken a
bit further.
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
A couple of tests have been using 0 as magic constant while SEEK_SET can
be used instead. This makes the code easier to understand, and more
consistent with the changes done in 3c5b068.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YHrc24AgJQ6tQ1q0@paquier.xyz
Invent system_functions.sql to carry the function definitions that
were formerly in system_views.sql. The function definitions were
already a quarter of the file and are about to be more, so it seems
appropriate to give them their own home.
In passing, fix an oversight in dfb75e478: it neglected to call
check_input() for system_constraints.sql.
Discussion: https://postgr.es/m/3956760.1618529139@sss.pgh.pa.us
Commit e717a9a18 changed the longstanding rule that prosrc is NOT NULL
because when a SQL-language function is written in SQL-standard style,
we don't currently have anything useful to put there. This seems a poor
decision though, as it could easily have negative impacts on external
PLs (opening them to crashes they didn't use to have, for instance).
SQL-function-related code can just as easily test "is prosqlbody not
null" as "is prosrc null", so there's no real gain there either.
Hence, revert the NOT NULL marking removal and adjust related logic.
For now, we just put an empty string into prosrc for SQL-standard
functions. Maybe we'll have a better idea later, although the
history of things like pg_attrdef.adsrc suggests that it's not
easy to maintain a string equivalent of a node tree.
This also adds an assertion that queryDesc->sourceText != NULL
to standard_ExecutorStart. We'd been silently relying on that
for awhile, so let's make it less silent.
Also fix some overlooked documentation and test cases.
Discussion: https://postgr.es/m/2197698.1617984583@sss.pgh.pa.us
6568cef, that introduced the option, had an inconsistent behavior when
it comes to configuration tables set up by pg_extension_config_dump, as
the data of all configuration tables would included in a dump even for
extensions not listed by a set of --extension switches.
The contents dumped changed depending on the schema where an extension
was installed when an extension was not listed. For example, an
extension installed under the public schema would have its configuration
data not dumped even when not listed with --extension, which was
inconsistent with the case of an extension installed on a non-public
schema, where the configuration would be dumped.
Per discussion with Noah, we have settled down to the simple rule of
dumping configuration data of an extension if it is listed in
--extension (default is unchanged and backward-compatible, to dump
everything on sight if there are no extensions directly listed). This
avoids some weird cases where the dumps depended on a --schema for one.
More tests are added to cover the gap, where we cross-check more
behaviors depending on --schema when an extension is not listed.
Reported-by: Noah Misch
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/20210404220802.GA728316@rfd.leadboat.com
We don't need to mention the attribute number in these messages, because
there's a dedicated column for that, but we should mention the toast
value ID, because that's really useful for any follow-up troubleshooting
the user wants to do. This also rewords some of the messages to hopefully
read a little better.
Also, use VARATT_EXTERNAL_GET_POINTER in case we're accessing a TOAST
pointer that isn't aligned on a platform that's fussy about alignment,
so that we don't crash while corruption-checking the user's data.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/7D3B9BF6-50D0-4C30-8506-1C1851C7F96F@enterprisedb.com
Commit 8ff1c94649 extended TRUNCATE command so that it can also truncate
foreign tables. But it forgot to support tab-complete for TRUNCATE on
foreign tables. That is, previously tab-complete for TRUNCATE displayed
only the names of regular tables.
This commit improves tab-complete for TRUNCATE so that it displays also
the names of foreign tables.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
Teach xlogreader.c to decode its output into a circular buffer, to
support optimizations based on looking ahead.
* XLogReadRecord() works as before, consuming records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros.
* An alternative new interface XLogNextRecord() is added that returns
pointers to DecodedXLogRecord structs that can be examined directly.
* XLogReadAhead() provides a second cursor that lets you see
further ahead, as long as data is available and there is enough space
in the decoding buffer. This returns DecodedXLogRecord pointers to the
caller, but also adds them to a queue of records that will later be
consumed by XLogNextRecord()/XLogReadRecord().
The buffer's size is controlled with wal_decode_buffer_size. The buffer
could potentially be placed into shared memory, for future projects.
Large records that don't fit in the circular buffer are called
"oversized" and allocated separately with palloc().
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
When dealing with overloaded function or operator names, having
to look through a long list of matches is tedious. Let's extend
these commands to allow specification of (input) argument types
to let such results be trimmed down. Each additional argument
is treated the same as the pattern argument of \dT and matched
against the appropriate argument's type name.
While at it, fix \dT (and these new options) to recognize the
usual notation of "foo[]" for "the array type over foo", and
to handle the special abbreviations allowed by the backend
grammar, such as "int" for "integer".
Greg Sabino Mullane, revised rather significantly by me
Discussion: https://postgr.es/m/CAKAnmmLF9Hhu02N+s7uAyLc5J1xZReg72HQUoiKhNiJV3_jACQ@mail.gmail.com
This adds support for writing CREATE FUNCTION and CREATE PROCEDURE
statements for language SQL with a function body that conforms to the
SQL standard and is portable to other implementations.
Instead of the PostgreSQL-specific AS $$ string literal $$ syntax,
this allows writing out the SQL statements making up the body
unquoted, either as a single statement:
CREATE FUNCTION add(a integer, b integer) RETURNS integer
LANGUAGE SQL
RETURN a + b;
or as a block
CREATE PROCEDURE insert_data(a integer, b integer)
LANGUAGE SQL
BEGIN ATOMIC
INSERT INTO tbl VALUES (a);
INSERT INTO tbl VALUES (b);
END;
The function body is parsed at function definition time and stored as
expression nodes in a new pg_proc column prosqlbody. So at run time,
no further parsing is required.
However, this form does not support polymorphic arguments, because
there is no more parse analysis done at call time.
Dependencies between the function and the objects it uses are fully
tracked.
A new RETURN statement is introduced. This can only be used inside
function bodies. Internally, it is treated much like a SELECT
statement.
psql needs some new intelligence to keep track of function body
boundaries so that it doesn't send off statements when it sees
semicolons that are inside a function body.
Tested-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
Documentation and comments in code and tests have been using the terms
sensitive/insensitive cursor incorrectly relative to the SQL standard.
(Cursor sensitivity is only relevant for changes made in the same
transaction as the cursor, not for concurrent changes in other
sessions.) Moreover, some of the behavior of PostgreSQL is incorrect
according to the SQL standard, confusing the issue further. (WHERE
CURRENT OF changes are not visible in insensitive cursors, but they
should be.)
This change corrects the terminology and removes the claim that
sensitive cursors are supported. It also adds a test case that checks
the insensitive behavior in a "correct" way, using a change command
not using WHERE CURRENT OF. Finally, it adds the ASENSITIVE cursor
option to select the default asensitive behavior, per SQL standard.
There are no changes to cursor behavior in this patch.
Discussion: https://www.postgresql.org/message-id/flat/96ee8b30-9889-9e1b-b053-90e10c050e85%40enterprisedb.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
This adds a new function, permute(), that generates pseudorandom
permutations of arbitrary sizes. This can be used to randomly shuffle
a set of values to remove unwanted correlations. For example,
permuting the output from a non-uniform random distribution so that
all the most common values aren't collocated, allowing more realistic
tests to be performed.
Formerly, hash() was recommended for this purpose, but that suffers
from collisions that might alter the distribution, so recommend
permute() for this purpose instead.
Fabien Coelho and Hironobu Suzuki, with additional hacking be me.
Reviewed by Thomas Munro, Alvaro Herrera and Muhammad Usama.
Discussion: https://postgr.es/m/alpine.DEB.2.21.1807280944370.5142@lancre
At present, if we want to update publications in a subscription, we
can use SET PUBLICATION. However, it requires supplying all
publications that exists and the new publications. If we want to add
new publications, it's inconvenient. The new syntax only supplies the
new publications. When the refresh is true, it only refreshes the new
publications.
Author: Japin Li <japinli@hotmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/MEYP282MB166939D0D6C480B7FBE7EFFBB6BC0@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
When editing the previous query buffer, if the editor is exited
without modifying the temp file then clear the query buffer,
rather than re-loading (and probably re-executing) the previous
query buffer. This reduces the probability of accidentally
re-executing something you didn't intend to.
Similarly, in "\e file", if the file isn't actually modified
then don't load it into the query buffer. And in "\ef" and
"\ev", if no changes are made then clear the query buffer
instead of loading the function or view definition into it.
Cases where we fail to invoke the editor at all, or it returns
a nonzero status, are treated like the no-file-modification case.
Laurenz Albe, reviewed by Jacob Champion
Discussion: https://postgr.es/m/0ba3f2a658bac6546d9934ab6ba63a805d46a49b.camel@cybertec.at
pg_checksums uses two counters, total size and current size,
to calculate the progress. Previously the progress that
pg_checksums reported could not reach 100% at the end.
The cause of this issue was that the sizes of only pages excluding
new ones in each file were counted as the current size
while the size of each file is counted as the total size.
That is, the total size of all new pages could be reported
as the difference between the total size and current size.
This commit fixes this issue by making pg_checksums count
the sizes of all pages including new ones in each file as
the current size.
Back-patch to v12 where progress reporting was added to pg_checksums.
Reported-by: Shinya Kato
Author: Shinya Kato
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/TYAPR01MB289656B1ACA0A5E7CAD07BE3C47A9@TYAPR01MB2896.jpnprd01.prod.outlook.com
Despite the clear comments pointing out that the duplicative code
segments in ReadHead() and _discoverArchiveFormat() needed to be
in sync, they were not: the latter did not bother to apply any of
the sanity checks in the former. We'd missed noticing this partly
because none of those checks would fail in scenarios we customarily
test, and partly because the oversight would be masked if both
segments execute, which they would in cases other than needing to
autodetect the format of a non-seekable stdin source. However,
in a case meeting all these requirements --- for example, trying
to read a newer-than-supported archive format from non-seekable
stdin --- pg_restore missed applying the version check and would
likely dump core or otherwise misbehave.
The whole thing is silly anyway, because there seems little reason
to duplicate the logic beyond the one-line verification that the
file starts with "PGDMP". There seems to have been an undocumented
assumption that multiple major formats (major enough to require
separate reader modules) would nonetheless share the first half-dozen
fields of the custom-format header. This seems unlikely, so let's
fix it by just nuking the duplicate logic in _discoverArchiveFormat().
Also get rid of the pointless attempt to seek back to the start of
the file after successful autodetection. That wastes cycles and
it means we have four behaviors to verify not two.
Per bug #16951 from Sergey Koposov. This has been broken for
decades, so back-patch to all supported versions.
Discussion: https://postgr.es/m/16951-a4dd68cf0de23048@postgresql.org
With the 'noError' argument, you can try to convert a buffer without
knowing the character boundaries beforehand. The functions now need to
return the number of input bytes successfully converted.
This is is a backwards-incompatible change, if you have created a custom
encoding conversion with CREATE CONVERSION. This adds a check to
pg_upgrade for that, refusing the upgrade if there are any user-defined
encoding conversions. Custom conversions are very rare, there are no
commonly used extensions that I know of that uses that feature. No other
objects can depend on conversions, so if you do have one, you can fairly
easily drop it before upgrading, and recreate it after the upgrade with
an updated version.
Add regression tests for built-in encoding conversions. This doesn't cover
every conversion, but it covers all the internal functions in conv.c that
are used to implement the conversions.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/e7861509-3960-538a-9025-b75a61188e01%40iki.fi
When specified, only extensions matching the given pattern are included
in dumps. Similarly to --table and --schema, when --strict-names is
used, a perfect match is required. Also, like the two other options,
this new option offers no guarantee that dependent objects have been
dumped, so a restore may fail on a clean database.
Tests are added in test_pg_dump/, checking after a set of positive and
negative cases, with or without an extension's contents added to the
dump generated.
Author: Guillaume Lelarge
Reviewed-by: David Fetter, Tom Lane, Michael Paquier, Asif Rehman,
Julien Rouhaud
Discussion: https://postgr.es/m/CAECtzeXOt4cnMU5+XMZzxBPJ_wu76pNy6HZKPRBL-j7yj1E4+g@mail.gmail.com
As committed in bbe0a81db, pg_dump from a pre-v14 server effectively
acts as though you'd said --no-toast-compression. I think the right
thing is for it to act as though default_toast_compression is set to
"pglz", instead, so that the tables' toast compression behavior is
preserved. You can always get the other behavior, if you want that,
by giving the switch.
Discussion: https://postgr.es/m/1112852.1616609702@sss.pgh.pa.us
Allow defining extended statistics on expressions, not just just on
simple column references. With this commit, expressions are supported
by all existing extended statistics kinds, improving the same types of
estimates. A simple example may look like this:
CREATE TABLE t (a int);
CREATE STATISTICS s ON mod(a,10), mod(a,20) FROM t;
ANALYZE t;
The collected statistics are useful e.g. to estimate queries with those
expressions in WHERE or GROUP BY clauses:
SELECT * FROM t WHERE mod(a,10) = 0 AND mod(a,20) = 0;
SELECT 1 FROM t GROUP BY mod(a,10), mod(a,20);
This introduces new internal statistics kind 'e' (expressions) which is
built automatically when the statistics object definition includes any
expressions. This represents single-expression statistics, as if there
was an expression index (but without the index maintenance overhead).
The statistics is stored in pg_statistics_ext_data as an array of
composite types, which is possible thanks to 79f6a942bd.
CREATE STATISTICS allows building statistics on a single expression, in
which case in which case it's not possible to specify statistics kinds.
A new system view pg_stats_ext_exprs can be used to display expression
statistics, similarly to pg_stats and pg_stats_ext views.
ALTER TABLE ... ALTER COLUMN ... TYPE now treats indexes the same way it
treats indexes, i.e. it drops and recreates the statistics. This means
all statistics are reset, and we no longer try to preserve at least the
functional dependencies. This should not be a major issue in practice,
as the functional dependencies actually rely on per-column statistics,
which were always reset anyway.
Author: Tomas Vondra
Reviewed-by: Justin Pryzby, Dean Rasheed, Zhihong Yu
Discussion: https://postgr.es/m/ad7891d2-e90c-b446-9fe2-7419143847d7%40enterprisedb.com
Membership consists, implicitly, of the current database owner. Expect
use in template databases. Once pg_database_owner has rights within a
template, each owner of a database instantiated from that template will
exercise those rights.
Reviewed by John Naylor.
Discussion: https://postgr.es/m/20201228043148.GA1053024@rfd.leadboat.com
Allow a partition be detached from its partitioned table without
blocking concurrent queries, by running in two transactions and only
requiring ShareUpdateExclusive in the partitioned table.
Because it runs in two transactions, it cannot be used in a transaction
block. This is the main reason to use dedicated syntax: so that users
can choose to use the original mode if they need it. But also, it
doesn't work when a default partition exists (because an exclusive lock
would still need to be obtained on it, in order to change its partition
constraint.)
In case the second transaction is cancelled or a crash occurs, there's
ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final
steps.
The main trick to make this work is the addition of column
pg_inherits.inhdetachpending, initially false; can only be set true in
the first part of this command. Once that is committed, concurrent
transactions that use a PartitionDirectory will include or ignore
partitions so marked: in optimizer they are ignored if the row is marked
committed for the snapshot; in executor they are always included. As a
result, and because of the way PartitionDirectory caches partition
descriptors, queries that were planned before the detach will see the
rows in the detached partition and queries that are planned after the
detach, won't.
A CHECK constraint is created that duplicates the partition constraint.
This is probably not strictly necessary, and some users will prefer to
remove it afterwards, but if the partition is re-attached to a
partitioned table, the constraint needn't be rechecked.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
To allow inserts in parallel-mode this feature has to ensure that all the
constraints, triggers, etc. are parallel-safe for the partition hierarchy
which is costly and we need to find a better way to do that. Additionally,
we could have used existing cached information in some cases like indexes,
domains, etc. to determine the parallel-safety.
List of commits reverted, in reverse chronological order:
ed62d3737c Doc: Update description for parallel insert reloption.
c8f78b6161 Add a new GUC and a reloption to enable inserts in parallel-mode.
c5be48f092 Improve FK trigger parallel-safety check added by 05c8482f7f.
e2cda3c20a Fix use of relcache TriggerDesc field introduced by commit 05c8482f7f.
e4e87a32cc Fix valgrind issue in commit 05c8482f7f.
05c8482f7f Enable parallel SELECT for "INSERT INTO ... SELECT ...".
Discussion: https://postgr.es/m/E1lMiB9-0001c3-SY@gemulon.postgresql.org
Disable autovacuum, because we don't want it to run against
intentionally corrupted tables. Also, before corrupting the tables,
run pg_amcheck and ensure that it passes. Otherwise, if something
unexpected happens when we check the corrupted tables, it's not so
clear whether it would have also happened before we corrupted
them.
Mark Dilger
Discussion: http://postgr.es/m/AA5506CE-7D2A-42E4-A51D-358635E3722D@enterprisedb.com
Jasen Betts reported yet another unintended side effect of commit
85c54287a: reconnecting with "\c service=whatever" did not have the
expected results. The reason is that starting from the output of
PQconndefaults() effectively allows environment variables (such
as PGPORT) to override entries in the service file, whereas the
normal priority is the other way around.
Not using PQconndefaults at all would require yet a third main code
path in do_connect's parameter setup, so I don't really want to fix
it that way. But we can have the logic effectively ignore all the
default values for just a couple more lines of code.
This patch doesn't change the behavior for "\c -reuse-previous=on
service=whatever". That remains significantly different from before
85c54287a, because many more parameters will be re-used, and thus
not be possible for service entries to replace. But I think this
is (mostly?) intentional. In any case, since libpq does not report
where it got parameter values from, it's hard to do differently.
Per bug #16936 from Jasen Betts. As with the previous patches,
back-patch to all supported branches. (9.5 is unfortunately now
out of support, so this won't get fixed there.)
Discussion: https://postgr.es/m/16936-3f524322a53a29f0@postgresql.org
pg_waldump --stats=record identifies a record by a combination
of the RmgrId and the four bits of the xl_info field of the record.
But XACT records use the first bit of those four bits for an optional
flag variable, and the following three bits for the opcode to
identify a record. So previously the same type of XACT record
could have different four bits (three bits are the same but the
first one bit is different), and which could cause
pg_waldump --stats=record to show two lines of per-record statistics
for the same XACT record. This is a bug.
This commit changes pg_waldump --stats=record so that it processes
only XACT record differently, i.e., filters the opcode out of xl_info
and uses a combination of the RmgrId and those three bits as
the identifier of a record, only for XACT record. For other records,
the four bits of the xl_info field are still used.
Back-patch to all supported branches.
Author: Kyotaro Horiguchi
Reviewed-by: Shinya Kato, Fujii Masao
Discussion: https://postgr.es/m/2020100913412132258847@highgo.ca
This commit improves pgbench \sleep command so that it handles
the following three cases more properly.
(1) When only one argument was specified in \sleep command and
it's not a number, previously pgbench reported a confusing error
message like "unrecognized time unit, must be us, ms or s".
This commit fixes this so that more proper error message like
"invalid sleep time, must be an integer" is reported.
(2) When two arguments were specified in \sleep command and
the first argument was not a number, previously pgbench treated
that argument as the sleep time 0. No error was reported in this
case. This commit fixes this so that an error is thrown in this
case.
(3) When a variable was specified as the first argument in \sleep
command and the variable stored non-digit value, previously
pgbench treated that argument as the sleep time 0. No error
was reported in this case. This commit fixes this so that
an error is thrown in this case.
Author: Kota Miyake
Reviewed-by: Hayato Kuroda, Alvaro Herrera, Fujii Masao
Discussion: https://postgr.es/m/23b254daf20cec4332a2d9168505dbc9@oss.nttdata.com
The approach used in commit bbe0a81db would've been disastrous for
portability of dumps. Instead handle non-default compression options
in separate ALTER TABLE commands. This reduces chatter for the
common case where most columns are compressed the same way, and it
makes it possible to restore the dump to a server that lacks any
knowledge of per-attribute compression options (so long as you're
willing to ignore syntax errors from the ALTER TABLE commands).
There's a whole lot left to do to mop up after bbe0a81db, but
I'm fast-tracking this part because we need to see if it's
enough to make the buildfarm's cross-version-upgrade tests happy.
Justin Pryzby and Tom Lane
Discussion: https://postgr.es/m/20210119190720.GL8560@telsasoft.com
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Buildfarm member fairywren doesn't like the test case I added
in commit 081876d75. I'm guessing the reason is that I shouldn't
be using a perl2host-ified path in the tar command line.
Only "IMPORT" was showing as result of the completion, while IMPORT
FOREIGN SCHEMA is the only command using this keyword in first
position. This changes the completion to show the full command name
instead of just "IMPORT".
Reviewed-by: Georgios Kokolatos, Julien Rouhaud
Discussion: https://postgr.es/m/YFL6JneBiuMWYyoh@paquier.xyz
Commit 05c8482f7f added the implementation of parallel SELECT for
"INSERT INTO ... SELECT ..." which may incur non-negligible overhead in
the additional parallel-safety checks that it performs, even when, in the
end, those checks determine that parallelism can't be used. This is
normally only ever a problem in the case of when the target table has a
large number of partitions.
A new GUC option "enable_parallel_insert" is added, to allow insert in
parallel-mode. The default is on.
In addition to the GUC option, the user may want a mechanism to allow
inserts in parallel-mode with finer granularity at table level. The new
table option "parallel_insert_enabled" allows this. The default is true.
Author: "Hou, Zhijie"
Reviewed-by: Greg Nancarrow, Amit Langote, Takayuki Tsunakawa, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1K-cW7svLC2D7DHoGHxdAdg3P37BLgebqBOC2ZLc9a6QQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
The existing test script does run pg_basebackup with the -Ft option,
but it makes no real attempt to verify the sanity of the results.
We wouldn't know if the output is incompatible with standard "tar"
programs, nor if the server fails to start from the restored output.
Notably, this means that xlog.c's read_tablespace_map() is not being
meaningfully tested, since that code is used only in the tar-format
case. (We do have reasonable coverage of restoring from plain-format
output, though it's over in src/test/recovery not here.)
Hence, attempt to untar the output and start a server from it,
rather just hoping it's OK.
This test assumes that the local "tar" has the "-C directory"
switch. Although that's not promised by POSIX, my research
suggests that all non-extinct tar implementations have it.
Should the buildfarm's opinion differ, we can complicate the
test a bit to avoid requiring that.
Possibly this should be back-patched, but I'm unsure about
whether it could work on Windows before d66b23b03.
Don't complain about the last TOAST chunk number being different
from what we expected if there are no TOAST chunks at all.
In such a case, saying that the final chunk number is 0 is not
really accurate, and the fact the value is missing from the
TOAST table is reported separately anyway.
Mark Dilger
Discussion: http://postgr.es/m/AA5506CE-7D2A-42E4-A51D-358635E3722D@enterprisedb.com
Since commit ba79cb5dc, values of bind parameters have been logged
during errors in extended query mode. However, we only did that after
we'd collected and converted all the parameter values, thus failing to
offer any useful localization of invalid-parameter problems. Add a
separate callback that's used during parameter collection, and have it
print the parameter number, along with the input string if text input
format is used.
Justin Pryzby and Tom Lane
Discussion: https://postgr.es/m/20210104170939.GH9712@telsasoft.com
Discussion: https://postgr.es/m/CANfkH5k-6nNt-4cSv1vPB80nq2BZCzhFVR5O4VznYbsX0wZmow@mail.gmail.com
Pipeline mode in libpq lets an application avoid the Sync messages in
the FE/BE protocol that are implicit in the old libpq API after each
query. The application can then insert Sync at its leisure with a new
libpq function PQpipelineSync. This can lead to substantial reductions
in query latency.
Co-authored-by: Craig Ringer <craig.ringer@enterprisedb.com>
Co-authored-by: Matthieu Garrigues <matthieu.garrigues@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aya Iwata <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Vérité <daniel@manitou-mail.org>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kirk Jamison <k.jamison@fujitsu.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Nikhil Sontakke <nikhils@2ndquadrant.com>
Reviewed-by: Vaishnavi Prabakaran <VaishnaviP@fast.au.fujitsu.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CAMsr+YFUjJytRyV4J-16bEoiZyH=4nj+sQ7JP9ajwz=B4dMMZw@mail.gmail.com
Discussion: https://postgr.es/m/CAJkzx4T5E-2cQe3dtv2R78dYFvz+in8PY7A8MArvLhs_pg75gg@mail.gmail.com
It's not immediately obvious what you have to do to get "make
installcheck" to work here, so document that along the same lines
as we've used elsewhere.
It does not work on all versions of perl across all platforms.
To avoid endian-ness issues, pick a new value for column a
that has the same upper 4 bytes as lower 4 bytes. Try to
make it something that isn't likely to occur anywhere nearby
in the page.
Discussion: http://postgr.es/m/29DA079B-0658-4E66-BDAA-0EFD7B64D9C6@enterprisedb.com
Commit 24189277f6 managed to remove
one of the two places where we were checking for a "no such user"
error while leaving the other one right next to it. So remove that
too. In fact, remove the entire test, because the whole point of
this test was to see which message we got on a failure.
It's hard to believe, but buildfarm results from the new pg_amcheck
suggest that command_checks_all() perform shell expansion on some
machines but not others, apparently due to an underlying behavior
difference in IPC::Run. Let's see if we can work around that - and
confirm that it is the real problem - by passing '-S*' as a single
argument rather than '-S' and '*' as two separate ones.
Failures were observed on jacana and hoverfly.
Mark Dilger
Discussion: http://postgr.es/m/9E76E46A-48B2-4869-BD0C-422204C1F767@enterprisedb.com
Test #12 overwrote a 1-byte varlena header to make it look like the
initial byte of a 4-byte varlena header, but the results were
endian-dependent. Also, the byte "abc" that followed the overwritten
byte would be interpreted differently depending on endian-ness.
Overwrite 4 bytes instead, in an endian-aware manner.
Test #13 accidentally managed to depend on TOAST_MAX_CHUNK_SIZE,
which varies slightly depending on MAXIMUM_ALIGNOF. That's not
the point anyway, so make the regexp insensitive to the expected
number of chunks.
Mark Dilger
Discussion: http://postgr.es/m/A80D68F6-E38F-482D-9522-E2FB6AAFE8A1@enterprisedb.com
psql's editing commands decide whether the user has edited the file
by checking for change of modification timestamp. This is probably
fine for a pre-existing file, but with a temporary file that is
created within the command, it's possible for a fast typist to
save-and-exit in less than the one-second granularity of stat(2)
timestamps. On Windows FAT filesystems the granularity is even
worse, 2 seconds, making the race a bit easier to hit.
To fix, try to set the temp file's mod time to be two seconds ago.
It's unlikely this would fail, but then again the race condition
itself is unlikely, so just ignore any error.
Also, we might as well check the file size as well as its mod time.
While this is a difficult bug to hit, it still seems worth
back-patching, to ensure that users' edits aren't lost.
Laurenz Albe, per gripe from Jacob Champion; based on fix suggestions
from Jacob and myself
Discussion: https://postgr.es/m/0ba3f2a658bac6546d9934ab6ba63a805d46a49b.camel@cybertec.at
Create a wrapper object, ParallelSlotArray, to encapsulate the
number of slots and the slot array itself, plus some other relevant
bits of information. This reduces the number of parameters we have
to pass around all over the place.
Allow for a ParallelSlotArray to contain slots connected to
different databases within a single cluster. The current clients
of this mechanism don't need this, but it is expected to be used
by future patches.
Defer connecting to databases until we actually need the connection
for something. This is a slight behavior change for vacuumdb and
reindexdb. If you specify a number of jobs that is larger than the
number of objects, the extra connections will now not be used.
But, on the other hand, if you specify a number of jobs that is
so large that it's going to fail, the failure would previously have
happened before any operations were actually started, and now it
won't.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/BA592F2D-F928-46FF-9516-2B827F067F57@enterprisedb.com
Remove the entire idea of "stale stats" within nbtree VACUUM (stop
caring about stats involving the number of inserted tuples). Also
remove the vacuum_cleanup_index_scale_factor GUC/param on the master
branch (though just disable them on postgres 13).
The vacuum_cleanup_index_scale_factor/stats interface made the nbtree AM
partially responsible for deciding when pg_class.reltuples stats needed
to be updated. This seems contrary to the spirit of the index AM API,
though -- it is not actually necessary for an index AM's bulk delete and
cleanup callbacks to provide accurate stats when it happens to be
inconvenient. The core code owns that. (Index AMs have the authority
to perform or not perform certain kinds of deferred cleanup based on
their own considerations, such as page deletion and recycling, but that
has little to do with pg_class.reltuples/num_index_tuples.)
This issue was fairly harmless until the introduction of the
autovacuum_vacuum_insert_threshold feature by commit b07642db, which had
an undesirable interaction with the vacuum_cleanup_index_scale_factor
mechanism: it made insert-driven autovacuums perform full index scans,
even though there is no real benefit to doing so. This has been tied to
a regression with an append-only insert benchmark [1].
Also have remaining cases that perform a full scan of an index during a
cleanup-only nbtree VACUUM indicate that the final tuple count is only
an estimate. This prevents vacuumlazy.c from setting the index's
pg_class.reltuples in those cases (it will now only update pg_class when
vacuumlazy.c had TIDs for nbtree to bulk delete). This arguably fixes
an oversight in deduplication-related bugfix commit 48e12913.
[1] https://smalldatum.blogspot.com/2021/01/insert-benchmark-postgres-is-still.html
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA4WHthN5uU6+WScZ7+J_RcEjmcuH94qcoUPuB42ShXzg@mail.gmail.com
Backpatch: 13-, where autovacuum_vacuum_insert_threshold was added.
Commit 547f04e7 produced errors on AIX/xlc while building plpython. The
new code appears to be incompatible with the hack installed by commit
a11cf433. Without access to an AIX system to check, my guess is that
_POSIX_C_SOURCE may be required for <time.h> to declare the things the
header needs to see, but plpython.h undefines it.
For now, to unbreak build farm animal hoverfly, just move the new
pg_time_usec_t support into pgbench.c. Perhaps later we could figure
out what to rearrange to put it back into a header for wider use.
Discussion: https://postgr.es/m/CA%2BhUKG%2BP%2BjcD%3Dx9%2BagyTdWtjpOT64MYiGic%2Bcbu_TD8CV%3D6A3w%40mail.gmail.com
1. pg_time_usec_t needs to be printed with INT64_FORMAT, not %ld, or 32
bit systems complain, per lapwing.
2. Some Windows compilers didn't like a thread function not marked with
__stdcall, per whelk; let's see if this fixes the problem.
Moving this logic into pg_regress fixes a potential failure with
parallel tests when pg_upgrade and the main regression test suite both
trigger the makefile rule that cleaned up testtablespace/ under
src/test/regress. Even if pg_upgrade was triggering this rule, it has
no need to do so as it uses a different tablespace path. So if
pg_upgrade triggered the makefile rule for the tablespace setup while
the main regression test suite ran the tablespace cases, it would fail.
61be85a was a similar attempt at achieving that, but that broke cases
where the regression tests require to run under an Administrator
account, like with Appveyor.
Reported-by: Andres Freund, Kyotaro Horiguchi
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/20201209012911.uk4d6nxcnkp7ehrx@alap3.anarazel.de
Wait until all pgbench threads are connected before benchmarking begins.
This fixes a problem where some connections could take a very long time
to be established because of lock contention from earlier connections,
making results unstable and bogus with high connection counts.
Author: Andres Freund <andres@anarazel.de>
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200227180100.zyvjwzcpiokfsqm2%40alap3.anarazel.de
Instead of instr_time (struct timespec) and the INSTR_XXX macros,
introduce pg_time_usec_t and use integer arithmetic. Don't include the
connection time in TPS unless using -C mode, but report it separately.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/20200227180100.zyvjwzcpiokfsqm2%40alap3.anarazel.de
Instead of maintaining an incomplete emulation of POSIX threads for
Windows, let's use an extremely minimalist macro-based abstraction for
now. A later patch will extend this, without the need to supply more
complicated pthread emulation code. (There may be a need for a more
serious portable thread abstraction in later projects, but this is not
it.)
Minor incidental problems fixed: it wasn't OK to use (pthread_t) 0 as a
special value, it wasn't OK to compare thread_t values with ==, and we
incorrectly assumed that pthread functions set errno.
Discussion: https://postgr.es/m/20200227180100.zyvjwzcpiokfsqm2%40alap3.anarazel.de
This partially reverts 096bbf7 and 9d2d457, undoing the libpq changes as
it could cause breakages in distributions that share one single libpq
version across multiple major versions of Postgres for extensions and
applications linking to that.
Note that the backend is unchanged here, and it still disables SSL
compression while simplifying the underlying catalogs that tracked if
compression was enabled or not for a SSL connection.
Per discussion with Tom Lane and Daniel Gustafsson.
Discussion: https://postgr.es/m/YEbq15JKJwIX+S6m@paquier.xyz
PostgreSQL disabled compression as of e3bdb2d and the documentation
recommends against using it since. Additionally, SSL compression has
been disabled in OpenSSL since version 1.1.0, and was disabled in many
distributions long before that. The most recent TLS version, TLSv1.3,
disallows compression at the protocol level.
This commit removes the feature itself, removing support for the libpq
parameter sslcompression (parameter still listed for compatibility
reasons with existing connection strings, just ignored), and removes
the equivalent field in pg_stat_ssl and de facto PgBackendSSLStatus.
Note that, on top of removing the ability to activate compression by
configuration, compression is actively disabled in both frontend and
backend to avoid overrides from local configurations.
A TAP test is added for deprecated SSL parameters to check after
backwards compatibility.
Bump catalog version.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/7E384D48-11C5-441B-9EC3-F7DB1F8518F6@yesql.se
Using pgbench in an environment with both PGPORT and PGUSER set would
have caused the generation of a debug log with an incorrect database
name due to an oversight in 412893b. Not specifying user, port and/or
database using the option switches, without their respective environment
variables, generated a log entry with empty strings, which was
rather useless.
This commit fixes this set of issues by simplifying the logic grabbing
the connection information, removing a set of getenv() calls that
emulated what libpq already does. The faulty debug log now directly
uses the information from the libpq connection, and it gets generated
after the connection to the backend is completed, not before it (in the
event of a failure libpq would complain with more information about the
connection attempt so the log is not really useful before anyway).
Author: Kota Miyake
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/026b3ae6fc339a18394d053c32a4463d@oss.nttdata.com
Protocol version 3 was introduced in PostgreSQL 7.4. There shouldn't be
many clients or servers left out there without version 3 support. But as
a courtesy, I kept just enough of the old protocol support that we can
still send the "unsupported protocol version" error in v2 format, so that
old clients can display the message properly. Likewise, libpq still
understands v2 ErrorResponse messages when establishing a connection.
The impetus to do this now is that I'm working on a patch to COPY
FROM, to always prefetch some data. We cannot do that safely with the
old protocol, because it requires parsing the input one byte at a time
to detect the end-of-copy marker.
Reviewed-by: Tom Lane, Alvaro Herrera, John Naylor
Discussion: https://www.postgresql.org/message-id/9ec25819-0a8a-d51a-17dc-4150bb3cca3b%40iki.fi
This expands the binary validation in pg_upgrade with a version
check per binary to ensure that the target cluster installation
only contains binaries from the target version.
In order to reduce duplication, validate_exec is exported from
port.h and the local copy in pg_upgrade is removed.
Author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
This option provides REINDEX (TABLESPACE) for reindexdb, applying the
tablespace value given by the caller to all the REINDEX queries
generated.
While on it, this commit adds some tests for REINDEX TABLESPACE, with
and without CONCURRENTLY, when run on toast indexes and tables. Such
operations are not allowed, and toast relation names are not stable
enough to be part of the main regression test suite (even if using a PL
function with a TRY/CATCH logic, as CONCURRENTLY could not be tested).
Author: Michael Paquier
Reviewed-by: Mark Dilger, Daniel Gustafsson
Discussion: https://postgr.es/m/YDiaDMnzLICqeukl@paquier.xyz
On Windows, CMD.EXE allegedly does not run a command that uses forward slashes,
so let's convert the path to use backslashes instead.
Backpatch to 10.
Author: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CAMm1aWaNDuaPYFYMAqDeJrZmPtNvLcJRS++CcZWY8LT6KcoBZw@mail.gmail.com
The same test for REINDEX (VERBOSE) was done twice, while it is clear
that the second test should use --concurrently. Issue introduced in
5dc92b8, for what looks like a copy-paste mistake.
Reviewed-by: Mark Dilger
Discussion: https://postgr.es/m/A7AE97EA-F4B0-4CAB-8FFF-3FECD31F9D63@enterprisedb.com
Backpatch-through: 12
When ON_ERROR_ROLLBACK is enabled, psql releases a temporary savepoint
if it's idle in a valid transaction block after executing a query. But psql
doesn't do that after RELEASE or ROLLBACK is executed because a temporary
savepoint has already been destroyed in that case.
This commit changes psql's ON_ERROR_ROLLBACK so that it doesn't release
a temporary savepoint also when COMMIT AND CHAIN is executed. A temporary
savepoint doesn't need to be released in that case because
COMMIT AND CHAIN also destroys any savepoints defined within the transaction
to commit. Otherwise psql tries to release the savepoint that
COMMIT AND CHAIN has already destroyed and cause an error
"ERROR: savepoint "pg_psql_temporary_savepoint" does not exist".
Back-patch to v12 where transaction chaining was added.
Reported-by: Arthur Nascimento
Author: Arthur Nascimento
Reviewed-by: Fujii Masao, Vik Fearing
Discussion: https://postgr.es/m/16867-3475744069228158@postgresql.org
ALTER INDEX was able to handle that already. This adds tab completion
for all the remaining commands that support this grammar:
- ALTER FUNCTION
- ALTER PROCEDURE
- ALTER ROUTINE
- ALTER TRIGGER
- ALTER MATERIALIZED VIEW
Author: Ian Lawrence Barwick
Discussion: https://postgr.es/m/CAB8KJ=iypYudXuMOAMOP4BpkaYbXxk=a2cdJppX0e9mJXWtuig@mail.gmail.com
With its current design, a careless use of pg_cryptohash_final() could
would result in an out-of-bound write in memory as the size of the
destination buffer to store the result digest is not known to the
cryptohash internals, without the caller knowing about that. This
commit adds a new argument to pg_cryptohash_final() to allow such sanity
checks, and implements such defenses.
The internals of SCRAM for HMAC could be tightened a bit more, but as
everything is based on SCRAM_KEY_LEN with uses particular to this code
there is no need to complicate its interface more than necessary, and
this comes back to the refactoring of HMAC in core. Except that, this
minimizes the uses of the existing DIGEST_LENGTH variables, relying
instead on sizeof() for the result sizes. In ossp-uuid, this also makes
the code more defensive, as it already relied on dce_uuid_t being at
least the size of a MD5 digest.
This is in philosophy similar to cfc40d3 for base64.c and aef8948 for
hex.c.
Reported-by: Ranier Vilela
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAEudQAoqEGmcff3J4sTSV-R_16Monuz-UpJFbf_dnVH=APr02Q@mail.gmail.com
This option controls if toast tables associated with a relation are
vacuumed or not when running a manual VACUUM. It was already possible
to trigger a manual VACUUM on a toast relation without processing its
main relation, but a manual vacuum on a main relation always forced a
vacuum on its toast table. This is useful in scenarios where the level
of bloat or transaction age of the main and toast relations differs a
lot.
This option is an extension of the existing VACOPT_SKIPTOAST that was
used by autovacuum to control if toast relations should be skipped or
not. This internal flag is renamed to VACOPT_PROCESS_TOAST for
consistency with the new option.
A new option switch, called --no-process-toast, is added to vacuumdb.
Author: Nathan Bossart
Reviewed-by: Kirk Jamison, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/BA8951E9-1524-48C5-94AF-73B1F0D7857F@amazon.com
The parallel slots infrastructure (which implements client-side
multiplexing of server connections doing similar things, not
threading or multiple processes or anything like that) are moved from
src/bin/scripts/scripts_parallel.c to src/fe_utils/parallel_slot.c.
The functions consumeQueryResult() and processQueryResult() which were
previously part of src/bin/scripts/common.c are now moved into that
file as well, becoming static helper functions. This might need to be
changed in the future, but currently they're not used for anything
else.
Some other functions from src/bin/scripts/common.c are moved to to
src/fe_utils and are split up among several files. connectDatabase(),
connectMaintenanceDatabase(), and disconnectDatabase() are moved to
connect_utils.c. executeQuery(), executeCommand(), and
executeMaintenanceCommand() are move to query_utils.c.
handle_help_version_opts() is moved to option_utils.c.
Mark Dilger, reviewed by me. The larger patch series of which this is
a part has also had review from Peter Geoghegan, Andres Freund, Álvaro
Herrera, Michael Paquier, and Amul Sul, but I don't know whether any
of them have reviewed this bit specifically.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/5F743835-3399-419C-8324-2D424237E999@enterprisedb.com
Discussion: http://postgr.es/m/70655DF3-33CE-4527-9A4D-DDEB582B6BA0@enterprisedb.com
This patch adds the possibility to move indexes to a new tablespace
while rebuilding them. Both the concurrent and the non-concurrent cases
are supported, and the following set of restrictions apply:
- When using TABLESPACE with a REINDEX command that targets a
partitioned table or index, all the indexes of the leaf partitions are
moved to the new tablespace. The tablespace references of the non-leaf,
partitioned tables in pg_class.reltablespace are not changed. This
requires an extra ALTER TABLE SET TABLESPACE.
- Any index on a toast table rebuilt as part of a parent table is kept
in its original tablespace.
- The operation is forbidden on system catalogs, including trying to
directly move a toast relation with REINDEX. This results in an error
if doing REINDEX on a single object. REINDEX SCHEMA, DATABASE and
SYSTEM skip system relations when TABLESPACE is used.
Author: Alexey Kondratov, Michael Paquier, Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/8a8f5f73-00d3-55f8-7583-1375ca8f6a91@postgrespro.ru
Generation expressions of generated columns are always inherited, so
there is no need to set them separately in child tables, and there is
no syntax to do so either. The code previously used the code paths
for the handling of default values, for which different rules apply;
in particular it might want to set a default value explicitly for an
inherited column. This resulted in unrestorable dumps. For generated
columns, just skip them in inherited tables.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/15830.1575468847%40sss.pgh.pa.us
For those system catalogs that have a unique indexes, make a primary
key and unique constraint, using ALTER TABLE ... PRIMARY KEY/UNIQUE
USING INDEX.
This can be helpful for GUI tools that look for a primary key, and it
might in the future allow declaring foreign keys, for making schema
diagrams.
The constraint creation statements are automatically created by
genbki.pl from DECLARE_UNIQUE_INDEX directives. To specify which one
of the available unique indexes is the primary key, use the new
directive DECLARE_UNIQUE_INDEX_PKEY instead. By convention, we
usually make a catalog's OID column its primary key, if it has one.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/dc5f44d9-5ec1-a596-0251-dadadcdede98@2ndquadrant.com
doConnect() never returns connections in state CONNECTION_BAD, so
checking for that is pointless. Remove the code that does.
This code has been dead since ba708ea3dc, 20 years ago.
Discussion: https://postgr.es/m/20210126195224.GA20361@alvherre.pgsql
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
CREATE TABLE AS has been preferred over SELECT INTO (outside of ecpg
and PL/pgSQL) for a long time. There were still a few uses of SELECT
INTO in tests and documentation, some old, some more recent. This
changes them to CREATE TABLE AS. Some occurrences in the tests remain
where they are specifically testing SELECT INTO parsing or similar.
Discussion: https://www.postgresql.org/message-id/flat/96dc0df3-e13a-a85d-d045-d6e2c85218da%40enterprisedb.com
The loops to identify word boundaries could access past the end of
the input string. Likely that would never result in an actual
crash, but it makes valgrind unhappy.
The logic to try different numbers of words didn't work when the
input has two words but we only have a match to the first, eg
"\h with select". (We must "continue" the pass loop, not "break".)
The logic to compute nl_count was bizarrely managed, and in at
least two code paths could end up calling PageOutput with
nl_count = 0, resulting in failing to paginate output that should
have been fed to the pager. Also, in v12 and up, the nl_count
calculation hadn't been updated to account for the addition of a URL.
The PQExpBuffer holding the command syntax details wasn't freed,
resulting in a session-lifespan memory leak.
While here, improve some comments, choose a more descriptive name
for a variable, fix inconsistent datatype choice for another variable.
Per bug #16837 from Alexander Lakhin. This code is very old,
so back-patch to all supported branches.
Kyotaro Horiguchi and Tom Lane
Discussion: https://postgr.es/m/16837-479bcd56040c71b3@postgresql.org
libpq's error messages for connection failures pretty well stand on
their own, especially since commits 52a10224e/27a48e5a1. Prefixing
them with 'could not connect to database "foo"' or the like is just
redundant, and perhaps even misleading if the specific database name
isn't relevant to the failure. (When it is, we trust that the
backend's error message will include the DB name.) Indeed, psql
hasn't used any such prefix in a long time. So, make all our other
programs and documentation examples agree with psql's practice.
Discussion: https://postgr.es/m/1094524.1611266589@sss.pgh.pa.us
"connection to server so-and-so failed:" seems clearer than the
previous wording "could not connect to so-and-so:" (introduced by
52a10224e), because the latter suggests a network-level connection
failure. We're now prefixing this string to all types of connection
failures, for instance authentication failures; so we need wording
that doesn't imply a low-level error.
Per discussion with Robert Haas.
Discussion: https://postgr.es/m/CA+TgmobssJ6rS22dspWnu-oDxXevGmhMD8VcRBjmj-b9UDqRjw@mail.gmail.com
The new command lists extended statistics objects. All past releases
with extended statistics are supported.
This is a simplified version of commit 891a1d0bca, which had to be
reverted due to not considering pg_statistic_ext_data is not accessible
by regular users. Fields requiring access to this catalog were removed.
It's possible to add them, but it'll require changes to core.
Author: Tatsuro Yamada
Reviewed-by: Julien Rouhaud, Alvaro Herrera, Tomas Vondra, Noriyoshi Shinoda
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
Specifying this parameter removes the informational messages about how
to start the server. This is intended for use by wrappers in different
packaging systems, where those instructions would most likely be wrong
anyway, but the other output from initdb would still be useful (and thus
just redirecting everything to /dev/null would be bad).
Author: Magnus Hagander
Reviewed-By: Peter Eisentraut
Discusion: https://postgr.es/m/CABUevEzo4t5bmTXF0_B9WzmuWpVbMpkNZZiGvzV8NZa-=fPqeQ@mail.gmail.com
The new command lists extended statistics objects, possibly with their
sizes. All past releases with extended statistics are supported.
Author: Tatsuro Yamada
Reviewed-by: Julien Rouhaud, Alvaro Herrera, Tomas Vondra
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
The context is an object that no longer bears some aclitem that it bore
initially. (A user issued REVOKE or GRANT statements upon the object.)
pg_dump is forming SQL to reproduce the object ACL. Since initdb
creates no ACL bearing GRANT OPTION, reaching this bug requires an
extension where the creation script establishes such an ACL. No PGXN
extension does that. If an installation did reach the bug, pg_dump
would have omitted a semicolon, causing a REVOKE and the next SQL
statement to fail. Separately, since the affected code exists to
eliminate an entire aclitem, it wants plain REVOKE, not REVOKE GRANT
OPTION FOR. Back-patch to 9.6, where commit
23f34fa4ba first appeared.
Discussion: https://postgr.es/m/20210109102423.GA160022@rfd.leadboat.com
This is the same fix as commit 9eabfe300 applied to INDEX ATTACH
entries, but for table-to-publication attachments. As in that
case, even though the backend doesn't record "ownership" of the
attachment, we still ought to label it in the dump archive with
the role name that should run the ALTER PUBLICATION command.
The existing behavior causes the ALTER to be done by the original
role that started the restore; that will usually work fine, but
there may be corner cases where it fails.
The bulk of the patch is concerned with changing struct
PublicationRelInfo to include a pointer to the associated
PublicationInfo object, so that we can get the owner's name
out of that when the time comes. While at it, I rewrote
getPublicationTables() to do just one query of pg_publication_rel,
not one per table.
Back-patch to v10 where this code was introduced.
Discussion: https://postgr.es/m/1165710.1610473242@sss.pgh.pa.us
This commit makes CLOSE, FETCH and MOVE commands tab-complete the list of
cursors. Also this commit makes DECLARE command tab-complete the options.
Author: Shinya Kato, Sawada Masahiko, tweaked by Fujii Masao
Reviewed-by: Shinya Kato, Sawada Masahiko, Fujii Masao
Discussion: https://postgr.es/m/b0e4c5c53ef84c5395524f5056fc71f0@MP-MSGSS-MBX001.msg.nttdata.co.jp
The point of this restriction is to avoid trying to substitute variables
into timestamp literal values, which may contain strings like '12:34'.
There is a good deal more that should be done to reduce pgbench's
tendency to substitute where it shouldn't. But this is sufficient to
solve the case complained of by Jaime Soler, and it's simple enough
to back-patch.
Back-patch to v11; before commit 9d36a3866, pgbench had a slightly
different definition of what a variable name is, and anyway it seems
unwise to change long-stable branches for this.
Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2006291740420.805678@pseudo
Although a partitioned index's attachment to its parent doesn't
have separate ownership, the ArchiveEntry for it needs to be
marked with an owner anyway, to ensure that the ALTER command
is run by the appropriate role when restoring with
--use-set-session-authorization. Without this, the ALTER will
be run by the role that started the restore session, which will
usually work but it's formally the wrong thing.
Back-patch to v11 where this type of ArchiveEntry was added.
In HEAD, add equivalent commentary to the just-added TABLE ATTACH
case, which I'd made do the right thing already.
Discussion: https://postgr.es/m/1094034.1610418498@sss.pgh.pa.us
Previously, we emitted the ATTACH PARTITION command as part of
the child table's ArchiveEntry. This was a poor choice since it
complicates restoring the partition as a standalone table; you have
to ignore the error from the ATTACH, which isn't even an option when
restoring direct-to-database with pg_restore. (pg_restore will issue
the whole ArchiveEntry as one PQexec, so that any error rolls back
the table creation as well.) Hence, separate it out as its own
ArchiveEntry, as indeed we already did for index ATTACH PARTITION
commands.
Justin Pryzby
Discussion: https://postgr.es/m/20201023052940.GE9241@telsasoft.com
Wedging a new object type into this table has historically required
manually renumbering a lot of existing entries. (Although it appears
that some people got lazy and re-used the priority level of an
existing object type, even if it wasn't particularly related.)
We can let the compiler do the counting by inventing an enum type that
lists the desired priority levels in order. Now, if you want to add
or remove a priority level, that's a one-liner.
This patch is not purely cosmetic, because I split apart the priorities
of DO_COLLATION and DO_TRANSFORM, as well as those of DO_ACCESS_METHOD
and DO_OPERATOR, which look to me to have been merged out of expediency
rather than because it was a good idea. Shell types continue to be
sorted interchangeably with full types, and opclasses interchangeably
with opfamilies.
Prefix "could not connect to host-or-socket-path:" to all connection
failure cases that occur after the socket() call, and remove the
ad-hoc server identity data that was appended to a few of these
messages. This should produce much more intelligible error reports
in multiple-target-host situations, especially for error cases that
are off the beaten track to any degree (because none of those provided
any server identity info).
As an example of the change, formerly a connection attempt with a bad
port number such as "psql -p 12345 -h localhost,/tmp" might produce
psql: error: could not connect to server: Connection refused
Is the server running on host "localhost" (::1) and accepting
TCP/IP connections on port 12345?
could not connect to server: Connection refused
Is the server running on host "localhost" (127.0.0.1) and accepting
TCP/IP connections on port 12345?
could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.12345"?
Now it looks like
psql: error: could not connect to host "localhost" (::1), port 12345: Connection refused
Is the server running on that host and accepting TCP/IP connections?
could not connect to host "localhost" (127.0.0.1), port 12345: Connection refused
Is the server running on that host and accepting TCP/IP connections?
could not connect to socket "/tmp/.s.PGSQL.12345": No such file or directory
Is the server running locally and accepting connections on that socket?
This requires adjusting a couple of regression tests to allow for
variation in the contents of a connection failure message.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
We found last February that the error-case tests added by commit
008cf0409 failed on OpenBSD, because that platform doesn't really
check locale names. At the time it seemed that that was only an issue
for LC_CTYPE, but testing on a more recent version of OpenBSD shows
that it's now equally lax about LC_COLLATE.
Rather than dropping the LC_COLLATE test too, put back LC_CTYPE
(reverting c4b0edb07), and adjust these tests to accept the different
error message that we get if setlocale() doesn't reject a bogus locale
name. The point of these tests is not really what the backend does
with the locale name, but to show that createdb quotes funny locale
names safely; so we're not losing test reliability this way.
Back-patch as appropriate.
Discussion: https://postgr.es/m/231373.1610058324@sss.pgh.pa.us
Formerly, TOAST objects were unconditionally suppressed, but since
\d is able to print them it's not very clear why these variants
should not. Instead, use the same rules as for system catalogs:
they can be seen if you write the 'S' modifier or a table name
pattern. (In practice, since hardly anybody would keep pg_toast
in their search_path, it's really down to whether you use a pattern
that can match pg_toast.*.)
No docs change seems necessary because the docs already say that
this happens for "system objects"; we're just classifying TOAST
tables as being that.
Justin Pryzby, reviewed by Laurenz Albe
Discussion: https://postgr.es/m/20201130165436.GX24052@telsasoft.com
Commit 7ca37fb04 removed regress_putenv from the regress.so library,
so reloading a SQL function dependent on that would not work.
Fix similarly to 52202bb39.
Per buildfarm.
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
